diff options
Diffstat (limited to 'target/linux/atheros/base-files')
6 files changed, 214 insertions, 0 deletions
diff --git a/target/linux/atheros/base-files/etc/config/system b/target/linux/atheros/base-files/etc/config/system new file mode 100644 index 000000000..1d29ad8c3 --- /dev/null +++ b/target/linux/atheros/base-files/etc/config/system @@ -0,0 +1,23 @@ +config system + option hostname OpenWrt + option timezone UTC + +config timeserver ntp + list server 0.openwrt.pool.ntp.org + list server 1.openwrt.pool.ntp.org + list server 2.openwrt.pool.ntp.org + list server 3.openwrt.pool.ntp.org + +config button + option button reset + option action released + option handler "logger reboot" + option min 0 + option max 4 + +config button + option button reset + option action released + option handler "logger factory default" + option min 5 + option max 30 diff --git a/target/linux/atheros/base-files/etc/hotplug.d/button/00-button b/target/linux/atheros/base-files/etc/hotplug.d/button/00-button new file mode 100644 index 000000000..857a59b4a --- /dev/null +++ b/target/linux/atheros/base-files/etc/hotplug.d/button/00-button @@ -0,0 +1,24 @@ +. /etc/functions.sh +do_button () { + local button + local action + local handler + local min + local max + + config_get button $1 button + config_get action $1 action + config_get handler $1 handler + config_get min $1 min + config_get max $1 max + + [ "$ACTION" = "$action" -a "$BUTTON" = "$button" -a -n "$handler" ] && { + [ -z "$min" -o -z "$max" ] && eval $handler + [ -n "$min" -a -n "$max" ] && { + [ $min -le $SEEN -a $max -ge $SEEN ] && eval $handler + } + } +} + +config_load system +config_foreach do_button button diff --git a/target/linux/atheros/base-files/etc/uci-defaults/leds b/target/linux/atheros/base-files/etc/uci-defaults/leds new file mode 100644 index 000000000..076a04bfd --- /dev/null +++ b/target/linux/atheros/base-files/etc/uci-defaults/leds @@ -0,0 +1,11 @@ +#!/bin/sh +# Copyright 2012 OpenWrt.org +# + +. /lib/functions/uci-defaults.sh + +ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0" + +ucidef_commit_leds + +exit 0 diff --git a/target/linux/atheros/base-files/etc/uci-defaults/network b/target/linux/atheros/base-files/etc/uci-defaults/network new file mode 100644 index 000000000..7e91e6ac2 --- /dev/null +++ b/target/linux/atheros/base-files/etc/uci-defaults/network @@ -0,0 +1,45 @@ +#!/bin/sh +if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \ + [ -x /sbin/swconfig ]; +then + uci batch <<EOF +set network.eth0=switch +set network.eth0.name=eth0 +set network.eth0.reset=1 +set network.eth0.enable_vlan=1 +set network.eth0_1=switch_vlan +set network.eth0_1.device=eth0 +set network.eth0_1.vlan=1 +set network.eth0_1.ports="0 1 2 3 5t" +set network.eth0_2=switch_vlan +set network.eth0_2.device=eth0 +set network.eth0_2.vlan=2 +set network.eth0_2.ports="4 5t" +EOF + HAS_SWITCH=1 +fi + +if [ -n "$HAS_SWITCH" -o \ + -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then + uci batch <<EOF +set network.lan.ifname=eth0.1 +set network.wan=interface +set network.wan.ifname=eth0.2 +set network.wan.proto=dhcp +commit network +EOF + HAS_SWITCH=1 +fi + +[ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && { + uci batch <<EOF +set network.wan=interface +set network.wan.ifname=eth1 +set network.wan.proto=dhcp +commit network +EOF +} + +uci commit network diff --git a/target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros b/target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros new file mode 100644 index 000000000..434103e17 --- /dev/null +++ b/target/linux/atheros/base-files/lib/preinit/15_preinit_iface_atheros @@ -0,0 +1,35 @@ +#!/bin/sh + +# reset button only supported on ar5315+ at the moment +preinit_ip() { + if [ -z "$pi_ifname" ]; then + grep -q 'Atheros AR231[567]' /proc/cpuinfo && { + if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then + vconfig set_name_type DEV_PLUS_VID_NO_PAD + ifconfig eth0 up + vconfig add eth0 1 + ifname=eth0.1 + else + ifname=eth0 + fi + pi_ifname=$ifname + } + fi + [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { + ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up + } +} + + +# reset button only supported on ar5315+ at the moment + +preinit_ip_deconfig() { + if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then + vconfig rem eth0.1 2>/dev/null + ifconfig $pi_ifname down + elif [ -n "$pi_ifname" ]; then + ifconfig $pi_ifname 0.0.0.0 + fi +} diff --git a/target/linux/atheros/base-files/lib/upgrade/platform.sh b/target/linux/atheros/base-files/lib/upgrade/platform.sh new file mode 100644 index 000000000..d4daaacb9 --- /dev/null +++ b/target/linux/atheros/base-files/lib/upgrade/platform.sh @@ -0,0 +1,76 @@ +CI_BLKSZ=65536 +CI_LDADR=0x80041000 + +platform_find_partitions() { + local first dev size erasesize name + while read dev size erasesize name; do + name=${name#'"'}; name=${name%'"'} + case "$name" in + vmlinux.bin.l7|kernel|linux|rootfs) + if [ -z "$first" ]; then + first="$name" + else + echo "$erasesize:$first:$name" + break + fi + ;; + esac + done < /proc/mtd +} + +platform_find_kernelpart() { + local part + for part in "${1%:*}" "${1#*:}"; do + case "$part" in + vmlinux.bin.l7|kernel|linux) + echo "$part" + break + ;; + esac + done +} + +platform_check_image() { + [ "$ARGC" -gt 1 ] && return 1 + + case "$(get_magic_word "$1")" in + # Combined Image + 4349) + local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null) + local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}" + + if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then + return 0 + else + echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)" + return 1 + fi + ;; + *) + echo "Invalid image. Use combined .img files on this platform" + return 1 + ;; + esac +} + +platform_do_upgrade() { + local partitions=$(platform_find_partitions) + local kernelpart=$(platform_find_kernelpart "${partitions#*:}") + local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}" + local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null) + local kern_blocks=$(($kern_length / $CI_BLKSZ)) + local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ)) + + if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \ + [ ${kern_blocks:-0} -gt 0 ] && \ + [ ${root_blocks:-0} -gt ${kern_blocks:-0} ] && \ + [ ${erase_size:-0} -gt 0 ]; + then + local append="" + [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR" + + ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \ + dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \ + mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions + fi +} |