From a8aaabae4c1cc64a01d740a436336ca31c1f79ba Mon Sep 17 00:00:00 2001 From: iperry Date: Thu, 17 Dec 2009 02:46:08 +0000 Subject: removed extraneous files, stm32lib examples git-svn-id: https://leaflabs.googlecode.com/svn/trunk/library@70 749a229e-a60e-11de-b98f-4500b42dc123 --- src/stm32lib/examples/NVIC/CM3_LPModes/main.c | 344 --------- .../examples/NVIC/CM3_LPModes/platform_config.h | 56 -- src/stm32lib/examples/NVIC/CM3_LPModes/readme.txt | 137 ---- .../examples/NVIC/CM3_LPModes/stm32f10x_conf.h | 170 ----- .../examples/NVIC/CM3_LPModes/stm32f10x_it.c | 825 -------------------- .../examples/NVIC/CM3_LPModes/stm32f10x_it.h | 100 --- src/stm32lib/examples/NVIC/DMA_WFIMode/main.c | 352 --------- .../examples/NVIC/DMA_WFIMode/platform_config.h | 56 -- src/stm32lib/examples/NVIC/DMA_WFIMode/readme.txt | 103 --- .../examples/NVIC/DMA_WFIMode/stm32f10x_conf.h | 169 ----- .../examples/NVIC/DMA_WFIMode/stm32f10x_it.c | 843 -------------------- .../examples/NVIC/DMA_WFIMode/stm32f10x_it.h | 100 --- src/stm32lib/examples/NVIC/IRQ_Channels/main.c | 261 ------- .../examples/NVIC/IRQ_Channels/platform_config.h | 44 -- src/stm32lib/examples/NVIC/IRQ_Channels/readme.txt | 69 -- .../examples/NVIC/IRQ_Channels/stm32f10x_conf.h | 170 ----- .../examples/NVIC/IRQ_Channels/stm32f10x_it.c | 826 -------------------- .../examples/NVIC/IRQ_Channels/stm32f10x_it.h | 100 --- src/stm32lib/examples/NVIC/Priority/main.c | 252 ------ .../examples/NVIC/Priority/platform_config.h | 56 -- src/stm32lib/examples/NVIC/Priority/readme.txt | 97 --- .../examples/NVIC/Priority/stm32f10x_conf.h | 170 ----- src/stm32lib/examples/NVIC/Priority/stm32f10x_it.c | 844 --------------------- src/stm32lib/examples/NVIC/Priority/stm32f10x_it.h | 100 --- src/stm32lib/examples/NVIC/System_Handlers/main.c | 193 ----- .../NVIC/System_Handlers/platform_config.h | 44 -- .../examples/NVIC/System_Handlers/readme.txt | 80 -- .../examples/NVIC/System_Handlers/stm32f10x_conf.h | 170 ----- .../examples/NVIC/System_Handlers/stm32f10x_it.c | 826 -------------------- .../examples/NVIC/System_Handlers/stm32f10x_it.h | 100 --- .../linker/EWARMv4/lnkarm_flash_offset.xcl | 191 ----- .../linker/EWARMv5/stm32f10x_flash_offset.icf | 31 - .../linker/HiTOP/STM32F10x_offset.lsl | 132 ---- .../linker/HiTOP/link_offset.lnk | 5 - .../linker/RIDE/stm32f10x_flash_offset.ld | 250 ------ .../examples/NVIC/VectorTable_Relocation/main.c | 216 ------ .../examples/NVIC/VectorTable_Relocation/main.h | 32 - .../NVIC/VectorTable_Relocation/platform_config.h | 44 -- .../NVIC/VectorTable_Relocation/readme.txt | 131 ---- .../NVIC/VectorTable_Relocation/stm32f10x_conf.h | 170 ----- .../NVIC/VectorTable_Relocation/stm32f10x_it.c | 812 -------------------- .../NVIC/VectorTable_Relocation/stm32f10x_it.h | 100 --- 42 files changed, 9771 deletions(-) delete mode 100755 src/stm32lib/examples/NVIC/CM3_LPModes/main.c delete mode 100755 src/stm32lib/examples/NVIC/CM3_LPModes/platform_config.h delete mode 100755 src/stm32lib/examples/NVIC/CM3_LPModes/readme.txt delete mode 100755 src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_it.h delete mode 100755 src/stm32lib/examples/NVIC/DMA_WFIMode/main.c delete mode 100755 src/stm32lib/examples/NVIC/DMA_WFIMode/platform_config.h delete mode 100755 src/stm32lib/examples/NVIC/DMA_WFIMode/readme.txt delete mode 100755 src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_it.h delete mode 100755 src/stm32lib/examples/NVIC/IRQ_Channels/main.c delete mode 100755 src/stm32lib/examples/NVIC/IRQ_Channels/platform_config.h delete mode 100755 src/stm32lib/examples/NVIC/IRQ_Channels/readme.txt delete mode 100755 src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_it.h delete mode 100755 src/stm32lib/examples/NVIC/Priority/main.c delete mode 100755 src/stm32lib/examples/NVIC/Priority/platform_config.h delete mode 100755 src/stm32lib/examples/NVIC/Priority/readme.txt delete mode 100755 src/stm32lib/examples/NVIC/Priority/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/NVIC/Priority/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/NVIC/Priority/stm32f10x_it.h delete mode 100755 src/stm32lib/examples/NVIC/System_Handlers/main.c delete mode 100755 src/stm32lib/examples/NVIC/System_Handlers/platform_config.h delete mode 100755 src/stm32lib/examples/NVIC/System_Handlers/readme.txt delete mode 100755 src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_it.h delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/EWARMv4/lnkarm_flash_offset.xcl delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/EWARMv5/stm32f10x_flash_offset.icf delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32F10x_offset.lsl delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/HiTOP/link_offset.lnk delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/RIDE/stm32f10x_flash_offset.ld delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/main.c delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/main.h delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/platform_config.h delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/readme.txt delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_it.h (limited to 'src/stm32lib/examples/NVIC') diff --git a/src/stm32lib/examples/NVIC/CM3_LPModes/main.c b/src/stm32lib/examples/NVIC/CM3_LPModes/main.c deleted file mode 100755 index ce11bb1..0000000 --- a/src/stm32lib/examples/NVIC/CM3_LPModes/main.c +++ /dev/null @@ -1,344 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -//#define WFISLEEPONEXIT -#define WFISLEEPNOW -//#define WFESEVONPEND -//#define WFESEVONEVENT -//#define RTC_Alarm_WFEWakeUp - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -EXTI_InitTypeDef EXTI_InitStructure; -GPIO_InitTypeDef GPIO_InitStructure; -NVIC_InitTypeDef NVIC_InitStructure; -vu32 LowPowerMode = 0; -ErrorStatus HSEStartUpStatus; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); -void EXTI_Configuration(void); -void Delay(vu32 nCount); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* Configure the system clocks */ - RCC_Configuration(); - - /* Configure GPIOs */ - GPIO_Configuration(); - - /* Configures the EXTI Lines */ - EXTI_Configuration(); - -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif - - NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1); - - NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - NVIC_Init(&NVIC_InitStructure); - - while (1) - { - if(LowPowerMode == 1) - { - LowPowerMode = 0; - - /* Toggle GPIO_LED pin 6 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_6, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_6))); - - #ifdef WFISLEEPONEXIT - NVIC_SystemLPConfig(NVIC_LP_SLEEPONEXIT, ENABLE); - #endif - - #ifdef WFISLEEPNOW - NVIC_SystemLPConfig(NVIC_LP_SLEEPONEXIT, DISABLE); - __WFI(); - #endif - - #ifdef WFESEVONPEND - NVIC_SystemLPConfig(NVIC_LP_SEVONPEND, ENABLE); - /* Boost the execution priority to 0: no further exception can be asserted */ - NVIC_SETPRIMASK(); - #ifdef RTC_Alarm_WFEWakeUp - /* Set the RTC Alarm interrupt after 6s */ - RTC_SetAlarm(0xFFFFFFFA); - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - /* Set the Counter to 0xFFFFFFF5 */ - RTC_SetCounter(0xFFFFFFF5); - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - #endif - __WFE(); - #endif - - #ifdef WFESEVONEVENT - NVIC_SystemLPConfig(NVIC_LP_SEVONPEND, DISABLE); - #ifdef RTC_Alarm_WFEWakeUp - /* Set the RTC Alarm interrupt after 6s */ - RTC_SetAlarm(0xFFFFFFFA); - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - /* Set the Counter to 0xFFFFFFF5 */ - RTC_SetCounter(0xFFFFFFF5); - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - #endif - __WFE(); - #endif - } - - Delay(0xFFFFF); - - /* Toggle GPIO_LED pin 9 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_9, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_9))); - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - - /* GPIOA, GPIOC, GPIO KEY Button, GPIO_LED and AFIO clocks enable */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIO_KEY_BUTTON | - RCC_APB2Periph_GPIO_LED | RCC_APB2Periph_GPIOC | - RCC_APB2Periph_AFIO, ENABLE); - -#ifdef RTC_Alarm_WFEWakeUp - /* Enable the PWR and BKP Clocks */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE); - - /* Configure the EXTI Line 17 as Event */ - EXTI_StructInit(&EXTI_InitStructure); - EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Event; - EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStructure.EXTI_Line = EXTI_Line17; - EXTI_InitStructure.EXTI_LineCmd = ENABLE; - EXTI_Init(&EXTI_InitStructure); - - /* Allow access to BKP Domain */ - PWR_BackupAccessCmd(ENABLE); - - /* Reset Backup Domain */ - BKP_DeInit(); - /* Enable LSE */ - RCC_LSEConfig(RCC_LSE_ON); - /* Wait till LSE is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) - { - } - - /* Select LSE as RTC Clock Source */ - RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE); - - /* Enable the RTC Clock */ - RCC_RTCCLKCmd(ENABLE); - /* Wait for APB registers synchronisation */ - RTC_WaitForSynchro(); - - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - /* Set the RTC time base to 1s */ - RTC_SetPrescaler(32767); - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); -#endif - -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the used GPIO pins. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Configuration(void) -{ - GPIO_StructInit(&GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_8 | GPIO_Pin_9; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIO_LED, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIOA, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_PIN_KEY_BUTTON; - GPIO_Init(GPIO_KEY_BUTTON, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13; - GPIO_Init(GPIOC, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : EXTI_Configuration -* Description : Configures the used EXTI lines. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_Configuration(void) -{ - /* Connect EXTI Line0 to PA.00 */ - GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource0); - - /* Configure EXTI Line0 to generate an interrupt on falling edge */ - EXTI_InitStructure.EXTI_Line = EXTI_Line0; - EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStructure.EXTI_LineCmd = ENABLE; - EXTI_Init(&EXTI_InitStructure); - - - /* Connect EXTI Line13 to PC.13 */ - GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource13); - - /* Configure EXTI Line13 to generate an event on falling edge */ - EXTI_InitStructure.EXTI_Line = EXTI_Line13; - EXTI_Init(&EXTI_InitStructure); - - - /* Connect Key Button EXTI Line to GPIO Key Button Pin */ - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KEY_BUTTON, GPIO_PIN_SOURCE_KEY_BUTTON); - - /* Configure Key Button EXTI Line to generate an event on falling edge */ - EXTI_InitStructure.EXTI_Line = EXTI_LINE_KEY_BUTTON; - EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Event; - EXTI_Init(&EXTI_InitStructure); -} - -/******************************************************************************* -* Function Name : Delay -* Description : Inserts a delay time. -* Input : nCount: specifies the delay time length. -* Output : None -* Return : None -*******************************************************************************/ -void Delay(vu32 nCount) -{ - for(; nCount != 0; nCount--); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/CM3_LPModes/platform_config.h b/src/stm32lib/examples/NVIC/CM3_LPModes/platform_config.h deleted file mode 100755 index 3deb7ba..0000000 --- a/src/stm32lib/examples/NVIC/CM3_LPModes/platform_config.h +++ /dev/null @@ -1,56 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : platform_config.