diff options
| -rw-r--r-- | target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch | 42 |
1 files changed, 16 insertions, 26 deletions
diff --git a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch index 34e39e375..97d8b539b 100644 --- a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch +++ b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch @@ -63,7 +63,7 @@ }; static struct gpio_keys_button db120_gpio_keys[] __initdata = { -@@ -76,66 +93,101 @@ static struct gpio_keys_button db120_gpi +@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi }, }; @@ -111,47 +111,36 @@ -#ifdef CONFIG_PCI -static struct ath9k_platform_data db120_ath9k_data; -+static struct mdio_board_info db120_mdio0_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 0, -+ .platform_data = &db120_ar8327_data, -+ }, -+}; - +- -static int db120_pci_plat_dev_init(struct pci_dev *dev) -+static void __init db120_gmac_setup(void) - { +-{ - switch (PCI_SLOT(dev->devfn)) { - case 0: - dev->dev.platform_data = &db120_ath9k_data; - break; - } -+ void __iomem *base; -+ u32 t; - +- - return 0; -} -+ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE); - +- -static void __init db120_pci_init(u8 *eeprom) -{ - memcpy(db120_ath9k_data.eeprom_data, eeprom, - sizeof(db120_ath9k_data.eeprom_data)); -+ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); -+ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 | -+ AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); -+ t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE; -+ -+ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); - +- - ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); - ath79_register_pci(); -+ iounmap(base); - } +-} -#else -static inline void db120_pci_init(void) {} -#endif /* CONFIG_PCI */ ++static struct mdio_board_info db120_mdio0_info[] = { ++ { ++ .bus_id = "ag71xx-mdio.0", ++ .phy_addr = 0, ++ .platform_data = &db120_ar8327_data, ++ }, ++}; static void __init db120_setup(void) { @@ -172,7 +161,8 @@ - db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); + ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL); + -+ db120_gmac_setup(); ++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | ++ AR934X_ETH_CFG_SW_ONLY_MODE); + + ath79_register_mdio(1, 0x0); + ath79_register_mdio(0, 0x0); |