/****************************************************************************** * The MIT License * * Copyright (c) 2011 LeafLabs LLC. * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, copy, * modify, merge, publish, distribute, sublicense, and/or sell copies * of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. *****************************************************************************/ /** * @file libmaple/usb/stm32f1/usb_cdcacm.c * @brief USB CDC ACM (a.k.a. virtual serial terminal, VCOM). * * FIXME: this works on the STM32F1 USB peripherals, and probably no * place else. Nonportable bits really need to be factored out, and * the result made cleaner. */ #include #include #include #include /* Private headers */ #include "usb_lib_globals.h" #include "usb_reg_map.h" /* usb_lib headers */ #include "usb_type.h" #include "usb_core.h" #include "usb_def.h" /****************************************************************************** ****************************************************************************** *** *** HACK ALERT! FIXME FIXME FIXME FIXME! *** *** A bunch of LeafLabs-specific configuration lives in here for *** now. This mess REALLY needs to get teased apart, with *** appropriate pieces moved into Wirish. *** ****************************************************************************** *****************************************************************************/ #if !(defined(BOARD_maple) || defined(BOARD_maple_RET6) || \ defined(BOARD_maple_mini) || defined(BOARD_maple_native)) #warning USB CDC ACM relies on LeafLabs board-specific configuration.\ You may have problems on non-LeafLabs boards. #endif static void vcomDataTxCb(void); static void vcomDataRxCb(void); static uint8* vcomGetSetLineCoding(uint16); static void usbInit(void); static void usbReset(void); static RESULT usbDataSetup(uint8 request); static RESULT usbNoDataSetup(uint8 request); static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting); static uint8* usbGetDeviceDescriptor(uint16 length); static uint8* usbGetConfigDescriptor(uint16 length); static uint8* usbGetStringDescriptor(uint16 length); static void usbSetConfiguration(void); static void usbSetDeviceAddress(void); /* * Descriptors */ /* FIXME move to Wirish */ #define LEAFLABS_ID_VENDOR 0x1EAF #define MAPLE_ID_PRODUCT 0x0004 static const usb_descriptor_device usbVcomDescriptor_Device = USB_CDCACM_DECLARE_DEV_DESC(LEAFLABS_ID_VENDOR, MAPLE_ID_PRODUCT); typedef struct { usb_descriptor_config_header Config_Header; usb_descriptor_interface CCI_Interface; CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_IntHeader; CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_CallManagement; CDC_FUNCTIONAL_DESCRIPTOR(1) CDC_Functional_ACM; CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_Union; usb_descriptor_endpoint ManagementEndpoint; usb_descriptor_interface DCI_Interface; usb_descriptor_endpoint DataOutEndpoint; usb_descriptor_endpoint DataInEndpoint; } __packed usb_descriptor_config; #define