From d2494611156c4ba477a1bbd1b07ba0cfc14b29e4 Mon Sep 17 00:00:00 2001 From: Perry Hung Date: Wed, 4 Aug 2010 08:52:30 -0400 Subject: Cleaned up wirish/time, some interrupt handling refactoring: Fixed millis(), it was just wrong, before. Added micros(), not extensively tested. New implementation of delayMicroseconds(). Should be more consistent now. Added a handful of nvic routines to enable/disable interrupts. Cleaned up systick --- wirish/time.c | 53 ++++++++++++++--------------------------------------- 1 file changed, 14 insertions(+), 39 deletions(-) (limited to 'wirish/time.c') diff --git a/wirish/time.c b/wirish/time.c index 69e962c..c0fd03e 100644 --- a/wirish/time.c +++ b/wirish/time.c @@ -23,8 +23,6 @@ * ****************************************************************************/ /** - * @file time.c - * * @brief */ @@ -32,46 +30,23 @@ #include "systick.h" #include "time.h" -#define CYCLES_PER_MICROSECOND 72 -#define FUDGE 42 - -extern volatile uint32 systick_timer_millis; - -uint32 millis() { - unsigned long m; - m = systick_timer_millis; - return m; -} - void delay(unsigned long ms) { - unsigned long start = millis(); - - while (millis() - start <= ms) - ; + uint32 i; + for (i = 0; i < ms; i++) { + delayMicroseconds(1000); + } } - - -#if 1 void delayMicroseconds(uint32 us) { - uint32 target; - uint32 last, cur, count; - /* fudge factor hacky hack hack for function overhead */ - target = us * CYCLES_PER_MICROSECOND - FUDGE; - - /* Get current count */ - last = systick_get_count(); - cur = systick_get_count(); - count = last; - while ((count-cur) <= target) { - cur = systick_get_count(); - - /* check for overflow */ - if (cur > last) { - count += MAPLE_RELOAD_VAL; - } - last = cur; - } + us *= 12; + + /* fudge for function call overhead */ + us--; + asm volatile(" mov r0, %[us] \n\t" + "1: subs r0, #1 \n\t" + " bhi 1b \n\t" + : + : [us] "r" (us) + : "r0"); } -#endif -- cgit v1.2.3 From e03d58f4dab4176514924baa3a1ff430bf5819b8 Mon Sep 17 00:00:00 2001 From: bnewbold Date: Tue, 31 Aug 2010 17:17:57 -0400 Subject: Further wirish portability progress Sort of ugly changes. Compiles but untested. --- Makefile | 3 +- libmaple/gpio.h | 14 +++--- libmaple/libmaple.h | 49 +++++++++++++++++++-- libmaple/rcc.c | 1 + libmaple/rcc.h | 1 + notes/portable.txt | 33 +++++++++++++- wirish/HardwareTimer.cpp | 39 +++++++++++++++-- wirish/HardwareTimer.h | 14 ++++++ wirish/boards.h | 99 ++++++++++++++++++++++++++++++++++-------- wirish/comm/HardwareSerial.cpp | 1 + wirish/comm/HardwareSerial.h | 1 + wirish/time.c | 1 + wirish/time.h | 4 +- wirish/wirish.c | 12 +++-- wirish/wirish.h | 2 +- wirish/wirish_analog.c | 3 +- 16 files changed, 236 insertions(+), 41 deletions(-) (limited to 'wirish/time.c') diff --git a/Makefile b/Makefile index 862d5b1..28cd4f3 100644 --- a/Makefile +++ b/Makefile @@ -1,5 +1,6 @@ .DEFAULT_GOAL := sketch +# Valid BOARDs: maple, maple_native, ... BOARD ?= maple MEMORY_TARGET ?