branch Attitude Adjustment

git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 105 insertions, 0 deletions

diff --git a/package/madwifi/patches/383-ibss_hostap.patch b/package/madwifi/patches/383-ibss_hostap.patch
new file mode 100644
index 000000000..d449c3037
--- /dev/null
+++ b/package/madwifi/patches/383-ibss_hostap.patch
@@ -0,0 +1,105 @@
+--- a/ath/if_ath.c
++++ b/ath/if_ath.c
+@@ -1452,6 +1452,23 @@ ath_vap_create(struct ieee80211com *ic,
+ 		sc->sc_nstavaps++;
+ 	else if (opmode == IEEE80211_M_MONITOR)
+ 		sc->sc_nmonvaps++;
++
++
++	/* Driving the HAL in IBSS sometimes adapts the TSF and other timing registers
++	 * from received beacons/probes. If that happens, expected TX interrupts may
++	 * not occur until next reset. Which triggers the "lost beacon" tasklet.
++	 * Resulting effectively in not sending packets for minutes. Because that only
++	 * happens in large mesh networks, this mode needs to be activated by a kernel
++	 * module parameter: hostap_for_ibss=1. Note that using this mode has side
++	 * effects. Such as not supressing beacons/probe answers randomly when
++	 * receiving other node beacons. It's recommended to lower the beacon interval
++	 * then. When using an IBSS-VAP together with an HOSTAP-VAP, you may also need
++	 * to re-trigger IBSS beacon generation after creating the HOSTAP-VAP by
++	 * issueing "iwpriv athX bintval 1000".
++	 */
++	if ((flags & IEEE80211_NO_STABEACONS) && (ic->ic_opmode == IEEE80211_M_IBSS))
++		sc->sc_opmode = HAL_M_HOSTAP;
++	else
+ 	/*
+ 	 * Adhoc demo mode is a pseudo mode; to the HAL it's
+ 	 * just IBSS mode and the driver doesn't use management
+@@ -4279,7 +4296,8 @@ ath_calcrxfilter(struct ath_softc *sc)
+ 	if (ic->ic_opmode != IEEE80211_M_HOSTAP && (dev->flags & IFF_PROMISC))
+ 		rfilt |= HAL_RX_FILTER_PROM;
+ 	if (ic->ic_opmode == IEEE80211_M_STA ||
+-	    sc->sc_opmode == HAL_M_IBSS ||	/* NB: AHDEMO too */
++	    ic->ic_opmode == IEEE80211_M_IBSS ||
++	    ic->ic_opmode == IEEE80211_M_AHDEMO ||
+ 	    (sc->sc_nostabeacons) || sc->sc_scanning ||
+ 		(ic->ic_opmode == IEEE80211_M_HOSTAP))
+ 		rfilt |= HAL_RX_FILTER_BEACON;
+@@ -6435,6 +6453,33 @@ ath_capture(struct net_device *dev, cons
+ }
+ 
+ /*
++ * Advances (forwards/adds) a microsecond value to current chip's TSF registers
++ */
++
++/* from ath_info.c */
++#define AR5K_TSF_L32_5210		0x806c	/* TSF (lower 32 bits) */
++#define AR5K_TSF_L32_5211		0x804c
++#define AR5K_TSF_L32			(ar_device(ah->ah_sc->devid) == 5210 ? \
++					AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
++
++#define AR5K_TSF_U32_5210		0x8070
++#define AR5K_TSF_U32_5211		0x8050
++#define AR5K_TSF_U32			(ar_device(ah->ah_sc->devid) == 5210 ? \
++					AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
++
++static inline void ath_hal_settsf64(struct ath_hal *ah, u_int64_t tsf_adv)
++{
++	ATH_HAL_LOCK_IRQ(ah->ah_sc);
++	ath_hal_set_function(__func__);
++	tsf_adv += ah->ah_getTsf64(ah);
++	OS_REG_WRITE(ah, AR5K_TSF_L32, 0ll);
++	OS_REG_WRITE(ah, AR5K_TSF_U32, (tsf_adv >> 32) & 0xffffffffll);
++	OS_REG_WRITE(ah, AR5K_TSF_L32, (tsf_adv >> 00) & 0xffffffffll);
++	ath_hal_set_function(NULL);
++	ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
++}
++
++/*
+  * Intercept management frames to collect beacon RSSI data and to do
+  * ibss merges. This function is called for all management frames,
+  * including those belonging to other BSS.
+@@ -6487,10 +6532,19 @@ ath_recv_mgmt(struct ieee80211vap * vap,
+ 			DPRINTF(sc, ATH_DEBUG_BEACON, 
+ 				"Updated beacon timers\n");
+ 		}
+-		if ((sc->sc_opmode == HAL_M_IBSS) &&
+-				IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid) &&
+-				ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval)) {
+-			DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
++		if ((vap->iv_opmode == IEEE80211_M_IBSS) &&
++				(sc->sc_opmode == HAL_M_HOSTAP) &&
++				IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) {
++			/* In this mode, we drive the HAL in HOSTAP mode. Hence
++			 * we do the IBSS merging in software. Also do not merge
++			 * if the difference it too small. Otherwise we are playing
++			 * tsf-pingpong with other vendors drivers */
++			beacon_tsf = le64_to_cpu(ni->ni_tstamp.tsf);
++			if (beacon_tsf > rtsf + 0xffff) {
++				ath_hal_settsf64(sc->sc_ah, beacon_tsf - rtsf);
++				ieee80211_ibss_merge(ni);
++			}
++			break;
+ 		}
+ 		/* NB: Fall Through */
+ 	case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
+@@ -6563,6 +6617,10 @@ ath_recv_mgmt(struct ieee80211vap * vap,
+ #endif
+ 			if (do_merge)
+ 				ieee80211_ibss_merge(ni);
++
++			if ((sc->sc_opmode == HAL_M_IBSS) &&
++					ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval))
++				DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
+ 		}
+ 		break;
+ 	}