From a8aaabae4c1cc64a01d740a436336ca31c1f79ba Mon Sep 17 00:00:00 2001 From: iperry Date: Thu, 17 Dec 2009 02:46:08 +0000 Subject: removed extraneous files, stm32lib examples git-svn-id: https://leaflabs.googlecode.com/svn/trunk/library@70 749a229e-a60e-11de-b98f-4500b42dc123 --- .../examples/DAC/DualModeDMA_SineWave/jtag/flash | Bin 35556 -> 0 bytes .../DAC/DualModeDMA_SineWave/jtag/flash.cfg | 69 - .../DAC/DualModeDMA_SineWave/jtag/flash.script | 11 - .../DAC/DualModeDMA_SineWave/jtag/openocd.cfg | 60 - .../DAC/DualModeDMA_SineWave/jtag/target.ini | 93 - .../lib/STM32_128K_20K_FLASH.ld | 29 - .../DAC/DualModeDMA_SineWave/lib/STM32_COMMON.ld | 164 - .../DAC/DualModeDMA_SineWave/lib/STM32_SEC_EXT.ld | 181 -- .../DualModeDMA_SineWave/lib/STM32_SEC_FLASH.ld | 201 -- .../DAC/DualModeDMA_SineWave/lib/STM32_SEC_RAM.ld | 156 - .../DualModeDMA_SineWave/lib/STM32_SEC_RAMonly.ld | 157 - .../DualModeDMA_SineWave/lib/inc/cortexm3_macro.h | 53 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_adc.h | 300 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_bkp.h | 122 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_can.h | 263 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_crc.h | 37 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_dac.h | 167 - .../lib/inc/stm32f10x_dbgmcu.h | 55 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_dma.h | 297 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_exti.h | 107 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_flash.h | 208 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_fsmc.h | 355 --- .../DualModeDMA_SineWave/lib/inc/stm32f10x_gpio.h | 237 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_i2c.h | 289 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_iwdg.h | 69 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_lib.h | 124 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_map.h | 1187 -------- .../DualModeDMA_SineWave/lib/inc/stm32f10x_nvic.h | 287 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_pwr.h | 77 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_rcc.h | 288 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_rtc.h | 70 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_sdio.h | 337 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_spi.h | 292 -- .../lib/inc/stm32f10x_systick.h | 64 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_tim.h | 778 ----- .../DualModeDMA_SineWave/lib/inc/stm32f10x_type.h | 80 - .../DualModeDMA_SineWave/lib/inc/stm32f10x_usart.h | 256 -- .../DualModeDMA_SineWave/lib/inc/stm32f10x_wwdg.h | 54 - .../DualModeDMA_SineWave/lib/src/cortexm3_macro.s | 297 -- .../DualModeDMA_SineWave/lib/src/stm32f10x_adc.c | 1402 --------- .../DualModeDMA_SineWave/lib/src/stm32f10x_bkp.c | 272 -- .../DualModeDMA_SineWave/lib/src/stm32f10x_can.c | 907 ------ .../DualModeDMA_SineWave/lib/src/stm32f10x_crc.c | 114 - .../DualModeDMA_SineWave/lib/src/stm32f10x_dac.c | 389 --- .../lib/src/stm32f10x_dbgmcu.c | 97 - .../DualModeDMA_SineWave/lib/src/stm32f10x_dma.c | 678 ----- .../DualModeDMA_SineWave/lib/src/stm32f10x_exti.c | 219 -- .../DualModeDMA_SineWave/lib/src/stm32f10x_flash.c | 920 ------ .../DualModeDMA_SineWave/lib/src/stm32f10x_fsmc.c | 861 ------ .../DualModeDMA_SineWave/lib/src/stm32f10x_gpio.c | 580 ---- .../DualModeDMA_SineWave/lib/src/stm32f10x_i2c.c | 1237 -------- .../DualModeDMA_SineWave/lib/src/stm32f10x_iwdg.c | 148 - .../DualModeDMA_SineWave/lib/src/stm32f10x_lib.c | 303 -- .../DualModeDMA_SineWave/lib/src/stm32f10x_nvic.c | 751 ----- .../DualModeDMA_SineWave/lib/src/stm32f10x_pwr.c | 280 -- .../DualModeDMA_SineWave/lib/src/stm32f10x_rcc.c | 1104 ------- .../DualModeDMA_SineWave/lib/src/stm32f10x_rtc.c | 320 -- .../DualModeDMA_SineWave/lib/src/stm32f10x_sdio.c | 832 ----- .../DualModeDMA_SineWave/lib/src/stm32f10x_spi.c | 886 ------ .../lib/src/stm32f10x_systick.c | 181 -- .../DualModeDMA_SineWave/lib/src/stm32f10x_tim.c | 3220 -------------------- .../DualModeDMA_SineWave/lib/src/stm32f10x_usart.c | 989 ------ .../lib/src/stm32f10x_vector.c | 217 -- .../DualModeDMA_SineWave/lib/src/stm32f10x_wwdg.c | 190 -- .../DAC/DualModeDMA_SineWave/lib/version-ld.txt | 1 - .../DAC/DualModeDMA_SineWave/lib/version-lib.txt | 105 - .../examples/DAC/DualModeDMA_SineWave/main | Bin 4496 -> 0 bytes .../examples/DAC/DualModeDMA_SineWave/main.bin | 0 .../examples/DAC/DualModeDMA_SineWave/main.c | 204 -- .../examples/DAC/DualModeDMA_SineWave/main.elf | Bin 35556 -> 0 bytes .../examples/DAC/DualModeDMA_SineWave/main.elf.map | 675 ---- .../examples/DAC/DualModeDMA_SineWave/main.map | 406 --- .../examples/DAC/DualModeDMA_SineWave/mainBkup.c | 265 -- .../examples/DAC/DualModeDMA_SineWave/makefile | 85 - .../examples/DAC/DualModeDMA_SineWave/readme.txt | 69 - .../examples/DAC/DualModeDMA_SineWave/stm32.ld | 29 - .../DAC/DualModeDMA_SineWave/stm32f10x_conf.h | 169 - .../DAC/DualModeDMA_SineWave/stm32f10x_it.c | 810 ----- .../DAC/DualModeDMA_SineWave/stm32f10x_it.h | 100 - .../examples/DAC/OneChannelDMA_Escalator/main.c | 242 -- .../DAC/OneChannelDMA_Escalator/readme.txt | 68 - .../DAC/OneChannelDMA_Escalator/stm32f10x_conf.h | 169 - .../DAC/OneChannelDMA_Escalator/stm32f10x_it.c | 810 ----- .../DAC/OneChannelDMA_Escalator/stm32f10x_it.h | 100 - .../examples/DAC/OneChannel_NoiseWave/main.c | 210 -- .../examples/DAC/OneChannel_NoiseWave/readme.txt | 67 - .../DAC/OneChannel_NoiseWave/stm32f10x_conf.h | 169 - .../DAC/OneChannel_NoiseWave/stm32f10x_it.c | 810 ----- .../DAC/OneChannel_NoiseWave/stm32f10x_it.h | 100 - .../examples/DAC/TwoChannels_TriangleWave/main.c | 232 -- .../DAC/TwoChannels_TriangleWave/readme.txt | 69 - .../DAC/TwoChannels_TriangleWave/stm32f10x_conf.h | 170 -- .../DAC/TwoChannels_TriangleWave/stm32f10x_it.c | 810 ----- .../DAC/TwoChannels_TriangleWave/stm32f10x_it.h | 100 - 94 files changed, 32012 deletions(-) delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash.cfg delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash.script delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/openocd.cfg delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/target.ini delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_128K_20K_FLASH.ld delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_COMMON.ld delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_EXT.ld delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_FLASH.ld delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_RAM.ld delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_RAMonly.ld delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/cortexm3_macro.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_adc.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_bkp.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_can.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_crc.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dac.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dbgmcu.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dma.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_exti.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_flash.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_fsmc.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_gpio.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_i2c.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_iwdg.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_lib.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_map.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_nvic.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_pwr.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_rcc.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_rtc.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_sdio.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_spi.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_systick.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_tim.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_type.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_usart.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_wwdg.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/cortexm3_macro.s delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_adc.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_bkp.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_can.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_crc.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dac.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dbgmcu.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dma.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_exti.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_flash.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_fsmc.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_gpio.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_i2c.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_iwdg.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_lib.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_nvic.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_pwr.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_rcc.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_rtc.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_sdio.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_spi.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_systick.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_tim.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_usart.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_vector.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_wwdg.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/version-ld.txt delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/version-lib.txt delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/main delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.bin delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.elf delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.elf.map delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.map delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/mainBkup.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/makefile delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/readme.txt delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32.ld delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_it.h delete mode 100755 src/stm32lib/examples/DAC/OneChannelDMA_Escalator/main.c delete mode 100755 src/stm32lib/examples/DAC/OneChannelDMA_Escalator/readme.txt delete mode 100755 src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.h delete mode 100755 src/stm32lib/examples/DAC/OneChannel_NoiseWave/main.c delete mode 100755 src/stm32lib/examples/DAC/OneChannel_NoiseWave/readme.txt delete mode 100755 src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_it.h delete mode 100755 src/stm32lib/examples/DAC/TwoChannels_TriangleWave/main.c delete mode 100755 src/stm32lib/examples/DAC/TwoChannels_TriangleWave/readme.txt delete mode 100755 src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_conf.h delete mode 100755 src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.c delete mode 100755 src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.h (limited to 'src/stm32lib/examples/DAC') diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash deleted file mode 100755 index b9de87a..0000000 Binary files a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash and /dev/null differ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash.cfg b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash.cfg deleted file mode 100755 index fd6a90b..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash.cfg +++ /dev/null @@ -1,69 +0,0 @@ -# Open On-Chip Debugger -# (c) 2005 by Dominic Rath -# (snapshot r247 from SVN tree + giveio, no official release, compiled my mifi) -# -# --help | -h display this help -# --file | -f use configuration file -# --debug | -d set debug level <0-3> -# --log_output | -l redirect log output to file - - -# daemon configuration - -# logging -#debug 3 - -# default ports -telnet_port 4444 -gdb_port 3333 - -daemon_startup reset - -#gdb_flash_program enable - - -# interface configuration - -interface ft2232 -ft2232_device_desc "Olimex OpenOCD JTAG A" -#ft2232_device_desc "Olimex OpenOCD JTAG TINY A" -ft2232_layout olimex-jtag -jtag_speed 10 - -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - -reset_config trst_and_srst - - -# scan chain configuration - -# jtag_device L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) -jtag_device 4 0x1 0xf 0xe -jtag_device 5 0x1 0x1 0x1e - - -# target configuration - -# target -# target cortex_m3 -#target cortex_m3 little reset_halt 0 -#target cortex_m3 little run_and_halt 0 -#target cortex_m3 little reset_init 0 (this causes scripted flash write_image to fail) -target cortex_m3 little run_and_init 0 - -# run_and_halt_time -run_and_halt_time 0 0 - -# working_area
