branch Attitude Adjustment

git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 952 insertions, 0 deletions

diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexhome-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexhome-setup.c
new file mode 100644
index 000000000..84daeefe6
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexhome-setup.c
@@ -0,0 +1,123 @@
+/*
+ * arch/arm/mach-kirkwood/goflexhome-setup.c
+ *
+ * Seagate GoFlex Home Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition goflexhome_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_2M + SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data goflexhome_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data goflexhome_sata_data = {
+	.n_ports	= 1,
+};
+
+static struct gpio_led goflexhome_led_pins[] = {
+	{
+		.name			= "status:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:orange:fault",
+		.default_trigger	= "none",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:white:misc",
+		.default_trigger	= "none",
+		.gpio			= 40,
+		.active_low		= 0,
+	}
+};
+
+static struct gpio_led_platform_data goflexhome_led_data = {
+	.leds		= goflexhome_led_pins,
+	.num_leds	= ARRAY_SIZE(goflexhome_led_pins),
+};
+
+static struct platform_device goflexhome_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &goflexhome_led_data,
+	}
+};
+
+static unsigned int goflexhome_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP47_GPIO,	/* LED Orange */
+	MPP46_GPIO,	/* LED Green */
+	MPP40_GPIO,	/* LED White */
+	0
+};
+
+static void __init goflexhome_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(goflexhome_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 40);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&goflexhome_ge00_data);
+	kirkwood_sata_init(&goflexhome_sata_data);
+
+	platform_device_register(&goflexhome_leds);
+}
+
+MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home")
+	/* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= goflexhome_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexnet-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexnet-setup.c
new file mode 100644
index 000000000..cd9dc9ef1
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/goflexnet-setup.c
@@ -0,0 +1,176 @@
+/*
+ * arch/arm/mach-kirkwood/goflexnet-setup.c
+ *
+ * Seagate GoFlex Net Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition goflexnet_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_32M
+	}, {
+		.name = "data",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data goflexnet_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_led goflexnet_led_pins[] = {
+	{
+		.name			= "status:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 46, // 0x4000
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:orange:fault",
+		.default_trigger	= "none",
+		.gpio			= 47, // 0x8000
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:white:left0",
+		.default_trigger	= "none",
+		.gpio			= 42, // 0x0400
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:left1",
+		.default_trigger	= "none",
+		.gpio			= 43, // 0x0800
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:left2",
+		.default_trigger	= "none",
+		.gpio			= 44, // 0x1000
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:left3",
+		.default_trigger	= "none",
+		.gpio			= 45, // 0x2000
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:right0",
+		.default_trigger	= "none",
+		.gpio			= 38, // 0x0040
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:right1",
+		.default_trigger	= "none",
+		.gpio			= 39, // 0x0080
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:right2",
+		.default_trigger	= "none",
+		.gpio			= 40, // 0x0100
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:right3",
+		.default_trigger	= "none",
+		.gpio			= 41, // 0x0200
+		.active_low		= 0,
+	}
+};
+
+static struct gpio_led_platform_data goflexnet_led_data = {
+	.leds		= goflexnet_led_pins,
+	.num_leds	= ARRAY_SIZE(goflexnet_led_pins),
+};
+
+static struct platform_device goflexnet_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &goflexnet_led_data,
+	}
+};
+
+static unsigned int goflexnet_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP47_GPIO,	/* LED Orange */
