3 files changed, 115 insertions, 0 deletions
diff --git a/target/linux/adm5120/base-files/etc/config/network b/target/linux/adm5120/base-files/etc/config/network
new file mode 100644
index 000000000..df2f20105
--- /dev/null
+++ b/target/linux/adm5120/base-files/etc/config/network
@@ -0,0 +1,27 @@
+#### VLAN configuration 
+config switch
+	option eth0	"0 1 2 3"
+	option eth1	"4"
+
+
+#### Loopback configuration
+config interface loopback
+	option ifname	"lo"
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+
+#### LAN configuration
+config interface lan
+	option type 	bridge
+	option ifname	"eth0"
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+
+#### WAN configuration
+config interface	wan
+	option ifname	"eth1"
+	option proto	dhcp
diff --git a/target/linux/adm5120/base-files/etc/config/system b/target/linux/adm5120/base-files/etc/config/system
new file mode 100644
index 000000000..ea54ca1dc
--- /dev/null
+++ b/target/linux/adm5120/base-files/etc/config/system
@@ -0,0 +1,40 @@
+config system
+	option hostname	OpenWrt
+	option timezone	UTC
+
+config timeserver ntp
+	list server	0.openwrt.pool.ntp.org
+	list server	1.openwrt.pool.ntp.org
+	list server	2.openwrt.pool.ntp.org
+	list server	3.openwrt.pool.ntp.org
+
+config led
+	option sysfs		lan1
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		lan2
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		lan3
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		lan4
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		wan
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		wlan
+	option trigger		netdev
+	option dev		wlan0
+
diff --git a/target/linux/adm5120/base-files/etc/diag.sh b/target/linux/adm5120/base-files/etc/diag.sh
new file mode 100755
index 000000000..3a66dfc87
--- /dev/null
+++ b/target/linux/adm5120/base-files/etc/diag.sh
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+#
+
+. /lib/adm5120.sh
+
+led_set_attr() {
+	[ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
+}
+
+status_led_set_timer() {
+	led_set_attr $status_led "trigger" "timer"
+	led_set_attr $status_led "delay_on" "$1"
+	led_set_attr $status_led "delay_off" "$2"
+}
+
+status_led_set_morse() {
+	led_set_attr $status_led "trigger" "morse"
+	led_set_attr $status_led "delay" "$1"
+	led_set_attr $status_led "message" "$2"
+}
+
+status_led_on() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 255
+}
+
+status_led_off() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 0
+}
+
+set_state() {
+	case "$1" in
+	preinit)
+		insmod leds-gpio
+		status_led_set_timer 200 200
+		;;
+	failsafe)
+		status_led_set_timer 50 50
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}