From 526d51aa2b83c7a73a2ecdba8525d2a0847e5587 Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Tue, 15 Nov 2011 08:50:22 -0500 Subject: Tweak family-specific linker file layout. Move support/ld/stm32/f1/performance/vector_symbols.inc to support/ld/stm32/family/f1/performance/vector_symbols.inc Creating directory "family" under support/ld/stm32 will allow parallel directories (e.g. support/ld/stm32/mcu) to exist, which allows an eventual linker script cleanup to go much more smoothly. Signed-off-by: Marti Bolivar --- support/ld/stm32/f1/performance/vector_symbols.inc | 78 ---------------------- .../stm32/family/f1/performance/vector_symbols.inc | 78 ++++++++++++++++++++++ 2 files changed, 78 insertions(+), 78 deletions(-) delete mode 100644 support/ld/stm32/f1/performance/vector_symbols.inc create mode 100644 support/ld/stm32/family/f1/performance/vector_symbols.inc (limited to 'support/ld/stm32') diff --git a/support/ld/stm32/f1/performance/vector_symbols.inc b/support/ld/stm32/f1/performance/vector_symbols.inc deleted file mode 100644 index f8519bb..0000000 --- a/support/ld/stm32/f1/performance/vector_symbols.inc +++ /dev/null @@ -1,78 +0,0 @@ -EXTERN(__msp_init) -EXTERN(__exc_reset) -EXTERN(__exc_nmi) -EXTERN(__exc_hardfault) -EXTERN(__exc_memmanage) -EXTERN(__exc_busfault) -EXTERN(__exc_usagefault) -EXTERN(__stm32reservedexception7) -EXTERN(__stm32reservedexception8) -EXTERN(__stm32reservedexception9) -EXTERN(__stm32reservedexception10) -EXTERN(__exc_svc) -EXTERN(__exc_debug_monitor) -EXTERN(__stm32reservedexception13) -EXTERN(__exc_pendsv) -EXTERN(__exc_systick) - -EXTERN(__irq_wwdg) -EXTERN(__irq_pvd) -EXTERN(__irq_tamper) -EXTERN(__irq_rtc) -EXTERN(__irq_flash) -EXTERN(__irq_rcc) -EXTERN(__irq_exti0) -EXTERN(__irq_exti1) -EXTERN(__irq_exti2) -EXTERN(__irq_exti3) -EXTERN(__irq_exti4) -EXTERN(__irq_dma1_channel1) -EXTERN(__irq_dma1_channel2) -EXTERN(__irq_dma1_channel3) -EXTERN(__irq_dma1_channel4) -EXTERN(__irq_dma1_channel5) -EXTERN(__irq_dma1_channel6) -EXTERN(__irq_dma1_channel7) -EXTERN(__irq_adc) -EXTERN(__irq_usb_hp_can_tx) -EXTERN(__irq_usb_lp_can_rx0) -EXTERN(__irq_can_rx1) -EXTERN(__irq_can_sce) -EXTERN(__irq_exti9_5) -EXTERN(__irq_tim1_brk) -EXTERN(__irq_tim1_up) -EXTERN(__irq_tim1_trg_com) -EXTERN(__irq_tim1_cc) -EXTERN(__irq_tim2) -EXTERN(__irq_tim3) -EXTERN(__irq_tim4) -EXTERN(__irq_i2c1_ev) -EXTERN(__irq_i2c1_er) -EXTERN(__irq_i2c2_ev) -EXTERN(__irq_i2c2_er) -EXTERN(__irq_spi1) -EXTERN(__irq_spi2) -EXTERN(__irq_usart1) -EXTERN(__irq_usart2) -EXTERN(__irq_usart3) -EXTERN(__irq_exti15_10) -EXTERN(__irq_rtcalarm) -EXTERN(__irq_usbwakeup) - -EXTERN(__irq_tim8_brk) -EXTERN(__irq_tim8_up) -EXTERN(__irq_tim8_trg_com) -EXTERN(__irq_tim8_cc) -EXTERN(__irq_adc3) -EXTERN(__irq_fsmc) -EXTERN(__irq_sdio) -EXTERN(__irq_tim5) -EXTERN(__irq_spi3) -EXTERN(__irq_uart4) -EXTERN(__irq_uart5) -EXTERN(__irq_tim6) -EXTERN(__irq_tim7) -EXTERN(__irq_dma2_channel1) -EXTERN(__irq_dma2_channel2) -EXTERN(__irq_dma2_channel3) -EXTERN(__irq_dma2_channel4_5) diff --git a/support/ld/stm32/family/f1/performance/vector_symbols.inc b/support/ld/stm32/family/f1/performance/vector_symbols.inc new file mode 100644 index 0000000..f8519bb --- /dev/null +++ b/support/ld/stm32/family/f1/performance/vector_symbols.inc @@ -0,0 +1,78 @@ +EXTERN(__msp_init) +EXTERN(__exc_reset) +EXTERN(__exc_nmi) +EXTERN(__exc_hardfault) +EXTERN(__exc_memmanage) +EXTERN(__exc_busfault) +EXTERN(__exc_usagefault) +EXTERN(__stm32reservedexception7) +EXTERN(__stm32reservedexception8) +EXTERN(__stm32reservedexception9) +EXTERN(__stm32reservedexception10) +EXTERN(__exc_svc) +EXTERN(__exc_debug_monitor) +EXTERN(__stm32reservedexception13) +EXTERN(__exc_pendsv) +EXTERN(__exc_systick) + +EXTERN(__irq_wwdg) +EXTERN(__irq_pvd) +EXTERN(__irq_tamper) +EXTERN(__irq_rtc) +EXTERN(__irq_flash) +EXTERN(__irq_rcc) +EXTERN(__irq_exti0) +EXTERN(__irq_exti1) +EXTERN(__irq_exti2) +EXTERN(__irq_exti3) +EXTERN(__irq_exti4) +EXTERN(__irq_dma1_channel1) +EXTERN(__irq_dma1_channel2) +EXTERN(__irq_dma1_channel3) +EXTERN(__irq_dma1_channel4) +EXTERN(__irq_dma1_channel5) +EXTERN(__irq_dma1_channel6) +EXTERN(__irq_dma1_channel7) +EXTERN(__irq_adc) +EXTERN(__irq_usb_hp_can_tx) +EXTERN(__irq_usb_lp_can_rx0) +EXTERN(__irq_can_rx1) +EXTERN(__irq_can_sce) +EXTERN(__irq_exti9_5) +EXTERN(__irq_tim1_brk) +EXTERN(__irq_tim1_up) +EXTERN(__irq_tim1_trg_com) +EXTERN(__irq_tim1_cc) +EXTERN(__irq_tim2) +EXTERN(__irq_tim3) +EXTERN(__irq_tim4) +EXTERN(__irq_i2c1_ev) +EXTERN(__irq_i2c1_er) +EXTERN(__irq_i2c2_ev) +EXTERN(__irq_i2c2_er) +EXTERN(__irq_spi1) +EXTERN(__irq_spi2) +EXTERN(__irq_usart1) +EXTERN(__irq_usart2) +EXTERN(__irq_usart3) +EXTERN(__irq_exti15_10) +EXTERN(__irq_rtcalarm) +EXTERN(__irq_usbwakeup) + +EXTERN(__irq_tim8_brk) +EXTERN(__irq_tim8_up) +EXTERN(__irq_tim8_trg_com) +EXTERN(__irq_tim8_cc) +EXTERN(__irq_adc3) +EXTERN(__irq_fsmc) +EXTERN(__irq_sdio) +EXTERN(__irq_tim5) +EXTERN(__irq_spi3) +EXTERN(__irq_uart4) +EXTERN(__irq_uart5) +EXTERN(__irq_tim6) +EXTERN(__irq_tim7) +EXTERN(__irq_dma2_channel1) +EXTERN(__irq_dma2_channel2) +EXTERN(__irq_dma2_channel3) +EXTERN(__irq_dma2_channel4_5) -- cgit v1.2.3 From c2a937bbb56294df10eec082ab23c353edf4629b Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Tue, 29 Nov 2011 02:06:33 -0500 Subject: Great renaming: use "series" instead of "family". This is for greater consistency with the ST application notes, which refer to migrating "across" series (e.g. F1 to F2), but compatibility "within" a family (e.g. F1). So: - Move libmaple/stm32x/include/family to .../include/series/ and fix up includes appropriately. - Refer to "family" headers as "series" headers in comments. - Make similar "find and replace"-style changes to build system variable names and comments. - Move support/ld/stm32/family to .../stm32/series. Signed-off-by: Marti Bolivar --- Makefile | 4 +- libmaple/include/libmaple/flash.h | 4 +- libmaple/include/libmaple/gpio.h | 6 +- libmaple/include/libmaple/nvic.h | 10 +- libmaple/include/libmaple/rcc.h | 6 +- libmaple/include/libmaple/stm32.h | 6 +- libmaple/rules.mk | 2 +- libmaple/stm32f1/include/family/flash.h | 142 ------ libmaple/stm32f1/include/family/gpio.h | 479 ------------------ libmaple/stm32f1/include/family/nvic.h | 139 ------ libmaple/stm32f1/include/family/rcc.h | 553 --------------------- libmaple/stm32f1/include/family/stm32.h | 100 ---- libmaple/stm32f1/include/series/flash.h | 142 ++++++ libmaple/stm32f1/include/series/gpio.h | 479 ++++++++++++++++++ libmaple/stm32f1/include/series/nvic.h | 139 ++++++ libmaple/stm32f1/include/series/rcc.h | 553 +++++++++++++++++++++ libmaple/stm32f1/include/series/stm32.h | 100 ++++ .../stm32/family/f1/performance/vector_symbols.inc | 78 --- .../stm32/series/f1/performance/vector_symbols.inc | 78 +++ support/make/target-config.mk | 6 +- 20 files changed, 1513 insertions(+), 1513 deletions(-) delete mode 100644 libmaple/stm32f1/include/family/flash.h delete mode 100644 libmaple/stm32f1/include/family/gpio.h delete mode 100644 libmaple/stm32f1/include/family/nvic.h delete mode 100644 libmaple/stm32f1/include/family/rcc.h delete mode 100644 libmaple/stm32f1/include/family/stm32.h create mode 100644 libmaple/stm32f1/include/series/flash.h create mode 100644 libmaple/stm32f1/include/series/gpio.h create mode 100644 libmaple/stm32f1/include/series/nvic.h create mode 100644 libmaple/stm32f1/include/series/rcc.h create mode 100644 libmaple/stm32f1/include/series/stm32.h delete mode 100644 support/ld/stm32/family/f1/performance/vector_symbols.inc create mode 100644 support/ld/stm32/series/f1/performance/vector_symbols.inc (limited to 'support/ld/stm32') diff --git a/Makefile b/Makefile index 2525c2e..1e00ed6 100644 --- a/Makefile +++ b/Makefile @@ -55,7 +55,7 @@ GLOBAL_CXXFLAGS := -fno-rtti -fno-exceptions -Wall $(TARGET_FLAGS) GLOBAL_ASFLAGS := -mcpu=cortex-m3 -march=armv7-m -mthumb \ -x assembler-with-cpp $(TARGET_FLAGS) LDFLAGS = -T$(LDDIR)/$(LDSCRIPT) -L$(LDDIR) \ - -mcpu=cortex-m3 -mthumb -Xlinker -L $(LD_FAMILY_PATH) \ + -mcpu=cortex-m3 -mthumb -Xlinker -L $(LD_SERIES_PATH) \ --gc-sections --print-gc-sections --march=armv7-m -Wall ## @@ -76,7 +76,7 @@ else LIBMAPLE_MODULES += $(SRCROOT)/libmaple endif LIBMAPLE_MODULES += $(SRCROOT)/libmaple/usb # USB FS device -LIBMAPLE_MODULES += $(LIBMAPLE_MODULE_FAMILY) # family submodule in libmaple +LIBMAPLE_MODULES += $(LIBMAPLE_MODULE_SERIES) # STM32 series submodule in libmaple LIBMAPLE_MODULES += $(SRCROOT)/wirish # Official libraries: LIBMAPLE_MODULES += $(SRCROOT)/libraries/Servo diff --git a/libmaple/include/libmaple/flash.h b/libmaple/include/libmaple/flash.h index 66d5b8e..97bfa26 100644 --- a/libmaple/include/libmaple/flash.h +++ b/libmaple/include/libmaple/flash.h @@ -47,10 +47,10 @@ extern "C"{ #define FLASH_WAIT_STATE_6 0x6 #define FLASH_WAIT_STATE_7 0x7 -/* The family header must define FLASH_SAFE_WAIT_STATES, the smallest +/* The series header must define FLASH_SAFE_WAIT_STATES, the smallest * number of wait states that it is safe to use when the MCU clock is * at its fastest rate (not considering overclocking). */ -#include +#include /* * Setup routines diff --git a/libmaple/include/libmaple/gpio.h b/libmaple/include/libmaple/gpio.h index e821ad4..609320f 100644 --- a/libmaple/include/libmaple/gpio.h +++ b/libmaple/include/libmaple/gpio.h @@ -37,11 +37,11 @@ extern "C"{ #endif /* - * Note: Family header must define: - * - struct gpio_dev (and declare extern pointers to family-provided ones) + * Note: Series header must define: + * - struct gpio_dev (and declare extern pointers to series-provided ones) * - enum gpio_pin_mode (TODO think hard on this) */ -#include +#include #include /* diff --git a/libmaple/include/libmaple/nvic.h b/libmaple/include/libmaple/nvic.h index 23425df..1a1a4ed 100644 --- a/libmaple/include/libmaple/nvic.h +++ b/libmaple/include/libmaple/nvic.h @@ -74,18 +74,18 @@ typedef struct nvic_reg_map { #define NVIC_BASE ((struct nvic_reg_map*)0xE000E100) /* - * Note: The family header must define enum nvic_irq_num, which gives + * Note: The series header must define enum nvic_irq_num, which gives * descriptive names to the interrupts and exceptions from NMI (-14) - * to the largest interrupt available in the family, where the value + * to the largest interrupt available in the series, where the value * for nonnegative enumerators corresponds to its position in the * vector table. * * It also must define a static inline nvic_irq_disable_all(), which - * writes 0xFFFFFFFF to all ICE registers available in the family. (We - * place the include here to give the family header access to + * writes 0xFFFFFFFF to all ICE registers available in the series. (We + * place the include here to give the series header access to * NVIC_BASE, in order to let it do so). */ -#include +#include void nvic_init(uint32 address, uint32 offset); void nvic_set_vector_table(uint32 address, uint32 offset); diff --git a/libmaple/include/libmaple/rcc.h b/libmaple/include/libmaple/rcc.h index a4b66e5..08f7c7e 100644 --- a/libmaple/include/libmaple/rcc.h +++ b/libmaple/include/libmaple/rcc.h @@ -37,9 +37,9 @@ extern "C"{ #endif #include -#include +#include -/* Note: Beyond the usual (registers, etc.), it's up to the family +/* Note: Beyond the usual (registers, etc.), it's up to the series * header to define the following types: * * - rcc_pllsrc: For each PLL source (passed to rcc_clk_init()). @@ -49,7 +49,7 @@ extern "C"{ * - rcc_clk_id: For each available peripheral. These are widely used * as unique IDs (TODO extricate from RCC?). Peripherals which are * common across families should use the same token for their - * rcc_clk_id in each family header. + * rcc_clk_id in each series header. * * - rcc_clk_domain: For each clock domain (returned by rcc_dev_clk()). * diff --git a/libmaple/include/libmaple/stm32.h b/libmaple/include/libmaple/stm32.h index 5efb670..356a360 100644 --- a/libmaple/include/libmaple/stm32.h +++ b/libmaple/include/libmaple/stm32.h @@ -37,8 +37,8 @@ extern "C" { #endif /* Everything enclosed in the following __DOXYGEN_PREDEFINED_HACK - * conditional block must be defined in the family header. */ -#include + * conditional block must be defined in the series header. */ +#include #ifdef __DOXYGEN_PREDEFINED_HACK @@ -66,7 +66,7 @@ extern "C" { #define PCLK2 /* - * Family- and MCU-specific values. + * Series- and MCU-specific values. */ /** diff --git a/libmaple/rules.mk b/libmaple/rules.mk index 3ca5b3a..f0776a7 100644 --- a/libmaple/rules.mk +++ b/libmaple/rules.mk @@ -4,7 +4,7 @@ dirstack_$(sp) := $(d) d := $(dir) BUILDDIRS += $(BUILD_PATH)/$(d) -LIBMAPLE_INCLUDES := -I$(LIBMAPLE_PATH)/include -I$(LIBMAPLE_MODULE_FAMILY)/include +LIBMAPLE_INCLUDES := -I$(LIBMAPLE_PATH)/include -I$(LIBMAPLE_MODULE_SERIES)/include LIBMAPLE_PRIVATE_INCLUDES := -I$(LIBMAPLE_PATH) # Local flags diff --git a/libmaple/stm32f1/include/family/flash.h b/libmaple/stm32f1/include/family/flash.h deleted file mode 100644 index 918a434..0000000 --- a/libmaple/stm32f1/include/family/flash.h +++ /dev/null @@ -1,142 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2010 Perry Hung. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @file libmaple/stm32f1/flash.h - * @brief STM32F1 Flash header. - * - * Provides register map, base pointer, and register bit definitions - * for the Flash controller on the STM32F1 line, along with - * family-specific configuration values. - */ - -#ifndef _LIBMAPLE_STM32F1_FLASH_H_ -#define _LIBMAPLE_STM32F1_FLASH_H_ - -#ifdef __cplusplus -extern "C"{ -#endif - -#include - -/* - * Register map - */ - -/** Flash register map type */ -typedef struct flash_reg_map { - __io uint32 ACR; /**< Access control register */ - __io uint32 KEYR; /**< Key register */ - __io uint32 OPTKEYR; /**< OPTKEY register */ - __io uint32 SR; /**< Status register */ - __io uint32 CR; /**< Control register */ - __io uint32 AR; /**< Address register */ - __io uint32 OBR; /**< Option byte register */ - __io uint32 WRPR; /**< Write protection register */ -} flash_reg_map; - -/** Flash register map base pointer */ -#define FLASH_BASE ((struct flash_reg_map*)0x40022000) - -/* - * Register bit definitions - */ - -/* Access control register */ - -#define FLASH_ACR_PRFTBS_BIT 5 -#define FLASH_ACR_PRFTBE_BIT 4 -#define FLASH_ACR_HLFCYA_BIT 3 - -#define FLASH_ACR_PRFTBS BIT(FLASH_ACR_PRFTBS_BIT) -#define FLASH_ACR_PRFTBE BIT(FLASH_ACR_PRFTBE_BIT) -#define FLASH_ACR_HLFCYA BIT(FLASH_ACR_HLFCYA_BIT) -#define FLASH_ACR_LATENCY 0x7 - -/* Status register */ - -#define FLASH_SR_EOP_BIT 5 -#define FLASH_SR_WRPRTERR_BIT 4 -#define FLASH_SR_PGERR_BIT 2 -#define FLASH_SR_BSY_BIT 0 - -#define FLASH_SR_EOP BIT(FLASH_SR_EOP_BIT) -#define FLASH_SR_WRPRTERR BIT(FLASH_SR_WRPRTERR_BIT) -#define FLASH_SR_PGERR BIT(FLASH_SR_PGERR_BIT) -#define FLASH_SR_BSY BIT(FLASH_SR_BSY_BIT) - -/* Control register */ - -#define FLASH_CR_EOPIE_BIT 12 -#define FLASH_CR_ERRIE_BIT 10 -#define FLASH_CR_OPTWRE_BIT 9 -#define FLASH_CR_LOCK_BIT 7 -#define FLASH_CR_STRT_BIT 6 -#define FLASH_CR_OPTER_BIT 5 -#define FLASH_CR_OPTPG_BIT 4 -#define FLASH_CR_MER_BIT 2 -#define FLASH_CR_PER_BIT 1 -#define FLASH_CR_PG_BIT 0 - -#define FLASH_CR_EOPIE BIT(FLASH_CR_EOPIE_BIT) -#define FLASH_CR_ERRIE BIT(FLASH_CR_ERRIE_BIT) -#define FLASH_CR_OPTWRE BIT(FLASH_CR_OPTWRE_BIT) -#define FLASH_CR_LOCK BIT(FLASH_CR_LOCK_BIT) -#define FLASH_CR_STRT BIT(FLASH_CR_STRT_BIT) -#define FLASH_CR_OPTER BIT(FLASH_CR_OPTER_BIT) -#define FLASH_CR_OPTPG BIT(FLASH_CR_OPTPG_BIT) -#define FLASH_CR_MER BIT(FLASH_CR_MER_BIT) -#define FLASH_CR_PER BIT(FLASH_CR_PER_BIT) -#define FLASH_CR_PG BIT(FLASH_CR_PG_BIT) - -/* Option byte register */ - -#define FLASH_OBR_nRST_STDBY_BIT 4 -#define FLASH_OBR_nRST_STOP_BIT 3 -#define FLASH_OBR_WDG_SW_BIT 2 -#define FLASH_OBR_RDPRT_BIT 1 -#define FLASH_OBR_OPTERR_BIT 0 - -#define FLASH_OBR_DATA1 (0xFF << 18) -#define FLASH_OBR_DATA0 (0xFF << 10) -#define FLASH_OBR_USER 0x3FF -#define FLASH_OBR_nRST_STDBY BIT(FLASH_OBR_nRST_STDBY_BIT) -#define FLASH_OBR_nRST_STOP BIT(FLASH_OBR_nRST_STOP_BIT) -#define FLASH_OBR_WDG_SW BIT(FLASH_OBR_WDG_SW_BIT) -#define FLASH_OBR_RDPRT BIT(FLASH_OBR_RDPRT_BIT) -#define FLASH_OBR_OPTERR BIT(FLASH_OBR_OPTERR_BIT) - -/* - * Family-specific configuration values. - */ - -#define FLASH_SAFE_WAIT_STATES FLASH_WAIT_STATE_2 - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/libmaple/stm32f1/include/family/gpio.h b/libmaple/stm32f1/include/family/gpio.h deleted file mode 100644 index c10244d..0000000 --- a/libmaple/stm32f1/include/family/gpio.h +++ /dev/null @@ -1,479 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2010 Perry Hung. - * Copyright (c) 2011 LeafLabs, LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. -*****************************************************************************/ - -/** - * @file libmaple/stm32f1/gpio.h - * @brief General purpose I/O (GPIO) and Alternate Function I/O - * (AFIO) prototypes, defines, and inlined access functions. - */ - -#ifndef _LIBMAPLE_STM32F1_GPIO_H_ -#define _LIBMAPLE_STM32F1_GPIO_H_ - -#ifdef __cplusplus -extern "C"{ -#endif - -#include -#include - -/* - * GPIO register maps and devices - */ - -/** GPIO register map type */ -typedef struct gpio_reg_map { - __io uint32 CRL; /**< Port configuration register low */ - __io uint32 CRH; /**< Port configuration register high */ - __io uint32 IDR; /**< Port input data register */ - __io uint32 ODR; /**< Port output data register */ - __io uint32 BSRR; /**< Port bit set/reset register */ - __io uint32 BRR; /**< Port bit reset register */ - __io uint32 LCKR; /**< Port configuration lock register */ -} gpio_reg_map; - -/** - * @brief External interrupt line port selector. - * - * Used to determine which GPIO port to map an external interrupt line - * onto. */ -/* (See AFIO sections, below) */ -typedef enum afio_exti_port { - AFIO_EXTI_PA, /**< Use port A (PAx) pin. */ - AFIO_EXTI_PB, /**< Use port B (PBx) pin. */ - AFIO_EXTI_PC, /**< Use port C (PCx) pin. */ - AFIO_EXTI_PD, /**< Use port D (PDx) pin. */ -#ifdef STM32_HIGH_DENSITY - AFIO_EXTI_PE, /**< Use port E (PEx) pin. */ - AFIO_EXTI_PF, /**< Use port F (PFx) pin. */ - AFIO_EXTI_PG, /**< Use port G (PGx) pin. */ -#endif -} afio_exti_port; - -/** GPIO device type */ -typedef struct gpio_dev { - gpio_reg_map *regs; /**< Register map */ - rcc_clk_id clk_id; /**< RCC clock information */ - afio_exti_port exti_port; /**< AFIO external interrupt port value */ -} gpio_dev; - -extern gpio_dev gpioa; -extern gpio_dev* const GPIOA; -extern gpio_dev gpiob; -extern gpio_dev* const GPIOB; -extern gpio_dev gpioc; -extern gpio_dev* const GPIOC; -extern gpio_dev gpiod; -extern gpio_dev* const GPIOD; -#ifdef STM32_HIGH_DENSITY -extern gpio_dev gpioe; -extern gpio_dev* const GPIOE; -extern gpio_dev gpiof; -extern gpio_dev* const GPIOF; -extern gpio_dev gpiog; -extern gpio_dev* const GPIOG; -#endif - -/** GPIO port A register map base pointer */ -#define GPIOA_BASE ((struct gpio_reg_map*)0x40010800) -/** GPIO port B register map base pointer */ -#define GPIOB_BASE ((struct gpio_reg_map*)0x40010C00) -/** GPIO port C register map base pointer */ -#define GPIOC_BASE ((struct gpio_reg_map*)0x40011000) -/** GPIO port D register map base pointer */ -#define GPIOD_BASE ((struct gpio_reg_map*)0x40011400) -#ifdef STM32_HIGH_DENSITY -/** GPIO port E register map base pointer */ -#define GPIOE_BASE ((struct gpio_reg_map*)0x40011800) -/** GPIO port F register map base pointer */ -#define GPIOF_BASE ((struct gpio_reg_map*)0x40011C00) -/** GPIO port G register map base pointer */ -#define GPIOG_BASE ((struct gpio_reg_map*)0x40012000) -#endif - -/* - * GPIO register bit definitions - */ - -/* Control registers, low and high */ - -#define GPIO_CR_CNF (0x3 << 2) -#define GPIO_CR_CNF_INPUT_ANALOG (0x0 << 2) -#define GPIO_CR_CNF_INPUT_FLOATING (0x1 << 2) -#define GPIO_CR_CNF_INPUT_PU_PD (0x2 << 2) -#define GPIO_CR_CNF_OUTPUT_PP (0x0 << 2) -#define GPIO_CR_CNF_OUTPUT_OD (0x1 << 2) -#define GPIO_CR_CNF_AF_OUTPUT_PP (0x2 << 2) -#define GPIO_CR_CNF_AF_OUTPUT_OD (0x3 << 2) -#define GPIO_CR_MODE 0x3 -#define GPIO_CR_MODE_INPUT 0x0 -#define GPIO_CR_MODE_OUTPUT_10MHZ 0x1 -#define GPIO_CR_MODE_OUTPUT_2MHZ 0x2 -#define GPIO_CR_MODE_OUTPUT_50MHZ 0x3 - -/** - * @brief GPIO Pin modes. - * - * These only allow for 50MHZ max output speeds; if you want slower, - * use direct register access. - */ -typedef enum gpio_pin_mode { - GPIO_OUTPUT_PP = (GPIO_CR_CNF_OUTPUT_PP | - GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output push-pull. */ - GPIO_OUTPUT_OD = (GPIO_CR_CNF_OUTPUT_OD | - GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output open-drain. */ - GPIO_AF_OUTPUT_PP = (GPIO_CR_CNF_AF_OUTPUT_PP | - GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function - output push-pull. */ - GPIO_AF_OUTPUT_OD = (GPIO_CR_CNF_AF_OUTPUT_OD | - GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function - output open drain. */ - GPIO_INPUT_ANALOG = (GPIO_CR_CNF_INPUT_ANALOG | - GPIO_CR_MODE_INPUT), /**< Analog input. */ - GPIO_INPUT_FLOATING = (GPIO_CR_CNF_INPUT_FLOATING | - GPIO_CR_MODE_INPUT), /**< Input floating. */ - GPIO_INPUT_PD = (GPIO_CR_CNF_INPUT_PU_PD | - GPIO_CR_MODE_INPUT), /**< Input pull-down. */ - GPIO_INPUT_PU /**< Input pull-up. */ - /* GPIO_INPUT_PU treated as a special case, for ODR twiddling */ -} gpio_pin_mode; - -/** - * @brief Get a GPIO port's corresponding afio_exti_port. - * @param dev GPIO device whose afio_exti_port to return. - */ -static inline afio_exti_port gpio_exti_port(gpio_dev *dev) { - return dev->exti_port; -} - -/* - * AFIO register map - */ - -/** AFIO register map */ -typedef struct afio_reg_map { - __io uint32 EVCR; /**< Event control register. */ - __io uint32 MAPR; /**< AF remap and debug I/O configuration - register. */ - __io uint32 EXTICR1; /**< External interrupt configuration - register 1. */ - __io uint32 EXTICR2; /**< External interrupt configuration - register 2. */ - __io uint32 EXTICR3; /**< External interrupt configuration - register 3. */ - __io uint32 EXTICR4; /**< External interrupt configuration - register 4. */ - __io uint32 MAPR2; /**< AF remap and debug I/O configuration - register 2. */ -} afio_reg_map; - -/** AFIO register map base pointer. */ -#define AFIO_BASE ((struct afio_reg_map *)0x40010000) - -/* - * AFIO register bit definitions - */ - -/* Event control register */ - -#define AFIO_EVCR_EVOE (0x1 << 7) -#define AFIO_EVCR_PORT_PA (0x0 << 4) -#define AFIO_EVCR_PORT_PB (0x1 << 4) -#define AFIO_EVCR_PORT_PC (0x2 << 4) -#define AFIO_EVCR_PORT_PD (0x3 << 4) -#define AFIO_EVCR_PORT_PE (0x4 << 4) -#define AFIO_EVCR_PIN_0 0x0 -#define AFIO_EVCR_PIN_1 0x1 -#define AFIO_EVCR_PIN_2 0x2 -#define AFIO_EVCR_PIN_3 0x3 -#define AFIO_EVCR_PIN_4 0x4 -#define AFIO_EVCR_PIN_5 0x5 -#define AFIO_EVCR_PIN_6 0x6 -#define AFIO_EVCR_PIN_7 0x7 -#define AFIO_EVCR_PIN_8 0x8 -#define AFIO_EVCR_PIN_9 0x9 -#define AFIO_EVCR_PIN_10 0xA -#define AFIO_EVCR_PIN_11 0xB -#define AFIO_EVCR_PIN_12 0xC -#define AFIO_EVCR_PIN_13 0xD -#define AFIO_EVCR_PIN_14 0xE -#define AFIO_EVCR_PIN_15 0xF - -/* AF remap and debug I/O configuration register */ - -#define AFIO_MAPR_SWJ_CFG (0x7 << 24) -#define AFIO_MAPR_SWJ_CFG_FULL_SWJ (0x0 << 24) -#define AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST (0x1 << 24) -#define AFIO_MAPR_SWJ_CFG_NO_JTAG_SW (0x2 << 24) -#define AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW (0x4 << 24) -#define AFIO_MAPR_ADC2_ETRGREG_REMAP BIT(20) -#define AFIO_MAPR_ADC2_ETRGINJ_REMAP BIT(19) -#define AFIO_MAPR_ADC1_ETRGREG_REMAP BIT(18) -#define AFIO_MAPR_ADC1_ETRGINJ_REMAP BIT(17) -#define AFIO_MAPR_TIM5CH4_IREMAP BIT(16) -#define AFIO_MAPR_PD01_REMAP BIT(15) -#define AFIO_MAPR_CAN_REMAP (0x3 << 13) -#define AFIO_MAPR_CAN_REMAP_NONE (0x0 << 13) -#define AFIO_MAPR_CAN_REMAP_PB8_PB9 (0x2 << 13) -#define AFIO_MAPR_CAN_REMAP_PD0_PD1 (0x3 << 13) -#define AFIO_MAPR_TIM4_REMAP BIT(12) -#define AFIO_MAPR_TIM3_REMAP (0x3 << 10) -#define AFIO_MAPR_TIM3_REMAP_NONE (0x0 << 10) -#define AFIO_MAPR_TIM3_REMAP_PARTIAL (0x2 << 10) -#define AFIO_MAPR_TIM3_REMAP_FULL (0x3 << 10) -#define AFIO_MAPR_TIM2_REMAP (0x3 << 8) -#define AFIO_MAPR_TIM2_REMAP_NONE (0x0 << 8) -#define AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3 (0x1 << 8) -#define AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11 (0x2 << 8) -#define AFIO_MAPR_TIM2_REMAP_FULL (0x3 << 8) -#define AFIO_MAPR_TIM1_REMAP (0x3 << 6) -#define AFIO_MAPR_TIM1_REMAP_NONE (0x0 << 6) -#define AFIO_MAPR_TIM1_REMAP_PARTIAL (0x1 << 6) -#define AFIO_MAPR_TIM1_REMAP_FULL (0x3 << 6) -#define AFIO_MAPR_USART3_REMAP (0x3 << 4) -#define AFIO_MAPR_USART3_REMAP_NONE (0x0 << 4) -#define AFIO_MAPR_USART3_REMAP_PARTIAL (0x1 << 4) -#define AFIO_MAPR_USART3_REMAP_FULL (0x3 << 4) -#define AFIO_MAPR_USART2_REMAP BIT(3) -#define AFIO_MAPR_USART1_REMAP BIT(2) -#define AFIO_MAPR_I2C1_REMAP BIT(1) -#define AFIO_MAPR_SPI1_REMAP BIT(0) - -/* External interrupt configuration register 1 */ - -#define AFIO_EXTICR1_EXTI3 (0xF << 12) -#define AFIO_EXTICR1_EXTI3_PA (0x0 << 12) -#define AFIO_EXTICR1_EXTI3_PB (0x1 << 12) -#define AFIO_EXTICR1_EXTI3_PC (0x2 << 12) -#define AFIO_EXTICR1_EXTI3_PD (0x3 << 12) -#define AFIO_EXTICR1_EXTI3_PE (0x4 << 12) -#define AFIO_EXTICR1_EXTI3_PF (0x5 << 12) -#define AFIO_EXTICR1_EXTI3_PG (0x6 << 12) -#define AFIO_EXTICR1_EXTI2 (0xF << 8) -#define AFIO_EXTICR1_EXTI2_PA (0x0 << 8) -#define AFIO_EXTICR1_EXTI2_PB (0x1 << 8) -#define AFIO_EXTICR1_EXTI2_PC (0x2 << 8) -#define AFIO_EXTICR1_EXTI2_PD (0x3 << 8) -#define AFIO_EXTICR1_EXTI2_PE (0x4 << 8) -#define AFIO_EXTICR1_EXTI2_PF (0x5 << 8) -#define AFIO_EXTICR1_EXTI2_PG (0x6 << 8) -#define AFIO_EXTICR1_EXTI1 (0xF << 4) -#define AFIO_EXTICR1_EXTI1_PA (0x0 << 4) -#define AFIO_EXTICR1_EXTI1_PB (0x1 << 4) -#define AFIO_EXTICR1_EXTI1_PC (0x2 << 4) -#define AFIO_EXTICR1_EXTI1_PD (0x3 << 4) -#define AFIO_EXTICR1_EXTI1_PE (0x4 << 4) -#define AFIO_EXTICR1_EXTI1_PF (0x5 << 4) -#define AFIO_EXTICR1_EXTI1_PG (0x6 << 4) -#define AFIO_EXTICR1_EXTI0 0xF -#define AFIO_EXTICR1_EXTI0_PA 0x0 -#define AFIO_EXTICR1_EXTI0_PB 0x1 -#define AFIO_EXTICR1_EXTI0_PC 0x2 -#define AFIO_EXTICR1_EXTI0_PD 0x3 -#define AFIO_EXTICR1_EXTI0_PE 0x4 -#define AFIO_EXTICR1_EXTI0_PF 0x5 -#define AFIO_EXTICR1_EXTI0_PG 0x6 - -/* External interrupt configuration register 2 */ - -#define AFIO_EXTICR2_EXTI7 (0xF << 12) -#define AFIO_EXTICR2_EXTI7_PA (0x0 << 12) -#define AFIO_EXTICR2_EXTI7_PB (0x1 << 12) -#define AFIO_EXTICR2_EXTI7_PC (0x2 << 12) -#define AFIO_EXTICR2_EXTI7_PD (0x3 << 12) -#define AFIO_EXTICR2_EXTI7_PE (0x4 << 12) -#define AFIO_EXTICR2_EXTI7_PF (0x5 << 12) -#define AFIO_EXTICR2_EXTI7_PG (0x6 << 12) -#define AFIO_EXTICR2_EXTI6 (0xF << 8) -#define AFIO_EXTICR2_EXTI6_PA (0x0 << 8) -#define AFIO_EXTICR2_EXTI6_PB (0x1 << 8) -#define AFIO_EXTICR2_EXTI6_PC (0x2 << 8) -#define AFIO_EXTICR2_EXTI6_PD (0x3 << 8) -#define AFIO_EXTICR2_EXTI6_PE (0x4 << 8) -#define AFIO_EXTICR2_EXTI6_PF (0x5 << 8) -#define AFIO_EXTICR2_EXTI6_PG (0x6 << 8) -#define AFIO_EXTICR2_EXTI5 (0xF << 4) -#define AFIO_EXTICR2_EXTI5_PA (0x0 << 4) -#define AFIO_EXTICR2_EXTI5_PB (0x1 << 4) -#define AFIO_EXTICR2_EXTI5_PC (0x2 << 4) -#define AFIO_EXTICR2_EXTI5_PD (0x3 << 4) -#define AFIO_EXTICR2_EXTI5_PE (0x4 << 4) -#define AFIO_EXTICR2_EXTI5_PF (0x5 << 4) -#define AFIO_EXTICR2_EXTI5_PG (0x6 << 4) -#define AFIO_EXTICR2_EXTI4 0xF -#define AFIO_EXTICR2_EXTI4_PA 0x0 -#define AFIO_EXTICR2_EXTI4_PB 0x1 -#define AFIO_EXTICR2_EXTI4_PC 0x2 -#define AFIO_EXTICR2_EXTI4_PD 0x3 -#define AFIO_EXTICR2_EXTI4_PE 0x4 -#define AFIO_EXTICR2_EXTI4_PF 0x5 -#define AFIO_EXTICR2_EXTI4_PG 0x6 - -/* AF remap and debug I/O configuration register 2 */ - -#define AFIO_MAPR2_FSMC_NADV BIT(10) -#define AFIO_MAPR2_TIM14_REMAP BIT(9) -#define AFIO_MAPR2_TIM13_REMAP BIT(8) -#define AFIO_MAPR2_TIM11_REMAP BIT(7) -#define AFIO_MAPR2_TIM10_REMAP BIT(6) -#define AFIO_MAPR2_TIM9_REMAP BIT(5) - -/* - * AFIO convenience routines - */ - -void afio_init(void); - -/** - * External interrupt line numbers. - */ -typedef enum afio_exti_num { - AFIO_EXTI_0, /**< External interrupt line 0. */ - AFIO_EXTI_1, /**< External interrupt line 1. */ - AFIO_EXTI_2, /**< External interrupt line 2. */ - AFIO_EXTI_3, /**< External interrupt line 3. */ - AFIO_EXTI_4, /**< External interrupt line 4. */ - AFIO_EXTI_5, /**< External interrupt line 5. */ - AFIO_EXTI_6, /**< External interrupt line 6. */ - AFIO_EXTI_7, /**< External interrupt line 7. */ - AFIO_EXTI_8, /**< External interrupt line 8. */ - AFIO_EXTI_9, /**< External interrupt line 9. */ - AFIO_EXTI_10, /**< External interrupt line 10. */ - AFIO_EXTI_11, /**< External interrupt line 11. */ - AFIO_EXTI_12, /**< External interrupt line 12. */ - AFIO_EXTI_13, /**< External interrupt line 13. */ - AFIO_EXTI_14, /**< External interrupt line 14. */ - AFIO_EXTI_15, /**< External interrupt line 15. */ -} afio_exti_num; - -void afio_exti_select(afio_exti_num exti, afio_exti_port gpio_port); - -/* HACK: Use upper bit to denote MAPR2, Bit 31 is reserved and - * not used in either MAPR or MAPR2 */ -#define AFIO_REMAP_USE_MAPR2 (1 << 31) - -/** - * @brief Available peripheral remaps. - * @see afio_remap() - */ -typedef enum afio_remap_peripheral { - AFIO_REMAP_ADC2_ETRGREG = AFIO_MAPR_ADC2_ETRGREG_REMAP, /**< - ADC 2 external trigger regular conversion remapping */ - AFIO_REMAP_ADC2_ETRGINJ = AFIO_MAPR_ADC2_ETRGINJ_REMAP, /**< - ADC 2 external trigger injected conversion remapping */ - AFIO_REMAP_ADC1_ETRGREG = AFIO_MAPR_ADC1_ETRGREG_REMAP, /**< - ADC 1 external trigger regular conversion remapping */ - AFIO_REMAP_ADC1_ETRGINJ = AFIO_MAPR_ADC1_ETRGINJ_REMAP, /**< - ADC 1 external trigger injected conversion remapping */ - AFIO_REMAP_TIM5CH4_I = AFIO_MAPR_TIM5CH4_IREMAP, /**< - Timer 5 channel 4 internal remapping */ - AFIO_REMAP_PD01 = AFIO_MAPR_PD01_REMAP, /**< - Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ - AFIO_REMAP_CAN_1 = AFIO_MAPR_CAN_REMAP_PB8_PB9, /**< - CAN alternate function remapping 1 (RX on PB8, TX on PB9) */ - AFIO_REMAP_CAN_2 = AFIO_MAPR_CAN_REMAP_PD0_PD1, /**< - CAN alternate function remapping 2 (RX on PD0, TX on PD1) */ - AFIO_REMAP_TIM4 = AFIO_MAPR_TIM4_REMAP, /**< - Timer 4 remapping */ - AFIO_REMAP_TIM3_PARTIAL = AFIO_MAPR_TIM3_REMAP_PARTIAL, /**< - Timer 3 partial remapping */ - AFIO_REMAP_TIM3_FULL = AFIO_MAPR_TIM3_REMAP_FULL, /**< - Timer 3 full remapping */ - AFIO_REMAP_TIM2_PARTIAL_1 = AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3, /**< - Timer 2 partial remapping 1 (CH1 and ETR on PA15, CH2 on PB3, CH3 - on PA2, CH4 on PA3) */ - AFIO_REMAP_TIM2_PARTIAL_2 = AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11, /**< - Timer 2 partial remapping 2 (CH1 and ETR on PA0, CH2 on PA1, CH3 - on PB10, CH4 on PB11) */ - AFIO_REMAP_TIM2_FULL = AFIO_MAPR_TIM2_REMAP_FULL, /**< - Timer 2 full remapping */ - AFIO_REMAP_USART2 = AFIO_MAPR_USART2_REMAP, /**< - USART 2 remapping */ - AFIO_REMAP_USART1 = AFIO_MAPR_USART1_REMAP, /**< - USART 1 remapping */ - AFIO_REMAP_I2C1 = AFIO_MAPR_I2C1_REMAP, /**< - I2C 1 remapping */ - AFIO_REMAP_SPI1 = AFIO_MAPR_SPI1_REMAP, /**< - SPI 1 remapping */ - AFIO_REMAP_FSMC_NADV = (AFIO_MAPR2_FSMC_NADV | - AFIO_REMAP_USE_MAPR2), /**< - NADV signal not connected */ - AFIO_REMAP_TIM14 = (AFIO_MAPR2_TIM14_REMAP | - AFIO_REMAP_USE_MAPR2), /**< - Timer 14 remapping */ - AFIO_REMAP_TIM13 = (AFIO_MAPR2_TIM13_REMAP | - AFIO_REMAP_USE_MAPR2), /**< - Timer 13 remapping */ - AFIO_REMAP_TIM11 = (AFIO_MAPR2_TIM11_REMAP | - AFIO_REMAP_USE_MAPR2), /**< - Timer 11 remapping */ - AFIO_REMAP_TIM10 = (AFIO_MAPR2_TIM10_REMAP | - AFIO_REMAP_USE_MAPR2), /**< - Timer 10 remapping */ - AFIO_REMAP_TIM9 = (AFIO_MAPR2_TIM9_REMAP | - AFIO_REMAP_USE_MAPR2) /**< - Timer 9 */ -} afio_remap_peripheral; - -void afio_remap(afio_remap_peripheral p); - -/** - * @brief Debug port configuration - * - * Used to configure the behavior of JTAG and Serial Wire (SW) debug - * ports and their associated GPIO pins. - * - * @see afio_cfg_debug_ports() - */ -typedef enum afio_debug_cfg { - AFIO_DEBUG_FULL_SWJ = AFIO_MAPR_SWJ_CFG_FULL_SWJ, /**< - Full Serial Wire and JTAG debug */ - AFIO_DEBUG_FULL_SWJ_NO_NJRST = AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST, /**< - Full Serial Wire and JTAG, but no NJTRST. */ - AFIO_DEBUG_SW_ONLY = AFIO_MAPR_SWJ_CFG_NO_JTAG_SW, /**< - Serial Wire debug only (JTAG-DP disabled, - SW-DP enabled) */ - AFIO_DEBUG_NONE = AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW /**< - No debug; all JTAG and SW pins are free - for use as GPIOs. */ -} afio_debug_cfg; - -/** - * @brief Enable or disable the JTAG and SW debug ports. - * @param config Desired debug port configuration - * @see afio_debug_cfg - */ -static inline void afio_cfg_debug_ports(afio_debug_cfg config) { - __io uint32 *mapr = &AFIO_BASE->MAPR; - *mapr = (*mapr & ~AFIO_MAPR_SWJ_CFG) | config; -} - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/libmaple/stm32f1/include/family/nvic.h b/libmaple/stm32f1/include/family/nvic.h deleted file mode 100644 index 69fd945..0000000 --- a/libmaple/stm32f1/include/family/nvic.h +++ /dev/null @@ -1,139 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2010 Perry Hung. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @file libmaple/stm32f1/nvic.h - * @brief STM32F1 Nested Vectored Interrupt Controller (NVIC) support. - */ - -#ifndef _LIBMAPLE_STM32F1_NVIC_H_ -#define _LIBMAPLE_STM32F1_NVIC_H_ - -#ifdef __cplusplus -extern "C"{ -#endif - -#include - -/** - * @brief Interrupt vector table interrupt numbers. - * @see - */ -typedef enum nvic_irq_num { - NVIC_NMI = -14, /**< Non-maskable interrupt */ - NVIC_HARDFAULT = -13, /**< Hard fault (all class of fault) */ - NVIC_MEM_MANAGE = -12, /**< Memory management */ - NVIC_BUS_FAULT = -11, /**< Bus fault: prefetch fault, memory - access fault. */ - NVIC_USAGE_FAULT = -10, /**< Usage fault: Undefined instruction or - illegal state. */ - NVIC_SVC = -5, /**< System service call via SWI insruction */ - NVIC_DEBUG_MON = -4, /**< Debug monitor */ - NVIC_PEND_SVC = -2, /**< Pendable request for system service */ - NVIC_SYSTICK = -1, /**< System tick timer */ - NVIC_WWDG = 0, /**< Window watchdog interrupt */ - NVIC_PVD = 1, /**< PVD through EXTI line detection */ - NVIC_TAMPER = 2, /**< Tamper */ - NVIC_RTC = 3, /**< Real-time clock */ - NVIC_FLASH = 4, /**< Flash */ - NVIC_RCC = 5, /**< Reset and clock control */ - NVIC_EXTI0 = 6, /**< EXTI line 0 */ - NVIC_EXTI1 = 7, /**< EXTI line 1 */ - NVIC_EXTI2 = 8, /**< EXTI line 2 */ - NVIC_EXTI3 = 9, /**< EXTI line 3 */ - NVIC_EXTI4 = 10, /**< EXTI line 4 */ - NVIC_DMA_CH1 = 11, /**< DMA1 channel 1 */ - NVIC_DMA_CH2 = 12, /**< DMA1 channel 2 */ - NVIC_DMA_CH3 = 13, /**< DMA1 channel 3 */ - NVIC_DMA_CH4 = 14, /**< DMA1 channel 4 */ - NVIC_DMA_CH5 = 15, /**< DMA1 channel 5 */ - NVIC_DMA_CH6 = 16, /**< DMA1 channel 6 */ - NVIC_DMA_CH7 = 17, /**< DMA1 channel 7 */ - NVIC_ADC_1_2 = 18, /**< ADC1 and ADC2 */ - NVIC_USB_HP_CAN_TX = 19, /**< USB high priority or CAN TX */ - NVIC_USB_LP_CAN_RX0 = 20, /**< USB low priority or CAN RX0 */ - NVIC_CAN_RX1 = 21, /**< CAN RX1 */ - NVIC_CAN_SCE = 22, /**< CAN SCE */ - NVIC_EXTI_9_5 = 23, /**< EXTI line [9:5] */ - NVIC_TIMER1_BRK = 24, /**< Timer 1 break */ - NVIC_TIMER1_UP = 25, /**< Timer 1 update */ - NVIC_TIMER1_TRG_COM = 26, /**< Timer 1 trigger and commutation */ - NVIC_TIMER1_CC = 27, /**< Timer 1 capture/compare */ - NVIC_TIMER2 = 28, /**< Timer 2 */ - NVIC_TIMER3 = 29, /**< Timer 3 */ - NVIC_TIMER4 = 30, /**< Timer 4 */ - NVIC_I2C1_EV = 31, /**< I2C1 event */ - NVIC_I2C1_ER = 32, /**< I2C1 error */ - NVIC_I2C2_EV = 33, /**< I2C2 event */ - NVIC_I2C2_ER = 34, /**< I2C2 error */ - NVIC_SPI1 = 35, /**< SPI1 */ - NVIC_SPI2 = 36, /**< SPI2 */ - NVIC_USART1 = 37, /**< USART1 */ - NVIC_USART2 = 38, /**< USART2 */ - NVIC_USART3 = 39, /**< USART3 */ - NVIC_EXTI_15_10 = 40, /**< EXTI line [15:10] */ - NVIC_RTCALARM = 41, /**< RTC alarm through EXTI line */ - NVIC_USBWAKEUP = 42, /**< USB wakeup from suspend through - EXTI line */ - NVIC_TIMER8_BRK = 43, /**< Timer 8 break */ - NVIC_TIMER8_UP = 44, /**< Timer 8 update */ - NVIC_TIMER8_TRG_COM = 45, /**< Timer 8 trigger and commutation */ - NVIC_TIMER8_CC = 46, /**< Timer 8 capture/compare */ -#ifdef STM32_HIGH_DENSITY - NVIC_ADC3 = 47, /**< ADC3 */ - NVIC_FSMC = 48, /**< FSMC */ - NVIC_SDIO = 49, /**< SDIO */ - NVIC_TIMER5 = 50, /**< Timer 5 */ - NVIC_SPI3 = 51, /**< SPI3 */ - NVIC_UART4 = 52, /**< UART4 */ - NVIC_UART5 = 53, /**< UART5 */ - NVIC_TIMER6 = 54, /**< Timer 6 */ - NVIC_TIMER7 = 55, /**< Timer 7 */ - NVIC_DMA2_CH1 = 56, /**< DMA2 channel 1 */ - NVIC_DMA2_CH2 = 57, /**< DMA2 channel 2 */ - NVIC_DMA2_CH3 = 58, /**< DMA2 channel 3 */ - NVIC_DMA2_CH_4_5 = 59, /**< DMA2 channels 4 and 5 */ -#endif -} nvic_irq_num; - -static inline void nvic_irq_disable_all(void) { - /* Note: This only works up to XL density. The fix for - * connectivity line is: - * - * NVIC_BASE->ICER[2] = 0xF; - * - * We don't support connectivity line devices (yet), so leave it - * alone for now. - */ - NVIC_BASE->ICER[0] = 0xFFFFFFFF; - NVIC_BASE->ICER[1] = 0xFFFFFFFF; -} - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/libmaple/stm32f1/include/family/rcc.h b/libmaple/stm32f1/include/family/rcc.h deleted file mode 100644 index 261dc5d..0000000 --- a/libmaple/stm32f1/include/family/rcc.h +++ /dev/null @@ -1,553 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2010 Perry Hung. - * Copyright (c) 2011 LeafLabs, LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @file libmaple/stm32f1/rcc.h - * @brief STM32F1 reset and clock control (RCC) header. - */ - -#ifndef _LIBMAPLE_STM32F1_RCC_H_ -#define _LIBMAPLE_STM32F1_RCC_H_ - -#ifdef __cplusplus -extern "C"{ -#endif - -/* - * Register map - */ - -/** RCC register map type */ -typedef struct rcc_reg_map { - __io uint32 CR; /**< Clock control register */ - __io uint32 CFGR; /**< Clock configuration register */ - __io uint32 CIR; /**< Clock interrupt register */ - __io uint32 APB2RSTR; /**< APB2 peripheral reset register */ - __io uint32 APB1RSTR; /**< APB1 peripheral reset register */ - __io uint32 AHBENR; /**< AHB peripheral clock enable register */ - __io uint32 APB2ENR; /**< APB2 peripheral clock enable register */ - __io uint32 APB1ENR; /**< APB1 peripheral clock enable register */ - __io uint32 BDCR; /**< Backup domain control register */ - __io uint32 CSR; /**< Control/status register */ -} rcc_reg_map; - -/** RCC register map base pointer */ -#define RCC_BASE ((struct rcc_reg_map*)0x40021000) - -/* - * Register bit definitions - */ - -/* Clock control register */ - -#define RCC_CR_PLLRDY_BIT 25 -#define RCC_CR_PLLON_BIT 24 -#define RCC_CR_CSSON_BIT 19 -#define RCC_CR_HSEBYP_BIT 18 -#define RCC_CR_HSERDY_BIT 17 -#define RCC_CR_HSEON_BIT 16 -#define RCC_CR_HSIRDY_BIT 1 -#define RCC_CR_HSION_BIT 0 - -#define RCC_CR_PLLRDY BIT(RCC_CR_PLLRDY_BIT) -#define RCC_CR_PLLON BIT(RCC_CR_PLLON_BIT) -#define RCC_CR_CSSON BIT(RCC_CR_CSSON_BIT) -#define RCC_CR_HSEBYP BIT(RCC_CR_HSEBYP_BIT) -#define RCC_CR_HSERDY BIT(RCC_CR_HSERDY_BIT) -#define RCC_CR_HSEON BIT(RCC_CR_HSEON_BIT) -#define RCC_CR_HSICAL (0xFF << 8) -#define RCC_CR_HSITRIM (0x1F << 3) -#define RCC_CR_HSIRDY BIT(RCC_CR_HSIRDY_BIT) -#define RCC_CR_HSION BIT(RCC_CR_HSION_BIT) - -/* Clock configuration register */ - -#define RCC_CFGR_USBPRE_BIT 22 -#define RCC_CFGR_PLLXTPRE_BIT 17 -#define RCC_CFGR_PLLSRC_BIT 16 - -#define RCC_CFGR_MCO (0x3 << 24) -#define RCC_CFGR_USBPRE BIT(RCC_CFGR_USBPRE_BIT) -#define RCC_CFGR_PLLMUL (0xF << 18) -#define RCC_CFGR_PLLXTPRE BIT(RCC_CFGR_PLLXTPRE_BIT) -#define RCC_CFGR_PLLSRC BIT(RCC_CFGR_PLLSRC_BIT) -#define RCC_CFGR_ADCPRE (0x3 << 14) -#define RCC_CFGR_PPRE2 (0x7 << 11) -#define RCC_CFGR_PPRE1 (0x7 << 8) -#define RCC_CFGR_HPRE (0xF << 4) -#define RCC_CFGR_SWS (0x3 << 2) -#define RCC_CFGR_SWS_PLL (0x2 << 2) -#define RCC_CFGR_SWS_HSE (0x1 << 2) -#define RCC_CFGR_SW 0x3 -#define RCC_CFGR_SW_PLL 0x2 -#define RCC_CFGR_SW_HSE 0x1 - -/* Clock interrupt register */ - -#define RCC_CIR_CSSC_BIT 23 -#define RCC_CIR_PLLRDYC_BIT 20 -#define RCC_CIR_HSERDYC_BIT 19 -#define RCC_CIR_HSIRDYC_BIT 18 -#define RCC_CIR_LSERDYC_BIT 17 -#define RCC_CIR_LSIRDYC_BIT 16 -#define RCC_CIR_PLLRDYIE_BIT 12 -#define RCC_CIR_HSERDYIE_BIT 11 -#define RCC_CIR_HSIRDYIE_BIT 10 -#define RCC_CIR_LSERDYIE_BIT 9 -#define RCC_CIR_LSIRDYIE_BIT 8 -#define RCC_CIR_CSSF_BIT 7 -#define RCC_CIR_PLLRDYF_BIT 4 -#define RCC_CIR_HSERDYF_BIT 3 -#define RCC_CIR_HSIRDYF_BIT 2 -#define RCC_CIR_LSERDYF_BIT 1 -#define RCC_CIR_LSIRDYF_BIT 0 - -#define RCC_CIR_CSSC BIT(RCC_CIR_CSSC_BIT) -#define RCC_CIR_PLLRDYC BIT(RCC_CIR_PLLRDYC_BIT) -#define RCC_CIR_HSERDYC BIT(RCC_CIR_HSERDYC_BIT) -#define RCC_CIR_HSIRDYC BIT(RCC_CIR_HSIRDYC_BIT) -#define RCC_CIR_LSERDYC BIT(RCC_CIR_LSERDYC_BIT) -#define RCC_CIR_LSIRDYC BIT(RCC_CIR_LSIRDYC_BIT) -#define RCC_CIR_PLLRDYIE BIT(RCC_CIR_PLLRDYIE_BIT) -#define RCC_CIR_HSERDYIE BIT(RCC_CIR_HSERDYIE_BIT) -#define RCC_CIR_HSIRDYIE BIT(RCC_CIR_HSIRDYIE_BIT) -#define RCC_CIR_LSERDYIE BIT(RCC_CIR_LSERDYIE_BIT) -#define RCC_CIR_LSIRDYIE BIT(RCC_CIR_LSIRDYIE_BIT) -#define RCC_CIR_CSSF BIT(RCC_CIR_CSSF_BIT) -#define RCC_CIR_PLLRDYF BIT(RCC_CIR_PLLRDYF_BIT) -#define RCC_CIR_HSERDYF BIT(RCC_CIR_HSERDYF_BIT) -#define RCC_CIR_HSIRDYF BIT(RCC_CIR_HSIRDYF_BIT) -#define RCC_CIR_LSERDYF BIT(RCC_CIR_LSERDYF_BIT) -#define RCC_CIR_LSIRDYF BIT(RCC_CIR_LSIRDYF_BIT) - -/* APB2 peripheral reset register */ - -#define RCC_APB2RSTR_TIM11RST_BIT 21 -#define RCC_APB2RSTR_TIM10RST_BIT 20 -#define RCC_APB2RSTR_TIM9RST_BIT 19 -#define RCC_APB2RSTR_ADC3RST_BIT 15 -#define RCC_APB2RSTR_USART1RST_BIT 14 -#define RCC_APB2RSTR_TIM8RST_BIT 13 -#define RCC_APB2RSTR_SPI1RST_BIT 12 -#define RCC_APB2RSTR_TIM1RST_BIT 11 -#define RCC_APB2RSTR_ADC2RST_BIT 10 -#define RCC_APB2RSTR_ADC1RST_BIT 9 -#define RCC_APB2RSTR_IOPGRST_BIT 8 -#define RCC_APB2RSTR_IOPFRST_BIT 7 -#define RCC_APB2RSTR_IOPERST_BIT 6 -#define RCC_APB2RSTR_IOPDRST_BIT 5 -#define RCC_APB2RSTR_IOPCRST_BIT 4 -#define RCC_APB2RSTR_IOPBRST_BIT 3 -#define RCC_APB2RSTR_IOPARST_BIT 2 -#define RCC_APB2RSTR_AFIORST_BIT 0 - -#define RCC_APB2RSTR_TIM11RST BIT(RCC_APB2RSTR_TIM11RST_BIT) -#define RCC_APB2RSTR_TIM10RST BIT(RCC_APB2RSTR_TIM10RST_BIT) -#define RCC_APB2RSTR_TIM9RST BIT(RCC_APB2RSTR_TIM9RST_BIT) -#define RCC_APB2RSTR_ADC3RST BIT(RCC_APB2RSTR_ADC3RST_BIT) -#define RCC_APB2RSTR_USART1RST BIT(RCC_APB2RSTR_USART1RST_BIT) -#define RCC_APB2RSTR_TIM8RST BIT(RCC_APB2RSTR_TIM8RST_BIT) -#define RCC_APB2RSTR_SPI1RST BIT(RCC_APB2RSTR_SPI1RST_BIT) -#define RCC_APB2RSTR_TIM1RST BIT(RCC_APB2RSTR_TIM1RST_BIT) -#define RCC_APB2RSTR_ADC2RST BIT(RCC_APB2RSTR_ADC2RST_BIT) -#define RCC_APB2RSTR_ADC1RST BIT(RCC_APB2RSTR_ADC1RST_BIT) -#define RCC_APB2RSTR_IOPGRST BIT(RCC_APB2RSTR_IOPGRST_BIT) -#define RCC_APB2RSTR_IOPFRST BIT(RCC_APB2RSTR_IOPFRST_BIT) -#define RCC_APB2RSTR_IOPERST BIT(RCC_APB2RSTR_IOPERST_BIT) -#define RCC_APB2RSTR_IOPDRST BIT(RCC_APB2RSTR_IOPDRST_BIT) -#define RCC_APB2RSTR_IOPCRST BIT(RCC_APB2RSTR_IOPCRST_BIT) -#define RCC_APB2RSTR_IOPBRST BIT(RCC_APB2RSTR_IOPBRST_BIT) -#define RCC_APB2RSTR_IOPARST BIT(RCC_APB2RSTR_IOPARST_BIT) -#define RCC_APB2RSTR_AFIORST BIT(RCC_APB2RSTR_AFIORST_BIT) - -/* APB1 peripheral reset register */ - -#define RCC_APB1RSTR_DACRST_BIT 29 -#define RCC_APB1RSTR_PWRRST_BIT 28 -#define RCC_APB1RSTR_BKPRST_BIT 27 -#define RCC_APB1RSTR_CANRST_BIT 25 -#define RCC_APB1RSTR_USBRST_BIT 23 -#define RCC_APB1RSTR_I2C2RST_BIT 22 -#define RCC_APB1RSTR_I2C1RST_BIT 21 -#define RCC_APB1RSTR_UART5RST_BIT 20 -#define RCC_APB1RSTR_UART4RST_BIT 19 -#define RCC_APB1RSTR_USART3RST_BIT 18 -#define RCC_APB1RSTR_USART2RST_BIT 17 -#define RCC_APB1RSTR_SPI3RST_BIT 15 -#define RCC_APB1RSTR_SPI2RST_BIT 14 -#define RCC_APB1RSTR_WWDRST_BIT 11 -#define RCC_APB1RSTR_TIM14RST_BIT 8 -#define RCC_APB1RSTR_TIM13RST_BIT 7 -#define RCC_APB1RSTR_TIM12RST_BIT 6 -#define RCC_APB1RSTR_TIM7RST_BIT 5 -#define RCC_APB1RSTR_TIM6RST_BIT 4 -#define RCC_APB1RSTR_TIM5RST_BIT 3 -#define RCC_APB1RSTR_TIM4RST_BIT 2 -#define RCC_APB1RSTR_TIM3RST_BIT 1 -#define RCC_APB1RSTR_TIM2RST_BIT 0 - -#define RCC_APB1RSTR_DACRST BIT(RCC_APB1RSTR_DACRST_BIT) -#define RCC_APB1RSTR_PWRRST BIT(RCC_APB1RSTR_PWRRST_BIT) -#define RCC_APB1RSTR_BKPRST BIT(RCC_APB1RSTR_BKPRST_BIT) -#define RCC_APB1RSTR_CANRST BIT(RCC_APB1RSTR_CANRST_BIT) -#define RCC_APB1RSTR_USBRST BIT(RCC_APB1RSTR_USBRST_BIT) -#define RCC_APB1RSTR_I2C2RST BIT(RCC_APB1RSTR_I2C2RST_BIT) -#define RCC_APB1RSTR_I2C1RST BIT(RCC_APB1RSTR_I2C1RST_BIT) -#define RCC_APB1RSTR_UART5RST BIT(RCC_APB1RSTR_UART5RST_BIT) -#define RCC_APB1RSTR_UART4RST BIT(RCC_APB1RSTR_UART4RST_BIT) -#define RCC_APB1RSTR_USART3RST BIT(RCC_APB1RSTR_USART3RST_BIT) -#define RCC_APB1RSTR_USART2RST BIT(RCC_APB1RSTR_USART2RST_BIT) -#define RCC_APB1RSTR_SPI3RST BIT(RCC_APB1RSTR_SPI3RST_BIT) -#define RCC_APB1RSTR_SPI2RST BIT(RCC_APB1RSTR_SPI2RST_BIT) -#define RCC_APB1RSTR_WWDRST BIT(RCC_APB1RSTR_WWDRST_BIT) -#define RCC_APB1RSTR_TIM14RST BIT(RCC_APB1RSTR_TIM14RST_BIT) -#define RCC_APB1RSTR_TIM13RST BIT(RCC_APB1RSTR_TIM13RST_BIT) -#define RCC_APB1RSTR_TIM12RST BIT(RCC_APB1RSTR_TIM12RST_BIT) -#define RCC_APB1RSTR_TIM7RST BIT(RCC_APB1RSTR_TIM7RST_BIT) -#define RCC_APB1RSTR_TIM6RST BIT(RCC_APB1RSTR_TIM6RST_BIT) -#define RCC_APB1RSTR_TIM5RST BIT(RCC_APB1RSTR_TIM5RST_BIT) -#define RCC_APB1RSTR_TIM4RST BIT(RCC_APB1RSTR_TIM4RST_BIT) -#define RCC_APB1RSTR_TIM3RST BIT(RCC_APB1RSTR_TIM3RST_BIT) -#define RCC_APB1RSTR_TIM2RST BIT(RCC_APB1RSTR_TIM2RST_BIT) - -/* AHB peripheral clock enable register */ - -#define RCC_AHBENR_SDIOEN_BIT 10 -#define RCC_AHBENR_FSMCEN_BIT 8 -#define RCC_AHBENR_CRCEN_BIT 7 -#define RCC_AHBENR_FLITFEN_BIT 4 -#define RCC_AHBENR_SRAMEN_BIT 2 -#define RCC_AHBENR_DMA2EN_BIT 1 -#define RCC_AHBENR_DMA1EN_BIT 0 - -#define RCC_AHBENR_SDIOEN BIT(RCC_AHBENR_SDIOEN_BIT) -#define RCC_AHBENR_FSMCEN BIT(RCC_AHBENR_FSMCEN_BIT) -#define RCC_AHBENR_CRCEN BIT(RCC_AHBENR_CRCEN_BIT) -#define RCC_AHBENR_FLITFEN BIT(RCC_AHBENR_FLITFEN_BIT) -#define RCC_AHBENR_SRAMEN BIT(RCC_AHBENR_SRAMEN_BIT) -#define RCC_AHBENR_DMA2EN BIT(RCC_AHBENR_DMA2EN_BIT) -#define RCC_AHBENR_DMA1EN BIT(RCC_AHBENR_DMA1EN_BIT) - -/* APB2 peripheral clock enable register */ - -#define RCC_APB2ENR_TIM11EN_BIT 21 -#define RCC_APB2ENR_TIM10EN_BIT 20 -#define RCC_APB2ENR_TIM9EN_BIT 19 -#define RCC_APB2ENR_ADC3EN_BIT 15 -#define RCC_APB2ENR_USART1EN_BIT 14 -#define RCC_APB2ENR_TIM8EN_BIT 13 -#define RCC_APB2ENR_SPI1EN_BIT 12 -#define RCC_APB2ENR_TIM1EN_BIT 11 -#define RCC_APB2ENR_ADC2EN_BIT 10 -#define RCC_APB2ENR_ADC1EN_BIT 9 -#define RCC_APB2ENR_IOPGEN_BIT 8 -#define RCC_APB2ENR_IOPFEN_BIT 7 -#define RCC_APB2ENR_IOPEEN_BIT 6 -#define RCC_APB2ENR_IOPDEN_BIT 5 -#define RCC_APB2ENR_IOPCEN_BIT 4 -#define RCC_APB2ENR_IOPBEN_BIT 3 -#define RCC_APB2ENR_IOPAEN_BIT 2 -#define RCC_APB2ENR_AFIOEN_BIT 0 - -#define RCC_APB2ENR_TIM11EN BIT(RCC_APB2ENR_TIM11EN_BIT) -#define RCC_APB2ENR_TIM10EN BIT(RCC_APB2ENR_TIM10EN_BIT) -#define RCC_APB2ENR_TIM9EN BIT(RCC_APB2ENR_TIM9EN_BIT) -#define RCC_APB2ENR_ADC3EN BIT(RCC_APB2ENR_ADC3EN_BIT) -#define RCC_APB2ENR_USART1EN BIT(RCC_APB2ENR_USART1EN_BIT) -#define RCC_APB2ENR_TIM8EN BIT(RCC_APB2ENR_TIM8EN_BIT) -#define RCC_APB2ENR_SPI1EN BIT(RCC_APB2ENR_SPI1EN_BIT) -#define RCC_APB2ENR_TIM1EN BIT(RCC_APB2ENR_TIM1EN_BIT) -#define RCC_APB2ENR_ADC2EN BIT(RCC_APB2ENR_ADC2EN_BIT) -#define RCC_APB2ENR_ADC1EN BIT(RCC_APB2ENR_ADC1EN_BIT) -#define RCC_APB2ENR_IOPGEN BIT(RCC_APB2ENR_IOPGEN_BIT) -#define RCC_APB2ENR_IOPFEN BIT(RCC_APB2ENR_IOPFEN_BIT) -#define RCC_APB2ENR_IOPEEN BIT(RCC_APB2ENR_IOPEEN_BIT) -#define RCC_APB2ENR_IOPDEN BIT(RCC_APB2ENR_IOPDEN_BIT) -#define RCC_APB2ENR_IOPCEN BIT(RCC_APB2ENR_IOPCEN_BIT) -#define RCC_APB2ENR_IOPBEN BIT(RCC_APB2ENR_IOPBEN_BIT) -#define RCC_APB2ENR_IOPAEN BIT(RCC_APB2ENR_IOPAEN_BIT) -#define RCC_APB2ENR_AFIOEN BIT(RCC_APB2ENR_AFIOEN_BIT) - -/* APB1 peripheral clock enable register */ - -#define RCC_APB1ENR_DACEN_BIT 29 -#define RCC_APB1ENR_PWREN_BIT 28 -#define RCC_APB1ENR_BKPEN_BIT 27 -#define RCC_APB1ENR_CANEN_BIT 25 -#define RCC_APB1ENR_USBEN_BIT 23 -#define RCC_APB1ENR_I2C2EN_BIT 22 -#define RCC_APB1ENR_I2C1EN_BIT 21 -#define RCC_APB1ENR_UART5EN_BIT 20 -#define RCC_APB1ENR_UART4EN_BIT 19 -#define RCC_APB1ENR_USART3EN_BIT 18 -#define RCC_APB1ENR_USART2EN_BIT 17 -#define RCC_APB1ENR_SPI3EN_BIT 15 -#define RCC_APB1ENR_SPI2EN_BIT 14 -#define RCC_APB1ENR_WWDEN_BIT 11 -#define RCC_APB1ENR_TIM14EN_BIT 8 -#define RCC_APB1ENR_TIM13EN_BIT 7 -#define RCC_APB1ENR_TIM12EN_BIT 6 -#define RCC_APB1ENR_TIM7EN_BIT 5 -#define RCC_APB1ENR_TIM6EN_BIT 4 -#define RCC_APB1ENR_TIM5EN_BIT 3 -#define RCC_APB1ENR_TIM4EN_BIT 2 -#define RCC_APB1ENR_TIM3EN_BIT 1 -#define RCC_APB1ENR_TIM2EN_BIT 0 - -#define RCC_APB1ENR_DACEN BIT(RCC_APB1ENR_DACEN_BIT) -#define RCC_APB1ENR_PWREN BIT(RCC_APB1ENR_PWREN_BIT) -#define RCC_APB1ENR_BKPEN BIT(RCC_APB1ENR_BKPEN_BIT) -#define RCC_APB1ENR_CANEN BIT(RCC_APB1ENR_CANEN_BIT) -#define RCC_APB1ENR_USBEN BIT(RCC_APB1ENR_USBEN_BIT) -#define RCC_APB1ENR_I2C2EN BIT(RCC_APB1ENR_I2C2EN_BIT) -#define RCC_APB1ENR_I2C1EN BIT(RCC_APB1ENR_I2C1EN_BIT) -#define RCC_APB1ENR_UART5EN BIT(RCC_APB1ENR_UART5EN_BIT) -#define RCC_APB1ENR_UART4EN BIT(RCC_APB1ENR_UART4EN_BIT) -#define RCC_APB1ENR_USART3EN BIT(RCC_APB1ENR_USART3EN_BIT) -#define RCC_APB1ENR_USART2EN BIT(RCC_APB1ENR_USART2EN_BIT) -#define RCC_APB1ENR_SPI3EN BIT(RCC_APB1ENR_SPI3EN_BIT) -#define RCC_APB1ENR_SPI2EN BIT(RCC_APB1ENR_SPI2EN_BIT) -#define RCC_APB1ENR_WWDEN BIT(RCC_APB1ENR_WWDEN_BIT) -#define RCC_APB1ENR_TIM14EN BIT(RCC_APB1ENR_TIM14EN_BIT) -#define RCC_APB1ENR_TIM13EN BIT(RCC_APB1ENR_TIM13EN_BIT) -#define RCC_APB1ENR_TIM12EN BIT(RCC_APB1ENR_TIM12EN_BIT) -#define RCC_APB1ENR_TIM7EN BIT(RCC_APB1ENR_TIM7EN_BIT) -#define RCC_APB1ENR_TIM6EN BIT(RCC_APB1ENR_TIM6EN_BIT) -#define RCC_APB1ENR_TIM5EN BIT(RCC_APB1ENR_TIM5EN_BIT) -#define RCC_APB1ENR_TIM4EN BIT(RCC_APB1ENR_TIM4EN_BIT) -#define RCC_APB1ENR_TIM3EN BIT(RCC_APB1ENR_TIM3EN_BIT) -#define RCC_APB1ENR_TIM2EN BIT(RCC_APB1ENR_TIM2EN_BIT) - -/* Backup domain control register */ - -#define RCC_BDCR_BDRST_BIT 16 -#define RCC_BDCR_RTCEN_BIT 15 -#define RCC_BDCR_LSEBYP_BIT 2 -#define RCC_BDCR_LSERDY_BIT 1 -#define RCC_BDCR_LSEON_BIT 0 - -#define RCC_BDCR_BDRST BIT(RCC_BDCR_BDRST_BIT) -#define RCC_BDCR_RTCEN BIT(RCC_BDCR_RTC_BIT) -#define RCC_BDCR_RTCSEL (0x3 << 8) -#define RCC_BDCR_RTCSEL_NONE (0x0 << 8) -#define RCC_BDCR_RTCSEL_LSE (0x1 << 8) -#define RCC_BDCR_RTCSEL_HSE (0x3 << 8) -#define RCC_BDCR_LSEBYP BIT(RCC_BDCR_LSEBYP_BIT) -#define RCC_BDCR_LSERDY BIT(RCC_BDCR_LSERDY_BIT) -#define RCC_BDCR_LSEON BIT(RCC_BDCR_LSEON_BIT) - -/* Control/status register */ - -#define RCC_CSR_LPWRRSTF_BIT 31 -#define RCC_CSR_WWDGRSTF_BIT 30 -#define RCC_CSR_IWDGRSTF_BIT 29 -#define RCC_CSR_SFTRSTF_BIT 28 -#define RCC_CSR_PORRSTF_BIT 27 -#define RCC_CSR_PINRSTF_BIT 26 -#define RCC_CSR_RMVF_BIT 24 -#define RCC_CSR_LSIRDY_BIT 1 -#define RCC_CSR_LSION_BIT 0 - -#define RCC_CSR_LPWRRSTF BIT(RCC_CSR_LPWRRSTF_BIT) -#define RCC_CSR_WWDGRSTF BIT(RCC_CSR_WWDGRSTF_BIT) -#define RCC_CSR_IWDGRSTF BIT(RCC_CSR_IWDGRSTF_BIT) -#define RCC_CSR_SFTRSTF BIT(RCC_CSR_SFTRSTF_BIT) -#define RCC_CSR_PORRSTF BIT(RCC_CSR_PORRSTF_BIT) -#define RCC_CSR_PINRSTF BIT(RCC_CSR_PINRSTF_BIT) -#define RCC_CSR_RMVF BIT(RCC_CSR_RMVF_BIT) -#define RCC_CSR_LSIRDY BIT(RCC_CSR_LSIRDY_BIT) -#define RCC_CSR_LSION BIT(RCC_CSR_LSION_BIT) - -/* - * Other types - */ - -/** - * @brief Identifies bus and clock line for a peripheral. - * - * Also generally useful as a unique identifier for that peripheral - * (or its corresponding device struct). - */ -typedef enum rcc_clk_id { - RCC_GPIOA, - RCC_GPIOB, - RCC_GPIOC, - RCC_GPIOD, - RCC_AFIO, - RCC_ADC1, - RCC_ADC2, - RCC_ADC3, - RCC_USART1, - RCC_USART2, - RCC_USART3, - RCC_TIMER1, - RCC_TIMER2, - RCC_TIMER3, - RCC_TIMER4, - RCC_SPI1, - RCC_SPI2, - RCC_DMA1, - RCC_PWR, - RCC_BKP, - RCC_I2C1, - RCC_I2C2, - RCC_CRC, - RCC_FLITF, - RCC_SRAM, - RCC_USB, -#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) - RCC_GPIOE, - RCC_GPIOF, - RCC_GPIOG, - RCC_UART4, - RCC_UART5, - RCC_TIMER5, - RCC_TIMER6, - RCC_TIMER7, - RCC_TIMER8, - RCC_FSMC, - RCC_DAC, - RCC_DMA2, - RCC_SDIO, - RCC_SPI3, -#endif -#ifdef STM32_XL_DENSITY - RCC_TIMER9, - RCC_TIMER10, - RCC_TIMER11, - RCC_TIMER12, - RCC_TIMER13, - RCC_TIMER14, -#endif -} rcc_clk_id; - -/** - * PLL multipliers - * @see rcc_clk_init() - */ -typedef enum rcc_pll_multiplier { - RCC_PLLMUL_2 = (0x0 << 18), - RCC_PLLMUL_3 = (0x1 << 18), - RCC_PLLMUL_4 = (0x2 << 18), - RCC_PLLMUL_5 = (0x3 << 18), - RCC_PLLMUL_6 = (0x4 << 18), - RCC_PLLMUL_7 = (0x5 << 18), - RCC_PLLMUL_8 = (0x6 << 18), - RCC_PLLMUL_9 = (0x7 << 18), - RCC_PLLMUL_10 = (0x8 << 18), - RCC_PLLMUL_11 = (0x9 << 18), - RCC_PLLMUL_12 = (0xA << 18), - RCC_PLLMUL_13 = (0xB << 18), - RCC_PLLMUL_14 = (0xC << 18), - RCC_PLLMUL_15 = (0xD << 18), - RCC_PLLMUL_16 = (0xE << 18), -} rcc_pll_multiplier; - -/** - * PLL entry clock source - * @see rcc_clk_init() - */ -typedef enum rcc_pllsrc { - RCC_PLLSRC_HSE = (0x1 << 16), - RCC_PLLSRC_HSI_DIV_2 = (0x0 << 16) -} rcc_pllsrc; - -typedef enum rcc_clk_domain { - RCC_APB1, - RCC_APB2, - RCC_AHB -} rcc_clk_domain; - -/** - * Prescaler identifiers - * @see rcc_set_prescaler() - */ -typedef enum rcc_prescaler { - RCC_PRESCALER_AHB, - RCC_PRESCALER_APB1, - RCC_PRESCALER_APB2, - RCC_PRESCALER_USB, - RCC_PRESCALER_ADC -} rcc_prescaler; - -/** - * ADC prescaler dividers - * @see rcc_set_prescaler() - */ -typedef enum rcc_adc_divider { - RCC_ADCPRE_PCLK_DIV_2 = 0x0 << 14, - RCC_ADCPRE_PCLK_DIV_4 = 0x1 << 14, - RCC_ADCPRE_PCLK_DIV_6 = 0x2 << 14, - RCC_ADCPRE_PCLK_DIV_8 = 0x3 << 14, -} rcc_adc_divider; - -/** - * APB1 prescaler dividers - * @see rcc_set_prescaler() - */ -typedef enum rcc_apb1_divider { - RCC_APB1_HCLK_DIV_1 = 0x0 << 8, - RCC_APB1_HCLK_DIV_2 = 0x4 << 8, - RCC_APB1_HCLK_DIV_4 = 0x5 << 8, - RCC_APB1_HCLK_DIV_8 = 0x6 << 8, - RCC_APB1_HCLK_DIV_16 = 0x7 << 8, -} rcc_apb1_divider; - -/** - * APB2 prescaler dividers - * @see rcc_set_prescaler() - */ -typedef enum rcc_apb2_divider { - RCC_APB2_HCLK_DIV_1 = 0x0 << 11, - RCC_APB2_HCLK_DIV_2 = 0x4 << 11, - RCC_APB2_HCLK_DIV_4 = 0x5 << 11, - RCC_APB2_HCLK_DIV_8 = 0x6 << 11, - RCC_APB2_HCLK_DIV_16 = 0x7 << 11, -} rcc_apb2_divider; - -/** - * AHB prescaler dividers - * @see rcc_set_prescaler() - */ -typedef enum rcc_ahb_divider { - RCC_AHB_SYSCLK_DIV_1 = 0x0 << 4, - RCC_AHB_SYSCLK_DIV_2 = 0x8 << 4, - RCC_AHB_SYSCLK_DIV_4 = 0x9 << 4, - RCC_AHB_SYSCLK_DIV_8 = 0xA << 4, - RCC_AHB_SYSCLK_DIV_16 = 0xB << 4, - RCC_AHB_SYSCLK_DIV_32 = 0xC << 4, - RCC_AHB_SYSCLK_DIV_64 = 0xD << 4, - RCC_AHB_SYSCLK_DIV_128 = 0xD << 4, - RCC_AHB_SYSCLK_DIV_256 = 0xE << 4, - RCC_AHB_SYSCLK_DIV_512 = 0xF << 4, -} rcc_ahb_divider; - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/libmaple/stm32f1/include/family/stm32.h b/libmaple/stm32f1/include/family/stm32.h deleted file mode 100644 index 0b77ca0..0000000 --- a/libmaple/stm32f1/include/family/stm32.h +++ /dev/null @@ -1,100 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2010, 2011 LeafLabs, LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @file libmaple/stm32f1/stm32.h - * @brief STM32F1 chip- and family-specific definitions. - */ - -#ifndef _LIBMAPLE_STM32F1_H_ -#define _LIBMAPLE_STM32F1_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * Clock configuration. - */ - -#ifndef STM32_PCLK1 -#define STM32_PCLK1 36000000U -#endif - -#ifndef STM32_PCLK2 -#define STM32_PCLK2 72000000U -#endif - -#ifndef STM32_DELAY_US_MULT -#define STM32_DELAY_US_MULT 12 /* FIXME: value is incorrect. */ -#endif - -/* - * Density-specific values. - */ - -#ifdef STM32_MEDIUM_DENSITY -# define STM32_NR_INTERRUPTS 43 -#elif defined(STM32_HIGH_DENSITY) -# define STM32_NR_INTERRUPTS 60 -#else -#error "Unsupported STM32F1 density, or no density specified. Add something " \ - "like -DSTM32_MEDIUM_DENSITY to your compiler arguments." -#endif - -/* - * MCU-specific values. - */ - -#if defined(MCU_STM32F103RB) -# define STM32_NR_GPIO_PORTS 4 -# define STM32_SRAM_END ((void*)0x20005000) - -#elif defined(MCU_STM32F103ZE) -# define STM32_NR_GPIO_PORTS 7 -# define STM32_SRAM_END ((void*)0x20010000) - -#elif defined(MCU_STM32F103CB) - /* This STM32_NR_GPIO_PORTS is not stricly true, but only pins 0 - * and exist, and they're used for OSC (e.g. on e.g. LeafLabs - * Maple Mini), so we'll live with this for now. */ -# define STM32_NR_GPIO_PORTS 3 -# define STM32_SRAM_END ((void*)0x20005000) - -#elif defined(MCU_STM32F103RE) -# define STM32_NR_GPIO_PORTS 4 -# define STM32_SRAM_END ((void*)0x20010000) - -#else -#error "Unrecognized STM32F1 MCU, or no MCU specified. Add something like " \ - "-DMCU_STM32F103RB to your compiler arguments." -#endif - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/libmaple/stm32f1/include/series/flash.h b/libmaple/stm32f1/include/series/flash.h new file mode 100644 index 0000000..efa608c --- /dev/null +++ b/libmaple/stm32f1/include/series/flash.h @@ -0,0 +1,142 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/flash.h + * @brief STM32F1 Flash header. + * + * Provides register map, base pointer, and register bit definitions + * for the Flash controller on the STM32F1 line, along with + * series-specific configuration values. + */ + +#ifndef _LIBMAPLE_STM32F1_FLASH_H_ +#define _LIBMAPLE_STM32F1_FLASH_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include + +/* + * Register map + */ + +/** Flash register map type */ +typedef struct flash_reg_map { + __io uint32 ACR; /**< Access control register */ + __io uint32 KEYR; /**< Key register */ + __io uint32 OPTKEYR; /**< OPTKEY register */ + __io uint32 SR; /**< Status register */ + __io uint32 CR; /**< Control register */ + __io uint32 AR; /**< Address register */ + __io uint32 OBR; /**< Option byte register */ + __io uint32 WRPR; /**< Write protection register */ +} flash_reg_map; + +/** Flash register map base pointer */ +#define FLASH_BASE ((struct flash_reg_map*)0x40022000) + +/* + * Register bit definitions + */ + +/* Access control register */ + +#define FLASH_ACR_PRFTBS_BIT 5 +#define FLASH_ACR_PRFTBE_BIT 4 +#define FLASH_ACR_HLFCYA_BIT 3 + +#define FLASH_ACR_PRFTBS BIT(FLASH_ACR_PRFTBS_BIT) +#define FLASH_ACR_PRFTBE BIT(FLASH_ACR_PRFTBE_BIT) +#define FLASH_ACR_HLFCYA BIT(FLASH_ACR_HLFCYA_BIT) +#define FLASH_ACR_LATENCY 0x7 + +/* Status register */ + +#define FLASH_SR_EOP_BIT 5 +#define FLASH_SR_WRPRTERR_BIT 4 +#define FLASH_SR_PGERR_BIT 2 +#define FLASH_SR_BSY_BIT 0 + +#define FLASH_SR_EOP BIT(FLASH_SR_EOP_BIT) +#define FLASH_SR_WRPRTERR BIT(FLASH_SR_WRPRTERR_BIT) +#define FLASH_SR_PGERR BIT(FLASH_SR_PGERR_BIT) +#define FLASH_SR_BSY BIT(FLASH_SR_BSY_BIT) + +/* Control register */ + +#define FLASH_CR_EOPIE_BIT 12 +#define FLASH_CR_ERRIE_BIT 10 +#define FLASH_CR_OPTWRE_BIT 9 +#define FLASH_CR_LOCK_BIT 7 +#define FLASH_CR_STRT_BIT 6 +#define FLASH_CR_OPTER_BIT 5 +#define FLASH_CR_OPTPG_BIT 4 +#define FLASH_CR_MER_BIT 2 +#define FLASH_CR_PER_BIT 1 +#define FLASH_CR_PG_BIT 0 + +#define FLASH_CR_EOPIE BIT(FLASH_CR_EOPIE_BIT) +#define FLASH_CR_ERRIE BIT(FLASH_CR_ERRIE_BIT) +#define FLASH_CR_OPTWRE BIT(FLASH_CR_OPTWRE_BIT) +#define FLASH_CR_LOCK BIT(FLASH_CR_LOCK_BIT) +#define FLASH_CR_STRT BIT(FLASH_CR_STRT_BIT) +#define FLASH_CR_OPTER BIT(FLASH_CR_OPTER_BIT) +#define FLASH_CR_OPTPG BIT(FLASH_CR_OPTPG_BIT) +#define FLASH_CR_MER BIT(FLASH_CR_MER_BIT) +#define FLASH_CR_PER BIT(FLASH_CR_PER_BIT) +#define FLASH_CR_PG BIT(FLASH_CR_PG_BIT) + +/* Option byte register */ + +#define FLASH_OBR_nRST_STDBY_BIT 4 +#define FLASH_OBR_nRST_STOP_BIT 3 +#define FLASH_OBR_WDG_SW_BIT 2 +#define FLASH_OBR_RDPRT_BIT 1 +#define FLASH_OBR_OPTERR_BIT 0 + +#define FLASH_OBR_DATA1 (0xFF << 18) +#define FLASH_OBR_DATA0 (0xFF << 10) +#define FLASH_OBR_USER 0x3FF +#define FLASH_OBR_nRST_STDBY BIT(FLASH_OBR_nRST_STDBY_BIT) +#define FLASH_OBR_nRST_STOP BIT(FLASH_OBR_nRST_STOP_BIT) +#define FLASH_OBR_WDG_SW BIT(FLASH_OBR_WDG_SW_BIT) +#define FLASH_OBR_RDPRT BIT(FLASH_OBR_RDPRT_BIT) +#define FLASH_OBR_OPTERR BIT(FLASH_OBR_OPTERR_BIT) + +/* + * Series-specific configuration values. + */ + +#define FLASH_SAFE_WAIT_STATES FLASH_WAIT_STATE_2 + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/gpio.h b/libmaple/stm32f1/include/series/gpio.h new file mode 100644 index 0000000..c10244d --- /dev/null +++ b/libmaple/stm32f1/include/series/gpio.h @@ -0,0 +1,479 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +/** + * @file libmaple/stm32f1/gpio.h + * @brief General purpose I/O (GPIO) and Alternate Function I/O + * (AFIO) prototypes, defines, and inlined access functions. + */ + +#ifndef _LIBMAPLE_STM32F1_GPIO_H_ +#define _LIBMAPLE_STM32F1_GPIO_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include +#include + +/* + * GPIO register maps and devices + */ + +/** GPIO register map type */ +typedef struct gpio_reg_map { + __io uint32 CRL; /**< Port configuration register low */ + __io uint32 CRH; /**< Port configuration register high */ + __io uint32 IDR; /**< Port input data register */ + __io uint32 ODR; /**< Port output data register */ + __io uint32 BSRR; /**< Port bit set/reset register */ + __io uint32 BRR; /**< Port bit reset register */ + __io uint32 LCKR; /**< Port configuration lock register */ +} gpio_reg_map; + +/** + * @brief External interrupt line port selector. + * + * Used to determine which GPIO port to map an external interrupt line + * onto. */ +/* (See AFIO sections, below) */ +typedef enum afio_exti_port { + AFIO_EXTI_PA, /**< Use port A (PAx) pin. */ + AFIO_EXTI_PB, /**< Use port B (PBx) pin. */ + AFIO_EXTI_PC, /**< Use port C (PCx) pin. */ + AFIO_EXTI_PD, /**< Use port D (PDx) pin. */ +#ifdef STM32_HIGH_DENSITY + AFIO_EXTI_PE, /**< Use port E (PEx) pin. */ + AFIO_EXTI_PF, /**< Use port F (PFx) pin. */ + AFIO_EXTI_PG, /**< Use port G (PGx) pin. */ +#endif +} afio_exti_port; + +/** GPIO device type */ +typedef struct gpio_dev { + gpio_reg_map *regs; /**< Register map */ + rcc_clk_id clk_id; /**< RCC clock information */ + afio_exti_port exti_port; /**< AFIO external interrupt port value */ +} gpio_dev; + +extern gpio_dev gpioa; +extern gpio_dev* const GPIOA; +extern gpio_dev gpiob; +extern gpio_dev* const GPIOB; +extern gpio_dev gpioc; +extern gpio_dev* const GPIOC; +extern gpio_dev gpiod; +extern gpio_dev* const GPIOD; +#ifdef STM32_HIGH_DENSITY +extern gpio_dev gpioe; +extern gpio_dev* const GPIOE; +extern gpio_dev gpiof; +extern gpio_dev* const GPIOF; +extern gpio_dev gpiog; +extern gpio_dev* const GPIOG; +#endif + +/** GPIO port A register map base pointer */ +#define GPIOA_BASE ((struct gpio_reg_map*)0x40010800) +/** GPIO port B register map base pointer */ +#define GPIOB_BASE ((struct gpio_reg_map*)0x40010C00) +/** GPIO port C register map base pointer */ +#define GPIOC_BASE ((struct gpio_reg_map*)0x40011000) +/** GPIO port D register map base pointer */ +#define GPIOD_BASE ((struct gpio_reg_map*)0x40011400) +#ifdef STM32_HIGH_DENSITY +/** GPIO port E register map base pointer */ +#define GPIOE_BASE ((struct gpio_reg_map*)0x40011800) +/** GPIO port F register map base pointer */ +#define GPIOF_BASE ((struct gpio_reg_map*)0x40011C00) +/** GPIO port G register map base pointer */ +#define GPIOG_BASE ((struct gpio_reg_map*)0x40012000) +#endif + +/* + * GPIO register bit definitions + */ + +/* Control registers, low and high */ + +#define GPIO_CR_CNF (0x3 << 2) +#define GPIO_CR_CNF_INPUT_ANALOG (0x0 << 2) +#define GPIO_CR_CNF_INPUT_FLOATING (0x1 << 2) +#define GPIO_CR_CNF_INPUT_PU_PD (0x2 << 2) +#define GPIO_CR_CNF_OUTPUT_PP (0x0 << 2) +#define GPIO_CR_CNF_OUTPUT_OD (0x1 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_PP (0x2 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_OD (0x3 << 2) +#define GPIO_CR_MODE 0x3 +#define GPIO_CR_MODE_INPUT 0x0 +#define GPIO_CR_MODE_OUTPUT_10MHZ 0x1 +#define GPIO_CR_MODE_OUTPUT_2MHZ 0x2 +#define GPIO_CR_MODE_OUTPUT_50MHZ 0x3 + +/** + * @brief GPIO Pin modes. + * + * These only allow for 50MHZ max output speeds; if you want slower, + * use direct register access. + */ +typedef enum gpio_pin_mode { + GPIO_OUTPUT_PP = (GPIO_CR_CNF_OUTPUT_PP | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output push-pull. */ + GPIO_OUTPUT_OD = (GPIO_CR_CNF_OUTPUT_OD | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output open-drain. */ + GPIO_AF_OUTPUT_PP = (GPIO_CR_CNF_AF_OUTPUT_PP | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function + output push-pull. */ + GPIO_AF_OUTPUT_OD = (GPIO_CR_CNF_AF_OUTPUT_OD | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function + output open drain. */ + GPIO_INPUT_ANALOG = (GPIO_CR_CNF_INPUT_ANALOG | + GPIO_CR_MODE_INPUT), /**< Analog input. */ + GPIO_INPUT_FLOATING = (GPIO_CR_CNF_INPUT_FLOATING | + GPIO_CR_MODE_INPUT), /**< Input floating. */ + GPIO_INPUT_PD = (GPIO_CR_CNF_INPUT_PU_PD | + GPIO_CR_MODE_INPUT), /**< Input pull-down. */ + GPIO_INPUT_PU /**< Input pull-up. */ + /* GPIO_INPUT_PU treated as a special case, for ODR twiddling */ +} gpio_pin_mode; + +/** + * @brief Get a GPIO port's corresponding afio_exti_port. + * @param dev GPIO device whose afio_exti_port to return. + */ +static inline afio_exti_port gpio_exti_port(gpio_dev *dev) { + return dev->exti_port; +} + +/* + * AFIO register map + */ + +/** AFIO register map */ +typedef struct afio_reg_map { + __io uint32 EVCR; /**< Event control register. */ + __io uint32 MAPR; /**< AF remap and debug I/O configuration + register. */ + __io uint32 EXTICR1; /**< External interrupt configuration + register 1. */ + __io uint32 EXTICR2; /**< External interrupt configuration + register 2. */ + __io uint32 EXTICR3; /**< External interrupt configuration + register 3. */ + __io uint32 EXTICR4; /**< External interrupt configuration + register 4. */ + __io uint32 MAPR2; /**< AF remap and debug I/O configuration + register 2. */ +} afio_reg_map; + +/** AFIO register map base pointer. */ +#define AFIO_BASE ((struct afio_reg_map *)0x40010000) + +/* + * AFIO register bit definitions + */ + +/* Event control register */ + +#define AFIO_EVCR_EVOE (0x1 << 7) +#define AFIO_EVCR_PORT_PA (0x0 << 4) +#define AFIO_EVCR_PORT_PB (0x1 << 4) +#define AFIO_EVCR_PORT_PC (0x2 << 4) +#define AFIO_EVCR_PORT_PD (0x3 << 4) +#define AFIO_EVCR_PORT_PE (0x4 << 4) +#define AFIO_EVCR_PIN_0 0x0 +#define AFIO_EVCR_PIN_1 0x1 +#define AFIO_EVCR_PIN_2 0x2 +#define AFIO_EVCR_PIN_3 0x3 +#define AFIO_EVCR_PIN_4 0x4 +#define AFIO_EVCR_PIN_5 0x5 +#define AFIO_EVCR_PIN_6 0x6 +#define AFIO_EVCR_PIN_7 0x7 +#define AFIO_EVCR_PIN_8 0x8 +#define AFIO_EVCR_PIN_9 0x9 +#define AFIO_EVCR_PIN_10 0xA +#define AFIO_EVCR_PIN_11 0xB +#define AFIO_EVCR_PIN_12 0xC +#define AFIO_EVCR_PIN_13 0xD +#define AFIO_EVCR_PIN_14 0xE +#define AFIO_EVCR_PIN_15 0xF + +/* AF remap and debug I/O configuration register */ + +#define AFIO_MAPR_SWJ_CFG (0x7 << 24) +#define AFIO_MAPR_SWJ_CFG_FULL_SWJ (0x0 << 24) +#define AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST (0x1 << 24) +#define AFIO_MAPR_SWJ_CFG_NO_JTAG_SW (0x2 << 24) +#define AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW (0x4 << 24) +#define AFIO_MAPR_ADC2_ETRGREG_REMAP BIT(20) +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP BIT(19) +#define AFIO_MAPR_ADC1_ETRGREG_REMAP BIT(18) +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP BIT(17) +#define AFIO_MAPR_TIM5CH4_IREMAP BIT(16) +#define AFIO_MAPR_PD01_REMAP BIT(15) +#define AFIO_MAPR_CAN_REMAP (0x3 << 13) +#define AFIO_MAPR_CAN_REMAP_NONE (0x0 << 13) +#define AFIO_MAPR_CAN_REMAP_PB8_PB9 (0x2 << 13) +#define AFIO_MAPR_CAN_REMAP_PD0_PD1 (0x3 << 13) +#define AFIO_MAPR_TIM4_REMAP BIT(12) +#define AFIO_MAPR_TIM3_REMAP (0x3 << 10) +#define AFIO_MAPR_TIM3_REMAP_NONE (0x0 << 10) +#define AFIO_MAPR_TIM3_REMAP_PARTIAL (0x2 << 10) +#define AFIO_MAPR_TIM3_REMAP_FULL (0x3 << 10) +#define AFIO_MAPR_TIM2_REMAP (0x3 << 8) +#define AFIO_MAPR_TIM2_REMAP_NONE (0x0 << 8) +#define AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3 (0x1 << 8) +#define AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11 (0x2 << 8) +#define AFIO_MAPR_TIM2_REMAP_FULL (0x3 << 8) +#define AFIO_MAPR_TIM1_REMAP (0x3 << 6) +#define AFIO_MAPR_TIM1_REMAP_NONE (0x0 << 6) +#define AFIO_MAPR_TIM1_REMAP_PARTIAL (0x1 << 6) +#define AFIO_MAPR_TIM1_REMAP_FULL (0x3 << 6) +#define AFIO_MAPR_USART3_REMAP (0x3 << 4) +#define AFIO_MAPR_USART3_REMAP_NONE (0x0 << 4) +#define AFIO_MAPR_USART3_REMAP_PARTIAL (0x1 << 4) +#define AFIO_MAPR_USART3_REMAP_FULL (0x3 << 4) +#define AFIO_MAPR_USART2_REMAP BIT(3) +#define AFIO_MAPR_USART1_REMAP BIT(2) +#define AFIO_MAPR_I2C1_REMAP BIT(1) +#define AFIO_MAPR_SPI1_REMAP BIT(0) + +/* External interrupt configuration register 1 */ + +#define AFIO_EXTICR1_EXTI3 (0xF << 12) +#define AFIO_EXTICR1_EXTI3_PA (0x0 << 12) +#define AFIO_EXTICR1_EXTI3_PB (0x1 << 12) +#define AFIO_EXTICR1_EXTI3_PC (0x2 << 12) +#define AFIO_EXTICR1_EXTI3_PD (0x3 << 12) +#define AFIO_EXTICR1_EXTI3_PE (0x4 << 12) +#define AFIO_EXTICR1_EXTI3_PF (0x5 << 12) +#define AFIO_EXTICR1_EXTI3_PG (0x6 << 12) +#define AFIO_EXTICR1_EXTI2 (0xF << 8) +#define AFIO_EXTICR1_EXTI2_PA (0x0 << 8) +#define AFIO_EXTICR1_EXTI2_PB (0x1 << 8) +#define AFIO_EXTICR1_EXTI2_PC (0x2 << 8) +#define AFIO_EXTICR1_EXTI2_PD (0x3 << 8) +#define AFIO_EXTICR1_EXTI2_PE (0x4 << 8) +#define AFIO_EXTICR1_EXTI2_PF (0x5 << 8) +#define AFIO_EXTICR1_EXTI2_PG (0x6 << 8) +#define AFIO_EXTICR1_EXTI1 (0xF << 4) +#define AFIO_EXTICR1_EXTI1_PA (0x0 << 4) +#define AFIO_EXTICR1_EXTI1_PB (0x1 << 4) +#define AFIO_EXTICR1_EXTI1_PC (0x2 << 4) +#define AFIO_EXTICR1_EXTI1_PD (0x3 << 4) +#define AFIO_EXTICR1_EXTI1_PE (0x4 << 4) +#define AFIO_EXTICR1_EXTI1_PF (0x5 << 4) +#define AFIO_EXTICR1_EXTI1_PG (0x6 << 4) +#define AFIO_EXTICR1_EXTI0 0xF +#define AFIO_EXTICR1_EXTI0_PA 0x0 +#define AFIO_EXTICR1_EXTI0_PB 0x1 +#define AFIO_EXTICR1_EXTI0_PC 0x2 +#define AFIO_EXTICR1_EXTI0_PD 0x3 +#define AFIO_EXTICR1_EXTI0_PE 0x4 +#define AFIO_EXTICR1_EXTI0_PF 0x5 +#define AFIO_EXTICR1_EXTI0_PG 0x6 + +/* External interrupt configuration register 2 */ + +#define AFIO_EXTICR2_EXTI7 (0xF << 12) +#define AFIO_EXTICR2_EXTI7_PA (0x0 << 12) +#define AFIO_EXTICR2_EXTI7_PB (0x1 << 12) +#define AFIO_EXTICR2_EXTI7_PC (0x2 << 12) +#define AFIO_EXTICR2_EXTI7_PD (0x3 << 12) +#define AFIO_EXTICR2_EXTI7_PE (0x4 << 12) +#define AFIO_EXTICR2_EXTI7_PF (0x5 << 12) +#define AFIO_EXTICR2_EXTI7_PG (0x6 << 12) +#define AFIO_EXTICR2_EXTI6 (0xF << 8) +#define AFIO_EXTICR2_EXTI6_PA (0x0 << 8) +#define AFIO_EXTICR2_EXTI6_PB (0x1 << 8) +#define AFIO_EXTICR2_EXTI6_PC (0x2 << 8) +#define AFIO_EXTICR2_EXTI6_PD (0x3 << 8) +#define AFIO_EXTICR2_EXTI6_PE (0x4 << 8) +#define AFIO_EXTICR2_EXTI6_PF (0x5 << 8) +#define AFIO_EXTICR2_EXTI6_PG (0x6 << 8) +#define AFIO_EXTICR2_EXTI5 (0xF << 4) +#define AFIO_EXTICR2_EXTI5_PA (0x0 << 4) +#define AFIO_EXTICR2_EXTI5_PB (0x1 << 4) +#define AFIO_EXTICR2_EXTI5_PC (0x2 << 4) +#define AFIO_EXTICR2_EXTI5_PD (0x3 << 4) +#define AFIO_EXTICR2_EXTI5_PE (0x4 << 4) +#define AFIO_EXTICR2_EXTI5_PF (0x5 << 4) +#define AFIO_EXTICR2_EXTI5_PG (0x6 << 4) +#define AFIO_EXTICR2_EXTI4 0xF +#define AFIO_EXTICR2_EXTI4_PA 0x0 +#define AFIO_EXTICR2_EXTI4_PB 0x1 +#define AFIO_EXTICR2_EXTI4_PC 0x2 +#define AFIO_EXTICR2_EXTI4_PD 0x3 +#define AFIO_EXTICR2_EXTI4_PE 0x4 +#define AFIO_EXTICR2_EXTI4_PF 0x5 +#define AFIO_EXTICR2_EXTI4_PG 0x6 + +/* AF remap and debug I/O configuration register 2 */ + +#define AFIO_MAPR2_FSMC_NADV BIT(10) +#define AFIO_MAPR2_TIM14_REMAP BIT(9) +#define AFIO_MAPR2_TIM13_REMAP BIT(8) +#define AFIO_MAPR2_TIM11_REMAP BIT(7) +#define AFIO_MAPR2_TIM10_REMAP BIT(6) +#define AFIO_MAPR2_TIM9_REMAP BIT(5) + +/* + * AFIO convenience routines + */ + +void afio_init(void); + +/** + * External interrupt line numbers. + */ +typedef enum afio_exti_num { + AFIO_EXTI_0, /**< External interrupt line 0. */ + AFIO_EXTI_1, /**< External interrupt line 1. */ + AFIO_EXTI_2, /**< External interrupt line 2. */ + AFIO_EXTI_3, /**< External interrupt line 3. */ + AFIO_EXTI_4, /**< External interrupt line 4. */ + AFIO_EXTI_5, /**< External interrupt line 5. */ + AFIO_EXTI_6, /**< External interrupt line 6. */ + AFIO_EXTI_7, /**< External interrupt line 7. */ + AFIO_EXTI_8, /**< External interrupt line 8. */ + AFIO_EXTI_9, /**< External interrupt line 9. */ + AFIO_EXTI_10, /**< External interrupt line 10. */ + AFIO_EXTI_11, /**< External interrupt line 11. */ + AFIO_EXTI_12, /**< External interrupt line 12. */ + AFIO_EXTI_13, /**< External interrupt line 13. */ + AFIO_EXTI_14, /**< External interrupt line 14. */ + AFIO_EXTI_15, /**< External interrupt line 15. */ +} afio_exti_num; + +void afio_exti_select(afio_exti_num exti, afio_exti_port gpio_port); + +/* HACK: Use upper bit to denote MAPR2, Bit 31 is reserved and + * not used in either MAPR or MAPR2 */ +#define AFIO_REMAP_USE_MAPR2 (1 << 31) + +/** + * @brief Available peripheral remaps. + * @see afio_remap() + */ +typedef enum afio_remap_peripheral { + AFIO_REMAP_ADC2_ETRGREG = AFIO_MAPR_ADC2_ETRGREG_REMAP, /**< + ADC 2 external trigger regular conversion remapping */ + AFIO_REMAP_ADC2_ETRGINJ = AFIO_MAPR_ADC2_ETRGINJ_REMAP, /**< + ADC 2 external trigger injected conversion remapping */ + AFIO_REMAP_ADC1_ETRGREG = AFIO_MAPR_ADC1_ETRGREG_REMAP, /**< + ADC 1 external trigger regular conversion remapping */ + AFIO_REMAP_ADC1_ETRGINJ = AFIO_MAPR_ADC1_ETRGINJ_REMAP, /**< + ADC 1 external trigger injected conversion remapping */ + AFIO_REMAP_TIM5CH4_I = AFIO_MAPR_TIM5CH4_IREMAP, /**< + Timer 5 channel 4 internal remapping */ + AFIO_REMAP_PD01 = AFIO_MAPR_PD01_REMAP, /**< + Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + AFIO_REMAP_CAN_1 = AFIO_MAPR_CAN_REMAP_PB8_PB9, /**< + CAN alternate function remapping 1 (RX on PB8, TX on PB9) */ + AFIO_REMAP_CAN_2 = AFIO_MAPR_CAN_REMAP_PD0_PD1, /**< + CAN alternate function remapping 2 (RX on PD0, TX on PD1) */ + AFIO_REMAP_TIM4 = AFIO_MAPR_TIM4_REMAP, /**< + Timer 4 remapping */ + AFIO_REMAP_TIM3_PARTIAL = AFIO_MAPR_TIM3_REMAP_PARTIAL, /**< + Timer 3 partial remapping */ + AFIO_REMAP_TIM3_FULL = AFIO_MAPR_TIM3_REMAP_FULL, /**< + Timer 3 full remapping */ + AFIO_REMAP_TIM2_PARTIAL_1 = AFIO_MAPR_TIM2_REMAP_PA15_PB3_PA2_PA3, /**< + Timer 2 partial remapping 1 (CH1 and ETR on PA15, CH2 on PB3, CH3 + on PA2, CH4 on PA3) */ + AFIO_REMAP_TIM2_PARTIAL_2 = AFIO_MAPR_TIM2_REMAP_PA0_PA1_PB10_PB11, /**< + Timer 2 partial remapping 2 (CH1 and ETR on PA0, CH2 on PA1, CH3 + on PB10, CH4 on PB11) */ + AFIO_REMAP_TIM2_FULL = AFIO_MAPR_TIM2_REMAP_FULL, /**< + Timer 2 full remapping */ + AFIO_REMAP_USART2 = AFIO_MAPR_USART2_REMAP, /**< + USART 2 remapping */ + AFIO_REMAP_USART1 = AFIO_MAPR_USART1_REMAP, /**< + USART 1 remapping */ + AFIO_REMAP_I2C1 = AFIO_MAPR_I2C1_REMAP, /**< + I2C 1 remapping */ + AFIO_REMAP_SPI1 = AFIO_MAPR_SPI1_REMAP, /**< + SPI 1 remapping */ + AFIO_REMAP_FSMC_NADV = (AFIO_MAPR2_FSMC_NADV | + AFIO_REMAP_USE_MAPR2), /**< + NADV signal not connected */ + AFIO_REMAP_TIM14 = (AFIO_MAPR2_TIM14_REMAP | + AFIO_REMAP_USE_MAPR2), /**< + Timer 14 remapping */ + AFIO_REMAP_TIM13 = (AFIO_MAPR2_TIM13_REMAP | + AFIO_REMAP_USE_MAPR2), /**< + Timer 13 remapping */ + AFIO_REMAP_TIM11 = (AFIO_MAPR2_TIM11_REMAP | + AFIO_REMAP_USE_MAPR2), /**< + Timer 11 remapping */ + AFIO_REMAP_TIM10 = (AFIO_MAPR2_TIM10_REMAP | + AFIO_REMAP_USE_MAPR2), /**< + Timer 10 remapping */ + AFIO_REMAP_TIM9 = (AFIO_MAPR2_TIM9_REMAP | + AFIO_REMAP_USE_MAPR2) /**< + Timer 9 */ +} afio_remap_peripheral; + +void afio_remap(afio_remap_peripheral p); + +/** + * @brief Debug port configuration + * + * Used to configure the behavior of JTAG and Serial Wire (SW) debug + * ports and their associated GPIO pins. + * + * @see afio_cfg_debug_ports() + */ +typedef enum afio_debug_cfg { + AFIO_DEBUG_FULL_SWJ = AFIO_MAPR_SWJ_CFG_FULL_SWJ, /**< + Full Serial Wire and JTAG debug */ + AFIO_DEBUG_FULL_SWJ_NO_NJRST = AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_NJRST, /**< + Full Serial Wire and JTAG, but no NJTRST. */ + AFIO_DEBUG_SW_ONLY = AFIO_MAPR_SWJ_CFG_NO_JTAG_SW, /**< + Serial Wire debug only (JTAG-DP disabled, + SW-DP enabled) */ + AFIO_DEBUG_NONE = AFIO_MAPR_SWJ_CFG_NO_JTAG_NO_SW /**< + No debug; all JTAG and SW pins are free + for use as GPIOs. */ +} afio_debug_cfg; + +/** + * @brief Enable or disable the JTAG and SW debug ports. + * @param config Desired debug port configuration + * @see afio_debug_cfg + */ +static inline void afio_cfg_debug_ports(afio_debug_cfg config) { + __io uint32 *mapr = &AFIO_BASE->MAPR; + *mapr = (*mapr & ~AFIO_MAPR_SWJ_CFG) | config; +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/nvic.h b/libmaple/stm32f1/include/series/nvic.h new file mode 100644 index 0000000..69fd945 --- /dev/null +++ b/libmaple/stm32f1/include/series/nvic.h @@ -0,0 +1,139 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/nvic.h + * @brief STM32F1 Nested Vectored Interrupt Controller (NVIC) support. + */ + +#ifndef _LIBMAPLE_STM32F1_NVIC_H_ +#define _LIBMAPLE_STM32F1_NVIC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +#include + +/** + * @brief Interrupt vector table interrupt numbers. + * @see + */ +typedef enum nvic_irq_num { + NVIC_NMI = -14, /**< Non-maskable interrupt */ + NVIC_HARDFAULT = -13, /**< Hard fault (all class of fault) */ + NVIC_MEM_MANAGE = -12, /**< Memory management */ + NVIC_BUS_FAULT = -11, /**< Bus fault: prefetch fault, memory + access fault. */ + NVIC_USAGE_FAULT = -10, /**< Usage fault: Undefined instruction or + illegal state. */ + NVIC_SVC = -5, /**< System service call via SWI insruction */ + NVIC_DEBUG_MON = -4, /**< Debug monitor */ + NVIC_PEND_SVC = -2, /**< Pendable request for system service */ + NVIC_SYSTICK = -1, /**< System tick timer */ + NVIC_WWDG = 0, /**< Window watchdog interrupt */ + NVIC_PVD = 1, /**< PVD through EXTI line detection */ + NVIC_TAMPER = 2, /**< Tamper */ + NVIC_RTC = 3, /**< Real-time clock */ + NVIC_FLASH = 4, /**< Flash */ + NVIC_RCC = 5, /**< Reset and clock control */ + NVIC_EXTI0 = 6, /**< EXTI line 0 */ + NVIC_EXTI1 = 7, /**< EXTI line 1 */ + NVIC_EXTI2 = 8, /**< EXTI line 2 */ + NVIC_EXTI3 = 9, /**< EXTI line 3 */ + NVIC_EXTI4 = 10, /**< EXTI line 4 */ + NVIC_DMA_CH1 = 11, /**< DMA1 channel 1 */ + NVIC_DMA_CH2 = 12, /**< DMA1 channel 2 */ + NVIC_DMA_CH3 = 13, /**< DMA1 channel 3 */ + NVIC_DMA_CH4 = 14, /**< DMA1 channel 4 */ + NVIC_DMA_CH5 = 15, /**< DMA1 channel 5 */ + NVIC_DMA_CH6 = 16, /**< DMA1 channel 6 */ + NVIC_DMA_CH7 = 17, /**< DMA1 channel 7 */ + NVIC_ADC_1_2 = 18, /**< ADC1 and ADC2 */ + NVIC_USB_HP_CAN_TX = 19, /**< USB high priority or CAN TX */ + NVIC_USB_LP_CAN_RX0 = 20, /**< USB low priority or CAN RX0 */ + NVIC_CAN_RX1 = 21, /**< CAN RX1 */ + NVIC_CAN_SCE = 22, /**< CAN SCE */ + NVIC_EXTI_9_5 = 23, /**< EXTI line [9:5] */ + NVIC_TIMER1_BRK = 24, /**< Timer 1 break */ + NVIC_TIMER1_UP = 25, /**< Timer 1 update */ + NVIC_TIMER1_TRG_COM = 26, /**< Timer 1 trigger and commutation */ + NVIC_TIMER1_CC = 27, /**< Timer 1 capture/compare */ + NVIC_TIMER2 = 28, /**< Timer 2 */ + NVIC_TIMER3 = 29, /**< Timer 3 */ + NVIC_TIMER4 = 30, /**< Timer 4 */ + NVIC_I2C1_EV = 31, /**< I2C1 event */ + NVIC_I2C1_ER = 32, /**< I2C1 error */ + NVIC_I2C2_EV = 33, /**< I2C2 event */ + NVIC_I2C2_ER = 34, /**< I2C2 error */ + NVIC_SPI1 = 35, /**< SPI1 */ + NVIC_SPI2 = 36, /**< SPI2 */ + NVIC_USART1 = 37, /**< USART1 */ + NVIC_USART2 = 38, /**< USART2 */ + NVIC_USART3 = 39, /**< USART3 */ + NVIC_EXTI_15_10 = 40, /**< EXTI line [15:10] */ + NVIC_RTCALARM = 41, /**< RTC alarm through EXTI line */ + NVIC_USBWAKEUP = 42, /**< USB wakeup from suspend through + EXTI line */ + NVIC_TIMER8_BRK = 43, /**< Timer 8 break */ + NVIC_TIMER8_UP = 44, /**< Timer 8 update */ + NVIC_TIMER8_TRG_COM = 45, /**< Timer 8 trigger and commutation */ + NVIC_TIMER8_CC = 46, /**< Timer 8 capture/compare */ +#ifdef STM32_HIGH_DENSITY + NVIC_ADC3 = 47, /**< ADC3 */ + NVIC_FSMC = 48, /**< FSMC */ + NVIC_SDIO = 49, /**< SDIO */ + NVIC_TIMER5 = 50, /**< Timer 5 */ + NVIC_SPI3 = 51, /**< SPI3 */ + NVIC_UART4 = 52, /**< UART4 */ + NVIC_UART5 = 53, /**< UART5 */ + NVIC_TIMER6 = 54, /**< Timer 6 */ + NVIC_TIMER7 = 55, /**< Timer 7 */ + NVIC_DMA2_CH1 = 56, /**< DMA2 channel 1 */ + NVIC_DMA2_CH2 = 57, /**< DMA2 channel 2 */ + NVIC_DMA2_CH3 = 58, /**< DMA2 channel 3 */ + NVIC_DMA2_CH_4_5 = 59, /**< DMA2 channels 4 and 5 */ +#endif +} nvic_irq_num; + +static inline void nvic_irq_disable_all(void) { + /* Note: This only works up to XL density. The fix for + * connectivity line is: + * + * NVIC_BASE->ICER[2] = 0xF; + * + * We don't support connectivity line devices (yet), so leave it + * alone for now. + */ + NVIC_BASE->ICER[0] = 0xFFFFFFFF; + NVIC_BASE->ICER[1] = 0xFFFFFFFF; +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/rcc.h b/libmaple/stm32f1/include/series/rcc.h new file mode 100644 index 0000000..261dc5d --- /dev/null +++ b/libmaple/stm32f1/include/series/rcc.h @@ -0,0 +1,553 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/rcc.h + * @brief STM32F1 reset and clock control (RCC) header. + */ + +#ifndef _LIBMAPLE_STM32F1_RCC_H_ +#define _LIBMAPLE_STM32F1_RCC_H_ + +#ifdef __cplusplus +extern "C"{ +#endif + +/* + * Register map + */ + +/** RCC register map type */ +typedef struct rcc_reg_map { + __io uint32 CR; /**< Clock control register */ + __io uint32 CFGR; /**< Clock configuration register */ + __io uint32 CIR; /**< Clock interrupt register */ + __io uint32 APB2RSTR; /**< APB2 peripheral reset register */ + __io uint32 APB1RSTR; /**< APB1 peripheral reset register */ + __io uint32 AHBENR; /**< AHB peripheral clock enable register */ + __io uint32 APB2ENR; /**< APB2 peripheral clock enable register */ + __io uint32 APB1ENR; /**< APB1 peripheral clock enable register */ + __io uint32 BDCR; /**< Backup domain control register */ + __io uint32 CSR; /**< Control/status register */ +} rcc_reg_map; + +/** RCC register map base pointer */ +#define RCC_BASE ((struct rcc_reg_map*)0x40021000) + +/* + * Register bit definitions + */ + +/* Clock control register */ + +#define RCC_CR_PLLRDY_BIT 25 +#define RCC_CR_PLLON_BIT 24 +#define RCC_CR_CSSON_BIT 19 +#define RCC_CR_HSEBYP_BIT 18 +#define RCC_CR_HSERDY_BIT 17 +#define RCC_CR_HSEON_BIT 16 +#define RCC_CR_HSIRDY_BIT 1 +#define RCC_CR_HSION_BIT 0 + +#define RCC_CR_PLLRDY BIT(RCC_CR_PLLRDY_BIT) +#define RCC_CR_PLLON BIT(RCC_CR_PLLON_BIT) +#define RCC_CR_CSSON BIT(RCC_CR_CSSON_BIT) +#define RCC_CR_HSEBYP BIT(RCC_CR_HSEBYP_BIT) +#define RCC_CR_HSERDY BIT(RCC_CR_HSERDY_BIT) +#define RCC_CR_HSEON BIT(RCC_CR_HSEON_BIT) +#define RCC_CR_HSICAL (0xFF << 8) +#define RCC_CR_HSITRIM (0x1F << 3) +#define RCC_CR_HSIRDY BIT(RCC_CR_HSIRDY_BIT) +#define RCC_CR_HSION BIT(RCC_CR_HSION_BIT) + +/* Clock configuration register */ + +#define RCC_CFGR_USBPRE_BIT 22 +#define RCC_CFGR_PLLXTPRE_BIT 17 +#define RCC_CFGR_PLLSRC_BIT 16 + +#define RCC_CFGR_MCO (0x3 << 24) +#define RCC_CFGR_USBPRE BIT(RCC_CFGR_USBPRE_BIT) +#define RCC_CFGR_PLLMUL (0xF << 18) +#define RCC_CFGR_PLLXTPRE BIT(RCC_CFGR_PLLXTPRE_BIT) +#define RCC_CFGR_PLLSRC BIT(RCC_CFGR_PLLSRC_BIT) +#define RCC_CFGR_ADCPRE (0x3 << 14) +#define RCC_CFGR_PPRE2 (0x7 << 11) +#define RCC_CFGR_PPRE1 (0x7 << 8) +#define RCC_CFGR_HPRE (0xF << 4) +#define RCC_CFGR_SWS (0x3 << 2) +#define RCC_CFGR_SWS_PLL (0x2 << 2) +#define RCC_CFGR_SWS_HSE (0x1 << 2) +#define RCC_CFGR_SW 0x3 +#define RCC_CFGR_SW_PLL 0x2 +#define RCC_CFGR_SW_HSE 0x1 + +/* Clock interrupt register */ + +#define RCC_CIR_CSSC_BIT 23 +#define RCC_CIR_PLLRDYC_BIT 20 +#define RCC_CIR_HSERDYC_BIT 19 +#define RCC_CIR_HSIRDYC_BIT 18 +#define RCC_CIR_LSERDYC_BIT 17 +#define RCC_CIR_LSIRDYC_BIT 16 +#define RCC_CIR_PLLRDYIE_BIT 12 +#define RCC_CIR_HSERDYIE_BIT 11 +#define RCC_CIR_HSIRDYIE_BIT 10 +#define RCC_CIR_LSERDYIE_BIT 9 +#define RCC_CIR_LSIRDYIE_BIT 8 +#define RCC_CIR_CSSF_BIT 7 +#define RCC_CIR_PLLRDYF_BIT 4 +#define RCC_CIR_HSERDYF_BIT 3 +#define RCC_CIR_HSIRDYF_BIT 2 +#define RCC_CIR_LSERDYF_BIT 1 +#define RCC_CIR_LSIRDYF_BIT 0 + +#define RCC_CIR_CSSC BIT(RCC_CIR_CSSC_BIT) +#define RCC_CIR_PLLRDYC BIT(RCC_CIR_PLLRDYC_BIT) +#define RCC_CIR_HSERDYC BIT(RCC_CIR_HSERDYC_BIT) +#define RCC_CIR_HSIRDYC BIT(RCC_CIR_HSIRDYC_BIT) +#define RCC_CIR_LSERDYC BIT(RCC_CIR_LSERDYC_BIT) +#define RCC_CIR_LSIRDYC BIT(RCC_CIR_LSIRDYC_BIT) +#define RCC_CIR_PLLRDYIE BIT(RCC_CIR_PLLRDYIE_BIT) +#define RCC_CIR_HSERDYIE BIT(RCC_CIR_HSERDYIE_BIT) +#define RCC_CIR_HSIRDYIE BIT(RCC_CIR_HSIRDYIE_BIT) +#define RCC_CIR_LSERDYIE BIT(RCC_CIR_LSERDYIE_BIT) +#define RCC_CIR_LSIRDYIE BIT(RCC_CIR_LSIRDYIE_BIT) +#define RCC_CIR_CSSF BIT(RCC_CIR_CSSF_BIT) +#define RCC_CIR_PLLRDYF BIT(RCC_CIR_PLLRDYF_BIT) +#define RCC_CIR_HSERDYF BIT(RCC_CIR_HSERDYF_BIT) +#define RCC_CIR_HSIRDYF BIT(RCC_CIR_HSIRDYF_BIT) +#define RCC_CIR_LSERDYF BIT(RCC_CIR_LSERDYF_BIT) +#define RCC_CIR_LSIRDYF BIT(RCC_CIR_LSIRDYF_BIT) + +/* APB2 peripheral reset register */ + +#define RCC_APB2RSTR_TIM11RST_BIT 21 +#define RCC_APB2RSTR_TIM10RST_BIT 20 +#define RCC_APB2RSTR_TIM9RST_BIT 19 +#define RCC_APB2RSTR_ADC3RST_BIT 15 +#define RCC_APB2RSTR_USART1RST_BIT 14 +#define RCC_APB2RSTR_TIM8RST_BIT 13 +#define RCC_APB2RSTR_SPI1RST_BIT 12 +#define RCC_APB2RSTR_TIM1RST_BIT 11 +#define RCC_APB2RSTR_ADC2RST_BIT 10 +#define RCC_APB2RSTR_ADC1RST_BIT 9 +#define RCC_APB2RSTR_IOPGRST_BIT 8 +#define RCC_APB2RSTR_IOPFRST_BIT 7 +#define RCC_APB2RSTR_IOPERST_BIT 6 +#define RCC_APB2RSTR_IOPDRST_BIT 5 +#define RCC_APB2RSTR_IOPCRST_BIT 4 +#define RCC_APB2RSTR_IOPBRST_BIT 3 +#define RCC_APB2RSTR_IOPARST_BIT 2 +#define RCC_APB2RSTR_AFIORST_BIT 0 + +#define RCC_APB2RSTR_TIM11RST BIT(RCC_APB2RSTR_TIM11RST_BIT) +#define RCC_APB2RSTR_TIM10RST BIT(RCC_APB2RSTR_TIM10RST_BIT) +#define RCC_APB2RSTR_TIM9RST BIT(RCC_APB2RSTR_TIM9RST_BIT) +#define RCC_APB2RSTR_ADC3RST BIT(RCC_APB2RSTR_ADC3RST_BIT) +#define RCC_APB2RSTR_USART1RST BIT(RCC_APB2RSTR_USART1RST_BIT) +#define RCC_APB2RSTR_TIM8RST BIT(RCC_APB2RSTR_TIM8RST_BIT) +#define RCC_APB2RSTR_SPI1RST BIT(RCC_APB2RSTR_SPI1RST_BIT) +#define RCC_APB2RSTR_TIM1RST BIT(RCC_APB2RSTR_TIM1RST_BIT) +#define RCC_APB2RSTR_ADC2RST BIT(RCC_APB2RSTR_ADC2RST_BIT) +#define RCC_APB2RSTR_ADC1RST BIT(RCC_APB2RSTR_ADC1RST_BIT) +#define RCC_APB2RSTR_IOPGRST BIT(RCC_APB2RSTR_IOPGRST_BIT) +#define RCC_APB2RSTR_IOPFRST BIT(RCC_APB2RSTR_IOPFRST_BIT) +#define RCC_APB2RSTR_IOPERST BIT(RCC_APB2RSTR_IOPERST_BIT) +#define RCC_APB2RSTR_IOPDRST BIT(RCC_APB2RSTR_IOPDRST_BIT) +#define RCC_APB2RSTR_IOPCRST BIT(RCC_APB2RSTR_IOPCRST_BIT) +#define RCC_APB2RSTR_IOPBRST BIT(RCC_APB2RSTR_IOPBRST_BIT) +#define RCC_APB2RSTR_IOPARST BIT(RCC_APB2RSTR_IOPARST_BIT) +#define RCC_APB2RSTR_AFIORST BIT(RCC_APB2RSTR_AFIORST_BIT) + +/* APB1 peripheral reset register */ + +#define RCC_APB1RSTR_DACRST_BIT 29 +#define RCC_APB1RSTR_PWRRST_BIT 28 +#define RCC_APB1RSTR_BKPRST_BIT 27 +#define RCC_APB1RSTR_CANRST_BIT 25 +#define RCC_APB1RSTR_USBRST_BIT 23 +#define RCC_APB1RSTR_I2C2RST_BIT 22 +#define RCC_APB1RSTR_I2C1RST_BIT 21 +#define RCC_APB1RSTR_UART5RST_BIT 20 +#define RCC_APB1RSTR_UART4RST_BIT 19 +#define RCC_APB1RSTR_USART3RST_BIT 18 +#define RCC_APB1RSTR_USART2RST_BIT 17 +#define RCC_APB1RSTR_SPI3RST_BIT 15 +#define RCC_APB1RSTR_SPI2RST_BIT 14 +#define RCC_APB1RSTR_WWDRST_BIT 11 +#define RCC_APB1RSTR_TIM14RST_BIT 8 +#define RCC_APB1RSTR_TIM13RST_BIT 7 +#define RCC_APB1RSTR_TIM12RST_BIT 6 +#define RCC_APB1RSTR_TIM7RST_BIT 5 +#define RCC_APB1RSTR_TIM6RST_BIT 4 +#define RCC_APB1RSTR_TIM5RST_BIT 3 +#define RCC_APB1RSTR_TIM4RST_BIT 2 +#define RCC_APB1RSTR_TIM3RST_BIT 1 +#define RCC_APB1RSTR_TIM2RST_BIT 0 + +#define RCC_APB1RSTR_DACRST BIT(RCC_APB1RSTR_DACRST_BIT) +#define RCC_APB1RSTR_PWRRST BIT(RCC_APB1RSTR_PWRRST_BIT) +#define RCC_APB1RSTR_BKPRST BIT(RCC_APB1RSTR_BKPRST_BIT) +#define RCC_APB1RSTR_CANRST BIT(RCC_APB1RSTR_CANRST_BIT) +#define RCC_APB1RSTR_USBRST BIT(RCC_APB1RSTR_USBRST_BIT) +#define RCC_APB1RSTR_I2C2RST BIT(RCC_APB1RSTR_I2C2RST_BIT) +#define RCC_APB1RSTR_I2C1RST BIT(RCC_APB1RSTR_I2C1RST_BIT) +#define RCC_APB1RSTR_UART5RST BIT(RCC_APB1RSTR_UART5RST_BIT) +#define RCC_APB1RSTR_UART4RST BIT(RCC_APB1RSTR_UART4RST_BIT) +#define RCC_APB1RSTR_USART3RST BIT(RCC_APB1RSTR_USART3RST_BIT) +#define RCC_APB1RSTR_USART2RST BIT(RCC_APB1RSTR_USART2RST_BIT) +#define RCC_APB1RSTR_SPI3RST BIT(RCC_APB1RSTR_SPI3RST_BIT) +#define RCC_APB1RSTR_SPI2RST BIT(RCC_APB1RSTR_SPI2RST_BIT) +#define RCC_APB1RSTR_WWDRST BIT(RCC_APB1RSTR_WWDRST_BIT) +#define RCC_APB1RSTR_TIM14RST BIT(RCC_APB1RSTR_TIM14RST_BIT) +#define RCC_APB1RSTR_TIM13RST BIT(RCC_APB1RSTR_TIM13RST_BIT) +#define RCC_APB1RSTR_TIM12RST BIT(RCC_APB1RSTR_TIM12RST_BIT) +#define RCC_APB1RSTR_TIM7RST BIT(RCC_APB1RSTR_TIM7RST_BIT) +#define RCC_APB1RSTR_TIM6RST BIT(RCC_APB1RSTR_TIM6RST_BIT) +#define RCC_APB1RSTR_TIM5RST BIT(RCC_APB1RSTR_TIM5RST_BIT) +#define RCC_APB1RSTR_TIM4RST BIT(RCC_APB1RSTR_TIM4RST_BIT) +#define RCC_APB1RSTR_TIM3RST BIT(RCC_APB1RSTR_TIM3RST_BIT) +#define RCC_APB1RSTR_TIM2RST BIT(RCC_APB1RSTR_TIM2RST_BIT) + +/* AHB peripheral clock enable register */ + +#define RCC_AHBENR_SDIOEN_BIT 10 +#define RCC_AHBENR_FSMCEN_BIT 8 +#define RCC_AHBENR_CRCEN_BIT 7 +#define RCC_AHBENR_FLITFEN_BIT 4 +#define RCC_AHBENR_SRAMEN_BIT 2 +#define RCC_AHBENR_DMA2EN_BIT 1 +#define RCC_AHBENR_DMA1EN_BIT 0 + +#define RCC_AHBENR_SDIOEN BIT(RCC_AHBENR_SDIOEN_BIT) +#define RCC_AHBENR_FSMCEN BIT(RCC_AHBENR_FSMCEN_BIT) +#define RCC_AHBENR_CRCEN BIT(RCC_AHBENR_CRCEN_BIT) +#define RCC_AHBENR_FLITFEN BIT(RCC_AHBENR_FLITFEN_BIT) +#define RCC_AHBENR_SRAMEN BIT(RCC_AHBENR_SRAMEN_BIT) +#define RCC_AHBENR_DMA2EN BIT(RCC_AHBENR_DMA2EN_BIT) +#define RCC_AHBENR_DMA1EN BIT(RCC_AHBENR_DMA1EN_BIT) + +/* APB2 peripheral clock enable register */ + +#define RCC_APB2ENR_TIM11EN_BIT 21 +#define RCC_APB2ENR_TIM10EN_BIT 20 +#define RCC_APB2ENR_TIM9EN_BIT 19 +#define RCC_APB2ENR_ADC3EN_BIT 15 +#define RCC_APB2ENR_USART1EN_BIT 14 +#define RCC_APB2ENR_TIM8EN_BIT 13 +#define RCC_APB2ENR_SPI1EN_BIT 12 +#define RCC_APB2ENR_TIM1EN_BIT 11 +#define RCC_APB2ENR_ADC2EN_BIT 10 +#define RCC_APB2ENR_ADC1EN_BIT 9 +#define RCC_APB2ENR_IOPGEN_BIT 8 +#define RCC_APB2ENR_IOPFEN_BIT 7 +#define RCC_APB2ENR_IOPEEN_BIT 6 +#define RCC_APB2ENR_IOPDEN_BIT 5 +#define RCC_APB2ENR_IOPCEN_BIT 4 +#define RCC_APB2ENR_IOPBEN_BIT 3 +#define RCC_APB2ENR_IOPAEN_BIT 2 +#define RCC_APB2ENR_AFIOEN_BIT 0 + +#define RCC_APB2ENR_TIM11EN BIT(RCC_APB2ENR_TIM11EN_BIT) +#define RCC_APB2ENR_TIM10EN BIT(RCC_APB2ENR_TIM10EN_BIT) +#define RCC_APB2ENR_TIM9EN BIT(RCC_APB2ENR_TIM9EN_BIT) +#define RCC_APB2ENR_ADC3EN BIT(RCC_APB2ENR_ADC3EN_BIT) +#define RCC_APB2ENR_USART1EN BIT(RCC_APB2ENR_USART1EN_BIT) +#define RCC_APB2ENR_TIM8EN BIT(RCC_APB2ENR_TIM8EN_BIT) +#define RCC_APB2ENR_SPI1EN BIT(RCC_APB2ENR_SPI1EN_BIT) +#define RCC_APB2ENR_TIM1EN BIT(RCC_APB2ENR_TIM1EN_BIT) +#define RCC_APB2ENR_ADC2EN BIT(RCC_APB2ENR_ADC2EN_BIT) +#define RCC_APB2ENR_ADC1EN BIT(RCC_APB2ENR_ADC1EN_BIT) +#define RCC_APB2ENR_IOPGEN BIT(RCC_APB2ENR_IOPGEN_BIT) +#define RCC_APB2ENR_IOPFEN BIT(RCC_APB2ENR_IOPFEN_BIT) +#define RCC_APB2ENR_IOPEEN BIT(RCC_APB2ENR_IOPEEN_BIT) +#define RCC_APB2ENR_IOPDEN BIT(RCC_APB2ENR_IOPDEN_BIT) +#define RCC_APB2ENR_IOPCEN BIT(RCC_APB2ENR_IOPCEN_BIT) +#define RCC_APB2ENR_IOPBEN BIT(RCC_APB2ENR_IOPBEN_BIT) +#define RCC_APB2ENR_IOPAEN BIT(RCC_APB2ENR_IOPAEN_BIT) +#define RCC_APB2ENR_AFIOEN BIT(RCC_APB2ENR_AFIOEN_BIT) + +/* APB1 peripheral clock enable register */ + +#define RCC_APB1ENR_DACEN_BIT 29 +#define RCC_APB1ENR_PWREN_BIT 28 +#define RCC_APB1ENR_BKPEN_BIT 27 +#define RCC_APB1ENR_CANEN_BIT 25 +#define RCC_APB1ENR_USBEN_BIT 23 +#define RCC_APB1ENR_I2C2EN_BIT 22 +#define RCC_APB1ENR_I2C1EN_BIT 21 +#define RCC_APB1ENR_UART5EN_BIT 20 +#define RCC_APB1ENR_UART4EN_BIT 19 +#define RCC_APB1ENR_USART3EN_BIT 18 +#define RCC_APB1ENR_USART2EN_BIT 17 +#define RCC_APB1ENR_SPI3EN_BIT 15 +#define RCC_APB1ENR_SPI2EN_BIT 14 +#define RCC_APB1ENR_WWDEN_BIT 11 +#define RCC_APB1ENR_TIM14EN_BIT 8 +#define RCC_APB1ENR_TIM13EN_BIT 7 +#define RCC_APB1ENR_TIM12EN_BIT 6 +#define RCC_APB1ENR_TIM7EN_BIT 5 +#define RCC_APB1ENR_TIM6EN_BIT 4 +#define RCC_APB1ENR_TIM5EN_BIT 3 +#define RCC_APB1ENR_TIM4EN_BIT 2 +#define RCC_APB1ENR_TIM3EN_BIT 1 +#define RCC_APB1ENR_TIM2EN_BIT 0 + +#define RCC_APB1ENR_DACEN BIT(RCC_APB1ENR_DACEN_BIT) +#define RCC_APB1ENR_PWREN BIT(RCC_APB1ENR_PWREN_BIT) +#define RCC_APB1ENR_BKPEN BIT(RCC_APB1ENR_BKPEN_BIT) +#define RCC_APB1ENR_CANEN BIT(RCC_APB1ENR_CANEN_BIT) +#define RCC_APB1ENR_USBEN BIT(RCC_APB1ENR_USBEN_BIT) +#define RCC_APB1ENR_I2C2EN BIT(RCC_APB1ENR_I2C2EN_BIT) +#define RCC_APB1ENR_I2C1EN BIT(RCC_APB1ENR_I2C1EN_BIT) +#define RCC_APB1ENR_UART5EN BIT(RCC_APB1ENR_UART5EN_BIT) +#define RCC_APB1ENR_UART4EN BIT(RCC_APB1ENR_UART4EN_BIT) +#define RCC_APB1ENR_USART3EN BIT(RCC_APB1ENR_USART3EN_BIT) +#define RCC_APB1ENR_USART2EN BIT(RCC_APB1ENR_USART2EN_BIT) +#define RCC_APB1ENR_SPI3EN BIT(RCC_APB1ENR_SPI3EN_BIT) +#define RCC_APB1ENR_SPI2EN BIT(RCC_APB1ENR_SPI2EN_BIT) +#define RCC_APB1ENR_WWDEN BIT(RCC_APB1ENR_WWDEN_BIT) +#define RCC_APB1ENR_TIM14EN BIT(RCC_APB1ENR_TIM14EN_BIT) +#define RCC_APB1ENR_TIM13EN BIT(RCC_APB1ENR_TIM13EN_BIT) +#define RCC_APB1ENR_TIM12EN BIT(RCC_APB1ENR_TIM12EN_BIT) +#define RCC_APB1ENR_TIM7EN BIT(RCC_APB1ENR_TIM7EN_BIT) +#define RCC_APB1ENR_TIM6EN BIT(RCC_APB1ENR_TIM6EN_BIT) +#define RCC_APB1ENR_TIM5EN BIT(RCC_APB1ENR_TIM5EN_BIT) +#define RCC_APB1ENR_TIM4EN BIT(RCC_APB1ENR_TIM4EN_BIT) +#define RCC_APB1ENR_TIM3EN BIT(RCC_APB1ENR_TIM3EN_BIT) +#define RCC_APB1ENR_TIM2EN BIT(RCC_APB1ENR_TIM2EN_BIT) + +/* Backup domain control register */ + +#define RCC_BDCR_BDRST_BIT 16 +#define RCC_BDCR_RTCEN_BIT 15 +#define RCC_BDCR_LSEBYP_BIT 2 +#define RCC_BDCR_LSERDY_BIT 1 +#define RCC_BDCR_LSEON_BIT 0 + +#define RCC_BDCR_BDRST BIT(RCC_BDCR_BDRST_BIT) +#define RCC_BDCR_RTCEN BIT(RCC_BDCR_RTC_BIT) +#define RCC_BDCR_RTCSEL (0x3 << 8) +#define RCC_BDCR_RTCSEL_NONE (0x0 << 8) +#define RCC_BDCR_RTCSEL_LSE (0x1 << 8) +#define RCC_BDCR_RTCSEL_HSE (0x3 << 8) +#define RCC_BDCR_LSEBYP BIT(RCC_BDCR_LSEBYP_BIT) +#define RCC_BDCR_LSERDY BIT(RCC_BDCR_LSERDY_BIT) +#define RCC_BDCR_LSEON BIT(RCC_BDCR_LSEON_BIT) + +/* Control/status register */ + +#define RCC_CSR_LPWRRSTF_BIT 31 +#define RCC_CSR_WWDGRSTF_BIT 30 +#define RCC_CSR_IWDGRSTF_BIT 29 +#define RCC_CSR_SFTRSTF_BIT 28 +#define RCC_CSR_PORRSTF_BIT 27 +#define RCC_CSR_PINRSTF_BIT 26 +#define RCC_CSR_RMVF_BIT 24 +#define RCC_CSR_LSIRDY_BIT 1 +#define RCC_CSR_LSION_BIT 0 + +#define RCC_CSR_LPWRRSTF BIT(RCC_CSR_LPWRRSTF_BIT) +#define RCC_CSR_WWDGRSTF BIT(RCC_CSR_WWDGRSTF_BIT) +#define RCC_CSR_IWDGRSTF BIT(RCC_CSR_IWDGRSTF_BIT) +#define RCC_CSR_SFTRSTF BIT(RCC_CSR_SFTRSTF_BIT) +#define RCC_CSR_PORRSTF BIT(RCC_CSR_PORRSTF_BIT) +#define RCC_CSR_PINRSTF BIT(RCC_CSR_PINRSTF_BIT) +#define RCC_CSR_RMVF BIT(RCC_CSR_RMVF_BIT) +#define RCC_CSR_LSIRDY BIT(RCC_CSR_LSIRDY_BIT) +#define RCC_CSR_LSION BIT(RCC_CSR_LSION_BIT) + +/* + * Other types + */ + +/** + * @brief Identifies bus and clock line for a peripheral. + * + * Also generally useful as a unique identifier for that peripheral + * (or its corresponding device struct). + */ +typedef enum rcc_clk_id { + RCC_GPIOA, + RCC_GPIOB, + RCC_GPIOC, + RCC_GPIOD, + RCC_AFIO, + RCC_ADC1, + RCC_ADC2, + RCC_ADC3, + RCC_USART1, + RCC_USART2, + RCC_USART3, + RCC_TIMER1, + RCC_TIMER2, + RCC_TIMER3, + RCC_TIMER4, + RCC_SPI1, + RCC_SPI2, + RCC_DMA1, + RCC_PWR, + RCC_BKP, + RCC_I2C1, + RCC_I2C2, + RCC_CRC, + RCC_FLITF, + RCC_SRAM, + RCC_USB, +#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) + RCC_GPIOE, + RCC_GPIOF, + RCC_GPIOG, + RCC_UART4, + RCC_UART5, + RCC_TIMER5, + RCC_TIMER6, + RCC_TIMER7, + RCC_TIMER8, + RCC_FSMC, + RCC_DAC, + RCC_DMA2, + RCC_SDIO, + RCC_SPI3, +#endif +#ifdef STM32_XL_DENSITY + RCC_TIMER9, + RCC_TIMER10, + RCC_TIMER11, + RCC_TIMER12, + RCC_TIMER13, + RCC_TIMER14, +#endif +} rcc_clk_id; + +/** + * PLL multipliers + * @see rcc_clk_init() + */ +typedef enum rcc_pll_multiplier { + RCC_PLLMUL_2 = (0x0 << 18), + RCC_PLLMUL_3 = (0x1 << 18), + RCC_PLLMUL_4 = (0x2 << 18), + RCC_PLLMUL_5 = (0x3 << 18), + RCC_PLLMUL_6 = (0x4 << 18), + RCC_PLLMUL_7 = (0x5 << 18), + RCC_PLLMUL_8 = (0x6 << 18), + RCC_PLLMUL_9 = (0x7 << 18), + RCC_PLLMUL_10 = (0x8 << 18), + RCC_PLLMUL_11 = (0x9 << 18), + RCC_PLLMUL_12 = (0xA << 18), + RCC_PLLMUL_13 = (0xB << 18), + RCC_PLLMUL_14 = (0xC << 18), + RCC_PLLMUL_15 = (0xD << 18), + RCC_PLLMUL_16 = (0xE << 18), +} rcc_pll_multiplier; + +/** + * PLL entry clock source + * @see rcc_clk_init() + */ +typedef enum rcc_pllsrc { + RCC_PLLSRC_HSE = (0x1 << 16), + RCC_PLLSRC_HSI_DIV_2 = (0x0 << 16) +} rcc_pllsrc; + +typedef enum rcc_clk_domain { + RCC_APB1, + RCC_APB2, + RCC_AHB +} rcc_clk_domain; + +/** + * Prescaler identifiers + * @see rcc_set_prescaler() + */ +typedef enum rcc_prescaler { + RCC_PRESCALER_AHB, + RCC_PRESCALER_APB1, + RCC_PRESCALER_APB2, + RCC_PRESCALER_USB, + RCC_PRESCALER_ADC +} rcc_prescaler; + +/** + * ADC prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_adc_divider { + RCC_ADCPRE_PCLK_DIV_2 = 0x0 << 14, + RCC_ADCPRE_PCLK_DIV_4 = 0x1 << 14, + RCC_ADCPRE_PCLK_DIV_6 = 0x2 << 14, + RCC_ADCPRE_PCLK_DIV_8 = 0x3 << 14, +} rcc_adc_divider; + +/** + * APB1 prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_apb1_divider { + RCC_APB1_HCLK_DIV_1 = 0x0 << 8, + RCC_APB1_HCLK_DIV_2 = 0x4 << 8, + RCC_APB1_HCLK_DIV_4 = 0x5 << 8, + RCC_APB1_HCLK_DIV_8 = 0x6 << 8, + RCC_APB1_HCLK_DIV_16 = 0x7 << 8, +} rcc_apb1_divider; + +/** + * APB2 prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_apb2_divider { + RCC_APB2_HCLK_DIV_1 = 0x0 << 11, + RCC_APB2_HCLK_DIV_2 = 0x4 << 11, + RCC_APB2_HCLK_DIV_4 = 0x5 << 11, + RCC_APB2_HCLK_DIV_8 = 0x6 << 11, + RCC_APB2_HCLK_DIV_16 = 0x7 << 11, +} rcc_apb2_divider; + +/** + * AHB prescaler dividers + * @see rcc_set_prescaler() + */ +typedef enum rcc_ahb_divider { + RCC_AHB_SYSCLK_DIV_1 = 0x0 << 4, + RCC_AHB_SYSCLK_DIV_2 = 0x8 << 4, + RCC_AHB_SYSCLK_DIV_4 = 0x9 << 4, + RCC_AHB_SYSCLK_DIV_8 = 0xA << 4, + RCC_AHB_SYSCLK_DIV_16 = 0xB << 4, + RCC_AHB_SYSCLK_DIV_32 = 0xC << 4, + RCC_AHB_SYSCLK_DIV_64 = 0xD << 4, + RCC_AHB_SYSCLK_DIV_128 = 0xD << 4, + RCC_AHB_SYSCLK_DIV_256 = 0xE << 4, + RCC_AHB_SYSCLK_DIV_512 = 0xF << 4, +} rcc_ahb_divider; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/stm32f1/include/series/stm32.h b/libmaple/stm32f1/include/series/stm32.h new file mode 100644 index 0000000..f0ca616 --- /dev/null +++ b/libmaple/stm32f1/include/series/stm32.h @@ -0,0 +1,100 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010, 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/stm32f1/stm32.h + * @brief STM32F1 chip- and series-specific definitions. + */ + +#ifndef _LIBMAPLE_STM32F1_H_ +#define _LIBMAPLE_STM32F1_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Clock configuration. + */ + +#ifndef STM32_PCLK1 +#define STM32_PCLK1 36000000U +#endif + +#ifndef STM32_PCLK2 +#define STM32_PCLK2 72000000U +#endif + +#ifndef STM32_DELAY_US_MULT +#define STM32_DELAY_US_MULT 12 /* FIXME: value is incorrect. */ +#endif + +/* + * Density-specific values. + */ + +#ifdef STM32_MEDIUM_DENSITY +# define STM32_NR_INTERRUPTS 43 +#elif defined(STM32_HIGH_DENSITY) +# define STM32_NR_INTERRUPTS 60 +#else +#error "Unsupported STM32F1 density, or no density specified. Add something " \ + "like -DSTM32_MEDIUM_DENSITY to your compiler arguments." +#endif + +/* + * MCU-specific values. + */ + +#if defined(MCU_STM32F103RB) +# define STM32_NR_GPIO_PORTS 4 +# define STM32_SRAM_END ((void*)0x20005000) + +#elif defined(MCU_STM32F103ZE) +# define STM32_NR_GPIO_PORTS 7 +# define STM32_SRAM_END ((void*)0x20010000) + +#elif defined(MCU_STM32F103CB) + /* This STM32_NR_GPIO_PORTS is not stricly true, but only pins 0 + * and exist, and they're used for OSC (e.g. on e.g. LeafLabs + * Maple Mini), so we'll live with this for now. */ +# define STM32_NR_GPIO_PORTS 3 +# define STM32_SRAM_END ((void*)0x20005000) + +#elif defined(MCU_STM32F103RE) +# define STM32_NR_GPIO_PORTS 4 +# define STM32_SRAM_END ((void*)0x20010000) + +#else +#error "Unrecognized STM32F1 MCU, or no MCU specified. Add something like " \ + "-DMCU_STM32F103RB to your compiler arguments." +#endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/support/ld/stm32/family/f1/performance/vector_symbols.inc b/support/ld/stm32/family/f1/performance/vector_symbols.inc deleted file mode 100644 index f8519bb..0000000 --- a/support/ld/stm32/family/f1/performance/vector_symbols.inc +++ /dev/null @@ -1,78 +0,0 @@ -EXTERN(__msp_init) -EXTERN(__exc_reset) -EXTERN(__exc_nmi) -EXTERN(__exc_hardfault) -EXTERN(__exc_memmanage) -EXTERN(__exc_busfault) -EXTERN(__exc_usagefault) -EXTERN(__stm32reservedexception7) -EXTERN(__stm32reservedexception8) -EXTERN(__stm32reservedexception9) -EXTERN(__stm32reservedexception10) -EXTERN(__exc_svc) -EXTERN(__exc_debug_monitor) -EXTERN(__stm32reservedexception13) -EXTERN(__exc_pendsv) -EXTERN(__exc_systick) - -EXTERN(__irq_wwdg) -EXTERN(__irq_pvd) -EXTERN(__irq_tamper) -EXTERN(__irq_rtc) -EXTERN(__irq_flash) -EXTERN(__irq_rcc) -EXTERN(__irq_exti0) -EXTERN(__irq_exti1) -EXTERN(__irq_exti2) -EXTERN(__irq_exti3) -EXTERN(__irq_exti4) -EXTERN(__irq_dma1_channel1) -EXTERN(__irq_dma1_channel2) -EXTERN(__irq_dma1_channel3) -EXTERN(__irq_dma1_channel4) -EXTERN(__irq_dma1_channel5) -EXTERN(__irq_dma1_channel6) -EXTERN(__irq_dma1_channel7) -EXTERN(__irq_adc) -EXTERN(__irq_usb_hp_can_tx) -EXTERN(__irq_usb_lp_can_rx0) -EXTERN(__irq_can_rx1) -EXTERN(__irq_can_sce) -EXTERN(__irq_exti9_5) -EXTERN(__irq_tim1_brk) -EXTERN(__irq_tim1_up) -EXTERN(__irq_tim1_trg_com) -EXTERN(__irq_tim1_cc) -EXTERN(__irq_tim2) -EXTERN(__irq_tim3) -EXTERN(__irq_tim4) -EXTERN(__irq_i2c1_ev) -EXTERN(__irq_i2c1_er) -EXTERN(__irq_i2c2_ev) -EXTERN(__irq_i2c2_er) -EXTERN(__irq_spi1) -EXTERN(__irq_spi2) -EXTERN(__irq_usart1) -EXTERN(__irq_usart2) -EXTERN(__irq_usart3) -EXTERN(__irq_exti15_10) -EXTERN(__irq_rtcalarm) -EXTERN(__irq_usbwakeup) - -EXTERN(__irq_tim8_brk) -EXTERN(__irq_tim8_up) -EXTERN(__irq_tim8_trg_com) -EXTERN(__irq_tim8_cc) -EXTERN(__irq_adc3) -EXTERN(__irq_fsmc) -EXTERN(__irq_sdio) -EXTERN(__irq_tim5) -EXTERN(__irq_spi3) -EXTERN(__irq_uart4) -EXTERN(__irq_uart5) -EXTERN(__irq_tim6) -EXTERN(__irq_tim7) -EXTERN(__irq_dma2_channel1) -EXTERN(__irq_dma2_channel2) -EXTERN(__irq_dma2_channel3) -EXTERN(__irq_dma2_channel4_5) diff --git a/support/ld/stm32/series/f1/performance/vector_symbols.inc b/support/ld/stm32/series/f1/performance/vector_symbols.inc new file mode 100644 index 0000000..f8519bb --- /dev/null +++ b/support/ld/stm32/series/f1/performance/vector_symbols.inc @@ -0,0 +1,78 @@ +EXTERN(__msp_init) +EXTERN(__exc_reset) +EXTERN(__exc_nmi) +EXTERN(__exc_hardfault) +EXTERN(__exc_memmanage) +EXTERN(__exc_busfault) +EXTERN(__exc_usagefault) +EXTERN(__stm32reservedexception7) +EXTERN(__stm32reservedexception8) +EXTERN(__stm32reservedexception9) +EXTERN(__stm32reservedexception10) +EXTERN(__exc_svc) +EXTERN(__exc_debug_monitor) +EXTERN(__stm32reservedexception13) +EXTERN(__exc_pendsv) +EXTERN(__exc_systick) + +EXTERN(__irq_wwdg) +EXTERN(__irq_pvd) +EXTERN(__irq_tamper) +EXTERN(__irq_rtc) +EXTERN(__irq_flash) +EXTERN(__irq_rcc) +EXTERN(__irq_exti0) +EXTERN(__irq_exti1) +EXTERN(__irq_exti2) +EXTERN(__irq_exti3) +EXTERN(__irq_exti4) +EXTERN(__irq_dma1_channel1) +EXTERN(__irq_dma1_channel2) +EXTERN(__irq_dma1_channel3) +EXTERN(__irq_dma1_channel4) +EXTERN(__irq_dma1_channel5) +EXTERN(__irq_dma1_channel6) +EXTERN(__irq_dma1_channel7) +EXTERN(__irq_adc) +EXTERN(__irq_usb_hp_can_tx) +EXTERN(__irq_usb_lp_can_rx0) +EXTERN(__irq_can_rx1) +EXTERN(__irq_can_sce) +EXTERN(__irq_exti9_5) +EXTERN(__irq_tim1_brk) +EXTERN(__irq_tim1_up) +EXTERN(__irq_tim1_trg_com) +EXTERN(__irq_tim1_cc) +EXTERN(__irq_tim2) +EXTERN(__irq_tim3) +EXTERN(__irq_tim4) +EXTERN(__irq_i2c1_ev) +EXTERN(__irq_i2c1_er) +EXTERN(__irq_i2c2_ev) +EXTERN(__irq_i2c2_er) +EXTERN(__irq_spi1) +EXTERN(__irq_spi2) +EXTERN(__irq_usart1) +EXTERN(__irq_usart2) +EXTERN(__irq_usart3) +EXTERN(__irq_exti15_10) +EXTERN(__irq_rtcalarm) +EXTERN(__irq_usbwakeup) + +EXTERN(__irq_tim8_brk) +EXTERN(__irq_tim8_up) +EXTERN(__irq_tim8_trg_com) +EXTERN(__irq_tim8_cc) +EXTERN(__irq_adc3) +EXTERN(__irq_fsmc) +EXTERN(__irq_sdio) +EXTERN(__irq_tim5) +EXTERN(__irq_spi3) +EXTERN(__irq_uart4) +EXTERN(__irq_uart5) +EXTERN(__irq_tim6) +EXTERN(__irq_tim7) +EXTERN(__irq_dma2_channel1) +EXTERN(__irq_dma2_channel2) +EXTERN(__irq_dma2_channel3) +EXTERN(__irq_dma2_channel4_5) diff --git a/support/make/target-config.mk b/support/make/target-config.mk index ea81b3b..2e360ea 100644 --- a/support/make/target-config.mk +++ b/support/make/target-config.mk @@ -53,14 +53,14 @@ TARGET_FLAGS += -DBOARD_$(BOARD) -DMCU_$(MCU) \ -DERROR_LED_PORT=$(ERROR_LED_PORT) \ -DERROR_LED_PIN=$(ERROR_LED_PIN) -# STM32 family-specific configuration values. +# STM32 series-specific configuration values. # NB: these only work for STM32F1 performance line chips, but those # are the only ones we support at this time. If you add support for # STM32F1 connectivity line MCUs or other STM32 families, this section # will need to change. -LD_FAMILY_PATH := $(LDDIR)/stm32/family/f1/performance -LIBMAPLE_MODULE_FAMILY := $(LIBMAPLE_PATH)/stm32f1 +LD_SERIES_PATH := $(LDDIR)/stm32/series/f1/performance +LIBMAPLE_MODULE_SERIES := $(LIBMAPLE_PATH)/stm32f1 # Memory target-specific configuration values -- cgit v1.2.3 From a7652cebf2603007e01d3af166a5c17596e8f207 Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Tue, 29 Nov 2011 14:31:31 -0500 Subject: Add build support for targeting multiple STM32 series. Add an MCU_SERIES variable to each of the files under support/make/board-includes, which declares the series as "stm32f1" in each case. Use this in target-config.mk when determining LD_SERIES_PATH (with a hack since we only support performance line) and LIBMAPLE_MODULE_SERIES. We must move support/ld/stm32/series/f1 to .../series/stm32f1 as a side-effect. Adding support for other series (e.g. "stm32f2") should now be a matter of filling in the contents of libmaple// and support/ld/stm32// appropriately (along with moving the rest of the nonportable code out of the libmaple core and into the STM32F1 series submodule). Signed-off-by: Marti Bolivar --- .../stm32/series/f1/performance/vector_symbols.inc | 78 ---------------------- .../series/stm32f1/performance/vector_symbols.inc | 78 ++++++++++++++++++++++ support/make/board-includes/maple.mk | 1 + support/make/board-includes/maple_RET6.mk | 1 + support/make/board-includes/maple_mini.mk | 1 + support/make/board-includes/maple_native.mk | 1 + support/make/board-includes/olimex_stm32_h103.mk | 1 + support/make/target-config.mk | 13 ++-- 8 files changed, 90 insertions(+), 84 deletions(-) delete mode 100644 support/ld/stm32/series/f1/performance/vector_symbols.inc create mode 100644 support/ld/stm32/series/stm32f1/performance/vector_symbols.inc (limited to 'support/ld/stm32') diff --git a/support/ld/stm32/series/f1/performance/vector_symbols.inc b/support/ld/stm32/series/f1/performance/vector_symbols.inc deleted file mode 100644 index f8519bb..0000000 --- a/support/ld/stm32/series/f1/performance/vector_symbols.inc +++ /dev/null @@ -1,78 +0,0 @@ -EXTERN(__msp_init) -EXTERN(__exc_reset) -EXTERN(__exc_nmi) -EXTERN(__exc_hardfault) -EXTERN(__exc_memmanage) -EXTERN(__exc_busfault) -EXTERN(__exc_usagefault) -EXTERN(__stm32reservedexception7) -EXTERN(__stm32reservedexception8) -EXTERN(__stm32reservedexception9) -EXTERN(__stm32reservedexception10) -EXTERN(__exc_svc) -EXTERN(__exc_debug_monitor) -EXTERN(__stm32reservedexception13) -EXTERN(__exc_pendsv) -EXTERN(__exc_systick) - -EXTERN(__irq_wwdg) -EXTERN(__irq_pvd) -EXTERN(__irq_tamper) -EXTERN(__irq_rtc) -EXTERN(__irq_flash) -EXTERN(__irq_rcc) -EXTERN(__irq_exti0) -EXTERN(__irq_exti1) -EXTERN(__irq_exti2) -EXTERN(__irq_exti3) -EXTERN(__irq_exti4) -EXTERN(__irq_dma1_channel1) -EXTERN(__irq_dma1_channel2) -EXTERN(__irq_dma1_channel3) -EXTERN(__irq_dma1_channel4) -EXTERN(__irq_dma1_channel5) -EXTERN(__irq_dma1_channel6) -EXTERN(__irq_dma1_channel7) -EXTERN(__irq_adc) -EXTERN(__irq_usb_hp_can_tx) -EXTERN(__irq_usb_lp_can_rx0) -EXTERN(__irq_can_rx1) -EXTERN(__irq_can_sce) -EXTERN(__irq_exti9_5) -EXTERN(__irq_tim1_brk) -EXTERN(__irq_tim1_up) -EXTERN(__irq_tim1_trg_com) -EXTERN(__irq_tim1_cc) -EXTERN(__irq_tim2) -EXTERN(__irq_tim3) -EXTERN(__irq_tim4) -EXTERN(__irq_i2c1_ev) -EXTERN(__irq_i2c1_er) -EXTERN(__irq_i2c2_ev) -EXTERN(__irq_i2c2_er) -EXTERN(__irq_spi1) -EXTERN(__irq_spi2) -EXTERN(__irq_usart1) -EXTERN(__irq_usart2) -EXTERN(__irq_usart3) -EXTERN(__irq_exti15_10) -EXTERN(__irq_rtcalarm) -EXTERN(__irq_usbwakeup) - -EXTERN(__irq_tim8_brk) -EXTERN(__irq_tim8_up) -EXTERN(__irq_tim8_trg_com) -EXTERN(__irq_tim8_cc) -EXTERN(__irq_adc3) -EXTERN(__irq_fsmc) -EXTERN(__irq_sdio) -EXTERN(__irq_tim5) -EXTERN(__irq_spi3) -EXTERN(__irq_uart4) -EXTERN(__irq_uart5) -EXTERN(__irq_tim6) -EXTERN(__irq_tim7) -EXTERN(__irq_dma2_channel1) -EXTERN(__irq_dma2_channel2) -EXTERN(__irq_dma2_channel3) -EXTERN(__irq_dma2_channel4_5) diff --git a/support/ld/stm32/series/stm32f1/performance/vector_symbols.inc b/support/ld/stm32/series/stm32f1/performance/vector_symbols.inc new file mode 100644 index 0000000..f8519bb --- /dev/null +++ b/support/ld/stm32/series/stm32f1/performance/vector_symbols.inc @@ -0,0 +1,78 @@ +EXTERN(__msp_init) +EXTERN(__exc_reset) +EXTERN(__exc_nmi) +EXTERN(__exc_hardfault) +EXTERN(__exc_memmanage) +EXTERN(__exc_busfault) +EXTERN(__exc_usagefault) +EXTERN(__stm32reservedexception7) +EXTERN(__stm32reservedexception8) +EXTERN(__stm32reservedexception9) +EXTERN(__stm32reservedexception10) +EXTERN(__exc_svc) +EXTERN(__exc_debug_monitor) +EXTERN(__stm32reservedexception13) +EXTERN(__exc_pendsv) +EXTERN(__exc_systick) + +EXTERN(__irq_wwdg) +EXTERN(__irq_pvd) +EXTERN(__irq_tamper) +EXTERN(__irq_rtc) +EXTERN(__irq_flash) +EXTERN(__irq_rcc) +EXTERN(__irq_exti0) +EXTERN(__irq_exti1) +EXTERN(__irq_exti2) +EXTERN(__irq_exti3) +EXTERN(__irq_exti4) +EXTERN(__irq_dma1_channel1) +EXTERN(__irq_dma1_channel2) +EXTERN(__irq_dma1_channel3) +EXTERN(__irq_dma1_channel4) +EXTERN(__irq_dma1_channel5) +EXTERN(__irq_dma1_channel6) +EXTERN(__irq_dma1_channel7) +EXTERN(__irq_adc) +EXTERN(__irq_usb_hp_can_tx) +EXTERN(__irq_usb_lp_can_rx0) +EXTERN(__irq_can_rx1) +EXTERN(__irq_can_sce) +EXTERN(__irq_exti9_5) +EXTERN(__irq_tim1_brk) +EXTERN(__irq_tim1_up) +EXTERN(__irq_tim1_trg_com) +EXTERN(__irq_tim1_cc) +EXTERN(__irq_tim2) +EXTERN(__irq_tim3) +EXTERN(__irq_tim4) +EXTERN(__irq_i2c1_ev) +EXTERN(__irq_i2c1_er) +EXTERN(__irq_i2c2_ev) +EXTERN(__irq_i2c2_er) +EXTERN(__irq_spi1) +EXTERN(__irq_spi2) +EXTERN(__irq_usart1) +EXTERN(__irq_usart2) +EXTERN(__irq_usart3) +EXTERN(__irq_exti15_10) +EXTERN(__irq_rtcalarm) +EXTERN(__irq_usbwakeup) + +EXTERN(__irq_tim8_brk) +EXTERN(__irq_tim8_up) +EXTERN(__irq_tim8_trg_com) +EXTERN(__irq_tim8_cc) +EXTERN(__irq_adc3) +EXTERN(__irq_fsmc) +EXTERN(__irq_sdio) +EXTERN(__irq_tim5) +EXTERN(__irq_spi3) +EXTERN(__irq_uart4) +EXTERN(__irq_uart5) +EXTERN(__irq_tim6) +EXTERN(__irq_tim7) +EXTERN(__irq_dma2_channel1) +EXTERN(__irq_dma2_channel2) +EXTERN(__irq_dma2_channel3) +EXTERN(__irq_dma2_channel4_5) diff --git a/support/make/board-includes/maple.mk b/support/make/board-includes/maple.mk index 3c83ee7..a84f0ac 100644 --- a/support/make/board-includes/maple.mk +++ b/support/make/board-includes/maple.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOA ERROR_LED_PIN := 5 DENSITY := STM32_MEDIUM_DENSITY TARGET_FLAGS += -D$(DENSITY) +MCU_SERIES := stm32f1 diff --git a/support/make/board-includes/maple_RET6.mk b/support/make/board-includes/maple_RET6.mk index 3f61867..8bd9b90 100644 --- a/support/make/board-includes/maple_RET6.mk +++ b/support/make/board-includes/maple_RET6.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOA ERROR_LED_PIN := 5 DENSITY := STM32_HIGH_DENSITY TARGET_FLAGS += -D$(DENSITY) +MCU_SERIES := stm32f1 diff --git a/support/make/board-includes/maple_mini.mk b/support/make/board-includes/maple_mini.mk index b1afa4f..4a3e2ab 100644 --- a/support/make/board-includes/maple_mini.mk +++ b/support/make/board-includes/maple_mini.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOB ERROR_LED_PIN := 1 DENSITY := STM32_MEDIUM_DENSITY TARGET_FLAGS += -D$(DENSITY) +MCU_SERIES := stm32f1 diff --git a/support/make/board-includes/maple_native.mk b/support/make/board-includes/maple_native.mk index 555d71b..cd07c21 100644 --- a/support/make/board-includes/maple_native.mk +++ b/support/make/board-includes/maple_native.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOC ERROR_LED_PIN := 15 DENSITY := STM32_HIGH_DENSITY TARGET_FLAGS += -D$(DENSITY) +MCU_SERIES := stm32f1 diff --git a/support/make/board-includes/olimex_stm32_h103.mk b/support/make/board-includes/olimex_stm32_h103.mk index 6b45c17..1d84cc2 100644 --- a/support/make/board-includes/olimex_stm32_h103.mk +++ b/support/make/board-includes/olimex_stm32_h103.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOC ERROR_LED_PIN := 12 DENSITY := STM32_MEDIUM_DENSITY TARGET_FLAGS += -D$(DENSITY) +MCU_SERIES := stm32f1 diff --git a/support/make/target-config.mk b/support/make/target-config.mk index fcedd3e..48a33de 100644 --- a/support/make/target-config.mk +++ b/support/make/target-config.mk @@ -13,12 +13,13 @@ TARGET_FLAGS += -DBOARD_$(BOARD) -DMCU_$(MCU) \ # STM32 series-specific configuration values. -# NB: these only work for STM32F1 performance line chips, but those -# are the only ones we support at this time. If you add support for -# STM32F1 connectivity line MCUs or other STM32 families, this section -# will need to change. -LD_SERIES_PATH := $(LDDIR)/stm32/series/f1/performance -LIBMAPLE_MODULE_SERIES := $(LIBMAPLE_PATH)/stm32f1 +LD_SERIES_PATH := $(LDDIR)/stm32/series/$(MCU_SERIES) +ifeq ($(MCU_SERIES), stm32f1) + # Hack: force F1 to performance line; this will need to change if + # you add connectivity etc. line support. + LD_SERIES_PATH := $(LD_SERIES_PATH)/performance +endif +LIBMAPLE_MODULE_SERIES := $(LIBMAPLE_PATH)/$(MCU_SERIES) # Memory target-specific configuration values -- cgit v1.2.3 From 2173140656b28e60cabfddd808301df301e32cd5 Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Fri, 18 Nov 2011 19:58:59 -0500 Subject: support/ld: Add STM32F2 vector symbols. Signed-off-by: Marti Bolivar --- support/ld/stm32/series/stm32f2/vector_symbols.inc | 98 ++++++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 support/ld/stm32/series/stm32f2/vector_symbols.inc (limited to 'support/ld/stm32') diff --git a/support/ld/stm32/series/stm32f2/vector_symbols.inc b/support/ld/stm32/series/stm32f2/vector_symbols.inc new file mode 100644 index 0000000..d275ec3 --- /dev/null +++ b/support/ld/stm32/series/stm32f2/vector_symbols.inc @@ -0,0 +1,98 @@ +EXTERN(__msp_init) +EXTERN(__exc_reset) +EXTERN(__exc_nmi) +EXTERN(__exc_hardfault) +EXTERN(__exc_memmanage) +EXTERN(__exc_busfault) +EXTERN(__exc_usagefault) +EXTERN(__stm32reservedexception7) +EXTERN(__stm32reservedexception8) +EXTERN(__stm32reservedexception9) +EXTERN(__stm32reservedexception10) +EXTERN(__exc_svc) +EXTERN(__exc_debug_monitor) +EXTERN(__stm32reservedexception13) +EXTERN(__exc_pendsv) +EXTERN(__exc_systick) + +EXTERN(__irq_wwdg) +EXTERN(__irq_pvd) +EXTERN(__irq_tamp_stamp) +EXTERN(__irq_rtc_wkup) +EXTERN(__irq_flash) +EXTERN(__irq_rcc) +EXTERN(__irq_exti0) +EXTERN(__irq_exti1) +EXTERN(__irq_exti2) +EXTERN(__irq_exti3) +EXTERN(__irq_exti4) +EXTERN(__irq_dma1_stream0) +EXTERN(__irq_dma1_stream1) +EXTERN(__irq_dma1_stream2) +EXTERN(__irq_dma1_stream3) +EXTERN(__irq_dma1_stream4) +EXTERN(__irq_dma1_stream5) +EXTERN(__irq_dma1_stream6) +EXTERN(__irq_adc) +EXTERN(__irq_can1_tx) +EXTERN(__irq_can1_rx0) +EXTERN(__irq_can1_rx1) +EXTERN(__irq_can1_sce) +EXTERN(__irq_exti9_5) +EXTERN(__irq_tim1_brk_tim9) +EXTERN(__irq_tim1_up_tim10) +EXTERN(__irq_tim1_trg_com_tim11) +EXTERN(__irq_tim1_cc) +EXTERN(__irq_tim2) +EXTERN(__irq_tim3) +EXTERN(__irq_tim4) +EXTERN(__irq_i2c1_ev) +EXTERN(__irq_i2c1_er) +EXTERN(__irq_i2c2_ev) +EXTERN(__irq_i2c2_er) +EXTERN(__irq_spi1) +EXTERN(__irq_spi2) +EXTERN(__irq_usart1) +EXTERN(__irq_usart2) +EXTERN(__irq_usart3) +EXTERN(__irq_exti15_10) +EXTERN(__irq_rtc_alarm) +EXTERN(__irq_otg_fs_wkup) +EXTERN(__irq_tim8_brk_tim12) +EXTERN(__irq_tim8_up_tim13) +EXTERN(__irq_tim8_trg_com_tim14) +EXTERN(__irq_tim8_cc) +EXTERN(__irq_dma1_stream7) +EXTERN(__irq_fsmc) +EXTERN(__irq_sdio) +EXTERN(__irq_tim5) +EXTERN(__irq_spi3) +EXTERN(__irq_uart4) +EXTERN(__irq_uart5) +EXTERN(__irq_tim6_dac) +EXTERN(__irq_tim7) +EXTERN(__irq_dma2_stream0) +EXTERN(__irq_dma2_stream1) +EXTERN(__irq_dma2_stream2) +EXTERN(__irq_dma2_stream3) +EXTERN(__irq_dma2_stream4) +EXTERN(__irq_eth) +EXTERN(__irq_eth_wkup) +EXTERN(__irq_can2_tx) +EXTERN(__irq_can2_rx0) +EXTERN(__irq_can2_rx1) +EXTERN(__irq_can2_sce) +EXTERN(__irq_otg_fs) +EXTERN(__irq_dma2_stream5) +EXTERN(__irq_dma2_stream6) +EXTERN(__irq_dma2_stream7) +EXTERN(__irq_usart6) +EXTERN(__irq_i2c3_ev) +EXTERN(__irq_i2c3_er) +EXTERN(__irq_otg_hs_ep1_out) +EXTERN(__irq_otg_hs_ep1_in) +EXTERN(__irq_otg_hs_wkup) +EXTERN(__irq_otg_hs) +EXTERN(__irq_dcmi) +EXTERN(__irq_cryp) +EXTERN(__irq_hash_rng) -- cgit v1.2.3 From 378c3a70f81ddfbbddf3656977f81b7dfd8f96cd Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Sun, 3 Jun 2012 06:00:41 -0400 Subject: Slightly improve and generify the USB infrastructure. The good news is that and did turn out generic enough in what they specify to go on unchanged. However, we can't just go on assuming that there's USB just because we're on an F1. Now that there's value line in the tree, we need to be more careful (value line F1s don't have USB peripherals). To that end, make all the F1 board-includes/*.mk files specify what line their MCU is with an MCU_F1_LINE variable. Use that to hack libmaple/usb/rules.mk so we only try to build the USB module under appropriate circumstances. While we're at it, add a vector_symbols.inc for value line MCUs under support/ld/. We need this to get the target-config.mk modifications implied by the addition of MCU_F1_LINE. We'll fix up some other performance-line-isms under libmaple/stm32f1 in a separate commit. Also in libmaple/usb/: - Move everything into a new stm32f1 directory. Due to aforementioned rules.mk hacks, there is no immediate need for an stm32f2 directory (USB support doesn't exist there). - Update the README for style and content. Signed-off-by: Marti Bolivar --- Makefile | 2 +- libmaple/include/libmaple/usb.h | 2 +- libmaple/usb/README | 69 +- libmaple/usb/rules.mk | 27 +- libmaple/usb/stm32f1/usb.c | 381 +++++++++++ libmaple/usb/stm32f1/usb_cdcacm.c | 762 +++++++++++++++++++++ libmaple/usb/stm32f1/usb_descriptors.h | 148 ++++ libmaple/usb/stm32f1/usb_lib_globals.h | 55 ++ libmaple/usb/stm32f1/usb_reg_map.c | 79 +++ libmaple/usb/stm32f1/usb_reg_map.h | 433 ++++++++++++ libmaple/usb/usb.c | 381 ----------- libmaple/usb/usb_cdcacm.c | 762 --------------------- libmaple/usb/usb_descriptors.h | 148 ---- libmaple/usb/usb_lib_globals.h | 55 -- libmaple/usb/usb_reg_map.c | 79 --- libmaple/usb/usb_reg_map.h | 433 ------------ .../stm32/series/stm32f1/value/vector_symbols.inc | 78 +++ support/make/board-includes/VLDiscovery.mk | 1 + support/make/board-includes/maple.mk | 1 + support/make/board-includes/maple_RET6.mk | 1 + support/make/board-includes/maple_mini.mk | 1 + support/make/board-includes/maple_native.mk | 1 + support/make/board-includes/olimex_stm32_h103.mk | 1 + support/make/target-config.mk | 6 +- wirish/include/wirish/usb_serial.h | 5 +- wirish/rules.mk | 4 +- wirish/stm32f1/boards_setup.cpp | 10 +- wirish/usb_serial.cpp | 9 + 28 files changed, 2015 insertions(+), 1919 deletions(-) create mode 100644 libmaple/usb/stm32f1/usb.c create mode 100644 libmaple/usb/stm32f1/usb_cdcacm.c create mode 100644 libmaple/usb/stm32f1/usb_descriptors.h create mode 100644 libmaple/usb/stm32f1/usb_lib_globals.h create mode 100644 libmaple/usb/stm32f1/usb_reg_map.c create mode 100644 libmaple/usb/stm32f1/usb_reg_map.h delete mode 100644 libmaple/usb/usb.c delete mode 100644 libmaple/usb/usb_cdcacm.c delete mode 100644 libmaple/usb/usb_descriptors.h delete mode 100644 libmaple/usb/usb_lib_globals.h delete mode 100644 libmaple/usb/usb_reg_map.c delete mode 100644 libmaple/usb/usb_reg_map.h create mode 100644 support/ld/stm32/series/stm32f1/value/vector_symbols.inc (limited to 'support/ld/stm32') diff --git a/Makefile b/Makefile index 0784644..e3a1e4f 100644 --- a/Makefile +++ b/Makefile @@ -75,7 +75,7 @@ ifeq ($(LIBMAPLE_MODULES),) else LIBMAPLE_MODULES += $(SRCROOT)/libmaple endif -# LIBMAPLE_MODULES += $(SRCROOT)/libmaple/usb # USB FS device +LIBMAPLE_MODULES += $(SRCROOT)/libmaple/usb # The USB module is kept separate LIBMAPLE_MODULES += $(LIBMAPLE_MODULE_SERIES) # STM32 series submodule in libmaple LIBMAPLE_MODULES += $(SRCROOT)/wirish # Official libraries: diff --git a/libmaple/include/libmaple/usb.h b/libmaple/include/libmaple/usb.h index 82bace9..8555aca 100644 --- a/libmaple/include/libmaple/usb.h +++ b/libmaple/include/libmaple/usb.h @@ -1,7 +1,7 @@ /****************************************************************************** * The MIT License * - * Copyright (c) 2010 LeafLabs LLC. + * Copyright (c) 2010, 2011 LeafLabs LLC. * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation diff --git a/libmaple/usb/README b/libmaple/usb/README index 2c55364..d0fca8d 100644 --- a/libmaple/usb/README +++ b/libmaple/usb/README @@ -1,35 +1,24 @@ -The USB submodule of libmaple is responsible for: - - Initializing the USB peripheral, scaling the peripheral clocks - appropriately, enabling the interrupt channels to USB, defining - the USB IRQ, resetting the USB DISC pin (used to tell the host - were alive). Additionally, the USB submodule defines the virtual - COM port interface that is exposed to user sketches via SerialUSB. - -To use it: - - SerialUSB.print/ln, available(), read(), write() implement the same - interface as Serial1/2/3. +The USB submodule of libmaple is a separate piece of the codebase for +reasons that are largely historical. Current Status: - Currently, the USB submodule relies on the low level core library - provided by ST to implement the USB transfer protocol for control - endpoint transfers. The high level virtual com port application - is unfortunately hard to untangle from this low level dependence, - and when a new USB core library is written (to nix ST dependence) - changes will likely have to be made to virtual com application - code. Ideally, the new core library should mimic the form of MyUSB - (LUFA), since this library (USB for AVR) is growing in popularity - and in example applications. + There's only support for the USB device peripheral found on + STM32F103s. - The virtual com port serves two important purposes. + We rely on the low level core library provided by ST to implement + the USB transfer protocol for control endpoint transfers. - 1) It allows serial data transfers between user sketches an a - host computer. + The virtual com port (which is exposed via + ) serves two important purposes. - 2) It allows the host machine to issue a system reset by - asserting the DTR signal. + 1) It allows serial data transfers between user sketches an a + host computer. + + 2) It allows the host PC to issue a system reset into the DFU + bootloader with the DTR + RTS + "1EAF" sequence (see + leaflabs.com/docs/bootloader.html for more information on + this). After reset, Maple will run the DFU bootloader for a few seconds, during which the user can begin a DFU upload operation (uploads @@ -38,11 +27,11 @@ Current Status: the chip in order to enable the bootloader. If you would like to develop your own USB application for whatever - reason (uses faster isochronous enpoints for streaming audio, or - implements the USB HID or Mass Storage specs for examples) then + reason (e.g. to use faster isochronous enpoints for streaming + audio, or implement the USB HID or Mass Storage specs), then ensure that you leave some hook for resetting Maple remotely in - order to spin up the DFU bootloader. Please make sure to give - yourself a unique vendor/product ID pair in your application, as + order to spin up the DFU bootloader. Please make sure to get + yourself a unique vendor/product ID pair for your application, as some operating systems will assign a host-side driver based on these tags. @@ -52,21 +41,23 @@ Current Status: be a burden from the host driver side, as Windows and *nix handle compound USB devices quite differently. - Be mindful that enabling the USB peripheral isnt "free." The + Be mindful that enabling the USB peripheral isn't "free." The device must respond to periodic bus activity (every few milliseconds) by servicing an ISR. Therefore, the USB application - should be disabled inside of timing critical applications. In - order to disconnect the device from the host, the USB_DISC pin can - be asserted (on Maple this is GPIO C12). Alternatively, the NVIC + should be disabled inside of timing critical applications. + + In order to disconnect the device from the host, a USB_DISC pin is + asserted (e.g. on Maple, this is PC12). Alternatively, the NVIC can be directly configured to disable the USB LP/HP IRQ's. The files inside of usb_lib were provided by ST and are subject to their own license, all other files were written by the LeafLabs team and fall under the MIT license. -Todo: +TODO: - - write custom low level USB stack to strip out any remaining - dependence on ST code - - add a high level USB application library that would allow users - to make their own HID/Mass Storage/Audio/Video devices. + - Generic USB driver core with series-provided backends, like + libopencm3 has. + - Strip out ST code. + - Integration with a high level USB library (like LUFA/MyUSB) to + allow users to write custom USB applications. diff --git a/libmaple/usb/rules.mk b/libmaple/usb/rules.mk index 816fad6..e8ccc15 100644 --- a/libmaple/usb/rules.mk +++ b/libmaple/usb/rules.mk @@ -3,20 +3,29 @@ sp := $(sp).x dirstack_$(sp) := $(d) d := $(dir) BUILDDIRS += $(BUILD_PATH)/$(d) -BUILDDIRS += $(BUILD_PATH)/$(d)/usb_lib # Local flags -CFLAGS_$(d) = -I$(d) -I$(d)/usb_lib $(LIBMAPLE_INCLUDES) $(LIBMAPLE_PRIVATE_INCLUDES) -Wall +CFLAGS_$(d) = -I$(d) -I$(d)/$(MCU_SERIES) -I$(d)/usb_lib $(LIBMAPLE_INCLUDES) $(LIBMAPLE_PRIVATE_INCLUDES) -Wall + +# Add usblib and series subdirectory to BUILDDIRS. +BUILDDIRS += $(BUILD_PATH)/$(d)/$(MCU_SERIES) +BUILDDIRS += $(BUILD_PATH)/$(d)/usb_lib # Local rules and targets sSRCS_$(d) := -cSRCS_$(d) := usb.c \ - usb_reg_map.c \ - usb_cdcacm.c \ - usb_lib/usb_core.c \ - usb_lib/usb_init.c \ - usb_lib/usb_mem.c \ - usb_lib/usb_regs.c +cSRCS_$(d) := +# We currently only have F1 performance line support. Sigh. +ifeq ($(MCU_SERIES), stm32f1) +ifeq ($(MCU_F1_LINE), performance) +cSRCS_$(d) += $(MCU_SERIES)/usb.c +cSRCS_$(d) += $(MCU_SERIES)/usb_reg_map.c +cSRCS_$(d) += $(MCU_SERIES)/usb_cdcacm.c +cSRCS_$(d) += usb_lib/usb_core.c +cSRCS_$(d) += usb_lib/usb_init.c +cSRCS_$(d) += usb_lib/usb_mem.c +cSRCS_$(d) += usb_lib/usb_regs.c +endif +endif sFILES_$(d) := $(sSRCS_$(d):%=$(d)/%) cFILES_$(d) := $(cSRCS_$(d):%=$(d)/%) diff --git a/libmaple/usb/stm32f1/usb.c b/libmaple/usb/stm32f1/usb.c new file mode 100644 index 0000000..0130bab --- /dev/null +++ b/libmaple/usb/stm32f1/usb.c @@ -0,0 +1,381 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 LeafLabs LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/usb/usb.c + * @brief USB support. + * + * This is a mess. What we need almost amounts to a ground-up rewrite. + */ + +#include + +#include +#include + +/* Private headers */ +#include "usb_reg_map.h" +#include "usb_lib_globals.h" + +/* usb_lib headers */ +#include "usb_type.h" +#include "usb_core.h" + +static void dispatch_ctr_lp(void); + +/* + * usb_lib/ globals + */ + +uint16 SaveTState; /* caches TX status for later use */ +uint16 SaveRState; /* caches RX status for later use */ + +/* + * Other state + */ + +typedef enum { + RESUME_EXTERNAL, + RESUME_INTERNAL, + RESUME_LATER, + RESUME_WAIT, + RESUME_START, + RESUME_ON, + RESUME_OFF, + RESUME_ESOF +} RESUME_STATE; + +struct { + volatile RESUME_STATE eState; + volatile uint8 bESOFcnt; +} ResumeS; + +static usblib_dev usblib = { + .irq_mask = USB_ISR_MSK, + .state = USB_UNCONNECTED, + .clk_id = RCC_USB, +}; +usblib_dev *USBLIB = &usblib; + +/* + * Routines + */ + +void usb_init_usblib(usblib_dev *dev, + void (**ep_int_in)(void), + void (**ep_int_out)(void)) { + rcc_clk_enable(dev->clk_id); + + dev->ep_int_in = ep_int_in; + dev->ep_int_out = ep_int_out; + + /* usb_lib/ declares both and then assumes that pFoo points to Foo + * (even though the names don't always match), which is stupid for + * all of the obvious reasons, but whatever. Here we are. */ + pInformation = &Device_Info; + pProperty = &Device_Property; + pUser_Standard_Requests = &User_Standard_Requests; + + pInformation->ControlState = 2; /* FIXME [0.0.12] use + CONTROL_STATE enumerator */ + pProperty->Init(); +} + +static void usb_suspend(void) { + uint16 cntr; + + /* TODO decide if read/modify/write is really what we want + * (e.g. usb_resume_init() reconfigures CNTR). */ + cntr = USB_BASE->CNTR; + cntr |= USB_CNTR_FSUSP; + USB_BASE->CNTR = cntr; + cntr |= USB_CNTR_LP_MODE; + USB_BASE->CNTR = cntr; + + USBLIB->state = USB_SUSPENDED; +} + +static void usb_resume_init(void) { + uint16 cntr; + + cntr = USB_BASE->CNTR; + cntr &= ~USB_CNTR_LP_MODE; + USB_BASE->CNTR = cntr; + + /* Enable interrupt lines */ + USB_BASE->CNTR = USB_ISR_MSK; +} + +static void usb_resume(RESUME_STATE eResumeSetVal) { + uint16 cntr; + + if (eResumeSetVal != RESUME_ESOF) + ResumeS.eState = eResumeSetVal; + + switch (ResumeS.eState) + { + case RESUME_EXTERNAL: + usb_resume_init(); + ResumeS.eState = RESUME_OFF; + break; + case RESUME_INTERNAL: + usb_resume_init(); + ResumeS.eState = RESUME_START; + break; + case RESUME_LATER: + ResumeS.bESOFcnt = 2; + ResumeS.eState = RESUME_WAIT; + break; + case RESUME_WAIT: + ResumeS.bESOFcnt--; + if (ResumeS.bESOFcnt == 0) + ResumeS.eState = RESUME_START; + break; + case RESUME_START: + cntr = USB_BASE->CNTR; + cntr |= USB_CNTR_RESUME; + USB_BASE->CNTR = cntr; + ResumeS.eState = RESUME_ON; + ResumeS.bESOFcnt = 10; + break; + case RESUME_ON: + ResumeS.bESOFcnt--; + if (ResumeS.bESOFcnt == 0) { + cntr = USB_BASE->CNTR; + cntr &= ~USB_CNTR_RESUME; + USB_BASE->CNTR = cntr; + ResumeS.eState = RESUME_OFF; + } + break; + case RESUME_OFF: + case RESUME_ESOF: + default: + ResumeS.eState = RESUME_OFF; + break; + } +} + +#define SUSPEND_ENABLED 1 +void __irq_usb_lp_can_rx0(void) { + uint16 istr = USB_BASE->ISTR; + + /* Use USB_ISR_MSK to only include code for bits we care about. */ + +#if (USB_ISR_MSK & USB_ISTR_RESET) + if (istr & USB_ISTR_RESET & USBLIB->irq_mask) { + USB_BASE->ISTR = ~USB_ISTR_RESET; + pProperty->Reset(); + } +#endif + +#if (USB_ISR_MSK & USB_ISTR_PMAOVR) + if (istr & ISTR_PMAOVR & USBLIB->irq_mask) { + USB_BASE->ISTR = ~USB_ISTR_PMAOVR; + } +#endif + +#if (USB_ISR_MSK & USB_ISTR_ERR) + if (istr & USB_ISTR_ERR & USBLIB->irq_mask) { + USB_BASE->ISTR = ~USB_ISTR_ERR; + } +#endif + +#if (USB_ISR_MSK & USB_ISTR_WKUP) + if (istr & USB_ISTR_WKUP & USBLIB->irq_mask) { + USB_BASE->ISTR = ~USB_ISTR_WKUP; + usb_resume(RESUME_EXTERNAL); + } +#endif + +#if (USB_ISR_MSK & USB_ISTR_SUSP) + if (istr & USB_ISTR_SUSP & USBLIB->irq_mask) { + /* check if SUSPEND is possible */ + if (SUSPEND_ENABLED) { + usb_suspend(); + } else { + /* if not possible then resume after xx ms */ + usb_resume(RESUME_LATER); + } + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + USB_BASE->ISTR = ~USB_ISTR_SUSP; +} +#endif + +#if (USB_ISR_MSK & USB_ISTR_SOF) + if (istr & USB_ISTR_SOF & USBLIB->irq_mask) { + USB_BASE->ISTR = ~USB_ISTR_SOF; + } +#endif + +#if (USB_ISR_MSK & USB_ISTR_ESOF) + if (istr & USB_ISTR_ESOF & USBLIB->irq_mask) { + USB_BASE->ISTR = ~USB_ISTR_ESOF; + /* resume handling timing is made with ESOFs */ + usb_resume(RESUME_ESOF); /* request without change of the machine state */ + } +#endif + + /* + * Service the correct transfer interrupt. + */ + +#if (USB_ISR_MSK & USB_ISTR_CTR) + if (istr & USB_ISTR_CTR & USBLIB->irq_mask) { + dispatch_ctr_lp(); + } +#endif +} + +/* + * Auxiliary routines + */ + +static inline uint8 dispatch_endpt_zero(uint16 istr_dir); +static inline void dispatch_endpt(uint8 ep); +static inline void set_rx_tx_status0(uint16 rx, uint16 tx); + +static void handle_setup0(void); +static void handle_in0(void); +static void handle_out0(void); + +static void dispatch_ctr_lp() { + uint16 istr; + while (((istr = USB_BASE->ISTR) & USB_ISTR_CTR) != 0) { + /* TODO WTF, figure this out: RM0008 says CTR is read-only, + * but ST's firmware claims it's clear-only, and emphasizes + * the importance of clearing it in more than one place. */ + USB_BASE->ISTR = ~USB_ISTR_CTR; + uint8 ep_id = istr & USB_ISTR_EP_ID; + if (ep_id == 0) { + /* TODO figure out why it's OK to break out of the loop + * once we're done serving endpoint zero, but not okay if + * there are multiple nonzero endpoint transfers to + * handle. */ + if (dispatch_endpt_zero(istr & USB_ISTR_DIR)) + return; + } else { + dispatch_endpt(ep_id); + } + } +} + +/* FIXME Dataflow on endpoint 0 RX/TX status is based off of ST's + * code, and is ugly/confusing in its use of SaveRState/SaveTState. + * Fixing this requires filling in handle_in0(), handle_setup0(), + * handle_out0(). */ +static inline uint8 dispatch_endpt_zero(uint16 istr_dir) { + uint32 epr = (uint16)USB_BASE->EP[0]; + + if (!(epr & (USB_EP_CTR_TX | USB_EP_SETUP | USB_EP_CTR_RX))) { + return 0; + } + + /* Cache RX/TX statuses in SaveRState/SaveTState, respectively. + * The various handle_foo0() may clobber these values + * before we reset them at the end of this routine. */ + SaveRState = epr & USB_EP_STAT_RX; + SaveTState = epr & USB_EP_STAT_TX; + + /* Set actual RX/TX statuses to NAK while we're thinking */ + set_rx_tx_status0(USB_EP_STAT_RX_NAK, USB_EP_STAT_TX_NAK); + + if (istr_dir == 0) { + /* ST RM0008: "If DIR bit=0, CTR_TX bit is set in the USB_EPnR + * register related to the interrupting endpoint. The + * interrupting transaction is of IN type (data transmitted by + * the USB peripheral to the host PC)." */ + ASSERT_FAULT(epr & USB_EP_CTR_TX); + usb_clear_ctr_tx(USB_EP0); + handle_in0(); + } else { + /* RM0008: "If DIR bit=1, CTR_RX bit or both CTR_TX/CTR_RX + * are set in the USB_EPnR register related to the + * interrupting endpoint. The interrupting transaction is of + * OUT type (data received by the USB peripheral from the host + * PC) or two pending transactions are waiting to be + * processed." + * + * [mbolivar] Note how the following control flow (which + * replicates ST's) doesn't seem to actually handle both + * interrupts that are ostensibly pending when both CTR_RX and + * CTR_TX are set. + * + * TODO sort this mess out. + */ + if (epr & USB_EP_CTR_TX) { + usb_clear_ctr_tx(USB_EP0); + handle_in0(); + } else { /* SETUP or CTR_RX */ + /* SETUP is held constant while CTR_RX is set, so clear it + * either way */ + usb_clear_ctr_rx(USB_EP0); + if (epr & USB_EP_SETUP) { + handle_setup0(); + } else { /* CTR_RX */ + handle_out0(); + } + } + } + + set_rx_tx_status0(SaveRState, SaveTState); + return 1; +} + +static inline void dispatch_endpt(uint8 ep) { + uint32 epr = USB_BASE->EP[ep]; + /* If ISTR_CTR is set and the ISTR gave us this EP_ID to handle, + * then presumably at least one of CTR_RX and CTR_TX is set, but + * again, ST's control flow allows for the possibility of neither. + * + * TODO try to find out if neither being set is possible. */ + if (epr & USB_EP_CTR_RX) { + usb_clear_ctr_rx(ep); + (USBLIB->ep_int_out[ep - 1])(); + } + if (epr & USB_EP_CTR_TX) { + usb_clear_ctr_tx(ep); + (USBLIB->ep_int_in[ep - 1])(); + } +} + +static inline void set_rx_tx_status0(uint16 rx, uint16 tx) { + usb_set_ep_rx_stat(USB_EP0, rx); + usb_set_ep_tx_stat(USB_EP0, tx); +} + +/* TODO Rip out usb_lib/ dependency from the following functions: */ + +static void handle_setup0(void) { + Setup0_Process(); +} + +static void handle_in0(void) { + In0_Process(); +} + +static void handle_out0(void) { + Out0_Process(); +} diff --git a/libmaple/usb/stm32f1/usb_cdcacm.c b/libmaple/usb/stm32f1/usb_cdcacm.c new file mode 100644 index 0000000..6ef4806 --- /dev/null +++ b/libmaple/usb/stm32f1/usb_cdcacm.c @@ -0,0 +1,762 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file libmaple/usb/usb_cdcacm.c + * @brief USB CDC ACM (a.k.a. virtual serial terminal, VCOM). + * + * FIXME: this works on the STM32F1 USB peripherals, and probably no + * place else. Nonportable bits really need to be factored out, and + * the result made cleaner. + */ + +#include + +#include +#include +#include + +/* Private headers */ +#include "usb_descriptors.h" +#include "usb_lib_globals.h" +#include "usb_reg_map.h" + +/* usb_lib headers */ +#include "usb_type.h" +#include "usb_core.h" +#include "usb_def.h" + +/****************************************************************************** + ****************************************************************************** + *** + *** HACK ALERT! FIXME FIXME FIXME FIXME! + *** + *** A bunch of LeafLabs-specific configuration lives in here for + *** now. This mess REALLY needs to get teased apart, with + *** appropriate pieces moved into Wirish. + *** + ****************************************************************************** + *****************************************************************************/ + +#if !(defined(BOARD_maple) || defined(BOARD_maple_RET6) || \ + defined(BOARD_maple_mini) || defined(BOARD_maple_native)) +#warning USB CDC ACM relies on LeafLabs board-specific configuration.\ + You may have problems on non-LeafLabs boards. +#endif + +static void vcomDataTxCb(void); +static void vcomDataRxCb(void); +static uint8* vcomGetSetLineCoding(uint16); + +static void usbInit(void); +static void usbReset(void); +static RESULT usbDataSetup(uint8 request); +static RESULT usbNoDataSetup(uint8 request); +static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting); +static uint8* usbGetDeviceDescriptor(uint16 length); +static uint8* usbGetConfigDescriptor(uint16 length); +static uint8* usbGetStringDescriptor(uint16 length); +static void usbSetConfiguration(void); +static void usbSetDeviceAddress(void); + +static void wait_reset(void); + +/* + * VCOM config + */ + +#define VCOM_CTRL_EPNUM 0x00 +#define VCOM_CTRL_RX_ADDR 0x40 +#define VCOM_CTRL_TX_ADDR 0x80 +#define VCOM_CTRL_EPSIZE 0x40 + +#define VCOM_TX_ENDP 1 +#define VCOM_TX_EPNUM 0x01 +#define VCOM_TX_ADDR 0xC0 +#define VCOM_TX_EPSIZE 0x40 + +#define VCOM_NOTIFICATION_ENDP 2 +#define VCOM_NOTIFICATION_EPNUM 0x02 +#define VCOM_NOTIFICATION_ADDR 0x100 +#define VCOM_NOTIFICATION_EPSIZE 0x40 + +#define VCOM_RX_ENDP 3 +#define VCOM_RX_EPNUM 0x03 +#define VCOM_RX_ADDR 0x110 +#define VCOM_RX_EPSIZE 0x40 +#define VCOM_RX_BUFLEN (VCOM_RX_EPSIZE*3) + +/* + * CDC ACM Requests + */ + +#define SET_LINE_CODING 0x20 +#define GET_LINE_CODING 0x21 +#define SET_COMM_FEATURE 0x02 +#define SET_CONTROL_LINE_STATE 0x22 +#define CONTROL_LINE_DTR (0x01) +#define CONTROL_LINE_RTS (0x02) + +/* + * Descriptors + */ + +#define USB_DEVICE_CLASS_CDC 0x02 +#define USB_DEVICE_SUBCLASS_CDC 0x00 +#define LEAFLABS_ID_VENDOR 0x1EAF +#define MAPLE_ID_PRODUCT 0x0004 +const USB_Descriptor_Device usbVcomDescriptor_Device = { + .bLength = sizeof(USB_Descriptor_Device), + .bDescriptorType = USB_DESCRIPTOR_TYPE_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = USB_DEVICE_CLASS_CDC, + .bDeviceSubClass = USB_DEVICE_SUBCLASS_CDC, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = 0x40, + .idVendor = LEAFLABS_ID_VENDOR, + .idProduct = MAPLE_ID_PRODUCT, + .bcdDevice = 0x0200, + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x00, + .bNumConfigurations = 0x01, +}; + +#define MAX_POWER (100 >> 1) +const USB_Descriptor_Config usbVcomDescriptor_Config = { + .Config_Header = { + .bLength = sizeof(USB_Descriptor_Config_Header), + .bDescriptorType = USB_DESCRIPTOR_TYPE_CONFIGURATION, + .wTotalLength = sizeof(USB_Descriptor_Config), + .bNumInterfaces = 0x02, + .bConfigurationValue = 0x01, + .iConfiguration = 0x00, + .bmAttributes = (USB_CONFIG_ATTR_BUSPOWERED | + USB_CONFIG_ATTR_SELF_POWERED), + .bMaxPower = MAX_POWER, + }, + + .CCI_Interface = { + .bLength = sizeof(USB_Descriptor_Interface), + .bDescriptorType = USB_DESCRIPTOR_TYPE_INTERFACE, + .bInterfaceNumber = 0x00, + .bAlternateSetting = 0x00, + .bNumEndpoints = 0x01, + .bInterfaceClass = USB_INTERFACE_CLASS_CDC, + .bInterfaceSubClass = USB_INTERFACE_SUBCLASS_CDC_ACM, + .bInterfaceProtocol = 0x01, /* Common AT Commands */ + .iInterface = 0x00, + }, + + .CDC_Functional_IntHeader = { + .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), + .bDescriptorType = 0x24, + .SubType = 0x00, + .Data = {0x01, 0x10}, + }, + + .CDC_Functional_CallManagement = { + .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), + .bDescriptorType = 0x24, + .SubType = 0x01, + .Data = {0x03, 0x01}, + }, + + .CDC_Functional_ACM = { + .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(1), + .bDescriptorType = 0x24, + .SubType = 0x02, + .Data = {0x06}, + }, + + .CDC_Functional_Union = { + .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), + .bDescriptorType = 0x24, + .SubType = 0x06, + .Data = {0x00, 0x01}, + }, + + .ManagementEndpoint = { + .bLength = sizeof(USB_Descriptor_Endpoint), + .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, + .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN | + VCOM_NOTIFICATION_EPNUM), + .bmAttributes = EP_TYPE_INTERRUPT, + .wMaxPacketSize = VCOM_NOTIFICATION_EPSIZE, + .bInterval = 0xFF, + }, + + .DCI_Interface = { + .bLength = sizeof(USB_Descriptor_Interface), + .bDescriptorType = USB_DESCRIPTOR_TYPE_INTERFACE, + .bInterfaceNumber = 0x01, + .bAlternateSetting = 0x00, + .bNumEndpoints = 0x02, + .bInterfaceClass = USB_INTERFACE_CLASS_DIC, + .bInterfaceSubClass = 0x00, /* None */ + .bInterfaceProtocol = 0x00, /* None */ + .iInterface = 0x00, + }, + + .DataOutEndpoint = { + .bLength = sizeof(USB_Descriptor_Endpoint), + .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, + .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_OUT | VCOM_RX_EPNUM), + .bmAttributes = EP_TYPE_BULK, + .wMaxPacketSize = VCOM_RX_EPSIZE, + .bInterval = 0x00, + }, + + .DataInEndpoint = { + .bLength = sizeof(USB_Descriptor_Endpoint), + .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, + .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN | VCOM_TX_EPNUM), + .bmAttributes = EP_TYPE_BULK, + .wMaxPacketSize = VCOM_TX_EPSIZE, + .bInterval = 0x00, + }, +}; + +/* + String Identifiers: + + we may choose to specify any or none of the following string + identifiers: + + iManufacturer: LeafLabs + iProduct: Maple + iSerialNumber: NONE + iConfiguration: NONE + iInterface(CCI): NONE + iInterface(DCI): NONE + + additionally we must provide the unicode language identifier, + which is 0x0409 for US English +*/ + +const uint8 usbVcomDescriptor_LangID[USB_DESCRIPTOR_STRING_LEN(1)] = { + USB_DESCRIPTOR_STRING_LEN(1), + USB_DESCRIPTOR_TYPE_STRING, + 0x09, + 0x04, +}; + +const uint8 usbVcomDescriptor_iManufacturer[USB_DESCRIPTOR_STRING_LEN(8)] = { + USB_DESCRIPTOR_STRING_LEN(8), + USB_DESCRIPTOR_TYPE_STRING, + 'L', 0, 'e', 0, 'a', 0, 'f', 0, + 'L', 0, 'a', 0, 'b', 0, 's', 0, +}; + +const uint8 usbVcomDescriptor_iProduct[USB_DESCRIPTOR_STRING_LEN(8)] = { + USB_DESCRIPTOR_STRING_LEN(8), + USB_DESCRIPTOR_TYPE_STRING, + 'M', 0, 'a', 0, 'p', 0, 'l', 0, + 'e', 0, ' ', 0, ' ', 0, ' ', 0 +}; + +ONE_DESCRIPTOR Device_Descriptor = { + (uint8*)&usbVcomDescriptor_Device, + sizeof(USB_Descriptor_Device) +}; + +ONE_DESCRIPTOR Config_Descriptor = { + (uint8*)&usbVcomDescriptor_Config, + sizeof(USB_Descriptor_Config) +}; + +ONE_DESCRIPTOR String_Descriptor[3] = { + {(uint8*)&usbVcomDescriptor_LangID, USB_DESCRIPTOR_STRING_LEN(1)}, + {(uint8*)&usbVcomDescriptor_iManufacturer,USB_DESCRIPTOR_STRING_LEN(8)}, + {(uint8*)&usbVcomDescriptor_iProduct, USB_DESCRIPTOR_STRING_LEN(8)} +}; + +/* + * Etc. + */ + +typedef enum { + DTR_UNSET, + DTR_HIGH, + DTR_NEGEDGE, + DTR_LOW +} RESET_STATE; + +typedef struct { + uint32 bitrate; + uint8 format; + uint8 paritytype; + uint8 datatype; +} USB_Line_Coding; + +uint8 last_request = 0; +USB_Line_Coding line_coding = { + .bitrate = 115200, + .format = 0x00, /* stop bits-1 */ + .paritytype = 0x00, + .datatype = 0x08 +}; +uint8 vcomBufferRx[VCOM_RX_BUFLEN]; +volatile uint32 countTx = 0; +volatile uint32 recvBufIn = 0; +volatile uint32 recvBufOut = 0; +volatile uint32 maxNewBytes = VCOM_RX_BUFLEN; +volatile uint32 newBytes = 0; +RESET_STATE reset_state = DTR_UNSET; +uint8 line_dtr_rts = 0; + +/* + * Endpoint callbacks + */ + +static void (*ep_int_in[7])(void) = + {vcomDataTxCb, + NOP_Process, + NOP_Process, + NOP_Process, + NOP_Process, + NOP_Process, + NOP_Process}; + +static void (*ep_int_out[7])(void) = + {NOP_Process, + NOP_Process, + vcomDataRxCb, + NOP_Process, + NOP_Process, + NOP_Process, + NOP_Process}; + +/* + * Globals required by usb_lib/ + */ + +#define NUM_ENDPTS 0x04 +DEVICE Device_Table = { + .Total_Endpoint = NUM_ENDPTS, + .Total_Configuration = 1 +}; + +#define MAX_PACKET_SIZE 0x40 /* 64B, maximum for USB FS Devices */ +DEVICE_PROP Device_Property = { + .Init = usbInit, + .Reset = usbReset, + .Process_Status_IN = NOP_Process, + .Process_Status_OUT = NOP_Process, + .Class_Data_Setup = usbDataSetup, + .Class_NoData_Setup = usbNoDataSetup, + .Class_Get_Interface_Setting = usbGetInterfaceSetting, + .GetDeviceDescriptor = usbGetDeviceDescriptor, + .GetConfigDescriptor = usbGetConfigDescriptor, + .GetStringDescriptor = usbGetStringDescriptor, + .RxEP_buffer = NULL, + .MaxPacketSize = MAX_PACKET_SIZE +}; + +USER_STANDARD_REQUESTS User_Standard_Requests = { + .User_GetConfiguration = NOP_Process, + .User_SetConfiguration = usbSetConfiguration, + .User_GetInterface = NOP_Process, + .User_SetInterface = NOP_Process, + .User_GetStatus = NOP_Process, + .User_ClearFeature = NOP_Process, + .User_SetEndPointFeature = NOP_Process, + .User_SetDeviceFeature = NOP_Process, + .User_SetDeviceAddress = usbSetDeviceAddress +}; + +/* + * CDC ACM interface + */ + +void usb_cdcacm_enable(gpio_dev *disc_dev, uint8 disc_bit) { + /* Present ourselves to the host */ + gpio_set_mode(disc_dev, disc_bit, GPIO_OUTPUT_PP); + gpio_write_bit(disc_dev, disc_bit, 0); // presents us to the host + + /* initialize USB peripheral */ + usb_init_usblib(USBLIB, ep_int_in, ep_int_out); +} + +void usb_cdcacm_disable(gpio_dev *disc_dev, uint8 disc_bit) { + // These are just guesses about how to do this, but it seems to work. + // TODO: verify this with USB spec + nvic_irq_disable(NVIC_USB_LP_CAN_RX0); + gpio_write_bit(disc_dev, disc_bit, 1); +} + +void usb_cdcacm_putc(char ch) { + while (!usb_cdcacm_tx((uint8*)&ch, 1)) + ; +} + +/* This function is non-blocking. + * + * It copies data from a usercode buffer into the USB peripheral TX + * buffer and return the number placed in that buffer. + */ +uint32 usb_cdcacm_tx(const uint8* buf, uint32 len) { + /* Last transmission hasn't finished, abort */ + if (countTx) { + return 0; + } + + // We can only put VCOM_TX_EPSIZE bytes in the buffer + /* FIXME then why are we only copying half as many? */ + if (len > VCOM_TX_EPSIZE / 2) { + len = VCOM_TX_EPSIZE / 2; + } + + // Try to load some bytes if we can + if (len) { + usb_copy_to_pma(buf, len, VCOM_TX_ADDR); + usb_set_ep_tx_count(VCOM_TX_ENDP, len); + countTx += len; + usb_set_ep_tx_stat(VCOM_TX_ENDP, USB_EP_STAT_TX_VALID); + } + + return len; +} + +/* returns the number of available bytes are in the recv FIFO */ +uint32 usb_cdcacm_data_available(void) { + return newBytes; +} + +uint16 usb_cdcacm_get_pending() { + return countTx; +} + +/* Nonblocking byte receive. + * + * Copies up to len bytes from our private data buffer (*NOT* the PMA) + * into buf and deq's the FIFO. */ +uint32 usb_cdcacm_rx(uint8* buf, uint32 len) { + static int offset = 0; + int i; + + if (len > newBytes) { + len = newBytes; + } + + for (i = 0; i < len; i++) { + buf[i] = vcomBufferRx[i + offset]; + } + + newBytes -= len; + offset += len; + + /* Re-enable the RX endpoint, which we had set to receive 0 bytes */ + if (newBytes == 0) { + usb_set_ep_rx_count(VCOM_RX_ENDP, VCOM_RX_EPSIZE); + usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_VALID); + offset = 0; + } + + return len; +} + +uint8 usb_cdcacm_get_dtr() { + return ((line_dtr_rts & CONTROL_LINE_DTR) != 0); +} + +uint8 usb_cdcacm_get_rts() { + return ((line_dtr_rts & CONTROL_LINE_RTS) != 0); +} + +/* + * Callbacks + */ + +static void vcomDataTxCb(void) { + /* assumes tx transactions are atomic 64 bytes (nearly certain they are) */ + countTx = 0; +} + +#define EXC_RETURN 0xFFFFFFF9 +#define DEFAULT_CPSR 0x61000000 +static void vcomDataRxCb(void) { + /* FIXME this is mad buggy */ + + /* setEPRxCount on the previous cycle should garuntee + we havnt received more bytes than we can fit */ + newBytes = usb_get_ep_rx_count(VCOM_RX_ENDP); + usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_NAK); + + /* magic number, {0x31, 0x45, 0x41, 0x46} is "1EAF" */ + uint8 chkBuf[4]; + uint8 cmpBuf[4] = {0x31, 0x45, 0x41, 0x46}; + if (reset_state == DTR_NEGEDGE) { + reset_state = DTR_LOW; + + if (newBytes >= 4) { + unsigned int target = (unsigned int)wait_reset | 0x1; + + usb_copy_from_pma(chkBuf, 4, VCOM_RX_ADDR); + + int i; + USB_Bool cmpMatch = TRUE; + for (i = 0; i < 4; i++) { + if (chkBuf[i] != cmpBuf[i]) { + cmpMatch = FALSE; + } + } + + if (cmpMatch) { + asm volatile("mov r0, %[stack_top] \n\t" // Reset stack + "mov sp, r0 \n\t" + "mov r0, #1 \n\t" + "mov r1, %[target_addr] \n\t" + "mov r2, %[cpsr] \n\t" + "push {r2} \n\t" // Fake xPSR + "push {r1} \n\t" // PC target addr + "push {r0} \n\t" // Fake LR + "push {r0} \n\t" // Fake R12 + "push {r0} \n\t" // Fake R3 + "push {r0} \n\t" // Fake R2 + "push {r0} \n\t" // Fake R1 + "push {r0} \n\t" // Fake R0 + "mov lr, %[exc_return] \n\t" + "bx lr" + : + : [stack_top] "r" (STACK_TOP), + [target_addr] "r" (target), + [exc_return] "r" (EXC_RETURN), + [cpsr] "r" (DEFAULT_CPSR) + : "r0", "r1", "r2"); + /* should never get here */ + } + } + } + + usb_copy_from_pma(vcomBufferRx, newBytes, VCOM_RX_ADDR); +} + +static uint8* vcomGetSetLineCoding(uint16 length) { + if (length == 0) { + pInformation->Ctrl_Info.Usb_wLength = sizeof(USB_Line_Coding); + } + return (uint8*)&line_coding; +} + +static void usbInit(void) { + pInformation->Current_Configuration = 0; + + USB_BASE->CNTR = USB_CNTR_FRES; + + USBLIB->irq_mask = 0; + USB_BASE->CNTR = USBLIB->irq_mask; + USB_BASE->ISTR = 0; + USBLIB->irq_mask = USB_CNTR_RESETM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; + USB_BASE->CNTR = USBLIB->irq_mask; + + USB_BASE->ISTR = 0; + USBLIB->irq_mask = USB_ISR_MSK; + USB_BASE->CNTR = USBLIB->irq_mask; + + nvic_irq_enable(NVIC_USB_LP_CAN_RX0); + USBLIB->state = USB_UNCONNECTED; +} + +/* choose addresses to give endpoints the max 64 byte buffers */ +#define BTABLE_ADDRESS 0x00 +static void usbReset(void) { + pInformation->Current_Configuration = 0; + + /* current feature is current bmAttributes */ + pInformation->Current_Feature = (USB_CONFIG_ATTR_BUSPOWERED | + USB_CONFIG_ATTR_SELF_POWERED); + + USB_BASE->BTABLE = BTABLE_ADDRESS; + + /* setup control endpoint 0 */ + usb_set_ep_type(USB_EP0, USB_EP_EP_TYPE_CONTROL); + usb_set_ep_tx_stat(USB_EP0, USB_EP_STAT_TX_STALL); + usb_set_ep_rx_addr(USB_EP0, VCOM_CTRL_RX_ADDR); + usb_set_ep_tx_addr(USB_EP0, VCOM_CTRL_TX_ADDR); + usb_clear_status_out(USB_EP0); + + usb_set_ep_rx_count(USB_EP0, pProperty->MaxPacketSize); + usb_set_ep_rx_stat(USB_EP0, USB_EP_STAT_RX_VALID); + + /* setup management endpoint 1 */ + usb_set_ep_type(VCOM_NOTIFICATION_ENDP, USB_EP_EP_TYPE_INTERRUPT); + usb_set_ep_tx_addr(VCOM_NOTIFICATION_ENDP, VCOM_NOTIFICATION_ADDR); + usb_set_ep_tx_stat(VCOM_NOTIFICATION_ENDP, USB_EP_STAT_TX_NAK); + usb_set_ep_rx_stat(VCOM_NOTIFICATION_ENDP, USB_EP_STAT_RX_DISABLED); + + /* TODO figure out differences in style between RX/TX EP setup */ + + /* set up data endpoint OUT (RX) */ + usb_set_ep_type(VCOM_RX_ENDP, USB_EP_EP_TYPE_BULK); + usb_set_ep_rx_addr(VCOM_RX_ENDP, 0x110); + usb_set_ep_rx_count(VCOM_RX_ENDP, 64); + usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_VALID); + + /* set up data endpoint IN (TX) */ + usb_set_ep_type(VCOM_TX_ENDP, USB_EP_EP_TYPE_BULK); + usb_set_ep_tx_addr(VCOM_TX_ENDP, VCOM_TX_ADDR); + usb_set_ep_tx_stat(VCOM_TX_ENDP, USB_EP_STAT_TX_NAK); + usb_set_ep_rx_stat(VCOM_TX_ENDP, USB_EP_STAT_RX_DISABLED); + + USBLIB->state = USB_ATTACHED; + SetDeviceAddress(0); + + /* reset the rx fifo */ + recvBufIn = 0; + recvBufOut = 0; + maxNewBytes = VCOM_RX_EPSIZE; + countTx = 0; +} + +static RESULT usbDataSetup(uint8 request) { + uint8 *(*CopyRoutine)(uint16); + CopyRoutine = NULL; + + if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) { + switch (request) { + case (GET_LINE_CODING): + CopyRoutine = vcomGetSetLineCoding; + last_request = GET_LINE_CODING; + break; + case (SET_LINE_CODING): + CopyRoutine = vcomGetSetLineCoding; + last_request = SET_LINE_CODING; + break; + default: + break; + } + } + + if (CopyRoutine == NULL) { + return USB_UNSUPPORT; + } + + pInformation->Ctrl_Info.CopyData = CopyRoutine; + pInformation->Ctrl_Info.Usb_wOffset = 0; + (*CopyRoutine)(0); + return USB_SUCCESS; +} + +static RESULT usbNoDataSetup(uint8 request) { + uint8 new_signal; + + /* we support set com feature but dont handle it */ + if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) { + + switch (request) { + case (SET_COMM_FEATURE): + return USB_SUCCESS; + case (SET_CONTROL_LINE_STATE): + /* to reset the board, pull both dtr and rts low + then pulse dtr by itself */ + new_signal = (pInformation->USBwValues.bw.bb0 & + (CONTROL_LINE_DTR | CONTROL_LINE_RTS)); + line_dtr_rts = new_signal & 0x03; + + switch (reset_state) { + /* no default, covered enum */ + case DTR_UNSET: + if ((new_signal & CONTROL_LINE_DTR) == 0 ) { + reset_state = DTR_LOW; + } else { + reset_state = DTR_HIGH; + } + break; + + case DTR_HIGH: + if ((new_signal & CONTROL_LINE_DTR) == 0 ) { + reset_state = DTR_NEGEDGE; + } else { + reset_state = DTR_HIGH; + } + break; + + case DTR_NEGEDGE: + if ((new_signal & CONTROL_LINE_DTR) == 0 ) { + reset_state = DTR_LOW; + } else { + reset_state = DTR_HIGH; + } + break; + + case DTR_LOW: + if ((new_signal & CONTROL_LINE_DTR) == 0 ) { + reset_state = DTR_LOW; + } else { + reset_state = DTR_HIGH; + } + break; + } + + return USB_SUCCESS; + } + } + return USB_UNSUPPORT; +} + +static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting) { + if (alt_setting > 0) { + return USB_UNSUPPORT; + } else if (interface > 1) { + return USB_UNSUPPORT; + } + + return USB_SUCCESS; +} + +static uint8* usbGetDeviceDescriptor(uint16 length) { + return Standard_GetDescriptorData(length, &Device_Descriptor); +} + +static uint8* usbGetConfigDescriptor(uint16 length) { + return Standard_GetDescriptorData(length, &Config_Descriptor); +} + +static uint8* usbGetStringDescriptor(uint16 length) { + uint8 wValue0 = pInformation->USBwValue0; + + if (wValue0 > 2) { + return NULL; + } + return Standard_GetDescriptorData(length, &String_Descriptor[wValue0]); +} + +static void usbSetConfiguration(void) { + if (pInformation->Current_Configuration != 0) { + USBLIB->state = USB_CONFIGURED; + } +} + +static void usbSetDeviceAddress(void) { + USBLIB->state = USB_ADDRESSED; +} + +#define RESET_DELAY 100000 +static void wait_reset(void) { + delay_us(RESET_DELAY); + nvic_sys_reset(); +} diff --git a/libmaple/usb/stm32f1/usb_descriptors.h b/libmaple/usb/stm32f1/usb_descriptors.h new file mode 100644 index 0000000..9bcb2b6 --- /dev/null +++ b/libmaple/usb/stm32f1/usb_descriptors.h @@ -0,0 +1,148 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 LeafLabs LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +#ifndef _USB_DESCRIPTORS_H_ +#define _USB_DESCRIPTORS_H_ + +#include + +#define USB_DESCRIPTOR_TYPE_DEVICE 0x01 +#define USB_DESCRIPTOR_TYPE_CONFIGURATION 0x02 +#define USB_DESCRIPTOR_TYPE_STRING 0x03 +#define USB_DESCRIPTOR_TYPE_INTERFACE 0x04 +#define USB_DESCRIPTOR_TYPE_ENDPOINT 0x05 + +#define USB_DEVICE_CLASS_CDC 0x02 +#define USB_DEVICE_SUBCLASS_CDC 0x00 +#define USB_INTERFACE_CLASS_CDC 0x02 +/* CDC Abstract Control Model */ +#define USB_INTERFACE_SUBCLASS_CDC_ACM 0x02 +#define USB_INTERFACE_CLASS_DIC 0x0A + +#define USB_CONFIG_ATTR_BUSPOWERED 0b10000000 +#define USB_CONFIG_ATTR_SELF_POWERED 0b11000000 + +#define EP_TYPE_INTERRUPT 0x03 +#define EP_TYPE_BULK 0x02 + +#define USB_DESCRIPTOR_ENDPOINT_IN 0x80 +#define USB_DESCRIPTOR_ENDPOINT_OUT 0x00 + +#define USB_DESCRIPTOR_STRING_LEN(x) (2 + (x << 1)) + +#if defined(__cplusplus) +extern "C" { +#endif + +#define USB_DESCRIPTOR_STRING(len) \ + struct { \ + uint8 bLength; \ + uint8 bDescriptorType; \ + uint16 bString[len]; \ + } __packed + +#define CDC_FUNCTIONAL_DESCRIPTOR_SIZE(DataSize) (3 + DataSize) +#define CDC_FUNCTIONAL_DESCRIPTOR(DataSize) \ + struct { \ + uint8 bLength; \ + uint8 bDescriptorType; \ + uint8 SubType; \ + uint8 Data[DataSize]; \ + } __packed + +typedef struct { + uint8 bLength; + uint8 bDescriptorType; + uint16 bcdUSB; + uint8 bDeviceClass; + uint8 bDeviceSubClass; + uint8 bDeviceProtocol; + uint8 bMaxPacketSize0; + uint16 idVendor; + uint16 idProduct; + uint16 bcdDevice; + uint8 iManufacturer; + uint8 iProduct; + uint8 iSerialNumber; + uint8 bNumConfigurations; +} __packed USB_Descriptor_Device; + +typedef struct { + uint8 bLength; + uint8 bDescriptorType; + uint16 wTotalLength; + uint8 bNumInterfaces; + uint8 bConfigurationValue; + uint8 iConfiguration; + uint8 bmAttributes; + uint8 bMaxPower; +} __packed USB_Descriptor_Config_Header; + +typedef struct { + uint8 bLength; + uint8 bDescriptorType; + uint8 bInterfaceNumber; + uint8 bAlternateSetting; + uint8 bNumEndpoints; + uint8 bInterfaceClass; + uint8 bInterfaceSubClass; + uint8 bInterfaceProtocol; + uint8 iInterface; +} __packed USB_Descriptor_Interface; + +typedef struct { + uint8 bLength; + uint8 bDescriptorType; + uint8 bEndpointAddress; + uint8 bmAttributes; + uint16 wMaxPacketSize; + uint8 bInterval; +} __packed USB_Descriptor_Endpoint; + +typedef struct { + USB_Descriptor_Config_Header Config_Header; + USB_Descriptor_Interface CCI_Interface; + CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_IntHeader; + CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_CallManagement; + CDC_FUNCTIONAL_DESCRIPTOR(1) CDC_Functional_ACM; + CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_Union; + USB_Descriptor_Endpoint ManagementEndpoint; + USB_Descriptor_Interface DCI_Interface; + USB_Descriptor_Endpoint DataOutEndpoint; + USB_Descriptor_Endpoint DataInEndpoint; +} __packed USB_Descriptor_Config; + +typedef struct { + uint8 bLength; + uint8 bDescriptorType; + uint16 bString[]; +} USB_Descriptor_String; + +#if defined(__cplusplus) +} +#endif + +#endif diff --git a/libmaple/usb/stm32f1/usb_lib_globals.h b/libmaple/usb/stm32f1/usb_lib_globals.h new file mode 100644 index 0000000..1cd2754 --- /dev/null +++ b/libmaple/usb/stm32f1/usb_lib_globals.h @@ -0,0 +1,55 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +#ifndef _USB_LIB_GLOBALS_H_ +#define _USB_LIB_GLOBALS_H_ + +/* usb_lib headers */ +#include "usb_type.h" +#include "usb_core.h" + +#ifdef __cplusplus +extern "C" { +#endif + +extern USER_STANDARD_REQUESTS User_Standard_Requests; +extern USER_STANDARD_REQUESTS *pUser_Standard_Requests; + +extern DEVICE_PROP Device_Property; +extern DEVICE_PROP *pProperty; + +extern DEVICE_INFO Device_Info; +extern DEVICE_INFO *pInformation; + +extern DEVICE Device_Table; +extern u16 SaveRState; +extern u16 SaveTState; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libmaple/usb/stm32f1/usb_reg_map.c b/libmaple/usb/stm32f1/usb_reg_map.c new file mode 100644 index 0000000..75562e1 --- /dev/null +++ b/libmaple/usb/stm32f1/usb_reg_map.c @@ -0,0 +1,79 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +#include "usb_reg_map.h" + +/* TODO these could use some improvement; they're fairly + * straightforward ports of the analogous ST code. The PMA blit + * routines in particular are obvious targets for performance + * measurement and tuning. */ + +void usb_copy_to_pma(const uint8 *buf, uint16 len, uint16 pma_offset) { + uint16 *dst = (uint16*)usb_pma_ptr(pma_offset); + uint16 n = len >> 1; + uint16 i; + for (i = 0; i < n; i++) { + *dst = (uint16)(*buf) | *(buf + 1) << 8; + buf += 2; + dst += 2; + } + if (len & 1) { + *dst = *buf; + } +} + +void usb_copy_from_pma(uint8 *buf, uint16 len, uint16 pma_offset) { + uint32 *src = (uint32*)usb_pma_ptr(pma_offset); + uint16 *dst = (uint16*)buf; + uint16 n = len >> 1; + uint16 i; + for (i = 0; i < n; i++) { + *dst++ = *src++; + } + if (len & 1) { + *dst = *src & 0xFF; + } +} + +void usb_set_ep_rx_count(uint8 ep, uint16 count) { + uint32 *rxc = usb_ep_rx_count_ptr(ep); + uint16 nblocks; + if (count > 62) { + /* use 32-byte memory block size */ + nblocks = count >> 5; + if ((count & 0x1F) == 0) { + nblocks--; + } + *rxc = (nblocks << 10) | 0x8000; + } else { + /* use 2-byte memory block size */ + nblocks = count >> 1; + if ((count & 0x1) != 0) { + nblocks++; + } + *rxc = nblocks << 10; + } +} diff --git a/libmaple/usb/stm32f1/usb_reg_map.h b/libmaple/usb/stm32f1/usb_reg_map.h new file mode 100644 index 0000000..ce80842 --- /dev/null +++ b/libmaple/usb/stm32f1/usb_reg_map.h @@ -0,0 +1,433 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +#include +#include + +#ifndef _USB_REG_MAP_H_ +#define _USB_REG_MAP_H_ + +/* TODO: + * - Pick one of "endp", "ep" "endpt" + */ + +/* + * Register map and base pointer + */ + +#define USB_NR_EP_REGS 8 + +/** USB register map type */ +typedef struct usb_reg_map { + __io uint32 EP[USB_NR_EP_REGS]; /**< Endpoint registers */ + const uint32 RESERVED[8]; /**< Reserved */ + __io uint32 CNTR; /**< Control register */ + __io uint32 ISTR; /**< Interrupt status register */ + __io uint32 FNR; /**< Frame number register */ + __io uint32 DADDR; /**< Device address */ + __io uint32 BTABLE; /**< @brief Buffer table address + * + * Address offset within the USB + * packet memory area which points + * to the base of the buffer + * descriptor table. Must be + * aligned to an 8 byte boundary. + */ +} usb_reg_map; + +/** USB register map base pointer */ +#define USB_BASE ((struct usb_reg_map*)0x40005C00) + +/* + * Register bit definitions + */ + +/* Endpoint registers (USB_EPnR) */ + +#define USB_EP_CTR_RX_BIT 15 +#define USB_EP_DTOG_RX_BIT 14 +#define USB_EP_SETUP_BIT 11 +#define USB_EP_EP_KIND_BIT 8 +#define USB_EP_CTR_TX_BIT 7 +#define USB_EP_DTOG_TX_BIT 6 + +#define USB_EP_CTR_RX BIT(USB_EP_CTR_RX_BIT) +#define USB_EP_DTOG_RX BIT(USB_EP_DTOG_RX_BIT) +#define USB_EP_STAT_RX (0x3 << 12) +#define USB_EP_STAT_RX_DISABLED (0x0 << 12) +#define USB_EP_STAT_RX_STALL (0x1 << 12) +#define USB_EP_STAT_RX_NAK (0x2 << 12) +#define USB_EP_STAT_RX_VALID (0x3 << 12) +#define USB_EP_SETUP BIT(USB_EP_SETUP_BIT) +#define USB_EP_EP_TYPE (0x3 << 9) +#define USB_EP_EP_TYPE_BULK (0x0 << 9) +#define USB_EP_EP_TYPE_CONTROL (0x1 << 9) +#define USB_EP_EP_TYPE_ISO (0x2 << 9) +#define USB_EP_EP_TYPE_INTERRUPT (0x3 << 9) +#define USB_EP_EP_KIND BIT(USB_EP_EP_KIND_BIT) +#define USB_EP_CTR_TX BIT(USB_EP_CTR_TX_BIT) +#define USB_EP_DTOG_TX BIT(USB_EP_DTOG_TX_BIT) +#define USB_EP_STAT_TX (0x3 << 4) +#define USB_EP_STAT_TX_DISABLED (0x0 << 4) +#define USB_EP_STAT_TX_STALL (0x1 << 4) +#define USB_EP_STAT_TX_NAK (0x2 << 4) +#define USB_EP_STAT_TX_VALID (0x3 << 4) +#define USB_EP_EA 0xF + +/* Control register (USB_CNTR) */ + +#define USB_CNTR_CTRM_BIT 15 +#define USB_CNTR_PMAOVERM_BIT 14 +#define USB_CNTR_ERRM_BIT 13 +#define USB_CNTR_WKUPM_BIT 12 +#define USB_CNTR_SUSPM_BIT 11 +#define USB_CNTR_RESETM_BIT 10 +#define USB_CNTR_SOFM_BIT 9 +#define USB_CNTR_ESOFM_BIT 8 +#define USB_CNTR_RESUME_BIT 4 +#define USB_CNTR_FSUSP_BIT 3 +#define USB_CNTR_LP_MODE_BIT 2 +#define USB_CNTR_PDWN_BIT 1 +#define USB_CNTR_FRES_BIT 0 + +#define USB_CNTR_CTRM BIT(USB_CNTR_CTRM_BIT) +#define USB_CNTR_PMAOVERM BIT(USB_CNTR_PMAOVERM_BIT) +#define USB_CNTR_ERRM BIT(USB_CNTR_ERRM_BIT) +#define USB_CNTR_WKUPM BIT(USB_CNTR_WKUPM_BIT) +#define USB_CNTR_SUSPM BIT(USB_CNTR_SUSPM_BIT) +#define USB_CNTR_RESETM BIT(USB_CNTR_RESETM_BIT) +#define USB_CNTR_SOFM BIT(USB_CNTR_SOFM_BIT) +#define USB_CNTR_ESOFM BIT(USB_CNTR_ESOFM_BIT) +#define USB_CNTR_RESUME BIT(USB_CNTR_RESUME_BIT) +#define USB_CNTR_FSUSP BIT(USB_CNTR_FSUSP_BIT) +#define USB_CNTR_LP_MODE BIT(USB_CNTR_LP_MODE_BIT) +#define USB_CNTR_PDWN BIT(USB_CNTR_PDWN_BIT) +#define USB_CNTR_FRES BIT(USB_CNTR_FRES_BIT) + +/* Interrupt status register (USB_ISTR) */ + +#define USB_ISTR_CTR_BIT 15 +#define USB_ISTR_PMAOVR_BIT 14 +#define USB_ISTR_ERR_BIT 13 +#define USB_ISTR_WKUP_BIT 12 +#define USB_ISTR_SUSP_BIT 11 +#define USB_ISTR_RESET_BIT 10 +#define USB_ISTR_SOF_BIT 9 +#define USB_ISTR_ESOF_BIT 8 +#define USB_ISTR_DIR_BIT 4 + +#define USB_ISTR_CTR BIT(USB_ISTR_CTR_BIT) +#define USB_ISTR_PMAOVR BIT(USB_ISTR_PMAOVR_BIT) +#define USB_ISTR_ERR BIT(USB_ISTR_ERR_BIT) +#define USB_ISTR_WKUP BIT(USB_ISTR_WKUP_BIT) +#define USB_ISTR_SUSP BIT(USB_ISTR_SUSP_BIT) +#define USB_ISTR_RESET BIT(USB_ISTR_RESET_BIT) +#define USB_ISTR_SOF BIT(USB_ISTR_SOF_BIT) +#define USB_ISTR_ESOF BIT(USB_ISTR_ESOF_BIT) +#define USB_ISTR_DIR BIT(USB_ISTR_DIR_BIT) +#define USB_ISTR_EP_ID 0xF + +/* Frame number register (USB_FNR) */ + +#define USB_FNR_RXDP_BIT 15 +#define USB_FNR_RXDM_BIT 14 +#define USB_FNR_LCK_BIT 13 + +#define USB_FNR_RXDP BIT(USB_FNR_RXDP_BIT) +#define USB_FNR_RXDM BIT(USB_FNR_RXDM_BIT) +#define USB_FNR_LCK BIT(USB_FNR_LCK_BIT) +#define USB_FNR_LSOF (0x3 << 11) +#define USB_FNR_FN 0x7FF + +/* Device address (USB_DADDR) */ + +#define USB_DADDR_EF_BIT 7 +#define USB_DADDR_ADD6_BIT 6 +#define USB_DADDR_ADD5_BIT 5 +#define USB_DADDR_ADD4_BIT 4 +#define USB_DADDR_ADD3_BIT 3 +#define USB_DADDR_ADD2_BIT 2 +#define USB_DADDR_ADD1_BIT 1 +#define USB_DADDR_ADD0_BIT 0 + +#define USB_DADDR_EF BIT(USB_DADDR_EF_BIT) +#define USB_DADDR_ADD6 BIT(USB_DADDR_ADD6_BIT) +#define USB_DADDR_ADD5 BIT(USB_DADDR_ADD5_BIT) +#define USB_DADDR_ADD4 BIT(USB_DADDR_ADD4_BIT) +#define USB_DADDR_ADD3 BIT(USB_DADDR_ADD3_BIT) +#define USB_DADDR_ADD2 BIT(USB_DADDR_ADD2_BIT) +#define USB_DADDR_ADD1 BIT(USB_DADDR_ADD1_BIT) +#define USB_DADDR_ADD0 BIT(USB_DADDR_ADD0_BIT) + +/* Buffer table address (USB_BTABLE) */ + +#define USB_BTABLE_BTABLE (0x1FFF << 3) + +/* + * Register convenience routines + */ + +#define __EP_CTR_NOP (USB_EP_CTR_RX | USB_EP_CTR_TX) +#define __EP_NONTOGGLE (USB_EP_CTR_RX | USB_EP_SETUP | \ + USB_EP_EP_TYPE | USB_EP_EP_KIND | \ + USB_EP_CTR_TX | USB_EP_EA) + +static inline void usb_clear_ctr_rx(uint8 ep) { + uint32 epr = USB_BASE->EP[ep]; + USB_BASE->EP[ep] = epr & ~USB_EP_CTR_RX & __EP_NONTOGGLE; +} + +static inline void usb_clear_ctr_tx(uint8 ep) { + uint32 epr = USB_BASE->EP[ep]; + USB_BASE->EP[ep] = epr & ~USB_EP_CTR_TX & __EP_NONTOGGLE; +} + +static inline void usb_set_ep_rx_stat(uint8 ep, uint32 status) { + uint32 epr = USB_BASE->EP[ep]; + epr &= ~(USB_EP_STAT_TX | USB_EP_DTOG_RX | USB_EP_DTOG_TX); + epr |= __EP_CTR_NOP; + epr ^= status; + USB_BASE->EP[ep] = epr; +} + +static inline void usb_set_ep_tx_stat(uint8 ep, uint32 status) { + uint32 epr = USB_BASE->EP[ep]; + epr &= ~(USB_EP_STAT_RX | USB_EP_DTOG_RX | USB_EP_DTOG_TX); + epr |= __EP_CTR_NOP; + epr ^= status; + USB_BASE->EP[ep] = epr; +} + +static inline void usb_set_ep_type(uint8 ep, uint32 type) { + uint32 epr = USB_BASE->EP[ep]; + epr &= ~USB_EP_EP_TYPE & __EP_NONTOGGLE; + epr |= type; + USB_BASE->EP[ep] = epr; +} + +static inline void usb_set_ep_kind(uint8 ep, uint32 kind) { + uint32 epr = USB_BASE->EP[ep]; + epr &= ~USB_EP_EP_KIND & __EP_NONTOGGLE; + epr |= kind; + USB_BASE->EP[ep] = epr; +} + +static inline void usb_clear_status_out(uint8 ep) { + usb_set_ep_kind(ep, 0); +} + +/* + * Packet memory area (PMA) base pointer + */ + +/** + * @brief USB packet memory area (PMA) base pointer. + * + * The USB PMA is SRAM shared between USB and CAN. The USB peripheral + * accesses this memory directly via the packet buffer interface. */ +#define USB_PMA_BASE ((__io void*)0x40006000) + +/* + * PMA conveniences + */ + +void usb_copy_to_pma(const uint8 *buf, uint16 len, uint16 pma_offset); +void usb_copy_from_pma(uint8 *buf, uint16 len, uint16 pma_offset); + +static inline void* usb_pma_ptr(uint32 offset) { + return (void*)(USB_PMA_BASE + 2 * offset); +} + +/* + * BTABLE + */ + +/* (Forward-declared) BTABLE entry. + * + * The BTABLE can be viewed as an array of usb_btable_ent values; + * these vary in structure according to the configuration of the + * endpoint. + */ +union usb_btable_ent; + +/* Bidirectional endpoint BTABLE entry */ +typedef struct usb_btable_bidi { + __io uint16 addr_tx; const uint16 PAD1; + __io uint16 count_tx; const uint16 PAD2; + __io uint16 addr_rx; const uint16 PAD3; + __io uint16 count_rx; const uint16 PAD4; +} usb_btable_bidi; + +/* Unidirectional receive-only endpoint BTABLE entry */ +typedef struct usb_btable_uni_rx { + __io uint16 empty1; const uint16 PAD1; + __io uint16 empty2; const uint16 PAD2; + __io uint16 addr_rx; const uint16 PAD3; + __io uint16 count_rx; const uint16 PAD4; +} usb_btable_uni_rx; + +/* Unidirectional transmit-only endpoint BTABLE entry */ +typedef struct usb_btable_uni_tx { + __io uint16 addr_tx; const uint16 PAD1; + __io uint16 count_tx; const uint16 PAD2; + __io uint16 empty1; const uint16 PAD3; + __io uint16 empty2; const uint16 PAD4; +} usb_btable_uni_tx; + +/* Double-buffered transmission endpoint BTABLE entry */ +typedef struct usb_btable_dbl_tx { + __io uint16 addr_tx0; const uint16 PAD1; + __io uint16 count_tx0; const uint16 PAD2; + __io uint16 addr_tx1; const uint16 PAD3; + __io uint16 count_tx1; const uint16 PAD4; +} usb_btable_dbl_tx; + +/* Double-buffered reception endpoint BTABLE entry */ +typedef struct usb_btable_dbl_rx { + __io uint16 addr_rx0; const uint16 PAD1; + __io uint16 count_rx0; const uint16 PAD2; + __io uint16 addr_rx1; const uint16 PAD3; + __io uint16 count_rx1; const uint16 PAD4; +} usb_btable_dbl_rx; + +/* TODO isochronous endpoint entries */ + +/* Definition for above forward-declared BTABLE entry. */ +typedef union usb_btable_ent { + usb_btable_bidi bidi; + usb_btable_uni_rx u_rx; + usb_btable_uni_tx u_tx; + usb_btable_dbl_tx d_tx; + usb_btable_dbl_rx d_rx; +} usb_btable_ent; + +/* + * BTABLE conveniences + */ + +/* TODO (?) Convert usages of the many (and lengthily-named) + * accessors/mutators below to just manipulating usb_btable_entry + * values. */ + +static inline uint32* usb_btable_ptr(uint32 offset) { + return (uint32*)usb_pma_ptr(USB_BASE->BTABLE + offset); +} + +static inline usb_btable_ent *usb_btable(void) { + return (usb_btable_ent*)usb_btable_ptr(0); +} + +/* TX address */ + +static inline uint32* usb_ep_tx_addr_ptr(uint8 ep) { + return usb_btable_ptr(ep * 8); +} + +static inline uint16 usb_get_ep_tx_addr(uint8 ep) { + return (uint16)*usb_ep_tx_addr_ptr(ep); +} + +static inline void usb_set_ep_tx_addr(uint8 ep, uint16 addr) { + uint32 *tx_addr = usb_ep_tx_addr_ptr(ep); + *tx_addr = addr & ~0x1; +} + +/* RX address */ + +static inline uint32* usb_ep_rx_addr_ptr(uint8 ep) { + return usb_btable_ptr(ep * 8 + 4); +} + +static inline uint16 usb_get_ep_rx_addr(uint8 ep) { + return (uint16)*usb_ep_rx_addr_ptr(ep); +} + +static inline void usb_set_ep_rx_addr(uint8 ep, uint16 addr) { + uint32 *rx_addr = usb_ep_rx_addr_ptr(ep); + *rx_addr = addr & ~0x1; +} + +/* TX count (doesn't cover double-buffered and isochronous in) */ + +static inline uint32* usb_ep_tx_count_ptr(uint8 ep) { + return usb_btable_ptr(ep * 8 + 2); +} + +static inline uint16 usb_get_ep_tx_count(uint8 ep) { + return (uint16)*usb_ep_tx_count_ptr(ep); +} + +static inline void usb_set_ep_tx_count(uint8 ep, uint16 count) { + uint32 *txc = usb_ep_tx_count_ptr(ep); + *txc = count; +} + +/* RX count */ + +static inline uint32* usb_ep_rx_count_ptr(uint8 ep) { + return usb_btable_ptr(ep * 8 + 6); +} + +static inline uint16 usb_get_ep_rx_count(uint8 ep) { + return (uint16)*usb_ep_rx_count_ptr(ep) & 0x3FF; +} + +void usb_set_ep_rx_count(uint8 ep, uint16 count); + +/* + * Misc. types + */ + +typedef enum usb_ep { + USB_EP0, + USB_EP1, + USB_EP2, + USB_EP3, + USB_EP4, + USB_EP5, + USB_EP6, + USB_EP7, +} usb_ep; + +typedef enum usb_ep_type { + USB_EP_T_CTL = USB_EP_EP_TYPE_CONTROL, + USB_EP_T_BULK = USB_EP_EP_TYPE_BULK, + USB_EP_T_INT = USB_EP_EP_TYPE_INTERRUPT, + USB_EP_T_ISO = USB_EP_EP_TYPE_ISO +} usb_ep_type; + +typedef enum usb_ep_stat { + USB_EP_ST_RX_DIS = USB_EP_STAT_RX_DISABLED, + USB_EP_ST_RX_STL = USB_EP_STAT_RX_STALL, + USB_EP_ST_RX_NAK = USB_EP_STAT_RX_NAK, + USB_EP_ST_RX_VAL = USB_EP_STAT_RX_VALID, + USB_EP_ST_TX_DIS = USB_EP_STAT_TX_DISABLED, + USB_EP_ST_TX_STL = USB_EP_STAT_TX_STALL, + USB_EP_ST_TX_NAK = USB_EP_STAT_TX_NAK, + USB_EP_ST_TX_VAL = USB_EP_STAT_TX_VALID +} usb_ep_stat; + +#endif diff --git a/libmaple/usb/usb.c b/libmaple/usb/usb.c deleted file mode 100644 index 0130bab..0000000 --- a/libmaple/usb/usb.c +++ /dev/null @@ -1,381 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2010 LeafLabs LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @file libmaple/usb/usb.c - * @brief USB support. - * - * This is a mess. What we need almost amounts to a ground-up rewrite. - */ - -#include - -#include -#include - -/* Private headers */ -#include "usb_reg_map.h" -#include "usb_lib_globals.h" - -/* usb_lib headers */ -#include "usb_type.h" -#include "usb_core.h" - -static void dispatch_ctr_lp(void); - -/* - * usb_lib/ globals - */ - -uint16 SaveTState; /* caches TX status for later use */ -uint16 SaveRState; /* caches RX status for later use */ - -/* - * Other state - */ - -typedef enum { - RESUME_EXTERNAL, - RESUME_INTERNAL, - RESUME_LATER, - RESUME_WAIT, - RESUME_START, - RESUME_ON, - RESUME_OFF, - RESUME_ESOF -} RESUME_STATE; - -struct { - volatile RESUME_STATE eState; - volatile uint8 bESOFcnt; -} ResumeS; - -static usblib_dev usblib = { - .irq_mask = USB_ISR_MSK, - .state = USB_UNCONNECTED, - .clk_id = RCC_USB, -}; -usblib_dev *USBLIB = &usblib; - -/* - * Routines - */ - -void usb_init_usblib(usblib_dev *dev, - void (**ep_int_in)(void), - void (**ep_int_out)(void)) { - rcc_clk_enable(dev->clk_id); - - dev->ep_int_in = ep_int_in; - dev->ep_int_out = ep_int_out; - - /* usb_lib/ declares both and then assumes that pFoo points to Foo - * (even though the names don't always match), which is stupid for - * all of the obvious reasons, but whatever. Here we are. */ - pInformation = &Device_Info; - pProperty = &Device_Property; - pUser_Standard_Requests = &User_Standard_Requests; - - pInformation->ControlState = 2; /* FIXME [0.0.12] use - CONTROL_STATE enumerator */ - pProperty->Init(); -} - -static void usb_suspend(void) { - uint16 cntr; - - /* TODO decide if read/modify/write is really what we want - * (e.g. usb_resume_init() reconfigures CNTR). */ - cntr = USB_BASE->CNTR; - cntr |= USB_CNTR_FSUSP; - USB_BASE->CNTR = cntr; - cntr |= USB_CNTR_LP_MODE; - USB_BASE->CNTR = cntr; - - USBLIB->state = USB_SUSPENDED; -} - -static void usb_resume_init(void) { - uint16 cntr; - - cntr = USB_BASE->CNTR; - cntr &= ~USB_CNTR_LP_MODE; - USB_BASE->CNTR = cntr; - - /* Enable interrupt lines */ - USB_BASE->CNTR = USB_ISR_MSK; -} - -static void usb_resume(RESUME_STATE eResumeSetVal) { - uint16 cntr; - - if (eResumeSetVal != RESUME_ESOF) - ResumeS.eState = eResumeSetVal; - - switch (ResumeS.eState) - { - case RESUME_EXTERNAL: - usb_resume_init(); - ResumeS.eState = RESUME_OFF; - break; - case RESUME_INTERNAL: - usb_resume_init(); - ResumeS.eState = RESUME_START; - break; - case RESUME_LATER: - ResumeS.bESOFcnt = 2; - ResumeS.eState = RESUME_WAIT; - break; - case RESUME_WAIT: - ResumeS.bESOFcnt--; - if (ResumeS.bESOFcnt == 0) - ResumeS.eState = RESUME_START; - break; - case RESUME_START: - cntr = USB_BASE->CNTR; - cntr |= USB_CNTR_RESUME; - USB_BASE->CNTR = cntr; - ResumeS.eState = RESUME_ON; - ResumeS.bESOFcnt = 10; - break; - case RESUME_ON: - ResumeS.bESOFcnt--; - if (ResumeS.bESOFcnt == 0) { - cntr = USB_BASE->CNTR; - cntr &= ~USB_CNTR_RESUME; - USB_BASE->CNTR = cntr; - ResumeS.eState = RESUME_OFF; - } - break; - case RESUME_OFF: - case RESUME_ESOF: - default: - ResumeS.eState = RESUME_OFF; - break; - } -} - -#define SUSPEND_ENABLED 1 -void __irq_usb_lp_can_rx0(void) { - uint16 istr = USB_BASE->ISTR; - - /* Use USB_ISR_MSK to only include code for bits we care about. */ - -#if (USB_ISR_MSK & USB_ISTR_RESET) - if (istr & USB_ISTR_RESET & USBLIB->irq_mask) { - USB_BASE->ISTR = ~USB_ISTR_RESET; - pProperty->Reset(); - } -#endif - -#if (USB_ISR_MSK & USB_ISTR_PMAOVR) - if (istr & ISTR_PMAOVR & USBLIB->irq_mask) { - USB_BASE->ISTR = ~USB_ISTR_PMAOVR; - } -#endif - -#if (USB_ISR_MSK & USB_ISTR_ERR) - if (istr & USB_ISTR_ERR & USBLIB->irq_mask) { - USB_BASE->ISTR = ~USB_ISTR_ERR; - } -#endif - -#if (USB_ISR_MSK & USB_ISTR_WKUP) - if (istr & USB_ISTR_WKUP & USBLIB->irq_mask) { - USB_BASE->ISTR = ~USB_ISTR_WKUP; - usb_resume(RESUME_EXTERNAL); - } -#endif - -#if (USB_ISR_MSK & USB_ISTR_SUSP) - if (istr & USB_ISTR_SUSP & USBLIB->irq_mask) { - /* check if SUSPEND is possible */ - if (SUSPEND_ENABLED) { - usb_suspend(); - } else { - /* if not possible then resume after xx ms */ - usb_resume(RESUME_LATER); - } - /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ - USB_BASE->ISTR = ~USB_ISTR_SUSP; -} -#endif - -#if (USB_ISR_MSK & USB_ISTR_SOF) - if (istr & USB_ISTR_SOF & USBLIB->irq_mask) { - USB_BASE->ISTR = ~USB_ISTR_SOF; - } -#endif - -#if (USB_ISR_MSK & USB_ISTR_ESOF) - if (istr & USB_ISTR_ESOF & USBLIB->irq_mask) { - USB_BASE->ISTR = ~USB_ISTR_ESOF; - /* resume handling timing is made with ESOFs */ - usb_resume(RESUME_ESOF); /* request without change of the machine state */ - } -#endif - - /* - * Service the correct transfer interrupt. - */ - -#if (USB_ISR_MSK & USB_ISTR_CTR) - if (istr & USB_ISTR_CTR & USBLIB->irq_mask) { - dispatch_ctr_lp(); - } -#endif -} - -/* - * Auxiliary routines - */ - -static inline uint8 dispatch_endpt_zero(uint16 istr_dir); -static inline void dispatch_endpt(uint8 ep); -static inline void set_rx_tx_status0(uint16 rx, uint16 tx); - -static void handle_setup0(void); -static void handle_in0(void); -static void handle_out0(void); - -static void dispatch_ctr_lp() { - uint16 istr; - while (((istr = USB_BASE->ISTR) & USB_ISTR_CTR) != 0) { - /* TODO WTF, figure this out: RM0008 says CTR is read-only, - * but ST's firmware claims it's clear-only, and emphasizes - * the importance of clearing it in more than one place. */ - USB_BASE->ISTR = ~USB_ISTR_CTR; - uint8 ep_id = istr & USB_ISTR_EP_ID; - if (ep_id == 0) { - /* TODO figure out why it's OK to break out of the loop - * once we're done serving endpoint zero, but not okay if - * there are multiple nonzero endpoint transfers to - * handle. */ - if (dispatch_endpt_zero(istr & USB_ISTR_DIR)) - return; - } else { - dispatch_endpt(ep_id); - } - } -} - -/* FIXME Dataflow on endpoint 0 RX/TX status is based off of ST's - * code, and is ugly/confusing in its use of SaveRState/SaveTState. - * Fixing this requires filling in handle_in0(), handle_setup0(), - * handle_out0(). */ -static inline uint8 dispatch_endpt_zero(uint16 istr_dir) { - uint32 epr = (uint16)USB_BASE->EP[0]; - - if (!(epr & (USB_EP_CTR_TX | USB_EP_SETUP | USB_EP_CTR_RX))) { - return 0; - } - - /* Cache RX/TX statuses in SaveRState/SaveTState, respectively. - * The various handle_foo0() may clobber these values - * before we reset them at the end of this routine. */ - SaveRState = epr & USB_EP_STAT_RX; - SaveTState = epr & USB_EP_STAT_TX; - - /* Set actual RX/TX statuses to NAK while we're thinking */ - set_rx_tx_status0(USB_EP_STAT_RX_NAK, USB_EP_STAT_TX_NAK); - - if (istr_dir == 0) { - /* ST RM0008: "If DIR bit=0, CTR_TX bit is set in the USB_EPnR - * register related to the interrupting endpoint. The - * interrupting transaction is of IN type (data transmitted by - * the USB peripheral to the host PC)." */ - ASSERT_FAULT(epr & USB_EP_CTR_TX); - usb_clear_ctr_tx(USB_EP0); - handle_in0(); - } else { - /* RM0008: "If DIR bit=1, CTR_RX bit or both CTR_TX/CTR_RX - * are set in the USB_EPnR register related to the - * interrupting endpoint. The interrupting transaction is of - * OUT type (data received by the USB peripheral from the host - * PC) or two pending transactions are waiting to be - * processed." - * - * [mbolivar] Note how the following control flow (which - * replicates ST's) doesn't seem to actually handle both - * interrupts that are ostensibly pending when both CTR_RX and - * CTR_TX are set. - * - * TODO sort this mess out. - */ - if (epr & USB_EP_CTR_TX) { - usb_clear_ctr_tx(USB_EP0); - handle_in0(); - } else { /* SETUP or CTR_RX */ - /* SETUP is held constant while CTR_RX is set, so clear it - * either way */ - usb_clear_ctr_rx(USB_EP0); - if (epr & USB_EP_SETUP) { - handle_setup0(); - } else { /* CTR_RX */ - handle_out0(); - } - } - } - - set_rx_tx_status0(SaveRState, SaveTState); - return 1; -} - -static inline void dispatch_endpt(uint8 ep) { - uint32 epr = USB_BASE->EP[ep]; - /* If ISTR_CTR is set and the ISTR gave us this EP_ID to handle, - * then presumably at least one of CTR_RX and CTR_TX is set, but - * again, ST's control flow allows for the possibility of neither. - * - * TODO try to find out if neither being set is possible. */ - if (epr & USB_EP_CTR_RX) { - usb_clear_ctr_rx(ep); - (USBLIB->ep_int_out[ep - 1])(); - } - if (epr & USB_EP_CTR_TX) { - usb_clear_ctr_tx(ep); - (USBLIB->ep_int_in[ep - 1])(); - } -} - -static inline void set_rx_tx_status0(uint16 rx, uint16 tx) { - usb_set_ep_rx_stat(USB_EP0, rx); - usb_set_ep_tx_stat(USB_EP0, tx); -} - -/* TODO Rip out usb_lib/ dependency from the following functions: */ - -static void handle_setup0(void) { - Setup0_Process(); -} - -static void handle_in0(void) { - In0_Process(); -} - -static void handle_out0(void) { - Out0_Process(); -} diff --git a/libmaple/usb/usb_cdcacm.c b/libmaple/usb/usb_cdcacm.c deleted file mode 100644 index 6ef4806..0000000 --- a/libmaple/usb/usb_cdcacm.c +++ /dev/null @@ -1,762 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2011 LeafLabs LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -/** - * @file libmaple/usb/usb_cdcacm.c - * @brief USB CDC ACM (a.k.a. virtual serial terminal, VCOM). - * - * FIXME: this works on the STM32F1 USB peripherals, and probably no - * place else. Nonportable bits really need to be factored out, and - * the result made cleaner. - */ - -#include - -#include -#include -#include - -/* Private headers */ -#include "usb_descriptors.h" -#include "usb_lib_globals.h" -#include "usb_reg_map.h" - -/* usb_lib headers */ -#include "usb_type.h" -#include "usb_core.h" -#include "usb_def.h" - -/****************************************************************************** - ****************************************************************************** - *** - *** HACK ALERT! FIXME FIXME FIXME FIXME! - *** - *** A bunch of LeafLabs-specific configuration lives in here for - *** now. This mess REALLY needs to get teased apart, with - *** appropriate pieces moved into Wirish. - *** - ****************************************************************************** - *****************************************************************************/ - -#if !(defined(BOARD_maple) || defined(BOARD_maple_RET6) || \ - defined(BOARD_maple_mini) || defined(BOARD_maple_native)) -#warning USB CDC ACM relies on LeafLabs board-specific configuration.\ - You may have problems on non-LeafLabs boards. -#endif - -static void vcomDataTxCb(void); -static void vcomDataRxCb(void); -static uint8* vcomGetSetLineCoding(uint16); - -static void usbInit(void); -static void usbReset(void); -static RESULT usbDataSetup(uint8 request); -static RESULT usbNoDataSetup(uint8 request); -static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting); -static uint8* usbGetDeviceDescriptor(uint16 length); -static uint8* usbGetConfigDescriptor(uint16 length); -static uint8* usbGetStringDescriptor(uint16 length); -static void usbSetConfiguration(void); -static void usbSetDeviceAddress(void); - -static void wait_reset(void); - -/* - * VCOM config - */ - -#define VCOM_CTRL_EPNUM 0x00 -#define VCOM_CTRL_RX_ADDR 0x40 -#define VCOM_CTRL_TX_ADDR 0x80 -#define VCOM_CTRL_EPSIZE 0x40 - -#define VCOM_TX_ENDP 1 -#define VCOM_TX_EPNUM 0x01 -#define VCOM_TX_ADDR 0xC0 -#define VCOM_TX_EPSIZE 0x40 - -#define VCOM_NOTIFICATION_ENDP 2 -#define VCOM_NOTIFICATION_EPNUM 0x02 -#define VCOM_NOTIFICATION_ADDR 0x100 -#define VCOM_NOTIFICATION_EPSIZE 0x40 - -#define VCOM_RX_ENDP 3 -#define VCOM_RX_EPNUM 0x03 -#define VCOM_RX_ADDR 0x110 -#define VCOM_RX_EPSIZE 0x40 -#define VCOM_RX_BUFLEN (VCOM_RX_EPSIZE*3) - -/* - * CDC ACM Requests - */ - -#define SET_LINE_CODING 0x20 -#define GET_LINE_CODING 0x21 -#define SET_COMM_FEATURE 0x02 -#define SET_CONTROL_LINE_STATE 0x22 -#define CONTROL_LINE_DTR (0x01) -#define CONTROL_LINE_RTS (0x02) - -/* - * Descriptors - */ - -#define USB_DEVICE_CLASS_CDC 0x02 -#define USB_DEVICE_SUBCLASS_CDC 0x00 -#define LEAFLABS_ID_VENDOR 0x1EAF -#define MAPLE_ID_PRODUCT 0x0004 -const USB_Descriptor_Device usbVcomDescriptor_Device = { - .bLength = sizeof(USB_Descriptor_Device), - .bDescriptorType = USB_DESCRIPTOR_TYPE_DEVICE, - .bcdUSB = 0x0200, - .bDeviceClass = USB_DEVICE_CLASS_CDC, - .bDeviceSubClass = USB_DEVICE_SUBCLASS_CDC, - .bDeviceProtocol = 0x00, - .bMaxPacketSize0 = 0x40, - .idVendor = LEAFLABS_ID_VENDOR, - .idProduct = MAPLE_ID_PRODUCT, - .bcdDevice = 0x0200, - .iManufacturer = 0x01, - .iProduct = 0x02, - .iSerialNumber = 0x00, - .bNumConfigurations = 0x01, -}; - -#define MAX_POWER (100 >> 1) -const USB_Descriptor_Config usbVcomDescriptor_Config = { - .Config_Header = { - .bLength = sizeof(USB_Descriptor_Config_Header), - .bDescriptorType = USB_DESCRIPTOR_TYPE_CONFIGURATION, - .wTotalLength = sizeof(USB_Descriptor_Config), - .bNumInterfaces = 0x02, - .bConfigurationValue = 0x01, - .iConfiguration = 0x00, - .bmAttributes = (USB_CONFIG_ATTR_BUSPOWERED | - USB_CONFIG_ATTR_SELF_POWERED), - .bMaxPower = MAX_POWER, - }, - - .CCI_Interface = { - .bLength = sizeof(USB_Descriptor_Interface), - .bDescriptorType = USB_DESCRIPTOR_TYPE_INTERFACE, - .bInterfaceNumber = 0x00, - .bAlternateSetting = 0x00, - .bNumEndpoints = 0x01, - .bInterfaceClass = USB_INTERFACE_CLASS_CDC, - .bInterfaceSubClass = USB_INTERFACE_SUBCLASS_CDC_ACM, - .bInterfaceProtocol = 0x01, /* Common AT Commands */ - .iInterface = 0x00, - }, - - .CDC_Functional_IntHeader = { - .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), - .bDescriptorType = 0x24, - .SubType = 0x00, - .Data = {0x01, 0x10}, - }, - - .CDC_Functional_CallManagement = { - .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), - .bDescriptorType = 0x24, - .SubType = 0x01, - .Data = {0x03, 0x01}, - }, - - .CDC_Functional_ACM = { - .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(1), - .bDescriptorType = 0x24, - .SubType = 0x02, - .Data = {0x06}, - }, - - .CDC_Functional_Union = { - .bLength = CDC_FUNCTIONAL_DESCRIPTOR_SIZE(2), - .bDescriptorType = 0x24, - .SubType = 0x06, - .Data = {0x00, 0x01}, - }, - - .ManagementEndpoint = { - .bLength = sizeof(USB_Descriptor_Endpoint), - .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, - .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN | - VCOM_NOTIFICATION_EPNUM), - .bmAttributes = EP_TYPE_INTERRUPT, - .wMaxPacketSize = VCOM_NOTIFICATION_EPSIZE, - .bInterval = 0xFF, - }, - - .DCI_Interface = { - .bLength = sizeof(USB_Descriptor_Interface), - .bDescriptorType = USB_DESCRIPTOR_TYPE_INTERFACE, - .bInterfaceNumber = 0x01, - .bAlternateSetting = 0x00, - .bNumEndpoints = 0x02, - .bInterfaceClass = USB_INTERFACE_CLASS_DIC, - .bInterfaceSubClass = 0x00, /* None */ - .bInterfaceProtocol = 0x00, /* None */ - .iInterface = 0x00, - }, - - .DataOutEndpoint = { - .bLength = sizeof(USB_Descriptor_Endpoint), - .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, - .