+	MPP46_GPIO,	/* LED Green */
+	MPP45_GPIO,	/* LED Left Capacity 3 */
+	MPP44_GPIO,	/* LED Left Capacity 2 */
+	MPP43_GPIO,	/* LED Left Capacity 1 */
+	MPP42_GPIO,	/* LED Left Capacity 0 */
+	MPP41_GPIO,	/* LED Right Capacity 3 */
+	MPP40_GPIO,	/* LED Right Capacity 2 */
+	MPP39_GPIO,	/* LED Right Capacity 1 */
+	MPP38_GPIO,	/* LED Right Capacity 0 */
+	0
+};
+
+static void __init goflexnet_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(goflexnet_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 40);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&goflexnet_ge00_data);
+	kirkwood_sata_init(&goflexnet_sata_data);
+
+	platform_device_register(&goflexnet_leds);
+}
+
+MACHINE_START(GOFLEXNET, "Seagate GoFlex Net")
+	/* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= goflexnet_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c
new file mode 100644
index 000000000..4e8d192bb
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c
@@ -0,0 +1,190 @@
+/*
+ * arch/arm/mach-kirkwood/iconnect-setup.c
+ *
+ * Iomega iConnect Wireless
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition iconnect_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_1M + SZ_2M
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_32M,
+	}, {
+		.name = "data",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct gpio_led iconnect_led_pins[] = {
+	{
+		.name			= "iconnect:blue:power",
+		.default_trigger	= "default-on",
+		.gpio			= 42,
+	},
+	{
+		.name			= "iconnect:red:power",
+		.gpio			= 43,
+	},
+	{
+		.name			= "iconnect:blue:usb1",
+		.gpio			= 44,
+	},
+	{
+		.name			= "iconnect:blue:usb2",
+		.gpio			= 45,
+	},
+	{
+		.name			= "iconnect:blue:usb3",
+		.gpio			= 46,
+	},
+	{
+		.name			= "iconnect:blue:usb4",
+		.gpio			= 47,
+	},
+	{
+		.name			= "iconnect:blue:otb",
+		.gpio			= 48,
+	},
+};
+
+static struct gpio_led_platform_data iconnect_led_data = {
+	.leds		= iconnect_led_pins,
+	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
+};
+
+static struct platform_device iconnect_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &iconnect_led_data,
+	}
+};
+
+#define ICONNECT_GPIO_KEY_RESET		12
+#define ICONNECT_GPIO_KEY_OTB		35
+
+#define ICONNECT_SW_RESET		0x00
+#define ICONNECT_SW_OTB			0x01
+
+static struct gpio_keys_button iconnect_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= ICONNECT_SW_RESET,
+		.gpio		= ICONNECT_GPIO_KEY_RESET,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	},
+	{
+		.type		= EV_SW,
+		.code		= ICONNECT_SW_OTB,
+		.gpio		= ICONNECT_GPIO_KEY_OTB,
+		.desc		= "OTB Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	},
+};
+
+static struct gpio_keys_platform_data iconnect_button_data = {
+	.buttons	= iconnect_buttons,
+	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
+};
+
+static struct platform_device iconnect_button_device = {
+	.name	   	= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev = {
+		.platform_data = &iconnect_button_data,
+	},
+};
+
+static unsigned int iconnect_mpp_config[] __initdata = {
+	MPP12_GPIO, /*Input for reset button*/
+	MPP35_GPIO, /*Input for OTB button*/
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	0
+};
+
+static void __init iconnect_init(void)
+{
+	u32 dev, rev;
+
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(iconnect_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&iconnect_ge00_data);
+	kirkwood_pcie_id(&dev, &rev);
+
+	kirkwood_uart0_init();
+	kirkwood_i2c_init();
+
+	platform_device_register(&iconnect_leds);
+	platform_device_register(&iconnect_button_device);
+}
+
+static int __init iconnect_pci_init(void)
+{
+	if (machine_is_iconnect())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(iconnect_pci_init);
+
+
+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
+	.atag_offset	= 0x100,
+	.init_machine	= iconnect_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c
new file mode 100644
index 000000000..00c8531bc
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c
@@ -0,0 +1,190 @@
+/*
+ * arch/arm/mach-kirkwood/nas6210-setup.c
+ *
+ * Raidsonic ICYBOX NAS6210 Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NAS6210_GPIO_POWER_OFF	24
+
