path: root/libmaple/i2c.c

/******************************************************************************
 * The MIT License
 *
 * Copyright (c) 2010 Perry Hung.
 * Copyright (c) 2012 LeafLabs, LLC.
 *
 * Permission is hereby granted, free of charge, to any person
 * obtaining a copy of this software and associated documentation
 * files (the "Software"), to deal in the Software without
 * restriction, including without limitation the rights to use, copy,
 * modify, merge, publish, distribute, sublicense, and/or sell copies
 * of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *****************************************************************************/

/**
 * @file libmaple/i2c.c
 * @author Perry Hung <perry@leaflabs.com>
 * @author Barry Carter <barry.carter@gmail.com>
 * @brief Inter-Integrated Circuit (I2C) support.
 *
 * Master and Slave supported
 * Slave code added Barry Carter 2012
 */

#include "i2c_private.h"

#include <libmaple/libmaple.h>
#include <libmaple/rcc.h>
#include <libmaple/gpio.h>
#include <libmaple/nvic.h>
#include <libmaple/i2c.h>
#include <libmaple/systick.h>

#include <string.h>

static inline int32 wait_for_state_change(i2c_dev *dev,
                                          i2c_state state,
                                          uint32 timeout);
static void set_ccr_trise(i2c_dev *dev, uint32 flags);

/**
 * @brief Fill data register with slave address
 * @param dev I2C device
 * @param addr Slave address
 * @param rw Read/write bit
 */
static inline void i2c_send_slave_addr(i2c_dev *dev, uint32 addr, uint32 rw) {
    dev->regs->DR = (addr << 1) | rw;
}

/*
 * Simple debugging trail. Define I2C_DEBUG to turn on.
 */
#ifdef I2C_DEBUG

#define NR_CRUMBS       128
static struct crumb crumbs[NR_CRUMBS];
static uint32 cur_crumb = 0;

static inline void i2c_drop_crumb(uint32 event, uint32 arg0, uint32 arg1) {
    if (cur_crumb < NR_CRUMBS) {
        struct crumb *crumb = &crumbs[cur_crumb++];
        crumb->event = event;
        crumb->arg0 = arg0;
        crumb->arg1 = arg1;
    }
}
#define I2C_CRUMB(event, arg0, arg1) i2c_drop_crumb(event, arg0, arg1)

#else
#define I2C_CRUMB(event, arg0, arg1)
#endif

struct crumb {
    uint32 event;
    uint32 arg0;
    uint32 arg1;
};

enum {
    IRQ_ENTRY           = 1,
    TXE_ONLY            = 2,
    TXE_BTF             = 3,
    STOP_SENT           = 4,
    TEST                = 5,
    RX_ADDR_START       = 6,
    RX_ADDR_STOP        = 7,
    RXNE_ONLY           = 8,
    RXNE_SENDING        = 9,
    RXNE_START_SENT     = 10,
    RXNE_STOP_SENT      = 11,
    RXNE_DONE           = 12,
    ERROR_ENTRY         = 13,
};

/**
 * @brief Reset an I2C bus.
 *
 * Reset is accomplished by clocking out pulses until any hung slaves
 * release SDA and SCL, then generating a START condition, then a STOP
 * condition.
 *
 * @param dev I2C device
 */
void i2c_bus_reset(const i2c_dev *dev) {
    /* Release both lines */
    i2c_master_release_bus(dev);

    /*
     * Make sure the bus is free by clocking it until any slaves release the
     * bus.
     */
    while (!gpio_read_bit(sda_port(dev), dev->sda_pin)) {
        /* Wait for any clock stretching to finish */
        while (!gpio_read_bit(scl_port(dev), dev->scl_pin))
            ;
        delay_us(10);

        /* Pull low */
        gpio_write_bit(scl_port(dev), dev->scl_pin, 0);
        delay_us(10);

        /* Release high again */
        gpio_write_bit(scl_port(dev), dev->scl_pin, 1);
        delay_us(10);
    }

    /* Generate start then stop condition */
    gpio_write_bit(sda_port(dev), dev->sda_pin, 0);
    delay_us(10);
    gpio_write_bit(scl_port(dev), dev->scl_pin, 0);
    delay_us(10);
    gpio_write_bit(scl_port(dev), dev->scl_pin, 1);
    delay_us(10);
    gpio_write_bit(sda_port(dev), dev->sda_pin, 1);
}