-working_area 0 0x20000000 0x5000 nobackup - -# flash bank [options] -# flash bank stm32x 0 0 -flash bank stm32x 0x08000000 0x20000 0 0 0 - - -# script configuration - -# target_script -target_script 0 reset flash.script diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash.script b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash.script deleted file mode 100755 index 54eb165..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/flash.script +++ /dev/null @@ -1,11 +0,0 @@ -wait_halt -sleep 10 -#poll -#sleep 10 -stm32x mass_erase 0 -sleep 10 -flash write_image flash -sleep 10 -reset run -sleep 10 -shutdown diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/openocd.cfg b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/openocd.cfg deleted file mode 100755 index 34d57ff..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/openocd.cfg +++ /dev/null @@ -1,60 +0,0 @@ -# Open On-Chip Debugger -# (c) 2005 by Dominic Rath -# (snapshot r247 from SVN tree + giveio, no official release, compiled my mifi) -# -# --help | -h display this help -# --file | -f use configuration file -# --debug | -d set debug level <0-3> -# --log_output | -l redirect log output to file - - -# daemon configuration - -# logging -#debug 3 - -# default ports -telnet_port 4444 -gdb_port 3333 - -daemon_startup reset - -#gdb_flash_program enable - - -# interface configuration - -interface ft2232 -ft2232_device_desc "Olimex OpenOCD JTAG" -ft2232_layout olimex-jtag -ft2232_vid_pid 0x15ba 0x0003 - -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - -reset_config trst_and_srst - - -# scan chain configuration - -# jtag_device L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) -jtag_device 4 0x1 0xf 0xe -jtag_device 5 0x1 0x1 0x1e - - -# target configuration - -# target -# target cortex_m3 -target cortex_m3 little reset_halt 0 -#target cortex_m3 little run_and_halt 0 - -# run_and_halt_time -#run_and_halt_time 0 0 - -# working_area
-working_area 0 0x20000000 0x5000 nobackup - -# flash bank [options] -# flash bank stm32x 0 0 -flash bank stm32x 0x08000000 0x20000 0 0 0 diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/target.ini b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/target.ini deleted file mode 100755 index da18158..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/jtag/target.ini +++ /dev/null @@ -1,93 +0,0 @@ -# -# GDB init file for STM32x family -# - -set complaints 1 -set output-radix 16 -set input-radix 16 - -# GDB must be set to big endian mode first if needed. -#set endian little - -# add str9lib src to gdb search path -#dir /cygdrive/c/progra~1/anglia/idealist/examples/stm32/libstr32x/src -#dir C:/Progra~1/Anglia/IDEaliST/examples/stm32/libstm32x/src - -# change gdb prompt -set prompt (arm-gdb) - -# You will need to change this to reflect the address of your jtag interface. -#target remote localhost:2000 - -# The libremote daemon must be set to big endian before the -# executable is loaded. -#monitor endian little - -# Increase the packet size to improve download speed. -# to view current setting use: -# show remote memory-write-packet-size - -set remote memory-write-packet-size 1024 -set remote memory-write-packet-size fixed - -set remote memory-read-packet-size 1024 -set remote memory-read-packet-size fixed -set remote hardware-watchpoint-limit 6 -set remote hardware-breakpoint-limit 6 - -# Load the program executable (ram only) -#load - -# Set a breakpoint at main(). -#b main - -# Run to the breakpoint. -#c - -# -# GDB command helpers -# - -# -# reset and map 0 to internal ram -# - -define ramreset -reset -set *(int*)0xE000ED08 = 0x20000000 -echo Internal RAM set to address 0x0. -end - -# -# reset and map 0 to flash -# - -define flashreset -reset -thb main -echo Internal Flash set to address 0x0. -end - -# -# reset target -# - -define reset -monitor reset -end - -document ramreset -ramreset -Causes a target reset, remaps Internal RAM to address 0x0. -end - -document flashreset -flashreset -Causes a target reset, remaps Internal Flash to address 0x0. -A temporary breakpoint is set at start of function main -end - -document reset -reset -Causes a target reset. -end diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_128K_20K_FLASH.ld b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_128K_20K_FLASH.ld deleted file mode 100755 index 5e4ce87..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_128K_20K_FLASH.ld +++ /dev/null @@ -1,29 +0,0 @@ -/* -Linker script for STM32F10x -Copyright RAISONANCE 2007 (modified by Lanchon 1-Feb-2008) -You can use, copy and distribute this file freely, but without any waranty. -Configure memory sizes, end of stack and boot mode for your project here. -*/ - - -/* include the common STM32F10x sub-script */ -INCLUDE "STM32_COMMON.ld" - -/* Memory Spaces Definitions */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K /* also change _estack below */ - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K - FLASHB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB0 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB2 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB3 (rx) : ORIGIN = 0x00000000, LENGTH = 0 -} - -/* highest address of the user mode stack */ -_estack = 0x20005000; - -/* include the section management sub-script */ -/* (either "STM32_SEC_FLASH.ld" or "STM32_SEC_RAM.ld") */ -INCLUDE "STM32_SEC_FLASH.ld" diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_COMMON.ld b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_COMMON.ld deleted file mode 100755 index 6794c70..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_COMMON.ld +++ /dev/null @@ -1,164 +0,0 @@ -/* -Common part of the linker scripts for STR32 devices -Copyright RAISONANCE 2007 -You can use, modify and distribute thisfile freely, but without any waranty. -*/ - - -/* default stack sizes. - -These are used by the startup in order to allocate stacks for the different modes. -*/ - -__Stack_Size = 1024 ; - -PROVIDE ( _Stack_Size = __Stack_Size ) ; - -__Stack_Init = _estack - __Stack_Size ; - -/*"PROVIDE" allows to easily override these values from an object file or the commmand line.*/ -PROVIDE ( _Stack_Init = __Stack_Init ) ; - -/* -There will be a link error if there is not this amount of RAM free at the end. -*/ -_Minimum_Stack_Size = 0x100 ; - - - -/* -this sends all unreferenced IRQHandlers to reset -*/ - - -PROVIDE ( Undefined_Handler = 0 ) ; -PROVIDE ( SWI_Handler = 0 ) ; -PROVIDE ( IRQ_Handler = 0 ) ; -PROVIDE ( Prefetch_Handler = 0 ) ; -PROVIDE ( Abort_Handler = 0 ) ; -PROVIDE ( FIQ_Handler = 0 ) ; - -PROVIDE ( NMIException = 0 ) ; -PROVIDE ( HardFaultException = 0 ) ; -PROVIDE ( MemManageException = 0 ) ; -PROVIDE ( BusFaultException = 0 ) ; -PROVIDE ( UsageFaultException = 0 ) ; -PROVIDE ( SVCHandler = 0 ) ; -PROVIDE ( DebugMonitor = 0 ) ; -PROVIDE ( PendSVC = 0 ) ; -PROVIDE ( SysTickHandler = 0 ) ; -PROVIDE ( WWDG_IRQHandler = 0 ) ; -PROVIDE ( PVD_IRQHandler = 0 ) ; -PROVIDE ( TAMPER_IRQHandler = 0 ) ; -PROVIDE ( RTC_IRQHandler = 0 ) ; -PROVIDE ( FLASH_IRQHandler = 0 ) ; -PROVIDE ( RCC_IRQHandler = 0 ) ; -PROVIDE ( EXTI0_IRQHandler = 0 ) ; -PROVIDE ( EXTI1_IRQHandler = 0 ) ; -PROVIDE ( EXTI2_IRQHandler = 0 ) ; -PROVIDE ( EXTI3_IRQHandler = 0 ) ; -PROVIDE ( EXTI4_IRQHandler = 0 ) ; -PROVIDE ( DMAChannel1_IRQHandler = 0 ) ; -PROVIDE ( DMAChannel2_IRQHandler = 0 ) ; -PROVIDE ( DMAChannel3_IRQHandler = 0 ) ; -PROVIDE ( DMAChannel4_IRQHandler = 0 ) ; -PROVIDE ( DMAChannel5_IRQHandler = 0 ) ; -PROVIDE ( DMAChannel6_IRQHandler = 0 ) ; -PROVIDE ( DMAChannel7_IRQHandler = 0 ) ; -PROVIDE ( ADC_IRQHandler = 0 ) ; -PROVIDE ( USB_HP_CAN_TX_IRQHandler = 0 ) ; -PROVIDE ( USB_LP_CAN_RX0_IRQHandler = 0 ) ; -PROVIDE ( CAN_RX1_IRQHandler = 0 ) ; -PROVIDE ( CAN_SCE_IRQHandler = 0 ) ; -PROVIDE ( EXTI9_5_IRQHandler = 0 ) ; -PROVIDE ( TIM1_BRK_IRQHandler = 0 ) ; -PROVIDE ( TIM1_UP_IRQHandler = 0 ) ; -PROVIDE ( TIM1_TRG_COM_IRQHandler = 0 ) ; -PROVIDE ( TIM1_CC_IRQHandler = 0 ) ; -PROVIDE ( TIM2_IRQHandler = 0 ) ; -PROVIDE ( TIM3_IRQHandler = 0 ) ; -PROVIDE ( TIM4_IRQHandler = 0 ) ; -PROVIDE ( I2C1_EV_IRQHandler = 0 ) ; -PROVIDE ( I2C1_ER_IRQHandler = 0 ) ; -PROVIDE ( I2C2_EV_IRQHandler = 0 ) ; -PROVIDE ( I2C2_ER_IRQHandler = 0 ) ; -PROVIDE ( SPI1_IRQHandler = 0 ) ; -PROVIDE ( SPI2_IRQHandler = 0 ) ; -PROVIDE ( USART1_IRQHandler = 0 ) ; -PROVIDE ( USART2_IRQHandler = 0 ) ; -PROVIDE ( USART3_IRQHandler = 0 ) ; -PROVIDE ( EXTI15_10_IRQHandler = 0 ) ; -PROVIDE ( RTCAlarm_IRQHandler = 0 ) ; -PROVIDE ( USBWakeUp_IRQHandler = 0 ) ; - - - -/******************************************************************************/ -/* Peripheral memory map */ -/******************************************************************************/ -/*this allows to compile the ST lib in "non-debug" mode*/ - - -/* Peripheral and SRAM base address in the alias region */ -PERIPH_BB_BASE = 0x42000000; -SRAM_BB_BASE = 0x22000000; - -/* Peripheral and SRAM base address in the bit-band region */ -SRAM_BASE = 0x20000000; -PERIPH_BASE = 0x40000000; - -/* Flash registers base address */ -PROVIDE ( FLASH_BASE = 0x40022000); -/* Flash Option Bytes base address */ -PROVIDE ( OB_BASE = 0x1FFFF800); - -/* Peripheral memory map */ -APB1PERIPH_BASE = PERIPH_BASE ; -APB2PERIPH_BASE = (PERIPH_BASE + 0x10000) ; -AHBPERIPH_BASE = (PERIPH_BASE + 0x20000) ; - -PROVIDE ( TIM2 = (APB1PERIPH_BASE + 0x0000) ) ; -PROVIDE ( TIM3 = (APB1PERIPH_BASE + 0x0400) ) ; -PROVIDE ( TIM4 = (APB1PERIPH_BASE + 0x0800) ) ; -PROVIDE ( RTC = (APB1PERIPH_BASE + 0x2800) ) ; -PROVIDE ( WWDG = (APB1PERIPH_BASE + 0x2C00) ) ; -PROVIDE ( IWDG = (APB1PERIPH_BASE + 0x3000) ) ; -PROVIDE ( SPI2 = (APB1PERIPH_BASE + 0x3800) ) ; -PROVIDE ( USART2 = (APB1PERIPH_BASE + 0x4400) ) ; -PROVIDE ( USART3 = (APB1PERIPH_BASE + 0x4800) ) ; -PROVIDE ( I2C1 = (APB1PERIPH_BASE + 0x5400) ) ; -PROVIDE ( I2C2 = (APB1PERIPH_BASE + 0x5800) ) ; -PROVIDE ( CAN = (APB1PERIPH_BASE + 0x6400) ) ; -PROVIDE ( BKP = (APB1PERIPH_BASE + 0x6C00) ) ; -PROVIDE ( PWR = (APB1PERIPH_BASE + 0x7000) ) ; - -PROVIDE ( AFIO = (APB2PERIPH_BASE + 0x0000) ) ; -PROVIDE ( EXTI = (APB2PERIPH_BASE + 0x0400) ) ; -PROVIDE ( GPIOA = (APB2PERIPH_BASE + 0x0800) ) ; -PROVIDE ( GPIOB = (APB2PERIPH_BASE + 0x0C00) ) ; -PROVIDE ( GPIOC = (APB2PERIPH_BASE + 0x1000) ) ; -PROVIDE ( GPIOD = (APB2PERIPH_BASE + 0x1400) ) ; -PROVIDE ( GPIOE = (APB2PERIPH_BASE + 0x1800) ) ; -PROVIDE ( ADC1 = (APB2PERIPH_BASE + 0x2400) ) ; -PROVIDE ( ADC2 = (APB2PERIPH_BASE + 0x2800) ) ; -PROVIDE ( TIM1 = (APB2PERIPH_BASE + 0x2C00) ) ; -PROVIDE ( SPI1 = (APB2PERIPH_BASE + 0x3000) ) ; -PROVIDE ( USART1 = (APB2PERIPH_BASE + 0x3800) ) ; - -PROVIDE ( DMA = (AHBPERIPH_BASE + 0x0000) ) ; -PROVIDE ( DMA_Channel1 = (AHBPERIPH_BASE + 0x0008) ) ; -PROVIDE ( DMA_Channel2 = (AHBPERIPH_BASE + 0x001C) ) ; -PROVIDE ( DMA_Channel3 = (AHBPERIPH_BASE + 0x0030) ) ; -PROVIDE ( DMA_Channel4 = (AHBPERIPH_BASE + 0x0044) ) ; -PROVIDE ( DMA_Channel5 = (AHBPERIPH_BASE + 0x0058) ) ; -PROVIDE ( DMA_Channel6 = (AHBPERIPH_BASE + 0x006C) ) ; -PROVIDE ( DMA_Channel7 = (AHBPERIPH_BASE + 0x0080) ) ; -PROVIDE ( RCC = (AHBPERIPH_BASE + 0x1000) ) ; - -/* System Control Space memory map */ -SCS_BASE = 0xE000E000; - -PROVIDE ( SysTick = (SCS_BASE + 0x0010) ) ; -PROVIDE ( NVIC = (SCS_BASE + 0x0100) ) ; -PROVIDE ( SCB = (SCS_BASE + 0x0D00) ) ; - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_EXT.ld b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_EXT.ld deleted file mode 100755 index 3623d06..