aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ubicom32/patches-2.6.30/100-ubicom32_support.patch
diff options
context:
space:
mode:
authorblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>2012-10-05 10:12:53 +0000
committerblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>2012-10-05 10:12:53 +0000
commit5c105d9f3fd086aff195d3849dcf847d6b0bd927 (patch)
tree1229a11f725bfa58aa7c57a76898553bb5f6654a /target/linux/ubicom32/patches-2.6.30/100-ubicom32_support.patch
downloadopenwrt-5c105d9f3fd086aff195d3849dcf847d6b0bd927.tar.gz
openwrt-5c105d9f3fd086aff195d3849dcf847d6b0bd927.zip
branch Attitude Adjustment
git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ubicom32/patches-2.6.30/100-ubicom32_support.patch')
-rw-r--r--target/linux/ubicom32/patches-2.6.30/100-ubicom32_support.patch1741
1 files changed, 1741 insertions, 0 deletions
diff --git a/target/linux/ubicom32/patches-2.6.30/100-ubicom32_support.patch b/target/linux/ubicom32/patches-2.6.30/100-ubicom32_support.patch
new file mode 100644
index 000000000..eca2740a8
--- /dev/null
+++ b/target/linux/ubicom32/patches-2.6.30/100-ubicom32_support.patch
@@ -0,0 +1,1741 @@
+--- a/drivers/char/hw_random/Kconfig
++++ b/drivers/char/hw_random/Kconfig
+@@ -148,3 +148,16 @@ config HW_RANDOM_VIRTIO
+
+ To compile this driver as a module, choose M here: the
+ module will be called virtio-rng. If unsure, say N.
++
++config HW_RANDOM_UBICOM32
++ tristate "Ubicom32 HW Random Number Generator support"
++ depends on HW_RANDOM && UBICOM32
++ default HW_RANDOM
++ ---help---
++ This driver provides kernel-side support for the Random Number
++ Generator hardware found on Ubicom32 processors.
++
++ To compile this driver as a module, choose M here: the
++ module will be called pasemi-rng.
++
++ If unsure, say Y.
+--- a/drivers/char/hw_random/Makefile
++++ b/drivers/char/hw_random/Makefile
+@@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx
+ obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
+ obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
+ obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
++obj-$(CONFIG_HW_RANDOM_UBICOM32) += ubicom32-rng.o
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -61,6 +61,40 @@ config CRYPTO_DEV_GEODE
+ To compile this driver as a module, choose M here: the module
+ will be called geode-aes.
+
++config CRYPTO_UBICOM32
++ bool "Ubicom32 Security Module"
++ depends on UBICOM32
++ help
++ This is the ubicom32 hardware acceleration common code.
++
++config CRYPTO_AES_UBICOM32
++ tristate "Ubicom32 AES implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware AES implementation.
++
++config CRYPTO_DES_UBICOM32
++ tristate "Ubicom32 DES implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware DES and 3DES implementation.
++
++config CRYPTO_SHA1_UBICOM32
++ tristate "Ubicom32 SHA1 implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware SHA1 implementation.
++
++config CRYPTO_MD5_UBICOM32
++ tristate "Ubicom32 MD5 implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware MD5 implementation.
++
+ config ZCRYPT
+ tristate "Support for PCI-attached cryptographic adapters"
+ depends on S390
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -266,3 +266,10 @@ config GPIOMMC_CONFIGFS
+ help
+ This option automatically enables configfs support for gpiommc
+ if configfs is available.
++
++config MMC_UBICOM32
++ tristate "Ubicom32 MMC/SD host controller"
++ depends on UBICOM32
++ help
++ This provides support for the SD/MMC hardware found on Ubicom32
++ IP7K processors
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -30,4 +30,5 @@ obj-$(CONFIG_MMC_S3C) += s3cmci.o
+ obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
+ obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
+ obj-$(CONFIG_GPIOMMC) += gpiommc.o
++obj-$(CONFIG_MMC_UBICOM32) += ubicom32sd.o
+
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -104,6 +104,31 @@ config M25PXX_USE_FAST_READ
+ help
+ This option enables FAST_READ access supported by ST M25Pxx.
+
++config MTD_UBI32_NAND_SPI_ER
++ tristate "UBI32_NAND SPI-ER support"
++ help
++ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
++ using the built in flash controller on the Ubicom32 architecture.
++ Partial page writes are not supported by this driver.
++
++config MTD_NAND_SPI_ER
++ tristate "NAND SPI-ER support"
++ help
++ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
++ using a generic SPI bus. Partial page writes are supported
++ by this driver.
++
++config MTD_UBI32_M25P80
++ tristate "Ubicom processor support for most SPI Flash chips (AT26DF, M25P, W25X, ...)"
++ depends on UBICOM32
++ default y
++ help
++ This enables access to most modern SPI flash chips, used for
++ program and data storage. Series supported include Atmel AT26DF,
++ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
++ are supported as well. See the driver source for the current list,
++ or to add other chips.
++
+ config MTD_SLRAM
+ tristate "Uncached system RAM"
+ help
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
+@@ -16,3 +16,6 @@ obj-$(CONFIG_MTD_LART) += lart.o
+ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80) += m25p80.o
++obj-$(CONFIG_MTD_UBI32_M25P80) += ubi32-m25p80.o
++obj-$(CONFIG_MTD_NAND_SPI_ER) += nand-spi-er.o
++obj-$(CONFIG_MTD_UBI32_NAND_SPI_ER) += ubi32-nand-spi-er.o
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2540,6 +2540,19 @@ config JME
+ To compile this driver as a module, choose M here. The module
+ will be called jme.