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Evaluation board specific configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) - //#define USE_STM3210B_EVAL - #define USE_STM3210E_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#ifdef USE_STM3210B_EVAL - #define GPIO_LED GPIOC - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOC - #define GPIO_KEY_BUTTON GPIOB - #define RCC_APB2Periph_GPIO_KEY_BUTTON RCC_APB2Periph_GPIOB - #define GPIO_PIN_KEY_BUTTON GPIO_Pin_9 - #define EXTI_LINE_KEY_BUTTON EXTI_Line9 - #define GPIO_PORT_SOURCE_KEY_BUTTON GPIO_PortSourceGPIOB - #define GPIO_PIN_SOURCE_KEY_BUTTON GPIO_PinSource9 -#elif defined USE_STM3210E_EVAL - #define GPIO_LED GPIOF - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOF - #define GPIO_KEY_BUTTON GPIOG - #define RCC_APB2Periph_GPIO_KEY_BUTTON RCC_APB2Periph_GPIOG - #define GPIO_PIN_KEY_BUTTON GPIO_Pin_8 - #define EXTI_LINE_KEY_BUTTON EXTI_Line8 - #define GPIO_PORT_SOURCE_KEY_BUTTON GPIO_PortSourceGPIOG - #define GPIO_PIN_SOURCE_KEY_BUTTON GPIO_PinSource8 -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/CM3_LPModes/readme.txt b/src/stm32lib/examples/NVIC/CM3_LPModes/readme.txt deleted file mode 100755 index 94d2ef3..0000000 --- a/src/stm32lib/examples/NVIC/CM3_LPModes/readme.txt +++ /dev/null @@ -1,137 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the NVIC CM3 Low Power Example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example describes how to use the NVIC firmware library to demonstrate the -Cortex-M3 low power modes capabilities (WFE and WFI). - -This example uses three EXTI lines(Wakeup button EXTI Line, Key button EXTI Line -& Tamper button EXTI Line)to generate interrupts and event on each falling edge. -The Wakeup button EXTI Line and Tamper button EXTI Line are configured in -interrupt mode and the Key button EXTI Line in event mode. The user has to select -which low power mode would execute through a five define in the main code. - -These choices are: - - - Wait For Interrupt (WFI) Sleep On Exit: in this mode the WFI instruction is - excecuted automatically on an exception Return. The exception will be executed - if has enough priority to run and the core will return in the WFI mode. - To run this behaviour proceed as following: - - * Choose the #WFISLEEPONEXIT define and comment others defines - * run the example - * The Wakeup button EXTI Line toggles LD4. - * Push the Tamper button, the SLEEPONEXIT function is selected - Any edge on the Wakeup button EXTI Line or Tamper button EXTI Line will - execute the EXTI interrupt, when exit from the ISR the core will enter WFI - mode. Any time you push the Wakeup button the core exit from WFI mode, - LD4 is toggled then the core enters again in WFI mode. - This behavior is repeated in an infinite loop. - - - Wait For Interrupt (WFI) Sleep Now: in this mode the WFI instruction is - excecuted directly. To run this behaviour proceed as following: - - * Choose the #WFISLEEPNOW define and comment others defines - * run the example - * The Tamper button EXTI Line will toggle LD1 and put the core in the WFI mode. - * To wakeup the Core use the Wakeup button that will toggle the LD3. - This behavior is repeated in an infinite loop. - - - Wait For Event (WFE) SEV ON PEND: in this mode the WFE instruction is excecuted - directly and the main instruction stream (execution priority) is boosted by the - register PRIMASK (main priority = 0). - To run this behaviour proceed as following: - - * Choose the #WFESEVONPEND define and comment others defines - * run the example - * The Tamper button EXTI Line will boost the execution priority to 0 (no - interrupt will be executed after due to the priority boosting), toggle - LD1 and put the core in WFE mode. - * To wakeUp the Core use the Wakeup button that will not toggle the LD3 but - will only wakeup the core from the WFE (SEV ON PEND). - This EXTI Line interrupt has passed from unpended state to a pended state - which wakeup the core from the WFE. - * To wakeup the core also you can use theTamper button configured in event - mode. - * if the #RTC_Alarm_WFEWakeUp define is enabled, the RTC alarm will wakeUp - the Core after 6 seconds (if none of Tamper button EXTI Line and Key - button EXTI Line was used before this delay to wakeUp the Core) - - - Wait For Event (WFE) SEV ON EVENT: in this mode the WFE instruction is - excecuted directly. To run this behaviour proceed as following: - - * Choose the #WFESEVONEVENT define and comment others defines - * run the example - * The Tamper button EXTI Line will toggle LD1 and put the core in the WFE mode. - * To wakeup the Core use the Wakeup button that will toggle the LD3. - * To wakeup the core also you can use the Key button configured in event mode. - * if the #RTC_Alarm_WFEWakeUp define is enabled, the RTC alarm will wakeUp - the Core after 6 seconds (if none of Tamper button EXTI Line and Key button - EXTI Line was used before this delay to wakeup the Core) - This behavior is repeated in an infinite loop. - -LD4 is toggled to indicate whether the MCU is in RUN or in low power mode. - -Directory contents -================== -platform_config.h Evaluation board specific configuration file -stm32f10x_conf.h Library Configuration file -stm32f10x_it.c Interrupt handlers -stm32f10x_it.h Interrupt handlers header file -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation -boards and can be easily tailored to any other hardware. -To select the STMicroelectronics evaluation board used to run the example, uncomment -the corresponding line in platform_config.h file. - - + STM3210B-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08 - and PC.09 pins - - Use the Key push-button connected to pin PB.09 (EXTI Line9). - - Use the Wakeup push-button connected to pin PA.00 (EXTI Line0). - - Use the Tamper push-button connected to pin PC.13 (EXTI Line13). - - + STM3210E-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08 - and PF.09 pins - - Use the Key push-button connected to pin PG.08 (EXTI Line8). - - Use the Wakeup push-button connected to pin PA.00 (EXTI Line0). - - Use the Tamper push-button connected to pin PC.13 (EXTI Line13). - -How to use it -============= -In order to make the program work, you must do the following : -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files : - + stm32f10x_lib.c - + stm32f10x_exti.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_rtc.c - + stm32f10x_pwr.c - + stm32f10x_bkp.c - + stm32f10x_flash.c - -- Link all compiled files and load your image into target memory -- Run the example - - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_conf.h b/src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_conf.h deleted file mode 100755 index a04dca1..0000000 --- a/src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_conf.h +++ /dev/null @@ -1,170 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -//#define _ADC -//#define _ADC1 -//#define _ADC2 -//#define _ADC3 - -/************************************* BKP ************************************/ -#define _BKP - -/************************************* CAN ************************************/ -//#define _CAN - -/************************************* CRC ************************************/ -//#define _CRC - -/************************************* DAC ************************************/ -//#define _DAC - -/************************************* DBGMCU *********************************/ -//#define _DBGMCU - -/************************************* DMA ************************************/ -//#define _DMA -//#define _DMA1_Channel1 -//#define _DMA1_Channel2 -//#define _DMA1_Channel3 -//#define _DMA1_Channel4 -//#define _DMA1_Channel5 -//#define _DMA1_Channel6 -//#define _DMA1_Channel7 -//#define _DMA2_Channel1 -//#define _DMA2_Channel2 -//#define _DMA2_Channel3 -//#define _DMA2_Channel4 -//#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -//#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -#define _GPIOA -#define _GPIOB -#define _GPIOC -//#define _GPIOD -//#define _GPIOE -#define _GPIOF -#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -//#define _I2C -//#define _I2C1 -//#define _I2C2 - -/************************************* IWDG ***********************************/ -//#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -#define _RTC - -/************************************* SDIO ***********************************/ -//#define _SDIO - -/************************************* SPI ************************************/ -//#define _SPI -//#define _SPI1 -//#define _SPI2 -//#define _SPI3 - -/************************************* SysTick ********************************/ -//#define _SysTick - -/************************************* TIM ************************************/ -//#define _TIM -//#define _TIM1 -//#define _TIM2 -//#define _TIM3 -//#define _TIM4 -//#define _TIM5 -//#define _TIM6 -//#define _TIM7 -//#define _TIM8 - -/************************************* USART **********************************/ -//#define _USART -//#define _USART1 -//#define _USART2 -//#define _USART3 -//#define _UART4 -//#define _UART5 - -/************************************* WWDG ***********************************/ -//#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_it.c b/src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_it.c deleted file mode 100755 index 4413799..0000000 --- a/src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_it.c +++ /dev/null @@ -1,825 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -extern vu32 LowPowerMode; - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ - /* Clear EXTI line0 pending bit */ - EXTI_ClearITPendingBit(EXTI_Line0); - - /* Toggle GPIO_LED pin 8 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_8, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_8))); -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ - if(EXTI_GetITStatus(EXTI_Line13) != RESET) - { - /* Clear EXTI line13 pending bit */ - EXTI_ClearITPendingBit(EXTI_Line13); - - LowPowerMode = 1; - } -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_it.h b/src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/NVIC/CM3_LPModes/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/DMA_WFIMode/main.c b/src/stm32lib/examples/NVIC/DMA_WFIMode/main.c deleted file mode 100755 index 130c0a8..0000000 --- a/src/stm32lib/examples/NVIC/DMA_WFIMode/main.c +++ /dev/null @@ -1,352 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define USART1_DR_Address 0x40013804 - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -NVIC_InitTypeDef NVIC_InitStructure; -DMA_InitTypeDef DMA_InitStructure; - -vu32 LowPowerMode = 0; -u16 DST_Buffer[10]= {0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; -ErrorStatus HSEStartUpStatus; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); -void EXTI_Configuration(void); -void DMA_Configuration(void); -void USART_Configuration(void); -u8 Buffercmp16(u16* pBuffer1, u16* pBuffer2, u16 BufferLength); -void Delay(vu32 nCount); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* Configure the system clocks */ - RCC_Configuration(); - - /* Configure GPIOs */ - GPIO_Configuration(); - - /* Configures the EXTI Lines */ - EXTI_Configuration(); - - /* Configures the DMA Channel */ - DMA_Configuration(); - - /* Configures the USART1 */ - USART_Configuration(); - -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif - - NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1); - - /* Enable the DMA1 Channel 5 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel5_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - /* Enable the EXTI9_5 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - NVIC_Init(&NVIC_InitStructure); - - while (1) - { - if(LowPowerMode == 1) - { - - GPIO_ResetBits(GPIO_LED, GPIO_Pin_7 | GPIO_Pin_8); - - /* Request to enter WFI mode */ - __WFI(); - LowPowerMode = 0; - } - - Delay(0xFFFFF); - GPIO_WriteBit(GPIO_LED, GPIO_Pin_6, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_6))); - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - - /* Enable USART1, GPIOA, GPIO_LED, GPIO_KEY_BUTTON and AFIO clocks */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA | - RCC_APB2Periph_GPIO_LED | RCC_APB2Periph_GPIO_KEY_BUTTON | - RCC_APB2Periph_AFIO, ENABLE); - - /* DMA1 clock enable */ - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the used GPIO pins. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Configure GPIO_LED Pin 6, GPIO_LED Pin 7 and GPIO_LED Pin 8 as - Output push-pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 |GPIO_Pin_7 | GPIO_Pin_8; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIO_LED, &GPIO_InitStructure); - - /* Configure USART1 Rx (PA.10) as input floating */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIOA, &GPIO_InitStructure); - - /* Configure GPIO KEY Button Pin as input floating */ - GPIO_InitStructure.GPIO_Pin = GPIO_PIN_KEY_BUTTON; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIO_KEY_BUTTON, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : EXTI_Configuration -* Description : Configures the used EXTI line. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_Configuration(void) -{ - EXTI_InitTypeDef EXTI_InitStructure; - - /* Connect KEY Button EXTI Line to GPIO KEY Button Pin */ - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KEY_BUTTON, GPIO_PIN_SOURCE_KEY_BUTTON); - - /* Configure KEY Button EXTI Line to generate an interrupt on falling edge */ - EXTI_InitStructure.EXTI_Line = EXTI_LINE_KEY_BUTTON; - EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStructure.EXTI_LineCmd = ENABLE; - EXTI_Init(&EXTI_InitStructure); -} - -/******************************************************************************* -* Function Name : DMA_Configuration -* Description : Configures the used DMA Channel. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA_Configuration(void) -{ - DMA_InitTypeDef DMA_InitStructure; - - /* DMA1 Channel5 Config */ - DMA_DeInit(DMA1_Channel5); - DMA_InitStructure.DMA_PeripheralBaseAddr = USART1_DR_Address; - DMA_InitStructure.DMA_MemoryBaseAddr = (u32)DST_Buffer; - DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC; - DMA_InitStructure.DMA_BufferSize = 10; - DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; - DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; - DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord; - DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord; - DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; - DMA_InitStructure.DMA_Priority = DMA_Priority_High; - DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; - DMA_Init(DMA1_Channel5, &DMA_InitStructure); - - /* Enable Channel5 Transfer complete interrupt */ - DMA_ITConfig(DMA1_Channel5, DMA_IT_TC, ENABLE); - - /* DMA1 Channel5 enable */ - DMA_Cmd(DMA1_Channel5, ENABLE); -} - -/******************************************************************************* -* Function Name : USART_Configuration -* Description : Configures the USART1. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART_Configuration(void) -{ - USART_InitTypeDef USART_InitStructure; - -/* USART1 configuration ------------------------------------------------------*/ - /* USART1 configured as follow: - - BaudRate = 9600 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - */ - USART_InitStructure.USART_BaudRate = 9600; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - - USART_Init(USART1, &USART_InitStructure); - - USART_DMACmd(USART1, USART_DMAReq_Rx, ENABLE); - - /* Enable the USART1 */ - USART_Cmd(USART1, ENABLE); -} - -/******************************************************************************* -* Function Name : Buffercmp16 -* Description : Compares two buffers. -* Input : - pBuffer1, pBuffer2: buffers to be compared. -* : - BufferLength: buffer's length -* Output : None -* Return : 0: pBuffer1 identical to pBuffer2 -* 1: pBuffer1 differs from pBuffer2 -*******************************************************************************/ -u8 Buffercmp16(u16* pBuffer1, u16* pBuffer2, u16 BufferLength) -{ - while(BufferLength--) - { - if(*pBuffer1 != *pBuffer2) - { - return 1; - } - - pBuffer1++; - pBuffer2++; - } - return 0; -} - -/******************************************************************************* -* Function Name : Delay -* Description : Inserts a delay time. -* Input : nCount: specifies the delay time length. -* Output : None -* Return : None -*******************************************************************************/ -void Delay(vu32 nCount) -{ - for(; nCount != 0; nCount--); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/DMA_WFIMode/platform_config.h b/src/stm32lib/examples/NVIC/DMA_WFIMode/platform_config.h deleted file mode 100755 index 3deb7ba..0000000 --- a/src/stm32lib/examples/NVIC/DMA_WFIMode/platform_config.h +++ /dev/null @@ -1,56 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : platform_config.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Evaluation board specific configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) - //#define USE_STM3210B_EVAL - #define USE_STM3210E_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#ifdef USE_STM3210B_EVAL - #define GPIO_LED GPIOC - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOC - #define GPIO_KEY_BUTTON GPIOB - #define RCC_APB2Periph_GPIO_KEY_BUTTON RCC_APB2Periph_GPIOB - #define GPIO_PIN_KEY_BUTTON GPIO_Pin_9 - #define EXTI_LINE_KEY_BUTTON EXTI_Line9 - #define GPIO_PORT_SOURCE_KEY_BUTTON GPIO_PortSourceGPIOB - #define GPIO_PIN_SOURCE_KEY_BUTTON GPIO_PinSource9 -#elif defined USE_STM3210E_EVAL - #define GPIO_LED GPIOF - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOF - #define GPIO_KEY_BUTTON GPIOG - #define RCC_APB2Periph_GPIO_KEY_BUTTON RCC_APB2Periph_GPIOG - #define GPIO_PIN_KEY_BUTTON GPIO_Pin_8 - #define EXTI_LINE_KEY_BUTTON EXTI_Line8 - #define GPIO_PORT_SOURCE_KEY_BUTTON GPIO_PortSourceGPIOG - #define GPIO_PIN_SOURCE_KEY_BUTTON GPIO_PinSource8 -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/DMA_WFIMode/readme.txt b/src/stm32lib/examples/NVIC/DMA_WFIMode/readme.txt deleted file mode 100755 index ee99fcd..0000000 --- a/src/stm32lib/examples/NVIC/DMA_WFIMode/readme.txt +++ /dev/null @@ -1,103 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the NVIC DMA in WFI mode Example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example shows how to enters the system to WFI mode with DMA transfer enabled -and wake-up from this mode by the DMA End of Transfer interrupt. - -In the associated software, the system clock is set to 72 MHz, the DMA1 Channel5 -is configured to transfer 10 data from the USART1 data register to a predefined -buffer, DST_Buffer, and to generate an interrupt at the end of the transfer. -The USART1 receives data from Hyperterminal. -A LED1 is toggled with a frequency depending on the system -clock, this is used to indicate whether the MCU is in WFI or RUN mode. - -A falling edge on the selected EXTI Line will put the core in the WFI mode, causing the -led pin to stop toggling. -To wake-up from WFI mode you have to send the sequence (0, 1, 2, 3, 4, 5, 6, 7, 8, 9) -from the Hyperterminal to the USART1. These bytes will be transferred by the DMA from -the USART1 receive data register to the predefined buffer, then generates an interrupt -which exits the system from WFI mode. -The LED1 restarts toggling and a LED2 will toggle if the buffer is correctly received -else a LED3 is toggled. - - -Directory contents -================== -platform_config.h Evaluation board specific configuration file -stm32f10x_conf.h Library Configuration file -stm32f10x_it.c Interrupt handlers -stm32f10x_it.h Interrupt handlers header file -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation -boards and can be easily tailored to any other hardware. -To select the STMicroelectronics evaluation board used to run the example, uncomment -the corresponding line in platform_config.h file. - - + STM3210B-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08 - and PC.09 pins - - The USART1 signals (Rx, Tx) must be connected to a DB9 connector using a RS232 - transceiver. - - Connect a null-modem female/female RS232 cable between the DB9 connector, - CN6 on STM3210B-EVAL board, and PC serial port. - - Hyperterminal configuration: - - Word Length = 8 Bits - - One Stop Bit - - No parity - - BaudRate = 9600 baud - - flow control: None - - Use the Key push-button connected to pin PB.09 (EXTI Line9). - - + STM3210E-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08 - and PF.09 pins - - The USART1 signals (Rx, Tx) must be connected to a DB9 connector using a RS232 - transceiver. - - Connect a null-modem female/female RS232 cable between the DB9 connector, - CN12 on STM3210E-EVAL board, and PC serial port. - - Hyperterminal configuration: - - Word Length = 8 Bits - - One Stop Bit - - No parity - - BaudRate = 9600 baud - - flow control: None - - Use the Key push-button connected to pin PG.08 (EXTI Line8). - - -How to use it -============= -In order to make the program work, you must do the following : -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files : - + stm32f10x_lib.c - + stm32f10x_exti.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_flash.c - + stm32f10x_dma.c - + stm32f10x_usart.c - -- Link all compiled files and load your image into target memory -- Run the example - - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_conf.h b/src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_conf.h deleted file mode 100755 index c286a47..0000000 --- a/src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_conf.h +++ /dev/null @@ -1,169 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -//#define _ADC -//#define _ADC1 -//#define _ADC2 -//#define _ADC3 - -/************************************* BKP ************************************/ -//#define _BKP - -/************************************* CAN ************************************/ -//#define _CAN - -/************************************* CRC ************************************/ -//#define _CRC - -/************************************* DAC ************************************/ -//#define _DAC - -/************************************* DBGMCU *********************************/ -//#define _DBGMCU -/************************************* DMA ************************************/ -#define _DMA -//#define _DMA1_Channel1 -//#define _DMA1_Channel2 -//#define _DMA1_Channel3 -//#define _DMA1_Channel4 -#define _DMA1_Channel5 -//#define _DMA1_Channel6 -//#define _DMA1_Channel7 -//#define _DMA2_Channel1 -//#define _DMA2_Channel2 -//#define _DMA2_Channel3 -//#define _DMA2_Channel4 -//#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -//#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -#define _GPIOA -#define _GPIOB -#define _GPIOC -//#define _GPIOD -//#define _GPIOE -#define _GPIOF -#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -//#define _I2C -//#define _I2C1 -//#define _I2C2 - -/************************************* IWDG ***********************************/ -//#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -//#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -//#define _RTC - -/************************************* SDIO ***********************************/ -//#define _SDIO - -/************************************* SPI ************************************/ -//#define _SPI -//#define _SPI1 -//#define _SPI2 -//#define _SPI3 - -/************************************* SysTick ********************************/ -//#define _SysTick - -/************************************* TIM ************************************/ -//#define _TIM -//#define _TIM1 -//#define _TIM2 -//#define _TIM3 -//#define _TIM4 -//#define _TIM5 -//#define _TIM6 -//#define _TIM7 -//#define _TIM8 - -/************************************* USART **********************************/ -#define _USART -#define _USART1 -//#define _USART2 -//#define _USART3 -//#define _UART4 -//#define _UART5 - -/************************************* WWDG ***********************************/ -//#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_it.c b/src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_it.c deleted file mode 100755 index 6aae663..0000000 --- a/src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_it.c +++ /dev/null @@ -1,843 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -u8 TestStatus = 0; -u16 SRC_Buffer[10] = {0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39}; -extern u16 DST_Buffer[10]; -extern vu32 LowPowerMode; -extern u8 Buffercmp16(u16*, u16*, u16); -extern void DMA_Configuration(void); - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ - if(DMA_GetITStatus(DMA1_IT_TC5)) - { - DMA_ClearITPendingBit(DMA1_IT_TC5); - - /* Check the received buffer */ - TestStatus = Buffercmp16(SRC_Buffer, DST_Buffer, 10); - - if(TestStatus == 0) - { - GPIO_WriteBit(GPIO_LED, GPIO_Pin_7, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_7))); - } - else - { - GPIO_WriteBit(GPIO_LED, GPIO_Pin_8, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_8))); - } - - /* Re-configure DMA1 */ - DMA_Configuration(); - } -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ - if(EXTI_GetITStatus(EXTI_LINE_KEY_BUTTON) != RESET) - { - EXTI_ClearITPendingBit(EXTI_LINE_KEY_BUTTON); - - LowPowerMode = 1; - } -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_it.h b/src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/NVIC/DMA_WFIMode/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/IRQ_Channels/main.c b/src/stm32lib/examples/NVIC/IRQ_Channels/main.c deleted file mode 100755 index 47b3df9..0000000 --- a/src/stm32lib/examples/NVIC/IRQ_Channels/main.c +++ /dev/null @@ -1,261 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -NVIC_InitTypeDef NVIC_InitStructure; -ErrorStatus HSEStartUpStatus; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); -void TIM_Configuration(void); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* Configure the system clocks */ - RCC_Configuration(); - - /* Configure GPIOs */ - GPIO_Configuration(); - - /* Configure TIMs */ - TIM_Configuration(); - -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif - - /* Configure one bit for preemption priority */ - NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); - - /* Enable the TIM2 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - /* Enable the TIM3 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - NVIC_Init(&NVIC_InitStructure); - - /* Enable the TIM4 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = TIM4_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; - NVIC_Init(&NVIC_InitStructure); - - while (1) - { - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - - /* Enable GPIO_LED clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_LED, ENABLE); - - /* Enable TIM2, TIM3 and TIM4 clocks */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3 | - RCC_APB1Periph_TIM4, ENABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the used GPIO pins. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Configure GPIO_LED pin 6, GPIO_LED pin 7, GPIO_LED pin 8 as output push-pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(GPIO_LED, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : TIM_Configuration -* Description : Configures the used Timers. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM_Configuration(void) -{ - TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; - TIM_OCInitTypeDef TIM_OCInitStructure; - - /* TIM2 configuration */ - TIM_TimeBaseStructure.TIM_Period = 0x4AF; - TIM_TimeBaseStructure.TIM_Prescaler = 0xEA5F; - TIM_TimeBaseStructure.TIM_ClockDivision = 0x0; - TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; - TIM_TimeBaseStructure.TIM_RepetitionCounter = 0x0000; - TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure); - - TIM_OCStructInit(&TIM_OCInitStructure); - /* Output Compare Timing Mode configuration: Channel1 */ - TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_Timing; - TIM_OCInitStructure.TIM_Pulse = 0x0; - TIM_OC1Init(TIM2, &TIM_OCInitStructure); - - /* TIM3 configuration */ - TIM_TimeBaseStructure.TIM_Period = 0x95F; - - TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure); - /* Output Compare Timing Mode configuration: Channel1 */ - TIM_OC1Init(TIM3, &TIM_OCInitStructure); - - /* TIM4 configuration */ - TIM_TimeBaseStructure.TIM_Period = 0xE0F; - - TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure); - /* Output Compare Timing Mode configuration: Channel1 */ - TIM_OC1Init(TIM4, &TIM_OCInitStructure); - - /* TIM2 enable counter */ - TIM_Cmd(TIM2, ENABLE); - /* TIM3 enable counter */ - TIM_Cmd(TIM3, ENABLE); - /* TIM4 enable counter */ - TIM_Cmd(TIM4, ENABLE); - - /* Immediate load of TIM2 Precaler value */ - TIM_PrescalerConfig(TIM2, 0xEA5F, TIM_PSCReloadMode_Immediate); - /* Immediate load of TIM3 Precaler value */ - TIM_PrescalerConfig(TIM3, 0xEA5F, TIM_PSCReloadMode_Immediate); - /* Immediate load of TIM4 Precaler value */ - TIM_PrescalerConfig(TIM4, 0xEA5F, TIM_PSCReloadMode_Immediate); - - /* Clear TIM2 update pending flag */ - TIM_ClearFlag(TIM2, TIM_FLAG_Update); - /* Clear TIM3 update pending flag */ - TIM_ClearFlag(TIM3, TIM_FLAG_Update); - /* Clear TIM4 update pending flag */ - TIM_ClearFlag(TIM4, TIM_FLAG_Update); - - /* Enable TIM2 Update interrupt */ - TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE); - /* Enable TIM3 Update interrupt */ - TIM_ITConfig(TIM3, TIM_IT_Update, ENABLE); - /* Enable TIM4 Update interrupt */ - TIM_ITConfig(TIM4, TIM_IT_Update, ENABLE); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/IRQ_Channels/platform_config.h b/src/stm32lib/examples/NVIC/IRQ_Channels/platform_config.h deleted file mode 100755 index 0bc5169..0000000 --- a/src/stm32lib/examples/NVIC/IRQ_Channels/platform_config.h +++ /dev/null @@ -1,44 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : platform_config.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Evaluation board specific configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) - //#define USE_STM3210B_EVAL - #define USE_STM3210E_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#ifdef USE_STM3210B_EVAL - #define GPIO_LED GPIOC - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOC -#elif defined USE_STM3210E_EVAL - #define GPIO_LED GPIOF - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOF -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/IRQ_Channels/readme.txt b/src/stm32lib/examples/NVIC/IRQ_Channels/readme.txt deleted file mode 100755 index 1cb8367..0000000 --- a/src/stm32lib/examples/NVIC/IRQ_Channels/readme.txt +++ /dev/null @@ -1,69 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the NVIC IRQ Channels Example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example demontrates the use of the Nested Vectored Interrupt Controller (NVIC) -IRQ Channels configuration: - -- Configuration of 3 TIM (TIM2..TIM4)timers to generate an interrupt on each - counter update event. -- The three timers are linked to their correspondant Update IRQ channel. -- Assignment of a ascendant IRQ priority for each IRQ channel : - TIM2 has a preemption priority of 0 and TIM4 has a preemption priority of 2. -- In each interrupt routine: - - TIM2 toggles a LED1 each 1s - - TIM3 toggles a LED2 each 2s - - TIM4 toggles a LED3 each 3s - - -Directory contents -================== -stm32f10x_conf.h Library Configuration file -stm32f10x_it.c Interrupt handlers -stm32f10x_it.h Interrupt handlers header file -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation -boards and can be easily tailored to any other hardware. -To select the STMicroelectronics evaluation board used to run the example, uncomment -the corresponding line in platform_config.h file. - - + STM3210B-EVAL - - Use LD1, LD2 and LD3 leds connected respectively to PC.06, PC.07 and PC.08 - - + STM3210E-EVAL - - Use LD1, LD2 and LD3 leds connected respectively to PF.06, PF0.7 and PF.08 - -How to use it -============= -In order to make the program work, you must do the following : -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files : - + stm32f10x_lib.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_tim.c - + stm32f10x_flash.c - -- Link all compiled files and load your image into target memory -- Run the example - - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_conf.h b/src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_conf.h deleted file mode 100755 index 3a4af67..0000000 --- a/src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_conf.h +++ /dev/null @@ -1,170 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -//#define _ADC -//#define _ADC1 -//#define _ADC2 -//#define _ADC3 - -/************************************* BKP ************************************/ -//#define _BKP - -/************************************* CAN ************************************/ -//#define _CAN - -/************************************* CRC ************************************/ -//#define _CRC - -/************************************* DAC ************************************/ -//#define _DAC - -/************************************* DBGMCU *********************************/ -//#define _DBGMCU - -/************************************* DMA ************************************/ -//#define _DMA -//#define _DMA1_Channel1 -//#define _DMA1_Channel2 -//#define _DMA1_Channel3 -//#define _DMA1_Channel4 -//#define _DMA1_Channel5 -//#define _DMA1_Channel6 -//#define _DMA1_Channel7 -//#define _DMA2_Channel1 -//#define _DMA2_Channel2 -//#define _DMA2_Channel3 -//#define _DMA2_Channel4 -//#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -//#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -//#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -//#define _GPIOA -//#define _GPIOB -#define _GPIOC -//#define _GPIOD -//#define _GPIOE -#define _GPIOF -//#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -//#define _I2C -//#define _I2C1 -//#define _I2C2 - -/************************************* IWDG ***********************************/ -//#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -//#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -//#define _RTC - -/************************************* SDIO ***********************************/ -//#define _SDIO - -/************************************* SPI ************************************/ -//#define _SPI -//#define _SPI1 -//#define _SPI2 -//#define _SPI3 - -/************************************* SysTick ********************************/ -//#define _SysTick - -/************************************* TIM ************************************/ -#define _TIM -//#define _TIM1 -#define _TIM2 -#define _TIM3 -#define _TIM4 -//#define _TIM5 -//#define _TIM6 -//#define _TIM7 -//#define _TIM8 - -/************************************* USART **********************************/ -//#define _USART -//#define _USART1 -//#define _USART2 -//#define _USART3 -//#define _UART4 -//#define _UART5 - -/************************************* WWDG ***********************************/ -//#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_it.c b/src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_it.c deleted file mode 100755 index ef72393..0000000 --- a/src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_it.c +++ /dev/null @@ -1,826 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ - /* Clear TIM2 update interrupt */ - TIM_ClearITPendingBit(TIM2, TIM_IT_Update); - - /* Toggle GPIO_LED pin 6 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_6, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_6))); -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ - /* Clear TIM3 update interrupt */ - TIM_ClearITPendingBit(TIM3, TIM_IT_Update); - - /* Toggle GPIO_LED pin 7 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_7, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_7))); -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ - /* Clear TIM4 update interrupt */ - TIM_ClearITPendingBit(TIM4, TIM_IT_Update); - - /* Toggle GPIO_LED pin 8 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_8, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_8))); -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_it.h b/src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/NVIC/IRQ_Channels/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/Priority/main.c b/src/stm32lib/examples/NVIC/Priority/main.c deleted file mode 100755 index 711d54a..0000000 --- a/src/stm32lib/examples/NVIC/Priority/main.c +++ /dev/null @@ -1,252 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -NVIC_InitTypeDef NVIC_InitStructure; -GPIO_InitTypeDef GPIO_InitStructure; -EXTI_InitTypeDef EXTI_InitStructure; -bool PreemptionOccured = FALSE; -u8 PreemptionPriorityValue = 0; -ErrorStatus HSEStartUpStatus; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); -void EXTI_Configuration(void); -void Delay(vu32 nCount); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* Configure the system clocks */ - RCC_Configuration(); - - /* Configure GPIOs */ - GPIO_Configuration(); - - /* Configures the EXTI Lines */ - EXTI_Configuration(); - -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif - - /* Configure one bit for preemption priority */ - NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1); - - /* Enable the EXTI0 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = PreemptionPriorityValue; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - /* Enable the EXTI9_5 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - /* Configure the SysTick Handler Priority: Preemption priority and subpriority */ - NVIC_SystemHandlerPriorityConfig(SystemHandler_SysTick, !PreemptionPriorityValue, 0); - - while (1) - { - if(PreemptionOccured != FALSE) - { - GPIO_WriteBit(GPIO_LED, GPIO_Pin_6, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_6))); - Delay(0x5FFFF); - GPIO_WriteBit(GPIO_LED, GPIO_Pin_7, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_7))); - Delay(0x5FFFF); - GPIO_WriteBit(GPIO_LED, GPIO_Pin_8, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_8))); - Delay(0x5FFFF); - GPIO_WriteBit(GPIO_LED, GPIO_Pin_9, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_9))); - Delay(0x5FFFF); - } - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - - /* Enable GPIOA, GPIO KEY Button, GPIO_LED and AFIO Clocks */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIO_KEY_BUTTON | - RCC_APB2Periph_GPIO_LED | RCC_APB2Periph_AFIO, ENABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the used GPIO pins. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Configuration(void) -{ - /* Configure GPIO_LED pin 6, GPIO_LED pin 7, GPIO_LED pin 8 and GPIO_LED pin 9 as output push-pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIO_LED, &GPIO_InitStructure); - - /* Configure PA.00 as input floating */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIOA, &GPIO_InitStructure); - - /* Configure KEY Button GPIO pin as input floating */ - GPIO_InitStructure.GPIO_Pin = GPIO_PIN_KEY_BUTTON; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIO_KEY_BUTTON, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : EXTI_Configuration -* Description : Configures the used EXTI lines. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_Configuration(void) -{ - /* Connect EXTI Line0 to PA.00 */ - GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource0); - - /* Configure EXTI Line0 to generate an interrupt on falling edge */ - EXTI_InitStructure.EXTI_Line = EXTI_Line0; - EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStructure.EXTI_LineCmd = ENABLE; - EXTI_Init(&EXTI_InitStructure); - - /* Connect KEY Button EXTI Line to KEY Button GPIO pin */ - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KEY_BUTTON, GPIO_PIN_SOURCE_KEY_BUTTON); - - /* Configure KEY Button EXTI Line to generate an interrupt on falling edge */ - EXTI_InitStructure.EXTI_Line = EXTI_LINE_KEY_BUTTON; - EXTI_Init(&EXTI_InitStructure); -} - -/******************************************************************************* -* Function Name : Delay -* Description : Inserts a delay time. -* Input : nCount: specifies the delay time length. -* Output : None -* Return : None -*******************************************************************************/ -void Delay(vu32 nCount) -{ - for(; nCount != 0; nCount--); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/Priority/platform_config.h b/src/stm32lib/examples/NVIC/Priority/platform_config.h deleted file mode 100755 index 3deb7ba..0000000 --- a/src/stm32lib/examples/NVIC/Priority/platform_config.h +++ /dev/null @@ -1,56 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : platform_config.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Evaluation board specific configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) - //#define USE_STM3210B_EVAL - #define USE_STM3210E_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#ifdef USE_STM3210B_EVAL - #define GPIO_LED GPIOC - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOC - #define GPIO_KEY_BUTTON GPIOB - #define RCC_APB2Periph_GPIO_KEY_BUTTON RCC_APB2Periph_GPIOB - #define GPIO_PIN_KEY_BUTTON GPIO_Pin_9 - #define EXTI_LINE_KEY_BUTTON EXTI_Line9 - #define GPIO_PORT_SOURCE_KEY_BUTTON GPIO_PortSourceGPIOB - #define GPIO_PIN_SOURCE_KEY_BUTTON GPIO_PinSource9 -#elif defined USE_STM3210E_EVAL - #define GPIO_LED GPIOF - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOF - #define GPIO_KEY_BUTTON GPIOG - #define RCC_APB2Periph_GPIO_KEY_BUTTON RCC_APB2Periph_GPIOG - #define GPIO_PIN_KEY_BUTTON GPIO_Pin_8 - #define EXTI_LINE_KEY_BUTTON EXTI_Line8 - #define GPIO_PORT_SOURCE_KEY_BUTTON GPIO_PortSourceGPIOG - #define GPIO_PIN_SOURCE_KEY_BUTTON GPIO_PinSource8 -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/Priority/readme.txt b/src/stm32lib/examples/NVIC/Priority/readme.txt deleted file mode 100755 index bd6c360..0000000 --- a/src/stm32lib/examples/NVIC/Priority/readme.txt +++ /dev/null @@ -1,97 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the NVIC Priority Example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example demontrates the use of the Nested Vectored Interrupt Controller (NVIC): - -- Configuration of 2 EXTI Lines (Wakeup button EXTI Line & Key button EXTI Line) - to generate an interrupt on each falling edge and use the SysTick interrupt. -- These interrupts are configured with the following parameters: - Wakeup button EXTI Line: o PreemptionPriority = PreemptionPriorityValue - o SubPriority = 0 - Key button EXTI Line: o PreemptionPriority = 0 - o SubPriority = 1 - SysTick Handler: o PreemptionPriority = !PreemptionPriorityValue - o SubPriority = 0 -First, the PreemptionPriorityValue is equal to 0, the Wakeup button EXTI Line -has higher preemption priority than the SysTick handler. - -In the key button EXTI Line interrupt routine the Wakeup button EXTI Line and -SysTick preemption priorities are inverted. -In the Wakeup button EXTI Line interrupt routine the pending bit of the SysTick -interrupt is set this will cause SysTick ISR to preempt the Wakeup button EXTI -Line ISR only if it has higher preemption priority. - -The system behaves as following: -1) The first time Key button EXTI Line interrupt occurs the SysTick preemption -become higher than Wakeup button EXTI Line one. So when the Wakeup button EXTI -Line interrupt occurs, the SysTick ISR is executed and the PreemptionOccured -variable become TRUE and the four leds (LD1, LD2, LD3, LD4) start toggling. - -2) When the next Key button EXTI Line interrupt occurs the SysTick preemption -become lower than Wakeup button EXTI Line one. So when the Wakeup button EXTI Line -interrupt occurs, the PreemptionOccured variable became FALSE and the four leds -(LD1, LD2, LD3, LD4) stop toggling. - -Then this behavior is repeated from point 1) in an infinite loop. - - -Directory contents -================== -platform_config.h Evaluation board specific configuration file -stm32f10x_conf.h Library Configuration file -stm32f10x_it.c Interrupt handlers -stm32f10x_it.h Interrupt handlers header file -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation -boards and can be easily tailored to any other hardware. -To select the STMicroelectronics evaluation board used to run the example, uncomment -the corresponding line in platform_config.h file. - - + STM3210B-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08 - and PC.09 pins - - Use the Key push-button connected to pin PB.09 (EXTI Line9). - - Use the Wakeup push-button connected to pin PA.00 (EXTI Line0). - - + STM3210E-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08 - and PF.09 pins - - Use the Key push-button connected to pin PG.08 (EXTI Line8). - - Use the Wakeup push-button connected to pin PA.00 (EXTI Line0). - - -How to use it -============= -In order to make the program work, you must do the following : -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files : - + stm32f10x_lib.c - + stm32f10x_exti.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_flash.c - -- Link all compiled files and load your image into target memory -- Run the example - - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/NVIC/Priority/stm32f10x_conf.h b/src/stm32lib/examples/NVIC/Priority/stm32f10x_conf.h deleted file mode 100755 index 5244ccd..0000000 --- a/src/stm32lib/examples/NVIC/Priority/stm32f10x_conf.h +++ /dev/null @@ -1,170 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -//#define _ADC -//#define _ADC1 -//#define _ADC2 -//#define _ADC3 - -/************************************* BKP ************************************/ -//#define _BKP - -/************************************* CAN ************************************/ -//#define _CAN - -/************************************* CRC ************************************/ -//#define _CRC - -/************************************* DAC ************************************/ -//#define _DAC - -/************************************* DBGMCU *********************************/ -//#define _DBGMCU - -/************************************* DMA ************************************/ -//#define _DMA -//#define _DMA1_Channel1 -//#define _DMA1_Channel2 -//#define _DMA1_Channel3 -//#define _DMA1_Channel4 -//#define _DMA1_Channel5 -//#define _DMA1_Channel6 -//#define _DMA1_Channel7 -//#define _DMA2_Channel1 -//#define _DMA2_Channel2 -//#define _DMA2_Channel3 -//#define _DMA2_Channel4 -//#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -//#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -#define _GPIOA -#define _GPIOB -#define _GPIOC -//#define _GPIOD -//#define _GPIOE -#define _GPIOF -#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -//#define _I2C -//#define _I2C1 -//#define _I2C2 - -/************************************* IWDG ***********************************/ -//#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -//#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -//#define _RTC - -/************************************* SDIO ***********************************/ -//#define _SDIO - -/************************************* SPI ************************************/ -//#define _SPI -//#define _SPI1 -//#define _SPI2 -//#define _SPI3 - -/************************************* SysTick ********************************/ -//#define _SysTick - -/************************************* TIM ************************************/ -//#define _TIM -//#define _TIM1 -//#define _TIM2 -//#define _TIM3 -//#define _TIM4 -//#define _TIM5 -//#define _TIM6 -//#define _TIM7 -//#define _TIM8 - -/************************************* USART **********************************/ -//#define _USART -//#define _USART1 -//#define _USART2 -//#define _USART3 -//#define _UART4 -//#define _UART5 - -/************************************* WWDG ***********************************/ -//#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/Priority/stm32f10x_it.c b/src/stm32lib/examples/NVIC/Priority/stm32f10x_it.c deleted file mode 100755 index 2a189bd..0000000 --- a/src/stm32lib/examples/NVIC/Priority/stm32f10x_it.c +++ /dev/null @@ -1,844 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -extern bool PreemptionOccured; -extern u8 PreemptionPriorityValue; - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ - /* If the EXTI0 IRQ Handler was preempted by SysTick Handler */ - if(NVIC_GetIRQChannelActiveBitStatus(EXTI0_IRQChannel) != RESET) - { - PreemptionOccured = TRUE; - } -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ - /* Generate SysTick exception */ - NVIC_SetSystemHandlerPendingBit(SystemHandler_SysTick); - - /* Clear EXTI Line0 pending bit */ - EXTI_ClearITPendingBit(EXTI_Line0); -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ - NVIC_InitTypeDef NVIC_InitStructure; - - if(EXTI_GetITStatus(EXTI_LINE_KEY_BUTTON) != RESET) - { - PreemptionPriorityValue = !PreemptionPriorityValue; - PreemptionOccured = FALSE; - - /* Modify the EXTI0 Interrupt Preemption Priority */ - NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = PreemptionPriorityValue; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - /* Configure the SysTick Handler Priority: Preemption priority and subpriority */ - NVIC_SystemHandlerPriorityConfig(SystemHandler_SysTick, !PreemptionPriorityValue, 0); - - /* Clear EXTI_LINE_KEY_BUTTON pending bit */ - EXTI_ClearITPendingBit(EXTI_LINE_KEY_BUTTON); - } -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/Priority/stm32f10x_it.h b/src/stm32lib/examples/NVIC/Priority/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/NVIC/Priority/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/System_Handlers/main.c b/src/stm32lib/examples/NVIC/System_Handlers/main.c deleted file mode 100755 index d9e6f30..0000000 --- a/src/stm32lib/examples/NVIC/System_Handlers/main.c +++ /dev/null @@ -1,193 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -NVIC_InitTypeDef NVIC_InitStructure; -ErrorStatus HSEStartUpStatus; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* Configure the system clocks */ - RCC_Configuration(); - - /* Configure GPIOs */ - GPIO_Configuration(); - - -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif - - /* SysTick interrupt each 1 Hz with Counter clock equal to 72MHz/8 = 9MHz */ - SysTick_SetReload(9000000); - - /* Enable the SysTick Interrupt */ - SysTick_ITConfig(ENABLE); - - /* Enable the SysTick Counter */ - SysTick_CounterCmd(SysTick_Counter_Enable); - - /* Configure 2 bits for preemption priority 2 bits for subpriority */ - NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); - - /* Configure the SysTick Handler Priority: - - preemption priority : 2 - - subpriority : 0 */ - NVIC_SystemHandlerPriorityConfig(SystemHandler_SysTick, 2, 0); - - /* Configure the PSV Handler Priority: - - preemption priority : 0 - - subpriority : 0 */ - NVIC_SystemHandlerPriorityConfig(SystemHandler_PSV, 0, 0); - - /* Configure the SVCall Handler Priority: - - preemption priority : 1 - - subpriority : 0 */ - - NVIC_SystemHandlerPriorityConfig(SystemHandler_SVCall, 1, 0); - - while (1) - { - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - - /* Enable GPIO_LED clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_LED, ENABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the used GPIO pins. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Configure GPIO_LED pin 6, GPIO_LED pin 7, GPIO_LED pin 8 and GPIO_LED pin 9 as output push-pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(GPIO_LED, &GPIO_InitStructure); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/System_Handlers/platform_config.h b/src/stm32lib/examples/NVIC/System_Handlers/platform_config.h deleted file mode 100755 index 0bc5169..0000000 --- a/src/stm32lib/examples/NVIC/System_Handlers/platform_config.h +++ /dev/null @@ -1,44 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : platform_config.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Evaluation board specific configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) - //#define USE_STM3210B_EVAL - #define USE_STM3210E_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#ifdef USE_STM3210B_EVAL - #define GPIO_LED GPIOC - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOC -#elif defined USE_STM3210E_EVAL - #define GPIO_LED GPIOF - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOF -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/System_Handlers/readme.txt b/src/stm32lib/examples/NVIC/System_Handlers/readme.txt deleted file mode 100755 index c67dea2..0000000 --- a/src/stm32lib/examples/NVIC/System_Handlers/readme.txt +++ /dev/null @@ -1,80 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the NVIC System Handlers Example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example demontrates the use of the Nested Vectored Interrupt Controller (NVIC) -and system handlers: - -- Assignment of a descendant system handlers preemption priority for each system -handler: - - NMI has -1 as preemption priority - - PSV has 0 preemption priority - - SVCall has 1 preemption priority - - SysTick has 2 preemption priority - -- Configuration of SysTick timer to generate an interrupt on each end of count - -- In the Systick handler routine: a LED1 toggle each 1s and the SVC instruction -is executed. This will activate the SVCall handler to preempt the current instruction -stream. In the SVCall handler routine, a led connected to LED2 pin is toggling and the -pending bit of the PSV handler is set by software. -The PSV which has a higher preemption priority will preempt the SVCall handler and -will toggle a LED3. Also, in this handler routine, the NMI pending bit is set and -the NMI handler is activated and the LED4 is toggling. - - -Directory contents -================== -platform_config.h Evaluation board specific configuration file -stm32f10x_conf.h Library Configuration file -stm32f10x_it.c Interrupt handlers -stm32f10x_it.h Interrupt handlers header file -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation -boards and can be easily tailored to any other hardware. -To select the STMicroelectronics evaluation board used to run the example, uncomment -the corresponding line in platform_config.h file. - - + STM3210B-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08 - and PC.09 pins - - + STM3210E-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08 - and PF.09 pins - - -How to use it -============= -In order to make the program work, you must do the following : -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files : - + stm32f10x_lib.c - + stm32f10x_systick.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_flash.c - -- Link all compiled files and load your image into target memory -- Run the example - - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_conf.h b/src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_conf.h deleted file mode 100755 index f421f9a..0000000 --- a/src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_conf.h +++ /dev/null @@ -1,170 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -//#define _ADC -//#define _ADC1 -//#define _ADC2 -//#define _ADC3 - -/************************************* BKP ************************************/ -//#define _BKP - -/************************************* CAN ************************************/ -//#define _CAN - -/************************************* CRC ************************************/ -//#define _CRC - -/************************************* DAC ************************************/ -//#define _DAC - -/************************************* DBGMCU *********************************/ -//#define _DBGMCU - -/************************************* DMA ************************************/ -//#define _DMA -//#define _DMA1_Channel1 -//#define _DMA1_Channel2 -//#define _DMA1_Channel3 -//#define _DMA1_Channel4 -//#define _DMA1_Channel5 -//#define _DMA1_Channel6 -//#define _DMA1_Channel7 -//#define _DMA2_Channel1 -//#define _DMA2_Channel2 -//#define _DMA2_Channel3 -//#define _DMA2_Channel4 -//#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -//#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -//#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -//#define _GPIOA -//#define _GPIOB -#define _GPIOC -//#define _GPIOD -//#define _GPIOE -#define _GPIOF -//#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -//#define _I2C -//#define _I2C1 -//#define _I2C2 - -/************************************* IWDG ***********************************/ -//#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -//#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -//#define _RTC - -/************************************* SDIO ***********************************/ -//#define _SDIO - -/************************************* SPI ************************************/ -//#define _SPI -//#define _SPI1 -//#define _SPI2 -//#define _SPI3 - -/************************************* SysTick ********************************/ -#define _SysTick - -/************************************* TIM ************************************/ -//#define _TIM -//#define _TIM1 -//#define _TIM2 -//#define _TIM3 -//#define _TIM4 -//#define _TIM5 -//#define _TIM6 -//#define _TIM7 -//#define _TIM8 - -/************************************* USART **********************************/ -//#define _USART -//#define _USART1 -//#define _USART2 -//#define _USART3 -//#define _UART4 -//#define _UART5 - -/************************************* WWDG ***********************************/ -//#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_it.c b/src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_it.c deleted file mode 100755 index c588064..0000000 --- a/src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_it.c +++ /dev/null @@ -1,826 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "platform_config.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ - /* Toggle GPIO_LED pin 9 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_9, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_9))); -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ - /* Set the PSV system handler pending bit */ - NVIC_SetSystemHandlerPendingBit(SystemHandler_PSV); - - /* Toggle GPIO_LED pin 7 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_7, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_7))); -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ - /* Set the NMI system handler pending bit */ - NVIC_SetSystemHandlerPendingBit(SystemHandler_NMI); - - /* Toggle GPIO_LED pin 8 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_8, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_8))); -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ - __SVC(); - /* Toggle GPIO_LED pin 6 */ - GPIO_WriteBit(GPIO_LED, GPIO_Pin_6, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_6))); -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_it.h b/src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/NVIC/System_Handlers/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/EWARMv4/lnkarm_flash_offset.xcl b/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/EWARMv4/lnkarm_flash_offset.xcl deleted file mode 100755 index fcb8787..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/EWARMv4/lnkarm_flash_offset.xcl +++ /dev/null @@ -1,191 +0,0 @@ -/*;******************** (C) COPYRIGHT 2008 STMicroelectronics ****************** -;* File Name : lnkarm_flash.xcl -;* Author : MCD Application Team -;* Version : V2.0.1 -;* Date : 06/13/2008 -;* Description : XLINK command file template for EWARM/ICCARM -;* Usage : xlink -f lnkarm -;* : -s -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************/ - -// Code memory in FLASH --DROMSTART=0x8002000 --DROMEND=0x807FFFF - -// Data in RAM --DRAMSTART=0x20000000 --DRAMEND=0x2000FFFF - -//************************************************************************* -// ------------- -// Code segments - may be placed anywhere in memory. -// ------------- -// -// INTVEC -- Exception vector table. -// SWITAB -- Software interrupt vector table. -// ICODE -- Startup (cstartup) and exception code. -// DIFUNCT -- Dynamic initialization vectors used by C++. -// CODE -- Compiler generated code. -// CODE_I -- Compiler generated code declared __ramfunc (executes in RAM) -// CODE_ID -- Initializer for CODE_I (ROM). -// -// ------------- -// Data segments - may be placed anywhere in memory. -// ------------- -// -// CSTACK -- The stack used by C/C++ programs (system and user mode). -// HEAP -- The heap used by malloc and free in C and new and -// delete in C++. -// INITTAB -- Table containing addresses and sizes of segments that -// need to be initialized at startup (by cstartup). -// CHECKSUM -- The linker places checksum byte(s) in this segment, -// when the -J linker command line option is used. -// DATA_y -- Data objects. -// -// Where _y can be one of: -// -// _AN -- Holds uninitialized located objects, i.e. objects with -// an absolute location given by the @ operator or the -// #pragma location directive. Since these segments -// contain objects which already have a fixed address, -// they should not be mentioned in this linker command -// file. -// _C -- Constants (ROM). -// _I -- Initialized data (RAM). -// _ID -- The original content of _I (copied to _I by cstartup) (ROM). -// _N -- Uninitialized data (RAM). -// _Z -- Zero initialized data (RAM). -// -// Note: Be sure to use end values for the defined address ranges. -// Otherwise, the linker may allocate space outside the -// intended memory range. -//************************************************************************* - - -//************************************************ -// Inform the linker about the CPU family used. -//************************************************ - --carm - -//************************************************************************* -// Segment placement - General information -// -// All numbers in the segment placement command lines below are interpreted -// as hexadecimal unless they are immediately preceded by a '.', which -// denotes decimal notation. -// -// When specifying the segment placement using the -P instead of the -Z -// option, the linker is free to split each segment into its segment parts -// and randomly place these parts within the given ranges in order to -// achieve a more efficient memory usage. One disadvantage, however, is -// that it is not possible to find the start or end address (using -// the assembler operators .sfb./.sfe.) of a segment which has been split -// and reformed. -// -// When generating an output file which is to be used for programming -// external ROM/Flash devices, the -M linker option is very useful -// (see xlink.pdf for details). -//************************************************************************* - - -//************************************************************************* -// Read-only