diff options
Diffstat (limited to 'target/linux/lantiq/files/arch')
90 files changed, 23974 insertions, 0 deletions
diff --git a/target/linux/lantiq/files/arch/mips/configs/ase_defconfig b/target/linux/lantiq/files/arch/mips/configs/ase_defconfig new file mode 100644 index 000000000..5bb1d93eb --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/configs/ase_defconfig @@ -0,0 +1,67 @@ +CONFIG_LANTIQ=y +CONFIG_SOC_AMAZON_SE=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_EXPERIMENTAL=y +CONFIG_DEFAULT_HOSTNAME="amazon_se" +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt" +CONFIG_INITRAMFS_ROOT_UID=1000 +CONFIG_INITRAMFS_ROOT_GID=1000 ++# CONFIG_RD_GZIP is not set +CONFIG_RD_LZMA=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_NETFILTER=y +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=y +CONFIG_NET_SCHED=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_LANTIQ=y +CONFIG_MISC_DEVICES=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_LANTIQ_ETOP=y +CONFIG_PHYLIB=y +CONFIG_SERIAL_LANTIQ=y +CONFIG_PINCTRL=y +CONFIG_GPIO_SYSFS=y +CONFIG_WATCHDOG=y +CONFIG_LANTIQ_WDT=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y diff --git a/target/linux/lantiq/files/arch/mips/configs/falcon_defconfig b/target/linux/lantiq/files/arch/mips/configs/falcon_defconfig new file mode 100644 index 000000000..ce242a88e --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/configs/falcon_defconfig @@ -0,0 +1,72 @@ +CONFIG_LANTIQ=y +CONFIG_SOC_FALCON=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_EXPERIMENTAL=y +CONFIG_DEFAULT_HOSTNAME="falcon" +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt" +CONFIG_INITRAMFS_ROOT_UID=1000 +CONFIG_INITRAMFS_ROOT_GID=1000 ++# CONFIG_RD_GZIP is not set +CONFIG_RD_LZMA=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_NETFILTER=y +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=y +CONFIG_NET_SCHED=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_LANTIQ=y +CONFIG_MTD_M25P80=y +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT24=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_SERIAL_LANTIQ=y +CONFIG_I2C=y +CONFIG_I2C_FALCON=y +CONFIG_SPI=y +CONFIG_SPI_FALCON=y +CONFIG_PINCTRL=y +CONFIG_GPIO_SYSFS=y +CONFIG_WATCHDOG=y +CONFIG_LANTIQ_WDT=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y diff --git a/target/linux/lantiq/files/arch/mips/configs/xway_defconfig b/target/linux/lantiq/files/arch/mips/configs/xway_defconfig new file mode 100644 index 000000000..510a9641d --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/configs/xway_defconfig @@ -0,0 +1,66 @@ +CONFIG_LANTIQ=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_EXPERIMENTAL=y +CONFIG_DEFAULT_HOSTNAME="danube" +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt" +CONFIG_INITRAMFS_ROOT_UID=1000 +CONFIG_INITRAMFS_ROOT_GID=1000 +# CONFIG_RD_GZIP is not set +CONFIG_RD_LZMA=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_NETFILTER=y +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=y +CONFIG_NET_SCHED=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_LANTIQ=y +CONFIG_MISC_DEVICES=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_LANTIQ_ETOP=y +CONFIG_PHYLIB=y +CONFIG_SERIAL_LANTIQ=y +CONFIG_PINCTRL=y +CONFIG_GPIO_SYSFS=y +CONFIG_WATCHDOG=y +CONFIG_LANTIQ_WDT=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y diff --git a/target/linux/lantiq/files/arch/mips/include/asm/clkdev.h b/target/linux/lantiq/files/arch/mips/include/asm/clkdev.h new file mode 100644 index 000000000..262475414 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/clkdev.h @@ -0,0 +1,25 @@ +/* + * based on arch/arm/include/asm/clkdev.h + * + * Copyright (C) 2008 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Helper for the clk API to assist looking up a struct clk. + */ +#ifndef __ASM_CLKDEV_H +#define __ASM_CLKDEV_H + +#include <linux/slab.h> + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) +{ + return kzalloc(size, GFP_KERNEL); +} + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h new file mode 100644 index 000000000..adb531c39 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h @@ -0,0 +1,26 @@ +/* + * Lantiq GPIO button support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _LANTIQ_DEV_GPIO_BUTTONS_H +#define _LANTIQ_DEV_GPIO_BUTTONS_H + +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#define LTQ_KEYS_POLL_INTERVAL 20 /* msecs */ +#define LTQ_KEYS_DEBOUNCE_INTERVAL (3 * LTQ_KEYS_POLL_INTERVAL) + +void ltq_register_gpio_keys_polled(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons); + +#endif /* _LANTIQ_DEV_GPIO_BUTTONS_H */ diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h new file mode 100644 index 000000000..d51e496d1 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h @@ -0,0 +1,21 @@ +/* + * Lantiq GPIO LED device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _LANTIQ_DEV_LEDS_GPIO_H +#define _LANTIQ_DEV_LEDS_GPIO_H + +#include <linux/leds.h> + +void ltq_add_device_gpio_leds(int id, + unsigned num_leds, + struct gpio_led *leds) __init; + +#endif /* _LANTIQ_DEV_LEDS_GPIO_H */ diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h new file mode 100644 index 000000000..4dc6466e8 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h @@ -0,0 +1,268 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com> + */ + +#ifndef _FALCON_IRQ__ +#define _FALCON_IRQ__ + +#define INT_NUM_IRQ0 8 +#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) +#define INT_NUM_IM1_IRL0 (INT_NUM_IM0_IRL0 + 32) +#define INT_NUM_IM2_IRL0 (INT_NUM_IM1_IRL0 + 32) +#define INT_NUM_IM3_IRL0 (INT_NUM_IM2_IRL0 + 32) +#define INT_NUM_IM4_IRL0 (INT_NUM_IM3_IRL0 + 32) +#define INT_NUM_EXTRA_START (INT_NUM_IM4_IRL0 + 32) +#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0) + +#define MIPS_CPU_TIMER_IRQ 7 + +/* HOST IF Event Interrupt */ +#define FALCON_IRQ_HOST (INT_NUM_IM0_IRL0 + 0) +/* HOST IF Mailbox0 Receive Interrupt */ +#define FALCON_IRQ_HOST_MB0_RX (INT_NUM_IM0_IRL0 + 1) +/* HOST IF Mailbox0 Transmit Interrupt */ +#define FALCON_IRQ_HOST_MB0_TX (INT_NUM_IM0_IRL0 + 2) +/* HOST IF Mailbox1 Receive Interrupt */ +#define FALCON_IRQ_HOST_MB1_RX (INT_NUM_IM0_IRL0 + 3) +/* HOST IF Mailbox1 Transmit Interrupt */ +#define FALCON_IRQ_HOST_MB1_TX (INT_NUM_IM0_IRL0 + 4) +/* I2C Last Single Data Transfer Request */ +#define FALCON_IRQ_I2C_LSREQ (INT_NUM_IM0_IRL0 + 8) +/* I2C Single Data Transfer Request */ +#define FALCON_IRQ_I2C_SREQ (INT_NUM_IM0_IRL0 + 9) +/* I2C Last Burst Data Transfer Request */ +#define FALCON_IRQ_I2C_LBREQ (INT_NUM_IM0_IRL0 + 10) +/* I2C Burst Data Transfer Request */ +#define FALCON_IRQ_I2C_BREQ (INT_NUM_IM0_IRL0 + 11) +/* I2C Error Interrupt */ +#define FALCON_IRQ_I2C_I2C_ERR (INT_NUM_IM0_IRL0 + 12) +/* I2C Protocol Interrupt */ +#define FALCON_IRQ_I2C_I2C_P (INT_NUM_IM0_IRL0 + 13) +/* SSC Transmit Interrupt */ +#define FALCON_IRQ_SSC_T (INT_NUM_IM0_IRL0 + 14) +/* SSC Receive Interrupt */ +#define FALCON_IRQ_SSC_R (INT_NUM_IM0_IRL0 + 15) +/* SSC Error Interrupt */ +#define FALCON_IRQ_SSC_E (INT_NUM_IM0_IRL0 + 16) +/* SSC Frame Interrupt */ +#define FALCON_IRQ_SSC_F (INT_NUM_IM0_IRL0 + 17) +/* Advanced Encryption Standard Interrupt */ +#define FALCON_IRQ_AES_AES (INT_NUM_IM0_IRL0 + 27) +/* Secure Hash Algorithm Interrupt */ +#define FALCON_IRQ_SHA_HASH (INT_NUM_IM0_IRL0 + 28) +/* PCM Receive Interrupt */ +#define FALCON_IRQ_PCM_RX (INT_NUM_IM0_IRL0 + 29) +/* PCM Transmit Interrupt */ +#define FALCON_IRQ_PCM_TX (INT_NUM_IM0_IRL0 + 30) +/* PCM Transmit Crash Interrupt */ +#define FALCON_IRQ_PCM_HW2_CRASH (INT_NUM_IM0_IRL0 + 31) + +/* EBU Serial Flash Command Error */ +#define FALCON_IRQ_EBU_SF_CMDERR (INT_NUM_IM1_IRL0 + 0) +/* EBU Serial Flash Command Overwrite Error */ +#define FALCON_IRQ_EBU_SF_COVERR (INT_NUM_IM1_IRL0 + 1) +/* EBU Serial Flash Busy */ +#define FALCON_IRQ_EBU_SF_BUSY (INT_NUM_IM1_IRL0 + 2) +/* External Interrupt from GPIO P0 */ +#define FALCON_IRQ_GPIO_P0 (INT_NUM_IM1_IRL0 + 4) +/* External Interrupt from GPIO P1 */ +#define FALCON_IRQ_GPIO_P1 (INT_NUM_IM1_IRL0 + 5) +/* External Interrupt from GPIO P2 */ +#define FALCON_IRQ_GPIO_P2 (INT_NUM_IM1_IRL0 + 6) +/* External Interrupt from GPIO P3 */ +#define FALCON_IRQ_GPIO_P3 (INT_NUM_IM1_IRL0 + 7) +/* External Interrupt from GPIO P4 */ +#define FALCON_IRQ_GPIO_P4 (INT_NUM_IM1_IRL0 + 8) +/* 8kHz backup interrupt derived from core-PLL */ +#define FALCON_IRQ_FSC_BKP (INT_NUM_IM1_IRL0 + 10) +/* FSC Timer Interrupt 0 */ +#define FALCON_IRQ_FSCT_CMP0 (INT_NUM_IM1_IRL0 + 11) +/* FSC Timer Interrupt 1 */ +#define FALCON_IRQ_FSCT_CMP1 (INT_NUM_IM1_IRL0 + 12) +/* 8kHz root interrupt derived from GPON interface */ +#define FALCON_IRQ_FSC_ROOT (INT_NUM_IM1_IRL0 + 13) +/* Time of Day */ +#define FALCON_IRQ_TOD (INT_NUM_IM1_IRL0 + 14) +/* PMA Interrupt from IntNode of the 200MHz Domain */ +#define FALCON_IRQ_PMA_200M (INT_NUM_IM1_IRL0 + 15) +/* PMA Interrupt from IntNode of the TX Clk Domain */ +#define FALCON_IRQ_PMA_TX (INT_NUM_IM1_IRL0 + 16) +/* PMA Interrupt from IntNode of the RX Clk Domain */ +#define FALCON_IRQ_PMA_RX (INT_NUM_IM1_IRL0 + 17) +/* SYS1 Interrupt */ +#define FALCON_IRQ_SYS1 (INT_NUM_IM1_IRL0 + 20) +/* SYS GPE Interrupt */ +#define FALCON_IRQ_SYS_GPE (INT_NUM_IM1_IRL0 + 21) +/* Watchdog Access Error Interrupt */ +#define FALCON_IRQ_WDT_AEIR (INT_NUM_IM1_IRL0 + 24) +/* Watchdog Prewarning Interrupt */ +#define FALCON_IRQ_WDT_PIR (INT_NUM_IM1_IRL0 + 25) +/* SBIU interrupt */ +#define FALCON_IRQ_SBIU0 (INT_NUM_IM1_IRL0 + 27) +/* FPI Bus Control Unit Interrupt */ +#define FALCON_IRQ_BCU0 (INT_NUM_IM1_IRL0 + 29) +/* DDR Controller Interrupt */ +#define FALCON_IRQ_DDR (INT_NUM_IM1_IRL0 + 30) +/* Crossbar Error Interrupt */ +#define FALCON_IRQ_XBAR_ERROR (INT_NUM_IM1_IRL0 + 31) + +/* ICTRLL 0 Interrupt */ +#define FALCON_IRQ_ICTRLL0 (INT_NUM_IM2_IRL0 + 0) +/* ICTRLL 1 Interrupt */ +#define FALCON_IRQ_ICTRLL1 (INT_NUM_IM2_IRL0 + 1) +/* ICTRLL 2 Interrupt */ +#define FALCON_IRQ_ICTRLL2 (INT_NUM_IM2_IRL0 + 2) +/* ICTRLL 3 Interrupt */ +#define FALCON_IRQ_ICTRLL3 (INT_NUM_IM2_IRL0 + 3) +/* OCTRLL 0 Interrupt */ +#define FALCON_IRQ_OCTRLL0 (INT_NUM_IM2_IRL0 + 4) +/* OCTRLL 1 Interrupt */ +#define FALCON_IRQ_OCTRLL1 (INT_NUM_IM2_IRL0 + 5) +/* OCTRLL 2 Interrupt */ +#define FALCON_IRQ_OCTRLL2 (INT_NUM_IM2_IRL0 + 6) +/* OCTRLL 3 Interrupt */ +#define FALCON_IRQ_OCTRLL3 (INT_NUM_IM2_IRL0 + 7) +/* OCTRLG Interrupt */ +#define FALCON_IRQ_OCTRLG (INT_NUM_IM2_IRL0 + 9) +/* IQM Interrupt */ +#define FALCON_IRQ_IQM (INT_NUM_IM2_IRL0 + 10) +/* FSQM Interrupt */ +#define FALCON_IRQ_FSQM (INT_NUM_IM2_IRL0 + 11) +/* TMU Interrupt */ +#define FALCON_IRQ_TMU (INT_NUM_IM2_IRL0 + 12) +/* LINK1 Interrupt */ +#define FALCON_IRQ_LINK1 (INT_NUM_IM2_IRL0 + 14) +/* ICTRLC 0 Interrupt */ +#define FALCON_IRQ_ICTRLC0 (INT_NUM_IM2_IRL0 + 16) +/* ICTRLC 1 Interrupt */ +#define FALCON_IRQ_ICTRLC1 (INT_NUM_IM2_IRL0 + 17) +/* OCTRLC Interrupt */ +#define FALCON_IRQ_OCTRLC (INT_NUM_IM2_IRL0 + 18) +/* CONFIG Break Interrupt */ +#define FALCON_IRQ_CONFIG_BREAK (INT_NUM_IM2_IRL0 + 19) +/* CONFIG Interrupt */ +#define FALCON_IRQ_CONFIG (INT_NUM_IM2_IRL0 + 20) +/* Dispatcher Interrupt */ +#define FALCON_IRQ_DISP (INT_NUM_IM2_IRL0 + 21) +/* TBM Interrupt */ +#define FALCON_IRQ_TBM (INT_NUM_IM2_IRL0 + 22) +/* GTC Downstream Interrupt */ +#define FALCON_IRQ_GTC_DS (INT_NUM_IM2_IRL0 + 29) +/* GTC Upstream Interrupt */ +#define FALCON_IRQ_GTC_US (INT_NUM_IM2_IRL0 + 30) +/* EIM Interrupt */ +#define FALCON_IRQ_EIM (INT_NUM_IM2_IRL0 + 31) + +/* ASC0 Transmit Interrupt */ +#define FALCON_IRQ_ASC0_T (INT_NUM_IM3_IRL0 + 0) +/* ASC0 Receive Interrupt */ +#define FALCON_IRQ_ASC0_R (INT_NUM_IM3_IRL0 + 1) +/* ASC0 Error Interrupt */ +#define FALCON_IRQ_ASC0_E (INT_NUM_IM3_IRL0 + 2) +/* ASC0 Transmit Buffer Interrupt */ +#define FALCON_IRQ_ASC0_TB (INT_NUM_IM3_IRL0 + 3) +/* ASC0 Autobaud Start Interrupt */ +#define FALCON_IRQ_ASC0_ABST (INT_NUM_IM3_IRL0 + 4) +/* ASC0 Autobaud Detection Interrupt */ +#define FALCON_IRQ_ASC0_ABDET (INT_NUM_IM3_IRL0 + 5) +/* ASC1 Modem Status Interrupt */ +#define FALCON_IRQ_ASC0_MS (INT_NUM_IM3_IRL0 + 6) +/* ASC0 Soft Flow Control Interrupt */ +#define FALCON_IRQ_ASC0_SFC (INT_NUM_IM3_IRL0 + 7) +/* ASC1 Transmit Interrupt */ +#define FALCON_IRQ_ASC1_T (INT_NUM_IM3_IRL0 + 8) +/* ASC1 Receive Interrupt */ +#define FALCON_IRQ_ASC1_R (INT_NUM_IM3_IRL0 + 9) +/* ASC1 Error Interrupt */ +#define FALCON_IRQ_ASC1_E (INT_NUM_IM3_IRL0 + 10) +/* ASC1 Transmit Buffer Interrupt */ +#define FALCON_IRQ_ASC1_TB (INT_NUM_IM3_IRL0 + 11) +/* ASC1 Autobaud Start Interrupt */ +#define FALCON_IRQ_ASC1_ABST (INT_NUM_IM3_IRL0 + 12) +/* ASC1 Autobaud Detection Interrupt */ +#define FALCON_IRQ_ASC1_ABDET (INT_NUM_IM3_IRL0 + 13) +/* ASC1 Modem Status Interrupt */ +#define FALCON_IRQ_ASC1_MS (INT_NUM_IM3_IRL0 + 14) +/* ASC1 Soft Flow Control Interrupt */ +#define FALCON_IRQ_ASC1_SFC (INT_NUM_IM3_IRL0 + 15) +/* GPTC Timer/Counter 1A Interrupt */ +#define FALCON_IRQ_GPTC_TC1A (INT_NUM_IM3_IRL0 + 16) +/* GPTC Timer/Counter 1B Interrupt */ +#define FALCON_IRQ_GPTC_TC1B (INT_NUM_IM3_IRL0 + 17) +/* GPTC Timer/Counter 2A Interrupt */ +#define FALCON_IRQ_GPTC_TC2A (INT_NUM_IM3_IRL0 + 18) +/* GPTC Timer/Counter 2B Interrupt */ +#define FALCON_IRQ_GPTC_TC2B (INT_NUM_IM3_IRL0 + 19) +/* GPTC Timer/Counter 3A Interrupt */ +#define FALCON_IRQ_GPTC_TC3A (INT_NUM_IM3_IRL0 + 20) +/* GPTC Timer/Counter 3B Interrupt */ +#define FALCON_IRQ_GPTC_TC3B (INT_NUM_IM3_IRL0 + 21) +/* DFEV0, Channel 1 Transmit Interrupt */ +#define FALCON_IRQ_DFEV0_2TX (INT_NUM_IM3_IRL0 + 26) +/* DFEV0, Channel 1 Receive Interrupt */ +#define FALCON_IRQ_DFEV0_2RX (INT_NUM_IM3_IRL0 + 27) +/* DFEV0, Channel 1 General Purpose Interrupt */ +#define FALCON_IRQ_DFEV0_2GP (INT_NUM_IM3_IRL0 + 28) +/* DFEV0, Channel 0 Transmit Interrupt */ +#define FALCON_IRQ_DFEV0_1TX (INT_NUM_IM3_IRL0 + 29) +/* DFEV0, Channel 0 Receive Interrupt */ +#define FALCON_IRQ_DFEV0_1RX (INT_NUM_IM3_IRL0 + 30) +/* DFEV0, Channel 0 General Purpose Interrupt */ +#define FALCON_IRQ_DFEV0_1GP (INT_NUM_IM3_IRL0 + 31) + +/* ICTRLL 0 Error */ +#define FALCON_IRQ_ICTRLL0_ERR (INT_NUM_IM4_IRL0 + 0) +/* ICTRLL 1 Error */ +#define FALCON_IRQ_ICTRLL1_ERR (INT_NUM_IM4_IRL0 + 1) +/* ICTRLL 2 Error */ +#define FALCON_IRQ_ICTRLL2_ERR (INT_NUM_IM4_IRL0 + 2) +/* ICTRLL 3 Error */ +#define FALCON_IRQ_ICTRLL3_ERR (INT_NUM_IM4_IRL0 + 3) +/* OCTRLL 0 Error */ +#define FALCON_IRQ_OCTRLL0_ERR (INT_NUM_IM4_IRL0 + 4) +/* OCTRLL 1 Error */ +#define FALCON_IRQ_OCTRLL1_ERR (INT_NUM_IM4_IRL0 + 5) +/* OCTRLL 2 Error */ +#define FALCON_IRQ_OCTRLL2_ERR (INT_NUM_IM4_IRL0 + 6) +/* OCTRLL 3 Error */ +#define FALCON_IRQ_OCTRLL3_ERR (INT_NUM_IM4_IRL0 + 7) +/* ICTRLG Error */ +#define FALCON_IRQ_ICTRLG_ERR (INT_NUM_IM4_IRL0 + 8) +/* OCTRLG Error */ +#define FALCON_IRQ_OCTRLG_ERR (INT_NUM_IM4_IRL0 + 9) +/* IQM Error */ +#define FALCON_IRQ_IQM_ERR (INT_NUM_IM4_IRL0 + 10) +/* FSQM Error */ +#define FALCON_IRQ_FSQM_ERR (INT_NUM_IM4_IRL0 + 11) +/* TMU Error */ +#define FALCON_IRQ_TMU_ERR (INT_NUM_IM4_IRL0 + 12) +/* MPS Status Interrupt #0 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR0 (INT_NUM_IM4_IRL0 + 14) +/* MPS Status Interrupt #1 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR1 (INT_NUM_IM4_IRL0 + 15) +/* MPS Status Interrupt #2 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR2 (INT_NUM_IM4_IRL0 + 16) +/* MPS Status Interrupt #3 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR3 (INT_NUM_IM4_IRL0 + 17) +/* MPS Status Interrupt #4 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR4 (INT_NUM_IM4_IRL0 + 18) +/* MPS Status Interrupt #5 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR5 (INT_NUM_IM4_IRL0 + 19) +/* MPS Status Interrupt #6 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR6 (INT_NUM_IM4_IRL0 + 20) +/* MPS Status Interrupt #7 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR7 (INT_NUM_IM4_IRL0 + 21) +/* MPS Status Interrupt #8 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR8 (INT_NUM_IM4_IRL0 + 22) +/* VPE0 Exception Level Flag Interrupt */ +#define FALCON_IRQ_VPE0_EXL (INT_NUM_IM4_IRL0 + 29) +/* VPE0 Error Level Flag Interrupt */ +#define FALCON_IRQ_VPE0_ERL (INT_NUM_IM4_IRL0 + 30) +/* VPE0 Performance Monitoring Counter Interrupt */ +#define FALCON_IRQ_VPE0_PMCIR (INT_NUM_IM4_IRL0 + 31) + +#endif /* _FALCON_IRQ__ */ diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/irq.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/irq.h new file mode 100644 index 000000000..2caccd9f9 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/irq.h @@ -0,0 +1,18 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + */ + +#ifndef __FALCON_IRQ_H +#define __FALCON_IRQ_H + +#include <falcon_irq.h> + +#define NR_IRQS 328 + +#include_next <irq.h> + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h new file mode 100644 index 000000000..fff5ecdbe --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h @@ -0,0 +1,152 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_FALCON_H__ +#define _LTQ_FALCON_H__ + +#ifdef CONFIG_SOC_FALCON + +#include <lantiq.h> + +/* Chip IDs */ +#define SOC_ID_FALCON 0x01B8 + +/* SoC Types */ +#define SOC_TYPE_FALCON 0x01 + +/* ASC0/1 - serial port */ +#define LTQ_ASC0_BASE_ADDR 0x1E100C00 +#define LTQ_ASC1_BASE_ADDR 0x1E100B00 +#define LTQ_ASC_SIZE 0x100 + +#define LTQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 8)) +#define LTQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 1) +#define LTQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 2) + +/* + * during early_printk no ioremap possible at this early stage + * lets use KSEG1 instead + */ +#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC0_BASE_ADDR) + +/* ICU - interrupt control unit */ +#define LTQ_ICU_BASE_ADDR 0x1F880200 +#define LTQ_ICU_SIZE 0x100 + +/* WDT */ +#define LTQ_WDT_BASE_ADDR 0x1F8803F0 +#define LTQ_WDT_SIZE 0x10 + +#define LTQ_RST_CAUSE_WDTRST 0x0002 + +/* EBU - external bus unit */ +#define LTQ_EBU_BASE_ADDR 0x18000000 +#define LTQ_EBU_SIZE 0x0100 + +#define LTQ_EBU_MODCON 0x000C + +/* GPIO */ +#define LTQ_GPIO0_BASE_ADDR 0x1D810000 +#define LTQ_GPIO0_SIZE 0x0080 +#define LTQ_GPIO1_BASE_ADDR 0x1E800100 +#define LTQ_GPIO1_SIZE 0x0080 +#define LTQ_GPIO2_BASE_ADDR 0x1D810100 +#define LTQ_GPIO2_SIZE 0x0080 +#define LTQ_GPIO3_BASE_ADDR 0x1E800200 +#define LTQ_GPIO3_SIZE 0x0080 +#define LTQ_GPIO4_BASE_ADDR 0x1E800300 +#define LTQ_GPIO4_SIZE 0x0080 +#define LTQ_PADCTRL0_BASE_ADDR 0x1DB01000 +#define LTQ_PADCTRL0_SIZE 0x0100 +#define LTQ_PADCTRL1_BASE_ADDR 0x1E800400 +#define LTQ_PADCTRL1_SIZE 0x0100 +#define LTQ_PADCTRL2_BASE_ADDR 0x1DB02000 +#define LTQ_PADCTRL2_SIZE 0x0100 +#define LTQ_PADCTRL3_BASE_ADDR 0x1E800500 +#define LTQ_PADCTRL3_SIZE 0x0100 +#define LTQ_PADCTRL4_BASE_ADDR 0x1E800600 +#define LTQ_PADCTRL4_SIZE 0x0100 + +/* I2C */ +#define GPON_I2C_BASE 0x1E200000 +#define GPON_I2C_SIZE 0x00010000 + +/* CHIP ID */ +#define LTQ_STATUS_BASE_ADDR 0x1E802000 + +#define LTQ_FALCON_CHIPID ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x0c)) +#define LTQ_FALCON_CHIPTYPE ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x38)) +#define LTQ_FALCON_CHIPCONF ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x40)) + +/* SYSCTL - start/stop/restart/configure/... different parts of the Soc */ +#define LTQ_SYS1_BASE_ADDR 0x1EF00000 +#define LTQ_SYS1_SIZE 0x0100 +#define LTQ_STATUS_BASE_ADDR 0x1E802000 +#define LTQ_STATUS_SIZE 0x0080 +#define LTQ_SYS_ETH_BASE_ADDR 0x1DB00000 +#define LTQ_SYS_ETH_SIZE 0x0100 +#define LTQ_SYS_GPE_BASE_ADDR 0x1D700000 +#define LTQ_SYS_GPE_SIZE 0x0100 + +#define SYSCTL_SYS1 0 +#define SYSCTL_SYSETH 1 +#define SYSCTL_SYSGPE 2 + +/* Activation Status Register */ +#define ACTS_ASC1_ACT 0x00000800 +#define ACTS_I2C_ACT 0x00004000 +#define ACTS_P0 0x00010000 +#define ACTS_P1 0x00010000 +#define ACTS_P2 0x00020000 +#define ACTS_P3 0x00020000 +#define ACTS_P4 0x00040000 +#define ACTS_PADCTRL0 0x00100000 +#define ACTS_PADCTRL1 0x00100000 +#define ACTS_PADCTRL2 0x00200000 +#define ACTS_PADCTRL3 0x00200000 +#define ACTS_PADCTRL4 0x00400000 +#define ACTS_I2C_ACT 0x00004000 + +/* global register ranges */ +extern __iomem void *ltq_ebu_membase; +extern __iomem void *ltq_sys1_membase; +#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y)) +#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x)) +#define ltq_ebu_w32_mask(clear, set, reg) \ + ltq_ebu_w32((ltq_ebu_r32(reg) & ~(clear)) | (set), reg) + +#define ltq_sys1_w32(x, y) ltq_w32((x), ltq_sys1_membase + (y)) +#define ltq_sys1_r32(x) ltq_r32(ltq_sys1_membase + (x)) +#define ltq_sys1_w32_mask(clear, set, reg) \ + ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg) + +/* gpio wrapper to help configure the pin muxing */ +extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux); + +/* to keep the irq code generic we need to define these to 0 as falcon + has no EIU/EBU */ +#define LTQ_EIU_BASE_ADDR 0 +#define LTQ_EBU_PCC_ISTAT 0 + +static inline int ltq_is_ar9(void) +{ + return 0; +} + +static inline int ltq_is_vr9(void) +{ + return 0; +} + +static inline int ltq_is_falcon(void) +{ + return 1; +} + +#endif /* CONFIG_SOC_FALCON */ +#endif /* _LTQ_XWAY_H__ */ diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/lantiq_timer.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/lantiq_timer.h new file mode 100644 index 000000000..ef564abc3 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/lantiq_timer.h @@ -0,0 +1,155 @@ +#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ +#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ + + +/****************************************************************************** + Copyright (c) 2002, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. +******************************************************************************/ + + +/* + * #################################### + * Definition + * #################################### + */ + +/* + * Available Timer/Counter Index + */ +#define TIMER(n, X) (n * 2 + (X ? 1 : 0)) +#define TIMER_ANY 0x00 +#define TIMER1A TIMER(1, 0) +#define TIMER1B TIMER(1, 1) +#define TIMER2A TIMER(2, 0) +#define TIMER2B TIMER(2, 1) +#define TIMER3A TIMER(3, 0) +#define TIMER3B TIMER(3, 1) + +/* + * Flag of Timer/Counter + * These flags specify the way in which timer is configured. + */ +/* Bit size of timer/counter. */ +#define TIMER_FLAG_16BIT 0x0000 +#define TIMER_FLAG_32BIT 0x0001 +/* Switch between timer and counter. */ +#define TIMER_FLAG_TIMER 0x0000 +#define TIMER_FLAG_COUNTER 0x0002 +/* Stop or continue when overflowing/underflowing. */ +#define TIMER_FLAG_ONCE 0x0000 +#define TIMER_FLAG_CYCLIC 0x0004 +/* Count up or counter down. */ +#define TIMER_FLAG_UP 0x0000 +#define TIMER_FLAG_DOWN 0x0008 +/* Count on specific level or edge. */ +#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000 +#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040 +#define TIMER_FLAG_RISE_EDGE 0x0010 +#define TIMER_FLAG_FALL_EDGE 0x0020 +#define TIMER_FLAG_ANY_EDGE 0x0030 +/* Signal is syncronous to module clock or not. */ +#define TIMER_FLAG_UNSYNC 0x0000 +#define TIMER_FLAG_SYNC 0x0080 +/* Different interrupt handle type. */ +#define TIMER_FLAG_NO_HANDLE 0x0000 +#if defined(__KERNEL__) + #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100 +#endif // defined(__KERNEL__) +#define TIMER_FLAG_SIGNAL 0x0300 +/* Internal clock source or external clock source */ +#define TIMER_FLAG_INT_SRC 0x0000 +#define TIMER_FLAG_EXT_SRC 0x1000 + + +/* + * ioctl Command + */ +#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */ +#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */ +#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */ +#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */ +#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */ +#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/ +#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */ +#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */ + +/* + * Data Type Used to Call ioctl + */ +struct gptu_ioctl_param { + unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * + * GPTU_SET_COUNTER, this field is ID of expected * + * timer/counter. If it's zero, a timer/counter would * + * be dynamically allocated and ID would be stored in * + * this field. * + * In command GPTU_GET_COUNT_VALUE, this field is * + * ignored. * + * In other command, this field is ID of timer/counter * + * allocated. */ + unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * + * GPTU_SET_COUNTER, this field contains flags to * + * specify how to configure timer/counter. * + * In command GPTU_START_TIMER, zero indicate start * + * and non-zero indicate resume timer/counter. * + * In other command, this field is ignored. */ + unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains * + * init/reload value. * + * In command GPTU_SET_TIMER, this field contains * + * frequency (0.001Hz) of timer. * + * In command GPTU_GET_COUNT_VALUE, current count * + * value would be stored in this field. * + * In command GPTU_CALCULATE_DIVIDER, this field * + * contains frequency wanted, and after calculation, * + * divider would be stored in this field to overwrite * + * the frequency. * + * In other command, this field is ignored. */ + int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * + * if signal is required, this field contains process * + * ID to which signal would be sent. * + * In other command, this field is ignored. */ + int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * + * if signal is required, this field contains signal * + * number which would be sent. * + * In other command, this field is ignored. */ +}; + +/* + * #################################### + * Data Type + * #################################### + */ +typedef void (*timer_callback)(unsigned long arg); + +extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long); +extern int lq_free_timer(unsigned int); +extern int lq_start_timer(unsigned int, int); +extern int lq_stop_timer(unsigned int); +extern int lq_reset_counter_flags(u32 timer, u32 flags); +extern int lq_get_count_value(unsigned int, unsigned long *); +extern u32 lq_cal_divider(unsigned long); +extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long); +extern int lq_set_counter(unsigned int timer, unsigned int flag, + u32 reload, unsigned long arg1, unsigned long arg2); + +#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/base_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/base_reg.h new file mode 100644 index 000000000..8149f1204 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/base_reg.h @@ -0,0 +1,56 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __BASE_REG_H +#define __BASE_REG_H + +#ifndef KSEG1 +#define KSEG1 0xA0000000 +#endif + +#define LTQ_EBU_SEG1_BASE (KSEG1 + 0x10000000) +#define LTQ_EBU_SEG2_BASE (KSEG1 + 0x11000000) +#define LTQ_EBU_SEG3_BASE (KSEG1 + 0x12000000) +#define LTQ_EBU_SEG4_BASE (KSEG1 + 0x13000000) + +#define LTQ_ASC0_BASE (KSEG1 + 0x14100100) +#define LTQ_ASC1_BASE (KSEG1 + 0x14100200) + +#define LTQ_SSC0_BASE (0x14100300) +#define LTQ_SSC1_BASE (0x14100400) + +#define LTQ_PORT_P0_BASE (KSEG1 + 0x14100600) +#define LTQ_PORT_P1_BASE (KSEG1 + 0x14108100) +#define LTQ_PORT_P2_BASE (KSEG1 + 0x14100800) +#define LTQ_PORT_P3_BASE (KSEG1 + 0x14100900) +#define LTQ_PORT_P4_BASE (KSEG1 + 0x1E000400) + +#define LTQ_EBU_BASE (KSEG1 + 0x14102000) +#define LTQ_DMA_BASE (KSEG1 + 0x14104000) + +#define LTQ_ICU0_IM3_IM2_BASE (KSEG1 + 0x1E016000) +#define LTQ_ICU0_IM5_IM4_IM1_IM0_BASE (KSEG1 + 0x14106000) + +#define LTQ_ES_BASE (KSEG1 + 0x18000000) + +#define LTQ_SYS0_BASE (KSEG1 + 0x1C000000) +#define LTQ_SYS1_BASE (KSEG1 + 0x1C000800) +#define LTQ_SYS2_BASE (KSEG1 + 0x1E400000) + +#define LTQ_L2_SPRAM_BASE (KSEG1 + 0x1F1E8000) + +#define LTQ_SWINT_BASE (KSEG1 + 0x1E000100) +#define LTQ_MBS_BASE (KSEG1 + 0x1E000200) + +#define LTQ_STATUS_BASE (KSEG1 + 0x1E000500) + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h new file mode 100644 index 000000000..9c33516e8 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h @@ -0,0 +1,37 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + +******************************************************************************/ + +#ifndef __BOOT_REG_H +#define __BOOT_REG_H + +#define LTQ_BOOT_CPU_OFFSET 0x20 + +#define LTQ_BOOT_RVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x00) +#define LTQ_BOOT_NVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x04) +#define LTQ_BOOT_EVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x08) +#define LTQ_BOOT_CP0_STATUS(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x0C) +#define LTQ_BOOT_CP0_EPC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x10) +#define LTQ_BOOT_CP0_EEPC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x14) +#define LTQ_BOOT_SIZE(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x18) /* only for CP1 */ +#define LTQ_BOOT_RCU_SR(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x18) /* only for CP0 */ +#define LTQ_BOOT_CFG_STAT(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x1C) + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h new file mode 100644 index 000000000..9fde2f6dd --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h @@ -0,0 +1,308 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __DMA_REG_H +#define __DMA_REG_H + +#define dma_r32(reg) ltq_r32(&dma->reg) +#define dma_w32(val, reg) ltq_w32(val, &dma->reg) +#define dma_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &dma->reg) + +/** DMA register structure */ +struct svip_reg_dma { + volatile unsigned long clc; /* 0x00 */ + volatile unsigned long reserved0; /* 0x04 */ + volatile unsigned long id; /* 0x08 */ + volatile unsigned long reserved1; /* 0x0c */ + volatile unsigned long ctrl; /* 0x10 */ + volatile unsigned long cpoll; /* 0x14 */ + volatile unsigned long cs; /* 0x18 */ + volatile unsigned long cctrl; /* 0x1C */ + volatile unsigned long cdba; /* 0x20 */ + volatile unsigned long cdlen; /* 0x24 */ + volatile unsigned long cis; /* 0x28 */ + volatile unsigned long cie; /* 0x2C */ + volatile unsigned long cgbl; /* 0x30 */ + volatile unsigned long reserved2[3]; /* 0x34 */ + volatile unsigned long ps; /* 0x40 */ + volatile unsigned long pctrl; /* 0x44 */ + volatile unsigned long reserved3[43]; /* 0x48 */ + volatile unsigned long irnen; /* 0xF4 */ + volatile unsigned long irncr; /* 0xF8 */ + volatile unsigned long irnicr; /* 0xFC */ +}; + +/******************************************************************************* + * CLC Register + ******************************************************************************/ + +/* Fast Shut-Off Enable Bit (5) */ +#define DMA_CLC_FSOE (0x1 << 5) +#define DMA_CLC_FSOE_VAL(val) (((val) & 0x1) << 5) +#define DMA_CLC_FSOE_GET(val) ((((val) & DMA_CLC_FSOE) >> 5) & 0x1) +#define DMA_CLC_FSOE_SET(reg,val) (reg) = ((reg & ~DMA_CLC_FSOE) | (((val) & 0x1) << 5)) +/* Suspend Bit Write Enable for OCDS (4) */ +#define DMA_CLC_SBWE (0x1 << 4) +#define DMA_CLC_SBWE_VAL(val) (((val) & 0x1) << 4) +#define DMA_CLC_SBWE_SET(reg,val) (reg) = (((reg & ~DMA_CLC_SBWE) | (val) & 1) << 4) +/* External Request Disable (3) */ +#define DMA_CLC_EDIS (0x1 << 3) +#define DMA_CLC_EDIS_VAL(val) (((val) & 0x1) << 3) +#define DMA_CLC_EDIS_GET(val) ((((val) & DMA_CLC_EDIS) >> 3) & 0x1) +#define DMA_CLC_EDIS_SET(reg,val) (reg) = ((reg & ~DMA_CLC_EDIS) | (((val) & 0x1) << 3)) +/* Suspend Enable Bit for OCDS (2) */ +#define DMA_CLC_SPEN (0x1 << 2) +#define DMA_CLC_SPEN_VAL(val) (((val) & 0x1) << 2) +#define DMA_CLC_SPEN_GET(val) ((((val) & DMA_CLC_SPEN) >> 2) & 0x1) +#define DMA_CLC_SPEN_SET(reg,val) (reg) = ((reg & ~DMA_CLC_SPEN) | (((val) & 0x1) << 2)) +/* Disable Status Bit (1) */ +#define DMA_CLC_DISS (0x1 << 1) +#define DMA_CLC_DISS_GET(val) ((((val) & DMA_CLC_DISS) >> 1) & 0x1) +/* Disable Request Bit (0) */ +#define DMA_CLC_DISR (0x1) +#define DMA_CLC_DISR_VAL(val) (((val) & 0x1) << 0) +#define DMA_CLC_DISR_GET(val) ((((val) & DMA_CLC_DISR) >> 0) & 0x1) +#define DMA_CLC_DISR_SET(reg,val) (reg) = ((reg & ~DMA_CLC_DISR) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * ID Register + ******************************************************************************/ + +/* Number of Channels (25:20) */ +#define DMA_ID_CHNR (0x3f << 20) +#define DMA_ID_CHNR_GET(val) ((((val) & DMA_ID_CHNR) >> 20) & 0x3f) +/* Number of Ports (19:16) */ +#define DMA_ID_PRTNR (0xf << 16) +#define DMA_ID_PRTNR_GET(val) ((((val) & DMA_ID_PRTNR) >> 16) & 0xf) +/* Module ID (15:8) */ +#define DMA_ID_ID (0xff << 8) +#define DMA_ID_ID_GET(val) ((((val) & DMA_ID_ID) >> 8) & 0xff) +/* Revision (4:0) */ +#define DMA_ID_REV (0x1f) +#define DMA_ID_REV_GET(val) ((((val) & DMA_ID_REV) >> 0) & 0x1f) + +/******************************************************************************* + * Control Register + ******************************************************************************/ + +/* Global Software Reset (0) */ +#define DMA_CTRL_RST (0x1) +#define DMA_CTRL_RST_GET(val) ((((val) & DMA_CTRL_RST) >> 0) & 0x1) + +/******************************************************************************* + * Channel Polling Register + ******************************************************************************/ + +/* Enable (31) */ +#define DMA_CPOLL_EN (0x1 << 31) +#define DMA_CPOLL_EN_VAL(val) (((val) & 0x1) << 31) +#define DMA_CPOLL_EN_GET(val) ((((val) & DMA_CPOLL_EN) >> 31) & 0x1) +#define DMA_CPOLL_EN_SET(reg,val) (reg) = ((reg & ~DMA_CPOLL_EN) | (((val) & 0x1) << 31)) +/* Counter (15:4) */ +#define DMA_CPOLL_CNT (0xfff << 4) +#define DMA_CPOLL_CNT_VAL(val) (((val) & 0xfff) << 4) +#define DMA_CPOLL_CNT_GET(val) ((((val) & DMA_CPOLL_CNT) >> 4) & 0xfff) +#define DMA_CPOLL_CNT_SET(reg,val) (reg) = ((reg & ~DMA_CPOLL_CNT) | (((val) & 0xfff) << 4)) + +/******************************************************************************* + * Global Buffer Length Register + ******************************************************************************/ + +/* Global Buffer Length (15:0) */ +#define DMA_CGBL_GBL (0xffff) +#define DMA_CGBL_GBL_VAL(val) (((val) & 0xffff) << 0) +#define DMA_CGBL_GBL_GET(val) ((((val) & DMA_CGBL_GBL) >> 0) & 0xffff) +#define DMA_CGBL_GBL_SET(reg,val) (reg) = ((reg & ~DMA_CGBL_GBL) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * Channel Select Register + ******************************************************************************/ + +/* Channel Selection (4:0) */ +#define DMA_CS_CS (0x1f) +#define DMA_CS_CS_VAL(val) (((val) & 0x1f) << 0) +#define DMA_CS_CS_GET(val) ((((val) & DMA_CS_CS) >> 0) & 0x1f) +#define DMA_CS_CS_SET(reg,val) (reg) = ((reg & ~DMA_CS_CS) | (((val) & 0x1f) << 0)) + +/******************************************************************************* + * Channel Control Register + ******************************************************************************/ + +/* Peripheral to Peripheral Copy (24) */ +#define DMA_CCTRL_P2PCPY (0x1 << 24) +#define DMA_CCTRL_P2PCPY_VAL(val) (((val) & 0x1) << 24) +#define DMA_CCTRL_P2PCPY_GET(val) ((((val) & DMA_CCTRL_P2PCPY) >> 24) & 0x1) +#define DMA_CCTRL_P2PCPY_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_P2PCPY) | (((val) & 0x1) << 24)) +/* Channel Weight for Transmit Direction (17:16) */ +#define DMA_CCTRL_TXWGT (0x3 << 16) +#define DMA_CCTRL_TXWGT_VAL(val) (((val) & 0x3) << 16) +#define DMA_CCTRL_TXWGT_GET(val) ((((val) & DMA_CCTRL_TXWGT) >> 16) & 0x3) +#define DMA_CCTRL_TXWGT_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_TXWGT) | (((val) & 0x3) << 16)) +/* Port Assignment (13:11) */ +#define DMA_CCTRL_PRTNR (0x7 << 11) +#define DMA_CCTRL_PRTNR_GET(val) ((((val) & DMA_CCTRL_PRTNR) >> 11) & 0x7) +/* Class (10:9) */ +#define DMA_CCTRL_CLASS (0x3 << 9) +#define DMA_CCTRL_CLASS_VAL(val) (((val) & 0x3) << 9) +#define DMA_CCTRL_CLASS_GET(val) ((((val) & DMA_CCTRL_CLASS) >> 9) & 0x3) +#define DMA_CCTRL_CLASS_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_CLASS) | (((val) & 0x3) << 9)) +/* Direction (8) */ +#define DMA_CCTRL_DIR (0x1 << 8) +#define DMA_CCTRL_DIR_GET(val) ((((val) & DMA_CCTRL_DIR) >> 8) & 0x1) +/* Reset (1) */ +#define DMA_CCTRL_RST (0x1 << 1) +#define DMA_CCTRL_RST_VAL(val) (((val) & 0x1) << 1) +#define DMA_CCTRL_RST_GET(val) ((((val) & DMA_CCTRL_RST) >> 1) & 0x1) +#define DMA_CCTRL_RST_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_RST) | (((val) & 0x1) << 1)) +/* Channel On or Off (0) */ +#define DMA_CCTRL_ON_OFF (0x1) +#define DMA_CCTRL_ON_OFF_VAL(val) (((val) & 0x1) << 0) +#define DMA_CCTRL_ON_OFF_GET(val) ((((val) & DMA_CCTRL_ON_OFF) >> 0) & 0x1) +#define DMA_CCTRL_ON_OFF_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_ON_OFF) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Channel Descriptor Base Address Register + ******************************************************************************/ + +/* Channel Descriptor Base Address (29:3) */ +#define DMA_CDBA_CDBA (0x7ffffff << 3) +#define DMA_CDBA_CDBA_VAL(val) (((val) & 0x7ffffff) << 3) +#define DMA_CDBA_CDBA_GET(val) ((((val) & DMA_CDBA_CDBA) >> 3) & 0x7ffffff) +#define DMA_CDBA_CDBA_SET(reg,val) (reg) = ((reg & ~DMA_CDBA_CDBA) | (((val) & 0x7ffffff) << 3)) + +/******************************************************************************* + * Channel Descriptor Length Register + ******************************************************************************/ + +/* Channel Descriptor Length (7:0) */ +#define DMA_CDLEN_CDLEN (0xff) +#define DMA_CDLEN_CDLEN_VAL(val) (((val) & 0xff) << 0) +#define DMA_CDLEN_CDLEN_GET(val) ((((val) & DMA_CDLEN_CDLEN) >> 0) & 0xff) +#define DMA_CDLEN_CDLEN_SET(reg,val) (reg) = ((reg & ~DMA_CDLEN_CDLEN) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * Channel Interrupt Status Register + ******************************************************************************/ + +/* SAI Read Error Interrupt (5) */ +#define DMA_CIS_RDERR (0x1 << 5) +#define DMA_CIS_RDERR_GET(val) ((((val) & DMA_CIS_RDERR) >> 5) & 0x1) +/* Channel Off Interrupt (4) */ +#define DMA_CIS_CHOFF (0x1 << 4) +#define DMA_CIS_CHOFF_GET(val) ((((val) & DMA_CIS_CHOFF) >> 4) & 0x1) +/* Descriptor Complete Interrupt (3) */ +#define DMA_CIS_DESCPT (0x1 << 3) +#define DMA_CIS_DESCPT_GET(val) ((((val) & DMA_CIS_DESCPT) >> 3) & 0x1) +/* Descriptor Under-Run Interrupt (2) */ +#define DMA_CIS_DUR (0x1 << 2) +#define DMA_CIS_DUR_GET(val) ((((val) & DMA_CIS_DUR) >> 2) & 0x1) +/* End of Packet Interrupt (1) */ +#define DMA_CIS_EOP (0x1 << 1) +#define DMA_CIS_EOP_GET(val) ((((val) & DMA_CIS_EOP) >> 1) & 0x1) + +/******************************************************************************* + * Channel Interrupt Enable Register + ******************************************************************************/ + +/* SAI Read Error Interrupt (5) */ +#define DMA_CIE_RDERR (0x1 << 5) +#define DMA_CIE_RDERR_GET(val) ((((val) & DMA_CIE_RDERR) >> 5) & 0x1) +/* Channel Off Interrupt (4) */ +#define DMA_CIE_CHOFF (0x1 << 4) +#define DMA_CIE_CHOFF_GET(val) ((((val) & DMA_CIE_CHOFF) >> 4) & 0x1) +/* Descriptor Complete Interrupt Enable (3) */ +#define DMA_CIE_DESCPT (0x1 << 3) +#define DMA_CIE_DESCPT_GET(val) ((((val) & DMA_CIE_DESCPT) >> 3) & 0x1) +/* Descriptor Under Run Interrupt Enable (2) */ +#define DMA_CIE_DUR (0x1 << 2) +#define DMA_CIE_DUR_GET(val) ((((val) & DMA_CIE_DUR) >> 2) & 0x1) +/* End of Packet Interrupt Enable (1) */ +#define DMA_CIE_EOP (0x1 << 1) +#define DMA_CIE_EOP_GET(val) ((((val) & DMA_CIE_EOP) >> 1) & 0x1) + +/******************************************************************************* + * Port Select Register + ******************************************************************************/ + +/* Port Selection (2:0) */ +#define DMA_PS_PS (0x7) +#define DMA_PS_PS_VAL(val) (((val) & 0x7) << 0) +#define DMA_PS_PS_GET(val) ((((val) & DMA_PS_PS) >> 0) & 0x7) +#define DMA_PS_PS_SET(reg,val) (reg) = ((reg & ~DMA_PS_PS) | (((val) & 0x7) << 0)) + +/******************************************************************************* + * Port Control Register + ******************************************************************************/ + +/* General Purpose Control (16) */ +#define DMA_PCTRL_GPC (0x1 << 16) +#define DMA_PCTRL_GPC_VAL(val) (((val) & 0x1) << 16) +#define DMA_PCTRL_GPC_GET(val) ((((val) & DMA_PCTRL_GPC) >> 16) & 0x1) +#define DMA_PCTRL_GPC_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_GPC) | (((val) & 0x1) << 16)) +/* Port Weight for Transmit Direction (14:12) */ +#define DMA_PCTRL_TXWGT (0x7 << 12) +#define DMA_PCTRL_TXWGT_VAL(val) (((val) & 0x7) << 12) +#define DMA_PCTRL_TXWGT_GET(val) ((((val) & DMA_PCTRL_TXWGT) >> 12) & 0x7) +#define DMA_PCTRL_TXWGT_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_TXWGT) | (((val) & 0x7) << 12)) +/* Endianness for Transmit Direction (11:10) */ +#define DMA_PCTRL_TXENDI (0x3 << 10) +#define DMA_PCTRL_TXENDI_VAL(val) (((val) & 0x3) << 10) +#define DMA_PCTRL_TXENDI_GET(val) ((((val) & DMA_PCTRL_TXENDI) >> 10) & 0x3) +#define DMA_PCTRL_TXENDI_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_TXENDI) | (((val) & 0x3) << 10)) +/* Endianness for Receive Direction (9:8) */ +#define DMA_PCTRL_RXENDI (0x3 << 8) +#define DMA_PCTRL_RXENDI_VAL(val) (((val) & 0x3) << 8) +#define DMA_PCTRL_RXENDI_GET(val) ((((val) & DMA_PCTRL_RXENDI) >> 8) & 0x3) +#define DMA_PCTRL_RXENDI_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_RXENDI) | (((val) & 0x3) << 8)) +/* Packet Drop Enable (6) */ +#define DMA_PCTRL_PDEN (0x1 << 6) +#define DMA_PCTRL_PDEN_VAL(val) (((val) & 0x1) << 6) +#define DMA_PCTRL_PDEN_GET(val) ((((val) & DMA_PCTRL_PDEN) >> 6) & 0x1) +#define DMA_PCTRL_PDEN_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_PDEN) | (((val) & 0x1) << 6)) +/* Burst Length for Transmit Direction (5:4) */ +#define DMA_PCTRL_TXBL (0x3 << 4) +#define DMA_PCTRL_TXBL_VAL(val) (((val) & 0x3) << 4) +#define DMA_PCTRL_TXBL_GET(val) ((((val) & DMA_PCTRL_TXBL) >> 4) & 0x3) +#define DMA_PCTRL_TXBL_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_TXBL) | (((val) & 0x3) << 4)) +/* Burst Length for Receive Direction (3:2) */ +#define DMA_PCTRL_RXBL (0x3 << 2) +#define DMA_PCTRL_RXBL_VAL(val) (((val) & 0x3) << 2) +#define DMA_PCTRL_RXBL_GET(val) ((((val) & DMA_PCTRL_RXBL) >> 2) & 0x3) +#define DMA_PCTRL_RXBL_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_RXBL) | (((val) & 0x3) << 2)) + +/******************************************************************************* + * DMA_IRNEN Register + ******************************************************************************/ + +/* Channel x Interrupt Request Enable (23) */ +#define DMA_IRNEN_CH23 (0x1 << 23) +#define DMA_IRNEN_CH23_VAL(val) (((val) & 0x1) << 23) +#define DMA_IRNEN_CH23_GET(val) ((((val) & DMA_IRNEN_CH23) >> 23) & 0x1) +#define DMA_IRNEN_CH23_SET(reg,val) (reg) = ((reg & ~DMA_IRNEN_CH23) | (((val) & 0x1) << 23)) + +/******************************************************************************* + * DMA_IRNCR Register + ******************************************************************************/ + +/* Channel x Interrupt (23) */ +#define DMA_IRNCR_CH23 (0x1 << 23) +#define DMA_IRNCR_CH23_GET(val) ((((val) & DMA_IRNCR_CH23) >> 23) & 0x1) + +/******************************************************************************* + * DMA_IRNICR Register + ******************************************************************************/ + +/* Channel x Interrupt Request (23) */ +#define DMA_IRNICR_CH23 (0x1 << 23) +#define DMA_IRNICR_CH23_GET(val) ((((val) & DMA_IRNICR_CH23) >> 23) & 0x1) + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h new file mode 100644 index 000000000..4e00d01ba --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h @@ -0,0 +1,615 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __EBU_REG_H +#define __EBU_REG_H + +#define ebu_r32(reg) ltq_r32(&ebu->reg) +#define ebu_w32(val, reg) ltq_w32(val, &ebu->reg) +#define ebu_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &ebu->reg) + +/** EBU register structure */ +struct svip_reg_ebu { + volatile unsigned long clc; /* 0x0000 */ + volatile unsigned long reserved0; /* 0x04 */ + volatile unsigned long id; /* 0x0008 */ + volatile unsigned long reserved1; /* 0x0c */ + volatile unsigned long con; /* 0x0010 */ + volatile unsigned long reserved2[3]; /* 0x14 */ + volatile unsigned long addr_sel_0; /* 0x0020 */ + volatile unsigned long addr_sel_1; /* 0x0024 */ + volatile unsigned long addr_sel_2; /* 0x0028 */ + volatile unsigned long addr_sel_3; /* 0x002c */ + volatile unsigned long reserved3[12]; /* 0x30 */ + volatile unsigned long con_0; /* 0x0060 */ + volatile unsigned long con_1; /* 0x0064 */ + volatile unsigned long con_2; /* 0x0068 */ + volatile unsigned long con_3; /* 0x006c */ + volatile unsigned long reserved4[4]; /* 0x70 */ + volatile unsigned long emu_addr; /* 0x0080 */ + volatile unsigned long emu_bc; /* 0x0084 */ + volatile unsigned long emu_con; /* 0x0088 */ + volatile unsigned long reserved5; /* 0x8c */ + volatile unsigned long pcc_con; /* 0x0090 */ + volatile unsigned long pcc_stat; /* 0x0094 */ + volatile unsigned long reserved6[2]; /* 0x98 */ + volatile unsigned long pcc_istat; /* 0x00A0 */ + volatile unsigned long pcc_ien; /* 0x00A4 */ + volatile unsigned long pcc_int_out; /* 0x00A8 */ + volatile unsigned long pcc_irs; /* 0x00AC */ + volatile unsigned long nand_con; /* 0x00B0 */ + volatile unsigned long nand_wait; /* 0x00B4 */ + volatile unsigned long nand_ecc0; /* 0x00B8 */ + volatile unsigned long nand_ecc_ac; /* 0x00BC */ +}; + +/******************************************************************************* + * EBU + ******************************************************************************/ +#define LTQ_EBU_CLC ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0000)) +#define LTQ_EBU_ID ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0008)) +#define LTQ_EBU_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0010)) +#define LTQ_EBU_ADDR_SEL_0 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0020)) +#define LTQ_EBU_ADDR_SEL_1 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0024)) +#define LTQ_EBU_ADDR_SEL_2 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0028)) +#define LTQ_EBU_ADDR_SEL_3 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x002c)) +#define LTQ_EBU_CON_0 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0060)) +#define LTQ_EBU_CON_1 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0064)) +#define LTQ_EBU_CON_2 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0068)) +#define LTQ_EBU_CON_3 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x006c)) +#define LTQ_EBU_EMU_BC ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0084)) +#define LTQ_EBU_PCC_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0090)) +#define LTQ_EBU_PCC_STAT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0094)) +#define LTQ_EBU_PCC_ISTAT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00A0)) +#define LTQ_EBU_PCC_IEN ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00A4)) +#define LTQ_EBU_PCC_INT_OUT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00A8)) +#define LTQ_EBU_PCC_IRS ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00AC)) +#define LTQ_EBU_NAND_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00B0)) +#define LTQ_EBU_NAND_WAIT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00B4)) +#define LTQ_EBU_NAND_ECC0 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00B8)) +#define LTQ_EBU_NAND_ECC_AC ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00BC)) +#define LTQ_EBU_EMU_ADDR ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0080)) +#define LTQ_EBU_EMU_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0088)) + +/******************************************************************************* + * EBU Clock Control Register + ******************************************************************************/ + +/* EBU Disable Status Bit (1) */ +#define LTQ_EBU_CLC_DISS (0x1 << 1) +#define LTQ_EBU_CLC_DISS_GET(val) ((((val) & LTQ_EBU_CLC_DISS) >> 1) & 0x1) +/* Used for Enable/disable Control of the EBU (0) */ +#define LTQ_EBU_CLC_DISR (0x1) +#define LTQ_EBU_CLC_DISR_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_CLC_DISR_GET(val) ((((val) & LTQ_EBU_CLC_DISR) >> 0) & 0x1) +#define LTQ_EBU_CLC_DISR_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CLC_DISR) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * EBU Identification Register (Internal) + ******************************************************************************/ + +/* Module Number (31:8) */ +#define LTQ_EBU_ID_MODNUM (0xffffff << 8) +#define LTQ_EBU_ID_MODNUM_GET(val) ((((val) & LTQ_EBU_ID_MODNUM) >> 8) & 0xffffff) +/* Revision Number (7:0) */ +#define LTQ_EBU_ID_REVNUM (0xff) +#define LTQ_EBU_ID_REVNUM_GET(val) ((((val) & LTQ_EBU_ID_REVNUM) >> 0) & 0xff) + +/******************************************************************************* + * External Bus Unit Control Register + ******************************************************************************/ + +/* Driver Turn-Around Control, Chip Select Triggered (22:20) */ +#define LTQ_EBU_CON_DTACS (0x7 << 20) +#define LTQ_EBU_CON_DTACS_VAL(val) (((val) & 0x7) << 20) +#define LTQ_EBU_CON_DTACS_GET(val) ((((val) & LTQ_EBU_CON_DTACS) >> 20) & 0x7) +#define LTQ_EBU_CON_DTACS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_DTACS) | (((val) & 0x7) << 20)) +/* Driver Turn-Around Control, Read-write Triggered (18:16) */ +#define LTQ_EBU_CON_DTARW (0x7 << 16) +#define LTQ_EBU_CON_DTARW_VAL(val) (((val) & 0x7) << 16) +#define LTQ_EBU_CON_DTARW_GET(val) ((((val) & LTQ_EBU_CON_DTARW) >> 16) & 0x7) +#define LTQ_EBU_CON_DTARW_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_DTARW) | (((val) & 0x7) << 16)) +/* Time-Out Control (15:8) */ +#define LTQ_EBU_CON_TOUTC (0xff << 8) +#define LTQ_EBU_CON_TOUTC_VAL(val) (((val) & 0xff) << 8) +#define LTQ_EBU_CON_TOUTC_GET(val) ((((val) & LTQ_EBU_CON_TOUTC) >> 8) & 0xff) +#define LTQ_EBU_CON_TOUTC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_TOUTC) | (((val) & 0xff) << 8)) +/* Arbitration Mode (7:6) */ +#define LTQ_EBU_CON_ARBMODE (0x3 << 6) +#define LTQ_EBU_CON_ARBMODE_VAL(val) (((val) & 0x3) << 6) +#define LTQ_EBU_CON_ARBMODE_GET(val) ((((val) & LTQ_EBU_CON_ARBMODE) >> 6) & 0x3) +#define LTQ_EBU_CON_ARBMODE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_ARBMODE) | (((val) & 0x3) << 6)) +/* Arbitration Synchronization (5) */ +#define LTQ_EBU_CON_ARBSYNC (0x1 << 5) +#define LTQ_EBU_CON_ARBSYNC_VAL(val) (((val) & 0x1) << 5) +#define LTQ_EBU_CON_ARBSYNC_GET(val) ((((val) & LTQ_EBU_CON_ARBSYNC) >> 5) & 0x1) +#define LTQ_EBU_CON_ARBSYNC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_ARBSYNC) | (((val) & 0x1) << 5)) + +/******************************************************************************* + * Address Select Registers + ******************************************************************************/ + +/* Memory Region Base Address (31:12) */ +#define LTQ_EBU_ADDR_SEL_0_BASE (0xfffff << 12) +#define LTQ_EBU_ADDR_SEL_0_BASE_VAL(val) (((val) & 0xfffff) << 12) +#define LTQ_EBU_ADDR_SEL_0_BASE_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_BASE) >> 12) & 0xfffff) +#define LTQ_EBU_ADDR_SEL_0_BASE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_BASE) | (((val) & 0xfffff) << 12)) +/* Memory Region Address Mask (7:4) */ +#define LTQ_EBU_ADDR_SEL_0_MASK (0xf << 4) +#define LTQ_EBU_ADDR_SEL_0_MASK_VAL(val) (((val) & 0xf) << 4) +#define LTQ_EBU_ADDR_SEL_0_MASK_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_MASK) >> 4) & 0xf) +#define LTQ_EBU_ADDR_SEL_0_MASK_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_MASK) | (((val) & 0xf) << 4)) +/* Memory Region Mirror Enable Control (1) */ +#define LTQ_EBU_ADDR_SEL_0_MRME (0x1 << 1) +#define LTQ_EBU_ADDR_SEL_0_MRME_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_ADDR_SEL_0_MRME_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_MRME) >> 1) & 0x1) +#define LTQ_EBU_ADDR_SEL_0_MRME_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_MRME) | (((val) & 0x1) << 1)) +/* Memory Region Enable Control (0) */ +#define LTQ_EBU_ADDR_SEL_0_REGEN (0x1) +#define LTQ_EBU_ADDR_SEL_0_REGEN_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_ADDR_SEL_0_REGEN_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_REGEN) >> 0) & 0x1) +#define LTQ_EBU_ADDR_SEL_0_REGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_REGEN) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Bus Configuration Registers + ******************************************************************************/ + +/* Memory Region Write Protection (31) */ +#define LTQ_EBU_CON_0_WRDIS (0x1 << 31) +#define LTQ_EBU_CON_0_WRDIS_VAL(val) (((val) & 0x1) << 31) +#define LTQ_EBU_CON_0_WRDIS_GET(val) ((((val) & LTQ_EBU_CON_0_WRDIS) >> 31) & 0x1) +#define LTQ_EBU_CON_0_WRDIS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WRDIS) | (((val) & 0x1) << 31)) +/* Address Swapping (30) */ +#define LTQ_EBU_CON_0_ADSWP (0x1 << 30) +#define LTQ_EBU_CON_0_ADSWP_VAL(val) (((val) & 0x1) << 30) +#define LTQ_EBU_CON_0_ADSWP_GET(val) ((((val) & LTQ_EBU_CON_0_ADSWP) >> 30) & 0x1) +#define LTQ_EBU_CON_0_ADSWP_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_ADSWP) | (((val) & 0x1) << 30)) +/* Address Generation Control (26:24) */ +#define LTQ_EBU_CON_0_AGEN (0x7 << 24) +#define LTQ_EBU_CON_0_AGEN_VAL(val) (((val) & 0x7) << 24) +#define LTQ_EBU_CON_0_AGEN_GET(val) ((((val) & LTQ_EBU_CON_0_AGEN) >> 24) & 0x7) +#define LTQ_EBU_CON_0_AGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_AGEN) | (((val) & 0x7) << 24)) +/* Extended Address Setup Control (22) */ +#define LTQ_EBU_CON_0_SETUP (0x1 << 22) +#define LTQ_EBU_CON_0_SETUP_VAL(val) (((val) & 0x1) << 22) +#define LTQ_EBU_CON_0_SETUP_GET(val) ((((val) & LTQ_EBU_CON_0_SETUP) >> 22) & 0x1) +#define LTQ_EBU_CON_0_SETUP_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_SETUP) | (((val) & 0x1) << 22)) +/* Variable Wait-State Insertion Control (21:20) */ +#define LTQ_EBU_CON_0_WAIT (0x3 << 20) +#define LTQ_EBU_CON_0_WAIT_VAL(val) (((val) & 0x3) << 20) +#define LTQ_EBU_CON_0_WAIT_GET(val) ((((val) & LTQ_EBU_CON_0_WAIT) >> 20) & 0x3) +#define LTQ_EBU_CON_0_WAIT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WAIT) | (((val) & 0x3) << 20)) +/* Active WAIT Level Control (19) */ +#define LTQ_EBU_CON_0_WINV (0x1 << 19) +#define LTQ_EBU_CON_0_WINV_VAL(val) (((val) & 0x1) << 19) +#define LTQ_EBU_CON_0_WINV_GET(val) ((((val) & LTQ_EBU_CON_0_WINV) >> 19) & 0x1) +#define LTQ_EBU_CON_0_WINV_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WINV) | (((val) & 0x1) << 19)) +/* External Device Data Width Control (17:16) */ +#define LTQ_EBU_CON_0_PW (0x3 << 16) +#define LTQ_EBU_CON_0_PW_VAL(val) (((val) & 0x3) << 16) +#define LTQ_EBU_CON_0_PW_GET(val) ((((val) & LTQ_EBU_CON_0_PW) >> 16) & 0x3) +#define LTQ_EBU_CON_0_PW_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_PW) | (((val) & 0x3) << 16)) +/* Address Latch Enable ALE Duration Control (15:14) */ +#define LTQ_EBU_CON_0_ALEC (0x3 << 14) +#define LTQ_EBU_CON_0_ALEC_VAL(val) (((val) & 0x3) << 14) +#define LTQ_EBU_CON_0_ALEC_GET(val) ((((val) & LTQ_EBU_CON_0_ALEC) >> 14) & 0x3) +#define LTQ_EBU_CON_0_ALEC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_ALEC) | (((val) & 0x3) << 14)) +/* Byte Control Signal Timing Mode Control (13:12) */ +#define LTQ_EBU_CON_0_BCGEN (0x3 << 12) +#define LTQ_EBU_CON_0_BCGEN_VAL(val) (((val) & 0x3) << 12) +#define LTQ_EBU_CON_0_BCGEN_GET(val) ((((val) & LTQ_EBU_CON_0_BCGEN) >> 12) & 0x3) +#define LTQ_EBU_CON_0_BCGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_BCGEN) | (((val) & 0x3) << 12)) +/* Write Access Wait-State Control (10:8) */ +#define LTQ_EBU_CON_0_WAITWRC (0x7 << 8) +#define LTQ_EBU_CON_0_WAITWRC_VAL(val) (((val) & 0x7) << 8) +#define LTQ_EBU_CON_0_WAITWRC_GET(val) ((((val) & LTQ_EBU_CON_0_WAITWRC) >> 8) & 0x7) +#define LTQ_EBU_CON_0_WAITWRC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WAITWRC) | (((val) & 0x7) << 8)) +/* Read Access Wait-State Control (7:6) */ +#define LTQ_EBU_CON_0_WAITRDC (0x3 << 6) +#define LTQ_EBU_CON_0_WAITRDC_VAL(val) (((val) & 0x3) << 6) +#define LTQ_EBU_CON_0_WAITRDC_GET(val) ((((val) & LTQ_EBU_CON_0_WAITRDC) >> 6) & 0x3) +#define LTQ_EBU_CON_0_WAITRDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WAITRDC) | (((val) & 0x3) << 6)) +/* Hold/Pause Cycle Control (5:4) */ +#define LTQ_EBU_CON_0_HOLDC (0x3 << 4) +#define LTQ_EBU_CON_0_HOLDC_VAL(val) (((val) & 0x3) << 4) +#define LTQ_EBU_CON_0_HOLDC_GET(val) ((((val) & LTQ_EBU_CON_0_HOLDC) >> 4) & 0x3) +#define LTQ_EBU_CON_0_HOLDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_HOLDC) | (((val) & 0x3) << 4)) +/* Recovery Cycle Control (3:2) */ +#define LTQ_EBU_CON_0_RECOVC (0x3 << 2) +#define LTQ_EBU_CON_0_RECOVC_VAL(val) (((val) & 0x3) << 2) +#define LTQ_EBU_CON_0_RECOVC_GET(val) ((((val) & LTQ_EBU_CON_0_RECOVC) >> 2) & 0x3) +#define LTQ_EBU_CON_0_RECOVC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_RECOVC) | (((val) & 0x3) << 2)) +/* Wait Cycle Multiplier Control (1:0) */ +#define LTQ_EBU_CON_0_CMULT (0x3) +#define LTQ_EBU_CON_0_CMULT_VAL(val) (((val) & 0x3) << 0) +#define LTQ_EBU_CON_0_CMULT_GET(val) ((((val) & LTQ_EBU_CON_0_CMULT) >> 0) & 0x3) +#define LTQ_EBU_CON_0_CMULT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_CMULT) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * External Bus Unit Emulator Bus Configuration Register + ******************************************************************************/ + +/* Write Protection (31) */ +#define LTQ_EBU_EMU_BC_WRITE (0x1 << 31) +#define LTQ_EBU_EMU_BC_WRITE_VAL(val) (((val) & 0x1) << 31) +#define LTQ_EBU_EMU_BC_WRITE_GET(val) ((((val) & LTQ_EBU_EMU_BC_WRITE) >> 31) & 0x1) +#define LTQ_EBU_EMU_BC_WRITE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WRITE) | (((val) & 0x1) << 31)) +/* Address Generation Control (26:24) */ +#define LTQ_EBU_EMU_BC_AGEN (0x7 << 24) +#define LTQ_EBU_EMU_BC_AGEN_VAL(val) (((val) & 0x7) << 24) +#define LTQ_EBU_EMU_BC_AGEN_GET(val) ((((val) & LTQ_EBU_EMU_BC_AGEN) >> 24) & 0x7) +#define LTQ_EBU_EMU_BC_AGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_AGEN) | (((val) & 0x7) << 24)) +/* Extended Address Setup Control (22) */ +#define LTQ_EBU_EMU_BC_SETUP (0x1 << 22) +#define LTQ_EBU_EMU_BC_SETUP_VAL(val) (((val) & 0x1) << 22) +#define LTQ_EBU_EMU_BC_SETUP_GET(val) ((((val) & LTQ_EBU_EMU_BC_SETUP) >> 22) & 0x1) +#define LTQ_EBU_EMU_BC_SETUP_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_SETUP) | (((val) & 0x1) << 22)) +/* Variable Waitstate Insertion Control (21:20) */ +#define LTQ_EBU_EMU_BC_WAIT (0x3 << 20) +#define LTQ_EBU_EMU_BC_WAIT_VAL(val) (((val) & 0x3) << 20) +#define LTQ_EBU_EMU_BC_WAIT_GET(val) ((((val) & LTQ_EBU_EMU_BC_WAIT) >> 20) & 0x3) +#define LTQ_EBU_EMU_BC_WAIT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WAIT) | (((val) & 0x3) << 20)) +/* Active WAIT Level Control (19) */ +#define LTQ_EBU_EMU_BC_WINV (0x1 << 19) +#define LTQ_EBU_EMU_BC_WINV_VAL(val) (((val) & 0x1) << 19) +#define LTQ_EBU_EMU_BC_WINV_GET(val) ((((val) & LTQ_EBU_EMU_BC_WINV) >> 19) & 0x1) +#define LTQ_EBU_EMU_BC_WINV_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WINV) | (((val) & 0x1) << 19)) +/* External Device Data Width Control (17:16) */ +#define LTQ_EBU_EMU_BC_PORTW (0x3 << 16) +#define LTQ_EBU_EMU_BC_PORTW_VAL(val) (((val) & 0x3) << 16) +#define LTQ_EBU_EMU_BC_PORTW_GET(val) ((((val) & LTQ_EBU_EMU_BC_PORTW) >> 16) & 0x3) +#define LTQ_EBU_EMU_BC_PORTW_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_PORTW) | (((val) & 0x3) << 16)) +/* Address Latch Enable Function (15:14) */ +#define LTQ_EBU_EMU_BC_ALEC (0x3 << 14) +#define LTQ_EBU_EMU_BC_ALEC_VAL(val) (((val) & 0x3) << 14) +#define LTQ_EBU_EMU_BC_ALEC_GET(val) ((((val) & LTQ_EBU_EMU_BC_ALEC) >> 14) & 0x3) +#define LTQ_EBU_EMU_BC_ALEC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_ALEC) | (((val) & 0x3) << 14)) +/* Byte Control Signal Timing Mode (13:12) */ +#define LTQ_EBU_EMU_BC_BCGEN (0x3 << 12) +#define LTQ_EBU_EMU_BC_BCGEN_VAL(val) (((val) & 0x3) << 12) +#define LTQ_EBU_EMU_BC_BCGEN_GET(val) ((((val) & LTQ_EBU_EMU_BC_BCGEN) >> 12) & 0x3) +#define LTQ_EBU_EMU_BC_BCGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_BCGEN) | (((val) & 0x3) << 12)) +/* Write Access Waitstate Control (10:8) */ +#define LTQ_EBU_EMU_BC_WAITWRC (0x7 << 8) +#define LTQ_EBU_EMU_BC_WAITWRC_VAL(val) (((val) & 0x7) << 8) +#define LTQ_EBU_EMU_BC_WAITWRC_GET(val) ((((val) & LTQ_EBU_EMU_BC_WAITWRC) >> 8) & 0x7) +#define LTQ_EBU_EMU_BC_WAITWRC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WAITWRC) | (((val) & 0x7) << 8)) +/* Read Access Waitstate Control (7:6) */ +#define LTQ_EBU_EMU_BC_WAITRDC (0x3 << 6) +#define LTQ_EBU_EMU_BC_WAITRDC_VAL(val) (((val) & 0x3) << 6) +#define LTQ_EBU_EMU_BC_WAITRDC_GET(val) ((((val) & LTQ_EBU_EMU_BC_WAITRDC) >> 6) & 0x3) +#define LTQ_EBU_EMU_BC_WAITRDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WAITRDC) | (((val) & 0x3) << 6)) +/* Hold/Pause Cycle Control (5:4) */ +#define LTQ_EBU_EMU_BC_HOLDC (0x3 << 4) +#define LTQ_EBU_EMU_BC_HOLDC_VAL(val) (((val) & 0x3) << 4) +#define LTQ_EBU_EMU_BC_HOLDC_GET(val) ((((val) & LTQ_EBU_EMU_BC_HOLDC) >> 4) & 0x3) +#define LTQ_EBU_EMU_BC_HOLDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_HOLDC) | (((val) & 0x3) << 4)) +/* Recovery Cycles Control (3:2) */ +#define LTQ_EBU_EMU_BC_RECOVC (0x3 << 2) +#define LTQ_EBU_EMU_BC_RECOVC_VAL(val) (((val) & 0x3) << 2) +#define LTQ_EBU_EMU_BC_RECOVC_GET(val) ((((val) & LTQ_EBU_EMU_BC_RECOVC) >> 2) & 0x3) +#define LTQ_EBU_EMU_BC_RECOVC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_RECOVC) | (((val) & 0x3) << 2)) +/* Cycle Multiplier Control (1:0) */ +#define LTQ_EBU_EMU_BC_CMULT (0x3) +#define LTQ_EBU_EMU_BC_CMULT_VAL(val) (((val) & 0x3) << 0) +#define LTQ_EBU_EMU_BC_CMULT_GET(val) ((((val) & LTQ_EBU_EMU_BC_CMULT) >> 0) & 0x3) +#define LTQ_EBU_EMU_BC_CMULT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_CMULT) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * PC-Card Control Register + ******************************************************************************/ + +/* External Interrupt Input IREQ (3:1) */ +#define LTQ_EBU_PCC_CON_IREQ (0x7 << 1) +#define LTQ_EBU_PCC_CON_IREQ_VAL(val) (((val) & 0x7) << 1) +#define LTQ_EBU_PCC_CON_IREQ_GET(val) ((((val) & LTQ_EBU_PCC_CON_IREQ) >> 1) & 0x7) +#define LTQ_EBU_PCC_CON_IREQ_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_CON_IREQ) | (((val) & 0x7) << 1)) +/* PC Card ON (0) */ +#define LTQ_EBU_PCC_CON_ON (0x1) +#define LTQ_EBU_PCC_CON_ON_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_PCC_CON_ON_GET(val) ((((val) & LTQ_EBU_PCC_CON_ON) >> 0) & 0x1) +#define LTQ_EBU_PCC_CON_ON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_CON_ON) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PCC Status Register + ******************************************************************************/ + +/* Interrupt Request (6) */ +#define LTQ_EBU_PCC_STAT_IRQ (0x1 << 6) +#define LTQ_EBU_PCC_STAT_IRQ_GET(val) ((((val) & LTQ_EBU_PCC_STAT_IRQ) >> 6) & 0x1) +/* PC-Card Overcurrent (5) */ +#define LTQ_EBU_PCC_STAT_OC (0x1 << 5) +#define LTQ_EBU_PCC_STAT_OC_GET(val) ((((val) & LTQ_EBU_PCC_STAT_OC) >> 5) & 0x1) +/* PC-Card Socket Power On (4) */ +#define LTQ_EBU_PCC_STAT_SPON (0x1 << 4) +#define LTQ_EBU_PCC_STAT_SPON_GET(val) ((((val) & LTQ_EBU_PCC_STAT_SPON) >> 4) & 0x1) +/* Card Detect Status (1:0) */ +#define LTQ_EBU_PCC_STAT_CD (0x3) +#define LTQ_EBU_PCC_STAT_CD_GET(val) ((((val) & LTQ_EBU_PCC_STAT_CD) >> 0) & 0x3) + +/******************************************************************************* + * PCC Interrupt Status Register + ******************************************************************************/ + +/* Interrupt Request Active Interrupt (4) */ +#define LTQ_EBU_PCC_ISTAT_IREQ (0x1 << 4) +#define LTQ_EBU_PCC_ISTAT_IREQ_VAL(val) (((val) & 0x1) << 4) +#define LTQ_EBU_PCC_ISTAT_IREQ_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_IREQ) >> 4) & 0x1) +#define LTQ_EBU_PCC_ISTAT_IREQ_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_IREQ) | (((val) & 0x1) << 4)) +/* Over Current Status Change Interrupt (3) */ +#define LTQ_EBU_PCC_ISTAT_OC (0x1 << 3) +#define LTQ_EBU_PCC_ISTAT_OC_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_PCC_ISTAT_OC_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_OC) >> 3) & 0x1) +#define LTQ_EBU_PCC_ISTAT_OC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_OC) | (((val) & 0x1) << 3)) +/* Socket Power on Status Change Interrupt (2) */ +#define LTQ_EBU_PCC_ISTAT_SPON (0x1 << 2) +#define LTQ_EBU_PCC_ISTAT_SPON_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_PCC_ISTAT_SPON_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_SPON) >> 2) & 0x1) +#define LTQ_EBU_PCC_ISTAT_SPON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_SPON) | (((val) & 0x1) << 2)) +/* Voltage Sense Status Change Interrupt (1) */ +#define LTQ_EBU_PCC_ISTAT_VS (0x1 << 1) +#define LTQ_EBU_PCC_ISTAT_VS_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_PCC_ISTAT_VS_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_VS) >> 1) & 0x1) +#define LTQ_EBU_PCC_ISTAT_VS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_VS) | (((val) & 0x1) << 1)) +/* Card Detect Status Change Interrupt (0) */ +#define LTQ_EBU_PCC_ISTAT_CD (0x1) +#define LTQ_EBU_PCC_ISTAT_CD_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_PCC_ISTAT_CD_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_CD) >> 0) & 0x1) +#define LTQ_EBU_PCC_ISTAT_CD_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_CD) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PCC Interrupt Enable Register + ******************************************************************************/ + +/* Enable of Interrupt Request IR (4) */ +#define LTQ_EBU_PCC_IEN_IR (0x1 << 4) +#define LTQ_EBU_PCC_IEN_IR_VAL(val) (((val) & 0x1) << 4) +#define LTQ_EBU_PCC_IEN_IR_GET(val) ((((val) & LTQ_EBU_PCC_IEN_IR) >> 4) & 0x1) +#define LTQ_EBU_PCC_IEN_IR_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_IR) | (((val) & 0x1) << 4)) +/* Enable of Interrupt Request OC event (3) */ +#define LTQ_EBU_PCC_IEN_OC (0x1 << 3) +#define LTQ_EBU_PCC_IEN_OC_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_PCC_IEN_OC_GET(val) ((((val) & LTQ_EBU_PCC_IEN_OC) >> 3) & 0x1) +#define LTQ_EBU_PCC_IEN_OC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_OC) | (((val) & 0x1) << 3)) +/* Enable of Interrupt Request Socket Power On (2) */ +#define LTQ_EBU_PCC_IEN_PWRON (0x1 << 2) +#define LTQ_EBU_PCC_IEN_PWRON_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_PCC_IEN_PWRON_GET(val) ((((val) & LTQ_EBU_PCC_IEN_PWRON) >> 2) & 0x1) +#define LTQ_EBU_PCC_IEN_PWRON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_PWRON) | (((val) & 0x1) << 2)) +/* Enable of Interrupt Request Voltage Sense (1) */ +#define LTQ_EBU_PCC_IEN_VS (0x1 << 1) +#define LTQ_EBU_PCC_IEN_VS_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_PCC_IEN_VS_GET(val) ((((val) & LTQ_EBU_PCC_IEN_VS) >> 1) & 0x1) +#define LTQ_EBU_PCC_IEN_VS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_VS) | (((val) & 0x1) << 1)) +/* Enable of Interrupt Request Card Detect (0) */ +#define LTQ_EBU_PCC_IEN_CD (0x1) +#define LTQ_EBU_PCC_IEN_CD_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_PCC_IEN_CD_GET(val) ((((val) & LTQ_EBU_PCC_IEN_CD) >> 0) & 0x1) +#define LTQ_EBU_PCC_IEN_CD_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_CD) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PCC Interrupt Output Status Register + ******************************************************************************/ + +/* Status of Interrupt Request IR (4) */ +#define LTQ_EBU_PCC_INT_OUT_IR (0x1 << 4) +#define LTQ_EBU_PCC_INT_OUT_IR_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_IR) >> 4) & 0x1) +/* Status of Interrupt Request OC (3) */ +#define LTQ_EBU_PCC_INT_OUT_OC (0x1 << 3) +#define LTQ_EBU_PCC_INT_OUT_OC_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_OC) >> 3) & 0x1) +/* Status of Interrupt Request Socket Power On (2) */ +#define LTQ_EBU_PCC_INT_OUT_PWRON (0x1 << 2) +#define LTQ_EBU_PCC_INT_OUT_PWRON_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_PWRON) >> 2) & 0x1) +/* Status of Interrupt Request Voltage Sense (1) */ +#define LTQ_EBU_PCC_INT_OUT_VS (0x1 << 1) +#define LTQ_EBU_PCC_INT_OUT_VS_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_VS) >> 1) & 0x1) +/* Status of Interrupt Request Card Detect (0) */ +#define LTQ_EBU_PCC_INT_OUT_CD (0x1) +#define LTQ_EBU_PCC_INT_OUT_CD_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_CD) >> 0) & 0x1) + +/******************************************************************************* + * PCC Interrupt Request Set Register + ******************************************************************************/ + +/* Set Interrupt Request IR (4) */ +#define LTQ_EBU_PCC_IRS_IR (0x1 << 4) +#define LTQ_EBU_PCC_IRS_IR_VAL(val) (((val) & 0x1) << 4) +#define LTQ_EBU_PCC_IRS_IR_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_IR) | (val) & 1) << 4) +/* Set Interrupt Request OC (3) */ +#define LTQ_EBU_PCC_IRS_OC (0x1 << 3) +#define LTQ_EBU_PCC_IRS_OC_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_PCC_IRS_OC_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_OC) | (val) & 1) << 3) +/* Set Interrupt Request Socket Power On (2) */ +#define LTQ_EBU_PCC_IRS_PWRON (0x1 << 2) +#define LTQ_EBU_PCC_IRS_PWRON_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_PCC_IRS_PWRON_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_PWRON) | (val) & 1) << 2) +/* Set Interrupt Request Voltage Sense (1) */ +#define LTQ_EBU_PCC_IRS_VS (0x1 << 1) +#define LTQ_EBU_PCC_IRS_VS_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_PCC_IRS_VS_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_VS) | (val) & 1) << 1) +/* Set Interrupt Request Card Detect (0) */ +#define LTQ_EBU_PCC_IRS_CD (0x1) +#define LTQ_EBU_PCC_IRS_CD_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_PCC_IRS_CD_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_CD) | (val) & 1) << 0) + +/******************************************************************************* + * NAND Flash Control Register + ******************************************************************************/ + +/* ECC Enabling (31) */ +#define LTQ_EBU_NAND_CON_ECC_ON (0x1 << 31) +#define LTQ_EBU_NAND_CON_ECC_ON_VAL(val) (((val) & 0x1) << 31) +#define LTQ_EBU_NAND_CON_ECC_ON_GET(val) ((((val) & LTQ_EBU_NAND_CON_ECC_ON) >> 31) & 0x1) +#define LTQ_EBU_NAND_CON_ECC_ON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_ECC_ON) | (((val) & 0x1) << 31)) +/* Latch enable (23:18) */ +#define LTQ_EBU_NAND_CON_LAT_EN (0x3f << 18) +#define LTQ_EBU_NAND_CON_LAT_EN_VAL(val) (((val) & 0x3f) << 18) +#define LTQ_EBU_NAND_CON_LAT_EN_GET(val) ((((val) & LTQ_EBU_NAND_CON_LAT_EN) >> 18) & 0x3f) +#define LTQ_EBU_NAND_CON_LAT_EN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_LAT_EN) | (((val) & 0x3f) << 18)) +/* Output ChipSelect# Selection (11:10) */ +#define LTQ_EBU_NAND_CON_OUT_CS_S (0x3 << 10) +#define LTQ_EBU_NAND_CON_OUT_CS_S_VAL(val) (((val) & 0x3) << 10) +#define LTQ_EBU_NAND_CON_OUT_CS_S_GET(val) ((((val) & LTQ_EBU_NAND_CON_OUT_CS_S) >> 10) & 0x3) +#define LTQ_EBU_NAND_CON_OUT_CS_S_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_OUT_CS_S) | (((val) & 0x3) << 10)) +/* Input ChipSelect# Selection (9:8) */ +#define LTQ_EBU_NAND_CON_IN_CS_S (0x3 << 8) +#define LTQ_EBU_NAND_CON_IN_CS_S_VAL(val) (((val) & 0x3) << 8) +#define LTQ_EBU_NAND_CON_IN_CS_S_GET(val) ((((val) & LTQ_EBU_NAND_CON_IN_CS_S) >> 8) & 0x3) +#define LTQ_EBU_NAND_CON_IN_CS_S_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_IN_CS_S) | (((val) & 0x3) << 8)) +/* Set PRE (7) */ +#define LTQ_EBU_NAND_CON_PRE_P (0x1 << 7) +#define LTQ_EBU_NAND_CON_PRE_P_VAL(val) (((val) & 0x1) << 7) +#define LTQ_EBU_NAND_CON_PRE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_PRE_P) >> 7) & 0x1) +#define LTQ_EBU_NAND_CON_PRE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_PRE_P) | (((val) & 0x1) << 7)) +/* Set WP Active Polarity (6) */ +#define LTQ_EBU_NAND_CON_WP_P (0x1 << 6) +#define LTQ_EBU_NAND_CON_WP_P_VAL(val) (((val) & 0x1) << 6) +#define LTQ_EBU_NAND_CON_WP_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_WP_P) >> 6) & 0x1) +#define LTQ_EBU_NAND_CON_WP_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_WP_P) | (((val) & 0x1) << 6)) +/* Set SE Active Polarity (5) */ +#define LTQ_EBU_NAND_CON_SE_P (0x1 << 5) +#define LTQ_EBU_NAND_CON_SE_P_VAL(val) (((val) & 0x1) << 5) +#define LTQ_EBU_NAND_CON_SE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_SE_P) >> 5) & 0x1) +#define LTQ_EBU_NAND_CON_SE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_SE_P) | (((val) & 0x1) << 5)) +/* Set CS Active Polarity (4) */ +#define LTQ_EBU_NAND_CON_CS_P (0x1 << 4) +#define LTQ_EBU_NAND_CON_CS_P_VAL(val) (((val) & 0x1) << 4) +#define LTQ_EBU_NAND_CON_CS_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_CS_P) >> 4) & 0x1) +#define LTQ_EBU_NAND_CON_CS_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_CS_P) | (((val) & 0x1) << 4)) +/* Set CLE Active Polarity (3) */ +#define LTQ_EBU_NAND_CON_CLE_P (0x1 << 3) +#define LTQ_EBU_NAND_CON_CLE_P_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_NAND_CON_CLE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_CLE_P) >> 3) & 0x1) +#define LTQ_EBU_NAND_CON_CLE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_CLE_P) | (((val) & 0x1) << 3)) +/* Set ALE Active Polarity (2) */ +#define LTQ_EBU_NAND_CON_ALE_P (0x1 << 2) +#define LTQ_EBU_NAND_CON_ALE_P_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_NAND_CON_ALE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_ALE_P) >> 2) & 0x1) +#define LTQ_EBU_NAND_CON_ALE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_ALE_P) | (((val) & 0x1) << 2)) +/* NAND CS Mux with EBU CS Enable (1) */ +#define LTQ_EBU_NAND_CON_CSMUX_E (0x1 << 1) +#define LTQ_EBU_NAND_CON_CSMUX_E_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_NAND_CON_CSMUX_E_GET(val) ((((val) & LTQ_EBU_NAND_CON_CSMUX_E) >> 1) & 0x1) +#define LTQ_EBU_NAND_CON_CSMUX_E_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_CSMUX_E) | (((val) & 0x1) << 1)) +/* NAND FLASH Mode Support (0) */ +#define LTQ_EBU_NAND_CON_NANDMODE (0x1) +#define LTQ_EBU_NAND_CON_NANDMODE_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_NAND_CON_NANDMODE_GET(val) ((((val) & LTQ_EBU_NAND_CON_NANDMODE) >> 0) & 0x1) +#define LTQ_EBU_NAND_CON_NANDMODE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_NANDMODE) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * NAND Flash State Register + ******************************************************************************/ + +/* Reserved (31:3) */ +#define LTQ_EBU_NAND_WAIT_RES (0x1fffffff << 3) +#define LTQ_EBU_NAND_WAIT_RES_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_RES) >> 3) & 0x1fffffff) +/* NAND Write Complete (3) */ +#define LTQ_EBU_NAND_WAIT_WR_C (0x1 << 3) +#define LTQ_EBU_NAND_WAIT_WR_C_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_WR_C) >> 3) & 0x1) +/* Record the RD Edge (rising ) (2) */ +#define LTQ_EBU_NAND_WAIT_RD_EDGE (0x1 << 2) +#define LTQ_EBU_NAND_WAIT_RD_EDGE_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_RD_EDGE) >> 2) & 0x1) +/* Record the BY# Edge (falling) (1) */ +#define LTQ_EBU_NAND_WAIT_BY_EDGE (0x1 << 1) +#define LTQ_EBU_NAND_WAIT_BY_EDGE_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_BY_EDGE) >> 1) & 0x1) +/* Rd/BY# value (0) */ +#define LTQ_EBU_NAND_WAIT_RDBY_VALUE (0x1) +#define LTQ_EBU_NAND_WAIT_RDBY_VALUE_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_RDBY_VALUE) >> 0) & 0x1) + +/******************************************************************************* + * NAND ECC Result Register 0 + ******************************************************************************/ + +/* Reserved (31:24) */ +#define LTQ_EBU_NAND_ECC0_RES (0xff << 24) +#define LTQ_EBU_NAND_ECC0_RES_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_RES) >> 24) & 0xff) +/* ECC value (23:16) */ +#define LTQ_EBU_NAND_ECC0_ECC_B2 (0xff << 16) +#define LTQ_EBU_NAND_ECC0_ECC_B2_VAL(val) (((val) & 0xff) << 16) +#define LTQ_EBU_NAND_ECC0_ECC_B2_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_ECC_B2) >> 16) & 0xff) +#define LTQ_EBU_NAND_ECC0_ECC_B2_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC0_ECC_B2) | (((val) & 0xff) << 16)) +/* ECC value (15:8) */ +#define LTQ_EBU_NAND_ECC0_ECC_B1 (0xff << 8) +#define LTQ_EBU_NAND_ECC0_ECC_B1_VAL(val) (((val) & 0xff) << 8) +#define LTQ_EBU_NAND_ECC0_ECC_B1_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_ECC_B1) >> 8) & 0xff) +#define LTQ_EBU_NAND_ECC0_ECC_B1_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC0_ECC_B1) | (((val) & 0xff) << 8)) +/* ECC value (7:0) */ +#define LTQ_EBU_NAND_ECC0_ECC_B0 (0xff) +#define LTQ_EBU_NAND_ECC0_ECC_B0_VAL(val) (((val) & 0xff) << 0) +#define LTQ_EBU_NAND_ECC0_ECC_B0_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_ECC_B0) >> 0) & 0xff) +#define LTQ_EBU_NAND_ECC0_ECC_B0_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC0_ECC_B0) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * NAND ECC Address Counter Register + ******************************************************************************/ + +/* Reserved (31:9) */ +#define LTQ_EBU_NAND_ECC_AC_RES (0x7fffff << 9) +#define LTQ_EBU_NAND_ECC_AC_RES_GET(val) ((((val) & LTQ_EBU_NAND_ECC_AC_RES) >> 9) & 0x7fffff) +/* ECC address counter (8:0) */ +#define LTQ_EBU_NAND_ECC_AC_ECC_AC (0x1ff) +#define LTQ_EBU_NAND_ECC_AC_ECC_AC_VAL(val) (((val) & 0x1ff) << 0) +#define LTQ_EBU_NAND_ECC_AC_ECC_AC_GET(val) ((((val) & LTQ_EBU_NAND_ECC_AC_ECC_AC) >> 0) & 0x1ff) +#define LTQ_EBU_NAND_ECC_AC_ECC_AC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC_AC_ECC_AC) | (((val) & 0x1ff) << 0)) + +/******************************************************************************* + * Internal Address Emulation Register + ******************************************************************************/ + +/* Memory Region Base Address (31:12) */ +#define LTQ_EBU_EMU_ADDR_BASE (0xfffff << 12) +#define LTQ_EBU_EMU_ADDR_BASE_VAL(val) (((val) & 0xfffff) << 12) +#define LTQ_EBU_EMU_ADDR_BASE_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_BASE) >> 12) & 0xfffff) +#define LTQ_EBU_EMU_ADDR_BASE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_BASE) | (((val) & 0xfffff) << 12)) +/* Memory Region Address Mask (7:4) */ +#define LTQ_EBU_EMU_ADDR_MASK (0xf << 4) +#define LTQ_EBU_EMU_ADDR_MASK_VAL(val) (((val) & 0xf) << 4) +#define LTQ_EBU_EMU_ADDR_MASK_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_MASK) >> 4) & 0xf) +#define LTQ_EBU_EMU_ADDR_MASK_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_MASK) | (((val) & 0xf) << 4)) +/* Memory Region Mirror Segment B Control (1) */ +#define LTQ_EBU_EMU_ADDR_MRMB (0x1 << 1) +#define LTQ_EBU_EMU_ADDR_MRMB_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_EMU_ADDR_MRMB_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_MRMB) >> 1) & 0x1) +#define LTQ_EBU_EMU_ADDR_MRMB_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_MRMB) | (((val) & 0x1) << 1)) +/* Memory Region Enable Control (0) */ +#define LTQ_EBU_EMU_ADDR_MREC (0x1) +#define LTQ_EBU_EMU_ADDR_MREC_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_EMU_ADDR_MREC_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_MREC) >> 0) & 0x1) +#define LTQ_EBU_EMU_ADDR_MREC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_MREC) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * nternal Emulator Configuration Register + ******************************************************************************/ + +/* Overlay Memory Control Region 3 (3) */ +#define LTQ_EBU_EMU_CON_OVL3 (0x1 << 3) +#define LTQ_EBU_EMU_CON_OVL3_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_EMU_CON_OVL3_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL3) >> 3) & 0x1) +#define LTQ_EBU_EMU_CON_OVL3_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL3) | (((val) & 0x1) << 3)) +/* Overlay Memory Control Region 2 (2) */ +#define LTQ_EBU_EMU_CON_OVL2 (0x1 << 2) +#define LTQ_EBU_EMU_CON_OVL2_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_EMU_CON_OVL2_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL2) >> 2) & 0x1) +#define LTQ_EBU_EMU_CON_OVL2_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL2) | (((val) & 0x1) << 2)) +/* Overlay Memory Control Region 1 (1) */ +#define LTQ_EBU_EMU_CON_OVL1 (0x1 << 1) +#define LTQ_EBU_EMU_CON_OVL1_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_EMU_CON_OVL1_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL1) >> 1) & 0x1) +#define LTQ_EBU_EMU_CON_OVL1_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL1) | (((val) & 0x1) << 1)) +/* Overlay Memory Control Region 0 (0) */ +#define LTQ_EBU_EMU_CON_OVL0 (0x1) +#define LTQ_EBU_EMU_CON_OVL0_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_EMU_CON_OVL0_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL0) >> 0) & 0x1) +#define LTQ_EBU_EMU_CON_OVL0_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL0) | (((val) & 0x1) << 0)) + +#endif /* __LTQ_EBU_H */ diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/es_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/es_reg.h new file mode 100644 index 000000000..da84900f5 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/es_reg.h @@ -0,0 +1,2098 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __ES_REG_H +#define __ES_REG_H + +#define es_r32(reg) ltq_r32(&es->reg) +#define es_w32(val, reg) ltq_w32(val, &es->reg) +#define es_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &es->reg) + +/** ES register structure */ +struct svip_reg_es { + volatile unsigned long ps; /* 0x0000 */ + volatile unsigned long p0_ctl; /* 0x0004 */ + volatile unsigned long p1_ctl; /* 0x0008 */ + volatile unsigned long p2_ctl; /* 0x000C */ + volatile unsigned long p0_vlan; /* 0x0010 */ + volatile unsigned long p1_vlan; /* 0x0014 */ + volatile unsigned long p2_vlan; /* 0x0018 */ + volatile unsigned long reserved1[1]; /* 0x001C */ + volatile unsigned long p0_inctl; /* 0x0020 */ + volatile unsigned long p1_inctl; /* 0x0024 */ + volatile unsigned long p2_inctl; /* 0x0028 */ + volatile unsigned long reserved2[1]; /* 0x002C */ + volatile unsigned long p0_ecs_q32; /* 0x0030 */ + volatile unsigned long p0_ecs_q10; /* 0x0034 */ + volatile unsigned long p0_ecw_q32; /* 0x0038 */ + volatile unsigned long p0_ecw_q10; /* 0x003C */ + volatile unsigned long p1_ecs_q32; /* 0x0040 */ + volatile unsigned long p1_ecs_q10; /* 0x0044 */ + volatile unsigned long p1_ecw_q32; /* 0x0048 */ + volatile unsigned long p1_ecw_q10; /* 0x004C */ + volatile unsigned long p2_ecs_q32; /* 0x0050 */ + volatile unsigned long p2_ecs_q10; /* 0x0054 */ + volatile unsigned long p2_ecw_q32; /* 0x0058 */ + volatile unsigned long p2_ecw_q10; /* 0x005C */ + volatile unsigned long int_ena; /* 0x0060 */ + volatile unsigned long int_st; /* 0x0064 */ + volatile unsigned long sw_gctl0; /* 0x0068 */ + volatile unsigned long sw_gctl1; /* 0x006C */ + volatile unsigned long arp; /* 0x0070 */ + volatile unsigned long strm_ctl; /* 0x0074 */ + volatile unsigned long rgmii_ctl; /* 0x0078 */ + volatile unsigned long prt_1p; /* 0x007C */ + volatile unsigned long gbkt_szbs; /* 0x0080 */ + volatile unsigned long gbkt_szebs; /* 0x0084 */ + volatile unsigned long bf_th; /* 0x0088 */ + volatile unsigned long pmac_hd_ctl; /* 0x008C */ + volatile unsigned long pmac_sa1; /* 0x0090 */ + volatile unsigned long pmac_sa2; /* 0x0094 */ + volatile unsigned long pmac_da1; /* 0x0098 */ + volatile unsigned long pmac_da2; /* 0x009C */ + volatile unsigned long pmac_vlan; /* 0x00A0 */ + volatile unsigned long pmac_tx_ipg; /* 0x00A4 */ + volatile unsigned long pmac_rx_ipg; /* 0x00A8 */ + volatile unsigned long adr_tb_ctl0; /* 0x00AC */ + volatile unsigned long adr_tb_ctl1; /* 0x00B0 */ + volatile unsigned long adr_tb_ctl2; /* 0x00B4 */ + volatile unsigned long adr_tb_st0; /* 0x00B8 */ + volatile unsigned long adr_tb_st1; /* 0x00BC */ + volatile unsigned long adr_tb_st2; /* 0x00C0 */ + volatile unsigned long rmon_ctl; /* 0x00C4 */ + volatile unsigned long rmon_st; /* 0x00C8 */ + volatile unsigned long mdio_ctl; /* 0x00CC */ + volatile unsigned long mdio_data; /* 0x00D0 */ + volatile unsigned long tp_flt_act; /* 0x00D4 */ + volatile unsigned long prtcl_flt_act; /* 0x00D8 */ + volatile unsigned long reserved4[9]; /* 0xdc */ + volatile unsigned long vlan_flt0; /* 0x0100 */ + volatile unsigned long vlan_flt1; /* 0x0104 */ + volatile unsigned long vlan_flt2; /* 0x0108 */ + volatile unsigned long vlan_flt3; /* 0x010C */ + volatile unsigned long vlan_flt4; /* 0x0110 */ + volatile unsigned long vlan_flt5; /* 0x0114 */ + volatile unsigned long vlan_flt6; /* 0x0118 */ + volatile unsigned long vlan_flt7; /* 0x011C */ + volatile unsigned long vlan_flt8; /* 0x0120 */ + volatile unsigned long vlan_flt9; /* 0x0124 */ + volatile unsigned long vlan_flt10; /* 0x0128 */ + volatile unsigned long vlan_flt11; /* 0x012C */ + volatile unsigned long vlan_flt12; /* 0x0130 */ + volatile unsigned long vlan_flt13; /* 0x0134 */ + volatile unsigned long vlan_flt14; /* 0x0138 */ + volatile unsigned long vlan_flt15; /* 0x013C */ + volatile unsigned long tp_flt10; /* 0x0140 */ + volatile unsigned long tp_flt32; /* 0x0144 */ + volatile unsigned long tp_flt54; /* 0x0148 */ + volatile unsigned long tp_flt76; /* 0x014C */ + volatile unsigned long dfsrv_map0; /* 0x0150 */ + volatile unsigned long dfsrv_map1; /* 0x0154 */ + volatile unsigned long dfsrv_map2; /* 0x0158 */ + volatile unsigned long dfsrv_map3; /* 0x015C */ + volatile unsigned long tcp_pf0; /* 0x0160 */ + volatile unsigned long tcp_pf1; /* 0x0164 */ + volatile unsigned long tcp_pf2; /* 0x0168 */ + volatile unsigned long tcp_pf3; /* 0x016C */ + volatile unsigned long tcp_pf4; /* 0x0170 */ + volatile unsigned long tcp_pf5; /* 0x0174 */ + volatile unsigned long tcp_pf6; /* 0x0178 */ + volatile unsigned long tcp_pf7; /* 0x017C */ + volatile unsigned long ra_03_00; /* 0x0180 */ + volatile unsigned long ra_07_04; /* 0x0184 */ + volatile unsigned long ra_0b_08; /* 0x0188 */ + volatile unsigned long ra_0f_0c; /* 0x018C */ + volatile unsigned long ra_13_10; /* 0x0190 */ + volatile unsigned long ra_17_14; /* 0x0194 */ + volatile unsigned long ra_1b_18; /* 0x0198 */ + volatile unsigned long ra_1f_1c; /* 0x019C */ + volatile unsigned long ra_23_20; /* 0x01A0 */ + volatile unsigned long ra_27_24; /* 0x01A4 */ + volatile unsigned long ra_2b_28; /* 0x01A8 */ + volatile unsigned long ra_2f_2c; /* 0x01AC */ + volatile unsigned long prtcl_f0; /* 0x01B0 */ + volatile unsigned long prtcl_f1; /* 0x01B4 */ +}; + +/******************************************************************************* + * ES + ******************************************************************************/ +#define LTQ_ES_PS_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0000)) +#define LTQ_ES_P0_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0004)) +#define LTQ_ES_P1_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0008)) +#define LTQ_ES_P2_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x000C)) +#define LTQ_ES_P0_VLAN_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0010)) +#define LTQ_ES_P1_VLAN_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0014)) +#define LTQ_ES_P2_VLAN_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0010)) +#define LTQ_ES_P0_INCTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0020)) +#define LTQ_ES_P1_INCTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0024)) +#define LTQ_ES_P2_INCTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0028)) +#define LTQ_ES_P0_ECS_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0030)) +#define LTQ_ES_P0_ECS_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0034)) +#define LTQ_ES_P0_ECW_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0038)) +#define LTQ_ES_P0_ECW_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x003C)) +#define LTQ_ES_P1_ECS_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0030)) +#define LTQ_ES_P1_ECS_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0034)) +#define LTQ_ES_P1_ECW_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0038)) +#define LTQ_ES_P1_ECW_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x003C)) +#define LTQ_ES_P2_ECS_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0030)) +#define LTQ_ES_P2_ECS_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0034)) +#define LTQ_ES_P2_ECW_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0038)) +#define LTQ_ES_P2_ECW_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x003C)) +#define LTQ_ES_INT_ENA_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0060)) +#define LTQ_ES_INT_ST_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0064)) +#define LTQ_ES_SW_GCTL0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0068)) +#define LTQ_ES_SW_GCTL1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x006C)) +#define LTQ_ES_ARP_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0070)) +#define LTQ_ES_STRM_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0074)) +#define LTQ_ES_RGMII_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0078)) +#define LTQ_ES_PRT_1P_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x007C)) +#define LTQ_ES_GBKT_SZBS_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0080)) +#define LTQ_ES_GBKT_SZEBS_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0084)) +#define LTQ_ES_BF_TH_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0088)) +#define LTQ_ES_PMAC_HD_CTL ((volatile unsigned int*)(LTQ_ES_BASE + 0x008C)) +#define LTQ_ES_PMAC_SA1 ((volatile unsigned int*)(LTQ_ES_BASE + 0x0090)) +#define LTQ_ES_PMAC_SA2 ((volatile unsigned int*)(LTQ_ES_BASE + 0x0094)) +#define LTQ_ES_PMAC_DA1 ((volatile unsigned int*)(LTQ_ES_BASE + 0x0098)) +#define LTQ_ES_PMAC_DA2 ((volatile unsigned int*)(LTQ_ES_BASE + 0x009C)) +#define LTQ_ES_PMAC_VLAN ((volatile unsigned int*)(LTQ_ES_BASE + 0x00A0)) +#define LTQ_ES_PMAC_TX_IPG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00A4)) +#define LTQ_ES_PMAC_RX_IPG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00A8)) +#define LTQ_ES_ADR_TB_CTL0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00AC)) +#define LTQ_ES_ADR_TB_CTL1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00B0)) +#define LTQ_ES_ADR_TB_CTL2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00B4)) +#define LTQ_ES_ADR_TB_ST0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00B8)) +#define LTQ_ES_ADR_TB_ST1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00BC)) +#define LTQ_ES_ADR_TB_ST2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00C0)) +#define LTQ_ES_RMON_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00C4)) +#define LTQ_ES_RMON_ST_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00C8)) +#define LTQ_ES_MDIO_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00CC)) +#define LTQ_ES_MDIO_DATA_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00D0)) +#define LTQ_ES_TP_FLT_ACT_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00D4)) +#define LTQ_ES_PRTCL_FLT_ACT_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00D8)) +#define LTQ_ES_VLAN_FLT0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0100)) +#define LTQ_ES_VLAN_FLT1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0104)) +#define LTQ_ES_VLAN_FLT2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0108)) +#define LTQ_ES_VLAN_FLT3_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x010C)) +#define LTQ_ES_VLAN_FLT4_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0110)) +#define LTQ_ES_VLAN_FLT5_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0114)) +#define LTQ_ES_VLAN_FLT6_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0118)) +#define LTQ_ES_VLAN_FLT7_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x011C)) +#define LTQ_ES_VLAN_FLT8_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0120)) +#define LTQ_ES_VLAN_FLT9_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0124)) +#define LTQ_ES_VLAN_FLT10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0128)) +#define LTQ_ES_VLAN_FLT11_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x012C)) +#define LTQ_ES_VLAN_FLT12_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0130)) +#define LTQ_ES_VLAN_FLT13_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0134)) +#define LTQ_ES_VLAN_FLT14_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0138)) +#define LTQ_ES_VLAN_FLT15_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x013C)) +#define LTQ_ES_TP_FLT10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0140)) +#define LTQ_ES_TP_FLT32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0144)) +#define LTQ_ES_TP_FLT54_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0148)) +#define LTQ_ES_TP_FLT76_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x014C)) +#define LTQ_ES_DFSRV_MAP0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0150)) +#define LTQ_ES_DFSRV_MAP1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0154)) +#define LTQ_ES_DFSRV_MAP2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0158)) +#define LTQ_ES_DFSRV_MAP3_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x015C)) +#define LTQ_ES_TCP_PF0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0160)) +#define LTQ_ES_TCP_PF1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0164)) +#define LTQ_ES_TCP_PF2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0168)) +#define LTQ_ES_TCP_PF3_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x016C)) +#define LTQ_ES_TCP_PF4_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0170)) +#define LTQ_ES_TCP_PF5_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0174)) +#define LTQ_ES_TCP_PF6_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0178)) +#define LTQ_ES_TCP_PF7_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x017C)) +#define LTQ_ES_RA_03_00_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0180)) +#define LTQ_ES_RA_07_04_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0184)) +#define LTQ_ES_RA_0B_08_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0188)) +#define LTQ_ES_RA_0F_0C_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x018C)) +#define LTQ_ES_RA_13_10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0190)) +#define LTQ_ES_RA_17_14_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0194)) +#define LTQ_ES_RA_1B_18_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0198)) +#define LTQ_ES_RA_1F_1C_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x019C)) +#define LTQ_ES_RA_23_20_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01A0)) +#define LTQ_ES_RA_27_24_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01A4)) +#define LTQ_ES_RA_2B_28_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01A8)) +#define LTQ_ES_RA_2F_2C_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01AC)) +#define LTQ_ES_PRTCL_F0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01B0)) +#define LTQ_ES_PRTCL_F1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01B4)) + +/******************************************************************************* + * Port Status Register + ******************************************************************************/ + +/* Port 1 Flow Control Status (12) */ +#define LTQ_ES_PS_REG_P1FCS (0x1 << 12) +#define LTQ_ES_PS_REG_P1FCS_GET(val) ((((val) & LTQ_ES_PS_REG_P1FCS) >> 12) & 0x1) +/* Port 1 Duplex Status (11) */ +#define LTQ_ES_PS_REG_P1DS (0x1 << 11) +#define LTQ_ES_PS_REG_P1DS_GET(val) ((((val) & LTQ_ES_PS_REG_P1DS) >> 11) & 0x1) +/* Port 1 Speed High Status (10) */ +#define LTQ_ES_PS_REG_P1SHS (0x1 << 10) +#define LTQ_ES_PS_REG_P1SHS_GET(val) ((((val) & LTQ_ES_PS_REG_P1SHS) >> 10) & 0x1) +/* Port 1 Speed Status (9) */ +#define LTQ_ES_PS_REG_P1SS (0x1 << 9) +#define LTQ_ES_PS_REG_P1SS_GET(val) ((((val) & LTQ_ES_PS_REG_P1SS) >> 9) & 0x1) +/* Port 1 Link Status (8) */ +#define LTQ_ES_PS_REG_P1LS (0x1 << 8) +#define LTQ_ES_PS_REG_P1LS_GET(val) ((((val) & LTQ_ES_PS_REG_P1LS) >> 8) & 0x1) +/* Port 0 Flow Control Status (4) */ +#define LTQ_ES_PS_REG_P0FCS (0x1 << 4) +#define LTQ_ES_PS_REG_P0FCS_GET(val) ((((val) & LTQ_ES_PS_REG_P0FCS) >> 4) & 0x1) +/* Port 0 Duplex Status (3) */ +#define LTQ_ES_PS_REG_P0DS (0x1 << 3) +#define LTQ_ES_PS_REG_P0DS_GET(val) ((((val) & LTQ_ES_PS_REG_P0DS) >> 3) & 0x1) +/* Port 0 Speed High Status (2) */ +#define LTQ_ES_PS_REG_P0SHS (0x1 << 2) +#define LTQ_ES_PS_REG_P0SHS_GET(val) ((((val) & LTQ_ES_PS_REG_P0SHS) >> 2) & 0x1) +/* Port 0 Speed Status (1) */ +#define LTQ_ES_PS_REG_P0SS (0x1 << 1) +#define LTQ_ES_PS_REG_P0SS_GET(val) ((((val) & LTQ_ES_PS_REG_P0SS) >> 1) & 0x1) +/* Port 0 Link Status (0) */ +#define LTQ_ES_PS_REG_P0LS (0x1) +#define LTQ_ES_PS_REG_P0LS_GET(val) ((((val) & LTQ_ES_PS_REG_P0LS) >> 0) & 0x1) + +/******************************************************************************* + * P0 Control Register + ******************************************************************************/ + +/* STP/RSTP port state (31:30) */ +#define LTQ_ES_P0_CTL_REG_SPS (0x3 << 30) +#define LTQ_ES_P0_CTL_REG_SPS_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_P0_CTL_REG_SPS_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_SPS) >> 30) & 0x3) +#define LTQ_ES_P0_CTL_REG_SPS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_SPS) | (((val) & 0x3) << 30)) +/* TCP/UDP PRIEN (29) */ +#define LTQ_ES_P0_CTL_REG_TCPE (0x1 << 29) +#define LTQ_ES_P0_CTL_REG_TCPE_VAL(val) (((val) & 0x1) << 29) +#define LTQ_ES_P0_CTL_REG_TCPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_TCPE) >> 29) & 0x1) +#define LTQ_ES_P0_CTL_REG_TCPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_TCPE) | (((val) & 0x1) << 29)) +/* IP over TCP/UDP (28) */ +#define LTQ_ES_P0_CTL_REG_IPOVTU (0x1 << 28) +#define LTQ_ES_P0_CTL_REG_IPOVTU_VAL(val) (((val) & 0x1) << 28) +#define LTQ_ES_P0_CTL_REG_IPOVTU_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_IPOVTU) >> 28) & 0x1) +#define LTQ_ES_P0_CTL_REG_IPOVTU_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_IPOVTU) | (((val) & 0x1) << 28)) +/* VLAN Priority Enable (27) */ +#define LTQ_ES_P0_CTL_REG_VPE (0x1 << 27) +#define LTQ_ES_P0_CTL_REG_VPE_VAL(val) (((val) & 0x1) << 27) +#define LTQ_ES_P0_CTL_REG_VPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_VPE) >> 27) & 0x1) +#define LTQ_ES_P0_CTL_REG_VPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_VPE) | (((val) & 0x1) << 27)) +/* Service Priority Enable (26) */ +#define LTQ_ES_P0_CTL_REG_SPE (0x1 << 26) +#define LTQ_ES_P0_CTL_REG_SPE_VAL(val) (((val) & 0x1) << 26) +#define LTQ_ES_P0_CTL_REG_SPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_SPE) >> 26) & 0x1) +#define LTQ_ES_P0_CTL_REG_SPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_SPE) | (((val) & 0x1) << 26)) +/* IP over VLAN PRI (25) */ +#define LTQ_ES_P0_CTL_REG_IPVLAN (0x1 << 25) +#define LTQ_ES_P0_CTL_REG_IPVLAN_VAL(val) (((val) & 0x1) << 25) +#define LTQ_ES_P0_CTL_REG_IPVLAN_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_IPVLAN) >> 25) & 0x1) +#define LTQ_ES_P0_CTL_REG_IPVLAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_IPVLAN) | (((val) & 0x1) << 25)) +/* Ether Type Priority Enable (24) */ +#define LTQ_ES_P0_CTL_REG_TPE (0x1 << 24) +#define LTQ_ES_P0_CTL_REG_TPE_VAL(val) (((val) & 0x1) << 24) +#define LTQ_ES_P0_CTL_REG_TPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_TPE) >> 24) & 0x1) +#define LTQ_ES_P0_CTL_REG_TPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_TPE) | (((val) & 0x1) << 24)) +/* Force Link Up (18) */ +#define LTQ_ES_P0_CTL_REG_FLP (0x1 << 18) +#define LTQ_ES_P0_CTL_REG_FLP_VAL(val) (((val) & 0x1) << 18) +#define LTQ_ES_P0_CTL_REG_FLP_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_FLP) >> 18) & 0x1) +#define LTQ_ES_P0_CTL_REG_FLP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_FLP) | (((val) & 0x1) << 18)) +/* Force Link Down (17) */ +#define LTQ_ES_P0_CTL_REG_FLD (0x1 << 17) +#define LTQ_ES_P0_CTL_REG_FLD_VAL(val) (((val) & 0x1) << 17) +#define LTQ_ES_P0_CTL_REG_FLD_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_FLD) >> 17) & 0x1) +#define LTQ_ES_P0_CTL_REG_FLD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_FLD) | (((val) & 0x1) << 17)) +/* Ratio Mode for WFQ (16) */ +#define LTQ_ES_P0_CTL_REG_RMWFQ (0x1 << 16) +#define LTQ_ES_P0_CTL_REG_RMWFQ_VAL(val) (((val) & 0x1) << 16) +#define LTQ_ES_P0_CTL_REG_RMWFQ_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_RMWFQ) >> 16) & 0x1) +#define LTQ_ES_P0_CTL_REG_RMWFQ_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_RMWFQ) | (((val) & 0x1) << 16)) +/* Aging Disable (15) */ +#define LTQ_ES_P0_CTL_REG_AD (0x1 << 15) +#define LTQ_ES_P0_CTL_REG_AD_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_P0_CTL_REG_AD_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_AD) >> 15) & 0x1) +#define LTQ_ES_P0_CTL_REG_AD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_AD) | (((val) & 0x1) << 15)) +/* Learning Disable (14) */ +#define LTQ_ES_P0_CTL_REG_LD (0x1 << 14) +#define LTQ_ES_P0_CTL_REG_LD_VAL(val) (((val) & 0x1) << 14) +#define LTQ_ES_P0_CTL_REG_LD_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_LD) >> 14) & 0x1) +#define LTQ_ES_P0_CTL_REG_LD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_LD) | (((val) & 0x1) << 14)) +/* Maximum Number of Addresses (12:8) */ +#define LTQ_ES_P0_CTL_REG_MNA024 (0x1f << 8) +#define LTQ_ES_P0_CTL_REG_MNA024_VAL(val) (((val) & 0x1f) << 8) +#define LTQ_ES_P0_CTL_REG_MNA024_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_MNA024) >> 8) & 0x1f) +#define LTQ_ES_P0_CTL_REG_MNA024_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_MNA024) | (((val) & 0x1f) << 8)) +/* PPPOE Port Only (7) */ +#define LTQ_ES_P0_CTL_REG_PPPOEP (0x1 << 7) +#define LTQ_ES_P0_CTL_REG_PPPOEP_VAL(val) (((val) & 0x1) << 7) +#define LTQ_ES_P0_CTL_REG_PPPOEP_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_PPPOEP) >> 7) & 0x1) +#define LTQ_ES_P0_CTL_REG_PPPOEP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_PPPOEP) | (((val) & 0x1) << 7)) +/* PPPOE Manage (6) */ +#define LTQ_ES_P0_CTL_REG_PM (0x1 << 6) +#define LTQ_ES_P0_CTL_REG_PM_VAL(val) (((val) & 0x1) << 6) +#define LTQ_ES_P0_CTL_REG_PM_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_PM) >> 6) & 0x1) +#define LTQ_ES_P0_CTL_REG_PM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_PM) | (((val) & 0x1) << 6)) +/* Port Mirror Option (5:4) */ +#define LTQ_ES_P0_CTL_REG_IPMO (0x3 << 4) +#define LTQ_ES_P0_CTL_REG_IPMO_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_P0_CTL_REG_IPMO_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_IPMO) >> 4) & 0x3) +#define LTQ_ES_P0_CTL_REG_IPMO_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_IPMO) | (((val) & 0x3) << 4)) +/* 802.1x Port Authorized state (3:2) */ +#define LTQ_ES_P0_CTL_REG_PAS (0x3 << 2) +#define LTQ_ES_P0_CTL_REG_PAS_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_P0_CTL_REG_PAS_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_PAS) >> 2) & 0x3) +#define LTQ_ES_P0_CTL_REG_PAS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_PAS) | (((val) & 0x3) << 2)) +/* Drop Scheme for voilation 802.1x (1) */ +#define LTQ_ES_P0_CTL_REG_DSV8021X (0x1 << 1) +#define LTQ_ES_P0_CTL_REG_DSV8021X_VAL(val) (((val) & 0x1) << 1) +#define LTQ_ES_P0_CTL_REG_DSV8021X_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_DSV8021X) >> 1) & 0x1) +#define LTQ_ES_P0_CTL_REG_DSV8021X_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_DSV8021X) | (((val) & 0x1) << 1)) +/* ByPass Mode for Output (0) */ +#define LTQ_ES_P0_CTL_REG_BYPASS (0x1) +#define LTQ_ES_P0_CTL_REG_BYPASS_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_P0_CTL_REG_BYPASS_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_BYPASS) >> 0) & 0x1) +#define LTQ_ES_P0_CTL_REG_BYPASS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_BYPASS) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 0 VLAN Control Register + ******************************************************************************/ + +/* Default FID (31:30) */ +#define LTQ_ES_P0_VLAN_REG_DFID (0x3 << 30) +#define LTQ_ES_P0_VLAN_REG_DFID_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_P0_VLAN_REG_DFID_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_DFID) >> 30) & 0x3) +#define LTQ_ES_P0_VLAN_REG_DFID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_DFID) | (((val) & 0x3) << 30)) +/* Tagged Base VLAN Enable (29) */ +#define LTQ_ES_P0_VLAN_REG_TBVE (0x1 << 29) +#define LTQ_ES_P0_VLAN_REG_TBVE_VAL(val) (((val) & 0x1) << 29) +#define LTQ_ES_P0_VLAN_REG_TBVE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_TBVE) >> 29) & 0x1) +#define LTQ_ES_P0_VLAN_REG_TBVE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_TBVE) | (((val) & 0x1) << 29)) +/* Input Force No TAG Enable (28) */ +#define LTQ_ES_P0_VLAN_REG_IFNTE (0x1 << 28) +#define LTQ_ES_P0_VLAN_REG_IFNTE_VAL(val) (((val) & 0x1) << 28) +#define LTQ_ES_P0_VLAN_REG_IFNTE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_IFNTE) >> 28) & 0x1) +#define LTQ_ES_P0_VLAN_REG_IFNTE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_IFNTE) | (((val) & 0x1) << 28)) +/* VID Check with the VID table (27) */ +#define LTQ_ES_P0_VLAN_REG_VC (0x1 << 27) +#define LTQ_ES_P0_VLAN_REG_VC_VAL(val) (((val) & 0x1) << 27) +#define LTQ_ES_P0_VLAN_REG_VC_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_VC) >> 27) & 0x1) +#define LTQ_ES_P0_VLAN_REG_VC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_VC) | (((val) & 0x1) << 27)) +/* VLAN Security Disable (26) */ +#define LTQ_ES_P0_VLAN_REG_VSD (0x1 << 26) +#define LTQ_ES_P0_VLAN_REG_VSD_VAL(val) (((val) & 0x1) << 26) +#define LTQ_ES_P0_VLAN_REG_VSD_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_VSD) >> 26) & 0x1) +#define LTQ_ES_P0_VLAN_REG_VSD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_VSD) | (((val) & 0x1) << 26)) +/* Admit Only VLAN_Tagged Packet (25) */ +#define LTQ_ES_P0_VLAN_REG_AOVTP (0x1 << 25) +#define LTQ_ES_P0_VLAN_REG_AOVTP_VAL(val) (((val) & 0x1) << 25) +#define LTQ_ES_P0_VLAN_REG_AOVTP_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_AOVTP) >> 25) & 0x1) +#define LTQ_ES_P0_VLAN_REG_AOVTP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_AOVTP) | (((val) & 0x1) << 25)) +/* VLAN Member Check Enable (24) */ +#define LTQ_ES_P0_VLAN_REG_VMCE (0x1 << 24) +#define LTQ_ES_P0_VLAN_REG_VMCE_VAL(val) (((val) & 0x1) << 24) +#define LTQ_ES_P0_VLAN_REG_VMCE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_VMCE) >> 24) & 0x1) +#define LTQ_ES_P0_VLAN_REG_VMCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_VMCE) | (((val) & 0x1) << 24)) +/* Reserved (23:19) */ +#define LTQ_ES_P0_VLAN_REG_RES (0x1f << 19) +#define LTQ_ES_P0_VLAN_REG_RES_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_RES) >> 19) & 0x1f) +/* Default VLAN Port Map (18:16) */ +#define LTQ_ES_P0_VLAN_REG_DVPM (0x7 << 16) +#define LTQ_ES_P0_VLAN_REG_DVPM_VAL(val) (((val) & 0x7) << 16) +#define LTQ_ES_P0_VLAN_REG_DVPM_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_DVPM) >> 16) & 0x7) +#define LTQ_ES_P0_VLAN_REG_DVPM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_DVPM) | (((val) & 0x7) << 16)) +/* Port Priority (15:14) */ +#define LTQ_ES_P0_VLAN_REG_PP (0x3 << 14) +#define LTQ_ES_P0_VLAN_REG_PP_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_P0_VLAN_REG_PP_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PP) >> 14) & 0x3) +#define LTQ_ES_P0_VLAN_REG_PP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PP) | (((val) & 0x3) << 14)) +/* Port Priority Enable (13) */ +#define LTQ_ES_P0_VLAN_REG_PPE (0x1 << 13) +#define LTQ_ES_P0_VLAN_REG_PPE_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_P0_VLAN_REG_PPE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PPE) >> 13) & 0x1) +#define LTQ_ES_P0_VLAN_REG_PPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PPE) | (((val) & 0x1) << 13)) +/* Portbase VLAN tag member for Port 0 (12) */ +#define LTQ_ES_P0_VLAN_REG_PVTAGMP (0x1 << 12) +#define LTQ_ES_P0_VLAN_REG_PVTAGMP_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_P0_VLAN_REG_PVTAGMP_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PVTAGMP) >> 12) & 0x1) +#define LTQ_ES_P0_VLAN_REG_PVTAGMP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PVTAGMP) | (((val) & 0x1) << 12)) +/* PVID (11:0) */ +#define LTQ_ES_P0_VLAN_REG_PVID (0xfff) +#define LTQ_ES_P0_VLAN_REG_PVID_VAL(val) (((val) & 0xfff) << 0) +#define LTQ_ES_P0_VLAN_REG_PVID_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PVID) >> 0) & 0xfff) +#define LTQ_ES_P0_VLAN_REG_PVID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PVID) | (((val) & 0xfff) << 0)) + +/******************************************************************************* + * Port 0 Ingress Control Register + ******************************************************************************/ + +/* Reserved (31:13) */ +#define LTQ_ES_P0_INCTL_REG_RES (0x7ffff << 13) +#define LTQ_ES_P0_INCTL_REG_RES_GET(val) ((((val) & LTQ_ES_P0_INCTL_REG_RES) >> 13) & 0x7ffff) +/* Port 0 Ingress/Egress Timer Tick T selection (12:11) */ +#define LTQ_ES_P0_INCTL_REG_P0ITT (0x3 << 11) +#define LTQ_ES_P0_INCTL_REG_P0ITT_VAL(val) (((val) & 0x3) << 11) +#define LTQ_ES_P0_INCTL_REG_P0ITT_GET(val) ((((val) & LTQ_ES_P0_INCTL_REG_P0ITT) >> 11) & 0x3) +#define LTQ_ES_P0_INCTL_REG_P0ITT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_INCTL_REG_P0ITT) | (((val) & 0x3) << 11)) +/* Port 0 Igress Token R (10:0) */ +#define LTQ_ES_P0_INCTL_REG_P0ITR (0x7ff) +#define LTQ_ES_P0_INCTL_REG_P0ITR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_INCTL_REG_P0ITR_GET(val) ((((val) & LTQ_ES_P0_INCTL_REG_P0ITR) >> 0) & 0x7ff) +#define LTQ_ES_P0_INCTL_REG_P0ITR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_INCTL_REG_P0ITR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Port 0 Egress Control for Strict Q32 Register + ******************************************************************************/ + +/* Port 0 Egress Token R for Strict Priority Q3 (26:16) */ +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR (0x7ff << 16) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR_VAL(val) (((val) & 0x7ff) << 16) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR) >> 16) & 0x7ff) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR) | (((val) & 0x7ff) << 16)) +/* Port 0 Egress Token R for Strict Priority Q2 (10:0) */ +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR (0x7ff) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR) >> 0) & 0x7ff) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Port 0 Egress Control for Strict Q10 Register + ******************************************************************************/ + +/* Reserved (31:27) */ +#define LTQ_ES_P0_ECS_Q10_REG_RES (0x1f << 27) +#define LTQ_ES_P0_ECS_Q10_REG_RES_GET(val) ((((val) & LTQ_ES_P0_ECS_Q10_REG_RES) >> 27) & 0x1f) +/* Port 0 Egress Token R for Strict Priority Q1 (26:16) */ +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR (0x7ff << 16) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR_VAL(val) (((val) & 0x7ff) << 16) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR) >> 16) & 