aboutsummaryrefslogtreecommitdiffstats
path: root/package/broadcom-diag
diff options
context:
space:
mode:
Diffstat (limited to 'package/broadcom-diag')
-rw-r--r--package/broadcom-diag/Makefile37
-rw-r--r--package/broadcom-diag/src/Makefile17
-rw-r--r--package/broadcom-diag/src/diag.c1686
-rw-r--r--package/broadcom-diag/src/diag.h134
-rw-r--r--package/broadcom-diag/src/gpio.h16
5 files changed, 1890 insertions, 0 deletions
diff --git a/package/broadcom-diag/Makefile b/package/broadcom-diag/Makefile
new file mode 100644
index 000000000..61b35290f
--- /dev/null
+++ b/package/broadcom-diag/Makefile
@@ -0,0 +1,37 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=broadcom-diag
+PKG_RELEASE:=10
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/diag
+ SUBMENU:=Other modules
+ DEPENDS:=@TARGET_brcm47xx
+ TITLE:=Driver for router LEDs and Buttons
+ FILES:=$(PKG_BUILD_DIR)/diag.ko
+endef
+
+define Build/Prepare
+ mkdir -p $(PKG_BUILD_DIR)
+ $(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+ $(MAKE) -C "$(LINUX_DIR)" \
+ CROSS_COMPILE="$(TARGET_CROSS)" \
+ ARCH="$(LINUX_KARCH)" \
+ SUBDIRS="$(PKG_BUILD_DIR)" \
+ EXTRA_CFLAGS="$(BUILDFLAGS)" \
+ modules
+endef
+
+$(eval $(call KernelPackage,diag))
diff --git a/package/broadcom-diag/src/Makefile b/package/broadcom-diag/src/Makefile
new file mode 100644
index 000000000..44c80a8bf
--- /dev/null
+++ b/package/broadcom-diag/src/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for diag driver
+#
+# Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+#
+
+obj-m := diag.o
+
+ifeq ($(MAKING_MODULES),1)
+
+-include $(TOPDIR)/Rules.make
+endif
diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
new file mode 100644
index 000000000..7e0ff02e1
--- /dev/null
+++ b/package/broadcom-diag/src/diag.c
@@ -0,0 +1,1686 @@
+/*
+ * diag.c - GPIO interface driver for Broadcom boards
+ *
+ * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
+ * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2008 Andy Boyett <agb@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kmod.h>
+#include <linux/proc_fs.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <asm/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/skbuff.h>
+#include <linux/netlink.h>
+#include <linux/kobject.h>
+#include <net/sock.h>
+extern u64 uevent_next_seqnum(void);
+
+#include "gpio.h"
+#include "diag.h"
+#define getvar(str) (nvram_get(str)?:"")
+
+static inline int startswith (char *source, char *cmp) { return !strncmp(source,cmp,strlen(cmp)); }
+static int fill_event(struct event_t *);
+static unsigned int gpiomask = 0;
+module_param(gpiomask, int, 0644);
+
+enum {
+ /* Linksys */
+ WAP54GV1,
+ WAP54GV2,
+ WAP54GV3,
+ WRT54GV1,
+ WRT54G,
+ WRTSL54GS,
+ WRT54G3G,
+ WRT54G3GV2_VF,
+ WRT150NV1,
+ WRT150NV11,
+ WRT160NV1,
+ WRT160NV3,
+ WRT300NV11,
+ WRT350N,
+ WRT600N,
+ WRT600NV11,
+ WRT610N,
+ WRT610NV2,
+ E3000V1,
+
+ /* ASUS */
+ WLHDD,
+ WL300G,
+ WL320GE,
+ WL330GE,
+ WL500G,
+ WL500GD,
+ WL500GP,
+ WL500GPV2,
+ WL500W,
+ WL520GC,
+ WL520GU,
+ ASUS_4702,
+ WL700GE,
+ RTN16,
+
+ /* Buffalo */
+ WBR2_G54,
+ WHR_G54S,
+ WHR_HP_G54,
+ WHR_G125,
+ WHR2_A54G54,
+ WLA2_G54L,
+ WZR_G300N,
+ WZR_RS_G54,
+ WZR_RS_G54HP,
+ BUFFALO_UNKNOWN,
+ BUFFALO_UNKNOWN_4710,
+
+ /* Siemens */
+ SE505V1,
+ SE505V2,
+
+ /* US Robotics */
+ USR5461,
+
+ /* Dell */
+ TM2300,
+ TM2300V2,
+
+ /* Motorola */
+ WE800G,
+ WR850GV1,
+ WR850GV2V3,
+ WR850GP,
+
+ /* Belkin */
+ BELKIN_UNKNOWN,
+ BELKIN_F7D4301,
+
+ /* Netgear */
+ WGT634U,
+ WNR834BV1,
+ WNR834BV2,
+
+ /* Trendware */
+ TEW411BRPP,
+
+ /* SimpleTech */
+ STI_NAS,
+
+ /* D-Link */
+ DIR130,
+ DIR320,
+ DIR330,
+ DWL3150,
+
+ /* Sitecom */
+ WL105B,
+
+ /* Western Digital */
+ WDNetCenter,
+
+ /* Askey */
+ RT210W,
+
+ /* OvisLink */
+ WL1600GL,
+
+ /* Microsoft */
+ MN700,
+
+ /* Edimax */
+ PS1208MFG,
+};
+
+static void __init bcm4780_init(void) {
+ int pin = 1 << 3;
+
+ /* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
+ printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
+ bcm47xx_gpio_outen(pin, pin);
+ bcm47xx_gpio_control(pin, 0);
+ bcm47xx_gpio_out(pin, pin);
+
+ /* Wait 5s, so the HDD can spin up */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ * 5);
+}
+
+static void __init NetCenter_init(void) {
+ /* unset pin 6 (+12V) */
+ int pin = 1 << 6;
+ bcm47xx_gpio_outen(pin, pin);
+ bcm47xx_gpio_control(pin, 0);
+ bcm47xx_gpio_out(pin, pin);
+ /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
+ pin = 1 << 1;
+ bcm47xx_gpio_outen(pin, pin);
+ bcm47xx_gpio_control(pin, 0);
+ bcm47xx_gpio_out(pin, pin);
+ /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
+ bcm4780_init();
+}
+
+static void __init bcm57xx_init(void) {
+ int pin = 1 << 2;
+
+ /* FIXME: switch comes up, but port mappings/vlans not right */
+ bcm47xx_gpio_outen(pin, pin);
+ bcm47xx_gpio_control(pin, 0);
+ bcm47xx_gpio_out(pin, pin);
+}
+
+static struct platform_t __initdata platforms[] = {
+ /* Linksys */
+ [WAP54GV1] = {
+ .name = "Linksys WAP54G V1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 3 },
+ { .name = "wlan", .gpio = 1 << 4 },
+ },
+ },
+ [WAP54GV2] = {
+ .name = "Linksys WAP54G V2",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "wlan", .gpio = 1 << 5, .polarity = REVERSE },
+ /* GPIO 6 is b44 (eth0, LAN) PHY power */
+ },
+ },
+ [WAP54GV3] = {
+ .name = "Linksys WAP54G V3",
+ .buttons = {
+ /* FIXME: verify this */
+ { .name = "reset", .gpio = 1 << 7 },
+ { .name = "ses", .gpio = 1 << 0 },
+ },
+ .leds = {
+ /* FIXME: diag? */
+ { .name = "ses", .gpio = 1 << 1 },
+ },
+ },
+ [WRT54GV1] = {
+ .name = "Linksys WRT54G V1.x",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 0x13 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
+ { .name = "dmz", .gpio = 0x12 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
+ },
+ },
+ [WRT54G] = {
+ .name = "Linksys WRT54G/GS/GL",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "dmz", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "ses_white", .gpio = 1 << 2, .polarity = REVERSE },
+ { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WRTSL54GS] = {
