blob: 5494b061b5757f1a750f6d04671c9a7e1a9d4cbf (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
.. highlight:: cpp
.. _usb:
=====
USB
=====
The Maple STM32 microprocessor includes a dedicated USB peripheral
which can be configured to act as a general USB slave device with
transfer rates up to 12Mbps (it unfortunately can't be configured as a
host or on-the-go device). By default, the peripheral is configured
for two uses: first, to receive sketch/program uploads from the IDE,
and second, to emulate a regular serial port for use as a terminal
(text read/write).
The emulated terminal is relatively slow and inefficient; it is best
for transferring data at regular serial speeds (kilobaud). Library
support for accessing the emulated terminal is available at the
:ref:`SerialUSB <lang-serialusb>` reference.
The SerialUSB channel is used as part of the auto-reset feature of the
IDE to program the board on Maple Rev 3 and Rev 5: a :ref:`magic
sequence of control line toggles and transmitted data
<bootloader-rev3>` causes the Maple to reset itself and enter
bootloader mode. As an unfortunate consequence, the auto-reset will
not work if the IDE can not access the serial port, either due to a
conflict with another program (serial monitor) or because the
interface has been disabled from the Maple side (through
:ref:`SerialUSB.end() <lang-serialusb-end>`). A solution to the
second problem is the use of :ref:`perpetual bootloader mode
<troubleshooting-perpetual-bootloader>`.
Recommended Reading
-------------------
* `USB in a NutShell <http://www.beyondlogic.org/usbnutshell/usb1.htm>`_ overview from Beyond Logic
* `Wikipedia article on Universal Serial Bus (USB) <http://en.wikipedia.org/wiki/Universal_Serial_Bus>`_
* Linux Kernel documentation for `USB ACM <http://www.kernel.org/doc/Documentation/usb/acm.txt>`_ and `USB Serial <http://www.kernel.org/doc/Documentation/usb/usb-serial.txt>`_
* STMicro documentation for STM32F103RB microcontroller:
* `All documents <http://www.st.com/mcu/devicedocs-STM32F103RB-110.html>`_
* `Datasheet <http://www.st.com/stonline/products/literature/ds/13587.pdf>`_ (pdf)
* `Reference Manual <http://www.st.com/stonline/products/literature/rm/13902.pdf>`_ (pdf)
* `Programming Manual <http://www.st.com/stonline/products/literature/pm/15491.pdf>`_ (pdf; assembly
language and register reference)
|
