1 files changed, 96 insertions, 0 deletions
diff --git a/package/iw/patches/001-nl80211_h_sync.patch b/package/iw/patches/001-nl80211_h_sync.patch
new file mode 100644
index 000000000..8e776643b
--- /dev/null
+++ b/package/iw/patches/001-nl80211_h_sync.patch
@@ -0,0 +1,96 @@
+--- a/nl80211.h
++++ b/nl80211.h
+@@ -565,6 +565,14 @@
+  *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
+  *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+  *
++ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
++ *	its %NL80211_ATTR_WDEV identifier. It must have been created with
++ *	%NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
++ *	P2P Device can be used for P2P operations, e.g. remain-on-channel and
++ *	public action frame TX.
++ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
++ *	its %NL80211_ATTR_WDEV identifier.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -708,6 +716,9 @@ enum nl80211_commands {
+ 
+ 	NL80211_CMD_CH_SWITCH_NOTIFY,
+ 
++	NL80211_CMD_START_P2P_DEVICE,
++	NL80211_CMD_STOP_P2P_DEVICE,
++
+ 	/* add new commands above here */
+ 
+ 	/* used to define NL80211_CMD_MAX below */
+@@ -1506,6 +1517,8 @@ enum nl80211_attrs {
+ 
+ 	NL80211_ATTR_USER_REG_HINT_TYPE,
+ 
++	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
++
+ 	/* add attributes here, update the policy in nl80211.c */
+ 
+ 	__NL80211_ATTR_AFTER_LAST,
+@@ -1575,6 +1588,10 @@ enum nl80211_attrs {
+  * @NL80211_IFTYPE_MESH_POINT: mesh point
+  * @NL80211_IFTYPE_P2P_CLIENT: P2P client
+  * @NL80211_IFTYPE_P2P_GO: P2P group owner
++ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
++ *	and therefore can't be created in the normal ways, use the
++ *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
++ *	commands to create and destroy one
+  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+  * @NUM_NL80211_IFTYPES: number of defined interface types
+  *
+@@ -1593,6 +1610,7 @@ enum nl80211_iftype {
+ 	NL80211_IFTYPE_MESH_POINT,
+ 	NL80211_IFTYPE_P2P_CLIENT,
+ 	NL80211_IFTYPE_P2P_GO,
++	NL80211_IFTYPE_P2P_DEVICE,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_IFTYPES,
+@@ -1744,6 +1762,8 @@ enum nl80211_sta_bss_param {
+  * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
+  * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
+  * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
++ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
++ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
+  * @__NL80211_STA_INFO_AFTER_LAST: internal
+  * @NL80211_STA_INFO_MAX: highest possible station info attribute
+  */
+@@ -1768,6 +1788,8 @@ enum nl80211_sta_info {
+ 	NL80211_STA_INFO_STA_FLAGS,
+ 	NL80211_STA_INFO_BEACON_LOSS,
+ 	NL80211_STA_INFO_T_OFFSET,
++	NL80211_STA_INFO_CHAIN_SIGNAL,
++	NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
+ 
+ 	/* keep last */
+ 	__NL80211_STA_INFO_AFTER_LAST,
+@@ -2994,12 +3016,18 @@ enum nl80211_ap_sme_features {
+  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
+  *	to work properly to suppport receiving regulatory hints from
+  *	cellular base stations.
++ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
++ *	P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
++ *	in the interface combinations, even when it's only used for scan
++ *	and remain-on-channel. This could be due to, for example, the
++ *	remain-on-channel implementation requiring a channel context.
+  */
+ enum nl80211_feature_flags {
+-	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
+-	NL80211_FEATURE_HT_IBSS		= 1 << 1,
+-	NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+-	NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
++	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
++	NL80211_FEATURE_HT_IBSS				= 1 << 1,
++	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
++	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
++	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
+ };
+ 
+ /**