/******************************************************************************
 * The MIT License
 *
 * Copyright (c) 2010 Perry Hung.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *****************************************************************************/

/**
 * @file HardwareSerial.cpp
 * @brief Wirish serial port implementation.
 */

#include "gpio.h"
#include "timer.h"

#include "HardwareSerial.h"
#include "boards.h"

#define TX1 BOARD_USART1_TX_PIN
#define RX1 BOARD_USART1_RX_PIN
#define TX2 BOARD_USART2_TX_PIN
#define RX2 BOARD_USART2_RX_PIN
#define TX3 BOARD_USART3_TX_PIN
#define RX3 BOARD_USART3_RX_PIN
#if defined STM32_HIGH_DENSITY && !defined(BOARD_maple_RET6)
#define TX4 BOARD_UART4_TX_PIN
#define RX4 BOARD_UART4_RX_PIN
#define TX5 BOARD_UART5_TX_PIN
#define RX5 BOARD_UART5_RX_PIN
#endif

HardwareSerial Serial1(USART1, TX1, RX1);
HardwareSerial Serial2(USART2, TX2, RX2);
HardwareSerial Serial3(USART3, TX3, RX3);
#if defined(STM32_HIGH_DENSITY) && !defined(BOARD_maple_RET6)
HardwareSerial Serial4(UART4,  TX4, RX4);
HardwareSerial Serial5(UART5,  TX5, RX5);
#endif

HardwareSerial::HardwareSerial(usart_dev *usart_device,
                               uint8 tx_pin,
                               uint8 rx_pin) {
    this->usart_device = usart_device;
    this->tx_pin = tx_pin;
    this->rx_pin = rx_pin;
}

uint8 HardwareSerial::read(void) {
    return usart_getc(usart_device);
}

uint32 HardwareSerial::available(void) {
    return usart_data_available(usart_device);
}

void HardwareSerial::write(unsigned char ch) {
    usart_putc(usart_device, ch);
}

void HardwareSerial::begin(uint32 baud) {
    ASSERT(baud <= usart_device->max_baud);

    if (baud > usart_device->max_baud) {
        return;
    }

    const stm32_pin_info *txi = &PIN_MAP[tx_pin];
    const stm32_pin_info *rxi = &PIN_MAP[rx_pin];

    gpio_set_mode(txi->gpio_device, txi->gpio_bit, GPIO_AF_OUTPUT_PP);
    gpio_set_mode(rxi->gpio_device, rxi->gpio_bit, GPIO_INPUT_FLOATING);

    if (txi->timer_device != NULL) {
        /* Turn off any PWM if there's a conflict on this GPIO bit. */
        timer_set_mode(txi->timer_device, txi->timer_channel, TIMER_DISABLED);
    }

    usart_init(usart_device);
    usart_set_baud_rate(usart_device,
                        CYCLES_PER_MICROSECOND * 1000000UL,
                        baud);
    usart_enable(usart_device);
}

void HardwareSerial::end(void) {
    usart_disable(usart_device);
}

void HardwareSerial::flush(void) {
    usart_reset_rx(usart_device);
}