branch Attitude Adjustment

git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 898 insertions, 0 deletions

diff --git a/target/linux/ubicom32/files/drivers/net/ubi32-eth.c b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c
new file mode 100644
index 000000000..e9c62f462
--- /dev/null
+++ b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c
@@ -0,0 +1,766 @@
+/*
+ * drivers/net/ubi32-eth.c
+ *   Ubicom32 ethernet TIO interface driver.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port.  If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ *   arch/m68knommu
+ *   arch/blackfin
+ *   arch/parisc
+ */
+/*
+ * ubi32_eth.c
+ * Ethernet driver for Ip5k/Ip7K
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <asm/checksum.h>
+#include <asm/ip5000.h>
+#include <asm/devtree.h>
+#include <asm/system.h>
+
+#define UBICOM32_USE_NAPI	/* define this to use NAPI instead of tasklet */
+//#define UBICOM32_USE_POLLING	/* define this to use polling instead of interrupt */
+#include "ubi32-eth.h"
+
+/*
+ * TODO:
+ * mac address from flash
+ * multicast filter
+ * ethtool support
+ * sysfs support
+ * skb->nrfrag support
+ * ioctl
+ * monitor phy status
+ */
+
+extern int ubi32_ocm_skbuf_max, ubi32_ocm_skbuf, ubi32_ddr_skbuf;
+static const char *eth_if_name[UBI32_ETH_NUM_OF_DEVICES] =
+	{"eth_lan", "eth_wan"};
+static struct net_device *ubi32_eth_devices[UBI32_ETH_NUM_OF_DEVICES] =
+	{NULL, NULL};
+static u8_t mac_addr[UBI32_ETH_NUM_OF_DEVICES][ETH_ALEN] = {
+	{0x00, 0x03, 0x64, 'l', 'a', 'n'},
+	{0x00, 0x03, 0x64, 'w', 'a', 'n'}};
+
+#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
+static inline struct sk_buff *ubi32_alloc_skb_ocm(struct net_device *dev, unsigned int length)
+{
+	return __dev_alloc_skb(length, GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA);
+}
+#endif
+
+static inline struct sk_buff *ubi32_alloc_skb(struct net_device *dev, unsigned int length)
+{
+	return __dev_alloc_skb(length, GFP_ATOMIC | __GFP_NOWARN);
+}
+
+static void ubi32_eth_vp_rxtx_enable(struct net_device *dev)
+{
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+	priv->regs->command = UBI32_ETH_VP_CMD_RX_ENABLE | UBI32_ETH_VP_CMD_TX_ENABLE;
+	priv->regs->int_mask = (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
+	ubicom32_set_interrupt(priv->vp_int_bit);
+}
+
+static void ubi32_eth_vp_rxtx_stop(struct net_device *dev)
+{
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+	priv->regs->command = 0;
+	priv->regs->int_mask = 0;
+	ubicom32_set_interrupt(priv->vp_int_bit);
+
+	/* Wait for graceful shutdown */
+	while (priv->regs->status & (UBI32_ETH_VP_STATUS_RX_STATE | UBI32_ETH_VP_STATUS_TX_STATE));
+}
+
+/*
+ * ubi32_eth_tx_done()
+ */
+static int ubi32_eth_tx_done(struct net_device *dev)
+{
+	struct ubi32_eth_private *priv;
+	struct sk_buff *skb;
+	volatile void *pdata;
+	struct ubi32_eth_dma_desc *desc;
+	u32_t 	count = 0;
+
+	priv = netdev_priv(dev);
+
+	priv->regs->int_status &= ~UBI32_ETH_VP_INT_TX;
+	while (priv->tx_tail != priv->regs->tx_out) {
+		pdata = priv->regs->tx_dma_ring[priv->tx_tail];
+		BUG_ON(pdata == NULL);
+
+		skb = container_of((void *)pdata, struct sk_buff, cb);
+		desc = (struct ubi32_eth_dma_desc *)pdata;
+		if (unlikely(!(desc->status & UBI32_ETH_VP_TX_OK))) {
+			dev->stats.tx_errors++;
+		} else {
+			dev->stats.tx_packets++;
+			dev->stats.tx_bytes += skb->len;
+		}
+		dev_kfree_skb_any(skb);
+		priv->regs->tx_dma_ring[priv->tx_tail] = NULL;
+		priv->tx_tail = (priv->tx_tail + 1) & TX_DMA_RING_MASK;
+		count++;
+	}
+
+	if (unlikely(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) {
+		spin_lock(&priv->lock);
+		if (priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL) {
+			priv->regs->status &= ~UBI32_ETH_VP_STATUS_TX_Q_FULL;
+			netif_wake_queue(dev);
+		}
+		spin_unlock(&priv->lock);
+	}
+	return count;
+}
+
+/*
+ * ubi32_eth_receive()
+ *	To avoid locking overhead, this is called only
+ *	by tasklet when not using NAPI, or
+ *	by NAPI poll when using NAPI.
