/****************************************************************************** * The MIT License * * Copyright (c) 2011 LeafLabs LLC. * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, copy, * modify, merge, publish, distribute, sublicense, and/or sell copies * of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. *****************************************************************************/ /** * @file libmaple/usb/stm32f1/usb_cdcacm.c * @brief USB CDC ACM (a.k.a. virtual serial terminal, VCOM). * * FIXME: this works on the STM32F1 USB peripherals, and probably no * place else. Nonportable bits really need to be factored out, and * the result made cleaner. */ #include #include #include #include /* Private headers */ #include "usb_descriptors.h" #include "usb_lib_globals.h" #include "usb_reg_map.h" /* usb_lib headers */ #include "usb_type.h" #include "usb_core.h" #include "usb_def.h" /****************************************************************************** ****************************************************************************** *** *** HACK ALERT! FIXME FIXME FIXME FIXME! *** *** A bunch of LeafLabs-specific configuration lives in here for *** now. This mess REALLY needs to get teased apart, with *** appropriate pieces moved into Wirish. *** ****************************************************************************** *****************************************************************************/ #if !(defined(BOARD_maple) || defined(BOARD_maple_RET6) || \ defined(BOARD_maple_mini) || defined(BOARD_maple_native)) #warning USB CDC ACM relies on LeafLabs board-specific configuration.\ You may have problems on non-LeafLabs boards. #endif static void vcomDataTxCb(void); static void vcomDataRxCb(void); static uint8* vcomGetSetLineCoding(uint16); static void usbInit(void); static void usbReset(void); static RESULT usbDataSetup(uint8 request); static RESULT usbNoDataSetup(uint8 request); static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting); static uint8* usbGetDeviceDescriptor(uint16 length); static uint8* usbGetConfigDescriptor(uint16 length); static uint8* usbGetStringDescriptor(uint16 length); static void usbSetConfiguration(void); static void usbSetDeviceAddress(void); static void wait_reset(void); /* * VCOM config */ #define VCOM_CTRL_EPNUM 0x00 #define VCOM_CTRL_RX_ADDR 0x40 #define VCOM_CTRL_TX_ADDR 0x80 #define VCOM_CTRL_EPSIZE 0x40 #define VCOM_TX_ENDP 1 #define VCOM_TX_EPNUM 0x01 #define VCOM_TX_ADDR 0xC0 #define VCOM_TX_EPSIZE 0x40 #define VCOM_NOTIFICATION_ENDP 2 #define VCOM_NOTIFICATION_EPNUM 0x02 #define VCOM_NOTIFICATION_ADDR 0x100 #define VCOM_NOTIFICATION_EPSIZE 0x40 #define VCOM_RX_ENDP 3 #define VCOM_RX_EPNUM 0x03 #define VCOM_RX_ADDR 0x110 #define VCOM_RX_EPSIZE 0x40 #define VCOM_RX_BUFLEN (VCOM_RX_EPSIZE*3) /* * CDC ACM Requests */ #define SET_LINE_CODING 0x20 #define GET_LINE_CODING 0x21 #define SET_COMM_FEATURE 0x02 #define SET_CONTROL_LINE_STATE 0x22 #define CONTROL_LINE_DTR (0x01) #define CONTROL_LINE_RTS (0x02) /* * Descriptors */ #define USB_DEVICE_CLASS_CDC 0x02 #define USB_DEVICE_SUBCLASS_CDC 0x00 #define LEAFLABS_ID_VENDOR 0x1EAF #define MAPLE_ID_PRODUCT 0x0004 const USB_Descriptor_Device usbVcomDescriptor_Device = { .bLength = sizeof(USB_Descriptor_Device), .bDescriptorType = USB_DESCRIPTOR_TYPE_DEVICE, .bcdUSB = 0x0200, .bDeviceClass = USB_DEVICE_CLASS_CDC, .bDeviceSubClass = USB_DEVICE_SUBCLASS_CDC, .bDeviceProtocol = 0x00, .bMaxPacketSize0 = 0x40, .idVendor = LEAFLABS_ID_VENDOR, .idProduct = MAPLE_ID_PRODUCT, .bcdDevice = 0x0200, .iManufacturer = 0x01, .iProduct = 0x02, .iSerialNumber = 0x00, .bNumConfigurations = 0x01, }; #define MAX_POWER (100 >> 1) const USB_Descriptor_Config usbVcomDescriptor_Config = { .Config_Header = { .bLength = sizeof(USB_Descriptor_Config_Header), .bDescriptorType = USB_DESCRIPTOR_TYPE_CONFIGURATION, .wTotalLength = sizeof(USB_Descriptor_Config), .bNumInterfaces = 0x02, .bConfigurationValue = 0x01, .iConfiguration = 0x00, .bmAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELF_POWERED), .bMaxPower = MAX_POWER, }, .CCI_Interface = { .bLength = sizeof(USB_Descriptor_Interface), .bDescriptorType = USB_DESCRIPTOR_TYPE_INTERFACE, .bInterfaceNumber = 0x00, .bAlternateSetting = 0x00, .bNumEndpoints = 0x01, .bInterfaceClass = USB_INTERFACE_CLASS_CDC, .bInterfaceSubClass = USB_INTERFACE_SUBCLASS_CDC_ACM, .bInterfaceProtocol = 0x01, /* Common AT Commands */ .iInterface = 0x00, }, .CDC_Functional_IntHeader = { .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), .bDescriptorType = 0x24, .SubType = 0x00, .Data = {0x01, 0x10}, }, .CDC_Functional_CallManagement = { .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), .bDescriptorType = 0x24, .SubType = 0x01, .Data = {0x03, 0x01}, }, .CDC_Functional_ACM = { .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(1), .bDescriptorType = 0x24, .SubType = 0x02, .Data = {0x06}, }, .CDC_Functional_Union = { .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), .bDescriptorType = 0x24, .SubType = 0x06, .Data = {0x00, 0x01}, }, .ManagementEndpoint = { .bLength = sizeof(USB_Descriptor_Endpoint), .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN | VCOM_NOTIFICATION_EPNUM), .bmAttributes = EP_TYPE_INTERRUPT, .wMaxPacketSize = VCOM_NOTIFICATION_EPSIZE, .bInterval = 0xFF, }, .DCI_Interface = { .bLength = sizeof(USB_Descriptor_Interface), .bDescriptorType = USB_DESCRIPTOR_TYPE_INTERFACE, .bInterfaceNumber = 0x01, .bAlternateSetting = 0x00, .bNumEndpoints = 0x02, .bInterfaceClass = USB_INTERFACE_CLASS_DIC, .bInterfaceSubClass = 0x00, /* None */ .bInterfaceProtocol = 0x00, /* None */ .iInterface = 0x00, }, .DataOutEndpoint = { .bLength = sizeof(USB_Descriptor_Endpoint), .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_OUT | VCOM_RX_EPNUM), .bmAttributes = EP_TYPE_BULK, .wMaxPacketSize = VCOM_RX_EPSIZE, .bInterval = 0x00, }, .DataInEndpoint = { .bLength = sizeof(USB_Descriptor_Endpoint), .