0x7ff) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR) | (((val) & 0x7ff) << 16)) +/* Port 0 Egress Token R for Strict Priority Q0 (10:0) */ +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR (0x7ff) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR) >> 0) & 0x7ff) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Port 0 Egress Control for WFQ Q32 Register + ******************************************************************************/ + +/* Reserved (31:27) */ +#define LTQ_ES_P0_ECW_Q32_REG_RES (0x1f << 27) +#define LTQ_ES_P0_ECW_Q32_REG_RES_GET(val) ((((val) & LTQ_ES_P0_ECW_Q32_REG_RES) >> 27) & 0x1f) +/* Port 0 Egress Token R for WFQ Q3 (26:16) */ +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR (0x7ff << 16) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR_VAL(val) (((val) & 0x7ff) << 16) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR) >> 16) & 0x7ff) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR) | (((val) & 0x7ff) << 16)) +/* Port 0 Egress Token R for WFQ Q2 (10:0) */ +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR (0x7ff) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR) >> 0) & 0x7ff) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Port 0 Egress Control for WFQ Q10 Register + ******************************************************************************/ + +/* Reserved (31:27) */ +#define LTQ_ES_P0_ECW_Q10_REG_RES (0x1f << 27) +#define LTQ_ES_P0_ECW_Q10_REG_RES_GET(val) ((((val) & LTQ_ES_P0_ECW_Q10_REG_RES) >> 27) & 0x1f) +/* Port 0 Egress Token R for WFQ Q1 (26:16) */ +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR (0x7ff << 16) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR_VAL(val) (((val) & 0x7ff) << 16) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR) >> 16) & 0x7ff) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR) | (((val) & 0x7ff) << 16)) +/* Port 0 Egress Token R for WFQ Q0 (10:0) */ +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR (0x7ff) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR) >> 0) & 0x7ff) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Interrupt Enable Register + ******************************************************************************/ + +/* Reserved (31:8) */ +#define LTQ_ES_INT_ENA_REG_RES (0xffffff << 8) +#define LTQ_ES_INT_ENA_REG_RES_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_RES) >> 8) & 0xffffff) +/* Data Buffer is Full Interrupt Enable (7) */ +#define LTQ_ES_INT_ENA_REG_DBFIE (0x1 << 7) +#define LTQ_ES_INT_ENA_REG_DBFIE_VAL(val) (((val) & 0x1) << 7) +#define LTQ_ES_INT_ENA_REG_DBFIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_DBFIE) >> 7) & 0x1) +#define LTQ_ES_INT_ENA_REG_DBFIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_DBFIE) | (((val) & 0x1) << 7)) +/* Data Buffer is nearly Full Interrupt Enable (6) */ +#define LTQ_ES_INT_ENA_REG_DBNFIE (0x1 << 6) +#define LTQ_ES_INT_ENA_REG_DBNFIE_VAL(val) (((val) & 0x1) << 6) +#define LTQ_ES_INT_ENA_REG_DBNFIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_DBNFIE) >> 6) & 0x1) +#define LTQ_ES_INT_ENA_REG_DBNFIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_DBNFIE) | (((val) & 0x1) << 6)) +/* Learning Table Full Interrupt Enable (5) */ +#define LTQ_ES_INT_ENA_REG_LTFIE (0x1 << 5) +#define LTQ_ES_INT_ENA_REG_LTFIE_VAL(val) (((val) & 0x1) << 5) +#define LTQ_ES_INT_ENA_REG_LTFIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_LTFIE) >> 5) & 0x1) +#define LTQ_ES_INT_ENA_REG_LTFIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_LTFIE) | (((val) & 0x1) << 5)) +/* Leaning Table Access Done Interrupt Enable (4) */ +#define LTQ_ES_INT_ENA_REG_LTADIE (0x1 << 4) +#define LTQ_ES_INT_ENA_REG_LTADIE_VAL(val) (((val) & 0x1) << 4) +#define LTQ_ES_INT_ENA_REG_LTADIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_LTADIE) >> 4) & 0x1) +#define LTQ_ES_INT_ENA_REG_LTADIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_LTADIE) | (((val) & 0x1) << 4)) +/* Port Security Violation Interrupt Enable (3:1) */ +#define LTQ_ES_INT_ENA_REG_PSVIE (0x7 << 1) +#define LTQ_ES_INT_ENA_REG_PSVIE_VAL(val) (((val) & 0x7) << 1) +#define LTQ_ES_INT_ENA_REG_PSVIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_PSVIE) >> 1) & 0x7) +#define LTQ_ES_INT_ENA_REG_PSVIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_PSVIE) | (((val) & 0x7) << 1)) +/* Port Status Change Interrupt Enable (0) */ +#define LTQ_ES_INT_ENA_REG_PSCIE (0x1) +#define LTQ_ES_INT_ENA_REG_PSCIE_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_INT_ENA_REG_PSCIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_PSCIE) >> 0) & 0x1) +#define LTQ_ES_INT_ENA_REG_PSCIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_PSCIE) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Interrupt Status Register + ******************************************************************************/ + +/* Reserved (31:8) */ +#define LTQ_ES_INT_ST_REG_RES (0xffffff << 8) +#define LTQ_ES_INT_ST_REG_RES_GET(val) ((((val) & LTQ_ES_INT_ST_REG_RES) >> 8) & 0xffffff) +/* Data Buffer is Full (7) */ +#define LTQ_ES_INT_ST_REG_DBF (0x1 << 7) +#define LTQ_ES_INT_ST_REG_DBF_GET(val) ((((val) & LTQ_ES_INT_ST_REG_DBF) >> 7) & 0x1) +/* Data Buffer is nearly Full (6) */ +#define LTQ_ES_INT_ST_REG_DBNF (0x1 << 6) +#define LTQ_ES_INT_ST_REG_DBNF_GET(val) ((((val) & LTQ_ES_INT_ST_REG_DBNF) >> 6) & 0x1) +/* Learning Table Full (5) */ +#define LTQ_ES_INT_ST_REG_LTF (0x1 << 5) +#define LTQ_ES_INT_ST_REG_LTF_GET(val) ((((val) & LTQ_ES_INT_ST_REG_LTF) >> 5) & 0x1) +/* Leaning Table Access Done (4) */ +#define LTQ_ES_INT_ST_REG_LTAD (0x1 << 4) +#define LTQ_ES_INT_ST_REG_LTAD_GET(val) ((((val) & LTQ_ES_INT_ST_REG_LTAD) >> 4) & 0x1) +/* Port Security Violation (3:1) */ +#define LTQ_ES_INT_ST_REG_PSV (0x7 << 1) +#define LTQ_ES_INT_ST_REG_PSV_GET(val) ((((val) & LTQ_ES_INT_ST_REG_PSV) >> 1) & 0x7) +/* Port Status Change (0) */ +#define LTQ_ES_INT_ST_REG_PSC (0x1) +#define LTQ_ES_INT_ST_REG_PSC_GET(val) ((((val) & LTQ_ES_INT_ST_REG_PSC) >> 0) & 0x1) + +/******************************************************************************* + * Switch Global Control Register 0 + ******************************************************************************/ + +/* Switch Enable (31) */ +#define LTQ_ES_SW_GCTL0_REG_SE (0x1 << 31) +#define LTQ_ES_SW_GCTL0_REG_SE_VAL(val) (((val) & 0x1) << 31) +#define LTQ_ES_SW_GCTL0_REG_SE_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_SE) >> 31) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_SE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_SE) | (((val) & 0x1) << 31)) +/* CRC Check Disable (30) */ +#define LTQ_ES_SW_GCTL0_REG_ICRCCD (0x1 << 30) +#define LTQ_ES_SW_GCTL0_REG_ICRCCD_VAL(val) (((val) & 0x1) << 30) +#define LTQ_ES_SW_GCTL0_REG_ICRCCD_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_ICRCCD) >> 30) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_ICRCCD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_ICRCCD) | (((val) & 0x1) << 30)) +/* Replace VID0 (28) */ +#define LTQ_ES_SW_GCTL0_REG_RVID0 (0x1 << 28) +#define LTQ_ES_SW_GCTL0_REG_RVID0_VAL(val) (((val) & 0x1) << 28) +#define LTQ_ES_SW_GCTL0_REG_RVID0_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_RVID0) >> 28) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_RVID0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_RVID0) | (((val) & 0x1) << 28)) +/* Replace VID1 (27) */ +#define LTQ_ES_SW_GCTL0_REG_RVID1 (0x1 << 27) +#define LTQ_ES_SW_GCTL0_REG_RVID1_VAL(val) (((val) & 0x1) << 27) +#define LTQ_ES_SW_GCTL0_REG_RVID1_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_RVID1) >> 27) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_RVID1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_RVID1) | (((val) & 0x1) << 27)) +/* Replace VIDFFF (26) */ +#define LTQ_ES_SW_GCTL0_REG_RVIDFFF (0x1 << 26) +#define LTQ_ES_SW_GCTL0_REG_RVIDFFF_VAL(val) (((val) & 0x1) << 26) +#define LTQ_ES_SW_GCTL0_REG_RVIDFFF_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_RVIDFFF) >> 26) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_RVIDFFF_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_RVIDFFF) | (((val) & 0x1) << 26)) +/* Priority Change Rule (25) */ +#define LTQ_ES_SW_GCTL0_REG_PCR (0x1 << 25) +#define LTQ_ES_SW_GCTL0_REG_PCR_VAL(val) (((val) & 0x1) << 25) +#define LTQ_ES_SW_GCTL0_REG_PCR_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_PCR) >> 25) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_PCR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_PCR) | (((val) & 0x1) << 25)) +/* Priority Change Enable (24) */ +#define LTQ_ES_SW_GCTL0_REG_PCE (0x1 << 24) +#define LTQ_ES_SW_GCTL0_REG_PCE_VAL(val) (((val) & 0x1) << 24) +#define LTQ_ES_SW_GCTL0_REG_PCE_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_PCE) >> 24) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_PCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_PCE) | (((val) & 0x1) << 24)) +/* Transmit Short IPG Enable (23) */ +#define LTQ_ES_SW_GCTL0_REG_TSIPGE (0x1 << 23) +#define LTQ_ES_SW_GCTL0_REG_TSIPGE_VAL(val) (((val) & 0x1) << 23) +#define LTQ_ES_SW_GCTL0_REG_TSIPGE_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_TSIPGE) >> 23) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_TSIPGE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_TSIPGE) | (((val) & 0x1) << 23)) +/* PHY Base Address (22) */ +#define LTQ_ES_SW_GCTL0_REG_PHYBA (0x1 << 22) +#define LTQ_ES_SW_GCTL0_REG_PHYBA_VAL(val) (((val) & 0x1) << 22) +#define LTQ_ES_SW_GCTL0_REG_PHYBA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_PHYBA) >> 22) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_PHYBA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_PHYBA) | (((val) & 0x1) << 22)) +/* Drop Packet When Excessive Collision Happen (21) */ +#define LTQ_ES_SW_GCTL0_REG_DPWECH (0x1 << 21) +#define LTQ_ES_SW_GCTL0_REG_DPWECH_VAL(val) (((val) & 0x1) << 21) +#define LTQ_ES_SW_GCTL0_REG_DPWECH_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DPWECH) >> 21) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_DPWECH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DPWECH) | (((val) & 0x1) << 21)) +/* Aging Timer Select (20:18) */ +#define LTQ_ES_SW_GCTL0_REG_ATS (0x7 << 18) +#define LTQ_ES_SW_GCTL0_REG_ATS_VAL(val) (((val) & 0x7) << 18) +#define LTQ_ES_SW_GCTL0_REG_ATS_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_ATS) >> 18) & 0x7) +#define LTQ_ES_SW_GCTL0_REG_ATS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_ATS) | (((val) & 0x7) << 18)) +/* Mirror CRC Also (17) */ +#define LTQ_ES_SW_GCTL0_REG_MCA (0x1 << 17) +#define LTQ_ES_SW_GCTL0_REG_MCA_VAL(val) (((val) & 0x1) << 17) +#define LTQ_ES_SW_GCTL0_REG_MCA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MCA) >> 17) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MCA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MCA) | (((val) & 0x1) << 17)) +/* Mirror RXER Also (16) */ +#define LTQ_ES_SW_GCTL0_REG_MRA (0x1 << 16) +#define LTQ_ES_SW_GCTL0_REG_MRA_VAL(val) (((val) & 0x1) << 16) +#define LTQ_ES_SW_GCTL0_REG_MRA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MRA) >> 16) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MRA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MRA) | (((val) & 0x1) << 16)) +/* Mirror PAUSE Also (15) */ +#define LTQ_ES_SW_GCTL0_REG_MPA (0x1 << 15) +#define LTQ_ES_SW_GCTL0_REG_MPA_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_SW_GCTL0_REG_MPA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MPA) >> 15) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MPA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MPA) | (((val) & 0x1) << 15)) +/* Mirror Long Also (14) */ +#define LTQ_ES_SW_GCTL0_REG_MLA (0x1 << 14) +#define LTQ_ES_SW_GCTL0_REG_MLA_VAL(val) (((val) & 0x1) << 14) +#define LTQ_ES_SW_GCTL0_REG_MLA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MLA) >> 14) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MLA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MLA) | (((val) & 0x1) << 14)) +/* Mirror Short Also (13) */ +#define LTQ_ES_SW_GCTL0_REG_MSA (0x1 << 13) +#define LTQ_ES_SW_GCTL0_REG_MSA_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_SW_GCTL0_REG_MSA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MSA) >> 13) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MSA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MSA) | (((val) & 0x1) << 13)) +/* Sniffer port number (12:11) */ +#define LTQ_ES_SW_GCTL0_REG_SNIFFPN (0x3 << 11) +#define LTQ_ES_SW_GCTL0_REG_SNIFFPN_VAL(val) (((val) & 0x3) << 11) +#define LTQ_ES_SW_GCTL0_REG_SNIFFPN_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_SNIFFPN) >> 11) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_SNIFFPN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_SNIFFPN) | (((val) & 0x3) << 11)) +/* Max Packet Length (MAXPKTLEN) (9:8) */ +#define LTQ_ES_SW_GCTL0_REG_MPL (0x3 << 8) +#define LTQ_ES_SW_GCTL0_REG_MPL_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_SW_GCTL0_REG_MPL_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MPL) >> 8) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_MPL_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MPL) | (((val) & 0x3) << 8)) +/* Discard Mode (Drop scheme for Packets Classified as Q3) (7:6) */ +#define LTQ_ES_SW_GCTL0_REG_DMQ3 (0x3 << 6) +#define LTQ_ES_SW_GCTL0_REG_DMQ3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_SW_GCTL0_REG_DMQ3_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ3) >> 6) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ3) | (((val) & 0x3) << 6)) +/* Discard Mode (Drop scheme for Packets Classified as Q2) (5:4) */ +#define LTQ_ES_SW_GCTL0_REG_DMQ2 (0x3 << 4) +#define LTQ_ES_SW_GCTL0_REG_DMQ2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_SW_GCTL0_REG_DMQ2_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ2) >> 4) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ2) | (((val) & 0x3) << 4)) +/* Discard Mode (Drop scheme for Packets Classified as Q1) (3:2) */ +#define LTQ_ES_SW_GCTL0_REG_DMQ1 (0x3 << 2) +#define LTQ_ES_SW_GCTL0_REG_DMQ1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_SW_GCTL0_REG_DMQ1_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ1) >> 2) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ1) | (((val) & 0x3) << 2)) +/* Discard Mode (Drop scheme for Packets Classified as Q0) (1:0) */ +#define LTQ_ES_SW_GCTL0_REG_DMQ0 (0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_SW_GCTL0_REG_DMQ0_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ0) >> 0) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * Switch Global Control Register 1 + ******************************************************************************/ + +/* BIST Done (27) */ +#define LTQ_ES_SW_GCTL1_REG_BISTDN (0x1 << 27) +#define LTQ_ES_SW_GCTL1_REG_BISTDN_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_BISTDN) >> 27) & 0x1) +/* Enable drop scheme of TX and RX (26) */ +#define LTQ_ES_SW_GCTL1_REG_EDSTX (0x1 << 26) +#define LTQ_ES_SW_GCTL1_REG_EDSTX_VAL(val) (((val) & 0x1) << 26) +#define LTQ_ES_SW_GCTL1_REG_EDSTX_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_EDSTX) >> 26) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_EDSTX_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_EDSTX) | (((val) & 0x1) << 26)) +/* Congestion threshold for TX queue (25:24) */ +#define LTQ_ES_SW_GCTL1_REG_CTTX (0x3 << 24) +#define LTQ_ES_SW_GCTL1_REG_CTTX_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_SW_GCTL1_REG_CTTX_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_CTTX) >> 24) & 0x3) +#define LTQ_ES_SW_GCTL1_REG_CTTX_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_CTTX) | (((val) & 0x3) << 24)) +/* Input Jam Threshold (23:21) */ +#define LTQ_ES_SW_GCTL1_REG_IJT (0x7 << 21) +#define LTQ_ES_SW_GCTL1_REG_IJT_VAL(val) (((val) & 0x7) << 21) +#define LTQ_ES_SW_GCTL1_REG_IJT_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_IJT) >> 21) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_IJT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_IJT) | (((val) & 0x7) << 21)) +/* Do not Identify VLAN after SNAP (20) */ +#define LTQ_ES_SW_GCTL1_REG_DIVS (0x1 << 20) +#define LTQ_ES_SW_GCTL1_REG_DIVS_VAL(val) (((val) & 0x1) << 20) +#define LTQ_ES_SW_GCTL1_REG_DIVS_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIVS) >> 20) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIVS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIVS) | (((val) & 0x1) << 20)) +/* Do not Identify IPV6 in PPPOE (19) */ +#define LTQ_ES_SW_GCTL1_REG_DII6P (0x1 << 19) +#define LTQ_ES_SW_GCTL1_REG_DII6P_VAL(val) (((val) & 0x1) << 19) +#define LTQ_ES_SW_GCTL1_REG_DII6P_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DII6P) >> 19) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DII6P_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DII6P) | (((val) & 0x1) << 19)) +/* Do not Identify IP in PPPOE after SNAP (18) */ +#define LTQ_ES_SW_GCTL1_REG_DIIPS (0x1 << 18) +#define LTQ_ES_SW_GCTL1_REG_DIIPS_VAL(val) (((val) & 0x1) << 18) +#define LTQ_ES_SW_GCTL1_REG_DIIPS_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIIPS) >> 18) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIIPS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIIPS) | (((val) & 0x1) << 18)) +/* Do not Identify Ether-Type = 0x0800, IP VER = 6 as IPV6 packets (17) */ +#define LTQ_ES_SW_GCTL1_REG_DIE (0x1 << 17) +#define LTQ_ES_SW_GCTL1_REG_DIE_VAL(val) (((val) & 0x1) << 17) +#define LTQ_ES_SW_GCTL1_REG_DIE_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIE) >> 17) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIE) | (((val) & 0x1) << 17)) +/* Do not Identify IP in PPPOE (16) */ +#define LTQ_ES_SW_GCTL1_REG_DIIP (0x1 << 16) +#define LTQ_ES_SW_GCTL1_REG_DIIP_VAL(val) (((val) & 0x1) << 16) +#define LTQ_ES_SW_GCTL1_REG_DIIP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIIP) >> 16) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIIP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIIP) | (((val) & 0x1) << 16)) +/* Do not Identify SNAP (15) */ +#define LTQ_ES_SW_GCTL1_REG_DIS (0x1 << 15) +#define LTQ_ES_SW_GCTL1_REG_DIS_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_SW_GCTL1_REG_DIS_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIS) >> 15) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIS) | (((val) & 0x1) << 15)) +/* Unicast Portmap (14:12) */ +#define LTQ_ES_SW_GCTL1_REG_UP (0x7 << 12) +#define LTQ_ES_SW_GCTL1_REG_UP_VAL(val) (((val) & 0x7) << 12) +#define LTQ_ES_SW_GCTL1_REG_UP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_UP) >> 12) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_UP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_UP) | (((val) & 0x7) << 12)) +/* Broadcast Portmap (10:8) */ +#define LTQ_ES_SW_GCTL1_REG_BP (0x7 << 8) +#define LTQ_ES_SW_GCTL1_REG_BP_VAL(val) (((val) & 0x7) << 8) +#define LTQ_ES_SW_GCTL1_REG_BP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_BP) >> 8) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_BP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_BP) | (((val) & 0x7) << 8)) +/* Multicast Portmap (6:4) */ +#define LTQ_ES_SW_GCTL1_REG_MP (0x7 << 4) +#define LTQ_ES_SW_GCTL1_REG_MP_VAL(val) (((val) & 0x7) << 4) +#define LTQ_ES_SW_GCTL1_REG_MP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_MP) >> 4) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_MP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_MP) | (((val) & 0x7) << 4)) +/* Reserve Portmap (2:0) */ +#define LTQ_ES_SW_GCTL1_REG_RP (0x7) +#define LTQ_ES_SW_GCTL1_REG_RP_VAL(val) (((val) & 0x7) << 0) +#define LTQ_ES_SW_GCTL1_REG_RP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_RP) >> 0) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_RP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_RP) | (((val) & 0x7) << 0)) + +/******************************************************************************* + * ARP/RARP Register + ******************************************************************************/ + +/* MAC Control Action (15:14) */ +#define LTQ_ES_ARP_REG_MACA (0x3 << 14) +#define LTQ_ES_ARP_REG_MACA_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_ARP_REG_MACA_GET(val) ((((val) & LTQ_ES_ARP_REG_MACA) >> 14) & 0x3) +#define LTQ_ES_ARP_REG_MACA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_MACA) | (((val) & 0x3) << 14)) +/* Unicast packet Treated as Cross_VLAN packet (13) */ +#define LTQ_ES_ARP_REG_UPT (0x1 << 13) +#define LTQ_ES_ARP_REG_UPT_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_ARP_REG_UPT_GET(val) ((((val) & LTQ_ES_ARP_REG_UPT) >> 13) & 0x1) +#define LTQ_ES_ARP_REG_UPT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_UPT) | (((val) & 0x1) << 13)) +/* RARP Packet Treated as Cross_VLAN Packet (12) */ +#define LTQ_ES_ARP_REG_RPT (0x1 << 12) +#define LTQ_ES_ARP_REG_RPT_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_ARP_REG_RPT_GET(val) ((((val) & LTQ_ES_ARP_REG_RPT) >> 12) & 0x1) +#define LTQ_ES_ARP_REG_RPT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RPT) | (((val) & 0x1) << 12)) +/* RARP/ARP Packet Action (11:10) */ +#define LTQ_ES_ARP_REG_RAPA (0x3 << 10) +#define LTQ_ES_ARP_REG_RAPA_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_ARP_REG_RAPA_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPA) >> 10) & 0x3) +#define LTQ_ES_ARP_REG_RAPA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPA) | (((val) & 0x3) << 10)) +/* RARP/ARP Packet Priority Enable (9) */ +#define LTQ_ES_ARP_REG_RAPPE (0x1 << 9) +#define LTQ_ES_ARP_REG_RAPPE_VAL(val) (((val) & 0x1) << 9) +#define LTQ_ES_ARP_REG_RAPPE_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPPE) >> 9) & 0x1) +#define LTQ_ES_ARP_REG_RAPPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPPE) | (((val) & 0x1) << 9)) +/* RARP/ARP Packet Priority (8:7) */ +#define LTQ_ES_ARP_REG_RAPP (0x3 << 7) +#define LTQ_ES_ARP_REG_RAPP_VAL(val) (((val) & 0x3) << 7) +#define LTQ_ES_ARP_REG_RAPP_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPP) >> 7) & 0x3) +#define LTQ_ES_ARP_REG_RAPP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPP) | (((val) & 0x3) << 7)) +/* RARP/ARP Packet Output Tag Handle (6:5) */ +#define LTQ_ES_ARP_REG_RAPOTH (0x3 << 5) +#define LTQ_ES_ARP_REG_RAPOTH_VAL(val) (((val) & 0x3) << 5) +#define LTQ_ES_ARP_REG_RAPOTH_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPOTH) >> 5) & 0x3) +#define LTQ_ES_ARP_REG_RAPOTH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPOTH) | (((val) & 0x3) << 5)) +/* ARP Packet Treated as Cross _ VLAN Packet (4) */ +#define LTQ_ES_ARP_REG_APT (0x1 << 4) +#define LTQ_ES_ARP_REG_APT_VAL(val) (((val) & 0x1) << 4) +#define LTQ_ES_ARP_REG_APT_GET(val) ((((val) & LTQ_ES_ARP_REG_APT) >> 4) & 0x1) +#define LTQ_ES_ARP_REG_APT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_APT) | (((val) & 0x1) << 4)) +/* RARP/ARP Packet Treated as Management Packet (3) */ +#define LTQ_ES_ARP_REG_RAPTM (0x1 << 3) +#define LTQ_ES_ARP_REG_RAPTM_VAL(val) (((val) & 0x1) << 3) +#define LTQ_ES_ARP_REG_RAPTM_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPTM) >> 3) & 0x1) +#define LTQ_ES_ARP_REG_RAPTM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPTM) | (((val) & 0x1) << 3)) +/* RARP/ARP Packet Treated as Span Packet (2) */ +#define LTQ_ES_ARP_REG_TAPTS (0x1 << 2) +#define LTQ_ES_ARP_REG_TAPTS_VAL(val) (((val) & 0x1) << 2) +#define LTQ_ES_ARP_REG_TAPTS_GET(val) ((((val) & LTQ_ES_ARP_REG_TAPTS) >> 2) & 0x1) +#define LTQ_ES_ARP_REG_TAPTS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_TAPTS) | (((val) & 0x1) << 2)) +/* Trap ARP Packet (1) */ +#define LTQ_ES_ARP_REG_TAP (0x1 << 1) +#define LTQ_ES_ARP_REG_TAP_VAL(val) (((val) & 0x1) << 1) +#define LTQ_ES_ARP_REG_TAP_GET(val) ((((val) & LTQ_ES_ARP_REG_TAP) >> 1) & 0x1) +#define LTQ_ES_ARP_REG_TAP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_TAP) | (((val) & 0x1) << 1)) +/* Trap RARP Packet (0) */ +#define LTQ_ES_ARP_REG_TRP (0x1) +#define LTQ_ES_ARP_REG_TRP_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_ARP_REG_TRP_GET(val) ((((val) & LTQ_ES_ARP_REG_TRP) >> 0) & 0x1) +#define LTQ_ES_ARP_REG_TRP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_TRP) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Storm control Register + ******************************************************************************/ + +/* Reserved (31:29) */ +#define LTQ_ES_STRM_CTL_REG_RES (0x7 << 29) +#define LTQ_ES_STRM_CTL_REG_RES_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_RES) >> 29) & 0x7) +/* 10M Threshold (28:16) */ +#define LTQ_ES_STRM_CTL_REG_STORM_10_TH (0x1fff << 16) +#define LTQ_ES_STRM_CTL_REG_STORM_10_TH_VAL(val) (((val) & 0x1fff) << 16) +#define LTQ_ES_STRM_CTL_REG_STORM_10_TH_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_10_TH) >> 16) & 0x1fff) +#define LTQ_ES_STRM_CTL_REG_STORM_10_TH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_10_TH) | (((val) & 0x1fff) << 16)) +/* Storm Enable for Broadcast Packets (15) */ +#define LTQ_ES_STRM_CTL_REG_STORM_B (0x1 << 15) +#define LTQ_ES_STRM_CTL_REG_STORM_B_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_STRM_CTL_REG_STORM_B_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_B) >> 15) & 0x1) +#define LTQ_ES_STRM_CTL_REG_STORM_B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_B) | (((val) & 0x1) << 15)) +/* Storm Enable for Multicast Packets (14) */ +#define LTQ_ES_STRM_CTL_REG_STORM_M (0x1 << 14) +#define LTQ_ES_STRM_CTL_REG_STORM_M_VAL(val) (((val) & 0x1) << 14) +#define LTQ_ES_STRM_CTL_REG_STORM_M_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_M) >> 14) & 0x1) +#define LTQ_ES_STRM_CTL_REG_STORM_M_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_M) | (((val) & 0x1) << 14)) +/* Storm Enable for Un-learned Unicast Packets (13) */ +#define LTQ_ES_STRM_CTL_REG_STORM_U (0x1 << 13) +#define LTQ_ES_STRM_CTL_REG_STORM_U_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_STRM_CTL_REG_STORM_U_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_U) >> 13) & 0x1) +#define LTQ_ES_STRM_CTL_REG_STORM_U_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_U) | (((val) & 0x1) << 13)) +/* 100M Threshold (12:0) */ +#define LTQ_ES_STRM_CTL_REG_STORM_100_TH (0x1fff) +#define LTQ_ES_STRM_CTL_REG_STORM_100_TH_VAL(val) (((val) & 0x1fff) << 0) +#define LTQ_ES_STRM_CTL_REG_STORM_100_TH_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_100_TH) >> 0) & 0x1fff) +#define LTQ_ES_STRM_CTL_REG_STORM_100_TH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_100_TH) | (((val) & 0x1fff) << 0)) + +/******************************************************************************* + * RGMII/GMII Port Control Register + ******************************************************************************/ + +/* Management Clock Select (31:24) */ +#define LTQ_ES_RGMII_CTL_REG_MCS (0xff << 24) +#define LTQ_ES_RGMII_CTL_REG_MCS_VAL(val) (((val) & 0xff) << 24) +#define LTQ_ES_RGMII_CTL_REG_MCS_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_MCS) >> 24) & 0xff) +#define LTQ_ES_RGMII_CTL_REG_MCS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_MCS) | (((val) & 0xff) << 24)) +/* Interface Selection (19:18) */ +#define LTQ_ES_RGMII_CTL_REG_IS (0x3 << 18) +#define LTQ_ES_RGMII_CTL_REG_IS_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_IS) >> 18) & 0x3) +/* Port 1 RGMII Rx Clock Delay (17:16) */ +#define LTQ_ES_RGMII_CTL_REG_P1RDLY (0x3 << 16) +#define LTQ_ES_RGMII_CTL_REG_P1RDLY_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_RGMII_CTL_REG_P1RDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1RDLY) >> 16) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P1RDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1RDLY) | (((val) & 0x3) << 16)) +/* Port 1 RGMII Tx Clock Delay (15:14) */ +#define LTQ_ES_RGMII_CTL_REG_P1TDLY (0x3 << 14) +#define LTQ_ES_RGMII_CTL_REG_P1TDLY_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_RGMII_CTL_REG_P1TDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1TDLY) >> 14) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P1TDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1TDLY) | (((val) & 0x3) << 14)) +/* Port 1 Speed (13:12) */ +#define LTQ_ES_RGMII_CTL_REG_P1SPD (0x3 << 12) +#define LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_RGMII_CTL_REG_P1SPD_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1SPD) >> 12) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P1SPD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1SPD) | (((val) & 0x3) << 12)) +/* Port 1 Duplex mode (11) */ +#define LTQ_ES_RGMII_CTL_REG_P1DUP (0x1 << 11) +#define LTQ_ES_RGMII_CTL_REG_P1DUP_VAL(val) (((val) & 0x1) << 11) +#define LTQ_ES_RGMII_CTL_REG_P1DUP_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1DUP) >> 11) & 0x1) +#define LTQ_ES_RGMII_CTL_REG_P1DUP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1DUP) | (((val) & 0x1) << 11)) +/* Port 1 Flow Control Enable (10) */ +#define LTQ_ES_RGMII_CTL_REG_P1FCE (0x1 << 10) +#define LTQ_ES_RGMII_CTL_REG_P1FCE_VAL(val) (((val) & 0x1) << 10) +#define LTQ_ES_RGMII_CTL_REG_P1FCE_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1FCE) >> 10) & 0x1) +#define LTQ_ES_RGMII_CTL_REG_P1FCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1FCE) | (((val) & 0x1) << 10)) +/* Port 0 RGMII Rx Clock Delay (7:6) */ +#define LTQ_ES_RGMII_CTL_REG_P0RDLY (0x3 << 6) +#define LTQ_ES_RGMII_CTL_REG_P0RDLY_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_RGMII_CTL_REG_P0RDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0RDLY) >> 6) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P0RDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0RDLY) | (((val) & 0x3) << 6)) +/* Port 0 RGMII Tx Clock Delay (5:4) */ +#define LTQ_ES_RGMII_CTL_REG_P0TDLY (0x3 << 4) +#define LTQ_ES_RGMII_CTL_REG_P0TDLY_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_RGMII_CTL_REG_P0TDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0TDLY) >> 4) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P0TDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0TDLY) | (((val) & 0x3) << 4)) +/* Port 0 Speed (3:2) */ +#define LTQ_ES_RGMII_CTL_REG_P0SPD (0x3 << 2) +#define LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_RGMII_CTL_REG_P0SPD_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0SPD) >> 2) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P0SPD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0SPD) | (((val) & 0x3) << 2)) +/* Port 0 Duplex mode (1) */ +#define LTQ_ES_RGMII_CTL_REG_P0DUP (0x1 << 1) +#define LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(val) (((val) & 0x1) << 1) +#define LTQ_ES_RGMII_CTL_REG_P0DUP_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0DUP) >> 1) & 0x1) +#define LTQ_ES_RGMII_CTL_REG_P0DUP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0DUP) | (((val) & 0x1) << 1)) +/* Port 0 Flow Control Enable (0) */ +#define LTQ_ES_RGMII_CTL_REG_P0FCE (0x1) +#define LTQ_ES_RGMII_CTL_REG_P0FCE_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_RGMII_CTL_REG_P0FCE_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0FCE) >> 0) & 0x1) +#define LTQ_ES_RGMII_CTL_REG_P0FCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0FCE) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * 802.1p Priority Map Register + ******************************************************************************/ + +/* Priority Queue 7 (15:14) */ +#define LTQ_ES_PRT_1P_REG_1PPQ7 (0x3 << 14) +#define LTQ_ES_PRT_1P_REG_1PPQ7_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_PRT_1P_REG_1PPQ7_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ7) >> 14) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ7) | (((val) & 0x3) << 14)) +/* Priority Queue 6 (13:12) */ +#define LTQ_ES_PRT_1P_REG_1PPQ6 (0x3 << 12) +#define LTQ_ES_PRT_1P_REG_1PPQ6_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_PRT_1P_REG_1PPQ6_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ6) >> 12) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ6) | (((val) & 0x3) << 12)) +/* Priority Queue 5 (11:10) */ +#define LTQ_ES_PRT_1P_REG_1PPQ5 (0x3 << 10) +#define LTQ_ES_PRT_1P_REG_1PPQ5_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_PRT_1P_REG_1PPQ5_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ5) >> 10) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ5) | (((val) & 0x3) << 10)) +/* Priority Queue 4 (9:8) */ +#define LTQ_ES_PRT_1P_REG_1PPQ4 (0x3 << 8) +#define LTQ_ES_PRT_1P_REG_1PPQ4_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_PRT_1P_REG_1PPQ4_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ4) >> 8) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ4) | (((val) & 0x3) << 8)) +/* Priority Queue 3 (7:6) */ +#define LTQ_ES_PRT_1P_REG_1PPQ3 (0x3 << 6) +#define LTQ_ES_PRT_1P_REG_1PPQ3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_PRT_1P_REG_1PPQ3_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ3) >> 6) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ3) | (((val) & 0x3) << 6)) +/* Priority Queue 2 (5:4) */ +#define LTQ_ES_PRT_1P_REG_1PPQ2 (0x3 << 4) +#define LTQ_ES_PRT_1P_REG_1PPQ2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_PRT_1P_REG_1PPQ2_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ2) >> 4) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ2) | (((val) & 0x3) << 4)) +/* Priority Queue 1 (3:2) */ +#define LTQ_ES_PRT_1P_REG_1PPQ1 (0x3 << 2) +#define LTQ_ES_PRT_1P_REG_1PPQ1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_PRT_1P_REG_1PPQ1_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ1) >> 2) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ1) | (((val) & 0x3) << 2)) +/* Priority Queue 0 (1:0) */ +#define LTQ_ES_PRT_1P_REG_1PPQ0 (0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_PRT_1P_REG_1PPQ0_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ0) >> 0) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * Global Bucket Size Base counter + ******************************************************************************/ + +/* Reserved (31:18) */ +#define LTQ_ES_GBKT_SZBS_REG_REV (0x3fff << 18) +#define LTQ_ES_GBKT_SZBS_REG_REV_GET(val) ((((val) & LTQ_ES_GBKT_SZBS_REG_REV) >> 18) & 0x3fff) +/* Base[17:0] (17:0) */ +#define LTQ_ES_GBKT_SZBS_REG_BASE17_0 (0x3ffff) +#define LTQ_ES_GBKT_SZBS_REG_BASE17_0_VAL(val) (((val) & 0x3ffff) << 0) +#define LTQ_ES_GBKT_SZBS_REG_BASE17_0_GET(val) ((((val) & LTQ_ES_GBKT_SZBS_REG_BASE17_0) >> 0) & 0x3ffff) +#define LTQ_ES_GBKT_SZBS_REG_BASE17_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_GBKT_SZBS_REG_BASE17_0) | (((val) & 0x3ffff) << 0)) + +/******************************************************************************* + * Global Bucket Size Extend Base Counter + ******************************************************************************/ + +/* Reserved (31:18) */ +#define LTQ_ES_GBKT_SZEBS_REG_REV (0x3fff << 18) +#define LTQ_ES_GBKT_SZEBS_REG_REV_GET(val) ((((val) & LTQ_ES_GBKT_SZEBS_REG_REV) >> 18) & 0x3fff) +/* Extend Base[17:0] (17:0) */ +#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0 (0x3ffff) +#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0_VAL(val) (((val) & 0x3ffff) << 0) +#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0_GET(val) ((((val) & LTQ_ES_GBKT_SZEBS_REG_EBASE17_0) >> 0) & 0x3ffff) +#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_GBKT_SZEBS_REG_EBASE17_0) | (((val) & 0x3ffff) << 0)) + +/******************************************************************************* + * Buffer Threshold Register + ******************************************************************************/ + +/* Port Unfull Offset 3 (31:30) */ +#define LTQ_ES_BF_TH_REG_PUO3 (0x3 << 30) +#define LTQ_ES_BF_TH_REG_PUO3_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_BF_TH_REG_PUO3_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO3) >> 30) & 0x3) +#define LTQ_ES_BF_TH_REG_PUO3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO3) | (((val) & 0x3) << 30)) +/* Port Unfull Offset 2 (29:28) */ +#define LTQ_ES_BF_TH_REG_PUO2 (0x3 << 28) +#define LTQ_ES_BF_TH_REG_PUO2_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_BF_TH_REG_PUO2_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO2) >> 28) & 0x3) +#define LTQ_ES_BF_TH_REG_PUO2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO2) | (((val) & 0x3) << 28)) +/* Port Unfull Offset 1 (27:26) */ +#define LTQ_ES_BF_TH_REG_PUO1 (0x3 << 26) +#define LTQ_ES_BF_TH_REG_PUO1_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_BF_TH_REG_PUO1_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO1) >> 26) & 0x3) +#define LTQ_ES_BF_TH_REG_PUO1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO1) | (((val) & 0x3) << 26)) +/* Port Unfull Offset 0 (25:24) */ +#define LTQ_ES_BF_TH_REG_PUO0 (0x3 << 24) +#define LTQ_ES_BF_TH_REG_PUO0_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_BF_TH_REG_PUO0_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO0) >> 24) & 0x3) +#define LTQ_ES_BF_TH_REG_PUO0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO0) | (((val) & 0x3) << 24)) +/* Port Full Offset 3 (23:22) */ +#define LTQ_ES_BF_TH_REG_PFO3 (0x3 << 22) +#define LTQ_ES_BF_TH_REG_PFO3_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_BF_TH_REG_PFO3_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO3) >> 22) & 0x3) +#define LTQ_ES_BF_TH_REG_PFO3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO3) | (((val) & 0x3) << 22)) +/* Port Full Offset 2 (21:20) */ +#define LTQ_ES_BF_TH_REG_PFO2 (0x3 << 20) +#define LTQ_ES_BF_TH_REG_PFO2_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_BF_TH_REG_PFO2_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO2) >> 20) & 0x3) +#define LTQ_ES_BF_TH_REG_PFO2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO2) | (((val) & 0x3) << 20)) +/* Port Full Offset 1 (19:18) */ +#define LTQ_ES_BF_TH_REG_PFO1 (0x3 << 18) +#define LTQ_ES_BF_TH_REG_PFO1_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_BF_TH_REG_PFO1_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO1) >> 18) & 0x3) +#define LTQ_ES_BF_TH_REG_PFO1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO1) | (((val) & 0x3) << 18)) +/* Port Full Offset 0 (17:16) */ +#define LTQ_ES_BF_TH_REG_PFO0 (0x3 << 16) +#define LTQ_ES_BF_TH_REG_PFO0_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_BF_TH_REG_PFO0_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO0) >> 16) & 0x3) +#define LTQ_ES_BF_TH_REG_PFO0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO0) | (((val) & 0x3) << 16)) +/* Reserved (15:14) */ +#define LTQ_ES_BF_TH_REG_RES (0x3 << 14) +#define LTQ_ES_BF_TH_REG_RES_GET(val) ((((val) & LTQ_ES_BF_TH_REG_RES) >> 14) & 0x3) +/* Total Low Add (13) */ +#define LTQ_ES_BF_TH_REG_TLA (0x1 << 13) +#define LTQ_ES_BF_TH_REG_TLA_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_BF_TH_REG_TLA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_TLA) >> 13) & 0x1) +#define LTQ_ES_BF_TH_REG_TLA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_TLA) | (((val) & 0x1) << 13)) +/* Total High Add (12) */ +#define LTQ_ES_BF_TH_REG_THA (0x1 << 12) +#define LTQ_ES_BF_TH_REG_THA_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_BF_TH_REG_THA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_THA) >> 12) & 0x1) +#define LTQ_ES_BF_TH_REG_THA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_THA) | (((val) & 0x1) << 12)) +/* Total Low Offset (11:10) */ +#define LTQ_ES_BF_TH_REG_TLO (0x3 << 10) +#define LTQ_ES_BF_TH_REG_TLO_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_BF_TH_REG_TLO_GET(val) ((((val) & LTQ_ES_BF_TH_REG_TLO) >> 10) & 0x3) +#define LTQ_ES_BF_TH_REG_TLO_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_TLO) | (((val) & 0x3) << 10)) +/* Total High Offset (9:8) */ +#define LTQ_ES_BF_TH_REG_THO (0x3 << 8) +#define LTQ_ES_BF_TH_REG_THO_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_BF_TH_REG_THO_GET(val) ((((val) & LTQ_ES_BF_TH_REG_THO) >> 8) & 0x3) +#define LTQ_ES_BF_TH_REG_THO_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_THO) | (((val) & 0x3) << 8)) +/* Port Unfull Add (7:4) */ +#define LTQ_ES_BF_TH_REG_PUA (0xf << 4) +#define LTQ_ES_BF_TH_REG_PUA_VAL(val) (((val) & 0xf) << 4) +#define LTQ_ES_BF_TH_REG_PUA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUA) >> 4) & 0xf) +#define LTQ_ES_BF_TH_REG_PUA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUA) | (((val) & 0xf) << 4)) +/* Port Full Add (3:0) */ +#define LTQ_ES_BF_TH_REG_PFA (0xf) +#define LTQ_ES_BF_TH_REG_PFA_VAL(val) (((val) & 0xf) << 0) +#define LTQ_ES_BF_TH_REG_PFA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFA) >> 0) & 0xf) +#define LTQ_ES_BF_TH_REG_PFA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFA) | (((val) & 0xf) << 0)) + +/******************************************************************************* + * PMAC Header Control Register + ******************************************************************************/ + +/* Reserved (31:22) */ +#define LTQ_ES_PMAC_HD_CTL_RES (0x3ff << 22) +#define LTQ_ES_PMAC_HD_CTL_RES_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_RES) >> 22) & 0x3ff) +/* Remove Layer-2 Header from Packets Going from PMAC to DMA (21) */ +#define LTQ_ES_PMAC_HD_CTL_RL2 (0x1 << 21) +#define LTQ_ES_PMAC_HD_CTL_RL2_VAL(val) (((val) & 0x1) << 21) +#define LTQ_ES_PMAC_HD_CTL_RL2_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_RL2) >> 21) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_RL2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_RL2) | (((val) & 0x1) << 21)) +/* Remove CRC from Packets Going from PMAC to DMA (20) */ +#define LTQ_ES_PMAC_HD_CTL_RC (0x1 << 20) +#define LTQ_ES_PMAC_HD_CTL_RC_VAL(val) (((val) & 0x1) << 20) +#define LTQ_ES_PMAC_HD_CTL_RC_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_RC) >> 20) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_RC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_RC) | (((val) & 0x1) << 20)) +/* Status Header for Packets from PMAC to DMA (19) */ +#define LTQ_ES_PMAC_HD_CTL_AS (0x1 << 19) +#define LTQ_ES_PMAC_HD_CTL_AS_VAL(val) (((val) & 0x1) << 19) +#define LTQ_ES_PMAC_HD_CTL_AS_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_AS) >> 19) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_AS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_AS) | (((val) & 0x1) << 19)) +/* Add CRC for packets from DMA to PMAC (18) */ +#define LTQ_ES_PMAC_HD_CTL_AC (0x1 << 18) +#define LTQ_ES_PMAC_HD_CTL_AC_VAL(val) (((val) & 0x1) << 18) +#define LTQ_ES_PMAC_HD_CTL_AC_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_AC) >> 18) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_AC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_AC) | (((val) & 0x1) << 18)) +/* Contains the length/type value to the added to packets from DMA to PMAC (17:2) */ +#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN (0xffff << 2) +#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN_VAL(val) (((val) & 0xffff) << 2) +#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_TYPE_LEN) >> 2) & 0xffff) +#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_TYPE_LEN) | (((val) & 0xffff) << 2)) +/* Add TAG to Packets from DMA to PMAC (1) */ +#define LTQ_ES_PMAC_HD_CTL_TAG (0x1 << 1) +#define LTQ_ES_PMAC_HD_CTL_TAG_VAL(val) (((val) & 0x1) << 1) +#define LTQ_ES_PMAC_HD_CTL_TAG_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_TAG) >> 1) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_TAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_TAG) | (((val) & 0x1) << 1)) +/* ADD Header to Packets from DMA to PMAC (0) */ +#define LTQ_ES_PMAC_HD_CTL_ADD (0x1) +#define LTQ_ES_PMAC_HD_CTL_ADD_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_PMAC_HD_CTL_ADD_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_ADD) >> 0) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_ADD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_ADD) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PMAC Source Address Register 1 + ******************************************************************************/ + +/* Source Address to be inserted as a part of the Ethernet header. (15:0) */ +#define LTQ_ES_PMAC_SA1_SA_47_32 (0xffff) +#define LTQ_ES_PMAC_SA1_SA_47_32_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_PMAC_SA1_SA_47_32_GET(val) ((((val) & LTQ_ES_PMAC_SA1_SA_47_32) >> 0) & 0xffff) +#define LTQ_ES_PMAC_SA1_SA_47_32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_SA1_SA_47_32) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * PMAC Source Address Register 2 + ******************************************************************************/ + +/* Source Address (31:0) */ +#define LTQ_ES_PMAC_SA2_SA_31_0 (0xFFFFFFFFL) +#define LTQ_ES_PMAC_SA2_SA_31_0_VAL(val) (((val) & 0xFFFFFFFFL) << 0) +#define LTQ_ES_PMAC_SA2_SA_31_0_GET(val) ((((val) & LTQ_ES_PMAC_SA2_SA_31_0) >> 0) & 0xFFFFFFFFL) +#define LTQ_ES_PMAC_SA2_SA_31_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_SA2_SA_31_0) | (((val) & 0xFFFFFFFFL) << 0)) + +/******************************************************************************* + * PMAC Destination Address Register 1 + ******************************************************************************/ + +/* Destination Address (15:0) */ +#define LTQ_ES_PMAC_DA1_DA_47_32 (0xffff) +#define LTQ_ES_PMAC_DA1_DA_47_32_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_PMAC_DA1_DA_47_32_GET(val) ((((val) & LTQ_ES_PMAC_DA1_DA_47_32) >> 0) & 0xffff) +#define LTQ_ES_PMAC_DA1_DA_47_32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_DA1_DA_47_32) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * PMAC Destination Address Register 2 + ******************************************************************************/ + +/* Destination Address to be inserted as a part of the Ethernet header. (31:0) */ +#define LTQ_ES_PMAC_DA2_DA_31_0 (0xFFFFFFFFL) +#define LTQ_ES_PMAC_DA2_DA_31_0_VAL(val) (((val) & 0xFFFFFFFFL) << 0) +#define LTQ_ES_PMAC_DA2_DA_31_0_GET(val) ((((val) & LTQ_ES_PMAC_DA2_DA_31_0) >> 0) & 0xFFFFFFFFL) +#define LTQ_ES_PMAC_DA2_DA_31_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_DA2_DA_31_0) | (((val) & 0xFFFFFFFFL) << 0)) + +/******************************************************************************* + * PMAC VLAN Register + ******************************************************************************/ + +/* Priority to be inserted as a part of VLAN tag (15:13) */ +#define LTQ_ES_PMAC_VLAN_PRI (0x7 << 13) +#define LTQ_ES_PMAC_VLAN_PRI_VAL(val) (((val) & 0x7) << 13) +#define LTQ_ES_PMAC_VLAN_PRI_GET(val) ((((val) & LTQ_ES_PMAC_VLAN_PRI) >> 13) & 0x7) +#define LTQ_ES_PMAC_VLAN_PRI_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_VLAN_PRI) | (((val) & 0x7) << 13)) +/* CFI bit to be inserted as a part of VLAN tag (12) */ +#define LTQ_ES_PMAC_VLAN_CFI (0x1 << 12) +#define LTQ_ES_PMAC_VLAN_CFI_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_PMAC_VLAN_CFI_GET(val) ((((val) & LTQ_ES_PMAC_VLAN_CFI) >> 12) & 0x1) +#define LTQ_ES_PMAC_VLAN_CFI_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_VLAN_CFI) | (((val) & 0x1) << 12)) +/* VLAN ID to be inserted as a part of VLAN tag (11:0) */ +#define LTQ_ES_PMAC_VLAN_VLAN_ID (0xfff) +#define LTQ_ES_PMAC_VLAN_VLAN_ID_VAL(val) (((val) & 0xfff) << 0) +#define LTQ_ES_PMAC_VLAN_VLAN_ID_GET(val) ((((val) & LTQ_ES_PMAC_VLAN_VLAN_ID) >> 0) & 0xfff) +#define LTQ_ES_PMAC_VLAN_VLAN_ID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_VLAN_VLAN ID) | (((val) & 0xfff) << 0)) + +/******************************************************************************* + * PMAC TX IPG Counter Register + ******************************************************************************/ + +/* IPG Counter (7:0) */ +#define LTQ_ES_PMAC_TX_IPG_IPG_CNT (0xff) +#define LTQ_ES_PMAC_TX_IPG_IPG_CNT_VAL(val) (((val) & 0xff) << 0) +#define LTQ_ES_PMAC_TX_IPG_IPG_CNT_GET(val) ((((val) & LTQ_ES_PMAC_TX_IPG_IPG_CNT) >> 0) & 0xff) +#define LTQ_ES_PMAC_TX_IPG_IPG_CNT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_TX_IPG_IPG_CNT) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * PMAC RX IPG Counter Register + ******************************************************************************/ + +/* IPG Counter (7:0) */ +#define LTQ_ES_PMAC_RX_IPG_IPG_CNT (0xff) +#define LTQ_ES_PMAC_RX_IPG_IPG_CNT_VAL(val) (((val) & 0xff) << 0) +#define LTQ_ES_PMAC_RX_IPG_IPG_CNT_GET(val) ((((val) & LTQ_ES_PMAC_RX_IPG_IPG_CNT) >> 0) & 0xff) +#define LTQ_ES_PMAC_RX_IPG_IPG_CNT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_RX_IPG_IPG_CNT) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * Address Table Control 0 Register + ******************************************************************************/ + +/* Address [31:0] (31:0) */ +#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0 (0xFFFFFFFFL) +#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0_VAL(val) (((val) & 0xFFFFFFFFL) << 0) +#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0) >> 0) & 0xFFFFFFFFL) +#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0) | (((val) & 0xFFFFFFFFL) << 0)) + +/******************************************************************************* + * Address Table Control 1 Register + ******************************************************************************/ + +/* Port Map (22:20) */ +#define LTQ_ES_ADR_TB_CTL1_REG_PMAP (0x7 << 20) +#define LTQ_ES_ADR_TB_CTL1_REG_PMAP_VAL(val) (((val) & 0x7) << 20) +#define LTQ_ES_ADR_TB_CTL1_REG_PMAP_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL1_REG_PMAP) >> 20) & 0x7) +#define LTQ_ES_ADR_TB_CTL1_REG_PMAP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL1_REG_PMAP) | (((val) & 0x7) << 20)) +/* FID group (17:16) */ +#define LTQ_ES_ADR_TB_CTL1_REG_FID (0x3 << 16) +#define LTQ_ES_ADR_TB_CTL1_REG_FID_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_ADR_TB_CTL1_REG_FID_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL1_REG_FID) >> 16) & 0x3) +#define LTQ_ES_ADR_TB_CTL1_REG_FID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL1_REG_FID) | (((val) & 0x3) << 16)) +/* Address [47:32] (15:0) */ +#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32 (0xffff) +#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32) >> 0) & 0xffff) +#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * Address Table Control 2 Register + ******************************************************************************/ + +/* Command (22:20) */ +#define LTQ_ES_ADR_TB_CTL2_REG_CMD (0x7 << 20) +#define LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(val) (((val) & 0x7) << 20) +#define LTQ_ES_ADR_TB_CTL2_REG_CMD_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_CMD) >> 20) & 0x7) +#define LTQ_ES_ADR_TB_CTL2_REG_CMD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_CMD) | (((val) & 0x7) << 20)) +/* Access Control (19:16) */ +#define LTQ_ES_ADR_TB_CTL2_REG_AC (0xf << 16) +#define LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(val) (((val) & 0xf) << 16) +#define LTQ_ES_ADR_TB_CTL2_REG_AC_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_AC) >> 16) & 0xf) +#define LTQ_ES_ADR_TB_CTL2_REG_AC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_AC) | (((val) & 0xf) << 16)) +/* Info Type: Static address (12) */ +#define LTQ_ES_ADR_TB_CTL2_REG_INFOT (0x1 << 12) +#define LTQ_ES_ADR_TB_CTL2_REG_INFOT_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_ADR_TB_CTL2_REG_INFOT_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_INFOT) >> 12) & 0x1) +#define LTQ_ES_ADR_TB_CTL2_REG_INFOT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_INFOT) | (((val) & 0x1) << 12)) +/* Info_Ctrl/Age Timer (10:0) */ +#define LTQ_ES_ADR_TB_CTL2_REG_ITAT (0x7ff) +#define LTQ_ES_ADR_TB_CTL2_REG_ITAT_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_ADR_TB_CTL2_REG_ITAT_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_ITAT) >> 0) & 0x7ff) +#define LTQ_ES_ADR_TB_CTL2_REG_ITAT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_ITAT) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Address Table Status 0 Register + ******************************************************************************/ + +/* Address [31:0] (31:0) */ +#define LTQ_ES_ADR_TB_ST0_REG_ADDRS31_0 (0xFFFFFFFFL) +#define LTQ_ES_ADR_TB_ST0_REG_ADDRS31_0_GET(val) ((((val) & LTQ_ES_ADR_TB_ST0_REG_ADDRS31_0) >> 0) & 0xFFFFFFFFL) + +/******************************************************************************* + * Address Table Status 1 Register + ******************************************************************************/ + +/* Port Map (22:20) */ +#define LTQ_ES_ADR_TB_ST1_REG_PMAPS (0x7 << 20) +#define LTQ_ES_ADR_TB_ST1_REG_PMAPS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST1_REG_PMAPS) >> 20) & 0x7) +/* FID group (17:16) */ +#define LTQ_ES_ADR_TB_ST1_REG_FIDS (0x3 << 16) +#define LTQ_ES_ADR_TB_ST1_REG_FIDS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST1_REG_FIDS) >> 16) & 0x3) +/* Address [47:32] (15:0) */ +#define LTQ_ES_ADR_TB_ST1_REG_ADDRS47_32 (0xffff) +#define LTQ_ES_ADR_TB_ST1_REG_ADDRS47_32_GET(val) ((((val) & LTQ_ES_ADR_TB_ST1_REG_ADDRS47_32) >> 0) & 0xffff) + +/******************************************************************************* + * Address Table Status 2 Register + ******************************************************************************/ + +/* Busy (31) */ +#define LTQ_ES_ADR_TB_ST2_REG_BUSY (0x1 << 31) +#define LTQ_ES_ADR_TB_ST2_REG_BUSY_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_BUSY) >> 31) & 0x1) +/* Result (30:28) */ +#define LTQ_ES_ADR_TB_ST2_REG_RSLT (0x7 << 28) +#define LTQ_ES_ADR_TB_ST2_REG_RSLT_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_RSLT) >> 28) & 0x7) +/* Command (22:20) */ +#define LTQ_ES_ADR_TB_ST2_REG_CMD (0x7 << 20) +#define LTQ_ES_ADR_TB_ST2_REG_CMD_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_CMD) >> 20) & 0x7) +/* Access Control (19:16) */ +#define LTQ_ES_ADR_TB_ST2_REG_AC (0xf << 16) +#define LTQ_ES_ADR_TB_ST2_REG_AC_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_AC) >> 16) & 0xf) +/* Bad Status (14) */ +#define LTQ_ES_ADR_TB_ST2_REG_BAD (0x1 << 14) +#define LTQ_ES_ADR_TB_ST2_REG_BAD_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_BAD) >> 14) & 0x1) +/* Occupy (13) */ +#define LTQ_ES_ADR_TB_ST2_REG_OCP (0x1 << 13) +#define LTQ_ES_ADR_TB_ST2_REG_OCP_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_OCP) >> 13) & 0x1) +/* Info Type: Static address (12) */ +#define LTQ_ES_ADR_TB_ST2_REG_INFOTS (0x1 << 12) +#define LTQ_ES_ADR_TB_ST2_REG_INFOTS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_INFOTS) >> 12) & 0x1) +/* Info_Ctrl/Age Timer Status (10:0) */ +#define LTQ_ES_ADR_TB_ST2_REG_ITATS (0x7ff) +#define LTQ_ES_ADR_TB_ST2_REG_ITATS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_ITATS) >> 0) & 0x7ff) + +/******************************************************************************* + * RMON Counter Control Register + ******************************************************************************/ + +/* Reserved (31:12) */ +#define LTQ_ES_RMON_CTL_REG_RES (0xfffff << 12) +#define LTQ_ES_RMON_CTL_REG_RES_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_RES) >> 12) & 0xfffff) +/* Busy/Access Start (11) */ +#define LTQ_ES_RMON_CTL_REG_BAS (0x1 << 11) +#define LTQ_ES_RMON_CTL_REG_BAS_VAL(val) (((val) & 0x1) << 11) +#define LTQ_ES_RMON_CTL_REG_BAS_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_BAS) >> 11) & 0x1) +#define LTQ_ES_RMON_CTL_REG_BAS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_BAS) | (((val) & 0x1) << 11)) +/* Command for access counter (10:9) */ +#define LTQ_ES_RMON_CTL_REG_CAC (0x3 << 9) +#define LTQ_ES_RMON_CTL_REG_CAC_VAL(val) (((val) & 0x3) << 9) +#define LTQ_ES_RMON_CTL_REG_CAC_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_CAC) >> 9) & 0x3) +#define LTQ_ES_RMON_CTL_REG_CAC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_CAC) | (((val) & 0x3) << 9)) +/* Port (8:6) */ +#define LTQ_ES_RMON_CTL_REG_PORTC (0x7 << 6) +#define LTQ_ES_RMON_CTL_REG_PORTC_VAL(val) (((val) & 0x7) << 6) +#define LTQ_ES_RMON_CTL_REG_PORTC_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_PORTC) >> 6) & 0x7) +#define LTQ_ES_RMON_CTL_REG_PORTC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_PORTC) | (((val) & 0x7) << 6)) +/* Counter Offset (5:0) */ +#define LTQ_ES_RMON_CTL_REG_OFFSET (0x3f) +#define LTQ_ES_RMON_CTL_REG_OFFSET_VAL(val) (((val) & 0x3f) << 0) +#define LTQ_ES_RMON_CTL_REG_OFFSET_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_OFFSET) >> 0) & 0x3f) +#define LTQ_ES_RMON_CTL_REG_OFFSET_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_OFFSET) | (((val) & 0x3f) << 0)) + +/******************************************************************************* + * RMON Counter Status Register + ******************************************************************************/ + +/* Counter [31:0] or Counter[63:32] for byte count (31:0) */ +#define LTQ_ES_RMON_ST_REG_COUNTER (0xFFFFFFFFL) +#define LTQ_ES_RMON_ST_REG_COUNTER_GET(val) ((((val) & LTQ_ES_RMON_ST_REG_COUNTER) >> 0) & 0xFFFFFFFFL) + +/******************************************************************************* + * MDIO Indirect Access Control + ******************************************************************************/ + +/* The Write Data to the MDIO register (31:16) */ +#define LTQ_ES_MDIO_CTL_REG_WD (0xffff << 16) +#define LTQ_ES_MDIO_CTL_REG_WD_VAL(val) (((val) & 0xffff) << 16) +#define LTQ_ES_MDIO_CTL_REG_WD_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_WD) >> 16) & 0xffff) +#define LTQ_ES_MDIO_CTL_REG_WD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_WD) | (((val) & 0xffff) << 16)) +/* Busy state (15) */ +#define LTQ_ES_MDIO_CTL_REG_MBUSY (0x1 << 15) +#define LTQ_ES_MDIO_CTL_REG_MBUSY_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_MDIO_CTL_REG_MBUSY_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_MBUSY) >> 15) & 0x1) +#define LTQ_ES_MDIO_CTL_REG_MBUSY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_MBUSY) | (((val) & 0x1) << 15)) +/* Reserved (14:12) */ +#define LTQ_ES_MDIO_CTL_REG_RES (0x7 << 12) +#define LTQ_ES_MDIO_CTL_REG_RES_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_RES) >> 12) & 0x7) +/* Operation Code (11:10) */ +#define LTQ_ES_MDIO_CTL_REG_OP (0x3 << 10) +#define LTQ_ES_MDIO_CTL_REG_OP_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_MDIO_CTL_REG_OP_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_OP) >> 10) & 0x3) +#define LTQ_ES_MDIO_CTL_REG_OP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_OP) | (((val) & 0x3) << 10)) +/* PHY Address (9:5) */ +#define LTQ_ES_MDIO_CTL_REG_PHYAD (0x1f << 5) +#define LTQ_ES_MDIO_CTL_REG_PHYAD_VAL(val) (((val) & 0x1f) << 5) +#define LTQ_ES_MDIO_CTL_REG_PHYAD_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_PHYAD) >> 5) & 0x1f) +#define LTQ_ES_MDIO_CTL_REG_PHYAD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_PHYAD) | (((val) & 0x1f) << 5)) +/* Register Address (4:0) */ +#define LTQ_ES_MDIO_CTL_REG_REGAD (0x1f) +#define LTQ_ES_MDIO_CTL_REG_REGAD_VAL(val) (((val) & 0x1f) << 0) +#define LTQ_ES_MDIO_CTL_REG_REGAD_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_REGAD) >> 0) & 0x1f) +#define LTQ_ES_MDIO_CTL_REG_REGAD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_REGAD) | (((val) & 0x1f) << 0)) + +/******************************************************************************* + * MDIO Indirect Read Data + ******************************************************************************/ + +/* Reserved (31:16) */ +#define LTQ_ES_MDIO_DATA_REG_RES (0xffff << 16) +#define LTQ_ES_MDIO_DATA_REG_RES_GET(val) ((((val) & LTQ_ES_MDIO_DATA_REG_RES) >> 16) & 0xffff) +/* The Read Data (15:0) */ +#define LTQ_ES_MDIO_DATA_REG_RD (0xffff) +#define LTQ_ES_MDIO_DATA_REG_RD_GET(val) ((((val) & LTQ_ES_MDIO_DATA_REG_RD) >> 0) & 0xffff) + +/******************************************************************************* + * Type Filter Action + ******************************************************************************/ + +/* Destination Queue for Type Filter 7 (31:30) */ +#define LTQ_ES_TP_FLT_ACT_REG_QATF7 (0x3 << 30) +#define LTQ_ES_TP_FLT_ACT_REG_QATF7_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_TP_FLT_ACT_REG_QATF7_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QATF7) >> 30) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QATF7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QATF7) | (((val) & 0x3) << 30)) +/* Destination Queue for Type Filter 6 (29:28) */ +#define LTQ_ES_TP_FLT_ACT_REG_QATF6 (0x3 << 28) +#define LTQ_ES_TP_FLT_ACT_REG_QATF6_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_TP_FLT_ACT_REG_QATF6_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QATF6) >> 28) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QATF6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QATF6) | (((val) & 0x3) << 28)) +/* Destination Queue for Type Filter 5 (27:26) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF5 (0x3 << 26) +#define LTQ_ES_TP_FLT_ACT_REG_QTF5_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_TP_FLT_ACT_REG_QTF5_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF5) >> 26) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF5) | (((val) & 0x3) << 26)) +/* Destination Queue for Type Filter 4 (25:24) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF4 (0x3 << 24) +#define LTQ_ES_TP_FLT_ACT_REG_QTF4_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_TP_FLT_ACT_REG_QTF4_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF4) >> 24) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF4) | (((val) & 0x3) << 24)) +/* Destination Queue for Type Filter 3 (23:22) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF3 (0x3 << 22) +#define LTQ_ES_TP_FLT_ACT_REG_QTF3_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_TP_FLT_ACT_REG_QTF3_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF3) >> 22) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF3) | (((val) & 0x3) << 22)) +/* Destination Queue for Type Filter 2 (21:20) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF2 (0x3 << 20) +#define LTQ_ES_TP_FLT_ACT_REG_QTF2_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_TP_FLT_ACT_REG_QTF2_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF2) >> 20) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF2) | (((val) & 0x3) << 20)) +/* Destination Queue for Type Filter 1 (19:18) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF1 (0x3 << 18) +#define LTQ_ES_TP_FLT_ACT_REG_QTF1_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_TP_FLT_ACT_REG_QTF1_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF1) >> 18) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF1) | (((val) & 0x3) << 18)) +/* Destination Queue for Type Filter 0 (17:16) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF0 (0x3 << 16) +#define LTQ_ES_TP_FLT_ACT_REG_QTF0_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_TP_FLT_ACT_REG_QTF0_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF0) >> 16) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF0) | (((val) & 0x3) << 16)) +/* Action for Type Filter 7 (15:14) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF7 (0x3 << 14) +#define LTQ_ES_TP_FLT_ACT_REG_ATF7_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_TP_FLT_ACT_REG_ATF7_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF7) >> 14) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF7) | (((val) & 0x3) << 14)) +/* Action for Type Filter 6 (13:12) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF6 (0x3 << 12) +#define LTQ_ES_TP_FLT_ACT_REG_ATF6_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_TP_FLT_ACT_REG_ATF6_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF6) >> 12) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF6) | (((val) & 0x3) << 12)) +/* Action for Type Filter 5 (11:10) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF5 (0x3 << 10) +#define LTQ_ES_TP_FLT_ACT_REG_ATF5_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_TP_FLT_ACT_REG_ATF5_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF5) >> 10) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF5) | (((val) & 0x3) << 10)) +/* Action for Type Filter 4 (9:8) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF4 (0x3 << 8) +#define LTQ_ES_TP_FLT_ACT_REG_ATF4_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_TP_FLT_ACT_REG_ATF4_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF4) >> 8) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF4) | (((val) & 0x3) << 8)) +/* Action for Type Filter 3 (7:6) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF3 (0x3 << 6) +#define LTQ_ES_TP_FLT_ACT_REG_ATF3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_TP_FLT_ACT_REG_ATF3_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF3) >> 6) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF3) | (((val) & 0x3) << 6)) +/* Action for Type Filter 2 (5:4) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF2 (0x3 << 4) +#define LTQ_ES_TP_FLT_ACT_REG_ATF2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_TP_FLT_ACT_REG_ATF2_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF2) >> 4) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF2) | (((val) & 0x3) << 4)) +/* Action for Type Filter 1 (3:2) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF1 (0x3 << 2) +#define LTQ_ES_TP_FLT_ACT_REG_ATF1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_TP_FLT_ACT_REG_ATF1_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF1) >> 2) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF1) | (((val) & 0x3) << 2)) +/* Action for Type Filter 0 (1:0) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF0 (0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_TP_FLT_ACT_REG_ATF0_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF0) >> 0) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * Protocol Filter Action + ******************************************************************************/ + +/* Action for Protocol Filter 7 (15:14) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7 (0x3 << 14) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF7) >> 14) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF7) | (((val) & 0x3) << 14)) +/* Action for Protocol Filter 6 (13:12) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6 (0x3 << 12) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF6) >> 12) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF6) | (((val) & 0x3) << 12)) +/* Action for Protocol Filter 5 (11:10) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5 (0x3 << 10) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF5) >> 10) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF5) | (((val) & 0x3) << 10)) +/* Action for Protocol Filter 4 (9:8) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4 (0x3 << 8) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF4) >> 8) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF4) | (((val) & 0x3) << 8)) +/* Action for Protocol Filter 3 (7:6) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3 (0x3 << 6) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF3) >> 6) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF3) | (((val) & 0x3) << 6)) +/* Action for Protocol Filter 2 (5:4) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2 (0x3 << 4) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF2) >> 4) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF2) | (((val) & 0x3) << 4)) +/* Action for Protocol Filter 1 (3:2) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1 (0x3 << 2) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF1) >> 2) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF1) | (((val) & 0x3) << 2)) +/* Action for Protocol Filter 0 (1:0) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0 (0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF0) >> 0) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * VLAN Filter 0 + ******************************************************************************/ + +/* Res (31:24) */ +#define LTQ_ES_VLAN_FLT0_REG_RES (0xff << 24) +#define LTQ_ES_VLAN_FLT0_REG_RES_VAL(val) (((val) & 0xff) << 24) +#define LTQ_ES_VLAN_FLT0_REG_RES_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_RES) >> 24) & 0xff) +#define LTQ_ES_VLAN_FLT0_REG_RES_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_RES) | (((val) & 0xff) << 24)) +/* FID (23:22) */ +#define LTQ_ES_VLAN_FLT0_REG_FID (0x3 << 22) +#define LTQ_ES_VLAN_FLT0_REG_FID_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_VLAN_FLT0_REG_FID_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_FID) >> 22) & 0x3) +#define LTQ_ES_VLAN_FLT0_REG_FID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_FID) | (((val) & 0x3) << 22)) +/* Tagged Member (21:19) */ +#define LTQ_ES_VLAN_FLT0_REG_TM (0x7 << 19) +#define LTQ_ES_VLAN_FLT0_REG_TM_VAL(val) (((val) & 0x7) << 19) +#define LTQ_ES_VLAN_FLT0_REG_TM_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_TM) >> 19) & 0x7) +#define LTQ_ES_VLAN_FLT0_REG_TM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_TM) | (((val) & 0x7) << 19)) +/* Member (18:16) */ +#define LTQ_ES_VLAN_FLT0_REG_M (0x7 << 16) +#define LTQ_ES_VLAN_FLT0_REG_M_VAL(val) (((val) & 0x7) << 16) +#define LTQ_ES_VLAN_FLT0_REG_M_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_M) >> 16) & 0x7) +#define LTQ_ES_VLAN_FLT0_REG_M_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_M) | (((val) & 0x7) << 16)) +/* VLAN_Valid (15) */ +#define LTQ_ES_VLAN_FLT0_REG_VV (0x1 << 15) +#define LTQ_ES_VLAN_FLT0_REG_VV_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_VLAN_FLT0_REG_VV_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_VV) >> 15) & 0x1) +#define LTQ_ES_VLAN_FLT0_REG_VV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_VV) | (((val) & 0x1) << 15)) +/* VLAN PRI (14:12) */ +#define LTQ_ES_VLAN_FLT0_REG_VP (0x7 << 12) +#define LTQ_ES_VLAN_FLT0_REG_VP_VAL(val) (((val) & 0x7) << 12) +#define LTQ_ES_VLAN_FLT0_REG_VP_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_VP) >> 12) & 0x7) +#define LTQ_ES_VLAN_FLT0_REG_VP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_VP) | (((val) & 0x7) << 12)) +/* VID (11:0) */ +#define LTQ_ES_VLAN_FLT0_REG_VID (0xfff) +#define LTQ_ES_VLAN_FLT0_REG_VID_VAL(val) (((val) & 0xfff) << 0) +#define LTQ_ES_VLAN_FLT0_REG_VID_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_VID) >> 0) & 0xfff) +#define LTQ_ES_VLAN_FLT0_REG_VID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_VID) | (((val) & 0xfff) << 0)) + +/******************************************************************************* + * Type Filter 10 + ******************************************************************************/ + +/* Value 1 Compared with Ether-Type (31:16) */ +#define LTQ_ES_TP_FLT10_REG_VCET1 (0xffff << 16) +#define LTQ_ES_TP_FLT10_REG_VCET1_VAL(val) (((val) & 0xffff) << 16) +#define LTQ_ES_TP_FLT10_REG_VCET1_GET(val) ((((val) & LTQ_ES_TP_FLT10_REG_VCET1) >> 16) & 0xffff) +#define LTQ_ES_TP_FLT10_REG_VCET1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT10_REG_VCET1) | (((val) & 0xffff) << 16)) +/* Value 0 Compared with Ether-Type (15:0) */ +#define LTQ_ES_TP_FLT10_REG_VCET0 (0xffff) +#define LTQ_ES_TP_FLT10_REG_VCET0_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_TP_FLT10_REG_VCET0_GET(val) ((((val) & LTQ_ES_TP_FLT10_REG_VCET0) >> 0) & 0xffff) +#define LTQ_ES_TP_FLT10_REG_VCET0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT10_REG_VCET0) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * DiffServMapping 0 + ******************************************************************************/ + +/* Priority Queue F (31:30) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQF (0x3 << 30) +#define LTQ_ES_DFSRV_MAP0_REG_PQF_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_DFSRV_MAP0_REG_PQF_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQF) >> 30) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQF_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQF) | (((val) & 0x3) << 30)) +/* Priority Queue E (29:28) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQE (0x3 << 28) +#define LTQ_ES_DFSRV_MAP0_REG_PQE_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_DFSRV_MAP0_REG_PQE_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQE) >> 28) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQE) | (((val) & 0x3) << 28)) +/* Priority Queue D (27:26) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQD (0x3 << 26) +#define LTQ_ES_DFSRV_MAP0_REG_PQD_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_DFSRV_MAP0_REG_PQD_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQD) >> 26) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQD) | (((val) & 0x3) << 26)) +/* Priority Queue C (25:24) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQC (0x3 << 24) +#define LTQ_ES_DFSRV_MAP0_REG_PQC_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_DFSRV_MAP0_REG_PQC_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQC) >> 24) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQC) | (((val) & 0x3) << 24)) +/* Priority Queue B (23:22) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQB (0x3 << 22) +#define LTQ_ES_DFSRV_MAP0_REG_PQB_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_DFSRV_MAP0_REG_PQB_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQB) >> 22) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQB_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQB) | (((val) & 0x3) << 22)) +/* Priority Queue A (21:20) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQA (0x3 << 20) +#define LTQ_ES_DFSRV_MAP0_REG_PQA_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_DFSRV_MAP0_REG_PQA_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQA) >> 20) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQA) | (((val) & 0x3) << 20)) +/* Priority Queue 9 (19:18) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ9 (0x3 << 18) +#define LTQ_ES_DFSRV_MAP0_REG_PQ9_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_DFSRV_MAP0_REG_PQ9_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ9) >> 18) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ9_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ9) | (((val) & 0x3) << 18)) +/* Priority Queue 8 (17:16) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ8 (0x3 << 16) +#define LTQ_ES_DFSRV_MAP0_REG_PQ8_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_DFSRV_MAP0_REG_PQ8_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ8) >> 16) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ8_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ8) | (((val) & 0x3) << 16)) +/* Priority Queue 7 (15:14) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ7 (0x3 << 14) +#define LTQ_ES_DFSRV_MAP0_REG_PQ7_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_DFSRV_MAP0_REG_PQ7_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ7) >> 14) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ7) | (((val) & 0x3) << 14)) +/* Priority Queue 6 (13:12) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ6 (0x3 << 12) +#define LTQ_ES_DFSRV_MAP0_REG_PQ6_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_DFSRV_MAP0_REG_PQ6_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ6) >> 12) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ6) | (((val) & 0x3) << 12)) +/* Priority Queue 5 (11:10) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ5 (0x3 << 10) +#define LTQ_ES_DFSRV_MAP0_REG_PQ5_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_DFSRV_MAP0_REG_PQ5_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ5) >> 10) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ5) | (((val) & 0x3) << 10)) +/* Priority Queue 4 (9:8) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ4 (0x3 << 8) +#define LTQ_ES_DFSRV_MAP0_REG_PQ4_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_DFSRV_MAP0_REG_PQ4_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ4) >> 8) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ4) | (((val) & 0x3) << 8)) +/* Priority Queue 3 (7:6) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ3 (0x3 << 6) +#define LTQ_ES_DFSRV_MAP0_REG_PQ3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_DFSRV_MAP0_REG_PQ3_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ3) >> 6) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ3) | (((val) & 0x3) << 6)) +/* Priority Queue 2 (5:4) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ2 (0x3 << 4) +#define LTQ_ES_DFSRV_MAP0_REG_PQ2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_DFSRV_MAP0_REG_PQ2_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ2) >> 4) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ2) | (((val) & 0x3) << 4)) +/* Priority Queue 1 (3:2) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ1 (0x3 << 2) +#define LTQ_ES_DFSRV_MAP0_REG_PQ1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_DFSRV_MAP0_REG_PQ1_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ1) >> 2) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ1) | (((val) & 0x3) << 2)) +/* Priority Queue 0 (1:0) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ0 (0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_DFSRV_MAP0_REG_PQ0_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ0) >> 0) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * DiffServMapping 1 + ******************************************************************************/ + +/* Priority Queue 1F (31:30) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1F (0x3 << 30) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1F_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1F_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1F) >> 30) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1F_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1F) | (((val) & 0x3) << 30)) +/* Priority Queue 1E (29:28) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1E (0x3 << 28) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1E_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1E_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1E) >> 28) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1E_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1E) | (((val) & 0x3) << 28)) +/* Priority Queue 1D (27:26) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1D (0x3 << 26) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1D_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1D_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1D) >> 26) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1D_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1D) | (((val) & 0x3) << 26)) +/* Priority Queue 1C (25:24) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1C (0x3 << 24) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1C_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1C_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1C) >> 24) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1C_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1C) | (((val) & 0x3) << 24)) +/* Priority Queue 1B (23:22) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1B (0x3 << 22) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1B_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1B_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1B) >> 22) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1B) | (((val) & 0x3) << 22)) +/* Priority Queue 1A (21:20) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1A (0x3 << 20) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1A_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1A_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1A) >> 20) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1A_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1A) | (((val) & 0x3) << 20)) +/* Priority Queue 19 (19:18) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ19 (0x3 << 18) +#define LTQ_ES_DFSRV_MAP1_REG_PQ19_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_DFSRV_MAP1_REG_PQ19_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ19) >> 18) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ19_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ19) | (((val) & 0x3) << 18)) +/* Priority Queue 18 (17:16) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ18 (0x3 << 16) +#define LTQ_ES_DFSRV_MAP1_REG_PQ18_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_DFSRV_MAP1_REG_PQ18_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ18) >> 16) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ18_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ18) | (((val) & 0x3) << 16)) +/* Priority Queue 17 (15:14) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ17 (0x3 << 14) +#define LTQ_ES_DFSRV_MAP1_REG_PQ17_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_DFSRV_MAP1_REG_PQ17_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ17) >> 14) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ17_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ17) | (((val) & 0x3) << 14)) +/* Priority Queue 16 (13:12) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ16 (0x3 << 12) +#define LTQ_ES_DFSRV_MAP1_REG_PQ16_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_DFSRV_MAP1_REG_PQ16_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ16) >> 12) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ16_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ16) | (((val) & 0x3) << 12)) +/* Priority Queue 15 (11:10) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ15 (0x3 << 10) +#define LTQ_ES_DFSRV_MAP1_REG_PQ15_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_DFSRV_MAP1_REG_PQ15_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ15) >> 10) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ15_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ15) | (((val) & 0x3) << 10)) +/* Priority Queue 14 (9:8) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ14 (0x3 << 8) +#define LTQ_ES_DFSRV_MAP1_REG_PQ14_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_DFSRV_MAP1_REG_PQ14_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ14) >> 8) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ14_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ14) | (((val) & 0x3) << 8)) +/* Priority Queue 13 (7:6) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ13 (0x3 << 6) +#define LTQ_ES_DFSRV_MAP1_REG_PQ13_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_DFSRV_MAP1_REG_PQ13_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ13) >> 6) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ13_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ13) | (((val) & 0x3) << 6)) +/* Priority Queue 12 (5:4) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ12 (0x3 << 4) +#define LTQ_ES_DFSRV_MAP1_REG_PQ12_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_DFSRV_MAP1_REG_PQ12_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ12) >> 4) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ12_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ12) | (((val) & 0x3) << 4)) +/* Priority Queue 11 (3:2) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ11 (0x3 << 2) +#define LTQ_ES_DFSRV_MAP1_REG_PQ11_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_DFSRV_MAP1_REG_PQ11_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ11) >> 2) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ11_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ11) | (((val) & 0x3) << 2)) +/* Priority Queue 10 (1:0) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ10 (0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ10_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_DFSRV_MAP1_REG_PQ10_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ10) >> 0) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ10_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ10) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * DiffServMapping 2 + ******************************************************************************/ + +/* Priority Queue 2F (31:30) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2F (0x3 << 30) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2F_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2F_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2F) >> 30) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2F_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2F) | (((val) & 0x3) << 30)) +/* Priority Queue 2E (29:28) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2E (0x3 << 28) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2E_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2E_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2E) >> 28) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2E_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2E) | (((val) & 0x3) << 28)) +/* Priority Queue 2D (27:26) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2D (0x3 << 26) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2D_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2D_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2D) >> 26) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2D_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2D) | (((val) & 0x3) << 26)) +/* Priority Queue 2C (25:24) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2C (0x3 << 24) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2C_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2C_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2C) >> 24) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2C_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2C) | (((val) & 0x3) << 24)) +/* Priority Queue 2B (23:22) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2B (0x3 << 22) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2B_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2B_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2B) >> 22) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2B) | (((val) & 0x3) << 22)) +/* Priority Queue 2A (21:20) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2A (0x3 << 20) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2A_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2A_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2A) >> 20) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2A_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2A) | (((val) & 0x3) << 20)) +/* Priority Queue 29 (19:18) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ29 (0x3 << 18) +#define LTQ_ES_DFSRV_MAP2_REG_PQ29_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_DFSRV_MAP2_REG_PQ29_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ29) >> 18) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ29_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ29) | (((val) & 0x3) << 18)) +/* Priority Queue 28 (17:16) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ28 (0x3 << 16) +#define LTQ_ES_DFSRV_MAP2_REG_PQ28_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_DFSRV_MAP2_REG_PQ28_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ28) >> 16) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ28_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ28) | (((val) & 0x3) << 16)) +/* Priority Queue 27 (15:14) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ27 (0x3 << 14) +#define LTQ_ES_DFSRV_MAP2_REG_PQ27_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_DFSRV_MAP2_REG_PQ27_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ27) >> 14) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ27_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ27) | (((val) & 0x3) << 14)) +/* Priority Queue 26 (13:12) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ26 (0x3 << 12) +#define LTQ_ES_DFSRV_MAP2_REG_PQ26_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_DFSRV_MAP2_REG_PQ26_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ26) >> 12) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ26_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ26) | (((val) & 0x3) << 12)) +/* Priority Queue 25 (11:10) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ25 (0x3 << 10) +#define LTQ_ES_DFSRV_MAP2_REG_PQ25_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_DFSRV_MAP2_REG_PQ25_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ25) >> 10) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ25_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ25) | (((val) & 0x3) << 10)) +/* Priority Queue 24 (9:8) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ24 (0x3 << 8) +#define LTQ_ES_DFSRV_MAP2_REG_PQ24_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_DFSRV_MAP2_REG_PQ24_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ24) >> 8) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ24_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ24) | (((val) & 0x3) << 8)) +/* Priority Queue 23 (7:6) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ23 (0x3 << 6) +#define LTQ_ES_DFSRV_MAP2_REG_PQ23_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_DFSRV_MAP2_REG_PQ23_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ23) >> 6) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ23_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ23) | (((val) & 0x3) << 6)) +/* Priority Queue 22 (5:4) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ22 (0x3 << 4) +#define LTQ_ES_DFSRV_MAP2_REG_PQ22_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_DFSRV_MAP2_REG_PQ22_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ22) >> 4) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ22_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ22) | (((val) & 0x3) << 4)) +/* Priority Queue 21 (3:2) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ21 (0x3 << 2) +#define LTQ_ES_DFSRV_MAP2_REG_PQ21_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_DFSRV_MAP2_REG_PQ21_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ21) >> 2) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ21_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ21) | (((val) & 0x3) << 2)) +/* Priority Queue 20 (1:0) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ20 (0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ20_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_DFSRV_MAP2_REG_PQ20_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ20) >> 0) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ20_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ20) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * DiffServMapping 3 + ******************************************************************************/ + +/* Priority Queue 3F (31:30) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3F (0x3 << 30) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3F_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3F_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3F) >> 30) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3F_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3F) | (((val) & 0x3) << 30)) +/* Priority Queue 3E (29:28) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3E (0x3 << 28) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3E_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3E_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3E) >> 28) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3E_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3E) | (((val) & 0x3) << 28)) +/* Priority Queue 3D (27:26) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3D (0x3 << 26) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3D_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3D_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3D) >> 26) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3D_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3D) | (((val) & 0x3) << 26)) +/* Priority Queue 3C (25:24) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3C (0x3 << 24) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3C_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3C_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3C) >> 24) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3C_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3C) | (((val) & 0x3) << 24)) +/* Priority Queue 3B (23:22) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3B (0x3 << 22) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3B_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3B_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3B) >> 22) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3B) | (((val) & 0x3) << 22)) +/* Priority Queue 3A (21:20) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3A (0x3 << 20) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3A_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3A_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3A) >> 20) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3A_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3A) | (((val) & 0x3) << 20)) +/* Priority Queue 39 (19:18) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ39 (0x3 << 18) +#define LTQ_ES_DFSRV_MAP3_REG_PQ39_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_DFSRV_MAP3_REG_PQ39_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ39) >> 18) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ39_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ39) | (((val) & 0x3) << 18)) +/* Priority Queue 38 (17:16) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ38 (0x3 << 16) +#define LTQ_ES_DFSRV_MAP3_REG_PQ38_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_DFSRV_MAP3_REG_PQ38_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ38) >> 16) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ38_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ38) | (((val) & 0x3) << 16)) +/* Priority Queue 37 (15:14) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ37 (0x3 << 14) +#define LTQ_ES_DFSRV_MAP3_REG_PQ37_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_DFSRV_MAP3_REG_PQ37_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ37) >> 14) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ37_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ37) | (((val) & 0x3) << 14)) +/* Priority Queue 36 (13:12) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ36 (0x3 << 12) +#define LTQ_ES_DFSRV_MAP3_REG_PQ36_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_DFSRV_MAP3_REG_PQ36_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ36) >> 12) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ36_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ36) | (((val) & 0x3) << 12)) +/* Priority Queue 35 (11:10) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ35 (0x3 << 10) +#define LTQ_ES_DFSRV_MAP3_REG_PQ35_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_DFSRV_MAP3_REG_PQ35_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ35) >> 10) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ35_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ35) | (((val) & 0x3) << 10)) +/* Priority Queue 34 (9:8) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ34 (0x3 << 8) +#define LTQ_ES_DFSRV_MAP3_REG_PQ34_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_DFSRV_MAP3_REG_PQ34_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ34) >> 8) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ34_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ34) | (((val) & 0x3) << 8)) +/* Priority Queue 33 (7:6) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ33 (0x3 << 6) +#define LTQ_ES_DFSRV_MAP3_REG_PQ33_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_DFSRV_MAP3_REG_PQ33_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ33) >> 6) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ33_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ33) | (((val) & 0x3) << 6)) +/* Priority Queue 32 (5:4) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ32 (0x3 << 4) +#define LTQ_ES_DFSRV_MAP3_REG_PQ32_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_DFSRV_MAP3_REG_PQ32_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ32) >> 4) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ32) | (((val) & 0x3) << 4)) +/* Priority Queue 31 (3:2) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ31 (0x3 << 2) +#define LTQ_ES_DFSRV_MAP3_REG_PQ31_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_DFSRV_MAP3_REG_PQ31_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ31) >> 2) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ31_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ31) | (((val) & 0x3) << 2)) +/* Priority Queue 30 (1:0) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ30 (0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ30_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_DFSRV_MAP3_REG_PQ30_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ30) >> 0) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ30_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ30) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * TCP/UDP Port Filter 0 + ******************************************************************************/ + +/* Reserved (31:30) */ +#define LTQ_ES_TCP_PF0_REG_RES (0x3 << 30) +#define LTQ_ES_TCP_PF0_REG_RES_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_RES) >> 30) & 0x3) +/* Action for TCP/UDP Port Filter 0 (29:28) */ +#define LTQ_ES_TCP_PF0_REG_ATUF0 (0x3 << 28) +#define LTQ_ES_TCP_PF0_REG_ATUF0_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_TCP_PF0_REG_ATUF0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_ATUF0) >> 28) & 0x3) +#define LTQ_ES_TCP_PF0_REG_ATUF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_ATUF0) | (((val) & 0x3) << 28)) +/* TCP/UDP PRI for TCP/UDP Port Filter 0 (27:26) */ +#define LTQ_ES_TCP_PF0_REG_TUPF0 (0x3 << 26) +#define LTQ_ES_TCP_PF0_REG_TUPF0_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_TCP_PF0_REG_TUPF0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_TUPF0) >> 26) & 0x3) +#define LTQ_ES_TCP_PF0_REG_TUPF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_TUPF0) | (((val) & 0x3) << 26)) +/* Compare TCP/UDP Source Port or Destination Port (25:24) */ +#define LTQ_ES_TCP_PF0_REG_COMP0 (0x3 << 24) +#define LTQ_ES_TCP_PF0_REG_COMP0_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_TCP_PF0_REG_COMP0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_COMP0) >> 24) & 0x3) +#define LTQ_ES_TCP_PF0_REG_COMP0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_COMP0) | (((val) & 0x3) << 24)) +/* Port Range in TCP/UDP (23:16) */ +#define LTQ_ES_TCP_PF0_REG_PRANGE0 (0xff << 16) +#define LTQ_ES_TCP_PF0_REG_PRANGE0_VAL(val) (((val) & 0xff) << 16) +#define LTQ_ES_TCP_PF0_REG_PRANGE0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_PRANGE0) >> 16) & 0xff) +#define LTQ_ES_TCP_PF0_REG_PRANGE0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_PRANGE0) | (((val) & 0xff) << 16)) +/* Base Port number 0 (15:0) */ +#define LTQ_ES_TCP_PF0_REG_BASEPT0 (0xffff) +#define LTQ_ES_TCP_PF0_REG_BASEPT0_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_TCP_PF0_REG_BASEPT0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_BASEPT0) >> 0) & 0xffff) +#define LTQ_ES_TCP_PF0_REG_BASEPT0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_BASEPT0) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * Reserved DA(0180C2000003~0180C2000000) control register + ******************************************************************************/ + +/* Valid bit for 0180C2000003 (31) */ +#define LTQ_ES_RA_03_00_REG_RA03_VALID (0x1 << 31) +#define LTQ_ES_RA_03_00_REG_RA03_VALID_VAL(val) (((val) & 0x1) << 31) +#define LTQ_ES_RA_03_00_REG_RA03_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_VALID) >> 31) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA03_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_VALID) | (((val) & 0x1) << 31)) +/* Span bit for 0180C2000003 (30) */ +#define LTQ_ES_RA_03_00_REG_RA03_SPAN (0x1 << 30) +#define LTQ_ES_RA_03_00_REG_RA03_SPAN_VAL(val) (((val) & 0x1) << 30) +#define LTQ_ES_RA_03_00_REG_RA03_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_SPAN) >> 30) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA03_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_SPAN) | (((val) & 0x1) << 30)) +/* Management bit for 0180C2000003 (29) */ +#define LTQ_ES_RA_03_00_REG_RA03_MG (0x1 << 29) +#define LTQ_ES_RA_03_00_REG_RA03_MG_VAL(val) (((val) & 0x1) << 29) +#define LTQ_ES_RA_03_00_REG_RA03_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_MG) >> 29) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA03_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_MG) | (((val) & 0x1) << 29)) +/* Cross_VLAN bit for 0180C2000003 (28) */ +#define LTQ_ES_RA_03_00_REG_RA03_CV (0x1 << 28) +#define LTQ_ES_RA_03_00_REG_RA03_CV_VAL(val) (((val) & 0x1) << 28) +#define LTQ_ES_RA_03_00_REG_RA03_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_CV) >> 28) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA03_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_CV) | (((val) & 0x1) << 28)) +/* TXTAG bit for 0180C2000003 (27:26) */ +#define LTQ_ES_RA_03_00_REG_RA03_TXTAG (0x3 << 26) +#define LTQ_ES_RA_03_00_REG_RA03_TXTAG_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_RA_03_00_REG_RA03_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_TXTAG) >> 26) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA03_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_TXTAG) | (((val) & 0x3) << 26)) +/* Action bit for 0180C2000003 (25:24) */ +#define LTQ_ES_RA_03_00_REG_RA03_ACT (0x3 << 24) +#define LTQ_ES_RA_03_00_REG_RA03_ACT_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_RA_03_00_REG_RA03_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_ACT) >> 24) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA03_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_ACT) | (((val) & 0x3) << 24)) +/* Valid bit for 0180C2000002 (23) */ +#define LTQ_ES_RA_03_00_REG_RA02_VALID (0x1 << 23) +#define LTQ_ES_RA_03_00_REG_RA02_VALID_VAL(val) (((val) & 0x1) << 23) +#define LTQ_ES_RA_03_00_REG_RA02_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_VALID) >> 23) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA02_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_VALID) | (((val) & 0x1) << 23)) +/* Span bit for 0180C2000002 (22) */ +#define LTQ_ES_RA_03_00_REG_RA02_SPAN (0x1 << 22) +#define LTQ_ES_RA_03_00_REG_RA02_SPAN_VAL(val) (((val) & 0x1) << 22) +#define LTQ_ES_RA_03_00_REG_RA02_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_SPAN) >> 22) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA02_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_SPAN) | (((val) & 0x1) << 22)) +/* Management bit for 0180C2000002 (21) */ +#define LTQ_ES_RA_03_00_REG_RA02_MG (0x1 << 21) +#define LTQ_ES_RA_03_00_REG_RA02_MG_VAL(val) (((val) & 0x1) << 21) +#define LTQ_ES_RA_03_00_REG_RA02_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_MG) >> 21) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA02_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_MG) | (((val) & 0x1) << 21)) +/* Cross_VLAN bit for 0180C2000002 (20) */ +#define LTQ_ES_RA_03_00_REG_RA02_CV (0x1 << 20) +#define LTQ_ES_RA_03_00_REG_RA02_CV_VAL(val) (((val) & 0x1) << 20) +#define LTQ_ES_RA_03_00_REG_RA02_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_CV) >> 20) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA02_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_CV) | (((val) & 0x1) << 20)) +/* TXTAG bit for 0180C2000002 (19:18) */ +#define LTQ_ES_RA_03_00_REG_RA02_TXTAG (0x3 << 18) +#define LTQ_ES_RA_03_00_REG_RA02_TXTAG_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_RA_03_00_REG_RA02_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_TXTAG) >> 18) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA02_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_TXTAG) | (((val) & 0x3) << 18)) +/* Action bit for 0180C2000002 (17:16) */ +#define LTQ_ES_RA_03_00_REG_RA02_ACT (0x3 << 16) +#define LTQ_ES_RA_03_00_REG_RA02_ACT_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_RA_03_00_REG_RA02_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_ACT) >> 16) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA02_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_ACT) | (((val) & 0x3) << 16)) +/* Valid bit for 0180C2000001 (15) */ +#define LTQ_ES_RA_03_00_REG_RA01_VALID (0x1 << 15) +#define LTQ_ES_RA_03_00_REG_RA01_VALID_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_RA_03_00_REG_RA01_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_VALID) >> 15) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA01_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_VALID) | (((val) & 0x1) << 15)) +/* Span bit for 0180C2000001 (14) */ +#define LTQ_ES_RA_03_00_REG_RA01_SPAN (0x1 << 14) +#define LTQ_ES_RA_03_00_REG_RA01_SPAN_VAL(val) (((val) & 0x1) << 14) +#define LTQ_ES_RA_03_00_REG_RA01_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_SPAN) >> 14) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA01_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_SPAN) | (((val) & 0x1) << 14)) +/* Management bit for 0180C2000001 (13) */ +#define LTQ_ES_RA_03_00_REG_RA01_MG (0x1 << 13) +#define LTQ_ES_RA_03_00_REG_RA01_MG_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_RA_03_00_REG_RA01_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_MG) >> 13) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA01_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_MG) | (((val) & 0x1) << 13)) +/* Cross_VLAN bit for 0180C2000001 (12) */ +#define LTQ_ES_RA_03_00_REG_RA01_CV (0x1 << 12) +#define LTQ_ES_RA_03_00_REG_RA01_CV_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_RA_03_00_REG_RA01_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_CV) >> 12) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA01_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_CV) | (((val) & 0x1) << 12)) +/* TXTAG bit for 0180C2000001 (11:10) */ +#define LTQ_ES_RA_03_00_REG_RA01_TXTAG (0x3 << 10) +#define LTQ_ES_RA_03_00_REG_RA01_TXTAG_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_RA_03_00_REG_RA01_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_TXTAG) >> 10) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA01_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_TXTAG) | (((val) & 0x3) << 10)) +/* Action bit for 0180C2000001 (9:8) */ +#define LTQ_ES_RA_03_00_REG_RA01_ACT (0x3 << 8) +#define LTQ_ES_RA_03_00_REG_RA01_ACT_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_RA_03_00_REG_RA01_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_ACT) >> 8) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA01_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_ACT) | (((val) & 0x3) << 8)) +/* Valid bit for 0180C2000000 (7) */ +#define LTQ_ES_RA_03_00_REG_RA00_VALID (0x1 << 7) +#define LTQ_ES_RA_03_00_REG_RA00_VALID_VAL(val) (((val) & 0x1) << 7) +#define LTQ_ES_RA_03_00_REG_RA00_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_VALID) >> 7) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA00_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_VALID) | (((val) & 0x1) << 7)) +/* Span bit for 0180C2000000 (6) */ +#define LTQ_ES_RA_03_00_REG_RA00_SPAN (0x1 << 6) +#define LTQ_ES_RA_03_00_REG_RA00_SPAN_VAL(val) (((val) & 0x1) << 6) +#define LTQ_ES_RA_03_00_REG_RA00_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_SPAN) >> 6) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA00_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_SPAN) | (((val) & 0x1) << 6)) +/* Management bit for 0180C2000000 (5) */ +#define LTQ_ES_RA_03_00_REG_RA00_MG (0x1 << 5) +#define LTQ_ES_RA_03_00_REG_RA00_MG_VAL(val) (((val) & 0x1) << 5) +#define LTQ_ES_RA_03_00_REG_RA00_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_MG) >> 5) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA00_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_MG) | (((val) & 0x1) << 5)) +/* Cross_VLAN bit for 0180C2000000 (4) */ +#define LTQ_ES_RA_03_00_REG_RA00_CV (0x1 << 4) +#define LTQ_ES_RA_03_00_REG_RA00_CV_VAL(val) (((val) & 0x1) << 4) +#define LTQ_ES_RA_03_00_REG_RA00_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_CV) >> 4) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA00_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_CV) | (((val) & 0x1) << 4)) +/* TXTAG bit for 0180C2000000 (3:2) */ +#define LTQ_ES_RA_03_00_REG_RA00_TXTAG (0x3 << 2) +#define LTQ_ES_RA_03_00_REG_RA00_TXTAG_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_RA_03_00_REG_RA00_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_TXTAG) >> 2) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA00_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_TXTAG) | (((val) & 0x3) << 2)) +/* Action bit for 0180C2000000 (1:0) */ +#define LTQ_ES_RA_03_00_REG_RA00_ACT (0x3) +#define LTQ_ES_RA_03_00_REG_RA00_ACT_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_RA_03_00_REG_RA00_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_ACT) >> 0) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA00_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_ACT) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * Protocol Filter 0 + ******************************************************************************/ + +/* Value Compared with Protocol in IP Header (31:24) */ +#define LTQ_ES_PRTCL_F0_REG_PFR3 (0xff << 24) +#define LTQ_ES_PRTCL_F0_REG_PFR3_VAL(val) (((val) & 0xff) << 24) +#define LTQ_ES_PRTCL_F0_REG_PFR3_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR3) >> 24) & 0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR3) | (((val) & 0xff) << 24)) +/* Value Compared with Protocol in IP Header (23:16) */ +#define LTQ_ES_PRTCL_F0_REG_PFR2 (0xff << 16) +#define LTQ_ES_PRTCL_F0_REG_PFR2_VAL(val) (((val) & 0xff) << 16) +#define LTQ_ES_PRTCL_F0_REG_PFR2_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR2) >> 16) & 0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR2) | (((val) & 0xff) << 16)) +/* Value Compared with Protocol in IP Header (15:8) */ +#define LTQ_ES_PRTCL_F0_REG_PFR1 (0xff << 8) +#define LTQ_ES_PRTCL_F0_REG_PFR1_VAL(val) (((val) & 0xff) << 8) +#define LTQ_ES_PRTCL_F0_REG_PFR1_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR1) >> 8) & 0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR1) | (((val) & 0xff) << 8)) +/* Value Compared with Protocol in IP Header (7:0) */ +#define LTQ_ES_PRTCL_F0_REG_PFR0 (0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR0_VAL(val) (((val) & 0xff) << 0) +#define LTQ_ES_PRTCL_F0_REG_PFR0_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR0) >> 0) & 0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR0) | (((val) & 0xff) << 0)) + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/irq.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/irq.h new file mode 100644 index 000000000..06dc17354 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/irq.h @@ -0,0 +1,36 @@ +/* + * arch/mips/include/asm/mach-lantiq/svip/irq.