+ *	return number of frames processed
+ */
+static int ubi32_eth_receive(struct net_device *dev, int quota)
+{
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+	unsigned short rx_in = priv->regs->rx_in;
+	struct sk_buff *skb;
+	struct ubi32_eth_dma_desc *desc = NULL;
+	volatile void *pdata;
+
+	int extra_reserve_adj;
+	int extra_alloc = UBI32_ETH_RESERVE_SPACE + UBI32_ETH_TRASHED_MEMORY;
+	int replenish_cnt, count = 0;
+	int replenish_max = RX_DMA_MAX_QUEUE_SIZE;
+#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
+	if (likely(dev == ubi32_eth_devices[0]))
+		replenish_max = min(ubi32_ocm_skbuf_max, RX_DMA_MAX_QUEUE_SIZE);;
+#endif
+
+	if (unlikely(rx_in == priv->regs->rx_out))
+		priv->vp_stats.rx_q_full_cnt++;
+
+	priv->regs->int_status &= ~UBI32_ETH_VP_INT_RX;
+	while (priv->rx_tail != priv->regs->rx_out) {
+		if (unlikely(count == quota)) {
+			/* There is still frame pending to be processed */
+			priv->vp_stats.rx_throttle++;
+			break;
+		}
+
+		pdata = priv->regs->rx_dma_ring[priv->rx_tail];
+		BUG_ON(pdata == NULL);
+
+		desc = (struct ubi32_eth_dma_desc *)pdata;
+		skb = container_of((void *)pdata, struct sk_buff, cb);
+		count++;
+		priv->regs->rx_dma_ring[priv->rx_tail] = NULL;
+		priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK);
+
+		/*
+		 * Check only RX_OK bit here.
+		 * The rest of status word is used as timestamp
+		 */
+		if (unlikely(!(desc->status & UBI32_ETH_VP_RX_OK))) {
+			dev->stats.rx_errors++;
+			dev_kfree_skb_any(skb);
+			continue;
+		}
+
+		skb_put(skb, desc->data_len);
+		skb->dev = dev;
+		skb->protocol = eth_type_trans(skb, dev);
+		skb->ip_summed = CHECKSUM_NONE;
+		dev->stats.rx_bytes += skb->len;
+		dev->stats.rx_packets++;
+#ifndef UBICOM32_USE_NAPI
+		netif_rx(skb);
+#else
+		netif_receive_skb(skb);
+#endif
+	}
+
+	/* fill in more descripor for VP*/
+	replenish_cnt =  replenish_max -
+		((RX_DMA_RING_SIZE + rx_in - priv->rx_tail) & RX_DMA_RING_MASK);
+	if (replenish_cnt > 0) {
+#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
+		/*
+		 * black magic for perforamnce:
+		 *   Try to allocate skb from OCM only for first Ethernet I/F.
+		 *   Also limit number of RX buffers to 21 due to limited OCM.
