aboutsummaryrefslogtreecommitdiffstats
path: root/package/iwinfo/src/include
diff options
context:
space:
mode:
Diffstat (limited to 'package/iwinfo/src/include')
-rw-r--r--package/iwinfo/src/include/iwinfo.h190
-rw-r--r--package/iwinfo/src/include/iwinfo/api/broadcom.h131
-rw-r--r--package/iwinfo/src/include/iwinfo/api/madwifi.h160
-rw-r--r--package/iwinfo/src/include/iwinfo/api/nl80211.h2834
-rw-r--r--package/iwinfo/src/include/iwinfo/api/wext.h1139
-rw-r--r--package/iwinfo/src/include/iwinfo/lua.h80
-rw-r--r--package/iwinfo/src/include/iwinfo/madwifi.h83
-rw-r--r--package/iwinfo/src/include/iwinfo/nl80211.h125
-rw-r--r--package/iwinfo/src/include/iwinfo/utils.h47
-rw-r--r--package/iwinfo/src/include/iwinfo/wext.h84
-rw-r--r--package/iwinfo/src/include/iwinfo/wext_scan.h380
-rw-r--r--package/iwinfo/src/include/iwinfo/wl.h84
12 files changed, 5337 insertions, 0 deletions
diff --git a/package/iwinfo/src/include/iwinfo.h b/package/iwinfo/src/include/iwinfo.h
new file mode 100644
index 000000000..868c10b35
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo.h
@@ -0,0 +1,190 @@
+#ifndef __IWINFO_H_
+#define __IWINFO_H_
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <glob.h>
+#include <ctype.h>
+#include <dirent.h>
+#include <stdint.h>
+
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <net/if.h>
+#include <errno.h>
+
+
+#define IWINFO_BUFSIZE 24 * 1024
+#define IWINFO_ESSID_MAX_SIZE 32
+
+#define IWINFO_80211_A (1 << 0)
+#define IWINFO_80211_B (1 << 1)
+#define IWINFO_80211_G (1 << 2)
+#define IWINFO_80211_N (1 << 3)
+
+#define IWINFO_CIPHER_NONE (1 << 0)
+#define IWINFO_CIPHER_WEP40 (1 << 1)
+#define IWINFO_CIPHER_TKIP (1 << 2)
+#define IWINFO_CIPHER_WRAP (1 << 3)
+#define IWINFO_CIPHER_CCMP (1 << 4)
+#define IWINFO_CIPHER_WEP104 (1 << 5)
+#define IWINFO_CIPHER_AESOCB (1 << 6)
+#define IWINFO_CIPHER_CKIP (1 << 7)
+
+#define IWINFO_KMGMT_NONE (1 << 0)
+#define IWINFO_KMGMT_8021x (1 << 1)
+#define IWINFO_KMGMT_PSK (1 << 2)
+
+#define IWINFO_AUTH_OPEN (1 << 0)
+#define IWINFO_AUTH_SHARED (1 << 1)
+
+extern const char *IWINFO_CIPHER_NAMES[];
+extern const char *IWINFO_KMGMT_NAMES[];
+extern const char *IWINFO_AUTH_NAMES[];
+
+
+enum iwinfo_opmode {
+ IWINFO_OPMODE_UNKNOWN = 0,
+ IWINFO_OPMODE_MASTER = 1,
+ IWINFO_OPMODE_ADHOC = 2,
+ IWINFO_OPMODE_CLIENT = 3,
+ IWINFO_OPMODE_MONITOR = 4,
+};
+
+extern const char *IWINFO_OPMODE_NAMES[];
+
+
+struct iwinfo_rate_entry {
+ uint32_t rate;
+ int8_t mcs;
+ uint8_t is_40mhz:1;
+ uint8_t is_short_gi:1;
+};
+
+struct iwinfo_assoclist_entry {
+ uint8_t mac[6];
+ int8_t signal;
+ int8_t noise;
+ uint32_t inactive;
+ uint32_t rx_packets;
+ uint32_t tx_packets;
+ struct iwinfo_rate_entry rx_rate;
+ struct iwinfo_rate_entry tx_rate;
+};
+
+struct iwinfo_txpwrlist_entry {
+ uint8_t dbm;
+ uint16_t mw;
+};
+
+struct iwinfo_freqlist_entry {
+ uint8_t channel;
+ uint32_t mhz;
+ uint8_t restricted;
+};
+
+struct iwinfo_crypto_entry {
+ uint8_t enabled;
+ uint8_t wpa_version;
+ uint8_t group_ciphers;
+ uint8_t pair_ciphers;
+ uint8_t auth_suites;
+ uint8_t auth_algs;
+};
+
+struct iwinfo_scanlist_entry {
+ uint8_t mac[6];
+ uint8_t ssid[IWINFO_ESSID_MAX_SIZE+1];
+ enum iwinfo_opmode mode;
+ uint8_t channel;
+ uint8_t signal;
+ uint8_t quality;
+ uint8_t quality_max;
+ struct iwinfo_crypto_entry crypto;
+};
+
+struct iwinfo_country_entry {
+ uint16_t iso3166;
+ uint8_t ccode[4];
+};
+
+struct iwinfo_iso3166_label {
+ uint16_t iso3166;
+ uint8_t name[28];
+};
+
+struct iwinfo_hardware_id {
+ uint16_t vendor_id;
+ uint16_t device_id;
+ uint16_t subsystem_vendor_id;
+ uint16_t subsystem_device_id;
+};
+
+struct iwinfo_hardware_entry {
+ const char *vendor_name;
+ const char *device_name;
+ uint16_t vendor_id;
+ uint16_t device_id;
+ uint16_t subsystem_vendor_id;
+ uint16_t subsystem_device_id;
+ int16_t txpower_offset;
+ int16_t frequency_offset;
+};
+
+extern const struct iwinfo_iso3166_label IWINFO_ISO3166_NAMES[];
+extern const struct iwinfo_hardware_entry IWINFO_HARDWARE_ENTRIES[];
+
+
+struct iwinfo_ops {
+ int (*mode)(const char *, int *);
+ int (*channel)(const char *, int *);
+ int (*frequency)(const char *, int *);
+ int (*frequency_offset)(const char *, int *);
+ int (*txpower)(const char *, int *);
+ int (*txpower_offset)(const char *, int *);
+ int (*bitrate)(const char *, int *);
+ int (*signal)(const char *, int *);
+ int (*noise)(const char *, int *);
+ int (*quality)(const char *, int *);
+ int (*quality_max)(const char *, int *);
+ int (*mbssid_support)(const char *, int *);
+ int (*hwmodelist)(const char *, int *);
+ int (*ssid)(const char *, char *);
+ int (*bssid)(const char *, char *);
+ int (*country)(const char *, char *);
+ int (*hardware_id)(const char *, char *);
+ int (*hardware_name)(const char *, char *);
+ int (*encryption)(const char *, char *);
+ int (*assoclist)(const char *, char *, int *);
+ int (*txpwrlist)(const char *, char *, int *);
+ int (*scanlist)(const char *, char *, int *);
+ int (*freqlist)(const char *, char *, int *);
+ int (*countrylist)(const char *, char *, int *);
+ void (*close)(void);
+};
+
+const char * iwinfo_type(const char *ifname);
+const struct iwinfo_ops * iwinfo_backend(const char *ifname);
+void iwinfo_finish(void);
+
+#include "iwinfo/wext.h"
+
+#ifdef USE_WL
+#include "iwinfo/wl.h"
+#endif
+
+#ifdef USE_MADWIFI
+#include "iwinfo/madwifi.h"
+#endif
+
+#ifdef USE_NL80211
+#include "iwinfo/nl80211.h"
+#endif
+
+#endif
diff --git a/package/iwinfo/src/include/iwinfo/api/broadcom.h b/package/iwinfo/src/include/iwinfo/api/broadcom.h
new file mode 100644
index 000000000..50eedd9e4
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/api/broadcom.h
@@ -0,0 +1,131 @@
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ */
+
+#ifndef _BROADCOM_H
+#define _BROADCOM_H
+
+#define WL_MCSSET_LEN 16
+#define WL_MAX_STA_COUNT 32
+
+#define WL_BSS_RSSI_OFFSET 82
+#define WL_BSS_NOISE_OFFSET 84
+
+#define WLC_IOCTL_MAGIC 0x14e46c77
+#define WLC_IOCTL_MAXLEN 8192
+
+#define WLC_CNTRY_BUF_SZ 4
+
+#define WLC_GET_MAGIC 0
+#define WLC_GET_RATE 12
+#define WLC_GET_INFRA 19
+#define WLC_GET_AUTH 21
+#define WLC_GET_BSSID 23
+#define WLC_GET_SSID 25
+#define WLC_GET_CHANNEL 29
+#define WLC_GET_PASSIVE 48
+#define WLC_GET_COUNTRY 83
+#define WLC_GET_REVINFO 98
+#define WLC_GET_AP 117
+#define WLC_GET_RSSI 127
+#define WLC_GET_WSEC 133
+#define WLC_GET_PHY_NOISE 135
+#define WLC_GET_BSS_INFO 136
+#define WLC_GET_ASSOCLIST 159
+#define WLC_GET_WPA_AUTH 164
+#define WLC_GET_COUNTRY_LIST 261
+#define WLC_GET_VAR 262
+
+
+struct wl_ether_addr {
+ uint8_t octet[6];
+};
+
+struct wl_maclist {
+ uint count;
+ struct wl_ether_addr ea[1];
+};
+
+typedef struct wl_sta_rssi {
+ int rssi;
+ char mac[6];
+ uint16_t foo;
+} wl_sta_rssi_t;
+
+#define WL_NUMRATES 255 /* max # of rates in a rateset */
+typedef struct wl_rateset {
+ uint32_t count; /* # rates in this set */
+ uint8_t rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
+} wl_rateset_t;
+
+typedef struct wl_sta_info {
+ uint16_t ver; /* version of this struct */
+ uint16_t len; /* length in bytes of this structure */
+ uint16_t cap; /* sta's advertised capabilities */
+ uint32_t flags; /* flags defined below */
+ uint32_t idle; /* time since data pkt rx'd from sta */
+ unsigned char ea[6]; /* Station address */
+ wl_rateset_t rateset; /* rateset in use */
+ uint32_t in; /* seconds elapsed since associated */
+ uint32_t listen_interval_inms; /* Min Listen interval in ms for this STA */
+ uint32_t tx_pkts; /* # of packets transmitted */
+ uint32_t tx_failures; /* # of packets failed */
+ uint32_t rx_ucast_pkts; /* # of unicast packets received */
+ uint32_t rx_mcast_pkts; /* # of multicast packets received */
+ uint32_t tx_rate; /* Rate of last successful tx frame */
+ uint32_t rx_rate; /* Rate of last successful rx frame */
+} wl_sta_info_t;
+
+typedef struct wlc_ssid {
+ uint32_t ssid_len;
+ unsigned char ssid[32];
+} wlc_ssid_t;
+
+/* Linux network driver ioctl encoding */
+typedef struct wl_ioctl {
+ uint32_t cmd; /* common ioctl definition */
+ void *buf; /* pointer to user buffer */
+ uint32_t len; /* length of user buffer */
+ uint8_t set; /* get or set request (optional) */
+ uint32_t used; /* bytes read or written (optional) */
+ uint32_t needed; /* bytes needed (optional) */
+} wl_ioctl_t;
+
+/* Revision info */
+typedef struct wlc_rev_info {
+ uint vendorid; /* PCI vendor id */
+ uint deviceid; /* device id of chip */
+ uint radiorev; /* radio revision */
+ uint chiprev; /* chip revision */
+ uint corerev; /* core revision */
+ uint boardid; /* board identifier (usu. PCI sub-device id) */
+ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */
+ uint boardrev; /* board revision */
+ uint driverrev; /* driver version */
+ uint ucoderev; /* microcode version */
+ uint bus; /* bus type */
+ uint chipnum; /* chip number */
+} wlc_rev_info_t;
+
+typedef struct wl_country_list {
+ uint32_t buflen;
+ uint32_t band_set;
+ uint32_t band;
+ uint32_t count;
+ char country_abbrev[1];
+} wl_country_list_t;
+
+
+#endif
diff --git a/package/iwinfo/src/include/iwinfo/api/madwifi.h b/package/iwinfo/src/include/iwinfo/api/madwifi.h
new file mode 100644
index 000000000..80d32e195
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/api/madwifi.h
@@ -0,0 +1,160 @@
+/*
+ * Header bits derived from MadWifi source:
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Distributed under the terms of the GPLv2 license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MADWIFI_H
+#define _MADWIFI_H
+
+/* ieee80211.h */
+#define IEEE80211_ADDR_LEN 6
+#define IEEE80211_RATE_VAL 0x7f
+#define IEEE80211_SEQ_SEQ_MASK 0xfff0
+#define IEEE80211_SEQ_SEQ_SHIFT 4
+
+
+/* ieee80211_crypto.h */
+#define IEEE80211_KEYBUF_SIZE 16
+#define IEEE80211_MICBUF_SIZE 16
+#define IEEE80211_TID_SIZE 17
+
+#define IEEE80211_CIPHER_WEP 0
+#define IEEE80211_CIPHER_TKIP 1
+#define IEEE80211_CIPHER_AES_OCB 2
+#define IEEE80211_CIPHER_AES_CCM 3
+#define IEEE80211_CIPHER_CKIP 5
+#define IEEE80211_CIPHER_NONE 6
+#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE + 1)
+
+
+/* ieee80211_ioctl.h */
+#define IEEE80211_KEY_DEFAULT 0x80
+#define IEEE80211_CHAN_MAX 255
+#define IEEE80211_CHAN_BYTES 32
+#define IEEE80211_RATE_MAXSIZE 15
+
+#define IEEE80211_IOCTL_GETKEY (SIOCDEVPRIVATE+3)
+#define IEEE80211_IOCTL_STA_STATS (SIOCDEVPRIVATE+5)
+#define IEEE80211_IOCTL_STA_INFO (SIOCDEVPRIVATE+6)
+
+#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1)
+#define IEEE80211_IOCTL_GETMODE (SIOCIWFIRSTPRIV+3)
+#define IEEE80211_IOCTL_GETCHANLIST (SIOCIWFIRSTPRIV+7)
+#define IEEE80211_IOCTL_GETCHANINFO (SIOCIWFIRSTPRIV+13)
+
+#define SIOC80211IFCREATE (SIOCDEVPRIVATE+7)
+#define SIOC80211IFDESTROY (SIOCDEVPRIVATE+8)
+
+#define IEEE80211_CLONE_BSSID 0x0001 /* allocate unique mac/bssid */
+#define IEEE80211_NO_STABEACONS 0x0002 /* Do not setup the station beacon timers */
+
+struct ieee80211_clone_params {
+ char icp_name[IFNAMSIZ]; /* device name */
+ u_int16_t icp_opmode; /* operating mode */
+ u_int16_t icp_flags; /* see below */
+};
+
+enum ieee80211_opmode {
+ IEEE80211_M_STA = 1, /* infrastructure station */
+ IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */
+ IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */
+ IEEE80211_M_HOSTAP = 6, /* Software Access Point */
+ IEEE80211_M_MONITOR = 8, /* Monitor mode */
+ IEEE80211_M_WDS = 2, /* WDS link */
+};
+
+enum {
+ IEEE80211_PARAM_AUTHMODE = 3, /* authentication mode */
+ IEEE80211_PARAM_MCASTCIPHER = 5, /* multicast/default cipher */
+ IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */
+ IEEE80211_PARAM_UCASTCIPHERS = 7, /* unicast cipher suites */
+ IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */
+};
+
+/*
+ * Authentication mode.
+ */
+enum ieee80211_authmode {
+ IEEE80211_AUTH_NONE = 0,
+ IEEE80211_AUTH_OPEN = 1, /* open */
+ IEEE80211_AUTH_SHARED = 2, /* shared-key */
+ IEEE80211_AUTH_8021X = 3, /* 802.1x */
+ IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */
+ /* NB: these are used only for ioctls */
+ IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */
+};
+
+struct ieee80211_channel {
+ u_int16_t ic_freq; /* setting in MHz */
+ u_int16_t ic_flags; /* see below */
+ u_int8_t ic_ieee; /* IEEE channel number */
+ int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */
+ int8_t ic_maxpower; /* maximum tx power in dBm */
+ int8_t ic_minpower; /* minimum tx power in dBm */
+ u_int8_t ic_scanflags;
+ u_int8_t ic_idletime; /* phy idle time in % */
+};
+
+struct ieee80211req_key {
+ u_int8_t ik_type; /* key/cipher type */
+ u_int8_t ik_pad;
+ u_int16_t ik_keyix; /* key index */
+ u_int8_t ik_keylen; /* key length in bytes */
+ u_int8_t ik_flags;
+ u_int8_t ik_macaddr[IEEE80211_ADDR_LEN];
+ u_int64_t ik_keyrsc; /* key receive sequence counter */
+ u_int64_t ik_keytsc; /* key transmit sequence counter */
+ u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
+};
+
+struct ieee80211req_chanlist {
+ u_int8_t ic_channels[IEEE80211_CHAN_BYTES];
+};
+
+struct ieee80211req_chaninfo {
+ u_int ic_nchans;
+ struct ieee80211_channel ic_chans[IEEE80211_CHAN_MAX];
+};
+
+struct ieee80211req_sta_info {
+ u_int16_t isi_len; /* length (mult of 4) */
+ u_int16_t isi_freq; /* MHz */
+ u_int16_t isi_flags; /* channel flags */
+ u_int16_t isi_state; /* state flags */
+ u_int8_t isi_authmode; /* authentication algorithm */
+ u_int8_t isi_rssi;
+ int8_t isi_noise;
+ u_int16_t isi_capinfo; /* capabilities */
+ u_int8_t isi_athflags; /* Atheros capabilities */
+ u_int8_t isi_erp; /* ERP element */
+ u_int8_t isi_macaddr[IEEE80211_ADDR_LEN];
+ u_int8_t isi_nrates; /* negotiated rates */
+ u_int8_t isi_rates[IEEE80211_RATE_MAXSIZE];
+ u_int8_t isi_txrate; /* index to isi_rates[] */
+ u_int16_t isi_ie_len; /* IE length */
+ u_int16_t isi_associd; /* assoc response */
+ u_int16_t isi_txpower; /* current tx power */
+ u_int16_t isi_vlan; /* vlan tag */
+ u_int16_t isi_txseqs[17]; /* seq to be transmitted */
+ u_int16_t isi_rxseqs[17]; /* seq previous for qos frames*/
+ u_int16_t isi_inact; /* inactivity timer */
+ u_int8_t isi_uapsd; /* UAPSD queues */
+ u_int8_t isi_opmode; /* sta operating mode */
+};
+
+#endif
diff --git a/package/iwinfo/src/include/iwinfo/api/nl80211.h b/package/iwinfo/src/include/iwinfo/api/nl80211.h
new file mode 100644
index 000000000..d73dcb8e8
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/api/nl80211.h
@@ -0,0 +1,2834 @@
+#ifndef __LINUX_NL80211_H
+#define __LINUX_NL80211_H
+/*
+ * 802.11 netlink interface public header
+ *
+ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
+ * Copyright 2008 Michael Buesch <m@bues.ch>
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/types.h>
+
+/**
+ * DOC: Station handling
+ *
+ * Stations are added per interface, but a special case exists with VLAN
+ * interfaces. When a station is bound to an AP interface, it may be moved
+ * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
+ * The station is still assumed to belong to the AP interface it was added
+ * to.