MAX_POWER (100 >> 1) static const usb_descriptor_config usbVcomDescriptor_Config = { .Config_Header = { .bLength = sizeof(usb_descriptor_config_header), .bDescriptorType = USB_DESCRIPTOR_TYPE_CONFIGURATION, .wTotalLength = sizeof(usb_descriptor_config), .bNumInterfaces = 0x02, .bConfigurationValue = 0x01, .iConfiguration = 0x00, .bmAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELF_POWERED), .bMaxPower = MAX_POWER, }, .CCI_Interface = { .bLength = sizeof(usb_descriptor_interface), .bDescriptorType = USB_DESCRIPTOR_TYPE_INTERFACE, .bInterfaceNumber = 0x00, .bAlternateSetting = 0x00, .bNumEndpoints = 0x01, .bInterfaceClass = USB_INTERFACE_CLASS_CDC, .bInterfaceSubClass = USB_INTERFACE_SUBCLASS_CDC_ACM, .bInterfaceProtocol = 0x01, /* Common AT Commands */ .iInterface = 0x00, }, .CDC_Functional_IntHeader = { .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), .bDescriptorType = 0x24, .SubType = 0x00, .Data = {0x01, 0x10}, }, .CDC_Functional_CallManagement = { .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), .bDescriptorType = 0x24, .SubType = 0x01, .Data = {0x03, 0x01}, }, .CDC_Functional_ACM = { .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(1), .bDescriptorType = 0x24, .SubType = 0x02, .Data = {0x06}, }, .CDC_Functional_Union = { .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), .bDescriptorType = 0x24, .SubType = 0x06, .Data = {0x00, 0x01}, }, .ManagementEndpoint = { .bLength = sizeof(usb_descriptor_endpoint), .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN | USB_CDCACM_MANAGEMENT_ENDP), .bmAttributes = USB_EP_TYPE_INTERRUPT, .wMaxPacketSize = USB_CDCACM_MANAGEMENT_EPSIZE, .bInterval = 0xFF, }, .DCI_Interface = { .bLength = sizeof(usb_descriptor_interface), .bDescriptorType = USB_DESCRIPTOR_TYPE_INTERFACE, .bInterfaceNumber = 0x01, .bAlternateSetting = 0x00, .bNumEndpoints = 0x02, .bInterfaceClass = USB_INTERFACE_CLASS_DIC, .bInterfaceSubClass = 0x00, /* None */ .bInterfaceProtocol = 0x00, /* None */ .iInterface = 0x00, }, .DataOutEndpoint = { .bLength = sizeof(usb_descriptor_endpoint), .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_OUT | USB_CDCACM_RX_ENDP), .bmAttributes = USB_EP_TYPE_BULK, .wMaxPacketSize = USB_CDCACM_RX_EPSIZE, .bInterval = 0x00, }, .DataInEndpoint = { .bLength = sizeof(usb_descriptor_endpoint), .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN | USB_CDCACM_TX_ENDP), .bmAttributes = USB_EP_TYPE_BULK, .wMaxPacketSize = USB_CDCACM_TX_EPSIZE, .bInterval = 0x00, }, }; /* String Descriptors: we may choose to specify any or none of the following string identifiers: iManufacturer: LeafLabs iProduct: Maple iSerialNumber: NONE iConfiguration: NONE iInterface(CCI): NONE iInterface(DCI): NONE */ /* Unicode language identifier: 0x0409 is US English */ /* FIXME move to Wirish */ static const usb_descriptor_string usbVcomDescriptor_LangID = { .bLength = USB_DESCRIPTOR_STRING_LEN(1), .bDescriptorType = USB_DESCRIPTOR_TYPE_STRING, .bString = {0x09, 0x04}, }; /* FIXME move to Wirish */ static const