aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch')
-rw-r--r--target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch573
1 files changed, 573 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch b/target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch
new file mode 100644
index 000000000..ba5a5c2d1
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch
@@ -0,0 +1,573 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -137,6 +137,12 @@ config SSB_DRIVER_MIPS
+
+ If unsure, say N
+
++config SSB_SFLASH
++ bool
++ depends on SSB_DRIVER_MIPS
++ default y
++
++
+ # Assumption: We are on embedded, if we compile the MIPS core.
+ config SSB_EMBEDDED
+ bool
+--- a/drivers/ssb/Makefile
++++ b/drivers/ssb/Makefile
+@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
+ # built-in drivers
+ ssb-y += driver_chipcommon.o
+ ssb-y += driver_chipcommon_pmu.o
++ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
+ ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
+ ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
+ ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
+--- /dev/null
++++ b/drivers/ssb/driver_chipcommon_sflash.c
+@@ -0,0 +1,451 @@
++/*
++ * Broadcom SiliconBackplane chipcommon serial flash interface
++ *
++ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright 2010, Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/ssb/ssb.h>
++#include <linux/ssb/ssb_driver_chipcommon.h>
++#include <linux/delay.h>
++
++#include "ssb_private.h"
++
++#define NUM_RETRIES 3
++
++
++/* Issue a serial flash command */
++static inline void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
++{
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
++ SSB_CHIPCO_FLASHCTL_START | opcode);
++ while (chipco_read32(cc, SSB_CHIPCO_FLASHCTL)
++ & SSB_CHIPCO_FLASHCTL_BUSY)
++ ;
++}
++
++
++static inline void ssb_sflash_write_u8(struct ssb_chipcommon *cc,
++ u32 offset, u8 byte)
++{
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
++ chipco_write32(cc, SSB_CHIPCO_FLASHDATA, byte);
++}
++
++/* Initialize serial flash access */
++int ssb_sflash_init(struct ssb_chipcommon *cc)
++{
++ u32 id, id2;
++
++ memset(&cc->sflash, 0, sizeof(struct ssb_sflash));
++
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ /* Probe for ST chips */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++ cc->sflash.blocksize = 64 * 1024;
++ switch (id) {
++ case 0x11:
++ /* ST M25P20 2 Mbit Serial Flash */
++ cc->sflash.numblocks = 4;
++ break;
++ case 0x12:
++ /* ST M25P40 4 Mbit Serial Flash */
++ cc->sflash.numblocks = 8;
++ break;
++ case 0x13:
++ /* ST M25P80 8 Mbit Serial Flash */
++ cc->sflash.numblocks = 16;
++ break;
++ case 0x14:
++ /* ST M25P16 16 Mbit Serial Flash */
++ cc->sflash.numblocks = 32;
++ break;
++ case 0x15:
++ /* ST M25P32 32 Mbit Serial Flash */
++ cc->sflash.numblocks = 64;
++ break;
++ case 0x16:
++ /* ST M25P64 64 Mbit Serial Flash */
++ cc->sflash.numblocks = 128;
++ break;
++ case 0x17:
++ /* ST M25FL128 128 Mbit Serial Flash */
++ cc->sflash.numblocks = 256;
++ break;
++ case 0xbf:
++ /* All of the following flashes are SST with
++ * 4KB subsectors. Others should be added but
++ * We'll have to revamp the way we identify them
++ * since RES is not eough to disambiguate them.