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_EXT.ld +++ /dev/null @@ -1,181 +0,0 @@ -/* -Common part of the linker scripts for STR71x devices in EXT mode -(that is, the EXT is seen at 0) -Copyright RAISONANCE 2005 -You can use, modify and distribute thisfile freely, but without any waranty. -*/ - - - -/* Sections Definitions */ - -SECTIONS -{ - /* the program code is stored in the .text section */ - .text : - { - . = ALIGN(4); - - *crt0*.o (.text) /* Startup code */ - *startup.o (.text) /* Startup code */ - *(.text) /* remaining code */ - *(.rodata) /* read-only data (constants) */ - *(.rodata*) - *(.glue_7) - *(.glue_7t) - - . = ALIGN(4); - _etext = .; - /* This is used by the startup in order to initialize the .data secion */ - _sidata = _etext ; - } >EXTMEMB0 - - - - /* This is the initialized data section - The program executes knowing that the data is in the RAM - but the loader puts the initial values in the EXTMEM. - It is one task of the startup to copy the initial values from EXTMEMB0 to RAM. */ - .data : AT ( _etext ) - { - . = ALIGN(4); - /* This is used by the startup in order to initialize the .data secion */ - _sdata = . ; - - *(.data) - - . = ALIGN(4); - /* This is used by the startup in order to initialize the .data secion */ - _edata = . ; - } >RAM - - - - /* This is the uninitialized data section */ - .bss : - { - . = ALIGN(4); - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; - - *(.bss) - *(COMMON) - . = ALIGN(4); - /* This is used by the startup in order to initialize the .bss secion */ - _ebss = . ; - - } >RAM - - PROVIDE ( end = _ebss ); - PROVIDE ( _end = _ebss ); - - /* This is the user stack section - This is just to check that there is enough RAM left for the User mode stack - It should generate an error if it's full. - */ - ._usrstack : - { - . = ALIGN(4); - _susrstack = . ; - - . = . + _Minimum_Stack_Size ; - - _eusrstack = ALIGN(4) ; - . = .; - } >RAM - - - /* this is the FLASH Bank0 */ - /* the C or assembly source must explicitly place the code or data there - using the "section" attribute */ - .fb0text : - { - *(.fb0text) /* remaining code */ - *(.fb0rodata) /* read-only data (constants) */ - *(.fb0rodata*) - } >FLASH - - /* this is the FLASH Bank1 */ - /* the C or assembly source must explicitly place the code or data there - using the "section" attribute */ - .fb1text : - { - *(.fb1text) /* remaining code */ - *(.fb1rodata) /* read-only data (constants) */ - *(.fb1rodata*) - } >FLASHB1 - - /* EXTMEM Bank1 */ - .eb1text : - { - *(.b1text) /* remaining code */ - *(.b1rodata) /* read-only data (constants) */ - *(.b1rodata*) - } >EXTMEMB1 - - /* EXTMEM Bank2 */ - .eb2text : - { - *(.b2text) /* remaining code */ - *(.b2rodata) /* read-only data (constants) */ - *(.b2rodata*) - } >EXTMEMB2 - - /* EXTMEM Bank0 */ - .eb3text : - { - *(.b3text) /* remaining code */ - *(.b3rodata) /* read-only data (constants) */ - *(.b3rodata*) - } >EXTMEMB3 - - __exidx_start = .; - __exidx_end = .; - - /* after that it's only debugging information. */ - - /* remove the debugging information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} - - - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_FLASH.ld b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_FLASH.ld deleted file mode 100755 index cd8c4fa..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_FLASH.ld +++ /dev/null @@ -1,201 +0,0 @@ -/* -Common part of the linker scripts for STR71x devices in FLASH mode -(that is, the FLASH is seen at 0) -Copyright RAISONANCE 2005 -You can use, modify and distribute thisfile freely, but without any waranty. -*/ - - - -/* Sections Definitions */ - -SECTIONS -{ - /* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* for some STRx devices, the beginning of the startup code is stored in the .flashtext section, which goes to FLASH */ - .flashtext : - { - . = ALIGN(4); - *(.flashtext) /* Startup code */ - . = ALIGN(4); - } >FLASH - - - /* the program code is stored in the .text section, which goes to Flash */ - .text : - { - . = ALIGN(4); - - *(.text) /* remaining code */ - *(.text.*) /* remaining code */ - *(.rodata) /* read-only data (constants) */ - *(.rodata*) - *(.glue_7) - *(.glue_7t) - - . = ALIGN(4); - _etext = .; - /* This is used by the startup in order to initialize the .data secion */ - _sidata = _etext; - } >FLASH - - - - /* This is the initialized data section - The program executes knowing that the data is in the RAM - but the loader puts the initial values in the FLASH (inidata). - It is one task of the startup to copy the initial values from FLASH to RAM. */ - .data : AT ( _sidata ) - { - . = ALIGN(4); - /* This is used by the startup in order to initialize the .data secion */ - _sdata = . ; - - *(.data) - *(.data.*) - - . = ALIGN(4); - /* This is used by the startup in order to initialize the .data secion */ - _edata = . ; - } >RAM - - - - /* This is the uninitialized data section */ - .bss : - { - . = ALIGN(4); - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; - - *(.bss) - *(COMMON) - - . = ALIGN(4); - /* This is used by the startup in order to initialize the .bss secion */ - _ebss = . ; - } >RAM - - PROVIDE ( end = _ebss ); - PROVIDE ( _end = _ebss ); - - /* This is the user stack section - This is just to check that there is enough RAM left for the User mode stack - It should generate an error if it's full. - */ - ._usrstack : - { - . = ALIGN(4); - _susrstack = . ; - - . = . + _Minimum_Stack_Size ; - - . = ALIGN(4); - _eusrstack = . ; - } >RAM - - - - /* this is the FLASH Bank1 */ - /* the C or assembly source must explicitly place the code or data there - using the "section" attribute */ - .b1text : - { - *(.b1text) /* remaining code */ - *(.b1rodata) /* read-only data (constants) */ - *(.b1rodata*) - } >FLASHB1 - - /* this is the EXTMEM */ - /* the C or assembly source must explicitly place the code or data there - using the "section" attribute */ - - /* EXTMEM Bank0 */ - .eb0text : - { - *(.eb0text) /* remaining code */ - *(.eb0rodata) /* read-only data (constants) */ - *(.eb0rodata*) - } >EXTMEMB0 - - /* EXTMEM Bank1 */ - .eb1text : - { - *(.eb1text) /* remaining code */ - *(.eb1rodata) /* read-only data (constants) */ - *(.eb1rodata*) - } >EXTMEMB1 - - /* EXTMEM Bank2 */ - .eb2text : - { - *(.eb2text) /* remaining code */ - *(.eb2rodata) /* read-only data (constants) */ - *(.eb2rodata*) - } >EXTMEMB2 - - /* EXTMEM Bank0 */ - .eb3text : - { - *(.eb3text) /* remaining code */ - *(.eb3rodata) /* read-only data (constants) */ - *(.eb3rodata*) - } >EXTMEMB3 - - __exidx_start = .; - __exidx_end = .; - - /* after that it's only debugging information. */ - - /* remove the debugging information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} - - - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_RAM.ld b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_RAM.ld deleted file mode 100755 index 4b44bb2..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_RAM.ld +++ /dev/null @@ -1,156 +0,0 @@ -/* -Common part of the linker scripts for STR71x devices in RAM mode -(that is, the RAM is seen at 0 and we assume that the loader initializes it) -Copyright RAISONANCE 2005 -You can use, modify and distribute thisfile freely, but without any waranty. -*/ - -/* Sections Definitions */ - -SECTIONS -{ - - /* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to start of RAM */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >RAM - - /* for some STRx devices, the beginning of the startup code is stored in the .flashtext section, which goes to FLASH */ - .flashtext : - { - . = ALIGN(4); - *(.flashtext) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* the program code is stored in the .text section, which goes to RAM */ - .text : - { - . = ALIGN(4); - - *(.text ) /* remaining code */ - *(.glue_7) - *(.glue_7t) - - . = ALIGN(4); - } >RAM - - /* This is the uninitialized data section. */ - .bss : - { - . = ALIGN(4); - _sbss = .; - - *(.bss) - *(COMMON) - - . = ALIGN(4); - _ebss = . ; - _etext = _ebss ; - - } >RAM - - - /* read-only data (constants) */ - .rodata : - { - *(.rodata) - *(.rodata*) - . = ALIGN(4); - } > FLASH - - - .idata : - { - _sidata = . ; - } > FLASH - - - /* This is the initialized data section. */ - .data : AT ( _sidata ) - { - . = ALIGN(4); - _sdata = .; - *(.data) - . = ALIGN(4); - _edata = . ; - } >RAM - - - - PROVIDE ( end = _edata ); - PROVIDE ( _end = _edata ); - - /* This is the user stack section - This is just to check that there is enough RAM left for the User mode stack - It should generate an error if it's full. - */ - ._usrstack : - { - . = ALIGN(4); - _susrstack = . ; - - . = . + _Minimum_Stack_Size ; - - . = ALIGN(4); - _eusrstack = . ; - } >RAM - - - __exidx_start = .; - __exidx_end = .; - - /* after that it's only debugging information. */ - - /* remove the debugging information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ -/* .debug_info 0 : { * ( EXCLUDE_FILE ( *libc.a *libm.a ) .debug_info .gnu.linkonce.wi.*) }*/ - .debug_info 0 : { * ( .debug_info .gnu.linkonce.wi.*) } -/* .debug_abbrev 0 : { *(EXCLUDE_FILE ( *libc.a *libm.a ) .debug_abbrev) }*/ - .debug_abbrev 0 : { *(.debug_abbrev) } -/* .debug_line 0 : { *(EXCLUDE_FILE ( *libc.a *libm.a ) .debug_line) }*/ - .debug_line 0 : { *( .debug_line) } - /* (*(EXCLUDE_FILE (*crtend.o *otherfile.o) .ctors)) */ - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} - - - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_RAMonly.ld b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_RAMonly.ld deleted file mode 100755 index fa90799..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/STM32_SEC_RAMonly.ld +++ /dev/null @@ -1,157 +0,0 @@ -/* -Common part of the linker scripts for STR71x devices in RAM mode -(that is, the RAM is seen at 0 and we assume that the loader initializes it) -Copyright RAISONANCE 2005 -You can use, modify and distribute thisfile freely, but without any waranty. -*/ - -/* Sections Definitions */ - -SECTIONS -{ - - /* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to start of RAM */ - .isr_vector : - { - . = ALIGN(4); - *(.isr_vector) /* Startup code */ - . = ALIGN(4); - } >RAM - - - /* the beginning of the startup code is stored in the .flashtext section */ - .flashtext : - { - . = ALIGN(4); - - *crt0*.o (.flashtext) /* Startup code */ - *startup.o (.flashtext) /* Startup code */ - *(.flashtext) /* Startup code */ - . = ALIGN(4); - } >RAM - - /* the program code is stored in the .text section */ - .text : - { - . = ALIGN(4); - - *crt0*.o (.text) /* Startup code */ - *startup.o (.text) /* Startup code */ - *(.text ) /* remaining code */ - *(.glue_7) - *(.glue_7t) - - . = ALIGN(4); - } >RAM - - /* This is the uninitialized data section. */ - .bss : - { - . = ALIGN(4); - _sbss = .; - - *(.bss) - *(COMMON) - - . = ALIGN(4); - _ebss = . ; - _etext = _ebss ; - - } >RAM - - - /* read-only data (constants) */ - .rodata : - { - *(.rodata) - *(.rodata*) - . = ALIGN(4); - } > RAM - - - /* This is the initialized data section. */ - .data : - { - . = ALIGN(4); - _sidata = . ; /*this is useless but allows the same startup as for the other modes to be used.*/ - _sdata = .; - *(.data) - . = ALIGN(4); - _edata = . ; - } >RAM - - - - PROVIDE ( end = _edata ); - PROVIDE ( _end = _edata ); - - /* This is the user stack section - This is just to check that there is enough RAM left for the User mode stack - It should generate an error if it's full. - */ - ._usrstack : - { - . = ALIGN(4); - _susrstack = . ; - - . = . + _Minimum_Stack_Size ; - - . = ALIGN(4); - _eusrstack = . ; - } >RAM - - - __exidx_start = .; - __exidx_end = .; - - /* after that it's only debugging information. */ - - /* remove the debugging information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ -/* .debug_info 0 : { * ( EXCLUDE_FILE ( *libc.a *libm.a ) .debug_info .gnu.linkonce.wi.*) }*/ - .debug_info 0 : { * ( .debug_info .gnu.linkonce.wi.*) } -/* .debug_abbrev 0 : { *(EXCLUDE_FILE ( *libc.a *libm.a ) .debug_abbrev) }*/ - .debug_abbrev 0 : { *(.debug_abbrev) } -/* .debug_line 0 : { *(EXCLUDE_FILE ( *libc.a *libm.a ) .debug_line) }*/ - .debug_line 0 : { *( .debug_line) } - /* (*(EXCLUDE_FILE (*crtend.o *otherfile.o) .ctors)) */ - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} - - - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/cortexm3_macro.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/cortexm3_macro.h deleted file mode 100755 index 19e8f7a..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/cortexm3_macro.h +++ /dev/null @@ -1,53 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : cortexm3_macro.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Header file for cortexm3_macro.s. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __CORTEXM3_MACRO_H -#define __CORTEXM3_MACRO_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void __WFI(void); -void __WFE(void); -void __SEV(void); -void __ISB(void); -void __DSB(void); -void __DMB(void); -void __SVC(void); -u32 __MRS_CONTROL(void); -void __MSR_CONTROL(u32 Control); -u32 __MRS_PSP(void); -void __MSR_PSP(u32 TopOfProcessStack); -u32 __MRS_MSP(void); -void __MSR_MSP(u32 TopOfMainStack); -void __RESETPRIMASK(void); -void __SETPRIMASK(void); -u32 __READ_PRIMASK(void); -void __RESETFAULTMASK(void); -void __SETFAULTMASK(void); -u32 __READ_FAULTMASK(void); -void __BASEPRICONFIG(u32 NewPriority); -u32 __GetBASEPRI(void); -u16 __REV_HalfWord(u16 Data); -u32 __REV_Word(u32 Data); - -#endif /* __CORTEXM3_MACRO_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_adc.