+		 */
+		if (likely(dev == ubi32_eth_devices[0])) {
+			do {
+				skb = ubi32_alloc_skb_ocm(dev, RX_BUF_SIZE + extra_alloc);
+				if (!skb) {
+					break;
+				}
+				/* set up dma descriptor */
+				ubi32_ocm_skbuf++;
+				desc = (struct ubi32_eth_dma_desc *)skb->cb;
+				extra_reserve_adj =
+					((u32)skb->data + UBI32_ETH_RESERVE_SPACE + ETH_HLEN) &
+					(CACHE_LINE_SIZE - 1);
+				skb_reserve(skb, UBI32_ETH_RESERVE_SPACE - extra_reserve_adj);
+				desc->data_pointer = skb->data;
+				desc->buffer_len = RX_BUF_SIZE + UBI32_ETH_TRASHED_MEMORY;
+				desc->data_len = 0;
+				desc->status = 0;
+				priv->regs->rx_dma_ring[rx_in] = desc;
+				rx_in = (rx_in + 1) & RX_DMA_RING_MASK;
+			} while (--replenish_cnt > 0);
+		}
+#endif
+
+		while (replenish_cnt-- > 0) {
+			skb = ubi32_alloc_skb(dev, RX_BUF_SIZE + extra_alloc);
+			if (!skb) {
+				priv->vp_stats.rx_alloc_err++;
+				break;
+			}
+			/* set up dma descriptor */
+			ubi32_ddr_skbuf++;
+			desc = (struct ubi32_eth_dma_desc *)skb->cb;
+			extra_reserve_adj =
+				((u32)skb->data + UBI32_ETH_RESERVE_SPACE + ETH_HLEN) &
+				(CACHE_LINE_SIZE - 1);
+			skb_reserve(skb, UBI32_ETH_RESERVE_SPACE - extra_reserve_adj);
+			desc->data_pointer = skb->data;
+			desc->buffer_len = RX_BUF_SIZE + UBI32_ETH_TRASHED_MEMORY;
+			desc->data_len = 0;
+			desc->status = 0;
+			priv->regs->rx_dma_ring[rx_in] = desc;
+			rx_in = (rx_in + 1) & RX_DMA_RING_MASK;
+		}
+
+		wmb();
+		priv->regs->rx_in = rx_in;
+		ubicom32_set_interrupt(priv->vp_int_bit);
+	}
+
+	if (likely(count > 0)) {
+		dev->last_rx = jiffies;
+	}
+	return count;
+}
+
+#ifdef UBICOM32_USE_NAPI
+static int ubi32_eth_napi_poll(struct napi_struct *napi, int budget)
+{
+	struct ubi32_eth_private *priv = container_of(napi, struct ubi32_eth_private, napi);
+	struct net_device *dev = priv->dev;
+	u32_t count;
+
+	if (priv->tx_tail != priv->regs->tx_out) {
+                ubi32_eth_tx_done(dev);
+        }
+
+	count = ubi32_eth_receive(dev, budget);
+
+	if (count < budget) {
+		napi_complete(napi);
+		priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
+		if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) {
+			if (napi_reschedule(napi)) {
+				priv->regs->int_mask = 0;
+			}
+		}
+	}
+	return count;
+}
+
+#else
+static void ubi32_eth_do_tasklet(unsigned long arg)
+{
+	struct net_device *dev = (struct net_device *)arg;
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+
+	if (priv->tx_tail != priv->regs->tx_out) {
+		ubi32_eth_tx_done(dev);
+	}
+
+	/* always call receive to process new RX frame as well as replenish RX buffers */
+	ubi32_eth_receive(dev, UBI32_RX_BOUND);
+
+	priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
+	if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) {
+		priv->regs->int_mask = 0;
+		tasklet_schedule(&priv->tsk);
+	}
+}
+#endif
+
+#if defined(UBICOM32_USE_POLLING)
+static struct timer_list eth_poll_timer;
+
+static void ubi32_eth_poll(unsigned long arg)
+{
+	struct net_device *dev;
