aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c153
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h46
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c36
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h21
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c1029
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h48
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c117
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h17
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c95
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h27
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c154
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c113
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c88
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c85
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c84
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap83.c275
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c142
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c107
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c151
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c133
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c200
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c181
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c144
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c136
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c190
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c95
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c124
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c115
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c220
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c176
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c83
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-pb92.c70
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c271
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c405
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c337
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c100
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c109
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c210
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c163
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c130
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c125
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c146
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c104
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c109
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c204
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c154
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c141
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c156
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c85
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c135
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c130
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c159
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c140
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c121
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c205
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c155
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c114
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c172
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c145
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c107
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c96
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c126
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c161
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c213
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c287
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c177
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c169
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c157
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/nvram.c75
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/nvram.h19
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c123
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h6
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/routerboot.c100
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/routerboot.h26
-rw-r--r--target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h34
-rw-r--r--target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h60
-rw-r--r--target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h84
-rw-r--r--target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h48
78 files changed, 11148 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c
new file mode 100644
index 000000000..c08e43808
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c
@@ -0,0 +1,153 @@
+/*
+ * Atheros AP9X reference board PCI initialization
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "pci-ath9k-fixup.h"
+#include "pci.h"
+
+static struct ath9k_platform_data ap9x_wmac0_data = {
+ .led_pin = -1,
+};
+static struct ath9k_platform_data ap9x_wmac1_data = {
+ .led_pin = -1,
+};
+static char ap9x_wmac0_mac[6];
+static char ap9x_wmac1_mac[6];
+
+__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin)
+{
+ switch (wmac) {
+ case 0:
+ ap9x_wmac0_data.led_pin = pin;
+ break;
+ case 1:
+ ap9x_wmac1_data.led_pin = pin;
+ break;
+ }
+}
+
+__init struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac)
+{
+ switch (wmac) {
+ case 0:
+ return &ap9x_wmac0_data;
+
+ case 1:
+ return &ap9x_wmac1_data;
+ }
+
+ return NULL;
+}
+
+__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val)
+{
+ switch (wmac) {
+ case 0:
+ ap9x_wmac0_data.gpio_mask = mask;
+ ap9x_wmac0_data.gpio_val = val;
+ break;
+ case 1:
+ ap9x_wmac1_data.gpio_mask = mask;
+ ap9x_wmac1_data.gpio_val = val;
+ break;
+ }
+}
+
+__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
+ int num_leds)
+{
+ switch (wmac) {
+ case 0:
+ ap9x_wmac0_data.leds = leds;
+ ap9x_wmac0_data.num_leds = num_leds;
+ break;
+ case 1:
+ ap9x_wmac1_data.leds = leds;
+ ap9x_wmac1_data.num_leds = num_leds;
+ break;
+ }
+}
+
+static int ap91_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 0:
+ dev->dev.platform_data = &ap9x_wmac0_data;
+ break;
+ }
+
+ return 0;
+}
+
+__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr)
+{
+ if (cal_data)
+ memcpy(ap9x_wmac0_data.eeprom_data, cal_data,
+ sizeof(ap9x_wmac0_data.eeprom_data));
+
+ if (mac_addr) {
+ memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac));
+ ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
+ }
+
+ ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init);
+ ath79_register_pci();
+
+ pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data);
+}
+
+static int ap94_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 17:
+ dev->dev.platform_data = &ap9x_wmac0_data;
+ break;
+
+ case 18:
+ dev->dev.platform_data = &ap9x_wmac1_data;
+ break;
+ }
+
+ return 0;
+}
+
+__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1)
+{
+ if (cal_data0)
+ memcpy(ap9x_wmac0_data.eeprom_data, cal_data0,
+ sizeof(ap9x_wmac0_data.eeprom_data));
+
+ if (cal_data1)
+ memcpy(ap9x_wmac1_data.eeprom_data, cal_data1,
+ sizeof(ap9x_wmac1_data.eeprom_data));
+
+ if (mac_addr0) {
+ memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac));
+ ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
+ }
+
+ if (mac_addr1) {
+ memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac));
+ ap9x_wmac1_data.macaddr = ap9x_wmac1_mac;
+ }
+
+ ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init);
+ ath79_register_pci();
+
+ pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data);
+ pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data);
+}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h
new file mode 100644
index 000000000..d56f7136b
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h
@@ -0,0 +1,46 @@
+/*
+ * Atheros AP9X reference board PCI initialization
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_AP9X_PCI_H
+#define _ATH79_DEV_AP9X_PCI_H
+
+struct gpio_led;
+struct ath9k_platform_data;
+
+#if defined(CONFIG_ATH79_DEV_AP9X_PCI)
+void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin);
+void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val);
+void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
+ int num_leds);
+struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac);
+
+void ap91_pci_init(u8 *cal_data, u8 *mac_addr);
+void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1);
+
+#else
+static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {}
+static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac,
+ u32 mask, u32 val) {}
+static inline void ap9x_pci_setup_wmac_leds(unsigned wmac,
+ struct gpio_led *leds,
+ int num_leds) {}
+static inline struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac)
+{
+ return NULL;
+}
+
+static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {}
+static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1) {}
+#endif
+
+#endif /* _ATH79_DEV_AP9X_PCI_H */
+
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c
new file mode 100644
index 000000000..176414738
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c
@@ -0,0 +1,36 @@
+/*
+ * Atheros AR71xx DSA switch device support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-dsa.h"
+
+static struct platform_device ar71xx_dsa_switch_device = {
+ .name = "dsa",
+ .id = 0,
+};
+
+void __init ath79_register_dsa(struct device *netdev,
+ struct device *miidev,
+ struct dsa_platform_data *d)
+{
+ int i;
+
+ d->netdev = netdev;
+ for (i = 0; i < d->nr_chips; i++)
+ d->chip[i].mii_bus = miidev;
+
+ ar71xx_dsa_switch_device.dev.platform_data = d;
+ platform_device_register(&ar71xx_dsa_switch_device);
+}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h
new file mode 100644
index 000000000..3730202e8
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h
@@ -0,0 +1,21 @@
+/*
+ * Atheros AR71xx DSA switch device support
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_DSA_H
+#define _ATH79_DEV_DSA_H
+
+#include <net/dsa.h>
+
+void ath79_register_dsa(struct device *netdev,
+ struct device *miidev,
+ struct dsa_platform_data *d);
+
+#endif /* _ATH79_DEV_DSA_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
new file mode 100644
index 000000000..4487958bc
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
@@ -0,0 +1,1029 @@
+/*
+ * Atheros AR71xx SoC platform devices
+ *
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Parts of this file are based on Atheros 2.6.15 BSP
+ * Parts of this file are based on Atheros 2.6.31 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/irq.h>
+
+#include "common.h"
+#include "dev-eth.h"
+
+unsigned char ath79_mac_base[ETH_ALEN] __initdata;
+
+static struct resource ath79_mdio0_resources[] = {
+ {
+ .name = "mdio_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE0_BASE,
+ .end = AR71XX_GE0_BASE + 0x200 - 1,
+ }
+};
+
+static struct ag71xx_mdio_platform_data ath79_mdio0_data;
+
+struct platform_device ath79_mdio0_device = {
+ .name = "ag71xx-mdio",
+ .id = 0,
+ .resource = ath79_mdio0_resources,
+ .num_resources = ARRAY_SIZE(ath79_mdio0_resources),
+ .dev = {
+ .platform_data = &ath79_mdio0_data,
+ },
+};
+
+static struct resource ath79_mdio1_resources[] = {
+ {
+ .name = "mdio_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE1_BASE,
+ .end = AR71XX_GE1_BASE + 0x200 - 1,
+ }
+};
+
+static struct ag71xx_mdio_platform_data ath79_mdio1_data;
+
+struct platform_device ath79_mdio1_device = {
+ .name = "ag71xx-mdio",
+ .id = 1,
+ .resource = ath79_mdio1_resources,
+ .num_resources = ARRAY_SIZE(ath79_mdio1_resources),
+ .dev = {
+ .platform_data = &ath79_mdio1_data,
+ },
+};
+
+static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+
+ t = __raw_readl(base + cfg_reg);
+ t &= ~(3 << shift);
+ t |= (2 << shift);
+ __raw_writel(t, base + cfg_reg);
+ udelay(100);
+
+ __raw_writel(pll_val, base + pll_reg);
+
+ t |= (3 << shift);
+ __raw_writel(t, base + cfg_reg);
+ udelay(100);
+
+ t &= ~(3 << shift);
+ __raw_writel(t, base + cfg_reg);
+ udelay(100);
+
+ printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
+ (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
+
+ iounmap(base);
+}
+
+static void __init ath79_mii_ctrl_set_if(unsigned int reg,
+ unsigned int mii_if)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
+
+ t = __raw_readl(base + reg);
+ t &= ~(AR71XX_MII_CTRL_IF_MASK);
+ t |= (mii_if & AR71XX_MII_CTRL_IF_MASK);
+ __raw_writel(t, base + reg);
+
+ iounmap(base);
+}
+
+static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed)
+{
+ void __iomem *base;
+ unsigned int mii_speed;
+ u32 t;
+
+ switch (speed) {
+ case SPEED_10:
+ mii_speed = AR71XX_MII_CTRL_SPEED_10;
+ break;
+ case SPEED_100:
+ mii_speed = AR71XX_MII_CTRL_SPEED_100;
+ break;
+ case SPEED_1000:
+ mii_speed = AR71XX_MII_CTRL_SPEED_1000;
+ break;
+ default:
+ BUG();
+ }
+
+ base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
+
+ t = __raw_readl(base + reg);
+ t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT);
+ t |= mii_speed << AR71XX_MII_CTRL_SPEED_SHIFT;
+ __raw_writel(t, base + reg);
+
+ iounmap(base);
+}
+
+static unsigned long ar934x_get_mdio_ref_clock(void)
+{
+ void __iomem *base;
+ unsigned long ret;
+ u32 t;
+
+ base = ioremap(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+
+ ret = 0;
+ t = __raw_readl(base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
+ if (t & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) {
+ ret = 100 * 1000 * 1000;
+ } else {
+ struct clk *clk;
+
+ clk = clk_get(NULL, "ref");
+ if (!IS_ERR(clk))
+ ret = clk_get_rate(clk);
+ }
+
+ iounmap(base);
+
+ return ret;
+}
+
+void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
+{
+ struct platform_device *mdio_dev;
+ struct ag71xx_mdio_platform_data *mdio_data;
+ unsigned int max_id;
+
+ if (ath79_soc == ATH79_SOC_AR9341 ||
+ ath79_soc == ATH79_SOC_AR9342 ||
+ ath79_soc == ATH79_SOC_AR9344 ||
+ ath79_soc == ATH79_SOC_QCA9558)
+ max_id = 1;
+ else
+ max_id = 0;
+
+ if (id > max_id) {
+ printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id);
+ return;
+ }
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ mdio_dev = &ath79_mdio1_device;
+ mdio_data = &ath79_mdio1_data;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9558:
+ if (id == 0) {
+ mdio_dev = &ath79_mdio0_device;
+ mdio_data = &ath79_mdio0_data;
+ } else {
+ mdio_dev = &ath79_mdio1_device;
+ mdio_data = &ath79_mdio1_data;
+ }
+ break;
+
+ case ATH79_SOC_AR7242:
+ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG,
+ AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000,
+ AR71XX_ETH0_PLL_SHIFT);
+ /* fall through */
+ default:
+ mdio_dev = &ath79_mdio0_device;
+ mdio_data = &ath79_mdio0_data;
+ break;
+ }
+
+ mdio_data->phy_mask = phy_mask;
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7240:
+ mdio_data->is_ar7240 = 1;
+ /* fall through */
+ case ATH79_SOC_AR7241:
+ mdio_data->builtin_switch = 1;
+ break;
+
+ case ATH79_SOC_AR9330:
+ mdio_data->is_ar9330 = 1;
+ /* fall through */
+ case ATH79_SOC_AR9331:
+ mdio_data->builtin_switch = 1;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ if (id == 1) {
+ mdio_data->builtin_switch = 1;
+ mdio_data->ref_clock = ar934x_get_mdio_ref_clock();
+ mdio_data->mdio_clock = 6250000;
+ }
+ mdio_data->is_ar934x = 1;
+ break;
+ case ATH79_SOC_QCA9558:
+ if (id == 1)
+ mdio_data->builtin_switch = 1;
+ mdio_data->is_ar934x = 1;
+ break;
+
+ default:
+ break;
+ }
+
+ platform_device_register(mdio_dev);
+}
+
+struct ath79_eth_pll_data ath79_eth0_pll_data;
+struct ath79_eth_pll_data ath79_eth1_pll_data;
+
+static u32 ath79_get_eth_pll(unsigned int mac, int speed)
+{
+ struct ath79_eth_pll_data *pll_data;
+ u32 pll_val;
+
+ switch (mac) {
+ case 0:
+ pll_data = &ath79_eth0_pll_data;
+ break;
+ case 1:
+ pll_data = &ath79_eth1_pll_data;
+ break;
+ default:
+ BUG();
+ }
+
+ switch (speed) {
+ case SPEED_10:
+ pll_val = pll_data->pll_10;
+ break;
+ case SPEED_100:
+ pll_val = pll_data->pll_100;
+ break;
+ case SPEED_1000:
+ pll_val = pll_data->pll_1000;
+ break;
+ default:
+ BUG();
+ }
+
+ return pll_val;
+}
+
+static void ath79_set_speed_ge0(int speed)
+{
+ u32 val = ath79_get_eth_pll(0, speed);
+
+ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
+ val, AR71XX_ETH0_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
+}
+
+static void ath79_set_speed_ge1(int speed)
+{
+ u32 val = ath79_get_eth_pll(1, speed);
+
+ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
+ val, AR71XX_ETH1_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
+}
+
+static void ar7242_set_speed_ge0(int speed)
+{
+ u32 val = ath79_get_eth_pll(0, speed);
+ void __iomem *base;
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+ __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK);
+ iounmap(base);
+}
+
+static void ar91xx_set_speed_ge0(int speed)
+{
+ u32 val = ath79_get_eth_pll(0, speed);
+
+ ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK,
+ val, AR913X_ETH0_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
+}
+
+static void ar91xx_set_speed_ge1(int speed)
+{
+ u32 val = ath79_get_eth_pll(1, speed);
+
+ ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK,
+ val, AR913X_ETH1_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
+}
+
+static void ar934x_set_speed_ge0(int speed)
+{
+ void __iomem *base;
+ u32 val = ath79_get_eth_pll(0, speed);
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+ __raw_writel(val, base + AR934X_PLL_ETH_XMII_CONTROL_REG);
+ iounmap(base);
+}
+
+static void ath79_set_speed_dummy(int speed)
+{
+}
+
+static void ath79_ddr_no_flush(void)
+{
+}
+
+static void ath79_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0);
+}
+
+static void ath79_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE1);
+}
+
+static void ar724x_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar724x_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE1);
+}
+
+static void ar91xx_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar91xx_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE1);
+}
+
+static void ar933x_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar933x_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1);
+}
+
+static struct resource ath79_eth0_resources[] = {
+ {
+ .name = "mac_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE0_BASE,
+ .end = AR71XX_GE0_BASE + 0x200 - 1,
+ }, {
+ .name = "mac_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = ATH79_CPU_IRQ_GE0,
+ .end = ATH79_CPU_IRQ_GE0,
+ },
+};
+
+struct ag71xx_platform_data ath79_eth0_data = {
+ .reset_bit = AR71XX_RESET_GE0_MAC,
+};
+
+struct platform_device ath79_eth0_device = {
+ .name = "ag71xx",
+ .id = 0,
+ .resource = ath79_eth0_resources,
+ .num_resources = ARRAY_SIZE(ath79_eth0_resources),
+ .dev = {
+ .platform_data = &ath79_eth0_data,
+ },
+};
+
+static struct resource ath79_eth1_resources[] = {
+ {
+ .name = "mac_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE1_BASE,
+ .end = AR71XX_GE1_BASE + 0x200 - 1,
+ }, {
+ .name = "mac_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = ATH79_CPU_IRQ_GE1,
+ .end = ATH79_CPU_IRQ_GE1,
+ },
+};
+
+struct ag71xx_platform_data ath79_eth1_data = {
+ .reset_bit = AR71XX_RESET_GE1_MAC,
+};
+
+struct platform_device ath79_eth1_device = {
+ .name = "ag71xx",
+ .id = 1,
+ .resource = ath79_eth1_resources,
+ .num_resources = ARRAY_SIZE(ath79_eth1_resources),
+ .dev = {
+ .platform_data = &ath79_eth1_data,
+ },
+};
+
+struct ag71xx_switch_platform_data ath79_switch_data;
+
+#define AR71XX_PLL_VAL_1000 0x00110000
+#define AR71XX_PLL_VAL_100 0x00001099
+#define AR71XX_PLL_VAL_10 0x00991099
+
+#define AR724X_PLL_VAL_1000 0x00110000
+#define AR724X_PLL_VAL_100 0x00001099
+#define AR724X_PLL_VAL_10 0x00991099
+
+#define AR7242_PLL_VAL_1000 0x16000000
+#define AR7242_PLL_VAL_100 0x00000101
+#define AR7242_PLL_VAL_10 0x00001616
+
+#define AR913X_PLL_VAL_1000 0x1a000000
+#define AR913X_PLL_VAL_100 0x13000a44
+#define AR913X_PLL_VAL_10 0x00441099
+
+#define AR933X_PLL_VAL_1000 0x00110000
+#define AR933X_PLL_VAL_100 0x00001099
+#define AR933X_PLL_VAL_10 0x00991099
+
+#define AR934X_PLL_VAL_1000 0x16000000
+#define AR934X_PLL_VAL_100 0x00000101
+#define AR934X_PLL_VAL_10 0x00001616
+
+static void __init ath79_init_eth_pll_data(unsigned int id)
+{
+ struct ath79_eth_pll_data *pll_data;
+ u32 pll_10, pll_100, pll_1000;
+
+ switch (id) {
+ case 0:
+ pll_data = &ath79_eth0_pll_data;
+ break;
+ case 1:
+ pll_data = &ath79_eth1_pll_data;
+ break;
+ default:
+ BUG();
+ }
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ pll_10 = AR71XX_PLL_VAL_10;
+ pll_100 = AR71XX_PLL_VAL_100;
+ pll_1000 = AR71XX_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ pll_10 = AR724X_PLL_VAL_10;
+ pll_100 = AR724X_PLL_VAL_100;
+ pll_1000 = AR724X_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR7242:
+ pll_10 = AR7242_PLL_VAL_10;
+ pll_100 = AR7242_PLL_VAL_100;
+ pll_1000 = AR7242_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR9130:
+ case ATH79_SOC_AR9132:
+ pll_10 = AR913X_PLL_VAL_10;
+ pll_100 = AR913X_PLL_VAL_100;
+ pll_1000 = AR913X_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ pll_10 = AR933X_PLL_VAL_10;
+ pll_100 = AR933X_PLL_VAL_100;
+ pll_1000 = AR933X_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9558:
+ pll_10 = AR934X_PLL_VAL_10;
+ pll_100 = AR934X_PLL_VAL_100;
+ pll_1000 = AR934X_PLL_VAL_1000;
+ break;
+
+ default:
+ BUG();
+ }
+
+ if (!pll_data->pll_10)
+ pll_data->pll_10 = pll_10;
+
+ if (!pll_data->pll_100)
+ pll_data->pll_100 = pll_100;
+
+ if (!pll_data->pll_1000)
+ pll_data->pll_1000 = pll_1000;
+}
+
+static int __init ath79_setup_phy_if_mode(unsigned int id,
+ struct ag71xx_platform_data *pdata)
+{
+ unsigned int mii_if;
+
+ switch (id) {
+ case 0:
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ case ATH79_SOC_AR9130:
+ case ATH79_SOC_AR9132:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ mii_if = AR71XX_MII0_CTRL_IF_MII;
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ mii_if = AR71XX_MII0_CTRL_IF_GMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ mii_if = AR71XX_MII0_CTRL_IF_RGMII;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ mii_if = AR71XX_MII0_CTRL_IF_RMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if);
+ break;
+
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
+ break;
+
+ case ATH79_SOC_AR7242:
+ /* FIXME */
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9558:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RMII:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ BUG();
+ }
+ break;
+ case 1:
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ case ATH79_SOC_AR9130:
+ case ATH79_SOC_AR9132:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_RMII:
+ mii_if = AR71XX_MII1_CTRL_IF_RMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ mii_if = AR71XX_MII1_CTRL_IF_RGMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if);
+ break;
+
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ break;
+
+ case ATH79_SOC_AR7242:
+ /* FIXME */
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9558:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ BUG();
+ }
+ break;
+ }
+
+ return 0;
+}
+
+void __init ath79_setup_ar933x_phy4_switch(bool mac, bool mdio)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE);
+
+ t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
+ t &= ~(AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
+ if (mac)
+ t |= AR933X_ETH_CFG_SW_PHY_SWAP;
+ if (mdio)
+ t |= AR933X_ETH_CFG_SW_PHY_ADDR_SWAP;
+ __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static int ath79_eth_instance __initdata;
+void __init ath79_register_eth(unsigned int id)
+{
+ struct platform_device *pdev;
+ struct ag71xx_platform_data *pdata;
+ int err;
+
+ if (id > 1) {
+ printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
+ return;
+ }
+
+ ath79_init_eth_pll_data(id);
+
+ if (id == 0)
+ pdev = &ath79_eth0_device;
+ else
+ pdev = &ath79_eth1_device;
+
+ pdata = pdev->dev.platform_data;
+
+ err = ath79_setup_phy_if_mode(id, pdata);
+ if (err) {
+ printk(KERN_ERR
+ "ar71xx: invalid PHY interface mode for GE%u\n", id);
+ return;
+ }
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ if (id == 0) {
+ pdata->ddr_flush = ath79_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ath79_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_ge1;
+ }
+ break;
+
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ if (id == 0) {
+ pdata->ddr_flush = ath79_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ath79_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_ge1;
+ }
+ pdata->has_gbit = 1;
+ break;
+
+ case ATH79_SOC_AR7242:
+ if (id == 0) {
+ pdata->reset_bit |= AR724X_RESET_GE0_MDIO |
+ AR71XX_RESET_GE0_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge0;
+ pdata->set_speed = ar7242_set_speed_ge0;
+ } else {
+ pdata->reset_bit |= AR724X_RESET_GE1_MDIO |
+ AR71XX_RESET_GE1_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_dummy;
+ }
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_AR7241:
+ if (id == 0)
+ pdata->reset_bit |= AR724X_RESET_GE0_MDIO;
+ else
+ pdata->reset_bit |= AR724X_RESET_GE1_MDIO;
+ /* fall through */
+ case ATH79_SOC_AR7240:
+ if (id == 0) {
+ pdata->reset_bit |= AR71XX_RESET_GE0_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->phy_mask = BIT(4);
+ } else {
+ pdata->reset_bit |= AR71XX_RESET_GE1_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->speed = SPEED_1000;
+ pdata->duplex = DUPLEX_FULL;
+ pdata->switch_data = &ath79_switch_data;
+
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ }
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+ if (ath79_soc == ATH79_SOC_AR7240)
+ pdata->is_ar7240 = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_AR9130:
+ if (id == 0) {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge0;
+ pdata->set_speed = ar91xx_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge1;
+ pdata->set_speed = ar91xx_set_speed_ge1;
+ }
+ pdata->is_ar91xx = 1;
+ break;
+
+ case ATH79_SOC_AR9132:
+ if (id == 0) {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge0;
+ pdata->set_speed = ar91xx_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge1;
+ pdata->set_speed = ar91xx_set_speed_ge1;
+ }
+ pdata->is_ar91xx = 1;
+ pdata->has_gbit = 1;
+ break;
+
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ if (id == 0) {