+
++config UBICOM32_GMAC
++ tristate "Ubicom Gigabit Ethernet support"
++ depends on UBICOM32
++ help
++ Gigabit Ethernet support for ubicom32 processors
++
++config UBICOM32_OCM_FOR_SKB
++ bool "USE OCM for SKB (EXPERIMENTAL)"
++ depends on UBICOM32_GMAC
++ default n
++ help
++ Allocate skb from OCM for Ethernet Receive when possible
++
+ endif # NETDEV_1000
+
+ #
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -272,3 +272,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
+ obj-$(CONFIG_SFC) += sfc/
+
+ obj-$(CONFIG_WIMAX) += wimax/
++
++obj-$(CONFIG_UBICOM32_GMAC) += ubi32-eth.o
+--- a/drivers/net/usb/asix.c
++++ b/drivers/net/usb/asix.c
+@@ -319,14 +319,33 @@ static int asix_rx_fixup(struct usbnet *
+ /* get the packet length */
+ size = (u16) (header & 0x0000ffff);
+
+- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
++ if ((skb->len) - ((size + 1) & 0xfffe) == 0) {
++#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (((u32)packet & 0x02) == 0) {
++ memmove(packet - 2, packet, size);
++ skb->data -= 2;
++ skb->tail -= 2;
++ }
++#endif
+ return 2;
++ }
++
+ if (size > ETH_FRAME_LEN) {
+ deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
+ return 0;
+ }
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (ax_skb) {
++#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (((u32)packet & 0x02) == 0) {
++ memmove(packet - 2, packet, size);
++ ax_skb->data = packet - 2;
++ } else {
++ ax_skb->data = packet;
++ }
++#else
++ ax_skb->data = packet;
++#endif
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ skb_set_tail_pointer(ax_skb, size);
+@@ -1125,13 +1144,19 @@ static int ax88178_link_reset(struct usb
+ mode = AX88178_MEDIUM_DEFAULT;
+
+ if (ecmd.speed == SPEED_1000)
++#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ mode |= AX_MEDIUM_GM;
++#else
++ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
++#endif
+ else if (ecmd.speed == SPEED_100)
+ mode |= AX_MEDIUM_PS;
+ else
+ mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+
++#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ mode |= AX_MEDIUM_ENCK;
++#endif
+
+ if (ecmd.duplex == DUPLEX_FULL)
+ mode |= AX_MEDIUM_FD;
+--- a/drivers/oprofile/cpu_buffer.c
++++ b/drivers/oprofile/cpu_buffer.c
+@@ -328,10 +328,10 @@ static inline void oprofile_end_trace(st
+ }
+
+ static inline void
+-__oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+- unsigned long event, int is_kernel)
++__oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
++ unsigned long event, int is_kernel, int cpu)
+ {
+- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
++ struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu);
+ unsigned long backtrace = oprofile_backtrace_depth;
+
+ /*
+@@ -353,7 +353,8 @@ __oprofile_add_ext_sample(unsigned long
+ void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+ unsigned long event, int is_kernel)
+ {
+- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
++ __oprofile_add_ext_sample_cpu(pc, regs, event,
++ is_kernel, smp_processor_id());
+ }
+
+ void oprofile_add_sample(struct pt_regs * const regs, unsigned long event)
+@@ -361,7 +362,8 @@ void oprofile_add_sample(struct pt_regs
+ int is_kernel = !user_mode(regs);
+ unsigned long pc = profile_pc(regs);
+
+- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
++ __oprofile_add_ext_sample_cpu(pc, regs, event,
++ is_kernel, smp_processor_id());
+ }
+
+ /*
+--- a/drivers/pci/Makefile
++++ b/drivers/pci/Makefile
+@@ -44,8 +44,8 @@ obj-$(CONFIG_PPC) += setup-bus.o
+ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
+ obj-$(CONFIG_X86_VISWS) += setup-irq.o
+ obj-$(CONFIG_MN10300) += setup-bus.o
++obj-$(CONFIG_UBICOM32) += setup-bus.o setup-irq.o
+
+-#
+ # ACPI Related PCI FW Functions
+ #
+ obj-$(CONFIG_ACPI) += pci-acpi.o
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -871,6 +871,57 @@ config SERIAL_UARTLITE_CONSOLE
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
++config SERIAL_UBI32_UARTTIO
++ tristate "Ubicom UARTTIO support"
++ depends on UBICOM32=y
++ select SERIAL_CORE
++ default y
++ help
++ Add support for the Ubicom virtual peripherial serial interface.
++
++config SERIAL_UBI32_UARTTIO_NR_UARTS
++ int "Maximum number of UARTTIO virtual serial ports"
++ depends on SERIAL_UBI32_UARTTIO
++ default "4"
++ help
++ Set this to the maximum number of serial ports you want the driver to support.
++
++config SERIAL_UBI32_UARTTIO_CONSOLE
++ tristate "Ubicom UARTTIO console support"
++ depends on SERIAL_UBI32_UARTTIO=y
++ select SERIAL_CORE_CONSOLE
++ default y
++ help
++ Add support for console on the Ubicom virtual peripherial serial interface.
++
++config SERIAL_UBI32_SERDES
++ bool "Ubicom serial port support"
++ depends on UBICOM32=y
++ select SERIAL_CORE
++ default y
++ help
++ Add support for the Ubicom serial interface.
++
++config SERIAL_UBI32_SERDES_CONSOLE
++ bool "Ubicom serial console support"
++ depends on SERIAL_UBI32_SERDES=y
++ select SERIAL_CORE_CONSOLE
++ default y
++
++config SERIAL_UBI32_MAILBOX
++ bool "Ubicom mailbox support"
++ depends on UBICOM32=y
++ select SERIAL_CORE
++ default n
++ help
++ Add support for the Ubicom mailbox interface.
++
++config SERIAL_UBI32_MAILBOX_CONSOLE
++ bool "Ubicom mailbox console support"
++ depends on SERIAL_UBI32_MAILBOX=y
++ select SERIAL_CORE_CONSOLE
++ default y
++
+ config SERIAL_SUNCORE
+ bool
+ depends on SPARC
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -77,3 +77,6 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIA
+ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
+ obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
++obj-$(CONFIG_SERIAL_UBI32_SERDES) += ubi32_serdes.o
++obj-$(CONFIG_SERIAL_UBI32_UARTTIO) += ubi32_uarttio.o
++obj-$(CONFIG_SERIAL_UBI32_MAILBOX) += ubi32_mailbox.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -196,6 +196,15 @@ config SPI_S3C24XX
+ help
+ SPI driver for Samsung S3C24XX series ARM SoCs
+
++config SPI_UBICOM32_GPIO
++ tristate "Ubicom32 SPI over GPIO"
++ depends on SPI_MASTER && UBICOM32 && EXPERIMENTAL
++ select SPI_BITBANG
++ select HAS_DMA
++ help
++ SPI driver for the Ubicom32 architecture using
++ GPIO lines to provide the SPI bus.
++
+ config SPI_S3C24XX_GPIO
+ tristate "Samsung S3C24XX series SPI by GPIO"
+ depends on ARCH_S3C2410 && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_SPI_ORION) += orion_spi.o
+ obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
+ obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
+ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
++obj-$(CONFIG_SPI_UBICOM32_GPIO) += spi_ubicom32_gpio.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
+ obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
+ obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
+--- a/drivers/uio/Kconfig
++++ b/drivers/uio/Kconfig
+@@ -89,4 +89,12 @@ config UIO_SERCOS3
+
+ If you compile this as a module, it will be called uio_sercos3.
+
++config UIO_UBICOM32RING
++ tristate "Ubicom32 Ring Buffer driver"
++ default n
++ help
++ Userspace I/O interface for a Ubicom32 Ring Buffer.
++
++ If you compile this as a module, it will be called uio_ubicom32ring
++
+ endif
+--- a/drivers/uio/Makefile
++++ b/drivers/uio/Makefile
+@@ -5,3 +5,4 @@ obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdr
+ obj-$(CONFIG_UIO_SMX) += uio_smx.o
+ obj-$(CONFIG_UIO_AEC) += uio_aec.o
+ obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
++obj-$(CONFIG_UIO_UBICOM32RING) += uio_ubicom32ring.o
+--- a/drivers/usb/gadget/epautoconf.c
++++ b/drivers/usb/gadget/epautoconf.c
+@@ -154,6 +154,10 @@ ep_matches (
+ /* configure your hardware with enough buffering!! */
+ }
+ break;
++
++ case USB_ENDPOINT_XFER_BULK:
++ if ((gadget->is_dualspeed) && (ep->maxpacket < 512))
++ return 0;
+ }
+
+ /* MATCH!! */
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
+ default y if PCMCIA && !M32R # sl811_cs
+ default y if ARM # SL-811
+ default y if SUPERH # r8a66597-hcd
++ default y if UBICOM32 # Ubicom's onchip USB Duial role controller
+ default PCI
+
+ # many non-PCI SOC chips embed OHCI
+--- a/drivers/usb/musb/Kconfig
++++ b/drivers/usb/musb/Kconfig
+@@ -12,7 +12,7 @@ config USB_MUSB_HDRC
+ depends on !SUPERH
+ select TWL4030_USB if MACH_OMAP_3430SDP
+ select USB_OTG_UTILS
+- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
++ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, Ubicom, ...)'
