From a8aaabae4c1cc64a01d740a436336ca31c1f79ba Mon Sep 17 00:00:00 2001 From: iperry Date: Thu, 17 Dec 2009 02:46:08 +0000 Subject: removed extraneous files, stm32lib examples git-svn-id: https://leaflabs.googlecode.com/svn/trunk/library@70 749a229e-a60e-11de-b98f-4500b42dc123 --- .../examples/USART/IrDA/Receive/readme.txt | 85 ---------------------- 1 file changed, 85 deletions(-) delete mode 100755 src/stm32lib/examples/USART/IrDA/Receive/readme.txt (limited to 'src/stm32lib/examples/USART/IrDA/Receive/readme.txt') diff --git a/src/stm32lib/examples/USART/IrDA/Receive/readme.txt b/src/stm32lib/examples/USART/IrDA/Receive/readme.txt deleted file mode 100755 index 21d8a89..0000000 --- a/src/stm32lib/examples/USART/IrDA/Receive/readme.txt +++ /dev/null @@ -1,85 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the USART IrDA Receive Example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example provides a basic communication USART3 IrDA receive mode. Four leds -are used to show which byte is received. - - - LD1 toggle when 0x04 is received - - LD2 toggle when 0x05 is received - - LD3 toggle when 0x03 is received - - LD4 toggle when 0x02 is received - - LD1, LD2, LD3 and LD4 toggle when 0x01 is received - -USART3 configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - -The USART IrDA example provides two IrDA program: transmitter&receiver and requires two boards -to be able to run the full demonstration: - - one board will act as IrDA transmitter - - one board will act as IrDA receiver - - -Directory contents -================== -platform_config.h Evaluation board specific configuration file -stm32f10x_conf.h Library Configuration file -stm32f10x_it.h Interrupt handlers header file -stm32f10x_it.c Interrupt handlers -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation -boards and can be easily tailored to any other hardware. -To select the STMicroelectronics evaluation board used to run the example, uncomment -the corresponding line in platform_config.h file. - - + STM3210B-EVAL - - Use an IrDA tranceiver connected to the USART3 Tx pin (U11 connector, JP5 - jumper must be fitted). - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08 - and PC.09 pins - - + STM3210E-EVAL - - Use an IrDA tranceiver connected to the USART3 Tx pin (U13 connector, JP21 - and JP22 jumper must be fitted). - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08 - and PF.09 pins - - -How to use it -============= -In order to make the program work, you must do the following : -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files : - + stm32f10x_lib.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_usart.c - + stm32f10x_nvic.c - + stm32f10x_flash.c - -- Link all compiled files and load your image into target memory -- Run the example - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** -- cgit v1.2.3