aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm63xx')
-rw-r--r--target/linux/brcm63xx/patches-3.3/109-bcm63xx-fix-transfer-bits_per_words-check.patch29
-rw-r--r--target/linux/brcm63xx/patches-3.3/110-spi-bcm63xx-fix-multi-transfer-messages.patch279
-rw-r--r--target/linux/brcm63xx/patches-3.3/404-bcm963xx_flashmap.patch6
3 files changed, 311 insertions, 3 deletions
diff --git a/target/linux/brcm63xx/patches-3.3/109-bcm63xx-fix-transfer-bits_per_words-check.patch b/target/linux/brcm63xx/patches-3.3/109-bcm63xx-fix-transfer-bits_per_words-check.patch
new file mode 100644
index 000000000..37d9d49d6
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/109-bcm63xx-fix-transfer-bits_per_words-check.patch
@@ -0,0 +1,29 @@
+From fbef4dff80be6254e36ab5b9c655d248a3991ded Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sat, 24 Nov 2012 12:08:22 +0100
+Subject: [PATCH 3.7] spi/bcm63xx: fix transfer bits_per_words check
+
+Transfers often do not have bits_per_words set, so use the spi device's
+bits_per_words in this case.
+
+This fixes the driver rejecting valid transfers e.g. generated by
+spi_write() or spi_read().
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/spi/spi-bcm63xx.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -103,7 +103,8 @@ static int bcm63xx_spi_check_transfer(st
+ {
+ u8 bits_per_word;
+
+- bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
++ bits_per_word = (t && t->bits_per_word) ?
++ t->bits_per_word : spi->bits_per_word;
+ if (bits_per_word != 8) {
+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
+ __func__, bits_per_word);
diff --git a/target/linux/brcm63xx/patches-3.3/110-spi-bcm63xx-fix-multi-transfer-messages.patch b/target/linux/brcm63xx/patches-3.3/110-spi-bcm63xx-fix-multi-transfer-messages.patch
new file mode 100644
index 000000000..941de48c3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/110-spi-bcm63xx-fix-multi-transfer-messages.patch
@@ -0,0 +1,279 @@
+From 0f2ae1e1282ff64f74a5e36f7da874f94911225e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 14 Nov 2012 22:22:33 +0100
+Subject: [PATCH] spi/bcm63xx: fix multi transfer messages
+
+The BCM63XX SPI controller does not support keeping CS asserted after
+sending its buffer. This breaks common usages like spi_write_then_read,
+where it is expected to be kept active during the whole transfers.
+
+Work around this by combining the transfers into one if the buffer
+allows. For spi_write_then_read, use the prepend byte feature to write
+to "prepend" the write if it is less than 15 bytes, allowing the whole
+fifo size for the read.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+Tested on a SPI conntected switch which required keeping CS active between
+the register read command and reading the register contents.
+
+Based on Mark's spi/next.
+
+Not sure if this is stable material, as it's quite invasive.