= flash @@ -12,7 +13,7 @@ ifeq ($(BOARD), maple) MCU := STM32F103RB PRODUCT_ID := 0003 endif -ifeq ($(BOARD), maple-native) +ifeq ($(BOARD), maple_native) MCU := STM32F103ZE PRODUCT_ID := 0003 endif diff --git a/libmaple/gpio.h b/libmaple/gpio.h index d1d0050..9099c9b 100644 --- a/libmaple/gpio.h +++ b/libmaple/gpio.h @@ -44,13 +44,13 @@ * - After reset, the alternate functions are not active and IO prts * are set to Input Floating mode */ -#define GPIOA_BASE (GPIO_Port*)0x40010800 -#define GPIOB_BASE (GPIO_Port*)0x40010C00 -#define GPIOC_BASE (GPIO_Port*)0x40011000 -#define GPIOD_BASE (GPIO_Port*)0x40011400 -#define GPIOE_BASE (GPIO_Port*)0x40011800 // High-density devices only -#define GPIOF_BASE (GPIO_Port*)0x40011C00 // High-density devices only -#define GPIOG_BASE (GPIO_Port*)0x40012000 // High-density devices only +#define GPIOA_BASE (GPIO_Port*)0x40010800 +#define GPIOB_BASE (GPIO_Port*)0x40010C00 +#define GPIOC_BASE (GPIO_Port*)0x40011000 +#define GPIOD_BASE (GPIO_Port*)0x40011400 +#define GPIOE_BASE (GPIO_Port*)0x40011800 // High-density devices only +#define GPIOF_BASE (GPIO_Port*)0x40011C00 // High-density devices only +#define GPIOG_BASE (GPIO_Port*)0x40012000 // High-density devices only #define GPIO_SPEED_50MHZ (0x3) diff --git a/libmaple/libmaple.h b/libmaple/libmaple.h index 1fd0785..a481e63 100644 --- a/libmaple/libmaple.h +++ b/libmaple/libmaple.h @@ -48,9 +48,6 @@ // Number of timer devices ports, definately used #define NR_TIMERS 4 - // Number of ADC pins. Not actually used? - #define NR_ANALOG_PINS 29 - // Has an FSMC bus? //#define HAS_FSMC // Maple does not @@ -86,6 +83,52 @@ #define BITBAND_PERI_BASE 0x42000000 #endif +#ifdef MCU_STM32F103ZE // eg, LeafLabs Maple Native + + // Number of GPIO ports (GPIOA, GPIOB, etc), definately used + #define NR_GPIO_PORTS 7 + + // Total number of GPIO pins + #define NR_GPIO_PINS 63 + + // Number of timer devices ports, definately used + #define NR_TIMERS 8 + + // Has an FSMC bus? + #define HAS_FSMC + + // USB Identifier numbers + // Descriptor strings must be modified by hand in usb/descriptors.c for now + #define VCOM_ID_VENDOR 0x1EAF + #define VCOM_ID_PRODUCT 0x0004 + #define USB_CONFIG_MAX_POWER (100 >> 1) + #define RESET_DELAY (100) + + // Where to put usercode (based on space reserved for bootloader) + #define USER_ADDR_ROM 0x08005000 + #define USER_ADDR_RAM 0x20000C00 + #define STACK_TOP 0x20000800 + + // Debug port settings (from ASSERT) + #define ERROR_LED_PORT GPIOA_BASE + #define ERROR_LED_PIN 5 + #define ERROR_USART_NUM 2 + #define ERROR_USART_BAUD 9600 + #define ERROR_TX_PIN 2 + #define ERROR_TX_PORT GPIOA_BASE + + // Just in case, most boards have at least some memory + #ifndef RAMSIZE + # define RAMSIZE (caddr_t)0x50000 + #endif + + // Bitbanded Memory sections + #define BITBAND_SRAM_REF 0x20000000 + #define BITBAND_SRAM_BASE 0x22000000 + #define BITBAND_PERI_REF 0x40000000 + #define BITBAND_PERI_BASE 0x42000000 +#endif + // Make sure MCU-specific settings were defined #ifndef NR_GPIO_PORTS #error Error: No MCU type specified. Add something like -DMCU_STM32F103RB \ diff --git a/libmaple/rcc.c b/libmaple/rcc.c index 4ac6629..848f59e 100644 --- a/libmaple/rcc.c +++ b/libmaple/rcc.c @@ -66,6 +66,7 @@ static const struct rcc_dev_info