branch Attitude Adjustment

git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 240 insertions, 0 deletions

diff --git a/target/linux/adm5120/base-files/etc/config/network b/target/linux/adm5120/base-files/etc/config/network
new file mode 100644
index 000000000..df2f20105
--- /dev/null
+++ b/target/linux/adm5120/base-files/etc/config/network
@@ -0,0 +1,27 @@
+#### VLAN configuration 
+config switch
+	option eth0	"0 1 2 3"
+	option eth1	"4"
+
+
+#### Loopback configuration
+config interface loopback
+	option ifname	"lo"
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+
+#### LAN configuration
+config interface lan
+	option type 	bridge
+	option ifname	"eth0"
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+
+#### WAN configuration
+config interface	wan
+	option ifname	"eth1"
+	option proto	dhcp
diff --git a/target/linux/adm5120/base-files/etc/config/system b/target/linux/adm5120/base-files/etc/config/system
new file mode 100644
index 000000000..ea54ca1dc
--- /dev/null
+++ b/target/linux/adm5120/base-files/etc/config/system
@@ -0,0 +1,40 @@
+config system
+	option hostname	OpenWrt
+	option timezone	UTC
+
+config timeserver ntp
+	list server	0.openwrt.pool.ntp.org
+	list server	1.openwrt.pool.ntp.org
+	list server	2.openwrt.pool.ntp.org
+	list server	3.openwrt.pool.ntp.org
+
+config led
+	option sysfs		lan1
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		lan2
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		lan3
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		lan4
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		wan
+	option trigger		port_state
+	option port_state	link_act
+
+config led
+	option sysfs		wlan
+	option trigger		netdev
+	option dev		wlan0
+
diff --git a/target/linux/adm5120/base-files/etc/diag.sh b/target/linux/adm5120/base-files/etc/diag.sh
new file mode 100755
index 000000000..3a66dfc87
--- /dev/null
+++ b/target/linux/adm5120/base-files/etc/diag.sh
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+#
+
+. /lib/adm5120.sh
+
+led_set_attr() {
+	[ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
+}
+
+status_led_set_timer() {
+	led_set_attr $status_led "trigger" "timer"
+	led_set_attr $status_led "delay_on" "$1"
+	led_set_attr $status_led "delay_off" "$2"
+}
+
+status_led_set_morse() {
+	led_set_attr $status_led "trigger" "morse"
+	led_set_attr $status_led "delay" "$1"
+	led_set_attr $status_led "message" "$2"
+}
+
+status_led_on() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 255
+}
+
+status_led_off() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 0
+}
+
+set_state() {
+	case "$1" in
+	preinit)
+		insmod leds-gpio
+		status_led_set_timer 200 200
+		;;
+	failsafe)
+		status_led_set_timer 50 50
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}
diff --git a/target/linux/adm5120/base-files/lib/adm5120.sh b/target/linux/adm5120/base-files/lib/adm5120.sh
new file mode 100755
index 000000000..496fc06f3
--- /dev/null
+++ b/target/linux/adm5120/base-files/lib/adm5120.sh
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+#
+
+board_name=""
+status_led=""
+sys_mtd_part=""
+
+adm5120_detect() {
+	board_name=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
+
+	case "$board_name" in
+	"Cellvision"*)
+		status_led="status"
+		sys_mtd_part="firmware"
+		;;
+	"Compex"*)
+		status_led="diag"
+		case "$board_name" in
+		*-WRT)
+			sys_mtd_part="trx"
+			;;
+		*)
+			sys_mtd_part="partition1"
+			;;
+		esac
+		;;
+	"Edimax"*)
+		status_led="power"
+		sys_mtd_part="firmware"
+		;;
+	"Infineon"*)
+		sys_mtd_part="firmware"
+		;;
+	"Mikrotik"*)
+		status_led="power"
+		;;
+	"ZyXEL"*)
+		status_led="power"
+		sys_mtd_part="trx"
+		;;
+	"EB-214A"*)
+		status_led="power"
+		sys_mtd_part="firmware"
+		;;
+	*)
+		;;
+	esac
+}
+
+adm5120_detect
diff --git a/target/linux/adm5120/base-files/lib/preinit/05_preinit_do_adm5120.sh b/target/linux/adm5120/base-files/lib/preinit/05_preinit_do_adm5120.sh
new file mode 100644
index 000000000..4fca1e71b
--- /dev/null
+++ b/target/linux/adm5120/base-files/lib/preinit/05_preinit_do_adm5120.sh
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+do_adm5120() {
+	. /lib/adm5120.sh
+}
+
+boot_hook_add preinit_main do_adm5120
diff --git a/target/linux/adm5120/base-files/lib/preinit/05_reset_button_adm5120 b/target/linux/adm5120/base-files/lib/preinit/05_reset_button_adm5120
new file mode 100644
index 000000000..44f164adb
--- /dev/null
+++ b/target/linux/adm5120/base-files/lib/preinit/05_reset_button_adm5120
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+enable_reset_button() {
+	insmod input-core
+	insmod input-polldev
+	insmod gpio_buttons
+	insmod button-hotplug
+}
+
+boot_hook_add preinit_main enable_reset_button
+
+
diff --git a/target/linux/adm5120/base-files/lib/preinit/05_set_preinit_iface_adm5120 b/target/linux/adm5120/base-files/lib/preinit/05_set_preinit_iface_adm5120
new file mode 100644
index 000000000..ac2a7cbb6
--- /dev/null
+++ b/target/linux/adm5120/base-files/lib/preinit/05_set_preinit_iface_adm5120
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+set_preinit_ifname() {
+	ifname=eth0
+}
+
+boot_hook_add preinit_main set_preinit_ifname
+
+
diff --git a/target/linux/adm5120/base-files/lib/upgrade/platform.sh b/target/linux/adm5120/base-files/lib/upgrade/platform.sh
new file mode 100644
index 000000000..f067089fa
--- /dev/null
+++ b/target/linux/adm5120/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,44 @@
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+
+. /lib/adm5120.sh
+
+PART_NAME="firmware"
+RAMFS_COPY_DATA=/lib/adm5120.sh
+
+platform_check_image() {
+	local magic="$(get_magic_word "$1")"
+
+	[ "$ARGC" -gt 1 ] && return 1
+
+	case "$board_name" in
+	"ZyXEL"*|"Compex WP54 family")
+		# .trx files
+		[ "$magic" != "4844" ] && {
+			echo "Invalid image type."
+			return 1
+		}
+		return 0
+		;;
+	*)
+		;;
+	esac
+
+	echo "Sysupgrade is not yet supported on $board_name."
+	return 1
+}
+
+platform_do_upgrade() {
+	PART_NAME="$sys_mtd_part"
+	default_do_upgrade "$ARGV"
+}
+
+disable_watchdog() {
+	killall watchdog
+	( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
+		echo 'Could not disable watchdog'
+		return 1
+	}
+}
+append sysupgrade_pre_upgrade disable_watchdog