+ help
+ Say Y here if your system has a dual role high speed USB
+ controller based on the Mentor Graphics silicon IP. Then
+--- a/drivers/usb/musb/Makefile
++++ b/drivers/usb/musb/Makefile
+@@ -30,6 +30,10 @@ ifeq ($(CONFIG_BF52x),y)
+ musb_hdrc-objs += blackfin.o
+ endif
+
++ifeq ($(CONFIG_UBICOM32), y)
++ musb_hdrc-objs += ubi32_usb.o
++endif
++
+ ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
+ musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
+ endif
+--- a/drivers/usb/musb/musb_core.c
++++ b/drivers/usb/musb/musb_core.c
+@@ -105,6 +105,13 @@
+ #include <asm/mach-types.h>
+ #endif
+
++#ifdef CONFIG_UBICOM32
++#include <asm/ip5000.h>
++#include <asm/ubicom32-tio.h>
++extern void ubi32_usb_init(void);
++extern void ubi32_usb_int_clr(void);
++#endif
++
+ #include "musb_core.h"
+
+
+@@ -147,8 +154,37 @@ static inline struct musb *dev_to_musb(s
+ }
+
+ /*-------------------------------------------------------------------------*/
++#if defined(CONFIG_UBICOM32)
++
++/*
++ * Load an endpoint's FIFO
++ */
++void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *pSource)
++{
++ void __iomem *fifo = hw_ep->fifo;
++
++ prefetch((u8 *)pSource);
++
++ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
++ 'T', hw_ep->epnum, fifo, wCount, pSource);
++
++ usb_tio_write_fifo((u32)fifo, (u32)pSource, wCount);
++
++}
++
++/*
++ * Unload an endpoint's FIFO
++ */
++void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *pDest)
++{
++
++ void __iomem *fifo = hw_ep->fifo;
++ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
++ 'R', hw_ep->epnum, fifo, wCount, pDest);
++ usb_tio_read_fifo((u32)fifo, (u32)pDest, wCount);
++}
+
+-#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
++#elif !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
+
+ /*
+ * Load an endpoint's FIFO
+@@ -227,8 +263,7 @@ void musb_read_fifo(struct musb_hw_ep *h
+ readsb(fifo, dst, len);
+ }
+ }
+-
+-#endif /* normal PIO */
++#endif /* !T6010 && !BLACKFIN */
+
+
+ /*-------------------------------------------------------------------------*/
+@@ -874,12 +909,19 @@ void musb_start(struct musb *musb)
+ musb_writeb(regs, MUSB_TESTMODE, 0);
+
+ /* put into basic highspeed mode and start session */
++#ifndef CONFIG_UBICOM32
+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+ | MUSB_POWER_SOFTCONN
+ | MUSB_POWER_HSENAB
+ /* ENSUSPEND wedges tusb */
+ /* | MUSB_POWER_ENSUSPEND */
+ );
++#else
++ musb_writeb(regs, MUSB_POWER, MUSB_POWER_HSENAB
++ /* ENSUSPEND wedges tusb */
++ /* | MUSB_POWER_ENSUSPEND */
++ );
++#endif
+
+ musb->is_active = 0;
+ devctl = musb_readb(regs, MUSB_DEVCTL);
+@@ -1081,6 +1123,7 @@ static struct fifo_cfg __initdata mode_4
+ };
+
+
++#ifndef CONFIG_UBICOM32
+ /*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+@@ -1240,7 +1283,7 @@ static int __init ep_config_from_table(s
+
+ return 0;
+ }
+-
++#endif /* CONFIG_UBICOM32 */
+
+ /*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+@@ -1256,6 +1299,11 @@ static int __init ep_config_from_hw(stru
+ DBG(2, "<== static silicon ep config\n");
+
+ /* FIXME pick up ep0 maxpacket size */
++#ifdef CONFIG_UBICOM32
++ /* set ep0 to shared_fifo, otherwise urb will be put to out_qh but ep0_irq try to get the urb from in_qh*/
++ hw_ep = musb->endpoints;
++ hw_ep->is_shared_fifo = true;
++#endif
+
+ for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
+ musb_ep_select(mbase, epnum);
+@@ -1276,14 +1324,27 @@ static int __init ep_config_from_hw(stru
+ /* REVISIT: this algorithm is lazy, we should at least
+ * try to pick a double buffered endpoint.
+ */
++#ifndef CONFIG_UBICOM32
+ if (musb->bulk_ep)
+ continue;
+ musb->bulk_ep = hw_ep;
++#else
++ if ((musb->bulk_ep_in) && (musb->bulk_ep_out))
++ continue;
++ /* Save theEP with 1024 Bytes FIFO for ISO */
++ if(hw_ep->max_packet_sz_tx == 512) {
++ if (!musb->bulk_ep_in) {
++ musb->bulk_ep_in = hw_ep;
++ } else if (!musb->bulk_ep_out) {
++ musb->bulk_ep_out = hw_ep;
++ }
++ }
++#endif /* CONFIG_UBICOM32 */
+ #endif
+ }
+
+ #ifdef CONFIG_USB_MUSB_HDRC_HCD
+- if (!musb->bulk_ep) {
++ if ((!musb->bulk_ep_in) || (!musb->bulk_ep_out)) {
+ pr_debug("%s: missing bulk\n", musb_driver_name);
+ return -EINVAL;
+ }
+@@ -1393,12 +1454,16 @@ static int __init musb_core_init(u16 mus
+ musb->epmask = 1;
+
+ if (reg & MUSB_CONFIGDATA_DYNFIFO) {
++#ifndef CONFIG_UBICOM32
+ if (musb->config->dyn_fifo)
+ status = ep_config_from_table(musb);
+- else {
++ else
++#endif
++ {
+ ERR("reconfigure software for Dynamic FIFOs\n");
+ status = -ENODEV;
+ }
++
+ } else {
+ if (!musb->config->dyn_fifo)
+ status = ep_config_from_hw(musb);
+@@ -1462,8 +1527,8 @@ static int __init musb_core_init(u16 mus
+
+ /*-------------------------------------------------------------------------*/
+
+-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+-
++#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_UBICOM32)
++static u32_t musb_int_count = 0;
+ static irqreturn_t generic_interrupt(int irq, void *__hci)
+ {
+ unsigned long flags;
+@@ -1472,10 +1537,17 @@ static irqreturn_t generic_interrupt(int
+
+ spin_lock_irqsave(&musb->lock, flags);
+
++#ifndef CONFIG_UBICOM32
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
++#else
++ musb_read_int_status(&musb->int_usb, &musb->int_tx, &musb->int_rx);
++ //ubi32_usb_int_clr();
++ musb_int_count++;
++#endif
+
++ DBG(4, "usb %x, tx %x, rx %x", musb->int_usb, musb->int_tx, musb->int_rx);
+ if (musb->int_usb || musb->int_tx || musb->int_rx)
+ retval = musb_interrupt(musb);
+
+@@ -2210,6 +2282,10 @@ static struct platform_driver musb_drive
+
+ static int __init musb_init(void)
+ {
++#ifdef CONFIG_UBICOM32
++ ubi32_usb_init();
++#endif
++
+ #ifdef CONFIG_USB_MUSB_HDRC_HCD
+ if (usb_disabled())
+ return 0;
+--- a/drivers/usb/musb/musb_core.h
++++ b/drivers/usb/musb/musb_core.h
+@@ -326,7 +326,12 @@ struct musb {
+ * queue until it completes or NAKs too much; then we try the next
+ * endpoint.