+ .name = "Linksys WRTSL54GS",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "dmz", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "ses_white", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "ses_orange", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ [WRT54G3G] = {
+ .name = "Linksys WRT54G3G",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "3g", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "dmz", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "3g_green", .gpio = 1 << 2, .polarity = NORMAL },
+ { .name = "3g_blue", .gpio = 1 << 3, .polarity = NORMAL },
+ { .name = "3g_blink", .gpio = 1 << 5, .polarity = NORMAL },
+ },
+ },
+ [WRT54G3GV2_VF] = {
+ .name = "Linksys WRT54G3GV2-VF",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "3g", .gpio = 1 << 5 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "3g_green", .gpio = 1 << 2, .polarity = NORMAL },
+ { .name = "3g_blue", .gpio = 1 << 3, .polarity = NORMAL },
+ },
+ },
+ [WRT150NV1] = {
+ .name = "Linksys WRT150N V1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE },
+ },
+ },
+ [WRT150NV11] = {
+ .name = "Linksys WRT150N V1.1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE },
+ },
+ },
+ [WRT160NV1] = {
+ .name = "Linksys WRT160N v1.x",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "ses_blue", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
+ },
+ },
+ [WRT160NV3] = {
+ .name = "Linksys WRT160N V3",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 5 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "ses_blue", .gpio = 1 << 4, .polarity = REVERSE },
+ { .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE },
+ },
+ },
+ [WRT300NV11] = {
+ .name = "Linksys WRT300N V1.1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 }, // "Reset" on back panel
+ { .name = "ses", .gpio = 1 << 4 }, // "Reserved" on top panel
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // "Power"
+ { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber
+ { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green
+ },
+ .platform_init = bcm57xx_init,
+ },
+ [WRT350N] = {
+ .name = "Linksys WRT350N",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 8 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "ses_green", .gpio = 1 << 9, .polarity = REVERSE },
+ { .name = "usb_blink", .gpio = 1 << 10, .polarity = REVERSE },
+ { .name = "usb", .gpio = 1 << 11, .polarity = REVERSE },
+ },
+ .platform_init = bcm57xx_init,
+ },
+ [WRT600N] = {
+ .name = "Linksys WRT600N",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 2, .polarity = REVERSE }, // Power LED
+ { .name = "usb", .gpio = 1 << 3, .polarity = REVERSE }, // USB LED
+ { .name = "wl0_ses_amber", .gpio = 1 << 8, .polarity = REVERSE }, // 2.4Ghz LED Amber
+ { .name = "wl0_ses_green", .gpio = 1 << 9, .polarity = REVERSE }, // 2.4Ghz LED Green
+ { .name = "wl1_ses_amber", .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
+ { .name = "wl1_ses_green", .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
+ },
+ .platform_init = bcm57xx_init,
+ },
+ [WRT600NV11] = {
+ .name = "Linksys WRT600N V1.1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 2, .polarity = REVERSE }, // Power LED
+ { .name = "usb", .gpio = 1 << 3, .polarity = REVERSE }, // USB LED
+ { .name = "wl0_ses_amber", .gpio = 1 << 8, .polarity = REVERSE }, // 2.4Ghz LED Amber
+ { .name = "wl0_ses_green", .gpio = 1 << 9, .polarity = REVERSE }, // 2.4Ghz LED Green
+ { .name = "wl1_ses_amber", .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
+ { .name = "wl1_ses_green", .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
+ },
+ .platform_init = bcm57xx_init,
+ },
+ [WRT610N] = {
+ .name = "Linksys WRT610N",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 8 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // Power LED
+ { .name = "usb", .gpio = 1 << 0, .polarity = REVERSE }, // USB LED
+ { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED amber
+ { .name = "ses_blue", .gpio = 1 << 9, .polarity = REVERSE }, // WiFi protected setup LED blue
+ },
+ },
+ [WRT610NV2] = {
+ .name = "Linksys WRT610N V2",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 5, .polarity = NORMAL }, // Power LED
+ { .name = "usb", .gpio = 1 << 7, .polarity = NORMAL }, // USB LED
+ { .name = "ses_amber", .gpio = 1 << 0, .polarity = REVERSE }, // WiFi protected setup LED amber
+ { .name = "ses_blue", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED blue
+ { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED
+ },
+ },
+ [E3000V1] = {
+ .name = "Linksys E3000 V1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 5, .polarity = NORMAL }, // Power LED
+ { .name = "usb", .gpio = 1 << 7, .polarity = NORMAL }, // USB LED
+ { .name = "ses_amber", .gpio = 1 << 0, .polarity = REVERSE }, // WiFi protected setup LED amber
+ { .name = "ses_blue", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED blue
+ { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED
+ },
+ },
+ /* Asus */
+ [WLHDD] = {
+ .name = "ASUS WL-HDD",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "usb", .gpio = 1 << 2, .polarity = REVERSE },
+ },
+ },
+ [WL300G] = {
+ .name = "ASUS WL-300g",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WL320GE] = {
+ .name = "ASUS WL-320gE/WL-320gP",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "power", .gpio = 1 << 2, .polarity = REVERSE },
+ { .name = "link", .gpio = 1 << 11, .polarity = REVERSE },
+ },
+ },
+ [WL330GE] = {
+ .name = "ASUS WL-330gE",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 2 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WL500G] = {
+ .name = "ASUS WL-500g",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WL500GD] = {
+ .name = "ASUS WL-500g Deluxe",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WL500GP] = {
+ .name = "ASUS WL-500g Premium",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [WL500GPV2] = {
+ .name = "ASUS WL-500g Premium V2",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 2 },
+ { .name = "ses", .gpio = 1 << 3 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [WL500W] = {
+ .name = "ASUS WL-500W",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 5, .polarity = REVERSE },
+ },
+ },
+ [WL520GC] = {