+	struct ubi32_eth_private *priv;
+	int i;
+
+	for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
+		dev = ubi32_eth_devices[i];
+		if (dev && (dev->flags & IFF_UP)) {
+			priv = netdev_priv(dev);
+#ifdef UBICOM32_USE_NAPI
+			napi_schedule(&priv->napi);
+#else
+			tasklet_schedule(&priv->tsk);
+#endif
+		}
+	}
+
+	eth_poll_timer.expires = jiffies + 2;
+	add_timer(&eth_poll_timer);
+}
+
+#else
+static irqreturn_t ubi32_eth_interrupt(int irq, void *dev_id)
+{
+	struct ubi32_eth_private *priv;
+
+	struct net_device *dev = (struct net_device *)dev_id;
+	BUG_ON(irq != dev->irq);
+
+	priv = netdev_priv(dev);
+	if (unlikely(!(priv->regs->int_status & priv->regs->int_mask))) {
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Disable port interrupt
+	 */
+#ifdef UBICOM32_USE_NAPI
+	if (napi_schedule_prep(&priv->napi)) {
+		priv->regs->int_mask = 0;
+		__napi_schedule(&priv->napi);
+	}
+#else
+	priv->regs->int_mask = 0;
+	tasklet_schedule(&priv->tsk);
+#endif
+	return IRQ_HANDLED;
+}
+#endif
+
+/*
+ * ubi32_eth_open
+ */
+static int ubi32_eth_open(struct net_device *dev)
+{
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+	int err;
+
+	printk(KERN_INFO "eth open %s\n",dev->name);
+#ifndef UBICOM32_USE_POLLING
+	/* request_region() */
+	err = request_irq(dev->irq, ubi32_eth_interrupt, IRQF_DISABLED, dev->name, dev);
+	if (err) {
+		printk(KERN_WARNING "fail to request_irq %d\n",err);
+		 return -ENODEV;
+	}
+#endif
+#ifdef  UBICOM32_USE_NAPI
+	napi_enable(&priv->napi);
+#else
+	tasklet_init(&priv->tsk, ubi32_eth_do_tasklet, (unsigned long)dev);
+#endif
+
+	/* call receive to supply RX buffers */
+	ubi32_eth_receive(dev, RX_DMA_MAX_QUEUE_SIZE);
+
+	/* check phy status and call netif_carrier_on */
+	ubi32_eth_vp_rxtx_enable(dev);
+	netif_start_queue(dev);
+	return 0;
+}
+
+static int ubi32_eth_close(struct net_device *dev)
+{
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+	volatile void *pdata;
+	struct sk_buff *skb;
+
+#ifndef UBICOM32_USE_POLLING
+	free_irq(dev->irq, dev);
+#endif
+	netif_stop_queue(dev); /* can't transmit any more */
+#ifdef UBICOM32_USE_NAPI
+	napi_disable(&priv->napi);
+#else
+	tasklet_kill(&priv->tsk);
+#endif
+	ubi32_eth_vp_rxtx_stop(dev);
+
+	/*
+	 * RX clean up
+	 */
+	while (priv->rx_tail != priv->regs->rx_in) {
+		pdata = priv->regs->rx_dma_ring[priv->rx_tail];
+		skb = container_of((void *)pdata, struct sk_buff, cb);
+		priv->regs->rx_dma_ring[priv->rx_tail] = NULL;
+		dev_kfree_skb_any(skb);
+		priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK);
+	}
+	priv->regs->rx_in = 0;
+	priv->regs->rx_out = priv->regs->rx_in;
+	priv->rx_tail = priv->regs->rx_in;
+
+	/*
+	 * TX clean up
+	 */
+	BUG_ON(priv->regs->tx_out != priv->regs->tx_in);
+	ubi32_eth_tx_done(dev);
+	BUG_ON(priv->tx_tail != priv->regs->tx_in);
+	priv->regs->tx_in = 0;
+	priv->regs->tx_out = priv->regs->tx_in;
+	priv->tx_tail = priv->regs->tx_in;
+
+	return 0;
+}
+
+/*
+ * ubi32_eth_set_config
+ */
+static int ubi32_eth_set_config(struct net_device *dev, struct ifmap *map)