/**
 * @brief Initialize an I2C device and reset its registers to their
 *        default values.
 * @param dev Device to initialize.
 */
void i2c_init(i2c_dev *dev) {
    rcc_reset_dev(dev->clk_id);
    rcc_clk_enable(dev->clk_id);
    _i2c_irq_priority_fixup(dev);
}

/* Hack for deprecated bit of STM32F1 functionality */
#ifndef _I2C_HAVE_DEPRECATED_I2C_REMAP
#define _i2c_handle_remap(dev, flags) ((void)0)
#endif

/**
 * @brief Initialize an I2C device as bus master
 * @param dev Device to enable
 * @param flags Bitwise or of the following I2C options:
 *              I2C_FAST_MODE: 400 khz operation,
 *              I2C_DUTY_16_9: 16/9 Tlow/Thigh duty cycle (only applicable for
 *                             fast mode),
 *              I2C_BUS_RESET: Reset the bus and clock out any hung slaves on
 *                             initialization,
 *              I2C_10BIT_ADDRESSING: Enable 10-bit addressing,
 *              I2C_REMAP: (deprecated, STM32F1 only) Remap I2C1 to SCL/PB8
 *                         SDA/PB9.
 */
void i2c_master_enable(i2c_dev *dev, uint32 flags) {
    /* PE must be disabled to configure the device */
    ASSERT(!(dev->regs->CR1 & I2C_CR1_PE));

    /* Ugh */
    _i2c_handle_remap(dev, flags);

    /* Reset the bus. Clock out any hung slaves. */
    if (flags & I2C_BUS_RESET) {
        i2c_bus_reset(dev);
    }

    /* Turn on clock and set GPIO modes */
    i2c_init(dev);
    i2c_config_gpios(dev);

    /* Configure clock and rise time */
    set_ccr_trise(dev, flags);

    /* Enable event and buffer interrupts */
    nvic_irq_enable(dev->ev_nvic_line);
    nvic_irq_enable(dev->er_nvic_line);
    i2c_enable_irq(dev, I2C_IRQ_EVENT | I2C_IRQ_BUFFER | I2C_IRQ_ERROR);

    /* Configure the slave unit */
    if (flags & I2C_SLAVE_DUAL_ADDRESS) {
        i2c_slave_dual_address_enable(dev);
    }

    if (flags & I2C_SLAVE_GENERAL_CALL) {
        i2c_slave_general_call_enable(dev);
    }

    /* store all of the flags */
    dev->config_flags = flags;

    /* Make it go! */
    i2c_peripheral_enable(dev);
    i2c_enable_ack(dev);

    dev->state = I2C_STATE_IDLE;
}

/**
 * @brief Initialize an I2C device as slave (and master)
 * @param dev Device to enable
 * @param flags Bitwise or of the following I2C options:
 *              I2C_FAST_MODE: 400 khz operation,
 *              I2C_DUTY_16_9: 16/9 Tlow/Thigh duty cycle (only applicable for
 *                             fast mode),
 *              I2C_BUS_RESET: Reset the bus and clock out any hung slaves on
 *                             initialization,
 *              I2C_10BIT_ADDRESSING: Enable 10-bit addressing,
 *              I2C_REMAP: (deprecated, STM32F1 only) Remap I2C1 to SCL/PB8
 *                         SDA/PB9.
 *              I2C_SLAVE_DUAL_ADDRESS: Slave can respond on 2 i2C addresses
 *              I2C_SLAVE_GENERAL_CALL: SLA+W broadcast to all general call
 *                                      listeners on bus. Addr 0x00
 *              I2C_SLAVE_USE_RX_BUFFER: Use a buffer to receive the incoming
 *                                       data. Callback at end of recv
 *              I2C_SLAVE_USE_TX_BUFFER: Use a buffer to transmit data.
 *                                       Callback will be called before tx
 */
void i2c_slave_enable(i2c_dev *dev, uint32 flags) {
    i2c_disable(dev);
    i2c_master_enable(dev, dev->config_flags | flags);
}

/**
 * @brief Process an i2c transaction.
 *
 * Transactions are composed of one or more i2c_msg's, and may be read
 * or write tranfers.  Multiple i2c_msg's will generate a repeated
 * start in between messages.
 *
 * @param dev I2C device
 * @param msgs Messages to send/receive
 * @param num Number of messages to send/receive
 * @param timeout Bus idle timeout in milliseconds before aborting the
 *                transfer.  0 denotes no timeout.
 * @return 0 on success,
 *         I2C_ERROR_PROTOCOL if there was a protocol error,
 *         I2C_ERROR_TIMEOUT if the transfer timed out.
 */
int32 i2c_master_xfer(i2c_dev *dev,
                      i2c_msg *msgs,
                      uint16 num,
                      uint32 timeout) {
    int32 rc;

