branch Attitude Adjustment

git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 files changed, 818 insertions, 0 deletions

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
new file mode 100644
index 000000000..69d7dc712
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
@@ -0,0 +1,69 @@
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0.1
+	option type	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+config interface wan
+	option ifname	eth1
+	option proto	dhcp
+
+config switch
+	option name	rtl8366s
+	option reset	1
+	option enable_vlan 1
+	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+	option blinkrate	2
+
+config switch_vlan
+	option device	rtl8366s
+	option vlan 	1
+	option ports	"0 1 2 3 5t"
+
+config switch_port
+	# Port 1 controls the GREEN configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+	# 14: Link (master); 15: separate register
+
+	option device		rtl8366s
+	option port		1
+	option led		6
+
+config switch_port
+	# Port 2 controls the ORANGE configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	
+	option device		rtl8366s
+	option port		2
+	option led		9
+
+config switch_port
+	# Port 5 controls the configuration of the WAN LED and the
+	# section does not correspond to a real switch port.
+	#
+	# To toggle the use of green or orange LEDs for the WAN port,
+	# see the LED setting for wndr3700:green:wan in /etc/config/system.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+
+	option device		rtl8366s
+	option port		5
+	option led		2
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
new file mode 100755
index 000000000..c3f97345c
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -0,0 +1,196 @@
+#!/bin/sh
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+#
+
+. /lib/ar71xx.sh
+
+status_led=""
+
+led_set_attr() {
+	[ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
+}
+
+status_led_set_timer() {
+	led_set_attr $status_led "trigger" "timer"
+	led_set_attr $status_led "delay_on" "$1"
+	led_set_attr $status_led "delay_off" "$2"
+}
+
+status_led_on() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 255
+}
+
+status_led_off() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 0
+}
+
+get_status_led() {
+	case $(ar71xx_board_name) in
+	alfa-nx)
+		status_led="alfa:green:led_8"
+		;;
+	all0305)
+		status_led="eap7660d:green:ds4"
+		;;
+	ap136)
+		status_led="ap136:green:status"
+		;;
+	ap81)
+		status_led="ap81:green:status"
+		;;
+	ap83)
+		status_led="ap83:green:power"
+		;;
+	ap96)
+		status_led="ap96:green:led2"
+		;;
+	aw-nr580)
+		status_led="aw-nr580:green:ready"
+		;;
+	bullet-m | rocket-m | nano-m | nanostation-m)
+		status_led="ubnt:green:link4"
+		;;
+	db120)
+		status_led="db120:green:status"
+		;;
+	dir-600-a1 |\
+	dir-615-e4)
+		status_led="d-link:green:power"
+		;;
+	dir-615-c1)
+		status_led="d-link:green:status"
+		;;
+	dir-825-b1)
+		status_led="d-link:orange:power"
+		;;
+	eap7660d)