+
+ drivers/spi/spi-bcm63xx.c | 172 ++++++++++++++++++++++++++++++---------------
+ 1 file changed, 117 insertions(+), 55 deletions(-)
+
+--- a/drivers/spi/spi-bcm63xx.c
++++ b/drivers/spi/spi-bcm63xx.c
+@@ -38,6 +38,8 @@
+ #define PFX KBUILD_MODNAME
+ #define DRV_VER "0.1.2"
+
++#define BCM63XX_SPI_MAX_PREPEND 15
++
+ struct bcm63xx_spi {
+ struct completion done;
+
+@@ -50,16 +52,10 @@ struct bcm63xx_spi {
+ unsigned int msg_type_shift;
+ unsigned int msg_ctl_width;
+
+- /* Data buffers */
+- const unsigned char *tx_ptr;
+- unsigned char *rx_ptr;
+-
+ /* data iomem */
+ u8 __iomem *tx_io;
+ const u8 __iomem *rx_io;
+
+- int remaining_bytes;
+-
+ struct clk *clk;
+ struct platform_device *pdev;
+ };
+@@ -184,50 +180,60 @@ static int bcm63xx_spi_setup(struct spi_
+ return 0;
+ }
+
+-/* Fill the TX FIFO with as many bytes as possible */
+-static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
+-{
+- u8 size;
+-
+- /* Fill the Tx FIFO with as many bytes as possible */
+- size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
+- bs->fifo_size;
+- memcpy_toio(bs->tx_io, bs->tx_ptr, size);
+- bs->remaining_bytes -= size;
+-}
+-
+ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
+- struct spi_transfer *t)
++ struct spi_transfer *first,
++ unsigned int n_transfers)
+ {
+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+ u16 msg_ctl;
+ u16 cmd;
++ unsigned int i, timeout, total_len = 0, prepend_len = 0, len = 0;
++ struct spi_transfer *t = first;
++ u8 rx_tail;
++ bool do_rx = false;
++ bool do_tx = false;
+
+ /* Disable the CMD_DONE interrupt */
+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+
+- dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+- t->tx_buf, t->rx_buf, t->len);
++ if (n_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
++ prepend_len = t->len;
++
++ /* prepare the buffer */
++ for (i = 0; i < n_transfers; i++) {
++ if (t->tx_buf) {
++ do_tx = true;
++ memcpy_toio(bs->tx_io + total_len, t->tx_buf, t->len);
++
++ /* don't prepend more than one tx */
++ if (t != first)
++ prepend_len = 0;
++ }
++
++ if (t->rx_buf) {
++ do_rx = true;
++ if (t == first)
++ prepend_len = 0;
++ }
+
+- /* Transmitter is inhibited */
+- bs->tx_ptr = t->tx_buf;
+- bs->rx_ptr = t->rx_buf;
+-
+- if (t->tx_buf) {
+- bs->remaining_bytes = t->len;
+- bcm63xx_spi_fill_tx_fifo(bs);
++ total_len += t->len;
++
++ t = list_entry(t->transfer_list.next, struct spi_transfer,
++ transfer_list);
+ }
+
++ len = total_len - prepend_len;
++
+ init_completion(&bs->done);
+
+ /* Fill in the Message control register */
+- msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
++ msg_ctl = (len << SPI_BYTE_CNT_SHIFT);
+
+- if (t->rx_buf && t->tx_buf)
++ if (do_rx && do_tx && prepend_len == 0)
+ msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
+- else if (t->rx_buf)
++ else if (do_rx)
+ msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
+- else if (t->tx_buf)
++ else if (do_tx)
+ msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
+
+ switch (bs->msg_ctl_width) {
+@@ -245,14 +251,41 @@ static unsigned int bcm63xx_txrx_bufs(st
+
+ /* Issue the transfer */
+ cmd = SPI_CMD_START_IMMEDIATE;
+- cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
++ cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
+ cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
+ bcm_spi_writew(bs, cmd, SPI_CMD);
+
+ /* Enable the CMD_DONE interrupt */
+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
+
+- return t->len - bs->remaining_bytes;
++ timeout = wait_for_completion_timeout(&bs->done, HZ);
++ if (!timeout)
++ return -ETIMEDOUT;
++
++ /* read out all data */
++ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
++
++ if (do_rx && rx_tail != len)
++ return -EINVAL;
++
++ if (!rx_tail)
++ return total_len;
++
++ len = 0;
++ t = first;
++ /* Read out all the data */
++ for (i = 0; i < n_transfers; i++) {
++ if (t->rx_buf)
++ memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);
++
++ if (t != first || prepend_len == 0)
++ len += t->len;
++
++ t = list_entry(t->transfer_list.next, struct spi_transfer,
++ transfer_list);
++ }
++
++ return total_len;
+ }
+
+ static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
+@@ -277,42 +310,71 @@ static int bcm63xx_spi_transfer_one(stru
+ struct spi_message *m)
+ {
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+- struct spi_transfer *t;
++ struct spi_transfer *t, *first = NULL;
+ struct spi_device *spi = m->spi;
+ int status = 0;
+- unsigned int timeout = 0;
++ unsigned int n_transfers = 0, total_len = 0;
++ bool can_use_prepend = false;
+
++ /*
++ * This SPI controller does not support keeping CS active after a
++ * transfer, so we need to combine the transfers into one until we may
++ * deassert CS.