+ pdata->reset_bit = AR933X_RESET_GE0_MAC |
+ AR933X_RESET_GE0_MDIO;
+ pdata->ddr_flush = ar933x_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->phy_mask = BIT(4);
+ } else {
+ pdata->reset_bit = AR933X_RESET_GE1_MAC |
+ AR933X_RESET_GE1_MDIO;
+ pdata->ddr_flush = ar933x_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->speed = SPEED_1000;
+ pdata->duplex = DUPLEX_FULL;
+ pdata->switch_data = &ath79_switch_data;
+
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ }
+
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9558:
+ if (id == 0) {
+ pdata->reset_bit = AR934X_RESET_GE0_MAC |
+ AR934X_RESET_GE0_MDIO;
+ pdata->set_speed = ar934x_set_speed_ge0;
+ } else {
+ pdata->reset_bit = AR934X_RESET_GE1_MAC |
+ AR934X_RESET_GE1_MDIO;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->switch_data = &ath79_switch_data;
+
+ /* reset the built-in switch */
+ ath79_device_reset_set(AR934X_RESET_ETH_SWITCH);
+ ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH);
+ }
+
+ pdata->ddr_flush = ath79_ddr_no_flush;
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ default:
+ BUG();
+ }
+
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_GMII:
+ case PHY_INTERFACE_MODE_RGMII:
+ if (!pdata->has_gbit) {
+ printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
+ id);
+ return;
+ }
+ /* fallthrough */
+ default:
+ break;
+ }
+
+ if (!is_valid_ether_addr(pdata->mac_addr)) {
+ random_ether_addr(pdata->mac_addr);
+ printk(KERN_DEBUG
+ "ar71xx: using random MAC address for eth%d\n",
+ ath79_eth_instance);
+ }
+
+ if (pdata->mii_bus_dev == NULL) {
+ switch (ath79_soc) {
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9558:
+ if (id == 0)
+ pdata->mii_bus_dev = &ath79_mdio0_device.dev;
+ else
+ pdata->mii_bus_dev = &ath79_mdio1_device.dev;
+ break;
+
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ pdata->mii_bus_dev = &ath79_mdio1_device.dev;
+ break;
+
+ default:
+ pdata->mii_bus_dev = &ath79_mdio0_device.dev;
+ break;
+ }
+ }
+
+ /* Reset the device */
+ ath79_device_reset_set(pdata->reset_bit);
+ mdelay(100);
+
+ ath79_device_reset_clear(pdata->reset_bit);
+ mdelay(100);
+
+ platform_device_register(pdev);
+ ath79_eth_instance++;
+}
+
+void __init ath79_set_mac_base(unsigned char *mac)
+{
+ memcpy(ath79_mac_base, mac, ETH_ALEN);
+}
+
+void __init ath79_parse_mac_addr(char *mac_str)
+{
+ u8 tmp[ETH_ALEN];
+ int t;
+
+ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
+
+ if (t != ETH_ALEN)
+ t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
+ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
+
+ if (t == ETH_ALEN)
+ ath79_set_mac_base(tmp);
+ else
+ printk(KERN_DEBUG "ar71xx: failed to parse mac address "
+ "\"%s\"\n", mac_str);
+}
+
+static int __init ath79_ethaddr_setup(char *str)
+{
+ ath79_parse_mac_addr(str);
+ return 1;
+}
+__setup("ethaddr=", ath79_ethaddr_setup);
+
+static int __init ath79_kmac_setup(char *str)
+{
+ ath79_parse_mac_addr(str);
+ return 1;
+}
+__setup("kmac=", ath79_kmac_setup);
+
+void __init ath79_init_mac(unsigned char *dst, const unsigned char *src,
+ int offset)
+{
+ int t;
+
+ if (!dst)
+ return;
+
+ if (!src || !is_valid_ether_addr(src)) {
+ memset(dst, '\0', ETH_ALEN);
+ return;
+ }
+
+ t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]);
+ t += offset;
+
+ dst[0] = src[0];
+ dst[1] = src[1];
+ dst[2] = src[2];
+ dst[3] = (t >> 16) & 0xff;
+ dst[4] = (t >> 8) & 0xff;
+ dst[5] = t & 0xff;
+}
+
+void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src)
+{
+ int i;
+
+ if (!dst)
+ return;
+
+ if (!src || !is_valid_ether_addr(src)) {
+ memset(dst, '\0', ETH_ALEN);
+ return;
+ }
+
+ for (i = 0; i < ETH_ALEN; i++)
+ dst[i] = src[i];
+ dst[0] |= 0x02;
+}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
new file mode 100644
index 000000000..d4f27d9cf
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
@@ -0,0 +1,48 @@
+/*
+ * Atheros AR71xx SoC device definitions
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_ETH_H
+#define _ATH79_DEV_ETH_H
+
+#include <asm/mach-ath79/ag71xx_platform.h>
+
+struct platform_device;
+
+extern unsigned char ath79_mac_base[] __initdata;
+void ath79_parse_mac_addr(char *mac_str);
+void ath79_init_mac(unsigned char *dst, const unsigned char *src,
+ int offset);
+void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
+
+struct ath79_eth_pll_data {
+ u32 pll_10;
+ u32 pll_100;
+ u32 pll_1000;
+};
+
+extern struct ath79_eth_pll_data ath79_eth0_pll_data;
+extern struct ath79_eth_pll_data ath79_eth1_pll_data;
+
+extern struct ag71xx_platform_data ath79_eth0_data;
+extern struct ag71xx_platform_data ath79_eth1_data;
+extern struct platform_device ath79_eth0_device;
+extern struct platform_device ath79_eth1_device;
+void ath79_register_eth(unsigned int id);
+
+extern struct ag71xx_switch_platform_data ath79_switch_data;
+
+extern struct platform_device ath79_mdio0_device;
+extern struct platform_device ath79_mdio1_device;
+void ath79_register_mdio(unsigned int id, u32 phy_mask);
+
+void ath79_setup_ar933x_phy4_switch(bool mac, bool mdio);
+
+#endif /* _ATH79_DEV_ETH_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c
new file mode 100644
index 000000000..66115b1c4
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
+
+#include "dev-spi.h"
+#include "dev-m25p80.h"
+
+static struct ath79_spi_controller_data ath79_spi0_cdata =
+{
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
+static struct ath79_spi_controller_data ath79_spi1_cdata =
+{
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 1,
+};
+
+static struct spi_board_info ath79_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .controller_data = &ath79_spi0_cdata,
+ },
+ {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .controller_data = &ath79_spi1_cdata,
+ }
+};
+
+static struct ath79_spi_platform_data ath79_spi_data;
+
+void __init ath79_register_m25p80(struct flash_platform_data *pdata)
+{
+ ath79_spi_data.bus_num = 0;
+ ath79_spi_data.num_chipselect = 1;
+ ath79_spi0_cdata.is_flash = true;
+ ath79_spi_info[0].platform_data = pdata;
+ ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1);
+}
+
+static struct flash_platform_data *multi_pdata;
+
+static struct mtd_info *concat_devs[2] = { NULL, NULL };
+static struct work_struct mtd_concat_work;
+
+static void mtd_concat_add_work(struct work_struct *work)
+{
+ struct mtd_info *mtd;
+
+ mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash");
+
+ mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts);
+}
+
+static void mtd_concat_add(struct mtd_info *mtd)
+{
+ static bool registered = false;
+
+ if (registered)
+ return;
+
+ if (!strcmp(mtd->name, "spi0.0"))
+ concat_devs[0] = mtd;
+ else if (!strcmp(mtd->name, "spi0.1"))
+ concat_devs[1] = mtd;
+ else
+ return;
+
+ if (!concat_devs[0] || !concat_devs[1])
+ return;
+
+ registered = true;
+ INIT_WORK(&mtd_concat_work, mtd_concat_add_work);
+ schedule_work(&mtd_concat_work);
+}
+
+static void mtd_concat_remove(struct mtd_info *mtd)
+{
+}
+
+static void add_mtd_concat_notifier(void)
+{
+ static struct mtd_notifier not = {
+ .add = mtd_concat_add,
+ .remove = mtd_concat_remove,
+ };
+
+ register_mtd_user(&not);
+}
+
+
+void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata)
+{
+ multi_pdata = pdata;
+ add_mtd_concat_notifier();
+ ath79_spi_data.bus_num = 0;
+ ath79_spi_data.num_chipselect = 2;
+ ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
+}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h
new file mode 100644
index 000000000..637b41a7d
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_M25P80_H
+#define _ATH79_DEV_M25P80_H
+
+#include <linux/spi/flash.h>
+
+void ath79_register_m25p80(struct flash_platform_data *pdata) __init;
+void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init;
+
+#endif /* _ATH79_DEV_M25P80_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c
new file mode 100644
index 000000000..f330395fe
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c
@@ -0,0 +1,95 @@
+/*
+ * Atheros AR934X SoCs built-in NAND flash controller support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/platform/ar934x_nfc.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-nfc.h"
+
+static struct resource ath79_nfc_resources[2];
+static u64 ar934x_nfc_dmamask = DMA_BIT_MASK(32);
+static struct ar934x_nfc_platform_data ath79_nfc_data;
+
+static struct platform_device ath79_nfc_device = {
+ .name = AR934X_NFC_DRIVER_NAME,
+ .id = -1,
+ .resource = ath79_nfc_resources,
+ .num_resources = ARRAY_SIZE(ath79_nfc_resources),
+ .dev = {
+ .dma_mask = &ar934x_nfc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ath79_nfc_data,
+ },
+};
+
+static void ar934x_nfc_hw_reset(bool active)
+{
+ if (active) {
+ ath79_device_reset_set(AR934X_RESET_NANDF);
+ udelay(100);
+
+ ath79_device_reset_set(AR934X_RESET_ETH_SWITCH_ANALOG);
+ udelay(250);
+ } else {
+ ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH_ANALOG);
+ udelay(250);
+
+ ath79_device_reset_clear(AR934X_RESET_NANDF);
+ udelay(100);
+ }
+}
+
+static void ar934x_nfc_setup(void)
+{
+ ath79_nfc_resources[0].start = AR934X_NFC_BASE;
+ ath79_nfc_resources[0].end = AR934X_NFC_BASE + AR934X_NFC_SIZE - 1;
+ ath79_nfc_resources[0].flags = IORESOURCE_MEM;
+
+ ath79_nfc_resources[1].start = ATH79_MISC_IRQ(21);
+ ath79_nfc_resources[1].end = ATH79_MISC_IRQ(21);
+ ath79_nfc_resources[1].flags = IORESOURCE_IRQ;
+
+ ath79_nfc_data.hw_reset = ar934x_nfc_hw_reset;
+
+ platform_device_register(&ath79_nfc_device);
+}
+
+void __init ath79_nfc_set_select_chip(void (*f)(int chip_no))
+{
+ ath79_nfc_data.select_chip = f;
+}
+
+void __init ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd))
+{
+ ath79_nfc_data.scan_fixup = f;
+}
+
+void __init ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts)
+{
+ ath79_nfc_data.parts = parts;
+ ath79_nfc_data.nr_parts = nr_parts;
+}
+
+void __init ath79_register_nfc(void)
+{
+ if (soc_is_ar934x())
+ ar934x_nfc_setup();
+ else
+ BUG();
+}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h
new file mode 100644
index 000000000..1fc4b807b
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h
@@ -0,0 +1,27 @@
+/*
+ * Atheros AR934X SoCs built-in NAND Flash Controller support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_NFC_H
+#define _ATH79_DEV_NFC_H
+
+#ifdef CONFIG_ATH79_DEV_NFC
+void ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts);
+void ath79_nfc_set_select_chip(void (*f)(int chip_no));
+void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd));
+void ath79_register_nfc(void);
+#else
+static inline void ath79_nfc_set_parts(struct mtd_partition *parts,
+ int nr_parts) {}
+static inline void ath79_nfc_set_select_chip(void (*f)(int chip_no)) {}
+static inline void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd)) {}
+static inline void ath79_register_nfc(void) {}
+#endif
+
+#endif /* _ATH79_DEV_NFC_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c
new file mode 100644
index 000000000..15abb081f
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c
@@ -0,0 +1,154 @@
+/*
+ * ALFA Network AP96 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define ALFA_AP96_GPIO_PCIE_RESET 2
+#define ALFA_AP96_GPIO_SIM_DETECT 3
+#define ALFA_AP96_GPIO_MICROSD_CD 4
+#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5
+
+#define ALFA_AP96_GPIO_BUTTON_RESET 11
+
+#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL)
+
+static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALFA_AP96_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }
+};
+
+static int alfa_ap96_mmc_get_cd(struct device *dev)
+{
+ return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD);
+}
+
+static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
+ .get_cd = alfa_ap96_mmc_get_cd,
+ .caps = MMC_CAP_NEEDS_POLL,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct ath79_spi_controller_data ap96_spi0_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+ .is_flash = true,
+};
+
+static struct ath79_spi_controller_data ap96_spi1_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 1,
+};
+
+static struct ath79_spi_controller_data ap96_spi2_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 2,
+};
+
+static struct spi_board_info alfa_ap96_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .controller_data = &ap96_spi0_cdata
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "mmc_spi",
+ .platform_data = &alfa_ap96_mmc_data,
+ .controller_data = &ap96_spi1_cdata
+ }, {
+ .bus_num = 0,
+ .chip_select = 2,
+ .max_speed_hz = 6250000,
+ .modalias = "rtc-pcf2123",
+ .controller_data = &ap96_spi2_cdata
+ },
+};
+
+static struct ath79_spi_platform_data alfa_ap96_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 3,
+};
+
+static void __init alfa_ap96_gpio_setup(void)
+{
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
+ gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
+ gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
+ gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
+ gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
+ gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
+}
+
+#define ALFA_AP96_WAN_PHYMASK BIT(4)
+#define ALFA_AP96_LAN_PHYMASK BIT(5)
+#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
+
+static void __init alfa_ap96_init(void)
+{
+ alfa_ap96_gpio_setup();
+
+ ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
+ ath79_eth1_pll_data.pll_1000 = 0x110000;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
+ ath79_eth1_pll_data.pll_1000 = 0x110000;
+
+ ath79_register_eth(1);
+
+ ath79_register_pci();
+ ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
+ ARRAY_SIZE(alfa_ap96_spi_info));
+
+ ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(alfa_ap96_gpio_keys),
+ alfa_ap96_gpio_keys);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
+ alfa_ap96_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c
new file mode 100644
index 000000000..a515f4f54
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c
@@ -0,0 +1,113 @@
+/*
+ * ALFA Network N2/N5 board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define ALFA_NX_GPIO_LED_2 17
+#define ALFA_NX_GPIO_LED_3 16
+#define ALFA_NX_GPIO_LED_5 12
+#define ALFA_NX_GPIO_LED_6 8
+#define ALFA_NX_GPIO_LED_7 6
+#define ALFA_NX_GPIO_LED_8 7
+
+#define ALFA_NX_GPIO_BTN_RESET 11
+
+#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL)
+
+#define ALFA_NX_MAC0_OFFSET 0
+#define ALFA_NX_MAC1_OFFSET 6
+#define ALFA_NX_CALDATA_OFFSET 0x1000
+
+static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALFA_NX_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led alfa_nx_leds_gpio[] __initdata = {
+ {
+ .name = "alfa:green:led_2",
+ .gpio = ALFA_NX_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "alfa:green:led_3",
+ .gpio = ALFA_NX_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "alfa:red:led_5",
+ .gpio = ALFA_NX_GPIO_LED_5,
+ .active_low = 1,
+ }, {
+ .name = "alfa:amber:led_6",
+ .gpio = ALFA_NX_GPIO_LED_6,
+ .active_low = 1,
+ }, {
+ .name = "alfa:green:led_7",
+ .gpio = ALFA_NX_GPIO_LED_7,
+ .active_low = 1,
+ }, {
+ .name = "alfa:green:led_8",
+ .gpio = ALFA_NX_GPIO_LED_8,
+ .active_low = 1,
+ }
+};
+
+static void __init alfa_nx_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio),
+ alfa_nx_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(alfa_nx_gpio_keys),
+ alfa_nx_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + ALFA_NX_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ art + ALFA_NX_MAC1_OFFSET, 0);
+
+ /* WAN port */
+ ath79_register_eth(0);
+ /* LAN port */
+ ath79_register_eth(1);
+
+ ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5",
+ alfa_nx_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c
new file mode 100644
index 000000000..2495bcba7
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c
@@ -0,0 +1,88 @@
+/*
+ * Allnet ALL0258N support
+ *
+ * Copyright (C) 2011 Daniel Golle <dgolle@allnet.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+/* found via /sys/gpio/... try and error */
+#define ALL0258N_GPIO_BTN_RESET 1
+#define ALL0258N_GPIO_LED_RSSIHIGH 13
+#define ALL0258N_GPIO_LED_RSSIMEDIUM 15
+#define ALL0258N_GPIO_LED_RSSILOW 14
+
+/* defaults taken from others machs */
+#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
+
+/* showed up in the original firmware's bootlog */
+#define ALL0258N_SEC_PHYMASK BIT(3)
+
+static struct gpio_led all0258n_leds_gpio[] __initdata = {
+ {
+ .name = "all0258n:green:rssihigh",
+ .gpio = ALL0258N_GPIO_LED_RSSIHIGH,
+ .active_low = 1,
+ }, {
+ .name = "all0258n:yellow:rssimedium",
+ .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "all0258n:red:rssilow",
+ .gpio = ALL0258N_GPIO_LED_RSSILOW,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button all0258n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALL0258N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init all0258n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio),
+ all0258n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(all0258n_gpio_keys),
+ all0258n_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N",
+ all0258n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c
new file mode 100644
index 000000000..387ee7f9e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c
@@ -0,0 +1,85 @@
+/*
+ * Allnet ALL0315N support
+ *
+ * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-m25p80.h"
+#include "dev-leds-gpio.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define ALL0315N_GPIO_BTN_RESET 0
+#define ALL0315N_GPIO_LED_RSSIHIGH 14
+#define ALL0315N_GPIO_LED_RSSIMEDIUM 15
+#define ALL0315N_GPIO_LED_RSSILOW 16
+
+#define ALL0315N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALL0315N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0315N_KEYS_POLL_INTERVAL)
+
+static struct gpio_led all0315n_leds_gpio[] __initdata = {
+ {
+ .name = "all0315n:green:rssihigh",
+ .gpio = ALL0315N_GPIO_LED_RSSIHIGH,
+ .active_low = 1,
+ }, {
+ .name = "all0315n:yellow:rssimedium",
+ .gpio = ALL0315N_GPIO_LED_RSSIMEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "all0315n:red:rssilow",
+ .gpio = ALL0315N_GPIO_LED_RSSILOW,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button all0315n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALL0315N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALL0315N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init all0315n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1ffc0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1ffc1000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(all0315n_leds_gpio),
+ all0315n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ALL0315N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(all0315n_gpio_keys),
+ all0315n_gpio_keys);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap91_pci_init(ee, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ALL0315N, "ALL0315N", "Allnet ALL0315N",
+ all0315n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c
new file mode 100644
index 000000000..9b38faa47
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c
@@ -0,0 +1,84 @@
+/*
+ * Atheros AP113 board support
+ *
+ * Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "pci.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define AP113_GPIO_LED_USB 0
+#define AP113_GPIO_LED_STATUS 1
+#define AP113_GPIO_LED_ST 11
+
+#define AP113_GPIO_BTN_JUMPSTART 12
+
+#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL)
+
+static struct gpio_led ap113_leds_gpio[] __initdata = {
+ {
+ .name = "ap113:green:usb",
+ .gpio = AP113_GPIO_LED_USB,
+ .active_low = 1,
+ },
+ {
+ .name = "ap113:green:status",
+ .gpio = AP113_GPIO_LED_STATUS,
+ .active_low = 1,
+ },
+ {
+ .name = "ap113:green:st",
+ .gpio = AP113_GPIO_LED_ST,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
+ {
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP113_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+};
+
+static void __init ap113_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, ~BIT(0));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap113_gpio_keys),
+ ap113_gpio_keys);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
+ ap113_leds_gpio);
+
+ ath79_register_pci();
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
+ ap113_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap83.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap83.c
new file mode 100644
index 000000000..8519a9d9a
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap83.c
@@ -0,0 +1,275 @@
+/*
+ * Atheros AP83 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/vsc7385.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP83_GPIO_LED_WLAN 6
+#define AP83_GPIO_LED_POWER 14
+#define AP83_GPIO_LED_JUMPSTART 15
+#define AP83_GPIO_BTN_JUMPSTART 12
+#define AP83_GPIO_BTN_RESET 21
+
+#define AP83_050_GPIO_VSC7385_CS 1
+#define AP83_050_GPIO_VSC7385_MISO 3
+#define AP83_050_GPIO_VSC7385_MOSI 16
+#define AP83_050_GPIO_VSC7385_SCK 17
+
+#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition ap83_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x060000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x1a0000,
+ .size = 0x650000,
+ }, {
+ .name = "art",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x060000,
+ .size = 0x790000,
+ }
+};
+
+static struct physmap_flash_data ap83_flash_data = {
+ .width = 2,
+ .parts = ap83_flash_partitions,
+ .nr_parts = ARRAY_SIZE(ap83_flash_partitions),
+};
+
+static struct resource ap83_flash_resources[] = {
+ [0] = {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ap83_flash_device = {
+ .name = "ar91xx-flash",
+ .id = -1,
+ .resource = ap83_flash_resources,
+ .num_resources = ARRAY_SIZE(ap83_flash_resources),
+ .dev = {
+ .platform_data = &ap83_flash_data,
+ }
+};
+
+static struct gpio_led ap83_leds_gpio[] __initdata = {
+ {
+ .name = "ap83:green:jumpstart",
+ .gpio = AP83_GPIO_LED_JUMPSTART,
+ .active_low = 0,
+ }, {
+ .name = "ap83:green:power",
+ .gpio = AP83_GPIO_LED_POWER,
+ .active_low = 0,
+ }, {
+ .name = "ap83:green:wlan",
+ .gpio = AP83_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button ap83_gpio_keys[] __initdata = {
+ {
+ .desc = "soft_reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP83_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "jumpstart",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP83_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ }
+};
+
+static struct resource ap83_040_spi_resources[] = {
+ [0] = {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ap83_040_spi_device = {
+ .name = "ap83-spi",
+ .id = 0,
+ .resource = ap83_040_spi_resources,
+ .num_resources = ARRAY_SIZE(ap83_040_spi_resources),
+};
+
+static struct spi_gpio_platform_data ap83_050_spi_data = {
+ .miso = AP83_050_GPIO_VSC7385_MISO,
+ .mosi = AP83_050_GPIO_VSC7385_MOSI,
+ .sck = AP83_050_GPIO_VSC7385_SCK,
+ .num_chipselect = 1,
+};
+
+static struct platform_device ap83_050_spi_device = {
+ .name = "spi_gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ap83_050_spi_data,
+ }
+};
+
+static void ap83_vsc7385_reset(void)
+{
+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
+ udelay(10);
+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
+ mdelay(50);
+}
+
+static struct vsc7385_platform_data ap83_vsc7385_data = {
+ .reset = ap83_vsc7385_reset,
+ .ucode_name = "vsc7385_ucode_ap83.bin",
+ .mac_cfg = {
+ .tx_ipg = 6,
+ .bit2 = 0,
+ .clk_sel = 3,
+ },
+};
+
+static struct spi_board_info ap83_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "spi-vsc7385",
+ .platform_data = &ap83_vsc7385_data,
+ .controller_data = (void *) AP83_050_GPIO_VSC7385_CS,
+ }
+};
+
+static void __init ap83_generic_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, 0xfffffffe);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = 0x1;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_eth1_pll_data.pll_1000 = 0x1f000000;
+
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
+ ap83_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap83_gpio_keys),
+ ap83_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(eeprom, NULL);
+
+ platform_device_register(&ap83_flash_device);
+
+ spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
+}
+
+static void ap83_040_flash_lock(struct platform_device *pdev)
+{
+ ath79_flash_acquire();
+}
+
+static void ap83_040_flash_unlock(struct platform_device *pdev)
+{
+ ath79_flash_release();
+}
+
+static void __init ap83_040_setup(void)
+{
+ ap83_flash_data.lock = ap83_040_flash_lock;
+ ap83_flash_data.unlock = ap83_040_flash_unlock;
+ ap83_generic_setup();
+ platform_device_register(&ap83_040_spi_device);
+}
+
+static void __init ap83_050_setup(void)
+{
+ ap83_generic_setup();
+ platform_device_register(&ap83_050_spi_device);
+}
+
+static void __init ap83_setup(void)
+{
+ u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244);
+ unsigned int board_version;
+
+ board_version = (unsigned int)(board_id[0] - '0');
+ board_version += ((unsigned int)(board_id[1] - '0')) * 10;
+
+ switch (board_version) {
+ case 40:
+ ap83_040_setup();
+ break;
+ case 50:
+ ap83_050_setup();
+ break;
+ default:
+ printk(KERN_WARNING "AP83-%03u board is not yet supported\n",
+ board_version);
+ }
+}
+
+MIPS_MACHINE(ATH79_MACH_AP83, "AP83", "Atheros AP83", ap83_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c
new file mode 100644
index 000000000..35120d3e2
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c
@@ -0,0 +1,142 @@
+/*
+ * Atheros AP96 board support
+ *
+ * Copyright (C) 2009 Marco Porsch
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Atheros Communications
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define AP96_GPIO_LED_12_GREEN 0
+#define AP96_GPIO_LED_3_GREEN 1
+#define AP96_GPIO_LED_2_GREEN 2
+#define AP96_GPIO_LED_WPS_GREEN 4
+#define AP96_GPIO_LED_5_GREEN 5
+#define AP96_GPIO_LED_4_ORANGE 6
+
+/* Reset button - next to the power connector */
+#define AP96_GPIO_BTN_RESET 3
+/* WPS button - next to a led on right */
+#define AP96_GPIO_BTN_WPS 8
+
+#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL)
+
+#define AP96_WMAC0_MAC_OFFSET 0x120c
+#define AP96_WMAC1_MAC_OFFSET 0x520c
+#define AP96_CALDATA0_OFFSET 0x1000
+#define AP96_CALDATA1_OFFSET 0x5000
+
+/*
+ * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12
+ * below (from left to right on the board). Led 1 seems to be on whenever the
+ * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange;
+ * others are green.
