1 files changed, 71 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
new file mode 100755
index 000000000..d492cd553
--- /dev/null
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -0,0 +1,71 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+#
+
+. /lib/brcm63xx.sh
+
+led_set_attr() {
+	[ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
+}
+
+status_led_set_timer() {
+	led_set_attr $status_led "trigger" "timer"
+	led_set_attr $status_led "delay_on" "$1"
+	led_set_attr $status_led "delay_off" "$2"
+	[ -n "$status_led2" ] && {
+		led_set_attr $status_led2 "trigger" "timer"
+		led_set_attr $status_led2 "delay_on" "$1"
+		led_set_attr $status_led2 "delay_off" "$2"
+	}
+}
+
+status_led_set_morse() {
+	led_set_attr $status_led "trigger" "morse"
+	led_set_attr $status_led "delay" "$1"
+	led_set_attr $status_led "message" "$2"
+	[ -n "$status_led2" ] && {
+		led_set_attr $status_led2 "trigger" "morse"
+		led_set_attr $status_led2 "delay" "$1"
+		led_set_attr $status_led2 "message" "$2"
+	}
+}
+
+status_led_on() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 255
+	[ -n "$status_led2" ] && {
+		led_set_attr $status_led2 "trigger" "none"
+		led_set_attr $status_led2 "brightness" 255
+	}
+}
+
+status_led_off() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 0
+	[ -n "$status_led2" ] && {
+		led_set_attr $status_led2 "trigger" "none"
+		led_set_attr $status_led2 "brightness" 0
+	}
+}
+
+set_state() {
+	case "$1" in
+	preinit)
+		insmod leds-gpio
+		status_led_on
+		status_led_set_timer 200 200
+		;;
+	failsafe)
+		status_led_set_timer 50 50
+		;;
+	done)
+		if [ "${status_led/power}" != "$status_led" ]; then
+			status_led_on
+		else
+			status_led_off
+		fi
+		;;
+	esac
+}