+ */
++#ifdef CONFIG_UBICOM32
++ struct musb_hw_ep *bulk_ep_in;
++ struct musb_hw_ep *bulk_ep_out;
++#else
+ struct musb_hw_ep *bulk_ep;
++#endif
+
+ struct list_head control; /* of musb_qh */
+ struct list_head in_bulk; /* of musb_qh */
+--- a/drivers/usb/musb/musb_gadget.c
++++ b/drivers/usb/musb/musb_gadget.c
+@@ -432,7 +432,7 @@ void musb_g_tx(struct musb *musb, u8 epn
+ * probably rates reporting as a host error
+ */
+ if (csr & MUSB_TXCSR_P_SENTSTALL) {
+- csr |= MUSB_TXCSR_P_WZC_BITS;
++ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~MUSB_TXCSR_P_SENTSTALL;
+ musb_writew(epio, MUSB_TXCSR, csr);
+ if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+@@ -448,7 +448,7 @@ void musb_g_tx(struct musb *musb, u8 epn
+
+ if (csr & MUSB_TXCSR_P_UNDERRUN) {
+ /* we NAKed, no big deal ... little reason to care */
+- csr |= MUSB_TXCSR_P_WZC_BITS;
++ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~(MUSB_TXCSR_P_UNDERRUN
+ | MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR, csr);
+@@ -584,10 +584,16 @@ static void rxstate(struct musb *musb, s
+ u16 csr = 0;
+ const u8 epnum = req->epnum;
+ struct usb_request *request = &req->request;
+- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
++ struct musb_ep *musb_ep = NULL;
+ void __iomem *epio = musb->endpoints[epnum].regs;
+- unsigned fifo_count = 0;
+- u16 len = musb_ep->packet_sz;
++ u16 fifo_count = 0;
++ u16 len = 0;
++
++ if (musb->endpoints[epnum].is_shared_fifo)
++ musb_ep = &musb->endpoints[epnum].ep_in;
++ else
++ musb_ep = &musb->endpoints[epnum].ep_out;
++ len = musb_ep->packet_sz;
+
+ csr = musb_readw(epio, MUSB_RXCSR);
+
+@@ -726,7 +732,7 @@ static void rxstate(struct musb *musb, s
+ */
+
+ /* ack the read! */
+- csr |= MUSB_RXCSR_P_WZC_BITS;
++ csr &= ~MUSB_RXCSR_P_WZC_BITS;
+ csr &= ~MUSB_RXCSR_RXPKTRDY;
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
+@@ -745,10 +751,15 @@ void musb_g_rx(struct musb *musb, u8 epn
+ u16 csr;
+ struct usb_request *request;
+ void __iomem *mbase = musb->mregs;
+- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
++ struct musb_ep *musb_ep = NULL;
+ void __iomem *epio = musb->endpoints[epnum].regs;
+ struct dma_channel *dma;
+
++ if (musb->endpoints[epnum].is_shared_fifo)
++ musb_ep = &musb->endpoints[epnum].ep_in;
++ else
++ musb_ep = &musb->endpoints[epnum].ep_out;
++
+ musb_ep_select(mbase, epnum);
+
+ request = next_request(musb_ep);
+@@ -1769,7 +1780,9 @@ int usb_gadget_register_driver(struct us
+ }
+ }
+ }
+-
++#ifndef CONFIG_USB_MUSB_OTG
++ musb_pullup(musb, 1);
++#endif
+ return retval;
+ }
+ EXPORT_SYMBOL(usb_gadget_register_driver);
+--- a/drivers/usb/musb/musb_gadget_ep0.c
++++ b/drivers/usb/musb/musb_gadget_ep0.c
+@@ -240,14 +240,14 @@ __acquires(musb->lock)
+ case USB_REQ_SET_ADDRESS:
+ /* change it after the status stage */
+ musb->set_address = true;
+- musb->address = (u8) (ctrlrequest->wValue & 0x7f);
++ musb->address = (u8) (le16_to_cpu(ctrlrequest->wValue) & 0x7f);
+ handled = 1;
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ switch (recip) {
+ case USB_RECIP_DEVICE:
+- if (ctrlrequest->wValue
++ if (le16_to_cpu(ctrlrequest->wValue)
+ != USB_DEVICE_REMOTE_WAKEUP)
+ break;
+ musb->may_wakeup = 0;
+@@ -261,8 +261,8 @@ __acquires(musb->lock)
+
+ if (num == 0
+ || num >= MUSB_C_NUM_EPS
+- || ctrlrequest->wValue
+- != USB_ENDPOINT_HALT)
++ || le16_to_cpu(ctrlrequest->wValue
++ != USB_ENDPOINT_HALT))
+ break;
+
+ if (ctrlrequest->wIndex & USB_DIR_IN)
+@@ -292,7 +292,7 @@ __acquires(musb->lock)
+ switch (recip) {
+ case USB_RECIP_DEVICE:
+ handled = 1;
+- switch (ctrlrequest->wValue) {
++ switch (le16_to_cpu(ctrlrequest->wValue)) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ musb->may_wakeup = 1;
+ break;
+@@ -374,8 +374,8 @@ stall:
+
+ if (epnum == 0
+ || epnum >= MUSB_C_NUM_EPS
+- || ctrlrequest->wValue
+- != USB_ENDPOINT_HALT)
++ || le16_to_cpu(ctrlrequest->wValue
++ != USB_ENDPOINT_HALT))
+ break;
+
+ ep = musb->endpoints + epnum;
+--- a/drivers/usb/musb/musb_host.c
++++ b/drivers/usb/musb/musb_host.c
+@@ -160,7 +160,11 @@ static inline void musb_h_tx_start(struc
+ /* NOTE: no locks here; caller should lock and select EP */
+ if (ep->epnum) {
+ txcsr = musb_readw(ep->regs, MUSB_TXCSR);
++#ifndef CONFIG_UBICOM32
+ txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
++#else
++ txcsr |= (MUSB_TXCSR_TXPKTRDY & (~MUSB_TXCSR_H_WZC_BITS));
++#endif
+ musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+ } else {
+ txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+@@ -223,6 +227,8 @@ musb_start_urb(struct musb *musb, int is
+ break;
+ default: /* bulk, interrupt */
+ /* actual_length may be nonzero on retry paths */
++ if (urb->actual_length)
++ DBG(3 ,"musb_start_urb: URB %p retried, len: %d\n", urb, urb->actual_length);
+ buf = urb->transfer_buffer + urb->actual_length;
+ len = urb->transfer_buffer_length - urb->actual_length;
+ }
+@@ -342,13 +348,13 @@ musb_save_toggle(struct musb_hw_ep *ep,
+ if (!is_in) {
+ csr = musb_readw(epio, MUSB_TXCSR);
+ usb_settoggle(udev, qh->epnum, 1,
+- (csr & MUSB_TXCSR_H_DATATOGGLE)
+- ? 1 : 0);
++ ((csr & MUSB_TXCSR_H_DATATOGGLE)
++ ? 1 : 0));
+ } else {
+ csr = musb_readw(epio, MUSB_RXCSR);
+ usb_settoggle(udev, qh->epnum, 0,
+- (csr & MUSB_RXCSR_H_DATATOGGLE)
+- ? 1 : 0);
++ ((csr & MUSB_RXCSR_H_DATATOGGLE)
++ ? 1 : 0));
+ }
+ }
+
+@@ -556,7 +562,11 @@ musb_host_packet_rx(struct musb *musb, s
+ musb_read_fifo(hw_ep, length, buf);
+
+ csr = musb_readw(epio, MUSB_RXCSR);
++#ifndef CONFIG_UBICOM32
+ csr |= MUSB_RXCSR_H_WZC_BITS;
++#else
++ csr &= ~MUSB_RXCSR_H_WZC_BITS;
++#endif
+ if (unlikely(do_flush))
+ musb_h_flush_rxfifo(hw_ep, csr);
+ else {
+@@ -590,6 +600,7 @@ musb_rx_reinit(struct musb *musb, struct
+
+ /* if programmed for Tx, put it in RX mode */
+ if (ep->is_shared_fifo) {
++#ifndef CONFIG_UBICOM32
+ csr = musb_readw(ep->regs, MUSB_TXCSR);
+ if (csr & MUSB_TXCSR_MODE) {
+ musb_h_tx_flush_fifo(ep);
+@@ -604,7 +615,18 @@ musb_rx_reinit(struct musb *musb, struct
+ */
+ if (csr & MUSB_TXCSR_DMAMODE)
+ musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
++
++#else
++ /* clear mode (and everything else) to enable Rx */
+ musb_writew(ep->regs, MUSB_TXCSR, 0);
++ /* scrub all previous state, clearing toggle */
++ csr = musb_readw(ep->regs, MUSB_RXCSR);
++ if (csr & MUSB_RXCSR_RXPKTRDY)
++ WARNING("rx%d, packet/%d ready?\n", ep->epnum,
++ musb_readw(ep->regs, MUSB_RXCOUNT));
++
++ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
++#endif
+
+ /* scrub all previous state, clearing toggle */
+ } else {
+@@ -1138,8 +1160,18 @@ void musb_host_tx(struct musb *musb, u8
+ void __iomem *mbase = musb->mregs;
+ struct dma_channel *dma;
+
++#ifdef CONFIG_UBICOM32
++ if (hw_ep->is_shared_fifo) {
++ qh = hw_ep->in_qh;
++ }
++#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