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2010 Lantiq + * + */ + +#ifndef __IRQ_H +#define __IRQ_H + +#include <svip_irq.h> + +#define NR_IRQS 264 + +#include_next <irq.h> + +/* Functions for EXINT handling */ +extern int ifx_enable_external_int(u32 exint, u32 mode); +extern int ifx_disable_external_int(u32 exint); +extern int ifx_external_int_level(u32 exint); + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h new file mode 100644 index 000000000..697d672f3 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h @@ -0,0 +1,71 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_SVIP_H__ +#define _LTQ_SVIP_H__ + +#ifdef CONFIG_SOC_SVIP + +#include <lantiq.h> + +/* Chip IDs */ +#define SOC_ID_SVIP 0x169 + +/* SoC Types */ +#define SOC_TYPE_SVIP 0x01 + +/* ASC0/1 - serial port */ +#define LTQ_ASC0_BASE_ADDR 0x14100100 +#define LTQ_ASC1_BASE_ADDR 0x14100200 +#define LTQ_ASC_SIZE 0x100 +#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC0_BASE_ADDR) + +#define LTQ_ASC_TIR(x) (INT_NUM_IM0_IRL0 + (x * 8)) +#define LTQ_ASC_RIR(x) (INT_NUM_IM0_IRL0 + (x * 8) + 2) +#define LTQ_ASC_EIR(x) (INT_NUM_IM0_IRL0 + (x * 8) + 3) + +/* ICU - interrupt control unit */ +#define LTQ_ICU_BASE_ADDR 0x14106000 +#define LTQ_ICU_BASE_ADDR1 0x14106028 +#define LTQ_ICU_BASE_ADDR2 0x1E016000 +#define LTQ_ICU_BASE_ADDR3 0x1E016028 +#define LTQ_ICU_BASE_ADDR4 0x14106050 +#define LTQ_ICU_BASE_ADDR5 0x14106078 +#define LTQ_ICU_SIZE 0x100 + +/* WDT */ +#define LTQ_WDT_BASE_ADDR 0x1F8803F0 +#define LTQ_WDT_SIZE 0x10 + +/* Status */ +#define LTQ_STATUS_BASE_ADDR (KSEG1 + 0x1E000500) +#define LTQ_STATUS_CHIPID ((u32 *)(LTQ_STATUS_BASE_ADDR + 0x000C)) + +#define LTQ_EIU_BASE_ADDR 0 + +#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y)) +#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x)) + +extern __iomem void *ltq_ebu_membase; + +extern void ltq_gpio_configure(int port, int pin, bool dirin, bool puen, + bool altsel0, bool altsel1); +extern int ltq_port_get_dir(unsigned int port, unsigned int pin); +extern int ltq_port_get_puden(unsigned int port, unsigned int pin); +extern int ltq_port_get_altsel0(unsigned int port, unsigned int pin); +extern int ltq_port_get_altsel1(unsigned int port, unsigned int pin); + +#define ltq_is_ar9() 0 +#define ltq_is_vr9() 0 +#define ltq_is_falcon() 0 + +#define BS_FLASH 0 +#define LTQ_RST_CAUSE_WDTRST 0x2 + +#endif /* CONFIG_SOC_SVIP */ +#endif /* _LTQ_SVIP_H__ */ diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h new file mode 100644 index 000000000..79966b7be --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h @@ -0,0 +1,242 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __MPS_REG_H +#define __MPS_REG_H + +#define mbs_r32(reg) ltq_r32(&mbs->reg) +#define mbs_w32(val, reg) ltq_w32(val, &mbs->reg) +#define mbs_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &mbs->reg) + +/** MBS register structure */ +struct svip_reg_mbs { + unsigned long reserved0[4]; + unsigned long mbsr0; /* 0x0010 */ + unsigned long mbsr1; /* 0x0014 */ + unsigned long mbsr2; /* 0x0018 */ + unsigned long mbsr3; /* 0x001c */ + unsigned long mbsr4; /* 0x0020 */ + unsigned long mbsr5; /* 0x0024 */ + unsigned long mbsr6; /* 0x0028 */ + unsigned long mbsr7; /* 0x002c */ + unsigned long mbsr8; /* 0x0030 */ + unsigned long mbsr9; /* 0x0034 */ + unsigned long mbsr10; /* 0x0038 */ + unsigned long mbsr11; /* 0x003c */ + unsigned long mbsr12; /* 0x0040 */ + unsigned long mbsr13; /* 0x0044 */ + unsigned long mbsr14; /* 0x0048 */ + unsigned long mbsr15; /* 0x004c */ + unsigned long mbsr16; /* 0x0050 */ + unsigned long mbsr17; /* 0x0054 */ + unsigned long mbsr18; /* 0x0058 */ + unsigned long mbsr19; /* 0x005c */ + unsigned long mbsr20; /* 0x0060 */ + unsigned long mbsr21; /* 0x0064 */ + unsigned long mbsr22; /* 0x0068 */ + unsigned long mbsr23; /* 0x006c */ + unsigned long mbsr24; /* 0x0070 */ + unsigned long mbsr25; /* 0x0074 */ + unsigned long mbsr26; /* 0x0078 */ + unsigned long mbsr27; /* 0x007c */ + unsigned long mbsr28; /* 0x0080 */ +}; + +/** MPS register structure */ +struct svip_reg_mps { + volatile unsigned long mps_swirn0set; /* 0x0000 */ + volatile unsigned long mps_swirn0en; /* 0x0004 */ + volatile unsigned long mps_swirn0cr; /* 0x0008 */ + volatile unsigned long mps_swirn0icr; /* 0x000C */ + volatile unsigned long mps_swirn1set; /* 0x0010 */ + volatile unsigned long mps_swirn1en; /* 0x0014 */ + volatile unsigned long mps_swirn1cr; /* 0x0018 */ + volatile unsigned long mps_swirn1icr; /* 0x001C */ + volatile unsigned long mps_swirn2set; /* 0x0020 */ + volatile unsigned long mps_swirn2en; /* 0x0024 */ + volatile unsigned long mps_swirn2cr; /* 0x0028 */ + volatile unsigned long mps_swirn2icr; /* 0x002C */ + volatile unsigned long mps_swirn3set; /* 0x0030 */ + volatile unsigned long mps_swirn3en; /* 0x0034 */ + volatile unsigned long mps_swirn3cr; /* 0x0038 */ + volatile unsigned long mps_swirn3icr; /* 0x003C */ + volatile unsigned long mps_swirn4set; /* 0x0040 */ + volatile unsigned long mps_swirn4en; /* 0x0044 */ + volatile unsigned long mps_swirn4cr; /* 0x0048 */ + volatile unsigned long mps_swirn4icr; /* 0x004C */ + volatile unsigned long mps_swirn5set; /* 0x0050 */ + volatile unsigned long mps_swirn5en; /* 0x0054 */ + volatile unsigned long mps_swirn5cr; /* 0x0058 */ + volatile unsigned long mps_swirn5icr; /* 0x005C */ + volatile unsigned long mps_swirn6set; /* 0x0060 */ + volatile unsigned long mps_swirn6en; /* 0x0064 */ + volatile unsigned long mps_swirn6cr; /* 0x0068 */ + volatile unsigned long mps_swirn6icr; /* 0x006C */ + volatile unsigned long mps_swirn7set; /* 0x0070 */ + volatile unsigned long mps_swirn7en; /* 0x0074 */ + volatile unsigned long mps_swirn7cr; /* 0x0078 */ + volatile unsigned long mps_swirn7icr; /* 0x007C */ + volatile unsigned long mps_swirn8set; /* 0x0080 */ + volatile unsigned long mps_swirn8en; /* 0x0084 */ + volatile unsigned long mps_swirn8cr; /* 0x0088 */ + volatile unsigned long mps_swirn8icr; /* 0x008C */ +}; + +/* Software Interrupt */ +#define IFX_MPS_SWIRN0SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0000)) +#define IFX_MPS_SWIRN0EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0004)) +#define IFX_MPS_SWIRN0CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0008)) +#define IFX_MPS_SWIRN0ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x000C)) +#define IFX_MPS_SWIRN1SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0010)) +#define IFX_MPS_SWIRN1EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0014)) +#define IFX_MPS_SWIRN1CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0018)) +#define IFX_MPS_SWIRN1ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x001C)) +#define IFX_MPS_SWIRN2SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0020)) +#define IFX_MPS_SWIRN2EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0024)) +#define IFX_MPS_SWIRN2CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0028)) +#define IFX_MPS_SWIRN2ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x002C)) +#define IFX_MPS_SWIRN3SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0030)) +#define IFX_MPS_SWIRN3EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0034)) +#define IFX_MPS_SWIRN3CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0038)) +#define IFX_MPS_SWIRN3ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x003C)) +#define IFX_MPS_SWIRN4SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0040)) +#define IFX_MPS_SWIRN4EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0044)) +#define IFX_MPS_SWIRN4CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0048)) +#define IFX_MPS_SWIRN4ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x004C)) +#define IFX_MPS_SWIRN5SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0050)) +#define IFX_MPS_SWIRN5EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0054)) +#define IFX_MPS_SWIRN5CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0058)) +#define IFX_MPS_SWIRN5ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x005C)) +#define IFX_MPS_SWIRN6SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0060)) +#define IFX_MPS_SWIRN6EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0064)) +#define IFX_MPS_SWIRN6CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0068)) +#define IFX_MPS_SWIRN6ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x006C)) +#define IFX_MPS_SWIRN7SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0070)) +#define IFX_MPS_SWIRN7EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0074)) +#define IFX_MPS_SWIRN7CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0078)) +#define IFX_MPS_SWIRN7ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x007C)) +#define IFX_MPS_SWIRN8SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0080)) +#define IFX_MPS_SWIRN8EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0084)) +#define IFX_MPS_SWIRN8ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x008C)) +#define IFX_MPS_SWIRN8CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0088)) + +/******************************************************************************* + * MPS_SWIRNSET Register + ******************************************************************************/ + +/* Software Interrupt Request IR5 (5) */ +#define IFX_MPS_SWIRNSET_IR5 (0x1 << 5) +#define IFX_MPS_SWIRNSET_IR5_VAL(val) (((val) & 0x1) << 5) +#define IFX_MPS_SWIRNSET_IR5_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR5) | (val) & 1) << 5) +/* Software Interrupt Request IR4 (4) */ +#define IFX_MPS_SWIRNSET_IR4 (0x1 << 4) +#define IFX_MPS_SWIRNSET_IR4_VAL(val) (((val) & 0x1) << 4) +#define IFX_MPS_SWIRNSET_IR4_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR4) | (val) & 1) << 4) +/* Software Interrupt Request IR3 (3) */ +#define IFX_MPS_SWIRNSET_IR3 (0x1 << 3) +#define IFX_MPS_SWIRNSET_IR3_VAL(val) (((val) & 0x1) << 3) +#define IFX_MPS_SWIRNSET_IR3_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR3) | (val) & 1) << 3) +/* Software Interrupt Request IR2 (2) */ +#define IFX_MPS_SWIRNSET_IR2 (0x1 << 2) +#define IFX_MPS_SWIRNSET_IR2_VAL(val) (((val) & 0x1) << 2) +#define IFX_MPS_SWIRNSET_IR2_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR2) | (val) & 1) << 2) +/* Software Interrupt Request IR1 (1) */ +#define IFX_MPS_SWIRNSET_IR1 (0x1 << 1) +#define IFX_MPS_SWIRNSET_IR1_VAL(val) (((val) & 0x1) << 1) +#define IFX_MPS_SWIRNSET_IR1_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR1) | (val) & 1) << 1) +/* Software Interrupt Request IR0 (0) */ +#define IFX_MPS_SWIRNSET_IR0 (0x1) +#define IFX_MPS_SWIRNSET_IR0_VAL(val) (((val) & 0x1) << 0) +#define IFX_MPS_SWIRNSET_IR0_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR0) | (val) & 1) << 0) + +/******************************************************************************* + * MPS_SWIRNEN Register + ******************************************************************************/ + +/* Software Interrupt Request IR5 (5) */ +#define IFX_MPS_SWIRNEN_IR5 (0x1 << 5) +#define IFX_MPS_SWIRNEN_IR5_VAL(val) (((val) & 0x1) << 5) +#define IFX_MPS_SWIRNEN_IR5_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR5) >> 5) & 0x1) +#define IFX_MPS_SWIRNEN_IR5_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR5) | (((val) & 0x1) << 5)) +/* Software Interrupt Request IR4 (4) */ +#define IFX_MPS_SWIRNEN_IR4 (0x1 << 4) +#define IFX_MPS_SWIRNEN_IR4_VAL(val) (((val) & 0x1) << 4) +#define IFX_MPS_SWIRNEN_IR4_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR4) >> 4) & 0x1) +#define IFX_MPS_SWIRNEN_IR4_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR4) | (((val) & 0x1) << 4)) +/* Software Interrupt Request IR3 (3) */ +#define IFX_MPS_SWIRNEN_IR3 (0x1 << 3) +#define IFX_MPS_SWIRNEN_IR3_VAL(val) (((val) & 0x1) << 3) +#define IFX_MPS_SWIRNEN_IR3_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR3) >> 3) & 0x1) +#define IFX_MPS_SWIRNEN_IR3_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR3) | (((val) & 0x1) << 3)) +/* Software Interrupt Request IR2 (2) */ +#define IFX_MPS_SWIRNEN_IR2 (0x1 << 2) +#define IFX_MPS_SWIRNEN_IR2_VAL(val) (((val) & 0x1) << 2) +#define IFX_MPS_SWIRNEN_IR2_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR2) >> 2) & 0x1) +#define IFX_MPS_SWIRNEN_IR2_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR2) | (((val) & 0x1) << 2)) +/* Software Interrupt Request IR1 (1) */ +#define IFX_MPS_SWIRNEN_IR1 (0x1 << 1) +#define IFX_MPS_SWIRNEN_IR1_VAL(val) (((val) & 0x1) << 1) +#define IFX_MPS_SWIRNEN_IR1_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR1) >> 1) & 0x1) +#define IFX_MPS_SWIRNEN_IR1_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR1) | (((val) & 0x1) << 1)) +/* Software Interrupt Request IR0 (0) */ +#define IFX_MPS_SWIRNEN_IR0 (0x1) +#define IFX_MPS_SWIRNEN_IR0_VAL(val) (((val) & 0x1) << 0) +#define IFX_MPS_SWIRNEN_IR0_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR0) >> 0) & 0x1) +#define IFX_MPS_SWIRNEN_IR0_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * MPS_SWIRNICR Register + ******************************************************************************/ + +/* Software Interrupt Request IR5 (5) */ +#define IFX_MPS_SWIRNICR_IR5 (0x1 << 5) +#define IFX_MPS_SWIRNICR_IR5_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR5) >> 5) & 0x1) +/* Software Interrupt Request IR4 (4) */ +#define IFX_MPS_SWIRNICR_IR4 (0x1 << 4) +#define IFX_MPS_SWIRNICR_IR4_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR4) >> 4) & 0x1) +/* Software Interrupt Request IR3 (3) */ +#define IFX_MPS_SWIRNICR_IR3 (0x1 << 3) +#define IFX_MPS_SWIRNICR_IR3_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR3) >> 3) & 0x1) +/* Software Interrupt Request IR2 (2) */ +#define IFX_MPS_SWIRNICR_IR2 (0x1 << 2) +#define IFX_MPS_SWIRNICR_IR2_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR2) >> 2) & 0x1) +/* Software Interrupt Request IR1 (1) */ +#define IFX_MPS_SWIRNICR_IR1 (0x1 << 1) +#define IFX_MPS_SWIRNICR_IR1_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR1) >> 1) & 0x1) +/* Software Interrupt Request IR0 (0) */ +#define IFX_MPS_SWIRNICR_IR0 (0x1) +#define IFX_MPS_SWIRNICR_IR0_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR0) >> 0) & 0x1) + +/******************************************************************************* + * MPS_SWIRNCR Register + ******************************************************************************/ + +/* Software Interrupt Request IR5 (5) */ +#define IFX_MPS_SWIRNCR_IR5 (0x1 << 5) +#define IFX_MPS_SWIRNCR_IR5_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR5) >> 5) & 0x1) +/* Software Interrupt Request IR4 (4) */ +#define IFX_MPS_SWIRNCR_IR4 (0x1 << 4) +#define IFX_MPS_SWIRNCR_IR4_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR4) >> 4) & 0x1) +/* Software Interrupt Request IR3 (3) */ +#define IFX_MPS_SWIRNCR_IR3 (0x1 << 3) +#define IFX_MPS_SWIRNCR_IR3_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR3) >> 3) & 0x1) +/* Software Interrupt Request IR2 (2) */ +#define IFX_MPS_SWIRNCR_IR2 (0x1 << 2) +#define IFX_MPS_SWIRNCR_IR2_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR2) >> 2) & 0x1) +/* Software Interrupt Request IR1 (1) */ +#define IFX_MPS_SWIRNCR_IR1 (0x1 << 1) +#define IFX_MPS_SWIRNCR_IR1_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR1) >> 1) & 0x1) +/* Software Interrupt Request IR0 (0) */ +#define IFX_MPS_SWIRNCR_IR0 (0x1) +#define IFX_MPS_SWIRNCR_IR0_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR0) >> 0) & 0x1) + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/port_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/port_reg.h new file mode 100644 index 000000000..57d04917f --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/port_reg.h @@ -0,0 +1,3262 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __PORT_REG_H +#define __PORT_REG_H + +#define port_r32(reg) __raw_readl(®) +#define port_w32(val, reg) __raw_writel(val, ®) + +/** PORT register structure */ +struct svip_reg_port { + volatile u32 out; /* 0x0000 */ + volatile u32 in; /* 0x0004 */ + volatile u32 dir; /* 0x0008 */ + volatile u32 altsel0; /* 0x000C */ + volatile u32 altsel1; /* 0x0010 */ + volatile u32 puen; /* 0x0014 */ + volatile u32 exintcr0; /* 0x0018 */ + volatile u32 exintcr1; /* 0x001C */ + volatile u32 irncr; /* 0x0020 */ + volatile u32 irnicr; /* 0x0024 */ + volatile u32 irnen; /* 0x0028 */ + volatile u32 irncfg; /* 0x002C */ + volatile u32 irnenset; /* 0x0030 */ + volatile u32 irnenclr; /* 0x0034 */ +}; + +/******************************************************************************* + * Port 0 Data Output Register + ******************************************************************************/ + +/* Port 0 Pin # Output Value (19) */ +#define PORT_P0_OUT_P19 (0x1 << 19) +#define PORT_P0_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_OUT_P19_GET(val) ((((val) & PORT_P0_OUT_P19) >> 19) & 0x1) +#define PORT_P0_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 0 Pin # Output Value (18) */ +#define PORT_P0_OUT_P18 (0x1 << 18) +#define PORT_P0_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P0_OUT_P18_GET(val) ((((val) & PORT_P0_OUT_P18) >> 18) & 0x1) +#define PORT_P0_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 0 Pin # Output Value (17) */ +#define PORT_P0_OUT_P17 (0x1 << 17) +#define PORT_P0_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_OUT_P17_GET(val) ((((val) & PORT_P0_OUT_P17) >> 17) & 0x1) +#define PORT_P0_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 0 Pin # Output Value (16) */ +#define PORT_P0_OUT_P16 (0x1 << 16) +#define PORT_P0_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_OUT_P16_GET(val) ((((val) & PORT_P0_OUT_P16) >> 16) & 0x1) +#define PORT_P0_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 0 Pin # Output Value (15) */ +#define PORT_P0_OUT_P15 (0x1 << 15) +#define PORT_P0_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_OUT_P15_GET(val) ((((val) & PORT_P0_OUT_P15) >> 15) & 0x1) +#define PORT_P0_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 0 Pin # Output Value (14) */ +#define PORT_P0_OUT_P14 (0x1 << 14) +#define PORT_P0_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_OUT_P14_GET(val) ((((val) & PORT_P0_OUT_P14) >> 14) & 0x1) +#define PORT_P0_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 0 Pin # Output Value (13) */ +#define PORT_P0_OUT_P13 (0x1 << 13) +#define PORT_P0_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_OUT_P13_GET(val) ((((val) & PORT_P0_OUT_P13) >> 13) & 0x1) +#define PORT_P0_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 0 Pin # Output Value (12) */ +#define PORT_P0_OUT_P12 (0x1 << 12) +#define PORT_P0_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_OUT_P12_GET(val) ((((val) & PORT_P0_OUT_P12) >> 12) & 0x1) +#define PORT_P0_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 0 Pin # Output Value (11) */ +#define PORT_P0_OUT_P11 (0x1 << 11) +#define PORT_P0_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_OUT_P11_GET(val) ((((val) & PORT_P0_OUT_P11) >> 11) & 0x1) +#define PORT_P0_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 0 Pin # Output Value (10) */ +#define PORT_P0_OUT_P10 (0x1 << 10) +#define PORT_P0_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_OUT_P10_GET(val) ((((val) & PORT_P0_OUT_P10) >> 10) & 0x1) +#define PORT_P0_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 0 Pin # Output Value (9) */ +#define PORT_P0_OUT_P9 (0x1 << 9) +#define PORT_P0_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_OUT_P9_GET(val) ((((val) & PORT_P0_OUT_P9) >> 9) & 0x1) +#define PORT_P0_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 0 Pin # Output Value (8) */ +#define PORT_P0_OUT_P8 (0x1 << 8) +#define PORT_P0_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_OUT_P8_GET(val) ((((val) & PORT_P0_OUT_P8) >> 8) & 0x1) +#define PORT_P0_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 0 Pin # Output Value (7) */ +#define PORT_P0_OUT_P7 (0x1 << 7) +#define PORT_P0_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_OUT_P7_GET(val) ((((val) & PORT_P0_OUT_P7) >> 7) & 0x1) +#define PORT_P0_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 0 Pin # Output Value (6) */ +#define PORT_P0_OUT_P6 (0x1 << 6) +#define PORT_P0_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_OUT_P6_GET(val) ((((val) & PORT_P0_OUT_P6) >> 6) & 0x1) +#define PORT_P0_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 0 Pin # Output Value (5) */ +#define PORT_P0_OUT_P5 (0x1 << 5) +#define PORT_P0_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P0_OUT_P5_GET(val) ((((val) & PORT_P0_OUT_P5) >> 5) & 0x1) +#define PORT_P0_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 0 Pin # Output Value (4) */ +#define PORT_P0_OUT_P4 (0x1 << 4) +#define PORT_P0_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P0_OUT_P4_GET(val) ((((val) & PORT_P0_OUT_P4) >> 4) & 0x1) +#define PORT_P0_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 0 Pin # Output Value (3) */ +#define PORT_P0_OUT_P3 (0x1 << 3) +#define PORT_P0_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_OUT_P3_GET(val) ((((val) & PORT_P0_OUT_P3) >> 3) & 0x1) +#define PORT_P0_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 0 Pin # Output Value (2) */ +#define PORT_P0_OUT_P2 (0x1 << 2) +#define PORT_P0_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P0_OUT_P2_GET(val) ((((val) & PORT_P0_OUT_P2) >> 2) & 0x1) +#define PORT_P0_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 0 Pin # Output Value (1) */ +#define PORT_P0_OUT_P1 (0x1 << 1) +#define PORT_P0_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P0_OUT_P1_GET(val) ((((val) & PORT_P0_OUT_P1) >> 1) & 0x1) +#define PORT_P0_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 0 Pin # Output Value (0) */ +#define PORT_P0_OUT_P0 (0x1) +#define PORT_P0_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P0_OUT_P0_GET(val) ((((val) & PORT_P0_OUT_P0) >> 0) & 0x1) +#define PORT_P0_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 0 Data Input Register + ******************************************************************************/ + +/* Port 0 Pin # Latched Input Value (19) */ +#define PORT_P0_IN_P19 (0x1 << 19) +#define PORT_P0_IN_P19_GET(val) ((((val) & PORT_P0_IN_P19) >> 19) & 0x1) +/* Port 0 Pin # Latched Input Value (18) */ +#define PORT_P0_IN_P18 (0x1 << 18) +#define PORT_P0_IN_P18_GET(val) ((((val) & PORT_P0_IN_P18) >> 18) & 0x1) +/* Port 0 Pin # Latched Input Value (17) */ +#define PORT_P0_IN_P17 (0x1 << 17) +#define PORT_P0_IN_P17_GET(val) ((((val) & PORT_P0_IN_P17) >> 17) & 0x1) +/* Port 0 Pin # Latched Input Value (16) */ +#define PORT_P0_IN_P16 (0x1 << 16) +#define PORT_P0_IN_P16_GET(val) ((((val) & PORT_P0_IN_P16) >> 16) & 0x1) +/* Port 0 Pin # Latched Input Value (15) */ +#define PORT_P0_IN_P15 (0x1 << 15) +#define PORT_P0_IN_P15_GET(val) ((((val) & PORT_P0_IN_P15) >> 15) & 0x1) +/* Port 0 Pin # Latched Input Value (14) */ +#define PORT_P0_IN_P14 (0x1 << 14) +#define PORT_P0_IN_P14_GET(val) ((((val) & PORT_P0_IN_P14) >> 14) & 0x1) +/* Port 0 Pin # Latched Input Value (13) */ +#define PORT_P0_IN_P13 (0x1 << 13) +#define PORT_P0_IN_P13_GET(val) ((((val) & PORT_P0_IN_P13) >> 13) & 0x1) +/* Port 0 Pin # Latched Input Value (12) */ +#define PORT_P0_IN_P12 (0x1 << 12) +#define PORT_P0_IN_P12_GET(val) ((((val) & PORT_P0_IN_P12) >> 12) & 0x1) +/* Port 0 Pin # Latched Input Value (11) */ +#define PORT_P0_IN_P11 (0x1 << 11) +#define PORT_P0_IN_P11_GET(val) ((((val) & PORT_P0_IN_P11) >> 11) & 0x1) +/* Port 0 Pin # Latched Input Value (10) */ +#define PORT_P0_IN_P10 (0x1 << 10) +#define PORT_P0_IN_P10_GET(val) ((((val) & PORT_P0_IN_P10) >> 10) & 0x1) +/* Port 0 Pin # Latched Input Value (9) */ +#define PORT_P0_IN_P9 (0x1 << 9) +#define PORT_P0_IN_P9_GET(val) ((((val) & PORT_P0_IN_P9) >> 9) & 0x1) +/* Port 0 Pin # Latched Input Value (8) */ +#define PORT_P0_IN_P8 (0x1 << 8) +#define PORT_P0_IN_P8_GET(val) ((((val) & PORT_P0_IN_P8) >> 8) & 0x1) +/* Port 0 Pin # Latched Input Value (7) */ +#define PORT_P0_IN_P7 (0x1 << 7) +#define PORT_P0_IN_P7_GET(val) ((((val) & PORT_P0_IN_P7) >> 7) & 0x1) +/* Port 0 Pin # Latched Input Value (6) */ +#define PORT_P0_IN_P6 (0x1 << 6) +#define PORT_P0_IN_P6_GET(val) ((((val) & PORT_P0_IN_P6) >> 6) & 0x1) +/* Port 0 Pin # Latched Input Value (5) */ +#define PORT_P0_IN_P5 (0x1 << 5) +#define PORT_P0_IN_P5_GET(val) ((((val) & PORT_P0_IN_P5) >> 5) & 0x1) +/* Port 0 Pin # Latched Input Value (4) */ +#define PORT_P0_IN_P4 (0x1 << 4) +#define PORT_P0_IN_P4_GET(val) ((((val) & PORT_P0_IN_P4) >> 4) & 0x1) +/* Port 0 Pin # Latched Input Value (3) */ +#define PORT_P0_IN_P3 (0x1 << 3) +#define PORT_P0_IN_P3_GET(val) ((((val) & PORT_P0_IN_P3) >> 3) & 0x1) +/* Port 0 Pin # Latched Input Value (2) */ +#define PORT_P0_IN_P2 (0x1 << 2) +#define PORT_P0_IN_P2_GET(val) ((((val) & PORT_P0_IN_P2) >> 2) & 0x1) +/* Port 0 Pin # Latched Input Value (1) */ +#define PORT_P0_IN_P1 (0x1 << 1) +#define PORT_P0_IN_P1_GET(val) ((((val) & PORT_P0_IN_P1) >> 1) & 0x1) +/* Port 0 Pin # Latched Input Value (0) */ +#define PORT_P0_IN_P0 (0x1) +#define PORT_P0_IN_P0_GET(val) ((((val) & PORT_P0_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 0 Direction Register + ******************************************************************************/ + +/* Port 0 Pin #Direction Control (19) */ +#define PORT_P0_DIR_P19 (0x1 << 19) +#define PORT_P0_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_DIR_P19_GET(val) ((((val) & PORT_P0_DIR_P19) >> 19) & 0x1) +#define PORT_P0_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 0 Pin #Direction Control (18) */ +#define PORT_P0_DIR_P18 (0x1 << 18) +#define PORT_P0_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P0_DIR_P18_GET(val) ((((val) & PORT_P0_DIR_P18) >> 18) & 0x1) +#define PORT_P0_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 0 Pin #Direction Control (17) */ +#define PORT_P0_DIR_P17 (0x1 << 17) +#define PORT_P0_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_DIR_P17_GET(val) ((((val) & PORT_P0_DIR_P17) >> 17) & 0x1) +#define PORT_P0_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 0 Pin #Direction Control (16) */ +#define PORT_P0_DIR_P16 (0x1 << 16) +#define PORT_P0_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_DIR_P16_GET(val) ((((val) & PORT_P0_DIR_P16) >> 16) & 0x1) +#define PORT_P0_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 0 Pin #Direction Control (15) */ +#define PORT_P0_DIR_P15 (0x1 << 15) +#define PORT_P0_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_DIR_P15_GET(val) ((((val) & PORT_P0_DIR_P15) >> 15) & 0x1) +#define PORT_P0_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 0 Pin #Direction Control (14) */ +#define PORT_P0_DIR_P14 (0x1 << 14) +#define PORT_P0_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_DIR_P14_GET(val) ((((val) & PORT_P0_DIR_P14) >> 14) & 0x1) +#define PORT_P0_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 0 Pin #Direction Control (13) */ +#define PORT_P0_DIR_P13 (0x1 << 13) +#define PORT_P0_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_DIR_P13_GET(val) ((((val) & PORT_P0_DIR_P13) >> 13) & 0x1) +#define PORT_P0_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 0 Pin #Direction Control (12) */ +#define PORT_P0_DIR_P12 (0x1 << 12) +#define PORT_P0_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_DIR_P12_GET(val) ((((val) & PORT_P0_DIR_P12) >> 12) & 0x1) +#define PORT_P0_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 0 Pin #Direction Control (11) */ +#define PORT_P0_DIR_P11 (0x1 << 11) +#define PORT_P0_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_DIR_P11_GET(val) ((((val) & PORT_P0_DIR_P11) >> 11) & 0x1) +#define PORT_P0_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 0 Pin #Direction Control (10) */ +#define PORT_P0_DIR_P10 (0x1 << 10) +#define PORT_P0_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_DIR_P10_GET(val) ((((val) & PORT_P0_DIR_P10) >> 10) & 0x1) +#define PORT_P0_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 0 Pin #Direction Control (9) */ +#define PORT_P0_DIR_P9 (0x1 << 9) +#define PORT_P0_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_DIR_P9_GET(val) ((((val) & PORT_P0_DIR_P9) >> 9) & 0x1) +#define PORT_P0_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 0 Pin #Direction Control (8) */ +#define PORT_P0_DIR_P8 (0x1 << 8) +#define PORT_P0_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_DIR_P8_GET(val) ((((val) & PORT_P0_DIR_P8) >> 8) & 0x1) +#define PORT_P0_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 0 Pin #Direction Control (7) */ +#define PORT_P0_DIR_P7 (0x1 << 7) +#define PORT_P0_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_DIR_P7_GET(val) ((((val) & PORT_P0_DIR_P7) >> 7) & 0x1) +#define PORT_P0_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 0 Pin #Direction Control (6) */ +#define PORT_P0_DIR_P6 (0x1 << 6) +#define PORT_P0_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_DIR_P6_GET(val) ((((val) & PORT_P0_DIR_P6) >> 6) & 0x1) +#define PORT_P0_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 0 Pin #Direction Control (5) */ +#define PORT_P0_DIR_P5 (0x1 << 5) +#define PORT_P0_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P0_DIR_P5_GET(val) ((((val) & PORT_P0_DIR_P5) >> 5) & 0x1) +#define PORT_P0_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 0 Pin #Direction Control (4) */ +#define PORT_P0_DIR_P4 (0x1 << 4) +#define PORT_P0_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P0_DIR_P4_GET(val) ((((val) & PORT_P0_DIR_P4) >> 4) & 0x1) +#define PORT_P0_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 0 Pin #Direction Control (3) */ +#define PORT_P0_DIR_P3 (0x1 << 3) +#define PORT_P0_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_DIR_P3_GET(val) ((((val) & PORT_P0_DIR_P3) >> 3) & 0x1) +#define PORT_P0_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 0 Pin #Direction Control (2) */ +#define PORT_P0_DIR_P2 (0x1 << 2) +#define PORT_P0_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P0_DIR_P2_GET(val) ((((val) & PORT_P0_DIR_P2) >> 2) & 0x1) +#define PORT_P0_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 0 Pin #Direction Control (1) */ +#define PORT_P0_DIR_P1 (0x1 << 1) +#define PORT_P0_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P0_DIR_P1_GET(val) ((((val) & PORT_P0_DIR_P1) >> 1) & 0x1) +#define PORT_P0_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 0 Pin #Direction Control (0) */ +#define PORT_P0_DIR_P0 (0x1) +#define PORT_P0_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P0_DIR_P0_GET(val) ((((val) & PORT_P0_DIR_P0) >> 0) & 0x1) +#define PORT_P0_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 0 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 0 Bit # (19) */ +#define PORT_P0_ALTSEL0_P19 (0x1 << 19) +#define PORT_P0_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_ALTSEL0_P19_GET(val) ((((val) & PORT_P0_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P0_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 0 Bit # (18) */ +#define PORT_P0_ALTSEL0_P18 (0x1 << 18) +#define PORT_P0_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P0_ALTSEL0_P18_GET(val) ((((val) & PORT_P0_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P0_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 0 Bit # (17) */ +#define PORT_P0_ALTSEL0_P17 (0x1 << 17) +#define PORT_P0_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_ALTSEL0_P17_GET(val) ((((val) & PORT_P0_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P0_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 0 Bit # (16) */ +#define PORT_P0_ALTSEL0_P16 (0x1 << 16) +#define PORT_P0_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_ALTSEL0_P16_GET(val) ((((val) & PORT_P0_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P0_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 0 Bit # (15) */ +#define PORT_P0_ALTSEL0_P15 (0x1 << 15) +#define PORT_P0_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_ALTSEL0_P15_GET(val) ((((val) & PORT_P0_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P0_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 0 Bit # (14) */ +#define PORT_P0_ALTSEL0_P14 (0x1 << 14) +#define PORT_P0_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_ALTSEL0_P14_GET(val) ((((val) & PORT_P0_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P0_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 0 Bit # (13) */ +#define PORT_P0_ALTSEL0_P13 (0x1 << 13) +#define PORT_P0_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_ALTSEL0_P13_GET(val) ((((val) & PORT_P0_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P0_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 0 Bit # (12) */ +#define PORT_P0_ALTSEL0_P12 (0x1 << 12) +#define PORT_P0_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_ALTSEL0_P12_GET(val) ((((val) & PORT_P0_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P0_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 0 Bit # (11) */ +#define PORT_P0_ALTSEL0_P11 (0x1 << 11) +#define PORT_P0_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_ALTSEL0_P11_GET(val) ((((val) & PORT_P0_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P0_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 0 Bit # (10) */ +#define PORT_P0_ALTSEL0_P10 (0x1 << 10) +#define PORT_P0_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_ALTSEL0_P10_GET(val) ((((val) & PORT_P0_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P0_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 0 Bit # (9) */ +#define PORT_P0_ALTSEL0_P9 (0x1 << 9) +#define PORT_P0_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_ALTSEL0_P9_GET(val) ((((val) & PORT_P0_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P0_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 0 Bit # (8) */ +#define PORT_P0_ALTSEL0_P8 (0x1 << 8) +#define PORT_P0_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_ALTSEL0_P8_GET(val) ((((val) & PORT_P0_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P0_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 0 Bit # (7) */ +#define PORT_P0_ALTSEL0_P7 (0x1 << 7) +#define PORT_P0_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_ALTSEL0_P7_GET(val) ((((val) & PORT_P0_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P0_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 0 Bit # (6) */ +#define PORT_P0_ALTSEL0_P6 (0x1 << 6) +#define PORT_P0_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_ALTSEL0_P6_GET(val) ((((val) & PORT_P0_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P0_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 0 Bit # (5) */ +#define PORT_P0_ALTSEL0_P5 (0x1 << 5) +#define PORT_P0_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P0_ALTSEL0_P5_GET(val) ((((val) & PORT_P0_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P0_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 0 Bit # (4) */ +#define PORT_P0_ALTSEL0_P4 (0x1 << 4) +#define PORT_P0_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P0_ALTSEL0_P4_GET(val) ((((val) & PORT_P0_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P0_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 0 Bit # (3) */ +#define PORT_P0_ALTSEL0_P3 (0x1 << 3) +#define PORT_P0_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_ALTSEL0_P3_GET(val) ((((val) & PORT_P0_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P0_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 0 Bit # (2) */ +#define PORT_P0_ALTSEL0_P2 (0x1 << 2) +#define PORT_P0_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P0_ALTSEL0_P2_GET(val) ((((val) & PORT_P0_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P0_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 0 Bit # (1) */ +#define PORT_P0_ALTSEL0_P1 (0x1 << 1) +#define PORT_P0_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P0_ALTSEL0_P1_GET(val) ((((val) & PORT_P0_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P0_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 0 Bit # (0) */ +#define PORT_P0_ALTSEL0_P0 (0x1) +#define PORT_P0_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P0_ALTSEL0_P0_GET(val) ((((val) & PORT_P0_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P0_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 0 Alternate Function Select Register 1 + ******************************************************************************/ + +/* Alternate Function at Port 0 Bit # (13) */ +#define PORT_P0_ALTSEL1_P13 (0x1 << 13) +#define PORT_P0_ALTSEL1_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_ALTSEL1_P13_GET(val) ((((val) & PORT_P0_ALTSEL1_P13) >> 13) & 0x1) +#define PORT_P0_ALTSEL1_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 0 Bit # (12) */ +#define PORT_P0_ALTSEL1_P12 (0x1 << 12) +#define PORT_P0_ALTSEL1_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_ALTSEL1_P12_GET(val) ((((val) & PORT_P0_ALTSEL1_P12) >> 12) & 0x1) +#define PORT_P0_ALTSEL1_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 0 Bit # (11) */ +#define PORT_P0_ALTSEL1_P11 (0x1 << 11) +#define PORT_P0_ALTSEL1_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_ALTSEL1_P11_GET(val) ((((val) & PORT_P0_ALTSEL1_P11) >> 11) & 0x1) +#define PORT_P0_ALTSEL1_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 0 Bit # (10) */ +#define PORT_P0_ALTSEL1_P10 (0x1 << 10) +#define PORT_P0_ALTSEL1_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_ALTSEL1_P10_GET(val) ((((val) & PORT_P0_ALTSEL1_P10) >> 10) & 0x1) +#define PORT_P0_ALTSEL1_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 0 Bit # (9) */ +#define PORT_P0_ALTSEL1_P9 (0x1 << 9) +#define PORT_P0_ALTSEL1_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_ALTSEL1_P9_GET(val) ((((val) & PORT_P0_ALTSEL1_P9) >> 9) & 0x1) +#define PORT_P0_ALTSEL1_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 0 Bit # (8) */ +#define PORT_P0_ALTSEL1_P8 (0x1 << 8) +#define PORT_P0_ALTSEL1_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_ALTSEL1_P8_GET(val) ((((val) & PORT_P0_ALTSEL1_P8) >> 8) & 0x1) +#define PORT_P0_ALTSEL1_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 0 Bit # (7) */ +#define PORT_P0_ALTSEL1_P7 (0x1 << 7) +#define PORT_P0_ALTSEL1_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_ALTSEL1_P7_GET(val) ((((val) & PORT_P0_ALTSEL1_P7) >> 7) & 0x1) +#define PORT_P0_ALTSEL1_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 0 Bit # (6) */ +#define PORT_P0_ALTSEL1_P6 (0x1 << 6) +#define PORT_P0_ALTSEL1_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_ALTSEL1_P6_GET(val) ((((val) & PORT_P0_ALTSEL1_P6) >> 6) & 0x1) +#define PORT_P0_ALTSEL1_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 0 Bit # (3) */ +#define PORT_P0_ALTSEL1_P3 (0x1 << 3) +#define PORT_P0_ALTSEL1_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_ALTSEL1_P3_GET(val) ((((val) & PORT_P0_ALTSEL1_P3) >> 3) & 0x1) +#define PORT_P0_ALTSEL1_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P3) | (((val) & 0x1) << 3)) + +/******************************************************************************* + * Port 0 Pull Up Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 0 Bit # (19) */ +#define PORT_P0_PUEN_P19 (0x1 << 19) +#define PORT_P0_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_PUEN_P19_GET(val) ((((val) & PORT_P0_PUEN_P19) >> 19) & 0x1) +#define PORT_P0_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 0 Bit # (18) */ +#define PORT_P0_PUEN_P18 (0x1 << 18) +#define PORT_P0_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P0_PUEN_P18_GET(val) ((((val) & PORT_P0_PUEN_P18) >> 18) & 0x1) +#define PORT_P0_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 0 Bit # (17) */ +#define PORT_P0_PUEN_P17 (0x1 << 17) +#define PORT_P0_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_PUEN_P17_GET(val) ((((val) & PORT_P0_PUEN_P17) >> 17) & 0x1) +#define PORT_P0_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 0 Bit # (16) */ +#define PORT_P0_PUEN_P16 (0x1 << 16) +#define PORT_P0_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_PUEN_P16_GET(val) ((((val) & PORT_P0_PUEN_P16) >> 16) & 0x1) +#define PORT_P0_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 0 Bit # (15) */ +#define PORT_P0_PUEN_P15 (0x1 << 15) +#define PORT_P0_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_PUEN_P15_GET(val) ((((val) & PORT_P0_PUEN_P15) >> 15) & 0x1) +#define PORT_P0_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 0 Bit # (14) */ +#define PORT_P0_PUEN_P14 (0x1 << 14) +#define PORT_P0_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_PUEN_P14_GET(val) ((((val) & PORT_P0_PUEN_P14) >> 14) & 0x1) +#define PORT_P0_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 0 Bit # (13) */ +#define PORT_P0_PUEN_P13 (0x1 << 13) +#define PORT_P0_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_PUEN_P13_GET(val) ((((val) & PORT_P0_PUEN_P13) >> 13) & 0x1) +#define PORT_P0_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 0 Bit # (12) */ +#define PORT_P0_PUEN_P12 (0x1 << 12) +#define PORT_P0_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_PUEN_P12_GET(val) ((((val) & PORT_P0_PUEN_P12) >> 12) & 0x1) +#define PORT_P0_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 0 Bit # (11) */ +#define PORT_P0_PUEN_P11 (0x1 << 11) +#define PORT_P0_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_PUEN_P11_GET(val) ((((val) & PORT_P0_PUEN_P11) >> 11) & 0x1) +#define PORT_P0_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 0 Bit # (10) */ +#define PORT_P0_PUEN_P10 (0x1 << 10) +#define PORT_P0_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_PUEN_P10_GET(val) ((((val) & PORT_P0_PUEN_P10) >> 10) & 0x1) +#define PORT_P0_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 0 Bit # (9) */ +#define PORT_P0_PUEN_P9 (0x1 << 9) +#define PORT_P0_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_PUEN_P9_GET(val) ((((val) & PORT_P0_PUEN_P9) >> 9) & 0x1) +#define PORT_P0_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 0 Bit # (8) */ +#define PORT_P0_PUEN_P8 (0x1 << 8) +#define PORT_P0_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_PUEN_P8_GET(val) ((((val) & PORT_P0_PUEN_P8) >> 8) & 0x1) +#define PORT_P0_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 0 Bit # (7) */ +#define PORT_P0_PUEN_P7 (0x1 << 7) +#define PORT_P0_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_PUEN_P7_GET(val) ((((val) & PORT_P0_PUEN_P7) >> 7) & 0x1) +#define PORT_P0_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 0 Bit # (6) */ +#define PORT_P0_PUEN_P6 (0x1 << 6) +#define PORT_P0_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_PUEN_P6_GET(val) ((((val) & PORT_P0_PUEN_P6) >> 6) & 0x1) +#define PORT_P0_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 0 Bit # (5) */ +#define PORT_P0_PUEN_P5 (0x1 << 5) +#define PORT_P0_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P0_PUEN_P5_GET(val) ((((val) & PORT_P0_PUEN_P5) >> 5) & 0x1) +#define PORT_P0_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 0 Bit # (4) */ +#define PORT_P0_PUEN_P4 (0x1 << 4) +#define PORT_P0_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P0_PUEN_P4_GET(val) ((((val) & PORT_P0_PUEN_P4) >> 4) & 0x1) +#define PORT_P0_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 0 Bit # (3) */ +#define PORT_P0_PUEN_P3 (0x1 << 3) +#define PORT_P0_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_PUEN_P3_GET(val) ((((val) & PORT_P0_PUEN_P3) >> 3) & 0x1) +#define PORT_P0_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 0 Bit # (2) */ +#define PORT_P0_PUEN_P2 (0x1 << 2) +#define PORT_P0_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P0_PUEN_P2_GET(val) ((((val) & PORT_P0_PUEN_P2) >> 2) & 0x1) +#define PORT_P0_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 0 Bit # (1) */ +#define PORT_P0_PUEN_P1 (0x1 << 1) +#define PORT_P0_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P0_PUEN_P1_GET(val) ((((val) & PORT_P0_PUEN_P1) >> 1) & 0x1) +#define PORT_P0_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 0 Bit # (0) */ +#define PORT_P0_PUEN_P0 (0x1) +#define PORT_P0_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P0_PUEN_P0_GET(val) ((((val) & PORT_P0_PUEN_P0) >> 0) & 0x1) +#define PORT_P0_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * External Interrupt Control Register 0 + ******************************************************************************/ + +/* Type of Level or Edge Detection of EXINT16 (19) */ +#define PORT_P0_EXINTCR0_EXINT16 (0x1 << 19) +#define PORT_P0_EXINTCR0_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_EXINTCR0_EXINT16_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT16) >> 19) & 0x1) +#define PORT_P0_EXINTCR0_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT16) | (((val) & 0x1) << 19)) +/* Type of Level or Edge Detection of EXINT10 (17) */ +#define PORT_P0_EXINTCR0_EXINT10 (0x1 << 17) +#define PORT_P0_EXINTCR0_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_EXINTCR0_EXINT10_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT10) >> 17) & 0x1) +#define PORT_P0_EXINTCR0_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT10) | (((val) & 0x1) << 17)) +/* Type of Level or Edge Detection of EXINT9 (16) */ +#define PORT_P0_EXINTCR0_EXINT9 (0x1 << 16) +#define PORT_P0_EXINTCR0_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_EXINTCR0_EXINT9_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT9) >> 16) & 0x1) +#define PORT_P0_EXINTCR0_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT9) | (((val) & 0x1) << 16)) +/* Type of Level or Edge Detection of EXINT8 (15) */ +#define PORT_P0_EXINTCR0_EXINT8 (0x1 << 15) +#define PORT_P0_EXINTCR0_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_EXINTCR0_EXINT8_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT8) >> 15) & 0x1) +#define PORT_P0_EXINTCR0_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT8) | (((val) & 0x1) << 15)) +/* Type of Level or Edge Detection of EXINT7 (14) */ +#define PORT_P0_EXINTCR0_EXINT7 (0x1 << 14) +#define PORT_P0_EXINTCR0_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_EXINTCR0_EXINT7_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT7) >> 14) & 0x1) +#define PORT_P0_EXINTCR0_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT7) | (((val) & 0x1) << 14)) +/* Type of Level or Edge Detection of EXINT6 (13) */ +#define PORT_P0_EXINTCR0_EXINT6 (0x1 << 13) +#define PORT_P0_EXINTCR0_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_EXINTCR0_EXINT6_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT6) >> 13) & 0x1) +#define PORT_P0_EXINTCR0_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT6) | (((val) & 0x1) << 13)) +/* Type of Level or Edge Detection of EXINT5 (12) */ +#define PORT_P0_EXINTCR0_EXINT5 (0x1 << 12) +#define PORT_P0_EXINTCR0_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_EXINTCR0_EXINT5_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT5) >> 12) & 0x1) +#define PORT_P0_EXINTCR0_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT5) | (((val) & 0x1) << 12)) +/* Type of Level or Edge Detection of EXINT4 (11) */ +#define PORT_P0_EXINTCR0_EXINT4 (0x1 << 11) +#define PORT_P0_EXINTCR0_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_EXINTCR0_EXINT4_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT4) >> 11) & 0x1) +#define PORT_P0_EXINTCR0_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT4) | (((val) & 0x1) << 11)) +/* Type of Level or Edge Detection of EXINT3 (10) */ +#define PORT_P0_EXINTCR0_EXINT3 (0x1 << 10) +#define PORT_P0_EXINTCR0_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_EXINTCR0_EXINT3_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT3) >> 10) & 0x1) +#define PORT_P0_EXINTCR0_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT3) | (((val) & 0x1) << 10)) +/* Type of Level or Edge Detection of EXINT2 (9) */ +#define PORT_P0_EXINTCR0_EXINT2 (0x1 << 9) +#define PORT_P0_EXINTCR0_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_EXINTCR0_EXINT2_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT2) >> 9) & 0x1) +#define PORT_P0_EXINTCR0_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT2) | (((val) & 0x1) << 9)) +/* Type of Level or Edge Detection of EXINT1 (8) */ +#define PORT_P0_EXINTCR0_EXINT1 (0x1 << 8) +#define PORT_P0_EXINTCR0_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_EXINTCR0_EXINT1_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT1) >> 8) & 0x1) +#define PORT_P0_EXINTCR0_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT1) | (((val) & 0x1) << 8)) +/* Type of Level or Edge Detection of EXINT0 (7) */ +#define PORT_P0_EXINTCR0_EXINT0 (0x1 << 7) +#define PORT_P0_EXINTCR0_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_EXINTCR0_EXINT0_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT0) >> 7) & 0x1) +#define PORT_P0_EXINTCR0_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT0) | (((val) & 0x1) << 7)) + +/******************************************************************************* + * External Interrupt Control Register 1 + ******************************************************************************/ + +/* Type of Level or Edge Detection of EXINT16 (19) */ +#define PORT_P0_EXINTCR1_EXINT16 (0x1 << 19) +#define PORT_P0_EXINTCR1_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_EXINTCR1_EXINT16_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT16) >> 19) & 0x1) +#define PORT_P0_EXINTCR1_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT16) | (((val) & 0x1) << 19)) +/* Type of Level or Edge Detection of EXINT10 (17) */ +#define PORT_P0_EXINTCR1_EXINT10 (0x1 << 17) +#define PORT_P0_EXINTCR1_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_EXINTCR1_EXINT10_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT10) >> 17) & 0x1) +#define PORT_P0_EXINTCR1_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT10) | (((val) & 0x1) << 17)) +/* Type of Level or Edge Detection of EXINT9 (16) */ +#define PORT_P0_EXINTCR1_EXINT9 (0x1 << 16) +#define PORT_P0_EXINTCR1_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_EXINTCR1_EXINT9_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT9) >> 16) & 0x1) +#define PORT_P0_EXINTCR1_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT9) | (((val) & 0x1) << 16)) +/* Type of Level or Edge Detection of EXINT8 (15) */ +#define PORT_P0_EXINTCR1_EXINT8 (0x1 << 15) +#define PORT_P0_EXINTCR1_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_EXINTCR1_EXINT8_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT8) >> 15) & 0x1) +#define PORT_P0_EXINTCR1_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT8) | (((val) & 0x1) << 15)) +/* Type of Level or Edge Detection of EXINT7 (14) */ +#define PORT_P0_EXINTCR1_EXINT7 (0x1 << 14) +#define PORT_P0_EXINTCR1_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_EXINTCR1_EXINT7_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT7) >> 14) & 0x1) +#define PORT_P0_EXINTCR1_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT7) | (((val) & 0x1) << 14)) +/* Type of Level or Edge Detection of EXINT6 (13) */ +#define PORT_P0_EXINTCR1_EXINT6 (0x1 << 13) +#define PORT_P0_EXINTCR1_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_EXINTCR1_EXINT6_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT6) >> 13) & 0x1) +#define PORT_P0_EXINTCR1_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT6) | (((val) & 0x1) << 13)) +/* Type of Level or Edge Detection of EXINT5 (12) */ +#define PORT_P0_EXINTCR1_EXINT5 (0x1 << 12) +#define PORT_P0_EXINTCR1_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_EXINTCR1_EXINT5_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT5) >> 12) & 0x1) +#define PORT_P0_EXINTCR1_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT5) | (((val) & 0x1) << 12)) +/* Type of Level or Edge Detection of EXINT4 (11) */ +#define PORT_P0_EXINTCR1_EXINT4 (0x1 << 11) +#define PORT_P0_EXINTCR1_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_EXINTCR1_EXINT4_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT4) >> 11) & 0x1) +#define PORT_P0_EXINTCR1_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT4) | (((val) & 0x1) << 11)) +/* Type of Level or Edge Detection of EXINT3 (10) */ +#define PORT_P0_EXINTCR1_EXINT3 (0x1 << 10) +#define PORT_P0_EXINTCR1_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_EXINTCR1_EXINT3_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT3) >> 10) & 0x1) +#define PORT_P0_EXINTCR1_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT3) | (((val) & 0x1) << 10)) +/* Type of Level or Edge Detection of EXINT2 (9) */ +#define PORT_P0_EXINTCR1_EXINT2 (0x1 << 9) +#define PORT_P0_EXINTCR1_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_EXINTCR1_EXINT2_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT2) >> 9) & 0x1) +#define PORT_P0_EXINTCR1_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT2) | (((val) & 0x1) << 9)) +/* Type of Level or Edge Detection of EXINT1 (8) */ +#define PORT_P0_EXINTCR1_EXINT1 (0x1 << 8) +#define PORT_P0_EXINTCR1_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_EXINTCR1_EXINT1_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT1) >> 8) & 0x1) +#define PORT_P0_EXINTCR1_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT1) | (((val) & 0x1) << 8)) +/* Type of Level or Edge Detection of EXINT0 (7) */ +#define PORT_P0_EXINTCR1_EXINT0 (0x1 << 7) +#define PORT_P0_EXINTCR1_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_EXINTCR1_EXINT0_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT0) >> 7) & 0x1) +#define PORT_P0_EXINTCR1_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT0) | (((val) & 0x1) << 7)) + +/******************************************************************************* + * P0_IRNEN Register + ******************************************************************************/ + +/* EXINT16 Interrupt Request Enable (19) */ +#define PORT_P0_IRNEN_EXINT16 (0x1 << 19) +#define PORT_P0_IRNEN_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_IRNEN_EXINT16_GET(val) ((((val) & PORT_P0_IRNEN_EXINT16) >> 19) & 0x1) +#define PORT_P0_IRNEN_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT16) | (((val) & 0x1) << 19)) +/* EXINT10 Interrupt Request Enable (17) */ +#define PORT_P0_IRNEN_EXINT10 (0x1 << 17) +#define PORT_P0_IRNEN_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_IRNEN_EXINT10_GET(val) ((((val) & PORT_P0_IRNEN_EXINT10) >> 17) & 0x1) +#define PORT_P0_IRNEN_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT10) | (((val) & 0x1) << 17)) +/* EXINT9 Interrupt Request Enable (16) */ +#define PORT_P0_IRNEN_EXINT9 (0x1 << 16) +#define PORT_P0_IRNEN_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_IRNEN_EXINT9_GET(val) ((((val) & PORT_P0_IRNEN_EXINT9) >> 16) & 0x1) +#define PORT_P0_IRNEN_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT9) | (((val) & 0x1) << 16)) +/* EXINT8 Interrupt Request Enable (15) */ +#define PORT_P0_IRNEN_EXINT8 (0x1 << 15) +#define PORT_P0_IRNEN_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_IRNEN_EXINT8_GET(val) ((((val) & PORT_P0_IRNEN_EXINT8) >> 15) & 0x1) +#define PORT_P0_IRNEN_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT8) | (((val) & 0x1) << 15)) +/* EXINT7 Interrupt Request Enable (14) */ +#define PORT_P0_IRNEN_EXINT7 (0x1 << 14) +#define PORT_P0_IRNEN_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_IRNEN_EXINT7_GET(val) ((((val) & PORT_P0_IRNEN_EXINT7) >> 14) & 0x1) +#define PORT_P0_IRNEN_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT7) | (((val) & 0x1) << 14)) +/* EXINT6 Interrupt Request Enable (13) */ +#define PORT_P0_IRNEN_EXINT6 (0x1 << 13) +#define PORT_P0_IRNEN_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_IRNEN_EXINT6_GET(val) ((((val) & PORT_P0_IRNEN_EXINT6) >> 13) & 0x1) +#define PORT_P0_IRNEN_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT6) | (((val) & 0x1) << 13)) +/* EXINT5 Interrupt Request Enable (12) */ +#define PORT_P0_IRNEN_EXINT5 (0x1 << 12) +#define PORT_P0_IRNEN_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_IRNEN_EXINT5_GET(val) ((((val) & PORT_P0_IRNEN_EXINT5) >> 12) & 0x1) +#define PORT_P0_IRNEN_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT5) | (((val) & 0x1) << 12)) +/* EXINT4 Interrupt Request Enable (11) */ +#define PORT_P0_IRNEN_EXINT4 (0x1 << 11) +#define PORT_P0_IRNEN_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_IRNEN_EXINT4_GET(val) ((((val) & PORT_P0_IRNEN_EXINT4) >> 11) & 0x1) +#define PORT_P0_IRNEN_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT4) | (((val) & 0x1) << 11)) +/* EXINT3 Interrupt Request Enable (10) */ +#define PORT_P0_IRNEN_EXINT3 (0x1 << 10) +#define PORT_P0_IRNEN_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_IRNEN_EXINT3_GET(val) ((((val) & PORT_P0_IRNEN_EXINT3) >> 10) & 0x1) +#define PORT_P0_IRNEN_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT3) | (((val) & 0x1) << 10)) +/* EXINT2 Interrupt Request Enable (9) */ +#define PORT_P0_IRNEN_EXINT2 (0x1 << 9) +#define PORT_P0_IRNEN_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_IRNEN_EXINT2_GET(val) ((((val) & PORT_P0_IRNEN_EXINT2) >> 9) & 0x1) +#define PORT_P0_IRNEN_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT2) | (((val) & 0x1) << 9)) +/* EXINT1 Interrupt Request Enable (8) */ +#define PORT_P0_IRNEN_EXINT1 (0x1 << 8) +#define PORT_P0_IRNEN_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_IRNEN_EXINT1_GET(val) ((((val) & PORT_P0_IRNEN_EXINT1) >> 8) & 0x1) +#define PORT_P0_IRNEN_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT1) | (((val) & 0x1) << 8)) +/* EXINT0 Interrupt Request Enable (7) */ +#define PORT_P0_IRNEN_EXINT0 (0x1 << 7) +#define PORT_P0_IRNEN_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_IRNEN_EXINT0_GET(val) ((((val) & PORT_P0_IRNEN_EXINT0) >> 7) & 0x1) +#define PORT_P0_IRNEN_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT0) | (((val) & 0x1) << 7)) + +/******************************************************************************* + * P0_IRNICR Register + ******************************************************************************/ + +/* EXINT16 Interrupt Request (19) */ +#define PORT_P0_IRNICR_EXINT16 (0x1 << 19) +#define PORT_P0_IRNICR_EXINT16_GET(val) ((((val) & PORT_P0_IRNICR_EXINT16) >> 19) & 0x1) +/* EXINT10 Interrupt Request (17) */ +#define PORT_P0_IRNICR_EXINT10 (0x1 << 17) +#define PORT_P0_IRNICR_EXINT10_GET(val) ((((val) & PORT_P0_IRNICR_EXINT10) >> 17) & 0x1) +/* EXINT9 Interrupt Request (16) */ +#define PORT_P0_IRNICR_EXINT9 (0x1 << 16) +#define PORT_P0_IRNICR_EXINT9_GET(val) ((((val) & PORT_P0_IRNICR_EXINT9) >> 16) & 0x1) +/* EXINT8 Interrupt Request (15) */ +#define PORT_P0_IRNICR_EXINT8 (0x1 << 15) +#define PORT_P0_IRNICR_EXINT8_GET(val) ((((val) & PORT_P0_IRNICR_EXINT8) >> 15) & 0x1) +/* EXINT7 Interrupt Request (14) */ +#define PORT_P0_IRNICR_EXINT7 (0x1 << 14) +#define PORT_P0_IRNICR_EXINT7_GET(val) ((((val) & PORT_P0_IRNICR_EXINT7) >> 14) & 0x1) +/* EXINT6 Interrupt Request (13) */ +#define PORT_P0_IRNICR_EXINT6 (0x1 << 13) +#define PORT_P0_IRNICR_EXINT6_GET(val) ((((val) & PORT_P0_IRNICR_EXINT6) >> 13) & 0x1) +/* EXINT5 Interrupt Request (12) */ +#define PORT_P0_IRNICR_EXINT5 (0x1 << 12) +#define PORT_P0_IRNICR_EXINT5_GET(val) ((((val) & PORT_P0_IRNICR_EXINT5) >> 12) & 0x1) +/* EXINT4 Interrupt Request (11) */ +#define PORT_P0_IRNICR_EXINT4 (0x1 << 11) +#define PORT_P0_IRNICR_EXINT4_GET(val) ((((val) & PORT_P0_IRNICR_EXINT4) >> 11) & 0x1) +/* EXINT3 Interrupt Request (10) */ +#define PORT_P0_IRNICR_EXINT3 (0x1 << 10) +#define PORT_P0_IRNICR_EXINT3_GET(val) ((((val) & PORT_P0_IRNICR_EXINT3) >> 10) & 0x1) +/* EXINT2 Interrupt Request (9) */ +#define PORT_P0_IRNICR_EXINT2 (0x1 << 9) +#define PORT_P0_IRNICR_EXINT2_GET(val) ((((val) & PORT_P0_IRNICR_EXINT2) >> 9) & 0x1) +/* EXINT1 Interrupt Request (8) */ +#define PORT_P0_IRNICR_EXINT1 (0x1 << 8) +#define PORT_P0_IRNICR_EXINT1_GET(val) ((((val) & PORT_P0_IRNICR_EXINT1) >> 8) & 0x1) +/* EXINT0 Interrupt Request (7) */ +#define PORT_P0_IRNICR_EXINT0 (0x1 << 7) +#define PORT_P0_IRNICR_EXINT0_GET(val) ((((val) & PORT_P0_IRNICR_EXINT0) >> 7) & 0x1) + +/******************************************************************************* + * P0_IRNCR Register + ******************************************************************************/ + +/* EXINT16 Interrupt Request (19) */ +#define PORT_P0_IRNCR_EXINT16 (0x1 << 19) +#define PORT_P0_IRNCR_EXINT16_GET(val) ((((val) & PORT_P0_IRNCR_EXINT16) >> 19) & 0x1) +/* EXINT10 Interrupt Request (17) */ +#define PORT_P0_IRNCR_EXINT10 (0x1 << 17) +#define PORT_P0_IRNCR_EXINT10_GET(val) ((((val) & PORT_P0_IRNCR_EXINT10) >> 17) & 0x1) +/* EXINT9 Interrupt Request (16) */ +#define PORT_P0_IRNCR_EXINT9 (0x1 << 16) +#define PORT_P0_IRNCR_EXINT9_GET(val) ((((val) & PORT_P0_IRNCR_EXINT9) >> 16) & 0x1) +/* EXINT8 Interrupt Request (15) */ +#define PORT_P0_IRNCR_EXINT8 (0x1 << 15) +#define PORT_P0_IRNCR_EXINT8_GET(val) ((((val) & PORT_P0_IRNCR_EXINT8) >> 15) & 0x1) +/* EXINT7 Interrupt Request (14) */ +#define PORT_P0_IRNCR_EXINT7 (0x1 << 14) +#define PORT_P0_IRNCR_EXINT7_GET(val) ((((val) & PORT_P0_IRNCR_EXINT7) >> 14) & 0x1) +/* EXINT6 Interrupt Request (13) */ +#define PORT_P0_IRNCR_EXINT6 (0x1 << 13) +#define PORT_P0_IRNCR_EXINT6_GET(val) ((((val) & PORT_P0_IRNCR_EXINT6) >> 13) & 0x1) +/* EXINT5 Interrupt Request (12) */ +#define PORT_P0_IRNCR_EXINT5 (0x1 << 12) +#define PORT_P0_IRNCR_EXINT5_GET(val) ((((val) & PORT_P0_IRNCR_EXINT5) >> 12) & 0x1) +/* EXINT4 Interrupt Request (11) */ +#define PORT_P0_IRNCR_EXINT4 (0x1 << 11) +#define PORT_P0_IRNCR_EXINT4_GET(val) ((((val) & PORT_P0_IRNCR_EXINT4) >> 11) & 0x1) +/* EXINT3 Interrupt Request (10) */ +#define PORT_P0_IRNCR_EXINT3 (0x1 << 10) +#define PORT_P0_IRNCR_EXINT3_GET(val) ((((val) & PORT_P0_IRNCR_EXINT3) >> 10) & 0x1) +/* EXINT2 Interrupt Request (9) */ +#define PORT_P0_IRNCR_EXINT2 (0x1 << 9) +#define PORT_P0_IRNCR_EXINT2_GET(val) ((((val) & PORT_P0_IRNCR_EXINT2) >> 9) & 0x1) +/* EXINT1 Interrupt Request (8) */ +#define PORT_P0_IRNCR_EXINT1 (0x1 << 8) +#define PORT_P0_IRNCR_EXINT1_GET(val) ((((val) & PORT_P0_IRNCR_EXINT1) >> 8) & 0x1) +/* EXINT0 Interrupt Request (7) */ +#define PORT_P0_IRNCR_EXINT0 (0x1 << 7) +#define PORT_P0_IRNCR_EXINT0_GET(val) ((((val) & PORT_P0_IRNCR_EXINT0) >> 7) & 0x1) + +/******************************************************************************* + * P0 External Event Detection Configuration Register + ******************************************************************************/ + +/* EXINT16 configured for Edge or Level Detection (19) */ +#define PORT_P0_IRNCFG_EXINT16 (0x1 << 19) +#define PORT_P0_IRNCFG_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_IRNCFG_EXINT16_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT16) >> 19) & 0x1) +#define PORT_P0_IRNCFG_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT16) | (((val) & 0x1) << 19)) +/* EXINT10 configured for Edge or Level Detection (17) */ +#define PORT_P0_IRNCFG_EXINT10 (0x1 << 17) +#define PORT_P0_IRNCFG_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_IRNCFG_EXINT10_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT10) >> 17) & 0x1) +#define PORT_P0_IRNCFG_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT10) | (((val) & 0x1) << 17)) +/* EXINT9 configured for Edge or Level Detection (16) */ +#define PORT_P0_IRNCFG_EXINT9 (0x1 << 16) +#define PORT_P0_IRNCFG_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_IRNCFG_EXINT9_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT9) >> 16) & 0x1) +#define PORT_P0_IRNCFG_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT9) | (((val) & 0x1) << 16)) +/* EXINT8 configured for Edge or Level Detection (15) */ +#define PORT_P0_IRNCFG_EXINT8 (0x1 << 15) +#define PORT_P0_IRNCFG_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_IRNCFG_EXINT8_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT8) >> 15) & 0x1) +#define PORT_P0_IRNCFG_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT8) | (((val) & 0x1) << 15)) +/* EXINT7 configured for Edge or Level Detection (14) */ +#define PORT_P0_IRNCFG_EXINT7 (0x1 << 14) +#define PORT_P0_IRNCFG_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_IRNCFG_EXINT7_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT7) >> 14) & 0x1) +#define PORT_P0_IRNCFG_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT7) | (((val) & 0x1) << 14)) +/* EXINT6 configured for Edge or Level Detection (13) */ +#define PORT_P0_IRNCFG_EXINT6 (0x1 << 13) +#define PORT_P0_IRNCFG_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_IRNCFG_EXINT6_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT6) >> 13) & 0x1) +#define PORT_P0_IRNCFG_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT6) | (((val) & 0x1) << 13)) +/* EXINT5 configured for Edge or Level Detection (12) */ +#define PORT_P0_IRNCFG_EXINT5 (0x1 << 12) +#define PORT_P0_IRNCFG_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_IRNCFG_EXINT5_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT5) >> 12) & 0x1) +#define PORT_P0_IRNCFG_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT5) | (((val) & 0x1) << 12)) +/* EXINT4 configured for Edge or Level Detection (11) */ +#define PORT_P0_IRNCFG_EXINT4 (0x1 << 11) +#define PORT_P0_IRNCFG_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_IRNCFG_EXINT4_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT4) >> 11) & 0x1) +#define PORT_P0_IRNCFG_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT4) | (((val) & 0x1) << 11)) +/* EXINT3 configured for Edge or Level Detection (10) */ +#define PORT_P0_IRNCFG_EXINT3 (0x1 << 10) +#define PORT_P0_IRNCFG_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_IRNCFG_EXINT3_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT3) >> 10) & 0x1) +#define PORT_P0_IRNCFG_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT3) | (((val) & 0x1) << 10)) +/* EXINT2 configured for Edge or Level Detection (9) */ +#define PORT_P0_IRNCFG_EXINT2 (0x1 << 9) +#define PORT_P0_IRNCFG_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_IRNCFG_EXINT2_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT2) >> 9) & 0x1) +#define PORT_P0_IRNCFG_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT2) | (((val) & 0x1) << 9)) +/* EXINT1 configured for Edge or Level Detection (8) */ +#define PORT_P0_IRNCFG_EXINT1 (0x1 << 8) +#define PORT_P0_IRNCFG_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_IRNCFG_EXINT1_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT1) >> 8) & 0x1) +#define PORT_P0_IRNCFG_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT1) | (((val) & 0x1) << 8)) +/* EXINT0 configured for Edge or Level Detection (7) */ +#define PORT_P0_IRNCFG_EXINT0 (0x1 << 7) +#define PORT_P0_IRNCFG_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_IRNCFG_EXINT0_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT0) >> 7) & 0x1) +#define PORT_P0_IRNCFG_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT0) | (((val) & 0x1) << 7)) + +/******************************************************************************* + * P0_IRNENSET Register + ******************************************************************************/ + +/* Set Interrupt Node Enable Flag EXINT16 (19) */ +#define PORT_P0_IRNENSET_EXINT16 (0x1 << 19) +#define PORT_P0_IRNENSET_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_IRNENSET_EXINT16_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT16) | (val) & 1) << 19) +/* Set Interrupt Node Enable Flag EXINT10 (17) */ +#define PORT_P0_IRNENSET_EXINT10 (0x1 << 17) +#define PORT_P0_IRNENSET_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_IRNENSET_EXINT10_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT10) | (val) & 1) << 17) +/* Set Interrupt Node Enable Flag EXINT9 (16) */ +#define PORT_P0_IRNENSET_EXINT9 (0x1 << 16) +#define PORT_P0_IRNENSET_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_IRNENSET_EXINT9_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT9) | (val) & 1) << 16) +/* Set Interrupt Node Enable Flag EXINT8 (15) */ +#define PORT_P0_IRNENSET_EXINT8 (0x1 << 15) +#define PORT_P0_IRNENSET_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_IRNENSET_EXINT8_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT8) | (val) & 1) << 15) +/* Set Interrupt Node Enable Flag EXINT7 (14) */ +#define PORT_P0_IRNENSET_EXINT7 (0x1 << 14) +#define PORT_P0_IRNENSET_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_IRNENSET_EXINT7_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT7) | (val) & 1) << 14) +/* Set Interrupt Node Enable Flag EXINT6 (13) */ +#define PORT_P0_IRNENSET_EXINT6 (0x1 << 13) +#define PORT_P0_IRNENSET_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_IRNENSET_EXINT6_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT6) | (val) & 1) << 13) +/* Set Interrupt Node Enable Flag EXINT5 (12) */ +#define PORT_P0_IRNENSET_EXINT5 (0x1 << 12) +#define PORT_P0_IRNENSET_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_IRNENSET_EXINT5_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT5) | (val) & 1) << 12) +/* Set Interrupt Node Enable Flag EXINT4 (11) */ +#define PORT_P0_IRNENSET_EXINT4 (0x1 << 11) +#define PORT_P0_IRNENSET_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_IRNENSET_EXINT4_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT4) | (val) & 1) << 11) +/* Set Interrupt Node Enable Flag EXINT3 (10) */ +#define PORT_P0_IRNENSET_EXINT3 (0x1 << 10) +#define PORT_P0_IRNENSET_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_IRNENSET_EXINT3_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT3) | (val) & 1) << 10) +/* Set Interrupt Node Enable Flag EXINT2 (9) */ +#define PORT_P0_IRNENSET_EXINT2 (0x1 << 9) +#define PORT_P0_IRNENSET_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_IRNENSET_EXINT2_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT2) | (val) & 1) << 9) +/* Set Interrupt Node Enable Flag EXINT1 (8) */ +#define PORT_P0_IRNENSET_EXINT1 (0x1 << 8) +#define PORT_P0_IRNENSET_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_IRNENSET_EXINT1_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT1) | (val) & 1) << 8) +/* Set Interrupt Node Enable Flag EXINT0 (7) */ +#define PORT_P0_IRNENSET_EXINT0 (0x1 << 7) +#define PORT_P0_IRNENSET_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_IRNENSET_EXINT0_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT0) | (val) & 1) << 7) + +/******************************************************************************* + * P0_IRNENCLR Register + ******************************************************************************/ + +/* Clear Interrupt Node Enable Flag EXINT16 (19) */ +#define PORT_P0_IRNENCLR_EXINT16 (0x1 << 19) +#define PORT_P0_IRNENCLR_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_IRNENCLR_EXINT16_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT16) | (val) & 1) << 19) +/* Clear Interrupt Node Enable Flag EXINT10 (17) */ +#define PORT_P0_IRNENCLR_EXINT10 (0x1 << 17) +#define PORT_P0_IRNENCLR_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_IRNENCLR_EXINT10_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT10) | (val) & 1) << 17) +/* Clear Interrupt Node Enable Flag EXINT9 (16) */ +#define PORT_P0_IRNENCLR_EXINT9 (0x1 << 16) +#define PORT_P0_IRNENCLR_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_IRNENCLR_EXINT9_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT9) | (val) & 1) << 16) +/* Clear Interrupt Node Enable Flag EXINT8 (15) */ +#define PORT_P0_IRNENCLR_EXINT8 (0x1 << 15) +#define PORT_P0_IRNENCLR_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_IRNENCLR_EXINT8_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT8) | (val) & 1) << 15) +/* Clear Interrupt Node Enable Flag EXINT7 (14) */ +#define PORT_P0_IRNENCLR_EXINT7 (0x1 << 14) +#define PORT_P0_IRNENCLR_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_IRNENCLR_EXINT7_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT7) | (val) & 1) << 14) +/* Clear Interrupt Node Enable Flag EXINT6 (13) */ +#define PORT_P0_IRNENCLR_EXINT6 (0x1 << 13) +#define PORT_P0_IRNENCLR_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_IRNENCLR_EXINT6_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT6) | (val) & 1) << 13) +/* Clear Interrupt Node Enable Flag EXINT5 (12) */ +#define PORT_P0_IRNENCLR_EXINT5 (0x1 << 12) +#define PORT_P0_IRNENCLR_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_IRNENCLR_EXINT5_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT5) | (val) & 1) << 12) +/* Clear Interrupt Node Enable Flag EXINT4 (11) */ +#define PORT_P0_IRNENCLR_EXINT4 (0x1 << 11) +#define PORT_P0_IRNENCLR_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_IRNENCLR_EXINT4_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT4) | (val) & 1) << 11) +/* Clear Interrupt Node Enable Flag EXINT3 (10) */ +#define PORT_P0_IRNENCLR_EXINT3 (0x1 << 10) +#define PORT_P0_IRNENCLR_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_IRNENCLR_EXINT3_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT3) | (val) & 1) << 10) +/* Clear Interrupt Node Enable Flag EXINT2 (9) */ +#define PORT_P0_IRNENCLR_EXINT2 (0x1 << 9) +#define PORT_P0_IRNENCLR_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_IRNENCLR_EXINT2_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT2) | (val) & 1) << 9) +/* Clear Interrupt Node Enable Flag EXINT1 (8) */ +#define PORT_P0_IRNENCLR_EXINT1 (0x1 << 8) +#define PORT_P0_IRNENCLR_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_IRNENCLR_EXINT1_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT1) | (val) & 1) << 8) +/* Clear Interrupt Node Enable Flag EXINT0 (7) */ +#define PORT_P0_IRNENCLR_EXINT0 (0x1 << 7) +#define PORT_P0_IRNENCLR_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_IRNENCLR_EXINT0_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT0) | (val) & 1) << 7) + +/******************************************************************************* + * Port 1 Data Output Register + ******************************************************************************/ + +/* Port 1 Pin # Output Value (19) */ +#define PORT_P1_OUT_P19 (0x1 << 19) +#define PORT_P1_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_OUT_P19_GET(val) ((((val) & PORT_P1_OUT_P19) >> 19) & 0x1) +#define PORT_P1_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 1 Pin # Output Value (18) */ +#define PORT_P1_OUT_P18 (0x1 << 18) +#define PORT_P1_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_OUT_P18_GET(val) ((((val) & PORT_P1_OUT_P18) >> 18) & 0x1) +#define PORT_P1_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 1 Pin # Output Value (17) */ +#define PORT_P1_OUT_P17 (0x1 << 17) +#define PORT_P1_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_OUT_P17_GET(val) ((((val) & PORT_P1_OUT_P17) >> 17) & 0x1) +#define PORT_P1_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 1 Pin # Output Value (16) */ +#define PORT_P1_OUT_P16 (0x1 << 16) +#define PORT_P1_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_OUT_P16_GET(val) ((((val) & PORT_P1_OUT_P16) >> 16) & 0x1) +#define PORT_P1_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 1 Pin # Output Value (15) */ +#define PORT_P1_OUT_P15 (0x1 << 15) +#define PORT_P1_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_OUT_P15_GET(val) ((((val) & PORT_P1_OUT_P15) >> 15) & 0x1) +#define PORT_P1_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 1 Pin # Output Value (14) */ +#define PORT_P1_OUT_P14 (0x1 << 14) +#define PORT_P1_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P1_OUT_P14_GET(val) ((((val) & PORT_P1_OUT_P14) >> 14) & 0x1) +#define PORT_P1_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 1 Pin # Output Value (13) */ +#define PORT_P1_OUT_P13 (0x1 << 13) +#define PORT_P1_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P1_OUT_P13_GET(val) ((((val) & PORT_P1_OUT_P13) >> 13) & 0x1) +#define PORT_P1_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 1 Pin # Output Value (12) */ +#define PORT_P1_OUT_P12 (0x1 << 12) +#define PORT_P1_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P1_OUT_P12_GET(val) ((((val) & PORT_P1_OUT_P12) >> 12) & 0x1) +#define PORT_P1_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 1 Pin # Output Value (11) */ +#define PORT_P1_OUT_P11 (0x1 << 11) +#define PORT_P1_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P1_OUT_P11_GET(val) ((((val) & PORT_P1_OUT_P11) >> 11) & 0x1) +#define PORT_P1_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 1 Pin # Output Value (10) */ +#define PORT_P1_OUT_P10 (0x1 << 10) +#define PORT_P1_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P1_OUT_P10_GET(val) ((((val) & PORT_P1_OUT_P10) >> 10) & 0x1) +#define PORT_P1_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 1 Pin # Output Value (9) */ +#define PORT_P1_OUT_P9 (0x1 << 9) +#define PORT_P1_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P1_OUT_P9_GET(val) ((((val) & PORT_P1_OUT_P9) >> 9) & 0x1) +#define PORT_P1_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 1 Pin # Output Value (8) */ +#define PORT_P1_OUT_P8 (0x1 << 8) +#define PORT_P1_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P1_OUT_P8_GET(val) ((((val) & PORT_P1_OUT_P8) >> 8) & 0x1) +#define PORT_P1_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 1 Pin # Output Value (7) */ +#define PORT_P1_OUT_P7 (0x1 << 7) +#define PORT_P1_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P1_OUT_P7_GET(val) ((((val) & PORT_P1_OUT_P7) >> 7) & 0x1) +#define PORT_P1_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 1 Pin # Output Value (6) */ +#define PORT_P1_OUT_P6 (0x1 << 6) +#define PORT_P1_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P1_OUT_P6_GET(val) ((((val) & PORT_P1_OUT_P6) >> 6) & 0x1) +#define PORT_P1_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 1 Pin # Output Value (5) */ +#define PORT_P1_OUT_P5 (0x1 << 5) +#define PORT_P1_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P1_OUT_P5_GET(val) ((((val) & PORT_P1_OUT_P5) >> 5) & 0x1) +#define PORT_P1_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 1 Pin # Output Value (4) */ +#define PORT_P1_OUT_P4 (0x1 << 4) +#define PORT_P1_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P1_OUT_P4_GET(val) ((((val) & PORT_P1_OUT_P4) >> 4) & 0x1) +#define PORT_P1_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 1 Pin # Output Value (3) */ +#define PORT_P1_OUT_P3 (0x1 << 3) +#define PORT_P1_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P1_OUT_P3_GET(val) ((((val) & PORT_P1_OUT_P3) >> 3) & 0x1) +#define PORT_P1_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 1 Pin # Output Value (2) */ +#define PORT_P1_OUT_P2 (0x1 << 2) +#define PORT_P1_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P1_OUT_P2_GET(val) ((((val) & PORT_P1_OUT_P2) >> 2) & 0x1) +#define PORT_P1_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 1 Pin # Output Value (1) */ +#define PORT_P1_OUT_P1 (0x1 << 1) +#define PORT_P1_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P1_OUT_P1_GET(val) ((((val) & PORT_P1_OUT_P1) >> 1) & 0x1) +#define PORT_P1_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 1 Pin # Output Value (0) */ +#define PORT_P1_OUT_P0 (0x1) +#define PORT_P1_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P1_OUT_P0_GET(val) ((((val) & PORT_P1_OUT_P0) >> 0) & 0x1) +#define PORT_P1_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 1 Data Input Register + ******************************************************************************/ + +/* Port 1 Pin # Latched Input Value (19) */ +#define PORT_P1_IN_P19 (0x1 << 19) +#define PORT_P1_IN_P19_GET(val) ((((val) & PORT_P1_IN_P19) >> 19) & 0x1) +/* Port 1 Pin # Latched Input Value (18) */ +#define PORT_P1_IN_P18 (0x1 << 18) +#define PORT_P1_IN_P18_GET(val) ((((val) & PORT_P1_IN_P18) >> 18) & 0x1) +/* Port 1 Pin # Latched Input Value (17) */ +#define PORT_P1_IN_P17 (0x1 << 17) +#define PORT_P1_IN_P17_GET(val) ((((val) & PORT_P1_IN_P17) >> 17) & 0x1) +/* Port 1 Pin # Latched Input Value (16) */ +#define PORT_P1_IN_P16 (0x1 << 16) +#define PORT_P1_IN_P16_GET(val) ((((val) & PORT_P1_IN_P16) >> 16) & 0x1) +/* Port 1 Pin # Latched Input Value (15) */ +#define PORT_P1_IN_P15 (0x1 << 15) +#define PORT_P1_IN_P15_GET(val) ((((val) & PORT_P1_IN_P15) >> 15) & 0x1) +/* Port 1 Pin # Latched Input Value (14) */ +#define PORT_P1_IN_P14 (0x1 << 14) +#define PORT_P1_IN_P14_GET(val) ((((val) & PORT_P1_IN_P14) >> 14) & 0x1) +/* Port 1 Pin # Latched Input Value (13) */ +#define PORT_P1_IN_P13 (0x1 << 13) +#define PORT_P1_IN_P13_GET(val) ((((val) & PORT_P1_IN_P13) >> 13) & 0x1) +/* Port 1 Pin # Latched Input Value (12) */ +#define PORT_P1_IN_P12 (0x1 << 12) +#define PORT_P1_IN_P12_GET(val) ((((val) & PORT_P1_IN_P12) >> 12) & 0x1) +/* Port 1 Pin # Latched Input Value (11) */ +#define PORT_P1_IN_P11 (0x1 << 11) +#define PORT_P1_IN_P11_GET(val) ((((val) & PORT_P1_IN_P11) >> 11) & 0x1) +/* Port 1 Pin # Latched Input Value (10) */ +#define PORT_P1_IN_P10 (0x1 << 10) +#define PORT_P1_IN_P10_GET(val) ((((val) & PORT_P1_IN_P10) >> 10) & 0x1) +/* Port 1 Pin # Latched Input Value (9) */ +#define PORT_P1_IN_P9 (0x1 << 9) +#define PORT_P1_IN_P9_GET(val) ((((val) & PORT_P1_IN_P9) >> 9) & 0x1) +/* Port 1 Pin # Latched Input Value (8) */ +#define PORT_P1_IN_P8 (0x1 << 8) +#define PORT_P1_IN_P8_GET(val) ((((val) & PORT_P1_IN_P8) >> 8) & 0x1) +/* Port 1 Pin # Latched Input Value (7) */ +#define PORT_P1_IN_P7 (0x1 << 7) +#define PORT_P1_IN_P7_GET(val) ((((val) & PORT_P1_IN_P7) >> 7) & 0x1) +/* Port 1 Pin # Latched Input Value (6) */ +#define PORT_P1_IN_P6 (0x1 << 6) +#define PORT_P1_IN_P6_GET(val) ((((val) & PORT_P1_IN_P6) >> 6) & 0x1) +/* Port 1 Pin # Latched Input Value (5) */ +#define PORT_P1_IN_P5 (0x1 << 5) +#define PORT_P1_IN_P5_GET(val) ((((val) & PORT_P1_IN_P5) >> 5) & 0x1) +/* Port 1 Pin # Latched Input Value (4) */ +#define PORT_P1_IN_P4 (0x1 << 4) +#define PORT_P1_IN_P4_GET(val) ((((val) & PORT_P1_IN_P4) >> 4) & 0x1) +/* Port 1 Pin # Latched Input Value (3) */ +#define PORT_P1_IN_P3 (0x1 << 3) +#define PORT_P1_IN_P3_GET(val) ((((val) & PORT_P1_IN_P3) >> 3) & 0x1) +/* Port 1 Pin # Latched Input Value (2) */ +#define PORT_P1_IN_P2 (0x1 << 2) +#define PORT_P1_IN_P2_GET(val) ((((val) & PORT_P1_IN_P2) >> 2) & 0x1) +/* Port 1 Pin # Latched Input Value (1) */ +#define PORT_P1_IN_P1 (0x1 << 1) +#define PORT_P1_IN_P1_GET(val) ((((val) & PORT_P1_IN_P1) >> 1) & 0x1) +/* Port 1 Pin # Latched Input Value (0) */ +#define PORT_P1_IN_P0 (0x1) +#define PORT_P1_IN_P0_GET(val) ((((val) & PORT_P1_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 1 Direction Register + ******************************************************************************/ + +/* Port 1 Pin #Direction Control (19) */ +#define PORT_P1_DIR_P19 (0x1 << 19) +#define PORT_P1_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_DIR_P19_GET(val) ((((val) & PORT_P1_DIR_P19) >> 19) & 0x1) +#define PORT_P1_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 1 Pin #Direction Control (18) */ +#define PORT_P1_DIR_P18 (0x1 << 18) +#define PORT_P1_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_DIR_P18_GET(val) ((((val) & PORT_P1_DIR_P18) >> 18) & 0x1) +#define PORT_P1_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 1 Pin #Direction Control (17) */ +#define PORT_P1_DIR_P17 (0x1 << 17) +#define PORT_P1_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_DIR_P17_GET(val) ((((val) & PORT_P1_DIR_P17) >> 17) & 0x1) +#define PORT_P1_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 1 Pin #Direction Control (16) */ +#define PORT_P1_DIR_P16 (0x1 << 16) +#define PORT_P1_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_DIR_P16_GET(val) ((((val) & PORT_P1_DIR_P16) >> 16) & 0x1) +#define PORT_P1_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 1 Pin #Direction Control (15) */ +#define PORT_P1_DIR_P15 (0x1 << 15) +#define PORT_P1_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_DIR_P15_GET(val) ((((val) & PORT_P1_DIR_P15) >> 15) & 0x1) +#define PORT_P1_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 1 Pin #Direction Control (14) */ +#define PORT_P1_DIR_P14 (0x1 << 14) +#define PORT_P1_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P1_DIR_P14_GET(val) ((((val) & PORT_P1_DIR_P14) >> 14) & 0x1) +#define PORT_P1_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 1 Pin #Direction Control (13) */ +#define PORT_P1_DIR_P13 (0x1 << 13) +#define PORT_P1_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P1_DIR_P13_GET(val) ((((val) & PORT_P1_DIR_P13) >> 13) & 0x1) +#define PORT_P1_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 1 Pin #Direction Control (12) */ +#define PORT_P1_DIR_P12 (0x1 << 12) +#define PORT_P1_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P1_DIR_P12_GET(val) ((((val) & PORT_P1_DIR_P12) >> 12) & 0x1) +#define PORT_P1_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 1 Pin #Direction Control (11) */ +#define PORT_P1_DIR_P11 (0x1 << 11) +#define PORT_P1_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P1_DIR_P11_GET(val) ((((val) & PORT_P1_DIR_P11) >> 11) & 0x1) +#define PORT_P1_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 1 Pin #Direction Control (10) */ +#define PORT_P1_DIR_P10 (0x1 << 10) +#define PORT_P1_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P1_DIR_P10_GET(val) ((((val) & PORT_P1_DIR_P10) >> 10) & 0x1) +#define PORT_P1_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 1 Pin #Direction Control (9) */ +#define PORT_P1_DIR_P9 (0x1 << 9) +#define PORT_P1_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P1_DIR_P9_GET(val) ((((val) & PORT_P1_DIR_P9) >> 9) & 0x1) +#define PORT_P1_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 1 Pin #Direction Control (8) */ +#define PORT_P1_DIR_P8 (0x1 << 8) +#define PORT_P1_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P1_DIR_P8_GET(val) ((((val) & PORT_P1_DIR_P8) >> 8) & 0x1) +#define PORT_P1_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 1 Pin #Direction Control (7) */ +#define PORT_P1_DIR_P7 (0x1 << 7) +#define PORT_P1_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P1_DIR_P7_GET(val) ((((val) & PORT_P1_DIR_P7) >> 7) & 0x1) +#define PORT_P1_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 1 Pin #Direction Control (6) */ +#define PORT_P1_DIR_P6 (0x1 << 6) +#define PORT_P1_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P1_DIR_P6_GET(val) ((((val) & PORT_P1_DIR_P6) >> 6) & 0x1) +#define PORT_P1_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 1 Pin #Direction Control (5) */ +#define PORT_P1_DIR_P5 (0x1 << 5) +#define PORT_P1_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P1_DIR_P5_GET(val) ((((val) & PORT_P1_DIR_P5) >> 5) & 0x1) +#define PORT_P1_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 1 Pin #Direction Control (4) */ +#define PORT_P1_DIR_P4 (0x1 << 4) +#define PORT_P1_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P1_DIR_P4_GET(val) ((((val) & PORT_P1_DIR_P4) >> 4) & 0x1) +#define PORT_P1_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 1 Pin #Direction Control (3) */ +#define PORT_P1_DIR_P3 (0x1 << 3) +#define PORT_P1_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P1_DIR_P3_GET(val) ((((val) & PORT_P1_DIR_P3) >> 3) & 0x1) +#define PORT_P1_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 1 Pin #Direction Control (2) */ +#define PORT_P1_DIR_P2 (0x1 << 2) +#define PORT_P1_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P1_DIR_P2_GET(val) ((((val) & PORT_P1_DIR_P2) >> 2) & 0x1) +#define PORT_P1_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 1 Pin #Direction Control (1) */ +#define PORT_P1_DIR_P1 (0x1 << 1) +#define PORT_P1_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P1_DIR_P1_GET(val) ((((val) & PORT_P1_DIR_P1) >> 1) & 0x1) +#define PORT_P1_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 1 Pin #Direction Control (0) */ +#define PORT_P1_DIR_P0 (0x1) +#define PORT_P1_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P1_DIR_P0_GET(val) ((((val) & PORT_P1_DIR_P0) >> 0) & 0x1) +#define PORT_P1_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 1 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 1 Bit # (19) */ +#define PORT_P1_ALTSEL0_P19 (0x1 << 19) +#define PORT_P1_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_ALTSEL0_P19_GET(val) ((((val) & PORT_P1_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P1_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 1 Bit # (18) */ +#define PORT_P1_ALTSEL0_P18 (0x1 << 18) +#define PORT_P1_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_ALTSEL0_P18_GET(val) ((((val) & PORT_P1_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P1_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 1 Bit # (17) */ +#define PORT_P1_ALTSEL0_P17 (0x1 << 17) +#define PORT_P1_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_ALTSEL0_P17_GET(val) ((((val) & PORT_P1_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P1_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 1 Bit # (16) */ +#define PORT_P1_ALTSEL0_P16 (0x1 << 16) +#define PORT_P1_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_ALTSEL0_P16_GET(val) ((((val) & PORT_P1_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P1_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 1 Bit # (15) */ +#define PORT_P1_ALTSEL0_P15 (0x1 << 15) +#define PORT_P1_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_ALTSEL0_P15_GET(val) ((((val) & PORT_P1_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P1_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 1 Bit # (14) */ +#define PORT_P1_ALTSEL0_P14 (0x1 << 14) +#define PORT_P1_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P1_ALTSEL0_P14_GET(val) ((((val) & PORT_P1_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P1_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 1 Bit # (13) */ +#define PORT_P1_ALTSEL0_P13 (0x1 << 13) +#define PORT_P1_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P1_ALTSEL0_P13_GET(val) ((((val) & PORT_P1_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P1_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 1 Bit # (12) */ +#define PORT_P1_ALTSEL0_P12 (0x1 << 12) +#define PORT_P1_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P1_ALTSEL0_P12_GET(val) ((((val) & PORT_P1_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P1_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 1 Bit # (11) */ +#define PORT_P1_ALTSEL0_P11 (0x1 << 11) +#define PORT_P1_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P1_ALTSEL0_P11_GET(val) ((((val) & PORT_P1_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P1_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 1 Bit # (10) */ +#define PORT_P1_ALTSEL0_P10 (0x1 << 10) +#define PORT_P1_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P1_ALTSEL0_P10_GET(val) ((((val) & PORT_P1_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P1_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 1 Bit # (9) */ +#define PORT_P1_ALTSEL0_P9 (0x1 << 9) +#define PORT_P1_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P1_ALTSEL0_P9_GET(val) ((((val) & PORT_P1_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P1_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 1 Bit # (8) */ +#define PORT_P1_ALTSEL0_P8 (0x1 << 8) +#define PORT_P1_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P1_ALTSEL0_P8_GET(val) ((((val) & PORT_P1_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P1_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 1 Bit # (7) */ +#define PORT_P1_ALTSEL0_P7 (0x1 << 7) +#define PORT_P1_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P1_ALTSEL0_P7_GET(val) ((((val) & PORT_P1_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P1_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 1 Bit # (6) */ +#define PORT_P1_ALTSEL0_P6 (0x1 << 6) +#define PORT_P1_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P1_ALTSEL0_P6_GET(val) ((((val) & PORT_P1_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P1_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 1 Bit # (5) */ +#define PORT_P1_ALTSEL0_P5 (0x1 << 5) +#define PORT_P1_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P1_ALTSEL0_P5_GET(val) ((((val) & PORT_P1_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P1_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 1 Bit # (4) */ +#define PORT_P1_ALTSEL0_P4 (0x1 << 4) +#define PORT_P1_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P1_ALTSEL0_P4_GET(val) ((((val) & PORT_P1_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P1_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 1 Bit # (3) */ +#define PORT_P1_ALTSEL0_P3 (0x1 << 3) +#define PORT_P1_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P1_ALTSEL0_P3_GET(val) ((((val) & PORT_P1_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P1_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 1 Bit # (2) */ +#define PORT_P1_ALTSEL0_P2 (0x1 << 2) +#define PORT_P1_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P1_ALTSEL0_P2_GET(val) ((((val) & PORT_P1_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P1_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 1 Bit # (1) */ +#define PORT_P1_ALTSEL0_P1 (0x1 << 1) +#define PORT_P1_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P1_ALTSEL0_P1_GET(val) ((((val) & PORT_P1_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P1_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 1 Bit # (0) */ +#define PORT_P1_ALTSEL0_P0 (0x1) +#define PORT_P1_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P1_ALTSEL0_P0_GET(val) ((((val) & PORT_P1_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P1_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 1 Pull Up Device Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 1 Bit # (19) */ +#define PORT_P1_PUEN_P19 (0x1 << 19) +#define PORT_P1_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_PUEN_P19_GET(val) ((((val) & PORT_P1_PUEN_P19) >> 19) & 0x1) +#define PORT_P1_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 1 Bit # (18) */ +#define PORT_P1_PUEN_P18 (0x1 << 18) +#define PORT_P1_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_PUEN_P18_GET(val) ((((val) & PORT_P1_PUEN_P18) >> 18) & 0x1) +#define PORT_P1_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 1 Bit # (17) */ +#define PORT_P1_PUEN_P17 (0x1 << 17) +#define PORT_P1_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_PUEN_P17_GET(val) ((((val) & PORT_P1_PUEN_P17) >> 17) & 0x1) +#define PORT_P1_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 1 Bit # (16) */ +#define PORT_P1_PUEN_P16 (0x1 << 16) +#define PORT_P1_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_PUEN_P16_GET(val) ((((val) & PORT_P1_PUEN_P16) >> 16) & 0x1) +#define PORT_P1_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 1 Bit # (15) */ +#define PORT_P1_PUEN_P15 (0x1 << 15) +#define PORT_P1_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_PUEN_P15_GET(val) ((((val) & PORT_P1_PUEN_P15) >> 15) & 0x1) +#define PORT_P1_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 1 Bit # (14) */ +#define PORT_P1_PUEN_P14 (0x1 << 14) +#define PORT_P1_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P1_PUEN_P14_GET(val) ((((val) & PORT_P1_PUEN_P14) >> 14) & 0x1) +#define PORT_P1_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 1 Bit # (13) */ +#define PORT_P1_PUEN_P13 (0x1 << 13) +#define PORT_P1_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P1_PUEN_P13_GET(val) ((((val) & PORT_P1_PUEN_P13) >> 13) & 0x1) +#define PORT_P1_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 1 Bit # (12) */ +#define PORT_P1_PUEN_P12 (0x1 << 12) +#define PORT_P1_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P1_PUEN_P12_GET(val) ((((val) & PORT_P1_PUEN_P12) >> 12) & 0x1) +#define PORT_P1_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 1 Bit # (11) */ +#define PORT_P1_PUEN_P11 (0x1 << 11) +#define PORT_P1_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P1_PUEN_P11_GET(val) ((((val) & PORT_P1_PUEN_P11) >> 11) & 0x1) +#define PORT_P1_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 1 Bit # (10) */ +#define PORT_P1_PUEN_P10 (0x1 << 10) +#define PORT_P1_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P1_PUEN_P10_GET(val) ((((val) & PORT_P1_PUEN_P10) >> 10) & 0x1) +#define PORT_P1_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 1 Bit # (9) */ +#define PORT_P1_PUEN_P9 (0x1 << 9) +#define PORT_P1_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P1_PUEN_P9_GET(val) ((((val) & PORT_P1_PUEN_P9) >> 9) & 0x1) +#define PORT_P1_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 1 Bit # (8) */ +#define PORT_P1_PUEN_P8 (0x1 << 8) +#define PORT_P1_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P1_PUEN_P8_GET(val) ((((val) & PORT_P1_PUEN_P8) >> 8) & 0x1) +#define PORT_P1_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 1 Bit # (7) */ +#define PORT_P1_PUEN_P7 (0x1 << 7) +#define PORT_P1_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P1_PUEN_P7_GET(val) ((((val) & PORT_P1_PUEN_P7) >> 7) & 0x1) +#define PORT_P1_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 1 Bit # (6) */ +#define PORT_P1_PUEN_P6 (0x1 << 6) +#define PORT_P1_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P1_PUEN_P6_GET(val) ((((val) & PORT_P1_PUEN_P6) >> 6) & 0x1) +#define PORT_P1_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 1 Bit # (5) */ +#define PORT_P1_PUEN_P5 (0x1 << 5) +#define PORT_P1_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P1_PUEN_P5_GET(val) ((((val) & PORT_P1_PUEN_P5) >> 5) & 0x1) +#define PORT_P1_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 1 Bit # (4) */ +#define PORT_P1_PUEN_P4 (0x1 << 4) +#define PORT_P1_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P1_PUEN_P4_GET(val) ((((val) & PORT_P1_PUEN_P4) >> 4) & 0x1) +#define PORT_P1_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 1 Bit # (3) */ +#define PORT_P1_PUEN_P3 (0x1 << 3) +#define PORT_P1_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P1_PUEN_P3_GET(val) ((((val) & PORT_P1_PUEN_P3) >> 3) & 0x1) +#define PORT_P1_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 1 Bit # (2) */ +#define PORT_P1_PUEN_P2 (0x1 << 2) +#define PORT_P1_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P1_PUEN_P2_GET(val) ((((val) & PORT_P1_PUEN_P2) >> 2) & 0x1) +#define PORT_P1_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 1 Bit # (1) */ +#define PORT_P1_PUEN_P1 (0x1 << 1) +#define PORT_P1_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P1_PUEN_P1_GET(val) ((((val) & PORT_P1_PUEN_P1) >> 1) & 0x1) +#define PORT_P1_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 1 Bit # (0) */ +#define PORT_P1_PUEN_P0 (0x1) +#define PORT_P1_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P1_PUEN_P0_GET(val) ((((val) & PORT_P1_PUEN_P0) >> 0) & 0x1) +#define PORT_P1_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * External Interrupt Control Register 0 + ******************************************************************************/ + +/* Type of Level or Edge Detection of EXINT15 (19) */ +#define PORT_P1_EXINTCR0_EXINT15 (0x1 << 19) +#define PORT_P1_EXINTCR0_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_EXINTCR0_EXINT15_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT15) >> 19) & 0x1) +#define PORT_P1_EXINTCR0_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT15) | (((val) & 0x1) << 19)) +/* Type of Level or Edge Detection of EXINT11 (18) */ +#define PORT_P1_EXINTCR0_EXINT11 (0x1 << 18) +#define PORT_P1_EXINTCR0_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_EXINTCR0_EXINT11_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT11) >> 18) & 0x1) +#define PORT_P1_EXINTCR0_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT11) | (((val) & 0x1) << 18)) +/* Type of Level or Edge Detection of EXINT12 (17) */ +#define PORT_P1_EXINTCR0_EXINT12 (0x1 << 17) +#define PORT_P1_EXINTCR0_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_EXINTCR0_EXINT12_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT12) >> 17) & 0x1) +#define PORT_P1_EXINTCR0_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT12) | (((val) & 0x1) << 17)) +/* Type of Level or Edge Detection of EXINT13 (16) */ +#define PORT_P1_EXINTCR0_EXINT13 (0x1 << 16) +#define PORT_P1_EXINTCR0_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_EXINTCR0_EXINT13_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT13) >> 16) & 0x1) +#define PORT_P1_EXINTCR0_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT13) | (((val) & 0x1) << 16)) +/* Type of Level or Edge Detection of EXINT14 (15) */ +#define PORT_P1_EXINTCR0_EXINT14 (0x1 << 15) +#define PORT_P1_EXINTCR0_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_EXINTCR0_EXINT14_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT14) >> 15) & 0x1) +#define PORT_P1_EXINTCR0_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT14) | (((val) & 0x1) << 15)) + +/******************************************************************************* + * External Interrupt Control Register 1 + ******************************************************************************/ + +/* Type of Level or Edge Detection of EXINT15 (19) */ +#define PORT_P1_EXINTCR1_EXINT15 (0x1 << 19) +#define PORT_P1_EXINTCR1_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_EXINTCR1_EXINT15_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT15) >> 19) & 0x1) +#define PORT_P1_EXINTCR1_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT15) | (((val) & 0x1) << 19)) +/* Type of Level or Edge Detection of EXINT11 (18) */ +#define PORT_P1_EXINTCR1_EXINT11 (0x1 << 18) +#define PORT_P1_EXINTCR1_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_EXINTCR1_EXINT11_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT11) >> 18) & 0x1) +#define PORT_P1_EXINTCR1_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT11) | (((val) & 0x1) << 18)) +/* Type of Level or Edge Detection of EXINT12 (17) */ +#define PORT_P1_EXINTCR1_EXINT12 (0x1 << 17) +#define PORT_P1_EXINTCR1_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_EXINTCR1_EXINT12_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT12) >> 17) & 0x1) +#define PORT_P1_EXINTCR1_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT12) | (((val) & 0x1) << 17)) +/* Type of Level or Edge Detection of EXINT13 (16) */ +#define PORT_P1_EXINTCR1_EXINT13 (0x1 << 16) +#define PORT_P1_EXINTCR1_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_EXINTCR1_EXINT13_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT13) >> 16) & 0x1) +#define PORT_P1_EXINTCR1_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT13) | (((val) & 0x1) << 16)) +/* Type of Level or Edge Detection of EXINT14 (15) */ +#define PORT_P1_EXINTCR1_EXINT14 (0x1 << 15) +#define PORT_P1_EXINTCR1_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_EXINTCR1_EXINT14_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT14) >> 15) & 0x1) +#define PORT_P1_EXINTCR1_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT14) | (((val) & 0x1) << 15)) + +/******************************************************************************* + * P1_IRNEN Register + ******************************************************************************/ + +/* EXINT15 Interrupt Request Enable (19) */ +#define PORT_P1_IRNEN_EXINT15 (0x1 << 19) +#define PORT_P1_IRNEN_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_IRNEN_EXINT15_GET(val) ((((val) & PORT_P1_IRNEN_EXINT15) >> 19) & 0x1) +#define PORT_P1_IRNEN_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT15) | (((val) & 0x1) << 19)) +/* EXINT11 Interrupt Request Enable (18) */ +#define PORT_P1_IRNEN_EXINT11 (0x1 << 18) +#define PORT_P1_IRNEN_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_IRNEN_EXINT11_GET(val) ((((val) & PORT_P1_IRNEN_EXINT11) >> 18) & 0x1) +#define PORT_P1_IRNEN_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT11) | (((val) & 0x1) << 18)) +/* EXINT12 Interrupt Request Enable (17) */ +#define PORT_P1_IRNEN_EXINT12 (0x1 << 17) +#define PORT_P1_IRNEN_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_IRNEN_EXINT12_GET(val) ((((val) & PORT_P1_IRNEN_EXINT12) >> 17) & 0x1) +#define PORT_P1_IRNEN_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT12) | (((val) & 0x1) << 17)) +/* EXINT13 Interrupt Request Enable (16) */ +#define PORT_P1_IRNEN_EXINT13 (0x1 << 16) +#define PORT_P1_IRNEN_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_IRNEN_EXINT13_GET(val) ((((val) & PORT_P1_IRNEN_EXINT13) >> 16) & 0x1) +#define PORT_P1_IRNEN_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT13) | (((val) & 0x1) << 16)) +/* EXINT14 Interrupt Request Enable (15) */ +#define PORT_P1_IRNEN_EXINT14 (0x1 << 15) +#define PORT_P1_IRNEN_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_IRNEN_EXINT14_GET(val) ((((val) & PORT_P1_IRNEN_EXINT14) >> 15) & 0x1) +#define PORT_P1_IRNEN_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT14) | (((val) & 0x1) << 15)) + +/******************************************************************************* + * P1_IRNICR Register + ******************************************************************************/ + +/* EXINT15 Interrupt Request (19) */ +#define PORT_P1_IRNICR_EXINT15 (0x1 << 19) +#define PORT_P1_IRNICR_EXINT15_GET(val) ((((val) & PORT_P1_IRNICR_EXINT15) >> 19) & 0x1) +/* EXINT11 Interrupt Request (18) */ +#define PORT_P1_IRNICR_EXINT11 (0x1 << 18) +#define PORT_P1_IRNICR_EXINT11_GET(val) ((((val) & PORT_P1_IRNICR_EXINT11) >> 18) & 0x1) +/* EXINT12 Interrupt Request (17) */ +#define PORT_P1_IRNICR_EXINT12 (0x1 << 17) +#define PORT_P1_IRNICR_EXINT12_GET(val) ((((val) & PORT_P1_IRNICR_EXINT12) >> 17) & 0x1) +/* EXINT13 Interrupt Request (16) */ +#define PORT_P1_IRNICR_EXINT13 (0x1 << 16) +#define PORT_P1_IRNICR_EXINT13_GET(val) ((((val) & PORT_P1_IRNICR_EXINT13) >> 16) & 0x1) +/* EXINT14 Interrupt Request (15) */ +#define PORT_P1_IRNICR_EXINT14 (0x1 << 15) +#define PORT_P1_IRNICR_EXINT14_GET(val) ((((val) & PORT_P1_IRNICR_EXINT14) >> 15) & 0x1) + +/******************************************************************************* + * P1_IRNCR Register + ******************************************************************************/ + +/* EXINT15 Interrupt Request (19) */ +#define PORT_P1_IRNCR_EXINT15 (0x1 << 19) +#define PORT_P1_IRNCR_EXINT15_GET(val) ((((val) & PORT_P1_IRNCR_EXINT15) >> 19) & 0x1) +/* EXINT11 Interrupt Request (18) */ +#define PORT_P1_IRNCR_EXINT11 (0x1 << 18) +#define PORT_P1_IRNCR_EXINT11_GET(val) ((((val) & PORT_P1_IRNCR_EXINT11) >> 18) & 0x1) +/* EXINT12 Interrupt Request (17) */ +#define PORT_P1_IRNCR_EXINT12 (0x1 << 17) +#define PORT_P1_IRNCR_EXINT12_GET(val) ((((val) & PORT_P1_IRNCR_EXINT12) >> 17) & 0x1) +/* EXINT13 Interrupt Request (16) */ +#define PORT_P1_IRNCR_EXINT13 (0x1 << 16) +#define PORT_P1_IRNCR_EXINT13_GET(val) ((((val) & PORT_P1_IRNCR_EXINT13) >> 16) & 0x1) +/* EXINT14 Interrupt Request (15) */ +#define PORT_P1_IRNCR_EXINT14 (0x1 << 15) +#define PORT_P1_IRNCR_EXINT14_GET(val) ((((val) & PORT_P1_IRNCR_EXINT14) >> 15) & 0x1) + +/******************************************************************************* + * P1 External Event Detection Configuration Register + ******************************************************************************/ + +/* EXINT15 configured for Edge or Level Detection (19) */ +#define PORT_P1_IRNCFG_EXINT15 (0x1 << 19) +#define PORT_P1_IRNCFG_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_IRNCFG_EXINT15_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT15) >> 19) & 0x1) +#define PORT_P1_IRNCFG_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT15) | (((val) & 0x1) << 19)) +/* EXINT11 configured for Edge or Level Detection (18) */ +#define PORT_P1_IRNCFG_EXINT11 (0x1 << 18) +#define PORT_P1_IRNCFG_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_IRNCFG_EXINT11_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT11) >> 18) & 0x1) +#define PORT_P1_IRNCFG_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT11) | (((val) & 0x1) << 18)) +/* EXINT12 configured for Edge or Level Detection (17) */ +#define PORT_P1_IRNCFG_EXINT12 (0x1 << 17) +#define PORT_P1_IRNCFG_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_IRNCFG_EXINT12_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT12) >> 17) & 0x1) +#define PORT_P1_IRNCFG_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT12) | (((val) & 0x1) << 17)) +/* EXINT13 configured for Edge or Level Detection (16) */ +#define PORT_P1_IRNCFG_EXINT13 (0x1 << 16) +#define PORT_P1_IRNCFG_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_IRNCFG_EXINT13_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT13) >> 16) & 0x1) +#define PORT_P1_IRNCFG_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT13) | (((val) & 0x1) << 16)) +/* EXINT14 configured for Edge or Level Detection (15) */ +#define PORT_P1_IRNCFG_EXINT14 (0x1 << 15) +#define PORT_P1_IRNCFG_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_IRNCFG_EXINT14_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT14) >> 15) & 0x1) +#define PORT_P1_IRNCFG_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT14) | (((val) & 0x1) << 15)) + +/******************************************************************************* + * P1_IRNENSET Register + ******************************************************************************/ + +/* Set Interrupt Node Enable Flag EXINT15 (19) */ +#define PORT_P1_IRNENSET_EXINT15 (0x1 << 19) +#define PORT_P1_IRNENSET_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_IRNENSET_EXINT15_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT15) | (val) & 1) << 19) +/* Set Interrupt Node Enable Flag EXINT11 (18) */ +#define PORT_P1_IRNENSET_EXINT11 (0x1 << 18) +#define PORT_P1_IRNENSET_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_IRNENSET_EXINT11_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT11) | (val) & 1) << 18) +/* Set Interrupt Node Enable Flag EXINT12 (17) */ +#define PORT_P1_IRNENSET_EXINT12 (0x1 << 17) +#define PORT_P1_IRNENSET_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_IRNENSET_EXINT12_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT12) | (val) & 1) << 17) +/* Set Interrupt Node Enable Flag EXINT13 (16) */ +#define PORT_P1_IRNENSET_EXINT13 (0x1 << 16) +#define PORT_P1_IRNENSET_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_IRNENSET_EXINT13_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT13) | (val) & 1) << 16) +/* Set Interrupt Node Enable Flag EXINT14 (15) */ +#define PORT_P1_IRNENSET_EXINT14 (0x1 << 15) +#define PORT_P1_IRNENSET_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_IRNENSET_EXINT14_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT14) | (val) & 1) << 15) + +/******************************************************************************* + * P1_IRNENCLR Register + ******************************************************************************/ + +/* Clear Interrupt Node Enable Flag EXINT15 (19) */ +#define PORT_P1_IRNENCLR_EXINT15 (0x1 << 19) +#define PORT_P1_IRNENCLR_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_IRNENCLR_EXINT15_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT15) | (val) & 1) << 19) +/* Clear Interrupt Node Enable Flag EXINT11 (18) */ +#define PORT_P1_IRNENCLR_EXINT11 (0x1 << 18) +#define PORT_P1_IRNENCLR_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_IRNENCLR_EXINT11_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT11) | (val) & 1) << 18) +/* Clear Interrupt Node Enable Flag EXINT12 (17) */ +#define PORT_P1_IRNENCLR_EXINT12 (0x1 << 17) +#define PORT_P1_IRNENCLR_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_IRNENCLR_EXINT12_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT12) | (val) & 1) << 17) +/* Clear Interrupt Node Enable Flag EXINT13 (16) */ +#define PORT_P1_IRNENCLR_EXINT13 (0x1 << 16) +#define