    ASSERT(dev->state == I2C_STATE_IDLE);

    dev->msg = msgs;
    dev->msgs_left = num;
    dev->timestamp = systick_uptime();
    dev->state = I2C_STATE_BUSY;

    i2c_enable_irq(dev, I2C_IRQ_EVENT);
    i2c_start_condition(dev);

    rc = wait_for_state_change(dev, I2C_STATE_XFER_DONE, timeout);
    if (rc < 0) {
        goto out;
    }

    dev->state = I2C_STATE_IDLE;
out:
    return rc;
}

/**
 * @brief Wait for an I2C event, or time out in case of error.
 * @param dev I2C device
 * @param state I2C_state state to wait for
 * @param timeout Timeout, in milliseconds
 * @return 0 if target state is reached, a negative value on error.
 */
static inline int32 wait_for_state_change(i2c_dev *dev,
                                          i2c_state state,
                                          uint32 timeout) {
    i2c_state tmp;

    while (1) {
        tmp = dev->state;

        if (tmp == I2C_STATE_ERROR) {
            return I2C_STATE_ERROR;
        }

        if (tmp == state) {
            return 0;
        }

        if (timeout) {
            if (systick_uptime() > (dev->timestamp + timeout)) {
                /* TODO: overflow? */
                /* TODO: racy? */
                return I2C_ERROR_TIMEOUT;
            }
        }
    }
}

/*
 * Private API
 */

/*
 * IRQ handler for I2C master. Handles transmission/reception.
 */
void _i2c_irq_handler(i2c_dev *dev) {
    /* WTFs:
     * - Where is I2C_MSG_10BIT_ADDR handled?
     */
    i2c_msg *msg = dev->msg;

    uint8 read = msg->flags & I2C_MSG_READ;

    uint32 sr1 = dev->regs->SR1;
    uint32 sr2 = dev->regs->SR2;
    I2C_CRUMB(IRQ_ENTRY, sr1, sr2);

    /*
     * Reset timeout counter
     */
    dev->timestamp = systick_uptime();

    /*
     * Add Slave support
     */

    /* Check to see if MSL master slave bit is set */
    if ((sr2 & I2C_SR2_MSL) != I2C_SR2_MSL) { /* 0 = slave mode 1 = master */

        /* Check for address match */
        if (sr1 & I2C_SR1_ADDR) {
            /* Find out which address was matched */
            /* Check the general call address first */
            if (sr2 & I2C_SR2_GENCALL) {
                dev->i2c_slave_msg->addr = 0;
            }
            /* We matched the secondary address */
            else if (sr2 & I2C_SR2_DUALF) {
                dev->i2c_slave_msg->addr = dev->regs->OAR2 & 0xFE;
            }
            /* We matched the primary address */
            else if ((sr2 & I2C_SR2_DUALF) != I2C_SR2_DUALF) {
                dev->i2c_slave_msg->addr = dev->regs->OAR1 & 0xFE;
            }
            /* Shouldn't get here */
            else {
                dev->i2c_slave_msg->addr = -1; /* uh oh */
            }

            /* if we have buffered io */
            if ((dev->config_flags & I2C_SLAVE_USE_RX_BUFFER) ||
                (dev->config_flags & I2C_SLAVE_USE_TX_BUFFER)) {

                /* if receiving then this would be a repeated start
                 *
                 *if we have some bytes already
                 */
                if ((dev->state == I2C_STATE_SL_RX) &&
                    (dev->i2c_slave_msg->xferred > 0)  &&
                    (dev->config_flags & I2C_SLAVE_USE_RX_BUFFER)) {
                    /* Call the callback with the contents of the data */
                    if (dev->i2c_slave_recv_callback != NULL) {
                        (*(dev->i2c_slave_recv_callback))(dev->i2c_slave_msg);
                    }
                }

                /* Reset the message back to defaults.
                 * We are starting a new message
                 */
                dev->i2c_slave_msg->flags = 0;
                dev->i2c_slave_msg->length = 0;
                dev->i2c_slave_msg->xferred = 0;
                dev->msgs_left = 0;
                dev->timestamp = systick_uptime();

