# # Pine configuration file # # This file sets the configuration options used by Pine and PC-Pine. These # options are usually set from within Pine or PC-Pine. There may be a # system-wide configuration file which sets the defaults for some of the # variables. On Unix, run pine -conf to see how system defaults have been set. # For variables that accept multiple values, list elements are separated by # commas. A line beginning with a space or tab is considered to be a # continuation of the previous line. For a variable to be unset its value must # be blank. To set a variable to the empty string its value should be "". # You can override system defaults by setting a variable to the empty string. # Lines beginning with "#" are comments, and ignored by Pine. # Over-rides your full name from Unix password file. Required for PC-Pine. personal-name= # Sets domain part of From: and local addresses in outgoing mail. user-domain=alum.mit.edu # List of SMTP servers for sending mail. If blank: Unix Pine uses sendmail. smtp-server=outgoing.mit.edu/novalidate-cert # NNTP server for posting news. Also sets news-collections for news reading. nntp-server= # Path of (local or remote) INBOX, e.g. ={mail.somewhere.edu}inbox # Normal Unix default is the local INBOX (usually /usr/spool/mail/$USER). inbox-path={po11.mit.edu/ssl/user=bnewbold/novalidate-cert}INBOX # List of folder pairs; the first indicates a folder to archive, and the # second indicates the folder read messages in the first should # be moved to. incoming-archive-folders= # List of folders, assumed to be in first folder collection, # offered for pruning each month. For example: mumble pruned-folders= # Over-rides default path for sent-mail folder, e.g. =old-mail (using first # folder collection dir) or ={host2}sent-mail or ="" (to suppress saving). # Default: sent-mail (Unix) or SENTMAIL.MTX (PC) in default folder collection. default-fcc= # Over-rides default path for saved-msg folder, e.g. =saved-messages (using 1st # folder collection dir) or ={host2}saved-mail or ="" (to suppress saving). # Default: saved-messages (Unix) or SAVEMAIL.MTX (PC) in default collection. default-saved-msg-folder=archive # Over-rides default path for postponed messages folder, e.g. =pm (which uses # first folder collection dir) or ={host4}pm (using home dir on host4). # Default: postponed-msgs (Unix) or POSTPOND.MTX (PC) in default fldr coltn. postponed-folder= # If set, specifies where already-read messages will be moved upon quitting. read-message-folder= # If set, specifies where form letters should be stored. form-letter-folder= # Contains the actual signature contents as opposed to the signature filename. # If defined, this overrides the signature-file. Default is undefined. literal-signature= # Over-rides default path for signature file. Default is ~/.signature signature-file= # List of features; see Pine's Setup/options menu for the current set. # e.g. feature-list= select-without-confirm, signature-at-bottom # Default condition for all of the features is no-. feature-list=enable-flag-cmd, enable-flag-screen-keyword-shortcut, enable-unix-pipe-cmd, quell-dead-letter-on-cancel, quell-charset-warning, use-current-dir, prefer-plain-text, no-copy-to-address-to-from-if-it-is-us # Pine executes these keys upon startup (e.g. to view msg 13: i,j,1,3,CR,v) initial-keystroke-list= # Only show these headers (by default) when composing messages default-composer-hdrs= # Add these customized headers (and possible default values) when composing customized-hdrs=From:, Reply-To: # When viewing messages, include this list of headers viewer-hdrs= # When viewing messages, number of blank spaces between left display edge and text viewer-margin-left= # When viewing messages, number of blank spaces between right display edge and text viewer-margin-right= # When viewing messages, number of lines of quote displayed before suppressing quote-suppression-threshold= # Determines default folder name for Saves... # Choices: default-folder, by-sender, by-from, by-recipient, last-folder-used. # Default: "default-folder", i.e. "saved-messages" (Unix) or "SAVEMAIL" (PC). saved-msg-name-rule= # Determines default name for Fcc... # Choices: default-fcc, by-recipient, last-fcc-used. # Default: "default-fcc" (see also "default-fcc=" variable.) fcc-name-rule= # Sets presentation order of messages in Index. Choices: # Subject, From, Arrival, Date, Size, To, Cc, OrderedSubj, Score, and Thread. # Order may be reversed by appending /Reverse. Default: "Arrival". sort-key= # Sets presentation order of address book entries. Choices: dont-sort, # fullname-with-lists-last, fullname, nickname-with-lists-last, nickname # Default: "fullname-with-lists-last". addrbook-sort-rule= # Sets presentation order of folder list entries. Choices: alphabetical, # alpha-with-dirs-last, alpha-with-dirs-first. # Default: "alpha-with-directories-last". folder-sort-rule= # Sets the default folder and collectionoffered at the Goto Command's prompt. goto-default-rule= # Sets message which cursor begins on. Choices: first-unseen, first-recent, # first-important, first-important-or-unseen, first-important-or-recent, # first, last. Default: "first-unseen". incoming-startup-rule= # Allows a default answer for the prune folder questions. Choices: yes-ask, # yes-no, no-ask, no-no, ask-ask, ask-no. Default: "ask-ask". pruning-rule= # Controls behavior when reopening an already open folder. folder-reopen-rule= # Style that MESSAGE INDEX is displayed in when threading. threading-display-style= # Style of THREAD INDEX or default MESSAGE INDEX when threading. threading-index-style= # When threading, character used to indicate collapsed messages underneath. threading-indicator-character= # When threading, character used to indicate expanded messages underneath. threading-expanded-character= # When threading, character used to indicate this is the last reply # to the parent of this message. threading-lastreply-character= # Reflects capabilities of the display you have. Default: US-ASCII. # Typical alternatives include ISO-8859-x, (x is a number between 1 and 9). character-set= # Specifies the program invoked by ^_ in the Composer, # or the "enable-alternate-editor-implicitly" feature. editor= # Specifies the program invoked by ^T in the Composer. speller=/usr/bin/aspell --mode=email check # Specifies the column of the screen where the composer should wrap. composer-wrap-column= # Specifies the string to insert when replying to a message. reply-indent-string= # Specifies the introduction to insert when replying to a message. reply-leadin= # Specifies the string to replace quotes with when viewing a message. quote-replace-string= # Specifies the string to use when sending a message with no to or cc. empty-header-message= # Program to view images (e.g. GIF or TIFF attachments). image-viewer= # If "user-domain" not set, strips hostname in FROM address. (Unix only) use-only-domain-name= # This variable takes a list of programs that message text is piped into # after MIME decoding, prior to display. display-filters=_BEGINNING("-----BEGIN PGP")_ ~/bin/ez-pine-gpg-incoming # This defines a program that message text is piped into before MIME # encoding, prior to sending sending-filters=~/bin/ez-pine-gpg-sign-and-encrypt _INCLUDEALLHDRS_ _RECIPIENTS_, ~/bin/ez-pine-gpg-encrypt _RECIPIENTS_, ~/bin/ez-pine-gpg-sign _INCLUDEALLHDRS_, ~/bin/ez-pine-gpg-symmetric # A list of alternate addresses the user is known by alt-addresses=bnewbold@alum.mit.edu, bnewbold@mit.edu, bnewbold@cfa.harvard.edu, bnewbold@robocracy.org, bnewbold@gmail.com, bnewbold@leaflabs.com, bnewbold@bnewbold.net # A list of keywords for use in categorizing messages keywords= # Characters which surround keywords in SUBJKEY token. # Default is "{" "} " keyword-surrounding-chars= # This is a list of formats for address books. Each entry in the list is made # up of space-delimited tokens telling which fields are displayed and in # which order. See help text addressbook-formats= # This gives a format for displaying the index. It is made # up of space-delimited tokens telling which fields are displayed and in # which order. See help text index-format= # The number of lines of overlap when scrolling through message text viewer-overlap= # Number of lines from top and bottom of screen where single # line scrolling occurs. scroll-margin= # The number of seconds to sleep after writing a status message status-message-delay= # The approximate number of seconds between checks for new mail mail-check-interval= # The approximate number of seconds between checks for new mail in folders # other than the current folder and inbox. # Default is same as mail-check-interval mail-check-interval-noncurrent= # The minimum number of seconds between checks for new mail in a Mail Drop. # This is always effectively at least as large as the mail-check-interval maildrop-check-minimum= # For newsgroups accessed using NNTP, only messages numbered in the range # lastmsg-range+1 to lastmsg will be considered nntp-range= # Full path and name of NEWSRC file newsrc-path= # Path and filename of news configuration's active file. # The default is typically "/usr/lib/news/active". news-active-file-path= # Directory containing system's news data. # The default is typically "/usr/spool/news" news-spool-directory= # Path and filename of the program