+ *
+ * In addition, there is one led next to a button on the right side for WPS.
+ */
+static struct gpio_led ap96_leds_gpio[] __initdata = {
+ {
+ .name = "ap96:green:led2",
+ .gpio = AP96_GPIO_LED_2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "ap96:green:led3",
+ .gpio = AP96_GPIO_LED_3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "ap96:orange:led4",
+ .gpio = AP96_GPIO_LED_4_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "ap96:green:led5",
+ .gpio = AP96_GPIO_LED_5_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "ap96:green:led12",
+ .gpio = AP96_GPIO_LED_12_GREEN,
+ .active_low = 1,
+ }, { /* next to a button on right */
+ .name = "ap96:green:wps",
+ .gpio = AP96_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap96_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP96_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP96_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+#define AP96_WAN_PHYMASK 0x10
+#define AP96_LAN_PHYMASK 0x0f
+
+static void __init ap96_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK;
+
+ ath79_eth1_pll_data.pll_1000 = 0x1f000000;
+
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio),
+ ap96_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap96_gpio_keys),
+ ap96_gpio_keys);
+
+ ap94_pci_init(art + AP96_CALDATA0_OFFSET,
+ art + AP96_WMAC0_MAC_OFFSET,
+ art + AP96_CALDATA1_OFFSET,
+ art + AP96_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c
new file mode 100644
index 000000000..281129b78
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c
@@ -0,0 +1,107 @@
+/*
+ * AzureWave AW-NR580 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define AW_NR580_GPIO_LED_READY_RED 0
+#define AW_NR580_GPIO_LED_WLAN 1
+#define AW_NR580_GPIO_LED_READY_GREEN 2
+#define AW_NR580_GPIO_LED_WPS_GREEN 4
+#define AW_NR580_GPIO_LED_WPS_AMBER 5
+
+#define AW_NR580_GPIO_BTN_WPS 3
+#define AW_NR580_GPIO_BTN_RESET 11
+
+#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL)
+
+static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
+ {
+ .name = "aw-nr580:red:ready",
+ .gpio = AW_NR580_GPIO_LED_READY_RED,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:green:ready",
+ .gpio = AW_NR580_GPIO_LED_READY_GREEN,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:green:wps",
+ .gpio = AW_NR580_GPIO_LED_WPS_GREEN,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:amber:wps",
+ .gpio = AW_NR580_GPIO_LED_WPS_AMBER,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:green:wlan",
+ .gpio = AW_NR580_GPIO_LED_WLAN,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AW_NR580_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AW_NR580_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static const char *aw_nr580_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data aw_nr580_flash_data = {
+ .part_probes = aw_nr580_part_probes,
+};
+
+static void __init aw_nr580_setup(void)
+{
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+
+ ath79_register_pci();
+
+ ath79_register_m25p80(&aw_nr580_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
+ aw_nr580_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(aw_nr580_gpio_keys),
+ aw_nr580_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580",
+ aw_nr580_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c
new file mode 100644
index 000000000..c0fa9008c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c
@@ -0,0 +1,151 @@
+/*
+ * D-Link DIR-600 rev. A1 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define DIR_600_A1_GPIO_LED_WPS 0
+#define DIR_600_A1_GPIO_LED_POWER_AMBER 1
+#define DIR_600_A1_GPIO_LED_POWER_GREEN 6
+#define DIR_600_A1_GPIO_LED_LAN1 13
+#define DIR_600_A1_GPIO_LED_LAN2 14
+#define DIR_600_A1_GPIO_LED_LAN3 15
+#define DIR_600_A1_GPIO_LED_LAN4 16
+#define DIR_600_A1_GPIO_LED_WAN_AMBER 7
+#define DIR_600_A1_GPIO_LED_WAN_GREEN 17
+
+#define DIR_600_A1_GPIO_BTN_RESET 8
+#define DIR_600_A1_GPIO_BTN_WPS 12
+
+#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL)
+
+#define DIR_600_A1_NVRAM_ADDR 0x1f030000
+#define DIR_600_A1_NVRAM_SIZE 0x10000
+
+static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:green:power",
+ .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN,
+ }, {
+ .name = "d-link:amber:power",
+ .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER,
+ }, {
+ .name = "d-link:amber:wan",
+ .gpio = DIR_600_A1_GPIO_LED_WAN_AMBER,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_600_A1_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan1",
+ .gpio = DIR_600_A1_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan2",
+ .gpio = DIR_600_A1_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan3",
+ .gpio = DIR_600_A1_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan4",
+ .gpio = DIR_600_A1_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR_600_A1_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_600_A1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_600_A1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_600_a1_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac_buff[6];
+ u8 *mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
+ "lan_mac=", mac_buff) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
+ mac = mac_buff;
+ }
+
+ ath79_register_m25p80(NULL);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
+ dir_600_a1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_600_a1_gpio_keys),
+ dir_600_a1_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
+ dir_600_a1_setup);
+
+static void __init dir_615_e4_setup(void)
+{
+ dir_600_a1_setup();
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
+ dir_615_e4_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
new file mode 100644
index 000000000..425be301e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
@@ -0,0 +1,133 @@
+/*
+ * D-Link DIR-615 rev C1 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */
+#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */
+#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */
+
+/* buttons may need refinement */
+
+#define DIR_615C1_GPIO_BTN_WPS 12
+#define DIR_615C1_GPIO_BTN_RESET 21
+
+#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL)
+
+#define DIR_615C1_CONFIG_ADDR 0x1f020000
+#define DIR_615C1_CONFIG_SIZE 0x10000
+
+static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:orange:status",
+ .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR_615C1_GPIO_LED_BLUE_WPS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WAN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wancpu",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wlan",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:status",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:wan",
+ .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN,
+ .active_low = 1,
+ }
+
+};
+
+static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615C1_GPIO_BTN_RESET,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615C1_GPIO_BTN_WPS,
+ }
+};
+
+#define DIR_615C1_LAN_PHYMASK BIT(0)
+#define DIR_615C1_WAN_PHYMASK BIT(4)
+#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \
+ DIR_615C1_WAN_PHYMASK))
+
+static void __init dir_615c1_setup(void)
+{
+ const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+ u8 *wlan_mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
+ "lan_mac=", mac) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ wlan_mac = mac;
+ }
+
+ ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
+ dir_615c1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_615c1_gpio_keys),
+ dir_615c1_gpio_keys);
+
+ ath79_register_wmac(eeprom, wlan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",
+ dir_615c1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c
new file mode 100644
index 000000000..476cbd98e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c
@@ -0,0 +1,200 @@
+/*
+ * D-Link DIR-825 rev. B1 board support
+ *
+ * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
+ *
+ * based on mach-wndr3700.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define DIR825B1_GPIO_LED_BLUE_USB 0
+#define DIR825B1_GPIO_LED_ORANGE_POWER 1
+#define DIR825B1_GPIO_LED_BLUE_POWER 2
+#define DIR825B1_GPIO_LED_BLUE_WPS 4
+#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
+#define DIR825B1_GPIO_LED_BLUE_PLANET 11
+
+#define DIR825B1_GPIO_BTN_RESET 3
+#define DIR825B1_GPIO_BTN_WPS 8
+
+#define DIR825B1_GPIO_RTL8366_SDA 5
+#define DIR825B1_GPIO_RTL8366_SCK 7
+
+#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL)
+
+#define DIR825B1_CAL0_OFFSET 0x1000
+#define DIR825B1_CAL1_OFFSET 0x5000
+#define DIR825B1_MAC0_OFFSET 0xffa0
+#define DIR825B1_MAC1_OFFSET 0xffb4
+
+#define DIR825B1_CAL_LOCATION_0 0x1f660000
+#define DIR825B1_CAL_LOCATION_1 0x1f7f0000
+
+static struct gpio_led dir825b1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:blue:usb",
+ .gpio = DIR825B1_GPIO_LED_BLUE_USB,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:power",
+ .gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:power",
+ .gpio = DIR825B1_GPIO_LED_BLUE_POWER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR825B1_GPIO_LED_BLUE_WPS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:planet",
+ .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:planet",
+ .gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825B1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825B1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
+ { .reg = 0x06, .val = 0x0108 },
+};
+
+static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
+ .gpio_sda = DIR825B1_GPIO_RTL8366_SDA,
+ .gpio_sck = DIR825B1_GPIO_RTL8366_SCK,
+ .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals),
+ .initvals = dir825b1_rtl8366s_initvals,
+};
+
+static struct platform_device dir825b1_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &dir825b1_rtl8366s_data,
+ }
+};
+
+static void dir825b1_read_ascii_mac(u8 *dest, u8 *src)
+{
+ int ret;
+
+ ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &dest[0], &dest[1], &dest[2],
+ &dest[3], &dest[4], &dest[5]);
+
+ if (ret != ETH_ALEN)
+ memset(dest, 0, ETH_ALEN);
+}
+
+static bool __init dir825b1_is_caldata_valid(u8 *p)
+{
+ u16 *magic0, *magic1;
+
+ magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET);
+ magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET);
+
+ return (*magic0 == 0xa55a && *magic1 == 0xa55a);
+}
+
+static void __init dir825b1_wlan_init(void)
+{
+ u8 *caldata;
+ u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
+
+ caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0);
+ if (!dir825b1_is_caldata_valid(caldata)) {
+ caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1);
+ if (!dir825b1_is_caldata_valid(caldata)) {
+ pr_err("no calibration data found\n");
+ return;
+ }
+ }
+
+ dir825b1_read_ascii_mac(mac1, caldata + DIR825B1_MAC0_OFFSET);
+ dir825b1_read_ascii_mac(mac2, caldata + DIR825B1_MAC1_OFFSET);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, mac1,
+ caldata + DIR825B1_CAL1_OFFSET, mac2);
+}
+
+static void __init dir825b1_setup(void)
+{
+ dir825b1_wlan_init();
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+
+ ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+ ath79_eth1_pll_data.pll_1000 = 0x11110000;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
+ dir825b1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir825b1_gpio_keys),
+ dir825b1_gpio_keys);
+
+ ath79_register_usb();
+
+ platform_device_register(&dir825b1_rtl8366s_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
+ dir825b1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c
new file mode 100644
index 000000000..787e6275d
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c
@@ -0,0 +1,181 @@
+/*
+ * Senao EAP7660D board support
+ *
+ * Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com>
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/ath5k_platform.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */
+#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL)
+
+#define EAP7660D_GPIO_DS4 7
+#define EAP7660D_GPIO_DS5 2
+#define EAP7660D_GPIO_DS7 0
+#define EAP7660D_GPIO_DS8 4
+#define EAP7660D_GPIO_SW1 3
+#define EAP7660D_GPIO_SW3 8
+#define EAP7660D_PHYMASK BIT(20)
+#define EAP7660D_BOARDCONFIG 0x1F7F0000
+#define EAP7660D_GBIC_MAC_OFFSET 0x1000
+#define EAP7660D_WMAC0_MAC_OFFSET 0x1010
+#define EAP7660D_WMAC1_MAC_OFFSET 0x1016
+#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000
+#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000
+
+#ifdef CONFIG_PCI
+static struct ath5k_platform_data eap7660d_wmac0_data;
+static struct ath5k_platform_data eap7660d_wmac1_data;
+static char eap7660d_wmac0_mac[6];
+static char eap7660d_wmac1_mac[6];
+static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
+static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
+
+static int eap7660d_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 17:
+ dev->dev.platform_data = &eap7660d_wmac0_data;
+ break;
+
+ case 18:
+ dev->dev.platform_data = &eap7660d_wmac1_data;
+ break;
+ }
+
+ return 0;
+}
+
+void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1)
+{
+ if (cal_data0 && *cal_data0 == 0xa55a) {
+ memcpy(eap7660d_wmac0_eeprom, cal_data0,
+ ATH5K_PLAT_EEP_MAX_WORDS);
+ eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom;
+ }
+
+ if (cal_data1 && *cal_data1 == 0xa55a) {
+ memcpy(eap7660d_wmac1_eeprom, cal_data1,
+ ATH5K_PLAT_EEP_MAX_WORDS);
+ eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom;
+ }
+
+ if (mac_addr0) {
+ memcpy(eap7660d_wmac0_mac, mac_addr0,
+ sizeof(eap7660d_wmac0_mac));
+ eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac;
+ }
+
+ if (mac_addr1) {
+ memcpy(eap7660d_wmac1_mac, mac_addr1,
+ sizeof(eap7660d_wmac1_mac));
+ eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac;
+ }
+
+ ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init);
+ ath79_register_pci();
+}
+#else
+static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1)
+{
+}
+#endif /* CONFIG_PCI */
+
+static struct gpio_led eap7660d_leds_gpio[] __initdata = {
+ {
+ .name = "eap7660d:green:ds8",
+ .gpio = EAP7660D_GPIO_DS8,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds5",
+ .gpio = EAP7660D_GPIO_DS5,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds7",
+ .gpio = EAP7660D_GPIO_DS7,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds4",
+ .gpio = EAP7660D_GPIO_DS4,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EAP7660D_GPIO_SW1,
+ .active_low = 1,
+ },
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EAP7660D_GPIO_SW3,
+ .active_low = 1,
+ }
+};
+
+static const char *eap7660d_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data eap7660d_flash_data = {
+ .part_probes = eap7660d_part_probes,
+};
+
+static void __init eap7660d_setup(void)
+{
+ u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG);
+
+ ath79_register_mdio(0, ~EAP7660D_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = EAP7660D_PHYMASK;
+ ath79_register_eth(0);
+ ath79_register_m25p80(&eap7660d_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
+ eap7660d_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(eap7660d_gpio_keys),
+ eap7660d_gpio_keys);
+ eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET,
+ boardconfig + EAP7660D_WMAC0_MAC_OFFSET,
+ boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET,
+ boardconfig + EAP7660D_WMAC1_MAC_OFFSET);
+};
+
+MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
+ eap7660d_setup);
+
+MIPS_MACHINE(ATH79_MACH_ALL0305, "ALL0305", "Allnet ALL0305",
+ eap7660d_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c
new file mode 100644
index 000000000..47ed51b5d
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c
@@ -0,0 +1,144 @@
+/*
+ * EW Dorin board support
+ * (based on Atheros Ref. Design AP121)
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2012 Embedded Wireless GmbH www.80211.de
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DORIN_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DORIN_KEYS_DEBOUNCE_INTERVAL (3 * DORIN_KEYS_POLL_INTERVAL)
+
+#define DORIN_CALDATA_OFFSET 0x1000
+#define DORIN_WMAC_MAC_OFFSET 0x1002
+
+#define DORIN_GPIO_LED_21 21
+#define DORIN_GPIO_LED_22 22
+
+#define DORIN_GPIO_BTN_JUMPSTART 11
+#define DORIN_GPIO_BTN_RESET 6
+
+static struct gpio_led dorin_leds_gpio[] __initdata = {
+ {
+ .name = "dorin:green:led21",
+ .gpio = DORIN_GPIO_LED_21,
+ .active_low = 1,
+ },
+ {
+ .name = "dorin:green:led22",
+ .gpio = DORIN_GPIO_LED_22,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button dorin_gpio_keys[] __initdata = {
+ {
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DORIN_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+ {
+ .desc = "reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DORIN_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init ew_dorin_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ static u8 mac[6];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_usb();
+
+ if (ar93xx_wmac_read_mac_address(mac)) {
+ ath79_register_wmac(NULL, NULL);
+ } else {
+ ath79_register_wmac(art + DORIN_CALDATA_OFFSET,
+ art + DORIN_WMAC_MAC_OFFSET);
+ memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac));
+ }
+
+ mac[3] |= 0x40;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio),
+ dorin_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dorin_gpio_keys),
+ dorin_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_EW_DORIN, "EW-DORIN", "EmbWir-Dorin",
+ ew_dorin_setup);
+
+
+static void __init ew_dorin_router_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ static u8 mac[6];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_usb();
+
+ if (ar93xx_wmac_read_mac_address(mac)) {
+ ath79_register_wmac(NULL, NULL);
+ } else {
+ ath79_register_wmac(art + DORIN_CALDATA_OFFSET,
+ art + DORIN_WMAC_MAC_OFFSET);
+ memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac));
+ }
+
+ mac[3] |= 0x40;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ mac[3] &= 0x3F;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_setup_ar933x_phy4_switch(true, true);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio),
+ dorin_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dorin_gpio_keys),
+ dorin_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_EW_DORIN_ROUTER, "EW-DORIN-ROUTER",
+ "EmbWir-Dorin-Router", ew_dorin_router_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c
new file mode 100644
index 000000000..f8870e711
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c
@@ -0,0 +1,136 @@
+/*
+ * ALFA NETWORKS Hornet-UB board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define HORNET_UB_GPIO_LED_WLAN 0
+#define HORNET_UB_GPIO_LED_USB 1
+#define HORNET_UB_GPIO_LED_LAN 13
+#define HORNET_UB_GPIO_LED_WAN 17
+#define HORNET_UB_GPIO_LED_WPS 27
+
+#define HORNET_UB_GPIO_BTN_RESET 11
+#define HORNET_UB_GPIO_BTN_WPS 12
+
+#define HORNET_UB_GPIO_USB_POWER 26
+
+#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */
+#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL)
+
+#define HORNET_UB_MAC0_OFFSET 0x0000
+#define HORNET_UB_MAC1_OFFSET 0x0006
+#define HORNET_UB_CALDATA_OFFSET 0x1000
+
+static struct gpio_led hornet_ub_leds_gpio[] __initdata = {
+ {
+ .name = "alfa:blue:lan",
+ .gpio = HORNET_UB_GPIO_LED_LAN,
+ .active_low = 0,
+ },
+ {
+ .name = "alfa:blue:usb",
+ .gpio = HORNET_UB_GPIO_LED_USB,
+ .active_low = 0,
+ },
+ {
+ .name = "alfa:blue:wan",
+ .gpio = HORNET_UB_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "alfa:blue:wlan",
+ .gpio = HORNET_UB_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "alfa:blue:wps",
+ .gpio = HORNET_UB_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = HORNET_UB_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = HORNET_UB_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init hornet_ub_gpio_setup(void)
+{
+ u32 t;
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
+
+ ath79_set_usb_power_gpio(HORNET_UB_GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "USB power");
+}
+
+static void __init hornet_ub_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ hornet_ub_gpio_setup();
+
+ ath79_register_m25p80(NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio),
+ hornet_ub_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(hornet_ub_gpio_keys),
+ hornet_ub_gpio_keys);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ art + HORNET_UB_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + HORNET_UB_MAC1_OFFSET, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORKS Hornet-UB",
+ hornet_ub_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c
new file mode 100644
index 000000000..d1fe0f8a2
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c
@@ -0,0 +1,190 @@
+/*
+ * jjPlus JA76PF board support
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */
+#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL)
+
+#define JA76PF_GPIO_I2C_SCL 0
+#define JA76PF_GPIO_I2C_SDA 1
+#define JA76PF_GPIO_LED_1 5
+#define JA76PF_GPIO_LED_2 4
+#define JA76PF_GPIO_LED_3 3
+#define JA76PF_GPIO_BTN_RESET 11
+
+static struct gpio_led ja76pf_leds_gpio[] __initdata = {
+ {
+ .name = "jjplus:green:led1",
+ .gpio = JA76PF_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "jjplus:green:led2",
+ .gpio = JA76PF_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "jjplus:green:led3",
+ .gpio = JA76PF_GPIO_LED_3,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JA76PF_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = {
+ .sda_pin = JA76PF_GPIO_I2C_SDA,
+ .scl_pin = JA76PF_GPIO_I2C_SCL,
+};
+
+static struct platform_device ja76pf_i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ja76pf_i2c_gpio_data,
+ }
+};
+
+static const char *ja76pf_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data ja76pf_flash_data = {
+ .part_probes = ja76pf_part_probes,
+};
+
+#define JA76PF_WAN_PHYMASK (1 << 4)
+#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3))
+#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK)
+
+static void __init ja76pf_init(void)
+{
+ ath79_register_m25p80(&ja76pf_flash_data);
+
+ ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ platform_device_register(&ja76pf_i2c_gpio_device);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio),
+ ja76pf_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ja76pf_gpio_keys),
+ ja76pf_gpio_keys);
+
+ ath79_register_usb();
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init);
+
+#define JA76PF2_GPIO_LED_D2 5
+#define JA76PF2_GPIO_LED_D3 4
+#define JA76PF2_GPIO_LED_D4 3
+#define JA76PF2_GPIO_BTN_RESET 7
+#define JA76PF2_GPIO_BTN_WPS 8
+
+static struct gpio_led ja76pf2_leds_gpio[] __initdata = {
+ {
+ .name = "jjplus:green:led1",
+ .gpio = JA76PF2_GPIO_LED_D2,
+ .active_low = 1,
+ }, {
+ .name = "jjplus:green:led2",
+ .gpio = JA76PF2_GPIO_LED_D3,
+ .active_low = 0,
+ }, {
+ .name = "jjplus:green:led3",
+ .gpio = JA76PF2_GPIO_LED_D4,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button ja76pf2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JA76PF2_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JA76PF2_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+#define JA76PF2_LAN_PHYMASK BIT(0)
+#define JA76PF2_WAN_PHYMASK BIT(4)
+#define JA76PF2_MDIO_PHYMASK (JA76PF2_LAN_PHYMASK | JA76PF2_WAN_PHYMASK)
+
+static void __init ja76pf2_init(void)
+{
+ ath79_register_m25p80(&ja76pf_flash_data);
+
+ ath79_register_mdio(0, ~JA76PF2_MDIO_PHYMASK);
+
+ /* MAC0 is connected to the CPU port of the AR8316 switch */
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ /* MAC1 is connected to the PHY4 of the AR8316 switch */
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = BIT(4);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf2_leds_gpio),
+ ja76pf2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ja76pf2_gpio_keys),
+ ja76pf2_gpio_keys);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_JA76PF2, "JA76PF2", "jjPlus JA76PF2", ja76pf2_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c
new file mode 100644
index 000000000..a3c93ccd9
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c
@@ -0,0 +1,95 @@
+/*
+ * jjPlus JWAP003 board support
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */
+#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL)
+
+#define JWAP003_GPIO_WPS 11
+#define JWAP003_GPIO_I2C_SCL 0