+		status_led="eap7660d:green:ds4"
+		;;
+	hornet-ub)
+		status_led="alfa:blue:wps"
+		;;
+	ja76pf | \
+	ja76pf2)
+		status_led="jjplus:green:led1"
+		;;
+	ls-sr71)
+		status_led="ubnt:green:d22"
+		;;
+	mzk-w04nu | \
+	mzk-w300nh)
+		status_led="planex:green:status"
+		;;
+	nbg460n_550n_550nh)
+		status_led="nbg460n:green:power"
+		;;
+	om2p | \
+	om2p-lc)
+		status_led="om2p:blue:power"
+		;;
+	pb44)
+		status_led="pb44:amber:jump1"
+		;;
+	rb-411 | rb-411u | rb-433 | rb-433u | rb-450 | rb-450g | rb-493)
+		status_led="rb4xx:yellow:user"
+		;;
+       rb-750)
+               status_led="rb750:green:act"
+               ;;
+	routerstation | routerstation-pro)
+		status_led="ubnt:green:rf"
+		;;
+	rw2458n)
+		status_led="rw2458n:green:d3"
+		;;
+	tew-632brp)
+		status_led="tew-632brp:green:status"
+		;;
+	tew-673gru)
+		status_led="trendnet:blue:wps"
+		;;
+	tew-712br)
+		status_led="trendnet:green:power"
+		;;
+	tl-mr3020)
+		status_led="tp-link:green:wps"
+		;;
+	tl-mr3220 | \
+	tl-mr3420 | \
+	tl-wa901nd | \
+	tl-wa901nd-v2 | \
+	tl-wr1041n-v2 | \
+	tl-wr1043nd | \
+	tl-wr741nd | \
+	tl-wr741nd-v4 | \
+	tl-wr841n-v1 | \
+	tl-wr841n-v7 | \
+	tl-wr841n-v8 | \
+	tl-wr941nd)
+		status_led="tp-link:green:system"
+		;;
+	tl-wdr4300 | \
+	tl-wr703n)
+		status_led="tp-link:blue:system"
+		;;
+	tl-wr2543n)
+		status_led="tp-link:green:wps"
+		;;
+	unifi)
+		status_led="ubnt:green:dome"
+		;;
+	whr-g301n | \
+	whr-hp-g300n | \
+	whr-hp-gn | \
+	wzr-hp-g300nh)
+		status_led="buffalo:green:router"
+		;;
+	wlae-ag300n)
+		status_led="buffalo:green:status"
+		;;
+	wzr-hp-ag300h | \
+	wzr-hp-g300nh2)
+		status_led="buffalo:red:diag"
+		;;
+	wndr3700)
+		status_led="wndr3700:green:power"
+		;;
+	wnr2000)
+		status_led="wnr2000:green:power"
+		;;
+	wp543)
+		status_led="wp543:green:diag"
+		;;
+	wrt400n)
+		status_led="wrt400n:blue:wps"
+		;;
+	wrt160nl)
+		status_led="wrt160nl:blue:wps"
+		;;
+	zcn-1523h-2 | zcn-1523h-5)
+		status_led="zcn-1523h:amber:init"
+		;;
+	esac;
+}
+
+set_state() {
+	get_status_led
+
+	case "$1" in
+	preinit)
+		insmod leds-gpio
+		insmod ledtrig-default-on
+		insmod ledtrig-timer
+		status_led_set_timer 200 200
+		;;
+	failsafe)
+		status_led_set_timer 50 50
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
new file mode 100644
index 000000000..102415009
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# For AR9220 and AR9223, GPIO JTAG must explicit be disabled
+# before LEDs start working. Do this when wifi device is
+# detected.
+
+#
+# $DEVPATH is not valid for some boards (including WZR-HP-AG300H).
+# Manipulate the $DEVPATH to reach the corresponding phyN.
+#
+
+devdir=`dirname $DEVPATH`
+devdir=`dirname $devdir`
+phydir=/sys$devdir/ieee80211
+phyname=`cat $phydir/phy*/name`
+
+if [ -z $phyname -o $ACTION != "add" ]; then exit 0; fi
+
+#
+# ar922x_disable_gpio_jtag():
+#
+# Emulate
+#       REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
+# for AR9220 and AR9223.