++ printk(KERN_DEBUG "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
++ dma ? ", dma" : "");
++#endif
++#endif
+ urb = next_urb(qh);
+
++
+ musb_ep_select(mbase, epnum);
+ tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+@@ -1180,9 +1212,14 @@ void musb_host_tx(struct musb *musb, u8
+ * we have a candidate... NAKing is *NOT* an error
+ */
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_H_WZC_BITS
+ | MUSB_TXCSR_TXPKTRDY);
++#else
++ musb_writew(epio, MUSB_TXCSR,
++ MUSB_TXCSR_TXPKTRDY);
++#endif
+ return;
+ }
+
+@@ -1353,8 +1390,14 @@ void musb_host_tx(struct musb *musb, u8
+ qh->segsize = length;
+
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
++ musb_writew(epio, MUSB_TXCSR,
++ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
++#else
+ musb_writew(epio, MUSB_TXCSR,
+- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
++ MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
++#endif
++
+ }
+
+
+@@ -1414,7 +1457,11 @@ static void musb_bulk_rx_nak_timeout(str
+
+ /* clear nak timeout bit */
+ rx_csr = musb_readw(epio, MUSB_RXCSR);
++#ifndef CONFIG_UBICOM32
+ rx_csr |= MUSB_RXCSR_H_WZC_BITS;
++#else
++ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
++#endif
+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+@@ -1483,6 +1530,13 @@ void musb_host_rx(struct musb *musb, u8
+
+ pipe = urb->pipe;
+
++#ifdef CONFIG_UBICOM32
++#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
++ printk(KERN_DEBUG "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
++ xfer_len, dma ? ", dma" : "");
++#endif
++#endif
++
+ DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+ epnum, rx_csr, urb->actual_length,
+ dma ? dma->actual_len : 0);
+@@ -1521,8 +1575,15 @@ void musb_host_rx(struct musb *musb, u8
+ return;
+ }
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
+ rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
++#else
++ /* NEED TO EVALUATE CHANGE */
++ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
++ rx_csr &= ~MUSB_RXCSR_DATAERROR;
++// musb_writew(epio, MUSB_RXCSR, (~(MUSB_RXCSR_H_WZC_BITS))| MUSB_RXCSR_H_REQPKT);
++#endif
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+ goto finish;
+@@ -1579,8 +1640,13 @@ void musb_host_rx(struct musb *musb, u8
+ rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
+ musb_writew(epio, MUSB_RXCSR,
+ MUSB_RXCSR_H_WZC_BITS | rx_csr);
++#else
++ musb_writew(epio, MUSB_RXCSR,
++ (~MUSB_RXCSR_H_WZC_BITS) & rx_csr);
++#endif
+ }
+ #endif
+ if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+@@ -1610,7 +1676,7 @@ void musb_host_rx(struct musb *musb, u8
+ else
+ done = false;
+
+- } else {
++ } else {
+ /* done if urb buffer is full or short packet is recd */
+ done = (urb->actual_length + xfer_len >=
+ urb->transfer_buffer_length
+@@ -1823,7 +1889,11 @@ static int musb_schedule(
+ } else if (hw_ep->out_qh != NULL)
+ continue;
+
++#ifndef CONFIG_UBICOM32
+ if (hw_ep == musb->bulk_ep)
++#else
++ if ((hw_ep == musb->bulk_ep_in) || (hw_ep == musb->bulk_ep_out)) /* Ubicom */
++#endif
+ continue;
+
+ if (is_in)
+@@ -1836,7 +1906,14 @@ static int musb_schedule(
+ best_end = epnum;
+ }
+ }
++
++#ifdef CONFIG_UBICOM32
++ if (((best_diff >= qh->maxpacket)) && ((qh->type == USB_ENDPOINT_XFER_BULK) && (!is_in)))
++ best_end = -1;
++#endif
++
+ /* use bulk reserved ep1 if no other ep is free */
++#ifndef CONFIG_UBICOM32
+ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
+ hw_ep = musb->bulk_ep;
+ if (is_in)
+@@ -1858,6 +1935,22 @@ static int musb_schedule(
+ } else if (best_end < 0) {
+ return -ENOSPC;
+ }
++#else
++ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
++ /* hw_ep = musb->bulk_ep; */
++ if (is_in) {
++ head = &musb->in_bulk;
++ hw_ep = musb->bulk_ep_in; /* UBICOM */
++ }
++ else {
++ head = &musb->out_bulk;
++ hw_ep = musb->bulk_ep_out; /* UBICOM */
++ }
++ goto success;
++ } else if (best_end < 0) {
++ return -ENOSPC;
++ }
++#endif
+
+ idle = 1;
+ qh->mux = 0;
+@@ -1869,6 +1962,13 @@ success:
+ list_add_tail(&qh->ring, head);
+ qh->mux = 1;
+ }
++ /*
++ * It's not make sense to set NAK timeout when qh->mux = 0,
++ * There is nothing else to schedule
++ */
++ if ((qh->type == USB_ENDPOINT_XFER_BULK) && (qh->mux == 0))
++ qh->intv_reg = 0;
++
+ qh->hw_ep = hw_ep;
+ qh->hep->hcpriv = qh;
+ if (idle)
+@@ -1975,6 +2075,15 @@ static int musb_urb_enqueue(
+ /* ISO always uses logarithmic encoding */
+ interval = min_t(u8, epd->bInterval, 16);
+ break;
++#ifdef COMFIG_UBICOM32
++ case USB_ENDPOINT_XFER_BULK:
++ if (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
++ interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16: 2;
++ else
++ interval = 0;
++ break;
++#endif
++
+ default:
+ /* REVISIT we actually want to use NAK limits, hinting to the
+ * transfer scheduling logic to try some other qh, e.g. try
+--- a/drivers/usb/musb/musb_io.h
++++ b/drivers/usb/musb/musb_io.h
+@@ -58,6 +58,7 @@ static inline void writesb(const void __
+
+ #ifndef CONFIG_BLACKFIN
+
++#ifndef CONFIG_UBICOM32
+ /* NOTE: these offsets are all in bytes */
+
+ static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+@@ -72,7 +73,37 @@ static inline void musb_writew(void __io
+
+ static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+ { __raw_writel(data, addr + offset); }
++#else
++#include <asm/ubicom32-tio.h>
++static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
++{
++ u16 data;
++ usb_tio_read_u16((u32)(addr + offset), &data);
++ return data;
++}
+
++static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
++{
++ u8 data;
++ usb_tio_read_u8((u32)(addr + offset), &data);
++ return data;
++}
++
++static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
++{
++ usb_tio_write_u16((u32)(addr + offset), data);
++}
++
++static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
++{
++ usb_tio_write_u8((u32)(addr + offset), data);
++}
++
++static inline void musb_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
++{
++ return usb_tio_read_int_status(int_usb, int_tx, int_rx);
++}
++#endif /* CONFIG_UBICOM32 */
+
+ #ifdef CONFIG_USB_TUSB6010
+
+@@ -106,7 +137,7 @@ static inline void musb_writeb(void __io
+ __raw_writew(tmp, addr + (offset & ~1));
+ }
+
+-#else
++#elif !defined(CONFIG_UBICOM32)
+
+ static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+ { return __raw_readb(addr + offset); }
+--- a/drivers/usb/musb/musb_regs.h
++++ b/drivers/usb/musb/musb_regs.h
+@@ -167,6 +167,7 @@
+ (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+ | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
++
+ /* RXCSR in Peripheral and Host mode */
+ #define MUSB_RXCSR_AUTOCLEAR 0x8000
+ #define MUSB_RXCSR_DMAENAB 0x2000
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -93,6 +93,63 @@ config LCD_HP700
+ If you have an HP Jornada 700 series handheld (710/720/728)
+ say Y to enable LCD control driver.