+ .name = "ASUS WL-520GC",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 2 },
+ { .name = "ses", .gpio = 1 << 3 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [WL520GU] = {
+ .name = "ASUS WL-520gU",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 2 },
+ { .name = "ses", .gpio = 1 << 3 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [ASUS_4702] = {
+ .name = "ASUS (unknown, BCM4702)",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WL700GE] = {
+ .name = "ASUS WL-700gE",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state
+ { .name = "ses", .gpio = 1 << 4 }, // on back, actual name ezsetup
+ { .name = "power", .gpio = 1 << 0 }, // on front
+ { .name = "copy", .gpio = 1 << 6 }, // on front
+ },
+ .leds = {
+#if 0
+ // GPIO that controls power led also enables/disables some essential functions
+ // - power to HDD
+ // - switch leds
+ { .name = "power", .gpio = 1 << 3, .polarity = NORMAL }, // actual name power
+#endif
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
+ },
+ .platform_init = bcm4780_init,
+ },
+ [RTN16] = {
+ .name = "ASUS RT-N16",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 8 },
+ { .name = "ses", .gpio = 1 << 5 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 7, .polarity = NORMAL },
+ },
+ },
+ /* Buffalo */
+ [WHR_G54S] = {
+ .name = "Buffalo WHR-G54S",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ { .name = "bridge", .gpio = 1 << 5 },
+ { .name = "ses", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "internal", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
+ { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 2, .polarity = REVERSE },
+ },
+ },
+ [WBR2_G54] = {
+ .name = "Buffalo WBR2-G54",
+ /* FIXME: verify */
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [WHR_HP_G54] = {
+ .name = "Buffalo WHR-HP-G54",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ { .name = "bridge", .gpio = 1 << 5 },
+ { .name = "ses", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "internal", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE },
+ { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 2, .polarity = REVERSE },
+ },
+ },
+ [WHR_G125] = {
+ .name = "Buffalo WHR-G125",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ { .name = "bridge", .gpio = 1 << 5 },
+ { .name = "ses", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "internal", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE },
+ { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 2, .polarity = REVERSE },
+ },
+ },
+ [WHR2_A54G54] = {
+ .name = "Buffalo WHR2-A54G54",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ [WLA2_G54L] = {
+ .name = "Buffalo WLA2-G54L",
+ /* FIXME: verify */
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [WZR_G300N] = {
+ .name = "Buffalo WZR-G300N",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE },
+ { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
+ },
+ },
+ [WZR_RS_G54] = {
+ .name = "Buffalo WZR-RS-G54",
+ .buttons = {
+ { .name = "ses", .gpio = 1 << 0 },
+ { .name = "reset", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
+ { .name = "vpn", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [WZR_RS_G54HP] = {
+ .name = "Buffalo WZR-RS-G54HP",
+ .buttons = {
+ { .name = "ses", .gpio = 1 << 0 },
+ { .name = "reset", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
+ { .name = "vpn", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [BUFFALO_UNKNOWN] = {
+ .name = "Buffalo (unknown)",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [BUFFALO_UNKNOWN_4710] = {
+ .name = "Buffalo (unknown, BCM4710)",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ /* Siemens */
+ [SE505V1] = {
+ .name = "Siemens SE505 V1",
+ .buttons = {
+ /* No usable buttons */
+ },
+ .leds = {
+// { .name = "power", .gpio = 1 << 0 .polarity = REVERSE }, // Usable when retrofitting D26 (?)
+ { .name = "dmz", .gpio = 1 << 4, .polarity = REVERSE }, // actual name WWW
+ { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE },
+ },
+ },
+ [SE505V2] = {
+ .name = "Siemens SE505 V2",
+ .buttons = {
+ /* No usable buttons */
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "dmz", .gpio = 1 << 0, .polarity = REVERSE }, // actual name WWW
+ { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE },
+ },
+ },
+ /* US Robotics */
+ [USR5461] = {
+ .name = "U.S. Robotics USR5461",
+ .buttons = {
+ /* No usable buttons */
+ },
+ .leds = {
+ { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "printer", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ /* Dell */
+ [TM2300] = {
+ .name = "Dell TrueMobile 2300",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "wlan", .gpio = 1 << 6, .polarity = REVERSE },
+ { .name = "power", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ [TM2300V2] = {
+ .name = "Dell TrueMobile 2300 v2",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "wlan", .gpio = 1 << 6, .polarity = REVERSE },
+ { .name = "power", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ /* Motorola */
+ [WE800G] = {
+ .name = "Motorola WE800G",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 4, .polarity = NORMAL },
+ { .name = "diag", .gpio = 1 << 2, .polarity = REVERSE },
+ { .name = "wlan_amber", .gpio = 1 << 1, .polarity = NORMAL },
+ },
+ },
+ [WR850GV1] = {
+ .name = "Motorola WR850G V1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 4, .polarity = NORMAL },
+ { .name = "diag", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "dmz", .gpio = 1 << 6, .polarity = NORMAL },
+ { .name = "wlan_red", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "wlan_green", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ [WR850GV2V3] = {
+ .name = "Motorola WR850G V2/V3",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 5 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "wan", .gpio = 1 << 6, .polarity = INPUT },
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ [WR850GP] = {
+ .name = "Motorola WR850GP",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 5 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "dmz", .gpio = 1 << 6, .polarity = REVERSE },
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+
+ /* Belkin */
+ [BELKIN_UNKNOWN] = {