used to upload text from your terminal # emulator's into Pine's composer. upload-command= # Text sent to terminal emulator prior to invoking the program defined by # the upload-command variable. # Note: _FILE_ will be replaced with the temporary file used in the upload. upload-command-prefix= # Path and filename of the program used to download text via your terminal # emulator from Pine's export and save commands. download-command= # Text sent to terminal emulator prior to invoking the program defined by # the download-command variable. # Note: _FILE_ will be replaced with the temporary file used in the downlaod. download-command-prefix= # Sets the search path for the mailcap configuration file. # NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2. mailcap-search-path= # Sets the search path for the mimetypes configuration file. # NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2. mimetype-search-path= # List of programs to open Internet URLs (e.g. http or ftp references). url-viewers=/usr/bin/chromium-browser # The maximum number of non-stayopen remote connections that pine will use max-remote-connections= # A list of folders that should be left open once opened (INBOX is implicit) stay-open-folders= # Specifies the number of dead letter files to keep when canceling. dead-letter-files= # Sets the filename for the newmail fifo (named pipe). Unix only. newmail-fifo-path= # Sets the width for the NewMail screen. newmail-window-width= # List of incoming msg folders besides INBOX, e.g. ={host2}inbox, {host3}inbox # Syntax: optnl-label {optnl-imap-host-name}folder-path incoming-folders= # List of directories where saved-message folders may be. First one is # the default for Saves. Example: Main {host1}mail/[], Desktop mail\[] # Syntax: optnl-label {optnl-imap-hostname}optnl-directory-path[] folder-collections="MIT Athena" {po11.mit.edu/ssl/user=bnewbold/novalidate-cert}INBOX.[], mail/[] # List, only needed if nntp-server not set, or news is on a different host # than used for NNTP posting. Examples: News *[] or News *{host3/nntp}[] # Syntax: optnl-label *{news-host/protocol}[] news-collections= # List of file or path names for personal addressbook(s). # Default: ~/.addressbook (Unix) or \PINE\ADDRBOOK (PC) # Syntax: optnl-label path-name address-book= # List of file or path names for global/shared addressbook(s). # Default: none # Syntax: optnl-label path-name global-address-book= # Set by Pine; controls beginning-of-month sent-mail pruning. last-time-prune-questioned=199.11 # Set by Pine; controls display of "new version" message. last-version-used=6.02 # This names the path to an alternative program, and any necessary arguments, # to be used in posting mail messages. Example: # /usr/lib/sendmail -oem -t -oi # or, # /usr/local/bin/sendit.sh # The latter a script found in Pine distribution's contrib/util directory. # NOTE: The program MUST read the message to be posted on standard input, # AND operate in the style of sendmail's "-t" option. sendmail-path= # This names the root of the tree to which the user is restricted when reading # and writing folders and files. For example, on Unix ~/work confines the # user to the subtree beginning with their work subdirectory. # (Note: this alone is not sufficient for preventing access. You will also # need to restrict shell access and so on, see Pine Technical Notes.) # Default: not set (so no restriction) operating-dir= # If no user input for this many hours, Pine will exit if in an idle loop # waiting for a new command. If set to zero (the default), then there will # be no timeout. user-input-timeout= # Sets the time in seconds that Pine will attempt to open a network # connection. The default is 30, the minimum is 5, and the maximum is # system defined (typically 75). tcp-open-timeout= # Network read warning timeout. The default is 15, the minimum is 5, and the # maximum is 1000. tcp-read-warning-timeout= # Network write warning timeout. The default is 0 (unset), the minimum # is 5 (if not 0), and the maximum is 1000. tcp-write-warning-timeout= # If this much time has elapsed at the time of a tcp read or write # timeout, pine will ask if you want to break the connection. # Default is 60 seconds, minimum is 5, maximum is 1000. tcp-query-timeout= # Sets the format of the command used to open a UNIX remote # shell connection. The default is "%s %s -l %s exec /etc/r%sd" # NOTE: the 4 (four) "%s" entries MUST exist in the provided command # where the first is for the command's path, the second is for the # host to connect to, the third is for the user to connect as, and the # fourth is for the connection method (typically "imap") rsh-command= # Sets the name of