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_adc.h deleted file mode 100755 index c14f4fd..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_adc.h +++ /dev/null @@ -1,300 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_adc.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* ADC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_ADC_H -#define __STM32F10x_ADC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* ADC Init structure definition */ -typedef struct -{ - u32 ADC_Mode; - FunctionalState ADC_ScanConvMode; - FunctionalState ADC_ContinuousConvMode; - u32 ADC_ExternalTrigConv; - u32 ADC_DataAlign; - u8 ADC_NbrOfChannel; -}ADC_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -#define IS_ADC_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == ADC1_BASE) || \ - ((*(u32*)&(PERIPH)) == ADC2_BASE) || \ - ((*(u32*)&(PERIPH)) == ADC3_BASE)) - -#define IS_ADC_DMA_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == ADC1_BASE) || \ - ((*(u32*)&(PERIPH)) == ADC3_BASE)) - -/* ADC dual mode -------------------------------------------------------------*/ -#define ADC_Mode_Independent ((u32)0x00000000) -#define ADC_Mode_RegInjecSimult ((u32)0x00010000) -#define ADC_Mode_RegSimult_AlterTrig ((u32)0x00020000) -#define ADC_Mode_InjecSimult_FastInterl ((u32)0x00030000) -#define ADC_Mode_InjecSimult_SlowInterl ((u32)0x00040000) -#define ADC_Mode_InjecSimult ((u32)0x00050000) -#define ADC_Mode_RegSimult ((u32)0x00060000) -#define ADC_Mode_FastInterl ((u32)0x00070000) -#define ADC_Mode_SlowInterl ((u32)0x00080000) -#define ADC_Mode_AlterTrig ((u32)0x00090000) - -#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \ - ((MODE) == ADC_Mode_RegInjecSimult) || \ - ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \ - ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \ - ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \ - ((MODE) == ADC_Mode_InjecSimult) || \ - ((MODE) == ADC_Mode_RegSimult) || \ - ((MODE) == ADC_Mode_FastInterl) || \ - ((MODE) == ADC_Mode_SlowInterl) || \ - ((MODE) == ADC_Mode_AlterTrig)) - -/* ADC extrenal trigger sources for regular channels conversion --------------*/ -/* for ADC1 and ADC2 */ -#define ADC_ExternalTrigConv_T1_CC1 ((u32)0x00000000) -#define ADC_ExternalTrigConv_T1_CC2 ((u32)0x00020000) -#define ADC_ExternalTrigConv_T2_CC2 ((u32)0x00060000) -#define ADC_ExternalTrigConv_T3_TRGO ((u32)0x00080000) -#define ADC_ExternalTrigConv_T4_CC4 ((u32)0x000A0000) -#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((u32)0x000C0000) -/* for ADC1, ADC2 and ADC3 */ -#define ADC_ExternalTrigConv_T1_CC3 ((u32)0x00040000) -#define ADC_ExternalTrigConv_None ((u32)0x000E0000) -/* for ADC3 */ -#define ADC_ExternalTrigConv_T3_CC1 ((u32)0x00000000) -#define ADC_ExternalTrigConv_T2_CC3 ((u32)0x00020000) -#define ADC_ExternalTrigConv_T8_CC1 ((u32)0x00060000) -#define ADC_ExternalTrigConv_T8_TRGO ((u32)0x00080000) -#define ADC_ExternalTrigConv_T5_CC1 ((u32)0x000A0000) -#define ADC_ExternalTrigConv_T5_CC3 ((u32)0x000C0000) - -#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ - ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_None) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3)) - -/* ADC data align ------------------------------------------------------------*/ -#define ADC_DataAlign_Right ((u32)0x00000000) -#define ADC_DataAlign_Left ((u32)0x00000800) - -#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ - ((ALIGN) == ADC_DataAlign_Left)) - -/* ADC channels --------------------------------------------------------------*/ -#define ADC_Channel_0 ((u8)0x00) -#define ADC_Channel_1 ((u8)0x01) -#define ADC_Channel_2 ((u8)0x02) -#define ADC_Channel_3 ((u8)0x03) -#define ADC_Channel_4 ((u8)0x04) -#define ADC_Channel_5 ((u8)0x05) -#define ADC_Channel_6 ((u8)0x06) -#define ADC_Channel_7 ((u8)0x07) -#define ADC_Channel_8 ((u8)0x08) -#define ADC_Channel_9 ((u8)0x09) -#define ADC_Channel_10 ((u8)0x0A) -#define ADC_Channel_11 ((u8)0x0B) -#define ADC_Channel_12 ((u8)0x0C) -#define ADC_Channel_13 ((u8)0x0D) -#define ADC_Channel_14 ((u8)0x0E) -#define ADC_Channel_15 ((u8)0x0F) -#define ADC_Channel_16 ((u8)0x10) -#define ADC_Channel_17 ((u8)0x11) - -#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \ - ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \ - ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \ - ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \ - ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \ - ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \ - ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \ - ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \ - ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17)) - -/* ADC sampling times --------------------------------------------------------*/ -#define ADC_SampleTime_1Cycles5 ((u8)0x00) -#define ADC_SampleTime_7Cycles5 ((u8)0x01) -#define ADC_SampleTime_13Cycles5 ((u8)0x02) -#define ADC_SampleTime_28Cycles5 ((u8)0x03) -#define ADC_SampleTime_41Cycles5 ((u8)0x04) -#define ADC_SampleTime_55Cycles5 ((u8)0x05) -#define ADC_SampleTime_71Cycles5 ((u8)0x06) -#define ADC_SampleTime_239Cycles5 ((u8)0x07) - -#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \ - ((TIME) == ADC_SampleTime_7Cycles5) || \ - ((TIME) == ADC_SampleTime_13Cycles5) || \ - ((TIME) == ADC_SampleTime_28Cycles5) || \ - ((TIME) == ADC_SampleTime_41Cycles5) || \ - ((TIME) == ADC_SampleTime_55Cycles5) || \ - ((TIME) == ADC_SampleTime_71Cycles5) || \ - ((TIME) == ADC_SampleTime_239Cycles5)) - -/* ADC extrenal trigger sources for injected channels conversion -------------*/ -/* For ADC1 and ADC2 */ -#define ADC_ExternalTrigInjecConv_T2_TRGO ((u32)0x00002000) -#define ADC_ExternalTrigInjecConv_T2_CC1 ((u32)0x00003000) -#define ADC_ExternalTrigInjecConv_T3_CC4 ((u32)0x00004000) -#define ADC_ExternalTrigInjecConv_T4_TRGO ((u32)0x00005000) -#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((u32)0x00006000) -/* For ADC1, ADC2 and ADC3 */ -#define ADC_ExternalTrigInjecConv_T1_TRGO ((u32)0x00000000) -#define ADC_ExternalTrigInjecConv_T1_CC4 ((u32)0x00001000) -#define ADC_ExternalTrigInjecConv_None ((u32)0x00007000) -/* For ADC3 */ -#define ADC_ExternalTrigInjecConv_T4_CC3 ((u32)0x00002000) -#define ADC_ExternalTrigInjecConv_T8_CC2 ((u32)0x00003000) -#define ADC_ExternalTrigInjecConv_T8_CC4 ((u32)0x00004000) -#define ADC_ExternalTrigInjecConv_T5_TRGO ((u32)0x00005000) -#define ADC_ExternalTrigInjecConv_T5_CC4 ((u32)0x00006000) - -#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4)) - -/* ADC injected channel selection --------------------------------------------*/ -#define ADC_InjectedChannel_1 ((u8)0x14) -#define ADC_InjectedChannel_2 ((u8)0x18) -#define ADC_InjectedChannel_3 ((u8)0x1C) -#define ADC_InjectedChannel_4 ((u8)0x20) - -#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ - ((CHANNEL) == ADC_InjectedChannel_2) || \ - ((CHANNEL) == ADC_InjectedChannel_3) || \ - ((CHANNEL) == ADC_InjectedChannel_4)) - -/* ADC analog watchdog selection ---------------------------------------------*/ -#define ADC_AnalogWatchdog_SingleRegEnable ((u32)0x00800200) -#define ADC_AnalogWatchdog_SingleInjecEnable ((u32)0x00400200) -#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((u32)0x00C00200) -#define ADC_AnalogWatchdog_AllRegEnable ((u32)0x00800000) -#define ADC_AnalogWatchdog_AllInjecEnable ((u32)0x00400000) -#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((u32)0x00C00000) -#define ADC_AnalogWatchdog_None ((u32)0x00000000) - -#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_None)) - -/* ADC interrupts definition -------------------------------------------------*/ -#define ADC_IT_EOC ((u16)0x0220) -#define ADC_IT_AWD ((u16)0x0140) -#define ADC_IT_JEOC ((u16)0x0480) - -#define IS_ADC_IT(IT) ((((IT) & (u16)0xF81F) == 0x00) && ((IT) != 0x00)) -#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \ - ((IT) == ADC_IT_JEOC)) - -/* ADC flags definition ------------------------------------------------------*/ -#define ADC_FLAG_AWD ((u8)0x01) -#define ADC_FLAG_EOC ((u8)0x02) -#define ADC_FLAG_JEOC ((u8)0x04) -#define ADC_FLAG_JSTRT ((u8)0x08) -#define ADC_FLAG_STRT ((u8)0x10) - -#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (u8)0xE0) == 0x00) && ((FLAG) != 0x00)) -#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \ - ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \ - ((FLAG) == ADC_FLAG_STRT)) - -/* ADC thresholds ------------------------------------------------------------*/ -#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) - -/* ADC injected offset -------------------------------------------------------*/ -#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) - -/* ADC injected length -------------------------------------------------------*/ -#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) - -/* ADC injected rank ---------------------------------------------------------*/ -#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) - -/* ADC regular length --------------------------------------------------------*/ -#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10)) - -/* ADC regular rank ----------------------------------------------------------*/ -#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10)) - -/* ADC regular discontinuous mode number -------------------------------------*/ -#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void ADC_DeInit(ADC_TypeDef* ADCx); -void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); -void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); -void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_ITConfig(ADC_TypeDef* ADCx, u16 ADC_IT, FunctionalState NewState); -void ADC_ResetCalibration(ADC_TypeDef* ADCx); -FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx); -void ADC_StartCalibration(ADC_TypeDef* ADCx); -FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx); -void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); -void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, u8 Number); -void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime); -void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -u16 ADC_GetConversionValue(ADC_TypeDef* ADCx); -u32 ADC_GetDualModeConversionValue(void); -void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, u32 ADC_ExternalTrigInjecConv); -void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); -void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime); -void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, u8 Length); -void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel, u16 Offset); -u16 ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel); -void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, u32 ADC_AnalogWatchdog); -void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, u16 HighThreshold, u16 LowThreshold); -void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel); -void ADC_TempSensorVrefintCmd(FunctionalState NewState); -FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, u8 ADC_FLAG); -void ADC_ClearFlag(ADC_TypeDef* ADCx, u8 ADC_FLAG); -ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, u16 ADC_IT); -void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, u16 ADC_IT); - -#endif /*__STM32F10x_ADC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_bkp.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_bkp.h deleted file mode 100755 index 3b10ff7..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_bkp.h +++ /dev/null @@ -1,122 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_bkp.