+ .name = "Belkin (unknown)",
+ /* FIXME: verify & add detection */
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 5, .polarity = NORMAL },
+ { .name = "wlan", .gpio = 1 << 3, .polarity = NORMAL },
+ { .name = "connected", .gpio = 1 << 0, .polarity = NORMAL },
+ },
+ },
+ [BELKIN_F7D4301] = {
+ .name = "Belkin PlayMax F7D4301",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "wps", .gpio = 1 << 8 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 11, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 13, .polarity = REVERSE },
+ { .name = "led0", .gpio = 1 << 14, .polarity = REVERSE },
+ { .name = "led1", .gpio = 1 << 15, .polarity = REVERSE },
+ },
+ },
+ /* Netgear */
+ [WGT634U] = {
+ .name = "Netgear WGT634U",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 2 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 3, .polarity = NORMAL },
+ },
+ },
+ /* Netgear */
+ [WNR834BV1] = {
+ .name = "Netgear WNR834B V1",
+ .buttons = { /* TODO: add reset button and confirm LEDs - GPIO from dd-wrt */ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 4, .polarity = REVERSE },
+ { .name = "diag", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 6, .polarity = REVERSE },
+ },
+ },
+ /* Netgear */
+ [WNR834BV2] = {
+ .name = "Netgear WNR834B V2",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 2, .polarity = NORMAL },
+ { .name = "diag", .gpio = 1 << 3, .polarity = NORMAL },
+ { .name = "connected", .gpio = 1 << 7, .polarity = NORMAL },
+ },
+ },
+ /* Trendware */
+ [TEW411BRPP] = {
+ .name = "Trendware TEW411BRP+",
+ .buttons = {
+ { /* No usable buttons */ },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 7, .polarity = NORMAL },
+ { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "bridge", .gpio = 1 << 6, .polarity = NORMAL },
+ },
+ },
+ /* SimpleTech */
+ [STI_NAS] = {
+ .name = "SimpleTech SimpleShare NAS",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 }, // Power button on back, named reset to enable failsafe.
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
+ },
+ .platform_init = bcm4780_init,
+ },
+ /* D-Link */
+ [DIR130] = {
+ .name = "D-Link DIR-130",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 3},
+ { .name = "reserved", .gpio = 1 << 7},
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 0},
+ { .name = "blue", .gpio = 1 << 6},
+ },
+ },
+ [DIR320] = {
+ .name = "D-Link DIR-320",
+ .buttons = {
+ { .name = "reserved", .gpio = 1 << 6},
+ { .name = "reset", .gpio = 1 << 7},
+ },
+ .leds = {
+ { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL },
+ { .name = "diag", .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */
+ { .name = "red", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "blue", .gpio = 1 << 4, .polarity = REVERSE },
+ { .name = "usb", .gpio = 1 << 5, .polarity = NORMAL },
+ },
+ },
+ [DIR330] = {
+ .name = "D-Link DIR-330",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 3},
+ { .name = "reserved", .gpio = 1 << 7},
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 0},
+ { .name = "usb", .gpio = 1 << 4},
+ { .name = "blue", .gpio = 1 << 6},
+ },
+ },
+ [DWL3150] = {
+ .name = "D-Link DWL-3150",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7},
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 2},
+ { .name = "status", .gpio = 1 << 1},
+ },
+ },
+ /* Double check */
+ [WL105B] = {
+ .name = "Sitecom WL-105b",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 10},
+ },
+ .leds = {
+ { .name = "wlan", .gpio = 1 << 4},
+ { .name = "power", .gpio = 1 << 3},
+ },
+ },
+ /* Western Digital Net Center */
+ [WDNetCenter] = {
+ .name = "Western Digital NetCenter",
+ .buttons = {
+ { .name = "power", .gpio = 1 << 0},
+ { .name = "reset", .gpio = 1 << 7},
+ },
+ .platform_init = NetCenter_init,
+ },
+ /* Askey (and clones) */
+ [RT210W] = {
+ .name = "Askey RT210W",
+ .buttons = {
+ /* Power button is hard-wired to hardware reset */
+ /* but is also connected to GPIO 7 (probably for bootloader recovery) */
+ { .name = "power", .gpio = 1 << 7},
+ },
+ .leds = {
+ /* These were verified and named based on Belkin F5D4230-4 v1112 */
+ { .name = "connected", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "power", .gpio = 1 << 5, .polarity = REVERSE },
+ },
+ },
+ [WL1600GL] = {
+ .name = "OvisLink WL-1600GL",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 3 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "wps", .gpio = 1 << 2, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE },
+ { .name = "connected", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ /* Microsoft */
+ [MN700] = {
+ .name = "Microsoft MN-700",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 6, .polarity = NORMAL },
+ },
+ },
+ /* Edimax */
+ [PS1208MFG] = {
+ .name = "Edimax PS-1208MFG",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "status", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL },
+ },
+ },
+};
+
+static struct platform_t __init *platform_detect(void)
+{
+ char *boardnum, *boardtype, *buf;
+
+ if (strcmp(getvar("nvram_type"), "cfe") == 0)
+ return &platforms[WGT634U];
+
+ /* Look for a model identifier */
+
+ /* Based on "model_name" */
+ if ((buf = nvram_get("model_name"))) {
+ if (!strcmp(buf, "DIR-130"))
+ return &platforms[DIR130];
+ if (!strcmp(buf, "DIR-330"))
+ return &platforms[DIR330];
+ }
+
+ /* Based on "wsc_modelname */
+ if ((buf = nvram_get("wsc_modelname"))) {
+ if (!strcmp(buf, "WRT610N"))
+ return &platforms[WRT610N];
+ }
+
+ /* Based on "model_no" */
+ if ((buf = nvram_get("model_no"))) {
+ if (startswith(buf,"WL700")) /* WL700* */
+ return &platforms[WL700GE];
+ }
+
+ /* Based on "hardware_version" */
+ if ((buf = nvram_get("hardware_version"))) {
+ if (startswith(buf,"WL500GPV2-")) /* WL500GPV2-* */
+ return &platforms[WL500GPV2];
+ if (startswith(buf,"WL520GC-")) /* WL520GU-* */
+ return &platforms[WL520GC];
+ if (startswith(buf,"WL520GU-")) /* WL520GU-* */
+ return &platforms[WL520GU];
+ if (startswith(buf,"WL330GE-")) /* WL330GE-* */
+ return &platforms[WL330GE];
+ if (startswith(buf,"RT-N16-")) /* RT-N16-* */
+ return &platforms[RTN16];
+ if (startswith(buf,"F7D4301")) /* F7D4301* */
+ return &platforms[BELKIN_F7D4301];
+ }
+