+
++config LCD_UBICOM32POWER
++ tristate "Ubicom LCD power Driver"
++ depends on LCD_CLASS_DEVICE && UBICOM32
++ default n
++ help
++ If you have a Ubicom32 based system with an LCD panel that requires
++ power control, say Y to enable the power control driver for it.
++
++config LCD_UBICOM32
++ tristate "Ubicom Backlight Driver"
++ depends on LCD_CLASS_DEVICE && UBICOM32
++ default n
++ help
++ This driver takes care of initialization of LCD panels with
++ built in controllers.
++
++menu "Ubicom32 LCD Panel Support"
++ depends on UBICOM32 && LCD_UBICOM32
++
++config LCD_UBICOM32_TFT2N0369E_P
++ bool "TFT2N0369E (Portrait)"
++ default n
++ help
++ Support for TFT2N0369 in portrait mode
++
++config LCD_UBICOM32_TFT2N0369E_L
++ bool "TFT2N0369E (Landscape)"
++ default n
++ help
++ Support for TFT2N0369 in landscape mode
++
++config LCD_UBICOM32_CFAF240320KTTS
++ bool "CFAF240320KTTS"
++ default n
++ help
++ Support for CFAF240320KTTS
++
++config LCD_UBICOM32_CFAF240320KTTS_180
++ bool "CFAF240320KTTS (180 rotation)"
++ default n
++ help
++ Support for CFAF240320KTTS rotated 180 degrees
++
++config LCD_UBICOM32_CFAF240320D
++ bool "CFAF240320D"
++ default n
++ help
++ Support for CFAF240320D
++
++config LCD_UBICOM32_CFAF320240F
++ bool "CFAF320240F"
++ default n
++ help
++ Support for CFAF320240F
++
++endmenu
++
+ #
+ # Backlight
+ #
+@@ -229,3 +286,11 @@ config BACKLIGHT_SAHARA
+ help
+ If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
+ backlight driver.
++
++config BACKLIGHT_UBICOM32
++ tristate "Ubicom Backlight Driver"
++ depends on BACKLIGHT_CLASS_DEVICE && UBICOM32
++ default n
++ help
++ If you have a Ubicom32 based system with a backlight say Y to enable the
++ backlight driver.
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -9,6 +9,9 @@ obj-$(CONFIG_LCD_PLATFORM) += platfor
+ obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
+ obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
+ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
++obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
++obj-$(CONFIG_LCD_UBICOM32POWER) += ubicom32lcdpower.o
++obj-$(CONFIG_LCD_UBICOM32) += ubicom32lcd.o
+
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
+@@ -24,4 +27,4 @@ obj-$(CONFIG_BACKLIGHT_DA903X) += da903x
+ obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
+ obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
+ obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
+-
++obj-$(CONFIG_BACKLIGHT_UBICOM32) += ubicom32bl.o
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -609,6 +609,50 @@ config FB_BFIN_T350MCQB
+ This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+ It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
++config FB_UBICOM32
++ tristate "Ubicom32 Frame Buffer driver"
++ depends on FB && UBICOM32
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ select FONT_6x11 if FRAMEBUFFER_CONSOLE
++ help
++ This is the framebuffer device driver for the Ubicom32 architecture.
++ You can configure video memory by using kernel command line parameters, for example:
++ video=ubicomfb:vram_size=512,init_value=0xffff
++
++config FB_UBICOM32_PLIO80
++ tristate "Ubicom32 80 Bus PLIO Frame Buffer driver"
++ depends on FB && UBICOM32
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ select FONT_6x11 if FRAMEBUFFER_CONSOLE
++ select UBICOM32_PLIO
++ help
++ This is a framebuffer device driver for the Ubicom32 architecture.
++ You can configure the xres, yres and vram size (in kilobytes) by using
++ kernel command line parameters, for example:
++ video=ubicom32vfb:xres=320,yres=240,vram_size=512
++
++config FB_UBICOM32_VIRTUAL
++ tristate "Ubicom32 Virtual Frame Buffer driver"
++ depends on FB && UBICOM32
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ select FONT_6x11 if FRAMEBUFFER_CONSOLE
++ help
++ This is a virtual framebuffer device driver for the Ubicom32 architecture.
++ You can configure the xres, yres and vram size (in kilobytes) by using
++ kernel command line parameters, for example:
++ video=ubicom32vfb:xres=320,yres=240,vram_size=512
++
++config FB_UBICOM32_VIRTUAL_NOAUTO
++ bool "Do not automatically load"
++ depends on FB_UBICOM32_VIRTUAL
++ help
++ Select this option to prevent the VFB from automatically loading at boot.
+
+ config FB_STI
+ tristate "HP STI frame buffer device support"
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -136,6 +136,10 @@ obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-
+ obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
+ obj-$(CONFIG_FB_MX3) += mx3fb.o
+
++obj-$(CONFIG_FB_UBICOM32) += ubicom32fb.o
++obj-$(CONFIG_FB_UBICOM32_PLIO80) += ubicom32plio80.o
++obj-$(CONFIG_FB_UBICOM32_VIRTUAL) += ubicom32vfb.o
++
+ # the test framebuffer is last
+ obj-$(CONFIG_FB_VIRTUAL) += vfb.o
+
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -887,6 +887,19 @@ config WATCHDOG_RIO
+ machines. The watchdog timeout period is normally one minute but
+ can be changed with a boot-time parameter.