+#
+
+ar922x_disable_gpio_jtag()                 
+{                                          
+        local regidx=0x4054               
+        
+	[ -f /sys/kernel/debug/ieee80211/$1/ath9k/regidx ] && {
+		echo $regidx > /sys/kernel/debug/ieee80211/$1/ath9k/regidx
+        	regval=`cat /sys/kernel/debug/ieee80211/$1/ath9k/regval`
+        	regval=$((regval | 0x20000))
+        	echo regval $regval
+    		echo $regval > /sys/kernel/debug/ieee80211/$1/ath9k/regval
+        }
+}
+
+if [ $phyname -a $ACTION = "add" ]; then
+
+	. /lib/ar71xx.sh
+	
+	case $(ar71xx_board_name) in
+		wzr-hp-ag300h)
+			ar922x_disable_gpio_jtag $phyname
+			;;
+	esac;
+fi
+
+exit 0
diff --git a/target/linux/ar71xx/base-files/etc/init.d/defconfig b/target/linux/ar71xx/base-files/etc/init.d/defconfig
new file mode 100755
index 000000000..364fa4a6a
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/init.d/defconfig
@@ -0,0 +1,20 @@
+#!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+
+START=05
+
+start() {
+	. /lib/ar71xx.sh
+
+	local board=$(ar71xx_board_name)
+
+	[ ! -d /etc/defconfig/$board ] && return 0
+
+	for f in $( ls /etc/defconfig/$board ); do
+		if [ ! -e /etc/config/$f ]; then
+			cp /etc/defconfig/$board/$f /etc/config/
+		fi
+	done
+}
diff --git a/target/linux/ar71xx/base-files/etc/inittab b/target/linux/ar71xx/base-files/etc/inittab
new file mode 100644
index 000000000..17f829f6d
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/inittab
@@ -0,0 +1,2 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/inittab-console-fixup b/target/linux/ar71xx/base-files/etc/uci-defaults/inittab-console-fixup
new file mode 100755
index 000000000..4098b37a7
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/inittab-console-fixup
@@ -0,0 +1,27 @@
+#!/bin/sh
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+enable_console_login() {
+	local cons=$1
+	local initline="$cons::askfirst:/bin/ash --login"
+
+	grep -qs "^$initline" /etc/inittab || {
+		echo "$initline" >> /etc/inittab
+		sync
+		kill -HUP 1
+	}
+}
+
+inittab_console_fixup() {
+	for cons in ttyS0 ttyATH0; do
+		grep -qs "console=$cons" /proc/cmdline && {
+			enable_console_login $cons
+		}
+	done
+}
+
+inittab_console_fixup
+
+exit 0
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
new file mode 100755
index 000000000..cb4b68299
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
@@ -0,0 +1,209 @@
+#!/bin/sh
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/ar71xx.sh
+
+board=$(ar71xx_board_name)
+
+case "$board" in
+alfa-nx)
+	ucidef_set_led_netdev "wan" "WAN" "alfa:green:led_2" "eth0"
+	ucidef_set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1"
+	;;
+
+all0258n)
+	ucidef_set_rssimon "wlan0" "40000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "all0258n:red:rssilow" "wlan0" "1" "40" "0" "6"
+	ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0258n:yellow:rssimedium" "wlan0" "30" "80" "-29" "5"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0258n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
+	;;
+
+all0315n)
+	ucidef_set_rssimon "wlan0" "40000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "all0315n:red:rssilow" "wlan0" "1" "40" "0" "6"
+	ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0315n:yellow:rssimedium" "wlan0" "30" "80" "-29" "5"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0315n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
+	;;
+
+ap113)
+	ucidef_set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
+	;;
+
+db120)
+	ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
+	;;
+
+rb750)
+	ucidef_set_led_default "act" "act" "rb750:green:act" "1"
+	ucidef_set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
+	ucidef_set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10"
+	ucidef_set_led_switch "port3" "port3" "rb750:green:port3" "switch0" "0x08"
+	ucidef_set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04"
+	ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
+	;;
+
+dir-600-a1|\
+dir-615-e4)
+	ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "d-link:green:lan1" "switch0" "0x02"
+	ucidef_set_led_switch "lan2" "LAN2" "d-link:green:lan2" "switch0" "0x04"
+	ucidef_set_led_switch "lan3" "LAN3" "d-link:green:lan3" "switch0" "0x08"
+	ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10"