+ *
+ * TODO: need more info?
+ */
+
+/**
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+ * management entities such as wpa_supplicant react to management frames
+ * that are not being handled by the kernel. This includes, for example,
+ * certain classes of action frames that cannot be handled in the kernel
+ * for various reasons.
+ *
+ * Frame registration is done on a per-interface basis and registrations
+ * cannot be removed other than by closing the socket. It is possible to
+ * specify a registration filter to register, for example, only for a
+ * certain type of action frame. In particular with action frames, those
+ * that userspace registers for will not be returned as unhandled by the
+ * driver, so that the registered application has to take responsibility
+ * for doing that.
+ *
+ * The type of frame that can be registered for is also dependent on the
+ * driver and interface type. The frame types are advertised in wiphy
+ * attributes so applications know what to expect.
+ *
+ * NOTE: When an interface changes type while registrations are active,
+ * these registrations are ignored until the interface type is
+ * changed again. This means that changing the interface type can
+ * lead to a situation that couldn't otherwise be produced, but
+ * any such registrations will be dormant in the sense that they
+ * will not be serviced, i.e. they will not receive any frames.
+ *
+ * Frame transmission allows userspace to send for example the required
+ * responses to action frames. It is subject to some sanity checking,
+ * but many frames can be transmitted. When a frame was transmitted, its
+ * status is indicated to the sending socket.
+ *
+ * For more technical details, see the corresponding command descriptions
+ * below.
+ */
+
+/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
+/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+ *
+ * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
+ * to get a list of all present wiphys.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
+ * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
+ * instead, the support here is for backward compatibility only.
+ * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
+ * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
+ * %NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
+ * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
+ *
+ * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
+ * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
+ * on an %NL80211_ATTR_IFINDEX is supported.
+ * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
+ * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+ * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
+ * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
+ * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
+ * be sent from userspace to request creation of a new virtual interface,
+ * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
+ * %NL80211_ATTR_IFNAME.
+ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
+ * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
+ * userspace to request deletion of a virtual interface, then requires
+ * attribute %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
+ * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
+ * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
+ * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
+ * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
+ * and %NL80211_ATTR_KEY_SEQ attributes.
+ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
+ * or %NL80211_ATTR_MAC.
+ *
+ * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
+ * %NL80222_CMD_NEW_BEACON message)
+ * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
+ * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
+ * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
+ * Following attributes are provided for drivers that generate full Beacon
+ * and Probe Response frames internally: %NL80211_ATTR_SSID,
+ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+ * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP,
+ * %NL80211_ATTR_IE_ASSOC_RESP.
+ * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
+ * parameters are like for %NL80211_CMD_SET_BEACON.
+ * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
+ *
+ * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
+ * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
+ * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
+ * the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
+ * or, if no MAC address given, all stations, on the interface identified
+ * by %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ * %NL80211_ATTR_MAC.
+ * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+ * the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+ * or, if no MAC address given, all mesh paths, on the interface identified
+ * by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
+ * %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+ * regulatory domain.
+ * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
+ * after being queried by the kernel. CRDA replies by sending a regulatory
+ * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+ * current alpha2 if it found a match. It also provides
+ * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ * regulatory rule is a nested set of attributes given by
+ * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
+ * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ * store this as a valid request and then query userspace for it.
+ *
+ * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
+ * interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
+ * interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
+ * interface is identified with %NL80211_ATTR_IFINDEX and the management
+ * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
+ * added to the end of the specified management frame is specified with
+ * %NL80211_ATTR_IE. If the command succeeds, the requested data will be
+ * added to all specified management frames generated by
+ * kernel/firmware/driver.
+ * Note: This command has been removed and it is only reserved at this
+ * point to avoid re-using existing command number. The functionality this
+ * command was planned for has been provided with cleaner design with the
+ * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
+ * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
+ * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_CMD_GET_SCAN: get scan results
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * probe requests at CCK rate or not.
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
+ * NL80211_CMD_GET_SCAN and on the "scan" multicast group)
+ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
+ * partial scan results may be available
+ *
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ * are passed, they are used in the probe requests. For
+ * broadcast, a broadcast SSID must be passed (ie. an empty
+ * string). If no SSID is passed, no probe requests are sent and
+ * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES,
+ * if passed, define which channels should be scanned; if not
+ * passed, all channels allowed for the current regulatory domain
+ * are used. Extra IEs can also be passed from the userspace by
+ * using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
+ * if scheduled scan is not running.
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ * results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ * stopped. The driver may issue this event at any time during a
+ * scheduled scan. One reason for stopping the scan is if the hardware
+ * does not support starting an association or a normal scan while running
+ * a scheduled scan. This event is also sent when the
+ * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ * is brought down while a scheduled scan was running.
+ *
+ * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ * or noise level
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+ * has been changed and provides details of the request information
+ * that caused the change such as who initiated the regulatory request
+ * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ * to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+ * has been found while world roaming thus enabling active scan or
+ * any mode of operation that initiates TX (beacons) on a channel
+ * where we would not have been able to do either before. As an example
+ * if you are world roaming (regulatory domain set to world or if your
+ * driver is using a custom world roaming regulatory domain) and while
+ * doing a passive scan on the 5 GHz band you find an AP there (if not
+ * on a DFS channel) you will now be able to actively scan for that AP
+ * or use AP mode on your card on that same channel. Note that this will
+ * never be used for channels 1-11 on the 2 GHz band as they are always
+ * enabled world wide. This beacon hint is only sent if your device had
+ * either disabled active scanning or beaconing on a channel. We send to
+ * userspace the wiphy on which we removed a restriction from
+ * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ * the beacon hint was processed.
+ *
+ * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
+ * This command is used both as a command (request to authenticate) and
+ * as an event on the "mlme" multicast group indicating completion of the
+ * authentication process.
+ * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
+ * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
+ * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
+ * the SSID (mainly for association, but is included in authentication
+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
+ * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
+ * is used to specify the authentication type. %NL80211_ATTR_IE is used to
+ * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
+ * to be added to the frame.
+ * When used as an event, this reports reception of an Authentication
+ * frame in station and IBSS modes when the local MLME processed the
+ * frame, i.e., it was for the local STA and was received in correct
+ * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
+ * MLME SAP interface (kernel providing MLME, userspace SME). The
+ * included %NL80211_ATTR_FRAME attribute contains the management frame
+ * (including both the header and frame body, but not FCS). This event is
+ * also used to indicate if the authentication attempt timed out. In that
+ * case the %NL80211_ATTR_FRAME attribute is replaced with a
+ * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
+ * pending authentication timed out).
+ * @NL80211_CMD_ASSOCIATE: association request and notification; like
+ * NL80211_CMD_AUTHENTICATE but for Association and Reassociation
+ * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
+ * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
+ * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
+ * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
+ * primitives).
+ * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
+ * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
+ * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
+ *
+ * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
+ * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
+ * event includes %NL80211_ATTR_MAC to describe the source MAC address of
+ * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
+ * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
+ * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
+ * event matches with MLME-MICHAELMICFAILURE.indication() primitive
+ *
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ * FREQ attribute (for the initial frequency if no peer can be found)
+ * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ * should be fixed rather than automatically determined. Can only be
+ * executed on a network interface that is UP, and fixed BSSID/FREQ
+ * may be rejected. Another optional parameter is the beacon interval,
+ * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
+ * given defaults to 100 TU (102.4ms).
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ * determined by the network interface.
+ *
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
+ * to identify the device, and the TESTDATA blob attribute to pass through
+ * to the driver.
+ *
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ * requests to connect to a specified network but without separating
+ * auth and assoc steps. For this, you need to specify the SSID in a
+ * %NL80211_ATTR_SSID attribute, and can optionally specify the association
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+ * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+ * It is also sent as an event, with the BSSID and response IEs when the
+ * connection is established or failed to be established. This can be
+ * determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ * sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ * userspace that a connection was dropped by the AP or due to other
+ * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ * %NL80211_ATTR_REASON_CODE attributes are used.
+ *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ * associated with this wiphy must be down and will follow.
+ *
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
+ * channel for the specified amount of time. This can be used to do
+ * off-channel operations like transmit a Public Action frame and wait for
+ * a response while being associated to an AP on another channel.
+ * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
+ * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+ * optionally used to specify additional channel parameters.
+ * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+ * to remain on the channel. This command is also used as an event to
+ * notify when the requested duration starts (it may take a while for the
+ * driver to schedule this time due to other concurrent needs for the
+ * radio).
+ * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
+ * that will be included with any events pertaining to this request;
+ * the cookie is also used to cancel the request.
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
+ * pending remain-on-channel duration if the desired operation has been
+ * completed prior to expiration of the originally requested duration.
+ * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
+ * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
+ * uniquely identify the request.
+ * This command is also used as an event to notify when a requested
+ * remain-on-channel duration has expired.
+ *
+ * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
+ * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
+ * and @NL80211_ATTR_TX_RATES the set of allowed rates.
+ *
+ * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
+ * (via @NL80211_CMD_FRAME) for processing in userspace. This command
+ * requires an interface index, a frame type attribute (optional for
+ * backward compatibility reasons, if not given assumes action frames)
+ * and a match attribute containing the first few bytes of the frame
+ * that should match, e.g. a single byte for only a category match or
+ * four bytes for vendor frames including the OUI. The registration
+ * cannot be dropped, but is removed automatically when the netlink
+ * socket is closed. Multiple registrations can be made.
+ * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
+ * backward compatibility
+ * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
+ * command is used both as a request to transmit a management frame and
+ * as an event indicating reception of a frame that was not processed in
+ * kernel code, but is for us (i.e., which may need to be processed in a
+ * user space application). %NL80211_ATTR_FRAME is used to specify the
+ * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
+ * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
+ * which channel the frame is to be transmitted or was received. If this
+ * channel is not the current channel (remain-on-channel or the
+ * operational channel) the device will switch to the given channel and
+ * transmit the frame, optionally waiting for a response for the time
+ * specified using %NL80211_ATTR_DURATION. When called, this operation
+ * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
+ * TX status event pertaining to the TX request.
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * management frames at CCK rate or not in 2GHz band.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ * command may be used with the corresponding cookie to cancel the wait
+ * time if it is known that it is no longer necessary.
+ * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
+ * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
+ * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
+ * the TX command and %NL80211_ATTR_FRAME includes the contents of the
+ * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
+ * the frame.
+ * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
+ * backward compatibility.
+ * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
+ * is used to configure connection quality monitoring notification trigger
+ * levels.
+ * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
+ * command is used as an event to indicate the that a trigger level was
+ * reached.
+ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
+ * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
+ * by %NL80211_ATTR_IFINDEX) shall operate on.
+ * In case multiple channels are supported by the device, the mechanism
+ * with which it switches channels is implementation-defined.
+ * When a monitor interface is given, it can only switch channel while
+ * no other interfaces are operating to avoid disturbing the operation
+ * of any other interfaces, and other interfaces will again take
+ * precedence when they are used.
+ *
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ *
+ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
+ * mesh config parameters may be given.
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
+ * network is determined by the network interface.
+ *
+ * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
+ * notification. This event is used to indicate that an unprotected
+ * deauthentication frame was dropped when MFP is in use.
+ * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
+ * notification. This event is used to indicate that an unprotected
+ * disassociation frame was dropped when MFP is in use.
+ *
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
+ * beacon or probe response from a compatible mesh peer. This is only
+ * sent while no station information (sta_info) exists for the new peer
+ * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On
+ * reception of this notification, userspace may decide to create a new
+ * station (@NL80211_CMD_NEW_STATION). To stop this notification from
+ * reoccurring, the userspace authentication daemon may want to create the
+ * new station with the AUTHENTICATED flag unset and maybe change it later
+ * depending on the authentication result.
+ *
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ * Since wireless is more complex than wired ethernet, it supports
+ * various triggers. These triggers can be configured through this
+ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ * more background information, see
+ * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *
+ * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
+ * the necessary information for supporting GTK rekey offload. This
+ * feature is typically used during WoWLAN. The configuration data
+ * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
+ * contains the data in sub-attributes). After rekeying happened,
+ * this command may also be sent by the driver as an MLME event to
+ * inform userspace of the new replay counter.
+ *
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
+ * of PMKSA caching dandidates.
+ *
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
+ *
+ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
+ * (or GO) interface (i.e. hostapd) to ask for unexpected frames to
+ * implement sending deauth to stations that send unexpected class 3
+ * frames. Also used as the event sent by the kernel when such a frame
+ * is received.
+ * For the event, the %NL80211_ATTR_MAC attribute carries the TA and
+ * other attributes like the interface index are present.
+ * If used as the command it must have an interface index and you can
+ * only unsubscribe from the event by closing the socket. Subscription
+ * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
+ *
+ * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
+ * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
+ * and wasn't already in a 4-addr VLAN. The event will be sent similarly
+ * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
+ *
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
+ * by sending a null data frame to it and reporting when the frame is
+ * acknowleged. This is used to allow timing out inactive clients. Uses
+ * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
+ * direct reply with an %NL80211_ATTR_COOKIE that is later used to match
+ * up the event with the request. The event includes the same data and
+ * has %NL80211_ATTR_ACK set if the frame was ACKed.
+ *
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
+ * other BSSes when any interfaces are in AP mode. This helps implement
+ * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
+ * messages. Note that per PHY only one application may register.
+ *
+ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
+ * No Acknowledgement Policy should be applied.
+ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+enum nl80211_commands {
+/* don't change the order or add anything between, this is ABI! */
+ NL80211_CMD_UNSPEC,
+
+ NL80211_CMD_GET_WIPHY, /* can dump */
+ NL80211_CMD_SET_WIPHY,
+ NL80211_CMD_NEW_WIPHY,
+ NL80211_CMD_DEL_WIPHY,
+
+ NL80211_CMD_GET_INTERFACE, /* can dump */
+ NL80211_CMD_SET_INTERFACE,
+ NL80211_CMD_NEW_INTERFACE,
+ NL80211_CMD_DEL_INTERFACE,
+
+ NL80211_CMD_GET_KEY,
+ NL80211_CMD_SET_KEY,
+ NL80211_CMD_NEW_KEY,
+ NL80211_CMD_DEL_KEY,
+
+ NL80211_CMD_GET_BEACON,
+ NL80211_CMD_SET_BEACON,
+ NL80211_CMD_NEW_BEACON,
+ NL80211_CMD_DEL_BEACON,
+
+ NL80211_CMD_GET_STATION,
+ NL80211_CMD_SET_STATION,
+ NL80211_CMD_NEW_STATION,
+ NL80211_CMD_DEL_STATION,
+
+ NL80211_CMD_GET_MPATH,
+ NL80211_CMD_SET_MPATH,
+ NL80211_CMD_NEW_MPATH,
+ NL80211_CMD_DEL_MPATH,
+
+ NL80211_CMD_SET_BSS,
+
+ NL80211_CMD_SET_REG,
+ NL80211_CMD_REQ_SET_REG,
+
+ NL80211_CMD_GET_MESH_CONFIG,
+ NL80211_CMD_SET_MESH_CONFIG,
+
+ NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
+
+ NL80211_CMD_GET_REG,
+
+ NL80211_CMD_GET_SCAN,
+ NL80211_CMD_TRIGGER_SCAN,
+ NL80211_CMD_NEW_SCAN_RESULTS,
+ NL80211_CMD_SCAN_ABORTED,
+
+ NL80211_CMD_REG_CHANGE,
+
+ NL80211_CMD_AUTHENTICATE,
+ NL80211_CMD_ASSOCIATE,
+ NL80211_CMD_DEAUTHENTICATE,
+ NL80211_CMD_DISASSOCIATE,
+
+ NL80211_CMD_MICHAEL_MIC_FAILURE,
+
+ NL80211_CMD_REG_BEACON_HINT,
+
+ NL80211_CMD_JOIN_IBSS,
+ NL80211_CMD_LEAVE_IBSS,
+
+ NL80211_CMD_TESTMODE,
+
+ NL80211_CMD_CONNECT,
+ NL80211_CMD_ROAM,
+ NL80211_CMD_DISCONNECT,
+
+ NL80211_CMD_SET_WIPHY_NETNS,
+
+ NL80211_CMD_GET_SURVEY,
+ NL80211_CMD_NEW_SURVEY_RESULTS,
+
+ NL80211_CMD_SET_PMKSA,
+ NL80211_CMD_DEL_PMKSA,
+ NL80211_CMD_FLUSH_PMKSA,
+
+ NL80211_CMD_REMAIN_ON_CHANNEL,
+ NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+
+ NL80211_CMD_SET_TX_BITRATE_MASK,
+
+ NL80211_CMD_REGISTER_FRAME,
+ NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
+ NL80211_CMD_FRAME,
+ NL80211_CMD_ACTION = NL80211_CMD_FRAME,
+ NL80211_CMD_FRAME_TX_STATUS,
+ NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
+
+ NL80211_CMD_SET_POWER_SAVE,
+ NL80211_CMD_GET_POWER_SAVE,
+
+ NL80211_CMD_SET_CQM,
+ NL80211_CMD_NOTIFY_CQM,
+
+ NL80211_CMD_SET_CHANNEL,
+ NL80211_CMD_SET_WDS_PEER,
+
+ NL80211_CMD_FRAME_WAIT_CANCEL,
+
+ NL80211_CMD_JOIN_MESH,
+ NL80211_CMD_LEAVE_MESH,
+
+ NL80211_CMD_UNPROT_DEAUTHENTICATE,
+ NL80211_CMD_UNPROT_DISASSOCIATE,
+
+ NL80211_CMD_NEW_PEER_CANDIDATE,
+
+ NL80211_CMD_GET_WOWLAN,
+ NL80211_CMD_SET_WOWLAN,
+
+ NL80211_CMD_START_SCHED_SCAN,
+ NL80211_CMD_STOP_SCHED_SCAN,
+ NL80211_CMD_SCHED_SCAN_RESULTS,
+ NL80211_CMD_SCHED_SCAN_STOPPED,
+
+ NL80211_CMD_SET_REKEY_OFFLOAD,
+
+ NL80211_CMD_PMKSA_CANDIDATE,
+
+ NL80211_CMD_TDLS_OPER,
+ NL80211_CMD_TDLS_MGMT,
+
+ NL80211_CMD_UNEXPECTED_FRAME,
+
+ NL80211_CMD_PROBE_CLIENT,
+
+ NL80211_CMD_REGISTER_BEACONS,
+
+ NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
+
+ NL80211_CMD_SET_NOACK_MAP,
+
+ /* add new commands above here */
+
+ /* used to define NL80211_CMD_MAX below */
+ __NL80211_CMD_AFTER_LAST,
+ NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
+};
+
+/*
+ * Allow user space programs to use #ifdef on new commands by defining them
+ * here
+ */
+#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
+#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
+#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
+#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
+#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
+#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
+#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
+
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+/* source-level API compatibility */
+#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
+#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
+
+/**
+ * enum nl80211_attrs - nl80211 netlink attributes
+ *
+ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
+ *
+ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
+ * /sys/class/ieee80211/<phyname>/index
+ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
+ * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
+ * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ * this attribute)
+ * NL80211_CHAN_HT20 = HT20 only
+ * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
+ * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ * less than or equal to the RTS threshold; allowed range: 1..255;
+ * dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ * greater than the RTS threshold; allowed range: 1..255;
+ * dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ * length in octets for frames; allowed range: 256..8000, disable
+ * fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ * larger than or equal to this use RTS/CTS handshake); allowed range:
+ * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32
+ * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
+ * section 7.3.2.9; dot11CoverageClass; u8
+ *
+ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
+ * @NL80211_ATTR_IFNAME: network interface name
+ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
+ *
+ * @NL80211_ATTR_MAC: MAC address (various uses)
+ *
+ * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
+ * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ * keys
+ * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ * section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ * CCMP keys, each six bytes in little endian
+ *
+ * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
+ * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
+ * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
+ * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
+ *
+ * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
+ * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
+ * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
+ * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
+ * IEEE 802.11 7.3.1.6 (u16).
+ * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
+ * rates as defined by IEEE 802.11 7.3.2.2 but without the length
+ * restriction (at most %NL80211_MAX_SUPP_RATES).
+ * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
+ * to, or the AP interface the station was originally added to to.
+ * @NL80211_ATTR_STA_INFO: information about a station, part of station info
+ * given for %NL80211_CMD_GET_STATION, nested attribute containing
+ * info as possible, see &enum nl80211_sta_info.
+ *
+ * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
+ * consisting of a nested array.
+ *
+ * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+ * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ * &enum nl80211_mpath_info.
+ *
+ * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
+ * &enum nl80211_mntr_flags.
+ *
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
+ * current regulatory domain should be set to or is already set to.
+ * For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ * to query the CRDA to retrieve one regulatory domain. This attribute can
+ * also be used by userspace to query the kernel for the currently set
+ * regulatory domain. We chose an alpha2 as that is also used by the
+ * IEEE-802.11d country information element to identify a country.
+ * Users can also simply ask the wireless core to set regulatory domain
+ * to a specific alpha2.
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
+ * rules.
+ *
+ * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
+ * (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
+ * (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ * restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION)
+ *
+ * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
+ * supported interface types, each a flag attribute with the number
+ * of the interface mode.
+ *
+ * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
+ * %NL80211_CMD_SET_MGMT_EXTRA_IE.
+ *
+ * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
+ * %NL80211_CMD_SET_MGMT_EXTRA_IE).
+ *
+ * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
+ * a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
+ * scan with a single scheduled scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
+ * that can be added to a scan request
+ * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
+ * elements that can be added to a scheduled scan request
+ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
+ * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
+ *
+ * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
+ * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
+ * scanning and include a zero-length SSID (wildcard) for wildcard scan
+ * @NL80211_ATTR_BSS: scan result BSS
+ *
+ * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
+ * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
+ * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *
+ * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
+ * an array of command numbers (i.e. a mapping index to command number)
+ * that the driver for the given wiphy supports.
+ *
+ * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
+ * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
+ * NL80211_CMD_ASSOCIATE events
+ * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
+ * represented as a u32
+ * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
+ * %NL80211_CMD_DISASSOCIATE, u16
+ *
+ * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
+ * a u32
+ *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+ * due to considerations from a beacon hint. This attribute reflects
+ * the state of the channel _before_ the beacon hint processing. This
+ * attributes consists of a nested attribute containing
+ * NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+ * due to considerations from a beacon hint. This attribute reflects
+ * the state of the channel _after_ the beacon hint processing. This
+ * attributes consists of a nested attribute containing
+ * NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ * cipher suites
+ *
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ * for other networks on different channels
+ *
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
+ * is used, e.g., with %NL80211_CMD_AUTHENTICATE event
+ *
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
+ * used for the association (&enum nl80211_mfp, represented as a u32);
+ * this attribute can be used
+ * with %NL80211_CMD_ASSOCIATE request
+ *
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
+ * &struct nl80211_sta_flag_update.
+ *
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
+ * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
+ * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
+ * request, the driver will assume that the port is unauthorized until
+ * authorized by user space. Otherwise, port is marked authorized by
+ * default in station mode.
+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
+ * ethertype that will be used for key negotiation. It can be
+ * specified with the associate and connect commands. If it is not
+ * specified, the value defaults to 0x888E (PAE, 802.1X). This
+ * attribute is also used as a flag in the wiphy information to
+ * indicate that protocols other than PAE are supported.
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
+ * ethertype frames used for key negotiation must not be encrypted.
+ *
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ * We recommend using nested, driver-specific attributes within this.
+ *
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ * event was due to the AP disconnecting the station, and not due to
+ * a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ * event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ * that protected APs should be used. This is also used with NEW_BEACON to
+ * indicate that the BSS is to use protection.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
+ * to indicate which unicast key ciphers will be used with the connection
+ * (an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which group key cipher will be used with the connection (a
+ * u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which WPA version(s) the AP we want to associate with is using
+ * (a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ * sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ * sent by peer, for ROAM and successful CONNECT events.
+ *
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
+ * commands to specify using a reassociate frame
+ *
+ * @NL80211_ATTR_KEY: key information in a nested attribute with
+ * %NL80211_KEY_* sub-attributes
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
+ * and join_ibss(), key information is in a nested attribute each
+ * with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ * dumps. This number increases whenever the object list being
+ * dumped changes, and as such userspace can verify that it has
+ * obtained a complete and consistent snapshot by verifying that
+ * all dump messages contain the same generation number. If it
+ * changed then the list changed and the dump should be repeated
+ * completely from scratch.
+ *
+ * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
+ *
+ * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
+ * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
+ * containing info as possible, see &enum survey_info.
+ *
+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
+ * cache, a wiphy attribute.
+ *
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
+ * specifies the maximum duration that can be requested with the
+ * remain-on-channel operation, in milliseconds, u32.
+ *
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
+ *
+ * @NL80211_ATTR_TX_RATES: Nested set of attributes
+ * (enum nl80211_tx_rate_attributes) describing TX rates per band. The
+ * enum nl80211_band value is used as the index (nla_type() of the nested
+ * data. If a band is not included, it will be configured to allow all
+ * rates based on negotiated supported rates information. This attribute
+ * is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *
+ * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+ * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+ * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
+ * @NL80211_CMD_REGISTER_FRAME command.
+ * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
+ * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ * information about which frame types can be transmitted with
+ * %NL80211_CMD_FRAME.
+ * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
+ * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ * information about which frame types can be registered for RX.
+ *
+ * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
+ * acknowledged by the recipient.
+ *
+ * @NL80211_ATTR_CQM: connection quality monitor configuration in a
+ * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
+ *
+ * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
+ * is requesting a local authentication/association state change without
+ * invoking actual management frame exchange. This can be used with
+ * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
+ * NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
+ * connected to this BSS.
+ *
+ * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
+ * &enum nl80211_tx_power_setting for possible values.
+ * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
+ * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
+ * for non-automatic settings.
+ *
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
+ * means support for per-station GTKs.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
+ * This can be used to mask out antennas which are not attached or should
+ * not be used for transmitting. If an antenna is not selected in this
+ * bitmap the hardware is not allowed to transmit on this antenna.
+ *
+ * Each bit represents one antenna, starting with antenna 1 at the first
+ * bit. Depending on which antennas are selected in the bitmap, 802.11n
+ * drivers can derive which chainmasks to use (if all antennas belonging to
+ * a particular chain are disabled this chain should be disabled) and if
+ * a chain has diversity antennas wether diversity should be used or not.
+ * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ * derived from the available chains after applying the antenna mask.
+ * Non-802.11n drivers can derive wether to use diversity or not.
+ * Drivers may reject configurations or RX/TX mask combinations they cannot
+ * support by returning -EINVAL.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
+ * This can be used to mask out antennas which are not attached or should
+ * not be used for receiving. If an antenna is not selected in this bitmap
+ * the hardware should not be configured to receive on this antenna.
+ * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
+ * for configuration as TX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
+ * for configuration as RX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
+ *
+ * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
+ * transmitted on another channel when the channel given doesn't match
+ * the current channel. If the current channel doesn't match and this
+ * flag isn't set, the frame will be rejected. This is also used as an
+ * nl80211 capability flag.
+ *
+ * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
+ *
+ * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ * attributes, specifying what a key should be set as default as.
+ * See &enum nl80211_key_default_types.
+ *
+ * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be
+ * changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ * containing attributes from &enum nl80211_meshconf_params.
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
+ * allows auth frames in a mesh to be passed to userspace for processing via
+ * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
+ * defined in &enum nl80211_plink_state. Used when userspace is
+ * driving the peer link management state machine.
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ *
+ * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
+ * capabilities, the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ * indicate which WoW triggers should be enabled. This is also
+ * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ * triggers.
+
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ * cycles, in msecs.
+
+ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
+ * sets of attributes to match during scheduled scans. Only BSSs
+ * that match any of the sets will be reported. These are
+ * pass-thru filter rules.
+ * For a match to succeed, the BSS must match all attributes of a
+ * set. Since not every hardware supports matching all types of
+ * attributes, there is no guarantee that the reported BSSs are
+ * fully complying with the match sets and userspace needs to be
+ * able to ignore them by itself.
+ * Thus, the implementation is somewhat hardware-dependent, but
+ * this is only an optimization and the userspace application
+ * needs to handle all the non-filtered results anyway.
+ * If the match attributes don't make sense when combined with
+ * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
+ * is included in the probe request, but the match attributes
+ * will never let it go through), -EINVAL may be returned.
+ * If ommited, no filtering is done.
+ *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ * interface combinations. In each nested item, it contains attributes
+ * defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ * are managed in software: interfaces of these types aren't subject to
+ * any restrictions in their number or combinations.
+ *
+ * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
+ *
+ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
+ * nested array attribute containing an entry for each band, with the entry
+ * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
+ * without the length restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
+ * and Probe Response (when response to wildcard Probe Request); see
+ * &enum nl80211_hidden_ssid, represented as a u32
+ *
+ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
+ * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
+ * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
+ * driver (or firmware) replies to Probe Request frames.
+ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
+ * Response frames. This is used with %NL80211_CMD_NEW_BEACON and
+ * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
+ * (Re)Association Response frames when the driver (or firmware) replies to
+ * (Re)Association Request frames.
+ *
+ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
+ * of the station, see &enum nl80211_sta_wme_attr.
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
+ * as AP.
+ *
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
+ * roaming to another AP in the same ESS if the signal lever is low.
+ *
+ * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
+ * candidate information, see &enum nl80211_pmksa_candidate_attr.
+ *
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
+ * for management frames transmission. In order to avoid p2p probe/action
+ * frames are being transmitted at CCK rate in 2GHz band, the user space
+ * applications use this attribute.
+ * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
+ * %NL80211_CMD_FRAME commands.
+ *
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
+ * request, link setup confirm, link teardown, etc.). Values are
+ * described in the TDLS (802.11z) specification.
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
+ * TDLS conversation between two devices.
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
+ * &enum nl80211_tdls_operation, represented as a u8.
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
+ * as a TDLS peer sta.
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
+ * procedures should be performed by sending TDLS packets via
+ * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
+ * used for asking the driver to perform a TDLS operation.
+ *
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ * that have AP support to indicate that they have the AP SME integrated
+ * with support for the features listed in this attribute, see
+ * &enum nl80211_ap_sme_features.
+ *
+ * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
+ * the driver to not wait for an acknowledgement. Note that due to this,
+ * it will also not give a status callback nor return a cookie. This is
+ * mostly useful for probe responses to save airtime.
+ *
+ * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
+ * &enum nl80211_feature_flags and is advertised in wiphy information.
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
+ *
+ * requests while operating in AP-mode.
+ * This attribute holds a bitmap of the supported protocols for
+ * offloading (see &enum nl80211_probe_resp_offload_support_attr).
+ *
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+ * probe-response frame. The DA field in the 802.11 header is zero-ed out,
+ * to be filled by the FW.
+ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
+ * this feature. Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+ * ATTR_HT_CAPABILITY to which attention should be paid.
+ * Currently, only mac80211 NICs support this feature.
+ * The values that may be configured are:
+ * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
+ * AMPDU density and AMPDU factor.
+ * All values are treated as suggestions and may be ignored
+ * by the driver as required. The actual values may be seen in
+ * the station debugfs ht_caps file.
+ *
+ * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
+ * abides to when initiating radiation on DFS channels. A country maps
+ * to one DFS region.
+ *
+ * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
+ * up to 16 TIDs.
+ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_attrs {
+/* don't change the order or add anything between, this is ABI! */
+ NL80211_ATTR_UNSPEC,
+
+ NL80211_ATTR_WIPHY,
+ NL80211_ATTR_WIPHY_NAME,
+
+ NL80211_ATTR_IFINDEX,
+ NL80211_ATTR_IFNAME,
+ NL80211_ATTR_IFTYPE,
+
+ NL80211_ATTR_MAC,
+
+ NL80211_ATTR_KEY_DATA,
+ NL80211_ATTR_KEY_IDX,
+ NL80211_ATTR_KEY_CIPHER,
+ NL80211_ATTR_KEY_SEQ,
+ NL80211_ATTR_KEY_DEFAULT,
+
+ NL80211_ATTR_BEACON_INTERVAL,
+ NL80211_ATTR_DTIM_PERIOD,
+ NL80211_ATTR_BEACON_HEAD,
+ NL80211_ATTR_BEACON_TAIL,
+
+ NL80211_ATTR_STA_AID,
+ NL80211_ATTR_STA_FLAGS,
+ NL80211_ATTR_STA_LISTEN_INTERVAL,
+ NL80211_ATTR_STA_SUPPORTED_RATES,
+ NL80211_ATTR_STA_VLAN,
+ NL80211_ATTR_STA_INFO,
+
+ NL80211_ATTR_WIPHY_BANDS,
+
+ NL80211_ATTR_MNTR_FLAGS,
+
+ NL80211_ATTR_MESH_ID,
+ NL80211_ATTR_STA_PLINK_ACTION,
+ NL80211_ATTR_MPATH_NEXT_HOP,
+ NL80211_ATTR_MPATH_INFO,
+
+ NL80211_ATTR_BSS_CTS_PROT,
+ NL80211_ATTR_BSS_SHORT_PREAMBLE,
+ NL80211_ATTR_BSS_SHORT_SLOT_TIME,
+
+ NL80211_ATTR_HT_CAPABILITY,
+
+ NL80211_ATTR_SUPPORTED_IFTYPES,
+
+ NL80211_ATTR_REG_ALPHA2,
+ NL80211_ATTR_REG_RULES,
+
+ NL80211_ATTR_MESH_CONFIG,
+
+ NL80211_ATTR_BSS_BASIC_RATES,
+
+ NL80211_ATTR_WIPHY_TXQ_PARAMS,
+ NL80211_ATTR_WIPHY_FREQ,
+ NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+
+ NL80211_ATTR_KEY_DEFAULT_MGMT,
+
+ NL80211_ATTR_MGMT_SUBTYPE,
+ NL80211_ATTR_IE,
+
+ NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
+
+ NL80211_ATTR_SCAN_FREQUENCIES,
+ NL80211_ATTR_SCAN_SSIDS,
+ NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
+ NL80211_ATTR_BSS,
+
+ NL80211_ATTR_REG_INITIATOR,
+ NL80211_ATTR_REG_TYPE,
+
+ NL80211_ATTR_SUPPORTED_COMMANDS,
+
+ NL80211_ATTR_FRAME,
+ NL80211_ATTR_SSID,
+ NL80211_ATTR_AUTH_TYPE,
+ NL80211_ATTR_REASON_CODE,
+
+ NL80211_ATTR_KEY_TYPE,
+
+ NL80211_ATTR_MAX_SCAN_IE_LEN,
+ NL80211_ATTR_CIPHER_SUITES,
+
+ NL80211_ATTR_FREQ_BEFORE,
+ NL80211_ATTR_FREQ_AFTER,
+
+ NL80211_ATTR_FREQ_FIXED,
+
+
+ NL80211_ATTR_WIPHY_RETRY_SHORT,
+ NL80211_ATTR_WIPHY_RETRY_LONG,
+ NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+
+ NL80211_ATTR_TIMED_OUT,
+
+ NL80211_ATTR_USE_MFP,
+
+ NL80211_ATTR_STA_FLAGS2,
+
+ NL80211_ATTR_CONTROL_PORT,
+
+ NL80211_ATTR_TESTDATA,
+
+ NL80211_ATTR_PRIVACY,
+
+ NL80211_ATTR_DISCONNECTED_BY_AP,
+ NL80211_ATTR_STATUS_CODE,
+
+ NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ NL80211_ATTR_CIPHER_SUITE_GROUP,
+ NL80211_ATTR_WPA_VERSIONS,
+ NL80211_ATTR_AKM_SUITES,
+
+ NL80211_ATTR_REQ_IE,
+ NL80211_ATTR_RESP_IE,
+
+ NL80211_ATTR_PREV_BSSID,
+
+ NL80211_ATTR_KEY,
+ NL80211_ATTR_KEYS,
+
+ NL80211_ATTR_PID,
+
+ NL80211_ATTR_4ADDR,
+
+ NL80211_ATTR_SURVEY_INFO,
+
+ NL80211_ATTR_PMKID,
+ NL80211_ATTR_MAX_NUM_PMKIDS,
+
+ NL80211_ATTR_DURATION,
+
+ NL80211_ATTR_COOKIE,
+
+ NL80211_ATTR_WIPHY_COVERAGE_CLASS,
+
+ NL80211_ATTR_TX_RATES,
+
+ NL80211_ATTR_FRAME_MATCH,
+
+ NL80211_ATTR_ACK,
+
+ NL80211_ATTR_PS_STATE,
+
+ NL80211_ATTR_CQM,
+
+ NL80211_ATTR_LOCAL_STATE_CHANGE,
+
+ NL80211_ATTR_AP_ISOLATE,
+
+ NL80211_ATTR_WIPHY_TX_POWER_SETTING,
+ NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
+
+ NL80211_ATTR_TX_FRAME_TYPES,
+ NL80211_ATTR_RX_FRAME_TYPES,
+ NL80211_ATTR_FRAME_TYPE,
+
+ NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+
+ NL80211_ATTR_SUPPORT_IBSS_RSN,
+
+ NL80211_ATTR_WIPHY_ANTENNA_TX,
+ NL80211_ATTR_WIPHY_ANTENNA_RX,
+
+ NL80211_ATTR_MCAST_RATE,
+
+ NL80211_ATTR_OFFCHANNEL_TX_OK,
+
+ NL80211_ATTR_BSS_HT_OPMODE,
+
+ NL80211_ATTR_KEY_DEFAULT_TYPES,
+
+ NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
+
+ NL80211_ATTR_MESH_SETUP,
+
+ NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
+ NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+
+ NL80211_ATTR_SUPPORT_MESH_AUTH,
+ NL80211_ATTR_STA_PLINK_STATE,
+
+ NL80211_ATTR_WOWLAN_TRIGGERS,
+ NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
+ NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
+ NL80211_ATTR_INTERFACE_COMBINATIONS,
+ NL80211_ATTR_SOFTWARE_IFTYPES,
+
+ NL80211_ATTR_REKEY_DATA,
+
+ NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
+ NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
+
+ NL80211_ATTR_SCAN_SUPP_RATES,
+
+ NL80211_ATTR_HIDDEN_SSID,
+
+ NL80211_ATTR_IE_PROBE_RESP,
+ NL80211_ATTR_IE_ASSOC_RESP,
+
+ NL80211_ATTR_STA_WME,
+ NL80211_ATTR_SUPPORT_AP_UAPSD,
+
+ NL80211_ATTR_ROAM_SUPPORT,
+
+ NL80211_ATTR_SCHED_SCAN_MATCH,
+ NL80211_ATTR_MAX_MATCH_SETS,
+
+ NL80211_ATTR_PMKSA_CANDIDATE,
+
+ NL80211_ATTR_TX_NO_CCK_RATE,
+
+ NL80211_ATTR_TDLS_ACTION,
+ NL80211_ATTR_TDLS_DIALOG_TOKEN,
+ NL80211_ATTR_TDLS_OPERATION,
+ NL80211_ATTR_TDLS_SUPPORT,
+ NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+
+ NL80211_ATTR_DEVICE_AP_SME,
+
+ NL80211_ATTR_DONT_WAIT_FOR_ACK,
+
+ NL80211_ATTR_FEATURE_FLAGS,
+
+ NL80211_ATTR_PROBE_RESP_OFFLOAD,
+
+ NL80211_ATTR_PROBE_RESP,
+
+ NL80211_ATTR_DFS_REGION,
+
+ NL80211_ATTR_DISABLE_HT,
+ NL80211_ATTR_HT_CAPABILITY_MASK,
+
+ NL80211_ATTR_NOACK_MAP,
+
+ /* add attributes here, update the policy in nl80211.c */
+
+ __NL80211_ATTR_AFTER_LAST,
+ NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
+};
+
+/* source-level API compatibility */
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
+
+/*
+ * Allow user space programs to use #ifdef on new attributes by defining them
+ * here
+ */
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
+#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
+#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
+#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
+#define NL80211_ATTR_IE NL80211_ATTR_IE
+#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
+#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
+#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
+#define NL80211_ATTR_SSID NL80211_ATTR_SSID
+#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
+#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+#define NL80211_MAX_SUPP_RATES 32
+#define NL80211_MAX_SUPP_HT_RATES 77
+#define NL80211_MAX_SUPP_REG_RULES 32
+#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
+#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
+#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
+#define NL80211_HT_CAPABILITY_LEN 26
+
+#define NL80211_MAX_NR_CIPHER_SUITES 5
+#define NL80211_MAX_NR_AKM_SUITES 2
+
+/**
+ * enum nl80211_iftype - (virtual) interface types
+ *
+ * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
+ * @NL80211_IFTYPE_ADHOC: independent BSS member
+ * @NL80211_IFTYPE_STATION: managed BSS member
+ * @NL80211_IFTYPE_AP: access point
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ * are a bit special in that they must always be tied to a pre-existing
+ * AP type interface.
