diff options
Diffstat (limited to 'target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h')
| -rw-r--r-- | target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h new file mode 100644 index 000000000..f95546624 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h @@ -0,0 +1,192 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDram +#define __INCmvDram + +#include "ddr2/mvDramIf.h" +#include "twsi/mvTwsi.h" + +#define MAX_DIMM_NUM 2 +#define SPD_SIZE 128 + +/* Dimm spd offsets */ +#define DIMM_MEM_TYPE 2 +#define DIMM_ROW_NUM 3 +#define DIMM_COL_NUM 4 +#define DIMM_MODULE_BANK_NUM 5 +#define DIMM_DATA_WIDTH 6 +#define DIMM_VOLT_IF 8 +#define DIMM_MIN_CC_AT_MAX_CAS 9 +#define DIMM_ERR_CHECK_TYPE 11 +#define DIMM_REFRESH_INTERVAL 12 +#define DIMM_SDRAM_WIDTH 13 +#define DIMM_ERR_CHECK_DATA_WIDTH 14 +#define DIMM_MIN_CLK_DEL 15 +#define DIMM_BURST_LEN_SUP 16 +#define DIMM_DEV_BANK_NUM 17 +#define DIMM_SUP_CAL 18 +#define DIMM_DDR2_TYPE_INFORMATION 20 /* DDR2 only */ +#define DIMM_BUF_ADDR_CONT_IN 21 +#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1 23 +#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2 25 +#define DIMM_MIN_ROW_PRECHARGE_TIME 27 +#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE 28 +#define DIMM_MIN_RAS_TO_CAS_DELAY 29 +#define DIMM_MIN_RAS_PULSE_WIDTH 30 +#define DIMM_BANK_DENSITY 31 +#define DIMM_MIN_WRITE_RECOVERY_TIME 36 +#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY 37 +#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY 38 +#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD 42 +#define DIMM_SPD_VERSION 62 + +/* Dimm Memory Type values */ +#define DIMM_MEM_TYPE_SDRAM 0x4 +#define DIMM_MEM_TYPE_DDR1 0x7 +#define DIMM_MEM_TYPE_DDR2 0x8 + +#define DIMM_MODULE_MANU_OFFS 64 +#define DIMM_MODULE_MANU_SIZE 8 +#define DIMM_MODULE_VEN_OFFS 73 +#define DIMM_MODULE_VEN_SIZE 25 +#define DIMM_MODULE_ID_OFFS 99 +#define DIMM_MODULE_ID_SIZE 18 + +/* enumeration for voltage levels. */ +typedef enum _mvDimmVoltageIf +{ + TTL_5V_TOLERANT, + LVTTL, + HSTL_1_5V, + SSTL_3_3V, + SSTL_2_5V, + VOLTAGE_UNKNOWN, +} MV_DIMM_VOLTAGE_IF; + + +/* enumaration for SDRAM CAS Latencies. */ +typedef enum _mvDimmSdramCas +{ + SD_CL_1 =1, + SD_CL_2, + SD_CL_3, + SD_CL_4, + SD_CL_5, + SD_CL_6, + SD_CL_7, + SD_FAULT +}MV_DIMM_SDRAM_CAS; + + +/* DIMM information structure */ +typedef struct _mvDimmInfo +{ + MV_MEMORY_TYPE memoryType; /* DDR or SDRAM */ + + MV_U8 spdRawData[SPD_SIZE]; /* Content of SPD-EEPROM copied 1:1 */ + + /* DIMM dimensions */ + MV_U32 numOfRowAddr; + MV_U32 numOfColAddr; + MV_U32 numOfModuleBanks; + MV_U32 dataWidth; + MV_U32 errorCheckType; /* ECC , PARITY..*/ + MV_U32 sdramWidth; /* 4,8,16 or 32 */ + MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ + MV_U32 burstLengthSupported; + MV_U32 numOfBanksOnEachDevice; + MV_U32 suportedCasLatencies; + MV_U32 refreshInterval; + MV_U32 dimmBankDensity; + MV_U32 dimmTypeInfo; /* DDR2 only */ + MV_U32 dimmAttributes; + + /* DIMM timing parameters */ + MV_U32 minCycleTimeAtMaxCasLatPs; + MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; + MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; + MV_U32 minRowPrechargeTime; + MV_U32 minRowActiveToRowActive; + MV_U32 minRasToCasDelay; + MV_U32 minRasPulseWidth; + MV_U32 minWriteRecoveryTime; /* DDR2 only */ + MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ + MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ + MV_U32 minRefreshToActiveCmd; /* DDR2 only */ + + /* Parameters calculated from the extracted DIMM information */ + MV_U32 size; /* 16,64,128,256 or 512 MByte in MB units */ + MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit in MB units */ + MV_U32 numberOfDevices; + +} MV_DIMM_INFO; + + +MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo); +MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo); +MV_VOID dimmSpdPrint(MV_U32 dimmNum); +MV_STATUS dimmSpdCpy(MV_VOID); + +#endif /* __INCmvDram */ |