+	;;
+
+dir-825-b1)
+	ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
+	;;
+
+hornet-ub)
+	ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0"
+	ucidef_set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1"
+	ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
+	ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
+	;;
+
+mzk-w04u)
+	ucidef_set_led_usbdev "usb" "USB" "planex:green:usb" "1-1"
+	;;
+
+mzk-w300nh)
+	ucidef_set_led_wlan "wlan" "WLAN" "planex:green:wlan" "phy0tpt"
+	;;
+
+nbg460n_550n_550nh)
+	ucidef_set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt"
+	;;
+
+om2p | \
+om2p-lc)
+	ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
+	ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
+	;;
+
+tew-712br)
+	ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "trendnet:green:lan1" "switch0" "0x02"
+	ucidef_set_led_switch "lan2" "LAN2" "trendnet:green:lan2" "switch0" "0x04"
+	ucidef_set_led_switch "lan3" "LAN3" "trendnet:green:lan3" "switch0" "0x08"
+	ucidef_set_led_switch "lan4" "LAN4" "trendnet:green:lan4" "switch0" "0x10"
+	ucidef_set_led_wlan "wlan" "WLAN" "trendnet:green:wlan" "phy0tpt"
+	;;
+
+tl-mr11u | \
+tl-mr3020 | \
+tl-mr3040)
+	ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
+	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan"  "eth0"
+	;;
+
+tl-mr3220 | \
+tl-mr3420 )
+	ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
+	;;
+
+tl-wa901nd)
+	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
+	;;
+
+tl-wa901nd-v2)
+	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+	;;
+
+tl-wdr4300)
+	ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1.1"
+	ucidef_set_led_usbdev "usb2" "USB2" "tp-link:green:usb2" "1-1.2"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt"
+	;;
+
+tl-wr741nd)
+	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
+	;;
+
+tl-wr741nd-v4)
+	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+	;;
+
+tl-wr841n-v8)
+	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+	;;
+
+tl-wr941nd | \
+tl-wr1041n-v2)
+	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+	;;
+
+tl-wr1043nd)
+	ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
+	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+	;;
+
+tl-wr2543n)
+	ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
+	;;
+
+wrt160nl)
+	ucidef_set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt"
+	;;
+
+wndr3700)
+	ucidef_set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
+	ucidef_set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
+	;;
+
+whr-g301n |\
+whr-hp-g300n |\
+whr-hp-gn)
+	ucidef_set_led_netdev "wan" "WAN" "buffalo:green:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "buffalo:green:lan1" "switch0" "0x02"
+	ucidef_set_led_switch "lan2" "LAN2" "buffalo:green:lan2" "switch0" "0x04"
+	ucidef_set_led_switch "lan3" "LAN3" "buffalo:green:lan3" "switch0" "0x08"
+	ucidef_set_led_switch "lan4" "LAN4" "buffalo:green:lan4" "switch0" "0x10"
+	;;
+
+wlae-ag300n)
+	ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
+	;;
+
+wzr-hp-ag300h)
+	ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
+	ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1"
+	ucidef_set_led_usbdev "usb" "USB" "buffalo:green:usb" "1-1"
+	;;
+
+wzr-hp-g300nh)
+	ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt"
+	ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
+	ucidef_set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1"
+	;;
+
+zcn-1523h-2)
+	ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
+	;;
+
+zcn-1523h-5)
+	ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "lan2" "zcn-1523h:green:lan2" "eth1"
+	;;
+esac
+
+ucidef_commit_leds
+
+exit 0
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network
new file mode 100755
index 000000000..cd9e997d8
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network
@@ -0,0 +1,215 @@
+#!/bin/sh
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+[ -e /etc/config/network ] && exit 0
+
+touch /etc/config/network
+
+. /lib/functions/uci-defaults.sh
+. /lib/ar71xx.sh
+
+ucidef_set_interface_loopback
+
+board=$(ar71xx_board_name)
+
+case "$board" in
+all0315n |\
+all0258n |\
+ja76pf2)
+	ucidef_set_interface_lan "eth0 eth1"
+	;;
+
+db120 |\
+rb-2011l | \
+rb-2011uas-2hnd)