segments mapped to ROM. -//************************************************************************* - -//************************************************ -// Address range for reset and exception -// vectors (INTVEC). -//************************************************ - --Z(CODE)INTVEC=ROMSTART-ROMEND - -//************************************************ -// Startup code and exception routines (ICODE). -//************************************************ - --Z(CODE)ICODE,DIFUNCT=ROMSTART-ROMEND --Z(CODE)SWITAB=ROMSTART-ROMEND - -//************************************************ -// Code segments may be placed anywhere. -//************************************************ - --Z(CODE)CODE=ROMSTART-ROMEND - -//************************************************ -// Original ROM location for __ramfunc code copied -// to and executed from RAM. -//************************************************ - --Z(CONST)CODE_ID=ROMSTART-ROMEND - -//************************************************ -// Various constants and initializers. -//************************************************ - --Z(CONST)INITTAB,DATA_ID,DATA_C=ROMSTART-ROMEND --Z(CONST)CHECKSUM=ROMSTART-ROMEND - - -//************************************************************************* -// Read/write segments mapped to RAM. -//************************************************************************* - -//************************************************ -// Data segments. -//************************************************ - --Z(DATA)DATA_I,DATA_Z,DATA_N=RAMSTART-RAMEND - -//************************************************ -// __ramfunc code copied to and executed from RAM. -//************************************************ - --Z(DATA)CODE_I=RAMSTART-RAMEND - -//************************************************ -// ICCARM produces code for __ramfunc functions in -// CODE_I segments. The -Q XLINK command line -// option redirects XLINK to emit the code in the -// CODE_ID segment instead, but to keep symbol and -// debug information associated with the CODE_I -// segment, where the code will execute. -//************************************************ - --QCODE_I=CODE_ID - -//************************************************************************* -// Stack and heap segments. -//************************************************************************* - --D_CSTACK_SIZE=400 --D_HEAP_SIZE=200 - --Z(DATA)CSTACK+_CSTACK_SIZE=RAMSTART-RAMEND --Z(DATA)HEAP+_HEAP_SIZE=RAMSTART-RAMEND - -//************************************************************************* -// ELF/DWARF support. -// -// Uncomment the line "-Felf" below to generate ELF/DWARF output. -// Available format specifiers are: -// -// "-yn": Suppress DWARF debug output -// "-yp": Multiple ELF program sections -// "-yas": Format suitable for debuggers from ARM Ltd (also sets -p flag) -// -// "-Felf" and the format specifiers can also be supplied directly as -// command line options, or selected from the Xlink Output tab in the -// IAR Embedded Workbench. -//************************************************************************* - -// -Felf - diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/EWARMv5/stm32f10x_flash_offset.icf b/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/EWARMv5/stm32f10x_flash_offset.icf deleted file mode 100755 index ac30a01..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/EWARMv5/stm32f10x_flash_offset.icf +++ /dev/null @@ -1,31 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\a_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08002000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08002000 ; -define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x400; -define symbol __ICFEDIT_size_heap__ = 0x200; -/**** End of ICF editor section. ###ICF###*/ - - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; - -place in ROM_region { readonly }; -place in RAM_region { readwrite, - block CSTACK, block HEAP }; diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32F10x_offset.lsl b/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32F10x_offset.lsl deleted file mode 100755 index 164cf72..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32F10x_offset.lsl +++ /dev/null @@ -1,132 +0,0 @@ -// define rom size -#define __ROM_SIZE 512k -#define __ROM_ADDR 0x08002000 -// define ram size -#define __RAM_SIZE 64k -#define __RAM_ADDR 0x20000000 - -#define __NR_OF_VECTORS 42 -#define __VECTOR_TABLE_SIZE (__NR_OF_VECTORS * 4) -#define __VECTOR_TABLE_ROM_ADDR 0x08002000 -#define _Vectors 0x08002000 - -#define _ENTRYADDR (0x08002001 + __VECTOR_TABLE_SIZE + 80) /* xB0 */ - -#define _START max(_ENTRYADDR, 0x08002165) - -#define __RESET 0x08002004 - -#define __STACK 0x400 -#define __STACKADDR (__RAM_ADDR + __RAM_SIZE - __STACK) -#define __HEAP 2k - -#define __TABLE_RAM_SIZE 20 -#define __TABLE_RAM_ADDR (__STACKADDR - __STACK - __TABLE_RAM_SIZE) - - -#define __MEMORY - -#define __PROCESSOR_MODE 0x10 /* User mode */ -#define __IRQ_BIT 0x80 /* IRQ interrupts disabled */ -#define __FIQ_BIT 0x40 /* FIQ interrupts disabled */ -#define __APPLICATION_MODE (__PROCESSOR_MODE | __IRQ_BIT | __FIQ_BIT) - - -architecture ARM -{ - endianness - { - little; - big; - } - space linear - { - id = 1; - mau = 8; - align = 4; - map (size = 4G, dest = bus:local_bus); - - copytable - ( - align = 4, - copy_unit = 1, - dest = linear - ); - start_address - ( - // It is not strictly necessary to define a run_addr for _START - // because hardware starts execution at address 0x0 which should - // be the vector table with a jump to the relocatable _START, but - // an absolute address can prevent the branch to be out-of-range. - // Or _START may be the entry point at reset and the reset handler - // copies the vector table to address 0x0 after some ROM/RAM memory - // re-mapping. In that case _START should be at a fixed address - // in ROM, specifically the alias of address 0x0 before memory - // re-mapping. - run_addr = _START, - symbol = "_START" - ); - - stack "stack" - ( - - align = 4, - min_size = __STACK, - grows = high_to_low - ); - heap "heap" - ( - align = 4, - min_size=__HEAP - ); - section_layout - { - "_lc_ub_vector_table" = __VECTOR_TABLE_ROM_ADDR; - "_lc_ue_vector_table" = __VECTOR_TABLE_ROM_ADDR + __VECTOR_TABLE_SIZE + 8; -// "_lc_ub_table" = __TABLE_RAM_ADDR; -// "_lc_ue_table" = __TABLE_RAM_ADDR + __TABLE_RAM_SIZE; - "_lc_ub_vector_table_copy" := "_lc_ub_vector_table"; - "_lc_ue_vector_table_copy" := "_lc_ue_vector_table"; - - group ( ordered, run_addr=__VECTOR_TABLE_ROM_ADDR ) - { - select ".text.vector"; - - } - -#ifdef __HEAPADDR - group ( ordered, run_addr=__HEAPADDR ) - { - select "heap"; - } -#endif - group ( ordered, run_addr=__STACKADDR) - { - select "stack"; - } - } - } - bus local_bus - { - mau = 8; - width = 32; - } -} -/////////////////////////////////////////////////////////////////// - - -memory flash -{ - mau = 8; - type = rom; - size = __ROM_SIZE; - map ( size = __ROM_SIZE, dest_offset = __ROM_ADDR, dest = bus:ARM:local_bus ); -} - -memory sram -{ - mau = 8; - type = ram; - size = __RAM_SIZE; - map ( size = __RAM_SIZE, dest_offset = __RAM_ADDR, dest = bus:ARM:local_bus ); -} diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/HiTOP/link_offset.lnk b/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/HiTOP/link_offset.lnk deleted file mode 100755 index 5bfdd21..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/HiTOP/link_offset.lnk +++ /dev/null @@ -1,5 +0,0 @@ --d"./settings/STM32F10x_offset.lsl" ---optimize=0 ---map-file-format=2 -$(LinkObjects) ---output=.\Objects\$(Target) \ No newline at end of file diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/RIDE/stm32f10x_flash_offset.ld b/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/RIDE/stm32f10x_flash_offset.ld deleted file mode 100755 index 0fb109f..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/linker/RIDE/stm32f10x_flash_offset.ld +++ /dev/null @@ -1,250 +0,0 @@ -/* -Default linker script for STM32F10x_512K_64K -Copyright RAISONANCE S.A.S. 2008 -*/ - -/* include the common STM32F10x sub-script */ - -/* Common part of the linker scripts for STM32 devices*/ - - -/* default stack sizes. - -These are used by the startup in order to allocate stacks for the different modes. -*/ - -__Stack_Size = 1024 ; - -PROVIDE ( _Stack_Size = __Stack_Size ) ; - -__Stack_Init = _estack - __Stack_Size ; - -/*"PROVIDE" allows to easily override these values from an object file or the commmand line.*/ -PROVIDE ( _Stack_Init = __Stack_Init ) ; - -/* -There will be a link error if there is not this amount of RAM free at the end. -*/ -_Minimum_Stack_Size = 0x100 ; - - -/* include the memory spaces definitions sub-script */ -/* -Linker subscript for STM32F10x definitions with 512K Flash and 64K RAM */ - -/* Memory Spaces Definitions */ - -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K - FLASH (rx) : ORIGIN = 0x8002000, LENGTH = 512K-0x2000 - FLASHB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB0 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB2 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB3 (rx) : ORIGIN = 0x00000000, LENGTH = 0 -} - -/* higher address of the user mode stack */ -_estack = 0x20010000; - - - -/* include the sections management sub-script for FLASH mode */ -/* -Common part of the linker scripts for STR71x devices in FLASH mode -(that is, the FLASH is seen at 0) -Copyright RAISONANCE 2005 -You can use, modify and distribute thisfile freely, but without any waranty. -*/ - - - -/* Sections Definitions */ - -SECTIONS -{ - /* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* for some STRx devices, the beginning of the startup code is stored in the .flashtext section, which goes to FLASH */ - .flashtext : - { - . = ALIGN(4); - *(.flashtext) /* Startup code */ - . = ALIGN(4); - } >FLASH - - - /* the program code is stored in the .text section, which goes to Flash */ - .text : - { - . = ALIGN(4); - - *(.text) /* remaining code */ - *(.text.*) /* remaining code */ - *(.rodata) /* read-only data (constants) */ - *(.rodata*) - *(.glue_7) - *(.glue_7t) - - . = ALIGN(4); - _etext = .; - /* This is used by the startup in order to initialize the .data secion */ - _sidata = _etext; - } >FLASH - - - - /* This is the initialized data section - The program executes knowing that the data is in the RAM - but the loader puts the initial values in the FLASH (inidata). - It is one task of the startup to copy the initial values from FLASH to RAM. */ - .data : AT ( _sidata ) - { - . = ALIGN(4); - /* This is used by the startup in order to initialize the .data secion */ - _sdata = . ; - - *(.data) - *(.data.*) - - . = ALIGN(4); - /* This is used by the startup in order to initialize the .data secion */ - _edata = . ; - } >RAM - - - - /* This is the uninitialized data section */ - .bss : - { - . = ALIGN(4); - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; - - *(.bss) - *(COMMON) - - . = ALIGN(4); - /* This is used by the startup in order to initialize the .bss secion */ - _ebss = . ; - } >RAM - - PROVIDE ( end = _ebss ); - PROVIDE ( _end = _ebss ); - - /* This is the user stack section - This is just to check that there is enough RAM left for the User mode stack - It should generate an error if it's full. - */ - ._usrstack : - { - . = ALIGN(4); - _susrstack = . ; - - . = . + _Minimum_Stack_Size ; - - . = ALIGN(4); - _eusrstack = . ; - } >RAM - - - - /* this is the FLASH Bank1 */ - /* the C or assembly source must explicitly place the code or data there - using the "section" attribute */ - .b1text : - { - *(.b1text) /* remaining code */ - *(.b1rodata) /* read-only data (constants) */ - *(.b1rodata*) - } >FLASHB1 - - /* this is the EXTMEM */ - /* the C or assembly source must explicitly place the code or data there - using the "section" attribute */ - - /* EXTMEM Bank0 */ - .eb0text : - { - *(.eb0text) /* remaining code */ - *(.eb0rodata) /* read-only data (constants) */ - *(.eb0rodata*) - } >EXTMEMB0 - - /* EXTMEM Bank1 */ - .eb1text : - { - *(.eb1text) /* remaining code */ - *(.eb1rodata) /* read-only data (constants) */ - *(.eb1rodata*) - } >EXTMEMB1 - - /* EXTMEM Bank2 */ - .eb2text : - { - *(.eb2text) /* remaining code */ - *(.eb2rodata) /* read-only data (constants) */ - *(.eb2rodata*) - } >EXTMEMB2 - - /* EXTMEM Bank0 */ - .eb3text : - { - *(.eb3text) /* remaining code */ - *(.eb3rodata) /* read-only data (constants) */ - *(.eb3rodata*) - } >EXTMEMB3 - - - - /* after that it's only debugging information. */ - - /* remove the debugging information from the standard libraries */ - DISCARD : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/main.c b/src/stm32lib/examples/NVIC/VectorTable_Relocation/main.c deleted file mode 100755 index bc22e81..