From a8aaabae4c1cc64a01d740a436336ca31c1f79ba Mon Sep 17 00:00:00 2001 From: iperry Date: Thu, 17 Dec 2009 02:46:08 +0000 Subject: removed extraneous files, stm32lib examples git-svn-id: https://leaflabs.googlecode.com/svn/trunk/library@70 749a229e-a60e-11de-b98f-4500b42dc123 --- .../USART/HyperTerminal_HwFlowControl/readme.txt | 88 ---------------------- 1 file changed, 88 deletions(-) delete mode 100755 src/stm32lib/examples/USART/HyperTerminal_HwFlowControl/readme.txt (limited to 'src/stm32lib/examples/USART/HyperTerminal_HwFlowControl/readme.txt') diff --git a/src/stm32lib/examples/USART/HyperTerminal_HwFlowControl/readme.txt b/src/stm32lib/examples/USART/HyperTerminal_HwFlowControl/readme.txt deleted file mode 100755 index 3e1d79b..0000000 --- a/src/stm32lib/examples/USART/HyperTerminal_HwFlowControl/readme.txt +++ /dev/null @@ -1,88 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the USART Hyperterminal Hardware Flow Control -* Example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example provides a description of how to use the USART with hardware flow -control and communicate with the Hyperterminal. -First, the USART2 sends the TxBuffer to the hyperterminal and still waiting for -a string from the hyperterminal that you must enter which must end by '\r' -character (keypad ENTER button). The communication will end if received data exceed -255 without sending the '\r' character. Each byte received is retransmitted to the -Hyperterminal. -The string that you have entered is stored in the RxBuffer array. The receive -buffer have a RxBufferSize bytes as maximum. - -The USART2 is configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control enabled (RTS and CTS signals) - - Receive and transmit enabled - - -Directory contents -================== -platform_config.h Evaluation board specific configuration file -stm32f10x_conf.h Library Configuration file -stm32f10x_it.h Interrupt handlers header file -stm32f10x_it.c Interrupt handlers -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation -boards and can be easily tailored to any other hardware. -To select the STMicroelectronics evaluation board used to run the example, uncomment -the corresponding line in platform_config.h file. - - + STM3210B-EVAL - - Connect a null-modem female/female RS232 cable between CN5 and PC serial - port. - - Note: in this case USART2 Tx, Rx, RTS and CTS pins are remapped by software - on PD.05, PD.06, PD.04 and PD.03 respectively. - - + STM3210E-EVAL - - Connect a null-modem female/female RS232 cable between CN8 and PC serial - port. - - Make sure the Jumper 4 (JP4) is in position 2<-->3. - - + Hyperterminal configuration: - - Word Length = 8 Bits - - One Stop Bit - - No parity - - BaudRate = 115200 baud - - flow control: Hardware - - -How to use it -============= -In order to make the program work, you must do the following : -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files : - + stm32f10x_lib.c - + stm32f10x_usart.c - + stm32f10x_gpio.c - + stm32f10x_nvic.c - + stm32f10x_rcc.c - + stm32f10x_flash.c - -- Link all compiled files and load your image into target memory -- Run the example - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** -- cgit v1.2.3