+#define JWAP003_GPIO_I2C_SDA 1
+
+static struct gpio_keys_button jwap003_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JWAP003_GPIO_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = {
+ .sda_pin = JWAP003_GPIO_I2C_SDA,
+ .scl_pin = JWAP003_GPIO_I2C_SCL,
+};
+
+static struct platform_device jwap003_i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &jwap003_i2c_gpio_data,
+ }
+};
+
+static const char *jwap003_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data jwap003_flash_data = {
+ .part_probes = jwap003_part_probes,
+};
+
+#define JWAP003_WAN_PHYMASK BIT(0)
+#define JWAP003_LAN_PHYMASK BIT(4)
+
+static void __init jwap003_init(void)
+{
+ ath79_register_m25p80(&jwap003_flash_data);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ platform_device_register(&jwap003_i2c_gpio_device);
+
+ ath79_register_usb();
+
+ ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(jwap003_gpio_keys),
+ jwap003_gpio_keys);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c
new file mode 100644
index 000000000..c2460ce33
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c
@@ -0,0 +1,124 @@
+/*
+ * Planex MZK-W04NU board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MZK_W04NU_GPIO_LED_USB 0
+#define MZK_W04NU_GPIO_LED_STATUS 1
+#define MZK_W04NU_GPIO_LED_WPS 3
+#define MZK_W04NU_GPIO_LED_WLAN 6
+#define MZK_W04NU_GPIO_LED_AP 15
+#define MZK_W04NU_GPIO_LED_ROUTER 16
+
+#define MZK_W04NU_GPIO_BTN_APROUTER 5
+#define MZK_W04NU_GPIO_BTN_WPS 12
+#define MZK_W04NU_GPIO_BTN_RESET 21
+
+#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL)
+
+static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = {
+ {
+ .name = "planex:green:status",
+ .gpio = MZK_W04NU_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "planex:blue:wps",
+ .gpio = MZK_W04NU_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:wlan",
+ .gpio = MZK_W04NU_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:usb",
+ .gpio = MZK_W04NU_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:ap",
+ .gpio = MZK_W04NU_GPIO_LED_AP,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:router",
+ .gpio = MZK_W04NU_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W04NU_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W04NU_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "aprouter",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W04NU_GPIO_BTN_APROUTER,
+ .active_low = 0,
+ }
+};
+
+#define MZK_W04NU_WAN_PHYMASK BIT(4)
+#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK)
+
+static void __init mzk_w04nu_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, MZK_W04NU_MDIO_MASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
+ mzk_w04nu_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mzk_w04nu_gpio_keys),
+ mzk_w04nu_gpio_keys);
+ ath79_register_usb();
+
+ ath79_register_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",
+ mzk_w04nu_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c
new file mode 100644
index 000000000..8c4036528
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c
@@ -0,0 +1,115 @@
+/*
+ * Planex MZK-W300NH board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MZK_W300NH_GPIO_LED_STATUS 1
+#define MZK_W300NH_GPIO_LED_WPS 3
+#define MZK_W300NH_GPIO_LED_WLAN 6
+#define MZK_W300NH_GPIO_LED_AP_GREEN 15
+#define MZK_W300NH_GPIO_LED_AP_AMBER 16
+
+#define MZK_W300NH_GPIO_BTN_APROUTER 5
+#define MZK_W300NH_GPIO_BTN_WPS 12
+#define MZK_W300NH_GPIO_BTN_RESET 21
+
+#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL)
+
+static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
+ {
+ .name = "planex:green:status",
+ .gpio = MZK_W300NH_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "planex:blue:wps",
+ .gpio = MZK_W300NH_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:wlan",
+ .gpio = MZK_W300NH_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:aprouter",
+ .gpio = MZK_W300NH_GPIO_LED_AP_GREEN,
+ }, {
+ .name = "planex:amber:aprouter",
+ .gpio = MZK_W300NH_GPIO_LED_AP_AMBER,
+ }
+};
+
+static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W300NH_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W300NH_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "aprouter",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W300NH_GPIO_BTN_APROUTER,
+ .active_low = 0,
+ }
+};
+
+#define MZK_W300NH_WAN_PHYMASK BIT(4)
+#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK)
+
+static void __init mzk_w300nh_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, MZK_W300NH_MDIO_MASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
+ mzk_w300nh_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mzk_w300nh_gpio_keys),
+ mzk_w300nh_gpio_keys);
+ ath79_register_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
+ mzk_w300nh_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c
new file mode 100644
index 000000000..8aa7331d4
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c
@@ -0,0 +1,220 @@
+/*
+ * Zyxel NBG 460N/550N/550NH board support
+ *
+ * Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com>
+ *
+ * based on mach-tl-wr1043nd.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+/* LEDs */
+#define NBG460N_GPIO_LED_WPS 3
+#define NBG460N_GPIO_LED_WAN 6
+#define NBG460N_GPIO_LED_POWER 14
+#define NBG460N_GPIO_LED_WLAN 15
+
+/* Buttons */
+#define NBG460N_GPIO_BTN_WPS 12
+#define NBG460N_GPIO_BTN_RESET 21
+
+#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL)
+
+/* RTC chip PCF8563 I2C interface */
+#define NBG460N_GPIO_PCF8563_SDA 8
+#define NBG460N_GPIO_PCF8563_SCK 7
+
+/* Switch configuration I2C interface */
+#define NBG460N_GPIO_RTL8366_SDA 16
+#define NBG460N_GPIO_RTL8366_SCK 18
+
+static struct mtd_partition nbg460n_partitions[] = {
+ {
+ .name = "Bootbase",
+ .offset = 0,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "U-Boot Config",
+ .offset = 0x010000,
+ .size = 0x030000,
+ }, {
+ .name = "U-Boot",
+ .offset = 0x040000,
+ .size = 0x030000,
+ }, {
+ .name = "linux",
+ .offset = 0x070000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x150000,
+ .size = 0x2a0000,
+ }, {
+ .name = "CalibData",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x070000,
+ .size = 0x380000,
+ }
+};
+
+static struct flash_platform_data nbg460n_flash_data = {
+ .parts = nbg460n_partitions,
+ .nr_parts = ARRAY_SIZE(nbg460n_partitions),
+};
+
+static struct gpio_led nbg460n_leds_gpio[] __initdata = {
+ {
+ .name = "nbg460n:green:power",
+ .gpio = NBG460N_GPIO_LED_POWER,
+ .active_low = 0,
+ .default_trigger = "default-on",
+ }, {
+ .name = "nbg460n:green:wps",
+ .gpio = NBG460N_GPIO_LED_WPS,
+ .active_low = 0,
+ }, {
+ .name = "nbg460n:green:wlan",
+ .gpio = NBG460N_GPIO_LED_WLAN,
+ .active_low = 0,
+ }, {
+ /* Not really for controlling the LED,
+ when set low the LED blinks uncontrollable */
+ .name = "nbg460n:green:wan",
+ .gpio = NBG460N_GPIO_LED_WAN,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG460N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG460N_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = {
+ .sda_pin = NBG460N_GPIO_PCF8563_SDA,
+ .scl_pin = NBG460N_GPIO_PCF8563_SCK,
+ .udelay = 10,
+};
+
+static struct platform_device nbg460n_i2c_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .num_resources = 0,
+ .resource = NULL,
+ .dev = {
+ .platform_data = &nbg460n_i2c_device_platdata,
+ },
+};
+
+static struct i2c_board_info nbg460n_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+};
+
+static void __devinit nbg460n_i2c_init(void)
+{
+ /* The gpio interface */
+ platform_device_register(&nbg460n_i2c_device);
+ /* I2C devices */
+ i2c_register_board_info(0, nbg460n_i2c_devs,
+ ARRAY_SIZE(nbg460n_i2c_devs));
+}
+
+
+static struct rtl8366_platform_data nbg460n_rtl8366s_data = {
+ .gpio_sda = NBG460N_GPIO_RTL8366_SDA,
+ .gpio_sck = NBG460N_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device nbg460n_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &nbg460n_rtl8366s_data,
+ }
+};
+
+static void __init nbg460n_setup(void)
+{
+ /* end of bootloader sector contains mac address */
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8);
+ /* last sector contains wlan calib data */
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* LAN Port */
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ /* WAN Port */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ /* register the switch phy */
+ platform_device_register(&nbg460n_rtl8366s_device);
+
+ /* register flash */
+ ath79_register_m25p80(&nbg460n_flash_data);
+
+ ath79_register_wmac(eeprom, mac);
+
+ /* register RTC chip */
+ nbg460n_i2c_init();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio),
+ nbg460n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(nbg460n_gpio_keys),
+ nbg460n_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH",
+ nbg460n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c
new file mode 100644
index 000000000..faeb49a51
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c
@@ -0,0 +1,176 @@
+/*
+ * OpenMesh OM2P support
+ *
+ * Copyright (C) 2011 Marek Lindner <marek@open-mesh.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define OM2P_GPIO_LED_POWER 0
+#define OM2P_GPIO_LED_GREEN 13
+#define OM2P_GPIO_LED_RED 14
+#define OM2P_GPIO_LED_YELLOW 15
+#define OM2P_GPIO_LED_LAN 16
+#define OM2P_GPIO_LED_WAN 17
+#define OM2P_GPIO_BTN_RESET 11
+
+#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */
+#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL)
+
+#define OM2P_WAN_PHYMASK BIT(4)
+
+#define OM2P_LC_GPIO_LED_POWER 1
+#define OM2P_LC_GPIO_LED_GREEN 15
+#define OM2P_LC_GPIO_LED_RED 16
+#define OM2P_LC_GPIO_LED_YELLOW 0
+#define OM2P_LC_GPIO_LED_LAN 13
+#define OM2P_LC_GPIO_LED_WAN 17
+#define OM2P_LC_GPIO_BTN_RESET 12
+
+static struct flash_platform_data om2p_flash_data = {
+ .type = "s25sl12800",
+ .name = "ar7240-nor0",
+};
+
+static struct gpio_led om2p_leds_gpio[] __initdata = {
+ {
+ .name = "om2p:blue:power",
+ .gpio = OM2P_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "om2p:red:wifi",
+ .gpio = OM2P_GPIO_LED_RED,
+ .active_low = 1,
+ }, {
+ .name = "om2p:yellow:wifi",
+ .gpio = OM2P_GPIO_LED_YELLOW,
+ .active_low = 1,
+ }, {
+ .name = "om2p:green:wifi",
+ .gpio = OM2P_GPIO_LED_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "om2p:blue:lan",
+ .gpio = OM2P_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "om2p:blue:wan",
+ .gpio = OM2P_GPIO_LED_WAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button om2p_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = OM2P_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init om2p_setup(void)
+{
+ u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
+ u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
+ u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(&om2p_flash_data);
+
+ ath79_register_mdio(0, ~OM2P_WAN_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
+ om2p_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(om2p_gpio_keys),
+ om2p_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup);
+
+
+static struct flash_platform_data om2p_lc_flash_data = {
+ .type = "s25sl12800",
+};
+
+static void __init om2p_lc_setup(void)
+{
+ u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
+ u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
+ u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000);
+ u32 t;
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
+
+ ath79_register_m25p80(&om2p_lc_flash_data);
+
+ om2p_leds_gpio[0].gpio = OM2P_LC_GPIO_LED_POWER;
+ om2p_leds_gpio[1].gpio = OM2P_LC_GPIO_LED_RED;
+ om2p_leds_gpio[2].gpio = OM2P_LC_GPIO_LED_YELLOW;
+ om2p_leds_gpio[3].gpio = OM2P_LC_GPIO_LED_GREEN;
+ om2p_leds_gpio[4].gpio = OM2P_LC_GPIO_LED_LAN;
+ om2p_leds_gpio[5].gpio = OM2P_LC_GPIO_LED_WAN;
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
+ om2p_leds_gpio);
+
+ om2p_gpio_keys[0].gpio = OM2P_LC_GPIO_BTN_RESET;
+ ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(om2p_gpio_keys),
+ om2p_gpio_keys);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac2, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_OM2P_LC, "OM2P-LC", "OpenMesh OM2P LC", om2p_lc_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c
new file mode 100644
index 000000000..3a350e90a
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c
@@ -0,0 +1,83 @@
+/*
+ * Atheros PB42 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */
+#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL)
+
+#define PB42_GPIO_BTN_SW4 8
+#define PB42_GPIO_BTN_SW5 3
+
+static struct gpio_keys_button pb42_gpio_keys[] __initdata = {
+ {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB42_GPIO_BTN_SW4,
+ .active_low = 1,
+ }, {
+ .desc = "sw5",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB42_GPIO_BTN_SW5,
+ .active_low = 1,
+ }
+};
+
+static const char *pb42_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data pb42_flash_data = {
+ .part_probes = pb42_part_probes,
+};
+
+#define PB42_WAN_PHYMASK BIT(20)
+#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
+#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
+
+static void __init pb42_init(void)
+{
+ ath79_register_m25p80(&pb42_flash_data);
+
+ ath79_register_mdio(0, ~PB42_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(pb42_gpio_keys),
+ pb42_gpio_keys);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-pb92.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-pb92.c
new file mode 100644
index 000000000..76715a517
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-pb92.c
@@ -0,0 +1,70 @@
+/*
+ * Atheros PB92 board support
+ *
+ * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define PB92_KEYS_POLL_INTERVAL 20 /* msecs */
+#define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL)
+
+#define PB92_GPIO_BTN_SW4 8
+#define PB92_GPIO_BTN_SW5 3
+
+static struct gpio_keys_button pb92_gpio_keys[] __initdata = {
+ {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB92_GPIO_BTN_SW4,
+ .active_low = 1,
+ }, {
+ .desc = "sw5",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB92_GPIO_BTN_SW5,
+ .active_low = 1,
+ }
+};
+
+static void __init pb92_init(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, ~BIT(0));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(pb92_gpio_keys),
+ pb92_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c
new file mode 100644
index 000000000..ecdd7ea2e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c
@@ -0,0 +1,271 @@
+/*
+ * MikroTik RouterBOARD 2011 support
+ *
+ * Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "rb2011: " fmt
+
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/rle.h>
+#include <linux/routerboot.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "routerboot.h"
+
+#define RB2011_GPIO_NAND_NCE 14
+
+#define RB_ROUTERBOOT_OFFSET 0x0000
+#define RB_ROUTERBOOT_SIZE 0xb000
+#define RB_HARD_CFG_OFFSET 0xb000
+#define RB_HARD_CFG_SIZE 0x1000
+#define RB_BIOS_OFFSET 0xd000
+#define RB_BIOS_SIZE 0x2000
+#define RB_SOFT_CFG_OFFSET 0xf000
+#define RB_SOFT_CFG_SIZE 0x1000
+
+#define RB_ART_SIZE 0x10000
+
+static struct mtd_partition rb2011_spi_partitions[] = {
+ {
+ .name = "routerboot",
+ .offset = RB_ROUTERBOOT_OFFSET,
+ .size = RB_ROUTERBOOT_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "hard_config",
+ .offset = RB_HARD_CFG_OFFSET,
+ .size = RB_HARD_CFG_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "bios",
+ .offset = RB_BIOS_OFFSET,
+ .size = RB_BIOS_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "soft_config",
+ .offset = RB_SOFT_CFG_OFFSET,
+ .size = RB_SOFT_CFG_SIZE,
+ }
+};
+
+static struct mtd_partition rb2011_nand_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = (256 * 1024),
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = (256 * 1024),
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data rb2011_spi_flash_data = {
+ .parts = rb2011_spi_partitions,
+ .nr_parts = ARRAY_SIZE(rb2011_spi_partitions),
+};
+
+static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data rb2011_ar8327_data = {
+ .pad0_cfg = &rb2011_ar8327_pad0_cfg,
+ .cpuport_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ }
+};
+
+static struct mdio_board_info rb2011_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &rb2011_ar8327_data,
+ },
+};
+
+static void __init rb2011_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
+
+ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
+ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
+ AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
+ t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE;
+
+ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static void __init rb2011_wlan_init(void)
+{
+ u8 *hard_cfg = (u8 *) KSEG1ADDR(0x1f000000 + RB_HARD_CFG_OFFSET);
+ u16 tag_len;
+ u8 *tag;
+ char *art_buf;
+ u8 wlan_mac[ETH_ALEN];
+ int err;
+
+ err = routerboot_find_tag(hard_cfg, RB_HARD_CFG_SIZE, RB_ID_WLAN_DATA,
+ &tag, &tag_len);
+ if (err) {
+ pr_err("no calibration data found\n");
+ return;
+ }
+
+ art_buf = kmalloc(RB_ART_SIZE, GFP_KERNEL);
+ if (art_buf == NULL) {
+ pr_err("no memory for calibration data\n");
+ return;
+ }
+
+ err = rle_decode((char *) tag, tag_len, art_buf, RB_ART_SIZE,
+ NULL, NULL);
+ if (err) {
+ pr_err("unable to decode calibration data\n");
+ goto free;
+ }
+
+ ath79_init_mac(wlan_mac, ath79_mac_base, 11);
+ ath79_register_wmac(art_buf + 0x1000, wlan_mac);
+
+free:
+ kfree(art_buf);
+}
+
+static void rb2011_nand_select_chip(int chip_no)
+{
+ switch (chip_no) {
+ case 0:
+ gpio_set_value(RB2011_GPIO_NAND_NCE, 0);
+ break;
+ default:
+ gpio_set_value(RB2011_GPIO_NAND_NCE, 1);
+ break;
+ }
+ ndelay(500);
+}
+
+static struct nand_ecclayout rb2011_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static int rb2011_nand_scan_fixup(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (mtd->writesize == 512) {
+ /*
+ * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
+ * will not be able to find the kernel that we load.
+ */
+ chip->ecc.layout = &rb2011_nand_ecclayout;
+ }
+
+ return 0;
+}
+
+static void __init rb2011_nand_init(void)
+{
+ ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup);
+ ath79_nfc_set_parts(rb2011_nand_partitions,
+ ARRAY_SIZE(rb2011_nand_partitions));
+ ath79_nfc_set_select_chip(rb2011_nand_select_chip);
+ ath79_register_nfc();
+}
+
+static void __init rb2011_gpio_init(void)
+{
+ gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
+}
+
+static void __init rb2011_setup(void)
+{
+ rb2011_gpio_init();
+
+ ath79_register_m25p80(&rb2011_spi_flash_data);
+ rb2011_nand_init();
+
+ rb2011_gmac_setup();
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+
+ mdiobus_register_board_info(rb2011_mdio0_info,
+ ARRAY_SIZE(rb2011_mdio0_info));
+
+ /* GMAC0 is connected to an ar8327 switch */
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_2011L, "2011L", "MikroTik RouterBOARD 2011L",
+ rb2011_setup);
+
+static void __init rb2011g_setup(void)
+{
+ rb2011_setup();
+ rb2011_wlan_init();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_2011G, "2011G", "MikroTik RouterBOARD 2011UAS-2HnD",
+ rb2011g_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c
new file mode 100644
index 000000000..1604a5c56
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c
@@ -0,0 +1,405 @@
+/*
+ * MikroTik RouterBOARD 4xx series support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/rb4xx_cpld.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define RB4XX_GPIO_USER_LED 4
+#define RB4XX_GPIO_RESET_SWITCH 7
+
+#define RB4XX_GPIO_CPLD_BASE 32
+#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
+#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
+#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
+#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
+#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
+
+#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */
+#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL)
+
+static struct gpio_led rb4xx_leds_gpio[] __initdata = {
+ {
+ .name = "rb4xx:yellow:user",
+ .gpio = RB4XX_GPIO_USER_LED,
+ .active_low = 0,
+ }, {
+ .name = "rb4xx:green:led1",
+ .gpio = RB4XX_GPIO_CPLD_LED1,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led2",
+ .gpio = RB4XX_GPIO_CPLD_LED2,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led3",
+ .gpio = RB4XX_GPIO_CPLD_LED3,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led4",
+ .gpio = RB4XX_GPIO_CPLD_LED4,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led5",
+ .gpio = RB4XX_GPIO_CPLD_LED5,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
+ {
+ .desc = "reset_switch",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RB4XX_GPIO_RESET_SWITCH,
+ .active_low = 1,
+ }
+};
+
+static struct platform_device rb4xx_nand_device = {
+ .name = "rb4xx-nand",
+ .id = -1,
+};
+
+static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = {
+ {
+ .slot = 17,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(2),
+ }, {
+ .slot = 18,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(0),
+ }, {
+ .slot = 18,
+ .pin = 2,
+ .irq = ATH79_PCI_IRQ(1),
+ }, {
+ .slot = 19,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(1),
+ }, {
+ .slot = 19,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(2),
+ }
+};
+
+static struct mtd_partition rb4xx_partitions[] = {
+ {
+ .name = "routerboot",
+ .offset = 0,
+ .size = 0x0b000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "hard_config",
+ .offset = 0x0b000,
+ .size = 0x01000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "bios",
+ .offset = 0x0d000,
+ .size = 0x02000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "soft_config",
+ .offset = 0x0f000,
+ .size = 0x01000,
+ }
+};
+
+static struct flash_platform_data rb4xx_flash_data = {
+ .type = "pm25lv512",
+ .parts = rb4xx_partitions,
+ .nr_parts = ARRAY_SIZE(rb4xx_partitions),
+};
+
+static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
+ .gpio_base = RB4XX_GPIO_CPLD_BASE,
+};
+
+static struct mmc_spi_platform_data rb4xx_mmc_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct spi_board_info rb4xx_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = &rb4xx_flash_data,
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "spi-rb4xx-cpld",
+ .platform_data = &rb4xx_cpld_data,
+ }
+};
+
+static struct spi_board_info rb4xx_microsd_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 2,
+ .max_speed_hz = 25000000,
+ .modalias = "mmc_spi",
+ .platform_data = &rb4xx_mmc_data,
+ }
+};
+
+
+static struct resource rb4xx_spi_resources[] = {
+ {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device rb4xx_spi_device = {
+ .name = "rb4xx-spi",
+ .id = -1,
+ .resource = rb4xx_spi_resources,
+ .num_resources = ARRAY_SIZE(rb4xx_spi_resources),
+};
+
+static void __init rb4xx_generic_setup(void)
+{
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+ rb4xx_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rb4xx_gpio_keys),
+ rb4xx_gpio_keys);
+
+ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+ platform_device_register(&rb4xx_spi_device);
+ platform_device_register(&rb4xx_nand_device);
+}
+
+static void __init rb411_setup(void)
+{
+ rb4xx_generic_setup();
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+
+ ath79_register_mdio(0, 0xfffffffc);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = 0x00000003;
+
+ ath79_register_eth(0);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
+ rb411_setup);
+
+static void __init rb411u_setup(void)
+{
+ rb411_setup();
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
+ rb411u_setup);
+
+#define RB433_LAN_PHYMASK BIT(0)
+#define RB433_WAN_PHYMASK BIT(4)
+#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
+
+static void __init rb433_setup(void)
+{
+ rb4xx_generic_setup();
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+
+ ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
+ rb433_setup);
+
+static void __init rb433u_setup(void)
+{
+ rb433_setup();
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
+ rb433u_setup);
+
+#define RB450_LAN_PHYMASK BIT(0)
+#define RB450_WAN_PHYMASK BIT(4)
+#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
+
+static void __init rb450_generic_setup(int gige)
+{
+ rb4xx_generic_setup();
+ ath79_register_mdio(0, ~RB450_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth0_data.phy_if_mode = (gige) ?
+ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.phy_if_mode = (gige) ?
+ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK;
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+}
+
+static void __init rb450_setup(void)
+{
+ rb450_generic_setup(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
+ rb450_setup);
+
+static void __init rb450g_setup(void)
+{
+ rb450_generic_setup(1);
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
+ rb450g_setup);
+
+static void __init rb493_setup(void)
+{
+ rb4xx_generic_setup();
+
+ ath79_register_mdio(0, 0x3fffff00);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x00000001;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
+ rb493_setup);
+
+#define RB493G_GPIO_MDIO_MDC 7
+#define RB493G_GPIO_MDIO_DATA 8
+
+#define RB493G_MDIO_PHYMASK BIT(0)
+
+static struct mdio_gpio_platform_data rb493g_mdio_data = {
+ .mdc = RB493G_GPIO_MDIO_MDC,
+ .mdio = RB493G_GPIO_MDIO_DATA,
+
+ .phy_mask = ~RB493G_MDIO_PHYMASK,
+};
+
+static struct platform_device rb493g_mdio_device = {
+ .name = "mdio-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rb493g_mdio_data,
+ },
+};
+
+static void __init rb493g_setup(void)
+{
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+ rb4xx_leds_gpio);
+
+ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+ platform_device_register(&rb4xx_spi_device);
+ platform_device_register(&rb4xx_nand_device);
+
+ ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
+ ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ platform_device_register(&rb493g_mdio_device);
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
+ rb493g_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c
new file mode 100644
index 000000000..bee8bdf9c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c
@@ -0,0 +1,337 @@
+/*
+ * MikroTik RouterBOARD 750/750GL support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/ar8216_platform.h>
+#include <linux/rle.h>
+#include <linux/routerboot.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/mach-rb750.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-usb.h"
+#include "dev-eth.h"
+#include "machtypes.h"
+#include "routerboot.h"
+
+static struct rb750_led_data rb750_leds[] = {
+ {
+ .name = "rb750:green:act",
+ .mask = RB750_LED_ACT,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port1",
+ .mask = RB750_LED_PORT5,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port2",
+ .mask = RB750_LED_PORT4,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port3",
+ .mask = RB750_LED_PORT3,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port4",
+ .mask = RB750_LED_PORT2,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port5",
+ .mask = RB750_LED_PORT1,
+ .active_low = 1,
+ }
+};
+
+static struct rb750_led_data rb750gr3_leds[] = {
+ {
+ .name = "rb750:green:act",
+ .mask = RB7XX_LED_ACT,
+ .active_low = 1,
+ },
+};
+
+static struct rb750_led_platform_data rb750_leds_data;
+static struct platform_device rb750_leds_device = {
+ .name = "leds-rb750",
+ .dev = {
+ .platform_data = &rb750_leds_data,
+ }
+};
+
+static struct rb7xx_nand_platform_data rb750_nand_data;
+static struct platform_device rb750_nand_device = {
+ .name = "rb750-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &rb750_nand_data,
+ }
+};
+
+static void rb750_latch_change(u32 mask_clr, u32 mask_set)
+{
+ static DEFINE_SPINLOCK(lock);
+ static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
+ static u32 latch_oe;
+ static u32 latch_clr;
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&lock, flags);
+
+ if ((mask_clr & BIT(31)) != 0 &&
+ (latch_set & RB750_LVC573_LE) == 0) {
+ goto unlock;
+ }
+
+ latch_set = (latch_set | mask_set) & ~mask_clr;
+ latch_clr = (latch_clr | mask_clr) & ~mask_set;
+
+ if (latch_oe == 0)
+ latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
+
+ if (likely(latch_set & RB750_LVC573_LE)) {
+ void __iomem *base = ath79_gpio_base;
+
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ t |= mask_clr | latch_oe | mask_set;
+
+ __raw_writel(t, base + AR71XX_GPIO_REG_OE);
+ __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
+ __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
+ } else if (mask_clr & RB750_LVC573_LE) {
+ void __iomem *base = ath79_gpio_base;
+
+ latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
+ }
+
+unlock:
+ spin_unlock_irqrestore(&lock, flags);
+}
+
+static void rb750_nand_enable_pins(void)
+{
+ rb750_latch_change(RB750_LVC573_LE, 0);
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_SPI_EN);
+}
+
+static void rb750_nand_disable_pins(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
+ AR724X_GPIO_FUNC_JTAG_DISABLE);
+ rb750_latch_change(0, RB750_LVC573_LE);
+}
+
+static void __init rb750_setup(void)
+{
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ rb750_leds_data.num_leds = ARRAY_SIZE(rb750_leds);
+ rb750_leds_data.leds = rb750_leds;
+ rb750_leds_data.latch_change = rb750_latch_change;
+ platform_device_register(&rb750_leds_device);
+
+ rb750_nand_data.nce_line = RB750_NAND_NCE;
+ rb750_nand_data.enable_pins = rb750_nand_enable_pins;
+ rb750_nand_data.disable_pins = rb750_nand_disable_pins;
+ rb750_nand_data.latch_change = rb750_latch_change;
+ platform_device_register(&rb750_nand_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
+ rb750_setup);
+
+static struct ar8327_pad_cfg rb750gr3_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data rb750gr3_ar8327_data = {
+ .pad0_cfg = &rb750gr3_ar8327_pad0_cfg,
+ .cpuport_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_100,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ }
+};
+
+static struct mdio_board_info rb750g3_mdio_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &rb750gr3_ar8327_data,
+ },
+};
+
+static void rb750gr3_nand_enable_pins(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_SPI_EN |
+ AR724X_GPIO_FUNC_SPI_CS_EN2);
+}
+
+static void rb750gr3_nand_disable_pins(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN |
+ AR724X_GPIO_FUNC_SPI_CS_EN2,
+ AR724X_GPIO_FUNC_JTAG_DISABLE);
+}
+
+static void rb750gr3_latch_change(u32 mask_clr, u32 mask_set)
+{
+ static DEFINE_SPINLOCK(lock);
+ static u32 latch_set = RB7XX_LED_ACT;
+ static u32 latch_clr;
+ void __iomem *base = ath79_gpio_base;
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&lock, flags);
+
+ latch_set = (latch_set | mask_set) & ~mask_clr;
+ latch_clr = (latch_clr | mask_clr) & ~mask_set;
+
+ mask_set = latch_set & (RB7XX_USB_POWERON | RB7XX_MONITOR);
+ mask_clr = latch_clr & (RB7XX_USB_POWERON | RB7XX_MONITOR);
+
+ if ((latch_set ^ RB7XX_LED_ACT) & RB7XX_LED_ACT) {
+ /* enable output mode */
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ t |= RB7XX_LED_ACT;
+ __raw_writel(t, base + AR71XX_GPIO_REG_OE);
+
+ mask_clr |= RB7XX_LED_ACT;
+ } else {
+ /* disable output mode */
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ t &= ~RB7XX_LED_ACT;
+ __raw_writel(t, base + AR71XX_GPIO_REG_OE);
+ }
+
+ __raw_writel(mask_set, base + AR71XX_GPIO_REG_SET);
+ __raw_writel(mask_clr, base + AR71XX_GPIO_REG_CLEAR);
+
+ spin_unlock_irqrestore(&lock, flags);
+}
+
+static void __init rb750gr3_setup(void)
+{
+ ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(rb750g3_mdio_info,
+ ARRAY_SIZE(rb750g3_mdio_info));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ rb750_leds_data.num_leds = ARRAY_SIZE(rb750gr3_leds);
+ rb750_leds_data.leds = rb750gr3_leds;
+ rb750_leds_data.latch_change = rb750gr3_latch_change;
+ platform_device_register(&rb750_leds_device);
+
+ rb750_nand_data.nce_line = RB7XX_NAND_NCE;
+ rb750_nand_data.enable_pins = rb750gr3_nand_enable_pins;
+ rb750_nand_data.disable_pins = rb750gr3_nand_disable_pins;
+ rb750_nand_data.latch_change = rb750gr3_latch_change;
+ platform_device_register(&rb750_nand_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL",
+ rb750gr3_setup);
+
+#define RB751_HARDCONFIG 0x1f00b000
+#define RB751_HARDCONFIG_SIZE 0x1000
+#define RB751_MAC_ADDRESS_OFFSET 0xE80
+
+static void __init rb751_wlan_setup(void)
+{
+ u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG);
+ struct ath9k_platform_data *wmac_data;
+ u16 tag_len;
+ u8 *tag;
+ int err;
+
+ wmac_data = ap9x_pci_get_wmac_data(0);
+ if (!wmac_data) {
+ pr_err("rb75x: unable to get address of wlan data\n");
+ return;
+ }
+
+ ap9x_pci_setup_wmac_led_pin(0, 9);
+
+ err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
+ RB_ID_WLAN_DATA, &tag, &tag_len);
+ if (err) {
+ pr_err("rb75x: no calibration data found\n");
+ return;
+ }
+
+ err = rle_decode(tag, tag_len, (unsigned char *) wmac_data->eeprom_data,
+ sizeof(wmac_data->eeprom_data), NULL, NULL);
+ if (err) {
+ pr_err("rb75x: unable to decode wlan eeprom data\n");
+ return;
+ }
+
+ ap91_pci_init(NULL, hardconfig + RB751_MAC_ADDRESS_OFFSET);
+}
+
+static void __init rb751_setup(void)
+{
+ rb750_setup();
+ ath79_register_usb();
+ rb751_wlan_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_751, "751", "MikroTik RouterBOARD 751",
+ rb751_setup);
+
+static void __init rb751g_setup(void)
+{
+ rb750gr3_setup();
+ ath79_register_usb();
+ rb751_wlan_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_751G, "751g", "MikroTik RouterBOARD 751G",
+ rb751g_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c
new file mode 100644
index 000000000..28d9de4f3
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c
@@ -0,0 +1,100 @@
+/*
+ * Redwave RW2458N support
+ *
+ * Copyright (C) 2011-2012 Cezary Jackiewicz <cezary@eko.one.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define RW2458N_GPIO_LED_D3 1
+#define RW2458N_GPIO_LED_D4 0
+#define RW2458N_GPIO_LED_D5 11
+#define RW2458N_GPIO_LED_D6 7
+#define RW2458N_GPIO_BTN_RESET 12
+
+#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL)
+
+static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RW2458N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+#define RW2458N_WAN_PHYMASK BIT(4)
+
+static struct gpio_led rw2458n_leds_gpio[] __initdata = {
+ {
+ .name = "rw2458n:green:d3",
+ .gpio = RW2458N_GPIO_LED_D3,
+ .active_low = 1,
+ }, {
+ .name = "rw2458n:green:d4",
+ .gpio = RW2458N_GPIO_LED_D4,
+ .active_low = 1,
+ }, {
+ .name = "rw2458n:green:d5",
+ .gpio = RW2458N_GPIO_LED_D5,
+ .active_low = 1,
+ }, {
+ .name = "rw2458n:green:d6",
+ .gpio = RW2458N_GPIO_LED_D6,
+ .active_low = 1,
+ }
+};
+
+static const char *rw2458n_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data rw2458n_flash_data = {
+ .part_probes = rw2458n_part_probes,
+};
+
+static void __init rw2458n_setup(void)
+{
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&rw2458n_flash_data);
+
+ ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio),
+ rw2458n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rw2458n_gpio_keys),
+ rw2458n_gpio_keys);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N",
+ rw2458n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c
new file mode 100644
index 000000000..b76d4a7a0
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c
@@ -0,0 +1,109 @@
+/*
+ * TrendNET TEW-632BRP board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define TEW_632BRP_GPIO_LED_STATUS 1
+#define TEW_632BRP_GPIO_LED_WPS 3
+#define TEW_632BRP_GPIO_LED_WLAN 6
+#define TEW_632BRP_GPIO_BTN_WPS 12
+#define TEW_632BRP_GPIO_BTN_RESET 21
+
+#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL)
+
+#define TEW_632BRP_CONFIG_ADDR 0x1f020000
+#define TEW_632BRP_CONFIG_SIZE 0x10000
+
+static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
+ {
+ .name = "tew-632brp:green:status",
+ .gpio = TEW_632BRP_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "tew-632brp:blue:wps",
+ .gpio = TEW_632BRP_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "tew-632brp:green:wlan",
+ .gpio = TEW_632BRP_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_632BRP_GPIO_BTN_RESET,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_632BRP_GPIO_BTN_WPS,
+ }
+};
+
+#define TEW_632BRP_LAN_PHYMASK BIT(0)
+#define TEW_632BRP_WAN_PHYMASK BIT(4)
+#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \
+ TEW_632BRP_WAN_PHYMASK))
+
+static void __init tew_632brp_setup(void)
+{
+ const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+ u8 *wlan_mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE,
+ "lan_mac=", mac) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ wlan_mac = mac;
+ }
+
+ ath79_register_mdio(0, TEW_632BRP_MDIO_MASK);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
+ tew_632brp_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew_632brp_gpio_keys),
+ tew_632brp_gpio_keys);
+
+ ath79_register_wmac(eeprom, wlan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",
+ tew_632brp_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c
new file mode 100644
index 000000000..207384f99
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c
@@ -0,0 +1,210 @@
+/*
+ * TRENDnet TEW-673GRU board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define TEW673GRU_GPIO_LCD_SCK 0
+#define TEW673GRU_GPIO_LCD_MOSI 1
+#define TEW673GRU_GPIO_LCD_MISO 2
+#define TEW673GRU_GPIO_LCD_CS 6
+
+#define TEW673GRU_GPIO_LED_WPS 9
+
+#define TEW673GRU_GPIO_BTN_RESET 3
+#define TEW673GRU_GPIO_BTN_WPS 8
+
+#define TEW673GRU_GPIO_RTL8366_SDA 5
+#define TEW673GRU_GPIO_RTL8366_SCK 7
+
+#define TEW673GRU_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL)
+
+#define TEW673GRU_CAL0_OFFSET 0x1000
+#define TEW673GRU_CAL1_OFFSET 0x5000
+#define TEW673GRU_MAC0_OFFSET 0xffa0
+#define TEW673GRU_MAC1_OFFSET 0xffb4
+
+#define TEW673GRU_CAL_LOCATION_0 0x1f660000
+#define TEW673GRU_CAL_LOCATION_1 0x1f7f0000
+
+static struct gpio_led tew673gru_leds_gpio[] __initdata = {
+ {
+ .name = "trendnet:blue:wps",
+ .gpio = TEW673GRU_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW673GRU_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW673GRU_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = {
+ { .reg = 0x06, .val = 0x0108 },
+};
+
+static struct rtl8366_platform_data tew673gru_rtl8366s_data = {
+ .gpio_sda = TEW673GRU_GPIO_RTL8366_SDA,
+ .gpio_sck = TEW673GRU_GPIO_RTL8366_SCK,
+ .num_initvals = ARRAY_SIZE(tew673gru_rtl8366s_initvals),
+ .initvals = tew673gru_rtl8366s_initvals,
+};
+
+static struct platform_device tew673gru_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tew673gru_rtl8366s_data,
+ }
+};
+
+static struct spi_board_info tew673gru_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 400000,
+ .modalias = "spidev",
+ .mode = SPI_MODE_2,
+ .controller_data = (void *) TEW673GRU_GPIO_LCD_CS,
+ },
+};
+
+static struct spi_gpio_platform_data tew673gru_spi_data = {
+ .sck = TEW673GRU_GPIO_LCD_SCK,
+ .miso = TEW673GRU_GPIO_LCD_MISO,
+ .mosi = TEW673GRU_GPIO_LCD_MOSI,
+ .num_chipselect = 1,
+};
+
+static struct platform_device tew673gru_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &tew673gru_spi_data,
+ },
+};
+
+static void tew673gru_read_ascii_mac(u8 *dest, u8 *src)
+{
+ int ret;
+
+ ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &dest[0], &dest[1], &dest[2],
+ &dest[3], &dest[4], &dest[5]);
+
+ if (ret != ETH_ALEN)
+ memset(dest, 0, ETH_ALEN);
+}
+
+static bool __init tew673gru_is_caldata_valid(u8 *p)
+{
+ u16 *magic0, *magic1;
+
+ magic0 = (u16 *)(p + TEW673GRU_CAL0_OFFSET);
+ magic1 = (u16 *)(p + TEW673GRU_CAL1_OFFSET);
+
+ return (*magic0 == 0xa55a && *magic1 == 0xa55a);
+}
+
+static void __init tew673gru_wlan_init(void)
+{
+ u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
+ u8 *caldata;
+
+ caldata = (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0);
+ if (!tew673gru_is_caldata_valid(caldata)) {
+ caldata = (u8 *)KSEG1ADDR(TEW673GRU_CAL_LOCATION_1);
+ if (!tew673gru_is_caldata_valid(caldata)) {
+ pr_err("no calibration data found\n");
+ return;
+ }
+ }
+
+ tew673gru_read_ascii_mac(mac1, caldata + TEW673GRU_MAC0_OFFSET);
+ tew673gru_read_ascii_mac(mac2, caldata + TEW673GRU_MAC1_OFFSET);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap94_pci_init(caldata + TEW673GRU_CAL0_OFFSET, mac1,
+ caldata + TEW673GRU_CAL1_OFFSET, mac2);
+}
+
+static void __init tew673gru_setup(void)
+{
+ tew673gru_wlan_init();
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+
+ ath79_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+ ath79_eth1_pll_data.pll_1000 = 0x11110000;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio),
+ tew673gru_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew673gru_gpio_keys),
+ tew673gru_gpio_keys);
+
+ ath79_register_usb();
+
+ platform_device_register(&tew673gru_rtl8366s_device);
+
+ spi_register_board_info(tew673gru_spi_info,
+ ARRAY_SIZE(tew673gru_spi_info));
+ platform_device_register(&tew673gru_spi_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU",
+ tew673gru_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c
new file mode 100644
index 000000000..b0bc51bfe
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c
@@ -0,0 +1,163 @@
+/*
+ * TRENDnet TEW-712BR board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TEW_712BR_GPIO_BTN_WPS 11
+#define TEW_712BR_GPIO_BTN_RESET 12
+
+#define TEW_712BR_GPIO_LED_LAN1 13
+#define TEW_712BR_GPIO_LED_LAN2 14
+#define TEW_712BR_GPIO_LED_LAN3 15
+#define TEW_712BR_GPIO_LED_LAN4 16
+#define TEW_712BR_GPIO_LED_POWER_GREEN 20
+#define TEW_712BR_GPIO_LED_POWER_ORANGE 27
+#define TEW_712BR_GPIO_LED_WAN_GREEN 17
+#define TEW_712BR_GPIO_LED_WAN_ORANGE 23
+#define TEW_712BR_GPIO_LED_WLAN 0
+#define TEW_712BR_GPIO_LED_WPS 26
+
+#define TEW_712BR_GPIO_WAN_LED_ENABLE 1
+
+#define TEW_712BR_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW_712BR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_712BR_KEYS_POLL_INTERVAL)
+
+#define TEW_712BR_ART_ADDRESS 0x1f010000
+#define TEW_712BR_CALDATA_OFFSET 0x1000
+#define TEW_712BR_LAN_MAC_ADDRESS 0x1f020004
+#define TEW_712BR_WAN_MAC_ADDRESS 0x1f020016
+
+static struct gpio_led tew_712br_leds_gpio[] __initdata = {
+ {
+ .name = "trendnet:green:lan1",
+ .gpio = TEW_712BR_GPIO_LED_LAN1,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:lan2",
+ .gpio = TEW_712BR_GPIO_LED_LAN2,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:lan3",
+ .gpio = TEW_712BR_GPIO_LED_LAN3,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:lan4",
+ .gpio = TEW_712BR_GPIO_LED_LAN4,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:blue:wps",
+ .gpio = TEW_712BR_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "trendnet:green:power",
+ .gpio = TEW_712BR_GPIO_LED_POWER_GREEN,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:orange:power",
+ .gpio = TEW_712BR_GPIO_LED_POWER_ORANGE,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:wan",
+ .gpio = TEW_712BR_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "trendnet:orange:wan",
+ .gpio = TEW_712BR_GPIO_LED_WAN_ORANGE,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:wlan",
+ .gpio = TEW_712BR_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tew_712br_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_712BR_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_712BR_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init tew_712br_read_ascii_mac(u8 *dest, unsigned int src_addr)
+{
+ int ret;
+ u8 *src = (u8 *)KSEG1ADDR(src_addr);
+
+ ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &dest[0], &dest[1], &dest[2],
+ &dest[3], &dest[4], &dest[5]);
+
+ if (ret != ETH_ALEN)
+ memset(dest, 0, ETH_ALEN);
+}
+
+static void __init tew_712br_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(TEW_712BR_ART_ADDRESS);
+ u8 lan_mac[ETH_ALEN];
+ u8 wan_mac[ETH_ALEN];
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ gpio_request_one(TEW_712BR_GPIO_WAN_LED_ENABLE,
+ GPIOF_OUT_INIT_LOW, "WAN LED enable");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_712br_leds_gpio),
+ tew_712br_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TEW_712BR_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew_712br_gpio_keys),
+ tew_712br_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ tew_712br_read_ascii_mac(lan_mac, TEW_712BR_LAN_MAC_ADDRESS);
+ tew_712br_read_ascii_mac(wan_mac, TEW_712BR_WAN_MAC_ADDRESS);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + TEW_712BR_CALDATA_OFFSET, wan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_712BR, "TEW-712BR",
+ "TRENDnet TEW-712BR", tew_712br_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c
new file mode 100644
index 000000000..6b2820711
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c
@@ -0,0 +1,130 @@
+/*
+ * TP-LINK TL-MR11U/TL-MR3040 board support
+ *
+ * Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_MR11U_GPIO_LED_3G 27
+#define TL_MR11U_GPIO_LED_WLAN 26
+#define TL_MR11U_GPIO_LED_LAN 17
+
+#define TL_MR11U_GPIO_BTN_WPS 20
+#define TL_MR11U_GPIO_BTN_RESET 11
+
+#define TL_MR11U_GPIO_USB_POWER 8
+#define TL_MR3040_GPIO_USB_POWER 18
+
+#define TL_MR11U_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR11U_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr11u_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr11u_flash_data = {
+ .part_probes = tl_mr11u_part_probes,
+};
+
+static struct gpio_led tl_mr11u_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR11U_GPIO_LED_3G,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_MR11U_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_MR11U_GPIO_LED_LAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR11U_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR11U_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+};
+
+static void __init common_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_setup_ar933x_phy4_switch(false, true);
+
+ ath79_register_m25p80(&tl_mr11u_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio),
+ tl_mr11u_leds_gpio);
+
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init tl_mr11u_setup(void)
+{
+ common_setup();
+
+ ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr11u_gpio_keys),
+ tl_mr11u_gpio_keys);
+ ath79_set_usb_power_gpio(TL_MR11U_GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "USB power");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U",
+ tl_mr11u_setup);
+
+static void __init tl_mr3040_setup(void)
+{
+ common_setup();
+
+ ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
+ 1, tl_mr11u_gpio_keys);
+ ath79_set_usb_power_gpio(TL_MR3040_GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "USB power");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3040, "TL-MR3040", "TP-LINK TL-MR3040",
+ tl_mr3040_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c
new file mode 100644
index 000000000..8f37d7a87
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c
@@ -0,0 +1,125 @@
+/*
+ * TP-LINK TL-MR3020 board support
+ *
+ * Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_MR3020_GPIO_LED_3G 27
+#define TL_MR3020_GPIO_LED_WLAN 0
+#define TL_MR3020_GPIO_LED_LAN 17
+#define TL_MR3020_GPIO_LED_WPS 26
+
+#define TL_MR3020_GPIO_BTN_WPS 11
+#define TL_MR3020_GPIO_BTN_SW1 18
+#define TL_MR3020_GPIO_BTN_SW2 20
+
+#define TL_MR3020_GPIO_USB_POWER 8
+
+#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr3020_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr3020_flash_data = {
+ .part_probes = tl_mr3020_part_probes,
+};
+
+static struct gpio_led tl_mr3020_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR3020_GPIO_LED_3G,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_MR3020_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_MR3020_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wps",
+ .gpio = TL_MR3020_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3020_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3020_GPIO_BTN_SW1,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw2",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3020_GPIO_BTN_SW2,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_mr3020_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_setup_ar933x_phy4_switch(false, true);
+
+ ath79_register_m25p80(&tl_mr3020_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio),
+ tl_mr3020_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3020_gpio_keys),
+ tl_mr3020_gpio_keys);
+
+ ath79_set_usb_power_gpio(TL_MR3020_GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020",
+ tl_mr3020_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c
new file mode 100644
index 000000000..b35f09f8a
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c
@@ -0,0 +1,146 @@
+/*
+ * TP-LINK TL-MR3220/3420 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define TL_MR3X20_GPIO_LED_QSS 0
+#define TL_MR3X20_GPIO_LED_SYSTEM 1
+#define TL_MR3X20_GPIO_LED_3G 8
+
+#define TL_MR3X20_GPIO_BTN_RESET 11
+#define TL_MR3X20_GPIO_BTN_QSS 12
+
+#define TL_MR3X20_GPIO_USB_POWER 6
+
+#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr3x20_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr3x20_flash_data = {
+ .part_probes = tl_mr3x20_part_probes,
+};
+
+static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_MR3X20_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_MR3X20_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR3X20_GPIO_LED_3G,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3X20_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3X20_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_ap99_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_mr3x20_flash_data);
+
+ ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3x20_gpio_keys),
+ tl_mr3x20_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap91_pci_init(ee, mac);
+}
+
+static void __init tl_mr3x20_usb_setup(void)
+{
+ /* enable power for the USB port */
+ ath79_set_usb_power_gpio(TL_MR3X20_GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "USB power");
+ ath79_register_usb();
+}
+
+static void __init tl_mr3220_setup(void)
+{
+ tl_ap99_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
+ tl_mr3x20_leds_gpio);
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ tl_mr3x20_usb_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220",
+ tl_mr3220_setup);
+
+static void __init tl_mr3420_setup(void)
+{
+ tl_ap99_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
+ tl_mr3x20_leds_gpio);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+ tl_mr3x20_usb_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
+ tl_mr3420_setup);
+
+static void __init tl_wr841n_v7_setup(void)
+{
+ tl_ap99_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1,
+ tl_mr3x20_leds_gpio);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7",
+ "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c
new file mode 100644
index 000000000..b4fb2a9f9
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c
@@ -0,0 +1,104 @@
+/*
+ * TP-LINK TL-WA901N/ND v2 board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
+ * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WA901ND_V2_GPIO_LED_QSS 4
+#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2
+#define TL_WA901ND_V2_GPIO_LED_WLAN 9
+
+#define TL_WA901ND_V2_GPIO_BTN_RESET 3
+#define TL_WA901ND_V2_GPIO_BTN_QSS 7
+
+#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa901nd_v2_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wa901nd_v2_flash_data = {
+ .part_probes = tl_wa901nd_v2_part_probes,
+};
+