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* BKP firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_BKP_H -#define __STM32F10x_BKP_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Tamper Pin active level */ -#define BKP_TamperPinLevel_High ((u16)0x0000) -#define BKP_TamperPinLevel_Low ((u16)0x0001) - -#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \ - ((LEVEL) == BKP_TamperPinLevel_Low)) - -/* RTC output source to output on the Tamper pin */ -#define BKP_RTCOutputSource_None ((u16)0x0000) -#define BKP_RTCOutputSource_CalibClock ((u16)0x0080) -#define BKP_RTCOutputSource_Alarm ((u16)0x0100) -#define BKP_RTCOutputSource_Second ((u16)0x0300) - -#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \ - ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \ - ((SOURCE) == BKP_RTCOutputSource_Alarm) || \ - ((SOURCE) == BKP_RTCOutputSource_Second)) - -/* Data Backup Register */ -#define BKP_DR1 ((u16)0x0004) -#define BKP_DR2 ((u16)0x0008) -#define BKP_DR3 ((u16)0x000C) -#define BKP_DR4 ((u16)0x0010) -#define BKP_DR5 ((u16)0x0014) -#define BKP_DR6 ((u16)0x0018) -#define BKP_DR7 ((u16)0x001C) -#define BKP_DR8 ((u16)0x0020) -#define BKP_DR9 ((u16)0x0024) -#define BKP_DR10 ((u16)0x0028) -#define BKP_DR11 ((u16)0x0040) -#define BKP_DR12 ((u16)0x0044) -#define BKP_DR13 ((u16)0x0048) -#define BKP_DR14 ((u16)0x004C) -#define BKP_DR15 ((u16)0x0050) -#define BKP_DR16 ((u16)0x0054) -#define BKP_DR17 ((u16)0x0058) -#define BKP_DR18 ((u16)0x005C) -#define BKP_DR19 ((u16)0x0060) -#define BKP_DR20 ((u16)0x0064) -#define BKP_DR21 ((u16)0x0068) -#define BKP_DR22 ((u16)0x006C) -#define BKP_DR23 ((u16)0x0070) -#define BKP_DR24 ((u16)0x0074) -#define BKP_DR25 ((u16)0x0078) -#define BKP_DR26 ((u16)0x007C) -#define BKP_DR27 ((u16)0x0080) -#define BKP_DR28 ((u16)0x0084) -#define BKP_DR29 ((u16)0x0088) -#define BKP_DR30 ((u16)0x008C) -#define BKP_DR31 ((u16)0x0090) -#define BKP_DR32 ((u16)0x0094) -#define BKP_DR33 ((u16)0x0098) -#define BKP_DR34 ((u16)0x009C) -#define BKP_DR35 ((u16)0x00A0) -#define BKP_DR36 ((u16)0x00A4) -#define BKP_DR37 ((u16)0x00A8) -#define BKP_DR38 ((u16)0x00AC) -#define BKP_DR39 ((u16)0x00B0) -#define BKP_DR40 ((u16)0x00B4) -#define BKP_DR41 ((u16)0x00B8) -#define BKP_DR42 ((u16)0x00BC) - -#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \ - ((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \ - ((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \ - ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \ - ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \ - ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \ - ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \ - ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \ - ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \ - ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \ - ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \ - ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \ - ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \ - ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42)) - -#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void BKP_DeInit(void); -void BKP_TamperPinLevelConfig(u16 BKP_TamperPinLevel); -void BKP_TamperPinCmd(FunctionalState NewState); -void BKP_ITConfig(FunctionalState NewState); -void BKP_RTCOutputConfig(u16 BKP_RTCOutputSource); -void BKP_SetRTCCalibrationValue(u8 CalibrationValue); -void BKP_WriteBackupRegister(u16 BKP_DR, u16 Data); -u16 BKP_ReadBackupRegister(u16 BKP_DR); -FlagStatus BKP_GetFlagStatus(void); -void BKP_ClearFlag(void); -ITStatus BKP_GetITStatus(void); -void BKP_ClearITPendingBit(void); - -#endif /* __STM32F10x_BKP_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_can.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_can.h deleted file mode 100755 index 5d3d40e..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_can.h +++ /dev/null @@ -1,263 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_can.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* CAN firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CAN_H -#define __STM32F10x_CAN_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* CAN init structure definition */ -typedef struct -{ - FunctionalState CAN_TTCM; - FunctionalState CAN_ABOM; - FunctionalState CAN_AWUM; - FunctionalState CAN_NART; - FunctionalState CAN_RFLM; - FunctionalState CAN_TXFP; - u8 CAN_Mode; - u8 CAN_SJW; - u8 CAN_BS1; - u8 CAN_BS2; - u16 CAN_Prescaler; -} CAN_InitTypeDef; - -/* CAN filter init structure definition */ -typedef struct -{ - u8 CAN_FilterNumber; - u8 CAN_FilterMode; - u8 CAN_FilterScale; - u16 CAN_FilterIdHigh; - u16 CAN_FilterIdLow; - u16 CAN_FilterMaskIdHigh; - u16 CAN_FilterMaskIdLow; - u16 CAN_FilterFIFOAssignment; - FunctionalState CAN_FilterActivation; -} CAN_FilterInitTypeDef; - -/* CAN Tx message structure definition */ -typedef struct -{ - u32 StdId; - u32 ExtId; - u8 IDE; - u8 RTR; - u8 DLC; - u8 Data[8]; -} CanTxMsg; - -/* CAN Rx message structure definition */ -typedef struct -{ - u32 StdId; - u32 ExtId; - u8 IDE; - u8 RTR; - u8 DLC; - u8 Data[8]; - u8 FMI; -} CanRxMsg; - -/* Exported constants --------------------------------------------------------*/ - -/* CAN sleep constants */ -#define CANINITFAILED ((u8)0x00) /* CAN initialization failed */ -#define CANINITOK ((u8)0x01) /* CAN initialization failed */ - -/* CAN operating mode */ -#define CAN_Mode_Normal ((u8)0x00) /* normal mode */ -#define CAN_Mode_LoopBack ((u8)0x01) /* loopback mode */ -#define CAN_Mode_Silent ((u8)0x02) /* silent mode */ -#define CAN_Mode_Silent_LoopBack ((u8)0x03) /* loopback combined with silent mode */ - -#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || ((MODE) == CAN_Mode_LoopBack)|| \ - ((MODE) == CAN_Mode_Silent) || ((MODE) == CAN_Mode_Silent_LoopBack)) - -/* CAN synchronisation jump width */ -#define CAN_SJW_1tq ((u8)0x00) /* 1 time quantum */ -#define CAN_SJW_2tq ((u8)0x01) /* 2 time quantum */ -#define CAN_SJW_3tq ((u8)0x02) /* 3 time quantum */ -#define CAN_SJW_4tq ((u8)0x03) /* 4 time quantum */ - -#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ - ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) - -/* time quantum in bit segment 1 */ -#define CAN_BS1_1tq ((u8)0x00) /* 1 time quantum */ -#define CAN_BS1_2tq ((u8)0x01) /* 2 time quantum */ -#define CAN_BS1_3tq ((u8)0x02) /* 3 time quantum */ -#define CAN_BS1_4tq ((u8)0x03) /* 4 time quantum */ -#define CAN_BS1_5tq ((u8)0x04) /* 5 time quantum */ -#define CAN_BS1_6tq ((u8)0x05) /* 6 time quantum */ -#define CAN_BS1_7tq ((u8)0x06) /* 7 time quantum */ -#define CAN_BS1_8tq ((u8)0x07) /* 8 time quantum */ -#define CAN_BS1_9tq ((u8)0x08) /* 9 time quantum */ -#define CAN_BS1_10tq ((u8)0x09) /* 10 time quantum */ -#define CAN_BS1_11tq ((u8)0x0A) /* 11 time quantum */ -#define CAN_BS1_12tq ((u8)0x0B) /* 12 time quantum */ -#define CAN_BS1_13tq ((u8)0x0C) /* 13 time quantum */ -#define CAN_BS1_14tq ((u8)0x0D) /* 14 time quantum */ -#define CAN_BS1_15tq ((u8)0x0E) /* 15 time quantum */ -#define CAN_BS1_16tq ((u8)0x0F) /* 16 time quantum */ - -#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) - -/* time quantum in bit segment 2 */ -#define CAN_BS2_1tq ((u8)0x00) /* 1 time quantum */ -#define CAN_BS2_2tq ((u8)0x01) /* 2 time quantum */ -#define CAN_BS2_3tq ((u8)0x02) /* 3 time quantum */ -#define CAN_BS2_4tq ((u8)0x03) /* 4 time quantum */ -#define CAN_BS2_5tq ((u8)0x04) /* 5 time quantum */ -#define CAN_BS2_6tq ((u8)0x05) /* 6 time quantum */ -#define CAN_BS2_7tq ((u8)0x06) /* 7 time quantum */ -#define CAN_BS2_8tq ((u8)0x07) /* 8 time quantum */ - -#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) - -/* CAN clock prescaler */ -#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) - -/* CAN filter number */ -#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13) - -/* CAN filter mode */ -#define CAN_FilterMode_IdMask ((u8)0x00) /* id/mask mode */ -#define CAN_FilterMode_IdList ((u8)0x01) /* identifier list mode */ - -#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ - ((MODE) == CAN_FilterMode_IdList)) - -/* CAN filter scale */ -#define CAN_FilterScale_16bit ((u8)0x00) /* 16-bit filter scale */ -#define CAN_FilterScale_32bit ((u8)0x01) /* 2-bit filter scale */ - -#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ - ((SCALE) == CAN_FilterScale_32bit)) - -/* CAN filter FIFO assignation */ -#define CAN_FilterFIFO0 ((u8)0x00) /* Filter FIFO 0 assignment for filter x */ -#define CAN_FilterFIFO1 ((u8)0x01) /* Filter FIFO 1 assignment for filter x */ - -#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ - ((FIFO) == CAN_FilterFIFO1)) - -/* CAN Tx */ -#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((u8)0x02)) -#define IS_CAN_STDID(STDID) ((STDID) <= ((u32)0x7FF)) -#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((u32)0x1FFFFFFF)) -#define IS_CAN_DLC(DLC) ((DLC) <= ((u8)0x08)) - -/* CAN identifier type */ -#define CAN_ID_STD ((u32)0x00000000) /* Standard Id */ -#define CAN_ID_EXT ((u32)0x00000004) /* Extended Id */ - -#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || ((IDTYPE) == CAN_ID_EXT)) - -/* CAN remote transmission request */ -#define CAN_RTR_DATA ((u32)0x00000000) /* Data frame */ -#define CAN_RTR_REMOTE ((u32)0x00000002) /* Remote frame */ - -#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE)) - -/* CAN transmit constants */ -#define CANTXFAILED ((u8)0x00) /* CAN transmission failed */ -#define CANTXOK ((u8)0x01) /* CAN transmission succeeded */ -#define CANTXPENDING ((u8)0x02) /* CAN transmission pending */ -#define CAN_NO_MB ((u8)0x04) /* CAN cell did not provide an empty mailbox */ - -/* CAN receive FIFO number constants */ -#define CAN_FIFO0 ((u8)0x00) /* CAN FIFO0 used to receive */ -#define CAN_FIFO1 ((u8)0x01) /* CAN FIFO1 used to receive */ - -#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) - -/* CAN sleep constants */ -#define CANSLEEPFAILED ((u8)0x00) /* CAN did not enter the sleep mode */ -#define CANSLEEPOK ((u8)0x01) /* CAN entered the sleep mode */ - -/* CAN wake up constants */ -#define CANWAKEUPFAILED ((u8)0x00) /* CAN did not leave the sleep mode */ -#define CANWAKEUPOK ((u8)0x01) /* CAN leaved the sleep mode */ - -/* CAN flags */ -#define CAN_FLAG_EWG ((u32)0x00000001) /* Error Warning Flag */ -#define CAN_FLAG_EPV ((u32)0x00000002) /* Error Passive Flag */ -#define CAN_FLAG_BOF ((u32)0x00000004) /* Bus-Off Flag */ - -#define IS_CAN_FLAG(FLAG) (((FLAG) == CAN_FLAG_EWG) || ((FLAG) == CAN_FLAG_EPV) ||\ - ((FLAG) == CAN_FLAG_BOF)) - -/* CAN interrupts */ -#define CAN_IT_RQCP0 ((u32)0x00000005) /* Request completed mailbox 0 */ -#define CAN_IT_RQCP1 ((u32)0x00000006) /* Request completed mailbox 1 */ -#define CAN_IT_RQCP2 ((u32)0x00000007) /* Request completed mailbox 2 */ -#define CAN_IT_TME ((u32)0x00000001) /* Transmit mailbox empty */ -#define CAN_IT_FMP0 ((u32)0x00000002) /* FIFO 0 message pending */ -#define CAN_IT_FF0 ((u32)0x00000004) /* FIFO 0 full */ -#define CAN_IT_FOV0 ((u32)0x00000008) /* FIFO 0 overrun */ -#define CAN_IT_FMP1 ((u32)0x00000010) /* FIFO 1 message pending */ -#define CAN_IT_FF1 ((u32)0x00000020) /* FIFO 1 full */ -#define CAN_IT_FOV1 ((u32)0x00000040) /* FIFO 1 overrun */ -#define CAN_IT_EWG ((u32)0x00000100) /* Error warning */ -#define CAN_IT_EPV ((u32)0x00000200) /* Error passive */ -#define CAN_IT_BOF ((u32)0x00000400) /* Bus-off */ -#define CAN_IT_LEC ((u32)0x00000800) /* Last error code */ -#define CAN_IT_ERR ((u32)0x00008000) /* Error */ -#define CAN_IT_WKU ((u32)0x00010000) /* Wake-up */ -#define CAN_IT_SLK ((u32)0x00020000) /* Sleep */ - -#define IS_CAN_ITConfig(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ - ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ - ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) - -#define IS_CAN_ITStatus(IT) (((IT) == CAN_IT_RQCP0) || ((IT) == CAN_IT_RQCP1) ||\ - ((IT) == CAN_IT_RQCP2) || ((IT) == CAN_IT_FF0) ||\ - ((IT) == CAN_IT_FOV0) || ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported function protypes ----------------------------------------------- */ -void CAN_DeInit(void); -u8 CAN_Init(CAN_InitTypeDef* CAN_InitStruct); -void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); -void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); -void CAN_ITConfig(u32 CAN_IT, FunctionalState NewState); -u8 CAN_Transmit(CanTxMsg* TxMessage); -u8 CAN_TransmitStatus(u8 TransmitMailbox); -void CAN_CancelTransmit(u8 Mailbox); -void CAN_FIFORelease(u8 FIFONumber); -u8 CAN_MessagePending(u8 FIFONumber); -void CAN_Receive(u8 FIFONumber, CanRxMsg* RxMessage); -u8 CAN_Sleep(void); -u8 CAN_WakeUp(void); -FlagStatus CAN_GetFlagStatus(u32 CAN_FLAG); -void CAN_ClearFlag(u32 CAN_FLAG); -ITStatus CAN_GetITStatus(u32 CAN_IT); -void CAN_ClearITPendingBit(u32 CAN_IT); - -#endif /* __STM32F10x_CAN_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_crc.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_crc.h deleted file mode 100755 index edeef36..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_crc.h +++ /dev/null @@ -1,37 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_crc.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* CRC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CRC_H -#define __STM32F10x_CRC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void CRC_ResetDR(void); -u32 CRC_CalcCRC(u32 Data); -u32 CRC_CalcBlockCRC(u32 pBuffer[], u32 BufferLength); -u32 CRC_GetCRC(void); -void CRC_SetIDRegister(u8 IDValue); -u8 CRC_GetIDRegister(void); - -#endif /* __STM32F10x_CRC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dac.