+{
+	/* if must to down to config it */
+	printk(KERN_INFO "set_config %x\n", dev->flags);
+	if (dev->flags & IFF_UP)
+		return -EBUSY;
+
+	/* I/O and IRQ can not be changed */
+	if (map->base_addr != dev->base_addr) {
+		printk(KERN_WARNING "%s: Can't change I/O address\n", dev->name);
+		return -EOPNOTSUPP;
+	}
+
+#ifndef UBICOM32_USE_POLLING
+	if (map->irq != dev->irq) {
+		printk(KERN_WARNING "%s: Can't change IRQ\n", dev->name);
+		return -EOPNOTSUPP;
+	}
+#endif
+
+	/* ignore other fields */
+	return 0;
+}
+
+static int ubi32_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+	struct ubi32_eth_dma_desc *desc = NULL;
+	unsigned short space, tx_in;
+
+	tx_in = priv->regs->tx_in;
+
+	dev->trans_start = jiffies; /* save the timestamp */
+	space = TX_DMA_RING_MASK - ((TX_DMA_RING_SIZE + tx_in - priv->tx_tail) & TX_DMA_RING_MASK);
+
+	if (unlikely(space == 0)) {
+		if (!(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) {
+			spin_lock(&priv->lock);
+			if (!(priv->regs->status & UBI32_ETH_VP_STATUS_TX_Q_FULL)) {
+				priv->regs->status |= UBI32_ETH_VP_STATUS_TX_Q_FULL;
+				priv->vp_stats.tx_q_full_cnt++;
+				netif_stop_queue(dev);
+			}
+			spin_unlock(&priv->lock);
+		}
+
+		/* give both HW and this driver an extra trigger */
+		priv->regs->int_mask |= UBI32_ETH_VP_INT_TX;
+#ifndef UBICOM32_USE_POLLING
+		ubicom32_set_interrupt(dev->irq);
+#endif
+		ubicom32_set_interrupt(priv->vp_int_bit);
+
+		return NETDEV_TX_BUSY;
+	}
+
+	/*still have room */
+	desc = (struct ubi32_eth_dma_desc *)skb->cb;
+	desc->data_pointer = skb->data;
+	desc->data_len = skb->len;
+	priv->regs->tx_dma_ring[tx_in] = desc;
+	tx_in = ((tx_in + 1) & TX_DMA_RING_MASK);
+	wmb();
+	priv->regs->tx_in = tx_in;
+	/* kick the HRT */
+	ubicom32_set_interrupt(priv->vp_int_bit);
+
+	return NETDEV_TX_OK;
+}
+
+/*
+ * Deal with a transmit timeout.
+ */
+static void ubi32_eth_tx_timeout (struct net_device *dev)
+{
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+	dev->stats.tx_errors++;
+	priv->regs->int_mask |= UBI32_ETH_VP_INT_TX;
+#ifndef UBICOM32_USE_POLLING
+	ubicom32_set_interrupt(dev->irq);
+#endif
+	ubicom32_set_interrupt(priv->vp_int_bit);
+}
+
+static int ubi32_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+	struct mii_ioctl_data *data = if_mii(rq);
+
+	printk(KERN_INFO "ioctl %s, %d\n", dev->name, cmd);
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = 0;
+		break;
+
+	case SIOCGMIIREG:
+		if ((data->reg_num & 0x1F) == MII_BMCR) {
+			/* Make up MII control register value from what we know */
+			data->val_out = 0x0000
+			| ((priv->regs->status & UBI32_ETH_VP_STATUS_DUPLEX)
+					? BMCR_FULLDPLX : 0)
+			| ((priv->regs->status & UBI32_ETH_VP_STATUS_SPEED100)
+					? BMCR_SPEED100 : 0)
+			| ((priv->regs->status & UBI32_ETH_VP_STATUS_SPEED1000)
+					? BMCR_SPEED1000 : 0);
+		} else if ((data->reg_num & 0x1F) == MII_BMSR) {
+			/* Make up MII status register value from what we know */
+			data->val_out =