the command used to open a UNIX remote shell connection. # The default is typically /usr/ucb/rsh. rsh-path= # Sets the time in seconds that Pine will attempt to open a UNIX remote # shell connection. The default is 15, min is 5, and max is unlimited. # Zero disables rsh altogether. rsh-open-timeout= # Sets the format of the command used to open a UNIX secure # shell connection. The default is "%s %s -l %s exec /etc/r%sd" # NOTE: the 4 (four) "%s" entries MUST exist in the provided command # where the first is for the command's path, the second is for the # host to connect to, the third is for the user to connect as, and the # fourth is for the connection method (typically "imap") ssh-command= # Sets the name of the command used to open a UNIX secure shell connection. # Typically this is /usr/bin/ssh. ssh-path= # Sets the time in seconds that Pine will attempt to open a UNIX secure # shell connection. The default is 15, min is 5, and max is unlimited. # Zero disables ssh altogether. ssh-open-timeout=0 # Sets the version number Pine will use as a threshold for offering # its new version message on startup. new-version-threshold= # List of mail drivers to disable. disable-these-drivers= # List of SASL authenticators to disable. disable-these-authenticators= # Set by Pine; contains data for caching remote address books. remote-abook-metafile=.ab50848 # How many extra copies of remote address book should be kept. Default: 3 remote-abook-history= # Minimum number of minutes between checks for remote address book changes. # 0 means never check except when opening a remote address book. # -1 means never check. Default: 5 remote-abook-validity= # Your default printer selection printer= # List of special print commands personal-print-command= # Which category default print command is in personal-print-category= # Patterns and their actions are stored here. patterns-roles= # Patterns and their actions are stored here. patterns-filters2=LIT:pattern="/NICK=Freebsd lists/RECIP=@freebsd.org/FLDTYPE=SPEC/FOLDER=INBOX/STATN=YES" action="/FILTER=1/FOLDER=freebsd/NOKILL=1" # Patterns and their actions are stored here. patterns-scores2= # Patterns and their actions are stored here. patterns-indexcolors=LIT:pattern="/NICK=important/FLDTYPE=EMAIL/STATI=YES" action="/ISINCOL=1/INCOL=\/FG=color011\/BG=black", LIT:pattern="/NICK=new/FLDTYPE=EMAIL/STATN=YES" action="/ISINCOL=1/INCOL=\/FG=color012\/BG=black", LIT:pattern="/NICK=replied/FLDTYPE=EMAIL/STATA=YES" action="/ISINCOL=1/INCOL=\/FG=color010\/BG=black", LIT:pattern="/NICK=deleted/FLDTYPE=EMAIL/STATD=YES" action="/ISINCOL=1/INCOL=\/FG=color009\/BG=black" # Patterns and their actions are stored here. patterns-other= # Controls display of color color-style=use-termdef # Controls display of color for current index line current-indexline-style= # Controls display of color for the titlebar at top of screen titlebar-color-style= # Choose: black, blue, green, cyan, red, magenta, yellow, or white. normal-foreground-color=color015 normal-background-color=black reverse-foreground-color= reverse-background-color= title-foreground-color= title-background-color= status-foreground-color= status-background-color= keylabel-foreground-color= keylabel-background-color= keyname-foreground-color= keyname-background-color= selectable-item-foreground-color= selectable-item-background-color= quote1-foreground-color= quote1-background-color= quote2-foreground-color= quote2-background-color= quote3-foreground-color= quote3-background-color= signature-foreground-color= signature-background-color= prompt-foreground-color= prompt-background-color= index-to-me-foreground-color= index-to-me-background-color= index-important-foreground-color=color011 index-important-background-color=black index-deleted-foreground-color=color009 index-deleted-background-color=black index-answered-foreground-color=color010 index-answered-background-color=black index-new-foreground-color=color012 index-new-background-color=black index-recent-foreground-color= index-recent-background-color= index-unseen-foreground-color= index-unseen-background-color= index-arrow-foreground-color= index-arrow-background-color= # When viewing messages, these are the header colors viewer-hdr-colors= # Colors used to display keywords in the index keyword-colors= # Reflects capabilities of the display you have. # If unset, the default is taken from your locale. That is usually the right # thing to use. Typical alternatives include UTF-8, ISO-8859-x, and EUC-JP # (where x is a number between 1 and 9). display-character-set= # Reflects capabilities of the keyboard you have. # If unset, the default is to use the same value # used for the