blob: 1ca6057e5e546d7d2d8351434ef63574400be656 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
|
# Board-specific configuration values. Flash and SRAM sizes in bytes.
ifeq ($(BOARD), maple)
MCU := STM32F103RB
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOA
ERROR_LED_PIN := 5
DENSITY := STM32_MEDIUM_DENSITY
endif
ifeq ($(BOARD), maple_native)
MCU := STM32F103ZE
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOC
ERROR_LED_PIN := 15
DENSITY := STM32_HIGH_DENSITY
endif
ifeq ($(BOARD), maple_mini)
MCU := STM32F103CB
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOB
ERROR_LED_PIN := 1
DENSITY := STM32_MEDIUM_DENSITY
endif
ifeq ($(BOARD), maple_RET6)
MCU := STM32F103RE
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOA
ERROR_LED_PIN := 5
DENSITY := STM32_HIGH_DENSITY
endif
ifeq ($(BOARD), olimex_stm32_h103)
MCU := STM32F103RB
PRODUCT_ID := 0003
ERROR_LED_PORT := GPIOC
ERROR_LED_PIN := 12
DENSITY := STM32_MEDIUM_DENSITY
endif
# STM32 family-specific configuration values.
# NB: these only work for STM32F1 performance line chips, but those
# are the only ones we support at this time. If you add support for
# STM32F1 connectivity line MCUs or other STM32 families, this section
# will need to change.
LD_FAMILY_PATH := $(LDDIR)/stm32/family/f1/performance
LIBMAPLE_MODULE_FAMILY := $(LIBMAPLE_PATH)/stm32f1
# Memory target-specific configuration values
ifeq ($(MEMORY_TARGET), ram)
LDSCRIPT := $(BOARD)/ram.ld
VECT_BASE_ADDR := VECT_TAB_RAM
endif
ifeq ($(MEMORY_TARGET), flash)
LDSCRIPT := $(BOARD)/flash.ld
VECT_BASE_ADDR := VECT_TAB_FLASH
endif
ifeq ($(MEMORY_TARGET), jtag)
LDSCRIPT := $(BOARD)/jtag.ld
VECT_BASE_ADDR := VECT_TAB_BASE
endif
|