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dac.h deleted file mode 100755 index 98c1642..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dac.h +++ /dev/null @@ -1,167 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dac.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* DAC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DAC_H -#define __STM32F10x_DAC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* DAC Init structure definition */ -typedef struct -{ - u32 DAC_Trigger; - u32 DAC_WaveGeneration; - u32 DAC_LFSRUnmask_TriangleAmplitude; - u32 DAC_OutputBuffer; -}DAC_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* DAC trigger selection */ -#define DAC_Trigger_None ((u32)0x00000000) -#define DAC_Trigger_T6_TRGO ((u32)0x00000004) -#define DAC_Trigger_T8_TRGO ((u32)0x0000000C) -#define DAC_Trigger_T7_TRGO ((u32)0x00000014) -#define DAC_Trigger_T5_TRGO ((u32)0x0000001C) -#define DAC_Trigger_T2_TRGO ((u32)0x00000024) -#define DAC_Trigger_T4_TRGO ((u32)0x0000002C) -#define DAC_Trigger_Ext_IT9 ((u32)0x00000034) -#define DAC_Trigger_Software ((u32)0x0000003C) - -#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \ - ((TRIGGER) == DAC_Trigger_T6_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T8_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T7_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T5_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T2_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T4_TRGO) || \ - ((TRIGGER) == DAC_Trigger_Ext_IT9) || \ - ((TRIGGER) == DAC_Trigger_Software)) - -/* DAC wave generation */ -#define DAC_WaveGeneration_None ((u32)0x00000000) -#define DAC_WaveGeneration_Noise ((u32)0x00000040) -#define DAC_WaveGeneration_Triangle ((u32)0x00000080) - -#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \ - ((WAVE) == DAC_WaveGeneration_Noise) || \ - ((WAVE) == DAC_WaveGeneration_Triangle)) - -/* DAC noise wave generation mask / triangle wave generation max amplitude */ -#define DAC_LFSRUnmask_Bit0 ((u32)0x00000000) -#define DAC_LFSRUnmask_Bits1_0 ((u32)0x00000100) -#define DAC_LFSRUnmask_Bits2_0 ((u32)0x00000200) -#define DAC_LFSRUnmask_Bits3_0 ((u32)0x00000300) -#define DAC_LFSRUnmask_Bits4_0 ((u32)0x00000400) -#define DAC_LFSRUnmask_Bits5_0 ((u32)0x00000500) -#define DAC_LFSRUnmask_Bits6_0 ((u32)0x00000600) -#define DAC_LFSRUnmask_Bits7_0 ((u32)0x00000700) -#define DAC_LFSRUnmask_Bits8_0 ((u32)0x00000800) -#define DAC_LFSRUnmask_Bits9_0 ((u32)0x00000900) -#define DAC_LFSRUnmask_Bits10_0 ((u32)0x00000A00) -#define DAC_LFSRUnmask_Bits11_0 ((u32)0x00000B00) - -#define DAC_TriangleAmplitude_1 ((u32)0x00000000) -#define DAC_TriangleAmplitude_3 ((u32)0x00000100) -#define DAC_TriangleAmplitude_7 ((u32)0x00000200) -#define DAC_TriangleAmplitude_15 ((u32)0x00000300) -#define DAC_TriangleAmplitude_31 ((u32)0x00000400) -#define DAC_TriangleAmplitude_63 ((u32)0x00000500) -#define DAC_TriangleAmplitude_127 ((u32)0x00000600) -#define DAC_TriangleAmplitude_255 ((u32)0x00000700) -#define DAC_TriangleAmplitude_511 ((u32)0x00000800) -#define DAC_TriangleAmplitude_1023 ((u32)0x00000900) -#define DAC_TriangleAmplitude_2047 ((u32)0x00000A00) -#define DAC_TriangleAmplitude_4095 ((u32)0x00000B00) - -#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \ - ((VALUE) == DAC_TriangleAmplitude_1) || \ - ((VALUE) == DAC_TriangleAmplitude_3) || \ - ((VALUE) == DAC_TriangleAmplitude_7) || \ - ((VALUE) == DAC_TriangleAmplitude_15) || \ - ((VALUE) == DAC_TriangleAmplitude_31) || \ - ((VALUE) == DAC_TriangleAmplitude_63) || \ - ((VALUE) == DAC_TriangleAmplitude_127) || \ - ((VALUE) == DAC_TriangleAmplitude_255) || \ - ((VALUE) == DAC_TriangleAmplitude_511) || \ - ((VALUE) == DAC_TriangleAmplitude_1023) || \ - ((VALUE) == DAC_TriangleAmplitude_2047) || \ - ((VALUE) == DAC_TriangleAmplitude_4095)) - -/* DAC output buffer */ -#define DAC_OutputBuffer_Enable ((u32)0x00000000) -#define DAC_OutputBuffer_Disable ((u32)0x00000002) - -#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \ - ((STATE) == DAC_OutputBuffer_Disable)) - -/* DAC Channel selection */ -#define DAC_Channel_1 ((u32)0x00000000) -#define DAC_Channel_2 ((u32)0x00000010) - -#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \ - ((CHANNEL) == DAC_Channel_2)) - -/* DAC data alignement */ -#define DAC_Align_12b_R ((u32)0x00000000) -#define DAC_Align_12b_L ((u32)0x00000004) -#define DAC_Align_8b_R ((u32)0x00000008) - -#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \ - ((ALIGN) == DAC_Align_12b_L) || \ - ((ALIGN) == DAC_Align_8b_R)) - -/* DAC wave generation */ -#define DAC_Wave_Noise ((u32)0x00000040) -#define DAC_Wave_Triangle ((u32)0x00000080) - -#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \ - ((WAVE) == DAC_Wave_Triangle)) - -/* DAC data ------------------------------------------------------------------*/ -#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -void DAC_DeInit(void); -void DAC_Init(u32 DAC_Channel, DAC_InitTypeDef* DAC_InitStruct); -void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct); -void DAC_Cmd(u32 DAC_Channel, FunctionalState NewState); -void DAC_DMACmd(u32 DAC_Channel, FunctionalState NewState); -void DAC_SoftwareTriggerCmd(u32 DAC_Channel, FunctionalState NewState); -void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); -void DAC_WaveGenerationCmd(u32 DAC_Channel, u32 DAC_Wave, FunctionalState NewState); -void DAC_SetChannel1Data(u32 DAC_Align, u16 Data); -void DAC_SetChannel2Data(u32 DAC_Align, u16 Data); -void DAC_SetDualChannelData(u32 DAC_Align, u16 Data2, u16 Data1); -u16 DAC_GetDataOutputValue(u32 DAC_Channel); - -#endif /*__STM32F10x_DAC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dbgmcu.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dbgmcu.h deleted file mode 100755 index 440f07f..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dbgmcu.h +++ /dev/null @@ -1,55 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dbgmcu.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* DBGMCU firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DBGMCU_H -#define __STM32F10x_DBGMCU_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -#define DBGMCU_SLEEP ((u32)0x00000001) -#define DBGMCU_STOP ((u32)0x00000002) -#define DBGMCU_STANDBY ((u32)0x00000004) -#define DBGMCU_IWDG_STOP ((u32)0x00000100) -#define DBGMCU_WWDG_STOP ((u32)0x00000200) -#define DBGMCU_TIM1_STOP ((u32)0x00000400) -#define DBGMCU_TIM2_STOP ((u32)0x00000800) -#define DBGMCU_TIM3_STOP ((u32)0x00001000) -#define DBGMCU_TIM4_STOP ((u32)0x00002000) -#define DBGMCU_CAN_STOP ((u32)0x00004000) -#define DBGMCU_I2C1_SMBUS_TIMEOUT ((u32)0x00008000) -#define DBGMCU_I2C2_SMBUS_TIMEOUT ((u32)0x00010000) -#define DBGMCU_TIM5_STOP ((u32)0x00020000) -#define DBGMCU_TIM6_STOP ((u32)0x00040000) -#define DBGMCU_TIM7_STOP ((u32)0x00080000) -#define DBGMCU_TIM8_STOP ((u32)0x00100000) - -#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFE000F8) == 0x00) && ((PERIPH) != 0x00)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -u32 DBGMCU_GetREVID(void); -u32 DBGMCU_GetDEVID(void); -void DBGMCU_Config(u32 DBGMCU_Periph, FunctionalState NewState); - -#endif /* __STM32F10x_DBGMCU_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ - - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dma.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dma.h deleted file mode 100755 index 7ed4969..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_dma.h +++ /dev/null @@ -1,297 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dma.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* DMA firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DMA_H -#define __STM32F10x_DMA_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* DMA Init structure definition */ -typedef struct -{ - u32 DMA_PeripheralBaseAddr; - u32 DMA_MemoryBaseAddr; - u32 DMA_DIR; - u32 DMA_BufferSize; - u32 DMA_PeripheralInc; - u32 DMA_MemoryInc; - u32 DMA_PeripheralDataSize; - u32 DMA_MemoryDataSize; - u32 DMA_Mode; - u32 DMA_Priority; - u32 DMA_M2M; -}DMA_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -#define IS_DMA_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == DMA1_Channel1_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel2_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel3_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel4_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel5_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel6_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel7_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel1_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel2_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel3_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel4_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel5_BASE)) - -/* DMA data transfer direction -----------------------------------------------*/ -#define DMA_DIR_PeripheralDST ((u32)0x00000010) -#define DMA_DIR_PeripheralSRC ((u32)0x00000000) - -#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \ - ((DIR) == DMA_DIR_PeripheralSRC)) - -/* DMA peripheral incremented mode -------------------------------------------*/ -#define DMA_PeripheralInc_Enable ((u32)0x00000040) -#define DMA_PeripheralInc_Disable ((u32)0x00000000) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ - ((STATE) == DMA_PeripheralInc_Disable)) - -/* DMA memory incremented mode -----------------------------------------------*/ -#define DMA_MemoryInc_Enable ((u32)0x00000080) -#define DMA_MemoryInc_Disable ((u32)0x00000000) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ - ((STATE) == DMA_MemoryInc_Disable)) - -/* DMA peripheral data size --------------------------------------------------*/ -#define DMA_PeripheralDataSize_Byte ((u32)0x00000000) -#define DMA_PeripheralDataSize_HalfWord ((u32)0x00000100) -#define DMA_PeripheralDataSize_Word ((u32)0x00000200) - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ - ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ - ((SIZE) == DMA_PeripheralDataSize_Word)) - -/* DMA memory data size ------------------------------------------------------*/ -#define DMA_MemoryDataSize_Byte ((u32)0x00000000) -#define DMA_MemoryDataSize_HalfWord ((u32)0x00000400) -#define DMA_MemoryDataSize_Word ((u32)0x00000800) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ - ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ - ((SIZE) == DMA_MemoryDataSize_Word)) - -/* DMA circular/normal mode --------------------------------------------------*/ -#define DMA_Mode_Circular ((u32)0x00000020) -#define DMA_Mode_Normal ((u32)0x00000000) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal)) - -/* DMA priority level --------------------------------------------------------*/ -#define DMA_Priority_VeryHigh ((u32)0x00003000) -#define DMA_Priority_High ((u32)0x00002000) -#define DMA_Priority_Medium ((u32)0x00001000) -#define DMA_Priority_Low ((u32)0x00000000) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \ - ((PRIORITY) == DMA_Priority_High) || \ - ((PRIORITY) == DMA_Priority_Medium) || \ - ((PRIORITY) == DMA_Priority_Low)) - -/* DMA memory to memory ------------------------------------------------------*/ -#define DMA_M2M_Enable ((u32)0x00004000) -#define DMA_M2M_Disable ((u32)0x00000000) - -#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable)) - -/* DMA interrupts definition -------------------------------------------------*/ -#define DMA_IT_TC ((u32)0x00000002) -#define DMA_IT_HT ((u32)0x00000004) -#define DMA_IT_TE ((u32)0x00000008) - -#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00)) - -/* For DMA1 */ -#define DMA1_IT_GL1 ((u32)0x00000001) -#define DMA1_IT_TC1 ((u32)0x00000002) -#define DMA1_IT_HT1 ((u32)0x00000004) -#define DMA1_IT_TE1 ((u32)0x00000008) -#define DMA1_IT_GL2 ((u32)0x00000010) -#define DMA1_IT_TC2 ((u32)0x00000020) -#define DMA1_IT_HT2 ((u32)0x00000040) -#define DMA1_IT_TE2 ((u32)0x00000080) -#define DMA1_IT_GL3 ((u32)0x00000100) -#define DMA1_IT_TC3 ((u32)0x00000200) -#define DMA1_IT_HT3 ((u32)0x00000400) -#define DMA1_IT_TE3 ((u32)0x00000800) -#define DMA1_IT_GL4 ((u32)0x00001000) -#define DMA1_IT_TC4 ((u32)0x00002000) -#define DMA1_IT_HT4 ((u32)0x00004000) -#define DMA1_IT_TE4 ((u32)0x00008000) -#define DMA1_IT_GL5 ((u32)0x00010000) -#define DMA1_IT_TC5 ((u32)0x00020000) -#define DMA1_IT_HT5 ((u32)0x00040000) -#define DMA1_IT_TE5 ((u32)0x00080000) -#define DMA1_IT_GL6 ((u32)0x00100000) -#define DMA1_IT_TC6 ((u32)0x00200000) -#define DMA1_IT_HT6 ((u32)0x00400000) -#define DMA1_IT_TE6 ((u32)0x00800000) -#define DMA1_IT_GL7 ((u32)0x01000000) -#define DMA1_IT_TC7 ((u32)0x02000000) -#define DMA1_IT_HT7 ((u32)0x04000000) -#define DMA1_IT_TE7 ((u32)0x08000000) -/* For DMA2 */ -#define DMA2_IT_GL1 ((u32)0x10000001) -#define DMA2_IT_TC1 ((u32)0x10000002) -#define DMA2_IT_HT1 ((u32)0x10000004) -#define DMA2_IT_TE1 ((u32)0x10000008) -#define DMA2_IT_GL2 ((u32)0x10000010) -#define DMA2_IT_TC2 ((u32)0x10000020) -#define DMA2_IT_HT2 ((u32)0x10000040) -#define DMA2_IT_TE2 ((u32)0x10000080) -#define DMA2_IT_GL3 ((u32)0x10000100) -#define DMA2_IT_TC3 ((u32)0x10000200) -#define DMA2_IT_HT3 ((u32)0x10000400) -#define DMA2_IT_TE3 ((u32)0x10000800) -#define DMA2_IT_GL4 ((u32)0x10001000) -#define DMA2_IT_TC4 ((u32)0x10002000) -#define DMA2_IT_HT4 ((u32)0x10004000) -#define DMA2_IT_TE4 ((u32)0x10008000) -#define DMA2_IT_GL5 ((u32)0x10010000) -#define DMA2_IT_TC5 ((u32)0x10020000) -#define DMA2_IT_HT5 ((u32)0x10040000) -#define DMA2_IT_TE5 ((u32)0x10080000) - -#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00)) -#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \ - ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \ - ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \ - ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \ - ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \ - ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \ - ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \ - ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \ - ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \ - ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \ - ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \ - ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \ - ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \ - ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \ - ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \ - ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \ - ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \ - ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \ - ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \ - ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \ - ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \ - ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \ - ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \ - ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5)) - -/* DMA flags definition ------------------------------------------------------*/ -/* For DMA1 */ -#define DMA1_FLAG_GL1 ((u32)0x00000001) -#define DMA1_FLAG_TC1 ((u32)0x00000002) -#define DMA1_FLAG_HT1 ((u32)0x00000004) -#define DMA1_FLAG_TE1 ((u32)0x00000008) -#define DMA1_FLAG_GL2 ((u32)0x00000010) -#define DMA1_FLAG_TC2 ((u32)0x00000020) -#define DMA1_FLAG_HT2 ((u32)0x00000040) -#define DMA1_FLAG_TE2 ((u32)0x00000080) -#define DMA1_FLAG_GL3 ((u32)0x00000100) -#define DMA1_FLAG_TC3 ((u32)0x00000200) -#define DMA1_FLAG_HT3 ((u32)0x00000400) -#define DMA1_FLAG_TE3 ((u32)0x00000800) -#define DMA1_FLAG_GL4 ((u32)0x00001000) -#define DMA1_FLAG_TC4 ((u32)0x00002000) -#define DMA1_FLAG_HT4 ((u32)0x00004000) -#define DMA1_FLAG_TE4 ((u32)0x00008000) -#define DMA1_FLAG_GL5 ((u32)0x00010000) -#define DMA1_FLAG_TC5 ((u32)0x00020000) -#define DMA1_FLAG_HT5 ((u32)0x00040000) -#define DMA1_FLAG_TE5 ((u32)0x00080000) -#define DMA1_FLAG_GL6 ((u32)0x00100000) -#define DMA1_FLAG_TC6 ((u32)0x00200000) -#define DMA1_FLAG_HT6 ((u32)0x00400000) -#define DMA1_FLAG_TE6 ((u32)0x00800000) -#define DMA1_FLAG_GL7 ((u32)0x01000000) -#define DMA1_FLAG_TC7 ((u32)0x02000000) -#define DMA1_FLAG_HT7 ((u32)0x04000000) -#define DMA1_FLAG_TE7 ((u32)0x08000000) -/* For DMA2 */ -#define DMA2_FLAG_GL1 ((u32)0x10000001) -#define DMA2_FLAG_TC1 ((u32)0x10000002) -#define DMA2_FLAG_HT1 ((u32)0x10000004) -#define DMA2_FLAG_TE1 ((u32)0x10000008) -#define DMA2_FLAG_GL2 ((u32)0x10000010) -#define DMA2_FLAG_TC2 ((u32)0x10000020) -#define DMA2_FLAG_HT2 ((u32)0x10000040) -#define DMA2_FLAG_TE2 ((u32)0x10000080) -#define DMA2_FLAG_GL3 ((u32)0x10000100) -#define DMA2_FLAG_TC3 ((u32)0x10000200) -#define DMA2_FLAG_HT3 ((u32)0x10000400) -#define DMA2_FLAG_TE3 ((u32)0x10000800) -#define DMA2_FLAG_GL4 ((u32)0x10001000) -#define DMA2_FLAG_TC4 ((u32)0x10002000) -#define DMA2_FLAG_HT4 ((u32)0x10004000) -#define DMA2_FLAG_TE4 ((u32)0x10008000) -#define DMA2_FLAG_GL5 ((u32)0x10010000) -#define DMA2_FLAG_TC5 ((u32)0x10020000) -#define DMA2_FLAG_HT5 ((u32)0x10040000) -#define DMA2_FLAG_TE5 ((u32)0x10080000) - -#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00)) -#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \ - ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \ - ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \ - ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \ - ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \ - ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \ - ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \ - ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \ - ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \ - ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \ - ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \ - ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \ - ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \ - ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \ - ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \ - ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \ - ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \ - ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \ - ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \ - ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \ - ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \ - ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \ - ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \ - ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5)) - -/* DMA Buffer Size -----------------------------------------------------------*/ -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx); -void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct); -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); -void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState); -void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, u32 DMA_IT, FunctionalState NewState); -u16 DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx); -FlagStatus DMA_GetFlagStatus(u32 DMA_FLAG); -void DMA_ClearFlag(u32 DMA_FLAG); -ITStatus DMA_GetITStatus(u32 DMA_IT); -void DMA_ClearITPendingBit(u32 DMA_IT); - -#endif /*__STM32F10x_DMA_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_exti.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_exti.h deleted file mode 100755 index efbedf3..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_exti.h +++ /dev/null @@ -1,107 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_exti.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* EXTI firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_EXTI_H -#define __STM32F10x_EXTI_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* EXTI mode enumeration -----------------------------------------------------*/ -typedef enum -{ - EXTI_Mode_Interrupt = 0x00, - EXTI_Mode_Event = 0x04 -}EXTIMode_TypeDef; - -#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) - -/* EXTI Trigger enumeration --------------------------------------------------*/ -typedef enum -{ - EXTI_Trigger_Rising = 0x08, - EXTI_Trigger_Falling = 0x0C, - EXTI_Trigger_Rising_Falling = 0x10 -}EXTITrigger_TypeDef; - -#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ - ((TRIGGER) == EXTI_Trigger_Falling) || \ - ((TRIGGER) == EXTI_Trigger_Rising_Falling)) - -/* EXTI Init Structure definition --------------------------------------------*/ -typedef struct -{ - u32 EXTI_Line; - EXTIMode_TypeDef EXTI_Mode; - EXTITrigger_TypeDef EXTI_Trigger; - FunctionalState EXTI_LineCmd; -}EXTI_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* EXTI Lines ----------------------------------------------------------------*/ -#define EXTI_Line0 ((u32)0x00001) /* External interrupt line 0 */ -#define EXTI_Line1 ((u32)0x00002) /* External interrupt line 1 */ -#define EXTI_Line2 ((u32)0x00004) /* External interrupt line 2 */ -#define EXTI_Line3 ((u32)0x00008) /* External interrupt line 3 */ -#define EXTI_Line4 ((u32)0x00010) /* External interrupt line 4 */ -#define EXTI_Line5 ((u32)0x00020) /* External interrupt line 5 */ -#define EXTI_Line6 ((u32)0x00040) /* External interrupt line 6 */ -#define EXTI_Line7 ((u32)0x00080) /* External interrupt line 7 */ -#define EXTI_Line8 ((u32)0x00100) /* External interrupt line 8 */ -#define EXTI_Line9 ((u32)0x00200) /* External interrupt line 9 */ -#define EXTI_Line10 ((u32)0x00400) /* External interrupt line 10 */ -#define EXTI_Line11 ((u32)0x00800) /* External interrupt line 11 */ -#define EXTI_Line12 ((u32)0x01000) /* External interrupt line 12 */ -#define EXTI_Line13 ((u32)0x02000) /* External interrupt line 13 */ -#define EXTI_Line14 ((u32)0x04000) /* External interrupt line 14 */ -#define EXTI_Line15 ((u32)0x08000) /* External interrupt line 15 */ -#define EXTI_Line16 ((u32)0x10000) /* External interrupt line 16 - Connected to the PVD Output */ -#define EXTI_Line17 ((u32)0x20000) /* External interrupt line 17 - Connected to the RTC Alarm event */ -#define EXTI_Line18 ((u32)0x40000) /* External interrupt line 18 - Connected to the USB Wakeup from - suspend event */ - -#define IS_EXTI_LINE(LINE) ((((LINE) & (u32)0xFFF80000) == 0x00) && ((LINE) != (u16)0x00)) - -#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ - ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ - ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ - ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ - ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ - ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ - ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ - ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ - ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ - ((LINE) == EXTI_Line18)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void EXTI_DeInit(void); -void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); -void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); -void EXTI_GenerateSWInterrupt(u32 EXTI_Line); -FlagStatus EXTI_GetFlagStatus(u32 EXTI_Line); -void EXTI_ClearFlag(u32 EXTI_Line); -ITStatus EXTI_GetITStatus(u32 EXTI_Line); -void EXTI_ClearITPendingBit(u32 EXTI_Line); - -#endif /* __STM32F10x_EXTI_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_flash.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_flash.h deleted file mode 100755 index 1b50230..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_flash.h +++ /dev/null @@ -1,208 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_flash.