+ * @NL80211_IFTYPE_WDS: wireless distribution interface
+ * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+ * @NL80211_IFTYPE_MESH_POINT: mesh point
+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
+ * @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+ * @NUM_NL80211_IFTYPES: number of defined interface types
+ *
+ * These values are used with the %NL80211_ATTR_IFTYPE
+ * to set the type of an interface.
+ *
+ */
+enum nl80211_iftype {
+ NL80211_IFTYPE_UNSPECIFIED,
+ NL80211_IFTYPE_ADHOC,
+ NL80211_IFTYPE_STATION,
+ NL80211_IFTYPE_AP,
+ NL80211_IFTYPE_AP_VLAN,
+ NL80211_IFTYPE_WDS,
+ NL80211_IFTYPE_MONITOR,
+ NL80211_IFTYPE_MESH_POINT,
+ NL80211_IFTYPE_P2P_CLIENT,
+ NL80211_IFTYPE_P2P_GO,
+
+ /* keep last */
+ NUM_NL80211_IFTYPES,
+ NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
+};
+
+/**
+ * enum nl80211_sta_flags - station flags
+ *
+ * Station flags. When a station is added to an AP interface, it is
+ * assumed to be already associated (and hence authenticated.)
+ *
+ * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
+ * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
+ * with short barker preamble
+ * @NL80211_STA_FLAG_WME: station is WME/QoS capable
+ * @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
+ * only be used in managed mode (even in the flags mask). Note that the
+ * flag can't be changed, it is only valid while adding a station, and
+ * attempts to change it will silently be ignored (rather than rejected
+ * as errors.)
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use
+ */
+enum nl80211_sta_flags {
+ __NL80211_STA_FLAG_INVALID,
+ NL80211_STA_FLAG_AUTHORIZED,
+ NL80211_STA_FLAG_SHORT_PREAMBLE,
+ NL80211_STA_FLAG_WME,
+ NL80211_STA_FLAG_MFP,
+ NL80211_STA_FLAG_AUTHENTICATED,
+ NL80211_STA_FLAG_TDLS_PEER,
+
+ /* keep last */
+ __NL80211_STA_FLAG_AFTER_LAST,
+ NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * struct nl80211_sta_flag_update - station flags mask/set
+ * @mask: mask of station flags to set
+ * @set: which values to set them to
+ *
+ * Both mask and set contain bits as per &enum nl80211_sta_flags.
+ */
+struct nl80211_sta_flag_update {
+ __u32 mask;
+ __u32 set;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_rate_info {
+ __NL80211_RATE_INFO_INVALID,
+ NL80211_RATE_INFO_BITRATE,
+ NL80211_RATE_INFO_MCS,
+ NL80211_RATE_INFO_40_MHZ_WIDTH,
+ NL80211_RATE_INFO_SHORT_GI,
+
+ /* keep last */
+ __NL80211_RATE_INFO_AFTER_LAST,
+ NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_bss_param - BSS information collected by STA
+ *
+ * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled
+ * (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled
+ * (flag)
+ * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
+ * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
+ * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
+ * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
+ */
+enum nl80211_sta_bss_param {
+ __NL80211_STA_BSS_PARAM_INVALID,
+ NL80211_STA_BSS_PARAM_CTS_PROT,
+ NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
+ NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
+ NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+ NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+
+ /* keep last */
+ __NL80211_STA_BSS_PARAM_AFTER_LAST,
+ NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_info - station information
+ *
+ * These attribute types are used with %NL80211_ATTR_STA_INFO
+ * when getting information about a station.
+ *
+ * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * containing info as possible, see &enum nl80211_rate_info
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+ * station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ * (see %enum nl80211_plink_state)
+ * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
+ * attribute, like NL80211_STA_INFO_TX_BITRATE.
+ * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
+ * containing info as possible, see &enum nl80211_sta_bss_param
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
+ * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
+ * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
+ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+enum nl80211_sta_info {
+ __NL80211_STA_INFO_INVALID,
+ NL80211_STA_INFO_INACTIVE_TIME,
+ NL80211_STA_INFO_RX_BYTES,
+ NL80211_STA_INFO_TX_BYTES,
+ NL80211_STA_INFO_LLID,
+ NL80211_STA_INFO_PLID,
+ NL80211_STA_INFO_PLINK_STATE,
+ NL80211_STA_INFO_SIGNAL,
+ NL80211_STA_INFO_TX_BITRATE,
+ NL80211_STA_INFO_RX_PACKETS,
+ NL80211_STA_INFO_TX_PACKETS,
+ NL80211_STA_INFO_TX_RETRIES,
+ NL80211_STA_INFO_TX_FAILED,
+ NL80211_STA_INFO_SIGNAL_AVG,
+ NL80211_STA_INFO_RX_BITRATE,
+ NL80211_STA_INFO_BSS_PARAM,
+ NL80211_STA_INFO_CONNECTED_TIME,
+ NL80211_STA_INFO_STA_FLAGS,
+ NL80211_STA_INFO_BEACON_LOSS,
+ NL80211_STA_INFO_CHAIN_SIGNAL,
+ NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
+
+ /* keep last */
+ __NL80211_STA_INFO_AFTER_LAST,
+ NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mpath_flags - nl80211 mesh path flags
+ *
+ * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
+ * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
+ * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
+ * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
+ */
+enum nl80211_mpath_flags {
+ NL80211_MPATH_FLAG_ACTIVE = 1<<0,
+ NL80211_MPATH_FLAG_RESOLVING = 1<<1,
+ NL80211_MPATH_FLAG_SN_VALID = 1<<2,
+ NL80211_MPATH_FLAG_FIXED = 1<<3,
+ NL80211_MPATH_FLAG_RESOLVED = 1<<4,
+};
+
+/**
+ * enum nl80211_mpath_info - mesh path information
+ *
+ * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
+ * information about a mesh path.
+ *
+ * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_MPATH_INFO_SN: destination sequence number
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
+ * &enum nl80211_mpath_flags;
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
+ * currently defind
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_mpath_info {
+ __NL80211_MPATH_INFO_INVALID,
+ NL80211_MPATH_INFO_FRAME_QLEN,
+ NL80211_MPATH_INFO_SN,
+ NL80211_MPATH_INFO_METRIC,
+ NL80211_MPATH_INFO_EXPTIME,
+ NL80211_MPATH_INFO_FLAGS,
+ NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
+ NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+
+ /* keep last */
+ __NL80211_MPATH_INFO_AFTER_LAST,
+ NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band_attr - band attributes
+ * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
+ * an array of nested frequency attributes
+ * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
+ * an array of nested bitrate attributes
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
+ * defined in 802.11n
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_band_attr {
+ __NL80211_BAND_ATTR_INVALID,
+ NL80211_BAND_ATTR_FREQS,
+ NL80211_BAND_ATTR_RATES,
+
+ NL80211_BAND_ATTR_HT_MCS_SET,
+ NL80211_BAND_ATTR_HT_CAPA,
+ NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
+ NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+
+ /* keep last */
+ __NL80211_BAND_ATTR_AFTER_LAST,
+ NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
+/**
+ * enum nl80211_frequency_attr - frequency attributes
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
+ * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
+ * regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
+ * permitted on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
+ * (100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ * currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_frequency_attr {
+ __NL80211_FREQUENCY_ATTR_INVALID,
+ NL80211_FREQUENCY_ATTR_FREQ,
+ NL80211_FREQUENCY_ATTR_DISABLED,
+ NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
+ NL80211_FREQUENCY_ATTR_NO_IBSS,
+ NL80211_FREQUENCY_ATTR_RADAR,
+ NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+
+ /* keep last */
+ __NL80211_FREQUENCY_ATTR_AFTER_LAST,
+ NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+
+/**
+ * enum nl80211_bitrate_attr - bitrate attributes
+ * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
+ * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
+ * in 2.4 GHz band.
+ * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
+ * currently defined
+ * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_bitrate_attr {
+ __NL80211_BITRATE_ATTR_INVALID,
+ NL80211_BITRATE_ATTR_RATE,
+ NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
+
+ /* keep last */
+ __NL80211_BITRATE_ATTR_AFTER_LAST,
+ NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
+ * regulatory domain.
+ * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
+ * regulatory domain.
+ * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
+ * wireless core it thinks its knows the regulatory domain we should be in.
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
+ * 802.11 country information element with regulatory information it
+ * thinks we should consider. cfg80211 only processes the country
+ * code from the IE, and relies on the regulatory domain information
+ * structure passed by userspace (CRDA) from our wireless-regdb.
+ * If a channel is enabled but the country code indicates it should
+ * be disabled we disable the channel and re-enable it upon disassociation.
+ */
+enum nl80211_reg_initiator {
+ NL80211_REGDOM_SET_BY_CORE,
+ NL80211_REGDOM_SET_BY_USER,
+ NL80211_REGDOM_SET_BY_DRIVER,
+ NL80211_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum nl80211_reg_type - specifies the type of regulatory domain
+ * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
+ * to a specific country. When this is set you can count on the
+ * ISO / IEC 3166 alpha2 country code being valid.
+ * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
+ * domain.
+ * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
+ * driver specific world regulatory domain. These do not apply system-wide
+ * and are only applicable to the individual devices which have requested
+ * them to be applied.
+ * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
+ * of an intersection between two regulatory domains -- the previously
+ * set regulatory domain on the system and the last accepted regulatory
+ * domain request to be processed.
+ */
+enum nl80211_reg_type {
+ NL80211_REGDOM_TYPE_COUNTRY,
+ NL80211_REGDOM_TYPE_WORLD,
+ NL80211_REGDOM_TYPE_CUSTOM_WORLD,
+ NL80211_REGDOM_TYPE_INTERSECTION,
+};
+
+/**
+ * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
+ * considerations for a given frequency range. These are the
+ * &enum nl80211_reg_rule_flags.
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
+ * rule in KHz. This is not a center of frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
+ * in KHz. This is not a center a frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+ * frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ * for a given frequency range. The value is in mBi (100 * dBi).
+ * If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ * a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ * currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_reg_rule_attr {
+ __NL80211_REG_RULE_ATTR_INVALID,
+ NL80211_ATTR_REG_RULE_FLAGS,
+
+ NL80211_ATTR_FREQ_RANGE_START,
+ NL80211_ATTR_FREQ_RANGE_END,
+ NL80211_ATTR_FREQ_RANGE_MAX_BW,
+
+ NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+ NL80211_ATTR_POWER_RULE_MAX_EIRP,
+
+ /* keep last */
+ __NL80211_REG_RULE_ATTR_AFTER_LAST,
+ NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ * attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_match_attr {
+ __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
+
+ NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
+
+ /* keep last */
+ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+ NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
+ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_reg_rule_flags - regulatory rule flags
+ *
+ * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
+ * @NL80211_RRF_NO_CCK: CCK modulation not allowed
+ * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
+ * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
+ * @NL80211_RRF_DFS: DFS support is required to be used
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
+ * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
+ * @NL80211_RRF_NO_IBSS: no IBSS is allowed
+ */
+enum nl80211_reg_rule_flags {
+ NL80211_RRF_NO_OFDM = 1<<0,
+ NL80211_RRF_NO_CCK = 1<<1,
+ NL80211_RRF_NO_INDOOR = 1<<2,
+ NL80211_RRF_NO_OUTDOOR = 1<<3,
+ NL80211_RRF_DFS = 1<<4,
+ NL80211_RRF_PTP_ONLY = 1<<5,
+ NL80211_RRF_PTMP_ONLY = 1<<6,
+ NL80211_RRF_PASSIVE_SCAN = 1<<7,
+ NL80211_RRF_NO_IBSS = 1<<8,
+};
+
+/**
+ * enum nl80211_dfs_regions - regulatory DFS regions
+ *
+ * @NL80211_DFS_UNSET: Country has no DFS master region specified
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI
+ * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec
+ */
+enum nl80211_dfs_regions {
+ NL80211_DFS_UNSET = 0,
+ NL80211_DFS_FCC = 1,
+ NL80211_DFS_ETSI = 2,
+ NL80211_DFS_JP = 3,
+};
+
+/**
+ * enum nl80211_survey_info - survey information
+ *
+ * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
+ * when getting information about a survey.
+ *
+ * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+ * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
+ * spent on this channel
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ * channel was sensed busy (either due to activity or energy detect)
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ * channel was sensed busy
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
+ * receiving data
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
+ * transmitting data
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ * currently defined
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_survey_info {
+ __NL80211_SURVEY_INFO_INVALID,
+ NL80211_SURVEY_INFO_FREQUENCY,
+ NL80211_SURVEY_INFO_NOISE,
+ NL80211_SURVEY_INFO_IN_USE,
+ NL80211_SURVEY_INFO_CHANNEL_TIME,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
+
+ /* keep last */
+ __NL80211_SURVEY_INFO_AFTER_LAST,
+ NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mntr_flags - monitor configuration flags
+ *
+ * Monitor configuration flags.
+ *
+ * @__NL80211_MNTR_FLAG_INVALID: reserved
+ *
+ * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @NL80211_MNTR_FLAG_CONTROL: pass control frames
+ * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
+ * overrides all other flags.
+ *
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
+ */
+enum nl80211_mntr_flags {
+ __NL80211_MNTR_FLAG_INVALID,
+ NL80211_MNTR_FLAG_FCSFAIL,
+ NL80211_MNTR_FLAG_PLCPFAIL,
+ NL80211_MNTR_FLAG_CONTROL,
+ NL80211_MNTR_FLAG_OTHER_BSS,
+ NL80211_MNTR_FLAG_COOK_FRAMES,
+
+ /* keep last */
+ __NL80211_MNTR_FLAG_AFTER_LAST,
+ NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_meshconf_params - mesh configuration parameters
+ *
+ * Mesh configuration parameters. These can be changed while the mesh is
+ * active.