+ /* Based on "ModelId" */
+ if ((buf = nvram_get("ModelId"))) {
+ if (!strcmp(buf, "WR850GP"))
+ return &platforms[WR850GP];
+ if (!strcmp(buf, "WR850G"))
+ return &platforms[WR850GV2V3];
+ if (!strcmp(buf, "WX-5565") && !strcmp(getvar("boardtype"),"bcm94710ap"))
+ return &platforms[TM2300]; /* Dell TrueMobile 2300 */
+ if (startswith(buf,"WE800G")) /* WE800G* */
+ return &platforms[WE800G];
+ }
+
+ /* Buffalo */
+ if ((buf = (nvram_get("melco_id") ?: nvram_get("buffalo_id")))) {
+ /* Buffalo hardware, check id for specific hardware matches */
+ if (!strcmp(buf, "29bb0332"))
+ return &platforms[WBR2_G54];
+ if (!strcmp(buf, "29129"))
+ return &platforms[WLA2_G54L];
+ if (!strcmp(buf, "30189"))
+ return &platforms[WHR_HP_G54];
+ if (!strcmp(buf, "32093"))
+ return &platforms[WHR_G125];
+ if (!strcmp(buf, "30182"))
+ return &platforms[WHR_G54S];
+ if (!strcmp(buf, "290441dd"))
+ return &platforms[WHR2_A54G54];
+ if (!strcmp(buf, "31120"))
+ return &platforms[WZR_G300N];
+ if (!strcmp(buf, "30083"))
+ return &platforms[WZR_RS_G54];
+ if (!strcmp(buf, "30103"))
+ return &platforms[WZR_RS_G54HP];
+ }
+
+ /* no easy model number, attempt to guess */
+ boardnum = getvar("boardnum");
+ boardtype = getvar("boardtype");
+
+ if (!strcmp(boardnum, "20070615")) { /* Linksys WRT600N v1/V1.1 */
+ if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0") && !strcmp(getvar("switch_type"),"BCM5395"))
+ return &platforms[WRT600NV11];
+
+ if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0"))
+ return &platforms[WRT600N];
+ }
+
+ /*
+ * Normally, these would go inside the "CFE based - newer hardware" block below; however, during early init, the
+ * "pmon_ver" variable is not available on the E3000v1 (and probably the WRT610Nv2 also). Until this is figured out,
+ * these will need to remain here in order for platform detection to work.
+ */
+ if (!strcmp(boardnum, "42")) { /* Linksys */
+ if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "E300") && !strcmp(getvar("boot_hw_ver"), "1.0"))
+ return &platforms[E3000V1];
+
+ if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "WRT610N") && !strcmp(getvar("boot_hw_ver"), "2.0"))
+ return &platforms[WRT610NV2];
+ }
+
+ if (startswith(getvar("pmon_ver"), "CFE")) {
+ /* CFE based - newer hardware */
+ if (!strcmp(boardnum, "42")) { /* Linksys */
+ if (!strcmp(boardtype, "0x478") && !strcmp(getvar("boot_hw_model"), "WRT300N") && !strcmp(getvar("boot_hw_ver"), "1.1"))
+ return &platforms[WRT300NV11];
+
+ if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
+ return &platforms[WRT350N];
+
+ if (!strcmp(boardtype, "0x0101") && !strcmp(getvar("boot_ver"), "v3.6"))
+ return &platforms[WRT54G3G];
+
+ if (!strcmp(boardtype, "0x042f") && !strcmp(getvar("model_name"), "WRT54G3GV2-VF"))
+ return &platforms[WRT54G3GV2_VF];
+
+ if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
+ return &platforms[WRTSL54GS];
+
+ if (!strcmp(boardtype, "0x0472")) {
+ if(!strcmp(getvar("boot_hw_model"), "WRT150N")) {
+ if(!strcmp(getvar("boot_hw_ver"), "1"))
+ return &platforms[WRT150NV1];
+ else if(!strcmp(getvar("boot_hw_ver"), "1.1"))
+ return &platforms[WRT150NV11];
+ }
+ else if(!strcmp(getvar("boot_hw_model"), "WRT160N")) {
+ if(!strcmp(getvar("boot_hw_ver"), "1.0"))
+ return &platforms[WRT160NV1];
+ else if(!strcmp(getvar("boot_hw_ver"), "3.0"))
+ return &platforms[WRT160NV3];
+ }
+ }
+
+ /* default to WRT54G */
+ return &platforms[WRT54G];
+ }
+ if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446"))
+ return &platforms[WAP54GV2];
+
+ if (!strcmp(boardnum, "8") && !strcmp(boardtype, "0x048e"))
+ return &platforms[WL1600GL];
+
+
+ if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
+ if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))
+ return &platforms[TM2300V2]; /* Dell TrueMobile 2300 v2 */
+ }
+
+ if (!strcmp(boardnum, "45")) { /* ASUS */
+ if (!strcmp(boardtype,"0x042f"))
+ return &platforms[WL500GP];
+ else if (!strcmp(boardtype,"0x0472"))
+ return &platforms[WL500W];
+ else if (!strcmp(boardtype,"0x467"))
+ return &platforms[WL320GE];
+ else
+ return &platforms[WL500GD];
+ }
+
+ if (!strcmp(boardnum, "10496"))
+ return &platforms[USR5461];
+
+ if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */
+ return &platforms[SE505V2];
+
+ if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") &&
+ !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
+ return &platforms[DIR320];
+
+ if (!strncmp(boardnum, "TH",2) && !strcmp(boardtype,"0x042f")) {
+ return &platforms[WDNetCenter];
+ }
+
+ if (!strcmp(boardtype,"0x0472") && !strcmp(getvar("cardbus"), "1")) { /* Netgear WNR834B V1 and V2*/
+ if (!strcmp(boardnum, "08") || !strcmp(boardnum, "8"))
+ return &platforms[WNR834BV1];
+ if (!strcmp(boardnum, "01") || !strcmp(boardnum, "1"))
+ return &platforms[WNR834BV2];
+ }
+
+ } else { /* PMON based - old stuff */
+ if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
+ (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
+ return &platforms[WR850GV1];
+ }
+ if (startswith(boardtype, "bcm94710dev")) {
+ if (!strcmp(boardnum, "42"))
+ return &platforms[WRT54GV1];
+ if (simple_strtoul(boardnum, NULL, 0) == 2)
+ return &platforms[WAP54GV1];
+ }
+ /* MN-700 has also hardware_version 'WL500-...', so use boardnum */
+ if (startswith(getvar("hardware_version"), "WL500-")) {
+ if (!strcmp(getvar("boardnum"), "mn700"))
+ return &platforms[MN700];
+ else
+ return &platforms[WL500G];
+ }
+ if (startswith(getvar("hardware_version"), "WL300-")) {
+ /* Either WL-300g or WL-HDD, do more extensive checks */
+ if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
+ (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 1))
+ return &platforms[WLHDD];
+ if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
+ (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 10))
+ return &platforms[WL300G];
+ }
+ /* Sitecom WL-105b */
+ if (startswith(boardnum, "2") && simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 1)
+ return &platforms[WL105B];
+
+ /* unknown asus stuff, probably bcm4702 */
+ if (startswith(boardnum, "asusX"))
+ return &platforms[ASUS_4702];
+
+ /* bcm4702 based Askey RT210W clones, Including:
+ * Askey RT210W (duh?)
