openwrt/target/linux/ar71xx/files/arch, branch attitude

AA: ar71xx: add kernel support for the RB435G board

2012-11-25T16:22:38+00:00

Backport of r34239. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34354 3c298f89-4303-0410-b956-a3cf2f4a3e73

AA: ar71xx: update PCI IRQ map for RB4xx devices

2012-11-25T16:22:36+00:00

Backport of r34238. Should fix #12269. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34353 3c298f89-4303-0410-b956-a3cf2f4a3e73

AA: ar71xx: add kernel support for the OpenMesh MR600 board

2012-11-25T16:16:12+00:00

Backport of r34231. Signed-off-by: Marek Lindner Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34345 3c298f89-4303-0410-b956-a3cf2f4a3e73

AA: ar71xx: add support for TP-Link TL-WA7510N

2012-11-25T16:15:24+00:00

Backport of r34187. It is mostly the same as TL-WA901N. WLAN and LAN are working. LAN LED is working. WLAN signal strength LEDs are not working yet. http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n [juhosg: - cleanup commit message - move non kernel related stuff into separate changes - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch - merge WA7510N support into the mach-tl-wa901nd.c file - add 3.6 support] Signed-off-by: Stefan Helmert Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34335 3c298f89-4303-0410-b956-a3cf2f4a3e73

AA: ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio

2012-11-25T16:15:01+00:00

Backport of r34087. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34333 3c298f89-4303-0410-b956-a3cf2f4a3e73

AA: ar71xx: don't use the unknown LED on the ZCN-1523-5 board

2012-11-04T22:09:57+00:00

Backport of r34076. According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34077 3c298f89-4303-0410-b956-a3cf2f4a3e73

AA: ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards

2012-10-29T17:29:38+00:00

Bacport of r33993. The default pll_1000 value had to be changed in order to make it working. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33994 3c298f89-4303-0410-b956-a3cf2f4a3e73

AA: ar71xx: add support for the Senao CAP4200AG board

2012-10-28T12:24:39+00:00

Backport of r33956. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33977 3c298f89-4303-0410-b956-a3cf2f4a3e73

AA: ar71xx: rw2458n - fix flash parts

2012-10-19T19:45:18+00:00

Backport of r33867. See #12338. Redwave rw2458 has uboot, not redboot. Signed-off-by: Cezary Jackiewicz Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33883 3c298f89-4303-0410-b956-a3cf2f4a3e73

AA: ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines

2012-10-18T07:13:10+00:00

Backport of r33818. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33836 3c298f89-4303-0410-b956-a3cf2f4a3e73