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_OUT | VCOM_RX_EPNUM), - .bmAttributes = EP_TYPE_BULK, - .wMaxPacketSize = VCOM_RX_EPSIZE, - .bInterval = 0x00, - }, - - .DataInEndpoint = { - .bLength = sizeof(USB_Descriptor_Endpoint), - .bDescriptorType = USB_DESCRIPTOR_TYPE_ENDPOINT, - .bEndpointAddress = (USB_DESCRIPTOR_ENDPOINT_IN | VCOM_TX_EPNUM), - .bmAttributes = EP_TYPE_BULK, - .wMaxPacketSize = VCOM_TX_EPSIZE, - .bInterval = 0x00, - }, -}; - -/* - String Identifiers: - - we may choose to specify any or none of the following string - identifiers: - - iManufacturer: LeafLabs - iProduct: Maple - iSerialNumber: NONE - iConfiguration: NONE - iInterface(CCI): NONE - iInterface(DCI): NONE - - additionally we must provide the unicode language identifier, - which is 0x0409 for US English -*/ - -const uint8 usbVcomDescriptor_LangID[USB_DESCRIPTOR_STRING_LEN(1)] = { - USB_DESCRIPTOR_STRING_LEN(1), - USB_DESCRIPTOR_TYPE_STRING, - 0x09, - 0x04, -}; - -const uint8 usbVcomDescriptor_iManufacturer[USB_DESCRIPTOR_STRING_LEN(8)] = { - USB_DESCRIPTOR_STRING_LEN(8), - USB_DESCRIPTOR_TYPE_STRING, - 'L', 0, 'e', 0, 'a', 0, 'f', 0, - 'L', 0, 'a', 0, 'b', 0, 's', 0, -}; - -const uint8 usbVcomDescriptor_iProduct[USB_DESCRIPTOR_STRING_LEN(8)] = { - USB_DESCRIPTOR_STRING_LEN(8), - USB_DESCRIPTOR_TYPE_STRING, - 'M', 0, 'a', 0, 'p', 0, 'l', 0, - 'e', 0, ' ', 0, ' ', 0, ' ', 0 -}; - -ONE_DESCRIPTOR Device_Descriptor = { - (uint8*)&usbVcomDescriptor_Device, - sizeof(USB_Descriptor_Device) -}; - -ONE_DESCRIPTOR Config_Descriptor = { - (uint8*)&usbVcomDescriptor_Config, - sizeof(USB_Descriptor_Config) -}; - -ONE_DESCRIPTOR String_Descriptor[3] = { - {(uint8*)&usbVcomDescriptor_LangID, USB_DESCRIPTOR_STRING_LEN(1)}, - {(uint8*)&usbVcomDescriptor_iManufacturer,USB_DESCRIPTOR_STRING_LEN(8)}, - {(uint8*)&usbVcomDescriptor_iProduct, USB_DESCRIPTOR_STRING_LEN(8)} -}; - -/* - * Etc. - */ - -typedef enum { - DTR_UNSET, - DTR_HIGH, - DTR_NEGEDGE, - DTR_LOW -} RESET_STATE; - -typedef struct { - uint32 bitrate; - uint8 format; - uint8 paritytype; - uint8 datatype; -} USB_Line_Coding; - -uint8 last_request = 0; -USB_Line_Coding line_coding = { - .bitrate = 115200, - .format = 0x00, /* stop bits-1 */ - .paritytype = 0x00, - .datatype = 0x08 -}; -uint8 vcomBufferRx[VCOM_RX_BUFLEN]; -volatile uint32 countTx = 0; -volatile uint32 recvBufIn = 0; -volatile uint32 recvBufOut = 0; -volatile uint32 maxNewBytes = VCOM_RX_BUFLEN; -volatile uint32 newBytes = 0; -RESET_STATE reset_state = DTR_UNSET; -uint8 line_dtr_rts = 0; - -/* - * Endpoint callbacks - */ - -static void (*ep_int_in[7])(void) = - {vcomDataTxCb, - NOP_Process, - NOP_Process, - NOP_Process, - NOP_Process, - NOP_Process, - NOP_Process}; - -static void (*ep_int_out[7])(void) = - {NOP_Process, - NOP_Process, - vcomDataRxCb, - NOP_Process, - NOP_Process, - NOP_Process, - NOP_Process}; - -/* - * Globals required by usb_lib/ - */ - -#define NUM_ENDPTS 0x04 -DEVICE Device_Table = { - .Total_Endpoint = NUM_ENDPTS, - .Total_Configuration = 1 -}; - -#define MAX_PACKET_SIZE 0x40 /* 64B, maximum for USB FS Devices */ -DEVICE_PROP Device_Property = { - .Init = usbInit, - .Reset = usbReset, - .Process_Status_IN = NOP_Process, - .Process_Status_OUT = NOP_Process, - .Class_Data_Setup = usbDataSetup, - .Class_NoData_Setup = usbNoDataSetup, - .Class_Get_Interface_Setting = usbGetInterfaceSetting, - .GetDeviceDescriptor = usbGetDeviceDescriptor, - .GetConfigDescriptor = usbGetConfigDescriptor, - .GetStringDescriptor = usbGetStringDescriptor, - .RxEP_buffer = NULL, - .MaxPacketSize = MAX_PACKET_SIZE -}; - -USER_STANDARD_REQUESTS User_Standard_Requests = { - .User_GetConfiguration = NOP_Process, - .User_SetConfiguration = usbSetConfiguration, - .User_GetInterface = NOP_Process, - .User_SetInterface = NOP_Process, - .User_GetStatus = NOP_Process, - .User_ClearFeature = NOP_Process, - .User_SetEndPointFeature = NOP_Process, - .User_SetDeviceFeature = NOP_Process, - .User_SetDeviceAddress = usbSetDeviceAddress -}; - -/* - * CDC ACM interface - */ - -void usb_cdcacm_enable(gpio_dev *disc_dev, uint8 disc_bit) { - /* Present ourselves to the host */ - gpio_set_mode(disc_dev, disc_bit, GPIO_OUTPUT_PP); - gpio_write_bit(disc_dev, disc_bit, 0); // presents us to the host - - /* initialize USB peripheral */ - usb_init_usblib(USBLIB, ep_int_in, ep_int_out); -} - -void usb_cdcacm_disable(gpio_dev *disc_dev, uint8 disc_bit) { - // These are just guesses about how to do this, but it seems to work. - // TODO: verify this with USB spec - nvic_irq_disable(NVIC_USB_LP_CAN_RX0); - gpio_write_bit(disc_dev, disc_bit, 1); -} - -void usb_cdcacm_putc(char ch) { - while (!usb_cdcacm_tx((uint8*)&ch, 1)) - ; -} - -/* This function is non-blocking. - * - * It copies data from a usercode buffer into the USB peripheral TX - * buffer and return the number placed in that buffer. - */ -uint32 usb_cdcacm_tx(const uint8* buf, uint32 len) { - /* Last transmission hasn't finished, abort */ - if (countTx) { - return 0; - } - - // We can only put VCOM_TX_EPSIZE bytes in the buffer - /* FIXME then why are we only copying half as many? */ - if (len > VCOM_TX_EPSIZE / 2) { - len = VCOM_TX_EPSIZE / 2; - } - - // Try to load some bytes if we can - if (len) { - usb_copy_to_pma(buf, len, VCOM_TX_ADDR); - usb_set_ep_tx_count(VCOM_TX_ENDP, len); - countTx += len; - usb_set_ep_tx_stat(VCOM_TX_ENDP, USB_EP_STAT_TX_VALID); - } - - return len; -} - -/* returns the number of available bytes are in the recv FIFO */ -uint32 usb_cdcacm_data_available(void) { - return newBytes; -} - -uint16 usb_cdcacm_get_pending() { - return countTx; -} - -/* Nonblocking byte receive. - * - * Copies up to len bytes from our private data buffer (*NOT* the PMA) - * into buf and deq's the FIFO. */ -uint32 usb_cdcacm_rx(uint8* buf, uint32 len) { - static int offset = 0; - int i; - - if (len > newBytes) { - len = newBytes; - } - - for (i = 0; i < len; i++) { - buf[i] = vcomBufferRx[i + offset]; - } - - newBytes -= len; - offset += len; - - /* Re-enable the RX endpoint, which we had set to receive 0 bytes */ - if (newBytes == 0) { - usb_set_ep_rx_count(VCOM_RX_ENDP, VCOM_RX_EPSIZE); - usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_VALID); - offset = 0; - } - - return len; -} - -uint8 usb_cdcacm_get_dtr() { - return ((line_dtr_rts & CONTROL_LINE_DTR) != 0); -} - -uint8 usb_cdcacm_get_rts() { - return ((line_dtr_rts & CONTROL_LINE_RTS) != 0); -} - -/* - * Callbacks - */ - -static void vcomDataTxCb(void) { - /* assumes tx transactions are atomic 64 bytes (nearly certain they are) */ - countTx = 0; -} - -#define EXC_RETURN 0xFFFFFFF9 -#define DEFAULT_CPSR 0x61000000 -static void vcomDataRxCb(void) { - /* FIXME this is mad buggy */ - - /* setEPRxCount on the previous cycle should garuntee - we havnt received more bytes than we can fit */ - newBytes = usb_get_ep_rx_count(VCOM_RX_ENDP); - usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_NAK); - - /* magic number, {0x31, 0x45, 0x41, 0x46} is "1EAF" */ - uint8 chkBuf[4]; - uint8 cmpBuf[4] = {0x31, 0x45, 0x41, 0x46}; - if (reset_state == DTR_NEGEDGE) { - reset_state = DTR_LOW; - - if (newBytes >= 4) { - unsigned int target = (unsigned int)wait_reset | 0x1; - - usb_copy_from_pma(chkBuf, 4, VCOM_RX_ADDR); - - int i; - USB_Bool cmpMatch = TRUE; - for (i = 0; i < 4; i++) { - if (chkBuf[i] != cmpBuf[i]) { - cmpMatch = FALSE; - } - } - - if (cmpMatch) { - asm volatile("mov r0, %[stack_top] \n\t" // Reset stack - "mov sp, r0 \n\t" - "mov r0, #1 \n\t" - "mov r1, %[target_addr] \n\t" - "mov r2, %[cpsr] \n\t" - "push {r2} \n\t" // Fake xPSR - "push {r1} \n\t" // PC target addr - "push {r0} \n\t" // Fake LR - "push {r0} \n\t" // Fake R12 - "push {r0} \n\t" // Fake R3 - "push {r0} \n\t" // Fake R2 - "push {r0} \n\t" // Fake R1 - "push {r0} \n\t" // Fake R0 - "mov lr, %[exc_return] \n\t" - "bx lr" - : - : [stack_top] "r" (STACK_TOP), - [target_addr] "r" (target), - [exc_return] "r" (EXC_RETURN), - [cpsr] "r" (DEFAULT_CPSR) - : "r0", "r1", "r2"); - /* should never get here */ - } - } - } - - usb_copy_from_pma(vcomBufferRx, newBytes, VCOM_RX_ADDR); -} - -static uint8* vcomGetSetLineCoding(uint16 length) { - if (length == 0) { - pInformation->Ctrl_Info.Usb_wLength = sizeof(USB_Line_Coding); - } - return (uint8*)&line_coding; -} - -static void usbInit(void) { - pInformation->Current_Configuration = 0; - - USB_BASE->CNTR = USB_CNTR_FRES; - - USBLIB->irq_mask = 0; - USB_BASE->CNTR = USBLIB->irq_mask; - USB_BASE->ISTR = 0; - USBLIB->irq_mask = USB_CNTR_RESETM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; - USB_BASE->CNTR = USBLIB->irq_mask; - - USB_BASE->ISTR = 0; - USBLIB->irq_mask = USB_ISR_MSK; - USB_BASE->CNTR = USBLIB->irq_mask; - - nvic_irq_enable(NVIC_USB_LP_CAN_RX0); - USBLIB->state = USB_UNCONNECTED; -} - -/* choose addresses to give endpoints the max 64 byte buffers */ -#define BTABLE_ADDRESS 0x00 -static void usbReset(void) { - pInformation->Current_Configuration = 0; - - /* current feature is current bmAttributes */ - pInformation->Current_Feature = (USB_CONFIG_ATTR_BUSPOWERED | - USB_CONFIG_ATTR_SELF_POWERED); - - USB_BASE->BTABLE = BTABLE_ADDRESS; - - /* setup control endpoint 0 */ - usb_set_ep_type(USB_EP0, USB_EP_EP_TYPE_CONTROL); - usb_set_ep_tx_stat(USB_EP0, USB_EP_STAT_TX_STALL); - usb_set_ep_rx_addr(USB_EP0, VCOM_CTRL_RX_ADDR); - usb_set_ep_tx_addr(USB_EP0, VCOM_CTRL_TX_ADDR); - usb_clear_status_out(USB_EP0); - - usb_set_ep_rx_count(USB_EP0, pProperty->MaxPacketSize); - usb_set_ep_rx_stat(USB_EP0, USB_EP_STAT_RX_VALID); - - /* setup management endpoint 1 */ - usb_set_ep_type(VCOM_NOTIFICATION_ENDP, USB_EP_EP_TYPE_INTERRUPT); - usb_set_ep_tx_addr(VCOM_NOTIFICATION_ENDP, VCOM_NOTIFICATION_ADDR); - usb_set_ep_tx_stat(VCOM_NOTIFICATION_ENDP, USB_EP_STAT_TX_NAK); - usb_set_ep_rx_stat(VCOM_NOTIFICATION_ENDP, USB_EP_STAT_RX_DISABLED); - - /* TODO figure out differences in style between RX/TX EP setup */ - - /* set up data endpoint OUT (RX) */ - usb_set_ep_type(VCOM_RX_ENDP, USB_EP_EP_TYPE_BULK); - usb_set_ep_rx_addr(VCOM_RX_ENDP, 0x110); - usb_set_ep_rx_count(VCOM_RX_ENDP, 64); - usb_set_ep_rx_stat(VCOM_RX_ENDP, USB_EP_STAT_RX_VALID); - - /* set up data endpoint IN (TX) */ - usb_set_ep_type(VCOM_TX_ENDP, USB_EP_EP_TYPE_BULK); - usb_set_ep_tx_addr(VCOM_TX_ENDP, VCOM_TX_ADDR); - usb_set_ep_tx_stat(VCOM_TX_ENDP, USB_EP_STAT_TX_NAK); - usb_set_ep_rx_stat(VCOM_TX_ENDP, USB_EP_STAT_RX_DISABLED); - - USBLIB->state = USB_ATTACHED; - SetDeviceAddress(0); - - /* reset the rx fifo */ - recvBufIn = 0; - recvBufOut = 0; - maxNewBytes = VCOM_RX_EPSIZE; - countTx = 0; -} - -static RESULT usbDataSetup(uint8 request) { - uint8 *(*CopyRoutine)(uint16); - CopyRoutine = NULL; - - if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) { - switch (request) { - case (GET_LINE_CODING): - CopyRoutine = vcomGetSetLineCoding; - last_request = GET_LINE_CODING; - break; - case (SET_LINE_CODING): - CopyRoutine = vcomGetSetLineCoding; - last_request = SET_LINE_CODING; - break; - default: - break; - } - } - - if (CopyRoutine == NULL) { - return USB_UNSUPPORT; - } - - pInformation->Ctrl_Info.CopyData = CopyRoutine; - pInformation->Ctrl_Info.Usb_wOffset = 0; - (*CopyRoutine)(0); - return USB_SUCCESS; -} - -static RESULT usbNoDataSetup(uint8 request) { - uint8 new_signal; - - /* we support set com feature but dont handle it */ - if (Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT)) { - - switch (request) { - case (SET_COMM_FEATURE): - return USB_SUCCESS; - case (SET_CONTROL_LINE_STATE): - /* to reset the board, pull both dtr and rts low - then pulse dtr by itself */ - new_signal = (pInformation->USBwValues.bw.bb0 & - (CONTROL_LINE_DTR | CONTROL_LINE_RTS)); - line_dtr_rts = new_signal & 0x03; - - switch (reset_state) { - /* no default, covered enum */ - case DTR_UNSET: - if ((new_signal & CONTROL_LINE_DTR) == 0 ) { - reset_state = DTR_LOW; - } else { - reset_state = DTR_HIGH; - } - break; - - case DTR_HIGH: - if ((new_signal & CONTROL_LINE_DTR) == 0 ) { - reset_state = DTR_NEGEDGE; - } else { - reset_state = DTR_HIGH; - } - break; - - case DTR_NEGEDGE: - if ((new_signal & CONTROL_LINE_DTR) == 0 ) { - reset_state = DTR_LOW; - } else { - reset_state = DTR_HIGH; - } - break; - - case DTR_LOW: - if ((new_signal & CONTROL_LINE_DTR) == 0 ) { - reset_state = DTR_LOW; - } else { - reset_state = DTR_HIGH; - } - break; - } - - return USB_SUCCESS; - } - } - return USB_UNSUPPORT; -} - -static RESULT usbGetInterfaceSetting(uint8 interface, uint8 alt_setting) { - if (alt_setting > 0) { - return USB_UNSUPPORT; - } else if (interface > 1) { - return USB_UNSUPPORT; - } - - return USB_SUCCESS; -} - -static uint8* usbGetDeviceDescriptor(uint16 length) { - return Standard_GetDescriptorData(length, &Device_Descriptor); -} - -static uint8* usbGetConfigDescriptor(uint16 length) { - return Standard_GetDescriptorData(length, &Config_Descriptor); -} - -static uint8* usbGetStringDescriptor(uint16 length) { - uint8 wValue0 = pInformation->USBwValue0; - - if (wValue0 > 2) { - return NULL; - } - return Standard_GetDescriptorData(length, &String_Descriptor[wValue0]); -} - -static void usbSetConfiguration(void) { - if (pInformation->Current_Configuration != 0) { - USBLIB->state = USB_CONFIGURED; - } -} - -static void usbSetDeviceAddress(void) { - USBLIB->state = USB_ADDRESSED; -} - -#define RESET_DELAY 100000 -static void wait_reset(void) { - delay_us(RESET_DELAY); - nvic_sys_reset(); -} diff --git a/libmaple/usb/usb_descriptors.h b/libmaple/usb/usb_descriptors.h deleted file mode 100644 index 9bcb2b6..0000000 --- a/libmaple/usb/usb_descriptors.h +++ /dev/null @@ -1,148 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2010 LeafLabs LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -#ifndef _USB_DESCRIPTORS_H_ -#define _USB_DESCRIPTORS_H_ - -#include - -#define USB_DESCRIPTOR_TYPE_DEVICE 0x01 -#define USB_DESCRIPTOR_TYPE_CONFIGURATION 0x02 -#define USB_DESCRIPTOR_TYPE_STRING 0x03 -#define USB_DESCRIPTOR_TYPE_INTERFACE 0x04 -#define USB_DESCRIPTOR_TYPE_ENDPOINT 0x05 - -#define USB_DEVICE_CLASS_CDC 0x02 -#define USB_DEVICE_SUBCLASS_CDC 0x00 -#define USB_INTERFACE_CLASS_CDC 0x02 -/* CDC Abstract Control Model */ -#define USB_INTERFACE_SUBCLASS_CDC_ACM 0x02 -#define USB_INTERFACE_CLASS_DIC 0x0A - -#define USB_CONFIG_ATTR_BUSPOWERED 0b10000000 -#define USB_CONFIG_ATTR_SELF_POWERED 0b11000000 - -#define EP_TYPE_INTERRUPT 0x03 -#define EP_TYPE_BULK 0x02 - -#define USB_DESCRIPTOR_ENDPOINT_IN 0x80 -#define USB_DESCRIPTOR_ENDPOINT_OUT 0x00 - -#define USB_DESCRIPTOR_STRING_LEN(x) (2 + (x << 1)) - -#if defined(__cplusplus) -extern "C" { -#endif - -#define USB_DESCRIPTOR_STRING(len) \ - struct { \ - uint8 bLength; \ - uint8 bDescriptorType; \ - uint16 bString[len]; \ - } __packed - -#define CDC_FUNCTIONAL_DESCRIPTOR_SIZE(DataSize) (3 + DataSize) -#define CDC_FUNCTIONAL_DESCRIPTOR(DataSize) \ - struct { \ - uint8 bLength; \ - uint8 bDescriptorType; \ - uint8 SubType; \ - uint8 Data[DataSize]; \ - } __packed - -typedef struct { - uint8 bLength; - uint8 bDescriptorType; - uint16 bcdUSB; - uint8 bDeviceClass; - uint8 bDeviceSubClass; - uint8 bDeviceProtocol; - uint8 bMaxPacketSize0; - uint16 idVendor; - uint16 idProduct; - uint16 bcdDevice; - uint8 iManufacturer; - uint8 iProduct; - uint8 iSerialNumber; - uint8 bNumConfigurations; -} __packed USB_Descriptor_Device; - -typedef struct { - uint8 bLength; - uint8 bDescriptorType; - uint16 wTotalLength; - uint8 bNumInterfaces; - uint8 bConfigurationValue; - uint8 iConfiguration; - uint8 bmAttributes; - uint8 bMaxPower; -} __packed USB_Descriptor_Config_Header; - -typedef struct { - uint8 bLength; - uint8 bDescriptorType; - uint8 bInterfaceNumber; - uint8 bAlternateSetting; - uint8 bNumEndpoints; - uint8 bInterfaceClass; - uint8 bInterfaceSubClass; - uint8 bInterfaceProtocol; - uint8 iInterface; -} __packed USB_Descriptor_Interface; - -typedef struct { - uint8 bLength; - uint8 bDescriptorType; - uint8 bEndpointAddress; - uint8 bmAttributes; - uint16 wMaxPacketSize; - uint8 bInterval; -} __packed USB_Descriptor_Endpoint; - -typedef struct { - USB_Descriptor_Config_Header Config_Header; - USB_Descriptor_Interface CCI_Interface; - CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_IntHeader; - CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_CallManagement; - CDC_FUNCTIONAL_DESCRIPTOR(1) CDC_Functional_ACM; - CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_Union; - USB_Descriptor_Endpoint ManagementEndpoint; - USB_Descriptor_Interface DCI_Interface; - USB_Descriptor_Endpoint DataOutEndpoint; - USB_Descriptor_Endpoint DataInEndpoint; -} __packed USB_Descriptor_Config; - -typedef struct { - uint8 bLength; - uint8 bDescriptorType; - uint16 bString[]; -} USB_Descriptor_String; - -#if defined(__cplusplus) -} -#endif - -#endif diff --git a/libmaple/usb/usb_lib_globals.h b/libmaple/usb/usb_lib_globals.h deleted file mode 100644 index 1cd2754..0000000 --- a/libmaple/usb/usb_lib_globals.h +++ /dev/null @@ -1,55 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2011 LeafLabs LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -#ifndef _USB_LIB_GLOBALS_H_ -#define _USB_LIB_GLOBALS_H_ - -/* usb_lib headers */ -#include "usb_type.h" -#include "usb_core.h" - -#ifdef __cplusplus -extern "C" { -#endif - -extern USER_STANDARD_REQUESTS User_Standard_Requests; -extern USER_STANDARD_REQUESTS *pUser_Standard_Requests; - -extern DEVICE_PROP Device_Property; -extern DEVICE_PROP *pProperty; - -extern DEVICE_INFO Device_Info; -extern DEVICE_INFO *pInformation; - -extern DEVICE Device_Table; -extern u16 SaveRState; -extern u16 SaveTState; - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/libmaple/usb/usb_reg_map.c b/libmaple/usb/usb_reg_map.c deleted file mode 100644 index 75562e1..0000000 --- a/libmaple/usb/usb_reg_map.c +++ /dev/null @@ -1,79 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2011 LeafLabs, LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -#include "usb_reg_map.h" - -/* TODO these could use some improvement; they're fairly - * straightforward ports of the analogous ST code. The PMA blit - * routines in particular are obvious targets for performance - * measurement and tuning. */ - -void usb_copy_to_pma(const uint8 *buf, uint16 len, uint16 pma_offset) { - uint16 *dst = (uint16*)usb_pma_ptr(pma_offset); - uint16 n = len >> 1; - uint16 i; - for (i = 0; i < n; i++) { - *dst = (uint16)(*buf) | *(buf + 1) << 8; - buf += 2; - dst += 2; - } - if (len & 1) { - *dst = *buf; - } -} - -void usb_copy_from_pma(uint8 *buf, uint16 len, uint16 pma_offset) { - uint32 *src = (uint32*)usb_pma_ptr(pma_offset); - uint16 *dst = (uint16*)buf; - uint16 n = len >> 1; - uint16 i; - for (i = 0; i < n; i++) { - *dst++ = *src++; - } - if (len & 1) { - *dst = *src & 0xFF; - } -} - -void usb_set_ep_rx_count(uint8 ep, uint16 count) { - uint32 *rxc = usb_ep_rx_count_ptr(ep); - uint16 nblocks; - if (count > 62) { - /* use 32-byte memory block size */ - nblocks = count >> 5; - if ((count & 0x1F) == 0) { - nblocks--; - } - *rxc = (nblocks << 10) | 0x8000; - } else { - /* use 2-byte memory block size */ - nblocks = count >> 1; - if ((count & 0x1) != 0) { - nblocks++; - } - *rxc = nblocks << 10; - } -} diff --git a/libmaple/usb/usb_reg_map.h b/libmaple/usb/usb_reg_map.h deleted file mode 100644 index ce80842..0000000 --- a/libmaple/usb/usb_reg_map.h +++ /dev/null @@ -1,433 +0,0 @@ -/****************************************************************************** - * The MIT License - * - * Copyright (c) 2011 LeafLabs, LLC. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - *****************************************************************************/ - -#include -#include - -#ifndef _USB_REG_MAP_H_ -#define _USB_REG_MAP_H_ - -/* TODO: - * - Pick one of "endp", "ep" "endpt" - */ - -/* - * Register map and base pointer - */ - -#define USB_NR_EP_REGS 8 - -/** USB register map type */ -typedef struct usb_reg_map { - __io uint32 EP[USB_NR_EP_REGS]; /**< Endpoint registers */ - const uint32 RESERVED[8]; /**< Reserved */ - __io uint32 CNTR; /**< Control register */ - __io uint32 ISTR; /**< Interrupt status register */ - __io uint32 FNR; /**< Frame number register */ - __io uint32 DADDR; /**< Device address */ - __io uint32 BTABLE; /**< @brief Buffer table address - * - * Address offset within the USB - * packet memory area which points - * to the base of the buffer - * descriptor table. Must be - * aligned to an 8 byte boundary. - */ -} usb_reg_map; - -/** USB register map base pointer */ -#define USB_BASE ((struct usb_reg_map*)0x40005C00) - -/* - * Register bit definitions - */ - -/* Endpoint registers (USB_EPnR) */ - -#define USB_EP_CTR_RX_BIT 15 -#define USB_EP_DTOG_RX_BIT 14 -#define USB_EP_SETUP_BIT 11 -#define USB_EP_EP_KIND_BIT 8 -#define USB_EP_CTR_TX_BIT 7 -#define USB_EP_DTOG_TX_BIT 6 - -#define USB_EP_CTR_RX BIT(USB_EP_CTR_RX_BIT) -#define USB_EP_DTOG_RX BIT(USB_EP_DTOG_RX_BIT) -#define USB_EP_STAT_RX (0x3 << 12) -#define USB_EP_STAT_RX_DISABLED (0x0 << 12) -#define USB_EP_STAT_RX_STALL (0x1 << 12) -#define USB_EP_STAT_RX_NAK (0x2 << 12) -#define USB_EP_STAT_RX_VALID (0x3 << 12) -#define USB_EP_SETUP BIT(USB_EP_SETUP_BIT) -#define USB_EP_EP_TYPE (0x3 << 9) -#define USB_EP_EP_TYPE_BULK (0x0 << 9) -#define USB_EP_EP_TYPE_CONTROL (0x1 << 9) -#define USB_EP_EP_TYPE_ISO (0x2 << 9) -#define USB_EP_EP_TYPE_INTERRUPT (0x3 << 9) -#define USB_EP_EP_KIND BIT(USB_EP_EP_KIND_BIT) -#define USB_EP_CTR_TX BIT(USB_EP_CTR_TX_BIT) -#define USB_EP_DTOG_TX BIT(USB_EP_DTOG_TX_BIT) -#define USB_EP_STAT_TX (0x3 << 4) -#define USB_EP_STAT_TX_DISABLED (0x0 << 4) -#define USB_EP_STAT_TX_STALL (0x1 << 4) -#define USB_EP_STAT_TX_NAK (0x2 << 4) -#define USB_EP_STAT_TX_VALID (0x3 << 4) -#define USB_EP_EA 0xF - -/* Control register (USB_CNTR) */ - -#define USB_CNTR_CTRM_BIT 15 -#define USB_CNTR_PMAOVERM_BIT 14 -#define USB_CNTR_ERRM_BIT 13 -#define USB_CNTR_WKUPM_BIT 12 -#define USB_CNTR_SUSPM_BIT 11 -#define USB_CNTR_RESETM_BIT 10 -#define USB_CNTR_SOFM_BIT 9 -#define USB_CNTR_ESOFM_BIT 8 -#define USB_CNTR_RESUME_BIT 4 -#define USB_CNTR_FSUSP_BIT 3 -#define USB_CNTR_LP_MODE_BIT 2 -#define USB_CNTR_PDWN_BIT 1 -#define USB_CNTR_FRES_BIT 0 - -#define USB_CNTR_CTRM BIT(USB_CNTR_CTRM_BIT) -#define USB_CNTR_PMAOVERM BIT(USB_CNTR_PMAOVERM_BIT) -#define USB_CNTR_ERRM BIT(USB_CNTR_ERRM_BIT) -#define USB_CNTR_WKUPM BIT(USB_CNTR_WKUPM_BIT) -#define USB_CNTR_SUSPM BIT(USB_CNTR_SUSPM_BIT) -#define USB_CNTR_RESETM BIT(USB_CNTR_RESETM_BIT) -#define USB_CNTR_SOFM BIT(USB_CNTR_SOFM_BIT) -#define USB_CNTR_ESOFM BIT(USB_CNTR_ESOFM_BIT) -#define USB_CNTR_RESUME BIT(USB_CNTR_RESUME_BIT) -#define USB_CNTR_FSUSP BIT(USB_CNTR_FSUSP_BIT) -#define USB_CNTR_LP_MODE BIT(USB_CNTR_LP_MODE_BIT) -#define USB_CNTR_PDWN BIT(USB_CNTR_PDWN_BIT) -#define USB_CNTR_FRES BIT(USB_CNTR_FRES_BIT) - -/* Interrupt status register (USB_ISTR) */ - -#define USB_ISTR_CTR_BIT 15 -#define USB_ISTR_PMAOVR_BIT 14 -#define USB_ISTR_ERR_BIT 13 -#define USB_ISTR_WKUP_BIT 12 -#define USB_ISTR_SUSP_BIT 11 -#define USB_ISTR_RESET_BIT 10 -#define USB_ISTR_SOF_BIT 9 -#define USB_ISTR_ESOF_BIT 8 -#define USB_ISTR_DIR_BIT 4 - -#define USB_ISTR_CTR BIT(USB_ISTR_CTR_BIT) -#define USB_ISTR_PMAOVR BIT(USB_ISTR_PMAOVR_BIT) -#define USB_ISTR_ERR BIT(USB_ISTR_ERR_BIT) -#define USB_ISTR_WKUP BIT(USB_ISTR_WKUP_BIT) -#define USB_ISTR_SUSP BIT(USB_ISTR_SUSP_BIT) -#define USB_ISTR_RESET BIT(USB_ISTR_RESET_BIT) -#define USB_ISTR_SOF BIT(USB_ISTR_SOF_BIT) -#define USB_ISTR_ESOF BIT(USB_ISTR_ESOF_BIT) -#define USB_ISTR_DIR BIT(USB_ISTR_DIR_BIT) -#define USB_ISTR_EP_ID 0xF - -/* Frame number register (USB_FNR) */ - -#define USB_FNR_RXDP_BIT 15 -#define USB_FNR_RXDM_BIT 14 -#define USB_FNR_LCK_BIT 13 - -#define USB_FNR_RXDP BIT(USB_FNR_RXDP_BIT) -#define USB_FNR_RXDM BIT(USB_FNR_RXDM_BIT) -#define USB_FNR_LCK BIT(USB_FNR_LCK_BIT) -#define USB_FNR_LSOF (0x3 << 11) -#define USB_FNR_FN 0x7FF - -/* Device address (USB_DADDR) */ - -#define USB_DADDR_EF_BIT 7 -#define USB_DADDR_ADD6_BIT 6 -#define USB_DADDR_ADD5_BIT 5 -#define USB_DADDR_ADD4_BIT 4 -#define USB_DADDR_ADD3_BIT 3 -#define USB_DADDR_ADD2_BIT 2 -#define USB_DADDR_ADD1_BIT 1 -#define USB_DADDR_ADD0_BIT 0 - -#define USB_DADDR_EF BIT(USB_DADDR_EF_BIT) -#define USB_DADDR_ADD6 BIT(USB_DADDR_ADD6_BIT) -#define USB_DADDR_ADD5 BIT(USB_DADDR_ADD5_BIT) -#define USB_DADDR_ADD4 BIT(USB_DADDR_ADD4_BIT) -#define USB_DADDR_ADD3 BIT(USB_DADDR_ADD3_BIT) -#define USB_DADDR_ADD2 BIT(USB_DADDR_ADD2_BIT) -#define USB_DADDR_ADD1 BIT(USB_DADDR_ADD1_BIT) -#define USB_DADDR_ADD0 BIT(USB_DADDR_ADD0_BIT) - -/* Buffer table address (USB_BTABLE) */ - -#define USB_BTABLE_BTABLE (0x1FFF << 3) - -/* - * Register convenience routines - */ - -#define __EP_CTR_NOP (USB_EP_CTR_RX | USB_EP_CTR_TX) -#define __EP_NONTOGGLE (USB_EP_CTR_RX | USB_EP_SETUP | \ - USB_EP_EP_TYPE | USB_EP_EP_KIND | \ - USB_EP_CTR_TX | USB_EP_EA) - -static inline void usb_clear_ctr_rx(uint8 ep) { - uint32 epr = USB_BASE->EP[ep]; - USB_BASE->EP[ep] = epr & ~USB_EP_CTR_RX & __EP_NONTOGGLE; -} - -static inline void usb_clear_ctr_tx(uint8 ep) { - uint32 epr = USB_BASE->EP[ep]; - USB_BASE->EP[ep] = epr & ~USB_EP_CTR_TX & __EP_NONTOGGLE; -} - -static inline void usb_set_ep_rx_stat(uint8 ep, uint32 status) { - uint32 epr = USB_BASE->EP[ep]; - epr &= ~(USB_EP_STAT_TX | USB_EP_DTOG_RX | USB_EP_DTOG_TX); - epr |= __EP_CTR_NOP; - epr ^= status; - USB_BASE->EP[ep] = epr; -} - -static inline void usb_set_ep_tx_stat(uint8 ep, uint32 status) { - uint32 epr = USB_BASE->EP[ep]; - epr &= ~(USB_EP_STAT_RX | USB_EP_DTOG_RX | USB_EP_DTOG_TX); - epr |= __EP_CTR_NOP; - epr ^= status; - USB_BASE->EP[ep] = epr; -} - -static inline void usb_set_ep_type(uint8 ep, uint32 type) { - uint32 epr = USB_BASE->EP[ep]; - epr &= ~USB_EP_EP_TYPE & __EP_NONTOGGLE; - epr |= type; - USB_BASE->EP[ep] = epr; -} - -static inline void usb_set_ep_kind(uint8 ep, uint32 kind) { - uint32 epr = USB_BASE->EP[ep]; - epr &= ~USB_EP_EP_KIND & __EP_NONTOGGLE; - epr |= kind; - USB_BASE->EP[ep] = epr; -} - -static inline void usb_clear_status_out(uint8 ep) { - usb_set_ep_kind(ep, 0); -} - -/* - * Packet memory area (PMA) base pointer - */ - -/** - * @brief USB packet memory area (PMA) base pointer. - * - * The USB PMA is SRAM shared between USB and CAN. The USB peripheral - * accesses this memory directly via the packet buffer interface. */ -#define USB_PMA_BASE ((__io void*)0x40006000) - -/* - * PMA conveniences - */ - -void usb_copy_to_pma(const uint8 *buf, uint16 len, uint16 pma_offset); -void usb_copy_from_pma(uint8 *buf, uint16 len, uint16 pma_offset); - -static inline void* usb_pma_ptr(uint32 offset) { - return (void*)(USB_PMA_BASE + 2 * offset); -} - -/* - * BTABLE - */ - -/* (Forward-declared) BTABLE entry. - * - * The BTABLE can be viewed as an array of usb_btable_ent values; - * these vary in structure according to the configuration of the - * endpoint. - */ -union usb_btable_ent; - -/* Bidirectional endpoint BTABLE entry */ -typedef struct usb_btable_bidi { - __io uint16 addr_tx; const uint16 PAD1; - __io uint16 count_tx; const uint16 PAD2; - __io uint16 addr_rx; const uint16 PAD3; - __io uint16 count_rx; const uint16 PAD4; -} usb_btable_bidi; - -/* Unidirectional receive-only endpoint BTABLE entry */ -typedef struct usb_btable_uni_rx { - __io uint16 empty1; const uint16 PAD1; - __io uint16 empty2; const uint16 PAD2; - __io uint16 addr_rx; const uint16 PAD3; - __io uint16 count_rx; const uint16 PAD4; -} usb_btable_uni_rx; - -/* Unidirectional transmit-only endpoint BTABLE entry */ -typedef struct usb_btable_uni_tx { - __io uint16 addr_tx; const uint16 PAD1; - __io uint16 count_tx; const uint16 PAD2; - __io uint16 empty1; const uint16 PAD3; - __io uint16 empty2; const uint16 PAD4; -} usb_btable_uni_tx; - -/* Double-buffered transmission endpoint BTABLE entry */ -typedef struct usb_btable_dbl_tx { - __io uint16 addr_tx0; const uint16 PAD1; - __io uint16 count_tx0; const uint16 PAD2; - __io uint16 addr_tx1; const uint16 PAD3; - __io uint16 count_tx1; const uint16 PAD4; -} usb_btable_dbl_tx; - -/* Double-buffered reception endpoint BTABLE entry */ -typedef struct usb_btable_dbl_rx { - __io uint16 addr_rx0; const uint16 PAD1; - __io uint16 count_rx0; const uint16 PAD2; - __io uint16 addr_rx1; const uint16 PAD3; - __io uint16 count_rx1; const uint16 PAD4; -} usb_btable_dbl_rx; - -/* TODO isochronous endpoint entries */ - -/* Definition for above forward-declared BTABLE entry. */ -typedef union usb_btable_ent { - usb_btable_bidi bidi; - usb_btable_uni_rx u_rx; - usb_btable_uni_tx u_tx; - usb_btable_dbl_tx d_tx; - usb_btable_dbl_rx d_rx; -} usb_btable_ent; - -/* - * BTABLE conveniences - */ - -/* TODO (?) Convert usages of the many (and lengthily-named) - * accessors/mutators below to just manipulating usb_btable_entry - * values. */ - -static inline uint32* usb_btable_ptr(uint32 offset) { - return (uint32*)usb_pma_ptr(USB_BASE->BTABLE + offset); -} - -static inline usb_btable_ent *usb_btable(void) { - return (usb_btable_ent*)usb_btable_ptr(0); -} - -/* TX address */ - -static inline uint32* usb_ep_tx_addr_ptr(uint8 ep) { - return usb_btable_ptr(ep * 8); -} - -static inline uint16 usb_get_ep_tx_addr(uint8 ep) { - return (uint16)*usb_ep_tx_addr_ptr(ep); -} - -static inline void usb_set_ep_tx_addr(uint8 ep, uint16 addr) { - uint32 *tx_addr = usb_ep_tx_addr_ptr(ep); - *tx_addr = addr & ~0x1; -} - -/* RX address */ - -static inline uint32* usb_ep_rx_addr_ptr(uint8 ep) { - return usb_btable_ptr(ep * 8 + 4); -} - -static inline uint16 usb_get_ep_rx_addr(uint8 ep) { - return (uint16)*usb_ep_rx_addr_ptr(ep); -} - -static inline void usb_set_ep_rx_addr(uint8 ep, uint16 addr) { - uint32 *rx_addr = usb_ep_rx_addr_ptr(ep); - *rx_addr = addr & ~0x1; -} - -/* TX count (doesn't cover double-buffered and isochronous in) */ - -static inline uint32* usb_ep_tx_count_ptr(uint8 ep) { - return usb_btable_ptr(ep * 8 + 2); -} - -static inline uint16 usb_get_ep_tx_count(uint8 ep) { - return (uint16)*usb_ep_tx_count_ptr(ep); -} - -static inline void usb_set_ep_tx_count(uint8 ep, uint16 count) { - uint32 *txc = usb_ep_tx_count_ptr(ep); - *txc = count; -} - -/* RX count */ - -static inline uint32* usb_ep_rx_count_ptr(uint8 ep) { - return usb_btable_ptr(ep * 8 + 6); -} - -static inline uint16 usb_get_ep_rx_count(uint8 ep) { - return (uint16)*usb_ep_rx_count_ptr(ep) & 0x3FF; -} - -void usb_set_ep_rx_count(uint8 ep, uint16 count); - -/* - * Misc. types - */ - -typedef enum usb_ep { - USB_EP0, - USB_EP1, - USB_EP2, - USB_EP3, - USB_EP4, - USB_EP5, - USB_EP6, - USB_EP7, -} usb_ep; - -typedef enum usb_ep_type { - USB_EP_T_CTL = USB_EP_EP_TYPE_CONTROL, - USB_EP_T_BULK = USB_EP_EP_TYPE_BULK, - USB_EP_T_INT = USB_EP_EP_TYPE_INTERRUPT, - USB_EP_T_ISO = USB_EP_EP_TYPE_ISO -} usb_ep_type; - -typedef enum usb_ep_stat { - USB_EP_ST_RX_DIS = USB_EP_STAT_RX_DISABLED, - USB_EP_ST_RX_STL = USB_EP_STAT_RX_STALL, - USB_EP_ST_RX_NAK = USB_EP_STAT_RX_NAK, - USB_EP_ST_RX_VAL = USB_EP_STAT_RX_VALID, - USB_EP_ST_TX_DIS = USB_EP_STAT_TX_DISABLED, - USB_EP_ST_TX_STL = USB_EP_STAT_TX_STALL, - USB_EP_ST_TX_NAK = USB_EP_STAT_TX_NAK, - USB_EP_ST_TX_VAL = USB_EP_STAT_TX_VALID -} usb_ep_stat; - -#endif diff --git a/support/ld/stm32/series/stm32f1/value/vector_symbols.inc b/support/ld/stm32/series/stm32f1/value/vector_symbols.inc new file mode 100644 index 0000000..f8726f9 --- /dev/null +++ b/support/ld/stm32/series/stm32f1/value/vector_symbols.inc @@ -0,0 +1,78 @@ +EXTERN(__msp_init) +EXTERN(__exc_reset) +EXTERN(__exc_nmi) +EXTERN(__exc_hardfault) +EXTERN(__exc_memmanage) +EXTERN(__exc_busfault) +EXTERN(__exc_usagefault) +EXTERN(__stm32reservedexception7) +EXTERN(__stm32reservedexception8) +EXTERN(__stm32reservedexception9) +EXTERN(__stm32reservedexception10) +EXTERN(__exc_svc) +EXTERN(__exc_debug_monitor) +EXTERN(__stm32reservedexception13) +EXTERN(__exc_pendsv) +EXTERN(__exc_systick) + +EXTERN(__irq_wwdg) +EXTERN(__irq_pvd) +EXTERN(__irq_tamper) +EXTERN(__irq_rtc) +EXTERN(__irq_flash) +EXTERN(__irq_rcc) +EXTERN(__irq_exti0) +EXTERN(__irq_exti1) +EXTERN(__irq_exti2) +EXTERN(__irq_exti3) +EXTERN(__irq_exti4) +EXTERN(__irq_dma1_channel1) +EXTERN(__irq_dma1_channel2) +EXTERN(__irq_dma1_channel3) +EXTERN(__irq_dma1_channel4) +EXTERN(__irq_dma1_channel5) +EXTERN(__irq_dma1_channel6) +EXTERN(__irq_dma1_channel7) +EXTERN(__irq_adc1) +EXTERN(__stm32reservedexception14) +EXTERN(__stm32reservedexception15) +EXTERN(__stm32reservedexception16) +EXTERN(__stm32reservedexception17) +EXTERN(__irq_exti9_5) +EXTERN(__irq_tim1_brk) +EXTERN(__irq_tim1_up) +EXTERN(__irq_tim1_trg_com) +EXTERN(__irq_tim1_cc) +EXTERN(__irq_tim2) +EXTERN(__irq_tim3) +EXTERN(__irq_tim4) +EXTERN(__irq_i2c1_ev) +EXTERN(__irq_i2c1_er) +EXTERN(__irq_i2c2_ev) +EXTERN(__irq_i2c2_er) +EXTERN(__irq_spi1) +EXTERN(__irq_spi2) +EXTERN(__irq_usart1) +EXTERN(__irq_usart2) +EXTERN(__irq_usart3) +EXTERN(__irq_exti15_10) +EXTERN(__irq_rtcalarm) +EXTERN(__irq_cec) +EXTERN(__irq_tim12) +EXTERN(__irq_tim13) +EXTERN(__irq_tim14) +EXTERN(__stm32reservedexception18) +EXTERN(__stm32reservedexception19) +EXTERN(__irq_fsmc) +EXTERN(__stm32reservedexception20) +EXTERN(__irq_tim5) +EXTERN(__irq_spi3) +EXTERN(__irq_uart4) +EXTERN(__irq_uart5) +EXTERN(__irq_tim6) +EXTERN(__irq_tim7) +EXTERN(__irq_dma2_channel1) +EXTERN(__irq_dma2_channel2) +EXTERN(__irq_dma2_channel3) +EXTERN(__irq_dma2_channel4_5) +EXTERN(__irq_dma2_channel5) /* on remap only */ diff --git a/support/make/board-includes/VLDiscovery.mk b/support/make/board-includes/VLDiscovery.mk index 82d1b23..441f078 100644 --- a/support/make/board-includes/VLDiscovery.mk +++ b/support/make/board-includes/VLDiscovery.mk @@ -3,3 +3,4 @@ PRODUCT_ID := 0003 ERROR_LED_PORT := GPIOC ERROR_LED_PIN := 9 MCU_SERIES := stm32f1 +MCU_F1_LINE := value diff --git a/support/make/board-includes/maple.mk b/support/make/board-includes/maple.mk index d31ad83..4de4bab 100644 --- a/support/make/board-includes/maple.mk +++ b/support/make/board-includes/maple.mk @@ -3,3 +3,4 @@ PRODUCT_ID := 0003 ERROR_LED_PORT := GPIOA ERROR_LED_PIN := 5 MCU_SERIES := stm32f1 +MCU_F1_LINE := performance diff --git a/support/make/board-includes/maple_RET6.mk b/support/make/board-includes/maple_RET6.mk index d06f068..104ae08 100644 --- a/support/make/board-includes/maple_RET6.mk +++ b/support/make/board-includes/maple_RET6.mk @@ -3,3 +3,4 @@ PRODUCT_ID := 0003 ERROR_LED_PORT := GPIOA ERROR_LED_PIN := 5 MCU_SERIES := stm32f1 +MCU_F1_LINE := performance diff --git a/support/make/board-includes/maple_mini.mk b/support/make/board-includes/maple_mini.mk index 835adc3..70ef506 100644 --- a/support/make/board-includes/maple_mini.mk +++ b/support/make/board-includes/maple_mini.mk @@ -3,3 +3,4 @@ PRODUCT_ID := 0003 ERROR_LED_PORT := GPIOB ERROR_LED_PIN := 1 MCU_SERIES := stm32f1 +MCU_F1_LINE := performance diff --git a/support/make/board-includes/maple_native.mk b/support/make/board-includes/maple_native.mk index 3e88e7b..86746a6 100644 --- a/support/make/board-includes/maple_native.mk +++ b/support/make/board-includes/maple_native.mk @@ -3,3 +3,4 @@ PRODUCT_ID := 0003 ERROR_LED_PORT := GPIOC ERROR_LED_PIN := 15 MCU_SERIES := stm32f1 +MCU_F1_LINE := performance diff --git a/support/make/board-includes/olimex_stm32_h103.mk b/support/make/board-includes/olimex_stm32_h103.mk index 96d6976..31f2c04 100644 --- a/support/make/board-includes/olimex_stm32_h103.mk +++ b/support/make/board-includes/olimex_stm32_h103.mk @@ -3,3 +3,4 @@ PRODUCT_ID := 0003 ERROR_LED_PORT := GPIOC ERROR_LED_PIN := 12 MCU_SERIES := stm32f1 +MCU_F1_LINE := performance diff --git a/support/make/target-config.mk b/support/make/target-config.mk index 48a33de..e13504d 100644 --- a/support/make/target-config.mk +++ b/support/make/target-config.mk @@ -15,9 +15,9 @@ TARGET_FLAGS += -DBOARD_$(BOARD) -DMCU_$(MCU) \ LD_SERIES_PATH := $(LDDIR)/stm32/series/$(MCU_SERIES) ifeq ($(MCU_SERIES), stm32f1) - # Hack: force F1 to performance line; this will need to change if - # you add connectivity etc. line support. - LD_SERIES_PATH := $(LD_SERIES_PATH)/performance +# Due to the Balkanization on F1, we need to specify the line when +# making linker decisions. +LD_SERIES_PATH := $(LD_SERIES_PATH)/$(MCU_F1_LINE) endif LIBMAPLE_MODULE_SERIES := $(LIBMAPLE_PATH)/$(MCU_SERIES) diff --git a/wirish/include/wirish/usb_serial.h b/wirish/include/wirish/usb_serial.h index 81e9e97..f36671b 100644 --- a/wirish/include/wirish/usb_serial.h +++ b/wirish/include/wirish/usb_serial.h @@ -25,13 +25,14 @@ *****************************************************************************/ /** - * @brief Wirish virtual serial port + * @brief Wirish USB virtual serial port (SerialUSB). */ #ifndef _WIRISH_USB_SERIAL_H_ #define _WIRISH_USB_SERIAL_H_ #include +#include /** * @brief Virtual serial terminal. @@ -58,7 +59,9 @@ public: uint8 pending(); }; +#if BOARD_HAVE_SERIALUSB extern USBSerial SerialUSB; +#endif #endif diff --git a/wirish/rules.mk b/wirish/rules.mk index 147857a..6d96cbe 100644 --- a/wirish/rules.mk +++ b/wirish/rules.mk @@ -26,6 +26,9 @@ cppSRCS_$(d) += HardwareSerial.cpp cppSRCS_$(d) += HardwareTimer.cpp cppSRCS_$(d) += Print.cpp cppSRCS_$(d) += pwm.cpp +ifeq ($(MCU_SERIES), stm32f1) +cppSRCS_$(d) += usb_serial.cpp # HACK: this is currently STM32F1 only. +endif cppSRCS_$(d) += wirish_analog.cpp cppSRCS_$(d) += wirish_digital.cpp cppSRCS_$(d) += wirish_math.cpp @@ -36,7 +39,6 @@ cppSRCS_$(d) += $(MCU_SERIES)/wirish_digital.cpp cppSRCS_$(d) += $(WIRISH_BOARD_PATH)/board.cpp # TODO: revise these appropriately for F2 and put them back in: # HardwareSPI.cpp -# usb_serial.cpp # ext_interrupts.cpp sFILES_$(d) := $(sSRCS_$(d):%=$(d)/%) diff --git a/wirish/stm32f1/boards_setup.cpp b/wirish/stm32f1/boards_setup.cpp index 423e5ec..1dec579 100644 --- a/wirish/stm32f1/boards_setup.cpp +++ b/wirish/stm32f1/boards_setup.cpp @@ -38,9 +38,9 @@ #include #include -#include -#include +#include +#include // Allow boards to provide a PLL multiplier. This is useful for // e.g. STM32F100 value line MCUs, which use slower multipliers. @@ -80,10 +80,8 @@ namespace wirish { } void board_setup_usb(void) { -#if 0 -# if STM32_HAVE_USB - usb_cdcacm_enable(BOARD_USB_DISC_DEV, BOARD_USB_DISC_BIT); -# endif +#if BOARD_HAVE_SERIALUSB + SerialUSB.begin(); #endif } } diff --git a/wirish/usb_serial.cpp b/wirish/usb_serial.cpp index 388c739..a01900f 100644 --- a/wirish/usb_serial.cpp +++ b/wirish/usb_serial.cpp @@ -40,14 +40,21 @@ #define USB_TIMEOUT 50 USBSerial::USBSerial(void) { +#if !BOARD_HAVE_SERIALUSB + ASSERT(0); +#endif } void USBSerial::begin(void) { +#if BOARD_HAVE_SERIALUSB usb_cdcacm_enable(BOARD_USB_DISC_DEV, BOARD_USB_DISC_BIT); +#endif } void USBSerial::end(void) { +#if BOARD_HAVE_SERIALUSB usb_cdcacm_disable(BOARD_USB_DISC_DEV, BOARD_USB_DISC_BIT); +#endif } void USBSerial::write(uint8 ch) { @@ -117,4 +124,6 @@ uint8 USBSerial::getRTS(void) { return usb_cdcacm_get_rts(); } +#if BOARD_HAVE_SERIALUSB USBSerial SerialUSB; +#endif -- cgit v1.2.3 From 5838b447f675444b154bacd205ebf9f47d003b2f Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Wed, 6 Jun 2012 18:06:48 -0400 Subject: Rework linker scripts. Having separate linker scripts for all the boards is a bad idea. Most boards really only need to specify MEMORY and the appropriate REGION_ALIASES() so that support/ld/common.inc can do its work. Not having infrastructure for this leads to duplication -- viz. the Maple Mini linker scripts are identical to the Maple's, and the olimex_stm32_h103 linker directory is just a symlink to Maple's. Clearly, the current structure is wrong. To fix it, instead of having per-board subdirectories of support/ld/, add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The per-board .mk files under support/mk/board-includes/ now reference these directly, and target-config.mk and the Makefile handle this appropriately. We move some other stuff around in target-config.mk to make this all more convenient, and even allow more overriding of the libmaple defaults on a per-board basis. Custom board hacks will be easier now. Unfortunately, lots of duplication under support/ld/stm32/mem/ is necessary, as the LENGTH attribute in a MEMORY region specification doesn't support arithmetic expressions, and ld doesn't seem to have any way to specify MEMORY at the command line (why?!). If we find a better way than this, we should do it. If a board (e.g. Maple Native) _does_ really need special memory-related configuration, you can always put a per-board subdirectory of support/ld/stm32/mem. We do this here to configure the heap. Signed-off-by: Marti Bolivar --- Makefile | 3 +- support/ld/VLDiscovery/flash.ld | 24 ---------- support/ld/VLDiscovery/jtag.ld | 24 ---------- support/ld/VLDiscovery/ram.ld | 22 ---------- support/ld/flash.ld | 26 +++++++++++ support/ld/jtag.ld | 31 +++++++++++++ support/ld/maple/flash.ld | 24 ---------- support/ld/maple/jtag.ld | 24 ---------- support/ld/maple/ram.ld | 22 ---------- support/ld/maple_RET6/flash.ld | 18 -------- support/ld/maple_RET6/jtag.ld | 18 -------- support/ld/maple_RET6/ram.ld | 17 -------- support/ld/maple_mini/flash.ld | 23 ---------- support/ld/maple_mini/jtag.ld | 24 ---------- support/ld/maple_mini/ram.ld | 22 ---------- support/ld/maple_native/flash.ld | 22 ---------- support/ld/maple_native/jtag.ld | 22 ---------- support/ld/maple_native/ram.ld | 20 --------- support/ld/olimex_stm32_h103 | 1 - support/ld/ram.ld | 25 +++++++++++ support/ld/st_stm3220g_eval/jtag.ld | 17 -------- .../stm32/mem/maple_native/maple_native_heap.inc | 3 ++ support/ld/stm32/mem/maple_native/mem-flash.inc | 7 +++ support/ld/stm32/mem/maple_native/mem-jtag.inc | 7 +++ support/ld/stm32/mem/maple_native/mem-ram.inc | 7 +++ .../stm32/mem/sram_112k_flash_1024k/mem-jtag.inc | 5 +++ .../ld/stm32/mem/sram_112k_flash_1024k/mem-ram.inc | 5 +++ .../ld/stm32/mem/sram_20k_flash_128k/mem-flash.inc | 5 +++ .../ld/stm32/mem/sram_20k_flash_128k/mem-jtag.inc | 5 +++ .../ld/stm32/mem/sram_20k_flash_128k/mem-ram.inc | 5 +++ .../ld/stm32/mem/sram_64k_flash_512k/mem-flash.inc | 5 +++ .../ld/stm32/mem/sram_64k_flash_512k/mem-jtag.inc | 5 +++ .../ld/stm32/mem/sram_64k_flash_512k/mem-ram.inc | 5 +++ .../ld/stm32/mem/sram_8k_flash_128k/mem-flash.inc | 5 +++ .../ld/stm32/mem/sram_8k_flash_128k/mem-jtag.inc | 5 +++ .../ld/stm32/mem/sram_8k_flash_128k/mem-ram.inc | 5 +++ support/make/board-includes/VLDiscovery.mk | 1 + support/make/board-includes/maple.mk | 4 ++ support/make/board-includes/maple_RET6.mk | 1 + support/make/board-includes/maple_mini.mk | 1 + support/make/board-includes/maple_native.mk | 1 + support/make/board-includes/olimex_stm32_h103.mk | 1 + support/make/board-includes/st_stm3220g_eval.mk | 1 + support/make/target-config.mk | 51 ++++++++++++---------- 44 files changed, 199 insertions(+), 370 deletions(-) delete mode 100644 support/ld/VLDiscovery/flash.ld delete mode 100644 support/ld/VLDiscovery/jtag.ld delete mode 100644 support/ld/VLDiscovery/ram.ld create mode 100644 support/ld/flash.ld create mode 100644 support/ld/jtag.ld delete mode 100644 support/ld/maple/flash.ld delete mode 100644 support/ld/maple/jtag.ld delete mode 100644 support/ld/maple/ram.ld delete mode 100644 support/ld/maple_RET6/flash.ld delete mode 100644 support/ld/maple_RET6/jtag.ld delete mode 100644 support/ld/maple_RET6/ram.ld delete mode 100644 support/ld/maple_mini/flash.ld delete mode 100644 support/ld/maple_mini/jtag.ld delete mode 100644 support/ld/maple_mini/ram.ld delete mode 100644 support/ld/maple_native/flash.ld delete mode 100644 support/ld/maple_native/jtag.ld delete mode 100644 support/ld/maple_native/ram.ld delete mode 120000 support/ld/olimex_stm32_h103 create mode 100644 support/ld/ram.ld delete mode 100644 support/ld/st_stm3220g_eval/jtag.ld create mode 100644 support/ld/stm32/mem/maple_native/maple_native_heap.inc create mode 100644 support/ld/stm32/mem/maple_native/mem-flash.inc create mode 100644 support/ld/stm32/mem/maple_native/mem-jtag.inc create mode 100644 support/ld/stm32/mem/maple_native/mem-ram.inc create mode 100644 support/ld/stm32/mem/sram_112k_flash_1024k/mem-jtag.inc create mode 100644 support/ld/stm32/mem/sram_112k_flash_1024k/mem-ram.inc create mode 100644 support/ld/stm32/mem/sram_20k_flash_128k/mem-flash.inc create mode 100644 support/ld/stm32/mem/sram_20k_flash_128k/mem-jtag.inc create mode 100644 support/ld/stm32/mem/sram_20k_flash_128k/mem-ram.inc create mode 100644 support/ld/stm32/mem/sram_64k_flash_512k/mem-flash.inc create mode 100644 support/ld/stm32/mem/sram_64k_flash_512k/mem-jtag.inc create mode 100644 support/ld/stm32/mem/sram_64k_flash_512k/mem-ram.inc create mode 100644 support/ld/stm32/mem/sram_8k_flash_128k/mem-flash.inc create mode 100644 support/ld/stm32/mem/sram_8k_flash_128k/mem-jtag.inc create mode 100644 support/ld/stm32/mem/sram_8k_flash_128k/mem-ram.inc (limited to 'support/ld/stm32') diff --git a/Makefile b/Makefile index 27e0ac8..97d65bb 100644 --- a/Makefile +++ b/Makefile @@ -51,8 +51,7 @@ GLOBAL_CFLAGS := -Os -g3 -gdwarf-2 -mcpu=cortex-m3 -mthumb -march=armv7-m \ GLOBAL_CXXFLAGS := -fno-rtti -fno-exceptions -Wall $(TARGET_FLAGS) GLOBAL_ASFLAGS := -mcpu=cortex-m3 -march=armv7-m -mthumb \ -x assembler-with-cpp $(TARGET_FLAGS) -LDFLAGS = -T$(LDDIR)/$(LDSCRIPT) -L$(LDDIR) \ - -mcpu=cortex-m3 -mthumb -Xlinker -L $(LD_SERIES_PATH) \ +LDFLAGS = $(TARGET_LDFLAGS) -mcpu=cortex-m3 -mthumb -Xlinker \ --gc-sections --print-gc-sections --march=armv7-m -Wall ## diff --git a/support/ld/VLDiscovery/flash.ld b/support/ld/VLDiscovery/flash.ld deleted file mode 100644 index 44ff8a1..0000000 --- a/support/ld/VLDiscovery/flash.ld +++ /dev/null @@ -1,24 +0,0 @@ -/* - * VLDiscovery (STM32F100RBT6, medium density) linker script for Flash builds. - */ - -/* - * Define memory spaces. - */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K - rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -/* - * Define the rest of the sections - */ -_FLASH_BUILD = 1; - -INCLUDE common.inc diff --git a/support/ld/VLDiscovery/jtag.ld b/support/ld/VLDiscovery/jtag.ld deleted file mode 100644 index b952572..0000000 --- a/support/ld/VLDiscovery/jtag.ld +++ /dev/null @@ -1,24 +0,0 @@ -/* - * VLDiscovery (STM32F100RBT6, medium density) linker script for JTAG (bare - * metal, no bootloader) builds. - */ - -/* - * Define memory spaces. - */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K - rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -/* - * Define the rest of the sections - */ -_FLASH_BUILD = 1; -INCLUDE common.inc diff --git a/support/ld/VLDiscovery/ram.ld b/support/ld/VLDiscovery/ram.ld deleted file mode 100644 index d659cd6..0000000 --- a/support/ld/VLDiscovery/ram.ld +++ /dev/null @@ -1,22 +0,0 @@ -/* - * VLDiscovery (STM32F100RBT6, medium density) linker script for RAM builds. - */ - -/* - * Define memory spaces. - */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K - rom (rx) : ORIGIN = 0x08000000, LENGTH = 0K -} - -REGION_ALIAS("REGION_TEXT", ram); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", ram); - -/* - * Define the rest of the sections - */ -INCLUDE common.inc diff --git a/support/ld/flash.ld b/support/ld/flash.ld new file mode 100644 index 0000000..9e250cd --- /dev/null +++ b/support/ld/flash.ld @@ -0,0 +1,26 @@ +/* + * libmaple linker script for "Flash" builds. + * + * A Flash build puts .text (and .rodata) in Flash, and + * .data/.bss/heap (of course) in SRAM, but offsets the sections by + * enough space to store the Maple bootloader, which lives in low + * Flash and uses low memory. + */ + +/* + * This pulls in the appropriate MEMORY declaration from the right + * subdirectory of stm32/mem/ (the environment must call ld with the + * right include directory flags to make this happen). Boards can also + * use this file to use any of libmaple's memory-related hooks (like + * where the heap should live). + */ +INCLUDE mem-flash.inc + +/* Provide memory region aliases for common.inc */ +REGION_ALIAS("REGION_TEXT", rom); +REGION_ALIAS("REGION_DATA", ram); +REGION_ALIAS("REGION_BSS", ram); +REGION_ALIAS("REGION_RODATA", rom); + +/* Let common.inc handle the real work. */ +INCLUDE common.inc diff --git a/support/ld/jtag.ld b/support/ld/jtag.ld new file mode 100644 index 0000000..0612f95 --- /dev/null +++ b/support/ld/jtag.ld @@ -0,0 +1,31 @@ +/* + * libmaple linker script for "JTAG" builds. + * + * A "JTAG" build puts .text (and .rodata) in Flash, and + * .data/.bss/heap (of course) in SRAM, but links starting at the + * Flash and SRAM starting addresses (0x08000000 and 0x20000000 + * respectively). This will wipe out a Maple bootloader if there's one + * on the board, so only use this if you know what you're doing. + * + * Of course, a "JTAG" build is perfectly usable for upload over SWD, + * the system memory bootloader, etc. The name is just a historical + * artifact. + */ + +/* + * This pulls in the appropriate MEMORY declaration from the right + * subdirectory of stm32/mem/ (the environment must call ld with the + * right include directory flags to make this happen). Boards can also + * use this file to use any of libmaple's memory-related hooks (like + * where the heap should live). + */ +INCLUDE mem-jtag.inc + +/* Provide memory region aliases for common.inc */ +REGION_ALIAS("REGION_TEXT", rom); +REGION_ALIAS("REGION_DATA", ram); +REGION_ALIAS("REGION_BSS", ram); +REGION_ALIAS("REGION_RODATA", rom); + +/* Let common.inc handle the real work. */ +INCLUDE common.inc diff --git a/support/ld/maple/flash.ld b/support/ld/maple/flash.ld deleted file mode 100644 index 190c187..0000000 --- a/support/ld/maple/flash.ld +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Maple (STM32F103RBT6, medium density) linker script for Flash builds. - */ - -/* - * Define memory spaces. - */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 17K - rom (rx) : ORIGIN = 0x08005000, LENGTH = 108K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -/* - * Define the rest of the sections - */ -_FLASH_BUILD = 1; - -INCLUDE common.inc diff --git a/support/ld/maple/jtag.ld b/support/ld/maple/jtag.ld deleted file mode 100644 index c090988..0000000 --- a/support/ld/maple/jtag.ld +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Maple (STM32F103RBT6, medium density) linker script for JTAG (bare - * metal, no bootloader) builds. - */ - -/* - * Define memory spaces. - */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K - rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -/* - * Define the rest of the sections - */ -_FLASH_BUILD = 1; -INCLUDE common.inc diff --git a/support/ld/maple/ram.ld b/support/ld/maple/ram.ld deleted file mode 100644 index a5ef621..0000000 --- a/support/ld/maple/ram.ld +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Maple (STM32F103RBT6, medium density) linker script for RAM builds. - */ - -/* - * Define memory spaces. - */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 17K - rom (rx) : ORIGIN = 0x08005000, LENGTH = 0K -} - -REGION_ALIAS("REGION_TEXT", ram); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", ram); - -/* - * Define the rest of the sections - */ -INCLUDE common.inc diff --git a/support/ld/maple_RET6/flash.ld b/support/ld/maple_RET6/flash.ld deleted file mode 100644 index 8b529f8..0000000 --- a/support/ld/maple_RET6/flash.ld +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Maple RET6 Edition (STM32F103RET6, high density) linker script for - * Flash builds. - */ - -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K - rom (rx) : ORIGIN = 0x08005000, LENGTH = 492K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -_FLASH_BUILD = 1; -INCLUDE common.inc diff --git a/support/ld/maple_RET6/jtag.ld b/support/ld/maple_RET6/jtag.ld deleted file mode 100644 index 4ac9d76..0000000 --- a/support/ld/maple_RET6/jtag.ld +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Maple RET6 Edition (STM32F103RET6, high density) linker script for - * JTAG (bare metal, no bootloader) builds. - */ - -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - rom (rx) : ORIGIN = 0x08000000, LENGTH = 512K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -_FLASH_BUILD = 1; -INCLUDE common.inc diff --git a/support/ld/maple_RET6/ram.ld b/support/ld/maple_RET6/ram.ld deleted file mode 100644 index 65c3a2c..0000000 --- a/support/ld/maple_RET6/ram.ld +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Maple RET6 Edition (STM32F103RET6, high density) linker script for - * RAM builds. - */ - -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K - rom (rx) : ORIGIN = 0x08005000, LENGTH = 0K -} - -REGION_ALIAS("REGION_TEXT", ram); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", ram); - -INCLUDE common.inc diff --git a/support/ld/maple_mini/flash.ld b/support/ld/maple_mini/flash.ld deleted file mode 100644 index 52d01dc..0000000 --- a/support/ld/maple_mini/flash.ld +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Maple Mini (STM32F103CBT6, medium density) linker script for Flash builds. - */ - -/* - * Define memory spaces. - */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 17K - rom (rx) : ORIGIN = 0x08005000, LENGTH = 108K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -/* - * Define the rest of the sections - */ -_FLASH_BUILD = 1; -INCLUDE common.inc diff --git a/support/ld/maple_mini/jtag.ld b/support/ld/maple_mini/jtag.ld deleted file mode 100644 index 28e204f..0000000 --- a/support/ld/maple_mini/jtag.ld +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Maple Mini (STM32F103CBT6, medium density) linker script for JTAG - * (bare metal, no bootloader) builds. - */ - -/* - * Define memory spaces. - */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K - rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -/* - * Define the rest of the sections - */ -_FLASH_BUILD = 1; -INCLUDE common.inc diff --git a/support/ld/maple_mini/ram.ld b/support/ld/maple_mini/ram.ld deleted file mode 100644 index 5b0111b..0000000 --- a/support/ld/maple_mini/ram.ld +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Maple Mini (STM32F103CBT6, medium density) linker script for RAM builds. - */ - -/* - * Define memory spaces. - */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 17K - rom (rx) : ORIGIN = 0x08005000, LENGTH = 0K -} - -REGION_ALIAS("REGION_TEXT", ram); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", ram); - -/* - * Define the rest of the sections - */ -INCLUDE common.inc diff --git a/support/ld/maple_native/flash.ld b/support/ld/maple_native/flash.ld deleted file mode 100644 index aac5325..0000000 --- a/support/ld/maple_native/flash.ld +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Maple Native (STM32F103ZET6, high density) linker script for Flash builds. - */ - -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K - rom (rx) : ORIGIN = 0x08005000, LENGTH = 492K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -/* Specify heap boundary addresses on the external SRAM chip */ -_lm_heap_start = 0x60000000; -_lm_heap_end = 0x60100000; - -_FLASH_BUILD = 1; -INCLUDE common.inc - diff --git a/support/ld/maple_native/jtag.ld b/support/ld/maple_native/jtag.ld deleted file mode 100644 index 412348e..0000000 --- a/support/ld/maple_native/jtag.ld +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Maple Native (STM32F103ZET6, high density) linker script for JTAG - * (bare metal, no bootloader) builds. - */ - -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - rom (rx) : ORIGIN = 0x08000000, LENGTH = 512K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -/* Specify heap boundary addresses on the external SRAM chip */ -_lm_heap_start = 0x60000000; -_lm_heap_end = 0x60100000; - -_FLASH_BUILD = 1; -INCLUDE common.inc diff --git a/support/ld/maple_native/ram.ld b/support/ld/maple_native/ram.ld deleted file mode 100644 index eeec761..0000000 --- a/support/ld/maple_native/ram.ld +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Maple Native (STM32F103ZET6, high density) linker script for RAM builds. - */ - -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K - rom (rx) : ORIGIN = 0x08005000, LENGTH = 0K -} - -REGION_ALIAS("REGION_TEXT", ram); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", ram); - -/* Specify heap boundary addresses on the external SRAM chip */ -_lm_heap_start = 0x60000000; -_lm_heap_end = 0x60100000; - -INCLUDE common.inc diff --git a/support/ld/olimex_stm32_h103 b/support/ld/olimex_stm32_h103 deleted file mode 120000 index 2d8bbed..0000000 --- a/support/ld/olimex_stm32_h103 +++ /dev/null @@ -1 +0,0 @@ -maple \ No newline at end of file diff --git a/support/ld/ram.ld b/support/ld/ram.ld new file mode 100644 index 0000000..34b468e --- /dev/null +++ b/support/ld/ram.ld @@ -0,0 +1,25 @@ +/* + * libmaple linker script for RAM builds. + * + * A Flash build puts .text, .rodata, and .data/.bss/heap (of course) + * in SRAM, but offsets the sections by enough space to store the + * Maple bootloader, which uses low memory. + */ + +/* + * This pulls in the appropriate MEMORY declaration from the right + * subdirectory of stm32/mem/ (the environment must call ld with the + * right include directory flags to make this happen). Boards can also + * use this file to use any of libmaple's memory-related hooks (like + * where the heap should live). + */ +INCLUDE mem-ram.inc + +/* Provide memory region aliases for common.inc */ +REGION_ALIAS("REGION_TEXT", ram); +REGION_ALIAS("REGION_DATA", ram); +REGION_ALIAS("REGION_BSS", ram); +REGION_ALIAS("REGION_RODATA", ram); + +/* Let common.inc handle the real work. */ +INCLUDE common.inc diff --git a/support/ld/st_stm3220g_eval/jtag.ld b/support/ld/st_stm3220g_eval/jtag.ld deleted file mode 100644 index 4193f5b..0000000 --- a/support/ld/st_stm3220g_eval/jtag.ld +++ /dev/null @@ -1,17 +0,0 @@ -/* - * STM3220G-EVAL (STM32F207IGH6) linker script for JTAG (bare metal, - * no bootloader) builds. - */ - -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K - rom (rx) : ORIGIN = 0x08000000, LENGTH = 1024K -} - -REGION_ALIAS("REGION_TEXT", rom); -REGION_ALIAS("REGION_DATA", ram); -REGION_ALIAS("REGION_BSS", ram); -REGION_ALIAS("REGION_RODATA", rom); - -INCLUDE common.inc diff --git a/support/ld/stm32/mem/maple_native/maple_native_heap.inc b/support/ld/stm32/mem/maple_native/maple_native_heap.inc new file mode 100644 index 0000000..34b5a2d --- /dev/null +++ b/support/ld/stm32/mem/maple_native/maple_native_heap.inc @@ -0,0 +1,3 @@ +/* Specify heap boundary addresses on the external SRAM chip */ +_lm_heap_start = 0x60000000; +_lm_heap_end = 0x60100000; diff --git a/support/ld/stm32/mem/maple_native/mem-flash.inc b/support/ld/stm32/mem/maple_native/mem-flash.inc new file mode 100644 index 0000000..bae4f39 --- /dev/null +++ b/support/ld/stm32/mem/maple_native/mem-flash.inc @@ -0,0 +1,7 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K + rom (rx) : ORIGIN = 0x08005000, LENGTH = 492K +} + +INCLUDE maple_native_heap.inc diff --git a/support/ld/stm32/mem/maple_native/mem-jtag.inc b/support/ld/stm32/mem/maple_native/mem-jtag.inc new file mode 100644 index 0000000..508ed44 --- /dev/null +++ b/support/ld/stm32/mem/maple_native/mem-jtag.inc @@ -0,0 +1,7 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K + rom (rx) : ORIGIN = 0x08000000, LENGTH = 512K +} + +INCLUDE maple_native_heap.inc diff --git a/support/ld/stm32/mem/maple_native/mem-ram.inc b/support/ld/stm32/mem/maple_native/mem-ram.inc new file mode 100644 index 0000000..6ae11ef --- /dev/null +++ b/support/ld/stm32/mem/maple_native/mem-ram.inc @@ -0,0 +1,7 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K + rom (rx) : ORIGIN = 0x08005000, LENGTH = 0K +} + +INCLUDE maple_native_heap.inc diff --git a/support/ld/stm32/mem/sram_112k_flash_1024k/mem-jtag.inc b/support/ld/stm32/mem/sram_112k_flash_1024k/mem-jtag.inc new file mode 100644 index 0000000..e0d2da1 --- /dev/null +++ b/support/ld/stm32/mem/sram_112k_flash_1024k/mem-jtag.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K + rom (rx) : ORIGIN = 0x08000000, LENGTH = 1024K +} diff --git a/support/ld/stm32/mem/sram_112k_flash_1024k/mem-ram.inc b/support/ld/stm32/mem/sram_112k_flash_1024k/mem-ram.inc new file mode 100644 index 0000000..d21f17c --- /dev/null +++ b/support/ld/stm32/mem/sram_112k_flash_1024k/mem-ram.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K + rom (rx) : ORIGIN = 0x08000000, LENGTH = 0K +} diff --git a/support/ld/stm32/mem/sram_20k_flash_128k/mem-flash.inc b/support/ld/stm32/mem/sram_20k_flash_128k/mem-flash.inc new file mode 100644 index 0000000..a9091ca --- /dev/null +++ b/support/ld/stm32/mem/sram_20k_flash_128k/mem-flash.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 17K + rom (rx) : ORIGIN = 0x08005000, LENGTH = 108K +} diff --git a/support/ld/stm32/mem/sram_20k_flash_128k/mem-jtag.inc b/support/ld/stm32/mem/sram_20k_flash_128k/mem-jtag.inc new file mode 100644 index 0000000..20fbec0 --- /dev/null +++ b/support/ld/stm32/mem/sram_20k_flash_128k/mem-jtag.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K + rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K +} diff --git a/support/ld/stm32/mem/sram_20k_flash_128k/mem-ram.inc b/support/ld/stm32/mem/sram_20k_flash_128k/mem-ram.inc new file mode 100644 index 0000000..f02453b --- /dev/null +++ b/support/ld/stm32/mem/sram_20k_flash_128k/mem-ram.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 17K + rom (rx) : ORIGIN = 0x08005000, LENGTH = 0K +} diff --git a/support/ld/stm32/mem/sram_64k_flash_512k/mem-flash.inc b/support/ld/stm32/mem/sram_64k_flash_512k/mem-flash.inc new file mode 100644 index 0000000..ddb8876 --- /dev/null +++ b/support/ld/stm32/mem/sram_64k_flash_512k/mem-flash.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K + rom (rx) : ORIGIN = 0x08005000, LENGTH = 492K +} diff --git a/support/ld/stm32/mem/sram_64k_flash_512k/mem-jtag.inc b/support/ld/stm32/mem/sram_64k_flash_512k/mem-jtag.inc new file mode 100644 index 0000000..d3ed992 --- /dev/null +++ b/support/ld/stm32/mem/sram_64k_flash_512k/mem-jtag.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K + rom (rx) : ORIGIN = 0x08000000, LENGTH = 512K +} diff --git a/support/ld/stm32/mem/sram_64k_flash_512k/mem-ram.inc b/support/ld/stm32/mem/sram_64k_flash_512k/mem-ram.inc new file mode 100644 index 0000000..360beaf --- /dev/null +++ b/support/ld/stm32/mem/sram_64k_flash_512k/mem-ram.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K + rom (rx) : ORIGIN = 0x08005000, LENGTH = 0K +} diff --git a/support/ld/stm32/mem/sram_8k_flash_128k/mem-flash.inc b/support/ld/stm32/mem/sram_8k_flash_128k/mem-flash.inc new file mode 100644 index 0000000..19372b7 --- /dev/null +++ b/support/ld/stm32/mem/sram_8k_flash_128k/mem-flash.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K + rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K +} diff --git a/support/ld/stm32/mem/sram_8k_flash_128k/mem-jtag.inc b/support/ld/stm32/mem/sram_8k_flash_128k/mem-jtag.inc new file mode 100644 index 0000000..19372b7 --- /dev/null +++ b/support/ld/stm32/mem/sram_8k_flash_128k/mem-jtag.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K + rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K +} diff --git a/support/ld/stm32/mem/sram_8k_flash_128k/mem-ram.inc b/support/ld/stm32/mem/sram_8k_flash_128k/mem-ram.inc new file mode 100644 index 0000000..4063ab4 --- /dev/null +++ b/support/ld/stm32/mem/sram_8k_flash_128k/mem-ram.inc @@ -0,0 +1,5 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K + rom (rx) : ORIGIN = 0x08000000, LENGTH = 0K +} diff --git a/support/make/board-includes/VLDiscovery.mk b/support/make/board-includes/VLDiscovery.mk index 441f078..76cd85a 100644 --- a/support/make/board-includes/VLDiscovery.mk +++ b/support/make/board-includes/VLDiscovery.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOC ERROR_LED_PIN := 9 MCU_SERIES := stm32f1 MCU_F1_LINE := value +LD_MEM_DIR := sram_8k_flash_128k diff --git a/support/make/board-includes/maple.mk b/support/make/board-includes/maple.mk index 4de4bab..a2943ce 100644 --- a/support/make/board-includes/maple.mk +++ b/support/make/board-includes/maple.mk @@ -4,3 +4,7 @@ ERROR_LED_PORT := GPIOA ERROR_LED_PIN := 5 MCU_SERIES := stm32f1 MCU_F1_LINE := performance +# This crap is due to ld-script limitations. If you know of a better +# way to go about this (like some magic ld switches to specify MEMORY +# at the command line), please tell us! +LD_MEM_DIR := sram_20k_flash_128k diff --git a/support/make/board-includes/maple_RET6.mk b/support/make/board-includes/maple_RET6.mk index 104ae08..138722f 100644 --- a/support/make/board-includes/maple_RET6.mk +++ b/support/make/board-includes/maple_RET6.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOA ERROR_LED_PIN := 5 MCU_SERIES := stm32f1 MCU_F1_LINE := performance +LD_MEM_DIR := sram_64k_flash_512k diff --git a/support/make/board-includes/maple_mini.mk b/support/make/board-includes/maple_mini.mk index 70ef506..b022537 100644 --- a/support/make/board-includes/maple_mini.mk +++ b/support/make/board-includes/maple_mini.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOB ERROR_LED_PIN := 1 MCU_SERIES := stm32f1 MCU_F1_LINE := performance +LD_MEM_DIR := sram_20k_flash_128k diff --git a/support/make/board-includes/maple_native.mk b/support/make/board-includes/maple_native.mk index 86746a6..87e58e3 100644 --- a/support/make/board-includes/maple_native.mk +++ b/support/make/board-includes/maple_native.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOC ERROR_LED_PIN := 15 MCU_SERIES := stm32f1 MCU_F1_LINE := performance +LD_MEM_DIR := maple_native # The SRAM chip makes this board special diff --git a/support/make/board-includes/olimex_stm32_h103.mk b/support/make/board-includes/olimex_stm32_h103.mk index 31f2c04..a3304a1 100644 --- a/support/make/board-includes/olimex_stm32_h103.mk +++ b/support/make/board-includes/olimex_stm32_h103.mk @@ -4,3 +4,4 @@ ERROR_LED_PORT := GPIOC ERROR_LED_PIN := 12 MCU_SERIES := stm32f1 MCU_F1_LINE := performance +LD_MEM_DIR := sram_20k_flash_128k diff --git a/support/make/board-includes/st_stm3220g_eval.mk b/support/make/board-includes/st_stm3220g_eval.mk index f8073ea..8aaefc9 100644 --- a/support/make/board-includes/st_stm3220g_eval.mk +++ b/support/make/board-includes/st_stm3220g_eval.mk @@ -2,3 +2,4 @@ MCU := STM32F207IG ERROR_LED_PORT := GPIOG ERROR_LED_PIN := 6 MCU_SERIES := stm32f2 +LD_MEM_DIR := sram_112k_flash_1024k diff --git a/support/make/target-config.mk b/support/make/target-config.mk index a04ca38..ea5dfd9 100644 --- a/support/make/target-config.mk +++ b/support/make/target-config.mk @@ -1,39 +1,42 @@ # TARGET_FLAGS are to be passed while compiling, assembling, linking. - TARGET_FLAGS := +# TARGET_LDFLAGS go to the linker +TARGET_LDFLAGS := -# Board-specific configuration values. Punt these to board-specific -# include files. +# Configuration derived from $(MEMORY_TARGET) -include $(BOARD_INCLUDE_DIR)/$(BOARD).mk +LD_SCRIPT_PATH := $(LDDIR)/$(MEMORY_TARGET).ld -TARGET_FLAGS += -DBOARD_$(BOARD) -DMCU_$(MCU) \ - -DERROR_LED_PORT=$(ERROR_LED_PORT) \ - -DERROR_LED_PIN=$(ERROR_LED_PIN) +ifeq ($(MEMORY_TARGET), ram) +VECT_BASE_ADDR := VECT_TAB_RAM +endif +ifeq ($(MEMORY_TARGET), flash) +VECT_BASE_ADDR := VECT_TAB_FLASH +endif +ifeq ($(MEMORY_TARGET), jtag) +VECT_BASE_ADDR := VECT_TAB_BASE +endif + +# Pull in the board configuration file here, so it can override the +# above. + +include $(BOARD_INCLUDE_DIR)/$(BOARD).mk -# STM32 series-specific configuration values. +# Configuration derived from $(BOARD).mk LD_SERIES_PATH := $(LDDIR)/stm32/series/$(MCU_SERIES) +LD_MEM_PATH := $(LDDIR)/stm32/mem/$(LD_MEM_DIR) ifeq ($(MCU_SERIES), stm32f1) # Due to the Balkanization on F1, we need to specify the line when # making linker decisions. LD_SERIES_PATH := $(LD_SERIES_PATH)/$(MCU_F1_LINE) endif -LIBMAPLE_MODULE_SERIES := $(LIBMAPLE_PATH)/$(MCU_SERIES) - -# Memory target-specific configuration values -ifeq ($(MEMORY_TARGET), ram) - LDSCRIPT := $(BOARD)/ram.ld - VECT_BASE_ADDR := VECT_TAB_RAM -endif -ifeq ($(MEMORY_TARGET), flash) - LDSCRIPT := $(BOARD)/flash.ld - VECT_BASE_ADDR := VECT_TAB_FLASH -endif -ifeq ($(MEMORY_TARGET), jtag) - LDSCRIPT := $(BOARD)/jtag.ld - VECT_BASE_ADDR := VECT_TAB_BASE -endif +TARGET_LDFLAGS += -T$(LD_SCRIPT_PATH) -L $(LD_SERIES_PATH) \ + -L $(LD_MEM_PATH) -L$(LDDIR) +TARGET_FLAGS += -DBOARD_$(BOARD) -DMCU_$(MCU) \ + -DERROR_LED_PORT=$(ERROR_LED_PORT) \ + -DERROR_LED_PIN=$(ERROR_LED_PIN) \ + -D$(VECT_BASE_ADDR) -TARGET_FLAGS += -D$(VECT_BASE_ADDR) +LIBMAPLE_MODULE_SERIES := $(LIBMAPLE_PATH)/$(MCU_SERIES) -- cgit v1.2.3