diff options
Diffstat (limited to 'target/linux/ixp4xx')
12 files changed, 24 insertions, 12 deletions
diff --git a/target/linux/ixp4xx/patches-3.3/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-3.3/105-wg302v1_support.patch index 1e8fdaa51..c9d5b9421 100644 --- a/target/linux/ixp4xx/patches-3.3/105-wg302v1_support.patch +++ b/target/linux/ixp4xx/patches-3.3/105-wg302v1_support.patch @@ -112,7 +112,7 @@ +subsys_initcall(wg302v1_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c -@@ -0,0 +1,144 @@ +@@ -0,0 +1,145 @@ +/* + * arch/arm/mach-ixp4xx/wg302v1-setup.c + * @@ -255,5 +255,6 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END +#endif diff --git a/target/linux/ixp4xx/patches-3.3/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-3.3/110-pronghorn_series_support.patch index 529cddb43..f795fb576 100644 --- a/target/linux/ixp4xx/patches-3.3/110-pronghorn_series_support.patch +++ b/target/linux/ixp4xx/patches-3.3/110-pronghorn_series_support.patch @@ -127,7 +127,7 @@ +subsys_initcall(pronghorn_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c -@@ -0,0 +1,247 @@ +@@ -0,0 +1,249 @@ +/* + * arch/arm/mach-ixp4xx/pronghorn-setup.c + * @@ -362,6 +362,7 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END + +MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro") @@ -374,6 +375,7 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h diff --git a/target/linux/ixp4xx/patches-3.3/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-3.3/115-sidewinder_support.patch index f2e626d16..0ffd83973 100644 --- a/target/linux/ixp4xx/patches-3.3/115-sidewinder_support.patch +++ b/target/linux/ixp4xx/patches-3.3/115-sidewinder_support.patch @@ -130,7 +130,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> +subsys_initcall(sidewinder_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c -@@ -0,0 +1,150 @@ +@@ -0,0 +1,151 @@ +/* + * arch/arm/mach-ixp4xx/sidewinder-setup.c + * @@ -280,4 +280,5 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END diff --git a/target/linux/ixp4xx/patches-3.3/120-compex_support.patch b/target/linux/ixp4xx/patches-3.3/120-compex_support.patch index da59f4c07..3166f6722 100644 --- a/target/linux/ixp4xx/patches-3.3/120-compex_support.patch +++ b/target/linux/ixp4xx/patches-3.3/120-compex_support.patch @@ -50,7 +50,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o --- /dev/null +++ b/arch/arm/mach-ixp4xx/compex-setup.c -@@ -0,0 +1,137 @@ +@@ -0,0 +1,138 @@ +/* + * arch/arm/mach-ixp4xx/compex-setup.c + * @@ -187,6 +187,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c diff --git a/target/linux/ixp4xx/patches-3.3/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-3.3/130-wrt300nv2_support.patch index caa2b3887..638af2903 100644 --- a/target/linux/ixp4xx/patches-3.3/130-wrt300nv2_support.patch +++ b/target/linux/ixp4xx/patches-3.3/130-wrt300nv2_support.patch @@ -103,7 +103,7 @@ +subsys_initcall(wrt300nv2_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c -@@ -0,0 +1,109 @@ +@@ -0,0 +1,110 @@ +/* + * arch/arm/mach-ixp4xx/wrt300nv2-setup.c + * @@ -211,6 +211,7 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END +#endif --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h diff --git a/target/linux/ixp4xx/patches-3.3/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-3.3/150-lanready_ap1000_support.patch index da3c1432f..c2b25b3cb 100644 --- a/target/linux/ixp4xx/patches-3.3/150-lanready_ap1000_support.patch +++ b/target/linux/ixp4xx/patches-3.3/150-lanready_ap1000_support.patch @@ -1,6 +1,6 @@ --- /dev/null +++ b/arch/arm/mach-ixp4xx/ap1000-setup.c -@@ -0,0 +1,152 @@ +@@ -0,0 +1,153 @@ +/* + * arch/arm/mach-ixp4xx/ap1000-setup.c + * @@ -151,6 +151,7 