rcc_dev_table[] = { [RCC_TIMER5] = { .clk_domain = APB1, .line_num = 3 }, // High-density devices only [RCC_TIMER6] = { .clk_domain = APB1, .line_num = 4 }, // High-density devices only [RCC_TIMER7] = { .clk_domain = APB1, .line_num = 5 }, // High-density devices only + [RCC_TIMER8] = { .clk_domain = APB2, .line_num = 13 }, // High-density devices only [RCC_SPI1] = { .clk_domain = APB2, .line_num = 12 }, [RCC_SPI2] = { .clk_domain = APB1, .line_num = 14 }, }; diff --git a/libmaple/rcc.h b/libmaple/rcc.h index b369f25..3f55b4f 100644 --- a/libmaple/rcc.h +++ b/libmaple/rcc.h @@ -163,6 +163,7 @@ enum { RCC_TIMER5, // High-density devices only (Maple Native) RCC_TIMER6, // High-density devices only (Maple Native) RCC_TIMER7, // High-density devices only (Maple Native) + RCC_TIMER8, // High-density devices only (Maple Native) RCC_SPI1, RCC_SPI2, }; diff --git a/notes/portable.txt b/notes/portable.txt index a6dcb40..69952d7 100644 --- a/notes/portable.txt +++ b/notes/portable.txt @@ -38,7 +38,36 @@ Files to check by hand: # util.h # libmaple.h # usb/* -# wirish/* + +wirish/: +# bits.h +# boards.h +# cxxabi-compat.cpp +# ext_interrupts.c +# ext_interrupts.h +# HardwareTimer.cpp +# HardwareTimer.h +# io.h +# main.cxx +# Print.cpp +# Print.h +# pwm.c +# pwm.h +# rules.mk +# time.c +# time.h +# usb_serial.cpp +# usb_serial.h +# wirish_analog.c +# wirish.c +# wirish_digital.c +# wirish.h +# wirish_math.cpp +# wirish_math.h +# wirish_shift.c +# WProgram.h +- comm/ + ADC Notes: @@ -64,6 +93,8 @@ TIMER Notes: TIMER6 and TIMER7 are much less useful. There is some partial progress towards adding timer5/timer8 functionality, but not much. This should probably all be rewritten. + The wirish timer implementation should be refactored to use pin numbers. USART Notes: The USART/UART nomeclature is a little mixed up. + TODO: portability of HardwareSerial, HardwareSPI diff --git a/wirish/HardwareTimer.cpp b/wirish/HardwareTimer.cpp index 3c8e9f4..5675948 100644 --- a/wirish/HardwareTimer.cpp +++ b/wirish/HardwareTimer.cpp @@ -32,10 +32,7 @@ #include "HardwareTimer.h" HardwareTimer::HardwareTimer(uint8 timerNum) { - ASSERT(timerNum == 1 || - timerNum == 2 || - timerNum == 3 || - timerNum == 4); + ASSERT(timerNum < NR_TIMERS); this->timerNum = timerNum; // Need to remember over flow for bounds checking this->overflow = 0xFFFF; @@ -141,9 +138,43 @@ void HardwareTimer::detachCompare3Interrupt(void) { void HardwareTimer::detachCompare4Interrupt(void) { timer_detach_interrupt(this->timerNum,4); } +#if NR_TIMERS >= 8 +void HardwareTimer::setChannel5Mode(uint8 mode) { + timer_set_mode(this->timerNum,5,mode); +} +void HardwareTimer::setChannel8Mode(uint8 mode) { + timer_set_mode(this->timerNum,8,mode); +} +void HardwareTimer::setCompare5(uint16 val) { + if(val > this->overflow) + val = this->overflow; + timer_set_compare_value(this->timerNum,5,val); +} +void HardwareTimer::setCompare8(uint16 val) { + if(val > this->overflow) + val = this->overflow; + timer_set_compare_value(this->timerNum,8,val); +} +void HardwareTimer::attachCompare5Interrupt(voidFuncPtr handler) { + timer_attach_interrupt(this->timerNum,5,handler); +} +void