++ */
++ cc->sflash.blocksize = 4 * 1024;
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++ switch (id2) {
++ case 1:
++ /* SST25WF512 512 Kbit Serial Flash */
++ case 0x48:
++ /* SST25VF512 512 Kbit Serial Flash */
++ cc->sflash.numblocks = 16;
++ break;
++ case 2:
++ /* SST25WF010 1 Mbit Serial Flash */
++ case 0x49:
++ /* SST25VF010 1 Mbit Serial Flash */
++ cc->sflash.numblocks = 32;
++ break;
++ case 3:
++ /* SST25WF020 2 Mbit Serial Flash */
++ case 0x43:
++ /* SST25VF020 2 Mbit Serial Flash */
++ cc->sflash.numblocks = 64;
++ break;
++ case 4:
++ /* SST25WF040 4 Mbit Serial Flash */
++ case 0x44:
++ /* SST25VF040 4 Mbit Serial Flash */
++ case 0x8d:
++ /* SST25VF040B 4 Mbit Serial Flash */
++ cc->sflash.numblocks = 128;
++ break;
++ case 5:
++ /* SST25WF080 8 Mbit Serial Flash */
++ case 0x8e:
++ /* SST25VF080B 8 Mbit Serial Flash */
++ cc->sflash.numblocks = 256;
++ break;
++ case 0x41:
++ /* SST25VF016 16 Mbit Serial Flash */
++ cc->sflash.numblocks = 512;
++ break;
++ case 0x4a:
++ /* SST25VF032 32 Mbit Serial Flash */
++ cc->sflash.numblocks = 1024;
++ break;
++ case 0x4b:
++ /* SST25VF064 64 Mbit Serial Flash */
++ cc->sflash.numblocks = 2048;
++ break;
++ }
++ break;
++ }
++ break;
++
++ case SSB_CHIPCO_FLASHT_ATSER:
++ /* Probe for Atmel chips */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
++ switch (id) {
++ case 0xc:
++ /* Atmel AT45DB011 1Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 512;
++ break;
++ case 0x14:
++ /* Atmel AT45DB021 2Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 1024;
++ break;
++ case 0x1c:
++ /* Atmel AT45DB041 4Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 2048;
++ break;
++ case 0x24:
++ /* Atmel AT45DB081 8Mbit Serial Flash */
++ cc->sflash.blocksize = 256;
++ cc->sflash.numblocks = 4096;
++ break;
++ case 0x2c:
++ /* Atmel AT45DB161 16Mbit Serial Flash */
++ cc->sflash.blocksize = 512;
++ cc->sflash.numblocks = 4096;
++ break;
++ case 0x34:
++ /* Atmel AT45DB321 32Mbit Serial Flash */
++ cc->sflash.blocksize = 512;
++ cc->sflash.numblocks = 8192;
++ break;
++ case 0x3c:
++ /* Atmel AT45DB642 64Mbit Serial Flash */
++ cc->sflash.blocksize = 1024;
++ cc->sflash.numblocks = 8192;
++ break;
++ }
++ break;
++ }
++
++ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
++
++ return cc->sflash.size ? 0 : -ENODEV;
++}
++
++/* Read len bytes starting at offset into buf. Returns number of bytes read. */
++int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len, u8 *buf)
++{
++ u8 *from, *to;
++ u32 cnt, i;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > cc->sflash.size)
++ return -EINVAL;
++
++ if ((len >= 4) && (offset & 3))
++ cnt = 4 - (offset & 3);
++ else if ((len >= 4) && ((u32)buf & 3))
++ cnt = 4 - ((u32)buf & 3);
++ else
++ cnt = len;
++
++
++ if (cc->dev->id.revision == 12)
++ from = (u8 *)KSEG1ADDR(SSB_FLASH2 + offset);
++ else
++ from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset);
++
++ to = (u8 *)buf;
++
++ if (cnt < 4) {
++ for (i = 0; i < cnt; i++) {
++ *to = readb(from);
++ from++;
++ to++;
++ }
++ return cnt;
++ }
++
++ while (cnt >= 4) {
++ *(u32 *)to = readl(from);
++ from += 4;
++ to += 4;
++ cnt -= 4;
++ }
++
++ return len - cnt;
++}
++
++/* Poll for command completion. Returns zero when complete. */
++int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset)
++{
++ if (offset >= cc->sflash.size)
++ return -22;
++
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ /* Check for ST Write In Progress bit */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RDSR);