PORT_P1_IRNENCLR_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_IRNENCLR_EXINT13_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT13) | (val) & 1) << 16) +/* Clear Interrupt Node Enable Flag EXINT14 (15) */ +#define PORT_P1_IRNENCLR_EXINT14 (0x1 << 15) +#define PORT_P1_IRNENCLR_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_IRNENCLR_EXINT14_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT14) | (val) & 1) << 15) + +/******************************************************************************* + * Port 2 Data Output Register + ******************************************************************************/ + +/* Port 2 Pin # Output Value (19) */ +#define PORT_P2_OUT_P19 (0x1 << 19) +#define PORT_P2_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P2_OUT_P19_GET(val) ((((val) & PORT_P2_OUT_P19) >> 19) & 0x1) +#define PORT_P2_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 2 Pin # Output Value (18) */ +#define PORT_P2_OUT_P18 (0x1 << 18) +#define PORT_P2_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P2_OUT_P18_GET(val) ((((val) & PORT_P2_OUT_P18) >> 18) & 0x1) +#define PORT_P2_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 2 Pin # Output Value (17) */ +#define PORT_P2_OUT_P17 (0x1 << 17) +#define PORT_P2_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P2_OUT_P17_GET(val) ((((val) & PORT_P2_OUT_P17) >> 17) & 0x1) +#define PORT_P2_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 2 Pin # Output Value (16) */ +#define PORT_P2_OUT_P16 (0x1 << 16) +#define PORT_P2_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P2_OUT_P16_GET(val) ((((val) & PORT_P2_OUT_P16) >> 16) & 0x1) +#define PORT_P2_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 2 Pin # Output Value (15) */ +#define PORT_P2_OUT_P15 (0x1 << 15) +#define PORT_P2_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P2_OUT_P15_GET(val) ((((val) & PORT_P2_OUT_P15) >> 15) & 0x1) +#define PORT_P2_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 2 Pin # Output Value (14) */ +#define PORT_P2_OUT_P14 (0x1 << 14) +#define PORT_P2_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P2_OUT_P14_GET(val) ((((val) & PORT_P2_OUT_P14) >> 14) & 0x1) +#define PORT_P2_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 2 Pin # Output Value (13) */ +#define PORT_P2_OUT_P13 (0x1 << 13) +#define PORT_P2_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P2_OUT_P13_GET(val) ((((val) & PORT_P2_OUT_P13) >> 13) & 0x1) +#define PORT_P2_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 2 Pin # Output Value (12) */ +#define PORT_P2_OUT_P12 (0x1 << 12) +#define PORT_P2_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P2_OUT_P12_GET(val) ((((val) & PORT_P2_OUT_P12) >> 12) & 0x1) +#define PORT_P2_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 2 Pin # Output Value (11) */ +#define PORT_P2_OUT_P11 (0x1 << 11) +#define PORT_P2_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P2_OUT_P11_GET(val) ((((val) & PORT_P2_OUT_P11) >> 11) & 0x1) +#define PORT_P2_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 2 Pin # Output Value (10) */ +#define PORT_P2_OUT_P10 (0x1 << 10) +#define PORT_P2_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P2_OUT_P10_GET(val) ((((val) & PORT_P2_OUT_P10) >> 10) & 0x1) +#define PORT_P2_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 2 Pin # Output Value (9) */ +#define PORT_P2_OUT_P9 (0x1 << 9) +#define PORT_P2_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P2_OUT_P9_GET(val) ((((val) & PORT_P2_OUT_P9) >> 9) & 0x1) +#define PORT_P2_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 2 Pin # Output Value (8) */ +#define PORT_P2_OUT_P8 (0x1 << 8) +#define PORT_P2_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P2_OUT_P8_GET(val) ((((val) & PORT_P2_OUT_P8) >> 8) & 0x1) +#define PORT_P2_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 2 Pin # Output Value (7) */ +#define PORT_P2_OUT_P7 (0x1 << 7) +#define PORT_P2_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P2_OUT_P7_GET(val) ((((val) & PORT_P2_OUT_P7) >> 7) & 0x1) +#define PORT_P2_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 2 Pin # Output Value (6) */ +#define PORT_P2_OUT_P6 (0x1 << 6) +#define PORT_P2_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P2_OUT_P6_GET(val) ((((val) & PORT_P2_OUT_P6) >> 6) & 0x1) +#define PORT_P2_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 2 Pin # Output Value (5) */ +#define PORT_P2_OUT_P5 (0x1 << 5) +#define PORT_P2_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P2_OUT_P5_GET(val) ((((val) & PORT_P2_OUT_P5) >> 5) & 0x1) +#define PORT_P2_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 2 Pin # Output Value (4) */ +#define PORT_P2_OUT_P4 (0x1 << 4) +#define PORT_P2_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P2_OUT_P4_GET(val) ((((val) & PORT_P2_OUT_P4) >> 4) & 0x1) +#define PORT_P2_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 2 Pin # Output Value (3) */ +#define PORT_P2_OUT_P3 (0x1 << 3) +#define PORT_P2_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P2_OUT_P3_GET(val) ((((val) & PORT_P2_OUT_P3) >> 3) & 0x1) +#define PORT_P2_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 2 Pin # Output Value (2) */ +#define PORT_P2_OUT_P2 (0x1 << 2) +#define PORT_P2_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P2_OUT_P2_GET(val) ((((val) & PORT_P2_OUT_P2) >> 2) & 0x1) +#define PORT_P2_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 2 Pin # Output Value (1) */ +#define PORT_P2_OUT_P1 (0x1 << 1) +#define PORT_P2_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P2_OUT_P1_GET(val) ((((val) & PORT_P2_OUT_P1) >> 1) & 0x1) +#define PORT_P2_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 2 Pin # Output Value (0) */ +#define PORT_P2_OUT_P0 (0x1) +#define PORT_P2_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P2_OUT_P0_GET(val) ((((val) & PORT_P2_OUT_P0) >> 0) & 0x1) +#define PORT_P2_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 2 Data Input Register + ******************************************************************************/ + +/* Port 2 Pin # Latched Input Value (19) */ +#define PORT_P2_IN_P19 (0x1 << 19) +#define PORT_P2_IN_P19_GET(val) ((((val) & PORT_P2_IN_P19) >> 19) & 0x1) +/* Port 2 Pin # Latched Input Value (18) */ +#define PORT_P2_IN_P18 (0x1 << 18) +#define PORT_P2_IN_P18_GET(val) ((((val) & PORT_P2_IN_P18) >> 18) & 0x1) +/* Port 2 Pin # Latched Input Value (17) */ +#define PORT_P2_IN_P17 (0x1 << 17) +#define PORT_P2_IN_P17_GET(val) ((((val) & PORT_P2_IN_P17) >> 17) & 0x1) +/* Port 2 Pin # Latched Input Value (16) */ +#define PORT_P2_IN_P16 (0x1 << 16) +#define PORT_P2_IN_P16_GET(val) ((((val) & PORT_P2_IN_P16) >> 16) & 0x1) +/* Port 2 Pin # Latched Input Value (15) */ +#define PORT_P2_IN_P15 (0x1 << 15) +#define PORT_P2_IN_P15_GET(val) ((((val) & PORT_P2_IN_P15) >> 15) & 0x1) +/* Port 2 Pin # Latched Input Value (14) */ +#define PORT_P2_IN_P14 (0x1 << 14) +#define PORT_P2_IN_P14_GET(val) ((((val) & PORT_P2_IN_P14) >> 14) & 0x1) +/* Port 2 Pin # Latched Input Value (13) */ +#define PORT_P2_IN_P13 (0x1 << 13) +#define PORT_P2_IN_P13_GET(val) ((((val) & PORT_P2_IN_P13) >> 13) & 0x1) +/* Port 2 Pin # Latched Input Value (12) */ +#define PORT_P2_IN_P12 (0x1 << 12) +#define PORT_P2_IN_P12_GET(val) ((((val) & PORT_P2_IN_P12) >> 12) & 0x1) +/* Port 2 Pin # Latched Input Value (11) */ +#define PORT_P2_IN_P11 (0x1 << 11) +#define PORT_P2_IN_P11_GET(val) ((((val) & PORT_P2_IN_P11) >> 11) & 0x1) +/* Port 2 Pin # Latched Input Value (10) */ +#define PORT_P2_IN_P10 (0x1 << 10) +#define PORT_P2_IN_P10_GET(val) ((((val) & PORT_P2_IN_P10) >> 10) & 0x1) +/* Port 2 Pin # Latched Input Value (9) */ +#define PORT_P2_IN_P9 (0x1 << 9) +#define PORT_P2_IN_P9_GET(val) ((((val) & PORT_P2_IN_P9) >> 9) & 0x1) +/* Port 2 Pin # Latched Input Value (8) */ +#define PORT_P2_IN_P8 (0x1 << 8) +#define PORT_P2_IN_P8_GET(val) ((((val) & PORT_P2_IN_P8) >> 8) & 0x1) +/* Port 2 Pin # Latched Input Value (7) */ +#define PORT_P2_IN_P7 (0x1 << 7) +#define PORT_P2_IN_P7_GET(val) ((((val) & PORT_P2_IN_P7) >> 7) & 0x1) +/* Port 2 Pin # Latched Input Value (6) */ +#define PORT_P2_IN_P6 (0x1 << 6) +#define PORT_P2_IN_P6_GET(val) ((((val) & PORT_P2_IN_P6) >> 6) & 0x1) +/* Port 2 Pin # Latched Input Value (5) */ +#define PORT_P2_IN_P5 (0x1 << 5) +#define PORT_P2_IN_P5_GET(val) ((((val) & PORT_P2_IN_P5) >> 5) & 0x1) +/* Port 2 Pin # Latched Input Value (4) */ +#define PORT_P2_IN_P4 (0x1 << 4) +#define PORT_P2_IN_P4_GET(val) ((((val) & PORT_P2_IN_P4) >> 4) & 0x1) +/* Port 2 Pin # Latched Input Value (3) */ +#define PORT_P2_IN_P3 (0x1 << 3) +#define PORT_P2_IN_P3_GET(val) ((((val) & PORT_P2_IN_P3) >> 3) & 0x1) +/* Port 2 Pin # Latched Input Value (2) */ +#define PORT_P2_IN_P2 (0x1 << 2) +#define PORT_P2_IN_P2_GET(val) ((((val) & PORT_P2_IN_P2) >> 2) & 0x1) +/* Port 2 Pin # Latched Input Value (1) */ +#define PORT_P2_IN_P1 (0x1 << 1) +#define PORT_P2_IN_P1_GET(val) ((((val) & PORT_P2_IN_P1) >> 1) & 0x1) +/* Port 2 Pin # Latched Input Value (0) */ +#define PORT_P2_IN_P0 (0x1) +#define PORT_P2_IN_P0_GET(val) ((((val) & PORT_P2_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 2 Direction Register + ******************************************************************************/ + +/* Port 2 Pin #Direction Control (19) */ +#define PORT_P2_DIR_P19 (0x1 << 19) +#define PORT_P2_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P2_DIR_P19_GET(val) ((((val) & PORT_P2_DIR_P19) >> 19) & 0x1) +#define PORT_P2_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 2 Pin #Direction Control (18) */ +#define PORT_P2_DIR_P18 (0x1 << 18) +#define PORT_P2_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P2_DIR_P18_GET(val) ((((val) & PORT_P2_DIR_P18) >> 18) & 0x1) +#define PORT_P2_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 2 Pin #Direction Control (17) */ +#define PORT_P2_DIR_P17 (0x1 << 17) +#define PORT_P2_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P2_DIR_P17_GET(val) ((((val) & PORT_P2_DIR_P17) >> 17) & 0x1) +#define PORT_P2_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 2 Pin #Direction Control (16) */ +#define PORT_P2_DIR_P16 (0x1 << 16) +#define PORT_P2_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P2_DIR_P16_GET(val) ((((val) & PORT_P2_DIR_P16) >> 16) & 0x1) +#define PORT_P2_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 2 Pin #Direction Control (15) */ +#define PORT_P2_DIR_P15 (0x1 << 15) +#define PORT_P2_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P2_DIR_P15_GET(val) ((((val) & PORT_P2_DIR_P15) >> 15) & 0x1) +#define PORT_P2_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 2 Pin #Direction Control (14) */ +#define PORT_P2_DIR_P14 (0x1 << 14) +#define PORT_P2_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P2_DIR_P14_GET(val) ((((val) & PORT_P2_DIR_P14) >> 14) & 0x1) +#define PORT_P2_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 2 Pin #Direction Control (13) */ +#define PORT_P2_DIR_P13 (0x1 << 13) +#define PORT_P2_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P2_DIR_P13_GET(val) ((((val) & PORT_P2_DIR_P13) >> 13) & 0x1) +#define PORT_P2_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 2 Pin #Direction Control (12) */ +#define PORT_P2_DIR_P12 (0x1 << 12) +#define PORT_P2_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P2_DIR_P12_GET(val) ((((val) & PORT_P2_DIR_P12) >> 12) & 0x1) +#define PORT_P2_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 2 Pin #Direction Control (11) */ +#define PORT_P2_DIR_P11 (0x1 << 11) +#define PORT_P2_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P2_DIR_P11_GET(val) ((((val) & PORT_P2_DIR_P11) >> 11) & 0x1) +#define PORT_P2_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 2 Pin #Direction Control (10) */ +#define PORT_P2_DIR_P10 (0x1 << 10) +#define PORT_P2_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P2_DIR_P10_GET(val) ((((val) & PORT_P2_DIR_P10) >> 10) & 0x1) +#define PORT_P2_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 2 Pin #Direction Control (9) */ +#define PORT_P2_DIR_P9 (0x1 << 9) +#define PORT_P2_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P2_DIR_P9_GET(val) ((((val) & PORT_P2_DIR_P9) >> 9) & 0x1) +#define PORT_P2_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 2 Pin #Direction Control (8) */ +#define PORT_P2_DIR_P8 (0x1 << 8) +#define PORT_P2_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P2_DIR_P8_GET(val) ((((val) & PORT_P2_DIR_P8) >> 8) & 0x1) +#define PORT_P2_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 2 Pin #Direction Control (7) */ +#define PORT_P2_DIR_P7 (0x1 << 7) +#define PORT_P2_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P2_DIR_P7_GET(val) ((((val) & PORT_P2_DIR_P7) >> 7) & 0x1) +#define PORT_P2_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 2 Pin #Direction Control (6) */ +#define PORT_P2_DIR_P6 (0x1 << 6) +#define PORT_P2_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P2_DIR_P6_GET(val) ((((val) & PORT_P2_DIR_P6) >> 6) & 0x1) +#define PORT_P2_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 2 Pin #Direction Control (5) */ +#define PORT_P2_DIR_P5 (0x1 << 5) +#define PORT_P2_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P2_DIR_P5_GET(val) ((((val) & PORT_P2_DIR_P5) >> 5) & 0x1) +#define PORT_P2_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 2 Pin #Direction Control (4) */ +#define PORT_P2_DIR_P4 (0x1 << 4) +#define PORT_P2_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P2_DIR_P4_GET(val) ((((val) & PORT_P2_DIR_P4) >> 4) & 0x1) +#define PORT_P2_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 2 Pin #Direction Control (3) */ +#define PORT_P2_DIR_P3 (0x1 << 3) +#define PORT_P2_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P2_DIR_P3_GET(val) ((((val) & PORT_P2_DIR_P3) >> 3) & 0x1) +#define PORT_P2_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 2 Pin #Direction Control (2) */ +#define PORT_P2_DIR_P2 (0x1 << 2) +#define PORT_P2_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P2_DIR_P2_GET(val) ((((val) & PORT_P2_DIR_P2) >> 2) & 0x1) +#define PORT_P2_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 2 Pin #Direction Control (1) */ +#define PORT_P2_DIR_P1 (0x1 << 1) +#define PORT_P2_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P2_DIR_P1_GET(val) ((((val) & PORT_P2_DIR_P1) >> 1) & 0x1) +#define PORT_P2_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 2 Pin #Direction Control (0) */ +#define PORT_P2_DIR_P0 (0x1) +#define PORT_P2_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P2_DIR_P0_GET(val) ((((val) & PORT_P2_DIR_P0) >> 0) & 0x1) +#define PORT_P2_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 2 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 2 Bit # (19) */ +#define PORT_P2_ALTSEL0_P19 (0x1 << 19) +#define PORT_P2_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P2_ALTSEL0_P19_GET(val) ((((val) & PORT_P2_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P2_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 2 Bit # (18) */ +#define PORT_P2_ALTSEL0_P18 (0x1 << 18) +#define PORT_P2_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P2_ALTSEL0_P18_GET(val) ((((val) & PORT_P2_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P2_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 2 Bit # (17) */ +#define PORT_P2_ALTSEL0_P17 (0x1 << 17) +#define PORT_P2_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P2_ALTSEL0_P17_GET(val) ((((val) & PORT_P2_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P2_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 2 Bit # (16) */ +#define PORT_P2_ALTSEL0_P16 (0x1 << 16) +#define PORT_P2_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P2_ALTSEL0_P16_GET(val) ((((val) & PORT_P2_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P2_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 2 Bit # (15) */ +#define PORT_P2_ALTSEL0_P15 (0x1 << 15) +#define PORT_P2_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P2_ALTSEL0_P15_GET(val) ((((val) & PORT_P2_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P2_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 2 Bit # (14) */ +#define PORT_P2_ALTSEL0_P14 (0x1 << 14) +#define PORT_P2_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P2_ALTSEL0_P14_GET(val) ((((val) & PORT_P2_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P2_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 2 Bit # (13) */ +#define PORT_P2_ALTSEL0_P13 (0x1 << 13) +#define PORT_P2_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P2_ALTSEL0_P13_GET(val) ((((val) & PORT_P2_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P2_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 2 Bit # (12) */ +#define PORT_P2_ALTSEL0_P12 (0x1 << 12) +#define PORT_P2_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P2_ALTSEL0_P12_GET(val) ((((val) & PORT_P2_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P2_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 2 Bit # (11) */ +#define PORT_P2_ALTSEL0_P11 (0x1 << 11) +#define PORT_P2_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P2_ALTSEL0_P11_GET(val) ((((val) & PORT_P2_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P2_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 2 Bit # (10) */ +#define PORT_P2_ALTSEL0_P10 (0x1 << 10) +#define PORT_P2_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P2_ALTSEL0_P10_GET(val) ((((val) & PORT_P2_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P2_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 2 Bit # (9) */ +#define PORT_P2_ALTSEL0_P9 (0x1 << 9) +#define PORT_P2_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P2_ALTSEL0_P9_GET(val) ((((val) & PORT_P2_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P2_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 2 Bit # (8) */ +#define PORT_P2_ALTSEL0_P8 (0x1 << 8) +#define PORT_P2_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P2_ALTSEL0_P8_GET(val) ((((val) & PORT_P2_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P2_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 2 Bit # (7) */ +#define PORT_P2_ALTSEL0_P7 (0x1 << 7) +#define PORT_P2_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P2_ALTSEL0_P7_GET(val) ((((val) & PORT_P2_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P2_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 2 Bit # (6) */ +#define PORT_P2_ALTSEL0_P6 (0x1 << 6) +#define PORT_P2_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P2_ALTSEL0_P6_GET(val) ((((val) & PORT_P2_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P2_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 2 Bit # (5) */ +#define PORT_P2_ALTSEL0_P5 (0x1 << 5) +#define PORT_P2_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P2_ALTSEL0_P5_GET(val) ((((val) & PORT_P2_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P2_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 2 Bit # (4) */ +#define PORT_P2_ALTSEL0_P4 (0x1 << 4) +#define PORT_P2_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P2_ALTSEL0_P4_GET(val) ((((val) & PORT_P2_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P2_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 2 Bit # (3) */ +#define PORT_P2_ALTSEL0_P3 (0x1 << 3) +#define PORT_P2_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P2_ALTSEL0_P3_GET(val) ((((val) & PORT_P2_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P2_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 2 Bit # (2) */ +#define PORT_P2_ALTSEL0_P2 (0x1 << 2) +#define PORT_P2_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P2_ALTSEL0_P2_GET(val) ((((val) & PORT_P2_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P2_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 2 Bit # (1) */ +#define PORT_P2_ALTSEL0_P1 (0x1 << 1) +#define PORT_P2_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P2_ALTSEL0_P1_GET(val) ((((val) & PORT_P2_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P2_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 2 Bit # (0) */ +#define PORT_P2_ALTSEL0_P0 (0x1) +#define PORT_P2_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P2_ALTSEL0_P0_GET(val) ((((val) & PORT_P2_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P2_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 2 Pull Up Device Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 2 Bit # (19) */ +#define PORT_P2_PUEN_P19 (0x1 << 19) +#define PORT_P2_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P2_PUEN_P19_GET(val) ((((val) & PORT_P2_PUEN_P19) >> 19) & 0x1) +#define PORT_P2_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 2 Bit # (18) */ +#define PORT_P2_PUEN_P18 (0x1 << 18) +#define PORT_P2_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P2_PUEN_P18_GET(val) ((((val) & PORT_P2_PUEN_P18) >> 18) & 0x1) +#define PORT_P2_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 2 Bit # (17) */ +#define PORT_P2_PUEN_P17 (0x1 << 17) +#define PORT_P2_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P2_PUEN_P17_GET(val) ((((val) & PORT_P2_PUEN_P17) >> 17) & 0x1) +#define PORT_P2_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 2 Bit # (16) */ +#define PORT_P2_PUEN_P16 (0x1 << 16) +#define PORT_P2_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P2_PUEN_P16_GET(val) ((((val) & PORT_P2_PUEN_P16) >> 16) & 0x1) +#define PORT_P2_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 2 Bit # (15) */ +#define PORT_P2_PUEN_P15 (0x1 << 15) +#define PORT_P2_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P2_PUEN_P15_GET(val) ((((val) & PORT_P2_PUEN_P15) >> 15) & 0x1) +#define PORT_P2_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 2 Bit # (14) */ +#define PORT_P2_PUEN_P14 (0x1 << 14) +#define PORT_P2_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P2_PUEN_P14_GET(val) ((((val) & PORT_P2_PUEN_P14) >> 14) & 0x1) +#define PORT_P2_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 2 Bit # (13) */ +#define PORT_P2_PUEN_P13 (0x1 << 13) +#define PORT_P2_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P2_PUEN_P13_GET(val) ((((val) & PORT_P2_PUEN_P13) >> 13) & 0x1) +#define PORT_P2_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 2 Bit # (12) */ +#define PORT_P2_PUEN_P12 (0x1 << 12) +#define PORT_P2_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P2_PUEN_P12_GET(val) ((((val) & PORT_P2_PUEN_P12) >> 12) & 0x1) +#define PORT_P2_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 2 Bit # (11) */ +#define PORT_P2_PUEN_P11 (0x1 << 11) +#define PORT_P2_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P2_PUEN_P11_GET(val) ((((val) & PORT_P2_PUEN_P11) >> 11) & 0x1) +#define PORT_P2_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 2 Bit # (10) */ +#define PORT_P2_PUEN_P10 (0x1 << 10) +#define PORT_P2_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P2_PUEN_P10_GET(val) ((((val) & PORT_P2_PUEN_P10) >> 10) & 0x1) +#define PORT_P2_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 2 Bit # (9) */ +#define PORT_P2_PUEN_P9 (0x1 << 9) +#define PORT_P2_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P2_PUEN_P9_GET(val) ((((val) & PORT_P2_PUEN_P9) >> 9) & 0x1) +#define PORT_P2_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 2 Bit # (8) */ +#define PORT_P2_PUEN_P8 (0x1 << 8) +#define PORT_P2_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P2_PUEN_P8_GET(val) ((((val) & PORT_P2_PUEN_P8) >> 8) & 0x1) +#define PORT_P2_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 2 Bit # (7) */ +#define PORT_P2_PUEN_P7 (0x1 << 7) +#define PORT_P2_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P2_PUEN_P7_GET(val) ((((val) & PORT_P2_PUEN_P7) >> 7) & 0x1) +#define PORT_P2_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 2 Bit # (6) */ +#define PORT_P2_PUEN_P6 (0x1 << 6) +#define PORT_P2_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P2_PUEN_P6_GET(val) ((((val) & PORT_P2_PUEN_P6) >> 6) & 0x1) +#define PORT_P2_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 2 Bit # (5) */ +#define PORT_P2_PUEN_P5 (0x1 << 5) +#define PORT_P2_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P2_PUEN_P5_GET(val) ((((val) & PORT_P2_PUEN_P5) >> 5) & 0x1) +#define PORT_P2_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 2 Bit # (4) */ +#define PORT_P2_PUEN_P4 (0x1 << 4) +#define PORT_P2_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P2_PUEN_P4_GET(val) ((((val) & PORT_P2_PUEN_P4) >> 4) & 0x1) +#define PORT_P2_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 2 Bit # (3) */ +#define PORT_P2_PUEN_P3 (0x1 << 3) +#define PORT_P2_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P2_PUEN_P3_GET(val) ((((val) & PORT_P2_PUEN_P3) >> 3) & 0x1) +#define PORT_P2_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 2 Bit # (2) */ +#define PORT_P2_PUEN_P2 (0x1 << 2) +#define PORT_P2_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P2_PUEN_P2_GET(val) ((((val) & PORT_P2_PUEN_P2) >> 2) & 0x1) +#define PORT_P2_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 2 Bit # (1) */ +#define PORT_P2_PUEN_P1 (0x1 << 1) +#define PORT_P2_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P2_PUEN_P1_GET(val) ((((val) & PORT_P2_PUEN_P1) >> 1) & 0x1) +#define PORT_P2_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 2 Bit # (0) */ +#define PORT_P2_PUEN_P0 (0x1) +#define PORT_P2_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P2_PUEN_P0_GET(val) ((((val) & PORT_P2_PUEN_P0) >> 0) & 0x1) +#define PORT_P2_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 3 Data Output Register + ******************************************************************************/ + +/* Port 3 Pin # Output Value (19) */ +#define PORT_P3_OUT_P19 (0x1 << 19) +#define PORT_P3_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P3_OUT_P19_GET(val) ((((val) & PORT_P3_OUT_P19) >> 19) & 0x1) +#define PORT_P3_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 3 Pin # Output Value (18) */ +#define PORT_P3_OUT_P18 (0x1 << 18) +#define PORT_P3_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P3_OUT_P18_GET(val) ((((val) & PORT_P3_OUT_P18) >> 18) & 0x1) +#define PORT_P3_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 3 Pin # Output Value (17) */ +#define PORT_P3_OUT_P17 (0x1 << 17) +#define PORT_P3_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P3_OUT_P17_GET(val) ((((val) & PORT_P3_OUT_P17) >> 17) & 0x1) +#define PORT_P3_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 3 Pin # Output Value (16) */ +#define PORT_P3_OUT_P16 (0x1 << 16) +#define PORT_P3_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P3_OUT_P16_GET(val) ((((val) & PORT_P3_OUT_P16) >> 16) & 0x1) +#define PORT_P3_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 3 Pin # Output Value (15) */ +#define PORT_P3_OUT_P15 (0x1 << 15) +#define PORT_P3_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P3_OUT_P15_GET(val) ((((val) & PORT_P3_OUT_P15) >> 15) & 0x1) +#define PORT_P3_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 3 Pin # Output Value (14) */ +#define PORT_P3_OUT_P14 (0x1 << 14) +#define PORT_P3_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P3_OUT_P14_GET(val) ((((val) & PORT_P3_OUT_P14) >> 14) & 0x1) +#define PORT_P3_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 3 Pin # Output Value (13) */ +#define PORT_P3_OUT_P13 (0x1 << 13) +#define PORT_P3_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P3_OUT_P13_GET(val) ((((val) & PORT_P3_OUT_P13) >> 13) & 0x1) +#define PORT_P3_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 3 Pin # Output Value (12) */ +#define PORT_P3_OUT_P12 (0x1 << 12) +#define PORT_P3_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P3_OUT_P12_GET(val) ((((val) & PORT_P3_OUT_P12) >> 12) & 0x1) +#define PORT_P3_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 3 Pin # Output Value (11) */ +#define PORT_P3_OUT_P11 (0x1 << 11) +#define PORT_P3_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P3_OUT_P11_GET(val) ((((val) & PORT_P3_OUT_P11) >> 11) & 0x1) +#define PORT_P3_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 3 Pin # Output Value (10) */ +#define PORT_P3_OUT_P10 (0x1 << 10) +#define PORT_P3_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P3_OUT_P10_GET(val) ((((val) & PORT_P3_OUT_P10) >> 10) & 0x1) +#define PORT_P3_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 3 Pin # Output Value (9) */ +#define PORT_P3_OUT_P9 (0x1 << 9) +#define PORT_P3_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P3_OUT_P9_GET(val) ((((val) & PORT_P3_OUT_P9) >> 9) & 0x1) +#define PORT_P3_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 3 Pin # Output Value (8) */ +#define PORT_P3_OUT_P8 (0x1 << 8) +#define PORT_P3_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P3_OUT_P8_GET(val) ((((val) & PORT_P3_OUT_P8) >> 8) & 0x1) +#define PORT_P3_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 3 Pin # Output Value (7) */ +#define PORT_P3_OUT_P7 (0x1 << 7) +#define PORT_P3_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P3_OUT_P7_GET(val) ((((val) & PORT_P3_OUT_P7) >> 7) & 0x1) +#define PORT_P3_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 3 Pin # Output Value (6) */ +#define PORT_P3_OUT_P6 (0x1 << 6) +#define PORT_P3_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P3_OUT_P6_GET(val) ((((val) & PORT_P3_OUT_P6) >> 6) & 0x1) +#define PORT_P3_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 3 Pin # Output Value (5) */ +#define PORT_P3_OUT_P5 (0x1 << 5) +#define PORT_P3_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P3_OUT_P5_GET(val) ((((val) & PORT_P3_OUT_P5) >> 5) & 0x1) +#define PORT_P3_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 3 Pin # Output Value (4) */ +#define PORT_P3_OUT_P4 (0x1 << 4) +#define PORT_P3_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P3_OUT_P4_GET(val) ((((val) & PORT_P3_OUT_P4) >> 4) & 0x1) +#define PORT_P3_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 3 Pin # Output Value (3) */ +#define PORT_P3_OUT_P3 (0x1 << 3) +#define PORT_P3_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P3_OUT_P3_GET(val) ((((val) & PORT_P3_OUT_P3) >> 3) & 0x1) +#define PORT_P3_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 3 Pin # Output Value (2) */ +#define PORT_P3_OUT_P2 (0x1 << 2) +#define PORT_P3_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P3_OUT_P2_GET(val) ((((val) & PORT_P3_OUT_P2) >> 2) & 0x1) +#define PORT_P3_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 3 Pin # Output Value (1) */ +#define PORT_P3_OUT_P1 (0x1 << 1) +#define PORT_P3_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P3_OUT_P1_GET(val) ((((val) & PORT_P3_OUT_P1) >> 1) & 0x1) +#define PORT_P3_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 3 Pin # Output Value (0) */ +#define PORT_P3_OUT_P0 (0x1) +#define PORT_P3_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P3_OUT_P0_GET(val) ((((val) & PORT_P3_OUT_P0) >> 0) & 0x1) +#define PORT_P3_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 3 Data Input Register + ******************************************************************************/ + +/* Port 3 Pin # Latched Input Value (19) */ +#define PORT_P3_IN_P19 (0x1 << 19) +#define PORT_P3_IN_P19_GET(val) ((((val) & PORT_P3_IN_P19) >> 19) & 0x1) +/* Port 3 Pin # Latched Input Value (18) */ +#define PORT_P3_IN_P18 (0x1 << 18) +#define PORT_P3_IN_P18_GET(val) ((((val) & PORT_P3_IN_P18) >> 18) & 0x1) +/* Port 3 Pin # Latched Input Value (17) */ +#define PORT_P3_IN_P17 (0x1 << 17) +#define PORT_P3_IN_P17_GET(val) ((((val) & PORT_P3_IN_P17) >> 17) & 0x1) +/* Port 3 Pin # Latched Input Value (16) */ +#define PORT_P3_IN_P16 (0x1 << 16) +#define PORT_P3_IN_P16_GET(val) ((((val) & PORT_P3_IN_P16) >> 16) & 0x1) +/* Port 3 Pin # Latched Input Value (15) */ +#define PORT_P3_IN_P15 (0x1 << 15) +#define PORT_P3_IN_P15_GET(val) ((((val) & PORT_P3_IN_P15) >> 15) & 0x1) +/* Port 3 Pin # Latched Input Value (14) */ +#define PORT_P3_IN_P14 (0x1 << 14) +#define PORT_P3_IN_P14_GET(val) ((((val) & PORT_P3_IN_P14) >> 14) & 0x1) +/* Port 3 Pin # Latched Input Value (13) */ +#define PORT_P3_IN_P13 (0x1 << 13) +#define PORT_P3_IN_P13_GET(val) ((((val) & PORT_P3_IN_P13) >> 13) & 0x1) +/* Port 3 Pin # Latched Input Value (12) */ +#define PORT_P3_IN_P12 (0x1 << 12) +#define PORT_P3_IN_P12_GET(val) ((((val) & PORT_P3_IN_P12) >> 12) & 0x1) +/* Port 3 Pin # Latched Input Value (11) */ +#define PORT_P3_IN_P11 (0x1 << 11) +#define PORT_P3_IN_P11_GET(val) ((((val) & PORT_P3_IN_P11) >> 11) & 0x1) +/* Port 3 Pin # Latched Input Value (10) */ +#define PORT_P3_IN_P10 (0x1 << 10) +#define PORT_P3_IN_P10_GET(val) ((((val) & PORT_P3_IN_P10) >> 10) & 0x1) +/* Port 3 Pin # Latched Input Value (9) */ +#define PORT_P3_IN_P9 (0x1 << 9) +#define PORT_P3_IN_P9_GET(val) ((((val) & PORT_P3_IN_P9) >> 9) & 0x1) +/* Port 3 Pin # Latched Input Value (8) */ +#define PORT_P3_IN_P8 (0x1 << 8) +#define PORT_P3_IN_P8_GET(val) ((((val) & PORT_P3_IN_P8) >> 8) & 0x1) +/* Port 3 Pin # Latched Input Value (7) */ +#define PORT_P3_IN_P7 (0x1 << 7) +#define PORT_P3_IN_P7_GET(val) ((((val) & PORT_P3_IN_P7) >> 7) & 0x1) +/* Port 3 Pin # Latched Input Value (6) */ +#define PORT_P3_IN_P6 (0x1 << 6) +#define PORT_P3_IN_P6_GET(val) ((((val) & PORT_P3_IN_P6) >> 6) & 0x1) +/* Port 3 Pin # Latched Input Value (5) */ +#define PORT_P3_IN_P5 (0x1 << 5) +#define PORT_P3_IN_P5_GET(val) ((((val) & PORT_P3_IN_P5) >> 5) & 0x1) +/* Port 3 Pin # Latched Input Value (4) */ +#define PORT_P3_IN_P4 (0x1 << 4) +#define PORT_P3_IN_P4_GET(val) ((((val) & PORT_P3_IN_P4) >> 4) & 0x1) +/* Port 3 Pin # Latched Input Value (3) */ +#define PORT_P3_IN_P3 (0x1 << 3) +#define PORT_P3_IN_P3_GET(val) ((((val) & PORT_P3_IN_P3) >> 3) & 0x1) +/* Port 3 Pin # Latched Input Value (2) */ +#define PORT_P3_IN_P2 (0x1 << 2) +#define PORT_P3_IN_P2_GET(val) ((((val) & PORT_P3_IN_P2) >> 2) & 0x1) +/* Port 3 Pin # Latched Input Value (1) */ +#define PORT_P3_IN_P1 (0x1 << 1) +#define PORT_P3_IN_P1_GET(val) ((((val) & PORT_P3_IN_P1) >> 1) & 0x1) +/* Port 3 Pin # Latched Input Value (0) */ +#define PORT_P3_IN_P0 (0x1) +#define PORT_P3_IN_P0_GET(val) ((((val) & PORT_P3_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 3 Direction Register + ******************************************************************************/ + +/* Port 3 Pin #Direction Control (19) */ +#define PORT_P3_DIR_P19 (0x1 << 19) +#define PORT_P3_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P3_DIR_P19_GET(val) ((((val) & PORT_P3_DIR_P19) >> 19) & 0x1) +#define PORT_P3_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 3 Pin #Direction Control (18) */ +#define PORT_P3_DIR_P18 (0x1 << 18) +#define PORT_P3_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P3_DIR_P18_GET(val) ((((val) & PORT_P3_DIR_P18) >> 18) & 0x1) +#define PORT_P3_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 3 Pin #Direction Control (17) */ +#define PORT_P3_DIR_P17 (0x1 << 17) +#define PORT_P3_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P3_DIR_P17_GET(val) ((((val) & PORT_P3_DIR_P17) >> 17) & 0x1) +#define PORT_P3_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 3 Pin #Direction Control (16) */ +#define PORT_P3_DIR_P16 (0x1 << 16) +#define PORT_P3_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P3_DIR_P16_GET(val) ((((val) & PORT_P3_DIR_P16) >> 16) & 0x1) +#define PORT_P3_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 3 Pin #Direction Control (15) */ +#define PORT_P3_DIR_P15 (0x1 << 15) +#define PORT_P3_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P3_DIR_P15_GET(val) ((((val) & PORT_P3_DIR_P15) >> 15) & 0x1) +#define PORT_P3_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 3 Pin #Direction Control (14) */ +#define PORT_P3_DIR_P14 (0x1 << 14) +#define PORT_P3_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P3_DIR_P14_GET(val) ((((val) & PORT_P3_DIR_P14) >> 14) & 0x1) +#define PORT_P3_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 3 Pin #Direction Control (13) */ +#define PORT_P3_DIR_P13 (0x1 << 13) +#define PORT_P3_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P3_DIR_P13_GET(val) ((((val) & PORT_P3_DIR_P13) >> 13) & 0x1) +#define PORT_P3_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 3 Pin #Direction Control (12) */ +#define PORT_P3_DIR_P12 (0x1 << 12) +#define PORT_P3_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P3_DIR_P12_GET(val) ((((val) & PORT_P3_DIR_P12) >> 12) & 0x1) +#define PORT_P3_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 3 Pin #Direction Control (11) */ +#define PORT_P3_DIR_P11 (0x1 << 11) +#define PORT_P3_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P3_DIR_P11_GET(val) ((((val) & PORT_P3_DIR_P11) >> 11) & 0x1) +#define PORT_P3_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 3 Pin #Direction Control (10) */ +#define PORT_P3_DIR_P10 (0x1 << 10) +#define PORT_P3_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P3_DIR_P10_GET(val) ((((val) & PORT_P3_DIR_P10) >> 10) & 0x1) +#define PORT_P3_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 3 Pin #Direction Control (9) */ +#define PORT_P3_DIR_P9 (0x1 << 9) +#define PORT_P3_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P3_DIR_P9_GET(val) ((((val) & PORT_P3_DIR_P9) >> 9) & 0x1) +#define PORT_P3_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 3 Pin #Direction Control (8) */ +#define PORT_P3_DIR_P8 (0x1 << 8) +#define PORT_P3_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P3_DIR_P8_GET(val) ((((val) & PORT_P3_DIR_P8) >> 8) & 0x1) +#define PORT_P3_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 3 Pin #Direction Control (7) */ +#define PORT_P3_DIR_P7 (0x1 << 7) +#define PORT_P3_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P3_DIR_P7_GET(val) ((((val) & PORT_P3_DIR_P7) >> 7) & 0x1) +#define PORT_P3_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 3 Pin #Direction Control (6) */ +#define PORT_P3_DIR_P6 (0x1 << 6) +#define PORT_P3_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P3_DIR_P6_GET(val) ((((val) & PORT_P3_DIR_P6) >> 6) & 0x1) +#define PORT_P3_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 3 Pin #Direction Control (5) */ +#define PORT_P3_DIR_P5 (0x1 << 5) +#define PORT_P3_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P3_DIR_P5_GET(val) ((((val) & PORT_P3_DIR_P5) >> 5) & 0x1) +#define PORT_P3_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 3 Pin #Direction Control (4) */ +#define PORT_P3_DIR_P4 (0x1 << 4) +#define PORT_P3_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P3_DIR_P4_GET(val) ((((val) & PORT_P3_DIR_P4) >> 4) & 0x1) +#define PORT_P3_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 3 Pin #Direction Control (3) */ +#define PORT_P3_DIR_P3 (0x1 << 3) +#define PORT_P3_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P3_DIR_P3_GET(val) ((((val) & PORT_P3_DIR_P3) >> 3) & 0x1) +#define PORT_P3_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 3 Pin #Direction Control (2) */ +#define PORT_P3_DIR_P2 (0x1 << 2) +#define PORT_P3_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P3_DIR_P2_GET(val) ((((val) & PORT_P3_DIR_P2) >> 2) & 0x1) +#define PORT_P3_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 3 Pin #Direction Control (1) */ +#define PORT_P3_DIR_P1 (0x1 << 1) +#define PORT_P3_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P3_DIR_P1_GET(val) ((((val) & PORT_P3_DIR_P1) >> 1) & 0x1) +#define PORT_P3_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 3 Pin #Direction Control (0) */ +#define PORT_P3_DIR_P0 (0x1) +#define PORT_P3_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P3_DIR_P0_GET(val) ((((val) & PORT_P3_DIR_P0) >> 0) & 0x1) +#define PORT_P3_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 3 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 3 Bit # (19) */ +#define PORT_P3_ALTSEL0_P19 (0x1 << 19) +#define PORT_P3_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P3_ALTSEL0_P19_GET(val) ((((val) & PORT_P3_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P3_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 3 Bit # (18) */ +#define PORT_P3_ALTSEL0_P18 (0x1 << 18) +#define PORT_P3_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P3_ALTSEL0_P18_GET(val) ((((val) & PORT_P3_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P3_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 3 Bit # (17) */ +#define PORT_P3_ALTSEL0_P17 (0x1 << 17) +#define PORT_P3_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P3_ALTSEL0_P17_GET(val) ((((val) & PORT_P3_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P3_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 3 Bit # (16) */ +#define PORT_P3_ALTSEL0_P16 (0x1 << 16) +#define PORT_P3_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P3_ALTSEL0_P16_GET(val) ((((val) & PORT_P3_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P3_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 3 Bit # (15) */ +#define PORT_P3_ALTSEL0_P15 (0x1 << 15) +#define PORT_P3_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P3_ALTSEL0_P15_GET(val) ((((val) & PORT_P3_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P3_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 3 Bit # (14) */ +#define PORT_P3_ALTSEL0_P14 (0x1 << 14) +#define PORT_P3_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P3_ALTSEL0_P14_GET(val) ((((val) & PORT_P3_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P3_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 3 Bit # (13) */ +#define PORT_P3_ALTSEL0_P13 (0x1 << 13) +#define PORT_P3_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P3_ALTSEL0_P13_GET(val) ((((val) & PORT_P3_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P3_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 3 Bit # (12) */ +#define PORT_P3_ALTSEL0_P12 (0x1 << 12) +#define PORT_P3_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P3_ALTSEL0_P12_GET(val) ((((val) & PORT_P3_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P3_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 3 Bit # (11) */ +#define PORT_P3_ALTSEL0_P11 (0x1 << 11) +#define PORT_P3_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P3_ALTSEL0_P11_GET(val) ((((val) & PORT_P3_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P3_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 3 Bit # (10) */ +#define PORT_P3_ALTSEL0_P10 (0x1 << 10) +#define PORT_P3_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P3_ALTSEL0_P10_GET(val) ((((val) & PORT_P3_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P3_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 3 Bit # (9) */ +#define PORT_P3_ALTSEL0_P9 (0x1 << 9) +#define PORT_P3_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P3_ALTSEL0_P9_GET(val) ((((val) & PORT_P3_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P3_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 3 Bit # (8) */ +#define PORT_P3_ALTSEL0_P8 (0x1 << 8) +#define PORT_P3_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P3_ALTSEL0_P8_GET(val) ((((val) & PORT_P3_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P3_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 3 Bit # (7) */ +#define PORT_P3_ALTSEL0_P7 (0x1 << 7) +#define PORT_P3_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P3_ALTSEL0_P7_GET(val) ((((val) & PORT_P3_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P3_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 3 Bit # (6) */ +#define PORT_P3_ALTSEL0_P6 (0x1 << 6) +#define PORT_P3_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P3_ALTSEL0_P6_GET(val) ((((val) & PORT_P3_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P3_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 3 Bit # (5) */ +#define PORT_P3_ALTSEL0_P5 (0x1 << 5) +#define PORT_P3_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P3_ALTSEL0_P5_GET(val) ((((val) & PORT_P3_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P3_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 3 Bit # (4) */ +#define PORT_P3_ALTSEL0_P4 (0x1 << 4) +#define PORT_P3_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P3_ALTSEL0_P4_GET(val) ((((val) & PORT_P3_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P3_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 3 Bit # (3) */ +#define PORT_P3_ALTSEL0_P3 (0x1 << 3) +#define PORT_P3_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P3_ALTSEL0_P3_GET(val) ((((val) & PORT_P3_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P3_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 3 Bit # (2) */ +#define PORT_P3_ALTSEL0_P2 (0x1 << 2) +#define PORT_P3_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P3_ALTSEL0_P2_GET(val) ((((val) & PORT_P3_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P3_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 3 Bit # (1) */ +#define PORT_P3_ALTSEL0_P1 (0x1 << 1) +#define PORT_P3_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P3_ALTSEL0_P1_GET(val) ((((val) & PORT_P3_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P3_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 3 Bit # (0) */ +#define PORT_P3_ALTSEL0_P0 (0x1) +#define PORT_P3_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P3_ALTSEL0_P0_GET(val) ((((val) & PORT_P3_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P3_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 3 Pull Up Device Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 3 Bit # (19) */ +#define PORT_P3_PUEN_P19 (0x1 << 19) +#define PORT_P3_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P3_PUEN_P19_GET(val) ((((val) & PORT_P3_PUEN_P19) >> 19) & 0x1) +#define PORT_P3_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 3 Bit # (18) */ +#define PORT_P3_PUEN_P18 (0x1 << 18) +#define PORT_P3_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P3_PUEN_P18_GET(val) ((((val) & PORT_P3_PUEN_P18) >> 18) & 0x1) +#define PORT_P3_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 3 Bit # (17) */ +#define PORT_P3_PUEN_P17 (0x1 << 17) +#define PORT_P3_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P3_PUEN_P17_GET(val) ((((val) & PORT_P3_PUEN_P17) >> 17) & 0x1) +#define PORT_P3_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 3 Bit # (16) */ +#define PORT_P3_PUEN_P16 (0x1 << 16) +#define PORT_P3_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P3_PUEN_P16_GET(val) ((((val) & PORT_P3_PUEN_P16) >> 16) & 0x1) +#define PORT_P3_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 3 Bit # (15) */ +#define PORT_P3_PUEN_P15 (0x1 << 15) +#define PORT_P3_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P3_PUEN_P15_GET(val) ((((val) & PORT_P3_PUEN_P15) >> 15) & 0x1) +#define PORT_P3_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 3 Bit # (14) */ +#define PORT_P3_PUEN_P14 (0x1 << 14) +#define PORT_P3_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P3_PUEN_P14_GET(val) ((((val) & PORT_P3_PUEN_P14) >> 14) & 0x1) +#define PORT_P3_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 3 Bit # (13) */ +#define PORT_P3_PUEN_P13 (0x1 << 13) +#define PORT_P3_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P3_PUEN_P13_GET(val) ((((val) & PORT_P3_PUEN_P13) >> 13) & 0x1) +#define PORT_P3_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 3 Bit # (12) */ +#define PORT_P3_PUEN_P12 (0x1 << 12) +#define PORT_P3_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P3_PUEN_P12_GET(val) ((((val) & PORT_P3_PUEN_P12) >> 12) & 0x1) +#define PORT_P3_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 3 Bit # (11) */ +#define PORT_P3_PUEN_P11 (0x1 << 11) +#define PORT_P3_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P3_PUEN_P11_GET(val) ((((val) & PORT_P3_PUEN_P11) >> 11) & 0x1) +#define PORT_P3_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 3 Bit # (10) */ +#define PORT_P3_PUEN_P10 (0x1 << 10) +#define PORT_P3_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P3_PUEN_P10_GET(val) ((((val) & PORT_P3_PUEN_P10) >> 10) & 0x1) +#define PORT_P3_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 3 Bit # (9) */ +#define PORT_P3_PUEN_P9 (0x1 << 9) +#define PORT_P3_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P3_PUEN_P9_GET(val) ((((val) & PORT_P3_PUEN_P9) >> 9) & 0x1) +#define PORT_P3_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 3 Bit # (8) */ +#define PORT_P3_PUEN_P8 (0x1 << 8) +#define PORT_P3_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P3_PUEN_P8_GET(val) ((((val) & PORT_P3_PUEN_P8) >> 8) & 0x1) +#define PORT_P3_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 3 Bit # (7) */ +#define PORT_P3_PUEN_P7 (0x1 << 7) +#define PORT_P3_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P3_PUEN_P7_GET(val) ((((val) & PORT_P3_PUEN_P7) >> 7) & 0x1) +#define PORT_P3_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 3 Bit # (6) */ +#define PORT_P3_PUEN_P6 (0x1 << 6) +#define PORT_P3_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P3_PUEN_P6_GET(val) ((((val) & PORT_P3_PUEN_P6) >> 6) & 0x1) +#define PORT_P3_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 3 Bit # (5) */ +#define PORT_P3_PUEN_P5 (0x1 << 5) +#define PORT_P3_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P3_PUEN_P5_GET(val) ((((val) & PORT_P3_PUEN_P5) >> 5) & 0x1) +#define PORT_P3_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 3 Bit # (4) */ +#define PORT_P3_PUEN_P4 (0x1 << 4) +#define PORT_P3_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P3_PUEN_P4_GET(val) ((((val) & PORT_P3_PUEN_P4) >> 4) & 0x1) +#define PORT_P3_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 3 Bit # (3) */ +#define PORT_P3_PUEN_P3 (0x1 << 3) +#define PORT_P3_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P3_PUEN_P3_GET(val) ((((val) & PORT_P3_PUEN_P3) >> 3) & 0x1) +#define PORT_P3_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 3 Bit # (2) */ +#define PORT_P3_PUEN_P2 (0x1 << 2) +#define PORT_P3_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P3_PUEN_P2_GET(val) ((((val) & PORT_P3_PUEN_P2) >> 2) & 0x1) +#define PORT_P3_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 3 Bit # (1) */ +#define PORT_P3_PUEN_P1 (0x1 << 1) +#define PORT_P3_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P3_PUEN_P1_GET(val) ((((val) & PORT_P3_PUEN_P1) >> 1) & 0x1) +#define PORT_P3_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 3 Bit # (0) */ +#define PORT_P3_PUEN_P0 (0x1) +#define PORT_P3_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P3_PUEN_P0_GET(val) ((((val) & PORT_P3_PUEN_P0) >> 0) & 0x1) +#define PORT_P3_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 4 Data Output Register + ******************************************************************************/ + +/* Port 4 Pin # Output Value (23) */ +#define PORT_P4_OUT_P23 (0x1 << 23) +#define PORT_P4_OUT_P23_VAL(val) (((val) & 0x1) << 23) +#define PORT_P4_OUT_P23_GET(val) ((((val) & PORT_P4_OUT_P23) >> 23) & 0x1) +#define PORT_P4_OUT_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P23) | (((val) & 0x1) << 23)) +/* Port 4 Pin # Output Value (22) */ +#define PORT_P4_OUT_P22 (0x1 << 22) +#define PORT_P4_OUT_P22_VAL(val) (((val) & 0x1) << 22) +#define PORT_P4_OUT_P22_GET(val) ((((val) & PORT_P4_OUT_P22) >> 22) & 0x1) +#define PORT_P4_OUT_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P22) | (((val) & 0x1) << 22)) +/* Port 4 Pin # Output Value (21) */ +#define PORT_P4_OUT_P21 (0x1 << 21) +#define PORT_P4_OUT_P21_VAL(val) (((val) & 0x1) << 21) +#define PORT_P4_OUT_P21_GET(val) ((((val) & PORT_P4_OUT_P21) >> 21) & 0x1) +#define PORT_P4_OUT_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P21) | (((val) & 0x1) << 21)) +/* Port 4 Pin # Output Value (20) */ +#define PORT_P4_OUT_P20 (0x1 << 20) +#define PORT_P4_OUT_P20_VAL(val) (((val) & 0x1) << 20) +#define PORT_P4_OUT_P20_GET(val) ((((val) & PORT_P4_OUT_P20) >> 20) & 0x1) +#define PORT_P4_OUT_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P20) | (((val) & 0x1) << 20)) +/* Port 4 Pin # Output Value (19) */ +#define PORT_P4_OUT_P19 (0x1 << 19) +#define PORT_P4_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P4_OUT_P19_GET(val) ((((val) & PORT_P4_OUT_P19) >> 19) & 0x1) +#define PORT_P4_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 4 Pin # Output Value (18) */ +#define PORT_P4_OUT_P18 (0x1 << 18) +#define PORT_P4_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P4_OUT_P18_GET(val) ((((val) & PORT_P4_OUT_P18) >> 18) & 0x1) +#define PORT_P4_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 4 Pin # Output Value (17) */ +#define PORT_P4_OUT_P17 (0x1 << 17) +#define PORT_P4_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P4_OUT_P17_GET(val) ((((val) & PORT_P4_OUT_P17) >> 17) & 0x1) +#define PORT_P4_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 4 Pin # Output Value (16) */ +#define PORT_P4_OUT_P16 (0x1 << 16) +#define PORT_P4_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P4_OUT_P16_GET(val) ((((val) & PORT_P4_OUT_P16) >> 16) & 0x1) +#define PORT_P4_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 4 Pin # Output Value (15) */ +#define PORT_P4_OUT_P15 (0x1 << 15) +#define PORT_P4_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P4_OUT_P15_GET(val) ((((val) & PORT_P4_OUT_P15) >> 15) & 0x1) +#define PORT_P4_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 4 Pin # Output Value (14) */ +#define PORT_P4_OUT_P14 (0x1 << 14) +#define PORT_P4_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P4_OUT_P14_GET(val) ((((val) & PORT_P4_OUT_P14) >> 14) & 0x1) +#define PORT_P4_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 4 Pin # Output Value (13) */ +#define PORT_P4_OUT_P13 (0x1 << 13) +#define PORT_P4_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P4_OUT_P13_GET(val) ((((val) & PORT_P4_OUT_P13) >> 13) & 0x1) +#define PORT_P4_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 4 Pin # Output Value (12) */ +#define PORT_P4_OUT_P12 (0x1 << 12) +#define PORT_P4_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P4_OUT_P12_GET(val) ((((val) & PORT_P4_OUT_P12) >> 12) & 0x1) +#define PORT_P4_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 4 Pin # Output Value (11) */ +#define PORT_P4_OUT_P11 (0x1 << 11) +#define PORT_P4_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P4_OUT_P11_GET(val) ((((val) & PORT_P4_OUT_P11) >> 11) & 0x1) +#define PORT_P4_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 4 Pin # Output Value (10) */ +#define PORT_P4_OUT_P10 (0x1 << 10) +#define PORT_P4_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P4_OUT_P10_GET(val) ((((val) & PORT_P4_OUT_P10) >> 10) & 0x1) +#define PORT_P4_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 4 Pin # Output Value (9) */ +#define PORT_P4_OUT_P9 (0x1 << 9) +#define PORT_P4_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P4_OUT_P9_GET(val) ((((val) & PORT_P4_OUT_P9) >> 9) & 0x1) +#define PORT_P4_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 4 Pin # Output Value (8) */ +#define PORT_P4_OUT_P8 (0x1 << 8) +#define PORT_P4_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P4_OUT_P8_GET(val) ((((val) & PORT_P4_OUT_P8) >> 8) & 0x1) +#define PORT_P4_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 4 Pin # Output Value (7) */ +#define PORT_P4_OUT_P7 (0x1 << 7) +#define PORT_P4_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P4_OUT_P7_GET(val) ((((val) & PORT_P4_OUT_P7) >> 7) & 0x1) +#define PORT_P4_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 4 Pin # Output Value (6) */ +#define PORT_P4_OUT_P6 (0x1 << 6) +#define PORT_P4_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P4_OUT_P6_GET(val) ((((val) & PORT_P4_OUT_P6) >> 6) & 0x1) +#define PORT_P4_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 4 Pin # Output Value (5) */ +#define PORT_P4_OUT_P5 (0x1 << 5) +#define PORT_P4_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P4_OUT_P5_GET(val) ((((val) & PORT_P4_OUT_P5) >> 5) & 0x1) +#define PORT_P4_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 4 Pin # Output Value (4) */ +#define PORT_P4_OUT_P4 (0x1 << 4) +#define PORT_P4_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P4_OUT_P4_GET(val) ((((val) & PORT_P4_OUT_P4) >> 4) & 0x1) +#define PORT_P4_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 4 Pin # Output Value (3) */ +#define PORT_P4_OUT_P3 (0x1 << 3) +#define PORT_P4_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P4_OUT_P3_GET(val) ((((val) & PORT_P4_OUT_P3) >> 3) & 0x1) +#define PORT_P4_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 4 Pin # Output Value (2) */ +#define PORT_P4_OUT_P2 (0x1 << 2) +#define PORT_P4_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P4_OUT_P2_GET(val) ((((val) & PORT_P4_OUT_P2) >> 2) & 0x1) +#define PORT_P4_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 4 Pin # Output Value (1) */ +#define PORT_P4_OUT_P1 (0x1 << 1) +#define PORT_P4_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P4_OUT_P1_GET(val) ((((val) & PORT_P4_OUT_P1) >> 1) & 0x1) +#define PORT_P4_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 4 Pin # Output Value (0) */ +#define PORT_P4_OUT_P0 (0x1) +#define PORT_P4_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P4_OUT_P0_GET(val) ((((val) & PORT_P4_OUT_P0) >> 0) & 0x1) +#define PORT_P4_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 4 Data Input Register + ******************************************************************************/ + +/* Port 4 Pin # Latched Input Value (23) */ +#define PORT_P4_IN_P23 (0x1 << 23) +#define PORT_P4_IN_P23_GET(val) ((((val) & PORT_P4_IN_P23) >> 23) & 0x1) +/* Port 4 Pin # Latched Input Value (22) */ +#define PORT_P4_IN_P22 (0x1 << 22) +#define PORT_P4_IN_P22_GET(val) ((((val) & PORT_P4_IN_P22) >> 22) & 0x1) +/* Port 4 Pin # Latched Input Value (21) */ +#define PORT_P4_IN_P21 (0x1 << 21) +#define PORT_P4_IN_P21_GET(val) ((((val) & PORT_P4_IN_P21) >> 21) & 0x1) +/* Port 4 Pin # Latched Input Value (20) */ +#define PORT_P4_IN_P20 (0x1 << 20) +#define PORT_P4_IN_P20_GET(val) ((((val) & PORT_P4_IN_P20) >> 20) & 0x1) +/* Port 4 Pin # Latched Input Value (19) */ +#define PORT_P4_IN_P19 (0x1 << 19) +#define PORT_P4_IN_P19_GET(val) ((((val) & PORT_P4_IN_P19) >> 19) & 0x1) +/* Port 4 Pin # Latched Input Value (18) */ +#define PORT_P4_IN_P18 (0x1 << 18) +#define PORT_P4_IN_P18_GET(val) ((((val) & PORT_P4_IN_P18) >> 18) & 0x1) +/* Port 4 Pin # Latched Input Value (17) */ +#define PORT_P4_IN_P17 (0x1 << 17) +#define PORT_P4_IN_P17_GET(val) ((((val) & PORT_P4_IN_P17) >> 17) & 0x1) +/* Port 4 Pin # Latched Input Value (16) */ +#define PORT_P4_IN_P16 (0x1 << 16) +#define PORT_P4_IN_P16_GET(val) ((((val) & PORT_P4_IN_P16) >> 16) & 0x1) +/* Port 4 Pin # Latched Input Value (15) */ +#define PORT_P4_IN_P15 (0x1 << 15) +#define PORT_P4_IN_P15_GET(val) ((((val) & PORT_P4_IN_P15) >> 15) & 0x1) +/* Port 4 Pin # Latched Input Value (14) */ +#define PORT_P4_IN_P14 (0x1 << 14) +#define PORT_P4_IN_P14_GET(val) ((((val) & PORT_P4_IN_P14) >> 14) & 0x1) +/* Port 4 Pin # Latched Input Value (13) */ +#define PORT_P4_IN_P13 (0x1 << 13) +#define PORT_P4_IN_P13_GET(val) ((((val) & PORT_P4_IN_P13) >> 13) & 0x1) +/* Port 4 Pin # Latched Input Value (12) */ +#define PORT_P4_IN_P12 (0x1 << 12) +#define PORT_P4_IN_P12_GET(val) ((((val) & PORT_P4_IN_P12) >> 12) & 0x1) +/* Port 4 Pin # Latched Input Value (11) */ +#define PORT_P4_IN_P11 (0x1 << 11) +#define PORT_P4_IN_P11_GET(val) ((((val) & PORT_P4_IN_P11) >> 11) & 0x1) +/* Port 4 Pin # Latched Input Value (10) */ +#define PORT_P4_IN_P10 (0x1 << 10) +#define PORT_P4_IN_P10_GET(val) ((((val) & PORT_P4_IN_P10) >> 10) & 0x1) +/* Port 4 Pin # Latched Input Value (9) */ +#define PORT_P4_IN_P9 (0x1 << 9) +#define PORT_P4_IN_P9_GET(val) ((((val) & PORT_P4_IN_P9) >> 9) & 0x1) +/* Port 4 Pin # Latched Input Value (8) */ +#define PORT_P4_IN_P8 (0x1 << 8) +#define PORT_P4_IN_P8_GET(val) ((((val) & PORT_P4_IN_P8) >> 8) & 0x1) +/* Port 4 Pin # Latched Input Value (7) */ +#define PORT_P4_IN_P7 (0x1 << 7) +#define PORT_P4_IN_P7_GET(val) ((((val) & PORT_P4_IN_P7) >> 7) & 0x1) +/* Port 4 Pin # Latched Input Value (6) */ +#define PORT_P4_IN_P6 (0x1 << 6) +#define PORT_P4_IN_P6_GET(val) ((((val) & PORT_P4_IN_P6) >> 6) & 0x1) +/* Port 4 Pin # Latched Input Value (5) */ +#define PORT_P4_IN_P5 (0x1 << 5) +#define PORT_P4_IN_P5_GET(val) ((((val) & PORT_P4_IN_P5) >> 5) & 0x1) +/* Port 4 Pin # Latched Input Value (4) */ +#define PORT_P4_IN_P4 (0x1 << 4) +#define PORT_P4_IN_P4_GET(val) ((((val) & PORT_P4_IN_P4) >> 4) & 0x1) +/* Port 4 Pin # Latched Input Value (3) */ +#define PORT_P4_IN_P3 (0x1 << 3) +#define PORT_P4_IN_P3_GET(val) ((((val) & PORT_P4_IN_P3) >> 3) & 0x1) +/* Port 4 Pin # Latched Input Value (2) */ +#define PORT_P4_IN_P2 (0x1 << 2) +#define PORT_P4_IN_P2_GET(val) ((((val) & PORT_P4_IN_P2) >> 2) & 0x1) +/* Port 4 Pin # Latched Input Value (1) */ +#define PORT_P4_IN_P1 (0x1 << 1) +#define PORT_P4_IN_P1_GET(val) ((((val) & PORT_P4_IN_P1) >> 1) & 0x1) +/* Port 4 Pin # Latched Input Value (0) */ +#define PORT_P4_IN_P0 (0x1) +#define PORT_P4_IN_P0_GET(val) ((((val) & PORT_P4_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 4 Direction Register + ******************************************************************************/ + +/* Port 4 Pin #Direction Control (23) */ +#define PORT_P4_DIR_P23 (0x1 << 23) +#define PORT_P4_DIR_P23_VAL(val) (((val) & 0x1) << 23) +#define PORT_P4_DIR_P23_GET(val) ((((val) & PORT_P4_DIR_P23) >> 23) & 0x1) +#define PORT_P4_DIR_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P23) | (((val) & 0x1) << 23)) +/* Port 4 Pin #Direction Control (22) */ +#define PORT_P4_DIR_P22 (0x1 << 22) +#define PORT_P4_DIR_P22_VAL(val) (((val) & 0x1) << 22) +#define PORT_P4_DIR_P22_GET(val) ((((val) & PORT_P4_DIR_P22) >> 22) & 0x1) +#define PORT_P4_DIR_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P22) | (((val) & 0x1) << 22)) +/* Port 4 Pin #Direction Control (21) */ +#define PORT_P4_DIR_P21 (0x1 << 21) +#define PORT_P4_DIR_P21_VAL(val) (((val) & 0x1) << 21) +#define PORT_P4_DIR_P21_GET(val) ((((val) & PORT_P4_DIR_P21) >> 21) & 0x1) +#define PORT_P4_DIR_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P21) | (((val) & 0x1) << 21)) +/* Port 4 Pin #Direction Control (20) */ +#define PORT_P4_DIR_P20 (0x1 << 20) +#define PORT_P4_DIR_P20_VAL(val) (((val) & 0x1) << 20) +#define PORT_P4_DIR_P20_GET(val) ((((val) & PORT_P4_DIR_P20) >> 20) & 0x1) +#define PORT_P4_DIR_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P20) | (((val) & 0x1) << 20)) +/* Port 4 Pin #Direction Control (19) */ +#define PORT_P4_DIR_P19 (0x1 << 19) +#define PORT_P4_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P4_DIR_P19_GET(val) ((((val) & PORT_P4_DIR_P19) >> 19) & 0x1) +#define PORT_P4_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 4 Pin #Direction Control (18) */ +#define PORT_P4_DIR_P18 (0x1 << 18) +#define PORT_P4_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P4_DIR_P18_GET(val) ((((val) & PORT_P4_DIR_P18) >> 18) & 0x1) +#define PORT_P4_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 4 Pin #Direction Control (17) */ +#define PORT_P4_DIR_P17 (0x1 << 17) +#define PORT_P4_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P4_DIR_P17_GET(val) ((((val) & PORT_P4_DIR_P17) >> 17) & 0x1) +#define PORT_P4_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 4 Pin #Direction Control (16) */ +#define PORT_P4_DIR_P16 (0x1 << 16) +#define PORT_P4_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P4_DIR_P16_GET(val) ((((val) & PORT_P4_DIR_P16) >> 16) & 0x1) +#define PORT_P4_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 4 Pin #Direction Control (15) */ +#define PORT_P4_DIR_P15 (0x1 << 15) +#define PORT_P4_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P4_DIR_P15_GET(val) ((((val) & PORT_P4_DIR_P15) >> 15) & 0x1) +#define PORT_P4_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 4 Pin #Direction Control (14) */ +#define PORT_P4_DIR_P14 (0x1 << 14) +#define PORT_P4_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P4_DIR_P14_GET(val) ((((val) & PORT_P4_DIR_P14) >> 14) & 0x1) +#define PORT_P4_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 4 Pin #Direction Control (13) */ +#define PORT_P4_DIR_P13 (0x1 << 13) +#define PORT_P4_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P4_DIR_P13_GET(val) ((((val) & PORT_P4_DIR_P13) >> 13) & 0x1) +#define PORT_P4_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 4 Pin #Direction Control (12) */ +#define PORT_P4_DIR_P12 (0x1 << 12) +#define PORT_P4_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P4_DIR_P12_GET(val) ((((val) & PORT_P4_DIR_P12) >> 12) & 0x1) +#define PORT_P4_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 4 Pin #Direction Control (11) */ +#define PORT_P4_DIR_P11 (0x1 << 11) +#define PORT_P4_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P4_DIR_P11_GET(val) ((((val) & PORT_P4_DIR_P11) >> 11) & 0x1) +#define PORT_P4_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 4 Pin #Direction Control (10) */ +#define PORT_P4_DIR_P10 (0x1 << 10) +#define PORT_P4_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P4_DIR_P10_GET(val) ((((val) & PORT_P4_DIR_P10) >> 10) & 0x1) +#define PORT_P4_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 4 Pin #Direction Control (9) */ +#define PORT_P4_DIR_P9 (0x1 << 9) +#define PORT_P4_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P4_DIR_P9_GET(val) ((((val) & PORT_P4_DIR_P9) >> 9) & 0x1) +#define PORT_P4_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 4 Pin #Direction Control (8) */ +#define PORT_P4_DIR_P8 (0x1 << 8) +#define PORT_P4_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P4_DIR_P8_GET(val) ((((val) & PORT_P4_DIR_P8) >> 8) & 0x1) +#define PORT_P4_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 4 Pin #Direction Control (7) */ +#define PORT_P4_DIR_P7 (0x1 << 7) +#define PORT_P4_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P4_DIR_P7_GET(val) ((((val) & PORT_P4_DIR_P7) >> 7) & 0x1) +#define PORT_P4_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 4 Pin #Direction Control (6) */ +#define PORT_P4_DIR_P6 (0x1 << 6) +#define PORT_P4_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P4_DIR_P6_GET(val) ((((val) & PORT_P4_DIR_P6) >> 6) & 0x1) +#define PORT_P4_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 4 Pin #Direction Control (5) */ +#define PORT_P4_DIR_P5 (0x1 << 5) +#define PORT_P4_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P4_DIR_P5_GET(val) ((((val) & PORT_P4_DIR_P5) >> 5) & 0x1) +#define PORT_P4_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 4 Pin #Direction Control (4) */ +#define PORT_P4_DIR_P4 (0x1 << 4) +#define PORT_P4_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P4_DIR_P4_GET(val) ((((val) & PORT_P4_DIR_P4) >> 4) & 0x1) +#define PORT_P4_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 4 Pin #Direction Control (3) */ +#define PORT_P4_DIR_P3 (0x1 << 3) +#define PORT_P4_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P4_DIR_P3_GET(val) ((((val) & PORT_P4_DIR_P3) >> 3) & 0x1) +#define PORT_P4_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 4 Pin #Direction Control (2) */ +#define PORT_P4_DIR_P2 (0x1 << 2) +#define PORT_P4_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P4_DIR_P2_GET(val) ((((val) & PORT_P4_DIR_P2) >> 2) & 0x1) +#define PORT_P4_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 4 Pin #Direction Control (1) */ +#define PORT_P4_DIR_P1 (0x1 << 1) +#define PORT_P4_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P4_DIR_P1_GET(val) ((((val) & PORT_P4_DIR_P1) >> 1) & 0x1) +#define PORT_P4_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 4 Pin #Direction Control (0) */ +#define PORT_P4_DIR_P0 (0x1) +#define PORT_P4_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P4_DIR_P0_GET(val) ((((val) & PORT_P4_DIR_P0) >> 0) & 0x1) +#define PORT_P4_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 4 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 4 Bit # (23) */ +#define PORT_P4_ALTSEL0_P23 (0x1 << 23) +#define PORT_P4_ALTSEL0_P23_VAL(val) (((val) & 0x1) << 23) +#define PORT_P4_ALTSEL0_P23_GET(val) ((((val) & PORT_P4_ALTSEL0_P23) >> 23) & 0x1) +#define PORT_P4_ALTSEL0_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P23) | (((val) & 0x1) << 23)) +/* Alternate Function at Port 4 Bit # (22) */ +#define PORT_P4_ALTSEL0_P22 (0x1 << 22) +#define PORT_P4_ALTSEL0_P22_VAL(val) (((val) & 0x1) << 22) +#define PORT_P4_ALTSEL0_P22_GET(val) ((((val) & PORT_P4_ALTSEL0_P22) >> 22) & 0x1) +#define PORT_P4_ALTSEL0_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P22) | (((val) & 0x1) << 22)) +/* Alternate Function at Port 4 Bit # (21) */ +#define PORT_P4_ALTSEL0_P21 (0x1 << 21) +#define PORT_P4_ALTSEL0_P21_VAL(val) (((val) & 0x1) << 21) +#define PORT_P4_ALTSEL0_P21_GET(val) ((((val) & PORT_P4_ALTSEL0_P21) >> 21) & 0x1) +#define PORT_P4_ALTSEL0_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P21) | (((val) & 0x1) << 21)) +/* Alternate Function at Port 4 Bit # (20) */ +#define PORT_P4_ALTSEL0_P20 (0x1 << 20) +#define PORT_P4_ALTSEL0_P20_VAL(val) (((val) & 0x1) << 20) +#define PORT_P4_ALTSEL0_P20_GET(val) ((((val) & PORT_P4_ALTSEL0_P20) >> 20) & 0x1) +#define PORT_P4_ALTSEL0_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P20) | (((val) & 0x1) << 20)) +/* Alternate Function at Port 4 Bit # (19) */ +#define PORT_P4_ALTSEL0_P19 (0x1 << 19) +#define PORT_P4_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P4_ALTSEL0_P19_GET(val) ((((val) & PORT_P4_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P4_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 4 Bit # (18) */ +#define PORT_P4_ALTSEL0_P18 (0x1 << 18) +#define PORT_P4_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P4_ALTSEL0_P18_GET(val) ((((val) & PORT_P4_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P4_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 4 Bit # (17) */ +#define PORT_P4_ALTSEL0_P17 (0x1 << 17) +#define PORT_P4_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P4_ALTSEL0_P17_GET(val) ((((val) & PORT_P4_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P4_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 4 Bit # (16) */ +#define PORT_P4_ALTSEL0_P16 (0x1 << 16) +#define PORT_P4_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P4_ALTSEL0_P16_GET(val) ((((val) & PORT_P4_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P4_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 4 Bit # (15) */ +#define PORT_P4_ALTSEL0_P15 (0x1 << 15) +#define PORT_P4_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P4_ALTSEL0_P15_GET(val) ((((val) & PORT_P4_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P4_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 4 Bit # (14) */ +#define PORT_P4_ALTSEL0_P14 (0x1 << 14) +#define PORT_P4_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P4_ALTSEL0_P14_GET(val) ((((val) & PORT_P4_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P4_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 4 Bit # (13) */ +#define PORT_P4_ALTSEL0_P13 (0x1 << 13) +#define PORT_P4_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P4_ALTSEL0_P13_GET(val) ((((val) & PORT_P4_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P4_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 4 Bit # (12) */ +#define PORT_P4_ALTSEL0_P12 (0x1 << 12) +#define PORT_P4_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P4_ALTSEL0_P12_GET(val) ((((val) & PORT_P4_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P4_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 4 Bit # (11) */ +#define PORT_P4_ALTSEL0_P11 (0x1 << 11) +#define PORT_P4_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P4_ALTSEL0_P11_GET(val) ((((val) & PORT_P4_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P4_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 4 Bit # (10) */ +#define PORT_P4_ALTSEL0_P10 (0x1 << 10) +#define PORT_P4_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P4_ALTSEL0_P10_GET(val) ((((val) & PORT_P4_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P4_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 4 Bit # (9) */ +#define PORT_P4_ALTSEL0_P9 (0x1 << 9) +#define PORT_P4_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P4_ALTSEL0_P9_GET(val) ((((val) & PORT_P4_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P4_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 4 Bit # (8) */ +#define PORT_P4_ALTSEL0_P8 (0x1 << 8) +#define PORT_P4_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P4_ALTSEL0_P8_GET(val) ((((val) & PORT_P4_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P4_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 4 Bit # (7) */ +#define PORT_P4_ALTSEL0_P7 (0x1 << 7) +#define PORT_P4_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P4_ALTSEL0_P7_GET(val) ((((val) & PORT_P4_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P4_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 4 Bit # (6) */ +#define PORT_P4_ALTSEL0_P6 (0x1 << 6) +#define PORT_P4_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P4_ALTSEL0_P6_GET(val) ((((val) & PORT_P4_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P4_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 4 Bit # (5) */ +#define PORT_P4_ALTSEL0_P5 (0x1 << 5) +#define PORT_P4_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P4_ALTSEL0_P5_GET(val) ((((val) & PORT_P4_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P4_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 4 Bit # (4) */ +#define PORT_P4_ALTSEL0_P4 (0x1 << 4) +#define PORT_P4_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P4_ALTSEL0_P4_GET(val) ((((val) & PORT_P4_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P4_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 4 Bit # (3) */ +#define PORT_P4_ALTSEL0_P3 (0x1 << 3) +#define PORT_P4_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P4_ALTSEL0_P3_GET(val) ((((val) & PORT_P4_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P4_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 4 Bit # (2) */ +#define PORT_P4_ALTSEL0_P2 (0x1 << 2) +#define PORT_P4_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P4_ALTSEL0_P2_GET(val) ((((val) & PORT_P4_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P4_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 4 Bit # (1) */ +#define PORT_P4_ALTSEL0_P1 (0x1 << 1) +#define PORT_P4_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P4_ALTSEL0_P1_GET(val) ((((val) & PORT_P4_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P4_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 4 Bit # (0) */ +#define PORT_P4_ALTSEL0_P0 (0x1) +#define PORT_P4_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P4_ALTSEL0_P0_GET(val) ((((val) & PORT_P4_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P4_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 4 Pull Up Device Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 4 Bit # (23) */ +#define PORT_P4_PUEN_P23 (0x1 << 23) +#define PORT_P4_PUEN_P23_VAL(val) (((val) & 0x1) << 23) +#define PORT_P4_PUEN_P23_GET(val) ((((val) & PORT_P4_PUEN_P23) >> 23) & 0x1) +#define PORT_P4_PUEN_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P23) | (((val) & 0x1) << 23)) +/* Pull Up Device Enable at Port 4 Bit # (22) */ +#define PORT_P4_PUEN_P22 (0x1 << 22) +#define PORT_P4_PUEN_P22_VAL(val) (((val) & 0x1) << 22) +#define PORT_P4_PUEN_P22_GET(val) ((((val) & PORT_P4_PUEN_P22) >> 22) & 0x1) +#define PORT_P4_PUEN_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P22) | (((val) & 0x1) << 22)) +/* Pull Up Device Enable at Port 4 Bit # (21) */ +#define PORT_P4_PUEN_P21 (0x1 << 21) +#define PORT_P4_PUEN_P21_VAL(val) (((val) & 0x1) << 21) +#define PORT_P4_PUEN_P21_GET(val) ((((val) & PORT_P4_PUEN_P21) >> 21) & 0x1) +#define PORT_P4_PUEN_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P21) | (((val) & 0x1) << 21)) +/* Pull Up Device Enable at Port 4 Bit # (20) */ +#define PORT_P4_PUEN_P20 (0x1 << 20) +#define PORT_P4_PUEN_P20_VAL(val) (((val) & 0x1) << 20) +#define PORT_P4_PUEN_P20_GET(val) ((((val) & PORT_P4_PUEN_P20) >> 20) & 0x1) +#define PORT_P4_PUEN_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P20) | (((val) & 0x1) << 20)) +/* Pull Up Device Enable at Port 4 Bit # (19) */ +#define PORT_P4_PUEN_P19 (0x1 << 19) +#define PORT_P4_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P4_PUEN_P19_GET(val) ((((val) & PORT_P4_PUEN_P19) >> 19) & 0x1) +#define PORT_P4_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 4 Bit # (18) */ +#define PORT_P4_PUEN_P18 (0x1 << 18) +#define PORT_P4_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P4_PUEN_P18_GET(val) ((((val) & PORT_P4_PUEN_P18) >> 18) & 0x1) +#define PORT_P4_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 4 Bit # (17) */ +#define PORT_P4_PUEN_P17 (0x1 << 17) +#define PORT_P4_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P4_PUEN_P17_GET(val) ((((val) & PORT_P4_PUEN_P17) >> 17) & 0x1) +#define PORT_P4_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 4 Bit # (16) */ +#define PORT_P4_PUEN_P16 (0x1 << 16) +#define PORT_P4_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P4_PUEN_P16_GET(val) ((((val) & PORT_P4_PUEN_P16) >> 16) & 0x1) +#define PORT_P4_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 4 Bit # (15) */ +#define PORT_P4_PUEN_P15 (0x1 << 15) +#define PORT_P4_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P4_PUEN_P15_GET(val) ((((val) & PORT_P4_PUEN_P15) >> 15) & 0x1) +#define PORT_P4_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 4 Bit # (14) */ +#define PORT_P4_PUEN_P14 (0x1 << 14) +#define PORT_P4_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P4_PUEN_P14_GET(val) ((((val) & PORT_P4_PUEN_P14) >> 14) & 0x1) +#define PORT_P4_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 4 Bit # (13) */ +#define PORT_P4_PUEN_P13 (0x1 << 13) +#define PORT_P4_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P4_PUEN_P13_GET(val) ((((val) & PORT_P4_PUEN_P13) >> 13) & 0x1) +#define PORT_P4_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 4 Bit # (12) */ +#define PORT_P4_PUEN_P12 (0x1 << 12) +#define PORT_P4_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P4_PUEN_P12_GET(val) ((((val) & PORT_P4_PUEN_P12) >> 12) & 0x1) +#define PORT_P4_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 4 Bit # (11) */ +#define PORT_P4_PUEN_P11 (0x1 << 11) +#define PORT_P4_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P4_PUEN_P11_GET(val) ((((val) & PORT_P4_PUEN_P11) >> 11) & 0x1) +#define PORT_P4_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 4 Bit # (10) */ +#define PORT_P4_PUEN_P10 (0x1 << 10) +#define PORT_P4_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P4_PUEN_P10_GET(val) ((((val) & PORT_P4_PUEN_P10) >> 10) & 0x1) +#define PORT_P4_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 4 Bit # (9) */ +#define PORT_P4_PUEN_P9 (0x1 << 9) +#define PORT_P4_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P4_PUEN_P9_GET(val) ((((val) & PORT_P4_PUEN_P9) >> 9) & 0x1) +#define PORT_P4_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 4 Bit # (8) */ +#define PORT_P4_PUEN_P8 (0x1 << 8) +#define PORT_P4_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P4_PUEN_P8_GET(val) ((((val) & PORT_P4_PUEN_P8) >> 8) & 0x1) +#define PORT_P4_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 4 Bit # (7) */ +#define PORT_P4_PUEN_P7 (0x1 << 7) +#define PORT_P4_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P4_PUEN_P7_GET(val) ((((val) & PORT_P4_PUEN_P7) >> 7) & 0x1) +#define PORT_P4_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 4 Bit # (6) */ +#define PORT_P4_PUEN_P6 (0x1 << 6) +#define PORT_P4_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P4_PUEN_P6_GET(val) ((((val) & PORT_P4_PUEN_P6) >> 6) & 0x1) +#define PORT_P4_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 4 Bit # (5) */ +#define PORT_P4_PUEN_P5 (0x1 << 5) +#define PORT_P4_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P4_PUEN_P5_GET(val) ((((val) & PORT_P4_PUEN_P5) >> 5) & 0x1) +#define PORT_P4_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 4 Bit # (4) */ +#define PORT_P4_PUEN_P4 (0x1 << 4) +#define PORT_P4_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P4_PUEN_P4_GET(val) ((((val) & PORT_P4_PUEN_P4) >> 4) & 0x1) +#define PORT_P4_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 4 Bit # (3) */ +#define PORT_P4_PUEN_P3 (0x1 << 3) +#define PORT_P4_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P4_PUEN_P3_GET(val) ((((val) & PORT_P4_PUEN_P3) >> 3) & 0x1) +#define PORT_P4_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 4 Bit # (2) */ +#define PORT_P4_PUEN_P2 (0x1 << 2) +#define PORT_P4_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P4_PUEN_P2_GET(val) ((((val) & PORT_P4_PUEN_P2) >> 2) & 0x1) +#define PORT_P4_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 4 Bit # (1) */ +#define PORT_P4_PUEN_P1 (0x1 << 1) +#define PORT_P4_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P4_PUEN_P1_GET(val) ((((val) & PORT_P4_PUEN_P1) >> 1) & 0x1) +#define PORT_P4_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 4 Bit # (0) */ +#define PORT_P4_PUEN_P0 (0x1) +#define PORT_P4_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P4_PUEN_P0_GET(val) ((((val) & PORT_P4_PUEN_P0) >> 0) & 0x1) +#define PORT_P4_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P0) | (((val) & 0x1) << 0)) + +#endif /* __PORT_H */ diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h new file mode 100644 index 000000000..4ea2f5a68 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h @@ -0,0 +1,624 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __SSC_REG_H +#define __SSC_REG_H + +/** SSC register structure */ +struct svip_reg_ssc { + volatile unsigned long clc; /* 0x00 */ + volatile unsigned long pisel; /* 0x04 */ + volatile unsigned long id; /* 0x08 */ + volatile unsigned long reserved0; /* 0x0c */ + volatile unsigned long mcon; /* 0x10 */ + volatile unsigned long state; /* 0x14 */ + volatile unsigned long whbstate; /* 0x18 */ + volatile unsigned long reserved1; /* 0x1c */ + volatile unsigned long tb; /* 0x20 */ + volatile unsigned long rb; /* 0x24 */ + volatile unsigned long reserved2[2]; /* 0x28 */ + volatile unsigned long rxfcon; /* 0x30 */ + volatile unsigned long txfcon; /* 0x34 */ + volatile unsigned long fstat; /* 0x38 */ + volatile unsigned long reserved3; /* 0x3c */ + volatile unsigned long br; /* 0x40 */ + volatile unsigned long brstat; /* 0x44 */ + volatile unsigned long reserved4[6]; /* 0x48 */ + volatile unsigned long sfcon; /* 0x60 */ + volatile unsigned long sfstat; /* 0x64 */ + volatile unsigned long reserved5[2]; /* 0x68 */ + volatile unsigned long gpocon; /* 0x70 */ + volatile unsigned long gpostat; /* 0x74 */ + volatile unsigned long whbgpostat; /* 0x78 */ + volatile unsigned long reserved6; /* 0x7c */ + volatile unsigned long rxreq; /* 0x80 */ + volatile unsigned long rxcnt; /* 0x84 */ + volatile unsigned long reserved7[25]; /* 0x88 */ + volatile unsigned long dma_con; /* 0xEC */ + volatile unsigned long reserved8; /* 0xf0 */ + volatile unsigned long irnen; /* 0xF4 */ + volatile unsigned long irncr; /* 0xF8 */ + volatile unsigned long irnicr; /* 0xFC */ +}; + +/******************************************************************************* + * CLC Register + ******************************************************************************/ + +/* Clock Divider for Sleep Mode (23:16) */ +#define SSC_CLC_SMC (0xff << 16) +#define SSC_CLC_SMC_VAL(val) (((val) & 0xff) << 16) +#define SSC_CLC_SMC_GET(val) ((((val) & SSC_CLC_SMC) >> 16) & 0xff) +#define SSC_CLC_SMC_SET(reg,val) (reg) = ((reg & ~SSC_CLC_SMC) | (((val) & 0xff) << 16)) +/* Clock Divider for Normal Run Mode (15:8) */ +#define SSC_CLC_RMC (0xff << 8) +#define SSC_CLC_RMC_VAL(val) (((val) & 0xff) << 8) +#define SSC_CLC_RMC_GET(val) ((((val) & SSC_CLC_RMC) >> 8) & 0xff) +#define SSC_CLC_RMC_SET(reg,val) (reg) = ((reg & ~SSC_CLC_RMC) | (((val) & 0xff) << 8)) +/* Fast Shut-Off Enable Bit (5) */ +#define SSC_CLC_FSOE (0x1 << 5) +#define SSC_CLC_FSOE_VAL(val) (((val) & 0x1) << 5) +#define SSC_CLC_FSOE_GET(val) ((((val) & SSC_CLC_FSOE) >> 5) & 0x1) +#define SSC_CLC_FSOE_SET(reg,val) (reg) = ((reg & ~SSC_CLC_FSOE) | (((val) & 0x1) << 5)) +/* Suspend Bit Write Enable for OCDS (4) */ +#define SSC_CLC_SBWE (0x1 << 4) +#define SSC_CLC_SBWE_VAL(val) (((val) & 0x1) << 4) +#define SSC_CLC_SBWE_SET(reg,val) (reg) = (((reg & ~SSC_CLC_SBWE) | (val) & 1) << 4) +/* External Request Disable (3) */ +#define SSC_CLC_EDIS (0x1 << 3) +#define SSC_CLC_EDIS_VAL(val) (((val) & 0x1) << 3) +#define SSC_CLC_EDIS_GET(val) ((((val) & SSC_CLC_EDIS) >> 3) & 0x1) +#define SSC_CLC_EDIS_SET(reg,val) (reg) = ((reg & ~SSC_CLC_EDIS) | (((val) & 0x1) << 3)) +/* Suspend Enable Bit for OCDS (2) */ +#define SSC_CLC_SPEN (0x1 << 2) +#define SSC_CLC_SPEN_VAL(val) (((val) & 0x1) << 2) +#define SSC_CLC_SPEN_GET(val) ((((val) & SSC_CLC_SPEN) >> 2) & 0x1) +#define SSC_CLC_SPEN_SET(reg,val) (reg) = ((reg & ~SSC_CLC_SPEN) | (((val) & 0x1) << 2)) +/* Disable Status Bit (1) */ +#define SSC_CLC_DISS (0x1 << 1) +#define SSC_CLC_DISS_GET(val) ((((val) & SSC_CLC_DISS) >> 1) & 0x1) +/* Disable Request Bit (0) */ +#define SSC_CLC_DISR (0x1) +#define SSC_CLC_DISR_VAL(val) (((val) & 0x1) << 0) +#define SSC_CLC_DISR_GET(val) ((((val) & SSC_CLC_DISR) >> 0) & 0x1) +#define SSC_CLC_DISR_SET(reg,val) (reg) = ((reg & ~SSC_CLC_DISR) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * ID Register + ******************************************************************************/ + +/* Transmit FIFO Size (29:24) */ +#define SSC_ID_TXFS (0x3f << 24) +#define SSC_ID_TXFS_GET(val) ((((val) & SSC_ID_TXFS) >> 24) & 0x3f) +/* Receive FIFO Size (21:16) */ +#define SSC_ID_RXFS (0x3f << 16) +#define SSC_ID_RXFS_GET(val) ((((val) & SSC_ID_RXFS) >> 16) & 0x3f) +/* Module ID (15:8) */ +#define SSC_ID_ID (0xff << 8) +#define SSC_ID_ID_GET(val) ((((val) & SSC_ID_ID) >> 8) & 0xff) +/* Configuration (5) */ +#define SSC_ID_CFG (0x1 << 5) +#define SSC_ID_CFG_GET(val) ((((val) & SSC_ID_CFG) >> 5) & 0x1) +/* Revision (4:0) */ +#define SSC_ID_REV (0x1f) +#define SSC_ID_REV_GET(val) ((((val) & SSC_ID_REV) >> 0) & 0x1f) + +/******************************************************************************* + * MCON Register + ******************************************************************************/ + +/* Echo Mode (24) */ +#define SSC_MCON_EM (0x1 << 24) +#define SSC_MCON_EM_VAL(val) (((val) & 0x1) << 24) +#define SSC_MCON_EM_GET(val) ((((val) & SSC_MCON_EM) >> 24) & 0x1) +#define SSC_MCON_EM_SET(reg,val) (reg) = ((reg & ~SSC_MCON_EM) | (((val) & 0x1) << 24)) +/* Idle Bit Value (23) */ +#define SSC_MCON_IDLE (0x1 << 23) +#define SSC_MCON_IDLE_VAL(val) (((val) & 0x1) << 23) +#define SSC_MCON_IDLE_GET(val) ((((val) & SSC_MCON_IDLE) >> 23) & 0x1) +#define SSC_MCON_IDLE_SET(reg,val) (reg) = ((reg & ~SSC_MCON_IDLE) | (((val) & 0x1) << 23)) +/* Enable Byte Valid Control (22) */ +#define SSC_MCON_ENBV (0x1 << 22) +#define SSC_MCON_ENBV_VAL(val) (((val) & 0x1) << 22) +#define SSC_MCON_ENBV_GET(val) ((((val) & SSC_MCON_ENBV) >> 22) & 0x1) +#define SSC_MCON_ENBV_SET(reg,val) (reg) = ((reg & ~SSC_MCON_ENBV) | (((val) & 0x1) << 22)) +/* Data Width Selection (20:16) */ +#define SSC_MCON_BM (0x1f << 16) +#define SSC_MCON_BM_VAL(val) (((val) & 0x1f) << 16) +#define SSC_MCON_BM_GET(val) ((((val) & SSC_MCON_BM) >> 16) & 0x1f) +#define SSC_MCON_BM_SET(reg,val) (reg) = ((reg & ~SSC_MCON_BM) | (((val) & 0x1f) << 16)) +/* Receive Underflow Error Enable (12) */ +#define SSC_MCON_RUEN (0x1 << 12) +#define SSC_MCON_RUEN_VAL(val) (((val) & 0x1) << 12) +#define SSC_MCON_RUEN_GET(val) ((((val) & SSC_MCON_RUEN) >> 12) & 0x1) +#define SSC_MCON_RUEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_RUEN) | (((val) & 0x1) << 12)) +/* Transmit Underflow Error Enable (11) */ +#define SSC_MCON_TUEN (0x1 << 11) +#define SSC_MCON_TUEN_VAL(val) (((val) & 0x1) << 11) +#define SSC_MCON_TUEN_GET(val) ((((val) & SSC_MCON_TUEN) >> 11) & 0x1) +#define SSC_MCON_TUEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_TUEN) | (((val) & 0x1) << 11)) +/* Abort Error Enable (10) */ +#define SSC_MCON_AEN (0x1 << 10) +#define SSC_MCON_AEN_VAL(val) (((val) & 0x1) << 10) +#define SSC_MCON_AEN_GET(val) ((((val) & SSC_MCON_AEN) >> 10) & 0x1) +#define SSC_MCON_AEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_AEN) | (((val) & 0x1) << 10)) +/* Receive Overflow Error Enable (9) */ +#define SSC_MCON_REN (0x1 << 9) +#define SSC_MCON_REN_VAL(val) (((val) & 0x1) << 9) +#define SSC_MCON_REN_GET(val) ((((val) & SSC_MCON_REN) >> 9) & 0x1) +#define SSC_MCON_REN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_REN) | (((val) & 0x1) << 9)) +/* Transmit Overflow Error Enable (8) */ +#define SSC_MCON_TEN (0x1 << 8) +#define SSC_MCON_TEN_VAL(val) (((val) & 0x1) << 8) +#define SSC_MCON_TEN_GET(val) ((((val) & SSC_MCON_TEN) >> 8) & 0x1) +#define SSC_MCON_TEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_TEN) | (((val) & 0x1) << 8)) +/* Loop Back Control (7) */ +#define SSC_MCON_LB (0x1 << 7) +#define SSC_MCON_LB_VAL(val) (((val) & 0x1) << 7) +#define SSC_MCON_LB_GET(val) ((((val) & SSC_MCON_LB) >> 7) & 0x1) +#define SSC_MCON_LB_SET(reg,val) (reg) = ((reg & ~SSC_MCON_LB) | (((val) & 0x1) << 7)) +/* Clock Polarity Control (6) */ +#define SSC_MCON_PO (0x1 << 6) +#define SSC_MCON_PO_VAL(val) (((val) & 0x1) << 6) +#define SSC_MCON_PO_GET(val) ((((val) & SSC_MCON_PO) >> 6) & 0x1) +#define SSC_MCON_PO_SET(reg,val) (reg) = ((reg & ~SSC_MCON_PO) | (((val) & 0x1) << 6)) +/* Clock Phase Control (5) */ +#define SSC_MCON_PH (0x1 << 5) +#define SSC_MCON_PH_VAL(val) (((val) & 0x1) << 5) +#define SSC_MCON_PH_GET(val) ((((val) & SSC_MCON_PH) >> 5) & 0x1) +#define SSC_MCON_PH_SET(reg,val) (reg) = ((reg & ~SSC_MCON_PH) | (((val) & 0x1) << 5)) +/* Heading Control (4) */ +#define SSC_MCON_HB (0x1 << 4) +#define SSC_MCON_HB_VAL(val) (((val) & 0x1) << 4) +#define SSC_MCON_HB_GET(val) ((((val) & SSC_MCON_HB) >> 4) & 0x1) +#define SSC_MCON_HB_SET(reg,val) (reg) = ((reg & ~SSC_MCON_HB) | (((val) & 0x1) << 4)) +/* Chip Select Enable (3) */ +#define SSC_MCON_CSBEN (0x1 << 3) +#define SSC_MCON_CSBEN_VAL(val) (((val) & 0x1) << 3) +#define SSC_MCON_CSBEN_GET(val) ((((val) & SSC_MCON_CSBEN) >> 3) & 0x1) +#define SSC_MCON_CSBEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_CSBEN) | (((val) & 0x1) << 3)) +/* Chip Select Invert (2) */ +#define SSC_MCON_CSBINV (0x1 << 2) +#define SSC_MCON_CSBINV_VAL(val) (((val) & 0x1) << 2) +#define SSC_MCON_CSBINV_GET(val) ((((val) & SSC_MCON_CSBINV) >> 2) & 0x1) +#define SSC_MCON_CSBINV_SET(reg,val) (reg) = ((reg & ~SSC_MCON_CSBINV) | (((val) & 0x1) << 2)) +/* Receive Off (1) */ +#define SSC_MCON_RXOFF (0x1 << 1) +#define SSC_MCON_RXOFF_VAL(val) (((val) & 0x1) << 1) +#define SSC_MCON_RXOFF_GET(val) ((((val) & SSC_MCON_RXOFF) >> 1) & 0x1) +#define SSC_MCON_RXOFF_SET(reg,val) (reg) = ((reg & ~SSC_MCON_RXOFF) | (((val) & 0x1) << 1)) +/* Transmit Off (0) */ +#define SSC_MCON_TXOFF (0x1) +#define SSC_MCON_TXOFF_VAL(val) (((val) & 0x1) << 0) +#define SSC_MCON_TXOFF_GET(val) ((((val) & SSC_MCON_TXOFF) >> 0) & 0x1) +#define SSC_MCON_TXOFF_SET(reg,val) (reg) = ((reg & ~SSC_MCON_TXOFF) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * STATE Register + ******************************************************************************/ + +/* Receive End-of-Message (31) */ +#define SSC_STATE_RXEOM (0x1 << 31) +#define SSC_STATE_RXEOM_GET(val) ((((val) & SSC_STATE_RXEOM) >> 31) & 0x1) +/* Receive Byte Valid (30:28) */ +#define SSC_STATE_RXBV (0x7 << 28) +#define SSC_STATE_RXBV_GET(val) ((((val) & SSC_STATE_RXBV) >> 28) & 0x7) +/* Transmit End-of-Message (27) */ +#define SSC_STATE_TXEOM (0x1 << 27) +#define SSC_STATE_TXEOM_GET(val) ((((val) & SSC_STATE_TXEOM) >> 27) & 0x1) +/* Transmit Byte Valid (26:24) */ +#define SSC_STATE_TXBV (0x7 << 24) +#define SSC_STATE_TXBV_GET(val) ((((val) & SSC_STATE_TXBV) >> 24) & 0x7) +/* Bit Count Field (20:16) */ +#define SSC_STATE_BC (0x1f << 16) +#define SSC_STATE_BC_GET(val) ((((val) & SSC_STATE_BC) >> 16) & 0x1f) +/* Busy Flag (13) */ +#define SSC_STATE_BSY (0x1 << 13) +#define SSC_STATE_BSY_GET(val) ((((val) & SSC_STATE_BSY) >> 13) & 0x1) +/* Receive Underflow Error Flag (12) */ +#define SSC_STATE_RUE (0x1 << 12) +#define SSC_STATE_RUE_GET(val) ((((val) & SSC_STATE_RUE) >> 12) & 0x1) +/* Transmit Underflow Error Flag (11) */ +#define SSC_STATE_TUE (0x1 << 11) +#define SSC_STATE_TUE_GET(val) ((((val) & SSC_STATE_TUE) >> 11) & 0x1) +/* Abort Error Flag (10) */ +#define SSC_STATE_AE (0x1 << 10) +#define SSC_STATE_AE_GET(val) ((((val) & SSC_STATE_AE) >> 10) & 0x1) +/* Receive Error Flag (9) */ +#define SSC_STATE_RE (0x1 << 9) +#define SSC_STATE_RE_GET(val) ((((val) & SSC_STATE_RE) >> 9) & 0x1) +/* Transmit Error Flag (8) */ +#define SSC_STATE_TE (0x1 << 8) +#define SSC_STATE_TE_GET(val) ((((val) & SSC_STATE_TE) >> 8) & 0x1) +/* Mode Error Flag (7) */ +#define SSC_STATE_ME (0x1 << 7) +#define SSC_STATE_ME_GET(val) ((((val) & SSC_STATE_ME) >> 7) & 0x1) +/* Slave Selected (2) */ +#define SSC_STATE_SSEL (0x1 << 2) +#define SSC_STATE_SSEL_GET(val) ((((val) & SSC_STATE_SSEL) >> 2) & 0x1) +/* Master Select Bit (1) */ +#define SSC_STATE_MS (0x1 << 1) +#define SSC_STATE_MS_GET(val) ((((val) & SSC_STATE_MS) >> 1) & 0x1) +/* Enable Bit (0) */ +#define SSC_STATE_EN (0x1) +#define SSC_STATE_EN_GET(val) ((((val) & SSC_STATE_EN) >> 0) & 0x1) + +/******************************************************************************* + * WHBSTATE Register + ******************************************************************************/ + +/* Set Transmit Underflow Error Flag Bit (15) */ +#define SSC_WHBSTATE_SETTUE (0x1 << 15) +#define SSC_WHBSTATE_SETTUE_VAL(val) (((val) & 0x1) << 15) +#define SSC_WHBSTATE_SETTUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETTUE) | (val) & 1) << 15) +/* Set Abort Error Flag Bit (14) */ +#define SSC_WHBSTATE_SETAE (0x1 << 14) +#define SSC_WHBSTATE_SETAE_VAL(val) (((val) & 0x1) << 14) +#define SSC_WHBSTATE_SETAE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETAE) | (val) & 1) << 14) +/* Set Receive Error Flag Bit (13) */ +#define SSC_WHBSTATE_SETRE (0x1 << 13) +#define SSC_WHBSTATE_SETRE_VAL(val) (((val) & 0x1) << 13) +#define SSC_WHBSTATE_SETRE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETRE) | (val) & 1) << 13) +/* Set Transmit Error Flag Bit (12) */ +#define SSC_WHBSTATE_SETTE (0x1 << 12) +#define SSC_WHBSTATE_SETTE_VAL(val) (((val) & 0x1) << 12) +#define SSC_WHBSTATE_SETTE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETTE) | (val) & 1) << 12) +/* Clear Transmit Underflow Error Flag Bit (11) */ +#define SSC_WHBSTATE_CLRTUE (0x1 << 11) +#define SSC_WHBSTATE_CLRTUE_VAL(val) (((val) & 0x1) << 11) +#define SSC_WHBSTATE_CLRTUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRTUE) | (val) & 1) << 11) +/* Clear Abort Error Flag Bit (10) */ +#define SSC_WHBSTATE_CLRAE (0x1 << 10) +#define SSC_WHBSTATE_CLRAE_VAL(val) (((val) & 0x1) << 10) +#define SSC_WHBSTATE_CLRAE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRAE) | (val) & 1) << 10) +/* Clear Receive Error Flag Bit (9) */ +#define SSC_WHBSTATE_CLRRE (0x1 << 9) +#define SSC_WHBSTATE_CLRRE_VAL(val) (((val) & 0x1) << 9) +#define SSC_WHBSTATE_CLRRE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRRE) | (val) & 1) << 9) +/* Clear Transmit Error Flag Bit (8) */ +#define SSC_WHBSTATE_CLRTE (0x1 << 8) +#define SSC_WHBSTATE_CLRTE_VAL(val) (((val) & 0x1) << 8) +#define SSC_WHBSTATE_CLRTE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRTE) | (val) & 1) << 8) +/* Set Mode Error Flag Bit (7) */ +#define SSC_WHBSTATE_SETME (0x1 << 7) +#define SSC_WHBSTATE_SETME_VAL(val) (((val) & 0x1) << 7) +#define SSC_WHBSTATE_SETME_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETME) | (val) & 1) << 7) +/* Clear Mode Error Flag Bit (6) */ +#define SSC_WHBSTATE_CLRME (0x1 << 6) +#define SSC_WHBSTATE_CLRME_VAL(val) (((val) & 0x1) << 6) +#define SSC_WHBSTATE_CLRME_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRME) | (val) & 1) << 6) +/* Set Receive Underflow Error Bit (5) */ +#define SSC_WHBSTATE_SETRUE (0x1 << 5) +#define SSC_WHBSTATE_SETRUE_VAL(val) (((val) & 0x1) << 5) +#define SSC_WHBSTATE_SETRUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETRUE) | (val) & 1) << 5) +/* Clear Receive Underflow Error Bit (4) */ +#define SSC_WHBSTATE_CLRRUE (0x1 << 4) +#define SSC_WHBSTATE_CLRRUE_VAL(val) (((val) & 0x1) << 4) +#define SSC_WHBSTATE_CLRRUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRRUE) | (val) & 1) << 4) +/* Set Master Select Bit (3) */ +#define SSC_WHBSTATE_SETMS (0x1 << 3) +#define SSC_WHBSTATE_SETMS_VAL(val) (((val) & 0x1) << 3) +#define SSC_WHBSTATE_SETMS_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETMS) | (val) & 1) << 3) +/* Clear Master Select Bit (2) */ +#define SSC_WHBSTATE_CLRMS (0x1 << 2) +#define SSC_WHBSTATE_CLRMS_VAL(val) (((val) & 0x1) << 2) +#define SSC_WHBSTATE_CLRMS_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRMS) | (val) & 1) << 2) +/* Set Enable Bit (1) */ +#define SSC_WHBSTATE_SETEN (0x1 << 1) +#define SSC_WHBSTATE_SETEN_VAL(val) (((val) & 0x1) << 1) +#define SSC_WHBSTATE_SETEN_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETEN) | (val) & 1) << 1) +/* Clear Enable Bit (0) */ +#define SSC_WHBSTATE_CLREN (0x1) +#define SSC_WHBSTATE_CLREN_VAL(val) (((val) & 0x1) << 0) +#define SSC_WHBSTATE_CLREN_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLREN) | (val) & 1) << 0) + +/******************************************************************************* + * TB Register + ******************************************************************************/ + +/* Transmit Data Register Value (31:0) */ +#define SSC_TB_TB_VAL (0xFFFFFFFFL) +#define SSC_TB_TB_VAL_VAL(val) (((val) & 0xFFFFFFFFL) << 0) +#define SSC_TB_TB_VAL_GET(val) ((((val) & SSC_TB_TB_VAL) >> 0) & 0xFFFFFFFFL) +#define SSC_TB_TB_VAL_SET(reg,val) (reg) = ((reg & ~SSC_TB_TB_VAL) | (((val) & 0xFFFFFFFFL) << 0)) + +/******************************************************************************* + * RB Register + ******************************************************************************/ + +/* Receive Data Register Value (31:0) */ +#define SSC_RB_RB_VAL (0xFFFFFFFFL) +#define SSC_RB_RB_VAL_GET(val) ((((val) & SSC_RB_RB_VAL) >> 0) & 0xFFFFFFFFL) + +/******************************************************************************* + * FSTAT Register + ******************************************************************************/ + +/* Transmit FIFO Filling Level (13:8) */ +#define SSC_FSTAT_TXFFL (0x3f << 8) +#define SSC_FSTAT_TXFFL_GET(val) ((((val) & SSC_FSTAT_TXFFL) >> 8) & 0x3f) +/* Receive FIFO Filling Level (5:0) */ +#define SSC_FSTAT_RXFFL (0x3f) +#define SSC_FSTAT_RXFFL_GET(val) ((((val) & SSC_FSTAT_RXFFL) >> 0) & 0x3f) + +/******************************************************************************* + * PISEL Register + ******************************************************************************/ + +/* Slave Mode Clock Input Select (2) */ +#define SSC_PISEL_CIS (0x1 << 2) +#define SSC_PISEL_CIS_VAL(val) (((val) & 0x1) << 2) +#define SSC_PISEL_CIS_GET(val) ((((val) & SSC_PISEL_CIS) >> 2) & 0x1) +#define SSC_PISEL_CIS_SET(reg,val) (reg) = ((reg & ~SSC_PISEL_CIS) | (((val) & 0x1) << 2)) +/* Slave Mode Receiver Input Select (1) */ +#define SSC_PISEL_SIS (0x1 << 1) +#define SSC_PISEL_SIS_VAL(val) (((val) & 0x1) << 1) +#define SSC_PISEL_SIS_GET(val) ((((val) & SSC_PISEL_SIS) >> 1) & 0x1) +#define SSC_PISEL_SIS_SET(reg,val) (reg) = ((reg & ~SSC_PISEL_SIS) | (((val) & 0x1) << 1)) +/* Master Mode Receiver Input Select (0) */ +#define SSC_PISEL_MIS (0x1) +#define SSC_PISEL_MIS_VAL(val) (((val) & 0x1) << 0) +#define SSC_PISEL_MIS_GET(val) ((((val) & SSC_PISEL_MIS) >> 0) & 0x1) +#define SSC_PISEL_MIS_SET(reg,val) (reg) = ((reg & ~SSC_PISEL_MIS) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * RXFCON Register + ******************************************************************************/ + +/* Receive FIFO Interrupt Trigger Level (13:8) */ +#define SSC_RXFCON_RXFITL (0x3f << 8) +#define SSC_RXFCON_RXFITL_VAL(val) (((val) & 0x3f) << 8) +#define SSC_RXFCON_RXFITL_GET(val) ((((val) & SSC_RXFCON_RXFITL) >> 8) & 0x3f) +#define SSC_RXFCON_RXFITL_SET(reg,val) (reg) = ((reg & ~SSC_RXFCON_RXFITL) | (((val) & 0x3f) << 8)) +/* Receive FIFO Flush (1) */ +#define SSC_RXFCON_RXFLU (0x1 << 1) +#define SSC_RXFCON_RXFLU_VAL(val) (((val) & 0x1) << 1) +#define SSC_RXFCON_RXFLU_SET(reg,val) (reg) = (((reg & ~SSC_RXFCON_RXFLU) | (val) & 1) << 1) +/* Receive FIFO Enable (0) */ +#define SSC_RXFCON_RXFEN (0x1) +#define SSC_RXFCON_RXFEN_VAL(val) (((val) & 0x1) << 0) +#define SSC_RXFCON_RXFEN_GET(val) ((((val) & SSC_RXFCON_RXFEN) >> 0) & 0x1) +#define SSC_RXFCON_RXFEN_SET(reg,val) (reg) = ((reg & ~SSC_RXFCON_RXFEN) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * TXFCON Register + ******************************************************************************/ + +/* Transmit FIFO Interrupt Trigger Level (13:8) */ +#define SSC_TXFCON_TXFITL (0x3f << 8) +#define SSC_TXFCON_TXFITL_VAL(val) (((val) & 0x3f) << 8) +#define SSC_TXFCON_TXFITL_GET(val) ((((val) & SSC_TXFCON_TXFITL) >> 8) & 0x3f) +#define SSC_TXFCON_TXFITL_SET(reg,val) (reg) = ((reg & ~SSC_TXFCON_TXFITL) | (((val) & 0x3f) << 8)) +/* Transmit FIFO Flush (1) */ +#define SSC_TXFCON_TXFLU (0x1 << 1) +#define SSC_TXFCON_TXFLU_VAL(val) (((val) & 0x1) << 1) +#define SSC_TXFCON_TXFLU_SET(reg,val) (reg) = (((reg & ~SSC_TXFCON_TXFLU) | (val) & 1) << 1) +/* Transmit FIFO Enable (0) */ +#define SSC_TXFCON_TXFEN (0x1) +#define SSC_TXFCON_TXFEN_VAL(val) (((val) & 0x1) << 0) +#define SSC_TXFCON_TXFEN_GET(val) ((((val) & SSC_TXFCON_TXFEN) >> 0) & 0x1) +#define SSC_TXFCON_TXFEN_SET(reg,val) (reg) = ((reg & ~SSC_TXFCON_TXFEN) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * BR Register + ******************************************************************************/ + +/* Baudrate Timer Reload Register Value (15:0) */ +#define SSC_BR_BR_VAL (0xffff) +#define SSC_BR_BR_VAL_VAL(val) (((val) & 0xffff) << 0) +#define SSC_BR_BR_VAL_GET(val) ((((val) & SSC_BR_BR_VAL) >> 0) & 0xffff) +#define SSC_BR_BR_VAL_SET(reg,val) (reg) = ((reg & ~SSC_BR_BR_VAL) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * BRSTAT Register + ******************************************************************************/ + +/* Baudrate Timer Register Value (15:0) */ +#define SSC_BRSTAT_BT_VAL (0xffff) +#define SSC_BRSTAT_BT_VAL_GET(val) ((((val) & SSC_BRSTAT_BT_VAL) >> 0) & 0xffff) + +/******************************************************************************* + * SFCON Register + ******************************************************************************/ + +/* Pause Length (31:22) */ +#define SSC_SFCON_PLEN (0x3ff << 22) +#define SSC_SFCON_PLEN_VAL(val) (((val) & 0x3ff) << 22) +#define SSC_SFCON_PLEN_GET(val) ((((val) & SSC_SFCON_PLEN) >> 22) & 0x3ff) +#define SSC_SFCON_PLEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_PLEN) | (((val) & 0x3ff) << 22)) +/* Stop After Pause (20) */ +#define SSC_SFCON_STOP (0x1 << 20) +#define SSC_SFCON_STOP_VAL(val) (((val) & 0x1) << 20) +#define SSC_SFCON_STOP_GET(val) ((((val) & SSC_SFCON_STOP) >> 20) & 0x1) +#define SSC_SFCON_STOP_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_STOP) | (((val) & 0x1) << 20)) +/* Idle Clock Configuration (19:18) */ +#define SSC_SFCON_ICLK (0x3 << 18) +#define SSC_SFCON_ICLK_VAL(val) (((val) & 0x3) << 18) +#define SSC_SFCON_ICLK_GET(val) ((((val) & SSC_SFCON_ICLK) >> 18) & 0x3) +#define SSC_SFCON_ICLK_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_ICLK) | (((val) & 0x3) << 18)) +/* Idle Data Configuration (17:16) */ +#define SSC_SFCON_IDAT (0x3 << 16) +#define SSC_SFCON_IDAT_VAL(val) (((val) & 0x3) << 16) +#define SSC_SFCON_IDAT_GET(val) ((((val) & SSC_SFCON_IDAT) >> 16) & 0x3) +#define SSC_SFCON_IDAT_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_IDAT) | (((val) & 0x3) << 16)) +/* Data Length (15:4) */ +#define SSC_SFCON_DLEN (0xfff << 4) +#define SSC_SFCON_DLEN_VAL(val) (((val) & 0xfff) << 4) +#define SSC_SFCON_DLEN_GET(val) ((((val) & SSC_SFCON_DLEN) >> 4) & 0xfff) +#define SSC_SFCON_DLEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_DLEN) | (((val) & 0xfff) << 4)) +/* Enable Interrupt After Pause (3) */ +#define SSC_SFCON_IAEN (0x1 << 3) +#define SSC_SFCON_IAEN_VAL(val) (((val) & 0x1) << 3) +#define SSC_SFCON_IAEN_GET(val) ((((val) & SSC_SFCON_IAEN) >> 3) & 0x1) +#define SSC_SFCON_IAEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_IAEN) | (((val) & 0x1) << 3)) +/* Enable Interrupt Before Pause (2) */ +#define SSC_SFCON_IBEN (0x1 << 2) +#define SSC_SFCON_IBEN_VAL(val) (((val) & 0x1) << 2) +#define SSC_SFCON_IBEN_GET(val) ((((val) & SSC_SFCON_IBEN) >> 2) & 0x1) +#define SSC_SFCON_IBEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_IBEN) | (((val) & 0x1) << 2)) +/* Serial Frame Enable (0) */ +#define SSC_SFCON_SFEN (0x1) +#define SSC_SFCON_SFEN_VAL(val) (((val) & 0x1) << 0) +#define SSC_SFCON_SFEN_GET(val) ((((val) & SSC_SFCON_SFEN) >> 0) & 0x1) +#define SSC_SFCON_SFEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_SFEN) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * SFSTAT Register + ******************************************************************************/ + +/* Pause Count (31:22) */ +#define SSC_SFSTAT_PCNT (0x3ff << 22) +#define SSC_SFSTAT_PCNT_GET(val) ((((val) & SSC_SFSTAT_PCNT) >> 22) & 0x3ff) +/* Data Bit Count (15:4) */ +#define SSC_SFSTAT_DCNT (0xfff << 4) +#define SSC_SFSTAT_DCNT_GET(val) ((((val) & SSC_SFSTAT_DCNT) >> 4) & 0xfff) +/* Pause Busy (1) */ +#define SSC_SFSTAT_PBSY (0x1 << 1) +#define SSC_SFSTAT_PBSY_GET(val) ((((val) & SSC_SFSTAT_PBSY) >> 1) & 0x1) +/* Data Busy (0) */ +#define SSC_SFSTAT_DBSY (0x1) +#define SSC_SFSTAT_DBSY_GET(val) ((((val) & SSC_SFSTAT_DBSY) >> 0) & 0x1) + +/******************************************************************************* + * GPOCON Register + ******************************************************************************/ + +/* Output OUTn Is Chip Select (15:8) */ +#define SSC_GPOCON_ISCSBN (0xff << 8) +#define SSC_GPOCON_ISCSBN_VAL(val) (((val) & 0xff) << 8) +#define SSC_GPOCON_ISCSBN_GET(val) ((((val) & SSC_GPOCON_ISCSBN) >> 8) & 0xff) +#define SSC_GPOCON_ISCSBN_SET(reg,val) (reg) = ((reg & ~SSC_GPOCON_ISCSBN) | (((val) & 0xff) << 8)) +/* Invert Output OUTn (7:0) */ +#define SSC_GPOCON_INVOUTN (0xff) +#define SSC_GPOCON_INVOUTN_VAL(val) (((val) & 0xff) << 0) +#define SSC_GPOCON_INVOUTN_GET(val) ((((val) & SSC_GPOCON_INVOUTN) >> 0) & 0xff) +#define SSC_GPOCON_INVOUTN_SET(reg,val) (reg) = ((reg & ~SSC_GPOCON_INVOUTN) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * GPOSTAT Register + ******************************************************************************/ + +/* Output Register Bit n (7:0) */ +#define SSC_GPOSTAT_OUTN (0xff) +#define SSC_GPOSTAT_OUTN_GET(val) ((((val) & SSC_GPOSTAT_OUTN) >> 0) & 0xff) + +/******************************************************************************* + * WHBGPOSTAT + ******************************************************************************/ + +/* Set Output Register Bit n (15:8) */ +#define SSC_WHBGPOSTAT_SETOUTN (0xff << 8) +#define SSC_WHBGPOSTAT_SETOUTN_VAL(val) (((val) & 0xff) << 8) +#define SSC_WHBGPOSTAT_SETOUTN_SET(reg,val) (reg) = (((reg & ~SSC_WHBGPOSTAT_SETOUTN) | (val) & 1) << 8) +/* Clear Output Register Bit n (7:0) */ +#define SSC_WHBGPOSTAT_CLROUTN (0xff) +#define SSC_WHBGPOSTAT_CLROUTN_VAL(val) (((val) & 0xff) << 0) +#define SSC_WHBGPOSTAT_CLROUTN_SET(reg,val) (reg) = (((reg & ~SSC_WHBGPOSTAT_CLROUTN) | (val) & 1) << 0) + +/******************************************************************************* + * RXREQ Register + ******************************************************************************/ + +/* Receive Count Value (15:0) */ +#define SSC_RXREQ_RXCNT (0xffff) +#define SSC_RXREQ_RXCNT_VAL(val) (((val) & 0xffff) << 0) +#define SSC_RXREQ_RXCNT_GET(val) ((((val) & SSC_RXREQ_RXCNT) >> 0) & 0xffff) +#define SSC_RXREQ_RXCNT_SET(reg,val) (reg) = ((reg & ~SSC_RXREQ_RXCNT) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * RXCNT Register + ******************************************************************************/ + +/* Receive To Do Value (15:0) */ +#define SSC_RXCNT_TODO (0xffff) +#define SSC_RXCNT_TODO_GET(val) ((((val) & SSC_RXCNT_TODO) >> 0) & 0xffff) + +/******************************************************************************* + * DMA_CON Register + ******************************************************************************/ + +/* Receive Class (3:2) */ +#define SSC_DMA_CON_RXCLS (0x3 << 2) +#define SSC_DMA_CON_RXCLS_VAL(val) (((val) & 0x3) << 2) +#define SSC_DMA_CON_RXCLS_GET(val) ((((val) & SSC_DMA_CON_RXCLS) >> 2) & 0x3) +#define SSC_DMA_CON_RXCLS_SET(reg,val) (reg) = ((reg & ~SSC_DMA_CON_RXCLS) | (((val) & 0x3) << 2)) +/* Transmit Path On (1) */ +#define SSC_DMA_CON_TXON (0x1 << 1) +#define SSC_DMA_CON_TXON_VAL(val) (((val) & 0x1) << 1) +#define SSC_DMA_CON_TXON_GET(val) ((((val) & SSC_DMA_CON_TXON) >> 1) & 0x1) +#define SSC_DMA_CON_TXON_SET(reg,val) (reg) = ((reg & ~SSC_DMA_CON_TXON) | (((val) & 0x1) << 1)) +/* Receive Path On (0) */ +#define SSC_DMA_CON_RXON (0x1) +#define SSC_DMA_CON_RXON_VAL(val) (((val) & 0x1) << 0) +#define SSC_DMA_CON_RXON_GET(val) ((((val) & SSC_DMA_CON_RXON) >> 0) & 0x1) +#define SSC_DMA_CON_RXON_SET(reg,val) (reg) = ((reg & ~SSC_DMA_CON_RXON) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * IRNEN Register + ******************************************************************************/ + +/* Frame End Interrupt Request Enable (3) */ +#define SSC_IRNEN_F (0x1 << 3) +#define SSC_IRNEN_F_VAL(val) (((val) & 0x1) << 3) +#define SSC_IRNEN_F_GET(val) ((((val) & SSC_IRNEN_F) >> 3) & 0x1) +#define SSC_IRNEN_F_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_F) | (((val) & 0x1) << 3)) +/* Error Interrupt Request Enable (2) */ +#define SSC_IRNEN_E (0x1 << 2) +#define SSC_IRNEN_E_VAL(val) (((val) & 0x1) << 2) +#define SSC_IRNEN_E_GET(val) ((((val) & SSC_IRNEN_E) >> 2) & 0x1) +#define SSC_IRNEN_E_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_E) | (((val) & 0x1) << 2)) +/* Receive Interrupt Request Enable (1) */ +#define SSC_IRNEN_R (0x1 << 1) +#define SSC_IRNEN_R_VAL(val) (((val) & 0x1) << 1) +#define SSC_IRNEN_R_GET(val) ((((val) & SSC_IRNEN_R) >> 1) & 0x1) +#define SSC_IRNEN_R_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_R) | (((val) & 0x1) << 1)) +/* Transmit Interrupt Request Enable (0) */ +#define SSC_IRNEN_T (0x1) +#define SSC_IRNEN_T_VAL(val) (((val) & 0x1) << 0) +#define SSC_IRNEN_T_GET(val) ((((val) & SSC_IRNEN_T) >> 0) & 0x1) +#define SSC_IRNEN_T_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_T) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * IRNICR Register + ******************************************************************************/ + +/* Frame End Interrupt Request (3) */ +#define SSC_IRNICR_F (0x1 << 3) +#define SSC_IRNICR_F_GET(val) ((((val) & SSC_IRNICR_F) >> 3) & 0x1) +/* Error Interrupt Request (2) */ +#define SSC_IRNICR_E (0x1 << 2) +#define SSC_IRNICR_E_GET(val) ((((val) & SSC_IRNICR_E) >> 2) & 0x1) +/* Receive Interrupt Request (1) */ +#define SSC_IRNICR_R (0x1 << 1) +#define SSC_IRNICR_R_GET(val) ((((val) & SSC_IRNICR_R) >> 1) & 0x1) +/* Transmit Interrupt Request (0) */ +#define SSC_IRNICR_T (0x1) +#define SSC_IRNICR_T_GET(val) ((((val) & SSC_IRNICR_T) >> 0) & 0x1) + +/******************************************************************************* + * IRNCR Register + ******************************************************************************/ + +/* Frame End Interrupt Request (3) */ +#define SSC_IRNCR_F (0x1 << 3) +#define SSC_IRNCR_F_GET(val) ((((val) & SSC_IRNCR_F) >> 3) & 0x1) +/* Error Interrupt Request (2) */ +#define SSC_IRNCR_E (0x1 << 2) +#define SSC_IRNCR_E_GET(val) ((((val) & SSC_IRNCR_E) >> 2) & 0x1) +/* Receive Interrupt Request (1) */ +#define SSC_IRNCR_R (0x1 << 1) +#define SSC_IRNCR_R_GET(val) ((((val) & SSC_IRNCR_R) >> 1) & 0x1) +/* Transmit Interrupt Request (0) */ +#define SSC_IRNCR_T (0x1) +#define SSC_IRNCR_T_GET(val) ((((val) & SSC_IRNCR_T) >> 0) & 0x1) + +#endif /* __SSC_H */ diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/status_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/status_reg.h new file mode 100644 index 000000000..100230fa7 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/status_reg.h @@ -0,0 +1,130 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __STATUS_REG_H +#define __STATUS_REG_H + +#define status_r32(reg) ltq_r32(&status->reg) +#define status_w32(val, reg) ltq_w32(val, &status->reg) +#define status_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &status->reg) + +/** STATUS register structure */ +struct svip_reg_status { + unsigned long fuse_deu; /* 0x0000 */ + unsigned long fuse_cpu; /* 0x0004 */ + unsigned long fuse_pll; /* 0x0008 */ + unsigned long chipid; /* 0x000C */ + unsigned long config; /* 0x0010 */ + unsigned long chip_loc; /* 0x0014 */ + unsigned long fuse_spare; /* 0x0018 */ +}; + +/******************************************************************************* + * Fuse for DEU Settings + ******************************************************************************/ + +/* Fuse for Enabling the TRNG (6) */ +#define STATUS_FUSE_DEU_TRNG (0x1 << 6) +#define STATUS_FUSE_DEU_TRNG_GET(val) ((((val) & STATUS_FUSE_DEU_TRNG) >> 6) & 0x1) +/* Fuse for Enabling the DES Submodule (5) */ +#define STATUS_FUSE_DEU_DES (0x1 << 5) +#define STATUS_FUSE_DEU_DES_GET(val) ((((val) & STATUS_FUSE_DEU_DES) >> 5) & 0x1) +/* Fuse for Enabling the 3DES Submodule (4) */ +#define STATUS_FUSE_DEU_3DES (0x1 << 4) +#define STATUS_FUSE_DEU_3DES_GET(val) ((((val) & STATUS_FUSE_DEU_3DES) >> 4) & 0x1) +/* Fuse for Enabling the AES Submodule (3) */ +#define STATUS_FUSE_DEU_AES (0x1 << 3) +#define STATUS_FUSE_DEU_AES_GET(val) ((((val) & STATUS_FUSE_DEU_AES) >> 3) & 0x1) +/* Fuse for Enabling the HASH Submodule (2) */ +#define STATUS_FUSE_DEU_HASH (0x1 << 2) +#define STATUS_FUSE_DEU_HASH_GET(val) ((((val) & STATUS_FUSE_DEU_HASH) >> 2) & 0x1) +/* Fuse for Enabling the ARC4 Submodule (1) */ +#define STATUS_FUSE_DEU_ARC4 (0x1 << 1) +#define STATUS_FUSE_DEU_ARC4_GET(val) ((((val) & STATUS_FUSE_DEU_ARC4) >> 1) & 0x1) +/* Fuse for Enabling the DEU Module (0) */ +#define STATUS_FUSE_DEU_DEU (0x1) +#define STATUS_FUSE_DEU_DEU_GET(val) ((((val) & STATUS_FUSE_DEU_DEU) >> 0) & 0x1) + +/******************************************************************************* + * Fuse for CPU Settings + ******************************************************************************/ + +/* Fuse for Enabling CPU5 (5) */ +#define STATUS_FUSE_CPU_CPU5 (0x1 << 5) +#define STATUS_FUSE_CPU_CPU5_GET(val) ((((val) & STATUS_FUSE_CPU_CPU5) >> 5) & 0x1) +/* Fuse for Enabling the CPU4 (4) */ +#define STATUS_FUSE_CPU_CPU4 (0x1 << 4) +#define STATUS_FUSE_CPU_CPU4_GET(val) ((((val) & STATUS_FUSE_CPU_CPU4) >> 4) & 0x1) +/* Fuse for Enabling the CPU3 (3) */ +#define STATUS_FUSE_CPU_CPU3 (0x1 << 3) +#define STATUS_FUSE_CPU_CPU3_GET(val) ((((val) & STATUS_FUSE_CPU_CPU3) >> 3) & 0x1) +/* Fuse for Enabling the CPU2 (2) */ +#define STATUS_FUSE_CPU_CPU2 (0x1 << 2) +#define STATUS_FUSE_CPU_CPU2_GET(val) ((((val) & STATUS_FUSE_CPU_CPU2) >> 2) & 0x1) +/* Fuse for Enabling the CPU1 (1) */ +#define STATUS_FUSE_CPU_CPU1 (0x1 << 1) +#define STATUS_FUSE_CPU_CPU1_GET(val) ((((val) & STATUS_FUSE_CPU_CPU1) >> 1) & 0x1) +/* Fuse for Enabling the CPU0 (0) */ +#define STATUS_FUSE_CPU_CPU0 (0x1) +#define STATUS_FUSE_CPU_CPU0_GET(val) ((((val) & STATUS_FUSE_CPU_CPU0) >> 0) & 0x1) + +/******************************************************************************* + * Fuse for PLL Settings + ******************************************************************************/ + +/* Fuse for Enabling PLL (7:0) */ +#define STATUS_FUSE_PLL_PLL (0xff) +#define STATUS_FUSE_PLL_PLL_GET(val) ((((val) & STATUS_FUSE_PLL_PLL) >> 0) & 0xff) + +/******************************************************************************* + * Chip Identification Register + ******************************************************************************/ + +/* Chip Version Number (31:28) */ +#define STATUS_CHIPID_VERSION (0xf << 28) +#define STATUS_CHIPID_VERSION_GET(val) ((((val) & STATUS_CHIPID_VERSION) >> 28) & 0xf) +/* Part Number (27:12) */ +#define STATUS_CHIPID_PART_NUMBER (0xffff << 12) +#define STATUS_CHIPID_PART_NUMBER_GET(val) ((((val) & STATUS_CHIPID_PART_NUMBER) >> 12) & 0xffff) +/* Manufacturer ID (11:1) */ +#define STATUS_CHIPID_MANID (0x7ff << 1) +#define STATUS_CHIPID_MANID_GET(val) ((((val) & STATUS_CHIPID_MANID) >> 1) & 0x7ff) + +/******************************************************************************* + * Chip Configuration Register + ******************************************************************************/ + +/* Number of Analog Channels (8:5) */ +#define STATUS_CONFIG_ANA_CHAN (0xf << 5) +#define STATUS_CONFIG_ANA_CHAN_GET(val) ((((val) & STATUS_CONFIG_ANA_CHAN) >> 5) & 0xf) +/* Clock Mode (4) */ +#define STATUS_CONFIG_CLK_MODE (0x1 << 1) +#define STATUS_CONFIG_CLK_MODE_GET(val) ((((val) & STATUS_CONFIG_CLK_MODE) >> 4) & 0x1) +/* Subversion Number (3:0) */ +#define STATUS_CONFIG_SUB_VERS (0xF) +#define STATUS_CONFIG_SUB_VERS_GET(val) ((((val) & STATUS_SUBVER_SUB_VERS) >> 0) & 0xF) + +/******************************************************************************* + * Chip Location Register + ******************************************************************************/ + +/* Chip Lot ID (31:16) */ +#define STATUS_CHIP_LOC_CHIP_LOT (0xffff << 16) +#define STATUS_CHIP_LOC_CHIP_LOT_GET(val) ((((val) & STATUS_CHIP_LOC_CHIP_LOT) >> 16) & 0xffff) +/* Chip X Coordinate (15:8) */ +#define STATUS_CHIP_LOC_CHIP_X (0xff << 8) +#define STATUS_CHIP_LOC_CHIP_X_GET(val) ((((val) & STATUS_CHIP_LOC_CHIP_X) >> 8) & 0xff) +/* Chip Y Coordinate (7:0) */ +#define STATUS_CHIP_LOC_CHIP_Y (0xff) +#define STATUS_CHIP_LOC_CHIP_Y_GET(val) ((((val) & STATUS_CHIP_LOC_CHIP_Y) >> 0) & 0xff) + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h new file mode 100644 index 000000000..5c34bb690 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h @@ -0,0 +1,245 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#ifndef __SVIP_DMA_H +#define __SVIP_DMA_H + +#define LTQ_DMA_CH_ON 1 +#define LTQ_DMA_CH_OFF 0 +#define LTQ_DMA_CH_DEFAULT_WEIGHT 100; + +#define DMA_OWN 1 +#define CPU_OWN 0 +#define DMA_MAJOR 250 + +/* Descriptors */ +#define DMA_DESC_OWN_CPU 0x0 +#define DMA_DESC_OWN_DMA 0x80000000 +#define DMA_DESC_CPT_SET 0x40000000 +#define DMA_DESC_SOP_SET 0x20000000 +#define DMA_DESC_EOP_SET 0x10000000 + +struct rx_desc { + union { + struct { +#ifdef CONFIG_CPU_LITTLE_ENDIAN + volatile u32 data_length:16; + volatile u32 reserve2:7; + volatile u32 byte_offset:2; + volatile u32 reserve1:3; + volatile u32 eop:1; + volatile u32 sop:1; + volatile u32 c:1; + volatile u32 own:1; +#else + volatile u32 own:1; + volatile u32 c:1; + volatile u32 sop:1; + volatile u32 eop:1; + volatile u32 reserve1:3; + volatile u32 byte_offset:2; + volatile u32 reserve2:7; + volatile u32 data_length:16; +#endif + } field; + + volatile u32 word; + } status; + + volatile u32 data_pointer; +}; + +struct tx_desc { + union { + struct { +#ifdef CONFIG_CPU_LITTLE_ENDIAN + volatile u32 data_length:16; + volatile u32 reserved:7; + volatile u32 byte_offset:5; + volatile u32 eop:1; + volatile u32 sop:1; + volatile u32 c:1; + volatile u32 own:1; +#else + volatile u32 own:1; + volatile u32 c:1; + volatile u32 sop:1; + volatile u32 eop:1; + volatile u32 byte_offset:5; + volatile u32 reserved:7; + volatile u32 data_length:16; +#endif + } field; + + volatile u32 word; + } status; + + volatile u32 data_pointer; +}; + +/* DMA pseudo interrupts notified to switch driver */ +#define RCV_INT 0x01 +#define TX_BUF_FULL_INT 0x02 +#define TRANSMIT_CPT_INT 0x04 +#define CHANNEL_CLOSED 0x10 + +/* Parameters for switch DMA device */ +#define DEFAULT_SW_CHANNEL_WEIGHT 3 +#define DEFAULT_SW_PORT_WEIGHT 7 + +#define DEFAULT_SW_TX_BURST_LEN 2 /* 2 words, 4 words, 8 words */ +#define DEFAULT_SW_RX_BURST_LEN 2 /* 2 words, 4 words, 8 words */ + +#define DEFAULT_SW_TX_CHANNEL_NUM 4 +#define DEFAULT_SW_RX_CHANNEL_NUM 4 + +#define DEFAULT_SW_TX_CHANNEL_DESCR_NUM 20 +#define DEFAULT_SW_RX_CHANNEL_DESCR_NUM 20 + +/* Parameters for SSC DMA device */ +#define DEFAULT_SSC_CHANNEL_WEIGHT 3 +#define DEFAULT_SSC_PORT_WEIGHT 7 + +#define DEFAULT_SSC_TX_CHANNEL_CLASS 3 +#define DEFAULT_SSC_RX_CHANNEL_CLASS 0 + +#define DEFAULT_SSC_TX_BURST_LEN 2 /* 2 words, 4 words, 8 words */ +#define DEFAULT_SSC_RX_BURST_LEN 2 /* 2 words, 4 words, 8 words */ + +#define DEFAULT_SSC0_TX_CHANNEL_NUM 1 +#define DEFAULT_SSC0_RX_CHANNEL_NUM 1 +#define DEFAULT_SSC1_TX_CHANNEL_NUM 1 +#define DEFAULT_SSC1_RX_CHANNEL_NUM 1 + +#define DEFAULT_SSC_TX_CHANNEL_DESCR_NUM 10 +#define DEFAULT_SSC_RX_CHANNEL_DESCR_NUM 10 + +/* Parameters for memory DMA device */ +#define DEFAULT_MEM_CHANNEL_WEIGHT 3 +#define DEFAULT_MEM_PORT_WEIGHT 7 + +#define DEFAULT_MEM_TX_BURST_LEN 4 /* 2 words, 4 words, 8 words */ +#define DEFAULT_MEM_RX_BURST_LEN 4 /* 2 words, 4 words, 8 words */ + +#define DEFAULT_MEM_TX_CHANNEL_NUM 1 +#define DEFAULT_MEM_RX_CHANNEL_NUM 1 + +#define DEFAULT_MEM_TX_CHANNEL_DESCR_NUM 2 +#define DEFAULT_MEM_RX_CHANNEL_DESCR_NUM 2 + +/* Parameters for DEU DMA device */ +#define DEFAULT_DEU_CHANNEL_WEIGHT 1 +#define DEFAULT_DEU_PORT_WEIGHT 1 + +#define DEFAULT_DEU_TX_BURST_LEN 4 /* 2 words, 4 words, 8 words */ +#define DEFAULT_DEU_RX_BURST_LEN 4 /* 2 words, 4 words, 8 words */ + +#define DEFAULT_DEU_TX_CHANNEL_DESCR_NUM 20 +#define DEFAULT_DEU_RX_CHANNEL_DESCR_NUM 20 + +#define DMA_DESCR_NUM 30 /* number of descriptors per channel */ + +enum dma_dir_t { + DIR_RX = 0, + DIR_TX = 1, +}; + +struct dma_device_info; + +struct dma_channel_info { + /*Pointer to the peripheral device who is using this channel*/ + /*const*/ struct dma_device_info *dma_dev; + /*direction*/ + const enum dma_dir_t dir; /*RX or TX*/ + /*class for this channel for QoS*/ + int pri; + /*irq number*/ + const int irq; + /*relative channel number*/ + const int rel_chan_no; + /*absolute channel number*/ + int abs_chan_no; + + /*specify byte_offset*/ + int byte_offset; + int tx_weight; + + /*descriptor parameter*/ + int desc_base; + int desc_len; + int curr_desc; + int prev_desc;/*only used if it is a tx channel*/ + + /*weight setting for WFQ algorithm*/ + int weight; + int default_weight; + + int packet_size; + + /*status of this channel*/ + int control; /*on or off*/ + int xfer_cnt; + int dur; /*descriptor underrun*/ + + /**optional information for the upper layer devices*/ + void *opt[DMA_DESCR_NUM]; + + /*channel operations*/ + int (*open)(struct dma_channel_info *ch); + int (*close)(struct dma_channel_info *ch); + int (*reset)(struct dma_channel_info *ch); + void (*enable_irq)(struct dma_channel_info *ch); + void (*disable_irq)(struct dma_channel_info *ch); +}; + + +struct dma_device_info { + /*device name of this peripheral*/ + const char device_name[16]; + const int max_rx_chan_num; + const int max_tx_chan_num; + int drop_enable; + + int reserved; + + int tx_burst_len; + int rx_burst_len; + int tx_weight; + + int current_tx_chan; + int current_rx_chan; + int num_tx_chan; + int num_rx_chan; + int tx_endianness_mode; + int rx_endianness_mode; + struct dma_channel_info *tx_chan[4]; + struct dma_channel_info *rx_chan[4]; + + /*functions, optional*/ + u8 *(*buffer_alloc)(int len,int *offset, void **opt); + void (*buffer_free)(u8 *dataptr, void *opt); + int (*intr_handler)(struct dma_device_info *dma_dev, int status); + + /* used by peripheral driver only */ + void *priv; +}; + +struct dma_device_info *dma_device_reserve(char *dev_name); +int dma_device_release(struct dma_device_info *dma_dev); +int dma_device_register(struct dma_device_info *dma_dev); +int dma_device_unregister(struct dma_device_info *dma_dev); +int dma_device_read(struct dma_device_info *dma_dev, u8 **dataptr, void **opt); +int dma_device_write(struct dma_device_info *dma_dev, u8 *dataptr, + int len, void *opt); + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h new file mode 100644 index 000000000..bca8df9fd --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h @@ -0,0 +1,35 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2010 Lantiq + */ +#ifndef __SVIP_IRQ_H +#define __SVIP_IRQ_H + +#define IM_NUM 6 + +#define INT_NUM_IRQ0 8 +#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) +#define INT_NUM_IM1_IRL0 (INT_NUM_IM0_IRL0 + 32) +#define INT_NUM_IM2_IRL0 (INT_NUM_IM1_IRL0 + 32) +#define INT_NUM_IM3_IRL0 (INT_NUM_IM2_IRL0 + 32) +#define INT_NUM_IM4_IRL0 (INT_NUM_IM3_IRL0 + 32) +#define INT_NUM_EXTRA_START (INT_NUM_IM4_IRL0 + 32) +#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0) + +#define INT_NUM_IM5_IRL0 (INT_NUM_IRQ0 + 160) +#define MIPS_CPU_TIMER_IRQ (INT_NUM_IM5_IRL0 + 2) + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h new file mode 100644 index 000000000..8ca3285f2 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h @@ -0,0 +1,467 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#ifndef __SVIP_MUX_H +#define __SVIP_MUX_H + +#define LTQ_MUX_P0_PINS 20 +#define LTQ_MUX_P1_PINS 20 +#define LTQ_MUX_P2_PINS 19 +#define LTQ_MUX_P3_PINS 20 +#define LTQ_MUX_P4_PINS 24 + +struct ltq_mux_pin { + int dirin; + int puen; + int altsel0; + int altsel1; +}; + +struct ltq_mux_settings { + const struct ltq_mux_pin *mux_p0; + const struct ltq_mux_pin *mux_p1; + const struct ltq_mux_pin *mux_p2; + const struct ltq_mux_pin *mux_p3; + const struct ltq_mux_pin *mux_p4; +}; + +#define LTQ_MUX_P0_19_EXINT16 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_19 { 0, 0, 1, 0 } + +#define LTQ_MUX_P0_18_EJ_BRKIN { 1, 0, 0, 0 } +#define LTQ_MUX_P0_18 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_18_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_17_EXINT10 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_17 { 0, 0, 0, 0 } +#define LTQ_MUX_P0_17_ASC1_RXD { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_16_EXINT9 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_16 { 0, 0, 0, 0 } +#define LTQ_MUX_P0_16_ASC1_TXD { 0, 0, 1, 0 } + +#define LTQ_MUX_P0_15_EXINT8 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_15 { 0, 0, 0, 0 } +#define LTQ_MUX_P0_15_ASC0_RXD { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_14_EXINT7 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_14 { 0, 0, 0, 0 } +#define LTQ_MUX_P0_14_ASC0_TXD { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_13_SSC0_CS7 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_13_EXINT6 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_13 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_13_SSC1_CS7 { 0, 0, 0, 1 } +#define LTQ_MUX_P0_13_SSC1_INT { 0, 0, 1, 1 } + +#define LTQ_MUX_P0_12_SSC0_CS6 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_12_EXINT5 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_12 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_12_SSC1_CS6 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_11_SSC0_CS5 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_11_EXINT4 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_11 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_11_SSC1_CS5 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_10_SSC0_CS4 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_10_EXINT3 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_10_SSC1_CS4 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_9_SSC0_CS3 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_9_EXINT2 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_9_SSC1_CS3 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_8_SSC0_CS2 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_8_EXINT1 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_8_SSC1_CS2 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_7_SSC0_CS1 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_7_EXINT0 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_7_SSC1_CS1 { 0, 0, 0, 1 } +#define LTQ_MUX_P0_7_SSC1_CS0 { 1, 0, 0, 1 } +#define LTQ_MUX_P0_7_SSC2_CS0 { 1, 0, 1, 1 } + +#define LTQ_MUX_P0_6_SSC0_CS0 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_6_IN { 1, 0, 1, 0 } +#define LTQ_MUX_P0_6_SSC1_CS0 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_5_SSC1_SCLK { 0, 0, 0, 0 } +#define LTQ_MUX_P0_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_5_IN { 1, 0, 1, 0 } +#define LTQ_MUX_P0_5_SSC2_CLK { 1, 0, 0, 1 } + +#define LTQ_MUX_P0_4_SSC1_MRST { 1, 0, 0, 0 } +#define LTQ_MUX_P0_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_4_IN { 1, 0, 1, 0 } +#define LTQ_MUX_P0_4_SSC2_MRST { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_3_SSC1_MTSR { 0, 0, 0, 0 } +#define LTQ_MUX_P0_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_3_IN { 1, 0, 1, 0 } +#define LTQ_MUX_P0_3_SSC2_MTSR { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_2_SSC0_SCLK { 0, 0, 0, 0 } +#define LTQ_MUX_P0_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_1_SSC0_MRST { 1, 0, 0, 0 } +#define LTQ_MUX_P0_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_0_SSC0_MTSR { 0, 0, 0, 0 } +#define LTQ_MUX_P0_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_0_IN { 1, 0, 1, 0 } + + +#define LTQ_MUX_P1_19_PCM3_TC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P1_19_EXINT15 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_19 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_18_PCM3_FSC { 0, 0, 0, 0 } +#define LTQ_MUX_P1_18_EXINT11 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_18 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_17_PCM3_PCL { 0, 0, 0, 0 } +#define LTQ_MUX_P1_17_EXINT12 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_17 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_16_PCM3_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_16_EXINT13 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_16 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_15_PCM3_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_15_EXINT14 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_15 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_14_PCM2_TC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P1_14 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_14_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_13_PCM2_FSC { 0, 0, 0, 0 } +#define LTQ_MUX_P1_13 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_13_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_12_PCM2_PCL { 0, 0, 0, 0 } +#define LTQ_MUX_P1_12 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_12_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_11_PCM2_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_11 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_11_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_10_PCM2_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_10_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_9_PCM1_TC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P1_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_9_IN { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_8_PCM1_FSC { 0, 0, 0, 0 } +#define LTQ_MUX_P1_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_8_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_7_PCM1_PCL { 0, 0, 0, 0 } +#define LTQ_MUX_P1_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_7_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_6_PCM1_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_6_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_5_PCM1_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_5_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_4_PCM0_TC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P1_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_4_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_3_PCM0_FSC { 0, 0, 0, 0 } +#define LTQ_MUX_P1_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_3_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_2_PCM0_PCL { 0, 0, 0, 0 } +#define LTQ_MUX_P1_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_1_PCM0_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_0_PCM0_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_0_IN { 1, 0, 1, 0 } + + +#define LTQ_MUX_P2_18_EBU_BC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_18 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_18_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_17_EBU_BC0 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_17 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_17_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_16_EBU_RDBY { 1, 0, 0, 0 } +#define LTQ_MUX_P2_16 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_16_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_15_EBU_WAIT { 1, 0, 0, 0 } +#define LTQ_MUX_P2_15 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_15_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_14_EBU_ALE { 0, 0, 0, 0 } +#define LTQ_MUX_P2_14 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_14_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_13_EBU_WR { 0, 0, 0, 0 } +#define LTQ_MUX_P2_13 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_13_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_12_EBU_RD { 0, 0, 0, 0 } +#define LTQ_MUX_P2_12 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_12_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_11_EBU_A11 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_11 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_11_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_10_EBU_A10 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_10_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_9_EBU_A9 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_9_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_8_EBU_A8 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_8_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_7_EBU_A7 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_7_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_6_EBU_A6 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_6_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_5_EBU_A5 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_5_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_4_EBU_A4 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_4_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_3_EBU_A3 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_3_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_2_EBU_A2 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_1_EBU_A1 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_0_EBU_A0 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_0_IN { 1, 0, 1, 0 } + + +#define LTQ_MUX_P3_19_EBU_CS3 { 0, 0, 0, 0 } +#define LTQ_MUX_P3_19 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_19_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_18_EBU_CS2 { 0, 0, 0, 0 } +#define LTQ_MUX_P3_18 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_18_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_17_EBU_CS1 { 0, 0, 0, 0 } +#define LTQ_MUX_P3_17 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_17_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_16_EBU_CS0 { 0, 0, 0, 0 } +#define LTQ_MUX_P3_16 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_16_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_15_EBU_AD15 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_15 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_15_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_14_EBU_AD14 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_14 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_14_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_13_EBU_AD13 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_13 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_13_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_12_EBU_AD12 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_12 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_12_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_11_EBU_AD11 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_11 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_11_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_10_EBU_AD10 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_10_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_9_EBU_AD9 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_9_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_8_EBU_AD8 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_8_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_7_EBU_AD7 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_7_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_6_EBU_AD6 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_6_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_5_EBU_AD5 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_5_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_4_EBU_AD4 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_4_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_3_EBU_AD3 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_3_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_2_EBU_AD2 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_1_EBU_AD1 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_0_EBU_AD0 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_0_IN { 1, 0, 1, 0 } + + +#define LTQ_MUX_P4_23_SSLIC7_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_23 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_23_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_22_SSLIC7_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_22 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_22_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_21_SSLIC7_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_21 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_21_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_20_SSLIC6_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_20 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_20_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_19_SSLIC6_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_19 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_19_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_18_SSLIC6_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_18 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_18_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_17_SSLIC5_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_17 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_17_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_16_SSLIC5_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_16 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_16_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_15_SSLIC5_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_15 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_15_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_14_SSLIC4_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_14 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_14_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_13_SSLIC4_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_13 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_13_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_12_SSLIC4_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_12 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_12_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_11_SSLIC3_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_11 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_11_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_10_SSLIC3_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_10_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_9_SSLIC3_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_9_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_8_SSLIC2_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_8_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_7_SSLIC2_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_7_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_6_SSLIC2_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_6_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_5_SSLIC1_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_5_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_4_SSLIC1_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_4_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_3_SSLIC1_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_3_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_2_SSLIC0_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_1_SSLIC0_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_0_SSLIC0_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_0_IN { 1, 0, 1, 0 } + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h new file mode 100644 index 000000000..732971185 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h @@ -0,0 +1,23 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#ifndef __SVIP_PMS_H +#define __SVIP_PMS_H + +void svip_sys1_clk_enable(u32 mask); +int svip_sys1_clk_is_enabled(u32 mask); + +void svip_sys2_clk_enable(u32 mask); +int svip_sys2_clk_is_enabled(u32 mask); + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h new file mode 100644 index 000000000..7428cccc8 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h @@ -0,0 +1,165 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __SYS0_REG_H +#define __SYS0_REG_H + +#define sys0_r32(reg) ltq_r32(&sys0->reg) +#define sys0_w32(val, reg) ltq_w32(val, &sys0->reg) +#define sys0_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &sys0->reg) + +/** SYS0 register structure */ +struct svip_reg_sys0 { + unsigned long sr; /* 0x0000 */ + unsigned long bcr; /* 0x0004 */ + unsigned long pll1cr; /* 0x0008 */ + unsigned long pll2cr; /* 0x000c */ + unsigned long tscr; /* 0x0010 */ + unsigned long phyclkr; /* 0x0014 */ +}; + +/******************************************************************************* + * SYS0 Status Register + ******************************************************************************/ + +/* Endian select pin (31) */ +#define SYS0_SR_ESEL (0x1 << 31) +#define SYS0_SR_ESEL_GET(val) ((((val) & SYS0_SR_ESEL) >> 31) & 0x1) +/* Boot mode pins (27:24) */ +#define SYS0_SR_BMODE (0xf << 24) +#define SYS0_SR_BMODE_GET(val) ((((val) & SYS0_SR_BMODE) >> 24) & 0xf) +/* PLL2 Lock (18) */ +#define SYS0_SR_PLL2LOCK (0x1 << 18) +#define SYS0_SR_PLL2LOCK_GET(val) ((((val) & SYS0_SR_PLL2LOCK) >> 18) & 0x1) +/* PLL1 Lock (17) */ +#define SYS0_SR_PLL1LOCK (0x1 << 17) +#define SYS0_SR_PLL1LOCK_GET(val) ((((val) & SYS0_SR_PLL1LOCK) >> 17) & 0x1) +/* Discrete Timing Oscillator Lock (16) */ +#define SYS0_SR_DTOLOCK (0x1 << 16) +#define SYS0_SR_DTOLOCK_GET(val) ((((val) & SYS0_SR_DTOLOCK) >> 16) & 0x1) +/* Hardware Reset Indication (1) */ +#define SYS0_SR_HRSTIN (0x1 << 1) +#define SYS0_SR_HRSTIN_VAL(val) (((val) & 0x1) << 1) +#define SYS0_SR_HRSTIN_GET(val) ((((val) & SYS0_SR_HRSTIN) >> 1) & 0x1) +#define SYS0_SR_HRSTIN_SET(reg,val) (reg) = ((reg & ~SYS0_SR_HRSTIN) | (((val) & 0x1) << 1)) +/* Power-on Reset Indication (0) */ +#define SYS0_SR_POR (0x1 << 0) +#define SYS0_SR_POR_VAL(val) (((val) & 0x1) << 0) +#define SYS0_SR_POR_GET(val) ((((val) & SYS0_SR_POR) >> 0) & 0x1) +#define SYS0_SR_POR_SET(reg,val) (reg) = ((reg & ~SYS0_SR_POR) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * SYS0 Boot Control Register + ******************************************************************************/ + +/* Configuration of Boot Source for CPU5 (25) */ +#define SYS0_BCR_BMODECPU5 (0x1 << 25) +#define SYS0_BCR_BMODECPU5_VAL(val) (((val) & 0x1) << 25) +#define SYS0_BCR_BMODECPU5_GET(val) ((((val) & SYS0_BCR_BMODECPU5) >> 25) & 0x1) +#define SYS0_BCR_BMODECPU5_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU5) | (((val) & 0x1) << 25)) +/* Configuration of Boot Source for CPU4 (24) */ +#define SYS0_BCR_BMODECPU4 (0x1 << 24) +#define SYS0_BCR_BMODECPU4_VAL(val) (((val) & 0x1) << 24) +#define SYS0_BCR_BMODECPU4_GET(val) ((((val) & SYS0_BCR_BMODECPU4) >> 24) & 0x1) +#define SYS0_BCR_BMODECPU4_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU4) | (((val) & 0x1) << 24)) +/* Configuration of Boot Source for CPU3 (23) */ +#define SYS0_BCR_BMODECPU3 (0x1 << 23) +#define SYS0_BCR_BMODECPU3_VAL(val) (((val) & 0x1) << 23) +#define SYS0_BCR_BMODECPU3_GET(val) ((((val) & SYS0_BCR_BMODECPU3) >> 23) & 0x1) +#define SYS0_BCR_BMODECPU3_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU3) | (((val) & 0x1) << 23)) +/* Configuration of Boot Source for CPU2 (22) */ +#define SYS0_BCR_BMODECPU2 (0x1 << 22) +#define SYS0_BCR_BMODECPU2_VAL(val) (((val) & 0x1) << 22) +#define SYS0_BCR_BMODECPU2_GET(val) ((((val) & SYS0_BCR_BMODECPU2) >> 22) & 0x1) +#define SYS0_BCR_BMODECPU2_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU2) | (((val) & 0x1) << 22)) +/* Configuration of Boot Source for CPU1 (21) */ +#define SYS0_BCR_BMODECPU1 (0x1 << 21) +#define SYS0_BCR_BMODECPU1_VAL(val) (((val) & 0x1) << 21) +#define SYS0_BCR_BMODECPU1_GET(val) ((((val) & SYS0_BCR_BMODECPU1) >> 21) & 0x1) +#define SYS0_BCR_BMODECPU1_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU1) | (((val) & 0x1) << 21)) +/* Configuration of Boot Source for CPU0 (20:16) */ +#define SYS0_BCR_BMODECPU0 (0x1f << 16) +#define SYS0_BCR_BMODECPU0_VAL(val) (((val) & 0x1f) << 16) +#define SYS0_BCR_BMODECPU0_GET(val) ((((val) & SYS0_BCR_BMODECPU0) >> 16) & 0x1f) +#define SYS0_BCR_BMODECPU0_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU0) | (((val) & 0x1f) << 16)) +/* Configuration of Endianess for CPU5 (5) */ +#define SYS0_BCR_ESELCPU5 (0x1 << 5) +#define SYS0_BCR_ESELCPU5_VAL(val) (((val) & 0x1) << 5) +#define SYS0_BCR_ESELCPU5_GET(val) ((((val) & SYS0_BCR_ESELCPU5) >> 5) & 0x1) +#define SYS0_BCR_ESELCPU5_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU5) | (((val) & 0x1) << 5)) +/* Configuration of Endianess for CPU4 (4) */ +#define SYS0_BCR_ESELCPU4 (0x1 << 4) +#define SYS0_BCR_ESELCPU4_VAL(val) (((val) & 0x1) << 4) +#define SYS0_BCR_ESELCPU4_GET(val) ((((val) & SYS0_BCR_ESELCPU4) >> 4) & 0x1) +#define SYS0_BCR_ESELCPU4_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU4) | (((val) & 0x1) << 4)) +/* Configuration of Endianess for CPU3 (3) */ +#define SYS0_BCR_ESELCPU3 (0x1 << 3) +#define SYS0_BCR_ESELCPU3_VAL(val) (((val) & 0x1) << 3) +#define SYS0_BCR_ESELCPU3_GET(val) ((((val) & SYS0_BCR_ESELCPU3) >> 3) & 0x1) +#define SYS0_BCR_ESELCPU3_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU3) | (((val) & 0x1) << 3)) +/* Configuration of Endianess for CPU2 (2) */ +#define SYS0_BCR_ESELCPU2 (0x1 << 2) +#define SYS0_BCR_ESELCPU2_VAL(val) (((val) & 0x1) << 2) +#define SYS0_BCR_ESELCPU2_GET(val) ((((val) & SYS0_BCR_ESELCPU2) >> 2) & 0x1) +#define SYS0_BCR_ESELCPU2_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU2) | (((val) & 0x1) << 2)) +/* Configuration of Endianess for CPU1 (1) */ +#define SYS0_BCR_ESELCPU1 (0x1 << 1) +#define SYS0_BCR_ESELCPU1_VAL(val) (((val) & 0x1) << 1) +#define SYS0_BCR_ESELCPU1_GET(val) ((((val) & SYS0_BCR_ESELCPU1) >> 1) & 0x1) +#define SYS0_BCR_ESELCPU1_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU1) | (((val) & 0x1) << 1)) +/* Configuration of Endianess for CPU0 (0) */ +#define SYS0_BCR_ESELCPU0 (0x1) +#define SYS0_BCR_ESELCPU0_VAL(val) (((val) & 0x1) << 0) +#define SYS0_BCR_ESELCPU0_GET(val) ((((val) & SYS0_BCR_ESELCPU0) >> 0) & 0x1) +#define SYS0_BCR_ESELCPU0_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PLL1 Control Register + ******************************************************************************/ + +/* PLL1 Bypass Enable (31) */ +#define SYS0_PLL1CR_OSCBYP (0x1 << 31) +#define SYS0_PLL1CR_OSCBYP_VAL(val) (((val) & 0x1) << 31) +#define SYS0_PLL1CR_OSCBYP_GET(val) ((((val) & SYS0_PLL1CR_OSCBYP) >> 31) & 0x1) +#define SYS0_PLL1CR_OSCBYP_SET(reg,val) (reg) = ((reg & ~SYS0_PLL1CR_OSCBYP) | (((val) & 0x1) << 31)) +/* PLL1 Divider Value (1:0) */ +#define SYS0_PLL1CR_PLLDIV (0x3) +#define SYS0_PLL1CR_PLLDIV_VAL(val) (((val) & 0x3) << 0) +#define SYS0_PLL1CR_PLLDIV_GET(val) ((((val) & SYS0_PLL1CR_PLLDIV) >> 0) & 0x3) +#define SYS0_PLL1CR_PLLDIV_SET(reg,val) (reg) = ((reg & ~SYS0_PLL1CR_PLLDIV) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * PLL2 Control Register + ******************************************************************************/ + +/* PLL2 clear deepsleep (31) */ +#define SYS0_PLL2CR_CLRDS (0x1 << 31) +#define SYS0_PLL2CR_CLRDS_VAL(val) (((val) & 0x1) << 31) +#define SYS0_PLL2CR_CLRDS_GET(val) ((((val) & SYS0_PLL2CR_CLRDS) >> 31) & 0x1) +#define SYS0_PLL2CR_CLRDS_SET(reg,val) (reg) = ((reg & ~SYS0_PLL2CR_CLRDS) | (((val) & 0x1) << 31)) +/* PLL2 set deepsleep (30) */ +#define SYS0_PLL2CR_SETDS (0x1 << 30) +#define SYS0_PLL2CR_SETDS_VAL(val) (((val) & 0x1) << 30) +#define SYS0_PLL2CR_SETDS_GET(val) ((((val) & SYS0_PLL2CR_SETDS) >> 30) & 0x1) +#define SYS0_PLL2CR_SETDS_SET(reg,val) (reg) = ((reg & ~SYS0_PLL2CR_SETDS) | (((val) & 0x1) << 30)) +/* PLL2 Fractional division enable (16) */ +#define SYS0_PLL2CR_FRACTEN (0x1 << 16) +#define SYS0_PLL2CR_FRACTEN_VAL(val) (((val) & 0x1) << 16) +#define SYS0_PLL2CR_FRACTEN_GET(val) ((((val) & SYS0_PLL2CR_FRACTEN) >> 16) & 0x1) +#define SYS0_PLL2CR_FRACTEN_SET(reg,val) (reg) = ((reg & ~SYS0_PLL2CR_FRACTEN) | (((val) & 0x1) << 16)) +/* PLL2 Fractional division value (9:0) */ +#define SYS0_FRACTVAL (0x3f) +#define SYS0_FRACTVAL_VAL(val) (((val) & 0x3f) << 0) +#define SYS0_FRACTVAL_GET(val) ((((val) & SYS0_FRACTVAL) >> 0) & 0x3f) +#define SYS0_FRACTVAL_SET(reg,val) (reg) = ((reg & ~SYS0_FRACTVAL) | (((val) & 0x3f) << 0)) + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h new file mode 100644 index 000000000..e0c2e84b1 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h @@ -0,0 +1,370 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __SYS1_REG_H +#define __SYS1_REG_H + +#define sys1_r32(reg) ltq_r32(&sys1->reg) +#define sys1_w32(val, reg) ltq_w32(val, &sys1->reg) +#define sys1_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &sys1->reg) + +/** SYS1 register structure */ +struct svip_reg_sys1 { + unsigned long clksr; /* 0x0000 */ + unsigned long clkenr; /* 0x0004 */ + unsigned long clkclr; /* 0x0008 */ + unsigned long reserved0[1]; + unsigned long l2ccr; /* 0x0010 */ + unsigned long fpicr; /* 0x0014 */ + unsigned long wdtcr; /* 0x0018 */ + unsigned long reserved1[1]; + unsigned long cpucr[6]; /* 0x0020 */ + unsigned long reserved2[2]; + unsigned long rsr; /* 0x0040 */ + unsigned long rreqr; /* 0x0044 */ + unsigned long rrlsr; /* 0x0048 */ + unsigned long rbtr; /* 0x004c */ + unsigned long irncr; /* 0x0050 */ + unsigned long irnicr; /* 0x0054 */ + unsigned long irnen; /* 0x0058 */ + unsigned long reserved3[1]; + unsigned long cpursr[6]; /* 0x0060 */ + unsigned long reserved4[2]; + unsigned long cpusrssr[6]; /* 0x0080 */ + unsigned long reserved5[2]; + unsigned long cpuwrssr[6]; /* 0x00a0 */ +}; + +/******************************************************************************* + * SYS1 Clock Status Register + ******************************************************************************/ +/* (r) Clock Enable for L2C */ +#define SYS1_CLKSR_L2C (0x1 << 31) +/* (r) Clock Enable for DDR2 */ +#define SYS1_CLKSR_DDR2 (0x1 << 30) +/* (r) Clock Enable for SMI2 */ +#define SYS1_CLKSR_SMI2 (0x1 << 29) +/* (r) Clock Enable for SMI1 */ +#define SYS1_CLKSR_SMI1 (0x1 << 28) +/* (r) Clock Enable for SMI0 */ +#define SYS1_CLKSR_SMI0 (0x1 << 27) +/* (r) Clock Enable for FMI0 */ +#define SYS1_CLKSR_FMI0 (0x1 << 26) +/* (r) Clock Enable for PORT0 */ +#define SYS1_CLKSR_PORT0 (0x1 << 0) +/* (r) Clock Enable for PCM3 */ +#define SYS1_CLKSR_PCM3 (0x1 << 19) +/* (r) Clock Enable for PCM2 */ +#define SYS1_CLKSR_PCM2 (0x1 << 18) +/* (r) Clock Enable for PCM1 */ +#define SYS1_CLKSR_PCM1 (0x1 << 17) +/* (r) Clock Enable for PCM0 */ +#define SYS1_CLKSR_PCM0 (0x1 << 16) +/* (r) Clock Enable for ASC1 */ +#define SYS1_CLKSR_ASC1 (0x1 << 15) +/* (r) Clock Enable for ASC0 */ +#define SYS1_CLKSR_ASC0 (0x1 << 14) +/* (r) Clock Enable for SSC2 */ +#define SYS1_CLKSR_SSC2 (0x1 << 13) +/* (r) Clock Enable for SSC1 */ +#define SYS1_CLKSR_SSC1 (0x1 << 12) +/* (r) Clock Enable for SSC0 */ +#define SYS1_CLKSR_SSC0 (0x1 << 11) +/* (r) Clock Enable for GPTC */ +#define SYS1_CLKSR_GPTC (0x1 << 10) +/* (r) Clock Enable for DMA */ +#define SYS1_CLKSR_DMA (0x1 << 9) +/* (r) Clock Enable for FSCT */ +#define SYS1_CLKSR_FSCT (0x1 << 8) +/* (r) Clock Enable for ETHSW */ +#define SYS1_CLKSR_ETHSW (0x1 << 7) +/* (r) Clock Enable for EBU */ +#define SYS1_CLKSR_EBU (0x1 << 6) +/* (r) Clock Enable for TRNG */ +#define SYS1_CLKSR_TRNG (0x1 << 5) +/* (r) Clock Enable for DEU */ +#define SYS1_CLKSR_DEU (0x1 << 4) +/* (r) Clock Enable for PORT3 */ +#define SYS1_CLKSR_PORT3 (0x1 << 3) +/* (r) Clock Enable for PORT2 */ +#define SYS1_CLKSR_PORT2 (0x1 << 2) +/* (r) Clock Enable for PORT1 */ +#define SYS1_CLKSR_PORT1 (0x1 << 1) + +/******************************************************************************* + * SYS1 Clock Enable Register + ******************************************************************************/ +/* (w) Clock Enable Request for L2C */ +#define SYS1_CLKENR_L2C (0x1 << 31) +/* (w) Clock Enable Request for DDR2 */ +#define SYS1_CLKENR_DDR2 (0x1 << 30) +/* (w) Clock Enable Request for SMI2 */ +#define SYS1_CLKENR_SMI2 (0x1 << 29) +/* (w) Clock Enable Request for SMI1 */ +#define SYS1_CLKENR_SMI1 (0x1 << 28) +/* (w) Clock Enable Request for SMI0 */ +#define SYS1_CLKENR_SMI0 (0x1 << 27) +/* (w) Clock Enable Request for FMI0 */ +#define SYS1_CLKENR_FMI0 (0x1 << 26) +/* (w) Clock Enable Request for PORT0 */ +#define SYS1_CLKENR_PORT0 (0x1 << 0) +/* (w) Clock Enable Request for PCM3 */ +#define SYS1_CLKENR_PCM3 (0x1 << 19) +/* (w) Clock Enable Request for PCM2 */ +#define SYS1_CLKENR_PCM2 (0x1 << 18) +/* (w) Clock Enable Request for PCM1 */ +#define SYS1_CLKENR_PCM1 (0x1 << 17) +/* (w) Clock Enable Request for PCM0 */ +#define SYS1_CLKENR_PCM0 (0x1 << 16) +/* (w) Clock Enable Request for ASC1 */ +#define SYS1_CLKENR_ASC1 (0x1 << 15) +/* (w) Clock Enable Request for ASC0 */ +#define SYS1_CLKENR_ASC0 (0x1 << 14) +/* (w) Clock Enable Request for SSC2 */ +#define SYS1_CLKENR_SSC2 (0x1 << 13) +/* (w) Clock Enable Request for SSC1 */ +#define SYS1_CLKENR_SSC1 (0x1 << 12) +/* (w) Clock Enable Request for SSC0 */ +#define SYS1_CLKENR_SSC0 (0x1 << 11) +/* (w) Clock Enable Request for GPTC */ +#define SYS1_CLKENR_GPTC (0x1 << 10) +/* (w) Clock Enable Request for DMA */ +#define SYS1_CLKENR_DMA (0x1 << 9) +/* (w) Clock Enable Request for FSCT */ +#define SYS1_CLKENR_FSCT (0x1 << 8) +/* (w) Clock Enable Request for ETHSW */ +#define SYS1_CLKENR_ETHSW (0x1 << 7) +/* (w) Clock Enable Request for EBU */ +#define SYS1_CLKENR_EBU (0x1 << 6) +/* (w) Clock Enable Request for TRNG */ +#define SYS1_CLKENR_TRNG (0x1 << 5) +/* (w) Clock Enable Request for DEU */ +#define SYS1_CLKENR_DEU (0x1 << 4) +/* (w) Clock Enable Request for PORT3 */ +#define SYS1_CLKENR_PORT3 (0x1 << 3) +/* (w) Clock Enable Request for PORT2 */ +#define SYS1_CLKENR_PORT2 (0x1 << 2) +/* (w) Clock Enable Request for PORT1 */ +#define SYS1_CLKENR_PORT1 (0x1 << 1) + +/******************************************************************************* + * SYS1 Clock Clear Register + ******************************************************************************/ +/* (w) Clock Disable Request for L2C */ +#define SYS1_CLKCLR_L2C (0x1 << 31) +/* (w) Clock Disable Request for DDR2 */ +#define SYS1_CLKCLR_DDR2 (0x1 << 30) +/* (w) Clock Disable Request for SMI2 */ +#define SYS1_CLKCLR_SMI2 (0x1 << 29) +/* (w) Clock Disable Request for SMI1 */ +#define SYS1_CLKCLR_SMI1 (0x1 << 28) +/* (w) Clock Disable Request for SMI0 */ +#define SYS1_CLKCLR_SMI0 (0x1 << 27) +/* (w) Clock Disable Request for FMI0 */ +#define SYS1_CLKCLR_FMI0 (0x1 << 26) +/* (w) Clock Disable Request for PORT0 */ +#define SYS1_CLKCLR_PORT0 (0x1 << 0) +/* (w) Clock Disable Request for PCM3 */ +#define SYS1_CLKCLR_PCM3 (0x1 << 19) +/* (w) Clock Disable Request for PCM2 */ +#define SYS1_CLKCLR_PCM2 (0x1 << 18) +/* (w) Clock Disable Request for PCM1 */ +#define SYS1_CLKCLR_PCM1 (0x1 << 17) +/* (w) Clock Disable Request for PCM0 */ +#define SYS1_CLKCLR_PCM0 (0x1 << 16) +/* (w) Clock Disable Request for ASC1 */ +#define SYS1_CLKCLR_ASC1 (0x1 << 15) +/* (w) Clock Disable Request for ASC0 */ +#define SYS1_CLKCLR_ASC0 (0x1 << 14) +/* (w) Clock Disable Request for SSC2 */ +#define SYS1_CLKCLR_SSC2 (0x1 << 13) +/* (w) Clock Disable Request for SSC1 */ +#define SYS1_CLKCLR_SSC1 (0x1 << 12) +/* (w) Clock Disable Request for SSC0 */ +#define SYS1_CLKCLR_SSC0 (0x1 << 11) +/* (w) Clock Disable Request for GPTC */ +#define SYS1_CLKCLR_GPTC (0x1 << 10) +/* (w) Clock Disable Request for DMA */ +#define SYS1_CLKCLR_DMA (0x1 << 9) +/* (w) Clock Disable Request for FSCT */ +#define SYS1_CLKCLR_FSCT (0x1 << 8) +/* (w) Clock Disable Request for ETHSW */ +#define SYS1_CLKCLR_ETHSW (0x1 << 7) +/* (w) Clock Disable Request for EBU */ +#define SYS1_CLKCLR_EBU (0x1 << 6) +/* (w) Clock Disable Request for TRNG */ +#define SYS1_CLKCLR_TRNG (0x1 << 5) +/* (w) Clock Disable Request for DEU */ +#define SYS1_CLKCLR_DEU (0x1 << 4) +/* (w) Clock Disable Request for PORT3 */ +#define SYS1_CLKCLR_PORT3 (0x1 << 3) +/* (w) Clock Disable Request for PORT2 */ +#define SYS1_CLKCLR_PORT2 (0x1 << 2) +/* (w) Clock Disable Request for PORT1 */ +#define SYS1_CLKCLR_PORT1 (0x1 << 1) + +/******************************************************************************* + * SYS1 FPI Control Register + ******************************************************************************/ + +/* FPI Bus Clock divider (0) */ +#define SYS1_FPICR_FPIDIV (0x1) +#define SYS1_FPICR_FPIDIV_VAL(val) (((val) & 0x1) << 0) +#define SYS1_FPICR_FPIDIV_GET(val) ((((val) & SYS1_FPICR_FPIDIV) >> 0) & 0x1) +#define SYS1_FPICR_FPIDIV_SET(reg,val) (reg) = ((reg & ~SYS1_FPICR_FPIDIV) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * SYS1 Clock Control Register for CPUn + ******************************************************************************/ + +/* Enable bit for clock of CPUn (1) */ +#define SYS1_CPUCR_CPUCLKEN (0x1 << 1) +#define SYS1_CPUCR_CPUCLKEN_VAL(val) (((val) & 0x1) << 1) +#define SYS1_CPUCR_CPUCLKEN_GET(val) ((((val) & SYS1_CPUCR_CPUCLKEN) >> 1) & 0x1) +#define SYS1_CPUCR_CPUCLKEN_SET(reg,val) (reg) = ((reg & ~SYS1_CPUCR_CPUCLKEN) | (((val) & 0x1) << 1)) +/* Divider factor for clock of CPUn (0) */ +#define SYS1_CPUCR_CPUDIV (0x1) +#define SYS1_CPUCR_CPUDIV_VAL(val) (((val) & 0x1) << 0) +#define SYS1_CPUCR_CPUDIV_GET(val) ((((val) & SYS1_CPUCR_CPUDIV) >> 0) & 0x1) +#define SYS1_CPUCR_CPUDIV_SET(reg,val) (reg) = ((reg & ~SYS1_CPUCR_CPUDIV) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * SYS1 Reset Request Register + ******************************************************************************/ + +/* HRSTOUT Reset Request (18) */ +#define SYS1_RREQ_HRSTOUT (0x1 << 18) +#define SYS1_RREQ_HRSTOUT_VAL(val) (((val) & 0x1) << 18) +#define SYS1_RREQ_HRSTOUT_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_HRSTOUT) | (((val) & 1) << 18)) + /* FBS0 Reset Request (17) */ +#define SYS1_RREQ_FBS0 (0x1 << 17) +#define SYS1_RREQ_FBS0_VAL(val) (((val) & 0x1) << 17) +#define SYS1_RREQ_FBS0_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_FBS0) | (((val) & 1) << 17)) + /* SUBSYS Reset Request (16) */ +#define SYS1_RREQ_SUBSYS (0x1 << 16) +#define SYS1_RREQ_SUBSYS_VAL(val) (((val) & 0x1) << 16) +#define SYS1_RREQ_SUBSYS_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_SUBSYS) | (((val) & 1) << 16)) + /* Watchdog5 Reset Request (13) */ +#define SYS1_RREQ_WDT5 (0x1 << 13) +#define SYS1_RREQ_WDT5_VAL(val) (((val) & 0x1) << 13) +#define SYS1_RREQ_WDT5_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT5) | (((val) & 1) << 13)) + /* Watchdog4 Reset Request (12) */ +#define SYS1_RREQ_WDT4 (0x1 << 12) +#define SYS1_RREQ_WDT4_VAL(val) (((val) & 0x1) << 12) +#define SYS1_RREQ_WDT4_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT4) | (((val) & 1) << 12)) + /* Watchdog3 Reset Request (11) */ +#define SYS1_RREQ_WDT3 (0x1 << 11) +#define SYS1_RREQ_WDT3_VAL(val) (((val) & 0x1) << 11) +#define SYS1_RREQ_WDT3_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT3) | (((val) & 1) << 11)) + /* Watchdog2 Reset Request (10) */ +#define SYS1_RREQ_WDT2 (0x1 << 10) +#define SYS1_RREQ_WDT2_VAL(val) (((val) & 0x1) << 10) +#define SYS1_RREQ_WDT2_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT2) | (((val) & 1) << 10)) + /* Watchdog1 Reset Request (9) */ +#define SYS1_RREQ_WDT1 (0x1 << 9) +#define SYS1_RREQ_WDT1_VAL(val) (((val) & 0x1) << 9) +#define SYS1_RREQ_WDT1_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT1) | (((val) & 1) << 9)) + /* Watchdog0 Reset Request (8) */ +#define SYS1_RREQ_WDT0 (0x1 << 8) +#define SYS1_RREQ_WDT0_VAL(val) (((val) & 0x1) << 8) +#define SYS1_RREQ_WDT0_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT0) | (((val) & 1) << 8)) + /* CPU5 Reset Request (5) */ +#define SYS1_RREQ_CPU5 (0x1 << 5) +#define SYS1_RREQ_CPU5_VAL(val) (((val) & 0x1) << 5) +#define SYS1_RREQ_CPU5_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU5) | (((val) & 1) << 5)) + /* CPU4 Reset Request (4) */ +#define SYS1_RREQ_CPU4 (0x1 << 4) +#define SYS1_RREQ_CPU4_VAL(val) (((val) & 0x1) << 4) +#define SYS1_RREQ_CPU4_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU4) | (((val) & 1) << 4)) + /* CPU3 Reset Request (3) */ +#define SYS1_RREQ_CPU3 (0x1 << 3) +#define SYS1_RREQ_CPU3_VAL(val) (((val) & 0x1) << 3) +#define SYS1_RREQ_CPU3_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU3) | (((val) & 1) << 3)) + /* CPU2 Reset Request (2) */ +#define SYS1_RREQ_CPU2 (0x1 << 2) +#define SYS1_RREQ_CPU2_VAL(val) (((val) & 0x1) << 2) +#define SYS1_RREQ_CPU2_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU2) | (((val) & 1) << 2)) + /* CPU1 Reset Request (1) */ +#define SYS1_RREQ_CPU1 (0x1 << 1) +#define SYS1_RREQ_CPU1_VAL(val) (((val) & 0x1) << 1) +#define SYS1_RREQ_CPU1_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU1) | (((val) & 1) << 1)) +/* CPU0 Reset Request (0) */ +#define SYS1_RREQ_CPU0 (0x1) +#define SYS1_RREQ_CPU0_VAL(val) (((val) & 0x1) << 0) +#define SYS1_RREQ_CPU0_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU0) | (((val) & 1) << 0)) + +/******************************************************************************* + * SYS1 Reset Release Register + ******************************************************************************/ + +/* HRSTOUT Reset Release (18) */ +#define SYS1_RRLSR_HRSTOUT (0x1 << 18) +#define SYS1_RRLSR_HRSTOUT_VAL(val) (((val) & 0x1) << 18) +#define SYS1_RRLSR_HRSTOUT_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_HRSTOUT) | (((val) & 1) << 18)) +/* FBS0 Reset Release (17) */ +#define SYS1_RRLSR_FBS0 (0x1 << 17) +#define SYS1_RRLSR_FBS0_VAL(val) (((val) & 0x1) << 17) +#define SYS1_RRLSR_FBS0_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_FBS0) | (((val) & 1) << 17)) +/* SUBSYS Reset Release (16) */ +#define SYS1_RRLSR_SUBSYS (0x1 << 16) +#define SYS1_RRLSR_SUBSYS_VAL(val) (((val) & 0x1) << 16) +#define SYS1_RRLSR_SUBSYS_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_SUBSYS) | (((val) & 1) << 16)) +/* Watchdog5 Reset Release (13) */ +#define SYS1_RRLSR_WDT5 (0x1 << 13) +#define SYS1_RRLSR_WDT5_VAL(val) (((val) & 0x1) << 13) +#define SYS1_RRLSR_WDT5_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT5) | (((val) & 1) << 13)) +/* Watchdog4 Reset Release (12) */ +#define SYS1_RRLSR_WDT4 (0x1 << 12) +#define SYS1_RRLSR_WDT4_VAL(val) (((val) & 0x1) << 12) +#define SYS1_RRLSR_WDT4_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT4) | (((val) & 1) << 12)) +/* Watchdog3 Reset Release (11) */ +#define SYS1_RRLSR_WDT3 (0x1 << 11) +#define SYS1_RRLSR_WDT3_VAL(val) (((val) & 0x1) << 11) +#define SYS1_RRLSR_WDT3_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT3) | (((val) & 1) << 11)) +/* Watchdog2 Reset Release (10) */ +#define SYS1_RRLSR_WDT2 (0x1 << 10) +#define SYS1_RRLSR_WDT2_VAL(val) (((val) & 0x1) << 10) +#define SYS1_RRLSR_WDT2_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT2) | (((val) & 1) << 10)) +/* Watchdog1 Reset Release (9) */ +#define SYS1_RRLSR_WDT1 (0x1 << 9) +#define SYS1_RRLSR_WDT1_VAL(val) (((val) & 0x1) << 9) +#define SYS1_RRLSR_WDT1_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT1) | (((val) & 1) << 9)) +/* Watchdog0 Reset Release (8) */ +#define SYS1_RRLSR_WDT0 (0x1 << 8) +#define SYS1_RRLSR_WDT0_VAL(val) (((val) & 0x1) << 8) +#define SYS1_RRLSR_WDT0_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT0) | (((val) & 1) << 8)) +/* CPU5 Reset Release (5) */ +#define SYS1_RRLSR_CPU5 (0x1 << 5) +#define SYS1_RRLSR_CPU5_VAL(val) (((val) & 0x1) << 5) +#define SYS1_RRLSR_CPU5_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU5) | (((val) & 1) << 5)) +/* CPU4 Reset Release (4) */ +#define SYS1_RRLSR_CPU4 (0x1 << 4) +#define SYS1_RRLSR_CPU4_VAL(val) (((val) & 0x1) << 4) +#define SYS1_RRLSR_CPU4_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU4) | (((val) & 1) << 4)) +/* CPU3 Reset Release (3) */ +#define SYS1_RRLSR_CPU3 (0x1 << 3) +#define SYS1_RRLSR_CPU3_VAL(val) (((val) & 0x1) << 3) +#define SYS1_RRLSR_CPU3_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU3) | (((val) & 1) << 3)) +/* CPU2 Reset Release (2) */ +#define SYS1_RRLSR_CPU2 (0x1 << 2) +#define SYS1_RRLSR_CPU2_VAL(val) (((val) & 0x1) << 2) +#define SYS1_RRLSR_CPU2_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU2) | (((val) & 1) << 2)) +/* CPU1 Reset Release (1) */ +#define SYS1_RRLSR_CPU1 (0x1 << 1) +#define SYS1_RRLSR_CPU1_VAL(val) (((val) & 0x1) << 1) +#define SYS1_RRLSR_CPU1_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU1) | (((val) & 1) << 1)) +/* CPU0 Reset Release (0) */ +#define SYS1_RRLSR_CPU0 (0x1) +#define SYS1_RRLSR_CPU0_VAL(val) (((val) & 0x1) << 0) +#define SYS1_RRLSR_CPU0_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU0) | (((val) & 1) << 0)) + +#endif diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h new file mode 100644 index 000000000..ff9f04b4d --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h @@ -0,0 +1,494 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __SYS2_REG_H +#define __SYS2_REG_H + +#define sys2_r32(reg) ltq_r32(&sys2->reg) +#define sys2_w32(val, reg) ltq_w32(val, &sys2->reg) +#define sys2_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &sys2->reg) + +/** SYS2 register structure */ +struct svip_reg_sys2 { + volatile unsigned long clksr; /* 0x0000 */ + volatile unsigned long clkenr; /* 0x0004 */ + volatile unsigned long clkclr; /* 0x0008 */ + volatile unsigned long reserved0[1]; + volatile unsigned long rsr; /* 0x0010 */ + volatile unsigned long rreqr; /* 0x0014 */ + volatile unsigned long rrlsr; /* 0x0018 */ +}; + +/******************************************************************************* + * SYS2 Clock Status Register + ******************************************************************************/ + +/* Clock Enable for PORT4 */ +#define SYS2_CLKSR_PORT4 (0x1 << 27) +#define SYS2_CLKSR_PORT4_VAL(val) (((val) & 0x1) << 27) +#define SYS2_CLKSR_PORT4_GET(val) (((val) & SYS2_CLKSR_PORT4) >> 27) +/* Clock Enable for HWSYNC */ +#define SYS2_CLKSR_HWSYNC (0x1 << 26) +#define SYS2_CLKSR_HWSYNC_VAL(val) (((val) & +#define SYS2_CLKSR_HWSYNC_GET(val) (((val) & SYS2_CLKSR_HWSYNC) >> 26) + /* Clock Enable for MBS */ +#define SYS2_CLKSR_MBS (0x1 << 25) +#define SYS2_CLKSR_MBS_VAL(val) (((val) & 0x1) << 25) +#define SYS2_CLKSR_MBS_GET(val) (((val) & SYS2_CLKSR_MBS) >> 25) + /* Clock Enable for SWINT */ +#define SYS2_CLKSR_SWINT (0x1 << 24) +#define SYS2_CLKSR_SWINT_VAL(val) (((val) & 0x1) << 24) +#define SYS2_CLKSR_SWINT_GET(val) (((val) & SYS2_CLKSR_SWINT) >> 24) + /* Clock Enable for HWACC3 */ +#define SYS2_CLKSR_HWACC3 (0x1 << 19) +#define SYS2_CLKSR_HWACC3_VAL(val) (((val) & +#define SYS2_CLKSR_HWACC3_GET(val) (((val) & SYS2_CLKSR_HWACC3) >> 19) + /* Clock Enable for HWACC2 */ +#define SYS2_CLKSR_HWACC2 (0x1 << 18) +#define SYS2_CLKSR_HWACC2_VAL(val) (((val) & +#define SYS2_CLKSR_HWACC2_GET(val) (((val) & SYS2_CLKSR_HWACC2) >> 18) + /* Clock Enable for HWACC1 */ +#define SYS2_CLKSR_HWACC1 (0x1 << 17) +#define SYS2_CLKSR_HWACC1_VAL(val) (((val) & +#define SYS2_CLKSR_HWACC1_GET(val) (((val) & SYS2_CLKSR_HWACC1) >> 17) + /* Clock Enable for HWACC0 */ +#define SYS2_CLKSR_HWACC0 (0x1 << 16) +#define SYS2_CLKSR_HWACC0_VAL(val) (((val) & +#define SYS2_CLKSR_HWACC0_GET(val) (((val) & SYS2_CLKSR_HWACC0) >> 16) + /* Clock Enable for SIF7 */ +#define SYS2_CLKSR_SIF7 (0x1 << 15) +#define SYS2_CLKSR_SIF7_VAL(val) (((val) & 0x1) << 15) +#define SYS2_CLKSR_SIF7_GET(val) (((val) & SYS2_CLKSR_SIF7) >> 15) + /* Clock Enable for SIF6 */ +#define SYS2_CLKSR_SIF6 (0x1 << 14) +#define SYS2_CLKSR_SIF6_VAL(val) (((val) & 0x1) << 14) +#define SYS2_CLKSR_SIF6_GET(val) (((val) & SYS2_CLKSR_SIF6) >> 14) + /* Clock Enable for SIF5 */ +#define SYS2_CLKSR_SIF5 (0x1 << 13) +#define SYS2_CLKSR_SIF5_VAL(val) (((val) & 0x1) << 13) +#define SYS2_CLKSR_SIF5_GET(val) (((val) & SYS2_CLKSR_SIF5) >> 13) + /* Clock Enable for SIF4 */ +#define SYS2_CLKSR_SIF4 (0x1 << 12) +#define SYS2_CLKSR_SIF4_VAL(val) (((val) & 0x1) << 12) +#define SYS2_CLKSR_SIF4_GET(val) (((val) & SYS2_CLKSR_SIF4) >> 12) + /* Clock Enable for SIF3 */ +#define SYS2_CLKSR_SIF3 (0x1 << 11) +#define SYS2_CLKSR_SIF3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_CLKSR_SIF3_GET(val) (((val) & SYS2_CLKSR_SIF3) >> 11) +/* Clock Enable for SIF2 */ +#define SYS2_CLKSR_SIF2 (0x1 << 10) +#define SYS2_CLKSR_SIF2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_CLKSR_SIF2_GET(val) (((val) & SYS2_CLKSR_SIF2) >> 10) +/* Clock Enable for SIF1 */ +#define SYS2_CLKSR_SIF1 (0x1 << 9) +#define SYS2_CLKSR_SIF1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_CLKSR_SIF1_GET(val) (((val) & SYS2_CLKSR_SIF1) >> 9) +/* Clock Enable for SIF0 */ +#define SYS2_CLKSR_SIF0 (0x1 << 8) +#define SYS2_CLKSR_SIF0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_CLKSR_SIF0_GET(val) (((val) & SYS2_CLKSR_SIF0) >> 8) +/* Clock Enable for DFEV7 */ +#define SYS2_CLKSR_DFEV7 (0x1 << 7) +#define SYS2_CLKSR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_CLKSR_DFEV7_GET(val) (((val) & SYS2_CLKSR_DFEV7) >> 7) +/* Clock Enable for DFEV6 */ +#define SYS2_CLKSR_DFEV6 (0x1 << 6) +#define SYS2_CLKSR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_CLKSR_DFEV6_GET(val) (((val) & SYS2_CLKSR_DFEV6) >> 6) +/* Clock Enable for DFEV5 */ +#define SYS2_CLKSR_DFEV5 (0x1 << 5) +#define SYS2_CLKSR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_CLKSR_DFEV5_GET(val) (((val) & SYS2_CLKSR_DFEV5) >> 5) +/* Clock Enable for DFEV4 */ +#define SYS2_CLKSR_DFEV4 (0x1 << 4) +#define SYS2_CLKSR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_CLKSR_DFEV4_GET(val) (((val) & SYS2_CLKSR_DFEV4) >> 4) +/* Clock Enable for DFEV3 */ +#define SYS2_CLKSR_DFEV3 (0x1 << 3) +#define SYS2_CLKSR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_CLKSR_DFEV3_GET(val) (((val) & SYS2_CLKSR_DFEV3) >> 3) +/* Clock Enable for DFEV2 */ +#define SYS2_CLKSR_DFEV2 (0x1 << 2) +#define SYS2_CLKSR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_CLKSR_DFEV2_GET(val) (((val) & SYS2_CLKSR_DFEV2) >> 2) +/* Clock Enable for DFEV1 */ +#define SYS2_CLKSR_DFEV1 (0x1 << 1) +#define SYS2_CLKSR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_CLKSR_DFEV1_GET(val) (((val) & SYS2_CLKSR_DFEV1) >> 1) +/* Clock Enable for DFEV0 */ +#define SYS2_CLKSR_DFEV0 (0x1) +#define SYS2_CLKSR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_CLKSR_DFEV0_GET(val) ((val) & SYS2_CLKSR_DFEV0) + +/******************************************************************************* + * SYS2 Clock Enable Register + ******************************************************************************/ + +/* Clock Enable Request for PORT4 */ +#define SYS2_CLKENR_PORT4 (0x1 << 27) +#define SYS2_CLKENR_PORT4_VAL(val) (((val) & 0x1) << 27) +#define SYS2_CLKENR_PORT4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_PORT4) | ((val & 0x1) << 27)) +/* Clock Enable Request for HWSYNC */ +#define SYS2_CLKENR_HWSYNC (0x1 << 26) +#define SYS2_CLKENR_HWSYNC_VAL(val) (((val) & 0x1) << 26) +#define SYS2_CLKENR_HWSYNC_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWSYNC) | ((val & 0x1) << 26)) +/* Clock Enable Request for MBS */ +#define SYS2_CLKENR_MBS (0x1 << 25) +#define SYS2_CLKENR_MBS_VAL(val) (((val) & 0x1) << 25) +#define SYS2_CLKENR_MBS_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_MBS) | ((val & 0x1) << 25)) +/* Clock Enable Request for SWINT */ +#define SYS2_CLKENR_SWINT (0x1 << 24) +#define SYS2_CLKENR_SWINT_VAL(val) (((val) & 0x1) << 24) +#define SYS2_CLKENR_SWINT_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SWINT) | ((val & 0x1) << 24)) +/* Clock Enable Request for HWACC3 */ +#define SYS2_CLKENR_HWACC3 (0x1 << 19) +#define SYS2_CLKENR_HWACC3_VAL(val) (((val) & 0x1) << 19) +#define SYS2_CLKENR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC3) | ((val & 0x1) << 19)) +/* Clock Enable Request for HWACC2 */ +#define SYS2_CLKENR_HWACC2 (0x1 << 18) +#define SYS2_CLKENR_HWACC2_VAL(val) (((val) & 0x1) << 18) +#define SYS2_CLKENR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC2) | ((val & 0x1) << 18)) +/* Clock Enable Request for HWACC1 */ +#define SYS2_CLKENR_HWACC1 (0x1 << 17) +#define SYS2_CLKENR_HWACC1_VAL(val) (((val) & 0x1) << 17) +#define SYS2_CLKENR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC1) | ((val & 0x1) << 17)) +/* Clock Enable Request for HWACC0 */ +#define SYS2_CLKENR_HWACC0 (0x1 << 16) +#define SYS2_CLKENR_HWACC0_VAL(val) (((val) & 0x1) << 16) +#define SYS2_CLKENR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC0) | ((val & 0x1) << 16)) +/* Clock Enable Request for SIF7 */ +#define SYS2_CLKENR_SIF7 (0x1 << 15) +#define SYS2_CLKENR_SIF7_VAL(val) (((val) & 0x1) << 15) +#define SYS2_CLKENR_SIF7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF7) | ((val & 0x1) << 15)) +/* Clock Enable Request for SIF6 */ +#define SYS2_CLKENR_SIF6 (0x1 << 14) +#define SYS2_CLKENR_SIF6_VAL(val) (((val) & 0x1) << 14) +#define SYS2_CLKENR_SIF6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF6) | ((val & 0x1) << 14)) +/* Clock Enable Request for SIF5 */ +#define SYS2_CLKENR_SIF5 (0x1 << 13) +#define SYS2_CLKENR_SIF5_VAL(val) (((val) & 0x1) << 13) +#define SYS2_CLKENR_SIF5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF5) | ((val & 0x1) << 13)) +/* Clock Enable Request for SIF4 */ +#define SYS2_CLKENR_SIF4 (0x1 << 12) +#define SYS2_CLKENR_SIF4_VAL(val) (((val) & 0x1) << 12) +#define SYS2_CLKENR_SIF4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF4) | ((val & 0x1) << 12)) +/* Clock Enable Request for SIF3 */ +#define SYS2_CLKENR_SIF3 (0x1 << 11) +#define SYS2_CLKENR_SIF3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_CLKENR_SIF3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF3) | ((val & 0x1) << 11)) +/* Clock Enable Request for SIF2 */ +#define SYS2_CLKENR_SIF2 (0x1 << 10) +#define SYS2_CLKENR_SIF2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_CLKENR_SIF2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF2) | ((val & 0x1) << 10)) +/* Clock Enable Request for SIF1 */ +#define SYS2_CLKENR_SIF1 (0x1 << 9) +#define SYS2_CLKENR_SIF1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_CLKENR_SIF1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF1) | ((val & 0x1) << 9)) +/* Clock Enable Request for SIF0 */ +#define SYS2_CLKENR_SIF0 (0x1 << 8) +#define SYS2_CLKENR_SIF0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_CLKENR_SIF0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF0) | ((val & 0x1) << 8)) +/* Clock Enable Request for DFEV7 */ +#define SYS2_CLKENR_DFEV7 (0x1 << 7) +#define SYS2_CLKENR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_CLKENR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV7) | ((val & 0x1) << 7)) +/* Clock Enable Request for DFEV6 */ +#define SYS2_CLKENR_DFEV6 (0x1 << 6) +#define SYS2_CLKENR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_CLKENR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV6) | ((val & 0x1) << 6)) +/* Clock Enable Request for DFEV5 */ +#define SYS2_CLKENR_DFEV5 (0x1 << 5) +#define SYS2_CLKENR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_CLKENR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV5) | ((val & 0x1) << 5)) +/* Clock Enable Request for DFEV4 */ +#define SYS2_CLKENR_DFEV4 (0x1 << 4) +#define SYS2_CLKENR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_CLKENR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV4) | ((val & 0x1) << 4)) +/* Clock Enable Request for DFEV3 */ +#define SYS2_CLKENR_DFEV3 (0x1 << 3) +#define SYS2_CLKENR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_CLKENR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV3) | ((val & 0x1) << 3)) +/* Clock Enable Request for DFEV2 */ +#define SYS2_CLKENR_DFEV2 (0x1 << 2) +#define SYS2_CLKENR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_CLKENR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV2) | ((val & 0x1) << 2)) +/* Clock Enable Request for DFEV1 */ +#define SYS2_CLKENR_DFEV1 (0x1 << 1) +#define SYS2_CLKENR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_CLKENR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV1) | ((val & 0x1) << 1)) +/* Clock Enable Request for DFEV0 */ +#define SYS2_CLKENR_DFEV0 (0x1) +#define SYS2_CLKENR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_CLKENR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV0) | ((val & 0x1))) + +/******************************************************************************* + * SYS2 Clock Clear Register + ******************************************************************************/ + +/* Clock Disable Request for PORT4 */ +#define SYS2_CLKCLR_PORT4 (0x1 << 27) +#define SYS2_CLKCLR_PORT4_VAL(val) (((val) & 0x1) << 27) +#define SYS2_CLKCLR_PORT4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_PORT4) | ((val & 0x1) << 27)) +/* Clock Disable Request for HWSYNC */ +#define SYS2_CLKCLR_HWSYNC (0x1 << 26) +#define SYS2_CLKCLR_HWSYNC_VAL(val) (((val) & 0x1) << 26) +#define SYS2_CLKCLR_HWSYNC_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWSYNC) | ((val & 0x1) << 26)) +/* Clock Disable Request for MBS */ +#define SYS2_CLKCLR_MBS (0x1 << 25) +#define SYS2_CLKCLR_MBS_VAL(val) (((val) & 0x1) << 25) +#define SYS2_CLKCLR_MBS_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_MBS) | ((val & 0x1) << 25)) +/* Clock Disable Request for SWINT */ +#define SYS2_CLKCLR_SWINT (0x1 << 24) +#define SYS2_CLKCLR_SWINT_VAL(val) (((val) & 0x1) << 24) +#define SYS2_CLKCLR_SWINT_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SWINT) | ((val & 0x1) << 24)) +/* Clock Disable Request for HWACC3 */ +#define SYS2_CLKCLR_HWACC3 (0x1 << 19) +#define SYS2_CLKCLR_HWACC3_VAL(val) (((val) & 0x1) << 19) +#define SYS2_CLKCLR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC3) | ((val & 0x1) << 19)) +/* Clock Disable Request for HWACC2 */ +#define SYS2_CLKCLR_HWACC2 (0x1 << 18) +#define SYS2_CLKCLR_HWACC2_VAL(val) (((val) & 0x1) << 18) +#define SYS2_CLKCLR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC2) | ((val & 0x1) << 18)) +/* Clock Disable Request for HWACC1 */ +#define SYS2_CLKCLR_HWACC1 (0x1 << 17) +#define SYS2_CLKCLR_HWACC1_VAL(val) (((val) & 0x1) << 17) +#define SYS2_CLKCLR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC1) | ((val & 0x1) << 17)) +/* Clock Disable Request for HWACC0 */ +#define SYS2_CLKCLR_HWACC0 (0x1 << 16) +#define SYS2_CLKCLR_HWACC0_VAL(val) (((val) & 0x1) << 16) +#define SYS2_CLKCLR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC0) | ((val & 0x1) << 16)) +/* Clock Disable Request for SIF7 */ +#define SYS2_CLKCLR_SIF7 (0x1 << 15) +#define SYS2_CLKCLR_SIF7_VAL(val) (((val) & 0x1) << 15) +#define SYS2_CLKCLR_SIF7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF7) | ((val & 0x1) << 15)) +/* Clock Disable Request for SIF6 */ +#define SYS2_CLKCLR_SIF6 (0x1 << 14) +#define SYS2_CLKCLR_SIF6_VAL(val) (((val) & 0x1) << 14) +#define SYS2_CLKCLR_SIF6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF6) | ((val & 0x1) << 14)) +/* Clock Disable Request for SIF5 */ +#define SYS2_CLKCLR_SIF5 (0x1 << 13) +#define SYS2_CLKCLR_SIF5_VAL(val) (((val) & 0x1) << 13) +#define SYS2_CLKCLR_SIF5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF5) | ((val & 0x1) << 13)) +/* Clock Disable Request for SIF4 */ +#define SYS2_CLKCLR_SIF4 (0x1 << 12) +#define SYS2_CLKCLR_SIF4_VAL(val) (((val) & 0x1) << 12) +#define SYS2_CLKCLR_SIF4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF4) | ((val & 0x1) << 12)) +/* Clock Disable Request for SIF3 */ +#define SYS2_CLKCLR_SIF3 (0x1 << 11) +#define SYS2_CLKCLR_SIF3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_CLKCLR_SIF3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF3) | ((val & 0x1) << 11)) +/* Clock Disable Request for SIF2 */ +#define SYS2_CLKCLR_SIF2 (0x1 << 10) +#define SYS2_CLKCLR_SIF2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_CLKCLR_SIF2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF2) | ((val & 0x1) << 10)) +/* Clock Disable Request for SIF1 */ +#define SYS2_CLKCLR_SIF1 (0x1 << 9) +#define SYS2_CLKCLR_SIF1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_CLKCLR_SIF1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF1) | ((val & 0x1) << 9)) +/* Clock Disable Request for SIF0 */ +#define SYS2_CLKCLR_SIF0 (0x1 << 8) +#define SYS2_CLKCLR_SIF0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_CLKCLR_SIF0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF0) | ((val & 0x1) << 8)) +/* Clock Disable Request for DFEV7 */ +#define SYS2_CLKCLR_DFEV7 (0x1 << 7) +#define SYS2_CLKCLR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_CLKCLR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV7) | ((val & 0x1) << 7)) +/* Clock Disable Request for DFEV6 */ +#define SYS2_CLKCLR_DFEV6 (0x1 << 6) +#define SYS2_CLKCLR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_CLKCLR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV6) | ((val & 0x1) << 6)) +/* Clock Disable Request for DFEV5 */ +#define SYS2_CLKCLR_DFEV5 (0x1 << 5) +#define SYS2_CLKCLR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_CLKCLR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV5) | ((val & 0x1) << 5)) +/* Clock Disable Request for DFEV4 */ +#define SYS2_CLKCLR_DFEV4 (0x1 << 4) +#define SYS2_CLKCLR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_CLKCLR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV4) | ((val & 0x1) << 4)) +/* Clock Disable Request for DFEV3 */ +#define SYS2_CLKCLR_DFEV3 (0x1 << 3) +#define SYS2_CLKCLR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_CLKCLR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV3) | ((val & 0x1) << 3)) +/* Clock Disable Request for DFEV2 */ +#define SYS2_CLKCLR_DFEV2 (0x1 << 2) +#define SYS2_CLKCLR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_CLKCLR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV2) | ((val & 0x1) << 2)) +/* Clock Disable Request for DFEV1 */ +#define SYS2_CLKCLR_DFEV1 (0x1 << 1) +#define SYS2_CLKCLR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_CLKCLR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV1) | ((val & 0x1) << 1)) +/* Clock Disable Request for DFEV0 */ +#define SYS2_CLKCLR_DFEV0 (0x1) +#define SYS2_CLKCLR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_CLKCLR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV0) | ((val & 0x1))) + +/******************************************************************************* + * SYS2 Reset Status Register + ******************************************************************************/ + +/* HWACC3 Reset */ +#define SYS2_RSR_HWACC3 (0x1 << 11) +#define SYS2_RSR_HWACC3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_RSR_HWACC3_GET(val) (((val) & SYS2_RSR_HWACC3) >> 11) +/* HWACC2 Reset */ +#define SYS2_RSR_HWACC2 (0x1 << 10) +#define SYS2_RSR_HWACC2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_RSR_HWACC2_GET(val) (((val) & SYS2_RSR_HWACC2) >> 10) +/* HWACC1 Reset */ +#define SYS2_RSR_HWACC1 (0x1 << 9) +#define SYS2_RSR_HWACC1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_RSR_HWACC1_GET(val) (((val) & SYS2_RSR_HWACC1) >> 9) +/* HWACC0 Reset */ +#define SYS2_RSR_HWACC0 (0x1 << 8) +#define SYS2_RSR_HWACC0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_RSR_HWACC0_GET(val) (((val) & SYS2_RSR_HWACC0) >> 8) +/* DFEV7 Reset */ +#define SYS2_RSR_DFEV7 (0x1 << 7) +#define SYS2_RSR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_RSR_DFEV7_GET(val) (((val) & SYS2_RSR_DFEV7) >> 7) +/* DFEV6 Reset */ +#define SYS2_RSR_DFEV6 (0x1 << 6) +#define SYS2_RSR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_RSR_DFEV6_GET(val) (((val) & SYS2_RSR_DFEV6) >> 6) +/* DFEV5 Reset */ +#define SYS2_RSR_DFEV5 (0x1 << 5) +#define SYS2_RSR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_RSR_DFEV5_GET(val) (((val) & SYS2_RSR_DFEV5) >> 5) +/* DFEV4 Reset */ +#define SYS2_RSR_DFEV4 (0x1 << 4) +#define SYS2_RSR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_RSR_DFEV4_GET(val) (((val) & SYS2_RSR_DFEV4) >> 4) +/* DFEV3 Reset */ +#define SYS2_RSR_DFEV3 (0x1 << 3) +#define SYS2_RSR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_RSR_DFEV3_GET(val) (((val) & SYS2_RSR_DFEV3) >> 3) +/* DFEV2 Reset */ +#define SYS2_RSR_DFEV2 (0x1 << 2) +#define SYS2_RSR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_RSR_DFEV2_GET(val) (((val) & SYS2_RSR_DFEV2) >> 2) +/* DFEV1 Reset */ +#define SYS2_RSR_DFEV1 (0x1 << 1) +#define SYS2_RSR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_RSR_DFEV1_GET(val) (((val) & SYS2_RSR_DFEV1) >> 1) +/* DFEV0 Reset */ +#define SYS2_RSR_DFEV0 (0x1) +#define SYS2_RSR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_RSR_DFEV0_GET(val) ((val) & SYS2_RSR_DFEV0) + +/****************************************************************************** + * SYS2 Reset Request Register + ******************************************************************************/ + +/* HWACC3 Reset Request */ +#define SYS2_RREQR_HWACC3 (0x1 << 11) +#define SYS2_RREQR_HWACC3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_RREQR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC3) | ((val & 0x1) << 11)) +/* HWACC2 Reset Request */ +#define SYS2_RREQR_HWACC2 (0x1 << 10) +#define SYS2_RREQR_HWACC2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_RREQR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC2) | ((val & 0x1) << 10)) +/* HWACC1 Reset Request */ +#define SYS2_RREQR_HWACC1 (0x1 << 9) +#define SYS2_RREQR_HWACC1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_RREQR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC1) | ((val & 0x1) << 9)) +/* HWACC0 Reset Request */ +#define SYS2_RREQR_HWACC0 (0x1 << 8) +#define SYS2_RREQR_HWACC0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_RREQR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC0) | ((val & 0x1) << 8)) +/* DFEV7 Reset Request */ +#define SYS2_RREQR_DFEV7 (0x1 << 7) +#define SYS2_RREQR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_RREQR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV7) | ((val & 0x1) << 7)) +/* DFEV6 Reset Request */ +#define SYS2_RREQR_DFEV6 (0x1 << 6) +#define SYS2_RREQR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_RREQR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV6) | ((val & 0x1) << 6)) +/* DFEV5 Reset Request */ +#define SYS2_RREQR_DFEV5 (0x1 << 5) +#define SYS2_RREQR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_RREQR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV5) | ((val & 0x1) << 5)) +/* DFEV4 Reset Request */ +#define SYS2_RREQR_DFEV4 (0x1 << 4) +#define SYS2_RREQR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_RREQR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV4) | ((val & 0x1) << 4)) +/* DFEV3 Reset Request */ +#define SYS2_RREQR_DFEV3 (0x1 << 3) +#define SYS2_RREQR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_RREQR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV3) | ((val & 0x1) << 3)) +/* DFEV2 Reset Request */ +#define SYS2_RREQR_DFEV2 (0x1 << 2) +#define SYS2_RREQR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_RREQR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV2) | ((val & 0x1) << 2)) +/* DFEV1 Reset Request */ +#define SYS2_RREQR_DFEV1 (0x1 << 1) +#define SYS2_RREQR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_RREQR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV1) | ((val & 0x1) << 1)) +/* DFEV0 Reset Request */ +#define SYS2_RREQR_DFEV0 (0x1) +#define SYS2_RREQR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_RREQR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV0) | ((val & 0x1))) + +/******************************************************************************* + * SYS2 Reset Release Register + ******************************************************************************/ + +/* HWACC3 Reset Release */ +#define SYS2_RRLSR_HWACC3 (0x1 << 11) +#define SYS2_RRLSR_HWACC3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_RRLSR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC3) | ((val & 0x1) << 11)) +/* HWACC2 Reset Release */ +#define SYS2_RRLSR_HWACC2 (0x1 << 10) +#define SYS2_RRLSR_HWACC2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_RRLSR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC2) | ((val & 0x1) << 10)) +/* HWACC1 Reset Release */ +#define SYS2_RRLSR_HWACC1 (0x1 << 9) +#define SYS2_RRLSR_HWACC1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_RRLSR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC1) | ((val & 0x1) << 9)) +/* HWACC0 Reset Release */ +#define SYS2_RRLSR_HWACC0 (0x1 << 8) +#define SYS2_RRLSR_HWACC0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_RRLSR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC0) | ((val & 0x1) << 8)) +/* DFEV7 Reset Release */ +#define SYS2_RRLSR_DFEV7 (0x1 << 7) +#define SYS2_RRLSR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_RRLSR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV7) | ((val & 0x1) << 7)) +/* DFEV6 Reset Release */ +#define SYS2_RRLSR_DFEV6 (0x1 << 6) +#define SYS2_RRLSR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_RRLSR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV6) | ((val & 0x1) << 6)) +/* DFEV5 Reset Release */ +#define SYS2_RRLSR_DFEV5 (0x1 << 5) +#define SYS2_RRLSR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_RRLSR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV5) | ((val & 0x1) << 5)) +/* DFEV4 Reset Release */ +#define SYS2_RRLSR_DFEV4 (0x1 << 4) +#define SYS2_RRLSR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_RRLSR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV4) | ((val & 0x1) << 4)) +/* DFEV3 Reset Release */ +#define SYS2_RRLSR_DFEV3 (0x1 << 3) +#define SYS2_RRLSR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_RRLSR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV3) | ((val & 0x1) << 3)) +/* DFEV2 Reset Release */ +#define SYS2_RRLSR_DFEV2 (0x1 << 2) +#define SYS2_RRLSR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_RRLSR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV2) | ((val & 0x1) << 2)) +/* DFEV1 Reset Release */ +#define SYS2_RRLSR_DFEV1 (0x1 << 1) +#define SYS2_RRLSR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_RRLSR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV1) | ((val & 0x1) << 1)) +/* DFEV0 Reset Release */ +#define SYS2_RRLSR_DFEV0 (0x1) +#define SYS2_RRLSR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_RRLSR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV0) | ((val & 0x1))) + +#endif /* __SYS2_H */ + diff --git a/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-buttons.c b/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-buttons.c new file mode 100644 index 000000000..ad25cac79 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-buttons.c @@ -0,0 +1,58 @@ +/* + * Lantiq GPIO button support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <dev-gpio-buttons.h> + +void __init ltq_register_gpio_keys_polled(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons) +{ + struct platform_device *pdev; + struct gpio_keys_platform_data pdata; + struct gpio_keys_button *p; + int err; + + p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, buttons, nbuttons * sizeof(*p)); + + pdev = platform_device_alloc("gpio-keys-polled", id); + if (!pdev) + goto err_free_buttons; + + memset(&pdata, 0, sizeof(pdata)); + pdata.poll_interval = poll_interval; + pdata.nbuttons = nbuttons; + pdata.buttons = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_buttons: + kfree(p); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-leds.c b/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-leds.c new file mode 100644 index 000000000..89dc79de6 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-leds.c @@ -0,0 +1,57 @@ +/* + * Lantiq GPIO LED device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <dev-gpio-leds.h> + +void __init ltq_add_device_gpio_leds(int id, unsigned num_leds, + struct gpio_led *leds) +{ + struct platform_device *pdev; + struct gpio_led_platform_data pdata; + struct gpio_led *p; + int err; + + p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, leds, num_leds * sizeof(*p)); + + pdev = platform_device_alloc("leds-gpio", id); + if (!pdev) + goto err_free_leds; + + memset(&pdata, 0, sizeof(pdata)); + pdata.num_leds = num_leds; + pdata.leds = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_leds: + kfree(p); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/Kconfig b/target/linux/lantiq/files/arch/mips/lantiq/falcon/Kconfig new file mode 100644 index 000000000..03e999d92 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/Kconfig @@ -0,0 +1,11 @@ +if SOC_FALCON + +menu "MIPS Machine" + +config LANTIQ_MACH_EASY98000 + bool "Easy98000" + default y + +endmenu + +endif diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/Makefile b/target/linux/lantiq/files/arch/mips/lantiq/falcon/Makefile new file mode 100644 index 000000000..3634154fb --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/Makefile @@ -0,0 +1,2 @@ +obj-y := prom.o reset.o sysctrl.o devices.o gpio.o +obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/addon-easy98000.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/addon-easy98000.c new file mode 100644 index 000000000..317ee4001 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/addon-easy98000.c @@ -0,0 +1,213 @@ +/* + * EASY98000 CPLD Addon driver + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> + +struct easy98000_reg_cpld { + u16 cmdreg1; /* 0x1 */ + u16 cmdreg0; /* 0x0 */ + u16 idreg0; /* 0x3 */ + u16 resreg; /* 0x2 */ + u16 intreg; /* 0x5 */ + u16 idreg1; /* 0x4 */ + u16 ledreg; /* 0x7 */ + u16 pcmconconfig; /* 0x6 */ + u16 res0; /* 0x9 */ + u16 ethledreg; /* 0x8 */ + u16 res1[4]; /* 0xa-0xd */ + u16 cpld1v; /* 0xf */ + u16 cpld2v; /* 0xe */ +}; +static struct easy98000_reg_cpld * const cpld = + (struct easy98000_reg_cpld *)(KSEG1 | 0x17c00000); +#define cpld_r8(reg) (__raw_readw(&cpld->reg) & 0xFF) +#define cpld_w8(val, reg) __raw_writew((val) & 0xFF, &cpld->reg) + +int easy98000_addon_has_dm9000(void) +{ + if ((cpld_r8(idreg0) & 0xF) == 1) + return 1; + return 0; +} + +#if defined(CONFIG_PROC_FS) +typedef void (*cpld_dump) (struct seq_file *s); +struct proc_entry { + char *name; + void *callback; +}; + +static int cpld_proc_show ( struct seq_file *s, void *p ) +{ + cpld_dump dump = s->private; + + if ( dump != NULL ) + dump(s); + + return 0; +} + +static int cpld_proc_open ( struct inode *inode, struct file *file ) +{ + return single_open ( file, cpld_proc_show, PDE(inode)->data ); +} + +static void cpld_versions_get ( struct seq_file *s ) +{ + seq_printf(s, "CPLD1: V%d\n", cpld_r8(cpld1v)); + seq_printf(s, "CPLD2: V%d\n", cpld_r8(cpld2v)); +} + +static void cpld_ebu_module_get ( struct seq_file *s ) +{ + u8 addon_id; + + addon_id = cpld_r8(idreg0) & 0xF; + switch (addon_id) { + case 0xF: /* nothing connected */ + break; + case 1: + seq_printf(s, "Ethernet Controller module (dm9000)\n"); + break; + default: + seq_printf(s, "Unknown EBU module (EBU_ID=0x%02X)\n", addon_id); + break; + } +} + +static void cpld_xmii_module_get ( struct seq_file *s ) +{ + u8 addon_id; + char *mod = NULL; + + addon_id = cpld_r8(idreg1) & 0xF; + switch (addon_id) { + case 0xF: + mod = "no module"; + break; + case 0x1: + mod = "RGMII module"; + break; + case 0x4: + mod = "GMII MAC Mode (XWAY TANTOS-3G)"; + break; + case 0x6: + mod = "TMII MAC Mode (XWAY TANTOS-3G)"; + break; + case 0x8: + mod = "GMII PHY module"; + break; + case 0x9: + mod = "MII PHY module"; + break; + case 0xA: + mod = "RMII PHY module"; + break; + default: + break; + } + if (mod) + seq_printf(s, "%s\n", mod); + else + seq_printf(s, "unknown xMII module (xMII_ID=0x%02X)\n", addon_id); +} + +static struct proc_entry proc_entries[] = { + {"versions", cpld_versions_get}, + {"ebu", cpld_ebu_module_get}, + {"xmii", cpld_xmii_module_get}, +}; + +static struct file_operations ops = { + .owner = THIS_MODULE, + .open = cpld_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void cpld_proc_entry_create(struct proc_dir_entry *parent_node, + struct proc_entry *proc_entry) +{ + proc_create_data ( proc_entry->name, (S_IFREG | S_IRUGO), parent_node, + &ops, proc_entry->callback); +} + +static int cpld_proc_install(void) +{ + struct proc_dir_entry *driver_proc_node; + + driver_proc_node = proc_mkdir("cpld", NULL); + if (driver_proc_node != NULL) { + int i; + for (i = 0; i < ARRAY_SIZE(proc_entries); i++) + cpld_proc_entry_create(driver_proc_node, + &proc_entries[i]); + } else { + printk("cannot create proc entry"); + return -1; + } + return 0; +} +#else +static inline int cpld_proc_install(void) {} +#endif + +static int easy98000_addon_probe(struct platform_device *pdev) +{ + return cpld_proc_install(); +} + +static int easy98000_addon_remove(struct platform_device *pdev) +{ +#if defined(CONFIG_PROC_FS) + char buf[64]; + int i; + + for (i = 0; i < sizeof(proc_entries) / sizeof(proc_entries[0]); i++) { + sprintf(buf, "cpld/%s", proc_entries[i].name); + remove_proc_entry(buf, 0); + } + remove_proc_entry("cpld", 0); +#endif + return 0; +} + +static struct platform_driver easy98000_addon_driver = { + .probe = easy98000_addon_probe, + .remove = __devexit_p(easy98000_addon_remove), + .driver = { + .name = "easy98000_addon", + .owner = THIS_MODULE, + }, +}; + +int __init easy98000_addon_init(void) +{ + return platform_driver_register(&easy98000_addon_driver); +} + +void __exit easy98000_addon_exit(void) +{ + platform_driver_unregister(&easy98000_addon_driver); +} + +module_init(easy98000_addon_init); +module_exit(easy98000_addon_exit); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c new file mode 100644 index 000000000..94622cfda --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c @@ -0,0 +1,161 @@ +/* + * EASY98000 CPLD LED driver + * + * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/leds.h> +#include <linux/slab.h> + +#include "dev-leds-easy98000-cpld.h" + +const char *led_name[8] = { + "ge0_act", + "ge0_link", + "ge1_act", + "ge1_link", + "fe2_act", + "fe2_link", + "fe3_act", + "fe3_link" +}; + +#define cpld_base7 ((u16 *)(KSEG1 | 0x17c0000c)) +#define cpld_base8 ((u16 *)(KSEG1 | 0x17c00012)) + +#define ltq_r16(reg) __raw_readw(reg) +#define ltq_w16(val, reg) __raw_writew(val, reg) + +struct cpld_led_dev { + struct led_classdev cdev; + u8 mask; + u16 *base; +}; + +struct cpld_led_drvdata { + struct cpld_led_dev *led_devs; + int num_leds; +}; + +void led_set(u8 mask, u16 *base) +{ + ltq_w16(ltq_r16(base) | mask, base); +} + +void led_clear(u8 mask, u16 *base) +{ + ltq_w16(ltq_r16(base) & (~mask), base); +} + +void led_blink_clear(u8 mask, u16 *base) +{ + led_clear(mask, base); +} + +static void led_brightness(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct cpld_led_dev *led_dev = + container_of(led_cdev, struct cpld_led_dev, cdev); + + if (value) + led_set(led_dev->mask, led_dev->base); + else + led_clear(led_dev->mask, led_dev->base); +} + +static int led_probe(struct platform_device *pdev) +{ + int i; + char name[32]; + struct cpld_led_drvdata *drvdata; + int ret = 0; + + drvdata = kzalloc(sizeof(struct cpld_led_drvdata) + + sizeof(struct cpld_led_dev) * MAX_LED, + GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + drvdata->led_devs = (struct cpld_led_dev *) &drvdata[1]; + + for (i = 0; i < MAX_LED; i++) { + struct cpld_led_dev *led_dev = &drvdata->led_devs[i]; + led_dev->cdev.brightness_set = led_brightness; + led_dev->cdev.default_trigger = NULL; + led_dev->mask = 1 << (i % 8); + if(i < 8) { + sprintf(name, "easy98000-cpld:%s", led_name[i]); + led_dev->base = cpld_base8; + } else { + sprintf(name, "easy98000-cpld:red:%d", i-8); + led_dev->base = cpld_base7; + } + led_dev->cdev.name = name; + ret = led_classdev_register(&pdev->dev, &led_dev->cdev); + if (ret) + goto err; + } + platform_set_drvdata(pdev, drvdata); + return 0; + +err: + printk("led_probe: 3\n"); + for (i = i - 1; i >= 0; i--) + led_classdev_unregister(&drvdata->led_devs[i].cdev); + + kfree(drvdata); + return ret; +} + +static int led_remove(struct platform_device *pdev) +{ + int i; + struct cpld_led_drvdata *drvdata = platform_get_drvdata(pdev); + for (i = 0; i < MAX_LED; i++) + led_classdev_unregister(&drvdata->led_devs[i].cdev); + kfree(drvdata); + return 0; +} + +static struct platform_driver led_driver = { + .probe = led_probe, + .remove = __devexit_p(led_remove), + .driver = { + .name = LED_NAME, + .owner = THIS_MODULE, + }, +}; + +int __init easy98000_cpld_led_init(void) +{ + pr_info(LED_DESC ", Version " LED_VERSION + " (c) Copyright 2011, Lantiq Deutschland GmbH\n"); + return platform_driver_register(&led_driver); +} + +void __exit easy98000_cpld_led_exit(void) +{ + platform_driver_unregister(&led_driver); +} + +module_init(easy98000_cpld_led_init); +module_exit(easy98000_cpld_led_exit); + +MODULE_DESCRIPTION(LED_NAME); +MODULE_DESCRIPTION(LED_DESC); +MODULE_AUTHOR("Ralph Hempel <ralph.hempel@lantiq.com>"); +MODULE_LICENSE("GPL v2"); + diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h b/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h new file mode 100644 index 000000000..3160189fe --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h @@ -0,0 +1,20 @@ +/* + * EASY98000 CPLD LED driver + * + * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _INCLUDE_EASY98000_CPLD_LED_H_ +#define _INCLUDE_EASY98000_CPLD_LED_H_ + +#define LED_NAME "easy98000_cpld_led" +#define LED_DESC "EASY98000 LED driver" +#define LED_VERSION "1.0.0" + +#define MAX_LED 16 + +#endif /* _INCLUDE_EASY98000_CPLD_LED_H_ */ diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.c new file mode 100644 index 000000000..e684ed470 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.c @@ -0,0 +1,152 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/platform_device.h> +#include <linux/mtd/nand.h> +#include <linux/gpio.h> + +#include <lantiq_soc.h> + +#include "devices.h" + +/* nand flash */ +/* address lines used for NAND control signals */ +#define NAND_ADDR_ALE 0x10000 +#define NAND_ADDR_CLE 0x20000 +/* Ready/Busy Status */ +#define MODCON_STS 0x0002 +/* Ready/Busy Status Edge */ +#define MODCON_STSEDGE 0x0004 + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static int +falcon_nand_ready(struct mtd_info *mtd) +{ + u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON); + + return (((modcon & (MODCON_STS | MODCON_STSEDGE)) == + (MODCON_STS | MODCON_STSEDGE))); +} + +static void +falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; + + if (ctrl & NAND_CTRL_CHANGE) { + nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE); + + if (ctrl & NAND_CLE) + nandaddr |= NAND_ADDR_CLE; + if (ctrl & NAND_ALE) + nandaddr |= NAND_ADDR_ALE; + + this->IO_ADDR_W = (void __iomem *) nandaddr; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static struct platform_nand_data falcon_flash_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 25, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = falcon_hwcontrol, + .dev_ready = falcon_nand_ready, + } +}; + +static struct resource ltq_nand_res = + MEM_RES("nand", LTQ_FLASH_START, LTQ_FLASH_MAX); + +static struct platform_device ltq_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = <q_nand_res, + .dev = { + .platform_data = &falcon_flash_nand_data, + }, +}; + +void __init +falcon_register_nand(void) +{ + platform_device_register(<q_flash_nand); +} + +/* gpio */ +#define DECLARE_GPIO_RES(port) \ +static struct resource falcon_gpio ## port ## _res[] = { \ + MEM_RES("gpio"#port, LTQ_GPIO ## port ## _BASE_ADDR, \ + LTQ_GPIO ## port ## _SIZE), \ + MEM_RES("padctrl"#port, LTQ_PADCTRL ## port ## _BASE_ADDR, \ + LTQ_PADCTRL ## port ## _SIZE), \ + IRQ_RES("gpio_mux"#port, FALCON_IRQ_GPIO_P ## port) \ +} +DECLARE_GPIO_RES(0); +DECLARE_GPIO_RES(1); +DECLARE_GPIO_RES(2); +DECLARE_GPIO_RES(3); +DECLARE_GPIO_RES(4); + +void __init +falcon_register_gpio(void) +{ + platform_device_register_simple("falcon_gpio", 0, + falcon_gpio0_res, ARRAY_SIZE(falcon_gpio0_res)); + platform_device_register_simple("falcon_gpio", 1, + falcon_gpio1_res, ARRAY_SIZE(falcon_gpio1_res)); + platform_device_register_simple("falcon_gpio", 2, + falcon_gpio2_res, ARRAY_SIZE(falcon_gpio2_res)); +} + +void __init +falcon_register_gpio_extra(void) +{ + platform_device_register_simple("falcon_gpio", 3, + falcon_gpio3_res, ARRAY_SIZE(falcon_gpio3_res)); + platform_device_register_simple("falcon_gpio", 4, + falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res)); +} + +/* spi flash */ +static struct platform_device ltq_spi = { + .name = "falcon_spi", + .num_resources = 0, +}; + +void __init +falcon_register_spi_flash(struct spi_board_info *data) +{ + spi_register_board_info(data, 1); + platform_device_register(<q_spi); +} + +/* i2c */ +static struct resource falcon_i2c_resources[] = { + MEM_RES("i2c", GPON_I2C_BASE, GPON_I2C_SIZE), + IRQ_RES(i2c_lb, FALCON_IRQ_I2C_LBREQ), + IRQ_RES(i2c_b, FALCON_IRQ_I2C_BREQ), + IRQ_RES(i2c_err, FALCON_IRQ_I2C_I2C_ERR), + IRQ_RES(i2c_p, FALCON_IRQ_I2C_I2C_P), +}; + +void __init +falcon_register_i2c(void) +{ + platform_device_register_simple("i2c-falcon", 0, + falcon_i2c_resources, ARRAY_SIZE(falcon_i2c_resources)); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.h b/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.h new file mode 100644 index 000000000..d81edbe74 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.h @@ -0,0 +1,25 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#ifndef _FALCON_DEVICES_H__ +#define _FALCON_DEVICES_H__ + +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include "../devices.h" + +extern void falcon_register_nand(void); +extern void falcon_register_gpio(void); +extern void falcon_register_gpio_extra(void); +extern void falcon_register_spi_flash(struct spi_board_info *data); +extern void falcon_register_i2c(void); + +#endif diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/gpio.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/gpio.c new file mode 100644 index 000000000..4147d61c7 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/gpio.c @@ -0,0 +1,409 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/err.h> +#include <linux/platform_device.h> + +#include <lantiq_soc.h> + +/* Multiplexer Control Register */ +#define LTQ_PADC_MUX(x) (x * 0x4) +/* Pad Control Availability Register */ +#define LTQ_PADC_AVAIL 0x000000F0 + +/* Data Output Register */ +#define LTQ_GPIO_OUT 0x00000000 +/* Data Input Register */ +#define LTQ_GPIO_IN 0x00000004 +/* Direction Register */ +#define LTQ_GPIO_DIR 0x00000008 +/* External Interrupt Control Register 0 */ +#define LTQ_GPIO_EXINTCR0 0x00000018 +/* External Interrupt Control Register 1 */ +#define LTQ_GPIO_EXINTCR1 0x0000001C +/* IRN Capture Register */ +#define LTQ_GPIO_IRNCR 0x00000020 +/* IRN Interrupt Configuration Register */ +#define LTQ_GPIO_IRNCFG 0x0000002C +/* IRN Interrupt Enable Set Register */ +#define LTQ_GPIO_IRNRNSET 0x00000030 +/* IRN Interrupt Enable Clear Register */ +#define LTQ_GPIO_IRNENCLR 0x00000034 +/* Output Set Register */ +#define LTQ_GPIO_OUTSET 0x00000040 +/* Output Cler Register */ +#define LTQ_GPIO_OUTCLR 0x00000044 +/* Direction Clear Register */ +#define LTQ_GPIO_DIRSET 0x00000048 +/* Direction Set Register */ +#define LTQ_GPIO_DIRCLR 0x0000004C + +/* turn a gpio_chip into a falcon_gpio_port */ +#define ctop(c) container_of(c, struct falcon_gpio_port, gpio_chip) +/* turn a irq_data into a falcon_gpio_port */ +#define itop(i) ((struct falcon_gpio_port *) irq_get_chip_data(i->irq)) + +#define ltq_pad_r32(p, reg) ltq_r32(p->pad + reg) +#define ltq_pad_w32(p, val, reg) ltq_w32(val, p->pad + reg) +#define ltq_pad_w32_mask(c, clear, set, reg) \ + ltq_pad_w32(c, (ltq_pad_r32(c, reg) & ~(clear)) | (set), reg) + +#define ltq_port_r32(p, reg) ltq_r32(p->port + reg) +#define ltq_port_w32(p, val, reg) ltq_w32(val, p->port + reg) +#define ltq_port_w32_mask(p, clear, set, reg) \ + ltq_port_w32(p, (ltq_port_r32(p, reg) & ~(clear)) | (set), reg) + +#define MAX_PORTS 5 +#define PINS_PER_PORT 32 + +struct falcon_gpio_port { + struct gpio_chip gpio_chip; + void __iomem *pad; + void __iomem *port; + unsigned int irq_base; + unsigned int chained_irq; + struct clk *clk; +}; + +static struct falcon_gpio_port ltq_gpio_port[MAX_PORTS]; + +int gpio_to_irq(unsigned int gpio) +{ + return __gpio_to_irq(gpio); +} +EXPORT_SYMBOL(gpio_to_irq); + +int ltq_gpio_mux_set(unsigned int pin, unsigned int mux) +{ + int port = pin / 100; + int offset = pin % 100; + struct falcon_gpio_port *gpio_port; + + if ((offset >= PINS_PER_PORT) || (port >= MAX_PORTS)) + return -EINVAL; + + gpio_port = <q_gpio_port[port]; + ltq_pad_w32(gpio_port, mux & 0x3, LTQ_PADC_MUX(offset)); + + return 0; +} +EXPORT_SYMBOL(ltq_gpio_mux_set); + +int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux, + unsigned int dir, const char *name) +{ + int port = pin / 100; + int offset = pin % 100; + + if (offset >= PINS_PER_PORT || port >= MAX_PORTS) + return -EINVAL; + + if (devm_gpio_request(dev, pin, name)) { + pr_err("failed to setup lantiq gpio: %s\n", name); + return -EBUSY; + } + + if (dir) + gpio_direction_output(pin, 1); + else + gpio_direction_input(pin); + + return ltq_gpio_mux_set(pin, mux); +} +EXPORT_SYMBOL(ltq_gpio_request); + +static int +falcon_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_DIRCLR); + + return 0; +} + +static void +falcon_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + if (value) + ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_OUTSET); + else + ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_OUTCLR); +} + +static int +falcon_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + falcon_gpio_set(chip, offset, value); + ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_DIRSET); + + return 0; +} + +static int +falcon_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + if ((ltq_port_r32(ctop(chip), LTQ_GPIO_DIR) >> offset) & 1) + return (ltq_port_r32(ctop(chip), LTQ_GPIO_OUT) >> offset) & 1; + else + return (ltq_port_r32(ctop(chip), LTQ_GPIO_IN) >> offset) & 1; +} + +static int +falcon_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + if ((ltq_pad_r32(ctop(chip), LTQ_PADC_AVAIL) >> offset) & 1) { + if (ltq_pad_r32(ctop(chip), LTQ_PADC_MUX(offset)) > 1) + return -EBUSY; + /* switch on gpio function */ + ltq_pad_w32(ctop(chip), 1, LTQ_PADC_MUX(offset)); + return 0; + } + + return -ENODEV; +} + +static void +falcon_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + if ((ltq_pad_r32(ctop(chip), LTQ_PADC_AVAIL) >> offset) & 1) { + if (ltq_pad_r32(ctop(chip), LTQ_PADC_MUX(offset)) > 1) + return; + /* switch off gpio function */ + ltq_pad_w32(ctop(chip), 0, LTQ_PADC_MUX(offset)); + } +} + +static int +falcon_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return ctop(chip)->irq_base + offset; +} + +static void +falcon_gpio_disable_irq(struct irq_data *d) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNENCLR); +} + +static void +falcon_gpio_enable_irq(struct irq_data *d) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + + if (!ltq_pad_r32(itop(d), LTQ_PADC_MUX(offset)) < 1) + /* switch on gpio function */ + ltq_pad_w32(itop(d), 1, LTQ_PADC_MUX(offset)); + + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNRNSET); +} + +static void +falcon_gpio_ack_irq(struct irq_data *d) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNCR); +} + +static void +falcon_gpio_mask_and_ack_irq(struct irq_data *d) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNENCLR); + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNCR); +} + +static struct irq_chip falcon_gpio_irq_chip; +static int +falcon_gpio_irq_type(struct irq_data *d, unsigned int type) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + unsigned int mask = 1 << offset; + + if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE) + return 0; + + if ((type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) != 0) { + /* level triggered */ + ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_IRNCFG); + irq_set_chip_and_handler_name(d->irq, + &falcon_gpio_irq_chip, handle_level_irq, "mux"); + } else { + /* edge triggered */ + ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_IRNCFG); + irq_set_chip_and_handler_name(d->irq, + &falcon_gpio_irq_chip, handle_simple_irq, "mux"); + } + + if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { + ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR0); + ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_EXINTCR1); + } else { + if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) != 0) + /* positive logic: rising edge, high level */ + ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR0); + else + /* negative logic: falling edge, low level */ + ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_EXINTCR0); + ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR1); + } + + return gpio_direction_input(itop(d)->gpio_chip.base + offset); +} + +static void +falcon_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct falcon_gpio_port *gpio_port = irq_desc_get_handler_data(desc); + unsigned long irncr; + int offset; + + /* acknowledge interrupt */ + irncr = ltq_port_r32(gpio_port, LTQ_GPIO_IRNCR); + ltq_port_w32(gpio_port, irncr, LTQ_GPIO_IRNCR); + + desc->irq_data.chip->irq_ack(&desc->irq_data); + + for_each_set_bit(offset, &irncr, gpio_port->gpio_chip.ngpio) + generic_handle_irq(gpio_port->irq_base + offset); +} + +static struct irq_chip falcon_gpio_irq_chip = { + .name = "gpio_irq_mux", + .irq_mask = falcon_gpio_disable_irq, + .irq_unmask = falcon_gpio_enable_irq, + .irq_ack = falcon_gpio_ack_irq, + .irq_mask_ack = falcon_gpio_mask_and_ack_irq, + .irq_set_type = falcon_gpio_irq_type, +}; + +static struct irqaction gpio_cascade = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "gpio_cascade", +}; + +static int +falcon_gpio_probe(struct platform_device *pdev) +{ + struct falcon_gpio_port *gpio_port; + int ret, i; + struct resource *gpiores, *padres; + int irq; + + if (pdev->id >= MAX_PORTS) + return -ENODEV; + + gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + padres = platform_get_resource(pdev, IORESOURCE_MEM, 1); + irq = platform_get_irq(pdev, 0); + if (!gpiores || !padres) + return -ENODEV; + + gpio_port = <q_gpio_port[pdev->id]; + gpio_port->gpio_chip.label = "falcon-gpio"; + gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input; + gpio_port->gpio_chip.direction_output = falcon_gpio_direction_output; + gpio_port->gpio_chip.get = falcon_gpio_get; + gpio_port->gpio_chip.set = falcon_gpio_set; + gpio_port->gpio_chip.request = falcon_gpio_request; + gpio_port->gpio_chip.free = falcon_gpio_free; + gpio_port->gpio_chip.base = 100 * pdev->id; + gpio_port->gpio_chip.ngpio = 32; + gpio_port->gpio_chip.dev = &pdev->dev; + + gpio_port->port = ltq_remap_resource(gpiores); + gpio_port->pad = ltq_remap_resource(padres); + + if (!gpio_port->port || !gpio_port->pad) { + dev_err(&pdev->dev, "Could not map io ranges\n"); + ret = -ENOMEM; + goto err; + } + + gpio_port->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(gpio_port->clk)) { + dev_err(&pdev->dev, "Could not get clock\n"); + ret = PTR_ERR(gpio_port->clk);; + goto err; + } + clk_enable(gpio_port->clk); + + if (irq > 0) { + /* irq_chip support */ + gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq; + gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * pdev->id); + + for (i = 0; i < 32; i++) { + irq_set_chip_and_handler_name(gpio_port->irq_base + i, + &falcon_gpio_irq_chip, handle_simple_irq, + "mux"); + irq_set_chip_data(gpio_port->irq_base + i, gpio_port); + /* set to negative logic (falling edge, low level) */ + ltq_port_w32_mask(gpio_port, 0, 1 << i, + LTQ_GPIO_EXINTCR0); + } + + gpio_port->chained_irq = irq; + setup_irq(irq, &gpio_cascade); + irq_set_handler_data(irq, gpio_port); + irq_set_chained_handler(irq, falcon_gpio_irq_handler); + } + + ret = gpiochip_add(&gpio_port->gpio_chip); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip %d, %d\n", + pdev->id, ret); + goto err; + } + platform_set_drvdata(pdev, gpio_port); + return ret; + +err: + dev_err(&pdev->dev, "Error in gpio_probe %d, %d\n", pdev->id, ret); + if (gpiores) + release_resource(gpiores); + if (padres) + release_resource(padres); + + if (gpio_port->port) + iounmap(gpio_port->port); + if (gpio_port->pad) + iounmap(gpio_port->pad); + return ret; +} + +static struct platform_driver falcon_gpio_driver = { + .probe = falcon_gpio_probe, + .driver = { + .name = "falcon_gpio", + .owner = THIS_MODULE, + }, +}; + +int __init +falcon_gpio_init(void) +{ + int ret; + + pr_info("FALC(tm) ON GPIO Driver, (C) 2011 Lantiq Deutschland Gmbh\n"); + ret = platform_driver_register(&falcon_gpio_driver); + if (ret) + pr_err("falcon_gpio: Error registering platform driver!"); + return ret; +} + +postcore_initcall(falcon_gpio_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-95C3AM1.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-95C3AM1.c new file mode 100644 index 000000000..42a3344ae --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-95C3AM1.c @@ -0,0 +1,94 @@ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c-gpio.h> + +#include <dev-gpio-leds.h> + +#include "../machtypes.h" +#include "devices.h" + +#define BOARD_95C3AM1_GPIO_LED_0 10 +#define BOARD_95C3AM1_GPIO_LED_1 11 +#define BOARD_95C3AM1_GPIO_LED_2 12 +#define BOARD_95C3AM1_GPIO_LED_3 13 + +static struct mtd_partition board_95C3AM1_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot_env", + .offset = 0x40000, + .size = 0x40000, /* 2 sectors for redundant env. */ + }, + { + .name = "linux", + .offset = 0x80000, + .size = 0xF80000, /* map only 16 MiB */ + }, +}; + +static struct flash_platform_data board_95C3AM1_flash_platform_data = { + .name = "sflash", + .parts = board_95C3AM1_partitions, + .nr_parts = ARRAY_SIZE(board_95C3AM1_partitions) +}; + +static struct spi_board_info board_95C3AM1_flash_data __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .platform_data = &board_95C3AM1_flash_platform_data +}; + +static struct gpio_led board_95C3AM1_gpio_leds[] __initdata = { + { + .name = "power", + .gpio = BOARD_95C3AM1_GPIO_LED_0, + .active_low = 0, + }, { + .name = "optical", + .gpio = BOARD_95C3AM1_GPIO_LED_1, + .active_low = 0, + }, { + .name = "lan", + .gpio = BOARD_95C3AM1_GPIO_LED_2, + .active_low = 0, + }, { + .name = "update", + .gpio = BOARD_95C3AM1_GPIO_LED_3, + .active_low = 0, + } +}; + +static struct i2c_gpio_platform_data board_95C3AM1_i2c_gpio_data = { + .sda_pin = 107, + .scl_pin = 108, +}; + +static struct platform_device board_95C3AM1_i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &board_95C3AM1_i2c_gpio_data, + } +}; + +static void __init board_95C3AM1_init(void) +{ + falcon_register_i2c(); + falcon_register_spi_flash(&board_95C3AM1_flash_data); + platform_device_register(&board_95C3AM1_i2c_gpio_device); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(board_95C3AM1_gpio_leds), + board_95C3AM1_gpio_leds); +} + +MIPS_MACHINE(LANTIQ_MACH_95C3AM1, + "95C3AM1", + "95C3AM1 Board", + board_95C3AM1_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98000.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98000.c new file mode 100644 index 000000000..fc5720d4e --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98000.c @@ -0,0 +1,138 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/eeprom.h> + +#include "../machtypes.h" + +#include "devices.h" + +static struct mtd_partition easy98000_nor_partitions[] = { + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot_env", + .offset = 0x40000, + .size = 0x40000, /* 2 sectors for redundant env. */ + }, + { + .name = "linux", + .offset = 0x80000, + .size = 0xF80000, /* map only 16 MiB */ + }, +}; + +struct physmap_flash_data easy98000_nor_flash_data = { + .nr_parts = ARRAY_SIZE(easy98000_nor_partitions), + .parts = easy98000_nor_partitions, +}; + +static struct flash_platform_data easy98000_spi_flash_platform_data = { + .name = "sflash", + .parts = easy98000_nor_partitions, + .nr_parts = ARRAY_SIZE(easy98000_nor_partitions) +}; + +static struct spi_board_info easy98000_spi_flash_data __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .platform_data = &easy98000_spi_flash_platform_data +}; + +/* setup gpio based spi bus/device for access to the eeprom on the board */ +#define SPI_GPIO_MRST 102 +#define SPI_GPIO_MTSR 103 +#define SPI_GPIO_CLK 104 +#define SPI_GPIO_CS0 105 +#define SPI_GPIO_CS1 106 +#define SPI_GPIO_BUS_NUM 1 + +static struct spi_gpio_platform_data easy98000_spi_gpio_data = { + .sck = SPI_GPIO_CLK, + .mosi = SPI_GPIO_MTSR, + .miso = SPI_GPIO_MRST, + .num_chipselect = 2, +}; + +static struct platform_device easy98000_spi_gpio_device = { + .name = "spi_gpio", + .id = SPI_GPIO_BUS_NUM, + .dev.platform_data = &easy98000_spi_gpio_data, +}; + +static struct spi_eeprom at25160n = { + .byte_len = 16 * 1024 / 8, + .name = "at25160n", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info easy98000_spi_gpio_devices __initdata = { + .modalias = "at25", + .bus_num = SPI_GPIO_BUS_NUM, + .max_speed_hz = 1000 * 1000, + .mode = SPI_MODE_3, + .chip_select = 1, + .controller_data = (void *) SPI_GPIO_CS1, + .platform_data = &at25160n, +}; + +static void __init +easy98000_init_common(void) +{ + spi_register_board_info(&easy98000_spi_gpio_devices, 1); + platform_device_register(&easy98000_spi_gpio_device); + falcon_register_i2c(); +} + +static void __init +easy98000_init(void) +{ + easy98000_init_common(); + ltq_register_nor(&easy98000_nor_flash_data); +} + +static void __init +easy98000sf_init(void) +{ + easy98000_init_common(); + falcon_register_spi_flash(&easy98000_spi_flash_data); +} + +static void __init +easy98000nand_init(void) +{ + easy98000_init_common(); + falcon_register_nand(); +} + +MIPS_MACHINE(LANTIQ_MACH_EASY98000, + "EASY98000", + "EASY98000 Eval Board", + easy98000_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY98000SF, + "EASY98000SF", + "EASY98000 Eval Board (Serial Flash)", + easy98000sf_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY98000NAND, + "EASY98000NAND", + "EASY98000 Eval Board (NAND Flash)", + easy98000nand_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98020.