+static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WA901ND_V2_GPIO_LED_QSS,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WA901ND_V2_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_V2_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wa901nd_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = 0x00001000;
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
+ AR71XX_RESET_GE0_PHY;
+ ath79_register_eth(0);
+
+ ath79_register_m25p80(&tl_wa901nd_v2_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio),
+ tl_wa901nd_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa901nd_v2_gpio_keys),
+ tl_wa901nd_v2_gpio_keys);
+
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2",
+ "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c
new file mode 100644
index 000000000..2f4e0c047
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c
@@ -0,0 +1,109 @@
+/*
+ * TP-LINK TL-WA901N/ND v1 board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define TL_WA901ND_GPIO_LED_QSS 0
+#define TL_WA901ND_GPIO_LED_SYSTEM 1
+#define TL_WA901ND_GPIO_LED_LAN 13
+
+#define TL_WA901ND_GPIO_BTN_RESET 11
+#define TL_WA901ND_GPIO_BTN_QSS 12
+
+#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa901nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wa901nd_flash_data = {
+ .part_probes = tl_wa901nd_part_probes,
+};
+
+static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_WA901ND_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WA901ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WA901ND_GPIO_LED_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wa901nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ /*
+ * ath79_eth0 would be the WAN port, but is not connected on
+ * the TL-WA901ND. ath79_eth1 connects to the internal switch chip,
+ * however we have a single LAN port only.
+ */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&tl_wa901nd_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
+ tl_wa901nd_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa901nd_gpio_keys),
+ tl_wa901nd_gpio_keys);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
+ tl_wa901nd_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c
new file mode 100644
index 000000000..331de5680
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c
@@ -0,0 +1,204 @@
+/*
+ * TP-LINK TL-WDR4300 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WDR4300_GPIO_LED_USB1 11
+#define WDR4300_GPIO_LED_USB2 12
+#define WDR4300_GPIO_LED_WLAN2G 13
+#define WDR4300_GPIO_LED_SYSTEM 14
+#define WDR4300_GPIO_LED_QSS 15
+
+#define WDR4300_GPIO_BTN_WPS 16
+#define WDR4300_GPIO_BTN_RFKILL 17
+
+#define WDR4300_GPIO_USB1_POWER 22
+#define WDR4300_GPIO_USB2_POWER 21
+
+#define WDR4300_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WDR4300_KEYS_DEBOUNCE_INTERVAL (3 * WDR4300_KEYS_POLL_INTERVAL)
+
+#define WDR4300_MAC0_OFFSET 0
+#define WDR4300_MAC1_OFFSET 6
+#define WDR4300_WMAC_CALDATA_OFFSET 0x1000
+#define WDR4300_PCIE_CALDATA_OFFSET 0x5000
+
+static const char *wdr4300_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data wdr4300_flash_data = {
+ .part_probes = wdr4300_part_probes,
+};
+
+static struct gpio_led wdr4300_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:qss",
+ .gpio = WDR4300_GPIO_LED_QSS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:system",
+ .gpio = WDR4300_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb1",
+ .gpio = WDR4300_GPIO_LED_USB1,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb2",
+ .gpio = WDR4300_GPIO_LED_USB2,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:wlan2g",
+ .gpio = WDR4300_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wdr4300_gpio_keys[] __initdata = {
+ {
+ .desc = "QSS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WDR4300_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL switch",
+ .type = EV_SW,
+ .code = KEY_RFKILL,
+ .debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WDR4300_GPIO_BTN_RFKILL,
+ },
+};
+
+static struct ar8327_pad_cfg wdr4300_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg wdr4300_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc737c737,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static struct ar8327_platform_data wdr4300_ar8327_data = {
+ .pad0_cfg = &wdr4300_ar8327_pad0_cfg,
+ .cpuport_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &wdr4300_ar8327_led_cfg,
+};
+
+static struct mdio_board_info wdr4300_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wdr4300_ar8327_data,
+ },
+};
+
+static void __init wdr4300_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
+
+ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
+ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
+ AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
+ t |= AR934X_ETH_CFG_RGMII_GMAC0;
+
+ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static void __init wdr4300_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&wdr4300_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr4300_leds_gpio),
+ wdr4300_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WDR4300_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wdr4300_gpio_keys),
+ wdr4300_gpio_keys);
+
+ ath79_init_mac(tmpmac, mac, -1);
+ ath79_register_wmac(art + WDR4300_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ath79_init_mac(tmpmac, mac, 0);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+ ap91_pci_init(art + WDR4300_PCIE_CALDATA_OFFSET, tmpmac);
+
+ wdr4300_gmac_setup();
+
+ mdiobus_register_board_info(wdr4300_mdio0_info,
+ ARRAY_SIZE(wdr4300_mdio0_info));
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2);
+
+ /* GMAC0 is connected to an AR8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ ath79_set_usb_power_gpio(WDR4300_GPIO_USB1_POWER, GPIOF_OUT_INIT_HIGH,
+ "USB1 power");
+ ath79_set_usb_power_gpio(WDR4300_GPIO_USB2_POWER, GPIOF_OUT_INIT_HIGH,
+ "USB2 power");
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WDR4300, "TL-WDR4300",
+ "TP-LINK TL-WDR3600/4300/4310",
+ wdr4300_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c
new file mode 100644
index 000000000..ed5b2b0e6
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c
@@ -0,0 +1,154 @@
+/*
+ * TP-LINK TL-WR1041 v2 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2011-2012 Anan Huang <axishero@foxmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR1041NV2_GPIO_BTN_RESET 14
+#define TL_WR1041NV2_GPIO_LED_WPS 13
+#define TL_WR1041NV2_GPIO_LED_WLAN 11
+
+#define TL_WR1041NV2_GPIO_LED_SYSTEM 12
+
+#define TL_WR1041NV2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1041NV2_KEYS_POLL_INTERVAL)
+
+#define TL_WR1041NV2_PCIE_CALDATA_OFFSET 0x5000
+
+static const char *tl_wr1041nv2_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr1041nv2_flash_data = {
+ .part_probes = tl_wr1041nv2_part_probes,
+};
+
+static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR1041NV2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wps",
+ .gpio = TL_WR1041NV2_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR1041NV2_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1041NV2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data db120_ar8327_data = {
+ .pad0_cfg = &db120_ar8327_pad0_cfg,
+ .cpuport_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ }
+};
+
+static struct mdio_board_info db120_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &db120_ar8327_data,
+ },
+};
+
+static void __init db120_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
+
+ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
+ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
+ AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
+ t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE;
+
+ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static void __init tl_wr1041nv2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr1041nv2_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio),
+ tl_wr1041nv2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1041nv2_gpio_keys),
+ tl_wr1041nv2_gpio_keys);
+ ath79_register_wmac(ee, mac);
+
+ db120_gmac_setup();
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+
+ mdiobus_register_board_info(db120_mdio0_info,
+ ARRAY_SIZE(db120_mdio0_info));
+
+ /* GMAC0 is connected to an AR8327 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2",
+ "TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c
new file mode 100644
index 000000000..61aeb52d0
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c
@@ -0,0 +1,141 @@
+/*
+ * TP-LINK TL-WR1043N/ND board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR1043ND_GPIO_LED_USB 1
+#define TL_WR1043ND_GPIO_LED_SYSTEM 2
+#define TL_WR1043ND_GPIO_LED_QSS 5
+#define TL_WR1043ND_GPIO_LED_WLAN 9
+
+#define TL_WR1043ND_GPIO_BTN_RESET 3
+#define TL_WR1043ND_GPIO_BTN_QSS 7
+
+#define TL_WR1043ND_GPIO_RTL8366_SDA 18
+#define TL_WR1043ND_GPIO_RTL8366_SCK 19
+
+#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr1043nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr1043nd_flash_data = {
+ .part_probes = tl_wr1043nd_part_probes,
+};
+
+static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:usb",
+ .gpio = TL_WR1043ND_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR1043ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR1043ND_GPIO_LED_QSS,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR1043ND_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void tl_wr1043nd_rtl8366rb_hw_reset(bool active)
+{
+ if (active)
+ ath79_device_reset_set(AR71XX_RESET_GE0_PHY);
+ else
+ ath79_device_reset_clear(AR71XX_RESET_GE0_PHY);
+}
+
+static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = {
+ .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA,
+ .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK,
+ .hw_reset = tl_wr1043nd_rtl8366rb_hw_reset,
+};
+
+static struct platform_device tl_wr1043nd_rtl8366rb_device = {
+ .name = RTL8366RB_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tl_wr1043nd_rtl8366rb_data,
+ }
+};
+
+static void __init tl_wr1043nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ tl_wr1043nd_rtl8366rb_hw_reset(true);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x1a000000;
+
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(&tl_wr1043nd_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
+ tl_wr1043nd_leds_gpio);
+
+ platform_device_register(&tl_wr1043nd_rtl8366rb_device);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1043nd_gpio_keys),
+ tl_wr1043nd_gpio_keys);
+
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",
+ tl_wr1043nd_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c
new file mode 100644
index 000000000..8f6db5eda
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c
@@ -0,0 +1,156 @@
+/*
+ * TP-LINK TL-WR2543N/ND board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/rtl8367.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define TL_WR2543N_GPIO_LED_WPS 0
+#define TL_WR2543N_GPIO_LED_USB 8
+
+/* The WLAN LEDs use GPIOs on the discrete AR9380 wmac */
+#define TL_WR2543N_GPIO_WMAC_LED_WLAN2G 0
+#define TL_WR2543N_GPIO_WMAC_LED_WLAN5G 1
+
+#define TL_WR2543N_GPIO_BTN_RESET 11
+#define TL_WR2543N_GPIO_BTN_WPS 12
+
+#define TL_WR2543N_GPIO_RTL8367_SDA 1
+#define TL_WR2543N_GPIO_RTL8367_SCK 6
+
+#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr2543n_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr2543n_flash_data = {
+ .part_probes = tl_wr2543n_part_probes,
+};
+
+static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:usb",
+ .gpio = TL_WR2543N_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wps",
+ .gpio = TL_WR2543N_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led tl_wr2543n_wmac_leds_gpio[] = {
+ {
+ .name = "tp-link:green:wlan5g",
+ .gpio = TL_WR2543N_GPIO_WMAC_LED_WLAN5G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR2543N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR2543N_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = {
+ .mode = RTL8367_EXTIF_MODE_RGMII,
+ .txdelay = 1,
+ .rxdelay = 0,
+ .ability = {
+ .force_mode = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ .link = 1,
+ .duplex = 1,
+ .speed = RTL8367_PORT_SPEED_1000,
+ },
+};
+
+static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = {
+ .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA,
+ .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK,
+ .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg,
+};
+
+static struct platform_device tl_wr2543n_rtl8367_device = {
+ .name = RTL8367_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tl_wr2543n_rtl8367_data,
+ }
+};
+
+static void __init tl_wr2543n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr2543n_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio),
+ tl_wr2543n_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr2543n_gpio_keys),
+ tl_wr2543n_gpio_keys);
+ ath79_register_usb();
+
+ /*
+ * The ath9k driver uses this pin for its default led device, which is
+ * named ath9k-phy0, and reflects activity on either the 2 GHz or 5 GHz
+ * bands. This pin is connected to the WR2543's 2GHz WLAN LED.
+ */
+ ap9x_pci_setup_wmac_led_pin(0, TL_WR2543N_GPIO_WMAC_LED_WLAN2G);
+
+ /*
+ * We also have the driver set up an led device for the WR2543's
+ * separate 5 GHz WLAN LED in case the user wants it.
+ */
+ ap9x_pci_setup_wmac_leds(0, tl_wr2543n_wmac_leds_gpio,
+ ARRAY_SIZE(tl_wr2543n_wmac_leds_gpio));
+ ap91_pci_init(eeprom, mac);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+ ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x1a000000;
+
+ ath79_register_eth(0);
+
+ platform_device_register(&tl_wr2543n_rtl8367_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND",
+ tl_wr2543n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c
new file mode 100644
index 000000000..f60f96245
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c
@@ -0,0 +1,85 @@
+/*
+ * TP-LINK TL-WR703N board support
+ *
+ * Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR703N_GPIO_LED_SYSTEM 27
+#define TL_WR703N_GPIO_BTN_RESET 11
+
+#define TL_WR703N_GPIO_USB_POWER 8
+
+#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr703n_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr703n_flash_data = {
+ .part_probes = tl_wr703n_part_probes,
+};
+
+static struct gpio_led tl_wr703n_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:system",
+ .gpio = TL_WR703N_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR703N_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_wr703n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr703n_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio),
+ tl_wr703n_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr703n_gpio_keys),
+ tl_wr703n_gpio_keys);
+
+ ath79_set_usb_power_gpio(TL_WR703N_GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1",
+ tl_wr703n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
new file mode 100644
index 000000000..0d758913f
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
@@ -0,0 +1,135 @@
+/*
+ * TP-LINK TL-WR741ND v4 board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR741NDV4_GPIO_BTN_RESET 11
+#define TL_WR741NDV4_GPIO_BTN_WPS 26
+
+#define TL_WR741NDV4_GPIO_LED_WLAN 0
+#define TL_WR741NDV4_GPIO_LED_QSS 1
+#define TL_WR741NDV4_GPIO_LED_WAN 13
+#define TL_WR741NDV4_GPIO_LED_LAN1 14
+#define TL_WR741NDV4_GPIO_LED_LAN2 15
+#define TL_WR741NDV4_GPIO_LED_LAN3 16
+#define TL_WR741NDV4_GPIO_LED_LAN4 17
+
+#define TL_WR741NDV4_GPIO_LED_SYSTEM 27
+
+#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr741ndv4_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr741ndv4_flash_data = {
+ .part_probes = tl_wr741ndv4_part_probes,
+};
+
+static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN1,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN2,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN3,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR741NDV4_GPIO_LED_QSS,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR741NDV4_GPIO_LED_WAN,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR741NDV4_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741NDV4_GPIO_BTN_RESET,
+ .active_low = 0,
+ }, {
+ .desc = "WPS",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741NDV4_GPIO_BTN_WPS,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_wr741ndv4_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_setup_ar933x_phy4_switch(true, true);
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio),
+ tl_wr741ndv4_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
+ tl_wr741ndv4_gpio_keys);
+
+ ath79_register_m25p80(&tl_wr741ndv4_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
+ "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c
new file mode 100644
index 000000000..5931654bb
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c
@@ -0,0 +1,130 @@
+/*
+ * TP-LINK TL-WR741ND board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define TL_WR741ND_GPIO_LED_QSS 0
+#define TL_WR741ND_GPIO_LED_SYSTEM 1
+#define TL_WR741ND_GPIO_LED_LAN1 13
+#define TL_WR741ND_GPIO_LED_LAN2 14
+#define TL_WR741ND_GPIO_LED_LAN3 15
+#define TL_WR741ND_GPIO_LED_LAN4 16
+#define TL_WR741ND_GPIO_LED_WAN 17
+
+#define TL_WR741ND_GPIO_BTN_RESET 11
+#define TL_WR741ND_GPIO_BTN_QSS 12
+
+#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr741nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr741nd_flash_data = {
+ .part_probes = tl_wr741nd_part_probes,
+};
+
+static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR741ND_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR741ND_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR741ND_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR741ND_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR741ND_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR741ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR741ND_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wr741nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr741nd_flash_data);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
+ tl_wr741nd_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr741nd_gpio_keys),
+ tl_wr741nd_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap91_pci_init(ee, mac);
+}
+MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
+ tl_wr741nd_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
new file mode 100644
index 000000000..db4d1052a
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
@@ -0,0 +1,159 @@
+/*
+ * TP-LINK TL-WR841N/ND v8 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR841NV8_GPIO_LED_WLAN 13
+#define TL_WR841NV8_GPIO_LED_QSS 15
+#define TL_WR841NV8_GPIO_LED_WAN 18
+#define TL_WR841NV8_GPIO_LED_LAN1 19
+#define TL_WR841NV8_GPIO_LED_LAN2 20
+#define TL_WR841NV8_GPIO_LED_LAN3 21
+#define TL_WR841NV8_GPIO_LED_LAN4 12
+#define TL_WR841NV8_GPIO_LED_SYSTEM 14
+
+#define TL_WR841NV8_GPIO_BTN_RESET 17
+#define TL_WR841NV8_GPIO_SW_RFKILL 16
+
+#define TL_WR841NV8_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV8_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr841n_v8_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr841n_v8_flash_data = {
+ .part_probes = tl_wr841n_v8_part_probes,
+};
+
+static struct gpio_led tl_wr841n_v8_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR841NV8_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR841NV8_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR841NV8_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR841NV8_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR841NV8_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR841NV8_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR841NV8_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR841NV8_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr841n_v8_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841NV8_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL switch",
+ .type = EV_SW,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841NV8_GPIO_SW_RFKILL,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_wr841n_v8_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
+
+ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
+
+ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
+ AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE |
+ AR934X_ETH_CFG_SW_PHY_SWAP);
+
+ t |= AR934X_ETH_CFG_SW_PHY_SWAP;
+ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
+ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static void __init tl_wr841n_v8_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio),
+ tl_wr841n_v8_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
+ tl_wr841n_v8_gpio_keys);
+
+ ath79_register_m25p80(&tl_wr841n_v8_flash_data);
+
+ tl_wr841n_v8_gmac_setup();
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ /* GMAC0 is connected to the PHY0 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-WR841N/ND v8",
+ tl_wr841n_v8_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c
new file mode 100644
index 000000000..11f853f05
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c
@@ -0,0 +1,140 @@
+/*
+ * TP-LINK TL-WR841N/ND v1 board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-dsa.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2
+#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4
+#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5
+
+#define TL_WR841ND_V1_GPIO_BTN_RESET 3
+#define TL_WR841ND_V1_GPIO_BTN_QSS 7
+
+#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition tl_wr841n_v1_partitions[] = {
+ {
+ .name = "redboot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x160000,
+ .size = 0x280000,
+ }, {
+ .name = "config",
+ .offset = 0x3e0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x020000,
+ .size = 0x3c0000,
+ }
+};
+
+static struct flash_platform_data tl_wr841n_v1_flash_data = {
+ .parts = tl_wr841n_v1_partitions,
+ .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions),
+};
+
+static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:red:qss",
+ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN,
+ }
+};
+
+static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841ND_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841ND_V1_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
+ .port_names[0] = "wan",
+ .port_names[1] = "lan1",
+ .port_names[2] = "lan2",
+ .port_names[3] = "lan3",
+ .port_names[4] = "lan4",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
+ .nr_chips = 1,
+ .chip = &tl_wr841n_v1_dsa_chip,
+};
+
+static void __init tl_wr841n_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
+ &tl_wr841n_v1_dsa_data);
+
+ ath79_register_m25p80(&tl_wr841n_v1_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
+ tl_wr841n_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr841n_v1_gpio_keys),
+ tl_wr841n_v1_gpio_keys);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1",
+ tl_wr841n_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c
new file mode 100644
index 000000000..1ddeec730
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c
@@ -0,0 +1,121 @@
+/*
+ * TP-LINK TL-WR941ND board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-dsa.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR941ND_GPIO_LED_SYSTEM 2
+#define TL_WR941ND_GPIO_LED_QSS_RED 4
+#define TL_WR941ND_GPIO_LED_QSS_GREEN 5
+#define TL_WR941ND_GPIO_LED_WLAN 9
+
+#define TL_WR941ND_GPIO_BTN_RESET 3
+#define TL_WR941ND_GPIO_BTN_QSS 7
+
+#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr941nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr941nd_flash_data = {
+ .part_probes = tl_wr941nd_part_probes,
+};
+
+static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR941ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:red:qss",
+ .gpio = TL_WR941ND_GPIO_LED_QSS_RED,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR941ND_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct dsa_chip_data tl_wr941nd_dsa_chip = {
+ .port_names[0] = "wan",
+ .port_names[1] = "lan1",
+ .port_names[2] = "lan2",
+ .port_names[3] = "lan3",
+ .port_names[4] = "lan4",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data tl_wr941nd_dsa_data = {
+ .nr_chips = 1,
+ .chip = &tl_wr941nd_dsa_chip,
+};
+
+static void __init tl_wr941nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
+ &tl_wr941nd_dsa_data);
+
+ ath79_register_m25p80(&tl_wr941nd_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
+ tl_wr941nd_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr941nd_gpio_keys),
+ tl_wr941nd_gpio_keys);
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",
+ tl_wr941nd_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c
new file mode 100644
index 000000000..e49ac23fd
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c
@@ -0,0 +1,205 @@
+/*
+ * Ubiquiti RouterStation support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008 Ubiquiti <support@ubnt.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define UBNT_RS_GPIO_LED_RF 2
+#define UBNT_RS_GPIO_SW4 8
+
+#define UBNT_LS_SR71_GPIO_LED_D25 0
+#define UBNT_LS_SR71_GPIO_LED_D26 1
+#define UBNT_LS_SR71_GPIO_LED_D24 2
+#define UBNT_LS_SR71_GPIO_LED_D23 4
+#define UBNT_LS_SR71_GPIO_LED_D22 5
+#define UBNT_LS_SR71_GPIO_LED_D27 6
+#define UBNT_LS_SR71_GPIO_LED_D28 7
+
+#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */
+#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL)
+
+static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:green:rf",
+ .gpio = UBNT_RS_GPIO_LED_RF,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:green:d22",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D22,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d23",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D23,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d24",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D24,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:red:d25",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D25,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:red:d26",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D26,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d27",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D27,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d28",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D28,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button ubnt_gpio_keys[] __initdata = {
+ {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = UBNT_RS_GPIO_SW4,
+ .active_low = 1,
+ }
+};
+
+static const char *ubnt_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data ubnt_flash_data = {
+ .part_probes = ubnt_part_probes,
+};
+
+static void __init ubnt_generic_setup(void)
+{
+ ath79_register_m25p80(&ubnt_flash_data);
+
+ ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_gpio_keys),
+ ubnt_gpio_keys);
+ ath79_register_pci();
+}
+
+#define UBNT_RS_WAN_PHYMASK BIT(20)
+#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
+
+static void __init ubnt_rs_setup(void)
+{
+ ubnt_generic_setup();
+
+ ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
+
+ /*
+ * There is Secondary MAC address duplicate problem with some
+ * UBNT HW batches. Do not increase Secondary MAC address by 1
+ * but do workaround with 'Locally Administrated' bit.