++ return chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
++ & SSB_CHIPCO_FLASHSTA_ST_WIP;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ /* Check for Atmel Ready bit */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++ return !(chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
++ & SSB_CHIPCO_FLASHSTA_AT_READY);
++ }
++
++ return 0;
++}
++
++
++static int sflash_st_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++ int ret = 0;
++ bool is4712b0 = (bus->chip_id == 0x4712) && (bus->chip_rev == 3);
++ u32 mask;
++
++ /* Enable writes */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
++ if (is4712b0) {
++ mask = 1 << 14;
++ ssb_sflash_write_u8(cc, offset, *buf++);
++ /* Set chip select */
++ chipco_set32(cc, SSB_CHIPCO_GPIOOUT, mask);
++ /* Issue a page program with the first byte */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
++ ret = 1;
++ offset++;
++ len--;
++ while (len > 0) {
++ if ((offset & 255) == 0) {
++ /* Page boundary, drop cs and return */
++ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
++ udelay(1);
++ if (!ssb_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ return ret;
++ } else {
++ /* Write single byte */
++ ssb_sflash_cmd(cc, *buf++);
++ }
++ ret++;
++ offset++;
++ len--;
++ }
++ /* All done, drop cs */
++ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
++ udelay(1);
++ if (!ssb_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ } else if (cc->dev->id.revision >= 20) {
++ ssb_sflash_write_u8(cc, offset, *buf++);
++ /* Issue a page program with CSA bit set */
++ ssb_sflash_cmd(cc,
++ SSB_CHIPCO_FLASHCTL_ST_CSA |
++ SSB_CHIPCO_FLASHCTL_ST_PP);
++ ret = 1;
++ offset++;
++ len--;
++ while (len > 0) {
++ if ((offset & 255) == 0) {
++ /* Page boundary, poll droping cs and return */
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
++ udelay(1);
++ if (!ssb_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ return ret;
++ } else {
++ /* Write single byte */
++ ssb_sflash_cmd(cc,
++ SSB_CHIPCO_FLASHCTL_ST_CSA |
++ *buf++);
++ }
++ ret++;
++ offset++;
++ len--;
++ }
++ /* All done, drop cs & poll */
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
++ udelay(1);
++ if (!ssb_sflash_poll(cc, offset)) {
++ /* Flash rejected command */
++ return -EAGAIN;
++ }
++ } else {
++ ret = 1;
++ ssb_sflash_write_u8(cc, offset, *buf);
++ /* Page program */
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
++ }
++ return ret;
++}
++
++static int sflash_at_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct ssb_sflash *sfl = &cc->sflash;
++ u32 page, byte, mask;
++ int ret = 0;
++ mask = sfl->blocksize - 1;
++ page = (offset & ~mask) << 1;
++ byte = offset & mask;
++ /* Read main memory page into buffer 1 */
++ if (byte || (len < sfl->blocksize)) {
++ int i = 100;
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
++ /* 250 us for AT45DB321B */
++ while (i > 0 && ssb_sflash_poll(cc, offset)) {
++ udelay(10);
++ i--;
++ }
++ BUG_ON(!ssb_sflash_poll(cc, offset));
++ }
++ /* Write into buffer 1 */
++ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
++ ssb_sflash_write_u8(cc, byte++, *buf++);
++ ssb_sflash_cmd(cc,
++ SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
++ }
++ /* Write buffer 1 into main memory page */
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
++
++ return ret;
++}
++
++/* Write len bytes starting at offset into buf. Returns number of bytes
++ * written. Caller should poll for completion.