+
++# Ubicom32
++
++config UBI32_WDT
++ tristate "Ubicom32 Hardware Watchdog support"
++ depends on UBICOM32
++ ---help---
++ If you say yes here you will get support for the Ubicom32 On-Chip
++ Watchdog Timer. If you have one of these processors and wish to
++ have watchdog support enabled, say Y, otherwise say N.
++
++ To compile this driver as a module, choose M here: the
++ module will be called ubi32_wdt.
++
+ # XTENSA Architecture
+
+ #
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -131,6 +131,9 @@ obj-$(CONFIG_SH_WDT) += shwdt.o
+ obj-$(CONFIG_WATCHDOG_RIO) += riowd.o
+ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
+
++# Ubicom32 Architecture
++obj-$(CONFIG_UBI32_WDT) += ubi32_wdt.o
++
+ # XTENSA Architecture
+
+ # Architecture Independant
+--- a/fs/binfmt_flat.c
++++ b/fs/binfmt_flat.c
+@@ -67,6 +67,11 @@
+ #define FLAT_DATA_ALIGN (sizeof(void *))
+ #endif
+
++#ifndef ARCH_FLAT_ALIGN
++#undef FLAT_DATA_ALIGN
++#define FLAT_DATA_ALIGN ARCH_FLAT_ALIGN
++#endif
++
+ #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
+ #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
+
+@@ -436,6 +441,7 @@ static int load_flat_file(struct linux_b
+ loff_t fpos;
+ unsigned long start_code, end_code;
+ int ret;
++ int flush_happened = 0;
+
+ hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
+ inode = bprm->file->f_path.dentry->d_inode;
+@@ -521,6 +527,7 @@ static int load_flat_file(struct linux_b
+
+ /* OK, This is the point of no return */
+ set_personality(PER_LINUX_32BIT);
++ flush_happened = 1;
+ }
+
+ /*
+@@ -535,6 +542,12 @@ static int load_flat_file(struct linux_b
+ * it all together.
+ */
+ if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) {
++
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ printk("Unable to mmap rom with ARCH alignment requirements\n");
++ ret = -ENOEXEC;
++ goto err;
++#endif
+ /*
+ * this should give us a ROM ptr, but if it doesn't we don't
+ * really care
+@@ -553,7 +566,7 @@ static int load_flat_file(struct linux_b
+ goto err;
+ }
+
+- len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
++ len = data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
+ len = PAGE_ALIGN(len);
+ down_write(&current->mm->mmap_sem);
+ realdatastart = do_mmap(0, 0, len,
+@@ -572,6 +585,7 @@ static int load_flat_file(struct linux_b
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
++ //datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
+
+ DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
+ (int)(data_len + bss_len + stack_len), (int)datapos);
+@@ -600,7 +614,11 @@ static int load_flat_file(struct linux_b
+ memp_size = len;
+ } else {
+
+- len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
++ len = text_len + data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ /* Reserve space for the text alignment. */
++ len += FLAT_DATA_ALIGN;
++#endif
+ len = PAGE_ALIGN(len);
+ down_write(&current->mm->mmap_sem);
+ textpos = do_mmap(0, 0, len,
+@@ -616,10 +634,17 @@ static int load_flat_file(struct linux_b
+ goto err;
+ }
+
++ memp = textpos;
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ textpos = ALIGN(textpos + sizeof(struct flat_hdr), FLAT_DATA_ALIGN) - sizeof(struct flat_hdr);
++#endif
+ realdatastart = textpos + ntohl(hdr->data_start);
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
++// datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
++// reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
++// ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN));
+
+ reloc = (unsigned long *)
+ (datapos + (ntohl(hdr->reloc_start) - text_len));
+@@ -659,7 +684,7 @@ static int load_flat_file(struct linux_b
+ }
+ if (result >= (unsigned long)-4096) {
+ printk("Unable to read code+data+bss, errno %d\n",(int)-result);
+- do_munmap(current->mm, textpos, text_len + data_len + extra +
++ do_munmap(current->mm, memp, text_len + data_len + extra +
+ MAX_SHARED_LIBS * sizeof(unsigned long));
+ ret = result;
+ goto err;
+@@ -672,6 +697,9 @@ static int load_flat_file(struct linux_b
+
+ /* The main program needs a little extra setup in the task structure */
+ start_code = textpos + sizeof (struct flat_hdr);
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ BUG_ON(ALIGN(start_code, FLAT_DATA_ALIGN) != start_code);
++#endif
+ end_code = textpos + text_len;
+ if (id == 0) {
+ current->mm->start_code = start_code;
+@@ -800,6 +828,13 @@ static int load_flat_file(struct linux_b
+
+ return 0;
+ err:
++ if (flush_happened) {
++ /*
++ * The parent process has already started running. We cannot allow the child to return back to user space
++ * as this child is still uning the parent stack and 2 will clobber each other. We are going to kill this child.
++ */
++ do_exit(SIGTERM);
++ }
+ return ret;
+ }
+
+--- a/fs/Kconfig.binfmt
++++ b/fs/Kconfig.binfmt
+@@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF
+ config BINFMT_ELF_FDPIC
+ bool "Kernel support for FDPIC ELF binaries"
+ default y
+- depends on (FRV || BLACKFIN || (SUPERH32 && !MMU))
++ depends on (FRV || BLACKFIN || (SUPERH32 && !MMU) || UBICOM32)
+ help
+ ELF FDPIC binaries are based on ELF, but allow the individual load
+ segments of a binary to be located in memory independently of each
+--- a/include/asm-generic/resource.h
++++ b/include/asm-generic/resource.h
+@@ -69,13 +69,16 @@
+ /*
+ * boot-time rlimit defaults for the init task:
+ */
++#ifndef CONFIG_ELF_CORE
++#define CONFIG_USER_ELF_CORE_SIZE 0
++#endif
+ #define INIT_RLIMITS \
+ { \
+ [RLIMIT_CPU] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_FSIZE] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_DATA] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_STACK] = { _STK_LIM, _STK_LIM_MAX }, \
+- [RLIMIT_CORE] = { 0, RLIM_INFINITY }, \
++ [RLIMIT_CORE] = { CONFIG_USER_ELF_CORE_SIZE, RLIM_INFINITY }, \
+ [RLIMIT_RSS] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_NPROC] = { 0, 0 }, \
+ [RLIMIT_NOFILE] = { INR_OPEN, INR_OPEN }, \
+--- a/include/linux/elf-em.h
++++ b/include/linux/elf-em.h
+@@ -41,6 +41,7 @@
+ * up with a final number.