                /* We have been addressed with SLA+R so
                 * the master wants us to transmit
                 */
                if ((sr1 & I2C_SR1_TXE) &&
                    (dev->config_flags & I2C_SLAVE_USE_TX_BUFFER)) {
                    /* Call the transmit callback so it can populate the msg
                     * data with the bytes to go
                     */
                    if (dev->i2c_slave_transmit_callback != NULL) {
                        (*(dev->i2c_slave_transmit_callback))(dev->i2c_slave_msg);
                    }
                }
                dev->state = I2C_STATE_BUSY;
            }

            sr1 = sr2 = 0;
        }
        
         /* EV3: Master requesting data from slave. Transmit a byte*/
        if (sr1 & I2C_SR1_TXE) {
            if (dev->config_flags & I2C_SLAVE_USE_TX_BUFFER) {
                if (dev->i2c_slave_msg->xferred >= dev->i2c_slave_msg->length) {
                    /* End of the transmit buffer? If so we NACK */
                    i2c_disable_ack(dev);
                    /* We have to either issue a STOP or write something here.
                     * STOP here seems to screw up some masters,
                     * For now padding with 0
                     */
                    i2c_write(dev, 0);
                    /*i2c_stop_condition(dev); // This is causing bus lockups way more than it should !? Seems some I2C master devices freak out here*/
                }
                else
                {
                    /* NACk the last byte */
                    if (dev->i2c_slave_msg->xferred == dev->i2c_slave_msg->length-1) {
                        i2c_disable_ack(dev);
                    }
                    else {
                        i2c_enable_ack(dev);
                    }
                    i2c_write(dev, dev->i2c_slave_msg->data[dev->i2c_slave_msg->xferred++]);
                }
            }
            else
            {
                /* Call the callback to get the data we need.
                 * The callback is expected to write using i2c_write(...)
                 * If the slave is going to terminate the transfer, this function should
                 * also do a NACK on the last byte!
                 */
                if (dev->i2c_slave_transmit_callback != NULL) (*(dev->i2c_slave_transmit_callback))(dev->i2c_slave_msg);
            }

            dev->state = I2C_STATE_BUSY;
            sr1 = sr2 = 0;
        }
        
        /* EV2: Slave received data from a master. Get from DR */
        if (sr1 & I2C_SR1_RXNE) {
            if (dev->config_flags & I2C_SLAVE_USE_RX_BUFFER) {
                /* Fill the buffer with the contents of the data register */
                dev->i2c_slave_msg->data[dev->i2c_slave_msg->xferred++] = dev->regs->DR;
                dev->i2c_slave_msg->length++;
            }
            else  {
                /* Call the callback with the contents of the data */
                dev->i2c_slave_msg->data[0] = dev->regs->DR;
                if (dev->i2c_slave_recv_callback != NULL) (*(dev->i2c_slave_recv_callback))(dev->i2c_slave_msg);
            }
            dev->state = I2C_STATE_SL_RX;
            sr1 = sr2 = 0;
        }

        /* EV4: Slave has detected a STOP condition on the bus */
        if (sr1 & I2C_SR1_STOPF) {
            dev->regs->CR1 |= I2C_CR1_PE;

            if ((dev->config_flags & I2C_SLAVE_USE_RX_BUFFER) ||
                (dev->config_flags & I2C_SLAVE_USE_TX_BUFFER)) {

                /* The callback with the data will happen on a NACK of the last data byte.
                 * This is handled in the error IRQ (AF bit)
                 */
                /* Handle the case where the master misbehaves by sending no NACK */
                if (dev->state != I2C_STATE_IDLE) {
                    if (dev->state == I2C_STATE_SL_RX) {
                        if (dev->i2c_slave_recv_callback != NULL) (*(dev->i2c_slave_recv_callback))(dev->i2c_slave_msg);
                    }
                    else {
                        if (dev->i2c_slave_transmit_callback != NULL) (*(dev->i2c_slave_transmit_callback))(dev->i2c_slave_msg);
                    }
                }
            }

            sr1 = sr2 = 0;
            dev->state = I2C_STATE_IDLE;
        }

        return;
    }
    
    /*
     * EV5: Start condition sent
     */
    if (sr1 & I2C_SR1_SB) {
        msg->xferred = 0;
        i2c_enable_irq(dev, I2C_IRQ_BUFFER);