++ */
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+- unsigned int len = t->len;
+- u8 rx_tail;
+-
+ status = bcm63xx_spi_check_transfer(spi, t);
+ if (status < 0)
+ goto exit;
+
+- /* configure adapter for a new transfer */
+- bcm63xx_spi_setup_transfer(spi, t);
++ if (!first)
++ first = t;
+
+- while (len) {
+- /* send the data */
+- len -= bcm63xx_txrx_bufs(spi, t);
+-
+- timeout = wait_for_completion_timeout(&bs->done, HZ);
+- if (!timeout) {
+- status = -ETIMEDOUT;
+- goto exit;
+- }
++ n_transfers++;
++ total_len += t->len;
++
++ if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
++ first->len <= BCM63XX_SPI_MAX_PREPEND)
++ can_use_prepend = true;
++ else if (can_use_prepend && t->tx_buf)
++ can_use_prepend = false;
++
++ if ((can_use_prepend &&
++ total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) ||
++ (!can_use_prepend && total_len > bs->fifo_size)) {
++ status = -EINVAL;
++ goto exit;
++ }
+
+- /* read out all data */
+- rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
++ /* all transfers have to be made at the same speed */
++ if (t->speed_hz != first->speed_hz) {
++ status = -EINVAL;
++ goto exit;
++ }
+
+- /* Read out all the data */
+- if (rx_tail)
+- memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
++ /* CS will be deasserted directly after the transfer */
++ if (t->delay_usecs) {
++ status = -EINVAL;
++ goto exit;
+ }
+
+- m->actual_length += t->len;
++ if (t->cs_change ||
++ list_is_last(&t->transfer_list, &m->transfers)) {
++ /* configure adapter for a new transfer */
++ bcm63xx_spi_setup_transfer(spi, first);
++
++ status = bcm63xx_txrx_bufs(spi, first, n_transfers);
++ if (status < 0)
++ goto exit;
++
++ m->actual_length += status;
++ first = NULL;
++ status = 0;
++ n_transfers = 0;
++ total_len = 0;
++ can_use_prepend = false;
++ }
+ }
++
+ exit:
+ m->status = status;
+ spi_finalize_current_message(master);
diff --git a/target/linux/brcm63xx/patches-3.3/404-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.3/404-bcm963xx_flashmap.patch
index 8338962e5..8f91623c8 100644
--- a/target/linux/brcm63xx/patches-3.3/404-bcm963xx_flashmap.patch
+++ b/target/linux/brcm63xx/patches-3.3/404-bcm963xx_flashmap.patch
@@ -23,7 +23,7 @@ Signed-off-by: Axel Gembe <ago@bastart.eu.org>
.width = 2,
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
-@@ -75,6 +75,7 @@ static int parse_redboot_partitions(stru
+@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
int nulllen = 0;
int numslots;
unsigned long offset;
@@ -31,7 +31,7 @@ Signed-off-by: Axel Gembe <ago@bastart.eu.org>
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
static char nullstring[] = "unallocated";
#endif
-@@ -181,6 +182,16 @@ static int parse_redboot_partitions(stru
+@@ -178,6 +179,16 @@ static int parse_redboot_partitions(stru
goto out;
}
@@ -48,7 +48,7 @@ Signed-off-by: Axel Gembe <ago@bastart.eu.org>
for (i = 0; i < numslots; i++) {
struct fis_list *new_fl, **prev;
-@@ -201,10 +212,10 @@ static int parse_redboot_partitions(stru
+@@ -198,10 +209,10 @@ static int parse_redboot_partitions(stru
goto out;
}
new_fl->img = &buf[i];