+			(BMSR_100FULL|BMSR_100HALF|BMSR_10FULL|BMSR_10HALF)
+			| ((priv->regs->status & UBI32_ETH_VP_STATUS_LINK)
+					? BMSR_LSTATUS : 0);
+		} else {
+			return -EIO;
+		}
+		break;
+
+	case SIOCSMIIREG:
+		return -EOPNOTSUPP;
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+/*
+ * Return statistics to the caller
+ */
+static struct net_device_stats *ubi32_eth_get_stats(struct net_device *dev)
+{
+	return &dev->stats;
+}
+
+
+static int ubi32_eth_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct ubi32_eth_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	if ((new_mtu < 68) || (new_mtu > 1500))
+		return -EINVAL;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	dev->mtu = new_mtu;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	printk(KERN_INFO "set mtu to %d", new_mtu);
+	return 0;
+}
+
+/*
+ * ubi32_eth_cleanup: unload the module
+ */
+void ubi32_eth_cleanup(void)
+{
+	struct ubi32_eth_private *priv;
+	struct net_device *dev;
+	int i;
+
+	for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
+		dev = ubi32_eth_devices[i];
+		if (dev) {
+			priv = netdev_priv(dev);
+			kfree(priv->regs->tx_dma_ring);
+			unregister_netdev(dev);
+			free_netdev(dev);
+			ubi32_eth_devices[i] = NULL;
+		}
+	}
+}
+
+	static const struct net_device_ops ubi32_netdev_ops = {
+		.ndo_open		= ubi32_eth_open,
+		.ndo_stop		= ubi32_eth_close,
+		.ndo_start_xmit		= ubi32_eth_start_xmit,
+		.ndo_tx_timeout		= ubi32_eth_tx_timeout,
+		.ndo_do_ioctl		= ubi32_eth_ioctl,
+		.ndo_change_mtu		= ubi32_eth_change_mtu,
+		.ndo_set_config		= ubi32_eth_set_config,
+		.ndo_get_stats		= ubi32_eth_get_stats,
+		.ndo_validate_addr	= eth_validate_addr,
+		.ndo_set_mac_address	= eth_mac_addr,
+	};
+
+int ubi32_eth_init_module(void)
+{
+	struct ethtionode *eth_node;
+	struct net_device *dev;
+	struct ubi32_eth_private *priv;
+	int i, err;
+
+	/*
+	 * Device allocation.
+	 */
+	err = 0;
+	for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
+		/*
+		 * See if the eth_vp is in the device tree.
+		 */
+		eth_node = (struct ethtionode *)devtree_find_node(eth_if_name[i]);
+		if (!eth_node) {
+			printk(KERN_INFO "%s does not exist\n", eth_if_name[i]);
+			continue;
+		}
+
+		eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc(
+				sizeof(struct ubi32_eth_dma_desc *) *
+				(TX_DMA_RING_SIZE + RX_DMA_RING_SIZE),
+				GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA);
+
+		if (eth_node->tx_dma_ring == NULL) {
+			eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc(
+				sizeof(struct ubi32_eth_dma_desc *) *
+				(TX_DMA_RING_SIZE + RX_DMA_RING_SIZE), GFP_KERNEL);
+			printk(KERN_INFO "fail to allocate from OCM\n");
+		}
+
+		if (!eth_node->tx_dma_ring) {
+			err = -ENOMEM;
+			break;
+		}
+		eth_node->rx_dma_ring = eth_node->tx_dma_ring + TX_DMA_RING_SIZE;
+		eth_node->tx_sz = TX_DMA_RING_SIZE - 1;
+		eth_node->rx_sz = RX_DMA_RING_SIZE - 1;
+
+		dev = alloc_etherdev(sizeof(struct ubi32_eth_private));
+		if (!dev) {
+			kfree(eth_node->tx_dma_ring);