+static struct mtd_partition nas6210_nand_parts[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = SZ_512K
+	}, {
+		.name = "uboot_env",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_128K
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 3 * SZ_1M
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data nas6210_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data nas6210_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_led nas6210_led_pins[] = {
+	{
+		.name			= "status:green:power",
+		.default_trigger	= "default-on",
+		.gpio			= 25,
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:red:power",
+		.default_trigger	= "none",
+		.gpio			= 22,
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:red:usb_copy",
+		.default_trigger	= "none",
+		.gpio			= 27,
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data nas6210_led_data = {
+	.leds		= nas6210_led_pins,
+	.num_leds	= ARRAY_SIZE(nas6210_led_pins),
+};
+
+static struct platform_device nas6210_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &nas6210_led_data,
+	}
+};
+
+static struct gpio_keys_button nas6210_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 29,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 28,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data nas6210_button_data = {
+	.buttons	= nas6210_buttons,
+	.nbuttons	= ARRAY_SIZE(nas6210_buttons),
+};
+
+static struct platform_device nas6210_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &nas6210_button_data,
+	}
+};
+
+static unsigned int nas6210_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+ 	MPP22_GPIO,	/* Power LED red */
+	MPP24_GPIO,	/* Power off device */
+	MPP25_GPIO,	/* Power LED green */
+	MPP27_GPIO,	/* USB transfer LED */
+	MPP28_GPIO,	/* Reset button */
+	MPP29_GPIO,	/* USB Copy button */
+	0
+};
+
+static void nas6210_power_off(void)
+{
+	gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
+}
+
+static void __init nas6210_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(nas6210_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&nas6210_ge00_data);
+	kirkwood_sata_init(&nas6210_sata_data);
+	kirkwood_uart0_init();
+	platform_device_register(&nas6210_leds);
+	platform_device_register(&nas6210_button_device);
+	if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = nas6210_power_off;
+	else
+		pr_err("nas6210: failed to configure power-off GPIO\n");
+}
+
+static int __init nas6210_pci_init(void)
+{
+	if (machine_is_nas6210()) {
+		u32 dev, rev;
+
+		kirkwood_pcie_id(&dev, &rev);
+		if (dev == MV88F6282_DEV_ID)
+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+		else
+			kirkwood_pcie_init(KW_PCIE0);
+	}
+
+	return 0;
+}
+subsys_initcall(nas6210_pci_init);
+
+MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
+	/* Maintainer: <gmbnomis at gmail dot com> */
+	.atag_offset	= 0x100,
+	.init_machine	= nas6210_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c
new file mode 100644
index 000000000..15dc526a8
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/arm/mach-kirkwood/nsa-310-setup.c
+ *
+ * ZyXEL NSA-310 Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NSA310_GPIO_LED_ESATA_GREEN	12
+#define NSA310_GPIO_LED_ESATA_RED	13
+#define NSA310_GPIO_LED_USB_GREEN	15
+#define NSA310_GPIO_LED_USB_RED		16
+#define NSA310_GPIO_USB_POWER_OFF	21
+#define NSA310_GPIO_LED_SYS_GREEN	28
+#define NSA310_GPIO_LED_SYS_RED		29
+#define NSA310_GPIO_KEY_RESTART		36
+#define NSA310_GPIO_KEY_COPY		37
+#define NSA310_GPIO_LED_COPY_GREEN	39
+#define NSA310_GPIO_LED_COPY_RED	40
+#define NSA310_GPIO_LED_HDD_GREEN	41
+#define NSA310_GPIO_LED_HDD_RED		42
+#define NSA310_GPIO_BUZZER		44
+#define NSA310_GPIO_KEY_POWER		46
+#define NSA310_GPIO_POWER_OFF		48
+
+
+static unsigned int nsa310_mpp_config[] __initdata = {
+	MPP12_GPIO,
+	MPP13_GPIO,
+	MPP15_GPIO,
+	MPP16_GPIO,
+	MPP21_GPIO,
+	MPP28_GPIO,
+	MPP29_GPIO,
+	MPP36_GPIO,
+	MPP37_GPIO,
+	MPP39_GPIO,
+	MPP40_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP44_GPIO,
+	MPP46_GPIO,
+	MPP48_GPIO,
+	0
+};
+
+static struct mtd_partition nsa310_mtd_parts[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0,
+		.size	= 0x100000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "uboot_env",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x80000,