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98020.c new file mode 100644 index 000000000..4cdfc199d --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98020.c @@ -0,0 +1,118 @@ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <dev-gpio-leds.h> + +#include "../machtypes.h" +#include "devices.h" + +#define EASY98020_GPIO_LED_0 9 +#define EASY98020_GPIO_LED_1 10 +#define EASY98020_GPIO_LED_2 11 +#define EASY98020_GPIO_LED_3 12 +#define EASY98020_GPIO_LED_GE0_ACT 110 +#define EASY98020_GPIO_LED_GE0_LINK 109 +#define EASY98020_GPIO_LED_GE1_ACT 106 +#define EASY98020_GPIO_LED_GE1_LINK 105 + +static struct mtd_partition easy98020_spi_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot_env", + .offset = 0x40000, + .size = 0x40000, /* 2 sectors for redundant env. */ + }, + { + .name = "linux", + .offset = 0x80000, + .size = 0xF80000, /* map only 16 MiB */ + }, +}; + +static struct flash_platform_data easy98020_spi_flash_platform_data = { + .name = "sflash", + .parts = easy98020_spi_partitions, + .nr_parts = ARRAY_SIZE(easy98020_spi_partitions) +}; + +static struct spi_board_info easy98020_spi_flash_data __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .platform_data = &easy98020_spi_flash_platform_data +}; + +static struct gpio_led easy98020_gpio_leds[] __initdata = { + { + .name = "easy98020:green:0", + .gpio = EASY98020_GPIO_LED_0, + .active_low = 0, + }, { + .name = "easy98020:green:1", + .gpio = EASY98020_GPIO_LED_1, + .active_low = 0, + }, { + .name = "easy98020:green:2", + .gpio = EASY98020_GPIO_LED_2, + .active_low = 0, + }, { + .name = "easy98020:green:3", + .gpio = EASY98020_GPIO_LED_3, + .active_low = 0, + }, { + .name = "easy98020:ge0_act", + .gpio = EASY98020_GPIO_LED_GE0_ACT, + .active_low = 0, + }, { + .name = "easy98020:ge0_link", + .gpio = EASY98020_GPIO_LED_GE0_LINK, + .active_low = 0, + }, { + .name = "easy98020:ge1_act", + .gpio = EASY98020_GPIO_LED_GE1_ACT, + .active_low = 0, + }, { + .name = "easy98020:ge1_link", + .gpio = EASY98020_GPIO_LED_GE1_LINK, + .active_low = 0, + } +}; + +static void __init easy98020_init(void) +{ + falcon_register_i2c(); + falcon_register_spi_flash(&easy98020_spi_flash_data); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(easy98020_gpio_leds), + easy98020_gpio_leds); +} + +MIPS_MACHINE(LANTIQ_MACH_EASY98020, + "EASY98020", + "EASY98020 Eval Board", + easy98020_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY98020_1LAN, + "EASY98020_1LAN", + "EASY98020 Eval Board (1 LAN port)", + easy98020_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY98020_2LAN, + "EASY98020_2LAN", + "EASY98020 Eval Board (2 LAN ports)", + easy98020_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/prom.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/prom.c new file mode 100644 index 000000000..2a4eea178 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/prom.c @@ -0,0 +1,84 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <lantiq_soc.h> + +#include "devices.h" + +#include "../prom.h" + +#define SOC_FALCON "Falcon" +#define SOC_FALCON_D "Falcon-D" +#define SOC_FALCON_V "Falcon-V" +#define SOC_FALCON_M "Falcon-M" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFF000 +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 +#define SREV_SHIFT 22 +#define SREV_MASK 0x03C00000 +#define TYPE_SHIFT 26 +#define TYPE_MASK 0x3C000000 + +/* this parameter allows us enable/disable asc1 via commandline */ +static int register_asc1; +static int __init +ltq_parse_asc1(char *p) +{ + register_asc1 = 1; + return 0; +} +__setup("use_asc1", ltq_parse_asc1); + +void __init +ltq_soc_setup(void) +{ + ltq_register_asc(0); + ltq_register_wdt(); + falcon_register_gpio(); + if (register_asc1) + ltq_register_asc(1); +} + +void __init +ltq_soc_detect(struct ltq_soc_info *i) +{ + u32 type; + i->partnum = (ltq_r32(LTQ_FALCON_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_FALCON_CHIPID) & REV_MASK) >> REV_SHIFT; + i->srev = ((ltq_r32(LTQ_FALCON_CHIPCONF) & SREV_MASK) >> SREV_SHIFT); + sprintf(i->rev_type, "%c%d%d", (i->srev & 0x4) ? ('B') : ('A'), + i->rev & 0x7, (i->srev & 0x3) + 1); + + switch (i->partnum) { + case SOC_ID_FALCON: + type = (ltq_r32(LTQ_FALCON_CHIPTYPE) & TYPE_MASK) >> TYPE_SHIFT; + switch (type) { + case 0: + i->name = SOC_FALCON_D; + break; + case 1: + i->name = SOC_FALCON_V; + break; + case 2: + i->name = SOC_FALCON_M; + break; + default: + i->name = SOC_FALCON; + break; + } + i->type = SOC_TYPE_FALCON; + break; + + default: + unreachable(); + break; + } +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/reset.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/reset.c new file mode 100644 index 000000000..cbcadc5c4 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/reset.c @@ -0,0 +1,87 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/pm.h> +#include <asm/reboot.h> +#include <linux/export.h> + +#include <lantiq_soc.h> + +/* CPU0 Reset Source Register */ +#define LTQ_SYS1_CPU0RS 0x0040 +/* reset cause mask */ +#define LTQ_CPU0RS_MASK 0x0003 + +int +ltq_reset_cause(void) +{ + return ltq_sys1_r32(LTQ_SYS1_CPU0RS) & LTQ_CPU0RS_MASK; +} +EXPORT_SYMBOL_GPL(ltq_reset_cause); + +#define BOOT_REG_BASE (KSEG1 | 0x1F200000) +#define BOOT_PW1_REG (BOOT_REG_BASE | 0x20) +#define BOOT_PW2_REG (BOOT_REG_BASE | 0x24) +#define BOOT_PW1 0x4C545100 +#define BOOT_PW2 0x0051544C + +#define WDT_REG_BASE (KSEG1 | 0x1F8803F0) +#define WDT_PW1 0x00BE0000 +#define WDT_PW2 0x00DC0000 + +static void +ltq_machine_restart(char *command) +{ + pr_notice("System restart\n"); + local_irq_disable(); + + /* reboot magic */ + ltq_w32(BOOT_PW1, (void *)BOOT_PW1_REG); /* 'LTQ\0' */ + ltq_w32(BOOT_PW2, (void *)BOOT_PW2_REG); /* '\0QTL' */ + ltq_w32(0, (void *)BOOT_REG_BASE); /* reset Bootreg RVEC */ + + /* watchdog magic */ + ltq_w32(WDT_PW1, (void *)WDT_REG_BASE); + ltq_w32(WDT_PW2 | + (0x3 << 26) | /* PWL */ + (0x2 << 24) | /* CLKDIV */ + (0x1 << 31) | /* enable */ + (1), /* reload */ + (void *)WDT_REG_BASE); + unreachable(); +} + +static void +ltq_machine_halt(void) +{ + pr_notice("System halted.\n"); + local_irq_disable(); + unreachable(); +} + +static void +ltq_machine_power_off(void) +{ + pr_notice("Please turn off the power now.\n"); + local_irq_disable(); + unreachable(); +} + +static int __init +mips_reboot_setup(void) +{ + _machine_restart = ltq_machine_restart; + _machine_halt = ltq_machine_halt; + pm_power_off = ltq_machine_power_off; + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/sysctrl.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/sysctrl.c new file mode 100644 index 000000000..f27d69482 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/falcon/sysctrl.c @@ -0,0 +1,211 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/ioport.h> +#include <linux/export.h> +#include <linux/clkdev.h> +#include <asm/delay.h> + +#include <lantiq_soc.h> + +#include "devices.h" +#include "../clk.h" + +/* infrastructure control register */ +#define SYS1_INFRAC 0x00bc +/* Configuration fuses for drivers and pll */ +#define STATUS_CONFIG 0x0040 + +/* GPE frequency selection */ +#define GPPC_OFFSET 24 +#define GPEFREQ_MASK 0x00000C0 +#define GPEFREQ_OFFSET 10 +/* Clock status register */ +#define LTQ_SYSCTL_CLKS 0x0000 +/* Clock enable register */ +#define LTQ_SYSCTL_CLKEN 0x0004 +/* Clock clear register */ +#define LTQ_SYSCTL_CLKCLR 0x0008 +/* Activation Status Register */ +#define LTQ_SYSCTL_ACTS 0x0020 +/* Activation Register */ +#define LTQ_SYSCTL_ACT 0x0024 +/* Deactivation Register */ +#define LTQ_SYSCTL_DEACT 0x0028 +/* reboot Register */ +#define LTQ_SYSCTL_RBT 0x002c +/* CPU0 Clock Control Register */ +#define LTQ_SYS1_CPU0CC 0x0040 +/* clock divider bit */ +#define LTQ_CPU0CC_CPUDIV 0x0001 + +static struct resource ltq_sysctl_res[] = { + MEM_RES("sys1", LTQ_SYS1_BASE_ADDR, LTQ_SYS1_SIZE), + MEM_RES("syseth", LTQ_SYS_ETH_BASE_ADDR, LTQ_SYS_ETH_SIZE), + MEM_RES("sysgpe", LTQ_SYS_GPE_BASE_ADDR, LTQ_SYS_GPE_SIZE), +}; + +static struct resource ltq_status_res = + MEM_RES("status", LTQ_STATUS_BASE_ADDR, LTQ_STATUS_SIZE); +static struct resource ltq_ebu_res = + MEM_RES("ebu", LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE); + +static void __iomem *ltq_sysctl[3]; +static void __iomem *ltq_status_membase; +void __iomem *ltq_sys1_membase; +void __iomem *ltq_ebu_membase; + +#define ltq_reg_w32(m, x, y) ltq_w32((x), ltq_sysctl[m] + (y)) +#define ltq_reg_r32(m, x) ltq_r32(ltq_sysctl[m] + (x)) +#define ltq_reg_w32_mask(m, clear, set, reg) \ + ltq_reg_w32(m, (ltq_reg_r32(m, reg) & ~(clear)) | (set), reg) + +#define ltq_status_w32(x, y) ltq_w32((x), ltq_status_membase + (y)) +#define ltq_status_r32(x) ltq_r32(ltq_status_membase + (x)) + +static inline void +ltq_sysctl_wait(struct clk *clk, + unsigned int test, unsigned int reg) +{ + int err = 1000000; + + do {} while (--err && ((ltq_reg_r32(clk->module, reg) + & clk->bits) != test)); + if (!err) + pr_err("module de/activation failed %d %08X %08X %08X\n", + clk->module, clk->bits, test, + ltq_reg_r32(clk->module, reg) & clk->bits); +} + +static int +ltq_sysctl_activate(struct clk *clk) +{ + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN); + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_ACT); + ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS); + return 0; +} + +static void +ltq_sysctl_deactivate(struct clk *clk) +{ + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR); + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_DEACT); + ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_ACTS); +} + +static int +ltq_sysctl_clken(struct clk *clk) +{ + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN); + ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_CLKS); + return 0; +} + +static void +ltq_sysctl_clkdis(struct clk *clk) +{ + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR); + ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_CLKS); +} + +static void +ltq_sysctl_reboot(struct clk *clk) +{ + unsigned int act; + unsigned int bits; + + act = ltq_reg_r32(clk->module, LTQ_SYSCTL_ACT); + bits = ~act & clk->bits; + if (bits != 0) { + ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_CLKEN); + ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_ACT); + ltq_sysctl_wait(clk, bits, LTQ_SYSCTL_ACTS); + } + ltq_reg_w32(clk->module, act & clk->bits, LTQ_SYSCTL_RBT); + ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS); +} + +/* enable the ONU core */ +static void +ltq_gpe_enable(void) +{ + unsigned int freq; + unsigned int status; + + /* if if the clock is already enabled */ + status = ltq_reg_r32(SYSCTL_SYS1, SYS1_INFRAC); + if (status & (1 << (GPPC_OFFSET + 1))) + return; + + if (ltq_status_r32(STATUS_CONFIG) == 0) + freq = 1; /* use 625MHz on unfused chip */ + else + freq = (ltq_status_r32(STATUS_CONFIG) & + GPEFREQ_MASK) >> + GPEFREQ_OFFSET; + + /* apply new frequency */ + ltq_reg_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1), + freq << (GPPC_OFFSET + 2) , SYS1_INFRAC); + udelay(1); + + /* enable new frequency */ + ltq_reg_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC); + udelay(1); +} + +static inline void +clkdev_add_sys(const char *dev, unsigned int module, + unsigned int bits) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev; + clk->cl.con_id = NULL; + clk->cl.clk = clk; + clk->module = module; + clk->bits = bits; + clk->activate = ltq_sysctl_activate; + clk->deactivate = ltq_sysctl_deactivate; + clk->enable = ltq_sysctl_clken; + clk->disable = ltq_sysctl_clkdis; + clk->reboot = ltq_sysctl_reboot; + clkdev_add(&clk->cl); +} + +void __init +ltq_soc_init(void) +{ + int i; + + for (i = 0; i < 3; i++) + ltq_sysctl[i] = ltq_remap_resource(<q_sysctl_res[i]); + + ltq_sys1_membase = ltq_sysctl[0]; + ltq_status_membase = ltq_remap_resource(<q_status_res); + ltq_ebu_membase = ltq_remap_resource(<q_ebu_res); + + ltq_gpe_enable(); + + /* get our 3 static rates for cpu, fpi and io clocks */ + if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV) + clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M); + else + clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M); + + /* add our clock domains */ + clkdev_add_sys("falcon_gpio.0", SYSCTL_SYSETH, ACTS_PADCTRL0 | ACTS_P0); + clkdev_add_sys("falcon_gpio.1", SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1); + clkdev_add_sys("falcon_gpio.2", SYSCTL_SYSETH, ACTS_PADCTRL2 | ACTS_P2); + clkdev_add_sys("falcon_gpio.3", SYSCTL_SYS1, ACTS_PADCTRL3 | ACTS_P3); + clkdev_add_sys("falcon_gpio.4", SYSCTL_SYS1, ACTS_PADCTRL4 | ACTS_P4); + clkdev_add_sys("ltq_asc.1", SYSCTL_SYS1, ACTS_ASC1_ACT); + clkdev_add_sys("i2c-falcon.0", SYSCTL_SYS1, ACTS_I2C_ACT); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/Kconfig b/target/linux/lantiq/files/arch/mips/lantiq/svip/Kconfig new file mode 100644 index 000000000..f351a189a --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/Kconfig @@ -0,0 +1,16 @@ +if SOC_SVIP + +menu "Mips Machine" + +config LANTIQ_MACH_EASY33016 + bool "Easy33016" + default y + +config LANTIQ_MACH_EASY336 + select SYS_SUPPORTS_LITTLE_ENDIAN + bool "Easy336" + default y + +endmenu + +endif diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/Makefile b/target/linux/lantiq/files/arch/mips/lantiq/svip/Makefile new file mode 100644 index 000000000..405d65219 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/Makefile @@ -0,0 +1,3 @@ +obj-y := devices.o prom.o reset.o clk-svip.o gpio.o dma.o switchip_setup.o pms.o mux.o +obj-$(CONFIG_LANTIQ_MACH_EASY33016) += mach-easy33016.o +obj-$(CONFIG_LANTIQ_MACH_EASY336) += mach-easy336.o diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/clk-svip.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/clk-svip.c new file mode 100644 index 000000000..4a14df509 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/clk-svip.c @@ -0,0 +1,100 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/time.h> + +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> +#include <base_reg.h> +#include <sys0_reg.h> +#include <sys1_reg.h> +#include <status_reg.h> + +static struct svip_reg_status *const status = +(struct svip_reg_status *)LTQ_STATUS_BASE; +static struct svip_reg_sys0 *const sys0 = (struct svip_reg_sys0 *)LTQ_SYS0_BASE; +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; + +unsigned int ltq_svip_io_region_clock(void) +{ + return 200000000; /* 200 MHz */ +} +EXPORT_SYMBOL(ltq_svip_io_region_clock); + +unsigned int ltq_svip_cpu_hz(void) +{ + /* Magic BootROM speed location... */ + if ((*(u32 *)0x9fc07ff0) == 1) + return *(u32 *)0x9fc07ff4; + + if (STATUS_CONFIG_CLK_MODE_GET(status_r32(config)) == 1) { + /* xT16 */ + return 393216000; + } else { + switch (SYS0_PLL1CR_PLLDIV_GET(sys0_r32(pll1cr))) { + case 3: + return 475000000; + case 2: + return 450000000; + case 1: + return 425000000; + default: + return 400000000; + } + } +} +EXPORT_SYMBOL(ltq_svip_cpu_hz); + +unsigned int ltq_svip_fpi_hz(void) +{ + u32 fbs0_div[2] = {4, 8}; + u32 div; + + div = SYS1_FPICR_FPIDIV_GET(sys1_r32(fpicr)); + return ltq_svip_cpu_hz()/fbs0_div[div]; +} +EXPORT_SYMBOL(ltq_svip_fpi_hz); + +unsigned int ltq_get_ppl_hz(void) +{ + /* Magic BootROM speed location... */ + if ((*(u32 *)0x9fc07ff0) == 1) + return *(u32 *)0x9fc07ff4; + + if (STATUS_CONFIG_CLK_MODE_GET(status_r32(config)) == 1) { + /* xT16 */ + return 393216000; + } else { + switch (SYS0_PLL1CR_PLLDIV_GET(sys0_r32(pll1cr))) { + case 3: + return 475000000; + case 2: + return 450000000; + case 1: + return 425000000; + default: + return 400000000; + } + } +} + +unsigned int ltq_get_fbs0_hz(void) +{ + u32 fbs0_div[2] = {4, 8}; + u32 div; + + div = SYS1_FPICR_FPIDIV_GET(sys1_r32(fpicr)); + return ltq_get_ppl_hz()/fbs0_div[div]; +} +EXPORT_SYMBOL(ltq_get_fbs0_hz); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.c new file mode 100644 index 000000000..f1471169e --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.c @@ -0,0 +1,385 @@ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mtd/physmap.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/mtd/nand.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq.h> + +#include <base_reg.h> +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <ebu_reg.h> + +#include "devices.h" + +#include <lantiq_soc.h> +#include <svip_mux.h> +#include <svip_pms.h> + +/* ASC */ +void __init svip_register_asc(int port) +{ + switch (port) { + case 0: + ltq_register_asc(0); + svip_sys1_clk_enable(SYS1_CLKENR_ASC0); + break; + case 1: + ltq_register_asc(1); + svip_sys1_clk_enable(SYS1_CLKENR_ASC1); + break; + default: + break; + }; +} + +/* Ethernet */ +static unsigned char svip_ethaddr[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; + +static struct platform_device ltq_mii = { + .name = "ifxmips_mii0", + .dev = { + .platform_data = svip_ethaddr, + }, +}; + +static int __init svip_set_ethaddr(char *str) +{ + sscanf(str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &svip_ethaddr[0], &svip_ethaddr[1], &svip_ethaddr[2], + &svip_ethaddr[3], &svip_ethaddr[4], &svip_ethaddr[5]); + return 0; +} +__setup("ethaddr=", svip_set_ethaddr); + +void __init svip_register_eth(void) +{ + if (!is_valid_ether_addr(svip_ethaddr)) + random_ether_addr(svip_ethaddr); + + platform_device_register(<q_mii); + svip_sys1_clk_enable(SYS1_CLKENR_ETHSW); +} + +/* Virtual Ethernet */ +static struct platform_device ltq_ve = { + .name = "ifxmips_svip_ve", +}; + +void __init svip_register_virtual_eth(void) +{ + platform_device_register(<q_ve); +} + +/* SPI */ +static void __init ltq_register_ssc(int bus_num, unsigned long base, int irq_rx, + int irq_tx, int irq_err, int irq_frm) +{ + struct resource res[] = { + { + .name = "regs", + .start = base, + .end = base + 0x20 - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "rx", + .start = irq_rx, + .flags = IORESOURCE_IRQ, + }, { + .name = "tx", + .start = irq_tx, + .flags = IORESOURCE_IRQ, + }, { + .name = "err", + .start = irq_err, + .flags = IORESOURCE_IRQ, + }, { + .name = "frm", + .start = irq_frm, + .flags = IORESOURCE_IRQ, + }, + }; + + platform_device_register_simple("ifx_ssc", bus_num, res, + ARRAY_SIZE(res)); +} + +static struct spi_board_info bdinfo[] __initdata = { + { + .modalias = "xt16", + .mode = SPI_MODE_3, + .irq = INT_NUM_IM5_IRL0 + 28, + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 1, + }, + { + .modalias = "xt16", + .mode = SPI_MODE_3, + .irq = INT_NUM_IM5_IRL0 + 19, + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 2, + }, + { + .modalias = "loop", + .mode = SPI_MODE_0 | SPI_LOOP, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 3, + }, +}; + +void __init svip_register_spi(void) +{ + + ltq_register_ssc(0, LTQ_SSC0_BASE, INT_NUM_IM1_IRL0 + 6, + INT_NUM_IM1_IRL0 + 7, INT_NUM_IM1_IRL0 + 8, + INT_NUM_IM1_IRL0 + 9); + + ltq_register_ssc(1, LTQ_SSC1_BASE, INT_NUM_IM1_IRL0 + 10, + INT_NUM_IM1_IRL0 + 11, INT_NUM_IM1_IRL0 + 12, + INT_NUM_IM1_IRL0 + 13); + + spi_register_board_info(bdinfo, ARRAY_SIZE(bdinfo)); + + svip_sys1_clk_enable(SYS1_CLKENR_SSC0 | SYS1_CLKENR_SSC1); +} + +void __init svip_register_spi_flash(struct spi_board_info *bdinfo) +{ + spi_register_board_info(bdinfo, 1); +} + +/* GPIO */ +static struct platform_device ltq_gpio = { + .name = "ifxmips_gpio", +}; + +static struct platform_device ltq_gpiodev = { + .name = "GPIODEV", +}; + +void __init svip_register_gpio(void) +{ + platform_device_register(<q_gpio); + platform_device_register(<q_gpiodev); +} + +/* MUX */ +static struct ltq_mux_settings ltq_mux_settings; + +static struct platform_device ltq_mux = { + .name = "ltq_mux", + .dev = { + .platform_data = <q_mux_settings, + } +}; + +void __init svip_register_mux(const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS], + const struct ltq_mux_pin mux_p1[LTQ_MUX_P1_PINS], + const struct ltq_mux_pin mux_p2[LTQ_MUX_P2_PINS], + const struct ltq_mux_pin mux_p3[LTQ_MUX_P3_PINS], + const struct ltq_mux_pin mux_p4[LTQ_MUX_P4_PINS]) +{ + ltq_mux_settings.mux_p0 = mux_p0; + ltq_mux_settings.mux_p1 = mux_p1; + ltq_mux_settings.mux_p2 = mux_p2; + ltq_mux_settings.mux_p3 = mux_p3; + ltq_mux_settings.mux_p4 = mux_p4; + + if (mux_p0) + svip_sys1_clk_enable(SYS1_CLKENR_PORT0); + + if (mux_p1) + svip_sys1_clk_enable(SYS1_CLKENR_PORT1); + + if (mux_p2) + svip_sys1_clk_enable(SYS1_CLKENR_PORT2); + + if (mux_p3) + svip_sys1_clk_enable(SYS1_CLKENR_PORT3); + + if (mux_p4) + svip_sys2_clk_enable(SYS2_CLKENR_PORT4); + + platform_device_register(<q_mux); +} + +/* NAND */ +#define NAND_ADDR_REGION_BASE (LTQ_EBU_SEG1_BASE) +#define NAND_CLE_BIT (1 << 3) +#define NAND_ALE_BIT (1 << 2) + +static struct svip_reg_ebu *const ebu = (struct svip_reg_ebu *)LTQ_EBU_BASE; + +static int svip_nand_probe(struct platform_device *pdev) +{ + ebu_w32(LTQ_EBU_ADDR_SEL_0_BASE_VAL(CPHYSADDR(NAND_ADDR_REGION_BASE) + >> 12) + | LTQ_EBU_ADDR_SEL_0_MASK_VAL(15) + | LTQ_EBU_ADDR_SEL_0_MRME_VAL(0) + | LTQ_EBU_ADDR_SEL_0_REGEN_VAL(1), + addr_sel_0); + + ebu_w32(LTQ_EBU_CON_0_WRDIS_VAL(0) + | LTQ_EBU_CON_0_ADSWP_VAL(1) + | LTQ_EBU_CON_0_AGEN_VAL(0x00) + | LTQ_EBU_CON_0_SETUP_VAL(1) + | LTQ_EBU_CON_0_WAIT_VAL(0x00) + | LTQ_EBU_CON_0_WINV_VAL(0) + | LTQ_EBU_CON_0_PW_VAL(0x00) + | LTQ_EBU_CON_0_ALEC_VAL(0) + | LTQ_EBU_CON_0_BCGEN_VAL(0x01) + | LTQ_EBU_CON_0_WAITWRC_VAL(1) + | LTQ_EBU_CON_0_WAITRDC_VAL(1) + | LTQ_EBU_CON_0_HOLDC_VAL(1) + | LTQ_EBU_CON_0_RECOVC_VAL(0) + | LTQ_EBU_CON_0_CMULT_VAL(0x01), + con_0); + + /* + * ECC disabled + * CLE, ALE and CS are pulse, all other signal are latches based + * CLE and ALE are active high, PRE, WP, SE and CS/CE are active low + * OUT_CS_S is disabled + * NAND mode is disabled + */ + ebu_w32(LTQ_EBU_NAND_CON_ECC_ON_VAL(0) + | LTQ_EBU_NAND_CON_LAT_EN_VAL(0x38) + | LTQ_EBU_NAND_CON_OUT_CS_S_VAL(0) + | LTQ_EBU_NAND_CON_IN_CS_S_VAL(0) + | LTQ_EBU_NAND_CON_PRE_P_VAL(1) + | LTQ_EBU_NAND_CON_WP_P_VAL(1) + | LTQ_EBU_NAND_CON_SE_P_VAL(1) + | LTQ_EBU_NAND_CON_CS_P_VAL(1) + | LTQ_EBU_NAND_CON_CLE_P_VAL(0) + | LTQ_EBU_NAND_CON_ALE_P_VAL(0) + | LTQ_EBU_NAND_CON_CSMUX_E_VAL(0) + | LTQ_EBU_NAND_CON_NANDMODE_VAL(0), + nand_con); + + return 0; +} + +static void svip_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned long adr; + /* Coming here means to change either the enable state or + * the address for controlling ALE or CLE */ + + /* NAND_NCE: Select the chip by setting nCE to low. + * This is done in CON register */ + if (ctrl & NAND_NCE) + ebu_w32_mask(0, LTQ_EBU_NAND_CON_NANDMODE_VAL(1), + nand_con); + else + ebu_w32_mask(LTQ_EBU_NAND_CON_NANDMODE_VAL(1), + 0, nand_con); + + /* The addressing of CLE or ALE is done via different addresses. + We are now changing the address depending on the given action + SVIPs NAND_CLE_BIT = (1 << 3), NAND_CLE = 0x02 + NAND_ALE_BIT = (1 << 2) = NAND_ALE (0x04) */ + adr = (unsigned long)this->IO_ADDR_W; + adr &= ~(NAND_CLE_BIT | NAND_ALE_BIT); + adr |= (ctrl & NAND_CLE) << 2 | (ctrl & NAND_ALE); + this->IO_ADDR_W = (void __iomem *)adr; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static int svip_nand_ready(struct mtd_info *mtd) +{ + return (ebu_r32(nand_wait) & 0x01) == 0x01; +} + +static inline void svip_nand_wait(void) +{ + static const int nops = 150; + int i; + + for (i = 0; i < nops; i++) + asm("nop"); +} + +static void svip_nand_write_buf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) { + writeb(buf[i], this->IO_ADDR_W); + svip_nand_wait(); + } +} + +static void svip_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) { + buf[i] = readb(this->IO_ADDR_R); + svip_nand_wait(); + } +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data svip_flash_nand_data = { + .chip = { + .nr_chips = 1, + .part_probe_types = part_probes, + }, + .ctrl = { + .probe = svip_nand_probe, + .cmd_ctrl = svip_nand_hwcontrol, + .dev_ready = svip_nand_ready, + .write_buf = svip_nand_write_buf, + .read_buf = svip_nand_read_buf, + } +}; + +static struct resource svip_nand_resources[] = { + MEM_RES("nand", LTQ_FLASH_START, LTQ_FLASH_MAX), +}; + +static struct platform_device svip_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = ARRAY_SIZE(svip_nand_resources), + .resource = svip_nand_resources, + .dev = { + .platform_data = &svip_flash_nand_data, + }, +}; + +void __init svip_register_nand(void) +{ + platform_device_register(&svip_flash_nand); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.h b/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.h new file mode 100644 index 000000000..a064e67ec --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.h @@ -0,0 +1,23 @@ +#ifndef _SVIP_DEVICES_H__ +#define _SVIP_DEVICES_H__ + +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <svip_mux.h> +#include "../devices.h" + +extern void __init svip_register_asc(int port); +extern void __init svip_register_eth(void); +extern void __init svip_register_virtual_eth(void); +extern void __init svip_register_spi(void); +extern void __init svip_register_spi_flash(struct spi_board_info *bdinfo); +extern void __init svip_register_gpio(void); +extern void __init svip_register_mux(const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS], + const struct ltq_mux_pin mux_p1[LTQ_MUX_P1_PINS], + const struct ltq_mux_pin mux_p2[LTQ_MUX_P2_PINS], + const struct ltq_mux_pin mux_p3[LTQ_MUX_P3_PINS], + const struct ltq_mux_pin mux_p4[LTQ_MUX_P4_PINS]); +extern void __init svip_register_nand(void); + +#endif diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/dma.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/dma.c new file mode 100644 index 000000000..7464be1bd --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/dma.c @@ -0,0 +1,1206 @@ +/* + ** Copyright (C) 2005 Wu Qi Ming <Qi-Ming.Wu@infineon.com> + ** + ** This program is free software; you can redistribute it and/or modify + ** it under the terms of the GNU General Public License as published by + ** the Free Software Foundation; either version 2 of the License, or + ** (at your option) any later version. + ** + ** This program is distributed in the hope that it will be useful, + ** but WITHOUT ANY WARRANTY; without even the implied warranty of + ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + ** GNU General Public License for more details. + ** + ** You should have received a copy of the GNU General Public License + ** along with this program; if not, write to the Free Software + ** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* + * Description: + * Driver for SVIP DMA + * Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com] + * Created: 26-September-2005 + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/proc_fs.h> +#include <linux/stat.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/selection.h> +#include <linux/kmod.h> +#include <linux/vmalloc.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/semaphore.h> + +#include <base_reg.h> +#include <mps_reg.h> +#include <dma_reg.h> +#include <svip_dma.h> +#include <lantiq_soc.h> +#include <irq.h> +#include <sys1_reg.h> + +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; +static struct svip_reg_dma *const dma = (struct svip_reg_dma *)LTQ_DMA_BASE; +static struct svip_reg_mbs *const mbs = (struct svip_reg_mbs *)LTQ_MBS_BASE; + +#define DRV_NAME "ltq_dma" +extern void ltq_mask_and_ack_irq(struct irq_data *data); +extern void ltq_enable_irq(struct irq_data *data); + +static inline void mask_and_ack_irq(unsigned int irq_nr) +{ + static int i = 0; + struct irq_data data; + data.irq = irq_nr; + if ((i < 2) && (irq_nr == 137)) { + printk("eth delay hack\n"); + i++; + } + ltq_mask_and_ack_irq(&data); +} + +static inline void svip_enable_irq(unsigned int irq_nr) +{ + struct irq_data data; + data.irq = irq_nr; + ltq_enable_irq(&data); +} + +#define DMA_EMSG(fmt, args...) \ + printk(KERN_ERR "%s: " fmt, __func__, ## args) + +static inline void mbs_grab(void) +{ + while (mbs_r32(mbsr0) != 0); +} + +static inline void mbs_release(void) +{ + mbs_w32(0, mbsr0); + asm("sync"); +} + +/* max ports connecting to dma */ +#define LTQ_MAX_DMA_DEVICE_NUM ARRAY_SIZE(dma_devices) +/* max dma channels */ +#define LTQ_MAX_DMA_CHANNEL_NUM ARRAY_SIZE(dma_chan) + +/* bytes per descriptor */ +#define DMA_DESCR_SIZE 8 + +#define DMA_DESCR_CH_SIZE (DMA_DESCR_NUM * DMA_DESCR_SIZE) +#define DMA_DESCR_TOTAL_SIZE (LTQ_MAX_DMA_CHANNEL_NUM * DMA_DESCR_CH_SIZE) +#define DMA_DESCR_MEM_PAGES ((DMA_DESCR_TOTAL_SIZE / PAGE_SIZE) + \ + (((DMA_DESCR_TOTAL_SIZE % PAGE_SIZE) > 0))) + +/* budget for interrupt handling */ +#define DMA_INT_BUDGET 100 +/* set the correct counter value here! */ +#define DMA_POLL_COUNTER 32 + +struct proc_dir_entry *g_dma_dir; + +/* device_name | max_rx_chan_num | max_tx_chan_num | drop_enable */ +struct dma_device_info dma_devices[] = { + { "SW", 4, 4, 0 }, + { "DEU", 1, 1, 0 }, + { "SSC0", 1, 1, 0 }, + { "SSC1", 1, 1, 0 }, + { "MCTRL", 1, 1, 0 }, + { "PCM0", 1, 1, 0 }, + { "PCM1", 1, 1, 0 }, + { "PCM2", 1, 1, 0 }, + { "PCM3", 1, 1, 0 } +}; + +/* *dma_dev | dir | pri | irq | rel_chan_no */ +struct dma_channel_info dma_chan[] = { + { &dma_devices[0], DIR_RX, 0, INT_NUM_IM4_IRL0 + 0, 0 }, + { &dma_devices[0], DIR_TX, 0, INT_NUM_IM4_IRL0 + 1, 0 }, + { &dma_devices[0], DIR_RX, 1, INT_NUM_IM4_IRL0 + 2, 1 }, + { &dma_devices[0], DIR_TX, 1, INT_NUM_IM4_IRL0 + 3, 1 }, + { &dma_devices[0], DIR_RX, 2, INT_NUM_IM4_IRL0 + 4, 2 }, + { &dma_devices[0], DIR_TX, 2, INT_NUM_IM4_IRL0 + 5, 2 }, + { &dma_devices[0], DIR_RX, 3, INT_NUM_IM4_IRL0 + 6, 3 }, + { &dma_devices[0], DIR_TX, 3, INT_NUM_IM4_IRL0 + 7, 3 }, + { &dma_devices[1], DIR_RX, 0, INT_NUM_IM4_IRL0 + 8, 0 }, + { &dma_devices[1], DIR_TX, 0, INT_NUM_IM4_IRL0 + 9, 0 }, + { &dma_devices[2], DIR_RX, 0, INT_NUM_IM4_IRL0 + 10, 0 }, + { &dma_devices[2], DIR_TX, 0, INT_NUM_IM4_IRL0 + 11, 0 }, + { &dma_devices[3], DIR_RX, 0, INT_NUM_IM4_IRL0 + 12, 0 }, + { &dma_devices[3], DIR_TX, 0, INT_NUM_IM4_IRL0 + 13, 0 }, + { &dma_devices[4], DIR_RX, 0, INT_NUM_IM4_IRL0 + 14, 0 }, + { &dma_devices[4], DIR_TX, 0, INT_NUM_IM4_IRL0 + 15, 0 }, + { &dma_devices[5], DIR_RX, 0, INT_NUM_IM4_IRL0 + 16, 0 }, + { &dma_devices[5], DIR_TX, 0, INT_NUM_IM4_IRL0 + 17, 0 }, + { &dma_devices[6], DIR_RX, 1, INT_NUM_IM3_IRL0 + 18, 0 }, + { &dma_devices[6], DIR_TX, 1, INT_NUM_IM3_IRL0 + 19, 0 }, + { &dma_devices[7], DIR_RX, 2, INT_NUM_IM4_IRL0 + 20, 0 }, + { &dma_devices[7], DIR_TX, 2, INT_NUM_IM4_IRL0 + 21, 0 }, + { &dma_devices[8], DIR_RX, 3, INT_NUM_IM4_IRL0 + 22, 0 }, + { &dma_devices[8], DIR_TX, 3, INT_NUM_IM4_IRL0 + 23, 0 } +}; + +u64 *g_desc_list[DMA_DESCR_MEM_PAGES]; + +volatile u32 g_dma_int_status = 0; + +/* 0 - not in process, 1 - in process */ +volatile int g_dma_in_process; + +int ltq_dma_init(void); +void do_dma_tasklet(unsigned long); +DECLARE_TASKLET(dma_tasklet, do_dma_tasklet, 0); +irqreturn_t dma_interrupt(int irq, void *dev_id); + +u8 *common_buffer_alloc(int len, int *byte_offset, void **opt) +{ + u8 *buffer = kmalloc(len * sizeof(u8), GFP_KERNEL); + *byte_offset = 0; + return buffer; +} + +void common_buffer_free(u8 *dataptr, void *opt) +{ + kfree(dataptr); +} + +void enable_ch_irq(struct dma_channel_info *ch) +{ + int chan_no = (int)(ch - dma_chan); + unsigned long flag; + u32 val; + + if (ch->dir == DIR_RX) + val = DMA_CIE_DESCPT | DMA_CIE_DUR; + else + val = DMA_CIE_DESCPT; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32(val, cie); + dma_w32_mask(0, 1 << chan_no, irnen); + mbs_release(); + local_irq_restore(flag); + + svip_enable_irq(ch->irq); +} + +void disable_ch_irq(struct dma_channel_info *ch) +{ + unsigned long flag; + int chan_no = (int)(ch - dma_chan); + + local_irq_save(flag); + g_dma_int_status &= ~(1 << chan_no); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32(0, cie); + mbs_release(); + dma_w32_mask(1 << chan_no, 0, irnen); + local_irq_restore(flag); + + mask_and_ack_irq(ch->irq); +} + +int open_chan(struct dma_channel_info *ch) +{ + unsigned long flag; + int j; + int chan_no = (int)(ch - dma_chan); + u8 *buffer; + int byte_offset; + struct rx_desc *rx_desc_p; + struct tx_desc *tx_desc_p; + + if (ch->control == LTQ_DMA_CH_ON) + return -1; + + if (ch->dir == DIR_RX) { + for (j = 0; j < ch->desc_len; j++) { + rx_desc_p = (struct rx_desc *)ch->desc_base+j; + buffer = ch->dma_dev->buffer_alloc(ch->packet_size, + &byte_offset, + (void *)&ch->opt[j]); + if (!buffer) + return -ENOBUFS; + + rx_desc_p->data_pointer = (u32)CPHYSADDR((u32)buffer); + rx_desc_p->status.word = 0; + rx_desc_p->status.field.byte_offset = byte_offset; + rx_desc_p->status.field.data_length = ch->packet_size; + rx_desc_p->status.field.own = DMA_OWN; + } + } else { + for (j = 0; j < ch->desc_len; j++) { + tx_desc_p = (struct tx_desc *)ch->desc_base + j; + tx_desc_p->data_pointer = 0; + tx_desc_p->status.word = 0; + } + } + ch->xfer_cnt = 0; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32(ch->desc_len, cdlen); + dma_w32(0x7e, cis); + dma_w32(DMA_CCTRL_TXWGT_VAL(ch->tx_weight) + | DMA_CCTRL_CLASS_VAL(ch->pri) + | (ch->dir == DIR_RX ? DMA_CCTRL_ON_OFF : 0), cctrl); + mbs_release(); + ch->control = LTQ_DMA_CH_ON; + local_irq_restore(flag); + + if (request_irq(ch->irq, dma_interrupt, + IRQF_DISABLED, "dma-core", (void *)ch) != 0) { + printk(KERN_ERR "error, cannot get dma_irq!\n"); + return -EFAULT; + } + + enable_ch_irq(ch); + return 0; +} + +int close_chan(struct dma_channel_info *ch) +{ + unsigned long flag; + int j; + int chan_no = (int)(ch - dma_chan); + struct rx_desc *desc_p; + + if (ch->control == LTQ_DMA_CH_OFF) + return -1; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32_mask(DMA_CCTRL_ON_OFF, 0, cctrl); + mbs_release(); + disable_ch_irq(ch); + free_irq(ch->irq, (void *)ch); + ch->control = LTQ_DMA_CH_OFF; + local_irq_restore(flag); + + /* free descriptors in use */ + for (j = 0; j < ch->desc_len; j++) { + desc_p = (struct rx_desc *)ch->desc_base+j; + if ((desc_p->status.field.own == CPU_OWN && + desc_p->status.field.c) || + (desc_p->status.field.own == DMA_OWN)) { + if (desc_p->data_pointer) { + ch->dma_dev->buffer_free((u8 *)__va(desc_p->data_pointer), + (void *)ch->opt[j]); + desc_p->data_pointer = (u32)NULL; + } + } + } + + return 0; +} + +int reset_chan(struct dma_channel_info *ch) +{ + unsigned long flag; + int val; + int chan_no = (int)(ch - dma_chan); + + close_chan(ch); + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32_mask(0, DMA_CCTRL_RST, cctrl); + mbs_release(); + local_irq_restore(flag); + + do { + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + val = dma_r32(cctrl); + mbs_release(); + local_irq_restore(flag); + } while (val & DMA_CCTRL_RST); + + return 0; +} + +static inline void rx_chan_intr_handler(int chan_no) +{ + struct dma_device_info *dma_dev = (struct dma_device_info *) + dma_chan[chan_no].dma_dev; + struct dma_channel_info *ch = &dma_chan[chan_no]; + struct rx_desc *rx_desc_p; + unsigned long flag; + u32 val; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + val = dma_r32(cis); + dma_w32(DMA_CIS_DESCPT, cis); + mbs_release(); + + /* handle command complete interrupt */ + rx_desc_p = (struct rx_desc *)ch->desc_base + ch->curr_desc; + if ((rx_desc_p->status.word & (DMA_DESC_OWN_DMA | DMA_DESC_CPT_SET)) == + DMA_DESC_CPT_SET) { + local_irq_restore(flag); + /* Every thing is correct, then we inform the upper layer */ + dma_dev->current_rx_chan = ch->rel_chan_no; + if (dma_dev->intr_handler) + dma_dev->intr_handler(dma_dev, RCV_INT); + ch->weight--; + } else { + g_dma_int_status &= ~(1 << chan_no); + local_irq_restore(flag); + svip_enable_irq(dma_chan[chan_no].irq); + } +} + +static inline void tx_chan_intr_handler(int chan_no) +{ + struct dma_device_info *dma_dev = (struct dma_device_info *) + dma_chan[chan_no].dma_dev; + struct dma_channel_info *ch = &dma_chan[chan_no]; + struct tx_desc *tx_desc_p; + unsigned long flag; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32(DMA_CIS_DESCPT, cis); + mbs_release(); + + tx_desc_p = (struct tx_desc *)ch->desc_base+ch->prev_desc; + if ((tx_desc_p->status.word & (DMA_DESC_OWN_DMA | DMA_DESC_CPT_SET)) == + DMA_DESC_CPT_SET) { + local_irq_restore(flag); + + dma_dev->buffer_free((u8 *)__va(tx_desc_p->data_pointer), + ch->opt[ch->prev_desc]); + memset(tx_desc_p, 0, sizeof(struct tx_desc)); + dma_dev->current_tx_chan = ch->rel_chan_no; + if (dma_dev->intr_handler) + dma_dev->intr_handler(dma_dev, TRANSMIT_CPT_INT); + ch->weight--; + + ch->prev_desc = (ch->prev_desc + 1) % (ch->desc_len); + } else { + g_dma_int_status &= ~(1 << chan_no); + local_irq_restore(flag); + svip_enable_irq(dma_chan[chan_no].irq); + } +} + +void do_dma_tasklet(unsigned long unused) +{ + int i; + int chan_no = 0; + int budget = DMA_INT_BUDGET; + int weight = 0; + unsigned long flag; + + while (g_dma_int_status) { + if (budget-- < 0) { + tasklet_schedule(&dma_tasklet); + return; + } + chan_no = -1; + weight = 0; + /* WFQ algorithm to select the channel */ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + if (g_dma_int_status & (1 << i) && + dma_chan[i].weight > 0) { + if (dma_chan[i].weight > weight) { + chan_no = i; + weight = dma_chan[chan_no].weight; + } + } + } + if (chan_no >= 0) { + if (dma_chan[chan_no].dir == DIR_RX) + rx_chan_intr_handler(chan_no); + else + tx_chan_intr_handler(chan_no); + } else { + /* reset all the channels */ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) + dma_chan[i].weight = dma_chan[i].default_weight; + } + } + + local_irq_save(flag); + g_dma_in_process = 0; + if (g_dma_int_status) { + g_dma_in_process = 1; + tasklet_schedule(&dma_tasklet); + } + local_irq_restore(flag); +} + +irqreturn_t dma_interrupt(int irq, void *dev_id) +{ + struct dma_channel_info *ch; + int chan_no = 0; + + ch = (struct dma_channel_info *)dev_id; + chan_no = (int)(ch - dma_chan); + + if ((unsigned)chan_no >= LTQ_MAX_DMA_CHANNEL_NUM) { + printk(KERN_ERR "error: dma_interrupt irq=%d chan_no=%d\n", + irq, chan_no); + } + + g_dma_int_status |= 1 << chan_no; + dma_w32(1 << chan_no, irncr); + mask_and_ack_irq(irq); + + if (!g_dma_in_process) { + g_dma_in_process = 1; + tasklet_schedule(&dma_tasklet); + } + + return IRQ_RETVAL(1); +} + +struct dma_device_info *dma_device_reserve(char *dev_name) +{ + int i; + + ltq_dma_init(); + for (i = 0; i < LTQ_MAX_DMA_DEVICE_NUM; i++) { + if (strcmp(dev_name, dma_devices[i].device_name) == 0) { + if (dma_devices[i].reserved) + return NULL; + dma_devices[i].reserved = 1; + break; + } + } + + if (i == LTQ_MAX_DMA_DEVICE_NUM) + return NULL; + + return &dma_devices[i]; +} +EXPORT_SYMBOL(dma_device_reserve); + +int dma_device_release(struct dma_device_info *dma_dev) +{ + dma_dev->reserved = 0; + + return 0; +} +EXPORT_SYMBOL(dma_device_release); + +int dma_device_register(struct dma_device_info *dma_dev) +{ + int port_no = (int)(dma_dev - dma_devices); + int txbl, rxbl; + unsigned long flag; + + switch (dma_dev->tx_burst_len) { + case 8: + txbl = 3; + break; + case 4: + txbl = 2; + break; + default: + txbl = 1; + break; + } + + switch (dma_dev->rx_burst_len) { + case 8: + rxbl = 3; + break; + case 4: + rxbl = 2; + break; + default: + rxbl = 1; + } + + local_irq_save(flag); + mbs_grab(); + dma_w32(port_no, ps); + dma_w32(DMA_PCTRL_TXWGT_VAL(dma_dev->tx_weight) + | DMA_PCTRL_TXENDI_VAL(dma_dev->tx_endianness_mode) + | DMA_PCTRL_RXENDI_VAL(dma_dev->rx_endianness_mode) + | DMA_PCTRL_PDEN_VAL(dma_dev->drop_enable) + | DMA_PCTRL_TXBL_VAL(txbl) + | DMA_PCTRL_RXBL_VAL(rxbl), pctrl); + mbs_release(); + local_irq_restore(flag); + + return 0; +} +EXPORT_SYMBOL(dma_device_register); + +int dma_device_unregister(struct dma_device_info *dma_dev) +{ + int i; + int port_no = (int)(dma_dev - dma_devices); + unsigned long flag; + + /* flush memcopy module; has no effect for other ports */ + local_irq_save(flag); + mbs_grab(); + dma_w32(port_no, ps); + dma_w32_mask(0, DMA_PCTRL_GPC, pctrl); + mbs_release(); + local_irq_restore(flag); + + for (i = 0; i < dma_dev->max_tx_chan_num; i++) + reset_chan(dma_dev->tx_chan[i]); + + for (i = 0; i < dma_dev->max_rx_chan_num; i++) + reset_chan(dma_dev->rx_chan[i]); + + return 0; +} +EXPORT_SYMBOL(dma_device_unregister); + +/** + * Read Packet from DMA Rx channel. + * The function gets the data from the current rx descriptor assigned + * to the passed DMA device and passes it back to the caller. + * The function is called in the context of DMA interrupt. + * In detail the following actions are done: + * - get current receive descriptor + * - allocate memory via allocation callback function + * - pass data from descriptor to allocated memory + * - update channel weight + * - release descriptor + * - update current descriptor position + * + * \param *dma_dev - pointer to DMA device structure + * \param **dataptr - pointer to received data + * \param **opt + * \return packet length - length of received data + * \ingroup Internal + */ +int dma_device_read(struct dma_device_info *dma_dev, u8 **dataptr, void **opt) +{ + u8 *buf; + int len; + int byte_offset = 0; + void *p = NULL; + + struct dma_channel_info *ch = + dma_dev->rx_chan[dma_dev->current_rx_chan]; + + struct rx_desc *rx_desc_p; + + /* get the rx data first */ + rx_desc_p = (struct rx_desc *)ch->desc_base+ch->curr_desc; + buf = (u8 *)__va(rx_desc_p->data_pointer); + *(u32 *)dataptr = (u32)buf; + len = rx_desc_p->status.field.data_length; +#ifndef CONFIG_MIPS_UNCACHED + dma_cache_inv((unsigned long)buf, len); +#endif + if (opt) + *(int *)opt = (int)ch->opt[ch->curr_desc]; + + /* replace with a new allocated buffer */ + buf = dma_dev->buffer_alloc(ch->packet_size, &byte_offset, &p); + if (buf) { + ch->opt[ch->curr_desc] = p; + + wmb(); + rx_desc_p->data_pointer = (u32)CPHYSADDR((u32)buf); + rx_desc_p->status.word = (DMA_OWN << 31) \ + |(byte_offset << 23) \ + | ch->packet_size; + + wmb(); + } else { + *(u32 *)dataptr = 0; + if (opt) + *(int *)opt = 0; + } + + ch->xfer_cnt++; + /* increase the curr_desc pointer */ + ch->curr_desc++; + if (ch->curr_desc == ch->desc_len) + ch->curr_desc = 0; + /* return the length of the received packet */ + return len; +} +EXPORT_SYMBOL(dma_device_read); + +/** + * Write Packet through DMA Tx channel to peripheral. + * + * \param *dma_dev - pointer to DMA device structure + * \param *dataptr - pointer to data to be sent + * \param len - amount of data bytes to be sent + * \param *opt + * \return len - length of transmitted data + * \ingroup Internal + */ +int dma_device_write(struct dma_device_info *dma_dev, u8 *dataptr, int len, + void *opt) +{ + unsigned long flag; + u32 byte_offset; + struct dma_channel_info *ch; + int chan_no; + struct tx_desc *tx_desc_p; + local_irq_save(flag); + + ch = dma_dev->tx_chan[dma_dev->current_tx_chan]; + chan_no = (int)(ch - dma_chan); + + if (ch->control == LTQ_DMA_CH_OFF) { + local_irq_restore(flag); + printk(KERN_ERR "%s: dma channel %d not enabled!\n", + __func__, chan_no); + return 0; + } + + tx_desc_p = (struct tx_desc *)ch->desc_base+ch->curr_desc; + /* Check whether this descriptor is available */ + if (tx_desc_p->status.word & (DMA_DESC_OWN_DMA | DMA_DESC_CPT_SET)) { + /* if not , the tell the upper layer device */ + dma_dev->intr_handler(dma_dev, TX_BUF_FULL_INT); + local_irq_restore(flag); + return 0; + } + ch->opt[ch->curr_desc] = opt; + /* byte offset----to adjust the starting address of the data buffer, + * should be multiple of the burst length.*/ + byte_offset = ((u32)CPHYSADDR((u32)dataptr)) % + (dma_dev->tx_burst_len * 4); +#ifndef CONFIG_MIPS_UNCACHED + dma_cache_wback((unsigned long)dataptr, len); + wmb(); +#endif + tx_desc_p->data_pointer = (u32)CPHYSADDR((u32)dataptr) - byte_offset; + wmb(); + tx_desc_p->status.word = (DMA_OWN << 31) + | DMA_DESC_SOP_SET + | DMA_DESC_EOP_SET + | (byte_offset << 23) + | len; + wmb(); + + if (ch->xfer_cnt == 0) { + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32_mask(0, DMA_CCTRL_ON_OFF, cctrl); + mbs_release(); + } + + ch->xfer_cnt++; + ch->curr_desc++; + if (ch->curr_desc == ch->desc_len) + ch->curr_desc = 0; + + local_irq_restore(flag); + return len; +} +EXPORT_SYMBOL(dma_device_write); + +/** + * Display descriptor list via proc file + * + * \param chan_no - logical channel number + * \ingroup Internal + */ +int desc_list_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int len = 0; + int i; + static int chan_no; + u32 *p; + + if ((chan_no == 0) && (offset > count)) { + *eof = 1; + return 0; + } + + if (chan_no != 0) { + *start = buf; + } else { + buf = buf + offset; + *start = buf; + } + + p = (u32 *)dma_chan[chan_no].desc_base; + + if (dma_chan[chan_no].dir == DIR_RX) + len += sprintf(buf + len, + "channel %d %s Rx descriptor list:\n", + chan_no, dma_chan[chan_no].dma_dev->device_name); + else + len += sprintf(buf + len, + "channel %d %s Tx descriptor list:\n", + chan_no, dma_chan[chan_no].dma_dev->device_name); + len += sprintf(buf + len, + " no address data pointer command bits " + "(Own, Complete, SoP, EoP, Offset) \n"); + len += sprintf(buf + len, + "----------------------------------------------" + "-----------------------------------\n"); + for (i = 0; i < dma_chan[chan_no].desc_len; i++) { + len += sprintf(buf + len, "%3d ", i); + len += sprintf(buf + len, "0x%08x ", (u32)(p + (i * 2))); + len += sprintf(buf + len, "%08x ", *(p + (i * 2 + 1))); + len += sprintf(buf + len, "%08x ", *(p + (i * 2))); + + if (*(p + (i * 2)) & 0x80000000) + len += sprintf(buf + len, "D "); + else + len += sprintf(buf + len, "C "); + if (*(p + (i * 2)) & 0x40000000) + len += sprintf(buf + len, "C "); + else + len += sprintf(buf + len, "c "); + if (*(p + (i * 2)) & 0x20000000) + len += sprintf(buf + len, "S "); + else + len += sprintf(buf + len, "s "); + if (*(p + (i * 2)) & 0x10000000) + len += sprintf(buf + len, "E "); + else + len += sprintf(buf + len, "e "); + + /* byte offset is different for rx and tx descriptors*/ + if (dma_chan[chan_no].dir == DIR_RX) { + len += sprintf(buf + len, "%01x ", + (*(p + (i * 2)) & 0x01800000) >> 23); + } else { + len += sprintf(buf + len, "%02x ", + (*(p + (i * 2)) & 0x0F800000) >> 23); + } + + if (dma_chan[chan_no].curr_desc == i) + len += sprintf(buf + len, "<- CURR"); + + if (dma_chan[chan_no].prev_desc == i) + len += sprintf(buf + len, "<- PREV"); + + len += sprintf(buf + len, "\n"); + + } + + len += sprintf(buf + len, "\n"); + chan_no++; + if (chan_no > LTQ_MAX_DMA_CHANNEL_NUM - 1) + chan_no = 0; + + *eof = 1; + return len; +} + +/** + * Displays the weight of all DMA channels via proc file + * + * + * + * \param *buf + * \param **start + * \param offset + * \param count + * \param *eof + * \param *data + * \return len - amount of bytes written to file + */ +int channel_weight_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int i; + int len = 0; + len += sprintf(buf + len, "Qos dma channel weight list\n"); + len += sprintf(buf + len, "channel_num default_weight " + "current_weight device Tx/Rx\n"); + len += sprintf(buf + len, "---------------------------" + "---------------------------------\n"); + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + struct dma_channel_info *ch = &dma_chan[i]; + + if (ch->dir == DIR_RX) { + len += sprintf(buf + len, + " %2d %08x " + "%08x %10s Rx\n", + i, ch->default_weight, ch->weight, + ch->dma_dev->device_name); + } else { + len += sprintf(buf + len, + " %2d %08x " + "%08x %10s Tx\n", + i, ch->default_weight, ch->weight, + ch->dma_dev->device_name); + } + } + + return len; +} + +/** + * Provides DMA Register Content to proc file + * This function reads the content of general DMA Registers, DMA Channel + * Registers and DMA Port Registers and performs a structures output to the + * DMA proc file + * + * \param *buf + * \param **start + * \param offset + * \param count + * \param *eof + * \param *data + * \return len - amount of bytes written to file + */ +int dma_register_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int len = 0; + int i; + int limit = count; + unsigned long flags; + static int blockcount; + static int channel_no; + + if ((blockcount == 0) && (offset > count)) { + *eof = 1; + return 0; + } + + switch (blockcount) { + case 0: + len += sprintf(buf + len, "\nGeneral DMA Registers\n"); + len += sprintf(buf + len, "-------------------------" + "----------------\n"); + len += sprintf(buf + len, "CLC= %08x\n", dma_r32(clc)); + len += sprintf(buf + len, "ID= %08x\n", dma_r32(id)); + len += sprintf(buf + len, "DMA_CPOLL= %08x\n", dma_r32(cpoll)); + len += sprintf(buf + len, "DMA_CS= %08x\n", dma_r32(cs)); + len += sprintf(buf + len, "DMA_PS= %08x\n", dma_r32(ps)); + len += sprintf(buf + len, "DMA_IRNEN= %08x\n", dma_r32(irnen)); + len += sprintf(buf + len, "DMA_IRNCR= %08x\n", dma_r32(irncr)); + len += sprintf(buf + len, "DMA_IRNICR= %08x\n", + dma_r32(irnicr)); + len += sprintf(buf + len, "\nDMA Channel Registers\n"); + blockcount = 1; + return len; + break; + case 1: + /* If we had an overflow start at beginning of buffer + * otherwise use offset */ + if (channel_no != 0) { + *start = buf; + } else { + buf = buf + offset; + *start = buf; + } + + local_irq_save(flags); + for (i = channel_no; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + struct dma_channel_info *ch = &dma_chan[i]; + + if (len + 300 > limit) { + local_irq_restore(flags); + channel_no = i; + blockcount = 1; + return len; + } + len += sprintf(buf + len, "----------------------" + "-------------------\n"); + if (ch->dir == DIR_RX) { + len += sprintf(buf + len, + "Channel %d - Device %s Rx\n", + i, ch->dma_dev->device_name); + } else { + len += sprintf(buf + len, + "Channel %d - Device %s Tx\n", + i, ch->dma_dev->device_name); + } + dma_w32(i, cs); + len += sprintf(buf + len, "DMA_CCTRL= %08x\n", + dma_r32(cctrl)); + len += sprintf(buf + len, "DMA_CDBA= %08x\n", + dma_r32(cdba)); + len += sprintf(buf + len, "DMA_CIE= %08x\n", + dma_r32(cie)); + len += sprintf(buf + len, "DMA_CIS= %08x\n", + dma_r32(cis)); + len += sprintf(buf + len, "DMA_CDLEN= %08x\n", + dma_r32(cdlen)); + } + local_irq_restore(flags); + blockcount = 2; + channel_no = 0; + return len; + break; + case 2: + *start = buf; + /* + * display port dependent registers + */ + len += sprintf(buf + len, "\nDMA Port Registers\n"); + len += sprintf(buf + len, + "-----------------------------------------\n"); + local_irq_save(flags); + for (i = 0; i < LTQ_MAX_DMA_DEVICE_NUM; i++) { + dma_w32(i, ps); + len += sprintf(buf + len, + "Port %d DMA_PCTRL= %08x\n", + i, dma_r32(pctrl)); + } + local_irq_restore(flags); + blockcount = 0; + *eof = 1; + return len; + break; + } + + blockcount = 0; + *eof = 1; + return 0; +} + +/** + * Open Method of DMA Device Driver + * This function increments the device driver's use counter. + * + * + * \param + * \return + */ +static int dma_open(struct inode *inode, struct file *file) +{ + return 0; +} + +/** + * Release Method of DMA Device driver. + * This function decrements the device driver's use counter. + * + * + * \param + * \return + */ +static int dma_release(struct inode *inode, struct file *file) +{ + /* release the resources */ + return 0; +} + +/** + * Ioctl Interface to DMA Module + * + * \param None + * \return 0 - initialization successful + * <0 - failed initialization + */ +static long dma_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + int result = 0; + /* TODO: add some user controled functions here */ + return result; +} + +const static struct file_operations dma_fops = { + .owner = THIS_MODULE, + .open = dma_open, + .release = dma_release, + .unlocked_ioctl = dma_ioctl, +}; + +void map_dma_chan(struct dma_channel_info *map) +{ + int i; + + /* assign default values for channel settings */ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + dma_chan[i].byte_offset = 0; + dma_chan[i].open = &open_chan; + dma_chan[i].close = &close_chan; + dma_chan[i].reset = &reset_chan; + dma_chan[i].enable_irq = enable_ch_irq; + dma_chan[i].disable_irq = disable_ch_irq; + dma_chan[i].tx_weight = 1; + dma_chan[i].control = 0; + dma_chan[i].default_weight = LTQ_DMA_CH_DEFAULT_WEIGHT; + dma_chan[i].weight = dma_chan[i].default_weight; + dma_chan[i].curr_desc = 0; + dma_chan[i].prev_desc = 0; + } + + /* assign default values for port settings */ + for (i = 0; i < LTQ_MAX_DMA_DEVICE_NUM; i++) { + /*set default tx channel number to be one*/ + dma_devices[i].num_tx_chan = 1; + /*set default rx channel number to be one*/ + dma_devices[i].num_rx_chan = 1; + dma_devices[i].buffer_alloc = common_buffer_alloc; + dma_devices[i].buffer_free = common_buffer_free; + dma_devices[i].intr_handler = NULL; + dma_devices[i].tx_burst_len = 4; + dma_devices[i].rx_burst_len = 4; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + dma_devices[i].tx_endianness_mode = 0; + dma_devices[i].rx_endianness_mode = 0; +#else + dma_devices[i].tx_endianness_mode = 3; + dma_devices[i].rx_endianness_mode = 3; +#endif + } +} + +void dma_chip_init(void) +{ + int i; + + sys1_w32(SYS1_CLKENR_DMA, clkenr); + wmb(); + /* reset DMA */ + dma_w32(DMA_CTRL_RST, ctrl); + wmb(); + /* disable all the interrupts first */ + dma_w32(0, irnen); + + /* enable polling for all channels */ + dma_w32(DMA_CPOLL_EN | DMA_CPOLL_CNT_VAL(DMA_POLL_COUNTER), cpoll); + + /****************************************************/ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) + disable_ch_irq(&dma_chan[i]); +} + +int ltq_dma_init(void) +{ + int result = 0; + int i; + unsigned long flag; + static int dma_initialized; + + if (dma_initialized == 1) + return 0; + dma_initialized = 1; + + result = register_chrdev(DMA_MAJOR, "dma-core", &dma_fops); + if (result) { + DMA_EMSG("cannot register device dma-core!\n"); + return result; + } + + dma_chip_init(); + map_dma_chan(dma_chan); + + /* allocate DMA memory for buffer descriptors */ + for (i = 0; i < DMA_DESCR_MEM_PAGES; i++) { + g_desc_list[i] = (u64 *)__get_free_page(GFP_DMA); + if (g_desc_list[i] == NULL) { + DMA_EMSG("no memory for desriptor\n"); + return -ENOMEM; + } + g_desc_list[i] = (u64 *)KSEG1ADDR(g_desc_list[i]); + memset(g_desc_list[i], 0, PAGE_SIZE); + } + + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + int page_index, ch_per_page; + /* cross-link relative channels of a port to + * corresponding absolute channels */ + if (dma_chan[i].dir == DIR_RX) { + ((struct dma_device_info *)(dma_chan[i].dma_dev))-> + rx_chan[dma_chan[i].rel_chan_no] = &dma_chan[i]; + } else { + ((struct dma_device_info *)(dma_chan[i].dma_dev))-> + tx_chan[dma_chan[i].rel_chan_no] = &dma_chan[i]; + } + dma_chan[i].abs_chan_no = i; + + page_index = i * DMA_DESCR_CH_SIZE / PAGE_SIZE; + ch_per_page = PAGE_SIZE / DMA_DESCR_CH_SIZE + + ((PAGE_SIZE % DMA_DESCR_CH_SIZE) > 0); + dma_chan[i].desc_base = + (u32)g_desc_list[page_index] + + (i - page_index*ch_per_page) * DMA_DESCR_NUM*8; + dma_chan[i].curr_desc = 0; + dma_chan[i].desc_len = DMA_DESCR_NUM; + + local_irq_save(flag); + mbs_grab(); + dma_w32(i, cs); + dma_w32((u32)CPHYSADDR(dma_chan[i].desc_base), cdba); + mbs_release(); + local_irq_restore(flag); + } + + g_dma_dir = proc_mkdir("driver/" DRV_NAME, NULL); + + create_proc_read_entry("dma_register", + 0, + g_dma_dir, + dma_register_proc_read, + NULL); + + create_proc_read_entry("g_desc_list", + 0, + g_dma_dir, + desc_list_proc_read, + NULL); + + create_proc_read_entry("channel_weight", + 0, + g_dma_dir, + channel_weight_proc_read, + NULL); + + printk(KERN_NOTICE "SVIP DMA engine initialized\n"); + + return 0; +} + +/** + * Cleanup DMA device + * This function releases all resources used by the DMA device driver on + * module removal. + * + * + * \param None + * \return Nothing + */ +void dma_cleanup(void) +{ + int i; + unregister_chrdev(DMA_MAJOR, "dma-core"); + + for (i = 0; i < DMA_DESCR_MEM_PAGES; i++) + free_page(KSEG0ADDR((unsigned long)g_desc_list[i])); + remove_proc_entry("channel_weight", g_dma_dir); + remove_proc_entry("g_desc_list", g_dma_dir); + remove_proc_entry("dma_register", g_dma_dir); + remove_proc_entry("driver/" DRV_NAME, NULL); + /* release the resources */ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) + free_irq(dma_chan[i].irq, (void *)&dma_chan[i]); +} + +arch_initcall(ltq_dma_init); + +MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/gpio.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/gpio.c new file mode 100644 index 000000000..398339201 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/gpio.c @@ -0,0 +1,553 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <linux/ioctl.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/kobject.h> +#include <linux/workqueue.h> +#include <linux/skbuff.h> +#include <linux/netlink.h> +#include <linux/platform_device.h> +#include <net/sock.h> +#include <linux/uaccess.h> +#include <linux/version.h> +#include <linux/semaphore.h> + +#include <lantiq_soc.h> +#include <svip_mux.h> +#include <base_reg.h> +#include <port_reg.h> + +#define DRV_NAME "ifxmips_gpio" + +int gpio_to_irq(unsigned int gpio) +{ + return -EINVAL; +} +EXPORT_SYMBOL(gpio_to_irq); + +int irq_to_gpio(unsigned int gpio) +{ + return -EINVAL; +} +EXPORT_SYMBOL(irq_to_gpio); + +struct ltq_port_base { + struct svip_reg_port *base; + u32 pins; +}; + +/* Base addresses for ports */ +static const struct ltq_port_base ltq_port_base[] = { + { (struct svip_reg_port *)LTQ_PORT_P0_BASE, 20 }, + { (struct svip_reg_port *)LTQ_PORT_P1_BASE, 20 }, + { (struct svip_reg_port *)LTQ_PORT_P2_BASE, 19 }, + { (struct svip_reg_port *)LTQ_PORT_P3_BASE, 20 }, + { (struct svip_reg_port *)LTQ_PORT_P4_BASE, 24 } +}; + +#define MAX_PORTS ARRAY_SIZE(ltq_port_base) +#define PINS_PER_PORT(port) (ltq_port_base[port].pins) + +static inline +void ltq_port_set_exintcr0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->exintcr0) | (1 << pin), + ltq_port_base[port].base->exintcr0); +} + +static inline +void ltq_port_clear_exintcr0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->exintcr0) & ~(1 << pin), + ltq_port_base[port].base->exintcr0); +} + +static inline +void ltq_port_set_exintcr1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->exintcr1) | (1 << pin), + ltq_port_base[port].base->exintcr1); +} + +static inline +void ltq_port_clear_exintcr1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->exintcr1) & ~(1 << pin), + ltq_port_base[port].base->exintcr1); +} + +static inline +void ltq_port_set_irncfg(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->irncfg) | (1 << pin), + ltq_port_base[port].base->irncfg); +} + +static inline +void ltq_port_clear_irncfg(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->irncfg) & ~(1 << pin), + ltq_port_base[port].base->irncfg); +} + +static inline +void ltq_port_set_irnen(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(1 << pin, ltq_port_base[port].base->irnenset); +} + +static inline +void ltq_port_clear_irnen(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(1 << pin, ltq_port_base[port].base->irnenclr); +} + +static inline +void ltq_port_set_dir_out(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->dir) | (1 << pin), + ltq_port_base[port].base->dir); +} + +static inline +void ltq_port_set_dir_in(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->dir) & ~(1 << pin), + ltq_port_base[port].base->dir); +} + +static inline +void ltq_port_set_output(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->out) | (1 << pin), + ltq_port_base[port].base->out); +} + +static inline +void ltq_port_clear_output(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->out) & ~(1 << pin), + ltq_port_base[port].base->out); +} + +static inline +int ltq_port_get_input(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->in) & (1 << pin)) == 0; +} + +static inline +void ltq_port_set_puen(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->puen) | (1 << pin), + ltq_port_base[port].base->puen); +} + +static inline +void ltq_port_clear_puen(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->puen) & ~(1 << pin), + ltq_port_base[port].base->puen); +} + +static inline +void ltq_port_set_altsel0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->altsel0) | (1 << pin), + ltq_port_base[port].base->altsel0); +} + +static inline +void ltq_port_clear_altsel0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->altsel0) & ~(1 << pin), + ltq_port_base[port].base->altsel0); +} + +static inline +void ltq_port_set_altsel1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->altsel1) | (1 << pin), + ltq_port_base[port].base->altsel1); +} + +static inline +void ltq_port_clear_altsel1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->altsel1) & ~(1 << pin), + ltq_port_base[port].base->altsel1); +} + +void ltq_gpio_configure(int port, int pin, bool dirin, bool puen, + bool altsel0, bool altsel1) +{ + if (dirin) + ltq_port_set_dir_in(port, pin); + else + ltq_port_set_dir_out(port, pin); + + if (puen) + ltq_port_set_puen(port, pin); + else + ltq_port_clear_puen(port, pin); + + if (altsel0) + ltq_port_set_altsel0(port, pin); + else + ltq_port_clear_altsel0(port, pin); + + if (altsel1) + ltq_port_set_altsel1(port, pin); + else + ltq_port_clear_altsel1(port, pin); +} + +int ltq_port_get_dir(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->dir) & (1 << pin)) != 0; +} + +int ltq_port_get_puden(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->puen) & (1 << pin)) != 0; +} + +int ltq_port_get_altsel0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->altsel0) & (1 << pin)) != 0; +} + +int ltq_port_get_altsel1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->altsel1) & (1 << pin)) != 0; +} + +struct ltq_gpio_port { + struct gpio_chip gpio_chip; + unsigned int irq_base; + unsigned int chained_irq; +}; + +static struct ltq_gpio_port ltq_gpio_port[MAX_PORTS]; + +static int gpio_exported; +static int __init gpio_export_setup(char *str) +{ + get_option(&str, &gpio_exported); + return 1; +} +__setup("gpio_exported=", gpio_export_setup); + +static inline unsigned int offset2port(unsigned int offset) +{ + unsigned int i; + unsigned int prev = 0; + + for (i = 0; i < ARRAY_SIZE(ltq_port_base); i++) { + if (offset >= prev && + offset < prev + ltq_port_base[i].pins) + return i; + + prev = ltq_port_base[i].pins; + } + + return 0; +} + +static inline unsigned int offset2pin(unsigned int offset) +{ + unsigned int i; + unsigned int prev = 0; + + for (i = 0; i < ARRAY_SIZE(ltq_port_base); i++) { + if (offset >= prev && + offset < prev + ltq_port_base[i].pins) + return offset - prev; + + prev = ltq_port_base[i].pins; + } + + return 0; +} + +static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + ltq_port_set_dir_in(offset2port(offset), offset2pin(offset)); + return 0; +} + +static int ltq_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + ltq_port_set_dir_out(offset2port(offset), offset2pin(offset)); + return 0; +} + +static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + return ltq_port_get_input(offset2port(offset), offset2pin(offset)); +} + +static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + if (value) + ltq_port_set_output(offset2port(offset), offset2pin(offset)); + else + ltq_port_clear_output(offset2port(offset), offset2pin(offset)); +} + +static int svip_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return 0; +} + +static void ltq_gpio_free(struct gpio_chip *chip, unsigned offset) +{ +} + +static int ltq_gpio_probe(struct platform_device *pdev) +{ + int ret = 0; + struct ltq_gpio_port *gpio_port; + + if (pdev->id >= MAX_PORTS) + return -ENODEV; + + gpio_port = <q_gpio_port[pdev->id]; + gpio_port->gpio_chip.label = "ltq-gpio"; + + gpio_port->gpio_chip.direction_input = ltq_gpio_direction_input; + gpio_port->gpio_chip.direction_output = ltq_gpio_direction_output; + gpio_port->gpio_chip.get = ltq_gpio_get; + gpio_port->gpio_chip.set = ltq_gpio_set; + gpio_port->gpio_chip.request = svip_gpio_request; + gpio_port->gpio_chip.free = ltq_gpio_free; + gpio_port->gpio_chip.base = 100 * pdev->id; + gpio_port->gpio_chip.ngpio = 32; + gpio_port->gpio_chip.dev = &pdev->dev; + gpio_port->gpio_chip.exported = gpio_exported; + + ret = gpiochip_add(&gpio_port->gpio_chip); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip %d, %d\n", + pdev->id, ret); + goto err; + } + platform_set_drvdata(pdev, gpio_port); + + return 0; + +err: + return ret; +} + +static int ltq_gpio_remove(struct platform_device *pdev) +{ + struct ltq_gpio_port *gpio_port = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&gpio_port->gpio_chip); + + return ret; +} + +static struct platform_driver ltq_gpio_driver = { + .probe = ltq_gpio_probe, + .remove = __devexit_p(ltq_gpio_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +int __init ltq_gpio_init(void) +{ + int ret = platform_driver_register(<q_gpio_driver); + if (ret) + printk(KERN_INFO DRV_NAME + ": Error registering platform driver!"); + return ret; +} + +postcore_initcall(ltq_gpio_init); + +/** + * Convert interrupt number to corresponding port/pin pair + * Returns the port/pin pair serving the selected external interrupt; + * needed since mapping not linear. + * + * \param exint External interrupt number + * \param port Pointer for resulting port + * \param pin Pointer for resutling pin + * \return -EINVAL Invalid exint + * \return 0 port/pin updated + * \ingroup API + */ +static int ltq_exint2port(u32 exint, int *port, int *pin) +{ + if ((exint >= 0) && (exint <= 10)) { + *port = 0; + *pin = exint + 7; + } else if ((exint >= 11) && (exint <= 14)) { + *port = 1; + *pin = 18 - (exint - 11) ; + } else if (exint == 15) { + *port = 1; + *pin = 19; + } else if (exint == 16) { + *port = 0; + *pin = 19; + } else { + return -EINVAL; + } + return 0; +} + +/** + * Enable external interrupt. + * This function enables an external interrupt and sets the given mode. + * valid values for mode are: + * - 0 = Interrupt generation disabled + * - 1 = Interrupt on rising edge + * - 2 = Interrupt on falling edge + * - 3 = Interrupt on rising and falling edge + * - 5 = Interrupt on high level detection + * - 6 = Interrupt on low level detection + * + * \param exint - Number of external interrupt + * \param mode - Trigger mode + * \return 0 on success + * \ingroup API + */ +int ifx_enable_external_int(u32 exint, u32 mode) +{ + int port; + int pin; + + if ((mode < 0) || (mode > 6)) + return -EINVAL; + + if (ltq_exint2port(exint, &port, &pin)) + return -EINVAL; + + ltq_port_clear_exintcr0(port, pin); + ltq_port_clear_exintcr1(port, pin); + ltq_port_clear_irncfg(port, pin); + + if (mode & 0x1) + ltq_port_set_exintcr0(port, pin); + if (mode & 0x2) + ltq_port_set_exintcr1(port, pin); + if (mode & 0x4) + ltq_port_set_irncfg(port, pin); + + ltq_port_set_irnen(port, pin); + return 0; +} +EXPORT_SYMBOL(ifx_enable_external_int); + +/** + * Disable external interrupt. + * This function disables an external interrupt and sets mode to 0x00. + * + * \param exint - Number of external interrupt + * \return 0 on success + * \ingroup API + */ +int ifx_disable_external_int(u32 exint) +{ + int port; + int pin; + + if (ltq_exint2port(exint, &port, &pin)) + return -EINVAL; + + ltq_port_clear_irnen(port, pin); + return 0; +} +EXPORT_SYMBOL(ifx_disable_external_int); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy33016.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy33016.c new file mode 100644 index 000000000..c5993efd6 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy33016.c @@ -0,0 +1,73 @@ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include "../machtypes.h" + +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <svip_pms.h> + +#include "devices.h" + +static const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS] = { + LTQ_MUX_P0_0_SSC0_MTSR, + LTQ_MUX_P0_1_SSC0_MRST, + LTQ_MUX_P0_2_SSC0_SCLK, + LTQ_MUX_P0_3_SSC1_MTSR, + LTQ_MUX_P0_4_SSC1_MRST, + LTQ_MUX_P0_5_SSC1_SCLK, + LTQ_MUX_P0_6_SSC0_CS0, + LTQ_MUX_P0_7_SSC0_CS1, + LTQ_MUX_P0_8_SSC0_CS2, + LTQ_MUX_P0_9, + LTQ_MUX_P0_10, + LTQ_MUX_P0_11_EXINT4, + LTQ_MUX_P0_12, + LTQ_MUX_P0_13, + LTQ_MUX_P0_14_ASC0_TXD, + LTQ_MUX_P0_15_ASC0_RXD, + LTQ_MUX_P0_16_EXINT9, + LTQ_MUX_P0_17_EXINT10, + LTQ_MUX_P0_18_EJ_BRKIN, + LTQ_MUX_P0_19_EXINT16 +}; + +static void __init easy33016_init(void) +{ + svip_sys1_clk_enable(SYS1_CLKENR_L2C | + SYS1_CLKENR_DDR2 | + SYS1_CLKENR_SMI2 | + SYS1_CLKENR_SMI1 | + SYS1_CLKENR_SMI0 | + SYS1_CLKENR_FMI0 | + SYS1_CLKENR_DMA | + SYS1_CLKENR_SSC0 | + SYS1_CLKENR_SSC1 | + SYS1_CLKENR_EBU); + + svip_sys2_clk_enable(SYS2_CLKENR_HWSYNC | + SYS2_CLKENR_MBS | + SYS2_CLKENR_SWINT); + + svip_register_mux(mux_p0, NULL, NULL, NULL, NULL); + svip_register_asc(0); + svip_register_eth(); + svip_register_virtual_eth(); + ltq_register_wdt(); + svip_register_gpio(); + svip_register_spi(); + svip_register_nand(); +} + +MIPS_MACHINE(LANTIQ_MACH_EASY33016, + "EASY33016", + "EASY33016", + easy33016_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy336.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy336.c new file mode 100644 index 000000000..460bb7d85 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy336.c @@ -0,0 +1,221 @@ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include "../machtypes.h" + +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <svip_pms.h> + +#include "devices.h" + +static struct mtd_partition easy336_sflash_partitions[] = { + { + .name = "SPI flash", + .size = MTDPART_SIZ_FULL, + .offset = 0, + }, +}; + +static struct flash_platform_data easy336_sflash_data = { + .name = "m25p32", + .parts = (void *)&easy336_sflash_partitions, + .nr_parts = ARRAY_SIZE(easy336_sflash_partitions), + .type = "m25p32", +}; + +static struct spi_board_info bdinfo[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &easy336_sflash_data, + .mode = SPI_MODE_0, + .irq = -1, + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 0, + } +}; + +static struct mtd_partition easy336_partitions[] = { + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot_env", + .offset = 0x40000, + .size = 0x20000, + }, + { + .name = "linux", + .offset = 0x60000, + .size = 0x1a0000, + }, + { + .name = "rootfs", + .offset = 0x200000, + .size = 0x500000, + }, +}; + +static struct physmap_flash_data easy336_flash_data = { + .nr_parts = ARRAY_SIZE(easy336_partitions), + .parts = easy336_partitions, +}; + +static const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS] = { + LTQ_MUX_P0_0_SSC0_MTSR, + LTQ_MUX_P0_1_SSC0_MRST, + LTQ_MUX_P0_2_SSC0_SCLK, + LTQ_MUX_P0_3_SSC1_MTSR, + LTQ_MUX_P0_4_SSC1_MRST, + LTQ_MUX_P0_5_SSC1_SCLK, + LTQ_MUX_P0_6_SSC0_CS0, + LTQ_MUX_P0_7_SSC0_CS1, + LTQ_MUX_P0_8_SSC0_CS2, + LTQ_MUX_P0_9_SSC0_CS3, + LTQ_MUX_P0_10_SSC0_CS4, + LTQ_MUX_P0_11_SSC0_CS5, + LTQ_MUX_P0_12_EXINT5, + LTQ_MUX_P0_13_EXINT6, + LTQ_MUX_P0_14_ASC0_TXD, + LTQ_MUX_P0_15_ASC0_RXD, + LTQ_MUX_P0_16_EXINT9, + LTQ_MUX_P0_17_EXINT10, + LTQ_MUX_P0_18_EJ_BRKIN, + LTQ_MUX_P0_19_EXINT16 +}; + +static const struct ltq_mux_pin mux_p2[LTQ_MUX_P2_PINS] = { + LTQ_MUX_P2_0_EBU_A0, + LTQ_MUX_P2_1_EBU_A1, + LTQ_MUX_P2_2_EBU_A2, + LTQ_MUX_P2_3_EBU_A3, + LTQ_MUX_P2_4_EBU_A4, + LTQ_MUX_P2_5_EBU_A5, + LTQ_MUX_P2_6_EBU_A6, + LTQ_MUX_P2_7_EBU_A7, + LTQ_MUX_P2_8_EBU_A8, + LTQ_MUX_P2_9_EBU_A9, + LTQ_MUX_P2_10_EBU_A10, + LTQ_MUX_P2_11_EBU_A11, + LTQ_MUX_P2_12_EBU_RD, + LTQ_MUX_P2_13_EBU_WR, + LTQ_MUX_P2_14_EBU_ALE, + LTQ_MUX_P2_15_EBU_WAIT, + LTQ_MUX_P2_16_EBU_RDBY, + LTQ_MUX_P2_17_EBU_BC0, + LTQ_MUX_P2_18_EBU_BC1 +}; + +static const struct ltq_mux_pin mux_p3[LTQ_MUX_P3_PINS] = { + LTQ_MUX_P3_0_EBU_AD0, + LTQ_MUX_P3_1_EBU_AD1, + LTQ_MUX_P3_2_EBU_AD2, + LTQ_MUX_P3_3_EBU_AD3, + LTQ_MUX_P3_4_EBU_AD4, + LTQ_MUX_P3_5_EBU_AD5, + LTQ_MUX_P3_6_EBU_AD6, + LTQ_MUX_P3_7_EBU_AD7, + LTQ_MUX_P3_8_EBU_AD8, + LTQ_MUX_P3_9_EBU_AD9, + LTQ_MUX_P3_10_EBU_AD10, + LTQ_MUX_P3_11_EBU_AD11, + LTQ_MUX_P3_12_EBU_AD12, + LTQ_MUX_P3_13_EBU_AD13, + LTQ_MUX_P3_14_EBU_AD14, + LTQ_MUX_P3_15_EBU_AD15, + LTQ_MUX_P3_16_EBU_CS0, + LTQ_MUX_P3_17_EBU_CS1, + LTQ_MUX_P3_18_EBU_CS2, + LTQ_MUX_P3_19_EBU_CS3 +}; + +static void __init easy336_init_common(void) +{ + svip_sys1_clk_enable(SYS1_CLKENR_L2C | + SYS1_CLKENR_DDR2 | + SYS1_CLKENR_SMI2 | + SYS1_CLKENR_SMI1 | + SYS1_CLKENR_SMI0 | + SYS1_CLKENR_FMI0 | + SYS1_CLKENR_DMA | + SYS1_CLKENR_GPTC | + SYS1_CLKENR_EBU); + + svip_sys2_clk_enable(SYS2_CLKENR_HWSYNC | + SYS2_CLKENR_MBS | + SYS2_CLKENR_SWINT | + SYS2_CLKENR_HWACC3 | + SYS2_CLKENR_HWACC2 | + SYS2_CLKENR_HWACC1 | + SYS2_CLKENR_HWACC0 | + SYS2_CLKENR_SIF7 | + SYS2_CLKENR_SIF6 | + SYS2_CLKENR_SIF5 | + SYS2_CLKENR_SIF4 | + SYS2_CLKENR_SIF3 | + SYS2_CLKENR_SIF2 | + SYS2_CLKENR_SIF1 | + SYS2_CLKENR_SIF0 | + SYS2_CLKENR_DFEV7 | + SYS2_CLKENR_DFEV6 | + SYS2_CLKENR_DFEV5 | + SYS2_CLKENR_DFEV4 | + SYS2_CLKENR_DFEV3 | + SYS2_CLKENR_DFEV2 | + SYS2_CLKENR_DFEV1 | + SYS2_CLKENR_DFEV0); + + svip_register_mux(mux_p0, NULL, mux_p2, mux_p3, NULL); + svip_register_asc(0); + svip_register_eth(); + svip_register_virtual_eth(); + /* ltq_register_wdt(); - conflicts with lq_switch */ + svip_register_gpio(); + svip_register_spi(); + ltq_register_tapi(); +} + +static void __init easy336_init(void) +{ + easy336_init_common(); + ltq_register_nor(&easy336_flash_data); +} + +static void __init easy336sf_init(void) +{ + easy336_init_common(); + svip_register_spi_flash(bdinfo); +} + +static void __init easy336nand_init(void) +{ + easy336_init_common(); + svip_register_nand(); +} + +MIPS_MACHINE(LANTIQ_MACH_EASY336, + "EASY336", + "EASY336", + easy336_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY336SF, + "EASY336SF", + "EASY336 (Serial Flash)", + easy336sf_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY336NAND, + "EASY336NAND", + "EASY336 (NAND Flash)", + easy336nand_init); + diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/mux.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/mux.c new file mode 100644 index 000000000..56805e55b --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/mux.c @@ -0,0 +1,187 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <asm/addrspace.h> +#include <linux/platform_device.h> + +#include <lantiq_soc.h> +#include <svip_mux.h> +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <svip_pms.h> + +#define DRV_NAME "ltq_mux" + +static void ltq_mux_port_init(const int port, + const struct ltq_mux_pin *pins, + const int pin_max) +{ + unsigned int i; + + for (i = 0; i < pin_max; i++) + ltq_gpio_configure(port, + i, + pins[i].dirin, + pins[i].puen, + pins[i].altsel0, + pins[i].altsel1); +} + +static int ltq_mux_probe(struct platform_device *pdev) +{ + struct ltq_mux_settings *mux_settings = dev_get_platdata(&pdev->dev); + + if (mux_settings->mux_p0) + ltq_mux_port_init(0, + mux_settings->mux_p0, + LTQ_MUX_P0_PINS); + + if (mux_settings->mux_p1) + ltq_mux_port_init(1, + mux_settings->mux_p1, + LTQ_MUX_P1_PINS); + + if (mux_settings->mux_p2) + ltq_mux_port_init(2, + mux_settings->mux_p2, + LTQ_MUX_P2_PINS); + + if (mux_settings->mux_p3) + ltq_mux_port_init(3, + mux_settings->mux_p3, + LTQ_MUX_P3_PINS); + + if (mux_settings->mux_p4) + ltq_mux_port_init(4, + mux_settings->mux_p4, + LTQ_MUX_P4_PINS); + + return 0; +} + +int ltq_mux_read_procmem(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int len = 0; + int t = 0, i = 0; + u32 port_clk[5] = { + SYS1_CLKENR_PORT0, + SYS1_CLKENR_PORT1, + SYS1_CLKENR_PORT2, + SYS1_CLKENR_PORT3, + SYS2_CLKENR_PORT4, + }; + +#define PROC_PRINT(fmt, args...) \ + do { \ + int c_len = 0; \ + c_len = snprintf(buf + len, count - len, fmt, ## args); \ + if (c_len <= 0) \ + goto out; \ + if (c_len >= (count - len)) { \ + len += (count - len); \ + goto out; \ + } \ + len += c_len; \ + if (offset > 0) { \ + if (len > offset) { \ + len -= offset; \ + memmove(buf, buf + offset, len); \ + offset = 0; \ + } else { \ + offset -= len; \ + len = 0; \ + } \ + } \ + } while (0) + + PROC_PRINT("\nVINETIC-SVIP Multiplex Settings\n"); + PROC_PRINT(" 3 2 1 0\n"); + PROC_PRINT(" 10987654321098765432109876543210\n"); + PROC_PRINT(" --------------------------------\n"); + + for (i = 0; i < ARRAY_SIZE(port_clk); i++) { + if (i < 4) { + if (!svip_sys1_clk_is_enabled(port_clk[i])) + continue; + } else { + if (!svip_sys2_clk_is_enabled(port_clk[i])) + continue; + } + + PROC_PRINT("P%d.%-10s", i, "DIR:"); + + for (t = 31; t != -1; t--) + PROC_PRINT("%d", ltq_port_get_dir(i, t) == 1 ? 1 : 0); + PROC_PRINT("\n"); + + PROC_PRINT("P%d.%-10s", i, "PUEN:"); + for (t = 31; t != -1; t--) + PROC_PRINT("%d", ltq_port_get_puden(i, t) == 1 ? 1 : 0); + PROC_PRINT("\n"); + + PROC_PRINT("P%d.%-10s", i, "ALTSEL0:"); + for (t = 31; t != -1; t--) + PROC_PRINT("%d", + ltq_port_get_altsel0(i, t) == 1 ? 1 : 0); + PROC_PRINT("\n"); + + PROC_PRINT("P%d.%-10s", i, "ALTSEL1:"); + for (t = 31; t != -1; t--) + PROC_PRINT("%d", + ltq_port_get_altsel1(i, t) == 1 ? 1 : 0); + PROC_PRINT("\n\n"); + } + +out: + if (len < 0) { + len = 0; + *eof = 1; + } else if (len < count) { + *eof = 1; + } else { + len = count; + } + + *start = buf; + + return len; +} + +static struct platform_driver ltq_mux_driver = { + .probe = ltq_mux_probe, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +int __init ltq_mux_init(void) +{ + int ret = platform_driver_register(<q_mux_driver); + if (ret) { + printk(KERN_INFO DRV_NAME + ": Error registering platform driver!"); + return ret; + } + + return create_proc_read_entry("driver/ltq_mux", 0, NULL, + ltq_mux_read_procmem, NULL) == NULL; +} + +module_init(ltq_mux_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/pms.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/pms.c new file mode 100644 index 000000000..5c0c808a0 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/pms.c @@ -0,0 +1,101 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <asm/addrspace.h> + +#include <base_reg.h> +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <lantiq_soc.h> + +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; +static struct svip_reg_sys2 *const sys2 = (struct svip_reg_sys2 *)LTQ_SYS2_BASE; + +void svip_sys1_clk_enable(u32 mask) +{ + sys1_w32(sys1_r32(clksr) | mask, clkenr); + asm("sync;"); +} +EXPORT_SYMBOL(svip_sys1_clk_enable); + +int svip_sys1_clk_is_enabled(u32 mask) +{ + return (sys1_r32(clksr) & mask) != 0; +} +EXPORT_SYMBOL(svip_sys1_clk_is_enabled); + +void svip_sys2_clk_enable(u32 mask) +{ + sys2_w32(sys2_r32(clksr) | mask, clkenr); + asm("sync;"); +} +EXPORT_SYMBOL(svip_sys2_clk_enable); + +int svip_sys2_clk_is_enabled(u32 mask) +{ + return (sys2_r32(clksr) & mask) != 0; +} +EXPORT_SYMBOL(svip_sys2_clk_is_enabled); + +int ltq_pms_read_procmem(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + long len = 0; + int t = 0; + u32 bit = 0; + u32 reg_tmp, bits_tmp; + + len = sprintf(buf, "\nSVIP PMS Settings\n"); + len = len + sprintf(buf + len, + " 3 2 1 0\n"); + len = len + sprintf(buf + len, + " 210987654321098765432109876543210\n"); + len = len + sprintf(buf + len, + "---------------------------------------------\n"); + len = len + sprintf(buf + len, + "SYS1_CLKSR: "); + reg_tmp = sys1_r32(clksr); + bit = 0x80000000; + for (t = 31; t != -1; t--) { + bits_tmp = (reg_tmp & bit) >> t; + len = len + sprintf(buf + len, "%d", bits_tmp); + bit = bit >> 1; + } + len = len + sprintf(buf + len, "\n\n"); + len = len + sprintf(buf + len, "SYS2_CLKSR: "); + reg_tmp = sys2_r32(clksr); + bit = 0x80000000; + for (t = 31; t != -1; t--) { + bits_tmp = (reg_tmp & bit) >> t; + len = len + sprintf(buf + len, "%d", bits_tmp); + bit = bit >> 1; + } + len = len + sprintf(buf + len, "\n\n"); + + *eof = 1; + + return len; +} + +int __init ltq_pms_init_proc(void) +{ + return create_proc_read_entry("driver/ltq_pms", 0, NULL, + ltq_pms_read_procmem, NULL) == NULL; +} + +module_init(ltq_pms_init_proc); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/prom.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/prom.c new file mode 100644 index 000000000..1c1753160 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/prom.c @@ -0,0 +1,73 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/time.h> +#include <asm/bootinfo.h> + +#include <lantiq_soc.h> + +#include "../prom.h" +#include "../clk.h" +#include "../machtypes.h" + +#include <base_reg.h> +#include <ebu_reg.h> + +#define SOC_SVIP "SVIP" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFF000 +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 + +static struct svip_reg_ebu *const ebu = (struct svip_reg_ebu *)LTQ_EBU_BASE; + +void __init ltq_soc_init(void) +{ + clkdev_add_static(ltq_svip_cpu_hz(), ltq_svip_fpi_hz(), + ltq_svip_io_region_clock()); +} + +void __init +ltq_soc_setup(void) +{ + if (mips_machtype == LANTIQ_MACH_EASY33016 || + mips_machtype == LANTIQ_MACH_EASY336) { + ebu_w32(0x120000f1, addr_sel_2); + ebu_w32(LTQ_EBU_CON_0_ADSWP | + LTQ_EBU_CON_0_SETUP | + LTQ_EBU_CON_0_BCGEN_VAL(0x02) | + LTQ_EBU_CON_0_WAITWRC_VAL(7) | + LTQ_EBU_CON_0_WAITRDC_VAL(3) | + LTQ_EBU_CON_0_HOLDC_VAL(3) | + LTQ_EBU_CON_0_RECOVC_VAL(3) | + LTQ_EBU_CON_0_CMULT_VAL(3), con_2); + } +} + +void __init +ltq_soc_detect(struct ltq_soc_info *i) +{ + i->partnum = (ltq_r32(LTQ_STATUS_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_STATUS_CHIPID) & REV_MASK) >> REV_SHIFT; + sprintf(i->rev_type, "1.%d", i->rev); + switch (i->partnum) { + case SOC_ID_SVIP: + i->name = SOC_SVIP; + i->type = SOC_TYPE_SVIP; + break; + + default: + printk(KERN_ERR "unknown partnum : 0x%08X\n", i->partnum); + while (1); + break; + } +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/reset.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/reset.c new file mode 100644 index 000000000..5551875da --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/reset.c @@ -0,0 +1,95 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <linux/module.h> +#include <asm/reboot.h> + +#include <lantiq_soc.h> +#include "../machtypes.h" +#include <base_reg.h> +#include <sys1_reg.h> +#include <boot_reg.h> +#include <ebu_reg.h> + +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; +static struct svip_reg_ebu *const ebu = (struct svip_reg_ebu *)LTQ_EBU_BASE; + +#define CPLD_CMDREG3 ((volatile unsigned char*)(KSEG1 + 0x120000f3)) +extern void switchip_reset(void); + +static void ltq_machine_restart(char *command) +{ + printk(KERN_NOTICE "System restart\n"); + local_irq_disable(); + + if (mips_machtype == LANTIQ_MACH_EASY33016 || + mips_machtype == LANTIQ_MACH_EASY336) { + /* We just use the CPLD function to reset the entire system as a + workaround for the switch reset problem */ + local_irq_disable(); + ebu_w32(0x120000f1, addr_sel_2); + ebu_w32(0x404027ff, con_2); + + if (mips_machtype == LANTIQ_MACH_EASY336) + /* set bit 0 to reset SVIP */ + *CPLD_CMDREG3 = (1<<0); + else + /* set bit 7 to reset SVIP, set bit 3 to reset xT */ + *CPLD_CMDREG3 = (1<<7) | (1<<3); + } else { + *LTQ_BOOT_RVEC(0) = 0; + /* reset all except PER, SUBSYS and CPU0 */ + sys1_w32(0x00043F3E, rreqr); + /* release WDT0 reset */ + sys1_w32(0x00000100, rrlsr); + /* restore reset value for clock enables */ + sys1_w32(~0x0c000040, clkclr); + /* reset SUBSYS (incl. DDR2) and CPU0 */ + sys1_w32(0x00030001, rbtr); + } + + for (;;) + ; +} + +static void ltq_machine_halt(void) +{ + printk(KERN_NOTICE "System halted.\n"); + local_irq_disable(); + for (;;) + ; +} + +static void ltq_machine_power_off(void) +{ + printk(KERN_NOTICE "Please turn off the power now.\n"); + local_irq_disable(); + for (;;) + ; +} + +/* This function is used by the watchdog driver */ +int ltq_reset_cause(void) +{ + return 0; +} +EXPORT_SYMBOL_GPL(ltq_reset_cause); + +static int __init mips_reboot_setup(void) +{ + _machine_restart = ltq_machine_restart; + _machine_halt = ltq_machine_halt; + pm_power_off = ltq_machine_power_off; + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/switchip_setup.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/switchip_setup.c new file mode 100644 index 000000000..5da15327e --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/svip/switchip_setup.c @@ -0,0 +1,666 @@ +/****************************************************************************** + Copyright (c) 2007, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. + ****************************************************************************** + Module : switchip_setup.c + Date : 2007-11-09 + Description : Basic setup of embedded ethernet switch "SwitchIP" + Remarks: andreas.schmidt@infineon.com + + *****************************************************************************/ + +/* TODO: get rid of #ifdef CONFIG_LANTIQ_MACH_EASY336 */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/time.h> + +#include <base_reg.h> +#include <es_reg.h> +#include <sys1_reg.h> +#include <dma_reg.h> +#include <lantiq_soc.h> + +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; +static struct svip_reg_es *const es = (struct svip_reg_es *)LTQ_ES_BASE; + +/* PHY Organizationally Unique Identifier (OUI) */ +#define PHY_OUI_PMC 0x00E004 +#define PHY_OUI_VITESSE 0x008083 +#define PHY_OUI_DEFAULT 0xFFFFFF + +unsigned short switchip_phy_read(unsigned int phyaddr, unsigned int regaddr); +void switchip_phy_write(unsigned int phyaddr, unsigned int regaddr, + unsigned short data); + +static int phy_address[2] = {0, 1}; +static u32 phy_oui; +static void switchip_mdio_poll_init(void); +static void _switchip_mdio_poll(struct work_struct *work); + +/* struct workqueue_struct mdio_poll_task; */ +static struct workqueue_struct *mdio_poll_workqueue; +DECLARE_DELAYED_WORK(mdio_poll_work, _switchip_mdio_poll); +static int old_link_status[2] = {-1, -1}; + +/** + * Autonegotiation check. + * This funtion checks for link changes. If a link change has occured it will + * update certain switch registers. + */ +static void _switchip_check_phy_status(int port) +{ + int new_link_status; + unsigned short reg1; + + reg1 = switchip_phy_read(phy_address[port], 1); + if ((reg1 == 0xFFFF) || (reg1 == 0x0000)) + return; /* no PHY connected */ + + new_link_status = reg1 & 4; + if (old_link_status[port] ^ new_link_status) { + /* link status change */ + if (!new_link_status) { + if (port == 0) + es_w32_mask(LTQ_ES_P0_CTL_REG_FLP, 0, p0_ctl); + else + es_w32_mask(LTQ_ES_P0_CTL_REG_FLP, 0, p1_ctl); + + /* read again; link bit is latched low! */ + reg1 = switchip_phy_read(phy_address[port], 1); + new_link_status = reg1 & 4; + } + + if (new_link_status) { + unsigned short reg0, reg4, reg5, reg9, reg10; + int phy_pause, phy_speed, phy_duplex; + int aneg_enable, aneg_cmpt; + + reg0 = switchip_phy_read(phy_address[port], 0); + reg4 = switchip_phy_read(phy_address[port], 4); + aneg_enable = reg0 & 0x1000; + aneg_cmpt = reg1 & 0x20; + + if (aneg_enable && aneg_cmpt) { + reg5 = switchip_phy_read(phy_address[port], 5); + switch (phy_oui) { +#ifdef CONFIG_LANTIQ_MACH_EASY336 + case PHY_OUI_PMC: + /* PMC Sierra supports 1Gigabit FD, + * only. On successful + * auto-negotiation, we are sure this + * is what the LP can. */ + phy_pause = ((reg4 & reg5) & 0x0080) >> 7; + phy_speed = 2; + phy_duplex = 1; + break; +#endif + case PHY_OUI_VITESSE: + case PHY_OUI_DEFAULT: + reg9 = switchip_phy_read(phy_address[port], 9); + reg10 = switchip_phy_read(phy_address[port], 10); + + /* Check if advertise and partner + * agree on pause */ + phy_pause = ((reg4 & reg5) & 0x0400) >> 10; + + /* Find the best mode both partners + * support + * Priority: 1GB-FD, 1GB-HD, 100MB-FD, + * 100MB-HD, 10MB-FD, 10MB-HD */ + phy_speed = ((((reg9<<2) & reg10) + & 0x0c00) >> 6) | + (((reg4 & reg5) & 0x01e0) >> 5); + + if (phy_speed >= 0x0020) { + phy_speed = 2; + phy_duplex = 1; + } else if (phy_speed >= 0x0010) { + phy_speed = 2; + phy_duplex = 0; + } else if (phy_speed >= 0x0008) { + phy_speed = 1; + phy_duplex = 1; + } else if (phy_speed >= 0x0004) { + phy_speed = 1; + phy_duplex = 0; + } else if (phy_speed >= 0x0002) { + phy_speed = 0; + phy_duplex = 1; + } else { + phy_speed = 0; + phy_duplex = 0; + } + break; + default: + phy_pause = (reg4 & 0x0400) >> 10; + phy_speed = (reg0 & 0x40 ? 2 : (reg0 >> 13)&1); + phy_duplex = (reg0 >> 8)&1; + break; + } + } else { + /* parallel detection or fixed speed */ + phy_pause = (reg4 & 0x0400) >> 10; + phy_speed = (reg0 & 0x40 ? 2 : (reg0 >> 13)&1); + phy_duplex = (reg0 >> 8)&1; + } + + if (port == 0) { + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0SPD, + LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(phy_speed), + rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0DUP, + LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(phy_duplex), + rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0FCE, + LTQ_ES_RGMII_CTL_REG_P0FCE_VAL(phy_pause), + rgmii_ctl); + + es_w32_mask(0, LTQ_ES_P0_CTL_REG_FLP, p0_ctl); + } else { + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1SPD, + LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(phy_speed), + rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1DUP, + LTQ_ES_RGMII_CTL_REG_P1DUP_VAL(phy_duplex), + rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1FCE, + LTQ_ES_RGMII_CTL_REG_P0FCE_VAL(phy_pause), + rgmii_ctl); + + es_w32_mask(1, LTQ_ES_P0_CTL_REG_FLP, p1_ctl); + } + } + } + old_link_status[port] = new_link_status; +} + +static void _switchip_mdio_poll(struct work_struct *work) +{ + if (es_r32(sw_gctl0) & LTQ_ES_SW_GCTL0_REG_SE) { + _switchip_check_phy_status(0); + _switchip_check_phy_status(1); + } + + queue_delayed_work(mdio_poll_workqueue, &mdio_poll_work, HZ/2); +} + +static void switchip_mdio_poll_init(void) +{ + mdio_poll_workqueue = create_workqueue("SVIP MDIP poll"); + INIT_DELAYED_WORK(&mdio_poll_work, _switchip_mdio_poll); + + queue_delayed_work(mdio_poll_workqueue, &mdio_poll_work, HZ/2); + +} + +unsigned short switchip_phy_read(unsigned int phyaddr, unsigned int regaddr) +{ + /* TODO: protect MDIO access with semaphore */ + es_w32(LTQ_ES_MDIO_CTL_REG_MBUSY + | LTQ_ES_MDIO_CTL_REG_OP_VAL(2) /* read operation */ + | LTQ_ES_MDIO_CTL_REG_PHYAD_VAL(phyaddr) + | LTQ_ES_MDIO_CTL_REG_REGAD_VAL(regaddr), mdio_ctl); + while (es_r32(mdio_ctl) & LTQ_ES_MDIO_CTL_REG_MBUSY); + + return es_r32(mdio_data) & 0xFFFF; +} +EXPORT_SYMBOL(switchip_phy_read); + +void switchip_phy_write(unsigned int phyaddr, unsigned int regaddr, + unsigned short data) +{ + /* TODO: protect MDIO access with semaphore */ + es_w32(LTQ_ES_MDIO_CTL_REG_WD_VAL(data) + | LTQ_ES_MDIO_CTL_REG_MBUSY + | LTQ_ES_MDIO_CTL_REG_OP_VAL(1) /* write operation */ + | LTQ_ES_MDIO_CTL_REG_PHYAD_VAL(phyaddr) + | LTQ_ES_MDIO_CTL_REG_REGAD_VAL(regaddr), mdio_ctl); + while (es_r32(mdio_ctl) & LTQ_ES_MDIO_CTL_REG_MBUSY); + + return; +} +EXPORT_SYMBOL(switchip_phy_write); + +const static u32 switch_reset_offset_000[] = { + /*b8000000:*/ 0xffffffff, 0x00000001, 0x00000001, 0x00000003, + /*b8000010:*/ 0x04070001, 0x04070001, 0x04070001, 0xffffffff, + /*b8000020:*/ 0x00001be8, 0x00001be8, 0x00001be8, 0xffffffff, + /*b8000030:*/ 0x00000000, 0x00000000, 0x00080004, 0x00020001, + /*b8000040:*/ 0x00000000, 0x00000000, 0x00080004, 0x00020001, + /*b8000050:*/ 0x00000000, 0x00000000, 0x00080004, 0x00020001, + /*b8000060:*/ 0x00000000, 0x00000000, 0x00081000, 0x001f7777, + /*b8000070:*/ 0x00000000, 0x00000000, 0x0c00ac2b, 0x0000fa50, + /*b8000080:*/ 0x00001000, 0x00001800, 0x00000000, 0x00000000, + /*b8000090:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80000a0:*/ 0x00000000, 0x00000050, 0x00000010, 0x00000000, + /*b80000b0:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80000c0:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80000d0:*/ 0xffffffff, 0x00000000, 0x00000000 +}; +const static u32 switch_reset_offset_100[] = { + /*b8000100:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000110:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000120:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000130:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000140:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000150:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000160:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000170:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000180:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000190:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80001a0:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80001b0:*/ 0x00000000, 0x00000000 +}; + +/* + * Switch Reset. + */ +void switchip_reset(void) +{ + volatile unsigned int *reg; + volatile unsigned int rdreg; + int i; + + sys1_w32(SYS1_CLKENR_ETHSW, clkenr); + asm("sync"); + + /* disable P0 */ + es_w32_mask(0, LTQ_ES_P0_CTL_REG_SPS_VAL(1), p0_ctl); + /* disable P1 */ + es_w32_mask(0, LTQ_ES_P0_CTL_REG_SPS_VAL(1), p1_ctl); + /* disable P2 */ + es_w32_mask(0, LTQ_ES_P0_CTL_REG_SPS_VAL(1), p2_ctl); + + /************************************** + * BEGIN: Procedure to clear MAC table + **************************************/ + for (i = 0; i < 3; i++) { + int result; + + /* check if access engine is available */ + while (es_r32(adr_tb_st2) & LTQ_ES_ADR_TB_ST2_REG_BUSY); + + /* initialise to first address */ + es_w32(LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(3) + | LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(0), adr_tb_ctl2); + + /* wait while busy */ + while (es_r32(adr_tb_st2) & LTQ_ES_ADR_TB_ST2_REG_BUSY); + + /* setup the portmap */ + es_w32_mask(0, LTQ_ES_ADR_TB_CTL1_REG_PMAP_VAL(1 << i), + adr_tb_ctl1); + + do { + /* search for addresses by port */ + es_w32(LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(2) + | LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(9), adr_tb_ctl2); + + /* wait while busy */ + while (es_r32(adr_tb_st2) & LTQ_ES_ADR_TB_ST2_REG_BUSY); + + result = LTQ_ES_ADR_TB_ST2_REG_RSLT_GET(es_r32(adr_tb_st2)); + if (result == 0x101) { + printk(KERN_ERR "%s, cmd error\n", __func__); + return; + } + /* if Command OK, address found... */ + if (result == 0) { + unsigned char mac[6]; + + mac[5] = (es_r32(adr_tb_st0) >> 0) & 0xff; + mac[4] = (es_r32(adr_tb_st0) >> 8) & 0xff; + mac[3] = (es_r32(adr_tb_st0) >> 16) & 0xff; + mac[2] = (es_r32(adr_tb_st0) >> 24) & 0xff; + mac[1] = (es_r32(adr_tb_st1) >> 0) & 0xff; + mac[0] = (es_r32(adr_tb_st1) >> 8) & 0xff; + + /* setup address */ + es_w32((mac[5] << 0) | + (mac[4] << 8) | + (mac[3] << 16) | + (mac[2] << 24), adr_tb_ctl0); + es_w32(LTQ_ES_ADR_TB_CTL1_REG_PMAP_VAL(1<<i) | + LTQ_ES_ADR_TB_CTL1_REG_FID_VAL(0) | + (mac[0] << 8) | + (mac[1] << 0), adr_tb_ctl1); + /* erase address */ + + es_w32(LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(1) | + LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(15), + adr_tb_ctl2); + + /* wait, while busy */ + while (es_r32(adr_tb_st2) & + LTQ_ES_ADR_TB_ST2_REG_BUSY); + } + } while (result == 0); + } + /************************************** + * END: Procedure to clear MAC table + **************************************/ + + /* reset RMON counters */ + es_w32(LTQ_ES_RMON_CTL_REG_BAS | LTQ_ES_RMON_CTL_REG_CAC_VAL(3), + rmon_ctl); + + /* bring all registers to reset state */ + reg = LTQ_ES_PS_REG; + for (i = 0; i < ARRAY_SIZE(switch_reset_offset_000); i++) { + if ((reg == LTQ_ES_PS_REG) || + (reg >= LTQ_ES_ADR_TB_CTL0_REG && + reg <= LTQ_ES_ADR_TB_ST2_REG)) + continue; + + if (switch_reset_offset_000[i] != 0xFFFFFFFF) { + /* write reset value to register */ + *reg = switch_reset_offset_000[i]; + /* read register value back */ + rdreg = *reg; + if (reg == LTQ_ES_SW_GCTL1_REG) + rdreg &= ~LTQ_ES_SW_GCTL1_REG_BISTDN; + /* compare read value with written one */ + if (rdreg != switch_reset_offset_000[i]) { + printk(KERN_ERR "%s,%d: reg %08x mismatch " + "[has:%08x, expect:%08x]\n", + __func__, __LINE__, + (unsigned int)reg, rdreg, + switch_reset_offset_000[i]); + } + } + reg++; + } + + reg = LTQ_ES_VLAN_FLT0_REG; + for (i = 0; i < ARRAY_SIZE(switch_reset_offset_100); i++) { + *reg = switch_reset_offset_100[i]; + rdreg = *reg; + if (rdreg != switch_reset_offset_100[i]) { + printk(KERN_ERR "%s,%d: reg %08x mismatch " + "[has:%08x, expect:%08x]\n", __func__, __LINE__, + (unsigned int)reg, rdreg, + switch_reset_offset_100[i]); + } + reg++; + } +} +EXPORT_SYMBOL(switchip_reset); + +static u32 get_phy_oui(unsigned char phy_addr) +{ + u32 oui; + int i, bit, byte, shift, w; + u16 reg_id[2]; + + /* read PHY identifier registers 1 and 2 */ + reg_id[0] = switchip_phy_read(phy_addr, 2); + reg_id[1] = switchip_phy_read(phy_addr, 3); + + oui = 0; + w = 1; + shift = 7; + byte = 1; + for (i = 0, bit = 10; i <= 21; i++, bit++) { + oui |= ((reg_id[w] & (1<<bit)) ? 1 : 0) << shift; + if (!(shift % 8)) { + byte++; + if (byte == 2) + shift = 15; + else + shift = 21; + } else { + shift--; + } + if (w == 1 && bit == 15) { + bit = -1; + w = 0; + } + } + return oui; +} + +/* + * Switch Initialization. + */ +int switchip_init(void) +{ + int eth_port, phy_present = 0; + u16 reg, mode; + + sys1_w32(SYS1_CLKENR_ETHSW, clkenr); + asm("sync"); + + /* Enable Switch, if not already done so */ + if ((es_r32(sw_gctl0) & LTQ_ES_SW_GCTL0_REG_SE) == 0) + es_w32_mask(0, LTQ_ES_SW_GCTL0_REG_SE, sw_gctl0); + /* Wait for completion of MBIST */ + while (LTQ_ES_SW_GCTL1_REG_BISTDN_GET(es_r32(sw_gctl1)) == 0); + + switchip_reset(); + + mode = LTQ_ES_RGMII_CTL_REG_IS_GET(es_r32(rgmii_ctl)); + eth_port = (mode == 2 ? 1 : 0); + + /* Set the primary port(port toward backplane) as sniffer port, + changing from P2 which is the reset setting */ + es_w32_mask(LTQ_ES_SW_GCTL0_REG_SNIFFPN, + LTQ_ES_SW_GCTL0_REG_SNIFFPN_VAL(eth_port), + sw_gctl0); + + /* Point MDIO state machine to invalid PHY addresses 8 and 9 */ + es_w32_mask(0, LTQ_ES_SW_GCTL0_REG_PHYBA, sw_gctl0); + + /* Add CRC for packets from DMA to PMAC. + Remove CRC for packets from PMAC to DMA. */ + es_w32(LTQ_ES_PMAC_HD_CTL_RC | LTQ_ES_PMAC_HD_CTL_AC, pmac_hd_ctl); + + phy_oui = get_phy_oui(0); + switch (phy_oui) { +#ifdef CONFIG_LANTIQ_MACH_EASY336 + case PHY_OUI_PMC: + phy_address[0] = (mode == 2 ? -1 : 2); + phy_address[1] = (mode == 2 ? 2 : -1); + break; +#endif + case PHY_OUI_VITESSE: + default: + phy_oui = PHY_OUI_DEFAULT; + phy_address[0] = (mode == 2 ? 1 : 0); + phy_address[1] = (mode == 2 ? 0 : 1); + break; + } + + /****** PORT 0 *****/ + reg = switchip_phy_read(phy_address[0], 1); + if ((reg != 0x0000) && (reg != 0xffff)) { + /* PHY connected? */ + phy_present |= 1; + /* Set Rx- and TxDelay in case of RGMII */ + switch (mode) { + case 0: /* *RGMII,RGMII */ + case 2: /* RGMII,*GMII */ + /* program clock delay in PHY, not in SVIP */ + + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0RDLY, 0, rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0TDLY, 0, rgmii_ctl); + if (phy_oui == PHY_OUI_VITESSE || + phy_oui == PHY_OUI_DEFAULT) { + switchip_phy_write(phy_address[0], 31, 0x0001); + switchip_phy_write(phy_address[0], 28, 0xA000); + switchip_phy_write(phy_address[0], 31, 0x0000); + } + default: + break; + } + if (phy_oui == PHY_OUI_VITESSE || + phy_oui == PHY_OUI_DEFAULT) { + /* Program PHY advertisements and + * restart auto-negotiation */ + switchip_phy_write(phy_address[0], 4, 0x05E1); + switchip_phy_write(phy_address[0], 9, 0x0300); + switchip_phy_write(phy_address[0], 0, 0x3300); + } else { + reg = switchip_phy_read(phy_address[1], 0); + reg |= 0x1000; /* auto-negotiation enable */ + switchip_phy_write(phy_address[1], 0, reg); + reg |= 0x0200; /* auto-negotiation restart */ + switchip_phy_write(phy_address[1], 0, reg); + } + } else { + /* Force SWITCH link with highest capability: + * 100M FD for MII + * 1G FD for GMII/RGMII + */ + switch (mode) { + case 1: /* *MII,MII */ + case 3: /* *MII,RGMII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(1), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(1), + rgmii_ctl); + break; + case 0: /* *RGMII,RGMII */ + case 2: /* RGMII,*GMII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(2), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(1), + rgmii_ctl); + + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0RDLY, 0, rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0TDLY_VAL(2), + rgmii_ctl); + break; + } + + es_w32_mask(0, LTQ_ES_P0_CTL_REG_FLP, p0_ctl); + } + + /****** PORT 1 *****/ + reg = switchip_phy_read(phy_address[1], 1); + if ((reg != 0x0000) && (reg != 0xffff)) { + /* PHY connected? */ + phy_present |= 2; + /* Set Rx- and TxDelay in case of RGMII */ + switch (mode) { + case 0: /* *RGMII,RGMII */ + case 3: /* *MII,RGMII */ + /* program clock delay in PHY, not in SVIP */ + + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1RDLY, 0, rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1TDLY, 0, rgmii_ctl); + if (phy_oui == PHY_OUI_VITESSE || + phy_oui == PHY_OUI_DEFAULT) { + switchip_phy_write(phy_address[1], 31, 0x0001); + switchip_phy_write(phy_address[1], 28, 0xA000); + switchip_phy_write(phy_address[1], 31, 0x0000); + } + break; + case 2: /* RGMII,*GMII */ + + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(2), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl); +#ifdef CONFIG_LANTIQ_MACH_EASY336 + if (phy_oui == PHY_OUI_PMC) { + switchip_phy_write(phy_address[1], 24, 0x0510); + switchip_phy_write(phy_address[1], 17, 0xA38C); + switchip_phy_write(phy_address[1], 17, 0xA384); + } +#endif + break; + default: + break; + } + /* Program PHY advertisements and restart auto-negotiation */ + if (phy_oui == PHY_OUI_VITESSE || + phy_oui == PHY_OUI_DEFAULT) { + switchip_phy_write(phy_address[1], 4, 0x05E1); + switchip_phy_write(phy_address[1], 9, 0x0300); + switchip_phy_write(phy_address[1], 0, 0x3300); + } else { + reg = switchip_phy_read(phy_address[1], 0); + reg |= 0x1000; /* auto-negotiation enable */ + switchip_phy_write(phy_address[1], 0, reg); + reg |= 0x0200; /* auto-negotiation restart */ + switchip_phy_write(phy_address[1], 0, reg); + } + } else { + /* Force SWITCH link with highest capability: + * 100M FD for MII + * 1G FD for GMII/RGMII + */ + switch (mode) { + case 1: /* *MII,MII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(1), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl); + break; + case 0: /* *RGMII,RGMII */ + case 3: /* *MII,RGMII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(2), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1RDLY, 0, rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1TDLY_VAL(2), + rgmii_ctl); + break; + case 2: /* RGMII,*GMII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(2), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl); + break; + } + es_w32_mask(0, LTQ_ES_P0_CTL_REG_FLP, p0_ctl); + } + + /* + * Allow unknown unicast/multicast and broadcasts + * on all ports. + */ + + es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_UP_VAL(7), sw_gctl1); + es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_BP_VAL(7), sw_gctl1); + es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_MP_VAL(7), sw_gctl1); + es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_RP_VAL(7), sw_gctl1); + + /* Enable LAN port(s) */ + if (eth_port == 0) + es_w32_mask(LTQ_ES_P0_CTL_REG_SPS, 0, p0_ctl); + else + es_w32_mask(LTQ_ES_P0_CTL_REG_SPS, 0, p1_ctl); + /* Enable CPU Port (Forwarding State) */ + es_w32_mask(LTQ_ES_P0_CTL_REG_SPS, 0, p2_ctl); + + if (phy_present) + switchip_mdio_poll_init(); + + return 0; +} +EXPORT_SYMBOL(switchip_init); + +device_initcall(switchip_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/clk.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/clk.c new file mode 100644 index 000000000..5d850dc7b --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/clk.c @@ -0,0 +1,329 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/clk.h> + +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> + +#include "../clk.h" + +static unsigned int ltq_ram_clocks[] = { + CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M }; +#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3] + +#define BASIC_FREQUENCY_1 35328000 +#define BASIC_FREQUENCY_2 36000000 +#define BASIS_REQUENCY_USB 12000000 + +#define GET_BITS(x, msb, lsb) \ + (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) + +/* legacy xway clock */ +#define LTQ_CGU_PLL0_CFG 0x0004 +#define LTQ_CGU_PLL1_CFG 0x0008 +#define LTQ_CGU_PLL2_CFG 0x000C +#define LTQ_CGU_SYS 0x0010 +#define LTQ_CGU_UPDATE 0x0014 +#define LTQ_CGU_IF_CLK 0x0018 +#define LTQ_CGU_OSC_CON 0x001C +#define LTQ_CGU_SMD 0x0020 +#define LTQ_CGU_CT1SR 0x0028 +#define LTQ_CGU_CT2SR 0x002C +#define LTQ_CGU_PCMCR 0x0030 +#define LTQ_CGU_PCI_CR 0x0034 +#define LTQ_CGU_PD_PC 0x0038 +#define LTQ_CGU_FMR 0x003C + +#define CGU_PLL0_PHASE_DIVIDER_ENABLE \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31)) +#define CGU_PLL0_BYPASS \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30)) +#define CGU_PLL0_CFG_DSMSEL \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28)) +#define CGU_PLL0_CFG_FRAC_EN \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27)) +#define CGU_PLL1_SRC \ + (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31)) +#define CGU_PLL2_PHASE_DIVIDER_ENABLE \ + (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20)) +#define CGU_SYS_FPI_SEL (1 << 6) +#define CGU_SYS_DDR_SEL 0x3 +#define CGU_PLL0_SRC (1 << 29) + +#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17) +#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6) +#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2) +#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17) +#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13) + +/* vr9 clock */ +#define LTQ_CGU_SYS_VR9 0x0c +#define LTQ_CGU_IF_CLK_VR9 0x24 + + +static unsigned int ltq_get_pll0_fdiv(void); + +static inline unsigned int get_input_clock(int pll) +{ + switch (pll) { + case 0: + if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC) + return BASIS_REQUENCY_USB; + else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) + return BASIC_FREQUENCY_1; + else + return BASIC_FREQUENCY_2; + case 1: + if (CGU_PLL1_SRC) + return BASIS_REQUENCY_USB; + else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) + return BASIC_FREQUENCY_1; + else + return BASIC_FREQUENCY_2; + case 2: + switch (CGU_PLL2_SRC) { + case 0: + return ltq_get_pll0_fdiv(); + case 1: + return CGU_PLL2_PHASE_DIVIDER_ENABLE ? + BASIC_FREQUENCY_1 : + BASIC_FREQUENCY_2; + case 2: + return BASIS_REQUENCY_USB; + } + default: + return 0; + } +} + +static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den) +{ + u64 res, clock = get_input_clock(pll); + + res = num * clock; + do_div(res, den); + return res; +} + +static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = ((N + 1) << 10) + K; + unsigned int den = (M + 1) << 10; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = ((N + 1) << 11) + K + 512; + unsigned int den = (M + 1) << 11; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = K >= 512 ? + ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584; + unsigned int den = (M + 1) << 12; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int dsm(int pll, unsigned int M, unsigned int N, + unsigned int K, unsigned int dsmsel, unsigned int phase_div_en) +{ + if (!dsmsel) + return mash_dsm(pll, M, N, K); + else if (!phase_div_en) + return mash_dsm(pll, M, N, K); + else + return ssff_dsm_2(pll, M, N, K); +} + +static inline unsigned int ltq_get_pll0_fosc(void) +{ + if (CGU_PLL0_BYPASS) + return get_input_clock(0); + else + return !CGU_PLL0_CFG_FRAC_EN + ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0, + CGU_PLL0_CFG_DSMSEL, + CGU_PLL0_PHASE_DIVIDER_ENABLE) + : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, + CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL, + CGU_PLL0_PHASE_DIVIDER_ENABLE); +} + +static unsigned int ltq_get_pll0_fdiv(void) +{ + unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1; + + return (ltq_get_pll0_fosc() + (div >> 1)) / div; +} + +unsigned long ltq_danube_io_region_clock(void) +{ + unsigned int ret = ltq_get_pll0_fosc(); + + switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0x3) { + default: + case 0: + return (ret + 1) / 2; + case 1: + return (ret * 2 + 2) / 5; + case 2: + return (ret + 1) / 3; + case 3: + return (ret + 2) / 4; + } +} + +unsigned long ltq_danube_fpi_bus_clock(int fpi) +{ + unsigned long ret = ltq_danube_io_region_clock(); + + if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL)) + ret >>= 1; + return ret; +} + +unsigned long ltq_danube_fpi_hz(void) +{ + unsigned long ddr_clock = DDR_HZ; + + if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40) + return ddr_clock >> 1; + return ddr_clock; +} + +unsigned long ltq_danube_cpu_hz(void) +{ + switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) { + case 0: + return CLOCK_333M; + case 4: + return DDR_HZ; + case 8: + return DDR_HZ << 1; + default: + return DDR_HZ >> 1; + } +} + +unsigned long ltq_ar9_sys_hz(void) +{ + if (((ltq_cgu_r32(LTQ_CGU_SYS) >> 3) & 0x3) == 0x2) + return CLOCK_393M; + return CLOCK_333M; +} + +unsigned long ltq_ar9_fpi_hz(void) +{ + unsigned long sys = ltq_ar9_sys_hz(); + + if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(0)) + return sys; + return sys >> 1; +} + +unsigned long ltq_ar9_cpu_hz(void) +{ + if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(2)) + return ltq_ar9_fpi_hz(); + else + return ltq_ar9_sys_hz(); +} + +unsigned long ltq_vr9_cpu_hz(void) +{ + unsigned int cpu_sel; + unsigned long clk; + + cpu_sel = (ltq_cgu_r32(LTQ_CGU_SYS_VR9) >> 4) & 0xf; + + switch (cpu_sel) { + case 0: + clk = CLOCK_600M; + break; + case 1: + clk = CLOCK_500M; + break; + case 2: + clk = CLOCK_393M; + break; + case 3: + clk = CLOCK_333M; + break; + case 5: + case 6: + clk = CLOCK_196_608M; + break; + case 7: + clk = CLOCK_167M; + break; + case 4: + case 8: + case 9: + clk = CLOCK_125M; + break; + default: + clk = 0; + break; + } + + return clk; +} + +unsigned long ltq_vr9_fpi_hz(void) +{ + unsigned int ocp_sel, cpu_clk; + unsigned long clk; + + cpu_clk = ltq_vr9_cpu_hz(); + ocp_sel = ltq_cgu_r32(LTQ_CGU_SYS_VR9) & 0x3; + + switch (ocp_sel) { + case 0: + /* OCP ratio 1 */ + clk = cpu_clk; + break; + case 2: + /* OCP ratio 2 */ + clk = cpu_clk / 2; + break; + case 3: + /* OCP ratio 2.5 */ + clk = (cpu_clk * 2) / 5; + break; + case 4: + /* OCP ratio 3 */ + clk = cpu_clk / 3; + break; + default: + clk = 0; + break; + } + + return clk; +} + +unsigned long ltq_vr9_fpi_bus_clock(int fpi) +{ + return ltq_vr9_fpi_hz(); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.c new file mode 100644 index 000000000..56086fa13 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.c @@ -0,0 +1,70 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mtd/physmap.