+			err = -ENOMEM;
+			break;
+		}
+		priv = netdev_priv(dev);
+		priv->dev = dev;
+
+		/*
+		 * This just fill in some default Ubicom MAC address
+		 */
+		memcpy(dev->dev_addr, mac_addr[i], ETH_ALEN);
+		memset(dev->broadcast, 0xff, ETH_ALEN);
+
+		priv->regs = eth_node;
+		priv->regs->command = 0;
+		priv->regs->int_mask = 0;
+		priv->regs->int_status = 0;
+		priv->regs->tx_out = 0;
+		priv->regs->rx_out = 0;
+		priv->regs->tx_in = 0;
+		priv->regs->rx_in = 0;
+		priv->rx_tail = 0;
+		priv->tx_tail = 0;
+
+		priv->vp_int_bit = eth_node->dn.sendirq;
+		dev->irq = eth_node->dn.recvirq;
+
+		spin_lock_init(&priv->lock);
+
+		dev->netdev_ops = &ubi32_netdev_ops;
+
+		dev->watchdog_timeo	= UBI32_ETH_VP_TX_TIMEOUT;
+#ifdef UBICOM32_USE_NAPI
+		netif_napi_add(dev, &priv->napi, ubi32_eth_napi_poll, UBI32_ETH_NAPI_WEIGHT);
+#endif
+		err = register_netdev(dev);
+		if (err) {
+			printk(KERN_WARNING "Failed to register netdev %s\n", eth_if_name[i]);
+			//release_region();
+			free_netdev(dev);
+			kfree(eth_node->tx_dma_ring);
+			break;
+		}
+
+		ubi32_eth_devices[i] = dev;
+		printk(KERN_INFO "%s vp_base:0x%p, tio_int:%d irq:%d feature:0x%lx\n",
+			dev->name, priv->regs, eth_node->dn.sendirq, dev->irq, dev->features);
+	}
+
+	if (err) {
+		ubi32_eth_cleanup();
+		return err;
+	}
+
+	if (!ubi32_eth_devices[0] && !ubi32_eth_devices[1]) {
+		return -ENODEV;
+	}
+
+#if defined(UBICOM32_USE_POLLING)
+	init_timer(&eth_poll_timer);
+	eth_poll_timer.function = ubi32_eth_poll;
+	eth_poll_timer.data = (unsigned long)0;
+	eth_poll_timer.expires = jiffies + 2;
+	add_timer(&eth_poll_timer);
+#endif
+
+	return 0;
+}
+
+module_init(ubi32_eth_init_module);
+module_exit(ubi32_eth_cleanup);
+
+MODULE_AUTHOR("Kan Yan, Greg Ren");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/ubicom32/files/drivers/net/ubi32-eth.h b/target/linux/ubicom32/files/drivers/net/ubi32-eth.h
new file mode 100644
index 000000000..c25500143
--- /dev/null
+++ b/target/linux/ubicom32/files/drivers/net/ubi32-eth.h
@@ -0,0 +1,132 @@
+/*
+ * drivers/net/ubi32-eth.h
+ *   Ubicom32 ethernet TIO interface driver definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port.  If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ *   arch/m68knommu
+ *   arch/blackfin
+ *   arch/parisc
+ */
+#ifndef _UBI32_ETH_H
+#define _UBI32_ETH_H
+
+#include <asm/devtree.h>
+
+#define UBI32_ETH_NUM_OF_DEVICES 2
+
+/*
+ * Number of bytes trashed beyond the packet data.
+ */
+#define UBI32_ETH_TRASHED_MEMORY	(CACHE_LINE_SIZE + ETH_HLEN - 1)
+
+/*
+ * Linux already reserves NET_SKB_PAD bytes of headroom in each sk_buff.
+ * We want to be able to reserve at least one cache line to align Ethernet
+ * and IP header to cache line.
+ * Note that the TIO expects a CACHE_LINE_SIZE - ETH_HLEN aligned Ethernet
+ * header, while satisfies NET_IP_ALIGN (= 2) automatically.
+ * (NET_SKB_PAD is 16, NET_IP_ALIGN is 2, CACHE_LINE_SIZE is 32).
+ * You can add more space by making UBI32_ETH_RESERVE_EXTRA != 0.