display-character-set. keyboard-character-set= # Defaults to UTF-8. This is used for outgoing messages. # It is usually correct to leave this unset. posting-character-set= # When these characters appear in the middle of a word in the composer # the forward word function will stop at the first text following (as happens # with SPACE characters by default) composer-word-separators= # Characters between subject and opening text in SUBJECTTEXT token. # Default is " - " opening-text-separator-chars= # Number of times per-second to update busy cue messages busy-cue-rate= # Sets the time in seconds that Alpine will attempt to open a network # connection when checking for new unseen messages in an incoming folder. # The default is 5. incoming-check-timeout= # Sets the approximate number of seconds between checks for unseen messages # in incoming folders. The default is 180. incoming-check-interval= # Sets the approximate number of seconds between checks for unseen messages # for other than local or IMAP folders. The default is 180. incoming-check-interval-secondary= # List of incoming folders to check for unseen messages. The default if left # blank is to check all incoming folders. incoming-check-list= # Patterns and their actions are stored here. patterns-search= title-closed-foreground-color= title-closed-background-color= meta-message-foreground-color= meta-message-background-color= incoming-unseen-foreground-color= incoming-unseen-background-color= header-general-foreground-color= header-general-background-color= index-forward-foreground-color= index-forward-background-color= index-highpriority-foreground-color= index-highpriority-background-color= index-lowpriority-foreground-color= index-lowpriority-background-color= index-subject-foreground-color= index-subject-background-color= index-from-foreground-color= index-from-background-color= index-opening-foreground-color= index-opening-background-color= # LDAP servers for looking up addresses. # WebAlpine index table row height wp-indexheight= # WebAlpine number of index lines in table wp-indexlines= # WebAlpine aggregate operations tab state wp-aggstate= # WebAlpine various aspects of cross-session state wp-state= # WebAlpine preferred width for message display in characters wp-columns= # If set, specifies where trash is moved to in Web Alpine. trash-folder= # Defaults to nothing, which is equivalent to US-ASCII. This is used for # unlabeled incoming messages. It is ok to leave this unset but if you receive # unlabeled mail that is usually in some known character set, set that here. unknown-character-set= # Location relative to your HOME directory of the directory where your INBOX # for the maildir format is located. Default value is "Maildir". If your # inbox is located at "~/Maildir" you do not need to change this value. # A common value is also ".maildir" maildir-location= # Public certificates are kept in files in this directory. The files should # contain certificates in PEM format. The name of each file should look # like .crt. The default directory is .alpine-smime/public. smime-public-cert-directory= # If this option is set then public certificates are kept in a single container # "file" similar to a remote configuration file instead of in the # smime-publiccert-directory. The value can be a remote or local folder # specification like for a non-standard pinerc value. The default # is that it is not set. smime-public-cert-container= # Private keys are kept in files in this directory. The files are in PEM format. # The name of a file should look like .key. # The default directory is .alpine-smime/private. smime-private-key-directory= # If this option is set then private keys are kept in a single container # "file" similar to a remote configuration file instead of in the # private-key-directory. The value can be a remote or local folder # specification like for a non-standard pinerc value. The default # is that it is not set. smime-private-key-container= # Certificate Authority certificates (in addition to the normal CACerts for the # system) are kept in files in this directory. The files are in PEM format. # Filenames should end with .crt. The default directory is .alpine-smime/ca. smime-cacert-directory= # If this option is set then CAcerts are kept in a single container # "file" similar to a remote configuration file instead of in the # ca-cert-directory. The value can be a remote or local folder # specification like for a non-standard pinerc value. The default # is that it is not set. smime-cacert-container= # LDAP servers for looking up addresses. ldap-servers= # RSS News feed rss-news= # RSS Weather feed rss-weather= # Your login/e-mail user name user-id=bnewbold