+ */
+ ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
+ ubnt_rs_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
+ ubnt_rs_setup);
+
+#define UBNT_RSPRO_WAN_PHYMASK BIT(4)
+#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+static void __init ubnt_rspro_setup(void)
+{
+ ubnt_generic_setup();
+
+ ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK |
+ UBNT_RSPRO_LAN_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
+
+ /*
+ * There is Secondary MAC address duplicate problem with some
+ * UBNT HW batches. Do not increase Secondary MAC address by 1
+ * but do workaround with 'Locally Administrated' bit.
+ */
+ ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
+ ubnt_rs_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
+ ubnt_rspro_setup);
+
+static void __init ubnt_lsx_setup(void)
+{
+ ubnt_generic_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
+
+#define UBNT_LSSR71_PHY_MASK BIT(1)
+
+static void __init ubnt_lssr71_setup(void)
+{
+ ubnt_generic_setup();
+
+ ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
+
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
+ ubnt_ls_sr71_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
+ ubnt_lssr71_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c
new file mode 100644
index 000000000..48f49ad0f
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c
@@ -0,0 +1,155 @@
+/*
+ * Buffalo WHR-HP-G300N board support
+ *
+ * based on ...
+ *
+ * TP-LINK TL-WR741ND board support
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define WHRHPG300N_GPIO_LED_SECURITY 0
+#define WHRHPG300N_GPIO_LED_DIAG 1
+#define WHRHPG300N_GPIO_LED_ROUTER 6
+
+#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7
+#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8
+#define WHRHPG300N_GPIO_BTN_RESET 11
+#define WHRHPG300N_GPIO_BTN_AOSS 12
+#define WHRHPG300N_GPIO_LED_LAN1 13
+#define WHRHPG300N_GPIO_LED_LAN2 14
+#define WHRHPG300N_GPIO_LED_LAN3 15
+#define WHRHPG300N_GPIO_LED_LAN4 16
+#define WHRHPG300N_GPIO_LED_WAN 17
+
+#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
+
+#define WHRHPG300N_MAC_OFFSET 0x20c
+
+static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:orange:security",
+ .gpio = WHRHPG300N_GPIO_LED_SECURITY,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:diag",
+ .gpio = WHRHPG300N_GPIO_LED_DIAG,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:router",
+ .gpio = WHRHPG300N_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:wan",
+ .gpio = WHRHPG300N_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan1",
+ .gpio = WHRHPG300N_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan2",
+ .gpio = WHRHPG300N_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan3",
+ .gpio = WHRHPG300N_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan4",
+ .gpio = WHRHPG300N_GPIO_LED_LAN4,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WHRHPG300N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "aoss/wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .gpio = WHRHPG300N_GPIO_BTN_AOSS,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ }, {
+ .desc = "router_on",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ }, {
+ .desc = "router_auto",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ }
+};
+
+static void __init whrhpg300n_setup(void)
+{
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
+ whrhpg300n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(whrhpg300n_gpio_keys),
+ whrhpg300n_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N",
+ whrhpg300n_setup);
+
+MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N",
+ whrhpg300n_setup);
+
+MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN",
+ whrhpg300n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
new file mode 100644
index 000000000..11006fd1b
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
@@ -0,0 +1,114 @@
+/*
+ * Buffalo WLAE-AG300N board support
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WLAEAG300N_MAC_OFFSET 0x20c
+#define WLAEAG300N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led wlaeag300n_leds_gpio[] __initdata = {
+ /*
+ * Note: Writing 1 into GPIO 13 will power down the device.
+ */
+ {
+ .name = "buffalo:green:wireless",
+ .gpio = 14,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:wireless",
+ .gpio = 15,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:status",
+ .gpio = 16,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:status",
+ .gpio = 17,
+ .active_low = 1,
+ }
+};
+
+
+static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = {
+ {
+ .desc = "function",
+ .type = EV_KEY,
+ .code = KEY_MODE,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 0,
+ .active_low = 1,
+ }, {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .desc = "power",
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 11,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 12,
+ .active_low = 1,
+ }
+};
+
+static void __init wlaeag300n_setup(void)
+{
+ u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1);
+
+ ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = BIT(4);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio),
+ wlaeag300n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wlaeag300n_gpio_keys),
+ wlaeag300n_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ap91_pci_init(eeprom1, mac1);
+}
+
+MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N",
+ "Buffalo WLAE-AG300N", wlaeag300n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c
new file mode 100644
index 000000000..fccf1c663
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c
@@ -0,0 +1,172 @@
+/*
+ * Netgear WNDR3700 board support
+ *
+ * Copyright (C) 2009 Marco Porsch
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WNDR3700_GPIO_LED_WPS_ORANGE 0
+#define WNDR3700_GPIO_LED_POWER_ORANGE 1
+#define WNDR3700_GPIO_LED_POWER_GREEN 2
+#define WNDR3700_GPIO_LED_WPS_GREEN 4
+#define WNDR3700_GPIO_LED_WAN_GREEN 6
+
+#define WNDR3700_GPIO_BTN_WPS 3
+#define WNDR3700_GPIO_BTN_RESET 8
+#define WNDR3700_GPIO_BTN_WIFI 11
+
+#define WNDR3700_GPIO_RTL8366_SDA 5
+#define WNDR3700_GPIO_RTL8366_SCK 7
+
+#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL)
+
+#define WNDR3700_ETH0_MAC_OFFSET 0
+#define WNDR3700_ETH1_MAC_OFFSET 0x6
+
+#define WNDR3700_WMAC0_MAC_OFFSET 0
+#define WNDR3700_WMAC1_MAC_OFFSET 0xc
+#define WNDR3700_CALDATA0_OFFSET 0x1000
+#define WNDR3700_CALDATA1_OFFSET 0x5000
+
+static struct gpio_led wndr3700_leds_gpio[] __initdata = {
+ {
+ .name = "wndr3700:green:power",
+ .gpio = WNDR3700_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "wndr3700:orange:power",
+ .gpio = WNDR3700_GPIO_LED_POWER_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "wndr3700:green:wps",
+ .gpio = WNDR3700_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "wndr3700:orange:wps",
+ .gpio = WNDR3700_GPIO_LED_WPS_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "wndr3700:green:wan",
+ .gpio = WNDR3700_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR3700_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR3700_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "wifi",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR3700_GPIO_BTN_WIFI,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_platform_data wndr3700_rtl8366s_data = {
+ .gpio_sda = WNDR3700_GPIO_RTL8366_SDA,
+ .gpio_sck = WNDR3700_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wndr3700_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wndr3700_rtl8366s_data,
+ }
+};
+
+static void __init wndr3700_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ /*
+ * The eth0 and wmac0 interfaces share the same MAC address which
+ * can lead to problems if operated unbridged. Set the locally
+ * administered bit on the eth0 MAC to make it unique.
+ */
+ ath79_init_local_mac(ath79_eth0_data.mac_addr,
+ art + WNDR3700_ETH0_MAC_OFFSET);
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+ ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ art + WNDR3700_ETH1_MAC_OFFSET, 0);
+ ath79_eth1_pll_data.pll_1000 = 0x11110000;
+ ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
+ wndr3700_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wndr3700_gpio_keys),
+ wndr3700_gpio_keys);
+
+ platform_device_register(&wndr3700_rtl8366s_device);
+ platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */
+ ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6));
+
+ /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */
+ ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6));
+
+ ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
+ art + WNDR3700_WMAC0_MAC_OFFSET,
+ art + WNDR3700_CALDATA1_OFFSET,
+ art + WNDR3700_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700",
+ "NETGEAR WNDR3700/WNDR3800/WNDRMAC",
+ wndr3700_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c
new file mode 100644
index 000000000..bd86db386
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c
@@ -0,0 +1,145 @@
+/*
+ * NETGEAR WNR2000 board support
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WNR2000_GPIO_LED_PWR_GREEN 14
+#define WNR2000_GPIO_LED_PWR_AMBER 7
+#define WNR2000_GPIO_LED_WPS 4
+#define WNR2000_GPIO_LED_WLAN 6
+#define WNR2000_GPIO_BTN_RESET 21
+#define WNR2000_GPIO_BTN_WPS 8
+
+#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wnr2000_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x050000,
+ .size = 0x240000,
+ }, {
+ .name = "user-config",
+ .offset = 0x290000,
+ .size = 0x010000,
+ }, {
+ .name = "uImage",
+ .offset = 0x2a0000,
+ .size = 0x120000,
+ }, {
+ .name = "language_table",
+ .offset = 0x3c0000,
+ .size = 0x020000,
+ }, {
+ .name = "rootfs_checksum",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data wnr2000_flash_data = {
+ .parts = wnr2000_partitions,
+ .nr_parts = ARRAY_SIZE(wnr2000_partitions),
+};
+
+static struct gpio_led wnr2000_leds_gpio[] __initdata = {
+ {
+ .name = "wnr2000:green:power",
+ .gpio = WNR2000_GPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "wnr2000:amber:power",
+ .gpio = WNR2000_GPIO_LED_PWR_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "wnr2000:green:wps",
+ .gpio = WNR2000_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "wnr2000:blue:wlan",
+ .gpio = WNR2000_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNR2000_GPIO_BTN_RESET,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNR2000_GPIO_BTN_WPS,
+ }
+};
+
+static void __init wnr2000_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&wnr2000_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
+ wnr2000_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wnr2000_gpio_keys),
+ wnr2000_gpio_keys);
+
+ ath79_register_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c
new file mode 100644
index 000000000..148cd7c7f
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c
@@ -0,0 +1,107 @@
+/*
+ * Compex WP543/WPJ543 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define WP543_GPIO_SW6 2
+#define WP543_GPIO_LED_1 3
+#define WP543_GPIO_LED_2 4
+#define WP543_GPIO_LED_WLAN 5
+#define WP543_GPIO_LED_CONN 6
+#define WP543_GPIO_LED_DIAG 7
+#define WP543_GPIO_SW4 8
+
+#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wp543_leds_gpio[] __initdata = {
+ {
+ .name = "wp543:green:led1",
+ .gpio = WP543_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:led2",
+ .gpio = WP543_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:wlan",
+ .gpio = WP543_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:conn",
+ .gpio = WP543_GPIO_LED_CONN,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:diag",
+ .gpio = WP543_GPIO_LED_DIAG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wp543_gpio_keys[] __initdata = {
+ {
+ .desc = "sw6",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WP543_GPIO_SW6,
+ }, {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WP543_GPIO_SW4,
+ }
+};
+
+static const char *wp543_part_probes[] = {
+ "MyLoader",
+ NULL,
+};
+
+static struct flash_platform_data wp543_flash_data = {
+ .part_probes = wp543_part_probes,
+};
+
+static void __init wp543_setup(void)
+{
+ ath79_register_m25p80(&wp543_flash_data);
+
+ ath79_register_mdio(0, 0xfffffff0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = 0x0f;
+ ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
+ AR71XX_RESET_GE0_PHY;
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+ ath79_register_pci();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
+ wp543_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wp543_gpio_keys),
+ wp543_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c
new file mode 100644
index 000000000..114d6233c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c
@@ -0,0 +1,96 @@
+/*
+ * Compex WPE72 board support
+ *
+ * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include<asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define WPE72_GPIO_RESET 12
+#define WPE72_GPIO_LED_DIAG 13
+#define WPE72_GPIO_LED_1 14
+#define WPE72_GPIO_LED_2 15
+#define WPE72_GPIO_LED_3 16
+#define WPE72_GPIO_LED_4 17
+
+#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wpe72_leds_gpio[] __initdata = {
+ {
+ .name = "wpe72:green:led1",
+ .gpio = WPE72_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led2",
+ .gpio = WPE72_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led3",
+ .gpio = WPE72_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led4",
+ .gpio = WPE72_GPIO_LED_4,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:diag",
+ .gpio = WPE72_GPIO_LED_DIAG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPE72_GPIO_RESET,
+ }
+};
+
+static const char *wpe72_part_probes[] = {
+ "MyLoader",
+ NULL,
+};
+
+static struct flash_platform_data wpe72_flash_data = {
+ .part_probes = wpe72_part_probes,
+};
+
+static void __init wpe72_setup(void)
+{
+ ath79_register_m25p80(&wpe72_flash_data);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+ ath79_register_pci();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
+ wpe72_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wpe72_gpio_keys),
+ wpe72_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c
new file mode 100644
index 000000000..21aefe00a
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c
@@ -0,0 +1,126 @@
+/*
+ * Linksys WRT160NL board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "nvram.h"
+#include "machtypes.h"
+
+#define WRT160NL_GPIO_LED_POWER 14
+#define WRT160NL_GPIO_LED_WPS_AMBER 9
+#define WRT160NL_GPIO_LED_WPS_BLUE 8
+#define WRT160NL_GPIO_LED_WLAN 6
+
+#define WRT160NL_GPIO_BTN_WPS 7
+#define WRT160NL_GPIO_BTN_RESET 21
+
+#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL)
+
+#define WRT160NL_NVRAM_ADDR 0x1f7e0000
+#define WRT160NL_NVRAM_SIZE 0x10000
+
+static const char *wrt160nl_part_probes[] = {
+ "wrt160nl",
+ NULL,
+};
+
+static struct flash_platform_data wrt160nl_flash_data = {
+ .part_probes = wrt160nl_part_probes,
+};
+
+static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
+ {
+ .name = "wrt160nl:blue:power",
+ .gpio = WRT160NL_GPIO_LED_POWER,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ }, {
+ .name = "wrt160nl:amber:wps",
+ .gpio = WRT160NL_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "wrt160nl:blue:wps",
+ .gpio = WRT160NL_GPIO_LED_WPS_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "wrt160nl:blue:wlan",
+ .gpio = WRT160NL_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WRT160NL_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WRT160NL_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init wrt160nl_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+
+ if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
+ "lan_hwaddr=", mac) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ }
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = 0x01;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&wrt160nl_flash_data);
+
+ ath79_register_usb();
+
+ if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
+ "wl0_hwaddr=", mac) == 0)
+ ath79_register_wmac(eeprom, mac);
+ else
+ ath79_register_wmac(eeprom, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
+ wrt160nl_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wrt160nl_gpio_keys),
+ wrt160nl_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL",
+ wrt160nl_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c
new file mode 100644
index 000000000..6c4c1cb0d
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c
@@ -0,0 +1,161 @@
+/*
+ * Linksys WRT400N board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define WRT400N_GPIO_LED_POWER 1
+#define WRT400N_GPIO_LED_WPS_BLUE 4
+#define WRT400N_GPIO_LED_WPS_AMBER 5
+#define WRT400N_GPIO_LED_WLAN 6
+
+#define WRT400N_GPIO_BTN_RESET 8
+#define WRT400N_GPIO_BTN_WLSEC 3
+
+#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL)
+
+#define WRT400N_MAC_ADDR_OFFSET 0x120c
+#define WRT400N_CALDATA0_OFFSET 0x1000
+#define WRT400N_CALDATA1_OFFSET 0x5000
+
+static struct mtd_partition wrt400n_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "env",
+ .offset = 0x030000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "linux",
+ .offset = 0x040000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x180000,
+ .size = 0x630000,
+ }, {
+ .name = "nvram",
+ .offset = 0x7b0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "factory",
+ .offset = 0x7c0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "language",
+ .offset = 0x7d0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "caldata",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x770000,
+ }
+};
+
+static struct flash_platform_data wrt400n_flash_data = {
+ .parts = wrt400n_partitions,
+ .nr_parts = ARRAY_SIZE(wrt400n_partitions),
+};
+
+static struct gpio_led wrt400n_leds_gpio[] __initdata = {
+ {
+ .name = "wrt400n:blue:wps",
+ .gpio = WRT400N_GPIO_LED_WPS_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "wrt400n:amber:wps",
+ .gpio = WRT400N_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "wrt400n:blue:wlan",
+ .gpio = WRT400N_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "wrt400n:blue:power",
+ .gpio = WRT400N_GPIO_LED_POWER,
+ .active_low = 0,
+ .default_trigger = "default-on",
+ }
+};
+
+static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
+ .gpio = WRT400N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wlsec",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
+ .gpio = WRT400N_GPIO_BTN_WLSEC,
+ .active_low = 1,
+ }
+};
+
+static void __init wrt400n_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac = art + WRT400N_MAC_ADDR_OFFSET;
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&wrt400n_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
+ wrt400n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wrt400n_gpio_keys),
+ wrt400n_gpio_keys);
+
+ ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
+ art + WRT400N_CALDATA1_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c
new file mode 100644
index 000000000..868514c95
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c
@@ -0,0 +1,213 @@
+/*
+ * Buffalo WZR-HP-AG300H board support
+ *
+ * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WZRHPAG300H_MAC_OFFSET 0x20c
+#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wzrhpag300h_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x0050000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x0060000,
+ .size = 0x0100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x0160000,
+ .size = 0x1e90000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1ff0000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f90000,
+ }
+};
+
+static struct flash_platform_data wzrhpag300h_flash_data = {
+ .parts = wzrhpag300h_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions),
+};
+
+static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:diag",
+ .gpio = 1,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led wzrhpag300h_wmac0_leds_gpio[] = {
+ {
+ .name = "buffalo:amber:band2g",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:usb",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:band2g",
+ .gpio = 5,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led wzrhpag300h_wmac1_leds_gpio[] = {
+ {
+ .name = "buffalo:green:band5g",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:router",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:movie_engine",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:amber:band5g",
+ .gpio = 5,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 11,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 3,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 5,
+ .active_low = 1,
+ }, {
+ .desc = "router_auto",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .desc = "router_off",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 7,
+ .active_low = 1,
+ }, {
+ .desc = "movie_engine",
+ .type = EV_KEY,
+ .code = BTN_7,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 8,
+ .active_low = 1,
+ }
+};
+
+static void __init wzrhpag300h_setup(void)
+{
+ u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
+ u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
+ u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
+ u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
+
+ ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = BIT(4);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_set_usb_power_gpio(2, GPIOF_OUT_INIT_HIGH, "USB power");
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
+ wzrhpag300h_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpag300h_gpio_keys),
+ wzrhpag300h_gpio_keys);
+
+ ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
+
+ ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap9x_pci_setup_wmac_leds(0, wzrhpag300h_wmac0_leds_gpio,
+ ARRAY_SIZE(wzrhpag300h_wmac0_leds_gpio));
+ ap9x_pci_setup_wmac_leds(1, wzrhpag300h_wmac1_leds_gpio,
+ ARRAY_SIZE(wzrhpag300h_wmac1_leds_gpio));
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
+ "Buffalo WZR-HP-AG300H", wzrhpag300h_setup);
+
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c
new file mode 100644
index 000000000..94f352ace
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c
@@ -0,0 +1,287 @@
+/*
+ * Buffalo WZR-HP-G300NH board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/nxp_74hc153.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WZRHPG300NH_GPIO_LED_USB 0
+#define WZRHPG300NH_GPIO_LED_DIAG 1
+#define WZRHPG300NH_GPIO_LED_WIRELESS 6
+#define WZRHPG300NH_GPIO_LED_SECURITY 17
+#define WZRHPG300NH_GPIO_LED_ROUTER 18
+
+#define WZRHPG300NH_GPIO_RTL8366_SDA 19
+#define WZRHPG300NH_GPIO_RTL8366_SCK 20
+
+#define WZRHPG300NH_GPIO_74HC153_S0 9
+#define WZRHPG300NH_GPIO_74HC153_S1 11
+#define WZRHPG300NH_GPIO_74HC153_1Y 12
+#define WZRHPG300NH_GPIO_74HC153_2Y 14
+
+#define WZRHPG300NH_GPIO_EXP_BASE 32
+#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0)
+#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1)
+#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2)
+#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3)
+#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5)
+#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6)
+#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7)
+
+#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL)
+
+#define WZRHPG300NH_MAC_OFFSET 0x20c
+
+static struct mtd_partition wzrhpg300nh_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x0060000,
+ .size = 0x0100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x0160000,
+ .size = 0x1e60000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1fc0000,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x1fe0000,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f60000,
+ }
+};
+
+static struct physmap_flash_data wzrhpg300nh_flash_data = {
+ .width = 2,
+ .parts = wzrhpg300nh_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions),
+};
+
+#define WZRHPG300NH_FLASH_BASE 0x1e000000
+#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024)
+
+static struct resource wzrhpg300nh_flash_resources[] = {
+ [0] = {
+ .start = WZRHPG300NH_FLASH_BASE,