usb_descriptor_string usbVcomDescriptor_iManufacturer = { .bLength = USB_DESCRIPTOR_STRING_LEN(8), .bDescriptorType = USB_DESCRIPTOR_TYPE_STRING, .bString = {'L', 0, 'e', 0, 'a', 0, 'f', 0, 'L', 0, 'a', 0, 'b', 0, 's', 0}, }; /* FIXME move to Wirish */ static const usb_descriptor_string usbVcomDescriptor_iProduct = { .bLength = USB_DESCRIPTOR_STRING_LEN(5), .bDescriptorType = USB_DESCRIPTOR_TYPE_STRING, .bString = {'M', 0, 'a', 0, 'p', 0, 'l', 0, 'e', 0}, }; static ONE_DESCRIPTOR Device_Descriptor = { (uint8*)&usbVcomDescriptor_Device, sizeof(usb_descriptor_device) }; static ONE_DESCRIPTOR Config_Descriptor = { (uint8*)&usbVcomDescriptor_Config, sizeof(usb_descriptor_config) }; #define N_STRING_DESCRIPTORS 3 static ONE_DESCRIPTOR String_Descriptor[N_STRING_DESCRIPTORS] = { {(uint8*)&usbVcomDescriptor_LangID, USB_DESCRIPTOR_STRING_LEN(1)}, {(uint8*)&usbVcomDescriptor_iManufacturer,USB_DESCRIPTOR_STRING_LEN(8)}, {(uint8*)&usbVcomDescriptor_iProduct, USB_DESCRIPTOR_STRING_LEN(5)} }; /* * Etc. */ /* I/O state */ /* Received data */ static volatile uint8 vcomBufferRx[USB_CDCACM_RX_EPSIZE]; /* Read index into vcomBufferRx */ static volatile uint32 rx_offset = 0; /* Number of bytes left to transmit */ static volatile uint32 n_unsent_bytes = 0; /* Are we currently sending an IN packet? */ static volatile uint8 transmitting = 0; /* Number of unread bytes */ static volatile uint32 n_unread_bytes = 0; /* Other state (line coding, DTR/RTS) */ static volatile usb_cdcacm_line_coding line_coding = { /* This default is 115200 baud, 8N1. */ .dwDTERate = 115200, .bCharFormat = USB_CDCACM_STOP_BITS_1, .bParityType = USB_CDCACM_PARITY_NONE, .bDataBits = 8, }; /* DTR in bit 0, RTS in bit 1. */ static volatile uint8 line_dtr_rts = 0; /* * Endpoint callbacks */ static void (*ep_int_in[7])(void) = {vcomDataTxCb, NOP_Process, NOP_Process, NOP_Process, NOP_Process, NOP_Process, NOP_Process}; static void (*ep_int_out[7])(void) = {NOP_Process, NOP_Process, vcomDataRxCb, NOP_Process, NOP_Process, NOP_Process, NOP_Process}; /* * Globals required by usb_lib/ */ #define NUM_ENDPTS 0x04 DEVICE Device_Table = { .Total_Endpoint = NUM_ENDPTS, .Total_Configuration = 1 }; #define MAX_PACKET_SIZE 0x40 /* 64B, maximum for USB FS Devices */ DEVICE_PROP Device_Property = { .Init = usbInit, .Reset = usbReset, .Process_Status_IN = NOP_Process, .Process_Status_OUT = NOP_Process, .Class_Data_Setup = usbDataSetup, .Class_NoData_Setup = usbNoDataSetup, .Class_Get_Interface_Setting = usbGetInterfaceSetting, .GetDeviceDescriptor = usbGetDeviceDescriptor, .GetConfigDescriptor = usbGetConfigDescriptor, .GetStringDescriptor = usbGetStringDescriptor, .RxEP_buffer = NULL, .MaxPacketSize = MAX_PACKET_SIZE }; USER_STANDARD_REQUESTS User_Standard_Requests = { .User_GetConfiguration = NOP_Process, .User_SetConfiguration = usbSetConfiguration, .User_GetInterface = NOP_Process, .User_SetInterface = NOP_Process, .User_GetStatus = NOP_Process, .User_ClearFeature = NOP_Process, .User_SetEndPointFeature = NOP_Process, .User_SetDeviceFeature = NOP_Process, .User_SetDeviceAddress = usbSetDeviceAddress }; /* * User hooks */ static void (*rx_hook)(unsigned, void*) = 0; static void (*iface_setup_hook)(unsigned, void*) = 0; void usb_cdcacm_set_hooks(unsigned hook_flags, void (*hook)(unsigned, void*)) { if (hook_flags & USB_CDCACM_HOOK_RX) { rx_hook = hook; } if (hook_flags & USB_CDCACM_HOOK_IFACE_SETUP) { iface_setup_hook = hook; } } /* * CDC ACM interface */ void usb_cdcacm_enable(gpio_dev *disc_dev, uint8 disc_bit) { /* Present ourselves to the host. Writing 0 to "disc" pin must * pull USB_DP pin up while leaving USB_DM pulled down by the * transceiver. See USB 2.0 spec, section 7.1.7.3. */ gpio_set_mode(disc_dev, disc_bit, GPIO_OUTPUT_PP); gpio_write_bit(disc_dev, disc_bit, 0); /* Initialize the USB peripheral. */ usb_init_usblib(USBLIB, ep_int_in, ep_int_out); } void usb_cdcacm_disable(gpio_dev *disc_dev, uint8 disc_bit) { /* Turn off the interrupt and signal disconnect (see e.g. USB 2.0 * spec, section 7.1.7.3). */ nvic_irq_disable(NVIC_USB_LP_CAN_RX0); gpio_write_bit(disc_dev, disc_bit, 1); } void usb_cdcacm_putc(char ch) { while (!usb_cdcacm_tx((uint8*)&ch, 1)) ; } /* This function is non-blocking. * * It copies data from a usercode buffer into the USB peripheral TX * buffer, and returns the number of bytes copied. */ uint32 usb_cdcacm_tx(const uint8* buf, uint32 len) { /* Last transmission hasn't finished, so abort. */ if (usb_cdcacm_is_transmitting()) { return 0; } /* We can only put USB_CDCACM_TX_EPSIZE bytes in the buffer. */ if (len > USB_CDCACM_TX_EPSIZE) { len = USB_CDCACM_TX_EPSIZE; } /* Queue bytes for sending. */ if (len) { usb_copy_to_pma(buf, len, USB_CDCACM_TX_ADDR); } // We still need to wait for the interrupt, even if we're sending // zero bytes. (Sending zero-size packets is useful for flushing // host-side buffers.) usb_set_ep_tx_count(USB_CDCACM_TX_ENDP, len); n_unsent_bytes = len; transmitting = 1; usb_set_ep_tx_stat(USB_CDCACM_TX_ENDP, USB_EP_STAT_TX_VALID); return len; } uint32 usb_cdcacm_data_available(void) { return n_unread_bytes; } uint8 usb_cdcacm_is_transmitting(void) { return transmitting; } uint16 usb_cdcacm_get_pending(void) { return n_unsent_bytes; } /* Nonblocking byte receive. * * Copies up to len bytes from our private data buffer (*NOT* the PMA) * into buf and deq's the FIFO. */ uint32 usb_cdcacm_rx(uint8* buf, uint32 len) { /* Copy bytes to buffer. */ uint32 n_copied = usb_cdcacm_peek(buf, len); /* Mark bytes as read. */ n_unread_bytes -= n_copied; rx_offset += n_copied; /* If all bytes have been read, re-enable the RX endpoint, which * was set to NAK when the current batch of bytes was received. */ if (n_unread_bytes == 0) { usb_set_ep_rx_count(USB_CDCACM_RX_ENDP, USB_CDCACM_RX_EPSIZE); usb_set_ep_rx_stat(USB_CDCACM_RX_ENDP, USB_EP_STAT_RX_VALID); rx_offset = 0; } return n_copied; } /* Nonblocking byte lookahead. * * Looks at unread bytes without marking them as read. */ uint32 usb_cdcacm_peek(uint8* buf, uint32 len) { int i; if (len > n_unread_bytes) { len = n_unread_bytes; } for (i = 0; i < len; i++) { buf[i] = vcomBufferRx[i + rx_offset]; } return len; } uint8 usb_cdcacm_get_dtr() { return ((line_dtr_rts & USB_CDCACM_CONTROL_LINE_DTR) != 0); } uint8 usb_cdcacm_get_rts() { return ((line_dtr_rts & USB_CDCACM_CONTROL_LINE_RTS) != 0); } void usb_cdcacm_get_line_coding(usb_cdcacm_line_coding *ret) { ret->dwDTERate = line_coding.dwDTERate; ret->bCharFormat = line_coding.bCharFormat; ret->bParityType = line_coding.bParityType; ret->bDataBits = line_coding.bDataBits; } int usb_cdcacm_get_baud(void) { return line_coding.dwDTERate; } int usb_cdcacm_get_stop_bits(void) { return line_coding.bCharFormat; } int usb_cdcacm_get_parity(void) { return line_coding.bParityType; } int usb_cdcacm_get_n_data_bits(void) { return line_coding.bDataBits; } /* * Callbacks */ static void vcomDataTxCb(void) { n_unsent_bytes = 0; transmitting = 0; } static void vcomDataRxCb(void) { usb_set_ep_rx_stat(USB_CDCACM_RX_ENDP, USB_EP_STAT_RX_NAK); n_unread_bytes = usb_get_ep_rx_count(USB_CDCACM_RX_ENDP); /* This copy won't overwrite unread bytes, since we've set the RX * endpoint to NAK, and will only set it to VALID when all bytes * have been read. */ usb_copy_from_pma((uint8*)vcomBufferRx, n_unread_bytes, USB_CDCACM_RX_ADDR); if (n_unread_bytes == 0) { usb_set_ep_rx_count(USB_CDCACM_RX_ENDP, USB_CDCACM_RX_EPSIZE); usb_set_ep_rx_stat(USB_CDCACM_RX_ENDP, USB_EP_STAT_RX_VALID); rx_offset = 0; } if (rx_hook) { rx_hook(USB_CDCACM_HOOK_RX, 0); } } static uint8* vcomGetSetLineCoding(uint16 length) { if (length == 0) { pInformation->Ctrl_Info.Usb_wLength = sizeof(struct usb_cdcacm_line_coding); } return (uint8*)&line_coding; } static void usbInit(void) { pInformation->Current_Configuration = 0; USB_BASE->CNTR = USB_CNTR_FRES; USBLIB->irq_mask = 0; USB_BASE->CNTR = USBLIB->irq_mask; USB_BASE->ISTR = 0; USBLIB->irq_mask = USB_CNTR_RESETM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; USB_BASE->CNTR = USBLIB->irq_mask; USB_BASE->ISTR = 0; USBLIB->irq_mask = USB_ISR_MSK; USB_BASE->CNTR = USBLIB->irq_mask; nvic_irq_enable(NVIC_USB_LP_CAN_RX0); USBLIB->state = USB_UNCONNECTED; } #define BTABLE_ADDRESS 0x00 static void usbReset(void) { pInformation->Current_Configuration = 0; /* current feature is current bmAttributes */ pInformation->Current_Feature = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELF_POWERED); USB_BASE->BTABLE = BTABLE_ADDRESS; /* setup control endpoint 0 */ usb_set_ep_type(USB_EP0, USB_EP_EP_TYPE_CONTROL); usb_set_ep_tx_stat(USB_EP0, USB_EP_STAT_TX_STALL); usb_set_ep_rx_addr(USB_EP0, USB_CDCACM_CTRL_RX_ADDR); usb_set_ep_tx_addr(USB_EP0, USB_CDCACM_CTRL_TX_ADDR); usb_clear_status_out(USB_EP0); usb_set_ep_rx_count(USB_EP0, pProperty->MaxPacketSize); usb_set_ep_rx_stat(USB_EP0, USB_EP_STAT_RX_VALID); /* setup management endpoint 1 */ usb_set_ep_type(USB_CDCACM_MANAGEMENT_ENDP, USB_EP_EP_TYPE_INTERRUPT); usb_set_ep_tx_addr(USB_CDCACM_MANAGEMENT_ENDP, USB_CDCACM_MANAGEMENT_ADDR); usb_set_ep_tx_stat(USB_CDCACM_MANAGEMENT_ENDP, USB_EP_STAT_TX_NAK); usb_set_ep_rx_stat(USB_CDCACM_MANAGEMENT_ENDP, USB_EP_STAT_RX_DISABLED); /* TODO