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +#define LTQ_USB_IOMEM_BASE 0x1e101000 +#define LTQ_USB_IOMEM_SIZE 0x00001000 + +static struct resource resources[] = +{ + [0] = { + .name = "dwc_otg_membase", + .start = LTQ_USB_IOMEM_BASE, + .end = LTQ_USB_IOMEM_BASE + LTQ_USB_IOMEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "dwc_otg_irq", + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 dwc_dmamask = (u32)0x1fffffff; + +static struct platform_device platform_dev = { + .name = "dwc_otg", + .dev = { + .dma_mask = &dwc_dmamask, + }, + .resource = resources, + .num_resources = ARRAY_SIZE(resources), +}; + +int __init +xway_register_dwc(int pin) +{ + struct irq_data d; + d.irq = resources[1].start; + ltq_enable_irq(&d); + resources[1].start = ltq_is_ase() ? LTQ_USB_ASE_INT : LTQ_USB_INT; + platform_dev.dev.platform_data = (void*) pin; + return platform_device_register(&platform_dev); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.h new file mode 100644 index 000000000..521fad05e --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.h @@ -0,0 +1,17 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_DEV_DWC_H__ +#define _LTQ_DEV_DWC_H__ + +#include <lantiq_platform.h> + +extern void __init xway_register_dwc(int pin); + +#endif diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.c new file mode 100644 index 000000000..ea08a359f --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.c @@ -0,0 +1,45 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mtd/physmap.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +static u64 dmamask = (u32)0x1fffffff; + +static struct platform_device platform_dev = { + .name = "ifxusb_hcd", + .dev.dma_mask = &dmamask, +}; + +int __init +xway_register_hcd(int *pins) +{ + platform_dev.dev.platform_data = pins; + return platform_device_register(&platform_dev); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.h new file mode 100644 index 000000000..18b3d2dae --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.h @@ -0,0 +1,17 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_DEV_HCD_H__ +#define _LTQ_DEV_HCD_H__ + +#include <lantiq_platform.h> + +extern void __init xway_register_hcd(int *pin); + +#endif diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.c new file mode 100644 index 000000000..a75abe3e0 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.c @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + * Copyright (C) 2011 Andrej VlaÅ¡ić <andrej.vlasic0@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ath5k_platform.h> +#include <linux/ath9k_platform.h> +#include <linux/pci.h> + +#include "dev-wifi-athxk.h" + +extern int (*ltqpci_plat_dev_init)(struct pci_dev *dev); +struct ath5k_platform_data ath5k_pdata; +struct ath9k_platform_data ath9k_pdata = { + .led_pin = -1, + .endian_check = true, +}; + +static int +ath5k_pci_plat_dev_init(struct pci_dev *dev) +{ + dev->dev.platform_data = &ath5k_pdata; + return 0; +} + +static int +ath9k_pci_plat_dev_init(struct pci_dev *dev) +{ + dev->dev.platform_data = &ath9k_pdata; + return 0; +} + +void __init +ltq_register_ath5k(u16 *eeprom_data, u8 *macaddr) +{ + ath5k_pdata.eeprom_data = eeprom_data; + ath5k_pdata.macaddr = macaddr; + ltqpci_plat_dev_init = ath5k_pci_plat_dev_init; +} + +void __init +ltq_register_ath9k(u16 *eeprom_data, u8 *macaddr) +{ + memcpy(ath9k_pdata.eeprom_data, eeprom_data, sizeof(ath9k_pdata.eeprom_data)); + ath9k_pdata.macaddr = macaddr; + ltqpci_plat_dev_init = ath9k_pci_plat_dev_init; +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.h new file mode 100644 index 000000000..5fdb46b61 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + * Copyright (C) 2011 Andrej VlaÅ¡ić <andrej.vlasic0@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _DEV_WIFI_ATHXK_H__ +#define _DEV_WIFI_ATHXK_H__ + +extern void ltq_register_ath5k(u16 *eeprom_data, u8 *macaddr); +extern void ltq_register_ath9k(u16 *eeprom_data, u8 *macaddr); + +#endif diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.c new file mode 100644 index 000000000..8e271f06e --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rt2x00_platform.h> +#include <linux/pci.h> + +#include "dev-wifi-rt2x00.h" + +extern int (*ltqpci_plat_dev_init)(struct pci_dev *dev); +struct rt2x00_platform_data rt2x00_pdata; + +static int +rt2x00_pci_plat_dev_init(struct pci_dev *dev) +{ + dev->dev.platform_data = &rt2x00_pdata; + return 0; +} + +void __init +ltq_register_rt2x00(const char *firmware, const u8 *mac) +{ + rt2x00_pdata.eeprom_file_name = kstrdup(firmware, GFP_KERNEL); + rt2x00_pdata.mac_address = mac; + ltqpci_plat_dev_init = rt2x00_pci_plat_dev_init; +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.h new file mode 100644 index 000000000..941c26535 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _DEV_WIFI_RT2X00_H__ +#define _DEV_WIFI_RT2X00_H__ + +extern void ltq_register_rt2x00(const char *firmware, const u8 *mac); + +#endif diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/gptu.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/gptu.c new file mode 100644 index 000000000..ac82c37eb --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/gptu.c @@ -0,0 +1,176 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <linux/export.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <asm/reboot.h> + +#include <lantiq_soc.h> +#include "../clk.h" + +#include "../devices.h" + +#define ltq_gptu_w32(x, y) ltq_w32((x), ltq_gptu_membase + (y)) +#define ltq_gptu_r32(x) ltq_r32(ltq_gptu_membase + (x)) + + +/* the magic ID byte of the core */ +#define GPTU_MAGIC 0x59 +/* clock control register */ +#define GPTU_CLC 0x00 +/* id register */ +#define GPTU_ID 0x08 +/* interrupt node enable */ +#define GPTU_IRNEN 0xf4 +/* interrupt control register */ +#define GPTU_IRCR 0xf8 +/* interrupt capture register */ +#define GPTU_IRNCR 0xfc +/* there are 3 identical blocks of 2 timers. calculate register offsets */ +#define GPTU_SHIFT(x) (x % 2 ? 4 : 0) +#define GPTU_BASE(x) (((x >> 1) * 0x20) + 0x10) +/* timer control register */ +#define GPTU_CON(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00) +/* timer auto reload register */ +#define GPTU_RUN(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08) +/* timer manual reload register */ +#define GPTU_RLD(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10) +/* timer count register */ +#define GPTU_CNT(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18) + +/* GPTU_CON(x) */ +#define CON_CNT BIT(2) +#define CON_EDGE_FALL BIT(7) +#define CON_SYNC BIT(8) +#define CON_CLK_INT BIT(10) + +/* GPTU_RUN(x) */ +#define RUN_SEN BIT(0) +#define RUN_RL BIT(2) + +/* set clock to runmode */ +#define CLC_RMC BIT(8) +/* bring core out of suspend */ +#define CLC_SUSPEND BIT(4) +/* the disable bit */ +#define CLC_DISABLE BIT(0) + +#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22) + +enum gptu_timer { + TIMER1A = 0, + TIMER1B, + TIMER2A, + TIMER2B, + TIMER3A, + TIMER3B +}; + +static struct resource ltq_gptu_resource = + MEM_RES("GPTU", LTQ_GPTU_BASE_ADDR, LTQ_GPTU_SIZE); + +static void __iomem *ltq_gptu_membase; + +static irqreturn_t timer_irq_handler(int irq, void *priv) +{ + int timer = irq - TIMER_INTERRUPT; + ltq_gptu_w32(1 << timer, GPTU_IRNCR); + return IRQ_HANDLED; +} + +static void gptu_hwinit(void) +{ + struct clk *clk = clk_get_sys("ltq_gptu", NULL); + clk_enable(clk); + ltq_gptu_w32(0x00, GPTU_IRNEN); + ltq_gptu_w32(0xff, GPTU_IRNCR); + ltq_gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC); +} + +static void gptu_hwexit(void) +{ + ltq_gptu_w32(0x00, GPTU_IRNEN); + ltq_gptu_w32(0xff, GPTU_IRNCR); + ltq_gptu_w32(CLC_DISABLE, GPTU_CLC); +} + +static int ltq_gptu_enable(struct clk *clk) +{ + int ret = request_irq(TIMER_INTERRUPT + clk->bits, timer_irq_handler, + IRQF_TIMER, "timer", NULL); + if (ret) { + pr_err("gptu: failed to request irq\n"); + return ret; + } + + ltq_gptu_w32(CON_CNT | CON_EDGE_FALL | CON_SYNC | CON_CLK_INT, + GPTU_CON(clk->bits)); + ltq_gptu_w32(1, GPTU_RLD(clk->bits)); + ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) | clk->bits, GPTU_IRNEN); + ltq_gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits)); + return 0; +} + +static void ltq_gptu_disable(struct clk *clk) +{ + ltq_gptu_w32(0, GPTU_RUN(clk->bits)); + ltq_gptu_w32(0, GPTU_CON(clk->bits)); + ltq_gptu_w32(0, GPTU_RLD(clk->bits)); + ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) & ~clk->bits, GPTU_IRNEN); + free_irq(TIMER_INTERRUPT + clk->bits, NULL); +} + +static inline void clkdev_add_gptu(const char *con, unsigned int timer) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = "ltq_gptu"; + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = ltq_gptu_enable; + clk->disable = ltq_gptu_disable; + clk->bits = timer; + clkdev_add(&clk->cl); +} + +static int __init gptu_setup(void) +{ + /* remap gptu register range */ + ltq_gptu_membase = ltq_remap_resource(<q_gptu_resource); + if (!ltq_gptu_membase) + panic("Failed to remap gptu memory"); + + /* power up the core */ + gptu_hwinit(); + + /* the gptu has a ID register */ + if (((ltq_gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) { + pr_err("gptu: failed to find magic\n"); + gptu_hwexit(); + return -ENAVAIL; + } + + /* register the clocks */ + clkdev_add_gptu("timer1a", TIMER1A); + clkdev_add_gptu("timer1b", TIMER1B); + clkdev_add_gptu("timer2a", TIMER2A); + clkdev_add_gptu("timer2b", TIMER2B); + clkdev_add_gptu("timer3a", TIMER3A); + clkdev_add_gptu("timer3b", TIMER3B); + + pr_info("gptu: 6 timers loaded\n"); + + return 0; +} + +arch_initcall(gptu_setup); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-arv.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-arv.c new file mode 100644 index 000000000..6857e993d --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-arv.c @@ -0,0 +1,793 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/etherdevice.h> +#include <linux/ath5k_platform.h> +#include <linux/ath9k_platform.h> +#include <linux/pci.h> + +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "dev-wifi-rt2x00.h" +#include "dev-wifi-athxk.h" +#include "devices.h" +#include "dev-dwc_otg.h" +#include "pci-ath-fixup.h" + +static struct mtd_partition arv45xx_brnboot_partitions[] = +{ + { + .name = "brn-boot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "config", + .offset = 0x20000, + .size = 0x30000, + }, + { + .name = "linux", + .offset = 0x50000, + .size = 0x390000, + }, + { + .name = "reserved", /* 12-byte signature at 0x3efff4 :/ */ + .offset = 0x3e0000, + .size = 0x010000, + }, + { + .name = "eeprom", + .offset = 0x3f0000, + .size = 0x10000, + }, +}; + +static struct mtd_partition arv75xx_brnboot_partitions[] = +{ + { + .name = "brn-boot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "config", + .offset = 0x20000, + .size = 0x40000, + }, + { + .name = "linux", + .offset = 0x440000, + .size = 0x3a0000, + }, + { + .name = "reserved", /* 12-byte signature at 0x7efff4 :/ */ + .offset = 0x7e0000, + .size = 0x010000, + }, + { + .name = "board_config", + .offset = 0x7f0000, + .size = 0x10000, + }, +}; + +/* + * this is generic configuration for all arv based boards, note that it can be + * rewriten in arv_load_nor() + */ +static struct mtd_partition arv_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "uboot_env", + .offset = 0x20000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x30000, + .size = 0x3c0000, + }, + { + .name = "board_config", + .offset = 0x3f0000, + .size = 0x10000, + }, +}; + +static struct physmap_flash_data arv45xx_brnboot_flash_data = { + .nr_parts = ARRAY_SIZE(arv45xx_brnboot_partitions), + .parts = arv45xx_brnboot_partitions, +}; + +static struct physmap_flash_data arv75xx_brnboot_flash_data = { + .nr_parts = ARRAY_SIZE(arv75xx_brnboot_partitions), + .parts = arv75xx_brnboot_partitions, +}; + +static struct physmap_flash_data arv_flash_data = { + .nr_parts = ARRAY_SIZE(arv_partitions), + .parts = arv_partitions, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_EXT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static struct gpio_led +arv4510pw_gpio_leds[] __initdata = { + { .name = "soc:green:foo", .gpio = 4, .active_low = 1, }, +}; + +static struct gpio_led +arv4518pw_gpio_leds[] __initdata = { + { .name = "soc:green:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:fail", .gpio = 8, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:usb", .gpio = 19, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:voip", .gpio = 100, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs1", .gpio = 101, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs2", .gpio = 102, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" }, +}; + +static struct gpio_keys_button +arv4518pw_gpio_keys[] __initdata = { + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 28, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 30, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 29, + .active_low = 1, + }, +}; + +static struct gpio_led +arv4519pw_gpio_leds[] __initdata = { + { .name = "soc:red:power", .gpio = 7, .active_low = 1, }, + { .name = "soc:green:power", .gpio = 2, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 6, .active_low = 1, }, + { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, }, + { .name = "soc:green:internet", .gpio = 5, .active_low = 1, }, + { .name = "soc:red:internet", .gpio = 8, .active_low = 1, }, + { .name = "soc:green:voip", .gpio = 100, .active_low = 1, }, + { .name = "soc:green:phone1", .gpio = 101, .active_low = 1, }, + { .name = "soc:green:phone2", .gpio = 102, .active_low = 1, }, + { .name = "soc:green:fxo", .gpio = 103, .active_low = 1, }, + { .name = "soc:green:usb", .gpio = 19, .active_low = 1, }, + { .name = "soc:orange:wps", .gpio = 104, .active_low = 1, }, + { .name = "soc:green:wps", .gpio = 105, .active_low = 1, }, + { .name = "soc:red:wps", .gpio = 106, .active_low = 1, }, + +}; + +static struct gpio_keys_button +arv4519pw_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 30, + .active_low = 1, + }, + { + .desc = "wlan", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 28, + .active_low = 1, + }, +}; + +static struct gpio_led +arv4520pw_gpio_leds[] __initdata = { + { .name = "soc:blue:power", .gpio = 3, .active_low = 1, }, + { .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, }, + { .name = "soc:blue:internet", .gpio = 5, .active_low = 1, }, + { .name = "soc:red:power", .gpio = 6, .active_low = 1, }, + { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, }, + { .name = "soc:red:wps", .gpio = 9, .active_low = 1, }, + { .name = "soc:blue:voip", .gpio = 100, .active_low = 1, }, + { .name = "soc:blue:fxs1", .gpio = 101, .active_low = 1, }, + { .name = "soc:blue:fxs2", .gpio = 102, .active_low = 1, }, + { .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, }, + { .name = "soc:blue:voice", .gpio = 104, .active_low = 1, }, + { .name = "soc:blue:usb", .gpio = 105, .active_low = 1, }, + { .name = "soc:blue:wifi", .gpio = 106, .active_low = 1, }, +}; + +static struct gpio_led +arv452cpw_gpio_leds[] __initdata = { + { .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:isdn", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:wps", .gpio = 9, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:fxs1", .gpio = 100, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:fxs2", .gpio = 101, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:wps", .gpio = 102, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:wifi", .gpio = 106, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:internet", .gpio = 108, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:internet", .gpio = 109, .active_low = 1, .default_trigger = "default-on" }, +}; + +static struct gpio_led +arv4525pw_gpio_leds[] __initdata = { + { .name = "soc:green:dsl", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 8, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:online", .gpio = 9, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs-internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs-festnetz", .gpio = 4, .active_low = 1, .default_trigger = "default-on" }, +}; + +#define ARV4525PW_PHYRESET 13 +#define ARV4525PW_RELAY 31 + +static struct gpio +arv4525pw_gpios[] __initdata = { + { ARV4525PW_PHYRESET, GPIOF_OUT_INIT_HIGH, "phyreset" }, + { ARV4525PW_RELAY, GPIOF_OUT_INIT_HIGH, "relay" }, +}; + + +static struct gpio_led +arv752dpw22_gpio_leds[] __initdata = { + { .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:wps", .gpio = 8, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 106, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi1", .gpio = 107, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:wifi", .gpio = 108, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:wifi1", .gpio = 109, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:eth1", .gpio = 111, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:eth2", .gpio = 112, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:eth3", .gpio = 113, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:eth4", .gpio = 114, .active_low = 1, .default_trigger = "default-on", }, +}; + +static struct gpio_keys_button +arv752dpw22_gpio_keys[] __initdata = { + { + .desc = "btn0", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 12, + .active_low = 1, + }, + { + .desc = "btn1", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 13, + .active_low = 1, + }, + { + .desc = "btn2", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 28, + .active_low = 1, + }, +}; + +static struct gpio_led +arv7518pw_gpio_leds[] __initdata = { + { .name = "soc:red:power", .gpio = 7, .active_low = 1, }, + { .name = "soc:green:power", .gpio = 2, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 6, .active_low = 1, }, + { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, }, + { .name = "soc:green:internet", .gpio = 5, .active_low = 1, }, + { .name = "soc:red:internet", .gpio = 8, .active_low = 1, }, + { .name = "soc:green:voip", .gpio = 100, .active_low = 1, }, + { .name = "soc:green:phone1", .gpio = 101, .active_low = 1, }, + { .name = "soc:green:phone2", .gpio = 102, .active_low = 1, }, + { .name = "soc:orange:fail", .gpio = 103, .active_low = 1, }, + { .name = "soc:green:usb", .gpio = 19, .active_low = 1, }, + { .name = "soc:orange:wps", .gpio = 104, .active_low = 1, }, + { .name = "soc:green:wps", .gpio = 105, .active_low = 1, }, + { .name = "soc:red:wps", .gpio = 106, .active_low = 1, }, + +}; + +static struct gpio_keys_button +arv7518pw_gpio_keys[] __initdata = { + /*{ + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 23, + .active_low = 1, + },*/ + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 25, + .active_low = 1, + }, +}; + +static struct gpio_keys_button +arv7525pw_gpio_keys[] __initdata = { + { + .desc = "restart", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 29, + .active_low = 1, + }, +}; + +static void __init +arv_load_nor(unsigned int max) +{ +#define UBOOT_MAGIC 0x27051956 + + int i; + int sector = -1; + + if (ltq_brn_boot) { + if (max == 0x800000) + ltq_register_nor(&arv75xx_brnboot_flash_data); + else + ltq_register_nor(&arv45xx_brnboot_flash_data); + return; + } + + for (i = 1; i < 4 && sector < 0; i++) { + unsigned int uboot_magic; + memcpy_fromio(&uboot_magic, (void *)KSEG1ADDR(LTQ_FLASH_START) + (i * 0x10000), 4); + if (uboot_magic == UBOOT_MAGIC) + sector = i; + } + + if (sector < 0) + return; + + arv_partitions[0].size = arv_partitions[1].offset = (sector - 1) * 0x10000; + arv_partitions[2].offset = arv_partitions[0].size + 0x10000; + arv_partitions[2].size = max - arv_partitions[2].offset - 0x10000; + arv_partitions[3].offset = max - 0x10000; + ltq_register_nor(&arv_flash_data); +} + +static void __init +arv_register_ethernet(unsigned int mac_addr) +{ + memcpy_fromio(<q_eth_data.mac.sa_data, + (void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6); + ltq_register_etop(<q_eth_data); +} + +static u16 arv_ath5k_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS]; +static u16 arv_ath9k_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; +static u8 arv_athxk_eeprom_mac[6]; + +static void __init +arv_register_ath5k(unsigned int ath_addr, unsigned int mac_addr) +{ + int i; + + memcpy_fromio(arv_athxk_eeprom_mac, + (void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6); + arv_athxk_eeprom_mac[5]++; + memcpy_fromio(arv_ath5k_eeprom_data, + (void *)KSEG1ADDR(LTQ_FLASH_START + ath_addr), ATH5K_PLAT_EEP_MAX_WORDS); + // swap eeprom bytes + for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS>>1; i++) { + arv_ath5k_eeprom_data[i] = swab16(arv_ath5k_eeprom_data[i]); + if (i == 0x17e>>1) { + /* + * regdomain is invalid. it's unknown how did original + * fw convered value to 0x82d4 so for now force to 0x67 + */ + arv_ath5k_eeprom_data[i] &= 0x0000; + arv_ath5k_eeprom_data[i] |= 0x67; + } + } +} + +static void __init +arv_register_ath9k(unsigned int ath_addr, unsigned int mac_addr) +{ + int i; + u16 *eepdata, sum, el; + + memcpy_fromio(arv_athxk_eeprom_mac, + (void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6); + arv_athxk_eeprom_mac[5]++; + memcpy_fromio(arv_ath9k_eeprom_data, + (void *)KSEG1ADDR(LTQ_FLASH_START + ath_addr), ATH9K_PLAT_EEP_MAX_WORDS); + + // force regdomain to 0x67 + arv_ath9k_eeprom_data[0x208>>1] = 0x67; + + // calculate new checksum + sum = arv_ath9k_eeprom_data[0x200>>1]; + el = sum / sizeof(u16) - 2; /* skip length and (old) checksum */ + eepdata = (u16 *) (&arv_ath9k_eeprom_data[0x204>>1]); /* after checksum */ + for (i = 0; i < el; i++) + sum ^= *eepdata++; + sum ^= 0xffff; + arv_ath9k_eeprom_data[0x202>>1] = sum; +} + +static void __init +arv3527p_init(void) +{ +#define ARV3527P_MAC_ADDR 0x3f0016 + + ltq_register_gpio_stp(); + // ltq_add_device_gpio_leds(arv3527p_gpio_leds, ARRAY_SIZE(arv3527p_gpio_leds)); + arv_load_nor(0x400000); + arv_register_ethernet(ARV3527P_MAC_ADDR); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV3527P, + "ARV3527P", + "ARV3527P - Arcor Easybox 401", + arv3527p_init); + +static void __init +arv4510pw_init(void) +{ +#define ARV4510PW_MAC_ADDR 0x3f0014 + + ltq_register_gpio_stp(); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4510pw_gpio_leds), arv4510pw_gpio_leds); + arv_load_nor(0x400000); + ltq_pci_data.irq[12] = (INT_NUM_IM2_IRL0 + 31); + ltq_pci_data.irq[15] = (INT_NUM_IM0_IRL0 + 26); + ltq_pci_data.gpio |= PCI_EXIN2 | PCI_REQ2; + ltq_register_pci(<q_pci_data); + arv_register_ethernet(ARV4510PW_MAC_ADDR); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4510PW, + "ARV4510PW", + "ARV4510PW - Wippies Homebox", + arv4510pw_init); + +static void __init +arv4518pw_init(void) +{ +#define ARV4518PW_EBU 0 +#define ARV4518PW_USB 14 +#define ARV4518PW_SWITCH_RESET 13 +#define ARV4518PW_ATH_ADDR 0x3f0400 +#define ARV4518PW_MAC_ADDR 0x3f0016 + + ltq_register_gpio_ebu(ARV4518PW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4518pw_gpio_leds), arv4518pw_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv4518pw_gpio_keys), arv4518pw_gpio_keys); + arv_load_nor(0x400000); + ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ2; + ltq_register_pci(<q_pci_data); + xway_register_dwc(ARV4518PW_USB); + arv_register_ethernet(ARV4518PW_MAC_ADDR); + arv_register_ath5k(ARV4518PW_ATH_ADDR, ARV4518PW_MAC_ADDR); + ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac); + ltq_register_tapi(); + + gpio_request(ARV4518PW_SWITCH_RESET, "switch"); + gpio_direction_output(ARV4518PW_SWITCH_RESET, 1); + gpio_export(ARV4518PW_SWITCH_RESET, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4518PW, + "ARV4518PW", + "ARV4518PW - SMC7908A-ISP, Airties WAV-221", + arv4518pw_init); + +static void __init +arv4519pw_init(void) +{ +#define ARV4519PW_EBU 0 +#define ARV4519PW_USB 14 +#define ARV4519PW_RELAY 31 +#define ARV4519PW_SWITCH_RESET 13 +#define ARV4519PW_ATH_ADDR 0x3f0400 +#define ARV4519PW_MAC_ADDR 0x3f0016 + + arv_load_nor(0x400000); + ltq_register_gpio_ebu(ARV4519PW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4519pw_gpio_leds), arv4519pw_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv4519pw_gpio_keys), arv4519pw_gpio_keys); + ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ1; + ltq_register_pci(<q_pci_data); + xway_register_dwc(ARV4519PW_USB); + arv_register_ethernet(ARV4519PW_MAC_ADDR); + arv_register_ath5k(ARV4519PW_ATH_ADDR, ARV4519PW_MAC_ADDR); + ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac); + ltq_register_tapi(); + + gpio_request(ARV4519PW_RELAY, "relay"); + gpio_direction_output(ARV4519PW_RELAY, 1); + gpio_export(ARV4519PW_RELAY, 0); + + gpio_request(ARV4519PW_SWITCH_RESET, "switch"); + gpio_set_value(ARV4519PW_SWITCH_RESET, 1); + gpio_export(ARV4519PW_SWITCH_RESET, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4519PW, + "ARV4519PW", + "ARV4519PW - Vodafone, Pirelli", + arv4519pw_init); + +static void __init +arv4520pw_init(void) +{ +#define ARV4520PW_EBU 0x400 +#define ARV4520PW_USB 28 +#define ARV4520PW_SWITCH_RESET 110 +#define ARV4520PW_MAC_ADDR 0x3f0016 + + ltq_register_gpio_ebu(ARV4520PW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4520pw_gpio_leds), arv4520pw_gpio_leds); + arv_load_nor(0x400000); + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + arv_register_ethernet(ARV4520PW_MAC_ADDR); + ltq_register_rt2x00(NULL, (const u8 *) ltq_eth_data.mac.sa_data); + xway_register_dwc(ARV4520PW_USB); + ltq_register_tapi(); + + gpio_request(ARV4520PW_SWITCH_RESET, "switch"); + gpio_set_value(ARV4520PW_SWITCH_RESET, 1); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4520PW, + "ARV4520PW", + "ARV4520PW - Airties WAV-281, Arcor A800", + arv4520pw_init); + +static void __init +arv452Cpw_init(void) +{ +#define ARV452CPW_EBU 0x77f +#define ARV452CPW_USB 28 +#define ARV452CPW_RELAY1 31 +#define ARV452CPW_RELAY2 107 +#define ARV452CPW_SWITCH_RESET 110 +#define ARV452CPW_ATH_ADDR 0x3f0400 +#define ARV452CPW_MAC_ADDR 0x3f0016 + + ltq_register_gpio_ebu(ARV452CPW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv452cpw_gpio_leds), arv452cpw_gpio_leds); + arv_load_nor(0x400000); + ltq_register_pci(<q_pci_data); + xway_register_dwc(ARV452CPW_USB); + arv_register_ethernet(ARV452CPW_MAC_ADDR); + arv_register_ath5k(ARV452CPW_ATH_ADDR, ARV452CPW_MAC_ADDR); + ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac); + ltq_register_tapi(); + + gpio_request(ARV452CPW_SWITCH_RESET, "switch"); + gpio_set_value(ARV452CPW_SWITCH_RESET, 1); + gpio_export(ARV452CPW_SWITCH_RESET, 0); + + gpio_request(ARV452CPW_RELAY1, "relay1"); + gpio_direction_output(ARV452CPW_RELAY1, 1); + gpio_export(ARV452CPW_RELAY1, 0); + + gpio_request(ARV452CPW_RELAY2, "relay2"); + gpio_set_value(ARV452CPW_RELAY2, 1); + gpio_export(ARV452CPW_RELAY2, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV452CPW, + "ARV452CPW", + "ARV452CPW - Arcor A801", + arv452Cpw_init); + +static void __init +arv4525pw_init(void) +{ +#define ARV4525PW_ATH_ADDR 0x3f0400 +#define ARV4525PW_MAC_ADDR 0x3f0016 + + arv_load_nor(0x400000); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds); + gpio_request_array(arv4525pw_gpios, ARRAY_SIZE(arv4525pw_gpios)); + gpio_export(ARV4525PW_RELAY, false); + gpio_export(ARV4525PW_PHYRESET, false); + ltq_pci_data.clock = PCI_CLOCK_INT; + ltq_register_pci(<q_pci_data); + arv_register_ath5k(ARV4525PW_ATH_ADDR, ARV4525PW_MAC_ADDR); + ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac); + ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII; + arv_register_ethernet(ARV4525PW_MAC_ADDR); + ltq_register_tapi(); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4525PW, + "ARV4525PW", + "ARV4525PW - Speedport W502V", + arv4525pw_init); + +static void __init +arv7525pw_init(void) +{ +#define ARV7525P_MAC_ADDR 0x3f0016 + + arv_load_nor(0x400000); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv7525pw_gpio_keys), arv7525pw_gpio_keys); + ltq_pci_data.clock = PCI_CLOCK_INT; + ltq_pci_data.gpio = PCI_GNT1 | PCI_EXIN1; + ltq_pci_data.irq[14] = (INT_NUM_IM3_IRL0 + 31); + ltq_register_pci(<q_pci_data); + ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII; + ltq_register_rt2x00("RT2860.eeprom", NULL); + ltq_register_tapi(); + arv_register_ethernet(ARV7525P_MAC_ADDR); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV7525PW, + "ARV7525PW", + "ARV7525PW - Speedport W303V", + arv7525pw_init); + +static void __init +arv7518pw_init(void) +{ +#define ARV7518PW_EBU 0x2 +#define ARV7518PW_USB 14 +#define ARV7518PW_SWITCH_RESET 13 +#define ARV7518PW_ATH_ADDR 0x7f0400 +#define ARV7518PW_MAC_ADDR 0x7f0016 + + arv_load_nor(0x800000); + ltq_register_gpio_ebu(ARV7518PW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv7518pw_gpio_leds), arv7518pw_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv7518pw_gpio_keys), arv7518pw_gpio_keys); + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + xway_register_dwc(ARV7518PW_USB); + arv_register_ethernet(ARV7518PW_MAC_ADDR); + arv_register_ath9k(ARV7518PW_ATH_ADDR, ARV7518PW_MAC_ADDR); + ltq_register_ath9k(arv_ath9k_eeprom_data, arv_athxk_eeprom_mac); + ltq_pci_ath_fixup(14, arv_ath9k_eeprom_data); + ltq_register_tapi(); + + gpio_request(ARV7518PW_SWITCH_RESET, "switch"); + gpio_direction_output(ARV7518PW_SWITCH_RESET, 1); + gpio_export(ARV7518PW_SWITCH_RESET, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV7518PW, + "ARV7518PW", + "ARV7518PW - ASTORIA", + arv7518pw_init); + +static void __init +arv752dpw22_init(void) +{ +#define ARV752DPW22_EBU 0x2 +#define ARV752DPW22_USB 100 +#define ARV752DPW22_RELAY 101 +#define ARV752DPW22_MAC_ADDR 0x7f0016 + + arv_load_nor(0x800000); + ltq_register_gpio_ebu(ARV752DPW22_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv752dpw22_gpio_leds), arv752dpw22_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys); + ltq_pci_data.irq[15] = (INT_NUM_IM3_IRL0 + 31); + ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2; + ltq_register_pci(<q_pci_data); + xway_register_dwc(ARV752DPW22_USB); + arv_register_ethernet(ARV752DPW22_MAC_ADDR); + ltq_register_tapi(); + + gpio_request(ARV752DPW22_RELAY, "relay"); + gpio_set_value(ARV752DPW22_RELAY, 1); + gpio_export(ARV752DPW22_RELAY, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV752DPW22, + "ARV752DPW22", + "ARV752DPW22 - Arcor A803", + arv752dpw22_init); + +static void __init +arv752dpw_init(void) +{ +#define ARV752DPW22_EBU 0x2 +#define ARV752DPW22_USB 100 +#define ARV752DPW22_RELAY 101 +#define ARV752DPW22_MAC_ADDR 0x7f0016 + + arv_load_nor(0x800000); + ltq_register_gpio_ebu(ARV752DPW22_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv752dpw22_gpio_leds), arv752dpw22_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys); + ltq_pci_data.irq[14] = (INT_NUM_IM3_IRL0 + 31); + ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2; + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + xway_register_dwc(ARV752DPW22_USB); + ltq_register_rt2x00("RT2860.eeprom", NULL); + arv_register_ethernet(ARV752DPW22_MAC_ADDR); + gpio_request(ARV752DPW22_RELAY, "relay"); + gpio_set_value(ARV752DPW22_RELAY, 1); + gpio_export(ARV752DPW22_RELAY, 0); + +} + +MIPS_MACHINE(LANTIQ_MACH_ARV752DPW, + "ARV752DPW", + "ARV752DPW - Arcor A802", + arv752dpw_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-bthomehubv2b.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-bthomehubv2b.c new file mode 100644 index 000000000..44fe2f4ef --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-bthomehubv2b.c @@ -0,0 +1,542 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Andrej VlaÅ¡ić + * Copyright (C) 2011 Luka Perkov + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/ath5k_platform.h> +#include <linux/ath9k_platform.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/io.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/module.h> + +#include <irq.h> +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +//#include "dev-wifi-ath9k.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +#undef USE_BTHH_GPIO_INIT + +// this reads certain data from u-boot if it's there +#define USE_UBOOT_ENV_DATA + +#define UBOOT_ENV_OFFSET 0x040000 +#define UBOOT_ENV_SIZE 0x010000 + +#ifdef NAND_ORGLAYOUT +// this is only here for reference +// definition of NAND flash area +static struct mtd_partition bthomehubv2b_nand_partitions[] = +{ + { + .name = "ART", + .offset = 0x0000000, + .size = 0x0004000, + }, + { + .name = "image1", + .offset = 0x0004000, + .size = 0x0E00000, + }, + { + .name = "unknown1", + .offset = 0x0E04000, + .size = 0x00FC000, + }, + { + .name = "image2", + .offset = 0x0F00000, + .size = 0x0E00000, + }, + { + .name = "unknown2", + .offset = 0x1D00000, + .size = 0x0300000, + }, + +}; +#endif + +#ifdef NAND_KEEPOPENRG +// this allows both firmwares to co-exist + +static struct mtd_partition bthomehubv2b_nand_partitions[] = +{ + { + .name = "art", + .offset = 0x0000000, + .size = 0x0004000, + }, + { + .name = "Image1", + .offset = 0x0004000, + .size = 0x0E00000, + }, + { + .name = "linux", + .offset = 0x0E04000, + .size = 0x11fC000, + }, + { + .name = "wholeflash", + .offset = 0x0000000, + .size = 0x2000000, + }, + +}; +#endif + +// this gives more jffs2 by overwriting openrg + +static struct mtd_partition bthomehubv2b_nand_partitions[] = +{ + { + .name = "art", + .offset = 0x0000000, + .size = 0x0004000, + }, + { + .name = "linux", + .offset = 0x0004000, + .size = 0x1ffC000, + }, + { + .name = "wholeflash", + .offset = 0x0000000, + .size = 0x2000000, + }, + +}; + +extern void __init xway_register_nand(struct mtd_partition *parts, int count); + +// end BTHH_USE_NAND + +static struct gpio_led +bthomehubv2b_gpio_leds[] __initdata = { + + { .name = "soc:orange:upgrading", .gpio = 213, }, + { .name = "soc:orange:phone", .gpio = 214, }, + { .name = "soc:blue:phone", .gpio = 215, }, + { .name = "soc:orange:wireless", .gpio = 216, }, + { .name = "soc:blue:wireless", .gpio = 217, }, + { .name = "soc:red:broadband", .gpio = 218, }, + { .name = "soc:orange:broadband", .gpio = 219, }, + { .name = "soc:blue:broadband", .gpio = 220, }, + { .name = "soc:red:power", .gpio = 221, }, + { .name = "soc:orange:power", .gpio = 222, }, + { .name = "soc:blue:power", .gpio = 223, }, +}; + +static struct gpio_keys_button +bthomehubv2b_gpio_keys[] __initdata = { + { + .desc = "restart", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 2, + .active_low = 1, + }, + { + .desc = "findhandset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 15, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 22, + .active_low = 1, + }, +}; + +// definition of NOR flash area - as per original. +static struct mtd_partition bthomehubv2b_partitions[] = +{ + { + .name = "uboot", + .offset = 0x000000, + .size = 0x040000, + }, + { + .name = "uboot_env", + .offset = UBOOT_ENV_OFFSET, + .size = UBOOT_ENV_SIZE, + }, + { + .name = "rg_conf_1", + .offset = 0x050000, + .size = 0x010000, + }, + { + .name = "rg_conf_2", + .offset = 0x060000, + .size = 0x010000, + }, + { + .name = "rg_conf_factory", + .offset = 0x070000, + .size = 0x010000, + }, +}; + + +/* nor flash */ +/* bt homehubv2b has a very small nor flash */ +/* so make it look for a small one, else we get a lot of alias chips identified - */ +/* not a bug problem, but fills the logs. */ +static struct resource bthhv2b_nor_resource = + MEM_RES("nor", LTQ_FLASH_START, 0x80000); + +static struct platform_device ltq_nor = { + .name = "ltq_nor", + .resource = &bthhv2b_nor_resource, + .num_resources = 1, +}; + +static void __init bthhv2b_register_nor(struct physmap_flash_data *data) +{ + ltq_nor.dev.platform_data = data; + platform_device_register(<q_nor); +} + +static struct physmap_flash_data bthomehubv2b_flash_data = { + .nr_parts = ARRAY_SIZE(bthomehubv2b_partitions), + .parts = bthomehubv2b_partitions, +}; + + + + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { [14] = INT_NUM_IM0_IRL0 + 22, }, +}; + + + + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_MII, +}; + + + + +static char __init *get_uboot_env_var(char *haystack, int haystack_len, char *needle, int needle_len) { + int i; + for (i = 0; i <= haystack_len - needle_len; i++) { + if (memcmp(haystack + i, needle, needle_len) == 0) { + return haystack + i + needle_len; + } + } + return NULL; +} + +/* + * bthomehubv2b_parse_hex_* are not uniq. in arm/orion there are also duplicates: + * dns323_parse_hex_* + * TODO: one day write a patch for this :) + */ +static int __init bthomehubv2b_parse_hex_nibble(char n) { + if (n >= '0' && n <= '9') + return n - '0'; + + if (n >= 'A' && n <= 'F') + return n - 'A' + 10; + + if (n >= 'a' && n <= 'f') + return n - 'a' + 10; + + return -1; +} + +static int __init bthomehubv2b_parse_hex_byte(const char *b) { + int hi; + int lo; + + hi = bthomehubv2b_parse_hex_nibble(b[0]); + lo = bthomehubv2b_parse_hex_nibble(b[1]); + + if (hi < 0 || lo < 0) + return -1; + + return (hi << 4) | lo; +} + +static int __init bthomehubv2b_register_ethernet(void) { + u_int8_t addr[6]; + int i; + char *mac = "01:02:03:04:05:06"; + int gotmac = 0; + char *boardid = "BTHHV2B"; + int gotboardid = 0; + + char *uboot_env_page; + uboot_env_page = ioremap(LTQ_FLASH_START + UBOOT_ENV_OFFSET, UBOOT_ENV_SIZE); + if (uboot_env_page) + { + char *Data = NULL; + Data = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0ethaddr=", 9); + if (Data) + { + mac = Data; + } + + Data = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0boardid=", 9); + + if (Data) + boardid = Data; + } + else + { + printk("bthomehubv2b: Failed to get uboot_env_page"); + } + + if (!mac) { + goto error_fail; + } + + if (!boardid) { + goto error_fail; + } + + /* Sanity check the string we're looking at */ + for (i = 0; i < 5; i++) { + if (*(mac + (i * 3) + 2) != ':') { + goto error_fail; + } + } + + for (i = 0; i < 6; i++) { + int byte; + byte = bthomehubv2b_parse_hex_byte(mac + (i * 3)); + if (byte < 0) { + goto error_fail; + } + addr[i] = byte; + } + + if (gotmac) + printk("bthomehubv2b: Found ethernet MAC address: "); + else + printk("bthomehubv2b: using default MAC (pls set ethaddr in u-boot): "); + + for (i = 0; i < 6; i++) + printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); + + memcpy(<q_eth_data.mac.sa_data, addr, 6); + ltq_register_etop(<q_eth_data); + + //memcpy(&bthomehubv2b_ath5k_eeprom_mac, addr, 6); + //bthomehubv2b_ath5k_eeprom_mac[5]++; + + if (gotboardid) + printk("bthomehubv2b: Board id is %s.", boardid); + else + printk("bthomehubv2b: Default Board id is %s.", boardid); + + if (strncmp(boardid, "BTHHV2B", 7) == 0) { + // read in dev-wifi-ath9k + //memcpy(&bthomehubv2b_ath5k_eeprom_data, sx763_eeprom_data, ATH5K_PLAT_EEP_MAX_WORDS); + } + else { + printk("bthomehubv2b: Board id is unknown, fix uboot_env data."); + } + + + // should not unmap while we are using the ram? + if (uboot_env_page) + iounmap(uboot_env_page); + + return 0; + +error_fail: + if (uboot_env_page) + iounmap(uboot_env_page); + return -EINVAL; +} + + +#define PORTA2_HW_PASS1 0 +#define PORTA2_HW_PASS1_SC14480 1 +#define PORTA2_HW_PASS2 2 + +int porta2_hw_revision = -1; +EXPORT_SYMBOL(porta2_hw_revision); + +#define LTQ_GPIO_OUT 0x00 +#define LTQ_GPIO_IN 0x04 +#define LTQ_GPIO_DIR 0x08 +#define LTQ_GPIO_ALTSEL0 0x0C +#define LTQ_GPIO_ALTSEL1 0x10 +#define LTQ_GPIO_OD 0x14 +#define LTQ_GPIO_PUDSEL 0x1C +#define LTQ_GPIO_PUDEN 0x20 + +#ifdef USE_BTHH_GPIO_INIT +static void bthomehubv2b_board_prom_init(void) +{ + int revision = 0; + unsigned int gpio = 0; + void __iomem *mem = ioremap(LTQ_GPIO0_BASE_ADDR, LTQ_GPIO_SIZE*2); + +#define DANUBE_GPIO_P0_OUT (unsigned short *)(mem + LTQ_GPIO_OUT) +#define DANUBE_GPIO_P0_IN (unsigned short *)(mem + LTQ_GPIO_IN) +#define DANUBE_GPIO_P0_DIR (unsigned short *)(mem + LTQ_GPIO_DIR) +#define DANUBE_GPIO_P0_ALTSEL0 (unsigned short *)(mem + LTQ_GPIO_ALTSEL0) +#define DANUBE_GPIO_P0_ALTSEL1 (unsigned short *)(mem + LTQ_GPIO_ALTSEL1) + +#define DANUBE_GPIO_P1_OUT (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_OUT) +#define DANUBE_GPIO_P1_IN (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_IN) +#define DANUBE_GPIO_P1_DIR (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_DIR) +#define DANUBE_GPIO_P1_ALTSEL0 (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_ALTSEL0) +#define DANUBE_GPIO_P1_ALTSEL1 (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_ALTSEL1) +#define DANUBE_GPIO_P1_OD (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_OD) + + printk("About to sense board using GPIOs at %8.8X\n", (unsigned int)mem); + + + /* First detect HW revision of the board. For that we need to set the GPIO + * lines according to table 7.2.1/7.2.2 in HSI */ + *DANUBE_GPIO_P0_OUT = 0x0200; + *DANUBE_GPIO_P0_DIR = 0x2610; + *DANUBE_GPIO_P0_ALTSEL0 = 0x7812; + *DANUBE_GPIO_P0_ALTSEL1 = 0x0000; + + *DANUBE_GPIO_P1_OUT = 0x7008; + *DANUBE_GPIO_P1_DIR = 0xF3AE; + *DANUBE_GPIO_P1_ALTSEL0 = 0x83A7; + *DANUBE_GPIO_P1_ALTSEL1 = 0x0400; + + gpio = (*DANUBE_GPIO_P0_IN & 0xFFFF) | + ((*DANUBE_GPIO_P1_IN & 0xFFFF) << 16); + + revision |= (gpio & (1 << 27)) ? (1 << 0) : 0; + revision |= (gpio & (1 << 20)) ? (1 << 1) : 0; + revision |= (gpio & (1 << 8)) ? (1 << 2) : 0; + revision |= (gpio & (1 << 6)) ? (1 << 3) : 0; + revision |= (gpio & (1 << 5)) ? (1 << 4) : 0; + revision |= (gpio & (1 << 0)) ? (1 << 5) : 0; + + porta2_hw_revision = revision; + printk("PORTA2: detected HW revision %d\n", revision); + + /* Set GPIO lines according to HW revision. */ + /* !!! Note that we are setting SPI_CS5 (GPIO 9) to be GPIO out with value + * of HIGH since the FXO does not use the SPI CS mechanism, it does it + * manually by controlling the GPIO line. We need the CS line to be disabled + * (HIGH) until needed since it will intefere with other devices on the SPI + * bus. */ + *DANUBE_GPIO_P0_OUT = 0x0200; + /* + * During the manufacturing process a different machine takes over uart0 + * so set it as input (so it wouldn't drive the line) + */ +#define cCONFIG_SHC_BT_MFG_TEST 0 + *DANUBE_GPIO_P0_DIR = 0x2671 | (cCONFIG_SHC_BT_MFG_TEST ? 0 : (1 << 12)); + + if (revision == PORTA2_HW_PASS1_SC14480 || revision == PORTA2_HW_PASS2) + *DANUBE_GPIO_P0_ALTSEL0 = 0x7873; + else + *DANUBE_GPIO_P0_ALTSEL0 = 0x3873; + + *DANUBE_GPIO_P0_ALTSEL1 = 0x0001; + + + //################################################################################### + // Register values before patch + // P1_ALTSEL0 = 0x83A7 + // P1_ALTSEL1 = 0x0400 + // P1_OU T = 0x7008 + // P1_DIR = 0xF3AE + // P1_OD = 0xE3Fc + printk("\nApplying Patch for CPU1 IRQ Issue\n"); + *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<12); // switch P1.12 (GPIO28) to GPIO functionality + *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<12); // switch P1.12 (GPIO28) to GPIO functionality + *DANUBE_GPIO_P1_OUT &= ~(1<<12); // set P1.12 (GPIO28) to 0 + *DANUBE_GPIO_P1_DIR |= (1<<12); // configure P1.12 (GPIO28) as output + *DANUBE_GPIO_P1_OD |= (1<<12); // activate Push/Pull mode + udelay(100); // wait a little bit (100us) + *DANUBE_GPIO_P1_OD &= ~(1<<12); // switch back from Push/Pull to Open Drain + // important: before! setting output to 1 (3,3V) the mode must be switched + // back to Open Drain because the reset pin of the SC14488 is internally + // pulled to 1,8V + *DANUBE_GPIO_P1_OUT |= (1<<12); // set output P1.12 (GPIO28) to 1 + // Register values after patch, should be the same as before + // P1_ALTSEL0 = 0x83A7 + // P1_ALTSEL1 = 0x0400 + // P1_OUT = 0x7008 + // P1_DIR = 0xF3AE + // P1_OD = 0xE3Fc + //################################################################################### + + + *DANUBE_GPIO_P1_OUT = 0x7008; + *DANUBE_GPIO_P1_DIR = 0xEBAE | (revision == PORTA2_HW_PASS2 ? 0x1000 : 0); + *DANUBE_GPIO_P1_ALTSEL0 = 0x8BA7; + *DANUBE_GPIO_P1_ALTSEL1 = 0x0400; + + iounmap(mem); +} +#endif +static void __init bthomehubv2b_init(void) { +#define bthomehubv2b_USB 13 + + // read the board version +#ifdef USE_BTHH_GPIO_INIT + bthomehubv2b_board_prom_init(); +#endif + + // register extra GPPOs used by LEDs as GPO 0x200+ + ltq_register_gpio_stp(); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(bthomehubv2b_gpio_leds), bthomehubv2b_gpio_leds); + bthhv2b_register_nor(&bthomehubv2b_flash_data); + xway_register_nand(bthomehubv2b_nand_partitions, ARRAY_SIZE(bthomehubv2b_nand_partitions)); + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(bthomehubv2b_gpio_keys), bthomehubv2b_gpio_keys); +// ltq_register_ath9k(); + xway_register_dwc(bthomehubv2b_USB); + bthomehubv2b_register_ethernet(); + +} + +MIPS_MACHINE(LANTIQ_MACH_BTHOMEHUBV2BOPENRG, + "BTHOMEHUBV2BOPENRG", + "BTHOMEHUBV2B - BT Homehub V2.0 Type B with OpenRG image retained", + bthomehubv2b_init); + +MIPS_MACHINE(LANTIQ_MACH_BTHOMEHUBV2B, + "BTHOMEHUBV2B", + "BTHOMEHUBV2B - BT Homehub V2.0 Type B", + bthomehubv2b_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_ar9.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_ar9.c new file mode 100644 index 000000000..5bd634180 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_ar9.c @@ -0,0 +1,115 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/phy.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/flash.h> + +#include <lantiq_soc.h> +#include <irq.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-ifxhcd.h" +#include "dev-gpio-leds.h" +#include "dev-gpio-buttons.h" + +static struct mtd_partition fritz7320_partitions[] = { + { + .name = "urlader", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "linux", + .offset = 0x20000, + .size = 0xf60000, + }, + { + .name = "tffs (1)", + .offset = 0xf80000, + .size = 0x40000, + }, + { + .name = "tffs (2)", + .offset = 0xfc0000, + .size = 0x40000, + }, +}; + +static struct physmap_flash_data fritz7320_flash_data = { + .nr_parts = ARRAY_SIZE(fritz7320_partitions), + .parts = fritz7320_partitions, +}; + +static struct gpio_led +fritz7320_gpio_leds[] __initdata = { + { .name = "soc:green:power", .gpio = 44, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:internet", .gpio = 47, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:dect", .gpio = 38, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wlan", .gpio = 37, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:dual1", .gpio = 35, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:dual2", .gpio = 45, .active_low = 1, .default_trigger = "default-on" }, +}; + +static struct gpio_keys_button +fritz7320_gpio_keys[] __initdata = { + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 1, + .active_low = 1, + }, + { + .desc = "dect", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 2, + .active_low = 1, + }, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static int usb_pins[2] = { 50, 51 }; + +static void __init +fritz7320_init(void) +{ + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(fritz7320_gpio_keys), fritz7320_gpio_keys); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz7320_gpio_leds), fritz7320_gpio_leds); + ltq_register_pci(<q_pci_data); + ltq_register_etop(<q_eth_data); + ltq_register_nor(&fritz7320_flash_data); + xway_register_hcd(usb_pins); +} + +MIPS_MACHINE(LANTIQ_MACH_FRITZ7320, + "FRITZ7320", + "FRITZ!BOX 7320", + fritz7320_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c new file mode 100644 index 000000000..293c7b750 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c @@ -0,0 +1,164 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/phy.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/flash.h> + +#include <lantiq_soc.h> +#include <irq.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-ifxhcd.h" +#include "dev-gpio-leds.h" +#include "dev-gpio-buttons.h" + +static struct mtd_partition fritz3370_partitions[] = { + { + .name = "linux", + .offset = 0x0, + .size = 0x400000, + }, + { + .name = "filesystem", + .offset = 0x400000, + .size = 0x3000000, + }, + { + .name = "reserved-kernel", + .offset = 0x3400000, + .size = 0x400000, + }, + { + .name = "reserved", + .offset = 0x3800000, + .size = 0x3000000, + }, + { + .name = "config", + .offset = 0x6800000, + .size = 0x200000, + }, + { + .name = "nand-filesystem", + .offset = 0x6a00000, + .size = 0x1600000, + }, +}; + +static struct mtd_partition spi_flash_partitions[] = { + { + .name = "urlader", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "tffs", + .offset = 0x20000, + .size = 0x10000, + }, + { + .name = "tffs", + .offset = 0x30000, + .size = 0x10000, + }, +}; + +static struct gpio_led +fritz3370_gpio_leds[] __initdata = { + { .name = "soc:green:1", .gpio = 32, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:2", .gpio = 33, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:3", .gpio = 34, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:4", .gpio = 35, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:5", .gpio = 36, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:6", .gpio = 47, .active_low = 1, .default_trigger = "default-on" }, +}; + +static struct gpio_keys_button +fritz3370_gpio_keys[] __initdata = { + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 29, + .active_low = 1, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static int usb_pins[2] = { 5, 14 }; + +#define SPI_GPIO_MRST 16 +#define SPI_GPIO_MTSR 17 +#define SPI_GPIO_CLK 18 +#define SPI_GPIO_CS0 10 + +static struct spi_gpio_platform_data spi_gpio_data = { + .sck = SPI_GPIO_CLK, + .mosi = SPI_GPIO_MTSR, + .miso = SPI_GPIO_MRST, + .num_chipselect = 2, +}; + +static struct platform_device spi_gpio_device = { + .name = "spi_gpio", + .dev.platform_data = &spi_gpio_data, +}; + +static struct flash_platform_data spi_flash_data = { + .name = "SPL", + .parts = spi_flash_partitions, + .nr_parts = ARRAY_SIZE(spi_flash_partitions), +}; + +static struct spi_board_info spi_flash __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .chip_select = 0, + .controller_data = (void *) SPI_GPIO_CS0, + .platform_data = &spi_flash_data +}; + +static void __init +spi_gpio_init(void) +{ + spi_register_board_info(&spi_flash, 1); + platform_device_register(&spi_gpio_device); +} + +static void __init +fritz3370_init(void) +{ + spi_gpio_init(); + platform_device_register_simple("pcie-xway", 0, NULL, 0); + xway_register_nand(fritz3370_partitions, ARRAY_SIZE(fritz3370_partitions)); + xway_register_hcd(usb_pins); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz3370_gpio_leds), fritz3370_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(fritz3370_gpio_keys), fritz3370_gpio_keys); + ltq_register_vrx200(<q_eth_data); +} + +MIPS_MACHINE(LANTIQ_MACH_FRITZ3370, + "FRITZ3370", + "FRITZ!BOX 3370", + fritz3370_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.c new file mode 100644 index 000000000..af27825cb --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.c @@ -0,0 +1,168 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Andrej VlaÅ¡ić + * Copyright (C) 2011 Luka Perkov + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/io.h> +#include <linux/if_ether.h> +#include <linux/etherdevice.h> +#include <linux/string.h> + +#include <irq.h> +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "dev-wifi-athxk.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +#include "mach-gigasx76x.h" + +static u8 ltq_ethaddr[6] = { 0 }; + +static int __init +setup_ethaddr(char *str) +{ + if (!mac_pton(str, ltq_ethaddr)) + memset(ltq_ethaddr, 0, 6); + return 0; +} +__setup("ethaddr=", setup_ethaddr); + + +enum { + UNKNOWN = 0, + SX761, + SX762, + SX763, +}; +static u8 board __initdata = SX763; + +static int __init +setup_board(char *str) +{ + if (!strcmp(str, "sx761")) + board = SX761; + else if (!strcmp(str, "sx762")) + board = SX762; + else if (!strcmp(str, "sx763")) + board = SX763; + else + board = UNKNOWN; + return 0; +} +__setup("board=", setup_board); + +static struct mtd_partition gigasx76x_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x10000, + }, + { + .name = "uboot_env", + .offset = 0x10000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x20000, + .size = 0x7e0000, + }, +}; + +static struct gpio_led +gigasx76x_gpio_leds[] __initdata = { + { .name = "soc:green:voip", .gpio = 216, }, + { .name = "soc:green:adsl", .gpio = 217, }, + { .name = "soc:green:usb", .gpio = 218, }, + { .name = "soc:green:wifi", .gpio = 219, }, + { .name = "soc:green:phone2", .gpio = 220, }, + { .name = "soc:green:phone1", .gpio = 221, }, + { .name = "soc:green:line", .gpio = 222, }, + { .name = "soc:green:online", .gpio = 223, }, +}; + +static struct gpio_keys_button +gigasx76x_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 22, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 14, + .active_low = 0, + }, +}; + +static struct physmap_flash_data gigasx76x_flash_data = { + .nr_parts = ARRAY_SIZE(gigasx76x_partitions), + .parts = gigasx76x_partitions, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { [14] = INT_NUM_IM0_IRL0 + 22, }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_MII, +}; + +static void __init +gigasx76x_init(void) +{ +#define GIGASX76X_USB 29 + + ltq_register_gpio_stp(); + ltq_register_nor(&gigasx76x_flash_data); + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(gigasx76x_gpio_leds), gigasx76x_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(gigasx76x_gpio_keys), gigasx76x_gpio_keys); + xway_register_dwc(GIGASX76X_USB); + + if (!is_valid_ether_addr(ltq_ethaddr)) + random_ether_addr(ltq_ethaddr); + + memcpy(<q_eth_data.mac.sa_data, ltq_ethaddr, 6); + ltq_register_etop(<q_eth_data); + if (board == SX762) + ltq_register_ath5k(sx762_eeprom_data, ltq_ethaddr); + else + ltq_register_ath5k(sx763_eeprom_data, ltq_ethaddr); +} + +MIPS_MACHINE(LANTIQ_MACH_GIGASX76X, + "GIGASX76X", + "GIGASX76X - Gigaset SX761,SX762,SX763", + gigasx76x_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.h new file mode 100644 index 000000000..74e5ba28f --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.h @@ -0,0 +1,210 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Andrej VlaÅ¡ić + * Copyright (C) 2011 Luka Perkov + * + */ + +#ifndef _MACH_GIGASX76X_H__ +#define _MACH_GIGASX76X_H__ + +#include <linux/ath5k_platform.h> + +static u16 sx763_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS] = +{ +0x0013,0x168c,0x0200,0x0001,0x0000,0x5001,0x0000,0x2051,0x2051,0x1c0a,0x0100, +0x0000,0x01c2,0x0002,0xc606,0x0001,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xf165,0x7fbe,0x0003,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x5aa5,0x0000,0x0000,0x0313,0x4943, +0x2053,0x7104,0x1202,0x0400,0x0306,0x0001,0x0000,0x0500,0x410e,0x39b1,0x1eb5, +0x4e2d,0x3056,0xffff,0xe902,0x0700,0x0106,0x0000,0x0100,0x1500,0x0752,0x4101, +0x6874,0x7265,0x736f,0x4320,0x6d6f,0x756d,0x696e,0x6163,0x6974,0x6e6f,0x2c73, +0x4920,0x636e,0x002e,0x5241,0x3035,0x3130,0x302d,0x3030,0x2d30,0x3030,0x3030, +0x5700,0x7269,0x6c65,0x7365,0x2073,0x414c,0x204e,0x6552,0x6566,0x6572,0x636e, +0x2065,0x6143,0x6472,0x3000,0x0030,0x00ff,0x2100,0x0602,0x2201,0x0205,0x8d80, +0x005b,0x0522,0x4002,0x8954,0x2200,0x0205,0x1b00,0x00b7,0x0522,0x8002,0x12a8, +0x2201,0x0205,0x3600,0x016e,0x0522,0x0002,0x2551,0x2202,0x0205,0x6c00,0x02dc, +0x0522,0x8002,0x37f9,0x2203,0x0205,0xa200,0x044a,0x0222,0x0803,0x0822,0x0604, +0x0300,0xbe7f,0x65f1,0x0222,0x0105,0x00ff,0x0000,0x0000,0x0000,0x0000,0x0000, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0x0037,0x971f,0x5003,0x9a66,0x0001,0x81c4,0x016a, +0x02ff,0x84ff,0x15a3,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x2d2c,0x0000,0x0000,0x0000,0x0000,0xe028,0xa492,0x1c00, +0x000e,0xb8ca,0x0013,0x0000,0x0000,0x6b4b,0xc059,0x1571,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x2370,0x00a5,0x9618,0x419a,0x68a2,0xda35,0x001c,0x0007,0xb0ff,0x01b5,0x0000, +0x0000,0xff70,0x19ff,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x3170,0x00a5,0x9618,0x419a,0x68a2,0xda35, +0x001c,0x000e,0xb0ff,0x21b5,0x0000,0x2fd8,0xff70,0x1226,0x19ff,0x07be,0x6201, +0x032e,0x0587,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x1112, +0x1441,0x4231,0x3234,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,0x0000,0x0000,0x0000,0x8000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x4d31,0x7f54,0x3c93,0x1205,0x1931, +0x492d,0x7f50,0x3c93,0x0e01,0x192d,0x0070,0x0000,0x8140,0x724b,0x2ba9,0x3a09, +0x99d9,0x1949,0x0070,0x0000,0x80e0,0x624a,0x2af8,0x35c7,0x9d47,0x1938,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x7082,0x0820,0xb882,0x0820,0x7092,0x28a0,0x8992, +0x28a0,0xa292,0x28a0,0x70a2,0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000, +0x70a2,0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,0x8989,0x0000,0x0000, +0x0000,0x2424,0x0000,0x0000,0x0000,0x7075,0xa2ac,0xb800,0x0000,0x2464,0x2424, +0x2400,0x0000,0x7075,0xa2ac,0x0000,0x0000,0x2464,0x2424,0x0000,0x0000,0x7075, +0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,0x7075,0xa7ac,0x0000,0x0000, +0x2464,0x6424,0x0000,0x0000,0x8989,0x0000,0x0000,0x0000,0x2424,0x0000,0x0000, +0x0000,0x0000,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff}; + +static u16 sx762_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS] = +{ +0x001a,0x168c,0x0200,0x0001,0x0000,0x5001,0x0000,0x2051,0x2051,0x1c0a,0x0100, +0x0000,0x01c2,0x0002,0xc606,0x0001,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xf165,0x7fbe,0x0003,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x5aa5,0x0000,0x0000,0x0313,0x4943, +0x2053,0x7104,0x1202,0x0400,0x0306,0x0001,0x0000,0x0500,0x410e,0x39b1,0x1eb5, +0x4e2d,0x3056,0xffff,0xe902,0x0700,0x0106,0x0000,0x0100,0x1500,0x0752,0x4101, +0x6874,0x7265,0x736f,0x4320,0x6d6f,0x756d,0x696e,0x6163,0x6974,0x6e6f,0x2c73, +0x4920,0x636e,0x002e,0x5241,0x3035,0x3130,0x302d,0x3030,0x2d30,0x3030,0x3030, +0x5700,0x7269,0x6c65,0x7365,0x2073,0x414c,0x204e,0x6552,0x6566,0x6572,0x636e, +0x2065,0x6143,0x6472,0x3000,0x0030,0x00ff,0x2100,0x0602,0x2201,0x0205,0x8d80, +0x005b,0x0522,0x4002,0x8954,0x2200,0x0205,0x1b00,0x00b7,0x0522,0x8002,0x12a8, +0x2201,0x0205,0x3600,0x016e,0x0522,0x0002,0x2551,0x2202,0x0205,0x6c00,0x02dc, +0x0522,0x8002,0x37f9,0x2203,0x0205,0xa200,0x044a,0x0222,0x0803,0x0822,0x0604, +0x0300,0xbe7f,0x65f1,0x0222,0x0105,0x00ff,0x0000,0x0000,0x0000,0x0000,0x0000, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0x0037,0x6aaa,0x5003,0x9a66,0x0001,0x81c4,0x016a, +0x02ff,0x84ff,0x15a3,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x2d2c,0x0000,0x0000,0x0000,0x0000,0xe028,0xa492,0x1c00, +0x000e,0xb8ca,0x0013,0x0000,0x0000,0x6b4b,0xc059,0x1571,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x2370,0x00a5,0x9618,0x419a,0x68a2,0xda35,0x001c,0x0007,0xb0ff,0x01b5,0x0000, +0x0000,0xff70,0x19ff,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x3170,0x00a5,0x9618,0x419a,0x68a2,0xda35, +0x001c,0x000e,0xb0ff,0x21b5,0x0000,0x2fd8,0xff70,0x1226,0x19ff,0x07fa,0x6201, +0x032e,0x0587,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x1112, +0x1441,0x4231,0x3234,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,0x0000,0x0000,0x0000,0x8000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x4d31,0x7f54,0x3c93,0x1205,0x1931, +0x492d,0x7f50,0x3c93,0x0e01,0x192d,0x0070,0x0000,0x8180,0x724d,0xab59,0x3a08, +0xdd79,0x2559,0x0070,0x0000,0x81a0,0x6e4d,0x2b99,0x3a09,0x9989,0x2157,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x7092,0x4924,0xb892,0x4924,0x7092,0x289e,0x8992, +0x289e,0xa292,0x289e,0x70a2,0xa7ac,0x0000,0x0000,0x2462,0x5e13,0x0000,0x0000, +0x70a2,0xa7ac,0x0000,0x0000,0x1e5c,0x5713,0x0000,0x0000,0x8989,0x0000,0x0000, +0x0000,0x2424,0x0000,0x0000,0x0000,0x7075,0xa2ac,0xb800,0x0000,0x2868,0x2828, +0x2800,0x0000,0x7075,0xa2ac,0x0000,0x0000,0x2868,0x2828,0x0000,0x0000,0x7075, +0xac00,0x0000,0x0000,0x2161,0x2100,0x0000,0x0000,0x7075,0xac00,0x0000,0x0000, +0x1b5b,0x1b00,0x0000,0x0000,0x8989,0x0000,0x0000,0x0000,0x2121,0x0000,0x0000, +0x0000,0x0000,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff}; + +#endif diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-h201l.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-h201l.c new file mode 100644 index 000000000..86101f588 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-h201l.c @@ -0,0 +1,100 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 Luka Perkov <openwrt@lukaperkov.net> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/if_ether.h> +#include <linux/etherdevice.h> +#include <linux/string.h> + +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +static u8 ltq_ethaddr[6] = { 0 }; + +static int __init +setup_ethaddr(char *str) +{ + if (!mac_pton(str, ltq_ethaddr)) + memset(ltq_ethaddr, 0, 6); + return 0; +} +__setup("ethaddr=", setup_ethaddr); + +static struct mtd_partition h201l_partitions[] __initdata = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "uboot_env", + .offset = 0x20000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x30000, + .size = 0x7d0000, + }, +}; + +static struct physmap_flash_data h201l_flash_data __initdata = { + .nr_parts = ARRAY_SIZE(h201l_partitions), + .parts = h201l_partitions, +}; + +static struct gpio_led +h201l_leds_gpio[] __initdata = { +}; + +static struct gpio_keys_button +h201l_gpio_keys[] __initdata = { +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static void __init +h201l_init(void) +{ + ltq_register_gpio_stp(); + ltq_register_nor(&h201l_flash_data); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(h201l_leds_gpio), h201l_leds_gpio); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(h201l_gpio_keys), h201l_gpio_keys); + + if (!is_valid_ether_addr(ltq_ethaddr)) + random_ether_addr(ltq_ethaddr); + + memcpy(<q_eth_data.mac.sa_data, ltq_ethaddr, 6); + ltq_register_etop(<q_eth_data); + + xway_register_dwc(-1); +} + +MIPS_MACHINE(LANTIQ_MACH_H201L, + "H201L", + "ZTE ZXV10 H201L", + h201l_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-netgear.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-netgear.c new file mode 100644 index 000000000..29b072810 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-netgear.c @@ -0,0 +1,239 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + * Copyright (C) 2012 Pieter Voorthuijsen <p.voorthuijsen@gmail.com> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/phy.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi_gpio.h> +#include <linux/ath9k_platform.h> +#include <linux/if_ether.h> +#include <linux/etherdevice.h> +#include <linux/kobject.h> +#include <linux/sysfs.h> + +#include <lantiq_soc.h> +#include <irq.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> +#include "dev-wifi-athxk.h" + +#include "../machtypes.h" +#include "devices.h" +#include "dev-dwc_otg.h" +#include "pci-ath-fixup.h" +#include <mtd/mtd-abi.h> +#include <asm-generic/sizes.h> + +static struct mtd_partition dgn3500_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x10000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "environment", + .offset = 0x10000, + .size = 0x10000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "calibration", + .offset = 0x20000, + .size = 0x10000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "linux", + .offset = 0x50000, + .size = 0xfa0000, + }, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_MII, +}; + +static struct gpio_led +dgn3500_gpio_leds[] __initdata = { + { .name = "soc:green:power", .gpio = 34, .active_low = 1, }, + { .name = "soc:red:power", .gpio = 39, .active_low = 1, }, + { .name = "soc:orange:wlan", .gpio = 51, .active_low = 1, }, + { .name = "soc:green:wps", .gpio = 52, .active_low = 1, }, + { .name = "soc:green:usb", .gpio = 22, .active_low = 1, }, + { .name = "soc:green:dsl", .gpio = 4, .active_low = 1, }, + { .name = "soc:green:internet", .gpio = 2, .active_low = 1, }, +}; + +static struct gpio_keys_button +dgn3500_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 54, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 36, + .active_low = 1, + }, +}; + +#define SPI_GPIO_MRST 16 +#define SPI_GPIO_MTSR 17 +#define SPI_GPIO_CLK 18 +#define SPI_GPIO_CS0 10 + +static struct spi_gpio_platform_data spi_gpio_data = { + .sck = SPI_GPIO_CLK, + .mosi = SPI_GPIO_MTSR, + .miso = SPI_GPIO_MRST, + .num_chipselect = 2, +}; + +static struct platform_device spi_gpio_device = { + .name = "spi_gpio", + .dev.platform_data = &spi_gpio_data, +}; + +static struct flash_platform_data spi_flash_data = { + .name = "sflash", + .parts = dgn3500_partitions, + .nr_parts = ARRAY_SIZE(dgn3500_partitions), +}; + +static struct spi_board_info spi_flash __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .chip_select = 0, + .controller_data = (void *) SPI_GPIO_CS0, + .platform_data = &spi_flash_data +}; + +static u8 ltq_ethaddr[6] = { 0 }; + +static int __init setup_ethaddr(char *str) +{ + if (!mac_pton(str, ltq_ethaddr)) + memset(ltq_ethaddr, 0, 6); + return 0; +} +__setup("ethaddr=", setup_ethaddr); + +static u16 dgn3500_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS] = {0}; + +static ssize_t ath_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t offset, size_t count) +{ + if (unlikely(offset >= sizeof(dgn3500_eeprom_data))) + return 0; + if ((offset + count) > sizeof(dgn3500_eeprom_data)) + count = sizeof(dgn3500_eeprom_data) - offset; + if (unlikely(!count)) + return count; + + memcpy(buf, (char *)(dgn3500_eeprom_data) + offset, count); + + return count; +} + +extern struct ath9k_platform_data ath9k_pdata; + +static ssize_t ath_eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t offset, size_t count) +{ + int i; + char *eeprom_bytes = (char *)dgn3500_eeprom_data; + + if (unlikely(offset >= sizeof(dgn3500_eeprom_data))) + return -EFBIG; + if ((offset + count) > sizeof(dgn3500_eeprom_data)) + count = sizeof(dgn3500_eeprom_data) - offset; + if (unlikely(!count)) + return count; + if (count % 2) + return 0; + + /* The PCI fixup routine requires an endian swap of the calibartion data + * stored in flash */ + for (i = 0; i < count; i += 2) { + eeprom_bytes[offset + i + 1] = buf[i]; + eeprom_bytes[offset + i] = buf[i+1]; + } + + /* The original data does not contain a checksum. Set the country and + * calculate new checksum when all data is received */ + if ((count + offset) == sizeof(dgn3500_eeprom_data)) + memcpy(ath9k_pdata.eeprom_data, dgn3500_eeprom_data, + sizeof(ath9k_pdata.eeprom_data)); + + return count; +} + +static struct bin_attribute dev_attr_ath_eeprom = { + .attr = { + .name = "ath_eeprom", + .mode = S_IRUGO|S_IWUSR, + }, + .read = ath_eeprom_read, + .write = ath_eeprom_write, +}; + +static void __init dgn3500_init(void) +{ + if (sysfs_create_bin_file(firmware_kobj, &dev_attr_ath_eeprom)) + printk(KERN_INFO "Failed to create ath eeprom sysfs entry\n"); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(dgn3500_gpio_leds), + dgn3500_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dgn3500_gpio_keys), dgn3500_gpio_keys); + platform_device_register(&spi_gpio_device); + ltq_register_pci(<q_pci_data); + spi_register_board_info(&spi_flash, 1); + if (!is_valid_ether_addr(ltq_ethaddr)) { + printk(KERN_INFO "MAC invalid using random\n"); + random_ether_addr(ltq_ethaddr); + } + memcpy(<q_eth_data.mac.sa_data, ltq_ethaddr, 6); + ltq_register_etop(<q_eth_data); + ltq_register_ath9k(dgn3500_eeprom_data, ltq_ethaddr); + ltq_pci_ath_fixup(14, dgn3500_eeprom_data); + /* The usb power is always enabled, protected by a fuse */ + xway_register_dwc(-1); +} + +MIPS_MACHINE(LANTIQ_MACH_DGN3500B, + "DGN3500B", + "Netgear DGN3500B", + dgn3500_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-p2601hnfx.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-p2601hnfx.c new file mode 100644 index 000000000..247dfb572 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-p2601hnfx.c @@ -0,0 +1,113 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/etherdevice.h> +#include <linux/mdio-gpio.h> +#include <linux/kernel.h> +#include <linux/delay.h> + +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +static struct mtd_partition p2601hnfx_partitions[] __initdata = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "uboot_env", + .offset = 0x20000, + .size = 0x20000, + }, + { + .name = "linux", + .offset = 0x40000, + .size = 0xfc0000, + }, +}; + +static struct physmap_flash_data p2601hnfx_flash_data __initdata = { + .nr_parts = ARRAY_SIZE(p2601hnfx_partitions), + .parts = p2601hnfx_partitions, +}; + +static struct gpio_led +p2601hnfx_leds_gpio[] __initdata = { + { .name = "soc:yellow:phone", .gpio = 216, .active_low = 1 }, + { .name = "soc:green:phone", .gpio = 217, .active_low = 1 }, + { .name = "soc:yellow:wifi", .gpio = 218, .active_low = 1 }, + { .name = "soc:green:power", .gpio = 219, .active_low = 1 }, + { .name = "soc:red:internet", .gpio = 220, .active_low = 1 }, + { .name = "soc:green:internet", .gpio = 221, .active_low = 1 }, + { .name = "soc:green:dsl", .gpio = 222, .active_low = 1 }, + { .name = "soc:green:wifi", .gpio = 223, .active_low = 1 }, +}; + +static struct gpio_keys_button +p2601hnfx_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 53, + .active_low = 1, + }, + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 54, + .active_low = 1, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static void __init +p2601hnfx_init(void) +{ +#define P2601HNFX_USB 9 + + ltq_register_gpio_stp(); + ltq_register_nor(&p2601hnfx_flash_data); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(p2601hnfx_leds_gpio), p2601hnfx_leds_gpio); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(p2601hnfx_gpio_keys), p2601hnfx_gpio_keys); + ltq_register_etop(<q_eth_data); + xway_register_dwc(P2601HNFX_USB); + + // enable the ethernet ports on the SoC +// ltq_w32((ltq_r32(LTQ_GPORT_P0_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P0_CTL); +// ltq_w32((ltq_r32(LTQ_GPORT_P1_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P1_CTL); +// ltq_w32((ltq_r32(LTQ_GPORT_P2_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P2_CTL); +} + +MIPS_MACHINE(LANTIQ_MACH_P2601HNFX, + "P2601HNFX", + "ZyXEL P-2601HN-Fx", + p2601hnfx_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-wbmr.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-wbmr.c new file mode 100644 index 000000000..a57e09212 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-wbmr.c @@ -0,0 +1,120 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> + +#include <lantiq_soc.h> +#include <irq.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +static struct mtd_partition wbmr_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot-env", + .offset = 0x40000, + .size = 0x20000, + }, + { + .name = "linux", + .offset = 0x60000, + .size = 0x1f20000, + }, + { + .name = "calibration", + .offset = 0x1fe0000, + .size = 0x20000, + }, +}; + +static struct physmap_flash_data wbmr_flash_data = { + .nr_parts = ARRAY_SIZE(wbmr_partitions), + .parts = wbmr_partitions, +}; + +static struct gpio_led +wbmr_gpio_leds[] __initdata = { + { .name = "soc:blue:movie", .gpio = 20, .active_low = 1, }, + { .name = "soc:red:internet", .gpio = 18, .active_low = 1, }, + { .name = "soc:green:internet", .gpio = 17, .active_low = 1, }, + { .name = "soc:green:adsl", .gpio = 16, .active_low = 1, }, + { .name = "soc:green:wlan", .gpio = 15, .active_low = 1, }, + { .name = "soc:red:security", .gpio = 14, .active_low = 1, }, + { .name = "soc:green:power", .gpio = 1, .active_low = 1, }, + { .name = "soc:red:power", .gpio = 5, .active_low = 1, }, + { .name = "soc:green:usb", .gpio = 28, .active_low = 1, }, +}; + +static struct gpio_keys_button +wbmr_gpio_keys[] __initdata = { + { + .desc = "aoss", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 0, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 37, + .active_low = 1, + }, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RGMII, +}; + +static void __init +wbmr_init(void) +{ +#define WMBR_BRN_MAC 0x1fd0024 + + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(wbmr_gpio_leds), wbmr_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(wbmr_gpio_keys), wbmr_gpio_keys); + ltq_register_nor(&wbmr_flash_data); + ltq_register_pci(<q_pci_data); + memcpy_fromio(<q_eth_data.mac.sa_data, + (void *)KSEG1ADDR(LTQ_FLASH_START + WMBR_BRN_MAC), 6); + ltq_register_etop(<q_eth_data); + xway_register_dwc(36); +} + +MIPS_MACHINE(LANTIQ_MACH_WBMR, + "WBMR", + "WBMR", + wbmr_init); diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/nand.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/nand.c new file mode 100644 index 000000000..9ab91d881 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/nand.c @@ -0,0 +1,216 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +#include "devices.h" + +/* nand registers */ +#define LTQ_EBU_NAND_WAIT 0xB4 +#define LTQ_EBU_NAND_ECC0 0xB8 +#define LTQ_EBU_NAND_ECC_AC 0xBC +#define LTQ_EBU_NAND_CON 0xB0 +#define LTQ_EBU_ADDSEL1 0x24 + +/* gpio definitions */ +#define PIN_ALE 13 +#define PIN_CLE 24 +#define PIN_CS1 23 +#define PIN_RDY 48 /* NFLASH_READY */ +#define PIN_RD 49 /* NFLASH_READ_N */ + +#define NAND_CMD_ALE (1 << 2) +#define NAND_CMD_CLE (1 << 3) +#define NAND_CMD_CS (1 << 4) +#define NAND_WRITE_CMD_RESET 0xff +#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE) +#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE) +#define NAND_WRITE_DATA (NAND_CMD_CS) +#define NAND_READ_DATA (NAND_CMD_CS) +#define NAND_WAIT_WR_C (1 << 3) +#define NAND_WAIT_RD (0x1) + +#define ADDSEL1_MASK(x) (x << 4) +#define ADDSEL1_REGEN 1 +#define BUSCON1_SETUP (1 << 22) +#define BUSCON1_BCGEN_RES (0x3 << 12) +#define BUSCON1_WAITWRC2 (2 << 8) +#define BUSCON1_WAITRDC2 (2 << 6) +#define BUSCON1_HOLDC1 (1 << 4) +#define BUSCON1_RECOVC1 (1 << 2) +#define BUSCON1_CMULT4 1 +#define NAND_CON_NANDM 1 +#define NAND_CON_CSMUX (1 << 1) +#define NAND_CON_CS_P (1 << 4) +#define NAND_CON_SE_P (1 << 5) +#define NAND_CON_WP_P (1 << 6) +#define NAND_CON_PRE_P (1 << 7) +#define NAND_CON_IN_CS0 0 +#define NAND_CON_OUT_CS0 0 +#define NAND_CON_IN_CS1 (1 << 8) +#define NAND_CON_OUT_CS1 (1 << 10) +#define NAND_CON_CE (1 << 20) + +#define NAND_BASE_ADDRESS (KSEG1 | 0x14000000) + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static void xway_select_chip(struct mtd_info *mtd, int chip) +{ + switch (chip) { + case -1: + ltq_ebu_w32_mask(NAND_CON_CE, 0, LTQ_EBU_NAND_CON); + ltq_ebu_w32_mask(NAND_CON_NANDM, 0, LTQ_EBU_NAND_CON); + break; + case 0: + ltq_ebu_w32_mask(0, NAND_CON_NANDM, LTQ_EBU_NAND_CON); + ltq_ebu_w32_mask(0, NAND_CON_CE, LTQ_EBU_NAND_CON); + /* reset the nand chip */ + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + ltq_w32(NAND_WRITE_CMD_RESET, + ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD))); + break; + default: + BUG(); + } +} + +static void xway_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + this->IO_ADDR_W = (void __iomem *) + (NAND_BASE_ADDRESS | NAND_WRITE_CMD); + else if (ctrl & NAND_ALE) + this->IO_ADDR_W = (void __iomem *) + (NAND_BASE_ADDRESS | NAND_WRITE_ADDR); + } + + if (data != NAND_CMD_NONE) { + *(volatile u8*) ((u32) this->IO_ADDR_W) = data; + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + } +} + +static int xway_dev_ready(struct mtd_info *mtd) +{ + return ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_RD; +} + +void nand_write(unsigned int addr, unsigned int val) +{ + ltq_w32(val, ((u32 *) (NAND_BASE_ADDRESS | addr))); + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; +} + +unsigned char xway_read_byte(struct mtd_info *mtd) +{ + return ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA))); +} + +static void xway_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + { + unsigned char res8 = ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA))); + buf[i] = res8; + } +} + +static void xway_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + { + ltq_w8(buf[i], ((u32*)(NAND_BASE_ADDRESS | (NAND_WRITE_DATA)))); + while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0); + } +} + +int xway_probe(struct platform_device *pdev) +{ + /* might need this later ? + ltq_gpio_request(PIN_CS1, 2, 1, "NAND_CS1"); + */ + ltq_gpio_request(&pdev->dev, PIN_CLE, 2, 1, "NAND_CLE"); + ltq_gpio_request(&pdev->dev, PIN_ALE, 2, 1, "NAND_ALE"); + if (ltq_is_ar9() || ltq_is_vr9()) { + ltq_gpio_request(&pdev->dev, PIN_RDY, 2, 0, "NAND_BSY"); + ltq_gpio_request(&pdev->dev, PIN_RD, 2, 1, "NAND_RD"); + } + + ltq_ebu_w32((NAND_BASE_ADDRESS & 0x1fffff00) + | ADDSEL1_MASK(3) | ADDSEL1_REGEN, LTQ_EBU_ADDSEL1); + + ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2 + | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1 + | BUSCON1_CMULT4, LTQ_EBU_BUSCON1); + + ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P + | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P + | NAND_CON_IN_CS0 | NAND_CON_OUT_CS0, LTQ_EBU_NAND_CON); + + ltq_w32(NAND_WRITE_CMD_RESET, + ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD))); + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + + return 0; +} + +static struct platform_nand_data falcon_flash_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 30, + .part_probe_types = part_probes, + }, + .ctrl = { + .probe = xway_probe, + .cmd_ctrl = xway_cmd_ctrl, + .dev_ready = xway_dev_ready, + .select_chip = xway_select_chip, + .read_byte = xway_read_byte, + .read_buf = xway_read_buf, + .write_buf = xway_write_buf, + } +}; + +static struct resource ltq_nand_res = + MEM_RES("nand", 0x14000000, 0x7ffffff); + +static struct platform_device ltq_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = <q_nand_res, + .dev = { + .platform_data = &falcon_flash_nand_data, + }, +}; + +void __init xway_register_nand(struct mtd_partition *parts, int count) +{ + falcon_flash_nand_data.chip.partitions = parts; + falcon_flash_nand_data.chip.nr_partitions = count; + platform_device_register(<q_flash_nand); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.c new file mode 100644 index 000000000..c87ffb209 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.c @@ -0,0 +1,109 @@ +/* + * Atheros AP94 reference board PCI initialization + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <lantiq_soc.h> + +#define LTQ_PCI_MEM_BASE 0x18000000 + +struct ath_fixup { + u16 *cal_data; + unsigned slot; +}; + +static int ath_num_fixups; +static struct ath_fixup ath_fixups[2]; + +static void ath_pci_fixup(struct pci_dev *dev) +{ + void __iomem *mem; + u16 *cal_data = NULL; + u16 cmd; + u32 bar0; + u32 val; + unsigned i; + + for (i = 0; i < ath_num_fixups; i++) { + if (ath_fixups[i].cal_data == NULL) + continue; + + if (ath_fixups[i].slot != PCI_SLOT(dev->devfn)) + continue; + + cal_data = ath_fixups[i].cal_data; + break; + } + + if (cal_data == NULL) + return; + + if (*cal_data != 0xa55a) { + pr_err("pci %s: invalid calibration data\n", pci_name(dev)); + return; + } + + pr_info("pci %s: fixup device configuration\n", pci_name(dev)); + + mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000); + if (!mem) { + pr_err("pci %s: ioremap error\n", pci_name(dev)); + return; + } + + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE); + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, cmd); + + /* set pointer to first reg address */ + cal_data += 3; + while (*cal_data != 0xffff) { + u32 reg; + reg = *cal_data++; + val = *cal_data++; + val |= (*cal_data++) << 16; + + ltq_w32(swab32(val), mem + reg); + udelay(100); + } + + pci_read_config_dword(dev, PCI_VENDOR_ID, &val); + dev->vendor = val & 0xffff; + dev->device = (val >> 16) & 0xffff; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); + dev->revision = val & 0xff; + dev->class = val >> 8; /* upper 3 bytes */ + + pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", + pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class); + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); + + iounmap(mem); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup); + +void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) +{ + if (ath_num_fixups >= ARRAY_SIZE(ath_fixups)) + return; + + ath_fixups[ath_num_fixups].slot = slot; + ath_fixups[ath_num_fixups].cal_data = cal_data; + ath_num_fixups++; +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.h new file mode 100644 index 000000000..095d2619c --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.h @@ -0,0 +1,6 @@ +#ifndef _PCI_ATH_FIXUP +#define _PCI_ATH_FIXUP + +void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init; + +#endif /* _PCI_ATH_FIXUP */ diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/prom.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/prom.c new file mode 100644 index 000000000..f776d5a91 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/prom.c @@ -0,0 +1,110 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/export.h> +#include <linux/clk.h> +#include <asm/bootinfo.h> +#include <asm/time.h> + +#include <lantiq_soc.h> + +#include "../prom.h" +#include "devices.h" + +#define SOC_DANUBE "Danube" +#define SOC_TWINPASS "Twinpass" +#define SOC_AMAZON_SE "Amazon_SE" +#define SOC_AR9 "AR9" +#define SOC_GR9 "GR9" +#define SOC_VR9 "VR9" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFFFFF +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 + + +void __init ltq_soc_detect(struct ltq_soc_info *i) +{ + i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT; + sprintf(i->rev_type, "1.%d", i->rev); + switch (i->partnum) { + case SOC_ID_DANUBE1: + case SOC_ID_DANUBE2: + i->name = SOC_DANUBE; + i->type = SOC_TYPE_DANUBE; + break; + + case SOC_ID_TWINPASS: + i->name = SOC_TWINPASS; + i->type = SOC_TYPE_DANUBE; + break; + + case SOC_ID_ARX188: + case SOC_ID_ARX168_1: + case SOC_ID_ARX168_2: + case SOC_ID_ARX182: + i->name = SOC_AR9; + i->type = SOC_TYPE_AR9; + break; + + case SOC_ID_GRX188: + case SOC_ID_GRX168: + i->name = SOC_GR9; + i->type = SOC_TYPE_AR9; + break; + + case SOC_ID_AMAZON_SE_1: + case SOC_ID_AMAZON_SE_2: + i->name = SOC_AMAZON_SE; + i->type = SOC_TYPE_AMAZON_SE; +#ifdef CONFIG_PCI + panic("ase is only supported for non pci kernels"); +#endif + break; + + case SOC_ID_VRX282: + case SOC_ID_VRX268: + case SOC_ID_VRX288: + i->name = SOC_VR9; + i->type = SOC_TYPE_VR9_1; + break; + + case SOC_ID_GRX268: + case SOC_ID_GRX288: + i->name = SOC_GR9; + i->type = SOC_TYPE_VR9_1; + break; + + case SOC_ID_VRX268_2: + case SOC_ID_VRX288_2: + i->name = SOC_VR9; + i->type = SOC_TYPE_VR9_2; + break; + + case SOC_ID_GRX282_2: + case SOC_ID_GRX288_2: + i->name = SOC_GR9; + i->type = SOC_TYPE_VR9_2; + + default: + unreachable(); + break; + } +} + +void __init ltq_soc_setup(void) +{ + if (ltq_is_ase()) + ltq_register_ase_asc(); + else + ltq_register_asc(1); + ltq_register_gpio(); + ltq_register_wdt(); +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/sysctrl.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/sysctrl.c new file mode 100644 index 000000000..de4ce8f1c --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/sysctrl.c @@ -0,0 +1,283 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/ioport.h> +#include <linux/export.h> +#include <linux/clkdev.h> + +#include <lantiq_soc.h> + +#include "../clk.h" +#include "../devices.h" + +/* clock control register */ +#define CGU_IFCCR 0x0018 +/* system clock register */ +#define CGU_SYS 0x0010 +/* pci control register */ +#define CGU_PCICR 0x0034 +/* ephy configuration register */ +#define CGU_EPHY 0x10 +/* power control register */ +#define PMU_PWDCR 0x1C +/* power status register */ +#define PMU_PWDSR 0x20 +/* power control register */ +#define PMU_PWDCR1 0x24 +/* power status register */ +#define PMU_PWDSR1 0x28 +/* power control register */ +#define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR)) +/* power status register */ +#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR)) + +/* PMU - power management unit */ +#define PMU_USB0_P BIT(0) +#define PMU_PCI BIT(4) +#define PMU_DMA BIT(5) +#define PMU_USB0 BIT(6) +#define PMU_EPHY BIT(7) /* ase */ +#define PMU_SPI BIT(8) +#define PMU_DFE BIT(9) +#define PMU_EBU BIT(10) +#define PMU_STP BIT(11) +#define PMU_GPT BIT(12) +#define PMU_PPE BIT(13) +#define PMU_AHBS BIT(13) /* vr9 */ +#define PMU_FPI BIT(14) +#define PMU_AHBM BIT(15) +#define PMU_PPE_QSB BIT(18) +#define PMU_PPE_SLL01 BIT(19) +#define PMU_PPE_TC BIT(21) +#define PMU_PPE_EMA BIT(22) +#define PMU_PPE_DPLUM BIT(23) +#define PMU_PPE_DPLUS BIT(24) +#define PMU_USB1_P BIT(26) +#define PMU_USB1 BIT(27) +#define PMU_SWITCH BIT(28) +#define PMU_PPE_TOP BIT(29) +#define PMU_GPHY BIT(30) +#define PMU_PCIE_CLK BIT(31) + +#define PMU1_PCIE_PHY BIT(0) +#define PMU1_PCIE_CTL BIT(1) +#define PMU1_PCIE_PDI BIT(4) +#define PMU1_PCIE_MSI BIT(5) + +#define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y)) +#define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x)) + +static struct resource ltq_cgu_resource = + MEM_RES("cgu", LTQ_CGU_BASE_ADDR, LTQ_CGU_SIZE); + +static struct resource ltq_pmu_resource = + MEM_RES("pmu", LTQ_PMU_BASE_ADDR, LTQ_PMU_SIZE); + +static struct resource ltq_ebu_resource = + MEM_RES("ebu", LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE); + +void __iomem *ltq_cgu_membase; +void __iomem *ltq_ebu_membase; +static void __iomem *ltq_pmu_membase; + +static int ltq_cgu_enable(struct clk *clk) +{ + ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | clk->bits, CGU_IFCCR); + return 0; +} + +static void ltq_cgu_disable(struct clk *clk) +{ + ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~clk->bits, CGU_IFCCR); +} + +static int ltq_pmu_enable(struct clk *clk) +{ + int err = 1000000; + + ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) & ~clk->bits, + PWDCR(clk->module)); + do {} while (--err && (ltq_pmu_r32(PWDSR(clk->module)) & clk->bits)); + + if (!err) + panic("activating PMU module failed!\n"); + + return 0; +} + +static void ltq_pmu_disable(struct clk *clk) +{ + ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) | clk->bits, + PWDCR(clk->module)); +} + +static int ltq_pci_enable(struct clk *clk) +{ + unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR); + /* set clock bus speed */ + if (ltq_is_ar9()) { + ifccr &= ~0x1f00000; + if (clk->rate == CLOCK_33M) + ifccr |= 0xe00000; + else + ifccr |= 0x700000; /* 62.5M */ + } else { + ifccr &= ~0xf00000; + if (clk->rate == CLOCK_33M) + ifccr |= 0x800000; + else + ifccr |= 0x400000; /* 62.5M */ + } + ltq_cgu_w32(ifccr, CGU_IFCCR); + return 0; +} + +static int ltq_pci_ext_enable(struct clk *clk) +{ + /* enable external pci clock */ + ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~(1 << 16), + CGU_IFCCR); + ltq_cgu_w32((1 << 30), CGU_PCICR); + return 0; +} + +static void ltq_pci_ext_disable(struct clk *clk) +{ + /* disable external pci clock (internal) */ + ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16), + CGU_IFCCR); + ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR); +} + +/* manage the clock gates via PMU */ +static inline void clkdev_add_pmu(const char *dev, const char *con, + unsigned int module, unsigned int bits) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev; + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = ltq_pmu_enable; + clk->disable = ltq_pmu_disable; + clk->module = module; + clk->bits = bits; + clkdev_add(&clk->cl); +} + +/* manage the clock generator */ +static inline void clkdev_add_cgu(const char *dev, const char *con, + unsigned int bits) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev; + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = ltq_cgu_enable; + clk->disable = ltq_cgu_disable; + clk->bits = bits; + clkdev_add(&clk->cl); +} + +/* pci needs its own enable function */ +static inline void clkdev_add_pci(void) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL); + + /* main pci clock */ + clk->cl.dev_id = "ltq_pci"; + clk->cl.con_id = NULL; + clk->cl.clk = clk; + clk->rate = CLOCK_33M; + clk->enable = ltq_pci_enable; + clk->disable = ltq_pmu_disable; + clk->module = 0; + clk->bits = PMU_PCI; + clkdev_add(&clk->cl); + + /* use internal/external bus clock */ + clk_ext->cl.dev_id = "ltq_pci"; + clk_ext->cl.con_id = "external"; + clk_ext->cl.clk = clk_ext; + clk_ext->enable = ltq_pci_ext_enable; + clk_ext->disable = ltq_pci_ext_disable; + clkdev_add(&clk_ext->cl); + +} + +void __init ltq_soc_init(void) +{ + ltq_pmu_membase = ltq_remap_resource(<q_pmu_resource); + if (!ltq_pmu_membase) + panic("Failed to remap pmu memory\n"); + + ltq_cgu_membase = ltq_remap_resource(<q_cgu_resource); + if (!ltq_cgu_membase) + panic("Failed to remap cgu memory\n"); + + ltq_ebu_membase = ltq_remap_resource(<q_ebu_resource); + if (!ltq_ebu_membase) + panic("Failed to remap ebu memory\n"); + + /* make sure to unprotect the memory region where flash is located */ + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); + + /* add our clocks */ + clkdev_add_pmu("ltq_fpi", NULL, 0, PMU_FPI); + clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA); + clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP); + clkdev_add_pmu("ltq_spi.0", NULL, 0, PMU_SPI); + clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT); + clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU); + if (!ltq_is_vr9()) + clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE); + if (!ltq_is_ase()) + clkdev_add_pci(); + if (ltq_is_ase()) { + if (ltq_cgu_r32(CGU_SYS) & (1 << 5)) + clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M); + else + clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M); + clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY), + clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY); + clkdev_add_pmu("ltq_dsl", NULL, 0, + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_AHBS | PMU_DFE); + } else if (ltq_is_vr9()) { + clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(), + ltq_vr9_fpi_hz()); + clkdev_add_pmu("ltq_pcie", "phy", 1, PMU1_PCIE_PHY); + clkdev_add_pmu("ltq_pcie", "bus", 0, PMU_PCIE_CLK); + clkdev_add_pmu("ltq_pcie", "msi", 1, PMU1_PCIE_MSI); + clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI); + clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL); + clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS); + clkdev_add_pmu("usb0", NULL, 0, PMU_USB0 | PMU_USB0_P); + clkdev_add_pmu("usb1", NULL, 0, PMU_USB1 | PMU_USB1_P); + clkdev_add_pmu("ltq_vrx200", NULL, 0, + PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB); + clkdev_add_pmu("ltq_dsl", NULL, 0, PMU_DFE | PMU_AHBS); + } else if (ltq_is_ar9()) { + clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), + ltq_ar9_fpi_hz()); + clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH); + clkdev_add_pmu("ltq_dsl", NULL, 0, + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB | PMU_AHBS | PMU_DFE); + } else { + clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), + ltq_danube_io_region_clock()); + clkdev_add_pmu("ltq_dsl", NULL, 0, + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB | PMU_AHBS | PMU_DFE); + } +} diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/timer.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/timer.c new file mode 100644 index 000000000..9794c87c7 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/timer.c @@ -0,0 +1,846 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/init.h> +#include <linux/uaccess.h> +#include <linux/unistd.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/sched.h> + +#include <asm/irq.h> +#include <asm/div64.h> +#include "../clk.h" + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_timer.h> + +#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6 + +#ifdef TIMER1A +#define FIRST_TIMER TIMER1A +#else +#define FIRST_TIMER 2 +#endif + +/* + * GPTC divider is set or not. + */ +#define GPTU_CLC_RMC_IS_SET 0 + +/* + * Timer Interrupt (IRQ) + */ +/* Must be adjusted when ICU driver is available */ +#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22) + +/* + * Bits Operation + */ +#define GET_BITS(x, msb, lsb) \ + (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) +#define SET_BITS(x, msb, lsb, value) \ + (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \ + (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb))) + +/* + * GPTU Register Mapping + */ +#define LQ_GPTU (KSEG1 + 0x1E100A00) +#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000)) +#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008)) +#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ +#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ +#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ +#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ +#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4)) +#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8)) +#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC)) + +/* + * Clock Control Register + */ +#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16) +#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8) +#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5)) +#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3)) +#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2)) +#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1)) +#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0)) + +#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value)) +#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value)) +#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0) +#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0) +#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0) +#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0) +#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0) + +/* + * ID Register + */ +#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8) +#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5) +#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0) + +/* + * Control Register of Timer/Counter nX + * n is the index of block (1 based index) + * X is either A or B + */ +#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10)) +#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9)) +#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8)) +#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6) +#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5)) +#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */ +#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3)) +#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2)) +#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1)) +#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0)) + +#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10)) +#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0) +#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0) +#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value)) +#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0) +#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0) +#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0) +#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0) +#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0) + +#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0) +#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0) +#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0) + +#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) +#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) + +#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001) +#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002) +#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004) +#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008) +#define TIMER_FLAG_NONE_EDGE 0x0000 +#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030) +#define TIMER_FLAG_REAL 0x0000 +#define TIMER_FLAG_INVERT 0x0040 +#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040) +#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070) +#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080) +#define TIMER_FLAG_CALLBACK_IN_HB 0x0200 +#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300) +#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000) + +struct timer_dev_timer { + unsigned int f_irq_on; + unsigned int irq; + unsigned int flag; + unsigned long arg1; + unsigned long arg2; +}; + +struct timer_dev { + struct mutex gptu_mutex; + unsigned int number_of_timers; + unsigned int occupation; + unsigned int f_gptu_on; + struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2]; +}; + +unsigned long ltq_danube_fpi_bus_clock(int fpi); +unsigned long ltq_vr9_fpi_bus_clock(int fpi); + +unsigned int ltq_get_fpi_bus_clock(int fpi) { + if (ltq_is_ase()) + return CLOCK_133M; + else if (ltq_is_vr9()) + return ltq_vr9_fpi_bus_clock(fpi); + + return ltq_danube_fpi_bus_clock(fpi); +} + + +static long gptu_ioctl(struct file *, unsigned int, unsigned long); +static int gptu_open(struct inode *, struct file *); +static int gptu_release(struct inode *, struct file *); + +static struct file_operations gptu_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = gptu_ioctl, + .open = gptu_open, + .release = gptu_release +}; + +static struct miscdevice gptu_miscdev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "gptu", + .fops = &gptu_fops, +}; + +static struct timer_dev timer_dev; + +static irqreturn_t timer_irq_handler(int irq, void *p) +{ + unsigned int timer; + unsigned int flag; + struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p; + + timer = irq - TIMER_INTERRUPT; + if (timer < timer_dev.number_of_timers + && dev_timer == &timer_dev.timer[timer]) { + /* Clear interrupt. */ + ltq_w32(1 << timer, LQ_GPTU_IRNCR); + + /* Call user hanler or signal. */ + flag = dev_timer->flag; + if (!(timer & 0x01) + || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { + /* 16-bit timer or timer A of 32-bit timer */ + switch (TIMER_FLAG_MASK_HANDLE(flag)) { + case TIMER_FLAG_CALLBACK_IN_IRQ: + case TIMER_FLAG_CALLBACK_IN_HB: + if (dev_timer->arg1) + (*(timer_callback)dev_timer->arg1)(dev_timer->arg2); + break; + case TIMER_FLAG_SIGNAL: + send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0); + break; + } + } + } + return IRQ_HANDLED; +} + +static inline void lq_enable_gptu(void) +{ + struct clk *clk = clk_get_sys("ltq_gptu", NULL); + clk_enable(clk); + + //ltq_pmu_enable(PMU_GPT); + + /* Set divider as 1, disable write protection for SPEN, enable module. */ + *LQ_GPTU_CLC = + GPTU_CLC_SMC_SET(0x00) | + GPTU_CLC_RMC_SET(0x01) | + GPTU_CLC_FSOE_SET(0) | + GPTU_CLC_SBWE_SET(1) | + GPTU_CLC_EDIS_SET(0) | + GPTU_CLC_SPEN_SET(0) | + GPTU_CLC_DISR_SET(0); +} + +static inline void lq_disable_gptu(void) +{ + struct clk *clk = clk_get_sys("ltq_gptu", NULL); + ltq_w32(0x00, LQ_GPTU_IRNEN); + ltq_w32(0xfff, LQ_GPTU_IRNCR); + + /* Set divider as 0, enable write protection for SPEN, disable module. */ + *LQ_GPTU_CLC = + GPTU_CLC_SMC_SET(0x00) | + GPTU_CLC_RMC_SET(0x00) | + GPTU_CLC_FSOE_SET(0) | + GPTU_CLC_SBWE_SET(0) | + GPTU_CLC_EDIS_SET(0) | + GPTU_CLC_SPEN_SET(0) | + GPTU_CLC_DISR_SET(1); + + clk_enable(clk); +} + +int lq_request_timer(unsigned int timer, unsigned int flag, + unsigned long value, unsigned long arg1, unsigned long arg2) +{ + int ret = 0; + unsigned int con_reg, irnen_reg; + int n, X; + + if (timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...", + timer, flag, value); + + if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) + value &= 0xFFFF; + else + timer &= ~0x01; + + mutex_lock(&timer_dev.gptu_mutex); + + /* + * Allocate timer. + */ + if (timer < FIRST_TIMER) { + unsigned int mask; + unsigned int shift; + /* This takes care of TIMER1B which is the only choice for Voice TAPI system */ + unsigned int offset = TIMER2A; + + /* + * Pick up a free timer. + */ + if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { + mask = 1 << offset; + shift = 1; + } else { + mask = 3 << offset; + shift = 2; + } + for (timer = offset; + timer < offset + timer_dev.number_of_timers; + timer += shift, mask <<= shift) + if (!(timer_dev.occupation & mask)) { + timer_dev.occupation |= mask; + break; + } + if (timer >= offset + timer_dev.number_of_timers) { + printk("failed![%d]\n", __LINE__); + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } else + ret = timer; + } else { + register unsigned int mask; + + /* + * Check if the requested timer is free. + */ + mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if ((timer_dev.occupation & mask)) { + printk("failed![%d] mask %#x, timer_dev.occupation %#x\n", + __LINE__, mask, timer_dev.occupation); + mutex_unlock(&timer_dev.gptu_mutex); + return -EBUSY; + } else { + timer_dev.occupation |= mask; + ret = 0; + } + } + + /* + * Prepare control register value. + */ + switch (TIMER_FLAG_MASK_EDGE(flag)) { + default: + case TIMER_FLAG_NONE_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x00); + break; + case TIMER_FLAG_RISE_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x01); + break; + case TIMER_FLAG_FALL_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x02); + break; + case TIMER_FLAG_ANY_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x03); + break; + } + if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER) + con_reg |= + TIMER_FLAG_MASK_SRC(flag) == + TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : + GPTU_CON_SRC_EXT_SET(0); + else + con_reg |= + TIMER_FLAG_MASK_SRC(flag) == + TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : + GPTU_CON_SRC_EG_SET(0); + con_reg |= + TIMER_FLAG_MASK_SYNC(flag) == + TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : + GPTU_CON_SYNC_SET(1); + con_reg |= + TIMER_FLAG_MASK_INVERT(flag) == + TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); + con_reg |= + TIMER_FLAG_MASK_SIZE(flag) == + TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : + GPTU_CON_EXT_SET(1); + con_reg |= + TIMER_FLAG_MASK_STOP(flag) == + TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); + con_reg |= + TIMER_FLAG_MASK_TYPE(flag) == + TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : + GPTU_CON_CNT_SET(1); + con_reg |= + TIMER_FLAG_MASK_DIR(flag) == + TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); + + /* + * Fill up running data. + */ + timer_dev.timer[timer - FIRST_TIMER].flag = flag; + timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1; + timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag; + + /* + * Enable GPTU module. + */ + if (!timer_dev.f_gptu_on) { + lq_enable_gptu(); + timer_dev.f_gptu_on = 1; + } + + /* + * Enable IRQ. + */ + if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) { + if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL) + timer_dev.timer[timer - FIRST_TIMER].arg1 = + (unsigned long) find_task_by_vpid((int) arg1); + + irnen_reg = 1 << (timer - FIRST_TIMER); + + if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL + || (TIMER_FLAG_MASK_HANDLE(flag) == + TIMER_FLAG_CALLBACK_IN_IRQ + && timer_dev.timer[timer - FIRST_TIMER].arg1)) { + enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); + timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1; + } + } else + irnen_reg = 0; + + /* + * Write config register, reload value and enable interrupt. + */ + n = timer >> 1; + X = timer & 0x01; + *LQ_GPTU_CON(n, X) = con_reg; + *LQ_GPTU_RELOAD(n, X) = value; + /* printk("reload value = %d\n", (u32)value); */ + *LQ_GPTU_IRNEN |= irnen_reg; + + mutex_unlock(&timer_dev.gptu_mutex); + printk("successful!\n"); + return ret; +} +EXPORT_SYMBOL(lq_request_timer); + +int lq_free_timer(unsigned int timer) +{ + unsigned int flag; + unsigned int mask; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + flag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + n = timer >> 1; + X = timer & 0x01; + + if (GPTU_CON_EN(n, X)) + *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); + + *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1); + *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1); + + if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) { + disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); + timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0; + } + + timer_dev.occupation &= ~mask; + if (!timer_dev.occupation && timer_dev.f_gptu_on) { + lq_disable_gptu(); + timer_dev.f_gptu_on = 0; + } + + mutex_unlock(&timer_dev.gptu_mutex); + + return 0; +} +EXPORT_SYMBOL(lq_free_timer); + +int lq_start_timer(unsigned int timer, int is_resume) +{ + unsigned int flag; + unsigned int mask; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + flag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(flag) == + TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + n = timer >> 1; + X = timer & 0x01; + + *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1); + + mutex_unlock(&timer_dev.gptu_mutex); + + return 0; +} +EXPORT_SYMBOL(lq_start_timer); + +int lq_stop_timer(unsigned int timer) +{ + unsigned int flag; + unsigned int mask; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER + || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + flag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + n = timer >> 1; + X = timer & 0x01; + + *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); + + mutex_unlock(&timer_dev.gptu_mutex); + + return 0; +} +EXPORT_SYMBOL(lq_stop_timer); + +int lq_reset_counter_flags(u32 timer, u32 flags) +{ + unsigned int oflag; + unsigned int mask, con_reg; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + oflag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + switch (TIMER_FLAG_MASK_EDGE(flags)) { + default: + case TIMER_FLAG_NONE_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x00); + break; + case TIMER_FLAG_RISE_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x01); + break; + case TIMER_FLAG_FALL_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x02); + break; + case TIMER_FLAG_ANY_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x03); + break; + } + if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER) + con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0); + else + con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0); + con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1); + con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); + con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1); + con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); + con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1); + con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); + + timer_dev.timer[timer - FIRST_TIMER].flag = flags; + if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT) + timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags; + + n = timer >> 1; + X = timer & 0x01; + + *LQ_GPTU_CON(n, X) = con_reg; + smp_wmb(); + printk(KERN_INFO "[%s]: counter%d oflags %#x, nflags %#x, GPTU_CON %#x\n", __func__, timer, oflag, flags, *LQ_GPTU_CON(n, X)); + mutex_unlock(&timer_dev.gptu_mutex); + return 0; +} +EXPORT_SYMBOL(lq_reset_counter_flags); + +int lq_get_count_value(unsigned int timer, unsigned long *value) +{ + unsigned int flag; + unsigned int mask; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER + || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + flag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + n = timer >> 1; + X = timer & 0x01; + + *value = *LQ_GPTU_COUNT(n, X); + + mutex_unlock(&timer_dev.gptu_mutex); + + return 0; +} +EXPORT_SYMBOL(lq_get_count_value); + +u32 lq_cal_divider(unsigned long freq) +{ + u64 module_freq, fpi = ltq_get_fpi_bus_clock(2); + u32 clock_divider = 1; + module_freq = fpi * 1000; + do_div(module_freq, clock_divider * freq); + return module_freq; +} +EXPORT_SYMBOL(lq_cal_divider); + +int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic, + int is_ext_src, unsigned int handle_flag, unsigned long arg1, + unsigned long arg2) +{ + unsigned long divider; + unsigned int flag; + + divider = lq_cal_divider(freq); + if (divider == 0) + return -EINVAL; + flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT) + | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE) + | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC) + | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN + | TIMER_FLAG_MASK_HANDLE(handle_flag); + + printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n", + timer, freq, divider); + return lq_request_timer(timer, flag, divider, arg1, arg2); +} +EXPORT_SYMBOL(lq_set_timer); + +int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload, + unsigned long arg1, unsigned long arg2) +{ + printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload); + return lq_request_timer(timer, flag, reload, arg1, arg2); +} +EXPORT_SYMBOL(lq_set_counter); + +static long gptu_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret; + struct gptu_ioctl_param param; + + if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param))) + return -EFAULT; + copy_from_user(¶m, (void *) arg, sizeof(param)); + + if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER + || GPTU_SET_COUNTER) && param.timer < 2) + || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER) + && !access_ok(VERIFY_WRITE, arg, + sizeof(struct gptu_ioctl_param))) + return -EFAULT; + + switch (cmd) { + case GPTU_REQUEST_TIMER: + ret = lq_request_timer(param.timer, param.flag, param.value, + (unsigned long) param.pid, + (unsigned long) param.sig); + if (ret > 0) { + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + timer, &ret, sizeof(&ret)); + ret = 0; + } + break; + case GPTU_FREE_TIMER: + ret = lq_free_timer(param.timer); + break; + case GPTU_START_TIMER: + ret = lq_start_timer(param.timer, param.flag); + break; + case GPTU_STOP_TIMER: + ret = lq_stop_timer(param.timer); + break; + case GPTU_GET_COUNT_VALUE: + ret = lq_get_count_value(param.timer, ¶m.value); + if (!ret) + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + value, ¶m.value, + sizeof(param.value)); + break; + case GPTU_CALCULATE_DIVIDER: + param.value = lq_cal_divider(param.value); + if (param.value == 0) + ret = -EINVAL; + else { + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + value, ¶m.value, + sizeof(param.value)); + ret = 0; + } + break; + case GPTU_SET_TIMER: + ret = lq_set_timer(param.timer, param.value, + TIMER_FLAG_MASK_STOP(param.flag) != + TIMER_FLAG_ONCE ? 1 : 0, + TIMER_FLAG_MASK_SRC(param.flag) == + TIMER_FLAG_EXT_SRC ? 