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN | VCOM_TX_EPNUM), .bmAttributes = EP_TYPE_BULK, .wMaxPacketSize = VCOM_TX_EPSIZE, .bInterval = 0x00, }, }; /* String Identifiers: we may choose to specify any or none of the following string identifiers: iManufacturer: LeafLabs iProduct: Maple iSerialNumber: NONE iConfiguration: NONE iInterface(CCI): NONE iInterface(DCI): NONE additionally we must provide the unicode language identifier, which is 0x0409 for US English */ const uint8 usbVcomDescriptor_LangID[USB_DESCRIPTOR_STRING_LEN(1)] = { USB_DESCRIPTOR_STRING_LEN(1), USB_DESCRIPTOR_TYPE_STRING, 0x09, 0x04, }; const uint8 usbVcomDescriptor_iManufacturer[USB_DESCRIPTOR_STRING_LEN(8)] = { USB_DESCRIPTOR_STRING_LEN(8), USB_DESCRIPTOR_TYPE_STRING, 'L', 0, 'e', 0, 'a', 0, 'f', 0, 'L', 0, 'a', 0, 'b', 0, 's', 0, }; const uint8 usbVcomDescriptor_iProduct[USB_DESCRIPTOR_STRING_LEN(8)] = { USB_DESCRIPTOR_STRING_LEN(8), USB_DESCRIPTOR_TYPE_STRING, 'M', 0, 'a', 0, 'p', 0, 'l', 0, 'e', 0, ' ', 0, ' ', 0, ' ', 0 }; ONE_DESCRIPTOR Device_Descriptor = { (uint8*)&usbVcomDescriptor_Device, sizeof(USB_Descriptor_Device) }; ONE_DESCRIPTOR Config_Descriptor = { (uint8*)&usbVcomDescriptor_Config, sizeof(USB_Descriptor_Config) }; ONE_DESCRIPTOR String_Descriptor[3] = { {(uint8*)&usbVcomDescriptor_LangID, USB_DESCRIPTOR_STRING_LEN(1)}, {(uint8*)&usbVcomDescriptor_iManufacturer,USB_DESCRIPTOR_STRING_LEN(8)}, {(uint8*)&usbVcomDescriptor_iProduct, USB_DESCRIPTOR_STRING_LEN(8)} }; /* * Etc. */ typedef enum { DTR_UNSET, DTR_HIGH, DTR_NEGEDGE, DTR_LOW } RESET_STATE; typedef struct { uint32 bitrate; uint8 format; uint8 paritytype; uint8 datatype; } USB_Line_Coding; uint8 last_request = 0; USB_Line_Coding line_coding = { .bitrate = 115200, .format = 0x00, /* stop bits-1 */ .paritytype = 0x00, .datatype = 0x08 }; uint8 vcomBufferRx[VCOM_RX_BUFLEN]; volatile uint32 countTx = 0; volatile uint32 recvBufIn = 0; volatile uint32 recvBufOut = 0; volatile uint32 maxNewBytes = VCOM_RX_BUFLEN; volatile uint32 newBytes = 0; RESET_STATE reset_state = DTR_UNSET; uint8 line_dtr_rts = 0; /* * Endpoint callbacks */ static void (*ep_int_in[7])(void) = {vcomDataTxCb, NOP_Process, NOP_Process, NOP_Process, NOP_Process, NOP_Process, NOP_Process}; static void (*ep_int_out[7])(void) = {NOP_Process, NOP_Process, vcomDataRxCb, NOP_Process, NOP_Process, NOP_Process, NOP_Process}; /* * Globals required by usb_lib/ */ #define NUM_ENDPTS 0x04 DEVICE Device_Table = { .Total_Endpoint = NUM_ENDPTS, .Total_Configuration = 1 }; #define MAX_PACKET_SIZE 0x40 /* 64B, maximum for USB FS Devices */ DEVICE_PROP Device_Property = { .Init = usbInit, .Reset = usbReset, .Process_Status_IN = NOP_Process, .Process_Status_OUT = NOP_Process, .Class_Data_Setup = usbDataSetup, .Class_NoData_Setup = usbNoDataSetup, .Class_Get_Interface_Setting = usbGetInterfaceSetting, .GetDeviceDescriptor = usbGetDeviceDescriptor, .GetConfigDescriptor = usbGetConfigDescriptor, .GetStringDescriptor = usbGetStringDescriptor, .RxEP_buffer = NULL, .MaxPacketSize = MAX_PACKET_SIZE }; USER_STANDARD_REQUESTS User_Standard_Requests = { .User_GetConfiguration = NOP_Process, .User_SetConfiguration = usbSetConfiguration, .User_GetInterface = NOP_Process, .User_SetInterface = NOP_Process, .User_GetStatus = NOP_Process, .User_ClearFeature = NOP_Process, .User_SetEndPointFeature = NOP_Process, .User_SetDeviceFeature = NOP_Process, .User_SetDeviceAddress = usbSetDeviceAddress }; /* * CDC ACM interface */ void usb_cdcacm_enable(gpio_dev *disc_dev, uint8 disc_bit) { /* Present ourselves to the host. Writing 0 to "disc" pin must * pull USB_DP pin up while leaving USB_DM pulled down by the * transceiver. See USB 2.0 spec, section 7.1.7.3. */ gpio_set_mode(disc_dev, disc_bit, GPIO_OUTPUT_PP); gpio_write_bit(disc_dev, disc_bit, 0); /* Initialize the USB peripheral. */ usb_init_usblib(USBLIB, ep_int_in, ep_int_out); } void usb_cdcacm_disable(gpio_dev *disc_dev, uint8 disc_bit) { /* Turn off the interrupt and signal disconnect (see e.g. USB 2.0 * spec, section 7.1.7.3). */ nvic_irq_disable(NVIC_USB_LP_CAN_RX0); gpio_write_bit(disc_dev, disc_bit, 1); } void usb_cdcacm_putc(char ch) { while (!usb_cdcacm_tx((uint8*)&ch, 1)) ; } /* This function is non-blocking. * * It copies data from a usercode buffer into the USB peripheral TX * buffer and return the number placed in that buffer. */ uint32 usb_cdcacm_tx(const uint8* buf, uint32 len) { /* Last transmission hasn't finished, abort */ if (countTx) { return 0; } // We can only put VCOM_TX_EPSIZE bytes in the buffer /* FIXME then why are we only copying half as many? */ if (len > VCOM_TX_EPSIZE / 2) { len = VCOM_TX_EPSIZE / 2; } // Try to load some bytes if we can if (len) { usb_copy_to_pma(buf, len, VCOM_TX_ADDR); usb_set_ep_tx_count(VCOM_TX_ENDP, len); countTx += len; usb_set_ep_tx_stat(VCOM_TX_ENDP, USB_EP_STAT_TX_VALID); } return len; } /* returns the number of available bytes are in the recv FIFO */ uint32 usb_cdcacm_data_available(void) { return newBytes; } uint16 usb_cdcacm_get_pending() { return countTx; } /* Nonblocking byte receive. * * Copies up to len bytes from our private data buffer (*NOT* the PMA) * into buf and deq's the FIFO. */ uint32 usb_cdcacm_rx(uint8* buf, uint32 len) { static int offset = 0; int i; if (len > newBytes) { len = newBytes; } for (i = 0; i < len; i++) { buf[i] = vcomBufferRx[i + offset]; } newBytes -= len; offset += len; /* Re-enable the RX endpoint, which we had set to receive 0 bytes */ if (newBytes == 0) { usb_set_ep_rx_count(VCOM_RX_ENDP, VCOM_RX_EPSIZE); usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_VALID); offset = 0; } return len; } uint8 usb_cdcacm_get_dtr() { return ((line_dtr_rts & CONTROL_LINE_DTR) != 0); } uint8 usb_cdcacm_get_rts() { return ((line_dtr_rts & CONTROL_LINE_RTS) != 0); } /* * Callbacks */ static void vcomDataTxCb(void) { /* assumes tx transactions are atomic 64 bytes (nearly certain they are) */ countTx = 0; } #define EXC_RETURN 0xFFFFFFF9 #define DEFAULT_CPSR 0x61000000 static void vcomDataRxCb(void) { /* FIXME this is mad buggy */ /* setEPRxCount on the previous cycle should garuntee we havnt received more bytes than we can fit */ newBytes = usb_get_ep_rx_count(VCOM_RX_ENDP); usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_NAK); /* magic number, {0x31, 0x45, 0x41, 0x46} is "1EAF" */ uint8 chkBuf[4]; uint8 cmpBuf[4] = {0x31, 0x45, 0x41, 0x46}; if (reset_state == DTR_NEGEDGE) { reset_state = DTR_LOW; if (newBytes >= 4) { unsigned int target = (unsigned int)wait_reset | 0x1; usb_copy_from_pma(chkBuf, 4, VCOM_RX_ADDR); int i; USB_Bool cmpMatch = TRUE; for (i = 0; i < 4; i++) { if (chkBuf[i] != cmpBuf[i]) { cmpMatch = FALSE; } } if (cmpMatch) { asm volatile("mov r0, %[stack_top] \n\t" // Reset stack "mov sp, r0 \n\t" "mov r0, #1 \n\t" "mov r1, %[target_addr] \n\t" "mov r2, %[cpsr] \n\t" "push {r2} \n\t" // Fake xPSR "push {r1} \n\t" // PC target addr "push {r0} \n\t" // Fake LR "push {r0} \n\t" // Fake R12 "push {r0} \n\t" // Fake R3 "push {r0} \n\t" // Fake R2 "push {r0} \n\t" // Fake R1 "push {r0} \n\t" // Fake R0 "mov lr, %[exc_return] \n\t" "bx lr" : : [stack_top] "r" (STACK_TOP), [target_addr] "r" (target), [exc_return] "r" (EXC_RETURN), [cpsr] "r" (DEFAULT_CPSR) : "r0", "r1", "r2"); /* should never get here */ } } } usb_copy_from_pma(vcomBufferRx, newBytes, VCOM_RX_ADDR); } static uint8* vcomGetSetLineCoding(uint16 length) { if (length == 0) { pInformation->Ctrl_Info.Usb_wLength = sizeof(USB_Line_Coding); } return (uint8*)&line_coding; } static void usbInit(void) { pInformation->Current_Configuration = 0; USB_BASE->CNTR = USB_CNTR_FRES; USBLIB->irq_mask = 0; USB_BASE->CNTR = USBLIB->irq_mask; USB_BASE->ISTR = 0; USBLIB->irq_mask = USB_CNTR_RESETM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; USB_BASE->CNTR = USBLIB->irq_mask; USB_BASE->ISTR = 0; USBLIB->irq_mask = USB_ISR_MSK; USB_BASE->CNTR = USBLIB->irq_mask; nvic_irq_enable(NVIC_USB_LP_CAN_RX0); USBLIB->state = USB_UNCONNECTED; } /* choose addresses to give endpoints the max 64 byte buffers */ #define BTABLE_ADDRESS 0x00 static void usbReset(void) { pInformation->Current_Configuration = 0; /* current feature is current bmAttributes */ pInformation->Current_Feature = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELF_POWERED); USB_BASE->BTABLE = BTABLE_ADDRESS; /* setup control endpoint 0 */ usb_set_ep_type(USB_EP0, USB_EP_EP_TYPE_CONTROL); usb_set_ep_tx_stat(USB_EP0, USB_EP_STAT_TX_STALL); usb_set_ep_rx_addr(USB_EP0, VCOM_CTRL_RX_ADDR); usb_set_ep_tx_addr(USB_EP0, VCOM_CTRL_TX_ADDR); usb_clear_status_out(USB_EP0); usb_set_ep_rx_count(USB_EP0, pProperty->MaxPacketSize); usb_set_ep_rx_stat(USB_EP0, USB_EP_STAT_RX_VALID); /* setup management endpoint 1 */ usb_set_ep_type(VCOM_NOTIFICATION_ENDP, USB_EP_EP_TYPE_INTERRUPT); usb_set_ep_tx_addr(VCOM_NOTIFICATION_ENDP, VCOM_NOTIFICATION_ADDR); usb_set_ep_tx_stat(VCOM_NOTIFICATION_ENDP, USB_EP_STAT_TX_NAK); usb_set_ep_rx_stat(VCOM_NOTIFICATION_ENDP, USB_EP_STAT_RX_DISABLED); /* TODO figure out differences in style between RX/TX EP setup */ /* set up data endpoint OUT (RX) */ usb_set_ep_type(VCOM_RX_ENDP, USB_EP_EP_TYPE_BULK); usb_set_ep_rx_addr(VCOM_RX_ENDP, 0x110); usb_set_ep_rx_count(VCOM_RX_ENDP, 64); usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_VALID); /* set up data endpoint IN (TX) */ usb_set_ep_type(VCOM_TX_ENDP, USB_EP_EP_TYPE_BULK); usb_set_ep_tx_addr(VCOM_TX_ENDP, VCOM_TX_ADDR); usb_set_ep_tx_stat(VCOM_TX_ENDP, USB_EP_STAT_TX_NAK); usb_set_ep_rx_stat(VCOM_TX_ENDP, USB_EP_STAT_RX_DISABLED); USBLIB->state = USB_ATTACHED; SetDeviceAddress(0); /* reset the rx fifo */ recvBufIn = 0; recvBufOut = 0; maxNewBytes = VCOM_RX_EPSIZE; countTx = 0; } static RESULT usbDataSetup(uint8 request) { uint8 *(*CopyRoutine)(uint16); CopyRoutine = NULL; if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) { switch (request) { case (GET_LINE_CODING): CopyRoutine = vcomGetSetLineCoding; last_request = GET_LINE_CODING; break; case (SET_LINE_CODING): CopyRoutine = vcomGetSetLineCoding; last_request = SET_LINE_CODING; break; default: break; } } if (CopyRoutine == NULL) { return USB_UNSUPPORT; } pInformation->Ctrl_Info.CopyData = CopyRoutine; pInformation->Ctrl_Info.Usb_wOffset = 0; (*CopyRoutine)(0); return USB_SUCCESS; } static RESULT usbNoDataSetup(uint8 request) { uint8 new_signal; /* we support set com feature but dont handle it */ if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) { switch (request) { case (SET_COMM_FEATURE): return USB_SUCCESS; case (SET_CONTROL_LINE_STATE): /* to reset the board, pull both dtr and rts low then pulse dtr by itself */ new_signal = (pInformation->USBwValues.bw.bb0 & (CONTROL_LINE_DTR | CONTROL_LINE_RTS)); line_dtr_rts = new_signal & 0x03; switch (reset_state) { /* no default, covered enum */ case DTR_UNSET: if ((new_signal & CONTROL_LINE_DTR) == 0 ) { reset_state = DTR_LOW; } else { reset_state = DTR_HIGH; } break; case DTR_HIGH: if ((new_signal & CONTROL_LINE_DTR) == 0 ) { reset_state = DTR_NEGEDGE; } else { reset_state = DTR_HIGH; } break; case DTR_NEGEDGE: if ((new_signal & CONTROL_LINE_DTR) == 0 ) { reset_state = DTR_LOW; } else { reset_state = DTR_HIGH; } break; case DTR_LOW: if ((new_signal & CONTROL_LINE_DTR) == 0 ) { reset_state = DTR_LOW; } else { reset_state = DTR_HIGH; } break; } return USB_SUCCESS; } } return USB_UNSUPPORT; } static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting) { if (alt_setting > 0) { return USB_UNSUPPORT; } else if (interface > 1) { return USB_UNSUPPORT; } return USB_SUCCESS; } static uint8* usbGetDeviceDescriptor(uint16 length) { return Standard_GetDescriptorData(length, &Device_Descriptor); } static uint8* usbGetConfigDescriptor(uint16 length) { return Standard_GetDescriptorData(length, &Config_Descriptor); } static uint8* usbGetStringDescriptor(uint16 length) { uint8 wValue0 = pInformation->USBwValue0; if (wValue0 > 2) { return NULL; } return Standard_GetDescriptorData(length, &String_Descriptor[wValue0]); } static void usbSetConfiguration(void) { if (pInformation->Current_Configuration != 0) { USBLIB->state = USB_CONFIGURED; } } static void usbSetDeviceAddress(void) { USBLIB->state = USB_ADDRESSED; } #define RESET_DELAY 100000 static void wait_reset(void) { delay_us(RESET_DELAY); nvic_sys_reset(); }