/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : main.c
* Author             : MCD Application Team
* Version            : V2.0.1
* Date               : 06/13/2008
* Description        : Main program body
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_lib.h"
#include "platform_config.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
NVIC_InitTypeDef NVIC_InitStructure;
ErrorStatus HSEStartUpStatus;
  
/* Private function prototypes -----------------------------------------------*/
void RCC_Configuration(void);
void GPIO_Configuration(void);
void TIM_Configuration(void);

/* Private functions ---------------------------------------------------------*/

/*******************************************************************************
* Function Name  : main
* Description    : Main program.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
int main(void)
{
#ifdef DEBUG
  debug();
#endif
  
  /* Configure the system clocks */
  RCC_Configuration();

  /* Configure GPIOs */
  GPIO_Configuration();

  /* Configure TIMs */
  TIM_Configuration();
       
#ifdef  VECT_TAB_RAM  
  /* Set the Vector Table base location at 0x20000000 */ 
  NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); 
#else  /* VECT_TAB_FLASH  */
  /* Set the Vector Table base location at 0x08000000 */ 
  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);   
#endif

  /* Configure one bit for preemption priority */
  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
  
  /* Enable the TIM2 Interrupt */
  NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQChannel;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);
  
  /* Enable the TIM3 Interrupt */
  NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQChannel;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
  NVIC_Init(&NVIC_InitStructure);
 
  /* Enable the TIM4 Interrupt */
  NVIC_InitStructure.NVIC_IRQChannel = TIM4_IRQChannel;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
  NVIC_Init(&NVIC_InitStructure); 
    
  while (1)
  {     
  }
}

/*******************************************************************************
* Function Name  : RCC_Configuration
* Description    : Configures the different system clocks
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_Configuration(void)
{
  /* RCC system reset(for debug purpose) */
  RCC_DeInit();

  /* Enable HSE */
  RCC_HSEConfig(RCC_HSE_ON);

  /* Wait till HSE is ready */
  HSEStartUpStatus = RCC_WaitForHSEStartUp();

  if(HSEStartUpStatus == SUCCESS)
  {
    /* Enable Prefetch Buffer */
    FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);

    /* Flash 2 wait state */
    FLASH_SetLatency(FLASH_Latency_2);
 
    /* HCLK = SYSCLK */
    RCC_HCLKConfig(RCC_SYSCLK_Div1); 
  
    /* PCLK2 = HCLK */
    RCC_PCLK2Config(RCC_HCLK_Div1); 

    /* PCLK1 = HCLK/2 */
    RCC_PCLK1Config(RCC_HCLK_Div2);

    /* PLLCLK = 8MHz * 9 = 72 MHz */
    RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);

    /* Enable PLL */ 
    RCC_PLLCmd(ENABLE);

    /* Wait till PLL is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
    {
    }

    /* Select PLL as system clock source */
    RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);

    /* Wait till PLL is used as system clock source */
    while(RCC_GetSYSCLKSource() != 0x08)
    {
    }
  }
    
  /* Enable GPIO_LED clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_LED, ENABLE);

  /* Enable TIM2, TIM3 and TIM4 clocks */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3 |
                         RCC_APB1Periph_TIM4, ENABLE);
}

/*******************************************************************************
* Function Name  : GPIO_Configuration
* Description    : Configures the used GPIO pins.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void GPIO_Configuration(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;

  /* Configure GPIO_LED pin 6, GPIO_LED pin 7, GPIO_LED pin 8 as output push-pull */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIO_LED, &GPIO_InitStructure);
}

/*******************************************************************************
* Function Name  : TIM_Configuration
* Description    : Configures the used Timers.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void TIM_Configuration(void)
{ 
  TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
  TIM_OCInitTypeDef  TIM_OCInitStructure;

  /* TIM2 configuration */
  TIM_TimeBaseStructure.TIM_Period = 0x4AF;          
  TIM_TimeBaseStructure.TIM_Prescaler = 0xEA5F;       
  TIM_TimeBaseStructure.TIM_ClockDivision = 0x0;    
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  
  TIM_TimeBaseStructure.TIM_RepetitionCounter = 0x0000;
  TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
  
  TIM_OCStructInit(&TIM_OCInitStructure);
  /* Output Compare Timing Mode configuration: Channel1 */
  TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_Timing;                   
  TIM_OCInitStructure.TIM_Pulse = 0x0;  
  TIM_OC1Init(TIM2, &TIM_OCInitStructure);
  
  /* TIM3 configuration */
  TIM_TimeBaseStructure.TIM_Period = 0x95F;
          
  TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
  /* Output Compare Timing Mode configuration: Channel1 */
  TIM_OC1Init(TIM3, &TIM_OCInitStructure);
  
  /* TIM4 configuration */
  TIM_TimeBaseStructure.TIM_Period = 0xE0F;  
        
  TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure);
  /* Output Compare Timing Mode configuration: Channel1 */
  TIM_OC1Init(TIM4, &TIM_OCInitStructure);

  /* TIM2 enable counter */
  TIM_Cmd(TIM2, ENABLE);
  /* TIM3 enable counter */
  TIM_Cmd(TIM3, ENABLE);
  /* TIM4 enable counter */
  TIM_Cmd(TIM4, ENABLE);

  /* Immediate load of TIM2 Precaler value */
  TIM_PrescalerConfig(TIM2, 0xEA5F, TIM_PSCReloadMode_Immediate);
  /* Immediate load of TIM3 Precaler value */  
  TIM_PrescalerConfig(TIM3, 0xEA5F, TIM_PSCReloadMode_Immediate);
  /* Immediate load of TIM4 Precaler value */
  TIM_PrescalerConfig(TIM4, 0xEA5F, TIM_PSCReloadMode_Immediate);

  /* Clear TIM2 update pending flag */
  TIM_ClearFlag(TIM2, TIM_FLAG_Update);
  /* Clear TIM3 update pending flag */
  TIM_ClearFlag(TIM3, TIM_FLAG_Update);
  /* Clear TIM4 update pending flag */
  TIM_ClearFlag(TIM4, TIM_FLAG_Update);

  /* Enable TIM2 Update interrupt */
  TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
  /* Enable TIM3 Update interrupt */
  TIM_ITConfig(TIM3, TIM_IT_Update, ENABLE);
  /* Enable TIM4 Update interrupt */
  TIM_ITConfig(TIM4, TIM_IT_Update, ENABLE);
}

#ifdef  DEBUG
/*******************************************************************************
* Function Name  : assert_failed
* Description    : Reports the name of the source file and the source line number
*                  where the assert_param error has occurred.
* Input          : - file: pointer to the source file name
*                  - line: assert_param error line source number
* Output         : None
* Return         : None
*******************************************************************************/
void assert_failed(u8* file, u32 line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}
#endif

/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/