diff options
Diffstat (limited to 'target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch')
| -rw-r--r-- | target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch | 29 |
1 files changed, 21 insertions, 8 deletions
diff --git a/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch index 6f6da2d30..2fc30cdd0 100644 --- a/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,18 +16,98 @@ +@@ -16,18 +16,101 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -33,6 +33,7 @@ + ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ + ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ + ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ ++ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ + ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ + ATH79_MACH_OM2P, /* OpenMesh OM2P */ + ATH79_MACH_PB42, /* Atheros PB42 */ @@ -57,6 +58,7 @@ + ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ + ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ + ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ ++ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */ + ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ + ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ + ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ @@ -70,6 +72,7 @@ + ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/ + ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ + ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ ++ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */ + ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ @@ -202,7 +205,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX -@@ -67,6 +147,447 @@ config ATH79_MACH_PB44 +@@ -67,6 +147,456 @@ config ATH79_MACH_PB44 Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -471,7 +474,7 @@ + select ATH79_DEV_M25P80 + +config ATH79_MACH_TL_MR11U -+ bool "TP-LINK TL-MR11U support" ++ bool "TP-LINK TL-MR11U/TL-MR3040 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS @@ -566,6 +569,15 @@ + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + ++config ATH79_MACH_TL_WR841N_V8 ++ bool "TP-LINK TL-WR841N/ND v8 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ +config ATH79_MACH_TL_WR941ND + bool "TP-LINK TL-WR941ND support" + select SOC_AR913X @@ -650,7 +662,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM (rev 1.0) board" select SOC_AR724X -@@ -80,6 +601,24 @@ config ATH79_MACH_UBNT_XM +@@ -80,6 +610,24 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -675,7 +687,7 @@ endmenu config SOC_AR71XX -@@ -115,10 +654,6 @@ config SOC_QCA955X +@@ -115,10 +663,6 @@ config SOC_QCA955X select PCI_AR724X if PCI def_bool n @@ -686,7 +698,7 @@ config ATH79_DEV_AP9X_PCI select ATH79_PCI_ATH9K_FIXUP def_bool n -@@ -129,7 +664,14 @@ config ATH79_DEV_DSA +@@ -129,7 +673,14 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -702,7 +714,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -161,4 +703,7 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -161,4 +712,7 @@ config ATH79_PCI_ATH9K_FIXUP config ATH79_ROUTERBOOT def_bool n @@ -712,7 +724,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,65 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,66 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -759,6 +771,7 @@ +obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o +obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o +obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o ++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o +obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o +obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o |