        /*
         * Master receiver
         */
        if (read) {
            i2c_enable_ack(dev);
        }

        i2c_send_slave_addr(dev, msg->addr, read);
        sr1 = sr2 = 0;
    }

    /*
     * EV6: Slave address sent
     */
    if (sr1 & I2C_SR1_ADDR) {
        /*
         * Special case event EV6_1 for master receiver.
         * Generate NACK and restart/stop condition after ADDR
         * is cleared.
         */
        if (read) {
            if (msg->length == 1) {
                i2c_disable_ack(dev);
                if (dev->msgs_left > 1) {
                    i2c_start_condition(dev);
                    I2C_CRUMB(RX_ADDR_START, 0, 0);
                } else {
                    i2c_stop_condition(dev);
                    I2C_CRUMB(RX_ADDR_STOP, 0, 0);
                }
            }
        } else {
            /*
             * Master transmitter: write first byte to fill shift
             * register.  We should get another TXE interrupt
             * immediately to fill DR again.
             */
            if (msg->length != 1) {
                i2c_write(dev, msg->data[msg->xferred++]);
            }
        }
        sr1 = sr2 = 0;
    }

    /*
     * EV8: Master transmitter
     * Transmit buffer empty, but we haven't finished transmitting the last
     * byte written.
     */
    if ((sr1 & I2C_SR1_TXE) && !(sr1 & I2C_SR1_BTF)) {
        I2C_CRUMB(TXE_ONLY, 0, 0);
        if (dev->msgs_left) {
            i2c_write(dev, msg->data[msg->xferred++]);
            if (msg->xferred == msg->length) {
                /*
                 * End of this message. Turn off TXE/RXNE and wait for
                 * BTF to send repeated start or stop condition.
                 */
                i2c_disable_irq(dev, I2C_IRQ_BUFFER);
                dev->msgs_left--;
            }
        } else {
            /*
             * This should be impossible...
             */
            ASSERT(0);
        }
        sr1 = sr2 = 0;
    }

    /*
     * EV8_2: Master transmitter
     * Last byte sent, program repeated start/stop
     */
    if ((sr1 & I2C_SR1_TXE) && (sr1 & I2C_SR1_BTF)) {
        I2C_CRUMB(TXE_BTF, 0, 0);
        if (dev->msgs_left) {
            I2C_CRUMB(TEST, 0, 0);
            /*
             * Repeated start insanity: We can't disable ITEVTEN or else SB
             * won't interrupt, but if we don't disable ITEVTEN, BTF will
             * continually interrupt us. What the fuck ST?
             */
            i2c_start_condition(dev);
            while (!(dev->regs->SR1 & I2C_SR1_SB))
                ;
            dev->msg++;
        } else {
            i2c_stop_condition(dev);

            /*
             * Turn off event interrupts to keep BTF from firing until
             * the end of the stop condition. Why on earth they didn't
             * have a start/stop condition request clear BTF is beyond
             * me.
             */
            i2c_disable_irq(dev, I2C_IRQ_EVENT);
            I2C_CRUMB(STOP_SENT, 0, 0);
            dev->state = I2C_STATE_XFER_DONE;
        }
        sr1 = sr2 = 0;
    }

    /*
     * EV7: Master Receiver
     */
    if (sr1 & I2C_SR1_RXNE) {
        I2C_CRUMB(RXNE_ONLY, 0, 0);
        msg->data[msg->xferred++] = dev->regs->DR;

        /*
         * EV7_1: Second to last byte in the reception? Set NACK and generate
         * stop/restart condition in time for the last byte. We'll get one more
         * RXNE interrupt before shutting things down.
         */
        if (msg->xferred == (msg->length - 1)) {
            i2c_disable_ack(dev);
            if (dev->msgs_left > 2) {
                i2c_start_condition(dev);
                I2C_CRUMB(RXNE_START_SENT, 0, 0);
            } else {
                i2c_stop_condition(dev);
                I2C_CRUMB(RXNE_STOP_SENT, 0, 0);
            }
        } else if (msg->xferred == msg->length) {
            dev->msgs_left--;
            if (dev->msgs_left == 0) {
                /*
                 * We're done.
                 */
                I2C_CRUMB(RXNE_DONE, 0, 0);
                dev->state = I2C_STATE_XFER_DONE;
            } else {
                dev->msg++;
            }
        }
    }

}

/*
 * Interrupt handler for I2C error conditions. Aborts any pending I2C
 * transactions.
 */
void _i2c_irq_error_handler(i2c_dev *dev) {
    I2C_CRUMB(ERROR_ENTRY, dev->regs->SR1, dev->regs->SR2);

    dev->error_flags = dev->regs->SR1 & (I2C_SR1_BERR |
                                         I2C_SR1_ARLO |
                                         I2C_SR1_AF |
                                         I2C_SR1_OVR);

