branch Attitude Adjustment

git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 212 insertions, 0 deletions

diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh b/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh
new file mode 100644
index 000000000..b2fdda23f
--- /dev/null
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+[ "${ACTION}" = "released" ] || exit 0
+
+. /lib/functions.sh
+
+case "${BUTTON}" in
+	BTN_0)
+		logger "reset pressed"
+		sync
+		reboot
+		;;
+	BTN_1)
+		logger "factory pressed"
+		jffs2_mark_erase "rootfs_data"
+		sync
+		reboot
+		;;
+	*)
+		logger "unknown button ${BUTTON}"
+		;;
+esac
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
new file mode 100644
index 000000000..1eee55e22
--- /dev/null
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -0,0 +1,41 @@
+#!/bin/sh
+# based on gabors ralink wisoc implementation
+
+rt2x00_eeprom_die() {
+	echo "rt2x00 eeprom: " "$*"
+	exit 1
+}
+
+rt2x00_eeprom_extract() {
+	local part=$1
+	local offset=$2
+	local count=$3
+	local mtd
+
+	. /etc/functions.sh
+
+	mtd=$(find_mtd_part $part)
+	[ -n "$mtd" ] || \
+		rt2x00_eeprom_die "no mtd device found for partition $part"
+
+	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
+		rt2x00_eeprom_die "failed to extract from $mtd"
+}
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/lantiq.sh
+
+case "$FIRMWARE" in
+"RT2860.eeprom" )
+	local board=$(lantiq_board_name)
+	case $board in
+	ARV7525PW|ARV752DPW)
+		rt2x00_eeprom_extract "board_config" 1040 272
+		;;
+	*)
+		rt2x00_eeprom_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+esac
diff --git a/target/linux/lantiq/base-files/etc/inittab b/target/linux/lantiq/base-files/etc/inittab
new file mode 100644
index 000000000..96afec9e7
--- /dev/null
+++ b/target/linux/lantiq/base-files/etc/inittab
@@ -0,0 +1,4 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K stop
+ttyLTQ0::askfirst:/bin/ash --login
+ttyLTQ1::askfirst:/bin/ash --login
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/leds b/target/linux/lantiq/base-files/etc/uci-defaults/leds
new file mode 100755
index 000000000..64b080f33
--- /dev/null
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/leds
@@ -0,0 +1,58 @@
+#!/bin/sh
+#
+# Copyright (C) 2011 OpenWrt.org
+# based on ar71xx
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/lantiq.sh
+
+board=$(lantiq_board_name)
+
+case "$board" in
+ARV4520PW|ARV452CPW)
+	ucidef_set_led_netdev "wifi" "wifi" "soc:blue:wifi" "wlan0"
+	ucidef_set_led_usbdev "usb" "USB" "soc:blue:usb" "1-1"
+	ucidef_set_led_default "fxs1" "fxs1" "soc:blue:fxs1" "1"
+	ucidef_set_led_default "fxs2" "fxs2" "soc:blue:fxs2" "1"
+	ucidef_set_led_default "online" "online" "soc:blue:internet" "1"
+	;;
+
+ARV7525PW)
+	ucidef_set_led_netdev "wifi" "wifi" "soc:green:wifi" "wlan0"
+	ucidef_set_led_default "fxs1" "fxs1" "soc:green:fxs1" "1"
+	ucidef_set_led_default "fxs2" "fxs2" "soc:green:fxs2" "1"
+	ucidef_set_led_default "dsl" "dsl" "soc:red:dsl" "1"
+	ucidef_set_led_default "online" "online" "soc:green:online" "1"
+	;;
+
+ARV4525PW)
+	ucidef_set_led_netdev "wifi" "wifi" "soc:green:wifi" "wlan0"
+	ucidef_set_led_default "fxs1" "fxs1" "soc:green:fxs1" "1"
+	ucidef_set_led_default "fxs2" "fxs2" "soc:green:fxs2" "1"
+	ucidef_set_led_default "dsl" "dsl" "soc:green:dsl" "1"
+	ucidef_set_led_default "online" "online" "soc:green:online" "1"
+	;;
+
+GIGASX76X)
+	ucidef_set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
+	ucidef_set_led_netdev "online" "online" "soc:green:online" "pppoe-wan"
+	ucidef_set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
+	;;
+
+ARV4519PW)
+	ucidef_set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
+	ucidef_set_led_netdev "internet" "internet" "soc:green:internet" "pppoe-wan"
+	ucidef_set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
+	;;
+
+ARV7518PW)
+	ucidef_set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
+	ucidef_set_led_netdev "internet" "internet" "soc:green:internet" "pppoe-wan"
+	ucidef_set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
+	;;
+esac
+
+ucidef_commit_leds
+
+exit 0
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/network b/target/linux/lantiq/base-files/etc/uci-defaults/network
new file mode 100755
index 000000000..b40134d93
--- /dev/null
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/network
@@ -0,0 +1,87 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2012 OpenWrt.org
+#
+
+[ -e /etc/config/network ] && exit 0
+
+set_atm_wan() {
+	local vpi=$1
+	local vci=$2
+	local encaps=$3
+	local payload=$4
+	uci batch <<EOF
+set network.atm='atm-bridge'
+set network.atm.unit='0'
+set network.atm.vpi='$vpi'
+set network.atm.vci='$vci'
+set network.atm.encaps='$encaps'
+set network.atm.payload='$payload'
+set network.wan='interface'
+set network.wan.ifname='nas0'
+set network.wan.proto='pppoe'
+set network.wan.username='foo'
+set network.wan.password='bar'
+EOF
+}
+
+set_adsl() {
+	local fwannex=$1
+	local annex=$2
+	uci batch <<EOF
+set network.adsl='adsl-device'
+set network.adsl.fwannex='$fwannex'
+set network.adsl.annex='$annex'
+EOF
+}
+
+. /lib/functions/uci-defaults.sh
+. /lib/lantiq.sh
+
+touch /etc/config/network
+
+ucidef_set_interface_loopback
+ucidef_set_interface_lan 'eth0'
+
+vpi=1
+vci=32
+encaps="llc"
+payload="bridged"
+fwannex=$(lantiq_dsl_fwannex)
+board=$(lantiq_board_name)
+dsl=$(lantiq_soc_has_adsl)
+
+case "$board" in
+# annex B with adm6996
+ARV4520PW)
+	ucidef_set_interface_lan "eth0.1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "3 2 1 0 5t"
+	set_adsl "b" "b2p"
+	;;
+
+GIGASX76X)
+	ucidef_set_interface_lan "eth0.1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "4 3 2 1 5t"
+	set_adsl "b" "b2p"
+	;;
+
+# annex A with ar8316
+ARV4519PW|ARV7518PW)
+	ucidef_set_interface_lan "eth0.1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
+	set_adsl "a" "a2p"
+	;;
+
+ARV7525PW|ARV4525PW|*)
+	set_adsl "$fwannex" "${fwannex}2p"
+	;;
+esac
+
+[ -z "$dsl" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
+
+uci commit network
+
+exit 0