+ */
+#define UBI32_ETH_RESERVE_EXTRA (1 * CACHE_LINE_SIZE)
+#define UBI32_ETH_RESERVE_SPACE	(UBI32_ETH_RESERVE_EXTRA + CACHE_LINE_SIZE)
+
+struct ubi32_eth_dma_desc {
+	volatile void 	*data_pointer;	/* pointer to the buffer */
+	volatile u16 	buffer_len;	/* the buffer size */
+	volatile u16	data_len;	/* actual frame length */
+	volatile u32	status;		/* bit0: status to be update by VP; bit[31:1] time stamp */
+};
+
+#define TX_DMA_RING_SIZE (1<<8)
+#define TX_DMA_RING_MASK (TX_DMA_RING_SIZE - 1)
+#define RX_DMA_RING_SIZE (1<<8)
+#define RX_DMA_RING_MASK (RX_DMA_RING_SIZE - 1)
+
+#define RX_DMA_MAX_QUEUE_SIZE (RX_DMA_RING_SIZE - 1)	/* no more than (RX_DMA_RING_SIZE - 1) */
+#define RX_MAX_PKT_SIZE (ETH_DATA_LEN + ETH_HLEN + VLAN_HLEN)
+#define RX_MIN_PKT_SIZE	ETH_ZLEN
+#define RX_BUF_SIZE (RX_MAX_PKT_SIZE + VLAN_HLEN)	/* allow double VLAN tag */
+
+#define UBI32_ETH_VP_TX_TIMEOUT (10*HZ)
+
+struct ubi32_eth_vp_stats {
+	u32	rx_alloc_err;
+	u32	tx_q_full_cnt;
+	u32	rx_q_full_cnt;
+	u32	rx_throttle;
+};
+
+struct ubi32_eth_private {
+	struct net_device *dev;
+	struct ubi32_eth_vp_stats vp_stats;
+	spinlock_t lock;
+#ifdef UBICOM32_USE_NAPI
+	struct napi_struct napi;
+#else
+	struct tasklet_struct tsk;
+#endif
+	struct ethtionode *regs;
+	u16	rx_tail;
+	u16	tx_tail;
+	u32	vp_int_bit;
+};
+
+struct ethtionode {
+	struct devtree_node dn;
+	volatile u16	command;
+	volatile u16	status;
+	volatile u16	int_mask;	/* interrupt mask */
+	volatile u16	int_status;	/* interrupt mask */
+	volatile u16	tx_in;		/* owned by driver */
+	volatile u16	tx_out;		/* owned by vp */
+	volatile u16	rx_in;		/* owned by driver */
+	volatile u16	rx_out;		/* owned by vp */
+	u16		tx_sz;		/* owned by driver */
+	u16		rx_sz;		/* owned by driver */
+	struct ubi32_eth_dma_desc **tx_dma_ring;
+	struct ubi32_eth_dma_desc **rx_dma_ring;
+};
+
+#define UBI32_ETH_VP_STATUS_LINK	(1<<0)
+#define UBI32_ETH_VP_STATUS_SPEED100	(0x1<<1)
+#define UBI32_ETH_VP_STATUS_SPEED1000	(0x1<<2)
+#define UBI32_ETH_VP_STATUS_DUPLEX	(0x1<<3)
+#define UBI32_ETH_VP_STATUS_FLOW_CTRL	(0x1<<4)
+
+#define UBI32_ETH_VP_STATUS_RX_STATE	(0x1<<5)
+#define UBI32_ETH_VP_STATUS_TX_STATE	(0x1<<6)
+
+#define UBI32_ETH_VP_STATUS_TX_Q_FULL	(1<<8)
+
+#define UBI32_ETH_VP_INT_RX	(1<<0)
+#define UBI32_ETH_VP_INT_TX	(1<<1)
+
+#define UBI32_ETH_VP_CMD_RX_ENABLE	(1<<0)
+#define UBI32_ETH_VP_CMD_TX_ENABLE	(1<<1)
+
+#define UBI32_ETH_VP_RX_OK		(1<<0)
+#define UBI32_ETH_VP_TX_OK		(1<<1)
+
+#define UBI32_TX_BOUND		TX_DMA_RING_SIZE
+#define UBI32_RX_BOUND		64
+#define UBI32_ETH_NAPI_WEIGHT	64		/* for GigE */
+#endif