+ * Siemens SE505v1
+ * Belkin F5D7230-4 before version v1444 (MiniPCI slot, not integrated)
+ */
+ if (!strcmp(boardtype,"bcm94710r4")
+ && !strcmp(boardnum ,"100")
+ && !strcmp(getvar("pmon_ver"),"v1.03.12.bk")
+ ){
+ return &platforms[RT210W];
+ }
+ }
+
+ if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
+ if (startswith(boardtype, "bcm94710ap"))
+ return &platforms[BUFFALO_UNKNOWN_4710];
+ else
+ return &platforms[BUFFALO_UNKNOWN];
+ }
+
+ if (startswith(getvar("CFEver"), "MotoWRv2") ||
+ startswith(getvar("CFEver"), "MotoWRv3") ||
+ !strcmp(getvar("MOTO_BOARD_TYPE"), "WR_FEM1")) {
+
+ return &platforms[WR850GV2V3];
+ }
+
+ if (!strcmp(boardnum, "44") && !strcmp(getvar("boardflags"),"0x0388")) { /* Trendware TEW-411BRP+ */
+ return &platforms[TEW411BRPP];
+ }
+
+ if (startswith(boardnum, "04FN")) /* SimpleTech SimpleShare */
+ return &platforms[STI_NAS];
+
+ if (!strcmp(boardnum, "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */
+ return &platforms[DWL3150];
+
+ if (!strcmp(boardnum, "01") && !strcmp(boardtype, "0x048e") && /* Edimax PS1208MFG */
+ !strcmp(getvar("status_gpio"), "1")) /* gpio based detection */
+ return &platforms[PS1208MFG];
+
+ /* not found */
+ return NULL;
+}
+
+static inline void ssb_maskset32(struct ssb_device *dev,
+ u16 offset, u32 mask, u32 set)
+{
+ ssb_write32(dev, offset, (ssb_read32(dev, offset) & mask) | set);
+}
+
+static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
+{
+ int irq;
+
+ irq = gpio_to_irq(0);
+ if (irq == -EINVAL) return;
+
+ if (enabled) {
+ if (request_irq(irq, handler, IRQF_SHARED, "gpio", handler))
+ return;
+ } else {
+ free_irq(irq, handler);
+ }
+
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ if (bcm47xx_bus.ssb.chipco.dev)
+ ssb_maskset32(bcm47xx_bus.ssb.chipco.dev, SSB_CHIPCO_IRQMASK, ~SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
+ break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ if (bcm47xx_bus.bcma.bus.drv_cc.core)
+ bcma_maskset32(bcm47xx_bus.bcma.bus.drv_cc.core, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO, (enabled ? BCMA_CC_IRQ_GPIO : 0));
+ break;
+#endif
+ }
+}
+
+static void register_buttons(struct button_t *b)
+{
+ for (; b->name; b++)
+ platform.button_mask |= b->gpio;
+
+ platform.button_mask &= ~gpiomask;
+
+ bcm47xx_gpio_outen(platform.button_mask, 0);
+ bcm47xx_gpio_control(platform.button_mask, 0);
+ platform.button_polarity = bcm47xx_gpio_in(~0) & platform.button_mask;
+ bcm47xx_gpio_polarity(platform.button_mask, platform.button_polarity);
+ bcm47xx_gpio_intmask(platform.button_mask, platform.button_mask);
+
+ gpio_set_irqenable(1, button_handler);
+}
+
+static void unregister_buttons(struct button_t *b)
+{
+ bcm47xx_gpio_intmask(platform.button_mask, 0);
+
+ gpio_set_irqenable(0, button_handler);
+}
+
+
+static void add_msg(struct event_t *event, char *msg, int argv)
+{
+ char *s;
+
+ if (argv)
+ return;
+
+ s = skb_put(event->skb, strlen(msg) + 1);
+ strcpy(s, msg);
+}
+
+static void hotplug_button(struct work_struct *work)
+{
+ struct event_t *event = container_of(work, struct event_t, wq);
+ char *s;
+
+ event->skb = alloc_skb(2048, GFP_KERNEL);
+
+ s = skb_put(event->skb, strlen(event->action) + 2);
+ sprintf(s, "%s@", event->action);
+ fill_event(event);
+
+ NETLINK_CB(event->skb).dst_group = 1;
+ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
+
+ kfree(event);
+}
+
+
+static int fill_event (struct event_t *event)
+{
+ static char buf[128];
+
+ add_msg(event, "HOME=/", 0);
+ add_msg(event, "PATH=/sbin:/bin:/usr/sbin:/usr/bin", 0);
+ add_msg(event, "SUBSYSTEM=button", 0);
+ snprintf(buf, 128, "ACTION=%s", event->action);
+ add_msg(event, buf, 0);
+ snprintf(buf, 128, "BUTTON=%s", event->name);
+ add_msg(event, buf, 0);
+ snprintf(buf, 128, "SEEN=%ld", event->seen);
+ add_msg(event, buf, 0);
+ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
+ add_msg(event, buf, 0);
+
+ return 0;
+}
+
+
+static irqreturn_t button_handler(int irq, void *dev_id)
+{
+ struct button_t *b;
+ u32 in, changed;
+
+ in = bcm47xx_gpio_in(~0) & platform.button_mask;
+ bcm47xx_gpio_polarity(platform.button_mask, in);
+ changed = platform.button_polarity ^ in;
+ platform.button_polarity = in;
+
+ changed &= ~bcm47xx_gpio_outen(0, 0);
+
+ for (b = platform.buttons; b->name; b++) {
+ struct event_t *event;
+
+ if (!(b->gpio & changed)) continue;
+
+ b->pressed ^= 1;
+
+ if ((event = (struct event_t *)kzalloc (sizeof(struct event_t), GFP_ATOMIC))) {
+ event->seen = (jiffies - b->seen)/HZ;
+ event->name = b->name;
