diff options
Diffstat (limited to 'target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c')
| -rw-r--r-- | target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c new file mode 100644 index 000000000..251e18220 --- /dev/null +++ b/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c @@ -0,0 +1,367 @@ +/* + * NAND flash driver for the MikroTik RouterBOARD 750 + * + * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/mach-rb750.h> + +#define DRV_NAME "rb750-nand" +#define DRV_VERSION "0.1.0" +#define DRV_DESC "NAND flash driver for the RouterBOARD 750" + +#define RB750_NAND_IO0 BIT(RB750_GPIO_NAND_IO0) +#define RB750_NAND_ALE BIT(RB750_GPIO_NAND_ALE) +#define RB750_NAND_CLE BIT(RB750_GPIO_NAND_CLE) +#define RB750_NAND_NRE BIT(RB750_GPIO_NAND_NRE) +#define RB750_NAND_NWE BIT(RB750_GPIO_NAND_NWE) +#define RB750_NAND_RDY BIT(RB750_GPIO_NAND_RDY) + +#define RB750_NAND_DATA_SHIFT 1 +#define RB750_NAND_DATA_BITS (0xff << RB750_NAND_DATA_SHIFT) +#define RB750_NAND_INPUT_BITS (RB750_NAND_DATA_BITS | RB750_NAND_RDY) +#define RB750_NAND_OUTPUT_BITS (RB750_NAND_ALE | RB750_NAND_CLE | \ + RB750_NAND_NRE | RB750_NAND_NWE) + +struct rb750_nand_info { + struct nand_chip chip; + struct mtd_info mtd; + struct rb7xx_nand_platform_data *pdata; +}; + +static inline struct rb750_nand_info *mtd_to_rbinfo(struct mtd_info *mtd) +{ + return container_of(mtd, struct rb750_nand_info, mtd); +} + +/* + * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader + * will not be able to find the kernel that we load. + */ +static struct nand_ecclayout rb750_nand_ecclayout = { + .eccbytes = 6, + .eccpos = { 8, 9, 10, 13, 14, 15 }, + .oobavail = 9, + .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } +}; + +static struct mtd_partition rb750_nand_partitions[] = { + { + .name = "booter", + .offset = 0, + .size = (256 * 1024), + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = (256 * 1024), + .size = (4 * 1024 * 1024) - (256 * 1024), + }, { + .name = "rootfs", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + }, +}; + +static void rb750_nand_write(const u8 *buf, unsigned len) +{ + void __iomem *base = ath79_gpio_base; + u32 out; + u32 t; + unsigned i; + + /* set data lines to output mode */ + t = __raw_readl(base + AR71XX_GPIO_REG_OE); + __raw_writel(t | RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE); + + out = __raw_readl(base + AR71XX_GPIO_REG_OUT); + out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE); + for (i = 0; i != len; i++) { + u32 data; + + data = buf[i]; + data <<= RB750_NAND_DATA_SHIFT; + data |= out; + __raw_writel(data, base + AR71XX_GPIO_REG_OUT); + + __raw_writel(data | RB750_NAND_NWE, base + AR71XX_GPIO_REG_OUT); + /* flush write */ + __raw_readl(base + AR71XX_GPIO_REG_OUT); + } + + /* set data lines to input mode */ + t = __raw_readl(base + AR71XX_GPIO_REG_OE); + __raw_writel(t & ~RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE); + /* flush write */ + __raw_readl(base + AR71XX_GPIO_REG_OE); +} + +static int rb750_nand_read_verify(u8 *read_buf, unsigned len, + const u8 *verify_buf) +{ + void __iomem *base = ath79_gpio_base; + unsigned i; + + for (i = 0; i < len; i++) { + u8 data; + + /* activate RE line */ + __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_CLEAR); + /* flush write */ + __raw_readl(base + AR71XX_GPIO_REG_CLEAR); + + /* read input lines */ + data = __raw_readl(base + AR71XX_GPIO_REG_IN) >> + RB750_NAND_DATA_SHIFT; + + /* deactivate RE line */ + __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET); + + if (read_buf) + read_buf[i] = data; + else if (verify_buf && verify_buf[i] != data) + return -EFAULT; + } + + return 0; +} + +static void rb750_nand_select_chip(struct mtd_info *mtd, int chip) +{ + struct rb750_nand_info *rbinfo = mtd_to_rbinfo(mtd); + void __iomem *base = ath79_gpio_base; + u32 t; + + if (chip >= 0) { + rbinfo->pdata->enable_pins(); + + /* set input mode for data lines */ + t = __raw_readl(base + AR71XX_GPIO_REG_OE); + __raw_writel(t & ~RB750_NAND_INPUT_BITS, + base + AR71XX_GPIO_REG_OE); + + /* deactivate RE and WE lines */ + __raw_writel(RB750_NAND_NRE | RB750_NAND_NWE, + base + AR71XX_GPIO_REG_SET); + /* flush write */ + (void) __raw_readl(base + AR71XX_GPIO_REG_SET); + + /* activate CE line */ + __raw_writel(rbinfo->pdata->nce_line, + base + AR71XX_GPIO_REG_CLEAR); + } else { + /* deactivate CE line */ + __raw_writel(rbinfo->pdata->nce_line, + base + AR71XX_GPIO_REG_SET); + /* flush write */ + (void) __raw_readl(base + AR71XX_GPIO_REG_SET); + + t = __raw_readl(base + AR71XX_GPIO_REG_OE); + __raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY, + base + AR71XX_GPIO_REG_OE); + + rbinfo->pdata->disable_pins(); + } +} + +static int rb750_nand_dev_ready(struct mtd_info *mtd) +{ + void __iomem *base = ath79_gpio_base; + + return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY); +} + +static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + if (ctrl & NAND_CTRL_CHANGE) { + void __iomem *base = ath79_gpio_base; + u32 t; + + t = __raw_readl(base + AR71XX_GPIO_REG_OUT); + + t &= ~(RB750_NAND_CLE | RB750_NAND_ALE); + t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0; + t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0; + + __raw_writel(t, base + AR71XX_GPIO_REG_OUT); + /* flush write */ + __raw_readl(base + AR71XX_GPIO_REG_OUT); + } + + if (cmd != NAND_CMD_NONE) { + u8 t = cmd; + rb750_nand_write(&t, 1); + } +} + +static u8 rb750_nand_read_byte(struct mtd_info *mtd) +{ + u8 data = 0; + rb750_nand_read_verify(&data, 1, NULL); + return data; +} + +static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len) +{ + rb750_nand_read_verify(buf, len, NULL); +} + +static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len) +{ + rb750_nand_write(buf, len); +} + +static int rb750_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, int len) +{ + return rb750_nand_read_verify(NULL, len, buf); +} + +static void __init rb750_nand_gpio_init(struct rb750_nand_info *info) +{ + void __iomem *base = ath79_gpio_base; + u32 out; + u32 t; + + out = __raw_readl(base + AR71XX_GPIO_REG_OUT); + + /* setup output levels */ + __raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE, + base + AR71XX_GPIO_REG_SET); + + __raw_writel(RB750_NAND_ALE | RB750_NAND_CLE, + base + AR71XX_GPIO_REG_CLEAR); + + /* setup input lines */ + t = __raw_readl(base + AR71XX_GPIO_REG_OE); + __raw_writel(t & ~(RB750_NAND_INPUT_BITS), base + AR71XX_GPIO_REG_OE); + + /* setup output lines */ + t = __raw_readl(base + AR71XX_GPIO_REG_OE); + t |= RB750_NAND_OUTPUT_BITS; + t |= info->pdata->nce_line; + __raw_writel(t, base + AR71XX_GPIO_REG_OE); + + info->pdata->latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0); +} + +static int __devinit rb750_nand_probe(struct platform_device *pdev) +{ + struct rb750_nand_info *info; + struct rb7xx_nand_platform_data *pdata; + int ret; + + printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); + + pdata = pdev->dev.platform_data; + if (!pdata) + return -EINVAL; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->chip.priv = &info; + info->mtd.priv = &info->chip; + info->mtd.owner = THIS_MODULE; + + info->chip.select_chip = rb750_nand_select_chip; + info->chip.cmd_ctrl = rb750_nand_cmd_ctrl; + info->chip.dev_ready = rb750_nand_dev_ready; + info->chip.read_byte = rb750_nand_read_byte; + info->chip.write_buf = rb750_nand_write_buf; + info->chip.read_buf = rb750_nand_read_buf; + info->chip.verify_buf = rb750_nand_verify_buf; + + info->chip.chip_delay = 25; + info->chip.ecc.mode = NAND_ECC_SOFT; + info->chip.options |= NAND_NO_AUTOINCR; + + info->pdata = pdata; + + platform_set_drvdata(pdev, info); + + rb750_nand_gpio_init(info); + + ret = nand_scan_ident(&info->mtd, 1, NULL); + if (ret) { + ret = -ENXIO; + goto err_free_info; + } + + if (info->mtd.writesize == 512) + info->chip.ecc.layout = &rb750_nand_ecclayout; + + ret = nand_scan_tail(&info->mtd); + if (ret) { + return -ENXIO; + goto err_set_drvdata; + } + + ret = mtd_device_register(&info->mtd, rb750_nand_partitions, + ARRAY_SIZE(rb750_nand_partitions)); + if (ret) + goto err_release_nand; + + return 0; + +err_release_nand: + nand_release(&info->mtd); +err_set_drvdata: + platform_set_drvdata(pdev, NULL); +err_free_info: + kfree(info); + return ret; +} + +static int __devexit rb750_nand_remove(struct platform_device *pdev) +{ + struct rb750_nand_info *info = platform_get_drvdata(pdev); + + nand_release(&info->mtd); + platform_set_drvdata(pdev, NULL); + kfree(info); + + return 0; +} + +static struct platform_driver rb750_nand_driver = { + .probe = rb750_nand_probe, + .remove = __devexit_p(rb750_nand_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init rb750_nand_init(void) +{ + return platform_driver_register(&rb750_nand_driver); +} + +static void __exit rb750_nand_exit(void) +{ + platform_driver_unregister(&rb750_nand_driver); +} + +module_init(rb750_nand_init); +module_exit(rb750_nand_exit); + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_LICENSE("GPL v2"); |