+	}, {
+		.name	= "key_store",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x80000,
+	}, {
+		.name	= "info",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x80000,
+	}, {
+		.name	= "etc",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0xa00000,
+	}, {
+		.name	= "kernel_1",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0xa00000,
+	}, {
+		.name	= "rootfs1",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x2fc0000,
+	}, {
+		.name	= "kernel_2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0xa00000,
+	}, {
+		.name	= "rootfs2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 0x2fc0000,
+	},
+};
+
+static struct gpio_led nsa310_leds[] = {
+	{
+		.name	= "nsa310:green:sys",
+		.gpio	= NSA310_GPIO_LED_SYS_GREEN,
+	}, {
+		.name	= "nsa310:red:sys",
+		.gpio	= NSA310_GPIO_LED_SYS_RED,
+	}, {
+		.name	= "nsa310:green:hdd",
+		.gpio	= NSA310_GPIO_LED_HDD_GREEN,
+	}, {
+		.name	= "nsa310:red:hdd",
+		.gpio	= NSA310_GPIO_LED_HDD_RED,
+	}, {
+		.name	= "nsa310:green:esata",
+		.gpio	= NSA310_GPIO_LED_ESATA_GREEN,
+	}, {
+		.name	= "nsa310:red:esata",
+		.gpio	= NSA310_GPIO_LED_ESATA_RED,
+	}, {
+		.name	= "nsa310:green:usb",
+		.gpio	= NSA310_GPIO_LED_USB_GREEN,
+	}, {
+		.name	= "nsa310:red:usb",
+		.gpio	= NSA310_GPIO_LED_USB_RED,
+	}, {
+		.name	= "nsa310:green:copy",
+		.gpio	= NSA310_GPIO_LED_COPY_GREEN,
+	}, {
+		.name	= "nsa310:red:copy",
+		.gpio	= NSA310_GPIO_LED_COPY_RED,
+	},
+};
+
+static struct gpio_led_platform_data nsa310_leds_data = {
+	.leds		= nsa310_leds,
+	.num_leds	= ARRAY_SIZE(nsa310_leds),
+};
+
+static struct platform_device nsa310_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &nsa310_leds_data,
+	}
+};
+
+static struct gpio_keys_button nsa310_buttons[] = {
+	{
+		.desc		= "Power Button",
+		.code		= KEY_POWER,
+		.type		= EV_KEY,
+		.gpio		= NSA310_GPIO_KEY_POWER,
+		.debounce_interval = 1000,
+	}, {
+		.desc		= "Copy Button",
+		.code		= KEY_COPY,
+		.type		= EV_KEY,
+		.gpio		= NSA310_GPIO_KEY_COPY,
+		.active_low	= 1,
+		.debounce_interval = 1000,
+	}, {
+		.desc		= "Reset Button",
+		.code		= KEY_RESTART,
+		.type		= EV_KEY,
+		.gpio		= NSA310_GPIO_KEY_RESTART,
+		.active_low	= 1,
+		.debounce_interval = 1000,
+	},
+};
+
+static struct gpio_keys_platform_data nsa310_keys_data = {
+	.buttons	= nsa310_buttons,
+	.nbuttons	= ARRAY_SIZE(nsa310_buttons),
+};
+
+static struct platform_device nsa310_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev = {
+		.platform_data  = &nsa310_keys_data,
+	}
+};
+
+static struct i2c_board_info __initdata nsa310_i2c_info[] = {
+        { I2C_BOARD_INFO("adt7476", 0x2e) },
+};
+
+static struct mv_sata_platform_data nsa310_sata_data = {
+	.n_ports	= 2,
+};
+
+static void nsa310_power_off(void)
+{
+	gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
+}
+
+static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
+				       const char *label)
+{
+	int err;
+
+	err = gpio_request_one(gpio, flags, label);
+	if (err)
+		pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
+			gpio, label, err);
+
+	return err;
+}
+
+static void __init nsa310_gpio_init(void)
+{
+	int err;
+
+	err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
+				  "Power Off");
+	if (!err)
+		pm_power_off = nsa310_power_off;
+
+	nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
+			    "USB Power Off");
+}
+
+static void __init nsa310_init(void)
+{
+	u32 dev, rev;
+
+	kirkwood_init();
+	kirkwood_mpp_conf(nsa310_mpp_config);
+
+	nsa310_gpio_init();
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_mtd_parts), 35);
+	kirkwood_ehci_init();
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	kirkwood_sata_init(&nsa310_sata_data);
+	kirkwood_uart0_init();
+
+	i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
+	kirkwood_i2c_init();
+
+	platform_device_register(&nsa310_leds_device);
+	platform_device_register(&nsa310_keys_device);
+}
+
+static int __init nsa310_pci_init(void)
+{
+	if (machine_is_nsa310())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(nsa310_pci_init);
+
+MACHINE_START(NSA310, "ZyXEL NSA-310")
+	.atag_offset	= 0x100,
+	.init_machine	= nsa310_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
+MACHINE_END