diff options
Diffstat (limited to 'target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h')
| -rw-r--r-- | target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h new file mode 100644 index 000000000..d8f1cdd9f --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h @@ -0,0 +1,168 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCPEXH +#define __INCPEXH + +#include "mvCommon.h" +#include "mvOs.h" +#include "pex/mvPexRegs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" + + + +/* NOTE not supported in this driver:*/ + + +/* defines */ +/* The number of supported PEX interfaces depend on Marvell controller */ +/* device number. This device number ID is located on the PEX unit */ +/* configuration header. This creates a loop where calling PEX */ +/* configuration read/write routine results a call to get PEX configuration */ +/* information etc. This macro defines a default PEX interface. This PEX */ +/* interface is sure to exist. */ +#define PEX_DEFAULT_IF 0 + + +/* typedefs */ +/* The Marvell controller supports both root complex and end point devices */ +/* This enumeration describes the PEX type. */ +typedef enum _mvPexType +{ + MV_PEX_ROOT_COMPLEX, /* root complex device */ + MV_PEX_END_POINT /* end point device */ +}MV_PEX_TYPE; + +typedef enum _mvPexWidth +{ + MV_PEX_WITDH_X1 = 1, + MV_PEX_WITDH_X2, + MV_PEX_WITDH_X3, + MV_PEX_WITDH_X4, + MV_PEX_WITDH_INVALID +}MV_PEX_WIDTH; + +/* PEX Bar attributes */ +typedef struct _mvPexMode +{ + MV_PEX_TYPE pexType; + MV_PEX_WIDTH pexWidth; + MV_BOOL pexLinkUp; +}MV_PEX_MODE; + + + +/* Global Functions prototypes */ +/* mvPexInit - Initialize PEX interfaces*/ +MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType); + +/* mvPexModeGet - Get Pex If mode */ +MV_U32 mvPexModeGet(MV_U32 pexIf,MV_PEX_MODE *pexMode); + +/* mvPexConfigRead - Read from configuration space */ +MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func,MV_U32 regOff); + +/* mvPexConfigWrite - Write to configuration space */ +MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data); + +/* mvPexMasterEnable - Enable/disale PEX interface master transactions.*/ +MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable); + +/* mvPexSlaveEnable - Enable/disale PEX interface slave transactions.*/ +MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable); + +/* mvPexLocalBusNumSet - Set PEX interface local bus number.*/ +MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum); + +/* mvPexLocalBusNumGet - Get PEX interface local bus number.*/ +MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf); + +/* mvPexLocalDevNumSet - Set PEX interface local device number.*/ +MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum); + +/* mvPexLocalDevNumGet - Get PEX interface local device number.*/ +MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf); +/* mvPexForceX1 - Force PEX interface to X1 mode. */ +MV_U32 mvPexForceX1(MV_U32 pexIf); + +/* mvPexIsPowerUp - Is PEX interface Power up? */ +MV_BOOL mvPexIsPowerUp(MV_U32 pexIf); + +/* mvPexPowerDown - Power Down */ +MV_VOID mvPexPowerDown(MV_U32 pexIf); + +/* mvPexPowerUp - Power Up */ +MV_VOID mvPexPowerUp(MV_U32 pexIf); + +/* mvPexPhyRegRead - Pex phy read */ +MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value); + +/* mvPexPhyRegWrite - Pex phy write */ +MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value); + +MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable); + +#endif /* #ifndef __INCPEXH */ |