1 : 0, + TIMER_FLAG_MASK_HANDLE(param.flag) == + TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL : + TIMER_FLAG_NO_HANDLE, + (unsigned long) param.pid, + (unsigned long) param.sig); + if (ret > 0) { + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + timer, &ret, sizeof(&ret)); + ret = 0; + } + break; + case GPTU_SET_COUNTER: + lq_set_counter(param.timer, param.flag, param.value, 0, 0); + if (ret > 0) { + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + timer, &ret, sizeof(&ret)); + ret = 0; + } + break; + default: + ret = -ENOTTY; + } + + return ret; +} + +static int gptu_open(struct inode *inode, struct file *file) +{ + return 0; +} + +static int gptu_release(struct inode *inode, struct file *file) +{ + return 0; +} + +int __init lq_gptu_init(void) +{ + int ret; + unsigned int i; + + ltq_w32(0, LQ_GPTU_IRNEN); + ltq_w32(0xfff, LQ_GPTU_IRNCR); + + memset(&timer_dev, 0, sizeof(timer_dev)); + mutex_init(&timer_dev.gptu_mutex); + + lq_enable_gptu(); + timer_dev.number_of_timers = GPTU_ID_CFG * 2; + lq_disable_gptu(); + if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2) + timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2; + printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers); + + ret = misc_register(&gptu_miscdev); + if (ret) { + printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret); + return ret; + } else { + printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor); + } + + for (i = 0; i < timer_dev.number_of_timers; i++) { + ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]); + if (ret) { + for (; i >= 0; i--) + free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]); + misc_deregister(&gptu_miscdev); + printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret); + return ret; + } else { + timer_dev.timer[i].irq = TIMER_INTERRUPT + i; + disable_irq(timer_dev.timer[i].irq); + printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq); + } + } + + return 0; +} + +void __exit lq_gptu_exit(void) +{ + unsigned int i; + + for (i = 0; i < timer_dev.number_of_timers; i++) { + if (timer_dev.timer[i].f_irq_on) + disable_irq(timer_dev.timer[i].irq); + free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]); + } + lq_disable_gptu(); + misc_deregister(&gptu_miscdev); +} + +module_init(lq_gptu_init); +module_exit(lq_gptu_exit); diff --git a/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq-pcie.c b/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq-pcie.c new file mode 100644 index 000000000..84517dfbc --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq-pcie.c @@ -0,0 +1,81 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_fixup_pcie.c +** PROJECT : IFX UEIP for VRX200 +** MODULES : PCIe +** +** DATE : 02 Mar 2009 +** AUTHOR : Lei Chuanhua +** DESCRIPTION : PCIe Root Complex Driver +** COPYRIGHT : Copyright (c) 2009 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** HISTORY +** $Version $Date $Author $Comment +** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version +*******************************************************************************/ +/*! + \file ifxmips_fixup_pcie.c + \ingroup IFX_PCIE + \brief PCIe Fixup functions source file +*/ +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/pci_ids.h> + +#include <lantiq_soc.h> + +#include "pcie-lantiq.h" + +#define PCI_VENDOR_ID_INFINEON 0x15D1 +#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F +#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011 +#define PCI_VENDOR_ID_LANTIQ 0x1BEF +#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011 + + + +static void __devinit +ifx_pcie_fixup_resource(struct pci_dev *dev) +{ + u32 reg; + + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); + + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s: fixup host controller %s (%04x:%04x)\n", + __func__, pci_name(dev), dev->vendor, dev->device); + + /* Setup COMMAND register */ + reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | + PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR; + pci_write_config_word(dev, PCI_COMMAND, reg); + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource); + +static void __devinit +ifx_pcie_rc_class_early_fixup(struct pci_dev *dev) +{ + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); + + if (dev->devfn == PCI_DEVFN(0, 0) && + (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { + + dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff); + + printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__); + } + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, + ifx_pcie_rc_class_early_fixup); + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE, + ifx_pcie_rc_class_early_fixup); diff --git a/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq.c b/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq.c new file mode 100644 index 000000000..daf5ae9e4 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq.c @@ -0,0 +1,42 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/of_irq.h> +#include <linux/of_pci.h> + +int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin) = NULL; +int (*ltqpci_plat_arch_init)(struct pci_dev *dev) = NULL; +int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL; +int *ltq_pci_irq_map; + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + if (ltqpci_plat_arch_init) + return ltqpci_plat_arch_init(dev); + + if (ltqpci_plat_dev_init) + return ltqpci_plat_dev_init(dev); + + return 0; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (ltqpci_map_irq) + return ltqpci_map_irq(dev, slot, pin); + if (ltq_pci_irq_map[slot]) { + dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, ltq_pci_irq_map[slot]); + return ltq_pci_irq_map[slot]; + } + printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n", + slot); + + return 0; +} + + diff --git a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-msi.c b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-msi.c new file mode 100644 index 000000000..9cbf639bb --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-msi.c @@ -0,0 +1,399 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_pcie_msi.c +** PROJECT : IFX UEIP for VRX200 +** MODULES : PCI MSI sub module +** +** DATE : 02 Mar 2009 +** AUTHOR : Lei Chuanhua +** DESCRIPTION : PCIe MSI Driver +** COPYRIGHT : Copyright (c) 2009 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** HISTORY +** $Date $Author $Comment +** 02 Mar,2009 Lei Chuanhua Initial version +*******************************************************************************/ +/*! + \defgroup IFX_PCIE_MSI MSI OS APIs + \ingroup IFX_PCIE + \brief PCIe bus driver OS interface functions +*/ + +/*! + \file ifxmips_pcie_msi.c + \ingroup IFX_PCIE + \brief PCIe MSI OS interface file +*/ + +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/pci.h> +#include <linux/msi.h> +#include <linux/module.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/traps.h> + +#include "pcie-lantiq.h" + +#define IFX_MSI_IRQ_NUM 16 +#define SM(_v, _f) (((_v) << _f##_S) & (_f)) + +#define IFX_MSI_PIC_REG_BASE (KSEG1 | 0x1F700000) +#define IFX_PCIE_MSI_IR0 (INT_NUM_IM4_IRL0 + 27) +#define IFX_PCIE_MSI_IR1 (INT_NUM_IM4_IRL0 + 28) +#define IFX_PCIE_MSI_IR2 (INT_NUM_IM4_IRL0 + 29) +#define IFX_PCIE_MSI_IR3 (INT_NUM_IM0_IRL0 + 30) + +#define IFX_MSI_PCI_INT_DISABLE 0x80000000 +#define IFX_MSI_PIC_INT_LINE 0x30000000 +#define IFX_MSI_PIC_MSG_ADDR 0x0FFF0000 +#define IFX_MSI_PIC_MSG_DATA 0x0000FFFF +#define IFX_MSI_PIC_BIG_ENDIAN 1 +#define IFX_MSI_PIC_INT_LINE_S 28 +#define IFX_MSI_PIC_MSG_ADDR_S 16 +#define IFX_MSI_PIC_MSG_DATA_S 0x0 + +enum { + IFX_PCIE_MSI_IDX0 = 0, + IFX_PCIE_MSI_IDX1, + IFX_PCIE_MSI_IDX2, + IFX_PCIE_MSI_IDX3, +}; + +typedef struct ifx_msi_irq_idx { + const int irq; + const int idx; +}ifx_msi_irq_idx_t; + +struct ifx_msi_pic { + volatile u32 pic_table[IFX_MSI_IRQ_NUM]; + volatile u32 pic_endian; /* 0x40 */ +}; +typedef struct ifx_msi_pic *ifx_msi_pic_t; + +typedef struct ifx_msi_irq { + const volatile ifx_msi_pic_t msi_pic_p; + const u32 msi_phy_base; + const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM]; + /* + * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is + * in use. + */ + u16 msi_free_irq_bitmask; + + /* + * Each bit in msi_multiple_irq_bitmask tells that the device using + * this bit in msi_free_irq_bitmask is also using the next bit. This + * is used so we can disable all of the MSI interrupts when a device + * uses multiple. + */ + u16 msi_multiple_irq_bitmask; +}ifx_msi_irq_t; + +static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = { + { + .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE, + .msi_phy_base = PCIE_MSI_PHY_BASE, + .msi_irq_idx = { + {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, + }, + .msi_free_irq_bitmask = 0, + .msi_multiple_irq_bitmask= 0, + }, +#ifdef CONFIG_IFX_PCIE_2ND_CORE + { + .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE, + .msi_phy_base = PCIE1_MSI_PHY_BASE, + .msi_irq_idx = { + {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, + }, + .msi_free_irq_bitmask = 0, + .msi_multiple_irq_bitmask= 0, + + }, +#endif /* CONFIG_IFX_PCIE_2ND_CORE */ +}; + +/* + * This lock controls updates to msi_free_irq_bitmask, + * msi_multiple_irq_bitmask and pic register settting + */ +static DEFINE_SPINLOCK(ifx_pcie_msi_lock); + +void pcie_msi_pic_init(int pcie_port) +{ + spin_lock(&ifx_pcie_msi_lock); + msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN; + spin_unlock(&ifx_pcie_msi_lock); +} + +/** + * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) + * \brief Called when a driver request MSI interrupts instead of the + * legacy INT A-D. This routine will allocate multiple interrupts + * for MSI devices that support them. A device can override this by + * programming the MSI control bits [6:4] before calling + * pci_enable_msi(). + * + * \param[in] pdev Device requesting MSI interrupts + * \param[in] desc MSI descriptor + * + * \return -EINVAL Invalid pcie root port or invalid msi bit + * \return 0 OK + * \ingroup IFX_PCIE_MSI + */ +int +arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) +{ + int irq, pos; + u16 control; + int irq_idx; + int irq_step; + int configured_private_bits; + int request_private_bits; + struct msi_msg msg; + u16 search_mask; + struct ifx_pci_controller *ctrl = pdev->bus->sysdata; + int pcie_port = ctrl->port; + + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev)); + + /* XXX, skip RC MSI itself */ + if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) { + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__); + return -EINVAL; + } + + /* + * Read the MSI config to figure out how many IRQs this device + * wants. Most devices only want 1, which will give + * configured_private_bits and request_private_bits equal 0. + */ + pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control); + + /* + * If the number of private bits has been configured then use + * that value instead of the requested number. This gives the + * driver the chance to override the number of interrupts + * before calling pci_enable_msi(). + */ + configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; + if (configured_private_bits == 0) { + /* Nothing is configured, so use the hardware requested size */ + request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; + } + else { + /* + * Use the number of configured bits, assuming the + * driver wanted to override the hardware request + * value. + */ + request_private_bits = configured_private_bits; + } + + /* + * The PCI 2.3 spec mandates that there are at most 32 + * interrupts. If this device asks for more, only give it one. + */ + if (request_private_bits > 5) { + request_private_bits = 0; + } +again: + /* + * The IRQs have to be aligned on a power of two based on the + * number being requested. + */ + irq_step = (1 << request_private_bits); + + /* Mask with one bit for each IRQ */ + search_mask = (1 << irq_step) - 1; + + /* + * We're going to search msi_free_irq_bitmask_lock for zero + * bits. This represents an MSI interrupt number that isn't in + * use. + */ + spin_lock(&ifx_pcie_msi_lock); + for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) { + if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) { + msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; + msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos; + break; + } + } + spin_unlock(&ifx_pcie_msi_lock); + + /* Make sure the search for available interrupts didn't fail */ + if (pos >= IFX_MSI_IRQ_NUM) { + if (request_private_bits) { + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free " + "interrupts, trying just one", __func__, 1 << request_private_bits); + request_private_bits = 0; + goto again; + } + else { + printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__); + return -EINVAL; + } + } + irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq; + irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx; + + IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx); + + /* + * Initialize MSI. This has to match the memory-write endianess from the device + * Address bits [23:12] + */ + spin_lock(&ifx_pcie_msi_lock); + msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) | + SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) | + SM((1 << pos), IFX_MSI_PIC_MSG_DATA); + + /* Enable this entry */ + msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE; + spin_unlock(&ifx_pcie_msi_lock); + + IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n", + pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]); + + /* Update the number of IRQs the device has available to it */ + control &= ~PCI_MSI_FLAGS_QSIZE; + control |= (request_private_bits << 4); + pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control); + + irq_set_msi_desc(irq, desc); + msg.address_hi = 0x0; + msg.address_lo = msi_irqs[pcie_port].msi_phy_base; + msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA); + IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data); + + write_msi_msg(irq, &msg); + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); + return 0; +} + +static int +pcie_msi_irq_to_port(unsigned int irq, int *port) +{ + int ret = 0; + + if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 || + irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) { + *port = IFX_PCIE_PORT0; + } +#ifdef CONFIG_IFX_PCIE_2ND_CORE + else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 || + irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) { + *port = IFX_PCIE_PORT1; + } +#endif /* CONFIG_IFX_PCIE_2ND_CORE */ + else { + printk(KERN_ERR "%s: Attempted to teardown illegal " + "MSI interrupt (%d)\n", __func__, irq); + ret = -EINVAL; + } + return ret; +} + +/** + * \fn void arch_teardown_msi_irq(unsigned int irq) + * \brief Called when a device no longer needs its MSI interrupts. All + * MSI interrupts for the device are freed. + * + * \param irq The devices first irq number. There may be multple in sequence. + * \return none + * \ingroup IFX_PCIE_MSI + */ +void +arch_teardown_msi_irq(unsigned int irq) +{ + int pos; + int number_irqs; + u16 bitmask; + int pcie_port; + + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__); + + BUG_ON(irq > (INT_NUM_IM4_IRL0 + 31)); + + if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) { + return; + } + + /* Shift the mask to the correct bit location, not always correct + * Probally, the first match will be chosen. + */ + for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) { + if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) + && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) { + break; + } + } + if (pos >= IFX_MSI_IRQ_NUM) { + printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__); + return; + } + spin_lock(&ifx_pcie_msi_lock); + /* Disable this entry */ + msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE; + msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA); + spin_unlock(&ifx_pcie_msi_lock); + /* + * Count the number of IRQs we need to free by looking at the + * msi_multiple_irq_bitmask. Each bit set means that the next + * IRQ is also owned by this device. + */ + number_irqs = 0; + while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && + (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) { + number_irqs++; + } + number_irqs++; + + /* Mask with one bit for each IRQ */ + bitmask = (1 << number_irqs) - 1; + + bitmask <<= pos; + if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) { + printk(KERN_ERR "%s: Attempted to teardown MSI " + "interrupt (%d) not in use\n", __func__, irq); + return; + } + /* Checks are done, update the in use bitmask */ + spin_lock(&ifx_pcie_msi_lock); + msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask; + msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1); + spin_unlock(&ifx_pcie_msi_lock); + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); +MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module"); +MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver"); + diff --git a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-phy.c b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-phy.c new file mode 100644 index 000000000..9f5027d7c --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-phy.c @@ -0,0 +1,408 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_pcie_phy.c +** PROJECT : IFX UEIP for VRX200 +** MODULES : PCIe PHY sub module +** +** DATE : 14 May 2009 +** AUTHOR : Lei Chuanhua +** DESCRIPTION : PCIe Root Complex Driver +** COPYRIGHT : Copyright (c) 2009 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** HISTORY +** $Version $Date $Author $Comment +** 0.0.1 14 May,2009 Lei Chuanhua Initial version +*******************************************************************************/ +/*! + \file ifxmips_pcie_phy.c + \ingroup IFX_PCIE + \brief PCIe PHY PLL register programming source file +*/ +#include <linux/types.h> +#include <linux/kernel.h> +#include <asm/paccess.h> +#include <linux/delay.h> + +#include "pcie-lantiq.h" + +/* PCIe PDI only supports 16 bit operation */ + +#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \ + ((*(volatile u16 *) (__addr)) = (__data)) + +#define IFX_PCIE_PHY_REG_READ16(__addr) \ + (*(volatile u16 *) (__addr)) + +#define IFX_PCIE_PHY_REG16(__addr) \ + (*(volatile u16 *) (__addr)) + +#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \ + u16 read_data; \ + u16 write_data; \ + read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \ + write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\ + IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \ +} while (0) + +#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */ + +static void +pcie_phy_comm_setup(int pcie_port) +{ + /* PLL Setting */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); + + /* increase the bias reference voltage */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); + + /* Endcnt */ + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); + + /* force */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); + + /* predrv_ser_en */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); + + /* ctrl_lim */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); + + /* ctrl */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); + + /* predrv_ser_en */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); + + /* RTERM*/ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); + + /* Improved 100MHz clock output */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); + + /* Reduced CDR BW to avoid glitches */ + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); +} + +#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE +static void +pcie_phy_36mhz_mode_setup(int pcie_port) +{ + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); + + /* en_ext_mmd_div_ratio */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); + + /* ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); + + /* pll_ensdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); + + /* en_const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); + + /* mmd */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); + + /* lf_mode */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); + + /* const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); + + /* const sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); + + /* pllmod */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); + + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); +} +#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ + +#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE +static void +pcie_phy_36mhz_ssc_mode_setup(int pcie_port) +{ + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); + + /* PLL Setting */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); + + /* Increase the bias reference voltage */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); + + /* Endcnt */ + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); + + /* Force */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); + + /* Predrv_ser_en */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); + + /* ctrl_lim */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); + + /* ctrl */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); + + /* predrv_ser_en */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); + + /* RTERM*/ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); + + /* en_ext_mmd_div_ratio */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); + + /* ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); + + /* pll_ensdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400); + + /* en_const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); + + /* mmd */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); + + /* lf_mode */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); + + /* const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); + + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100); + /* const sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); + + /* pllmod */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF); + + /* improved 100MHz clock output */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); + + /* reduced CDR BW to avoid glitches */ + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); + + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); +} +#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */ + +#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE +static void +pcie_phy_25mhz_mode_setup(int pcie_port) +{ + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); + /* en_const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); + + /* pll_ensdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200); + + /* en_ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002); + + /* ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070); + + /* mmd */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000); + + /* lf_mode */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000); + + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); +} +#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */ + +#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE +static void +pcie_phy_100mhz_mode_setup(int pcie_port) +{ + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); + /* en_ext_mmd_div_ratio */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); + + /* ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); + + /* pll_ensdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); + + /* en_const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); + + /* mmd */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); + + /* lf_mode */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); + + /* const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); + + /* const sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); + + /* pllmod */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); + + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); +} +#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */ + +static int +pcie_phy_wait_startup_ready(int pcie_port) +{ + int i; + + for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) { + if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) { + break; + } + udelay(10); + } + if (i >= IFX_PCIE_PLL_TIMEOUT) { + printk(KERN_ERR "%s PLL Link timeout\n", __func__); + return -1; + } + return 0; +} + +static void +pcie_phy_load_enable(int pcie_port, int slice) +{ + /* Set the load_en of tx/rx slice to '1' */ + switch (slice) { + case 1: + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010); + break; + case 2: + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010); + break; + case 3: + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002); + break; + } +} + +static void +pcie_phy_load_disable(int pcie_port, int slice) +{ + /* set the load_en of tx/rx slice to '0' */ + switch (slice) { + case 1: + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010); + break; + case 2: + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010); + break; + case 3: + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002); + break; + } +} + +static void pcie_phy_load_war(int pcie_port) +{ + int slice; + + for (slice = 1; slice < 4; slice++) { + pcie_phy_load_enable(pcie_port, slice); + udelay(1); + pcie_phy_load_disable(pcie_port, slice); + } +} + +static void pcie_phy_tx2_modulation(int pcie_port) +{ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF); + mdelay(1); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF); +} + +static void pcie_phy_tx1_modulation(int pcie_port) +{ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF); + mdelay(1); + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF); +} + +static void pcie_phy_tx_modulation_war(int pcie_port) +{ + int i; +#define PCIE_PHY_MODULATION_NUM 5 + for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) { + pcie_phy_tx2_modulation(pcie_port); + pcie_phy_tx1_modulation(pcie_port); + } +#undef PCIE_PHY_MODULATION_NUM +} + +void pcie_phy_clock_mode_setup(int pcie_port) +{ + pcie_pdi_big_endian(pcie_port); + + /* Enable PDI to access PCIe PHY register */ + pcie_pdi_pmu_enable(pcie_port); + + /* Configure PLL and PHY clock */ + pcie_phy_comm_setup(pcie_port); + +#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE + pcie_phy_36mhz_mode_setup(pcie_port); +#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE) + pcie_phy_36mhz_ssc_mode_setup(pcie_port); +#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE) + pcie_phy_25mhz_mode_setup(pcie_port); +#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE) + pcie_phy_100mhz_mode_setup(pcie_port); +#else + #error "PCIE PHY Clock Mode must be chosen first!!!!" +#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ + + /* Enable PCIe PHY and make PLL setting take effect */ + pcie_phy_pmu_enable(pcie_port); + + /* Check if we are in startup_ready status */ + pcie_phy_wait_startup_ready(pcie_port); + + pcie_phy_load_war(pcie_port); + + /* Apply TX modulation workarounds */ + pcie_phy_tx_modulation_war(pcie_port); + +#ifdef IFX_PCI_PHY_REG_DUMP + IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n"); + pcie_phy_reg_dump(pcie_port); +#endif +} + diff --git a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.c b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.c new file mode 100644 index 000000000..1df55b5c0 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.c @@ -0,0 +1,1146 @@ +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <asm/paccess.h> +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/platform_device.h> + +#define CONFIG_IFX_PCIE_1ST_CORE + +#include "pcie-lantiq.h" + +#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25) +#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8) +#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9) +#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10) +#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11) +#define MS(_v, _f) (((_v) & (_f)) >> _f##_S) +#define SM(_v, _f) (((_v) << _f##_S) & (_f)) +#define IFX_REG_SET_BIT(_f, _r) \ + IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r)) +#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10 +#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000 +#define IFX_PCIE_PHY_LOOP_CNT 5 + +static DEFINE_SPINLOCK(ifx_pcie_lock); + +int pcibios_1st_host_bus_nr(void); + +unsigned int g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG); + +static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = { + { + .ir_irq = { + .irq = IFX_PCIE_IR, + .name = "ifx_pcie_rc0", + }, + + .legacy_irq = { + { + .irq_bit = PCIE_IRN_INTA, + .irq = IFX_PCIE_INTA, + }, + { + .irq_bit = PCIE_IRN_INTB, + .irq = IFX_PCIE_INTB, + }, + { + .irq_bit = PCIE_IRN_INTC, + .irq = IFX_PCIE_INTC, + }, + { + .irq_bit = PCIE_IRN_INTD, + .irq = IFX_PCIE_INTD, + }, + }, + }, +}; + +static inline int pcie_ltssm_enable(int pcie_port) +{ + int i; + + IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */ + + /* Wait for the link to come up */ + for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) { + if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) { + break; + } + udelay(10); + } + if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) { + IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__); + return -1; + } + return 0; +} + +static inline void pcie_status_register_clear(int pcie_port) +{ + IFX_REG_W32(0, PCIE_RC_DR(pcie_port)); + IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port)); + IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port)); + IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port)); + IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port)); + IFX_REG_W32(0, PCIE_RSTS(pcie_port)); + IFX_REG_W32(0, PCIE_UES_R(pcie_port)); + IFX_REG_W32(0, PCIE_UEMR(pcie_port)); + IFX_REG_W32(0, PCIE_UESR(pcie_port)); + IFX_REG_W32(0, PCIE_CESR(pcie_port)); + IFX_REG_W32(0, PCIE_CEMR(pcie_port)); + IFX_REG_W32(0, PCIE_RESR(pcie_port)); + IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port)); + IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port)); + IFX_REG_W32(0, PCIE_TPFCS(pcie_port)); + IFX_REG_W32(0, PCIE_TNPFCS(pcie_port)); + IFX_REG_W32(0, PCIE_TCFCS(pcie_port)); + IFX_REG_W32(0, PCIE_QSR(pcie_port)); + IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port)); +} + +static inline int ifx_pcie_link_up(int pcie_port) +{ + return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0; +} + +static inline void pcie_mem_io_setup(int pcie_port) +{ + unsigned int reg; + /* + * BAR[0:1] readonly register + * RC contains only minimal BARs for packets mapped to this device + * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that + * reside on the downstream side fo the bridge. + */ + reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR) + | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR); + IFX_REG_W32(reg, PCIE_MBML(pcie_port)); + + /* PCIe_PBML, same as MBML */ + IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port)); + + /* IO Address Range */ + reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR) + | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR); + reg |= PCIE_IOBLSECS_32BIT_IO_ADDR; + IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port)); + + reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT) + | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE); + IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port)); +} + +static inline void pcie_msi_setup(int pcie_port) +{ + unsigned int reg; + + /* XXX, MSI stuff should only apply to EP */ + /* MSI Capability: Only enable 32-bit addresses */ + reg = IFX_REG_R32(PCIE_MCAPR(pcie_port)); + reg &= ~PCIE_MCAPR_ADDR64_CAP; + reg |= PCIE_MCAPR_MSI_ENABLE; + + /* Disable multiple message */ + reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE); + IFX_REG_W32(reg, PCIE_MCAPR(pcie_port)); +} + +static inline void pcie_pm_setup(int pcie_port) +{ + unsigned int reg; + + /* Enable PME, Soft reset enabled */ + reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port)); + reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST; + IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port)); +} + +static inline void pcie_bus_setup(int pcie_port) +{ + unsigned int reg; + + reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM); + IFX_REG_W32(reg, PCIE_BNR(pcie_port)); +} + +static inline void pcie_device_setup(int pcie_port) +{ + unsigned int reg; + + /* Device capability register, set up Maximum payload size */ + reg = IFX_REG_R32(PCIE_DCAP(pcie_port)); + reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT; + reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE); + + /* Only available for EP */ + reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY); + IFX_REG_W32(reg, PCIE_DCAP(pcie_port)); + + /* Device control and status register */ + /* Set Maximum Read Request size for the device as a Requestor */ + reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port)); + + /* + * Request size can be larger than the MPS used, but the completions returned + * for the read will be bounded by the MPS size. + * In our system, Max request size depends on AHB burst size. It is 64 bytes. + * but we set it as 128 as minimum one. + */ + reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE) + | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE); + + /* Enable relaxed ordering, no snoop, and all kinds of errors */ + reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN; + + IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port)); +} + +static inline void pcie_link_setup(int pcie_port) +{ + unsigned int reg; + + /* + * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM + * L0s is reported during link training via TS1 order set by N_FTS + */ + reg = IFX_REG_R32(PCIE_LCAP(pcie_port)); + reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY; + reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY); + IFX_REG_W32(reg, PCIE_LCAP(pcie_port)); + + /* Link control and status register */ + reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); + + /* Link Enable, ASPM enabled */ + reg &= ~PCIE_LCTLSTS_LINK_DISABLE; + +#ifdef CONFIG_PCIEASPM + /* + * We use the same physical reference clock that the platform provides on the connector + * It paved the way for ASPM to calculate the new exit Latency + */ + reg |= PCIE_LCTLSTS_SLOT_CLK_CFG; + reg |= PCIE_LCTLSTS_COM_CLK_CFG; + /* + * We should disable ASPM by default except that we have dedicated power management support + * Enable ASPM will cause the system hangup/instability, performance degration + */ + reg |= PCIE_LCTLSTS_ASPM_ENABLE; +#else + reg &= ~PCIE_LCTLSTS_ASPM_ENABLE; +#endif /* CONFIG_PCIEASPM */ + + /* + * The maximum size of any completion with data packet is bounded by the MPS setting + * in device control register + */ + /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */ + reg &= ~ PCIE_LCTLSTS_RCB128; + IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port)); +} + +static inline void pcie_error_setup(int pcie_port) +{ + unsigned int reg; + + /* + * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone + * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE + */ + reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)); + reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE; + + IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port)); + + /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */ + reg = IFX_REG_R32(PCIE_UEMR(pcie_port)); + reg &= ~PCIE_ALL_UNCORRECTABLE_ERR; + IFX_REG_W32(reg, PCIE_UEMR(pcie_port)); + + /* Uncorrectable Error Severity Register, ALL errors are FATAL */ + IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port)); + + /* Correctable Error Mask Register, unmask <enable> all bits */ + reg = IFX_REG_R32(PCIE_CEMR(pcie_port)); + reg &= ~PCIE_CORRECTABLE_ERR; + IFX_REG_W32(reg, PCIE_CEMR(pcie_port)); + + /* Advanced Error Capabilities and Control Registr */ + reg = IFX_REG_R32(PCIE_AECCR(pcie_port)); + reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN; + IFX_REG_W32(reg, PCIE_AECCR(pcie_port)); + + /* Root Error Command Register, Report all types of errors */ + reg = IFX_REG_R32(PCIE_RECR(pcie_port)); + reg |= PCIE_RECR_ERR_REPORT_EN; + IFX_REG_W32(reg, PCIE_RECR(pcie_port)); + + /* Clear the Root status register */ + reg = IFX_REG_R32(PCIE_RESR(pcie_port)); + IFX_REG_W32(reg, PCIE_RESR(pcie_port)); +} + +static inline void pcie_root_setup(int pcie_port) +{ + unsigned int reg; + + /* Root control and capabilities register */ + reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port)); + reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN; + IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port)); +} + +static inline void pcie_vc_setup(int pcie_port) +{ + unsigned int reg; + + /* Port VC Capability Register 2 */ + reg = IFX_REG_R32(PCIE_PVC2(pcie_port)); + reg &= ~PCIE_PVC2_VC_ARB_WRR; + reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR; + IFX_REG_W32(reg, PCIE_PVC2(pcie_port)); + + /* VC0 Resource Capability Register */ + reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port)); + reg &= ~PCIE_VC0_RC_REJECT_SNOOP; + IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port)); +} + +static inline void pcie_port_logic_setup(int pcie_port) +{ + unsigned int reg; + + /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */ + reg = IFX_REG_R32(PCIE_AFR(pcie_port)); + reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM); + reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM) + | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM); + /* L0s and L1 entry latency */ + reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY); + reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY) + | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY); + IFX_REG_W32(reg, PCIE_AFR(pcie_port)); + + /* Port Link Control Register */ + reg = IFX_REG_R32(PCIE_PLCR(pcie_port)); + reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */ + IFX_REG_W32(reg, PCIE_PLCR(pcie_port)); + + /* Lane Skew Register */ + reg = IFX_REG_R32(PCIE_LSR(pcie_port)); + /* Enable ACK/NACK and FC */ + reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE); + IFX_REG_W32(reg, PCIE_LSR(pcie_port)); + + /* Symbol Timer Register and Filter Mask Register 1 */ + reg = IFX_REG_R32(PCIE_STRFMR(pcie_port)); + + /* Default SKP interval is very accurate already, 5us */ + /* Enable IO/CFG transaction */ + reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE; + /* Disable FC WDT */ + reg &= ~PCIE_STRFMR_FC_WDT_DISABLE; + IFX_REG_W32(reg, PCIE_STRFMR(pcie_port)); + + /* Filter Masker Register 2 */ + reg = IFX_REG_R32(PCIE_FMR2(pcie_port)); + reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1; + IFX_REG_W32(reg, PCIE_FMR2(pcie_port)); + + /* VC0 Completion Receive Queue Control Register */ + reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port)); + reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE; + reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE); + IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port)); +} + +static inline void pcie_rc_cfg_reg_setup(int pcie_port) +{ + /* diable ltssm */ + IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); + + pcie_mem_io_setup(pcie_port); + pcie_msi_setup(pcie_port); + pcie_pm_setup(pcie_port); + pcie_bus_setup(pcie_port); + pcie_device_setup(pcie_port); + pcie_link_setup(pcie_port); + pcie_error_setup(pcie_port); + pcie_root_setup(pcie_port); + pcie_vc_setup(pcie_port); + pcie_port_logic_setup(pcie_port); +} + +static int ifx_pcie_wait_phy_link_up(int pcie_port) +{ + int i; + + /* Wait for PHY link is up */ + for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) { + if (ifx_pcie_link_up(pcie_port)) { + break; + } + udelay(100); + } + if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) { + printk(KERN_ERR "%s timeout\n", __func__); + return -1; + } + + /* Check data link up or not */ + if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) { + printk(KERN_ERR "%s DLL link is still down\n", __func__); + return -1; + } + + /* Check Data link active or not */ + if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) { + printk(KERN_ERR "%s DLL is not active\n", __func__); + return -1; + } + return 0; +} + +static inline int pcie_app_loigc_setup(int pcie_port) +{ + IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port)); + + /* Pull PCIe EP out of reset */ + pcie_device_rst_deassert(pcie_port); + + /* Start LTSSM training between RC and EP */ + pcie_ltssm_enable(pcie_port); + + /* Check PHY status after enabling LTSSM */ + if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) { + return -1; + } + return 0; +} + +/* + * Must be done after ltssm due to based on negotiated link + * width and payload size + * Update the Replay Time Limit. Empirically, some PCIe + * devices take a little longer to respond than expected under + * load. As a workaround for this we configure the Replay Time + * Limit to the value expected for a 512 byte MPS instead of + * our actual 128 byte MPS. The numbers below are directly + * from the PCIe spec table 3-4/5. + */ +static inline void pcie_replay_time_update(int pcie_port) +{ + unsigned int reg; + int nlw; + int rtl; + + reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); + + nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH); + switch (nlw) { + case PCIE_MAX_LENGTH_WIDTH_X1: + rtl = 1677; + break; + case PCIE_MAX_LENGTH_WIDTH_X2: + rtl = 867; + break; + case PCIE_MAX_LENGTH_WIDTH_X4: + rtl = 462; + break; + case PCIE_MAX_LENGTH_WIDTH_X8: + rtl = 258; + break; + default: + rtl = 1677; + break; + } + reg = IFX_REG_R32(PCIE_ALTRT(pcie_port)); + reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT; + reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT); + IFX_REG_W32(reg, PCIE_ALTRT(pcie_port)); + + IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n", + __func__, IFX_REG_R32(PCIE_ALTRT(pcie_port))); +} + +/* + * Table 359 Enhanced Configuration Address Mapping1) + * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1 + * Memory Address PCI Express Configuration Space + * A[(20+n-1):20] Bus Number 1 < n < 8 + * A[19:15] Device Number + * A[14:12] Function Number + * A[11:8] Extended Register Number + * A[7:2] Register Number + * A[1:0] Along with size of the access, used to generate Byte Enables + * For VR9, only the address bits [22:0] are mapped to the configuration space: + * . Address bits [22:20] select the target bus (1-of-8)1) + * . Address bits [19:15] select the target device (1-of-32) on the bus + * . Address bits [14:12] select the target function (1-of-8) within the device. + * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space + * . Address bits [1:0] define the start byte location within the selected dword. + */ +static inline unsigned int pcie_bus_addr(u8 bus_num, u16 devfn, int where) +{ + unsigned int addr; + u8 bus; + + if (!bus_num) { + /* type 0 */ + addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3); + } else { + bus = bus_num; + /* type 1, only support 8 buses */ + addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) | + ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3); + } + IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n", + __func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr); + return addr; +} + +static int pcie_valid_config(int pcie_port, int bus, int dev) +{ + /* RC itself */ + if ((bus == 0) && (dev == 0)) + return 1; + + /* No physical link */ + if (!ifx_pcie_link_up(pcie_port)) + return 0; + + /* Bus zero only has RC itself + * XXX, check if EP will be integrated + */ + if ((bus == 0) && (dev != 0)) + return 0; + + /* Maximum 8 buses supported for VRX */ + if (bus > 9) + return 0; + + /* + * PCIe is PtP link, one bus only supports only one device + * except bus zero and PCIe switch which is virtual bus device + * The following two conditions really depends on the system design + * and attached the device. + * XXX, how about more new switch + */ + if ((bus == 1) && (dev != 0)) + return 0; + + if ((bus >= 3) && (dev != 0)) + return 0; + return 1; +} + +static inline unsigned int ifx_pcie_cfg_rd(int pcie_port, unsigned int reg) +{ + return IFX_REG_R32((volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); +} + +static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, unsigned int val) +{ + IFX_REG_W32( val, (volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); +} + +static inline unsigned int ifx_pcie_rc_cfg_rd(int pcie_port, unsigned int reg) +{ + return IFX_REG_R32((volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); +} + +static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, unsigned int val) +{ + IFX_REG_W32(val, (volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); +} + +unsigned int ifx_pcie_bus_enum_read_hack(int where, unsigned int value) +{ + unsigned int tvalue = value; + + if (where == PCI_PRIMARY_BUS) { + u8 primary, secondary, subordinate; + + primary = tvalue & 0xFF; + secondary = (tvalue >> 8) & 0xFF; + subordinate = (tvalue >> 16) & 0xFF; + primary += pcibios_1st_host_bus_nr(); + secondary += pcibios_1st_host_bus_nr(); + subordinate += pcibios_1st_host_bus_nr(); + tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16); + } + return tvalue; +} + +unsigned int ifx_pcie_bus_enum_write_hack(int where, unsigned int value) +{ + unsigned int tvalue = value; + + if (where == PCI_PRIMARY_BUS) { + u8 primary, secondary, subordinate; + + primary = tvalue & 0xFF; + secondary = (tvalue >> 8) & 0xFF; + subordinate = (tvalue >> 16) & 0xFF; + if (primary > 0 && primary != 0xFF) + primary -= pcibios_1st_host_bus_nr(); + if (secondary > 0 && secondary != 0xFF) + secondary -= pcibios_1st_host_bus_nr(); + if (subordinate > 0 && subordinate != 0xFF) + subordinate -= pcibios_1st_host_bus_nr(); + tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16); + } else if (where == PCI_SUBORDINATE_BUS) { + u8 subordinate = tvalue & 0xFF; + subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0; + tvalue = subordinate; + } + return tvalue; +} + +/** + * \fn static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, + * int where, int size, unsigned int *value) + * \brief Read a value from configuration space + * + * \param[in] bus Pointer to pci bus + * \param[in] devfn PCI device function number + * \param[in] where PCI register number + * \param[in] size Register read size + * \param[out] value Pointer to return value + * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number + * \return PCIBIOS_FUNC_NOT_SUPPORTED PCI function not supported + * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found + * \return PCIBIOS_SUCCESSFUL OK + * \ingroup IFX_PCIE_OS + */ +static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int *value) +{ + unsigned int data = 0; + int bus_number = bus->number; + static const unsigned int mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; + int ret = PCIBIOS_SUCCESSFUL; + struct ifx_pci_controller *ctrl = bus->sysdata; + int pcie_port = ctrl->port; + + if (unlikely(size != 1 && size != 2 && size != 4)){ + ret = PCIBIOS_BAD_REGISTER_NUMBER; + goto out; + } + + /* Make sure the address is aligned to natural boundary */ + if (unlikely(((size - 1) & where))) { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + goto out; + } + + /* + * If we are second controller, we have to cheat OS so that it assume + * its bus number starts from 0 in host controller + */ + bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); + + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * busses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + /* + * PCIe only has a single device connected to it. It is + * always device ID 0. Don't bother doing reads for other + * device IDs on the first segment. + */ + if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) { + ret = PCIBIOS_FUNC_NOT_SUPPORTED; + goto out; + } + + if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { + *value = 0xffffffff; + ret = PCIBIOS_DEVICE_NOT_FOUND; + goto out; + } + + IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number, + PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); + + PCIE_IRQ_LOCK(ifx_pcie_lock); + if (bus_number == 0) { /* RC itself */ + unsigned int t; + + t = (where & ~3); + data = ifx_pcie_rc_cfg_rd(pcie_port, t); + IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n", + __func__, t, data); + } else { + unsigned int addr = pcie_bus_addr(bus_number, devfn, where); + + data = ifx_pcie_cfg_rd(pcie_port, addr); + if (pcie_port == IFX_PCIE_PORT0) { +#ifdef CONFIG_IFX_PCIE_HW_SWAP + data = le32_to_cpu(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } else { +#ifdef CONFIG_IFX_PCIE1_HW_SWAP + data = le32_to_cpu(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } + } + /* To get a correct PCI topology, we have to restore the bus number to OS */ + data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1); + + PCIE_IRQ_UNLOCK(ifx_pcie_lock); + IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n", + __func__, (data >> (8 * (where & 3))) & mask[size & 7], data); + + *value = (data >> (8 * (where & 3))) & mask[size & 7]; +out: + return ret; +} + +static unsigned int ifx_pcie_size_to_value(int where, int size, unsigned int data, unsigned int value) +{ + unsigned int shift; + unsigned int tdata = data; + + switch (size) { + case 1: + shift = (where & 0x3) << 3; + tdata &= ~(0xffU << shift); + tdata |= ((value & 0xffU) << shift); + break; + case 2: + shift = (where & 3) << 3; + tdata &= ~(0xffffU << shift); + tdata |= ((value & 0xffffU) << shift); + break; + case 4: + tdata = value; + break; + } + return tdata; +} + +/** + * \fn static static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + * int where, int size, unsigned int value) + * \brief Write a value to PCI configuration space + * + * \param[in] bus Pointer to pci bus + * \param[in] devfn PCI device function number + * \param[in] where PCI register number + * \param[in] size The register size to be written + * \param[in] value The valule to be written + * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number + * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found + * \return PCIBIOS_SUCCESSFUL OK + * \ingroup IFX_PCIE_OS + */ +static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int value) +{ + int bus_number = bus->number; + int ret = PCIBIOS_SUCCESSFUL; + struct ifx_pci_controller *ctrl = bus->sysdata; + int pcie_port = ctrl->port; + unsigned int tvalue = value; + unsigned int data; + + /* Make sure the address is aligned to natural boundary */ + if (unlikely(((size - 1) & where))) { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + goto out; + } + /* + * If we are second controller, we have to cheat OS so that it assume + * its bus number starts from 0 in host controller + */ + bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); + + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * busses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { + ret = PCIBIOS_DEVICE_NOT_FOUND; + goto out; + } + + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__, + bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value); + + /* XXX, some PCIe device may need some delay */ + PCIE_IRQ_LOCK(ifx_pcie_lock); + + /* + * To configure the correct bus topology using native way, we have to cheat Os so that + * it can configure the PCIe hardware correctly. + */ + tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0); + + if (bus_number == 0) { /* RC itself */ + unsigned int t; + + t = (where & ~3); + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value); + data = ifx_pcie_rc_cfg_rd(pcie_port, t); + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data); + + data = ifx_pcie_size_to_value(where, size, data, tvalue); + + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data); + ifx_pcie_rc_cfg_wr(pcie_port, t, data); + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n", + __func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t)); + } else { + unsigned int addr = pcie_bus_addr(bus_number, devfn, where); + + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value); + data = ifx_pcie_cfg_rd(pcie_port, addr); + if (pcie_port == IFX_PCIE_PORT0) { +#ifdef CONFIG_IFX_PCIE_HW_SWAP + data = le32_to_cpu(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } else { +#ifdef CONFIG_IFX_PCIE1_HW_SWAP + data = le32_to_cpu(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data); + + data = ifx_pcie_size_to_value(where, size, data, tvalue); + if (pcie_port == IFX_PCIE_PORT0) { +#ifdef CONFIG_IFX_PCIE_HW_SWAP + data = cpu_to_le32(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } else { +#ifdef CONFIG_IFX_PCIE1_HW_SWAP + data = cpu_to_le32(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data); + ifx_pcie_cfg_wr(pcie_port, addr, data); + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n", + __func__, addr, ifx_pcie_cfg_rd(pcie_port, addr)); + } + PCIE_IRQ_UNLOCK(ifx_pcie_lock); +out: + return ret; +} + +static struct resource ifx_pcie_io_resource = { + .name = "PCIe0 I/O space", + .start = PCIE_IO_PHY_BASE, + .end = PCIE_IO_PHY_END, + .flags = IORESOURCE_IO, +}; + +static struct resource ifx_pcie_mem_resource = { + .name = "PCIe0 Memory space", + .start = PCIE_MEM_PHY_BASE, + .end = PCIE_MEM_PHY_END, + .flags = IORESOURCE_MEM, +}; + +static struct pci_ops ifx_pcie_ops = { + .read = ifx_pcie_read_config, + .write = ifx_pcie_write_config, +}; + +static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = { + { + .pcic = { + .pci_ops = &ifx_pcie_ops, + .mem_resource = &ifx_pcie_mem_resource, + .io_resource = &ifx_pcie_io_resource, + }, + .port = IFX_PCIE_PORT0, + }, +}; + +static inline void pcie_core_int_clear_all(int pcie_port) +{ + unsigned int reg; + reg = IFX_REG_R32(PCIE_IRNCR(pcie_port)); + reg &= PCIE_RC_CORE_COMBINED_INT; + IFX_REG_W32(reg, PCIE_IRNCR(pcie_port)); +} + +static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id) +{ + struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id; + int pcie_port = ctrl->port; + + IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq); + pcie_core_int_clear_all(pcie_port); + return IRQ_HANDLED; +} + +static int pcie_rc_core_int_init(int pcie_port) +{ + int ret; + + /* Enable core interrupt */ + IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port)); + + /* Clear it first */ + IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port)); + ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED, + pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]); + if (ret) + printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR); + + return ret; +} + +int ifx_pcie_bios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + unsigned int irq_bit = 0; + int irq = 0; + struct ifx_pci_controller *ctrl = dev->bus->sysdata; + int pcie_port = ctrl->port; + + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin); + + if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) { + printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin); + return -1; + } + /* Pin index so minus one */ + irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit; + irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq; + IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port)); + IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port)); + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq); + return irq; +} + +/** + * \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev) + * \brief Called to perform platform specific PCI setup + * + * \param[in] dev The Linux PCI device structure for the device to map + * \return OK + * \ingroup IFX_PCIE_OS + */ +int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev) +{ + u16 config; + unsigned int dconfig; + int pos; + /* Enable reporting System errors and parity errors on all devices */ + /* Enable parity checking and error reporting */ + pci_read_config_word(dev, PCI_COMMAND, &config); + config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE | + PCI_COMMAND_FAST_BACK*/; + pci_write_config_word(dev, PCI_COMMAND, config); + + if (dev->subordinate) { + /* Set latency timers on sub bridges */ + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */ + /* More bridge error detection */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); + config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); + } + /* Enable the PCIe normal error reporting */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pos) { + /* Disable system error generation in response to error messages */ + pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config); + config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE); + pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config); + + /* Clear PCIE Capability's Device Status */ + pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config); + pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config); + + /* Update Device Control */ + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); + /* Correctable Error Reporting */ + config |= PCI_EXP_DEVCTL_CERE; + /* Non-Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_NFERE; + /* Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_FERE; + /* Unsupported Request */ + config |= PCI_EXP_DEVCTL_URRE; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); + } + + /* Find the Advanced Error Reporting capability */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (pos) { + /* Clear Uncorrectable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig); + /* Enable reporting of all uncorrectable errors */ + /* Uncorrectable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); + /* + * Leave severity at HW default. This only controls if + * errors are reported as uncorrectable or + * correctable, not if the error is reported. + */ + /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ + /* Clear Correctable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); + /* Enable reporting of all correctable errors */ + /* Correctable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); + /* Advanced Error Capabilities */ + pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); + /* ECRC Generation Enable */ + if (dconfig & PCI_ERR_CAP_ECRC_GENC) + dconfig |= PCI_ERR_CAP_ECRC_GENE; + /* ECRC Check Enable */ + if (dconfig & PCI_ERR_CAP_ECRC_CHKC) + dconfig |= PCI_ERR_CAP_ECRC_CHKE; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); + + /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ + /* Enable Root Port's interrupt in response to error messages */ + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, + PCI_ERR_ROOT_CMD_COR_EN | + PCI_ERR_ROOT_CMD_NONFATAL_EN | + PCI_ERR_ROOT_CMD_FATAL_EN); + /* Clear the Root status register */ + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); + } + /* WAR, only 128 MRRS is supported, force all EPs to support this value */ + pcie_set_readrq(dev, 128); + return 0; +} + +static void pcie_phy_rst(int pcie_port) +{ + pcie_phy_rst_assert(pcie_port); + pcie_phy_rst_deassert(pcie_port); + /* Make sure PHY PLL is stable */ + udelay(20); +} + +static int pcie_rc_initialize(int pcie_port) +{ + int i; + + pcie_rcu_endian_setup(pcie_port); + + pcie_ep_gpio_rst_init(pcie_port); + + /* + * XXX, PCIe elastic buffer bug will cause not to be detected. One more + * reset PCIe PHY will solve this issue + */ + for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) { + /* Disable PCIe PHY Analog part for sanity check */ + pcie_phy_pmu_disable(pcie_port); + pcie_phy_rst(pcie_port); + /* PCIe Core reset enabled, low active, sw programmed */ + pcie_core_rst_assert(pcie_port); + /* Put PCIe EP in reset status */ + pcie_device_rst_assert(pcie_port); + /* PCI PHY & Core reset disabled, high active, sw programmed */ + pcie_core_rst_deassert(pcie_port); + /* Already in a quiet state, program PLL, enable PHY, check ready bit */ + pcie_phy_clock_mode_setup(pcie_port); + /* Enable PCIe PHY and Clock */ + pcie_core_pmu_setup(pcie_port); + /* Clear status registers */ + pcie_status_register_clear(pcie_port); +#ifdef CONFIG_PCI_MSI + pcie_msi_init(pcie_port); +#endif /* CONFIG_PCI_MSI */ + pcie_rc_cfg_reg_setup(pcie_port); + + /* Once link is up, break out */ + if (pcie_app_loigc_setup(pcie_port) == 0) + break; + } + if (i >= IFX_PCIE_PHY_LOOP_CNT) { + printk(KERN_ERR "%s link up failed!!!!!\n", __func__); + return -EIO; + } + /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */ + pcie_replay_time_update(pcie_port); + return 0; +} + +static int inline ifx_pcie_startup_port_nr(void) +{ + int pcie_port = IFX_PCIE_PORT0; + + pcie_port = IFX_PCIE_PORT0; + return pcie_port; +} + +/** + * \fn static int __init ifx_pcie_bios_init(void) + * \brief Initialize the IFX PCIe controllers + * + * \return -EIO PCIe PHY link is not up + * \return -ENOMEM Configuration/IO space failed to map + * \return 0 OK + * \ingroup IFX_PCIE_OS + */ +extern int (*ltqpci_plat_arch_init)(struct pci_dev *dev); +extern int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); +static int __devinit ltq_pcie_probe(struct platform_device *pdev) +{ + char ver_str[128] = {0}; + void __iomem *io_map_base; + int pcie_port; + int startup_port; + ltqpci_map_irq = ifx_pcie_bios_map_irq; + ltqpci_plat_arch_init = ifx_pcie_bios_plat_dev_init; + /* Enable AHB Master/ Slave */ + pcie_ahb_pmu_setup(); + + startup_port = ifx_pcie_startup_port_nr(); + + ltq_gpio_request(&pdev->dev, IFX_PCIE_GPIO_RESET, 0, 1, "pcie-reset"); + + for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){ + if (pcie_rc_initialize(pcie_port) == 0) { + /* Otherwise, warning will pop up */ + io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE); + if (io_map_base == NULL) + return -ENOMEM; + ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base; + register_pci_controller(&ifx_pcie_controller[pcie_port].pcic); + /* XXX, clear error status */ + pcie_rc_core_int_init(pcie_port); + } + } + + printk(KERN_INFO "%s", ver_str); +return 0; +} + +static struct platform_driver ltq_pcie_driver = { + .probe = ltq_pcie_probe, + .driver = { + .name = "pcie-xway", + .owner = THIS_MODULE, + }, +}; + +int __init pciebios_init(void) +{ + return platform_driver_register(<q_pcie_driver); +} + +arch_initcall(pciebios_init); diff --git a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.h b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.h new file mode 100644 index 000000000..d877c23a8 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.h @@ -0,0 +1,1305 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_pcie_reg.h +** PROJECT : IFX UEIP for VRX200 +** MODULES : PCIe module +** +** DATE : 02 Mar 2009 +** AUTHOR : Lei Chuanhua +** DESCRIPTION : PCIe Root Complex Driver +** COPYRIGHT : Copyright (c) 2009 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** HISTORY +** $Version $Date $Author $Comment +** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version +*******************************************************************************/ +#ifndef IFXMIPS_PCIE_REG_H +#define IFXMIPS_PCIE_REG_H +#include <linux/version.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +/*! + \file ifxmips_pcie_reg.h + \ingroup IFX_PCIE + \brief header file for PCIe module register definition +*/ +/* PCIe Address Mapping Base */ +#define PCIE_CFG_PHY_BASE 0x1D000000UL +#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE) +#define PCIE_CFG_SIZE (8 * 1024 * 1024) + +#define PCIE_MEM_PHY_BASE 0x1C000000UL +#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE) +#define PCIE_MEM_SIZE (16 * 1024 * 1024) +#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1) + +#define PCIE_IO_PHY_BASE 0x1D800000UL +#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE) +#define PCIE_IO_SIZE (1 * 1024 * 1024) +#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1) + +#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000) +#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900) +#define PCIE_MSI_PHY_BASE 0x1F600000UL + +#define PCIE_PDI_PHY_BASE 0x1F106800UL +#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE) +#define PCIE_PDI_SIZE 0x400 + +#define PCIE1_CFG_PHY_BASE 0x19000000UL +#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE) +#define PCIE1_CFG_SIZE (8 * 1024 * 1024) + +#define PCIE1_MEM_PHY_BASE 0x18000000UL +#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE) +#define PCIE1_MEM_SIZE (16 * 1024 * 1024) +#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1) + +#define PCIE1_IO_PHY_BASE 0x19800000UL +#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE) +#define PCIE1_IO_SIZE (1 * 1024 * 1024) +#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1) + +#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000) +#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700) +#define PCIE1_MSI_PHY_BASE 0x1F400000UL + +#define PCIE1_PDI_PHY_BASE 0x1F700400UL +#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE) +#define PCIE1_PDI_SIZE 0x400 + +#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE)) +#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE)) +#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE)) +#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE)) +#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END)) +#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE)) +#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END)) +#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG)) +#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE)) +#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE)) + +/* PCIe Application Logic Register */ +/* RC Core Control Register */ +#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10) +/* This should be enabled after initializing configuratin registers + * Also should check link status retraining bit + */ +#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */ + +/* RC Core Debug Register */ +#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14) +#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */ +#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */ +#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1 +#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */ +#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4 + +#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */ +#define PCIE_RC_DR_PM_DEV_STATE_S 9 + +#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */ +#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */ +#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */ + +/* Current Power State Definition */ +enum { + PCIE_RC_DR_D0 = 0, + PCIE_RC_DR_D1, /* Not supported */ + PCIE_RC_DR_D2, /* Not supported */ + PCIE_RC_DR_D3, + PCIE_RC_DR_UN, +}; + +/* PHY Link Status Register */ +#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18) +#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */ + +/* Electromechanical Control Register */ +#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C) +#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */ +#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */ +#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */ +#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */ +#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */ +#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */ +#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */ +#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */ + +/* Interrupt Status Register */ +#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20) +#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */ +#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */ +#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */ +#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */ +#define PCIE_IR_SR_AHB_LU_ERR_S 4 +#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */ +#define PCIE_IR_SR_INT_MSG_NUM_S 9 +#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ +#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27 + +/* Message Control Register */ +#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30) +#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */ +#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */ + +#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34) + +/* Vendor-Defined Message Requester ID Register */ +#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38) +#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF +#define PCIE_VDM_RID_VDMRID_S 0 + +/* ASPM Control Register */ +#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40) +#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */ +#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */ +#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */ + +/* Vendor Message DW0 Register */ +#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50) +#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */ +#define PCIE_VM_MSG_DW0_TYPE_S 0 +#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */ +#define PCIE_VM_MSG_DW0_FORMAT_S 5 +#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */ +#define PCIE_VM_MSG_DW0_TC_S 12 +#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */ +#define PCIE_VM_MSG_DW0_ATTR_S 18 +#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */ +#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */ +#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */ +#define PCIE_VM_MSG_DW0_LEN_S 22 + +/* Format Definition */ +enum { + PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/ + PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */ + PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */ + PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */ +}; + +/* Traffic Class Definition */ +enum { + PCIE_VM_MSG_TC0 = 0, + PCIE_VM_MSG_TC1, + PCIE_VM_MSG_TC2, + PCIE_VM_MSG_TC3, + PCIE_VM_MSG_TC4, + PCIE_VM_MSG_TC5, + PCIE_VM_MSG_TC6, + PCIE_VM_MSG_TC7, +}; + +/* Attributes Definition */ +enum { + PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */ + PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */ + PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/ + PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */ +}; + +/* Payload Size Definition */ +#define PCIE_VM_MSG_LEN_MIN 0 +#define PCIE_VM_MSG_LEN_MAX 1024 + +/* Vendor Message DW1 Register */ +#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54) +#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */ +#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8 +#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */ +#define PCIE_VM_MSG_DW1_CODE_S 16 +#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */ +#define PCIE_VM_MSG_DW1_TAG_S 24 + +#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58) +#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C) + +/* Vendor Message Request Register */ +#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60) +#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */ + + +/* AHB Slave Side Band Control Register */ +#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70) +#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */ +#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */ +#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */ +#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */ +#define PCIE_AHB_SSB_REQ_ATTR_S 3 +#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */ +#define PCIE_AHB_SSB_REQ_TC_S 5 + +/* AHB Master SideBand Ctrl Register */ +#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74) +#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */ +#define PCIE_AHB_MSB_RESP_ATTR_S 0 +#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */ +#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */ +#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */ +#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */ +#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */ +#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6 + +/* AHB Control Register, fixed bus enumeration exception */ +#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78) +#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001 + +/* Interrupt Enalbe Register */ +#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4) +#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8) +#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC) + +/* PCIe interrupt enable/control/capture register definition */ +#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */ +#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */ +#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */ +#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */ +#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */ +#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */ +#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */ +#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */ +#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */ +#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */ +#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */ +#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */ +#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */ +#define PCIE_IRN_INTA 0x00002000 /* INTA */ +#define PCIE_IRN_INTB 0x00004000 /* INTB */ +#define PCIE_IRN_INTC 0x00008000 /* INTC */ +#define PCIE_IRN_INTD 0x00010000 /* INTD */ +#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */ + +#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \ + PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\ + PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \ + PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \ + PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT) +/* PCIe RC Configuration Register */ +#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00) + +/* Bit definition from pci_reg.h */ +#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04) +#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08) +#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */ +/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */ +#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/ +#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */ + +#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */ +/* Bus Number Register bits */ +#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF +#define PCIE_BNR_PRIMARY_BUS_NUM_S 0 +#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00 +#define PCIE_PNR_SECONDARY_BUS_NUM_S 8 +#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000 +#define PCIE_PNR_SUB_BUS_NUM_S 16 + +/* IO Base/Limit Register bits */ +#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */ +#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001 +#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0 +#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4 +#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100 +#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000 +#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12 + +/* Non-prefetchable Memory Base/Limit Register bit */ +#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */ +#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0 +#define PCIE_MBML_MEM_BASE_ADDR_S 4 +#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000 +#define PCIE_MBML_MEM_LIMIT_ADDR_S 20 + +/* Prefetchable Memory Base/Limit Register bit */ +#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */ +#define PCIE_PMBL_64BIT_ADDR 0x00000001 +#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0 +#define PCIE_PMBL_UPPER_12BIT_S 4 +#define PCIE_PMBL_E64MA 0x00010000 +#define PCIE_PMBL_END_ADDR 0xFFF00000 +#define PCIE_PMBL_END_ADDR_S 20 +#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */ +#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */ + +/* I/O Base/Limit Upper 16 bits register */ +#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */ +#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF +#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0 +#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000 +#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16 + +#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34) +#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38) + +/* Interrupt and Secondary Bridge Control Register */ +#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C) + +#define PCIE_INTRBCTRL_INT_LINE 0x000000FF +#define PCIE_INTRBCTRL_INT_LINE_S 0 +#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00 +#define PCIE_INTRBCTRL_INT_PIN_S 8 +#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */ +#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */ +#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */ +#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */ +#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */ +#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */ +/* Others are read only */ +enum { + PCIE_INTRBCTRL_INT_NON = 0, + PCIE_INTRBCTRL_INTA, + PCIE_INTRBCTRL_INTB, + PCIE_INTRBCTRL_INTC, + PCIE_INTRBCTRL_INTD, +}; + +#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40) + +/* Power Management Control and Status Register */ +#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44) + +#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */ +#define PCIE_PM_CSR_POWER_STATE_S 0 +#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */ +#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */ +#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */ + +/* MSI Capability Register for EP */ +#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50) + +#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */ +#define PCIE_MCAPR_MSI_CAP_ID_S 0 +#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */ +#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8 +#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */ +#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */ +#define PCIE_MCAPR_MULTI_MSG_CAP_S 17 +#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */ +#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20 +#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */ + +/* MSI Message Address Register */ +#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54) + +#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */ + +/* MSI Message Upper Address Register */ +#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58) + +/* MSI Message Data Register */ +#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C) + +#define PCIE_MD_DATA 0x0000FFFF /* Message Data */ +#define PCIE_MD_DATA_S 0 + +/* PCI Express Capability Register */ +#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70) + +#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */ +#define PCIE_XCAP_ID_S 0 +#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */ +#define PCIE_XCAP_NEXT_CAP_S 8 +#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */ +#define PCIE_XCAP_VER_S 16 +#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */ +#define PCIE_XCAP_DEV_PORT_TYPE_S 20 +#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */ +#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */ +#define PCIE_XCAP_MSG_INT_NUM_S 25 + +/* Device Capability Register */ +#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74) + +#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */ +#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0 +#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */ +#define PCIE_DCAP_PHANTOM_FUNC_S 3 +#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */ +#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */ +#define PCIE_DCAP_EP_L0S_LATENCY_S 6 +#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */ +#define PCIE_DCAP_EP_L1_LATENCY_S 9 +#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */ + +/* Maximum payload size supported */ +enum { + PCIE_MAX_PAYLOAD_128 = 0, + PCIE_MAX_PAYLOAD_256, + PCIE_MAX_PAYLOAD_512, + PCIE_MAX_PAYLOAD_1024, + PCIE_MAX_PAYLOAD_2048, + PCIE_MAX_PAYLOAD_4096, +}; + +/* Device Control and Status Register */ +#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78) + +#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */ +#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */ +#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */ +#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */ +#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */ +#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */ +#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5 +#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */ +#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */ +#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */ +#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/ +#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/ +#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12 +#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */ +#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */ +#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */ +#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */ +#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */ +#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */ + +#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \ + PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \ + PCIE_DCTLSYS_UR_REQ_EN) + +/* Link Capability Register */ +#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C) +#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */ +#define PCIE_LCAP_MAX_LINK_SPEED_S 0 +#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */ +#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4 +#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */ +#define PCIE_LCAP_ASPM_LEVEL_S 10 +#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */ +#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12 +#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */ +#define PCIE_LCAP_L1_EXIT_LATENCY_S 15 +#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */ +#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */ +#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */ +#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */ +#define PCIE_LCAP_PORT_NUM_S 24 + +/* Maximum Length width definition */ +#define PCIE_MAX_LENGTH_WIDTH_RES 0x00 +#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */ +#define PCIE_MAX_LENGTH_WIDTH_X2 0x02 +#define PCIE_MAX_LENGTH_WIDTH_X4 0x04 +#define PCIE_MAX_LENGTH_WIDTH_X8 0x08 +#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C +#define PCIE_MAX_LENGTH_WIDTH_X16 0x10 +#define PCIE_MAX_LENGTH_WIDTH_X32 0x20 + +/* Active State Link PM definition */ +enum { + PCIE_ASPM_RES0 = 0, + PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */ + PCIE_ASPM_RES1, + PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */ +}; + +/* L0s Exit Latency definition */ +enum { + PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */ + PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */ + PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */ + PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */ + PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */ + PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */ + PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */ + PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */ +}; + +/* L1 Exit Latency definition */ +enum { + PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */ + PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */ + PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */ + PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */ + PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */ + PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */ + PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */ + PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */ +}; + +/* Link Control and Status Register */ +#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80) +#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */ +#define PCIE_LCTLSTS_ASPM_ENABLE_S 0 +#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/ +#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */ +#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */ +#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */ +#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */ +#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */ +#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */ +#define PCIE_LCTLSTS_LINK_SPEED_S 16 +#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */ +#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20 +#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */ +#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */ +#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */ + +/* Slot Capabilities Register */ +#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84) + +/* Slot Capabilities */ +#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88) + +/* Root Control and Capability Register */ +#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C) +#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */ +#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */ +#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */ +#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */ +#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \ + PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR) +/* Root Status Register */ +#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90) +#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */ +#define PCIE_RSTS_PME_REQ_ID_S 0 +#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */ +#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */ + +/* PCI Express Enhanced Capability Header */ +#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100) +#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */ +#define PCIE_ENHANCED_CAP_ID_S 0 +#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */ +#define PCIE_ENHANCED_CAP_VER_S 16 +#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */ +#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20 + +/* Uncorrectable Error Status Register */ +#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104) +#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */ +#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */ +#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */ +#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */ +#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */ +#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */ +#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */ +#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */ +#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */ +#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */ +#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */ +#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \ + PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \ + PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\ + PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ) + +/* Uncorrectable Error Mask Register, Mask means no report */ +#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108) + +/* Uncorrectable Error Severity Register */ +#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C) + +/* Correctable Error Status Register */ +#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110) +#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */ +#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */ +#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */ +#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */ +#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */ +#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */ +#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\ + PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR) + +/* Correctable Error Mask Register */ +#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114) + +/* Advanced Error Capabilities and Control Register */ +#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118) +#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */ +#define PCIE_AECCR_FIRST_ERR_PTR_S 0 +#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */ +#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */ +#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */ +#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */ + +/* Header Log Register 1 */ +#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C) + +/* Header Log Register 2 */ +#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120) + +/* Header Log Register 3 */ +#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124) + +/* Header Log Register 4 */ +#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128) + +/* Root Error Command Register */ +#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C) +#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */ +#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */ +#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */ +#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \ + PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN) + +/* Root Error Status Register */ +#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130) +#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */ +#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */ +#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */ +#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */ +#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */ +#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */ +#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */ +#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ +#define PCIE_RESR_AER_INT_MSG_NUM_S 27 + +/* Error Source Indentification Register */ +#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134) +#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF +#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0 +#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000 +#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16 + +/* VC Enhanced Capability Header */ +#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140) + +/* Port VC Capability Register */ +#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144) +#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */ +#define PCIE_PVC1_EXT_VC_CNT_S 0 +#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */ +#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4 +#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */ +#define PCIE_PVC1_REF_CLK_S 8 +#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */ +#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10 + +/* Extended Virtual Channel Count Defintion */ +#define PCIE_EXT_VC_CNT_MIN 0 +#define PCIE_EXT_VC_CNT_MAX 7 + +/* Port Arbitration Table Entry Size Definition */ +enum { + PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0, + PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT, + PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT, + PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT, +}; + +/* Port VC Capability Register 2 */ +#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148) +#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */ +#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ +#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ +#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ +#define PCIE_PVC2_VC_ARB_WRR 0x0000000F +#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */ +#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24 + +/* Port VC Control and Status Register */ +#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C) +#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */ +#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */ +#define PCIE_PVCCRSR_VC_ARB_SEL_S 1 +#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */ + +/* VC0 Resource Capability Register */ +#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150) +#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */ +#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\ + PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \ + PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR) + +#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */ +#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */ +#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16 +#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */ +#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24 + +/* VC0 Resource Control Register */ +#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154) +#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */ +#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */ +#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */ +#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */ +#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */ +#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */ +#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */ +#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */ +#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */ + +#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */ +#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */ +#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17 +#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */ +#define PCIE_VC0_RC0_VC_ID_S 24 +#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */ + +/* VC0 Resource Status Register */ +#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158) +#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */ +#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */ + +/* Ack Latency Timer and Replay Timer Register */ +#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700) +#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */ +#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0 +#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */ +#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16 + +/* Other Message Register */ +#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704) + +/* Port Force Link Register */ +#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708) +#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */ +#define PCIE_PFLR_LINK_NUM_S 0 +#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */ +#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */ +#define PCIE_PFLR_LINK_STATE_S 16 +#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */ +#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24 + +/* Ack Frequency Register */ +#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C) +#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */ +#define PCIE_AFR_AF_S 0 +#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */ +#define PCIE_AFR_FTS_NUM_S 8 +#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/ +#define PCIE_AFR_COM_FTS_NUM_S 16 +#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */ +#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24 +#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */ +#define PCIE_AFR_L1_ENTRY_LATENCY_S 27 +#define PCIE_AFR_FTS_NUM_DEFAULT 32 +#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7 +#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5 + +/* Port Link Control Register */ +#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710) +#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */ +#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */ +#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */ +#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */ +#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */ +#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */ +#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */ +#define PCIE_PLCR_LINK_MODE_S 16 +#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */ + +/* Lane Skew Register */ +#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714) +#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */ +#define PCIE_LSR_LANE_SKEW_NUM_S 0 +#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */ +#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */ +#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */ + +/* Symbol Number Register */ +#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718) +#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */ +#define PCIE_SNR_TS_S 0 +#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */ +#define PCIE_SNR_SKP_S 8 +#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */ +#define PCIE_SNR_REPLAY_TIMER_S 14 +#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */ +#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19 +#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */ +#define PCIE_SNR_FC_TIMER_S 28 + +/* Symbol Timer Register and Filter Mask Register 1 */ +#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C) +#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */ +#define PCIE_STRFMR_SKP_INTERVAL_S 0 +#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */ +#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */ +#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */ +#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */ +#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */ +#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */ +#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */ +#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */ +#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */ +#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */ +#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */ +#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */ +#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */ +#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */ +#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */ +#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */ +#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */ + +#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */ + +/* Filter Masker Register 2 */ +#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720) +#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */ +#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */ + +/* Debug Register 0 */ +#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728) + +/* Debug Register 1 */ +#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C) + +/* Transmit Posted FC Credit Status Register */ +#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730) +#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */ +#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0 +#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */ +#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12 + +/* Transmit Non-Posted FC Credit Status */ +#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734) +#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */ +#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0 +#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */ +#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12 + +/* Transmit Complete FC Credit Status Register */ +#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738) +#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */ +#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0 +#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */ +#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12 + +/* Queue Status Register */ +#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C) +#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */ +#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */ +#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */ + +/* VC Transmit Arbitration Register 1 */ +#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740) +#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */ +#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */ +#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */ +#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */ + +/* VC Transmit Arbitration Register 2 */ +#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744) +#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */ +#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */ +#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */ +#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */ + +/* VC0 Posted Receive Queue Control Register */ +#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748) +#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */ +#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0 +#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */ +#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12 +#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */ +#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20 +#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */ +#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */ + +/* VC0 Non-Posted Receive Queue Control */ +#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C) +#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */ +#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0 +#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */ +#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12 +#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */ +#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20 + +/* VC0 Completion Receive Queue Control */ +#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750) +#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */ +#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0 +#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */ +#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12 +#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */ +#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21 + +/* Applicable to the above three registers */ +enum { + PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1, + PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2, + PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4, +}; + +/* VC0 Posted Buffer Depth Register */ +#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8) +#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */ +#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0 +#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */ +#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16 + +/* VC0 Non-Posted Buffer Depth Register */ +#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC) +#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */ +#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0 +#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */ +#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16 + +/* VC0 Completion Buffer Depth Register */ +#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0) +#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */ +#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0 +#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */ +#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16 + +/* PHY Status Register, all zeros in VR9 */ +#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810) + +/* PHY Control Register, all zeros in VR9 */ +#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814) + +/* + * PCIe PDI PHY register definition, suppose all the following + * stuff is confidential. + * XXX, detailed bit definition + */ +#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1)) +#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1)) +#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1)) +#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1)) +#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1)) +#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1)) +#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1)) +#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1)) +#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1)) +#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1)) +#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1)) + +#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1)) +#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1)) +#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1)) +#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1)) +#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1)) +#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1)) +#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1)) +#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1)) + +#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1)) +#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1)) +#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1)) +#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1)) +#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1)) +#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1)) +#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1)) + +#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1)) +#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1)) +#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1)) +#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1)) +#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1)) + +/* Interrupt related stuff */ +#define PCIE_LEGACY_DISABLE 0 +#define PCIE_LEGACY_INTA 1 +#define PCIE_LEGACY_INTB 2 +#define PCIE_LEGACY_INTC 3 +#define PCIE_LEGACY_INTD 4 +#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD + +#define PCIE_IRQ_LOCK(lock) do { \ + unsigned long flags; \ + spin_lock_irqsave(&(lock), flags); +#define PCIE_IRQ_UNLOCK(lock) \ + spin_unlock_irqrestore(&(lock), flags); \ +} while (0) + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) +#define IRQF_SHARED SA_SHIRQ +#endif + +#define PCIE_MSG_MSI 0x00000001 +#define PCIE_MSG_ISR 0x00000002 +#define PCIE_MSG_FIXUP 0x00000004 +#define PCIE_MSG_READ_CFG 0x00000008 +#define PCIE_MSG_WRITE_CFG 0x00000010 +#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG) +#define PCIE_MSG_REG 0x00000020 +#define PCIE_MSG_INIT 0x00000040 +#define PCIE_MSG_ERR 0x00000080 +#define PCIE_MSG_PHY 0x00000100 +#define PCIE_MSG_ANY 0x000001ff + +#define IFX_PCIE_PORT0 0 +#define IFX_PCIE_PORT1 1 + +#ifdef CONFIG_IFX_PCIE_2ND_CORE +#define IFX_PCIE_CORE_NR 2 +#else +#define IFX_PCIE_CORE_NR 1 +#endif + +//#define IFX_PCIE_ERROR_INT + +//#define IFX_PCIE_DBG + +#if defined(IFX_PCIE_DBG) +#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \ + if (g_pcie_debug_flag & (_m)) { \ + ifx_pcie_debug((_fmt), ##args); \ + } \ +} while (0) + +#define INLINE +#else +#define IFX_PCIE_PRINT(_m, _fmt, args...) \ + do {} while(0) +#define INLINE inline +#endif + +struct ifx_pci_controller { + struct pci_controller pcic; + + /* RC specific, per host bus information */ + u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */ +}; + +typedef struct ifx_pcie_ir_irq { + const unsigned int irq; + const char name[16]; +}ifx_pcie_ir_irq_t; + +typedef struct ifx_pcie_legacy_irq{ + const u32 irq_bit; + const int irq; +}ifx_pcie_legacy_irq_t; + +typedef struct ifx_pcie_irq { + ifx_pcie_ir_irq_t ir_irq; + ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX]; +}ifx_pcie_irq_t; + +extern u32 g_pcie_debug_flag; +extern void ifx_pcie_debug(const char *fmt, ...); +extern void pcie_phy_clock_mode_setup(int pcie_port); +extern void pcie_msi_pic_init(int pcie_port); +extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value); +extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value); + + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/clk.h> + +#include <lantiq_soc.h> + +#define IFX_PCIE_GPIO_RESET 38 +#define IFX_REG_R32 ltq_r32 +#define IFX_REG_W32 ltq_w32 +#define CONFIG_IFX_PCIE_HW_SWAP +#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C)) +#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010)) +#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/ + +#define IFX_RCU (KSEG1 | 0x1F203000) +#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */ +#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */ +#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */ +#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE + +#define IFX_PMU1_MODULE_PCIE_PHY (0) +#define IFX_PMU1_MODULE_PCIE_CTRL (1) +#define IFX_PMU1_MODULE_PDI (4) +#define IFX_PMU1_MODULE_MSI (5) + +#define IFX_PMU_MODULE_PCIE_L0_CLK (31) + + +static inline void pcie_ep_gpio_rst_init(int pcie_port) +{ +} + +static inline void pcie_ahb_pmu_setup(void) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "ahb"); + clk_enable(clk); + //ltq_pmu_enable(PMU_AHBM | PMU_AHBS); +} + +static inline void pcie_rcu_endian_setup(int pcie_port) +{ + u32 reg; + + reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); +#ifdef CONFIG_IFX_PCIE_HW_SWAP + reg |= IFX_RCU_AHB_BE_PCIE_M; + reg |= IFX_RCU_AHB_BE_PCIE_S; + reg &= ~IFX_RCU_AHB_BE_XBAR_M; +#else + reg |= IFX_RCU_AHB_BE_PCIE_M; + reg &= ~IFX_RCU_AHB_BE_PCIE_S; + reg &= ~IFX_RCU_AHB_BE_XBAR_M; +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); + IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); +} + +static inline void pcie_phy_pmu_enable(int pcie_port) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "phy"); + clk_enable(clk); + //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY); +} + +static inline void pcie_phy_pmu_disable(int pcie_port) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "phy"); + clk_disable(clk); + //ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY); +} + +static inline void pcie_pdi_big_endian(int pcie_port) +{ + u32 reg; + + /* SRAM2PDI endianness control. */ + reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); + /* Config AHB->PCIe and PDI endianness */ + reg |= IFX_RCU_AHB_BE_PCIE_PDI; + IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); +} + +static inline void pcie_pdi_pmu_enable(int pcie_port) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "pdi"); + clk_enable(clk); + //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI); +} + +static inline void pcie_core_rst_assert(int pcie_port) +{ + u32 reg; + + reg = IFX_REG_R32(IFX_RCU_RST_REQ); + + /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */ + reg |= 0x00400000; + IFX_REG_W32(reg, IFX_RCU_RST_REQ); +} + +static inline void pcie_core_rst_deassert(int pcie_port) +{ + u32 reg; + + /* Make sure one micro-second delay */ + udelay(1); + + /* Reset PCIe PHY & Core, bit 22 */ + reg = IFX_REG_R32(IFX_RCU_RST_REQ); + reg &= ~0x00400000; + IFX_REG_W32(reg, IFX_RCU_RST_REQ); +} + +static inline void pcie_phy_rst_assert(int pcie_port) +{ + u32 reg; + + reg = IFX_REG_R32(IFX_RCU_RST_REQ); + reg |= 0x00001000; /* Bit 12 */ + IFX_REG_W32(reg, IFX_RCU_RST_REQ); +} + +static inline void pcie_phy_rst_deassert(int pcie_port) +{ + u32 reg; + + /* Make sure one micro-second delay */ + udelay(1); + + reg = IFX_REG_R32(IFX_RCU_RST_REQ); + reg &= ~0x00001000; /* Bit 12 */ + IFX_REG_W32(reg, IFX_RCU_RST_REQ); +} + +static inline void pcie_device_rst_assert(int pcie_port) +{ + gpio_set_value(IFX_PCIE_GPIO_RESET, 0); + // ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +} + +static inline void pcie_device_rst_deassert(int pcie_port) +{ + mdelay(100); + gpio_set_value(IFX_PCIE_GPIO_RESET, 1); +// ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +} + +static inline void pcie_core_pmu_setup(int pcie_port) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "ctl"); + clk_enable(clk); + clk = clk_get_sys("ltq_pcie", "bus"); + clk_enable(clk); + + //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL); + //ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK); +} + +static inline void pcie_msi_init(int pcie_port) +{ + struct clk *clk; + pcie_msi_pic_init(pcie_port); + clk = clk_get_sys("ltq_pcie", "msi"); + clk_enable(clk); + //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI); +} + +static inline u32 +ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) +{ + u32 tbus_number = bus_number; + +#ifdef CONFIG_IFX_PCI + if (pcibios_host_nr() > 1) { + tbus_number -= pcibios_1st_host_bus_nr(); + } +#endif /* CONFIG_IFX_PCI */ + return tbus_number; +} + +static inline u32 +ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) +{ + struct pci_dev *pdev; + u32 tvalue = value; + + /* Sanity check */ + pdev = pci_get_slot(bus, devfn); + if (pdev == NULL) { + return tvalue; + } + + /* Only care about PCI bridge */ + if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { + return tvalue; + } + + if (read) { /* Read hack */ + #ifdef CONFIG_IFX_PCI + if (pcibios_host_nr() > 1) { + tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); + } + #endif /* CONFIG_IFX_PCI */ + } + else { /* Write hack */ + #ifdef CONFIG_IFX_PCI + if (pcibios_host_nr() > 1) { + tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); + } + #endif + } + return tvalue; +} + +#endif /* IFXMIPS_PCIE_VR9_H */ + |