diff options
Diffstat (limited to 'target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch')
| -rw-r--r-- | target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch | 175 |
1 files changed, 175 insertions, 0 deletions
diff --git a/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch new file mode 100644 index 000000000..bd07c7bc8 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch @@ -0,0 +1,175 @@ +--- a/arch/mips/ath79/mach-ap136.c ++++ b/arch/mips/ath79/mach-ap136.c +@@ -1,5 +1,5 @@ + /* +- * Qualcomm Atheros AP136 reference board support ++ * Atheros AP136 reference board support + * + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> +@@ -18,23 +18,27 @@ + * + */ + +-#include <linux/pci.h> +-#include <linux/ath9k_platform.h> ++#include <linux/platform_device.h> ++#include <linux/ar8216_platform.h> + +-#include "machtypes.h" ++#include <asm/mach-ath79/ar71xx_regs.h> ++ ++#include "common.h" ++#include "dev-ap9x-pci.h" + #include "dev-gpio-buttons.h" ++#include "dev-eth.h" + #include "dev-leds-gpio.h" +-#include "dev-spi.h" ++#include "dev-m25p80.h" + #include "dev-usb.h" + #include "dev-wmac.h" +-#include "pci.h" ++#include "machtypes.h" + +-#define AP136_GPIO_LED_STATUS_RED 14 +-#define AP136_GPIO_LED_STATUS_GREEN 19 + #define AP136_GPIO_LED_USB 4 +-#define AP136_GPIO_LED_WLAN_2G 13 + #define AP136_GPIO_LED_WLAN_5G 12 ++#define AP136_GPIO_LED_WLAN_2G 13 ++#define AP136_GPIO_LED_STATUS_RED 14 + #define AP136_GPIO_LED_WPS_RED 15 ++#define AP136_GPIO_LED_STATUS_GREEN 19 + #define AP136_GPIO_LED_WPS_GREEN 20 + + #define AP136_GPIO_BTN_WPS 16 +@@ -43,8 +47,10 @@ + #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ + #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) + +-#define AP136_WMAC_CALDATA_OFFSET 0x1000 +-#define AP136_PCIE_CALDATA_OFFSET 0x5000 ++#define AP136_MAC0_OFFSET 0 ++#define AP136_MAC1_OFFSET 6 ++#define AP136_WMAC_CALDATA_OFFSET 0x1000 ++#define AP136_PCIE_CALDATA_OFFSET 0x5000 + + static struct gpio_led ap136_leds_gpio[] __initdata = { + { +@@ -98,63 +104,82 @@ static struct gpio_keys_button ap136_gpi + }, + }; + +-static struct ath79_spi_controller_data ap136_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, ++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg = { ++ .mode = AR8327_PAD_MAC_RGMII, ++ .txclk_delay_en = true, ++ .rxclk_delay_en = true, ++ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, ++ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, + }; + +-static struct spi_board_info ap136_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l6405d", +- .controller_data = &ap136_spi0_data, ++static struct ar8327_platform_data ap136_ar8327_data = { ++ .pad0_cfg = &ap136_ar8327_pad0_cfg, ++ .cpuport_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, + } + }; + +-static struct ath79_spi_platform_data ap136_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, ++static struct mdio_board_info ap136_mdio0_info[] = { ++ { ++ .bus_id = "ag71xx-mdio.0", ++ .phy_addr = 0, ++ .platform_data = &ap136_ar8327_data, ++ }, + }; + +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ap136_ath9k_data; +- +-static int ap136_pci_plat_dev_init(struct pci_dev *dev) ++static void __init ap136_gmac_setup(void) + { +- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) +- dev->dev.platform_data = &ap136_ath9k_data; ++ void __iomem *base; ++ u32 t; + +- return 0; +-} ++ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); + +-static void __init ap136_pci_init(u8 *eeprom) +-{ +- memcpy(ap136_ath9k_data.eeprom_data, eeprom, +- sizeof(ap136_ath9k_data.eeprom_data)); ++ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); ++ ++ t &= ~(QCA955X_ETH_CFG_RGMII_GMAC0 | QCA955X_ETH_CFG_SGMII_GMAC0); ++ t |= QCA955X_ETH_CFG_RGMII_GMAC0; + +- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); +- ath79_register_pci(); ++ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); ++ ++ iounmap(base); + } +-#else +-static inline void ap136_pci_init(void) {} +-#endif /* CONFIG_PCI */ + + static void __init ap136_setup(void) + { + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + ++ ath79_register_m25p80(NULL); ++ + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), + ap136_leds_gpio); + ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap136_gpio_keys), + ap136_gpio_keys); +- ath79_register_spi(&ap136_spi_data, ap136_spi_info, +- ARRAY_SIZE(ap136_spi_info)); ++ + ath79_register_usb(); +- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); +- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); ++ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL); ++ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); ++ ++ ap136_gmac_setup(); ++ ++ ath79_register_mdio(0, 0x0); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0); ++ ++ mdiobus_register_board_info(ap136_mdio0_info, ++ ARRAY_SIZE(ap136_mdio0_info)); ++ ++ /* GMAC0 is connected to an AR8327 switch */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ath79_eth0_pll_data.pll_1000 = 0x06000000; ++ ++ ath79_register_eth(0); + } + + MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board", |