HardwareTimer::attachCompare8Interrupt(voidFuncPtr handler) { + timer_attach_interrupt(this->timerNum,8,handler); +} +void HardwareTimer::detachCompare5Interrupt(void) { + timer_detach_interrupt(this->timerNum,5); +} +void HardwareTimer::detachCompare8Interrupt(void) { + timer_detach_interrupt(this->timerNum,8); +} +#endif HardwareTimer Timer1(1); HardwareTimer Timer2(2); HardwareTimer Timer3(3); HardwareTimer Timer4(4); +#if NR_TIMERS >= 8 +HardwareTimer Timer5(5); // High-density devices only +HardwareTimer Timer8(8); // High-density devices only +#endif diff --git a/wirish/HardwareTimer.h b/wirish/HardwareTimer.h index c79f54f..3f986e4 100644 --- a/wirish/HardwareTimer.h +++ b/wirish/HardwareTimer.h @@ -62,12 +62,26 @@ class HardwareTimer { void detachCompare2Interrupt(void); void detachCompare3Interrupt(void); void detachCompare4Interrupt(void); + #if NR_TIMERS >= 8 + void setChannel5Mode(uint8 mode); + void setChannel8Mode(uint8 mode); + void setCompare5(uint16 val); // truncates to overflow + void setCompare8(uint16 val); // truncates to overflow + void attachCompare5Interrupt(voidFuncPtr handler); + void attachCompare8Interrupt(voidFuncPtr handler); + void detachCompare5Interrupt(void); + void detachCompare8Interrupt(void); + #endif }; extern HardwareTimer Timer1; extern HardwareTimer Timer2; extern HardwareTimer Timer3; extern HardwareTimer Timer4; +#if NR_TIMERS >= 8 +extern HardwareTimer Timer5; +extern HardwareTimer Timer8; +#endif #endif diff --git a/wirish/boards.h b/wirish/boards.h index 6e24c51..035868a 100644 --- a/wirish/boards.h +++ b/wirish/boards.h @@ -39,26 +39,21 @@ extern "C"{ #endif -// Set of all possible digital pin names +// Set of all possible digital pin names; not all boards have all these enum { D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, - D32, D33, D34, D35, D36, D37, D38, D39, - // Maple Native only: - D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, - D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, - D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, - D85, D86, D87, D88, D89, D90, D91, D92, D93, D94, D95, D96, D97, D98, D99, - D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, -}; - -// Set of all possible analog pin names + D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, + D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, + D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, + D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90, D91, + D92, D93, D94, D95, D96, D97, D98, D99, D100, D101, D102, D103, D104, D105, + D106, D107, D108, D109, D110, D111, }; + +// Set of all possible analog pin names; not all boards have all these enum { ADC0, ADC1, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, ADC10, ADC11, - ADC12, ADC13, ADC14, ADC15, ADC16, - // Maple Native only: - ADC17, ADC18, ADC19, ADC20, -}; + ADC12, ADC13, ADC14, ADC15, ADC16, ADC17, ADC18, ADC19, ADC20, }; #define ADC_INVALID 0xFFFFFFFF #define TIMER_INVALID (TimerCCR)0xFFFFFFFF @@ -79,6 +74,8 @@ typedef struct ExtiInfo { // LeafLabs Maple rev3, rev4 #ifdef BOARD_maple + #define