+ *
+ * @__NL80211_MESHCONF_INVALID: internal use
+ *
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
+ * millisecond units, used by the Peer Link Open message
+ *
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
+ * millisecond units, used by the peer link management to close a peer link
+ *
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
+ * millisecond units
+ *
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
+ * on this mesh interface
+ *
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
+ * open retries that can be sent to establish a new peer link instance in a
+ * mesh
+ *
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
+ * point.
+ *
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
+ * open peer links when we detect compatible mesh peers.
+ *
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
+ * containing a PREQ that an MP can send to a particular destination (path
+ * target)
+ *
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
+ * (in milliseconds)
+ *
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
+ * until giving up on a path discovery (in milliseconds)
+ *
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
+ * points receiving a PREQ shall consider the forwarding information from the
+ * root to be valid. (TU = time unit)
+ *
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which an MP can send only one action frame containing a PREQ
+ * reference element
+ *
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ * that it takes for an HWMP information element to propagate across the mesh
+ *
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
+ *
+ * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
+ * source mesh point for path selection elements.
+ *
+ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between
+ * root announcements are transmitted.
+ *
+ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
+ * access to a broader network beyond the MBSS. This is done via Root
+ * Announcement frames.
+ *
+ * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which a mesh STA can send only one Action frame containing a
+ * PERR element.
+ *
+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
+ * or forwarding entity (default is TRUE - forwarding entity)
+ *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_meshconf_params {
+ __NL80211_MESHCONF_INVALID,
+ NL80211_MESHCONF_RETRY_TIMEOUT,
+ NL80211_MESHCONF_CONFIRM_TIMEOUT,
+ NL80211_MESHCONF_HOLDING_TIMEOUT,
+ NL80211_MESHCONF_MAX_PEER_LINKS,
+ NL80211_MESHCONF_MAX_RETRIES,
+ NL80211_MESHCONF_TTL,
+ NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+ NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+ NL80211_MESHCONF_PATH_REFRESH_TIME,
+ NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+ NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+ NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+ NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+ NL80211_MESHCONF_HWMP_ROOTMODE,
+ NL80211_MESHCONF_ELEMENT_TTL,
+ NL80211_MESHCONF_HWMP_RANN_INTERVAL,
+ NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
+ NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
+ NL80211_MESHCONF_FORWARDING,
+
+ /* keep last */
+ __NL80211_MESHCONF_ATTR_AFTER_LAST,
+ NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mesh_setup_params - mesh setup parameters
+ *
+ * Mesh setup parameters. These are used to start/join a mesh and cannot be
+ * changed while the mesh is active.
+ *
+ * @__NL80211_MESH_SETUP_INVALID: Internal use
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
+ * vendor specific path selection algorithm or disable it to use the default
+ * HWMP.
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
+ * vendor specific path metric or disable it to use the default Airtime
+ * metric.
+ *
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
+ * robust security network ie, or a vendor specific information element that
+ * vendors will use to identify the path selection methods and metrics in use.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
+ * daemon will be authenticating mesh candidates.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ * daemon will be securing peer link frames. AMPE is a secured version of Mesh
+ * Peering Management (MPM) and is implemented with the assistance of a
+ * userspace daemon. When this flag is set, the kernel will send peer
+ * management frames to a userspace daemon that will implement AMPE
+ * functionality (security capabilities selection, key confirmation, and key
+ * management). When the flag is unset (default), the kernel can autonomously
+ * complete (unsecured) mesh peering without the need of a userspace daemon.
+ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+ */
+enum nl80211_mesh_setup_params {
+ __NL80211_MESH_SETUP_INVALID,
+ NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
+ NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
+ NL80211_MESH_SETUP_IE,
+ NL80211_MESH_SETUP_USERSPACE_AUTH,
+ NL80211_MESH_SETUP_USERSPACE_AMPE,
+
+ /* keep last */
+ __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+ NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ * disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ * 2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ * 2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+ __NL80211_TXQ_ATTR_INVALID,
+ NL80211_TXQ_ATTR_QUEUE,
+ NL80211_TXQ_ATTR_TXOP,
+ NL80211_TXQ_ATTR_CWMIN,
+ NL80211_TXQ_ATTR_CWMAX,
+ NL80211_TXQ_ATTR_AIFS,
+
+ /* keep last */
+ __NL80211_TXQ_ATTR_AFTER_LAST,
+ NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_txq_q {
+ NL80211_TXQ_Q_VO,
+ NL80211_TXQ_Q_VI,
+ NL80211_TXQ_Q_BE,
+ NL80211_TXQ_Q_BK
+};
+
+enum nl80211_channel_type {
+ NL80211_CHAN_NO_HT,
+ NL80211_CHAN_HT20,
+ NL80211_CHAN_HT40MINUS,
+ NL80211_CHAN_HT40PLUS
+};
+
+/**
+ * enum nl80211_bss - netlink attributes for a BSS
+ *
+ * @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
+ * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
+ * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
+ * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
+ * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
+ * raw information elements from the probe response/beacon (bin);
+ * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
+ * from a Probe Response frame; otherwise they are from a Beacon frame.
+ * However, if the driver does not indicate the source of the IEs, these
+ * IEs may be from either frame subtype.
+ * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
+ * in mBm (100 * dBm) (s32)
+ * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
+ * in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
+ * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
+ * elements from a Beacon frame (bin); not present if no Beacon frame has
+ * yet been received
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
+ */
+enum nl80211_bss {
+ __NL80211_BSS_INVALID,
+ NL80211_BSS_BSSID,
+ NL80211_BSS_FREQUENCY,
+ NL80211_BSS_TSF,
+ NL80211_BSS_BEACON_INTERVAL,
+ NL80211_BSS_CAPABILITY,
+ NL80211_BSS_INFORMATION_ELEMENTS,
+ NL80211_BSS_SIGNAL_MBM,
+ NL80211_BSS_SIGNAL_UNSPEC,
+ NL80211_BSS_STATUS,
+ NL80211_BSS_SEEN_MS_AGO,
+ NL80211_BSS_BEACON_IES,
+
+ /* keep last */
+ __NL80211_BSS_AFTER_LAST,
+ NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_bss_status - BSS "status"
+ * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
+ * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
+ *
+ * The BSS status is a BSS attribute in scan dumps, which
+ * indicates the status the interface has wrt. this BSS.
+ */
+enum nl80211_bss_status {
+ NL80211_BSS_STATUS_AUTHENTICATED,
+ NL80211_BSS_STATUS_ASSOCIATED,
+ NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
+ * enum nl80211_auth_type - AuthenticationType
+ *
+ * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
+ * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
+ * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
+ * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ * trying multiple times); this is invalid in netlink -- leave out
+ * the attribute for this on CONNECT commands.
+ */
+enum nl80211_auth_type {
+ NL80211_AUTHTYPE_OPEN_SYSTEM,
+ NL80211_AUTHTYPE_SHARED_KEY,
+ NL80211_AUTHTYPE_FT,
+ NL80211_AUTHTYPE_NETWORK_EAP,
+
+ /* keep last */
+ __NL80211_AUTHTYPE_NUM,
+ NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+ NL80211_AUTHTYPE_AUTOMATIC
+};
+
+/**
+ * enum nl80211_key_type - Key Type
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ * @NUM_NL80211_KEYTYPES: number of defined key types
+ */
+enum nl80211_key_type {
+ NL80211_KEYTYPE_GROUP,
+ NL80211_KEYTYPE_PAIRWISE,
+ NL80211_KEYTYPE_PEERKEY,
+
+ NUM_NL80211_KEYTYPES
+};
+
+/**
+ * enum nl80211_mfp - Management frame protection state
+ * @NL80211_MFP_NO: Management frame protection not used
+ * @NL80211_MFP_REQUIRED: Management frame protection required
+ */
+enum nl80211_mfp {
+ NL80211_MFP_NO,
+ NL80211_MFP_REQUIRED,
+};
+
+enum nl80211_wpa_versions {
+ NL80211_WPA_VERSION_1 = 1 << 0,
+ NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
+/**
+ * enum nl80211_key_default_types - key default types
+ * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
+ * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
+ * unicast key
+ * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
+ * multicast key
+ * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
+ */
+enum nl80211_key_default_types {
+ __NL80211_KEY_DEFAULT_TYPE_INVALID,
+ NL80211_KEY_DEFAULT_TYPE_UNICAST,
+ NL80211_KEY_DEFAULT_TYPE_MULTICAST,
+
+ NUM_NL80211_KEY_DEFAULT_TYPES
+};
+
+/**
+ * enum nl80211_key_attributes - key attributes
+ * @__NL80211_KEY_INVALID: invalid
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
+ * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ * keys
+ * @NL80211_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ * section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ * CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
+ * specified the default depends on whether a MAC address was
+ * given with the command using the key or not (u32)
+ * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ * attributes, specifying what a key should be set as default as.
+ * See &enum nl80211_key_default_types.
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+enum nl80211_key_attributes {
+ __NL80211_KEY_INVALID,
+ NL80211_KEY_DATA,
+ NL80211_KEY_IDX,
+ NL80211_KEY_CIPHER,
+ NL80211_KEY_SEQ,
+ NL80211_KEY_DEFAULT,
+ NL80211_KEY_DEFAULT_MGMT,
+ NL80211_KEY_TYPE,
+ NL80211_KEY_DEFAULT_TYPES,
+
+ /* keep last */
+ __NL80211_KEY_AFTER_LAST,
+ NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_tx_rate_attributes - TX rate set attributes
+ * @__NL80211_TXRATE_INVALID: invalid
+ * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
+ * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
+ * 1 = 500 kbps) but without the IE length restriction (at most
+ * %NL80211_MAX_SUPP_RATES in a single array).
+ * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
+ * in an array of MCS numbers.
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
+ */
+enum nl80211_tx_rate_attributes {
+ __NL80211_TXRATE_INVALID,
+ NL80211_TXRATE_LEGACY,
+ NL80211_TXRATE_MCS,
+
+ /* keep last */
+ __NL80211_TXRATE_AFTER_LAST,
+ NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band - Frequency band
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
+ */
+enum nl80211_band {
+ NL80211_BAND_2GHZ,
+ NL80211_BAND_5GHZ,
+};
+
+enum nl80211_ps_state {
+ NL80211_PS_DISABLED,
+ NL80211_PS_ENABLED,
+};
+
+/**
+ * enum nl80211_attr_cqm - connection quality monitor attributes
+ * @__NL80211_ATTR_CQM_INVALID: invalid
+ * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
+ * the threshold for the RSSI level at which an event will be sent. Zero
+ * to disable.
+ * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
+ * the minimum amount the RSSI level must change after an event before a
+ * new event may be issued (to reduce effects of RSSI oscillation).
+ * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
+ * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
+ * consecutive packets were not acknowledged by the peer
+ * @__NL80211_ATTR_CQM_AFTER_LAST: internal
+ * @NL80211_ATTR_CQM_MAX: highest key attribute
+ */
+enum nl80211_attr_cqm {
+ __NL80211_ATTR_CQM_INVALID,
+ NL80211_ATTR_CQM_RSSI_THOLD,
+ NL80211_ATTR_CQM_RSSI_HYST,
+ NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
+ NL80211_ATTR_CQM_PKT_LOSS_EVENT,
+
+ /* keep last */
+ __NL80211_ATTR_CQM_AFTER_LAST,
+ NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
+ * configured threshold
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
+ * configured threshold
+ */
+enum nl80211_cqm_rssi_threshold_event {
+ NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+ NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
+};
+
+
+/**
+ * enum nl80211_tx_power_setting - TX power adjustment
+ * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
+ * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
+ * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
+ */
+enum nl80211_tx_power_setting {
+ NL80211_TX_POWER_AUTOMATIC,
+ NL80211_TX_POWER_LIMITED,
+ NL80211_TX_POWER_FIXED,
+};
+
+/**
+ * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+ * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ * a zero bit are ignored
+ * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ * a bit for each byte in the pattern. The lowest-order bit corresponds
+ * to the first byte of the pattern, but the bytes of the pattern are
+ * in a little-endian-like format, i.e. the 9th byte of the pattern
+ * corresponds to the lowest-order bit in the second byte of the mask.
+ * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ * xx indicates "don't care") would be represented by a pattern of
+ * twelve zero bytes, and a mask of "0xed,0x07".
+ * Note that the pattern matching is done as though frames were not
+ * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ * first (including SNAP header unpacking) and then matched.
+ * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+ * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ */
+enum nl80211_wowlan_packet_pattern_attr {
+ __NL80211_WOWLAN_PKTPAT_INVALID,
+ NL80211_WOWLAN_PKTPAT_MASK,
+ NL80211_WOWLAN_PKTPAT_PATTERN,
+
+ NUM_NL80211_WOWLAN_PKTPAT,
+ MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_wowlan_pattern_support - pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_wowlan_pattern_support {
+ __u32 max_patterns;
+ __u32 min_pattern_len;
+ __u32 max_pattern_len;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ * the chip into a special state -- works best with chips that have
+ * support for low-power operation already (flag)
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ * is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ * by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ * which are passed in an array of nested attributes, each nested attribute
+ * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ * Each pattern defines a wakeup packet. The matching is done on the MSDU,
+ * i.e. as though the packet was an 802.3 packet, so the pattern matching
+ * is done after the packet is converted to the MSDU.
+ *
+ * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ * carrying a &struct nl80211_wowlan_pattern_support.
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
+ * used when setting, used only to indicate that GTK rekeying is supported
+ * by the device (flag)
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
+ * done by the device) (flag)
+ * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
+ * packet (flag)
+ * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
+ * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
+ * (on devices that have rfkill in the device) (flag)
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ */
+enum nl80211_wowlan_triggers {
+ __NL80211_WOWLAN_TRIG_INVALID,
+ NL80211_WOWLAN_TRIG_ANY,
+ NL80211_WOWLAN_TRIG_DISCONNECT,
+ NL80211_WOWLAN_TRIG_MAGIC_PKT,
+ NL80211_WOWLAN_TRIG_PKT_PATTERN,
+ NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
+ NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
+ NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
+ NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
+ NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
+
+ /* keep last */
+ NUM_NL80211_WOWLAN_TRIG,
+ MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ * can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ * flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+ NL80211_IFACE_LIMIT_UNSPEC,
+ NL80211_IFACE_LIMIT_MAX,
+ NL80211_IFACE_LIMIT_TYPES,
+
+ /* keep last */
+ NUM_NL80211_IFACE_LIMIT,
+ MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ * for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ * interfaces that can be created in this group. This number doesn't
+ * apply to interfaces purely managed in software, which are listed
+ * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ * beacon intervals within this group must be all the same even for
+ * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ * the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ * different channels may be used within this group.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ * => allows an AP and a STA that must match BIs
+ *
+ * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ * => allows 8 of AP/GO
+ *
+ * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ * => allows two STAs on different channels
+ *
+ * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ * => allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+ NL80211_IFACE_COMB_UNSPEC,
+ NL80211_IFACE_COMB_LIMITS,
+ NL80211_IFACE_COMB_MAXNUM,
+ NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+ NL80211_IFACE_COMB_NUM_CHANNELS,
+
+ /* keep last */
+ NUM_NL80211_IFACE_COMB,
+ MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ * state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ * this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ * from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ * received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ * plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+ NL80211_PLINK_LISTEN,
+ NL80211_PLINK_OPN_SNT,
+ NL80211_PLINK_OPN_RCVD,
+ NL80211_PLINK_CNF_RCVD,
+ NL80211_PLINK_ESTAB,
+ NL80211_PLINK_HOLDING,
+ NL80211_PLINK_BLOCKED,
+
+ /* keep last */
+ NUM_NL80211_PLINK_STATES,
+ MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
+#define NL80211_KCK_LEN 16
+#define NL80211_KEK_LEN 16
+#define NL80211_REPLAY_CTR_LEN 8
+
+/**
+ * enum nl80211_rekey_data - attributes for GTK rekey offload
+ * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
+ * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
+ * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
+ * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
+ * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
+ */
+enum nl80211_rekey_data {
+ __NL80211_REKEY_DATA_INVALID,
+ NL80211_REKEY_DATA_KEK,
+ NL80211_REKEY_DATA_KCK,
+ NL80211_REKEY_DATA_REPLAY_CTR,
+
+ /* keep last */
+ NUM_NL80211_REKEY_DATA,
+ MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
+};
+
+/**
+ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
+ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
+ * Beacon frames)
+ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
+ * in Beacon frames
+ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
+ * element in Beacon frames but zero out each byte in the SSID
+ */
+enum nl80211_hidden_ssid {
+ NL80211_HIDDEN_SSID_NOT_IN_USE,
+ NL80211_HIDDEN_SSID_ZERO_LEN,
+ NL80211_HIDDEN_SSID_ZERO_CONTENTS
+};
+
+/**
+ * enum nl80211_sta_wme_attr - station WME attributes
+ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
+ * is the same as the AC bitmap in the QoS info field.
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
+ * as the MAX_SP field in the QoS info field (but already shifted down).
+ * @__NL80211_STA_WME_AFTER_LAST: internal
+ * @NL80211_STA_WME_MAX: highest station WME attribute
+ */
+enum nl80211_sta_wme_attr {
+ __NL80211_STA_WME_INVALID,
+ NL80211_STA_WME_UAPSD_QUEUES,
+ NL80211_STA_WME_MAX_SP,
+
+ /* keep last */
+ __NL80211_STA_WME_AFTER_LAST,
+ NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
+ * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
+ * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
+ * priority)
+ * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
+ * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
+ * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
+ * (internal)
+ * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
+ * (internal)
+ */
+enum nl80211_pmksa_candidate_attr {
+ __NL80211_PMKSA_CANDIDATE_INVALID,
+ NL80211_PMKSA_CANDIDATE_INDEX,
+ NL80211_PMKSA_CANDIDATE_BSSID,
+ NL80211_PMKSA_CANDIDATE_PREAUTH,
+
+ /* keep last */
+ NUM_NL80211_PMKSA_CANDIDATE,
+ MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
+};
+
+/**
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
+ * @NL80211_TDLS_SETUP: Setup TDLS link
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
+ */
+enum nl80211_tdls_operation {
+ NL80211_TDLS_DISCOVERY_REQ,
+ NL80211_TDLS_SETUP,
+ NL80211_TDLS_TEARDOWN,
+ NL80211_TDLS_ENABLE_LINK,
+ NL80211_TDLS_DISABLE_LINK,
+};
+
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
+/**
+ * enum nl80211_feature_flags - device/driver features
+ * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
+ * TX status to the socket error queue when requested with the
+ * socket option.
+ * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
+ */
+enum nl80211_feature_flags {
+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+ NL80211_FEATURE_HT_IBSS = 1 << 1,
+};
+
+/**
+ * enum nl80211_probe_resp_offload_support_attr - optional supported
+ * protocols for probe-response offloading by the driver/FW.
+ * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
+ * Each enum value represents a bit in the bitmap of supported
+ * protocols. Typically a subset of probe-requests belonging to a
+ * supported protocol will be excluded from offload and uploaded
+ * to the host.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
+ */
+enum nl80211_probe_resp_offload_support_attr {
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3,
+};
+
+#endif /* __LINUX_NL80211_H */
diff --git a/package/iwinfo/src/include/iwinfo/api/wext.h b/package/iwinfo/src/include/iwinfo/api/wext.h
new file mode 100644
index 000000000..6b5838e1b
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/api/wext.h
@@ -0,0 +1,1139 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version : 22 16.3.07
+ *
+ * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _LINUX_WIRELESS_H
+#define _LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands. This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ * # net/core/dev.c (two place + add include)
+ * # net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ * # net/core/dev.c (two other places)
+ * # include/linux/netdevice.h (one place)
+ * # include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ * # include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ * # net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ * # net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+/* This header is used in user-space, therefore need to be sanitised
+ * for that purpose. Those includes are usually not compatible with glibc.
+ * To know which includes to use in user-space, check iwlib.h. */
+#ifdef __KERNEL__
+#include <linux/types.h> /* for "caddr_t" et al */
+#include <linux/socket.h> /* for "struct sockaddr" et al */
+#include <linux/if.h> /* for IFNAMSIZ and co... */
+#endif /* __KERNEL__ */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT 22
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ * Alan Cox start some incompatibles changes. I've integrated a bit more.
+ * - Encryption renamed to Encode to avoid US regulation problems
+ * - Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ * - Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ * - Missing encoding definitions in range
+ * - Access points stuff
+ *
+ * V5 to V6
+ * --------
+ * - 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ * - define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ * - Changed my e-mail address
+ * - More 802.11 support (nickname, rate, rts, frag)
+ * - List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ * - Support for 'mode of operation' (ad-hoc, managed...)
+ * - Support for unicast and multicast power saving
+ * - Change encoding to support larger tokens (>64 bits)
+ * - Updated iw_params (disable, flags) and use it for NWID
+ * - Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ * - Add PM capability to range structure
+ * - Add PM modifier : MAX/MIN/RELATIVE
+ * - Add encoding option : IW_ENCODE_NOKEY
+ * - Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ * - Add WE version in range (help backward/forward compatibility)
+ * - Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ * - Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ * - Add new statistics (frag, retry, beacon)
+ * - Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ * - Document creation of new driver API.
+ * - Extract union iwreq_data from struct iwreq (for new driver API).
+ * - Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ * - Wireless Events support : define struct iw_event
+ * - Define additional specific event numbers
+ * - Add "addr" and "param" fields in union iwreq_data
+ * - AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ * - Make struct iw_freq signed (both m & e), add explicit padding
+ * - Add IWEVCUSTOM for driver specific event/scanning token
+ * - Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ * - Add IW_TXPOW_RANGE for range of Tx Powers
+ * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ * - Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ * - Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ * - Reshuffle struct iw_range for increases, add filler
+ * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ * - Add flags to frequency -> auto/fixed
+ * - Document (struct iw_quality *)->updated, add new flags (INVALID)
+ * - Wireless Event capability in struct iw_range
+ * - Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>)
+ * ----------
+ * - Add support for WPA/WPA2
+ * - Add extended encoding configuration (SIOCSIWENCODEEXT and
+ * SIOCGIWENCODEEXT)
+ * - Add SIOCSIWGENIE/SIOCGIWGENIE
+ * - Add SIOCSIWMLME
+ * - Add SIOCSIWPMKSA
+ * - Add struct iw_range bit field for supported encoding capabilities
+ * - Add optional scan request parameters for SIOCSIWSCAN
+ * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ * related parameters (extensible up to 4096 parameter values)
+ * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
+ *
+ * V18 to V19
+ * ----------
+ * - Remove (struct iw_point *)->pointer from events and streams
+ * - Remove header includes to help user space
+ * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64
+ * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
+ * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
+ * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
+ *
+ * V19 to V20
+ * ----------
+ * - RtNetlink requests support (SET/GET)
+ *
+ * V20 to V21
+ * ----------
+ * - Remove (struct net_device *)->get_wireless_stats()
+ * - Change length in ESSID and NICK to strlen() instead of strlen()+1
+ * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
+ * - Power/Retry relative values no longer * 100000
+ * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ * - Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */
+#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */
+#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */
+#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */
+#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */
+#define SIOCSIWMODE 0x8B06 /* set operation mode */
+#define SIOCGIWMODE 0x8B07 /* get operation mode */
+#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */
+#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE 0x8B0A /* Unused */
+#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */
+#define SIOCSIWPRIV 0x8B0C /* Unused */
+#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */
+#define SIOCSIWSTATS 0x8B0E /* Unused */
+#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY 0x8B10 /* set spy addresses */
+#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */
+#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */
+#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */
+#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */
+#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */
+#define SIOCGIWSCAN 0x8B19 /* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */
+#define SIOCGIWESSID 0x8B1B /* get ESSID */
+#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */
+#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */
+#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */
+#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */
+#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */
+#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */
+#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */
+#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */
+#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */
+/* Modulation bitmask */
+#define SIOCSIWMODUL 0x8B2E /* set Modulations settings */
+#define SIOCGIWMODUL 0x8B2F /* get Modulations settings */
+
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE 0x8B30 /* set generic IE */
+#define SIOCGIWGENIE 0x8B31 /* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses
+ * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */
+#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV 0x8BE0
+#define SIOCIWLASTPRIV 0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'even' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST 0x8B00
+#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */
+#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST)
+
+/* Odd : get (world access), even : set (root access) */
+#define IW_IS_SET(cmd) (!((cmd) & 0x1))
+#define IW_IS_GET(cmd) ((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */
+#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */
+#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */
+#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */
+#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */
+#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..)
+ * (scan results); This includes id and
+ * length fields. One IWEVGENIE may
+ * contain more than one IE. Scan
+ * results may contain one or more
+ * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure
+ * (struct iw_michaelmicfailure)
+ */
+#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request.
+ * The data includes id and length
+ * fields and may contain more than one
+ * IE. This event is required in
+ * Managed mode if the driver
+ * generates its own WPA/RSN IE. This
+ * should be sent just before
+ * IWEVREGISTERED event for the
+ * association. */
+#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association
+ * Response. The data includes id and
+ * length fields and may contain more
+ * than one IE. This may be sent
+ * between IWEVASSOCREQIE and
+ * IWEVREGISTERED events for the
+ * association. */
+#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN
+ * pre-authentication
+ * (struct iw_pmkid_cand) */
+
+#define IWEVFIRST 0x8C00
+#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST)
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */
+#define IW_PRIV_TYPE_NONE 0x0000
+#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */
+#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */
+#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES 32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES 32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER 8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY 8
+
+/* Maximum of address that you may get in the
+ list of access points in range */
+#define IW_MAX_AP 64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE 32
+
+/* Modes of operation */
+#define IW_MODE_AUTO 0 /* Let the driver decides */
+#define IW_MODE_ADHOC 1 /* Single cell network */
+#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED 0x02
+#define IW_QUAL_NOISE_UPDATED 0x04
+#define IW_QUAL_ALL_UPDATED 0x07
+#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */
+#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID 0x20
+#define IW_QUAL_NOISE_INVALID 0x40
+#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */
+#define IW_QUAL_ALL_INVALID 0x70
+
+/* Frequency flags */
+#define IW_FREQ_AUTO 0x00 /* Let the driver decides */
+#define IW_FREQ_FIXED 0x01 /* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES 8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */
+#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */
+#define IW_ENCODE_MODE 0xF000 /* Modes defined below */
+#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */
+#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */
+#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */
+#define IW_ENCODE_TEMP 0x0400 /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON 0x0000 /* No details... */
+#define IW_POWER_TYPE 0xF000 /* Type of parameter */
+#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */
+#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */
+#define IW_POWER_SAVING 0x4000 /* Value is relative (how aggressive)*/
+#define IW_POWER_MODE 0x0F00 /* Power Management mode */
+#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */
+#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */
+#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */
+#define IW_POWER_MIN 0x0001 /* Value is a minimum */
+#define IW_POWER_MAX 0x0002 /* Value is a maximum */
+#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE 0x00FF /* Type of value */
+#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */
+#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */
+#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */
+#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON 0x0000 /* No details... */
+#define IW_RETRY_TYPE 0xF000 /* Type of parameter */
+#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/
+#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */
+#define IW_RETRY_MIN 0x0001 /* Value is a minimum */
+#define IW_RETRY_MAX 0x0002 /* Value is a maximum */
+#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
+#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */
+#define IW_RETRY_LONG 0x0020 /* Value is for long packets */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */
+#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */
+#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA 4096 /* In bytes */
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX 256 /* In bytes */
+
+/* Generic information element */
+#define IW_GENERIC_IE_MAX 1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH 0
+#define IW_MLME_DISASSOC 1
+#define IW_MLME_AUTH 2
+#define IW_MLME_ASSOC 3
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX 0x0FFF
+#define IW_AUTH_FLAGS 0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION 0
+#define IW_AUTH_CIPHER_PAIRWISE 1
+#define IW_AUTH_CIPHER_GROUP 2
+#define IW_AUTH_KEY_MGMT 3
+#define IW_AUTH_TKIP_COUNTERMEASURES 4
+#define IW_AUTH_DROP_UNENCRYPTED 5
+#define IW_AUTH_80211_AUTH_ALG 6
+#define IW_AUTH_WPA_ENABLED 7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8
+#define IW_AUTH_ROAMING_CONTROL 9
+#define IW_AUTH_PRIVACY_INVOKED 10
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001
+#define IW_AUTH_WPA_VERSION_WPA 0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2 0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
+#define IW_AUTH_CIPHER_NONE 0x00000001
+#define IW_AUTH_CIPHER_WEP40 0x00000002
+#define IW_AUTH_CIPHER_TKIP 0x00000004
+#define IW_AUTH_CIPHER_CCMP 0x00000008
+#define IW_AUTH_CIPHER_WEP104 0x00000010
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X 1
+#define IW_AUTH_KEY_MGMT_PSK 2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001
+#define IW_AUTH_ALG_SHARED_KEY 0x00000002
+#define IW_AUTH_ALG_LEAP 0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming
+ * control */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE 8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE 0
+#define IW_ENCODE_ALG_WEP 1
+#define IW_ENCODE_ALG_TKIP 2
+#define IW_ENCODE_ALG_CCMP 3
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY 0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP 0x00000004
+#define IW_MICFAILURE_PAIRWISE 0x00000008
+#define IW_MICFAILURE_STAKEY 0x00000010
+#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported)
+ */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA 0x00000001
+#define IW_ENC_CAPA_WPA2 0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \
+ (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+ (cmd - SIOCSIWCOMMIT))
+#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \
+ IW_EVENT_CAPA_MASK(0x8B06) | \
+ IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+/* Modulations bitmasks */
+#define IW_MODUL_ALL 0x00000000 /* Everything supported */
+#define IW_MODUL_FH 0x00000001 /* Frequency Hopping */
+#define IW_MODUL_DS 0x00000002 /* Original Direct Sequence */
+#define IW_MODUL_CCK 0x00000004 /* 802.11b : 5.5 + 11 Mb/s */
+#define IW_MODUL_11B (IW_MODUL_DS | IW_MODUL_CCK)
+#define IW_MODUL_PBCC 0x00000008 /* TI : 5.5 + 11 + 22 Mb/s */
+#define IW_MODUL_OFDM_A 0x00000010 /* 802.11a : 54 Mb/s */
+#define IW_MODUL_11A (IW_MODUL_OFDM_A)
+#define IW_MODUL_11AB (IW_MODUL_11B | IW_MODUL_11A)
+#define IW_MODUL_OFDM_G 0x00000020 /* 802.11g : 54 Mb/s */
+#define IW_MODUL_11G (IW_MODUL_11B | IW_MODUL_OFDM_G)
+#define IW_MODUL_11AG (IW_MODUL_11G | IW_MODUL_11A)
+#define IW_MODUL_TURBO 0x00000040 /* ATH : bonding, 108 Mb/s */
+/* In here we should define MIMO stuff. Later... */
+#define IW_MODUL_CUSTOM 0x40000000 /* Driver specific */
+
+/* Bitrate flags available */
+#define IW_BITRATE_TYPE 0x00FF /* Type of value */
+#define IW_BITRATE_UNICAST 0x0001 /* Maximum/Fixed unicast bitrate */
+#define IW_BITRATE_BROADCAST 0x0002 /* Fixed broadcast bitrate */
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ * Generic format for most parameters that fit in an int
+ */
+struct iw_param
+{
+ int32_t value; /* The value of the parameter itself */
+ uint8_t fixed; /* Hardware should not use auto select */
+ uint8_t disabled; /* Disable the feature */
+ uint16_t flags; /* Various specifc flags (if any) */
+};
+
+/*
+ * For all data larger than 16 octets, we need to use a
+ * pointer to memory allocated in user space.
+ */
+struct iw_point
+{
+ void *pointer; /* Pointer to the data (in user space) */
+ uint16_t length; /* number of fields or size in bytes */
+ uint16_t flags; /* Optional params */
+};
+
+/*
+ * A frequency
+ * For numbers lower than 10^9, we encode the number in 'm' and
+ * set 'e' to 0
+ * For number greater than 10^9, we divide it by the lowest power
+ * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ * The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct iw_freq
+{
+ int32_t m; /* Mantissa */
+ int16_t e; /* Exponent */
+ uint8_t i; /* List index (when in range struct) */
+ uint8_t flags; /* Flags (fixed/auto) */
+};
+
+/*
+ * Quality of the link
+ */
+struct iw_quality
+{
+ uint8_t qual; /* link quality (%retries, SNR,
+ %missed beacons or better...) */
+ uint8_t level; /* signal level (dBm) */
+ uint8_t noise; /* noise level (dBm) */
+ uint8_t updated; /* Flags to know if updated */
+};
+
+/*
+ * Packet discarded in the wireless adapter due to
+ * "wireless" specific problems...
+ * Note : the list of counter and statistics in net_device_stats
+ * is already pretty exhaustive, and you should use that first.
+ * This is only additional stats...
+ */
+struct iw_discarded
+{
+ uint32_t nwid; /* Rx : Wrong nwid/essid */
+ uint32_t code; /* Rx : Unable to code/decode (WEP) */
+ uint32_t fragment; /* Rx : Can't perform MAC reassembly */
+ uint32_t retries; /* Tx : Max MAC retries num reached */
+ uint32_t misc; /* Others cases */
+};
+
+/*
+ * Packet/Time period missed in the wireless adapter due to
+ * "wireless" specific problems...
+ */
+struct iw_missed
+{
+ uint32_t beacon; /* Missed beacons/superframe */
+};
+
+/*
+ * Quality range (for spy threshold)
+ */
+struct iw_thrspy
+{
+ struct sockaddr addr; /* Source address (hw/mac) */
+ struct iw_quality qual; /* Quality of the link */
+ struct iw_quality low; /* Low threshold */
+ struct iw_quality high; /* High threshold */
+};
+
+/*
+ * Optional data for scan request
+ *
+ * Note: these optional parameters are controlling parameters for the
+ * scanning behavior, these do not apply to getting scan results
+ * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ * provide a merged results with all BSSes even if the previous scan
+ * request limited scanning to a subset, e.g., by specifying an SSID.
+ * Especially, scan results are required to include an entry for the
+ * current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct iw_scan_req
+{
+ uint8_t scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+ uint8_t essid_len;
+ uint8_t num_channels; /* num entries in channel_list;
+ * 0 = scan all allowed channels */
+ uint8_t flags; /* reserved as padding; use zero, this may
+ * be used in the future for adding flags
+ * to request different scan behavior */
+ struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+ * individual address of a specific BSS */
+
+ /*
+ * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+ * the current ESSID. This allows scan requests for specific ESSID
+ * without having to change the current ESSID and potentially breaking
+ * the current association.
+ */
+ uint8_t essid[IW_ESSID_MAX_SIZE];
+
+ /*
+ * Optional parameters for changing the default scanning behavior.
+ * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+ * TU is 1.024 ms. If these are set to 0, driver is expected to use
+ * reasonable default values. min_channel_time defines the time that
+ * will be used to wait for the first reply on each channel. If no
+ * replies are received, next channel will be scanned after this. If
+ * replies are received, total time waited on the channel is defined by
+ * max_channel_time.
+ */
+ uint32_t min_channel_time; /* in TU */
+ uint32_t max_channel_time; /* in TU */
+
+ struct iw_freq channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ * Extended data structure for get/set encoding (this is used with
+ * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ * only the data contents changes (key data -> this structure, including
+ * key data).
+ *
+ * If the new key is the first group key, it will be set as the default
+ * TX key. Otherwise, default TX key index is only changed if
+ * IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ * Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ * special "change TX key index" operation which is indicated by setting
+ * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ * tx_seq/rx_seq are only used when respective
+ * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ * used only by an Authenticator (AP or an IBSS station) to get the
+ * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ * debugging/testing.
+ */
+struct iw_encode_ext
+{
+ uint32_t ext_flags; /* IW_ENCODE_EXT_* */
+ uint8_t tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+ uint8_t rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+ struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+ * (group) keys or unicast address for
+ * individual keys */
+ uint16_t alg; /* IW_ENCODE_ALG_* */
+ uint16_t key_len;
+ uint8_t key[1];
+};
+
+/* SIOCSIWMLME data */
+struct iw_mlme
+{
+ uint16_t cmd; /* IW_MLME_* */
+ uint16_t reason_code;
+ struct sockaddr addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD 1
+#define IW_PMKSA_REMOVE 2
+#define IW_PMKSA_FLUSH 3
+
+#define IW_PMKID_LEN 16
+
+struct iw_pmksa
+{
+ uint32_t cmd; /* IW_PMKSA_* */
+ struct sockaddr bssid;
+ uint8_t pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct iw_michaelmicfailure
+{
+ uint32_t flags;
+ struct sockaddr src_addr;
+ uint8_t tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */
+struct iw_pmkid_cand
+{
+ uint32_t flags; /* IW_PMKID_CAND_* */
+ uint32_t index; /* the smaller the index, the higher the
+ * priority */
+ struct sockaddr bssid;
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct iw_statistics
+{
+ uint16_t status; /* Status
+ * - device dependent for now */
+
+ struct iw_quality qual; /* Quality of the link
+ * (instant/mean/max) */
+ struct iw_discarded discard; /* Packet discarded counts */
+ struct iw_missed miss; /* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union iwreq_data
+{
+ /* Config - generic */
+ char name[16];
+ /* Name : used to verify the presence of wireless extensions.
