1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
|
/******************************************************************************
* The MIT License
*
* Copyright (c) 2010 Perry Hung.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*****************************************************************************/
/**
* @brief Analog to digital converter routines
*/
#include "libmaple.h"
#include "rcc.h"
#include "adc.h"
/* The ADC input clock is generated from PCLK2/APB2 divided by a prescaler
* and it must not exceed 14MHz.
*
* ADC1 and ADC2 are clocked by APB2
*
* 1) Power on by setting ADON in ADC_CR2
* Conversion starts when ADON is set for a second time after some
* time t > t_stab.
*
* Up to 16 selected conversion must be selected in ADC_SQRx
*
* Single conversion mode:
* Set the ADON bit in the ADC_CR2 register
* Once the conversion is complete:
* Converted data is stored in ADC_DR
* EOC flag is set
* Interrupt is generated if EOCIE is set
*
* Calibration:
* Calibration is started by setting the CAL bit in the ADC_CR2 register.
* Once calibration is over, the CAL bit is reset by hardware and normal
* conversion can be performed. Calibrate at power-on.
*
* ALIGN in ADC_CR2 selects the alignment of data
*
* IMPORTANT: maximum external impedance must be below 0.4kOhms for 1.5
* sample conversion time.
*
* At 55.5 cycles/sample, the external input impedance < 50kOhms*/
void adc_init(void) {
rcc_set_prescaler(RCC_PRESCALER_ADC, RCC_ADCPRE_PCLK_DIV_6);
rcc_clk_enable(RCC_ADC1);
rcc_reset_dev(RCC_ADC1);
ADC_CR1 = 0;
/* Software triggers conversions */
ADC_CR2 = CR2_EXTSEL_SWSTART | CR2_EXTTRIG;
ADC_SQR1 = 0;
/* Up the sample conversion time to 55.5 cycles/sec, see note
above */
/* TODO: fix magic numbers */
ADC_SMPR1 = 0xB6DB6D;
ADC_SMPR2 = 0x2DB6DB6D;
/* Enable the ADC */
CR2_ADON_BIT = 1;
/* Reset the calibration registers and then perform a reset */
CR2_RSTCAL_BIT = 1;
while(CR2_RSTCAL_BIT)
;
CR2_CAL_BIT = 1;
while(CR2_CAL_BIT)
;
}
void adc_disable(void) {
CR2_ADON_BIT = 0;
}
|