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/main.c +++ /dev/null @@ -1,216 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -GPIO_InitTypeDef GPIO_InitStructure; -static vu32 TimingDelay; -ErrorStatus HSEStartUpStatus; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void NVIC_Configuration(void); -void Delay(vu32 nTime); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* System Clocks Configuration */ - RCC_Configuration(); - - /* Configure GPIO_LED pin 6, pin 7, pin 8 and pin 9 as Output push-pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIO_LED, &GPIO_InitStructure); - - /* Turn on Leds connected to GPIO_LED pin 6 and pin 8 */ - GPIO_Write(GPIO_LED, GPIO_Pin_6 | GPIO_Pin_8); - - /* NVIC configuration */ - NVIC_Configuration(); - - /* SysTick end of count event each 1ms with input clock equal to 9MHz (HCLK/8, default) */ - SysTick_SetReload(9000); - - /* Enable SysTick interrupt */ - SysTick_ITConfig(ENABLE); - - while (1) - { - /* Toggle leds connected to GPIO_LED pin 6, GPIO_LED pin 7, GPIO_LED pin 8 - and GPIO_LED pin 9 pins */ - GPIO_Write(GPIO_LED, (u16)~GPIO_ReadOutputData(GPIO_LED)); - - /* Insert 500 ms delay */ - Delay(500); - - /* Toggle leds connected to GPIO_LED pin 6, pin 7, pin 8 and pin 9 */ - GPIO_Write(GPIO_LED, (u16)~GPIO_ReadOutputData(GPIO_LED)); - - /* Insert 300 ms delay */ - Delay(300); - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - - /* Enable GPIO_LED clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_LED, ENABLE); -} - -/******************************************************************************* -* Function Name : NVIC_Configuration -* Description : Configures Vector Table base location. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Configuration(void) -{ - /* Set the Vector Table base location at 0x08002000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x2000); -} - -/******************************************************************************* -* Function Name : Delay -* Description : Inserts a delay time. -* Input : nTime: specifies the delay time length, in milliseconds. -* Output : None -* Return : None -*******************************************************************************/ -void Delay(u32 nTime) -{ - /* Enable the SysTick Counter */ - SysTick_CounterCmd(SysTick_Counter_Enable); - - TimingDelay = nTime; - - while(TimingDelay != 0); - - /* Disable SysTick Counter */ - SysTick_CounterCmd(SysTick_Counter_Disable); - /* Clear SysTick Counter */ - SysTick_CounterCmd(SysTick_Counter_Clear); -} - -/******************************************************************************* -* Function Name : TimingDelay_Decrement -* Description : Decrements the TimingDelay variable. -* Input : None -* Output : TimingDelay -* Return : None -*******************************************************************************/ -void TimingDelay_Decrement(void) -{ - if (TimingDelay != 0x00) - { - TimingDelay--; - } -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/main.h b/src/stm32lib/examples/NVIC/VectorTable_Relocation/main.h deleted file mode 100755 index feefea5..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/main.h +++ /dev/null @@ -1,32 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Header for main.c module -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MAIN_H -#define __MAIN_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" -#include "platform_config.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void TimingDelay_Decrement(void); - -#endif /* __MAIN_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/platform_config.h b/src/stm32lib/examples/NVIC/VectorTable_Relocation/platform_config.h deleted file mode 100755 index 0bc5169..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/platform_config.h +++ /dev/null @@ -1,44 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : platform_config.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Evaluation board specific configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) - //#define USE_STM3210B_EVAL - #define USE_STM3210E_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#ifdef USE_STM3210B_EVAL - #define GPIO_LED GPIOC - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOC -#elif defined USE_STM3210E_EVAL - #define GPIO_LED GPIOF - #define RCC_APB2Periph_GPIO_LED RCC_APB2Periph_GPIOF -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/readme.txt b/src/stm32lib/examples/NVIC/VectorTable_Relocation/readme.txt deleted file mode 100755 index f9aec02..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/readme.txt +++ /dev/null @@ -1,131 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the NVIC VectorTable_Relocation Example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example describes how to use the NVIC firmware library to set the CortexM3 -vector table in a specific address other than default. - -This can be used to build program which will be loaded into Flash memory by an -application previously programmed from the Flash memory base address. -Such application can be In-Application Programming (IAP, through USART) or -Device Firmware Upgrade (DFU, through USB). -These applications are available for download from the ST microcontrollers -website: www.st.com/stm32 - -The associated program implements a "Delay" function based on SysTick end of count -interrupt, and toggles four leds with timing defined by the "Delay" function. - -When using the IAP to load your porgram, the vector table must be relocated at -address 0x08002000. -When using the DFU to load your porgram, the vector table must be relocated at -address 0x08003000. - - -Directory contents -================== - + \linker - + \EWARMv4 - + lnkarm_flash_offset.xcl XLINK command file template for EWARM4 - + \EWARMv5 - + stm32f10x_flash_offset.icf ILINK command file template for EWARM5 - + \RIDE - + stm32f10x_flash.ld linker script for RIDE - + \HiTOP - + STM32F10x_offset.lsl linker file for HiTOP - + link_offset script for HiTOP - - + platform_config.h Evaluation board specific configuration file - + stm32f10x_conf.h Library Configuration file - + stm32f10x_it.c Interrupt handlers - + stm32f10x_it.h Interrupt handlers header file - + main.c Main program - + main.h Header for main.c - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation -boards and can be easily tailored to any other hardware. -To select the STMicroelectronics evaluation board used to run the example, uncomment -the corresponding line in platform_config.h file. - - + STM3210B-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08 - and PC.09 pins - - + STM3210E-EVAL - - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08 - and PF.09 pins - - -How to use it -============= -In order to make the program work, you must do the following : -- Create a project and setup all your toolchain's start-up files: - + RVMDK - - in the project option menu, select 'Target' window and enter 0x08002000 - as IROM start address - - in the project option menu, select 'Linker' window and enter 0x08002000 - as R/O base address - - + EWARM4 - - use "lnkarm_flash_offset.xcl" as linker file - - + EWARM5 - - use "stm32f10x_flash_offset.icf" as linker file - - + RIDE - - In the Application options -> script menu, set "Use Default Script File" - to "No" and use "stm32f10x_flash_offset.ld" as Script File. - This linker is configured for STM32 High-density devices. To use it with - Medium-density devices, this linker should be updated as follows: - - line39: RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K - - line40: FLASH (rx) : ORIGIN = 0x8002000, LENGTH = 128K-0x2000 - - line49: _estack = 0x20005000; - - + HiTOP - - copy the "link_offset" and "STM32F10x_offset.lsl" files under "Settings" - folder which is created by default by HiTOP. - - in project->settings->project->tool settings ->linker, - use "link_offset.lnk" as linker file. - This linker is configured for STM32 High-density devices. To use it with - Medium-density devices, this linker should be updated as follows: - - line2: #define __ROM_SIZE 128k - - line5: #define __RAM_SIZE 20k - -- Compile the directory content files and required Library files: - + stm32f10x_lib.c - + stm32f10x_systick.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_flash.c - -- In the main.c and linker files, the vector table is relocated at address 0x08002000. - You can modify this address depending on the requirement of your application. - -- Rebuild all files - -- Convert the program image to a binary file, *.bin, then you can download and - run it using the IAP or DFU application. - -NOTE: - - Medium-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 32 and 128 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_conf.h b/src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_conf.h deleted file mode 100755 index f421f9a..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_conf.h +++ /dev/null @@ -1,170 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -//#define _ADC -//#define _ADC1 -//#define _ADC2 -//#define _ADC3 - -/************************************* BKP ************************************/ -//#define _BKP - -/************************************* CAN ************************************/ -//#define _CAN - -/************************************* CRC ************************************/ -//#define _CRC - -/************************************* DAC ************************************/ -//#define _DAC - -/************************************* DBGMCU *********************************/ -//#define _DBGMCU - -/************************************* DMA ************************************/ -//#define _DMA -//#define _DMA1_Channel1 -//#define _DMA1_Channel2 -//#define _DMA1_Channel3 -//#define _DMA1_Channel4 -//#define _DMA1_Channel5 -//#define _DMA1_Channel6 -//#define _DMA1_Channel7 -//#define _DMA2_Channel1 -//#define _DMA2_Channel2 -//#define _DMA2_Channel3 -//#define _DMA2_Channel4 -//#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -//#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -//#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -//#define _GPIOA -//#define _GPIOB -#define _GPIOC -//#define _GPIOD -//#define _GPIOE -#define _GPIOF -//#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -//#define _I2C -//#define _I2C1 -//#define _I2C2 - -/************************************* IWDG ***********************************/ -//#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -//#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -//#define _RTC - -/************************************* SDIO ***********************************/ -//#define _SDIO - -/************************************* SPI ************************************/ -//#define _SPI -//#define _SPI1 -//#define _SPI2 -//#define _SPI3 - -/************************************* SysTick ********************************/ -#define _SysTick - -/************************************* TIM ************************************/ -//#define _TIM -//#define _TIM1 -//#define _TIM2 -//#define _TIM3 -//#define _TIM4 -//#define _TIM5 -//#define _TIM6 -//#define _TIM7 -//#define _TIM8 - -/************************************* USART **********************************/ -//#define _USART -//#define _USART1 -//#define _USART2 -//#define _USART3 -//#define _UART4 -//#define _UART5 - -/************************************* WWDG ***********************************/ -//#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_it.c b/src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_it.c deleted file mode 100755 index 3f1d5aa..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_it.c +++ /dev/null @@ -1,812 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "main.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ - TimingDelay_Decrement(); -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_it.h b/src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/NVIC/VectorTable_Relocation/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3