+ * Name of the protocol/provider... */
+
+ struct iw_point essid; /* Extended network name */
+ struct iw_param nwid; /* network id (or domain - the cell) */
+ struct iw_freq freq; /* frequency or channel :
+ * 0-1000 = channel
+ * > 1000 = frequency in Hz */
+
+ struct iw_param sens; /* signal level threshold */
+ struct iw_param bitrate; /* default bit rate */
+ struct iw_param txpower; /* default transmit power */
+ struct iw_param rts; /* RTS threshold threshold */
+ struct iw_param frag; /* Fragmentation threshold */
+ uint32_t mode; /* Operation mode */
+ struct iw_param retry; /* Retry limits & lifetime */
+
+ struct iw_point encoding; /* Encoding stuff : tokens */
+ struct iw_param power; /* PM duration/timeout */
+ struct iw_quality qual; /* Quality part of statistics */
+
+ struct sockaddr ap_addr; /* Access point address */
+ struct sockaddr addr; /* Destination address (hw/mac) */
+
+ struct iw_param param; /* Other small parameters */
+ struct iw_point data; /* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct iwreq
+{
+ union
+ {
+ char ifrn_name[16]; /* if name, e.g. "eth0" */
+ } ifr_ifrn;
+
+ /* Data part (defined just above) */
+ union iwreq_data u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ * For those ioctl which want to exchange mode data that what could
+ * fit in the above structure...
+ */
+
+/*
+ * Range of parameters
+ */
+
+struct iw_range
+{
+ /* Informative stuff (to choose between different interface) */
+ uint32_t throughput; /* To give an idea... */
+ /* In theory this value should be the maximum benchmarked
+ * TCP/IP throughput, because with most of these devices the
+ * bit rate is meaningless (overhead an co) to estimate how
+ * fast the connection will go and pick the fastest one.
+ * I suggest people to play with Netperf or any benchmark...
+ */
+
+ /* NWID (or domain id) */
+ uint32_t min_nwid; /* Minimal NWID we are able to set */
+ uint32_t max_nwid; /* Maximal NWID we are able to set */
+
+ /* Old Frequency (backward compat - moved lower ) */
+ uint16_t old_num_channels;
+ uint8_t old_num_frequency;
+
+ /* Wireless event capability bitmasks */
+ uint32_t event_capa[6];
+
+ /* signal level threshold range */
+ int32_t sensitivity;
+
+ /* Quality of link & SNR stuff */
+ /* Quality range (link, level, noise)
+ * If the quality is absolute, it will be in the range [0 ; max_qual],
+ * if the quality is dBm, it will be in the range [max_qual ; 0].
+ * Don't forget that we use 8 bit arithmetics... */
+ struct iw_quality max_qual; /* Quality of the link */
+ /* This should contain the average/typical values of the quality
+ * indicator. This should be the threshold between a "good" and
+ * a "bad" link (example : monitor going from green to orange).
+ * Currently, user space apps like quality monitors don't have any
+ * way to calibrate the measurement. With this, they can split
+ * the range between 0 and max_qual in different quality level
+ * (using a geometric subdivision centered on the average).
+ * I expect that people doing the user space apps will feedback
+ * us on which value we need to put in each driver... */
+ struct iw_quality avg_qual; /* Quality of the link */
+
+ /* Rates */
+ uint8_t num_bitrates; /* Number of entries in the list */
+ int32_t bitrate[IW_MAX_BITRATES]; /* list, in bps */
+
+ /* RTS threshold */
+ int32_t min_rts; /* Minimal RTS threshold */
+ int32_t max_rts; /* Maximal RTS threshold */
+
+ /* Frag threshold */
+ int32_t min_frag; /* Minimal frag threshold */
+ int32_t max_frag; /* Maximal frag threshold */
+
+ /* Power Management duration & timeout */
+ int32_t min_pmp; /* Minimal PM period */
+ int32_t max_pmp; /* Maximal PM period */
+ int32_t min_pmt; /* Minimal PM timeout */
+ int32_t max_pmt; /* Maximal PM timeout */
+ uint16_t pmp_flags; /* How to decode max/min PM period */
+ uint16_t pmt_flags; /* How to decode max/min PM timeout */
+ uint16_t pm_capa; /* What PM options are supported */
+
+ /* Encoder stuff */
+ uint16_t encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */
+ uint8_t num_encoding_sizes; /* Number of entry in the list */
+ uint8_t max_encoding_tokens; /* Max number of tokens */
+ /* For drivers that need a "login/passwd" form */
+ uint8_t encoding_login_index; /* token index for login token */
+
+ /* Transmit power */
+ uint16_t txpower_capa; /* What options are supported */
+ uint8_t num_txpower; /* Number of entries in the list */
+ int32_t txpower[IW_MAX_TXPOWER]; /* list, in bps */
+
+ /* Wireless Extension version info */
+ uint8_t we_version_compiled; /* Must be WIRELESS_EXT */
+ uint8_t we_version_source; /* Last update of source */
+
+ /* Retry limits and lifetime */
+ uint16_t retry_capa; /* What retry options are supported */
+ uint16_t retry_flags; /* How to decode max/min retry limit */
+ uint16_t r_time_flags; /* How to decode max/min retry life */
+ int32_t min_retry; /* Minimal number of retries */
+ int32_t max_retry; /* Maximal number of retries */
+ int32_t min_r_time; /* Minimal retry lifetime */
+ int32_t max_r_time; /* Maximal retry lifetime */
+
+ /* Frequency */
+ uint16_t num_channels; /* Number of channels [0; num - 1] */
+ uint8_t num_frequency; /* Number of entry in the list */
+ struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */
+ /* Note : this frequency list doesn't need to fit channel numbers,
+ * because each entry contain its channel index */
+
+ uint32_t enc_capa; /* IW_ENC_CAPA_* bit field */
+
+ /* More power management stuff */
+ int32_t min_pms; /* Minimal PM saving */
+ int32_t max_pms; /* Maximal PM saving */
+ uint16_t pms_flags; /* How to decode max/min PM saving */
+
+ /* All available modulations for driver (hw may support less) */
+ int32_t modul_capa; /* IW_MODUL_* bit field */
+
+ /* More bitrate stuff */
+ uint32_t bitrate_capa; /* Types of bitrates supported */
+};
+
+/*
+ * Private ioctl interface information
+ */
+
+struct iw_priv_args
+{
+ uint32_t cmd; /* Number of the ioctl to issue */
+ uint16_t set_args; /* Type and number of args */
+ uint16_t get_args; /* Type and number of args */
+ char name[16]; /* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+ uint16_t len; /* Real lenght of this stuff */
+ uint16_t cmd; /* Wireless IOCTL */
+ union iwreq_data u; /* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(uint32_t))
+#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* iw_point events are special. First, the payload (extra data) come at
+ * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
+ * we omit the pointer, so start at an offset. */
+#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
+ (char *) NULL)
+#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \
+ IW_EV_POINT_OFF)
+
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN (4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(uint32_t))
+#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4)
+
+#endif /* _LINUX_WIRELESS_H */
diff --git a/package/iwinfo/src/include/iwinfo/lua.h b/package/iwinfo/src/include/iwinfo/lua.h
new file mode 100644
index 000000000..d976c0cf4
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/lua.h
@@ -0,0 +1,80 @@
+/*
+ * iwinfo - Wireless Information Library - Lua Headers
+ *
+ * Copyright (C) 2009 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ * The iwinfo library is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * The iwinfo library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the iwinfo library. If not, see http://www.gnu.org/licenses/.
+ */
+
+#ifndef __IWINFO_LUALUB_H_
+#define __IWINFO_LUALIB_H_
+
+#include <lua.h>
+#include <lualib.h>
+#include <lauxlib.h>
+
+#include "iwinfo.h"
+#include "iwinfo/wext_scan.h"
+
+
+#define IWINFO_META "iwinfo"
+#define IWINFO_WEXT_META "iwinfo.wext"
+
+#ifdef USE_WL
+#define IWINFO_WL_META "iwinfo.wl"
+#endif
+
+#ifdef USE_MADWIFI
+#define IWINFO_MADWIFI_META "iwinfo.madwifi"
+#endif
+
+#ifdef USE_NL80211
+#define IWINFO_NL80211_META "iwinfo.nl80211"
+#endif
+
+
+#define LUA_REG(type,op) \
+ { #op, iwinfo_L_##type##_##op }
+
+#define LUA_WRAP_INT(type,op) \
+ static int iwinfo_L_##type##_##op(lua_State *L) \
+ { \
+ const char *ifname = luaL_checkstring(L, 1); \
+ int rv; \
+ if( !type##_get_##op(ifname, &rv) ) \
+ lua_pushnumber(L, rv); \
+ else \
+ lua_pushnil(L); \
+ return 1; \
+ }
+
+#define LUA_WRAP_STRING(type,op) \
+ static int iwinfo_L_##type##_##op(lua_State *L) \
+ { \
+ const char *ifname = luaL_checkstring(L, 1); \
+ char rv[IWINFO_BUFSIZE]; \
+ memset(rv, 0, IWINFO_BUFSIZE); \
+ if( !type##_get_##op(ifname, rv) ) \
+ lua_pushstring(L, rv); \
+ else \
+ lua_pushnil(L); \
+ return 1; \
+ }
+
+#define LUA_WRAP_STRUCT(type,op) \
+ static int iwinfo_L_##type##_##op(lua_State *L) \
+ { \
+ return iwinfo_L_##op(L, type##_get_##op); \
+ }
+
+#endif
diff --git a/package/iwinfo/src/include/iwinfo/madwifi.h b/package/iwinfo/src/include/iwinfo/madwifi.h
new file mode 100644
index 000000000..14d81352b
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/madwifi.h
@@ -0,0 +1,83 @@
+/*
+ * iwinfo - Wireless Information Library - Madwifi Headers
+ *
+ * Copyright (C) 2009 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ * The iwinfo library is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * The iwinfo library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the iwinfo library. If not, see http://www.gnu.org/licenses/.
+ */
+
+#ifndef __IWINFO_MADWIFI_H_
+#define __IWINFO_MADWIFI_H_
+
+#include <fcntl.h>
+
+#include "iwinfo.h"
+#include "iwinfo/utils.h"
+#include "iwinfo/api/madwifi.h"
+
+int madwifi_probe(const char *ifname);
+int madwifi_get_mode(const char *ifname, int *buf);
+int madwifi_get_ssid(const char *ifname, char *buf);
+int madwifi_get_bssid(const char *ifname, char *buf);
+int madwifi_get_country(const char *ifname, char *buf);
+int madwifi_get_channel(const char *ifname, int *buf);
+int madwifi_get_frequency(const char *ifname, int *buf);
+int madwifi_get_frequency_offset(const char *ifname, int *buf);
+int madwifi_get_txpower(const char *ifname, int *buf);
+int madwifi_get_txpower_offset(const char *ifname, int *buf);
+int madwifi_get_bitrate(const char *ifname, int *buf);
+int madwifi_get_signal(const char *ifname, int *buf);
+int madwifi_get_noise(const char *ifname, int *buf);
+int madwifi_get_quality(const char *ifname, int *buf);
+int madwifi_get_quality_max(const char *ifname, int *buf);
+int madwifi_get_encryption(const char *ifname, char *buf);
+int madwifi_get_assoclist(const char *ifname, char *buf, int *len);
+int madwifi_get_txpwrlist(const char *ifname, char *buf, int *len);
+int madwifi_get_scanlist(const char *ifname, char *buf, int *len);
+int madwifi_get_freqlist(const char *ifname, char *buf, int *len);
+int madwifi_get_countrylist(const char *ifname, char *buf, int *len);
+int madwifi_get_hwmodelist(const char *ifname, int *buf);
+int madwifi_get_mbssid_support(const char *ifname, int *buf);
+int madwifi_get_hardware_id(const char *ifname, char *buf);
+int madwifi_get_hardware_name(const char *ifname, char *buf);
+void madwifi_close(void);
+
+static const struct iwinfo_ops madwifi_ops = {
+ .channel = madwifi_get_channel,
+ .frequency = madwifi_get_frequency,
+ .frequency_offset = madwifi_get_frequency_offset,
+ .txpower = madwifi_get_txpower,
+ .txpower_offset = madwifi_get_txpower_offset,
+ .bitrate = madwifi_get_bitrate,
+ .signal = madwifi_get_signal,
+ .noise = madwifi_get_noise,
+ .quality = madwifi_get_quality,
+ .quality_max = madwifi_get_quality_max,
+ .mbssid_support = madwifi_get_mbssid_support,
+ .hwmodelist = madwifi_get_hwmodelist,
+ .mode = madwifi_get_mode,
+ .ssid = madwifi_get_ssid,
+ .bssid = madwifi_get_bssid,
+ .country = madwifi_get_country,
+ .hardware_id = madwifi_get_hardware_id,
+ .hardware_name = madwifi_get_hardware_name,
+ .encryption = madwifi_get_encryption,
+ .assoclist = madwifi_get_assoclist,
+ .txpwrlist = madwifi_get_txpwrlist,
+ .scanlist = madwifi_get_scanlist,
+ .freqlist = madwifi_get_freqlist,
+ .countrylist = madwifi_get_countrylist,
+ .close = madwifi_close
+};
+
+#endif
diff --git a/package/iwinfo/src/include/iwinfo/nl80211.h b/package/iwinfo/src/include/iwinfo/nl80211.h
new file mode 100644
index 000000000..28545141d
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/nl80211.h
@@ -0,0 +1,125 @@
+/*
+ * iwinfo - Wireless Information Library - NL80211 Headers
+ *
+ * Copyright (C) 2010 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ * The iwinfo library is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * The iwinfo library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the iwinfo library. If not, see http://www.gnu.org/licenses/.
+ */
+
+#ifndef __IWINFO_NL80211_H_
+#define __IWINFO_NL80211_H_
+
+#include <errno.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <string.h>
+#include <dirent.h>
+#include <signal.h>
+#include <sys/un.h>
+#include <netlink/netlink.h>
+#include <netlink/genl/genl.h>
+#include <netlink/genl/family.h>
+#include <netlink/genl/ctrl.h>
+
+#include "iwinfo.h"
+#include "iwinfo/utils.h"
+#include "iwinfo/api/nl80211.h"
+
+struct nl80211_state {
+ struct nl_sock *nl_sock;
+ struct nl_cache *nl_cache;
+ struct genl_family *nl80211;
+ struct genl_family *nlctrl;
+};
+
+struct nl80211_msg_conveyor {
+ struct nl_msg *msg;
+ struct nl_cb *cb;
+};
+
+struct nl80211_event_conveyor {
+ int wait;
+ int recv;
+};
+
+struct nl80211_group_conveyor {
+ const char *name;
+ int id;
+};
+
+struct nl80211_rssi_rate {
+ int16_t rate;
+ int8_t rssi;
+};
+
+struct nl80211_array_buf {
+ void *buf;
+ int count;
+};
+
+int nl80211_probe(const char *ifname);
+int nl80211_get_mode(const char *ifname, int *buf);
+int nl80211_get_ssid(const char *ifname, char *buf);
+int nl80211_get_bssid(const char *ifname, char *buf);
+int nl80211_get_country(const char *ifname, char *buf);
+int nl80211_get_channel(const char *ifname, int *buf);
+int nl80211_get_frequency(const char *ifname, int *buf);
+int nl80211_get_frequency_offset(const char *ifname, int *buf);
+int nl80211_get_txpower(const char *ifname, int *buf);
+int nl80211_get_txpower_offset(const char *ifname, int *buf);
+int nl80211_get_bitrate(const char *ifname, int *buf);
+int nl80211_get_signal(const char *ifname, int *buf);
+int nl80211_get_noise(const char *ifname, int *buf);
+int nl80211_get_quality(const char *ifname, int *buf);
+int nl80211_get_quality_max(const char *ifname, int *buf);
+int nl80211_get_encryption(const char *ifname, char *buf);
+int nl80211_get_assoclist(const char *ifname, char *buf, int *len);
+int nl80211_get_txpwrlist(const char *ifname, char *buf, int *len);
+int nl80211_get_scanlist(const char *ifname, char *buf, int *len);
+int nl80211_get_freqlist(const char *ifname, char *buf, int *len);
+int nl80211_get_countrylist(const char *ifname, char *buf, int *len);
+int nl80211_get_hwmodelist(const char *ifname, int *buf);
+int nl80211_get_mbssid_support(const char *ifname, int *buf);
+int nl80211_get_hardware_id(const char *ifname, char *buf);
+int nl80211_get_hardware_name(const char *ifname, char *buf);
+void nl80211_close(void);
+
+static const struct iwinfo_ops nl80211_ops = {
+ .channel = nl80211_get_channel,
+ .frequency = nl80211_get_frequency,
+ .frequency_offset = nl80211_get_frequency_offset,
+ .txpower = nl80211_get_txpower,
+ .txpower_offset = nl80211_get_txpower_offset,
+ .bitrate = nl80211_get_bitrate,
+ .signal = nl80211_get_signal,
+ .noise = nl80211_get_noise,
+ .quality = nl80211_get_quality,
+ .quality_max = nl80211_get_quality_max,
+ .mbssid_support = nl80211_get_mbssid_support,
+ .hwmodelist = nl80211_get_hwmodelist,
+ .mode = nl80211_get_mode,
+ .ssid = nl80211_get_ssid,
+ .bssid = nl80211_get_bssid,
+ .country = nl80211_get_country,
+ .hardware_id = nl80211_get_hardware_id,
+ .hardware_name = nl80211_get_hardware_name,
+ .encryption = nl80211_get_encryption,
+ .assoclist = nl80211_get_assoclist,
+ .txpwrlist = nl80211_get_txpwrlist,
+ .scanlist = nl80211_get_scanlist,
+ .freqlist = nl80211_get_freqlist,
+ .countrylist = nl80211_get_countrylist,
+ .close = nl80211_close
+};
+
+#endif
diff --git a/package/iwinfo/src/include/iwinfo/utils.h b/package/iwinfo/src/include/iwinfo/utils.h
new file mode 100644
index 000000000..d58ec5fb7
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/utils.h
@@ -0,0 +1,47 @@
+/*
+ * iwinfo - Wireless Information Library - Utility Headers
+ *
+ * Copyright (C) 2010 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ * The iwinfo library is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * The iwinfo library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the iwinfo library. If not, see http://www.gnu.org/licenses/.