    /* Are we in slave mode? */
    if ((dev->regs->SR2 & I2C_SR2_MSL) != I2C_SR2_MSL) {
        /* Check to see if the master device did a NAK on the last bit
         * This is perfectly valid for a master to do this on the bus.
         * We ignore this. Any further error processing takes us into dead
         * loop waiting for the stop condition that will never arrive
         */
        if (dev->regs->SR1 & I2C_SR1_AF) {
            /* Clear flags */
            dev->regs->SR1 = 0;
            dev->regs->SR2 = 0;
            /* We need to write something to CR1 to clear the flag.
             * This isn't really mentioned but seems important */
            i2c_enable_ack(dev);

            if (dev->state == I2C_STATE_SL_RX &&
                dev->config_flags & I2C_SLAVE_USE_RX_BUFFER &&
                dev->i2c_slave_msg->xferred > 0) {
                /* Call the callback with the contents of the data */
                if (dev->i2c_slave_recv_callback != NULL) (*(dev->i2c_slave_recv_callback))(dev->i2c_slave_msg);
            }

            dev->state = I2C_STATE_IDLE;
            return;
        }
        /* Catch any other strange errors while in slave mode.
         * I have seen BERR caused by an over fast master device
         * as well as several overflows and arbitration failures.
         * We are going to reset SR flags and carry on at this point which
         * is not the best thing to do, but stops the bus locking up completely
         * If we carry on below and send the stop bit, the code spins forever */
        /* Clear flags */
        dev->regs->SR1 = 0;
        dev->regs->SR2 = 0;
        dev->state = I2C_STATE_IDLE;
        return;
    }

    /* Clear flags */
    dev->regs->SR1 = 0;
    dev->regs->SR2 = 0;

    i2c_stop_condition(dev);
    i2c_disable_irq(dev, I2C_IRQ_BUFFER | I2C_IRQ_EVENT | I2C_IRQ_ERROR);
    dev->state = I2C_STATE_ERROR;
}

/*
 * CCR/TRISE configuration helper
 */
static void set_ccr_trise(i2c_dev *dev, uint32 flags) {
    uint32 ccr     = 0;
    uint32 trise   = 0;
    uint32 clk_mhz = _i2c_bus_clk(dev);
    uint32 clk_hz  = clk_mhz * (1000 * 1000);

    i2c_set_input_clk(dev, clk_mhz);

    if (flags & I2C_FAST_MODE) {
        ccr |= I2C_CCR_FS;

        if (flags & I2C_DUTY_16_9) {
            /* Tlow/Thigh = 16/9 */
            ccr |= I2C_CCR_DUTY_16_9;
            ccr |= clk_hz / (400000 * 25);
        } else {
            /* Tlow/Thigh = 2 */
            ccr |= clk_hz / (400000 * 3);
        }

        trise = (300 * clk_mhz / 1000) + 1;
    } else {
        /* Tlow/Thigh = 1 */
        ccr = clk_hz / (100000 * 2);
        trise = clk_mhz + 1;
    }

    /* Set minimum required value if CCR < 1*/
    if ((ccr & I2C_CCR_CCR) == 0) {
        ccr |= 0x1;
    }

    i2c_set_clk_control(dev, ccr);
    i2c_set_trise(dev, trise);
}


/**
 * @brief callback for when the device acts as a slave. If using an rx buffer, this is triggered
 * after the last byte, otherwise it is called for every incoming packet.
 * @param dev I2C device
 * @param msg The dev_msg to pass to the slave init code
 * @param func The function pointer to call
 */
void i2c_slave_attach_recv_handler(i2c_dev *dev, i2c_msg *msg, i2c_slave_recv_callback_func func) {
    dev->i2c_slave_recv_callback = func;
    dev->i2c_slave_msg = msg;
    msg->xferred = 0;
}


/**
 * @brief callback for when the device acts as a slave. If using a tx buffer, this is triggered
 * after the device is successsfully addressed with SLA+R.
 * @param dev I2C device
 * @param msg The dev_msg to pass to the slave init code
 * @param func The function pointer to call
 */
void i2c_slave_attach_transmit_handler(i2c_dev *dev, i2c_msg *msg, i2c_slave_transmit_callback_func func) {
    dev->i2c_slave_transmit_callback = func;
    dev->i2c_slave_msg = msg;
    msg->xferred = 0;
}