+ .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device wzrhpg300nh_flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = wzrhpg300nh_flash_resources,
+ .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources),
+ .dev = {
+ .platform_data = &wzrhpg300nh_flash_data,
+ }
+};
+
+static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:orange:security",
+ .gpio = WZRHPG300NH_GPIO_LED_SECURITY,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:wireless",
+ .gpio = WZRHPG300NH_GPIO_LED_WIRELESS,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:router",
+ .gpio = WZRHPG300NH_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:diag",
+ .gpio = WZRHPG300NH_GPIO_LED_DIAG,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:blue:usb",
+ .gpio = WZRHPG300NH_GPIO_LED_USB,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_AOSS,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_USB,
+ .active_low = 1,
+ }, {
+ .desc = "qos_on",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON,
+ .active_low = 0,
+ }, {
+ .desc = "qos_off",
+ .type = EV_KEY,
+ .code = BTN_4,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF,
+ .active_low = 0,
+ }, {
+ .desc = "router_on",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON,
+ .active_low = 0,
+ }, {
+ .desc = "router_auto",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO,
+ .active_low = 0,
+ }
+};
+
+static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = {
+ .gpio_base = WZRHPG300NH_GPIO_EXP_BASE,
+ .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0,
+ .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1,
+ .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y,
+ .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y,
+};
+
+static struct platform_device wzrhpg300nh_74hc153_device = {
+ .name = NXP_74HC153_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg300nh_74hc153_data,
+ }
+};
+
+static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = {
+ .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA,
+ .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wzrhpg300nh_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg300nh_rtl8366_data,
+ }
+};
+
+static struct platform_device wzrhpg300nh_rtl8366rb_device = {
+ .name = RTL8366RB_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg300nh_rtl8366_data,
+ }
+};
+
+static void __init wzrhpg300nh_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET;
+ bool hasrtl8366rb = false;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB)
+ hasrtl8366rb = true;
+
+ if (hasrtl8366rb) {
+ ath79_eth0_pll_data.pll_1000 = 0x1f000000;
+ ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
+ ath79_eth1_pll_data.pll_1000 = 0x100;
+ ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
+ } else {
+ ath79_eth0_pll_data.pll_1000 = 0x1e000100;
+ ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+ ath79_eth1_pll_data.pll_1000 = 0x1e000100;
+ ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+ }
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+ ath79_register_wmac(eeprom, NULL);
+
+ platform_device_register(&wzrhpg300nh_74hc153_device);
+ platform_device_register(&wzrhpg300nh_flash_device);
+
+ if (hasrtl8366rb)
+ platform_device_register(&wzrhpg300nh_rtl8366rb_device);
+ else
+ platform_device_register(&wzrhpg300nh_rtl8366s_device);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
+ wzrhpg300nh_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpg300nh_gpio_keys),
+ wzrhpg300nh_gpio_keys);
+
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
+ "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c
new file mode 100644
index 000000000..6c850cee5
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c
@@ -0,0 +1,177 @@
+/*
+ * Buffalo WZR-HP-G300NH2 board support
+ *
+ * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WZRHPG300NH2_MAC_OFFSET 0x20c
+#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x0050000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x0060000,
+ .size = 0x0100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x0160000,
+ .size = 0x1e90000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1ff0000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f90000,
+ }
+};
+
+static struct flash_platform_data wzrhpg300nh2_flash_data = {
+ .parts = wzrhpg300nh2_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
+};
+
+static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:diag",
+ .gpio = 16,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
+ {
+ .name = "buffalo:blue:usb",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:orange:security",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:router",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:movie_engine_on",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:movie_engine_off",
+ .gpio = 9,
+ .active_low = 1,
+ },
+};
+
+/* The AOSS button is wmac gpio 12 */
+static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 7,
+ .active_low = 1,
+ }, {
+ .desc = "qos",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 11,
+ .active_low = 0,
+ }, {
+ .desc = "router_on",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 8,
+ .active_low = 0,
+ },
+};
+
+static void __init wzrhpg300nh2_setup(void)
+{
+
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000);
+ u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET;
+ /* There is an eth1 but it is not connected to the switch */
+
+ ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
+ ath79_register_mdio(0, ~(BIT(0)));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ /* gpio13 is usb power. Turn it on. */
+ ath79_set_usb_power_gpio(13, GPIOF_OUT_INIT_HIGH, "USB power");
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
+ wzrhpg300nh2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
+ wzrhpg300nh2_gpio_keys);
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
+ ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
+
+ ap91_pci_init(eeprom, mac0);
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
+ "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c
new file mode 100644
index 000000000..b5292db54
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c
@@ -0,0 +1,169 @@
+/*
+ * Buffalo WZR-HP-G450G board support
+ *
+ * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wzrhpg450h_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0010000,
+ }, {
+ .name = "ART",
+ .offset = 0x0050000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "uImage",
+ .offset = 0x0060000,
+ .size = 0x0100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x0160000,
+ .size = 0x1e80000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1fe0000,
+ .size = 0x0020000,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f80000,
+ }
+};
+
+static struct flash_platform_data wzrhpg450h_flash_data = {
+ .parts = wzrhpg450h_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions),
+};
+
+static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:diag",
+ .gpio = 14,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:orange:security",
+ .gpio = 13,
+ .active_low = 1,
+ },
+};
+
+
+static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = {
+ {
+ .name = "buffalo:blue:movie_engine",
+ .gpio = 13,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:router",
+ .gpio = 14,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 8,
+ .active_low = 1,
+ }, {
+ .desc = "movie_engine",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 7,
+ .active_low = 0,
+ }, {
+ .desc = "router_off",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 12,
+ .active_low = 0,
+ }
+};
+
+
+static void __init wzrhpg450h_init(void)
+{
+ u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
+ u8 *mac = (u8 *) ee + 2;
+
+ ath79_register_m25p80_multi(&wzrhpg450h_flash_data);
+
+ ath79_register_mdio(0, ~BIT(0));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
+ wzrhpg450h_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpg450h_gpio_keys),
+ wzrhpg450h_gpio_keys);
+
+ ath79_register_eth(0);
+
+ ath79_set_usb_power_gpio(16, GPIOF_OUT_INIT_HIGH, "USB power");
+ ath79_register_usb();
+
+ ap91_pci_init(ee, NULL);
+ ap9x_pci_setup_wmac_led_pin(0, 15);
+ ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio,
+ ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H",
+ wzrhpg450h_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
new file mode 100644
index 000000000..3a6fe21ed
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
@@ -0,0 +1,157 @@
+/*
+ * Zcomax ZCN-1523H-2-8/5-16 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "machtypes.h"
+
+#define ZCN_1523H_GPIO_BTN_RESET 0
+#define ZCN_1523H_GPIO_LED_INIT 11
+#define ZCN_1523H_GPIO_LED_LAN1 17
+
+#define ZCN_1523H_2_GPIO_LED_WEAK 13
+#define ZCN_1523H_2_GPIO_LED_MEDIUM 14
+#define ZCN_1523H_2_GPIO_LED_STRONG 15
+
+#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1
+#define ZCN_1523H_5_GPIO_LED_LAN2 13
+#define ZCN_1523H_5_GPIO_LED_WEAK 14
+#define ZCN_1523H_5_GPIO_LED_MEDIUM 15
+#define ZCN_1523H_5_GPIO_LED_STRONG 16
+
+#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL)
+
+static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ZCN_1523H_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:amber:init",
+ .gpio = ZCN_1523H_GPIO_LED_INIT,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:lan1",
+ .gpio = ZCN_1523H_GPIO_LED_LAN1,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:red:weak",
+ .gpio = ZCN_1523H_2_GPIO_LED_WEAK,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:medium",
+ .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:strong",
+ .gpio = ZCN_1523H_2_GPIO_LED_STRONG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:red:weak",
+ .gpio = ZCN_1523H_5_GPIO_LED_WEAK,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:medium",
+ .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:strong",
+ .gpio = ZCN_1523H_5_GPIO_LED_STRONG,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:lan2",
+ .gpio = ZCN_1523H_5_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:unknown",
+ .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN,
+ }
+};
+
+static void __init zcn_1523h_generic_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
+ zcn_1523h_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(zcn_1523h_gpio_keys),
+ zcn_1523h_gpio_keys);
+
+ ap91_pci_init(ee, mac);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN1 port */
+ ath79_register_eth(0);
+}
+
+static void __init zcn_1523h_2_setup(void)
+{
+ zcn_1523h_generic_setup();
+ ap9x_pci_setup_wmac_gpio(0, BIT(9), 0);
+
+ ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
+ zcn_1523h_2_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
+ zcn_1523h_2_setup);
+
+static void __init zcn_1523h_5_setup(void)
+{
+ zcn_1523h_generic_setup();
+ ap9x_pci_setup_wmac_gpio(0, BIT(8), 0);
+
+ ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
+ zcn_1523h_5_leds_gpio);
+
+ /* LAN2 port */
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5",
+ zcn_1523h_5_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
new file mode 100644
index 000000000..43911b8ac
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
@@ -0,0 +1,75 @@
+/*
+ * Atheros AR71xx minimal nvram support
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include "nvram.h"
+
+char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len)
+{
+ unsigned len = strlen(name);
+ char *cur, *last;
+
+ if (buf_len == 0 || len == 0)
+ return NULL;
+
+ if (buf_len < len)
+ return NULL;
+
+ if (len == 1)
+ return memchr(buf, (int) *name, buf_len);
+
+ last = (char *) buf + buf_len - len;
+ for (cur = (char *) buf; cur <= last; cur++)
+ if (cur[0] == name[0] && memcmp(cur, name, len) == 0)
+ return cur + len;
+
+ return NULL;
+}
+
+int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
+ const char *name, char *mac)
+{
+ char *buf;
+ char *mac_str;
+ int ret;
+ int t;
+
+ buf = vmalloc(nvram_len);
+ if (!buf)
+ return -ENOMEM;
+
+ memcpy(buf, nvram, nvram_len);
+ buf[nvram_len - 1] = '\0';
+
+ mac_str = ath79_nvram_find_var(name, buf, nvram_len);
+ if (!mac_str) {
+ ret = -EINVAL;
+ goto free;
+ }
+
+ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
+
+ if (t != 6) {
+ ret = -EINVAL;
+ goto free;
+ }
+
+ ret = 0;
+
+free:
+ vfree(buf);
+ return ret;
+}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/nvram.h b/target/linux/ar71xx/files/arch/mips/ath79/nvram.h
new file mode 100644
index 000000000..75151d4a3
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/nvram.h
@@ -0,0 +1,19 @@
+/*
+ * Atheros AR71xx minimal nvram support
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_NVRAM_H
+#define _ATH79_NVRAM_H
+
+char *ath79_nvram_find_var(const char *name, const char *buf,
+ unsigned buf_len);
+int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
+ const char *name, char *mac);
+
+#endif /* _ATH79_NVRAM_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c b/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c
new file mode 100644
index 000000000..fcca1d2ea
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c
@@ -0,0 +1,123 @@
+/*
+ * Atheros AP94 reference board PCI initialization
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+struct ath9k_fixup {
+ u16 *cal_data;
+ unsigned slot;
+};
+
+static int ath9k_num_fixups;
+static struct ath9k_fixup ath9k_fixups[2];
+
+static void ath9k_pci_fixup(struct pci_dev *dev)
+{
+ void __iomem *mem;
+ u16 *cal_data = NULL;
+ u16 cmd;
+ u32 bar0;
+ u32 val;
+ unsigned i;
+
+ for (i = 0; i < ath9k_num_fixups; i++) {
+ if (ath9k_fixups[i].cal_data == NULL)
+ continue;
+
+ if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
+ continue;
+
+ cal_data = ath9k_fixups[i].cal_data;
+ break;
+ }
+
+ if (cal_data == NULL)
+ return;
+
+ if (*cal_data != 0xa55a) {
+ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
+ return;
+ }
+
+ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
+
+ mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
+ if (!mem) {
+ pr_err("pci %s: ioremap error\n", pci_name(dev));
+ return;
+ }
+
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7161:
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
+ AR71XX_PCI_MEM_BASE);
+ break;
+ case ATH79_SOC_AR7240:
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff);
+ break;
+
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR7242:
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
+ break;
+
+ default:
+ BUG();
+ }
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ /* set pointer to first reg address */
+ cal_data += 3;
+ while (*cal_data != 0xffff) {
+ u32 reg;
+ reg = *cal_data++;
+ val = *cal_data++;
+ val |= (*cal_data++) << 16;
+
+ __raw_writel(val, mem + reg);
+ udelay(100);
+ }
+
+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
+ dev->vendor = val & 0xffff;
+ dev->device = (val >> 16) & 0xffff;
+
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
+ dev->revision = val & 0xff;
+ dev->class = val >> 8; /* upper 3 bytes */
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
+
+ iounmap(mem);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+
+void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data)
+{
+ if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+ return;
+
+ ath9k_fixups[ath9k_num_fixups].slot = slot;
+ ath9k_fixups[ath9k_num_fixups].cal_data = cal_data;
+ ath9k_num_fixups++;
+}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h b/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h
new file mode 100644
index 000000000..5794941f0
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h
@@ -0,0 +1,6 @@
+#ifndef _PCI_ATH9K_FIXUP
+#define _PCI_ATH9K_FIXUP
+
+void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init;
+
+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c
new file mode 100644
index 000000000..3c6f9aaeb
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c
@@ -0,0 +1,100 @@
+/*
+ * RouterBoot helper routines
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/routerboot.h>
+
+#include "routerboot.h"
+
+static u32 get_u32(void *buf)
+{
+ u8 *p = buf;
+
+ return ((u32) p[3] + ((u32) p[2] << 8) + ((u32) p[1] << 16) +
+ ((u32) p[0] << 24));
+}
+
+static u16 get_u16(void *buf)
+{
+ u8 *p = buf;
+
+ return (u16) p[1] + ((u16) p[0] << 8);
+}
+
+__init int
+routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
+ u8 **tag_data, u16 *tag_len)
+{
+ uint32_t magic;
+ int ret;
+
+ if (buflen < 4)
+ return -EINVAL;
+
+ magic = get_u32(buf);
+ switch (magic) {
+ case RB_MAGIC_HARD:
+ /* skip magic value */
+ buf += 4;
+ buflen -= 4;
+ break;
+
+ case RB_MAGIC_SOFT:
+ if (buflen < 8)
+ return -EINVAL;
+
+ /* skip magic and CRC value */
+ buf += 8;
+ buflen -= 8;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ ret = -ENOENT;
+ while (buflen > 2) {
+ u16 id;
+ u16 len;
+
+ len = get_u16(buf);
+ buf += 2;
+ buflen -= 2;
+
+ if (buflen < 2)
+ break;
+
+ id = get_u16(buf);
+ buf += 2;
+ buflen -= 2;
+
+ if (id == RB_ID_TERMINATOR)
+ break;
+
+ if (buflen < len)
+ break;
+
+ if (id == tag_id) {
+ if (tag_len)
+ *tag_len = len;
+ if (tag_data)
+ *tag_data = buf;
+ ret = 0;
+ break;
+ }
+
+ buf += len;
+ buflen -= len;
+ }
+
+ return ret;
+}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h
new file mode 100644
index 000000000..9a4dde59e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h
@@ -0,0 +1,26 @@
+/*
+ * RouterBoot definitions
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_ROUTERBOOT_H_
+#define _ATH79_ROUTERBOOT_H_
+
+#ifdef CONFIG_ATH79_ROUTERBOOT
+int routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
+ u8 **tag_data, u16 *tag_len);
+#else
+static inline int
+routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
+ u8 **tag_data, u16 *tag_len)
+{
+ return -ENOENT;
+}
+#endif
+
+#endif /* _ATH79_ROUTERBOOT_H_ */
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h b/target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h
new file mode 100644
index 000000000..8a99d566d
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h
@@ -0,0 +1,34 @@
+/*
+ * Compex's MyLoader specific definitions
+ *
+ * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_MIPS_FW_MYLOADER_H
+#define _ASM_MIPS_FW_MYLOADER_H
+
+#include <linux/myloader.h>
+
+struct myloader_info {
+ uint32_t vid;
+ uint32_t did;
+ uint32_t svid;
+ uint32_t sdid;
+ uint8_t macs[MYLO_ETHADDR_COUNT][6];
+};
+
+#ifdef CONFIG_MYLOADER
+extern struct myloader_info *myloader_get_info(void) __init;
+#else
+static inline struct myloader_info *myloader_get_info(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_MYLOADER */
+
+#endif /* _ASM_MIPS_FW_MYLOADER_H */
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
new file mode 100644
index 000000000..656a6ef86
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
@@ -0,0 +1,60 @@
+/*
+ * Atheros AR71xx SoC specific platform data definitions
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ATH79_PLATFORM_H
+#define __ASM_MACH_ATH79_PLATFORM_H
+
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/phy.h>
+#include <linux/spi/spi.h>
+
+struct ag71xx_switch_platform_data {
+ u8 phy4_mii_en:1;
+ u8 phy_poll_mask;
+};
+
+struct ag71xx_platform_data {
+ phy_interface_t phy_if_mode;
+ u32 phy_mask;
+ int speed;
+ int duplex;
+ u32 reset_bit;
+ u8 mac_addr[ETH_ALEN];
+ struct device *mii_bus_dev;
+
+ u8 has_gbit:1;
+ u8 is_ar91xx:1;
+ u8 is_ar7240:1;
+ u8 is_ar724x:1;
+ u8 has_ar8216:1;
+
+ struct ag71xx_switch_platform_data *switch_data;
+
+ void (*ddr_flush)(void);
+ void (*set_speed)(int speed);
+
+ u32 fifo_cfg1;
+ u32 fifo_cfg2;
+ u32 fifo_cfg3;
+};
+
+struct ag71xx_mdio_platform_data {
+ u32 phy_mask;
+ u8 builtin_switch:1;
+ u8 is_ar7240:1;
+ u8 is_ar9330:1;
+ u8 is_ar934x:1;
+ unsigned long mdio_clock;
+ unsigned long ref_clock;
+};
+
+#endif /* __ASM_MACH_ATH79_PLATFORM_H */
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h
new file mode 100644
index 000000000..50d5a2097
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h
@@ -0,0 +1,84 @@
+/*
+ * MikroTik RouterBOARD 750 definitions
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#ifndef _MACH_RB750_H
+#define _MACH_RB750_H
+
+#include <linux/bitops.h>
+
+#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */
+#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */
+#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */
+#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */
+#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */
+#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */
+#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */
+#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */
+#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */
+#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */
+#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */
+#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */
+#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */
+#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */
+#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */
+
+#define RB750_GPIO_BTN_RESET 1
+#define RB750_GPIO_SPI_CS0 2
+#define RB750_GPIO_LED_ACT 12
+#define RB750_GPIO_LED_PORT1 13
+#define RB750_GPIO_LED_PORT2 14
+#define RB750_GPIO_LED_PORT3 15
+#define RB750_GPIO_LED_PORT4 16
+#define RB750_GPIO_LED_PORT5 17
+
+#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT)
+#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1)
+#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2)
+#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3)
+#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4)
+#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5)
+#define RB750_NAND_NCE BIT(RB750_GPIO_NAND_NCE)
+
+#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE)
+
+#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
+ RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
+
+#define RB7XX_GPIO_NAND_NCE 0
+#define RB7XX_GPIO_MON 9
+#define RB7XX_GPIO_LED_ACT 11
+#define RB7XX_GPIO_USB_POWERON 13
+
+#define RB7XX_NAND_NCE BIT(RB7XX_GPIO_NAND_NCE)
+#define RB7XX_LED_ACT BIT(RB7XX_GPIO_LED_ACT)
+#define RB7XX_MONITOR BIT(RB7XX_GPIO_MON)
+#define RB7XX_USB_POWERON BIT(RB7XX_GPIO_USB_POWERON)
+
+struct rb750_led_data {
+ char *name;
+ char *default_trigger;
+ u32 mask;
+ int active_low;
+};
+
+struct rb750_led_platform_data {
+ int num_leds;
+ struct rb750_led_data *leds;
+ void (*latch_change)(u32 clear, u32 set);
+};
+
+struct rb7xx_nand_platform_data {
+ u32 nce_line;
+
+ void (*enable_pins)(void);
+ void (*disable_pins)(void);
+ void (*latch_change)(u32, u32);
+};
+
+#endif /* _MACH_RB750_H */ \ No newline at end of file
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
new file mode 100644
index 000000000..5b17e94b6
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
@@ -0,0 +1,48 @@
+/*
+ * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was based on the patches for Linux 2.6.27.39 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define CPLD_GPIO_nLED1 0
+#define CPLD_GPIO_nLED2 1
+#define CPLD_GPIO_nLED3 2
+#define CPLD_GPIO_nLED4 3
+#define CPLD_GPIO_FAN 4
+#define CPLD_GPIO_ALE 5
+#define CPLD_GPIO_CLE 6
+#define CPLD_GPIO_nCE 7
+#define CPLD_GPIO_nLED5 8
+
+#define CPLD_NUM_GPIOS 9
+
+#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1)
+#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2)
+#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3)
+#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4)
+#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN)
+#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE)
+#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE)
+#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE)
+#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5)
+
+struct rb4xx_cpld_platform_data {
+ unsigned gpio_base;
+};
+
+extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
+extern int rb4xx_cpld_read(unsigned char *rx_buf,
+ const unsigned char *verify_buf,
+ unsigned cnt);
+extern int rb4xx_cpld_read_from(unsigned addr,
+ unsigned char *rx_buf,
+ const unsigned char *verify_buf,
+ unsigned cnt);
+extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);