+ event->action = b->pressed ? "pressed" : "released";
+ INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
+ schedule_work(&event->wq);
+ }
+
+ b->seen = jiffies;
+ }
+ return IRQ_HANDLED;
+}
+
+static void register_leds(struct led_t *l)
+{
+ struct proc_dir_entry *p;
+ u32 mask = 0;
+ u32 oe_mask = 0;
+ u32 val = 0;
+
+ leds = proc_mkdir("led", diag);
+ if (!leds)
+ return;
+
+ for(; l->name; l++) {
+ if (l->gpio & gpiomask)
+ continue;
+
+ if (l->gpio & GPIO_TYPE_EXTIF) {
+ l->state = 0;
+ set_led_extif(l);
+ } else {
+ if (l->polarity != INPUT) oe_mask |= l->gpio;
+ mask |= l->gpio;
+ val |= (l->polarity == NORMAL)?0:l->gpio;
+ }
+
+ if (l->polarity == INPUT) continue;
+
+ if ((p = create_proc_entry(l->name, S_IRUSR, leds))) {
+ l->proc.type = PROC_LED;
+ l->proc.ptr = l;
+ p->data = (void *) &l->proc;
+ p->proc_fops = &diag_proc_fops;
+ }
+ }
+
+ bcm47xx_gpio_outen(mask, oe_mask);
+ bcm47xx_gpio_control(mask, 0);
+ bcm47xx_gpio_out(mask, val);
+ bcm47xx_gpio_intmask(mask, 0);
+}
+
+static void unregister_leds(struct led_t *l)
+{
+ for(; l->name; l++)
+ remove_proc_entry(l->name, leds);
+
+ remove_proc_entry("led", diag);
+}
+
+static void set_led_extif(struct led_t *led)
+{
+ volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (led->gpio & ~GPIO_TYPE_MASK);
+ if (led->state)
+ *addr = 0xFF;
+ else
+ *addr;
+}
+
+static void led_flash(unsigned long dummy) {
+ struct led_t *l;
+ u32 mask = 0;
+ u8 extif_blink = 0;
+
+ for (l = platform.leds; l->name; l++) {
+ if (l->flash) {
+ if (l->gpio & GPIO_TYPE_EXTIF) {
+ extif_blink = 1;
+ l->state = !l->state;
+ set_led_extif(l);
+ } else {
+ mask |= l->gpio;
+ }
+ }
+ }
+
+ mask &= ~gpiomask;
+ if (mask) {
+ u32 val = ~bcm47xx_gpio_in(~0);
+
+ bcm47xx_gpio_outen(mask, mask);
+ bcm47xx_gpio_control(mask, 0);
+ bcm47xx_gpio_out(mask, val);
+ }
+ if (mask || extif_blink) {
+ mod_timer(&led_timer, jiffies + FLASH_TIME);
+ }
+}
+
+static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+{
+ struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
+ char *page;
+ int len = 0;
+
+ if ((page = kmalloc(1024, GFP_KERNEL)) == NULL)
+ return -ENOBUFS;
+
+ if (dent->data != NULL) {
+ struct prochandler_t *handler = (struct prochandler_t *) dent->data;
+ switch (handler->type) {
+ case PROC_LED: {
+ struct led_t * led = (struct led_t *) handler->ptr;
+ if (led->flash) {
+ len = sprintf(page, "f\n");
+ } else {
+ if (led->gpio & GPIO_TYPE_EXTIF) {
+ len = sprintf(page, "%d\n", led->state);
+ } else {
+ u32 in = (bcm47xx_gpio_in(~0) & led->gpio ? 1 : 0);
+ u8 p = (led->polarity == NORMAL ? 0 : 1);
+ len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
+ }
+ }
+ break;
+ }
+ case PROC_MODEL:
+ len = sprintf(page, "%s\n", platform.name);
+ break;
+ case PROC_GPIOMASK:
+ len = sprintf(page, "0x%04x\n", gpiomask);
+ break;
+ }
+ }
+ len += 1;
+
+ if (*ppos < len) {
+ len = min_t(int, len - *ppos, count);
+ if (copy_to_user(buf, (page + *ppos), len)) {
+ kfree(page);
+ return -EFAULT;
+ }
+ *ppos += len;
+ } else {
+ len = 0;
+ }
+
+ kfree(page);
+ return len;
+}
+
+
+static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
+{
+ struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
+ char *page;
+ int ret = -EINVAL;
+
+ if ((page = kmalloc(count + 1, GFP_KERNEL)) == NULL)
+ return -ENOBUFS;
+
+ if (copy_from_user(page, buf, count)) {
+ kfree(page);
+ return -EINVAL;
+ }
+ page[count] = 0;
+
+ if (dent->data != NULL) {
+ struct prochandler_t *handler = (struct prochandler_t *) dent->data;
+ switch (handler->type) {
+ case PROC_LED: {
+ struct led_t *led = (struct led_t *) handler->ptr;
+ int p = (led->polarity == NORMAL ? 0 : 1);
+
+ if (page[0] == 'f') {
+ led->flash = 1;
+ led_flash(0);
+ } else {
+ led->flash = 0;
+ if (led->gpio & GPIO_TYPE_EXTIF) {
+ led->state = p ^ ((page[0] == '1') ? 1 : 0);
+ set_led_extif(led);
+ } else {
+ bcm47xx_gpio_outen(led->gpio, led->gpio);
+ bcm47xx_gpio_control(led->gpio, 0);
+ bcm47xx_gpio_out(led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));
+ }
+ }
+ break;
+ }
+ case PROC_GPIOMASK:
+ gpiomask = simple_strtoul(page, NULL, 0);
+
+ if (platform.buttons) {
+ unregister_buttons(platform.buttons);
+ register_buttons(platform.buttons);
+ }
+
+ if (platform.leds) {
+ unregister_leds(platform.leds);
+ register_leds(platform.leds);
+ }
+ break;
+ }
+ ret = count;
+ }
+
+ kfree(page);
+ return ret;
+}
+
+static int __init diag_init(void)
+{
+ static struct proc_dir_entry *p;
+ static struct platform_t *detected;
+
