From a597f3f3ce79c38e0d41acb9591ed7ab2e22bb6a Mon Sep 17 00:00:00 2001
From: iperry <iperry@749a229e-a60e-11de-b98f-4500b42dc123>
Date: Sun, 10 Jan 2010 14:06:15 +0000
Subject: forgot to turn on the interrupt for usar3

git-svn-id: https://leaflabs.googlecode.com/svn/trunk/library@110 749a229e-a60e-11de-b98f-4500b42dc123
---
 src/lib/usart.c |  6 +++---
 src/main.cpp    | 20 +++++++++++++-------
 2 files changed, 16 insertions(+), 10 deletions(-)

(limited to 'src')

diff --git a/src/lib/usart.c b/src/lib/usart.c
index 76685fd..96e920c 100644
--- a/src/lib/usart.c
+++ b/src/lib/usart.c
@@ -86,7 +86,7 @@ void USART2_IRQHandler(void) {
 /* Don't overrun your buffer, seriously  */
 void USART3_IRQHandler(void) {
     /* Read the data  */
-    ring_buf3.buf[ring_buf2.tail++] = (uint8_t)(((usart_port*)(USART3_BASE))->DR);
+    ring_buf3.buf[ring_buf3.tail++] = (uint8_t)(((usart_port*)(USART3_BASE))->DR);
     ring_buf3.tail %= USART_RECV_BUF_SIZE;
 }
 
@@ -124,12 +124,14 @@ void usart_init(uint8 usart_num, uint32 baud) {
         ring_buf = &ring_buf2;
         clk_speed = USART2_CLK;
         RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
+        REG_SET(NVIC_ISER1, BIT(6));
         break;
     case 3:
         port = (usart_port*)USART3_BASE;
         ring_buf = &ring_buf3;
         clk_speed = USART3_CLK;
         RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
+        REG_SET(NVIC_ISER1, BIT(7));
         break;
     default:
         /* should never get here  */
@@ -153,8 +155,6 @@ void usart_init(uint8 usart_num, uint32 baud) {
                 USART_RE          |    // receiver enable
                 USART_RXNEIE;          // receive interrupt enable
 
-    /* Turn it on in the nvic  */
-    REG_SET(NVIC_ISER1, BIT(6));
 
     /* Enable the USART and set mode to 8n1 */
     port->CR1 |= USART_UE;
diff --git a/src/main.cpp b/src/main.cpp
index edd4fbb..78cdf13 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -4,28 +4,34 @@
 #include "HardwareUsb.h"
 #include "usb.h"
 
-//HardwareUsb USB;
+HardwareUsb USB;
 
 int ledPin = 13;
 void setup() {
     pinMode(ledPin,OUTPUT);
-    Serial2.begin(9600);
+//    Serial2.begin(9600);
     Serial3.begin(9600);
+    Serial3.println("hello");
 }
 
 volatile int toggle = 1;
 
+char c;
 void loop() {
     digitalWrite(ledPin, toggle);
     toggle ^= 1;
     delay(500);
 //    USB.print(millis());
+//    Serial3.println("hello");
 //    USB.println("\r");
-    Serial2.print(millis(), DEC);
-    Serial3.print(millis(), DEC);
-    Serial3.print(": ");
-//    Serial3.print(USB.available(), DEC);
-    Serial3.println();
+//    Serial2.print(millis(), DEC);
+//    Serial2.print(": ");
+//    Serial2.print(USB.available(), DEC);
+//    Serial2.println();
+    if (Serial3.available()){
+        c = Serial3.read();
+        Serial3.print(c);
+    }
 }
 
 int main(void) {
-- 
cgit v1.2.3