CYCLES_PER_MICROSECOND 72 + static PinMapping PIN_MAP[NR_GPIO_PINS] = { {GPIOA_BASE, 3, ADC3, TIMER2_CH4_CCR}, // D0/PA3 {GPIOA_BASE, 2, ADC2, TIMER2_CH3_CCR}, // D1/PA2 @@ -143,8 +140,76 @@ typedef struct ExtiInfo { #endif // LeafLabs Maple Native (prototype) -//#ifdef BOARD_maple-native -//#endif +#ifdef BOARD_maple_native + + #define CYCLES_PER_MICROSECOND 72 + + // TODO: + static PinMapping PIN_MAP[NR_GPIO_PINS] = { + {GPIOA_BASE, 3, ADC3, TIMER2_CH4_CCR}, // D0/PA3 + {GPIOA_BASE, 2, ADC2, TIMER2_CH3_CCR}, // D1/PA2 + {GPIOA_BASE, 0, ADC0, TIMER2_CH1_CCR}, // D2/PA0 + {GPIOA_BASE, 1, ADC1, TIMER2_CH2_CCR}, // D3/PA1 + {GPIOB_BASE, 5, ADC_INVALID, TIMER_INVALID}, // D4/PB5 + {GPIOB_BASE, 6, ADC_INVALID, TIMER4_CH1_CCR}, // D5/PB6 + {GPIOA_BASE, 8, ADC_INVALID, TIMER1_CH1_CCR}, // D6/PA8 + {GPIOA_BASE, 9, ADC_INVALID, TIMER1_CH2_CCR}, // D7/PA9 + {GPIOA_BASE, 10, ADC_INVALID, TIMER1_CH3_CCR}, // D8/PA10 + {GPIOB_BASE, 7, ADC_INVALID, TIMER4_CH2_CCR}, // D9/PB7 + {GPIOA_BASE, 4, ADC4, TIMER_INVALID}, // D10/PA4 + {GPIOA_BASE, 7, ADC7, TIMER3_CH2_CCR}, // D11/PA7 + {GPIOA_BASE, 6, ADC6, TIMER3_CH1_CCR}, // D12/PA6 + {GPIOA_BASE, 5, ADC5, TIMER_INVALID}, // D13/PA5 + {GPIOB_BASE, 8, ADC_INVALID, TIMER4_CH3_CCR}, // D14/PB8 + /* Little header */ + {GPIOC_BASE, 0, ADC10, TIMER_INVALID}, // D15/PC0 + {GPIOC_BASE, 1, ADC11, TIMER_INVALID}, // D16/PC1 + {GPIOC_BASE, 2, ADC12, TIMER_INVALID}, // D17/PC2 + {GPIOC_BASE, 3, ADC13, TIMER_INVALID}, // D18/PC3 + {GPIOC_BASE, 4, ADC14, TIMER_INVALID}, // D19/PC4 + {GPIOC_BASE, 5, ADC15, TIMER_INVALID}, // D20/PC5 + /* External header */ + {GPIOC_BASE, 13, ADC_INVALID, TIMER_INVALID}, // D21/PC13 + {GPIOC_BASE, 14, ADC_INVALID, TIMER_INVALID}, // D22/PC14 + {GPIOC_BASE, 15, ADC_INVALID, TIMER_INVALID}, // D23/PC15 + {GPIOB_BASE, 9, ADC_INVALID, TIMER4_CH4_CCR}, // D24/PB9 + {GPIOD_BASE, 2, ADC_INVALID, TIMER_INVALID}, // D25/PD2 + {GPIOC_BASE, 10, ADC_INVALID, TIMER_INVALID}, // D26/PC10 + {GPIOB_BASE, 0, ADC8, TIMER3_CH3_CCR}, // D27/PB0 + {GPIOB_BASE, 1, ADC9, TIMER3_CH4_CCR}, // D28/PB1 + {GPIOB_BASE, 10, ADC_INVALID, TIMER_INVALID}, // D29/PB10 + {GPIOB_BASE, 11, ADC_INVALID, TIMER_INVALID}, // D30/PB11 + {GPIOB_BASE, 12, ADC_INVALID, TIMER_INVALID}, // D31/PB12 + {GPIOB_BASE, 13, ADC_INVALID, TIMER_INVALID}, // D32/PB13 + {GPIOB_BASE, 14, ADC_INVALID, TIMER_INVALID}, // D33/PB14 + {GPIOB_BASE, 15, ADC_INVALID, TIMER_INVALID}, // D34/PB15 + {GPIOC_BASE, 6, ADC_INVALID, TIMER_INVALID}, // D35/PC6 + {GPIOC_BASE, 7, ADC_INVALID, TIMER_INVALID}, // D36/PC7 + {GPIOC_BASE, 8, ADC_INVALID, TIMER_INVALID}, // D37/PC8 + {GPIOC_BASE, 9, ADC_INVALID, TIMER_INVALID} // D38/PC9 (BUT) + }; + + static ExtiInfo PIN_TO_EXTI_CHANNEL[NR_GPIO_PINS] = { + {EXTI3, EXTI_CONFIG_PORTA}, // D0/PA3 + {EXTI2, EXTI_CONFIG_PORTA}, // D1/PA2 + {EXTI0, EXTI_CONFIG_PORTA}, // D2/PA0 + {EXTI1, EXTI_CONFIG_PORTA}, // D3/PA1 + {EXTI5, EXTI_CONFIG_PORTB}, // D4/PB5 + {EXTI6, EXTI_CONFIG_PORTB}, // D5/PB6 + {EXTI8, EXTI_CONFIG_PORTA}, // D6/PA8 + {EXTI9, EXTI_CONFIG_PORTA}, // D7/PA9 + {EXTI10, EXTI_CONFIG_PORTA}, // D8/PA10 + {EXTI7, EXTI_CONFIG_PORTB}, // D9/PB7 + {EXTI4, EXTI_CONFIG_PORTA}, // D10/PA4 + {EXTI7, EXTI_CONFIG_PORTA}, // D11/PA7 + {EXTI6, EXTI_CONFIG_PORTA}, // D12/PA6 + {EXTI5, EXTI_CONFIG_PORTA}, // D13/PA5 + }; +#endif + +#ifndef CYCLES_PER_MICROSECOND +#error Board type has not been selected correctly. +#endif #ifdef __cplusplus } // extern "C" diff --git a/wirish/comm/HardwareSerial.cpp b/wirish/comm/HardwareSerial.cpp index c1babff..6399ad5 100644 --- a/wirish/comm/HardwareSerial.cpp +++ b/wirish/comm/HardwareSerial.cpp @@ -37,6 +37,7 @@ HardwareSerial Serial1(USART1, 4500000UL, GPIOA_BASE, 9, 10, 1, 2); HardwareSerial Serial2(USART2, 2250000UL, GPIOA_BASE, 2, 3, 2, 3); HardwareSerial Serial3(USART3, 2250000UL, GPIOB_BASE, 10, 11, 0, 0); +// TODO: High density device ports HardwareSerial::HardwareSerial(uint8 usart_num, uint32 max_baud, diff --git a/wirish/comm/HardwareSerial.h b/wirish/comm/HardwareSerial.h index c2209ce..df8d7bf 100644 --- a/wirish/comm/HardwareSerial.h +++ b/wirish/comm/HardwareSerial.h @@ -61,5 +61,6 @@ class HardwareSerial : public Print { extern HardwareSerial Serial1; extern HardwareSerial Serial2; extern HardwareSerial Serial3; +// TODO: high density device ports #endif diff --git a/wirish/time.c b/wirish/time.c index c0fd03e..ea8ebe1 100644 --- a/wirish/time.c +++ b/wirish/time.c @@ -39,6 +39,7 @@ void delay(unsigned long ms) } void delayMicroseconds(uint32 us) { + // So (2^32)/12 micros max, or less than 6 minutes us *= 12; /* fudge for function call overhead */ diff --git a/wirish/time.h b/wirish/time.h index 45e82dc..33c04b4 100644 --- a/wirish/time.h +++ b/wirish/time.h @@ -35,10 +35,10 @@ extern "C"{ #include "nvic.h" #include "systick.h" +#include "boards.h" -#define CYCLES_PER_MICROSECOND 72 #define US_PER_MS 1000 -#define MAPLE_RELOAD_VAL 72000 +#define MAPLE_RELOAD_VAL (CYCLES_PER_MICROSECOND * US_PER_MS) extern volatile uint32 systick_timer_millis; diff --git a/wirish/wirish.c b/wirish/wirish.c index d439b23..69bd63b 100644 --- a/wirish/wirish.c +++ b/wirish/wirish.c @@ -56,9 +56,13 @@ void init(void) { systick_init(MAPLE_RELOAD_VAL); gpio_init(); adc_init(); - short i = 1; - for(i = 1; i <= NR_TIMERS; i++) { - timer_init(i, 1); - } + timer_init(1, 1); + timer_init(2, 1); + timer_init(3, 1); + timer_init(4, 1); + #if NR_TIMERS >= 8 + timer_init(5, 1); + timer_init(8, 1); + #endif setupUSB(); } diff --git a/wirish/wirish.h b/wirish/wirish.h index dd99e5c..7ede77c 100644 --- a/wirish/wirish.h +++ b/wirish/wirish.h @@ -33,10 +33,10 @@ #include "libmaple.h" #include "boards.h" +#include "time.h" #include "timers.h" #include "io.h" #include "bits.h" -#include "time.h" #include "pwm.h" #include "ext_interrupts.h" #include "wirish_math.h" diff --git a/wirish/wirish_analog.c b/wirish/wirish_analog.c index 2a8d662..1b911bc 100644 --- a/wirish/wirish_analog.c +++ b/wirish/wirish_analog.c @@ -33,8 +33,9 @@ /* Assumes that the ADC has been initialized and * that the pin is set to ANALOG_INPUT */ uint32 analogRead(uint8 pin) { - if (pin >= NR_ANALOG_PINS) + if(PIN_MAP[pin].adc == ADC_INVALID) { return 0; + } return adc_read(PIN_MAP[pin].adc); } -- cgit v1.2.3