1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
.. highlight:: cpp
.. _compatibility:
=============================
Maple-Arduino Compatibility
=============================
.. contents:: Contents
:local:
Overview
--------
The biggest difference between the Maple and most Arduino boards is
that the Maple uses a 32-bit ARM Cortex-M3 architecture chip while the
Arduinos have 8-bit Atmel AVR chips. The different instruction set
means that machine code (executable binary programs) is incompatible
between the two, and a different compiler (actually just a different
version of `gcc <http://gcc.gnu.org/>`_) is required. The compiler for
the regular Arduino IDE is the popular :command:`avr-gcc` package; the
compiler for the Maple version of the IDE is CodeSourcery's edition of
gcc for the ARM EABI target (:command:`arm-non-eabi-gcc`).
The bitwidth of the processor means that the Maple can process 32-bit
operations (like adding two 32-bit integers) in a single instruction,
while an Arduino processor would have to split up large operations
into several smaller ones. In a lot of cases 8-bit operations are
plenty (integers 0-255, single characters of text, etc.), but if
you're dealing with higher resolution data, the speed up could be
significant. A trade-off is that code could be larger as well; program
instructions and memory locations can be up to 32-bits each, which in
the worst case would quadruple program size. In reality, the removal
of extra instructions and fancy packing together of simple
instructions means that programs aren't much larger (or are even
smaller).
Header Numbering and Incompatibilities
--------------------------------------
The numbering of headers is different; on the Maple each GPIO has a
unique number: D0, D1, D2, all the way up to D37 (actually, there are
:ref:`a few more <jtag>`...). On the Arduino, the analog pins are
numbered separately (A0-A5) from the digital pins (D0\ -D13).
The incompatible hardware differences are:
* |i2c| port: on most Arduinos, the |i2c| port is Analog Input
4 (SDA) and Analog Input 5 (SCL); on the Maple, |i2c| port 1 is D5
(SCL) and D9 (SDA), and |i2c| port 2 is D29 (SCL) and D30 (SDA).
It should be possible to skywire, sacrificing signal quality (due to
increased capacitance). Alternatively, |i2c| can be bit-banged
reasonably well in software. This peripheral could potentially be
rerouted internally, but we haven't looked into it.
* :ref:`PWM <pwm>` on D10: all the other standard Arduino PWM headers have PWM
functionality on the Maple (D2,D3,D6,D9,D11), but not D10. We did
our best! It may be possible to reroute this peripheral internally
using low level configuration, but we haven't looked in to it.
* No External Voltage Reference: The Arduino has an Aref pin which
allows the use of an external ADC voltage reference; the Maple has
an extra GPIO pin (14) with PWM capability in this spot, and does
not allow an external voltage reference to be configured.
* EEPROM: the Maple does not have any internal EEPROM. This
functionality can be emulated with regular persistent flash memory,
or with an external EEPROM chip.
* ISP Programming: the Maple does not use an ISP/ICSP bus for
debugging; it uses :ref:`JTAG <jtag>`.
Software Language/Library Changes
---------------------------------
With :ref:`a few exceptions <language-missing-features>`, the entire
Arduino language is supported. However, there are some subtle
differences, most of which are improvements:
* 32-bit integers: many standard functions either expect or return
full 32-bit (4 byte) integer values instead of the regular 16-bit (2
byte) Arduino values.
* `pinMode()`_ types: any :ref:`GPIO <gpio>` (including analog pins)
can be configured into one of the following modes with a single call
to `pinMode()`_: ``OUTPUT``, ``OUTPUT_OPEN_DRAIN``,
``INPUT_FLOATING``, ``INPUT_PULLUP``,
``INPUT_PULLDOWN``. Additionally, the PWM and Analog Input pins can
be configured as ``INPUT_ANALOG`` and ``PWM`` respectively. See the
:ref:`GPIO documentation <gpio>` for more information.
.. TODO: reference libmaple docs above when they're done
* Serial1 syntax: like the `Arduino Mega
<http://arduino.cc/en/Main/ArduinoBoardMega>`_, the Maple has
multiple USART ports. By default, Serial is not mapped to any of
them, use ``Serial1`` through ``Serial3`` instead.
.. TODO: reference libmaple docs for Serial[n] above when they're done
* 16-bit :ref:`PWM <pwm>`: Arduino boards support 8-bit PWM, which
means that calls to `analogWrite()`_ take values between 0 (always
off) and 255 (always on). The Maple supports 16-bit PWM, so the
corresponding values should be between 0 (always off) and 65535
(always on).
* 12-bit :ref:`ADC <adc>`: Arduino boards support 10-bit ADC, which
means that calls to `analogRead()`_ will return values between 0 and
1023. The Maple supports 12-bit ADC, so the same call will instead
return values between 0 and 4095.
.. class:: ported-feature
I am supported!
This should be ordinary
.. class:: non-ported-feature
I can't do it :(
Also ordinary
.. class:: partly-ported-feature
I sorta work
And I am also ordinary
Stub (unfinished)
|