+ */
+
+#ifndef __IWINFO_UTILS_H_
+#define __IWINFO_UTILS_H_
+
+#include <sys/socket.h>
+#include <net/if.h>
+
+#include "iwinfo.h"
+
+#define LOG10_MAGIC 1.25892541179
+
+int iwinfo_ioctl(int cmd, void *ifr);
+
+int iwinfo_dbm2mw(int in);
+int iwinfo_mw2dbm(int in);
+
+int iwinfo_ifup(const char *ifname);
+int iwinfo_ifdown(const char *ifname);
+int iwinfo_ifmac(const char *ifname);
+
+void iwinfo_close(void);
+
+struct iwinfo_hardware_entry * iwinfo_hardware(struct iwinfo_hardware_id *id);
+
+int iwinfo_hardware_id_from_mtd(struct iwinfo_hardware_id *id);
+
+void iwinfo_parse_rsn(struct iwinfo_crypto_entry *c, uint8_t *data, uint8_t len,
+ uint8_t defcipher, uint8_t defauth);
+
+#endif
diff --git a/package/iwinfo/src/include/iwinfo/wext.h b/package/iwinfo/src/include/iwinfo/wext.h
new file mode 100644
index 000000000..68b596ea8
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/wext.h
@@ -0,0 +1,84 @@
+/*
+ * iwinfo - Wireless Information Library - Linux Wireless Extension Headers
+ *
+ * Copyright (C) 2009-2010 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ * The iwinfo library is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * The iwinfo library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the iwinfo library. If not, see http://www.gnu.org/licenses/.
+ */
+
+#ifndef __IWINFO_WEXT_H_
+#define __IWINFO_WEXT_H_
+
+#include <fcntl.h>
+
+#include "iwinfo.h"
+#include "iwinfo/utils.h"
+#include "iwinfo/api/wext.h"
+
+
+int wext_probe(const char *ifname);
+int wext_get_mode(const char *ifname, int *buf);
+int wext_get_ssid(const char *ifname, char *buf);
+int wext_get_bssid(const char *ifname, char *buf);
+int wext_get_country(const char *ifname, char *buf);
+int wext_get_channel(const char *ifname, int *buf);
+int wext_get_frequency(const char *ifname, int *buf);
+int wext_get_frequency_offset(const char *ifname, int *buf);
+int wext_get_txpower(const char *ifname, int *buf);
+int wext_get_txpower_offset(const char *ifname, int *buf);
+int wext_get_bitrate(const char *ifname, int *buf);
+int wext_get_signal(const char *ifname, int *buf);
+int wext_get_noise(const char *ifname, int *buf);
+int wext_get_quality(const char *ifname, int *buf);
+int wext_get_quality_max(const char *ifname, int *buf);
+int wext_get_encryption(const char *ifname, char *buf);
+int wext_get_assoclist(const char *ifname, char *buf, int *len);
+int wext_get_txpwrlist(const char *ifname, char *buf, int *len);
+int wext_get_scanlist(const char *ifname, char *buf, int *len);
+int wext_get_freqlist(const char *ifname, char *buf, int *len);
+int wext_get_countrylist(const char *ifname, char *buf, int *len);
+int wext_get_hwmodelist(const char *ifname, int *buf);
+int wext_get_mbssid_support(const char *ifname, int *buf);
+int wext_get_hardware_id(const char *ifname, char *buf);
+int wext_get_hardware_name(const char *ifname, char *buf);
+void wext_close(void);
+
+static const struct iwinfo_ops wext_ops = {
+ .channel = wext_get_channel,
+ .frequency = wext_get_frequency,
+ .frequency_offset = wext_get_frequency_offset,
+ .txpower = wext_get_txpower,
+ .txpower_offset = wext_get_txpower_offset,
+ .bitrate = wext_get_bitrate,
+ .signal = wext_get_signal,
+ .noise = wext_get_noise,
+ .quality = wext_get_quality,
+ .quality_max = wext_get_quality_max,
+ .mbssid_support = wext_get_mbssid_support,
+ .hwmodelist = wext_get_hwmodelist,
+ .mode = wext_get_mode,
+ .ssid = wext_get_ssid,
+ .bssid = wext_get_bssid,
+ .country = wext_get_country,
+ .hardware_id = wext_get_hardware_id,
+ .hardware_name = wext_get_hardware_name,
+ .encryption = wext_get_encryption,
+ .assoclist = wext_get_assoclist,
+ .txpwrlist = wext_get_txpwrlist,
+ .scanlist = wext_get_scanlist,
+ .freqlist = wext_get_freqlist,
+ .countrylist = wext_get_countrylist,
+ .close = wext_close
+};
+
+#endif
diff --git a/package/iwinfo/src/include/iwinfo/wext_scan.h b/package/iwinfo/src/include/iwinfo/wext_scan.h
new file mode 100644
index 000000000..085c65310
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/wext_scan.h
@@ -0,0 +1,380 @@
+/*
+ * iwinfo - Wireless Information Library - Linux Wireless Extension Headers
+ *
+ * Copyright (C) 2009-2010 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ * The iwinfo library is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * The iwinfo library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the iwinfo library. If not, see http://www.gnu.org/licenses/.
+ */
+
+#ifndef __IWINFO_WEXT_SCAN_H_
+#define __IWINFO_WEXT_SCAN_H_
+
+#include <fcntl.h>
+
+#include "iwinfo.h"
+#include "iwinfo/utils.h"
+#include "iwinfo/api/wext.h"
+
+
+typedef struct stream_descr
+{
+ char * end; /* End of the stream */
+ char * current; /* Current event in stream of events */
+ char * value; /* Current value in event */
+} stream_descr;
+
+/*
+ * Describe how a standard IOCTL looks like.
+ */
+struct iw_ioctl_description
+{
+ uint8_t header_type; /* NULL, iw_point or other */
+ uint8_t token_type; /* Future */
+ uint16_t token_size; /* Granularity of payload */
+ uint16_t min_tokens; /* Min acceptable token number */
+ uint16_t max_tokens; /* Max acceptable token number */
+ uint32_t flags; /* Special handling of the request */
+};
+
+/* Type of headers we know about (basically union iwreq_data) */
+#define IW_HEADER_TYPE_NULL 0 /* Not available */
+#define IW_HEADER_TYPE_CHAR 2 /* char [IFNAMSIZ] */
+#define IW_HEADER_TYPE_UINT 4 /* __u32 */
+#define IW_HEADER_TYPE_FREQ 5 /* struct iw_freq */
+#define IW_HEADER_TYPE_ADDR 6 /* struct sockaddr */
+#define IW_HEADER_TYPE_POINT 8 /* struct iw_point */
+#define IW_HEADER_TYPE_PARAM 9 /* struct iw_param */
+#define IW_HEADER_TYPE_QUAL 10 /* struct iw_quality */
+
+/* Handling flags */
+/* Most are not implemented. I just use them as a reminder of some
+ * cool features we might need one day ;-) */
+#define IW_DESCR_FLAG_NONE 0x0000 /* Obvious */
+/* Wrapper level flags */
+#define IW_DESCR_FLAG_DUMP 0x0001 /* Not part of the dump command */
+#define IW_DESCR_FLAG_EVENT 0x0002 /* Generate an event on SET */
+#define IW_DESCR_FLAG_RESTRICT 0x0004 /* GET : request is ROOT only */
+ /* SET : Omit payload from generated iwevent */
+#define IW_DESCR_FLAG_NOMAX 0x0008 /* GET : no limit on request size */
+/* Driver level flags */
+#define IW_DESCR_FLAG_WAIT 0x0100 /* Wait for driver event */
+
+
+/*
+ * Meta-data about all the standard Wireless Extension request we
+ * know about.
+ */
+static const struct iw_ioctl_description standard_ioctl_descr[] = {
+ [SIOCSIWCOMMIT - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_NULL,
+ },
+ [SIOCGIWNAME - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_CHAR,
+ .flags = IW_DESCR_FLAG_DUMP,
+ },
+ [SIOCSIWNWID - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ .flags = IW_DESCR_FLAG_EVENT,
+ },
+ [SIOCGIWNWID - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ .flags = IW_DESCR_FLAG_DUMP,
+ },
+ [SIOCSIWFREQ - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_FREQ,
+ .flags = IW_DESCR_FLAG_EVENT,
+ },
+ [SIOCGIWFREQ - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_FREQ,
+ .flags = IW_DESCR_FLAG_DUMP,
+ },
+ [SIOCSIWMODE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_UINT,
+ .flags = IW_DESCR_FLAG_EVENT,
+ },
+ [SIOCGIWMODE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_UINT,
+ .flags = IW_DESCR_FLAG_DUMP,
+ },
+ [SIOCSIWSENS - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWSENS - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWRANGE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_NULL,
+ },
+ [SIOCGIWRANGE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = sizeof(struct iw_range),
+ .flags = IW_DESCR_FLAG_DUMP,
+ },
+ [SIOCSIWPRIV - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_NULL,
+ },
+ [SIOCGIWPRIV - SIOCIWFIRST] = { /* (handled directly by us) */
+ .header_type = IW_HEADER_TYPE_NULL,
+ },
+ [SIOCSIWSTATS - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_NULL,
+ },
+ [SIOCGIWSTATS - SIOCIWFIRST] = { /* (handled directly by us) */
+ .header_type = IW_HEADER_TYPE_NULL,
+ .flags = IW_DESCR_FLAG_DUMP,
+ },
+ [SIOCSIWSPY - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = sizeof(struct sockaddr),
+ .max_tokens = IW_MAX_SPY,
+ },
+ [SIOCGIWSPY - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = sizeof(struct sockaddr) +
+ sizeof(struct iw_quality),
+ .max_tokens = IW_MAX_SPY,
+ },
+ [SIOCSIWTHRSPY - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = sizeof(struct iw_thrspy),
+ .min_tokens = 1,
+ .max_tokens = 1,
+ },
+ [SIOCGIWTHRSPY - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = sizeof(struct iw_thrspy),
+ .min_tokens = 1,
+ .max_tokens = 1,
+ },
+ [SIOCSIWAP - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_ADDR,
+ },
+ [SIOCGIWAP - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_ADDR,
+ .flags = IW_DESCR_FLAG_DUMP,
+ },
+ [SIOCSIWMLME - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = sizeof(struct iw_mlme),
+ .max_tokens = sizeof(struct iw_mlme),
+ },
+ [SIOCGIWAPLIST - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = sizeof(struct sockaddr) +
+ sizeof(struct iw_quality),
+ .max_tokens = IW_MAX_AP,
+ .flags = IW_DESCR_FLAG_NOMAX,
+ },
+ [SIOCSIWSCAN - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = 0,
+ .max_tokens = sizeof(struct iw_scan_req),
+ },
+ [SIOCGIWSCAN - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_SCAN_MAX_DATA,
+ .flags = IW_DESCR_FLAG_NOMAX,
+ },
+ [SIOCSIWESSID - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_ESSID_MAX_SIZE + 1,
+ .flags = IW_DESCR_FLAG_EVENT,
+ },
+ [SIOCGIWESSID - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_ESSID_MAX_SIZE + 1,
+ .flags = IW_DESCR_FLAG_DUMP,
+ },
+ [SIOCSIWNICKN - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_ESSID_MAX_SIZE + 1,
+ },
+ [SIOCGIWNICKN - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_ESSID_MAX_SIZE + 1,
+ },
+ [SIOCSIWRATE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWRATE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWRTS - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWRTS - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWFRAG - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWFRAG - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWTXPOW - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWTXPOW - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWRETRY - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWRETRY - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWENCODE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_ENCODING_TOKEN_MAX,
+ .flags = IW_DESCR_FLAG_EVENT | IW_DESCR_FLAG_RESTRICT,
+ },
+ [SIOCGIWENCODE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_ENCODING_TOKEN_MAX,
+ .flags = IW_DESCR_FLAG_DUMP | IW_DESCR_FLAG_RESTRICT,
+ },
+ [SIOCSIWPOWER - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWPOWER - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWMODUL - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWMODUL - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWGENIE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [SIOCGIWGENIE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [SIOCSIWAUTH - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWAUTH - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWENCODEEXT - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = sizeof(struct iw_encode_ext),
+ .max_tokens = sizeof(struct iw_encode_ext) +
+ IW_ENCODING_TOKEN_MAX,
+ },
+ [SIOCGIWENCODEEXT - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = sizeof(struct iw_encode_ext),
+ .max_tokens = sizeof(struct iw_encode_ext) +
+ IW_ENCODING_TOKEN_MAX,
+ },
+ [SIOCSIWPMKSA - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = sizeof(struct iw_pmksa),
+ .max_tokens = sizeof(struct iw_pmksa),
+ },
+};
+
+/*
+ * Meta-data about all the additional standard Wireless Extension events
+ * we know about.
+ */
+static const struct iw_ioctl_description standard_event_descr[] = {
+ [IWEVTXDROP - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_ADDR,
+ },
+ [IWEVQUAL - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_QUAL,
+ },
+ [IWEVCUSTOM - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_CUSTOM_MAX,
+ },
+ [IWEVREGISTERED - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_ADDR,
+ },
+ [IWEVEXPIRED - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_ADDR,
+ },
+ [IWEVGENIE - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [IWEVMICHAELMICFAILURE - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = sizeof(struct iw_michaelmicfailure),
+ },
+ [IWEVASSOCREQIE - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [IWEVASSOCRESPIE - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [IWEVPMKIDCAND - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = sizeof(struct iw_pmkid_cand),
+ },
+};
+
+/* Size (in bytes) of various events */
+static const int event_type_size[] = {
+ IW_EV_LCP_PK_LEN, /* IW_HEADER_TYPE_NULL */
+ 0,
+ IW_EV_CHAR_PK_LEN, /* IW_HEADER_TYPE_CHAR */
+ 0,
+ IW_EV_UINT_PK_LEN, /* IW_HEADER_TYPE_UINT */
+ IW_EV_FREQ_PK_LEN, /* IW_HEADER_TYPE_FREQ */
+ IW_EV_ADDR_PK_LEN, /* IW_HEADER_TYPE_ADDR */
+ 0,
+ IW_EV_POINT_PK_LEN, /* Without variable payload */
+ IW_EV_PARAM_PK_LEN, /* IW_HEADER_TYPE_PARAM */
+ IW_EV_QUAL_PK_LEN, /* IW_HEADER_TYPE_QUAL */
+};
+
+
+static const unsigned int standard_ioctl_num =
+ (sizeof(standard_ioctl_descr) / sizeof(struct iw_ioctl_description));
+
+static const unsigned int standard_event_num =
+ (sizeof(standard_event_descr) / sizeof(struct iw_ioctl_description));
+
+#define IW_IE_CYPHER_NUM 8
+#define IW_IE_KEY_MGMT_NUM 3
+
+#endif
diff --git a/package/iwinfo/src/include/iwinfo/wl.h b/package/iwinfo/src/include/iwinfo/wl.h
new file mode 100644
index 000000000..db37e3759
--- /dev/null
+++ b/package/iwinfo/src/include/iwinfo/wl.h
@@ -0,0 +1,84 @@
+/*
+ * iwinfo - Wireless Information Library - Broadcom wl.o Headers
+ *
+ * Copyright (C) 2009-2010 Jo-Philipp Wich <xm@subsignal.org>
+ *
+ * The iwinfo library is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * The iwinfo library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the iwinfo library. If not, see http://www.gnu.org/licenses/.
+ */
+
+#ifndef __IWINFO_WL_H_
+#define __IWINFO_WL_H_
+
+#include <fcntl.h>
+
+#include "iwinfo.h"
+#include "iwinfo/utils.h"
+#include "iwinfo/api/broadcom.h"
+
+int wl_probe(const char *ifname);
+int wl_get_mode(const char *ifname, int *buf);
+int wl_get_ssid(const char *ifname, char *buf);
+int wl_get_bssid(const char *ifname, char *buf);
+int wl_get_country(const char *ifname, char *buf);
+int wl_get_channel(const char *ifname, int *buf);
+int wl_get_frequency(const char *ifname, int *buf);
+int wl_get_frequency_offset(const char *ifname, int *buf);
+int wl_get_txpower(const char *ifname, int *buf);
+int wl_get_txpower_offset(const char *ifname, int *buf);
+int wl_get_bitrate(const char *ifname, int *buf);
+int wl_get_signal(const char *ifname, int *buf);
+int wl_get_noise(const char *ifname, int *buf);
+int wl_get_quality(const char *ifname, int *buf);
+int wl_get_quality_max(const char *ifname, int *buf);
+int wl_get_enctype(const char *ifname, char *buf);
+int wl_get_encryption(const char *ifname, char *buf);
+int wl_get_assoclist(const char *ifname, char *buf, int *len);
+int wl_get_txpwrlist(const char *ifname, char *buf, int *len);
+int wl_get_scanlist(const char *ifname, char *buf, int *len);
+int wl_get_freqlist(const char *ifname, char *buf, int *len);
+int wl_get_countrylist(const char *ifname, char *buf, int *len);
+int wl_get_hwmodelist(const char *ifname, int *buf);
+int wl_get_mbssid_support(const char *ifname, int *buf);
+int wl_get_hardware_id(const char *ifname, char *buf);
+int wl_get_hardware_name(const char *ifname, char *buf);
+void wl_close(void);
+
+static const struct iwinfo_ops wl_ops = {
+ .channel = wl_get_channel,
+ .frequency = wl_get_frequency,
+ .frequency_offset = wl_get_frequency_offset,
+ .txpower = wl_get_txpower,
+ .txpower_offset = wl_get_txpower_offset,
+ .bitrate = wl_get_bitrate,
+ .signal = wl_get_signal,
+ .noise = wl_get_noise,
+ .quality = wl_get_quality,
+ .quality_max = wl_get_quality_max,
+ .mbssid_support = wl_get_mbssid_support,
+ .hwmodelist = wl_get_hwmodelist,
+ .mode = wl_get_mode,
+ .ssid = wl_get_ssid,
+ .bssid = wl_get_bssid,
+ .country = wl_get_country,
+ .hardware_id = wl_get_hardware_id,
+ .hardware_name = wl_get_hardware_name,
+ .encryption = wl_get_encryption,
+ .assoclist = wl_get_assoclist,
+ .txpwrlist = wl_get_txpwrlist,
+ .scanlist = wl_get_scanlist,
+ .freqlist = wl_get_freqlist,
+ .countrylist = wl_get_countrylist,
+ .close = wl_close
+};
+
+#endif