figure out differences in style between RX/TX EP setup */ /* set up data endpoint OUT (RX) */ usb_set_ep_type(USB_CDCACM_RX_ENDP, USB_EP_EP_TYPE_BULK); usb_set_ep_rx_addr(USB_CDCACM_RX_ENDP, USB_CDCACM_RX_ADDR); usb_set_ep_rx_count(USB_CDCACM_RX_ENDP, USB_CDCACM_RX_EPSIZE); usb_set_ep_rx_stat(USB_CDCACM_RX_ENDP, USB_EP_STAT_RX_VALID); /* set up data endpoint IN (TX) */ usb_set_ep_type(USB_CDCACM_TX_ENDP, USB_EP_EP_TYPE_BULK); usb_set_ep_tx_addr(USB_CDCACM_TX_ENDP, USB_CDCACM_TX_ADDR); usb_set_ep_tx_stat(USB_CDCACM_TX_ENDP, USB_EP_STAT_TX_NAK); usb_set_ep_rx_stat(USB_CDCACM_TX_ENDP, USB_EP_STAT_RX_DISABLED); USBLIB->state = USB_ATTACHED; SetDeviceAddress(0); /* Reset the RX/TX state */ n_unread_bytes = 0; n_unsent_bytes = 0; rx_offset = 0; } static RESULT usbDataSetup(uint8 request) { uint8* (*CopyRoutine)(uint16) = 0; if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) { switch (request) { case USB_CDCACM_GET_LINE_CODING: CopyRoutine = vcomGetSetLineCoding; break; case USB_CDCACM_SET_LINE_CODING: CopyRoutine = vcomGetSetLineCoding; break; default: break; } /* Call the user hook. */ if (iface_setup_hook) { uint8 req_copy = request; iface_setup_hook(USB_CDCACM_HOOK_IFACE_SETUP, &req_copy); } } if (CopyRoutine == NULL) { return USB_UNSUPPORT; } pInformation->Ctrl_Info.CopyData = CopyRoutine; pInformation->Ctrl_Info.Usb_wOffset = 0; (*CopyRoutine)(0); return USB_SUCCESS; } static RESULT usbNoDataSetup(uint8 request) { RESULT ret = USB_UNSUPPORT; if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) { switch (request) { case USB_CDCACM_SET_COMM_FEATURE: /* We support set comm. feature, but don't handle it. */ ret = USB_SUCCESS; break; case USB_CDCACM_SET_CONTROL_LINE_STATE: /* Track changes to DTR and RTS. */ line_dtr_rts = (pInformation->USBwValues.bw.bb0 & (USB_CDCACM_CONTROL_LINE_DTR | USB_CDCACM_CONTROL_LINE_RTS)); ret = USB_SUCCESS; break; } /* Call the user hook. */ if (iface_setup_hook) { uint8 req_copy = request; iface_setup_hook(USB_CDCACM_HOOK_IFACE_SETUP, &req_copy); } } return ret; } static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting) { if (alt_setting > 0) { return USB_UNSUPPORT; } else if (interface > 1) { return USB_UNSUPPORT; } return USB_SUCCESS; } static uint8* usbGetDeviceDescriptor(uint16 length) { return Standard_GetDescriptorData(length, &Device_Descriptor); } static uint8* usbGetConfigDescriptor(uint16 length) { return Standard_GetDescriptorData(length, &Config_Descriptor); } static uint8* usbGetStringDescriptor(uint16 length) { uint8 wValue0 = pInformation->USBwValue0; if (wValue0 > N_STRING_DESCRIPTORS) { return NULL; } return Standard_GetDescriptorData(length, &String_Descriptor[wValue0]); } static void usbSetConfiguration(void) { if (pInformation->Current_Configuration != 0) { USBLIB->state = USB_CONFIGURED; } } static void usbSetDeviceAddress(void) { USBLIB->state = USB_ADDRESSED; }