+ detected = platform_detect();
+ if (!detected) {
+ printk(MODULE_NAME ": Router model not detected.\n");
+ return -ENODEV;
+ }
+ memcpy(&platform, detected, sizeof(struct platform_t));
+
+ printk(MODULE_NAME ": Detected '%s'\n", platform.name);
+ if (platform.platform_init != NULL) {
+ platform.platform_init();
+ }
+
+ if (!(diag = proc_mkdir("diag", NULL))) {
+ printk(MODULE_NAME ": proc_mkdir on /proc/diag failed\n");
+ return -EINVAL;
+ }
+
+ if ((p = create_proc_entry("model", S_IRUSR, diag))) {
+ p->data = (void *) &proc_model;
+ p->proc_fops = &diag_proc_fops;
+ }
+
+ if ((p = create_proc_entry("gpiomask", S_IRUSR | S_IWUSR, diag))) {
+ p->data = (void *) &proc_gpiomask;
+ p->proc_fops = &diag_proc_fops;
+ }
+
+ if (platform.buttons)
+ register_buttons(platform.buttons);
+
+ if (platform.leds)
+ register_leds(platform.leds);
+
+ return 0;
+}
+
+static void __exit diag_exit(void)
+{
+ del_timer(&led_timer);
+
+ if (platform.buttons)
+ unregister_buttons(platform.buttons);
+
+ if (platform.leds)
+ unregister_leds(platform.leds);
+
+ remove_proc_entry("model", diag);
+ remove_proc_entry("gpiomask", diag);
+ remove_proc_entry("diag", NULL);
+}
+
+module_init(diag_init);
+module_exit(diag_exit);
+
+MODULE_AUTHOR("Mike Baker, Felix Fietkau / OpenWrt.org");
+MODULE_LICENSE("GPL");
diff --git a/package/broadcom-diag/src/diag.h b/package/broadcom-diag/src/diag.h
new file mode 100644
index 000000000..698c37651
--- /dev/null
+++ b/package/broadcom-diag/src/diag.h
@@ -0,0 +1,134 @@
+/*
+ * diag.h - GPIO interface driver for Broadcom boards
+ *
+ * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
+ * Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/irq.h>
+#define MODULE_NAME "diag"
+
+#define MAX_GPIO 16
+#define FLASH_TIME HZ/6
+
+enum polarity_t {
+ REVERSE = 0,
+ NORMAL = 1,
+ INPUT = 2,
+};
+
+enum {
+ PROC_BUTTON,
+ PROC_LED,
+ PROC_MODEL,
+ PROC_GPIOMASK
+};
+
+struct prochandler_t {
+ int type;
+ void *ptr;
+};
+
+struct button_t {
+ struct prochandler_t proc;
+ char *name;
+ u32 gpio;
+ unsigned long seen;
+ u8 pressed;
+};
+
+struct led_t {
+ struct prochandler_t proc;
+ char *name;
+ u32 gpio;
+ u8 polarity;
+ u8 flash;
+ u8 state;
+};
+
+struct platform_t {
+ char *name;
+
+ struct button_t buttons[MAX_GPIO];
+ u32 button_mask;
+ u32 button_polarity;
+ void (*platform_init)(void);
+
+ struct led_t leds[MAX_GPIO];
+};
+
+struct event_t {
+ struct work_struct wq;
+ unsigned long seen;
+ char *name, *action;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
+ struct sk_buff *skb;
+#else
+ char *scratch;
+ char *argv[4];
+ char *envp[7];
+ u8 enr, anr;
+#endif
+};
+
+extern char *nvram_get(char *str);
+
+static struct platform_t platform;
+
+/* buttons */
+
+static void register_buttons(struct button_t *b);
+static void unregister_buttons(struct button_t *b);
+
+static void hotplug_button(struct work_struct *work);
+static irqreturn_t button_handler(int irq, void *dev_id);
+
+/* leds */
+
+static void register_leds(struct led_t *l);
+static void unregister_leds(struct led_t *l);
+
+static void set_led_extif(struct led_t *led);
+static void led_flash(unsigned long dummy);
+
+/* 2.4 compatibility */
+#ifndef TIMER_INITIALIZER
+#define TIMER_INITIALIZER(_function, _expires, _data) \
+ { \
+ /* _expires and _data currently unused */ \
+ function: _function \
+ }
+#endif
+
+static struct timer_list led_timer = TIMER_INITIALIZER(&led_flash, 0, 0);
+
+/* proc */
+
+static struct proc_dir_entry *diag, *leds;
+
+static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos);
+static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos);
+
+static struct file_operations diag_proc_fops = {
+ read: diag_proc_read,
+ write: diag_proc_write
+};
+
+static struct prochandler_t proc_model = { .type = PROC_MODEL };
+static struct prochandler_t proc_gpiomask = { .type = PROC_GPIOMASK };
+
diff --git a/package/broadcom-diag/src/gpio.h b/package/broadcom-diag/src/gpio.h
new file mode 100644
index 000000000..d0e3e06c8
--- /dev/null
+++ b/package/broadcom-diag/src/gpio.h
@@ -0,0 +1,16 @@
+#ifndef __DIAG_GPIO_H
+#define __DIAG_GPIO_H
+
+#include <linux/interrupt.h>
+#include <linux/ssb/ssb_embedded.h>
+#include <linux/gpio.h>
+#include <bcm47xx.h>
+
+#define EXTIF_ADDR 0x1f000000
+#define EXTIF_UART (EXTIF_ADDR + 0x00800000)
+
+#define GPIO_TYPE_NORMAL (0x0 << 24)
+#define GPIO_TYPE_EXTIF (0x1 << 24)
+#define GPIO_TYPE_MASK (0xf << 24)
+
+#endif /* __DIAG_GPIO_H */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 19:38:49 +0000