diff options
Diffstat (limited to 'target/linux/ar7/base-files')
| -rw-r--r-- | target/linux/ar7/base-files/etc/config/network | 42 | ||||
| -rw-r--r-- | target/linux/ar7/base-files/etc/diag.sh | 34 | ||||
| -rwxr-xr-x | target/linux/ar7/base-files/etc/init.d/adam2 | 13 | ||||
| -rw-r--r-- | target/linux/ar7/base-files/etc/uci-defaults/network | 30 |
4 files changed, 119 insertions, 0 deletions
diff --git a/target/linux/ar7/base-files/etc/config/network b/target/linux/ar7/base-files/etc/config/network new file mode 100644 index 000000000..9ba0e6d29 --- /dev/null +++ b/target/linux/ar7/base-files/etc/config/network @@ -0,0 +1,42 @@ +# Copyright (C) 2006 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option type bridge + option ifname "eth0 eth1" + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + option nat 1 + +## Example for ATM bridging. +## Useful for PPPoE or IP over ATM. Will create 'nas${unit}' +# +# config atm-bridge +# option unit 0 +# option encaps llc +# option vpi 8 +# option vci 35 +# option payload bridged # some ISPs need this set to 'routed' + + +# config interface wan +## PPPoE: +# option ifname nas0 +# option proto pppoe + +## PPPoA: +# option ifname atm0 +# option proto pppoa +# option encaps llc +# option vpi 8 +# option vci 35 + +## Both: +# option username "my_username" +# option password "my_password" diff --git a/target/linux/ar7/base-files/etc/diag.sh b/target/linux/ar7/base-files/etc/diag.sh new file mode 100644 index 000000000..b8e4dc874 --- /dev/null +++ b/target/linux/ar7/base-files/etc/diag.sh @@ -0,0 +1,34 @@ +#!/bin/sh +# Copyright (C) 2007 OpenWrt.org + +# This setup gives us 4.5 distinguishable states: +# +# Solid OFF: Bootloader running, or kernel hung (timer task stalled) +# Solid ON: Kernel hung (timer task stalled) +# 5Hz blink: preinit +# 10Hz blink: failsafe +# Heartbeat: normal operation + +set_state() { + case "$1" in + preinit) + [ -d /sys/class/leds/status ] && { + echo timer >/sys/class/leds/status/trigger + echo 100 >/sys/class/leds/status/delay_on + echo 100 >/sys/class/leds/status/delay_off + } + ;; + failsafe) + [ -d /sys/class/leds/status ] && { + echo timer >/sys/class/leds/status/trigger + echo 50 >/sys/class/leds/status/delay_on + echo 50 >/sys/class/leds/status/delay_off + } + ;; + done) + [ -d /sys/class/leds/status ] && { + echo heartbeat >/sys/class/leds/status/trigger + } + ;; + esac +} diff --git a/target/linux/ar7/base-files/etc/init.d/adam2 b/target/linux/ar7/base-files/etc/init.d/adam2 new file mode 100755 index 000000000..6b786270e --- /dev/null +++ b/target/linux/ar7/base-files/etc/init.d/adam2 @@ -0,0 +1,13 @@ +#!/bin/sh /etc/rc.common +# ADAM2 patcher for Netgear DG834 and compatible +# Copyright (C) 2006 OpenWrt.org + +START=00 +start() { + MD5="$(md5sum /dev/mtdblock0 | awk '{print $1}')" + [ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && { + mtd unlock adam2 + /sbin/adam2patcher /dev/mtdblock0 + } + rm -f /etc/rc.d/S${START}adam2 /etc/init.d/adam2 /sbin/adam2patcher >&- 2>&- +} diff --git a/target/linux/ar7/base-files/etc/uci-defaults/network b/target/linux/ar7/base-files/etc/uci-defaults/network new file mode 100644 index 000000000..2d35c56b1 --- /dev/null +++ b/target/linux/ar7/base-files/etc/uci-defaults/network @@ -0,0 +1,30 @@ +#!/bin/sh +if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175A/1:00" -o \ + -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/1:00" ] && \ + [ -x /sbin/swconfig ]; +then + uci batch <<EOF +set network.eth0=switch +set network.eth0.name=eth0 +set network.eth0.reset=1 +set network.eth0.enable_vlan=1 +set network.eth0_1=switch_vlan +set network.eth0_1.device=eth0 +set network.eth0_1.vlan=1 +set network.eth0_1.ports="0 1 2 3 4t" +commit network +EOF + HAS_SWITCH=1 +fi + +if [ -n "$HAS_SWITCH" -o \ + -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/1:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/1:10" ]; then + uci batch <<EOF +set network.lan.ifname=eth0.1 +commit network +EOF + HAS_SWITCH=1 +fi + +uci commit network |