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END +#endif --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c diff --git a/target/linux/ixp4xx/patches-3.3/160-delayed_uart_io.patch b/target/linux/ixp4xx/patches-3.3/160-delayed_uart_io.patch index a3b1f25e5..18d93979d 100644 --- a/target/linux/ixp4xx/patches-3.3/160-delayed_uart_io.patch +++ b/target/linux/ixp4xx/patches-3.3/160-delayed_uart_io.patch @@ -112,7 +112,7 @@ Add a new UART I/O type for slow busses such as the ixp4xx expansion bus case UPIO_MEM: case UPIO_MEM32: case UPIO_AU: -@@ -2435,6 +2436,7 @@ int uart_match_port(struct uart_port *po +@@ -2436,6 +2437,7 @@ int uart_match_port(struct uart_port *po case UPIO_HUB6: return (port1->iobase == port2->iobase) && (port1->hub6 == port2->hub6); diff --git a/target/linux/ixp4xx/patches-3.3/180-tw5334_support.patch b/target/linux/ixp4xx/patches-3.3/180-tw5334_support.patch index 2b6f0f049..7d5a6f220 100644 --- a/target/linux/ixp4xx/patches-3.3/180-tw5334_support.patch +++ b/target/linux/ixp4xx/patches-3.3/180-tw5334_support.patch @@ -35,7 +35,7 @@ obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o --- /dev/null +++ b/arch/arm/mach-ixp4xx/tw5334-setup.c -@@ -0,0 +1,164 @@ +@@ -0,0 +1,165 @@ +/* + * arch/arm/mach-ixp4xx/tw5334-setup.c + * @@ -198,6 +198,7 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END +#endif --- /dev/null diff --git a/target/linux/ixp4xx/patches-3.3/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-3.3/185-mi424wr_support.patch index 08ad72640..4d61cee7a 100644 --- a/target/linux/ixp4xx/patches-3.3/185-mi424wr_support.patch +++ b/target/linux/ixp4xx/patches-3.3/185-mi424wr_support.patch @@ -74,7 +74,7 @@ + --- /dev/null +++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c -@@ -0,0 +1,380 @@ +@@ -0,0 +1,381 @@ +/* + * arch/arm/mach-ixp4xx/mi424wr-setup.c + * @@ -453,6 +453,7 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END + --- a/arch/arm/mach-ixp4xx/Makefile diff --git a/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch b/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch index 6cee21e89..57dfdace8 100644 --- a/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch +++ b/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch @@ -82,7 +82,7 @@ +subsys_initcall(cambria_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/cambria-setup.c -@@ -0,0 +1,1005 @@ +@@ -0,0 +1,1006 @@ +/* + * arch/arm/mach-ixp4xx/cambria-setup.c + * @@ -1087,6 +1087,7 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig diff --git a/target/linux/ixp4xx/patches-3.3/500-usr8200_support.patch b/target/linux/ixp4xx/patches-3.3/500-usr8200_support.patch index 8ce1b4129..38a638897 100644 --- a/target/linux/ixp4xx/patches-3.3/500-usr8200_support.patch +++ b/target/linux/ixp4xx/patches-3.3/500-usr8200_support.patch @@ -116,7 +116,7 @@ +subsys_initcall(usr8200_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/usr8200-setup.c -@@ -0,0 +1,213 @@ +@@ -0,0 +1,214 @@ +/* + * arch/arm/mach-ixp4xx/usr8200-setup.c + * @@ -329,6 +329,7 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h diff --git a/target/linux/ixp4xx/patches-3.3/520-tw2662_support.patch b/target/linux/ixp4xx/patches-3.3/520-tw2662_support.patch index edce4771b..c7940a769 100644 --- a/target/linux/ixp4xx/patches-3.3/520-tw2662_support.patch +++ b/target/linux/ixp4xx/patches-3.3/520-tw2662_support.patch @@ -118,7 +118,7 @@ +subsys_initcall(tw2662_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/tw2662-setup.c -@@ -0,0 +1,212 @@ +@@ -0,0 +1,213 @@ +/* + * arch/arm/mach-ixp4xx/tw2662-setup.c + * @@ -329,5 +329,6 @@ +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif ++ .restart = ixp4xx_restart, +MACHINE_END +#endif |