++ */
++int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf)
++{
++ struct ssb_sflash *sfl;
++ int ret = 0, tries = NUM_RETRIES;
++
++ if (!len)
++ return 0;
++
++ if ((offset + len) > cc->sflash.size)
++ return -EINVAL;
++
++ sfl = &cc->sflash;
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ do {
++ ret = sflash_st_write(cc, offset, len, buf);
++ tries--;
++ } while (ret == -EAGAIN && tries > 0);
++
++ if (ret == -EAGAIN && tries == 0) {
++ pr_info("ST Flash rejected write\n");
++ ret = -EIO;
++ }
++ break;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ ret = sflash_at_write(cc, offset, len, buf);
++ break;
++ }
++
++ return ret;
++}
++
++/* Erase a region. Returns number of bytes scheduled for erasure.
++ * Caller should poll for completion.
++ */
++int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset)
++{
++ struct ssb_sflash *sfl;
++
++ if (offset >= cc->sflash.size)
++ return -EINVAL;
++
++ sfl = &cc->sflash;
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
++ /* Newer flashes have "sub-sectors" which can be erased
++ * independently with a new command: ST_SSE. The ST_SE command
++ * erases 64KB just as before.
++ */
++ if (sfl->blocksize < (64 * 1024))
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_SSE);
++ else
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_SE);
++ return sfl->blocksize;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset << 1);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
++ return sfl->blocksize;
++ }
++
++ return 0;
++}
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -203,7 +203,13 @@ static void ssb_mips_flash_detect(struct
+ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ case SSB_CHIPCO_FLASHT_ATSER:
++#ifdef CONFIG_SSB_SFLASH
++ pr_info("found serial flash.\n");
++ bus->chipco.flash_type = SSB_SFLASH;
++ ssb_sflash_init(&bus->chipco);
++#else
+ pr_info("serial flash not supported.\n");
++#endif /* CONFIG_SSB_SFLASH */
+ break;
+ case SSB_CHIPCO_FLASHT_PARA:
+ pr_info("found parallel flash.\n");
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -192,6 +192,10 @@ extern int ssb_devices_freeze(struct ssb
+ extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
+
+
++#ifdef CONFIG_SSB_SFLASH
++/* driver_chipcommon_sflash.c */
++int ssb_sflash_init(struct ssb_chipcommon *cc);
++#endif /* CONFIG_SSB_SFLASH */
+
+ /* b43_pci_bridge.c */
+ #ifdef CONFIG_SSB_B43_PCI_BRIDGE
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -503,8 +503,10 @@
+ #define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
+ #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
+-#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
+-#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */
++#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
++#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
+
+ /* Status register bits for ST flashes */
+ #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
+@@ -585,6 +587,7 @@ struct ssb_chipcommon_pmu {
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ enum ssb_flash_type {
+ SSB_PFLASH,
++ SSB_SFLASH,
+ };
+
+ struct ssb_pflash {
+@@ -592,6 +595,14 @@ struct ssb_pflash {
+ u32 window;
+ u32 window_size;
+ };
++
++#ifdef CONFIG_SSB_SFLASH
++struct ssb_sflash {
++ u32 blocksize; /* Block size */
++ u32 numblocks; /* Number of blocks */
++ u32 size; /* Total size in bytes */
++};
++#endif /* CONFIG_SSB_SFLASH */
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+
+ struct ssb_chipcommon {
+@@ -605,6 +616,9 @@ struct ssb_chipcommon {
+ enum ssb_flash_type flash_type;
+ union {
+ struct ssb_pflash pflash;
++#ifdef CONFIG_SSB_SFLASH
++ struct ssb_sflash sflash;
++#endif /* CONFIG_SSB_SFLASH */
+ };
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+ };
+@@ -666,6 +680,16 @@ extern int ssb_chipco_serial_init(struct
+ struct ssb_serial_port *ports);
+ #endif /* CONFIG_SSB_SERIAL */
+
++#ifdef CONFIG_SSB_SFLASH
++/* Chipcommon sflash support. */
++int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ u8 *buf);
++int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset);
++int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
++ const u8 *buf);
++int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset);
++#endif /* CONFIG_SSB_SFLASH */
++
+ /* PMU support */
+ extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-05 23:29:53 +0000