+ */
+ #define EM_ALPHA 0x9026
++#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */
+
+ /* Bogus old v850 magic number, used by old tools. */
+ #define EM_CYGNUS_V850 0x9080
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -151,6 +151,10 @@ struct dentry;
+ #define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
+ #define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
+
++#define FB_ACCEL_UBICOM32 0x0100 /* Ubicom32 */
++#define FB_ACCEL_UBICOM32_VFB 0x0101 /* Ubicom32 VFB */
++#define FB_ACCEL_UBICOM32_PLIO80 0x0102 /* Ubicom32 PLIO80 */
++
+ struct fb_fix_screeninfo {
+ char id[16]; /* identification string eg "TT Builtin" */
+ unsigned long smem_start; /* Start of frame buffer mem */
+--- a/include/linux/if_ppp.h
++++ b/include/linux/if_ppp.h
+@@ -114,14 +114,14 @@ struct pppol2tp_ioc_stats {
+ __u16 tunnel_id; /* redundant */
+ __u16 session_id; /* if zero, get tunnel stats */
+ __u32 using_ipsec:1; /* valid only for session_id == 0 */
+- aligned_u64 tx_packets;
+- aligned_u64 tx_bytes;
+- aligned_u64 tx_errors;
+- aligned_u64 rx_packets;
+- aligned_u64 rx_bytes;
+- aligned_u64 rx_seq_discards;
+- aligned_u64 rx_oos_packets;
+- aligned_u64 rx_errors;
++ __u64 tx_packets;
++ __u64 tx_bytes;
++ __u64 tx_errors;
++ __u64 rx_packets;
++ __u64 rx_bytes;
++ __u64 rx_seq_discards;
++ __u64 rx_oos_packets;
++ __u64 rx_errors;
+ };
+
+ #define ifr__name b.ifr_ifrn.ifrn_name
+--- a/include/linux/oprofile.h
++++ b/include/linux/oprofile.h
+@@ -99,6 +99,8 @@ void oprofile_add_sample(struct pt_regs
+ */
+ void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+ unsigned long event, int is_kernel);
++void oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
++ unsigned long event, int is_kernel, int cpu);
+
+ /* Use this instead when the PC value is not from the regs. Doesn't
+ * backtrace. */
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -167,6 +167,9 @@
+ /* MAX3100 */
+ #define PORT_MAX3100 86
+
++/* Ubicom32 */
++#define PORT_UBI32_UARTTIO 87
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -317,4 +317,14 @@ static inline void *kzalloc_node(size_t
+ return kmalloc_node(size, flags | __GFP_ZERO, node);
+ }
+
++struct kmem_cache_size_info {
++ unsigned short page;
++ unsigned short order;
++};
++
++/*
++ * get info on all the memory allocated by slab for this named cache
++ */
++extern int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data);
++
+ #endif /* _LINUX_SLAB_H */
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -865,6 +865,12 @@ config ELF_CORE
+ help
+ Enable support for generating core dumps. Disabling saves about 4k.
+
++config USER_ELF_CORE_SIZE
++ int "user core dump size (10MB to 32MB)"
++ range 10485760 33554432
++ default 16777216
++ depends on ELF_CORE
++
+ config PCSPKR_PLATFORM
+ bool "Enable PC-Speaker support" if EMBEDDED
+ depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -2688,6 +2688,9 @@ static int m_show(struct seq_file *m, vo
+ /* Used by oprofile and other similar tools. */
+ seq_printf(m, " 0x%p", mod->module_core);
+
++#ifdef ARCH_PROC_MODULES_EXTRA
++ ARCH_PROC_MODULES_EXTRA(m, mod);
++#endif
+ /* Taints info */
+ if (mod->taints)
+ seq_printf(m, " %s", module_flags(mod, buf));
+@@ -2840,8 +2843,12 @@ void print_modules(void)
+ printk("Modules linked in:");
+ /* Most callers should already have preempt disabled, but make sure */
+ preempt_disable();
+- list_for_each_entry_rcu(mod, &modules, list)
++ list_for_each_entry_rcu(mod, &modules, list) {
+ printk(" %s%s", mod->name, module_flags(mod, buf));
++#ifdef ARCH_OOPS_MODULE_EXTRA
++ ARCH_OOPS_MODULE_EXTRA(mod);
++#endif
++ }
+ preempt_enable();
+ if (last_unloaded_module[0])
+ printk(" [last unloaded: %s]", last_unloaded_module);
+--- a/kernel/sched_clock.c
++++ b/kernel/sched_clock.c
+@@ -38,8 +38,7 @@
+ */
+ unsigned long long __attribute__((weak)) sched_clock(void)
+ {
+- return (unsigned long long)(jiffies - INITIAL_JIFFIES)
+- * (NSEC_PER_SEC / HZ);
++ return (get_jiffies_64() - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
+ }
+
+ static __read_mostly int sched_clock_running;
+--- a/lib/Kconfig.debug
++++ b/lib/Kconfig.debug
+@@ -621,7 +621,7 @@ config FRAME_POINTER
+ bool "Compile the kernel with frame pointers"
+ depends on DEBUG_KERNEL && \
+ (CRIS || M68K || M68KNOMMU || FRV || UML || \
+- AVR32 || SUPERH || BLACKFIN || MN10300) || \
++ AVR32 || SUPERH || BLACKFIN || MN10300 || UBICOM32) || \
+ ARCH_WANT_FRAME_POINTERS
+ default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
+ help
+--- a/mm/Makefile
++++ b/mm/Makefile
+@@ -38,3 +38,5 @@ obj-$(CONFIG_SMP) += allocpercpu.o
+ endif
+ obj-$(CONFIG_QUICKLIST) += quicklist.o
+ obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o
++
++CFLAGS_slab.o := $(PROFILING) -O2
+--- a/mm/slab.c
++++ b/mm/slab.c
+@@ -4100,6 +4100,68 @@ out:
+
+ #ifdef CONFIG_SLABINFO
+
++
++/*
++ * get info on all the memory allocated by slab for this named cache
++ */
++int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data)
++{
++ int res = 0;
++ int found = 0;
++ int node;
++ struct kmem_cache *cachep;
++ struct kmem_list3 *l3;
++ struct slab *slabp;
++
++ /* Find the cache in the chain of caches. */
++ mutex_lock(&cache_chain_mutex);
++ list_for_each_entry(cachep, &cache_chain, next) {
++ if (strcmp(cachep->name, name) == 0) {
++ found = 1;
++ break;
++ }
++ }
++ mutex_unlock(&cache_chain_mutex);
++ if (!found) {
++ return 0;
++ }
++ for_each_online_node(node) {
++ l3 = cachep->nodelists[node];
++ if (!l3)
++ continue;
++ if (res >= max_data)
++ break;
++ check_irq_on();
++ spin_lock_irq(&l3->list_lock);
++
++ list_for_each_entry(slabp, &l3->slabs_full, list) {
++ if (res >= max_data)
++ break;
++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
++ data[res].order = cachep->gfporder;
++ res++;
++ }
++ list_for_each_entry(slabp, &l3->slabs_partial, list) {
++ if (res >= max_data)
++ break;
++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
++ data[res].order = cachep->gfporder;
++ res++;
++ }
++ list_for_each_entry(slabp, &l3->slabs_free, list) {
++ if (res >= max_data)
++ break;
++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
++ data[res].order = cachep->gfporder;
++ res++;
++ }
++
++ spin_unlock_irq(&l3->list_lock);
++ }
++
++ return res;
++}
++
+ static void print_slabinfo_header(struct seq_file *m)
+ {
+ /*
+--- a/scripts/mod/file2alias.c
++++ b/scripts/mod/file2alias.c
+@@ -774,6 +774,15 @@ void handle_moddevtable(struct module *m
+ + sym->st_value;
+ }
+
++ /*
++ * somehow our gcc is not generating st_size correctly and set 0 for some symbols.
++ * and 0 size will break do_table since it adjust size to (size - id_size)
++ * this is to make sure st_size fall in range.
++ */
++ if (sym->st_size == 0 || sym->st_size > info->sechdrs[sym->st_shndx].sh_size) {
++ sym->st_size = info->sechdrs[sym->st_shndx].sh_size;
++ }
++
+ if (sym_is(symname, "__mod_pci_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct pci_device_id), "pci",
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -82,6 +82,8 @@ source "sound/parisc/Kconfig"
+
+ source "sound/soc/Kconfig"
+
++source "sound/ubicom32/Kconfig"
++
+ endif # SND
+
+ menuconfig SOUND_PRIME
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+- sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/
++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ ubicom32/
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out