+	ucidef_set_interfaces_lan_wan "eth0.1 eth1" "eth0.2"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
+	ucidef_add_switch_vlan "eth0" "2" "0t 1"
+	ucidef_add_switch "eth1" "1" "1"
+	ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5"
+	;;
+
+dir-825-b1|\
+tew-673gru)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+	ucidef_add_switch "rtl8366s" "1" "1"
+	ucidef_add_switch_vlan "rtl8366s" "1" "0 1 2 3 5t"
+	;;
+
+nbg460n_550n_550nh)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	ucidef_add_switch "rtl8366s" "1" "1"
+	ucidef_add_switch_vlan "rtl8366s" "0" "0 1 2 3 5"
+	;;
+
+rb-433 |\
+rb-433u)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "1 2 5"
+	;;
+
+rb-450)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	ucidef_add_switch "eth1" "1" "1"
+	ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 5"
+	;;
+
+rb-450g |\
+routerstation-pro)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+	;;
+
+ap136 |\
+rb-750gl |\
+rb-751g |\
+wzr-hp-g450h)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
+	ucidef_add_switch_vlan "switch0" "2" "0t 1"
+	;;
+
+rb-493g)
+	ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+	ucidef_add_switch "switch1" "1" "1"
+	ucidef_add_switch_vlan "switch1" "1" "0t 1 2 3 4"
+	ucidef_add_switch_vlan "switch1" "2" "0t 5"
+	;;
+
+wzr-hp-g300nh2 |\
+pb92 |\
+ap113)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0t 1 3 4 5"
+	ucidef_add_switch_vlan "eth0" "2" "0t 2"
+	;;
+
+tl-wdr4300|\
+tl-wr1041n-v2)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
+	ucidef_add_switch_vlan "eth0" "2" "0t 1"
+	;;
+
+tl-wr1043nd)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "rtl8366rb" "1" "1"
+	ucidef_add_switch_vlan "rtl8366rb" "1" "1 2 3 4 5t"
+	ucidef_add_switch_vlan "rtl8366rb" "2" "0 5t"
+	;;
+
+tl-wr2543n)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
+	ucidef_add_switch_vlan "switch0" "2" "0 9t"
+	;;
+
+tl-wr841n-v1|\
+tl-wr941nd)
+	ucidef_set_interface_raw "eth" "eth0"
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+	;;
+
+tl-wr841n-v8)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+	;;
+
+wrt160nl)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
+	;;
+
+wzr-hp-g300nh)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+	;;
+
+all0305 |\
+aw-nr580 |\
+bullet-m |\
+eap7660d |\
+ew-dorin |\
+rb-411 |\
+tl-mr11u |\
+tl-mr3020 |\
+tl-mr3040 |\
+tl-wa901nd |\
+tl-wa901nd-v2 |\
+tl-wr703n |\
+wp543)
+	ucidef_set_interface_lan "eth0"
+	;;
+
+alfa-ap96 |\
+alfa-nx |\
+ap83 |\
+jwap003 |\
+pb42 |\
+pb44 |\
+routerstation|\
+wpe72)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	;;
+
+ap121 |\
+ap121-mini |\
+ap96 |\
+airrouter |\
+dir-600-a1 |\
+dir-615-c1 |\
+dir-615-e4 |\
+ja76pf |\
+rb-750 |\
+rb-751 |\
+tew-632brp |\
+tew-712br |\
+tl-mr3220 |\
+tl-mr3420 |\
+tl-wr741nd |\
+tl-wr741nd-v4 |\
+tl-wr841n-v7 |\
+whr-g301n |\
+whr-hp-g300n |\
+whr-hp-gn |\
+wzr-hp-ag300h)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4"
+	;;
+
+wzr-hp-g450h)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
+	ucidef_add_switch_vlan "eth0" "2" "0t 1"
+	;;
+
+ew-dorin-router)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0 2 3"
+	;;
+
+*)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	;;
+esac
+
+uci commit network
+
+exit 0
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/vlan-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/vlan-migration
new file mode 100755
index 000000000..bea9493c8
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/vlan-migration
@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+local dev="$(uci -q get network.@switch_vlan[0].device)"
+local vlan="$(uci -q get network.@switch_vlan[0].vlan)"
+
+if [ "$dev" = "rtl8366s" ] && [ "$vlan" = 0 ]; then
+	logger -t vlan-migration "VLAN 0 is invalid for RTL8366s, changing to 1"
+	uci set network.@switch_vlan[0].vlan=1
+	uci commit network
+fi
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/wrt160nl b/target/linux/ar71xx/base-files/etc/uci-defaults/wrt160nl
new file mode 100755
index 000000000..dce28dde9
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/wrt160nl
@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+. /lib/ar71xx.sh
+
+board=$(ar71xx_board_name)
+
+wrt160nl_fixtrx() {
+	mtd -o 32 fixtrx firmware
+}
+
+if [ "${board}" == "wrt160nl" ]; then
+	wrt160nl_fixtrx
+fi