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* FLASH firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_FLASH_H -#define __STM32F10x_FLASH_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -#ifdef _FLASH_PROG -/* FLASH Status */ -typedef enum -{ - FLASH_BUSY = 1, - FLASH_ERROR_PG, - FLASH_ERROR_WRP, - FLASH_COMPLETE, - FLASH_TIMEOUT -}FLASH_Status; -#endif - -/* Flash Latency -------------------------------------------------------------*/ -#define FLASH_Latency_0 ((u32)0x00000000) /* FLASH Zero Latency cycle */ -#define FLASH_Latency_1 ((u32)0x00000001) /* FLASH One Latency cycle */ -#define FLASH_Latency_2 ((u32)0x00000002) /* FLASH Two Latency cycles */ - -#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ - ((LATENCY) == FLASH_Latency_1) || \ - ((LATENCY) == FLASH_Latency_2)) - -/* Half Cycle Enable/Disable -------------------------------------------------*/ -#define FLASH_HalfCycleAccess_Enable ((u32)0x00000008) /* FLASH Half Cycle Enable */ -#define FLASH_HalfCycleAccess_Disable ((u32)0x00000000) /* FLASH Half Cycle Disable */ - -#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \ - ((STATE) == FLASH_HalfCycleAccess_Disable)) - - -/* Prefetch Buffer Enable/Disable --------------------------------------------*/ -#define FLASH_PrefetchBuffer_Enable ((u32)0x00000010) /* FLASH Prefetch Buffer Enable */ -#define FLASH_PrefetchBuffer_Disable ((u32)0x00000000) /* FLASH Prefetch Buffer Disable */ - -#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \ - ((STATE) == FLASH_PrefetchBuffer_Disable)) - -#ifdef _FLASH_PROG -/* Option Bytes Write Protection ---------------------------------------------*/ -/* Values to be used with STM32F10Xxx Medium-density devices: FLASH memory density - ranges between 32 and 128 Kbytes with page size equal to 1 Kbytes */ -#define FLASH_WRProt_Pages0to3 ((u32)0x00000001) /* Write protection of page 0 to 3 */ -#define FLASH_WRProt_Pages4to7 ((u32)0x00000002) /* Write protection of page 4 to 7 */ -#define FLASH_WRProt_Pages8to11 ((u32)0x00000004) /* Write protection of page 8 to 11 */ -#define FLASH_WRProt_Pages12to15 ((u32)0x00000008) /* Write protection of page 12 to 15 */ -#define FLASH_WRProt_Pages16to19 ((u32)0x00000010) /* Write protection of page 16 to 19 */ -#define FLASH_WRProt_Pages20to23 ((u32)0x00000020) /* Write protection of page 20 to 23 */ -#define FLASH_WRProt_Pages24to27 ((u32)0x00000040) /* Write protection of page 24 to 27 */ -#define FLASH_WRProt_Pages28to31 ((u32)0x00000080) /* Write protection of page 28 to 31 */ -#define FLASH_WRProt_Pages32to35 ((u32)0x00000100) /* Write protection of page 32 to 35 */ -#define FLASH_WRProt_Pages36to39 ((u32)0x00000200) /* Write protection of page 36 to 39 */ -#define FLASH_WRProt_Pages40to43 ((u32)0x00000400) /* Write protection of page 40 to 43 */ -#define FLASH_WRProt_Pages44to47 ((u32)0x00000800) /* Write protection of page 44 to 47 */ -#define FLASH_WRProt_Pages48to51 ((u32)0x00001000) /* Write protection of page 48 to 51 */ -#define FLASH_WRProt_Pages52to55 ((u32)0x00002000) /* Write protection of page 52 to 55 */ -#define FLASH_WRProt_Pages56to59 ((u32)0x00004000) /* Write protection of page 56 to 59 */ -#define FLASH_WRProt_Pages60to63 ((u32)0x00008000) /* Write protection of page 60 to 63 */ -#define FLASH_WRProt_Pages64to67 ((u32)0x00010000) /* Write protection of page 64 to 67 */ -#define FLASH_WRProt_Pages68to71 ((u32)0x00020000) /* Write protection of page 68 to 71 */ -#define FLASH_WRProt_Pages72to75 ((u32)0x00040000) /* Write protection of page 72 to 75 */ -#define FLASH_WRProt_Pages76to79 ((u32)0x00080000) /* Write protection of page 76 to 79 */ -#define FLASH_WRProt_Pages80to83 ((u32)0x00100000) /* Write protection of page 80 to 83 */ -#define FLASH_WRProt_Pages84to87 ((u32)0x00200000) /* Write protection of page 84 to 87 */ -#define FLASH_WRProt_Pages88to91 ((u32)0x00400000) /* Write protection of page 88 to 91 */ -#define FLASH_WRProt_Pages92to95 ((u32)0x00800000) /* Write protection of page 92 to 95 */ -#define FLASH_WRProt_Pages96to99 ((u32)0x01000000) /* Write protection of page 96 to 99 */ -#define FLASH_WRProt_Pages100to103 ((u32)0x02000000) /* Write protection of page 100 to 103 */ -#define FLASH_WRProt_Pages104to107 ((u32)0x04000000) /* Write protection of page 104 to 107 */ -#define FLASH_WRProt_Pages108to111 ((u32)0x08000000) /* Write protection of page 108 to 111 */ -#define FLASH_WRProt_Pages112to115 ((u32)0x10000000) /* Write protection of page 112 to 115 */ -#define FLASH_WRProt_Pages116to119 ((u32)0x20000000) /* Write protection of page 115 to 119 */ -#define FLASH_WRProt_Pages120to123 ((u32)0x40000000) /* Write protection of page 120 to 123 */ -#define FLASH_WRProt_Pages124to127 ((u32)0x80000000) /* Write protection of page 124 to 127 */ -/* Values to be used with STM32F10Xxx High-density devices: FLASH memory density - ranges between 256 and 512 Kbytes with page size equal to 2 Kbytes */ -#define FLASH_WRProt_Pages0to1 ((u32)0x00000001) /* Write protection of page 0 to 1 */ -#define FLASH_WRProt_Pages2to3 ((u32)0x00000002) /* Write protection of page 2 to 3 */ -#define FLASH_WRProt_Pages4to5 ((u32)0x00000004) /* Write protection of page 4 to 5 */ -#define FLASH_WRProt_Pages6to7 ((u32)0x00000008) /* Write protection of page 6 to 7 */ -#define FLASH_WRProt_Pages8to9 ((u32)0x00000010) /* Write protection of page 8 to 9 */ -#define FLASH_WRProt_Pages10to11 ((u32)0x00000020) /* Write protection of page 10 to 11 */ -#define FLASH_WRProt_Pages12to13 ((u32)0x00000040) /* Write protection of page 12 to 13 */ -#define FLASH_WRProt_Pages14to15 ((u32)0x00000080) /* Write protection of page 14 to 15 */ -#define FLASH_WRProt_Pages16to17 ((u32)0x00000100) /* Write protection of page 16 to 17 */ -#define FLASH_WRProt_Pages18to19 ((u32)0x00000200) /* Write protection of page 18 to 19 */ -#define FLASH_WRProt_Pages20to21 ((u32)0x00000400) /* Write protection of page 20 to 21 */ -#define FLASH_WRProt_Pages22to23 ((u32)0x00000800) /* Write protection of page 22 to 23 */ -#define FLASH_WRProt_Pages24to25 ((u32)0x00001000) /* Write protection of page 24 to 25 */ -#define FLASH_WRProt_Pages26to27 ((u32)0x00002000) /* Write protection of page 26 to 27 */ -#define FLASH_WRProt_Pages28to29 ((u32)0x00004000) /* Write protection of page 28 to 29 */ -#define FLASH_WRProt_Pages30to31 ((u32)0x00008000) /* Write protection of page 30 to 31 */ -#define FLASH_WRProt_Pages32to33 ((u32)0x00010000) /* Write protection of page 32 to 33 */ -#define FLASH_WRProt_Pages34to35 ((u32)0x00020000) /* Write protection of page 34 to 35 */ -#define FLASH_WRProt_Pages36to37 ((u32)0x00040000) /* Write protection of page 36 to 37 */ -#define FLASH_WRProt_Pages38to39 ((u32)0x00080000) /* Write protection of page 38 to 39 */ -#define FLASH_WRProt_Pages40to41 ((u32)0x00100000) /* Write protection of page 40 to 41 */ -#define FLASH_WRProt_Pages42to43 ((u32)0x00200000) /* Write protection of page 42 to 43 */ -#define FLASH_WRProt_Pages44to45 ((u32)0x00400000) /* Write protection of page 44 to 45 */ -#define FLASH_WRProt_Pages46to47 ((u32)0x00800000) /* Write protection of page 46 to 47 */ -#define FLASH_WRProt_Pages48to49 ((u32)0x01000000) /* Write protection of page 48 to 49 */ -#define FLASH_WRProt_Pages50to51 ((u32)0x02000000) /* Write protection of page 50 to 51 */ -#define FLASH_WRProt_Pages52to53 ((u32)0x04000000) /* Write protection of page 52 to 53 */ -#define FLASH_WRProt_Pages54to55 ((u32)0x08000000) /* Write protection of page 54 to 55 */ -#define FLASH_WRProt_Pages56to57 ((u32)0x10000000) /* Write protection of page 56 to 57 */ -#define FLASH_WRProt_Pages58to59 ((u32)0x20000000) /* Write protection of page 58 to 59 */ -#define FLASH_WRProt_Pages60to61 ((u32)0x40000000) /* Write protection of page 60 to 61 */ -#define FLASH_WRProt_Pages62to255 ((u32)0x80000000) /* Write protection of page 62 to 255 */ -#define FLASH_WRProt_AllPages ((u32)0xFFFFFFFF) /* Write protection of all Pages */ - -#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000)) - -#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x0807FFFF)) -#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) - -/* Option Bytes IWatchdog ----------------------------------------------------*/ -#define OB_IWDG_SW ((u16)0x0001) /* Software IWDG selected */ -#define OB_IWDG_HW ((u16)0x0000) /* Hardware IWDG selected */ - -#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) - -/* Option Bytes nRST_STOP ----------------------------------------------------*/ -#define OB_STOP_NoRST ((u16)0x0002) /* No reset generated when entering in STOP */ -#define OB_STOP_RST ((u16)0x0000) /* Reset generated when entering in STOP */ - -#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) - -/* Option Bytes nRST_STDBY ---------------------------------------------------*/ -#define OB_STDBY_NoRST ((u16)0x0004) /* No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((u16)0x0000) /* Reset generated when entering in STANDBY */ - -#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) - -/* FLASH Interrupts ----------------------------------------------------------*/ -#define FLASH_IT_ERROR ((u32)0x00000400) /* FPEC error interrupt source */ -#define FLASH_IT_EOP ((u32)0x00001000) /* End of FLASH Operation Interrupt source */ - -#define IS_FLASH_IT(IT) ((((IT) & (u32)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) - -/* FLASH Flags ---------------------------------------------------------------*/ -#define FLASH_FLAG_BSY ((u32)0x00000001) /* FLASH Busy flag */ -#define FLASH_FLAG_EOP ((u32)0x00000020) /* FLASH End of Operation flag */ -#define FLASH_FLAG_PGERR ((u32)0x00000004) /* FLASH Program error flag */ -#define FLASH_FLAG_WRPRTERR ((u32)0x00000010) /* FLASH Write protected error flag */ -#define FLASH_FLAG_OPTERR ((u32)0x00000001) /* FLASH Option Byte error flag */ - -#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (u32)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) - -#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ - ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ - ((FLAG) == FLASH_FLAG_OPTERR)) -#endif - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void FLASH_SetLatency(u32 FLASH_Latency); -void FLASH_HalfCycleAccessCmd(u32 FLASH_HalfCycleAccess); -void FLASH_PrefetchBufferCmd(u32 FLASH_PrefetchBuffer); - -#ifdef _FLASH_PROG -void FLASH_Unlock(void); -void FLASH_Lock(void); -FLASH_Status FLASH_ErasePage(u32 Page_Address); -FLASH_Status FLASH_EraseAllPages(void); -FLASH_Status FLASH_EraseOptionBytes(void); -FLASH_Status FLASH_ProgramWord(u32 Address, u32 Data); -FLASH_Status FLASH_ProgramHalfWord(u32 Address, u16 Data); -FLASH_Status FLASH_ProgramOptionByteData(u32 Address, u8 Data); -FLASH_Status FLASH_EnableWriteProtection(u32 FLASH_Pages); -FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState); -FLASH_Status FLASH_UserOptionByteConfig(u16 OB_IWDG, u16 OB_STOP, u16 OB_STDBY); -u32 FLASH_GetUserOptionByte(void); -u32 FLASH_GetWriteProtectionOptionByte(void); -FlagStatus FLASH_GetReadOutProtectionStatus(void); -FlagStatus FLASH_GetPrefetchBufferStatus(void); -void FLASH_ITConfig(u16 FLASH_IT, FunctionalState NewState); -FlagStatus FLASH_GetFlagStatus(u16 FLASH_FLAG); -void FLASH_ClearFlag(u16 FLASH_FLAG); -FLASH_Status FLASH_GetStatus(void); -FLASH_Status FLASH_WaitForLastOperation(u32 Timeout); -#endif - -#endif /* __STM32F10x_FLASH_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_fsmc.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_fsmc.h deleted file mode 100755 index c338c8e..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_fsmc.h +++ /dev/null @@ -1,355 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_fsmc.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* FSMC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_FSMC_H -#define __STM32F10x_FSMC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Timing parameters For NOR/SRAM Banks */ -typedef struct -{ - u32 FSMC_AddressSetupTime; - u32 FSMC_AddressHoldTime; - u32 FSMC_DataSetupTime; - u32 FSMC_BusTurnAroundDuration; - u32 FSMC_CLKDivision; - u32 FSMC_DataLatency; - u32 FSMC_AccessMode; -}FSMC_NORSRAMTimingInitTypeDef; - -/* FSMC NOR/SRAM Init structure definition */ -typedef struct -{ - u32 FSMC_Bank; - u32 FSMC_DataAddressMux; - u32 FSMC_MemoryType; - u32 FSMC_MemoryDataWidth; - u32 FSMC_BurstAccessMode; - u32 FSMC_WaitSignalPolarity; - u32 FSMC_WrapMode; - u32 FSMC_WaitSignalActive; - u32 FSMC_WriteOperation; - u32 FSMC_WaitSignal; - u32 FSMC_ExtendedMode; - u32 FSMC_AsyncWait; - u32 FSMC_WriteBurst; - /* Timing Parameters for write and read access if the ExtendedMode is not used*/ - FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; - /* Timing Parameters for write access if the ExtendedMode is used*/ - FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; -}FSMC_NORSRAMInitTypeDef; - -/* Timing parameters For FSMC NAND and PCCARD Banks */ -typedef struct -{ - u32 FSMC_SetupTime; - u32 FSMC_WaitSetupTime; - u32 FSMC_HoldSetupTime; - u32 FSMC_HiZSetupTime; -}FSMC_NAND_PCCARDTimingInitTypeDef; - -/* FSMC NAND Init structure definition */ -typedef struct -{ - u32 FSMC_Bank; - u32 FSMC_Waitfeature; - u32 FSMC_MemoryDataWidth; - u32 FSMC_ECC; - u32 FSMC_ECCPageSize; - u32 FSMC_AddressLowMapping; - u32 FSMC_TCLRSetupTime; - u32 FSMC_TARSetupTime; - /* FSMC Common Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; - /* FSMC Attribute Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; -}FSMC_NANDInitTypeDef; - -/* FSMC PCCARD Init structure definition */ -typedef struct -{ - u32 FSMC_Waitfeature; - u32 FSMC_AddressLowMapping; - u32 FSMC_TCLRSetupTime; - u32 FSMC_TARSetupTime; - /* FSMC Common Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; - /* FSMC Attribute Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; - /* FSMC IO Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; -}FSMC_PCCARDInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/*-------------------------------FSMC Banks definitions ----------------------*/ -#define FSMC_Bank1_NORSRAM1 ((u32)0x00000000) -#define FSMC_Bank1_NORSRAM2 ((u32)0x00000002) -#define FSMC_Bank1_NORSRAM3 ((u32)0x00000004) -#define FSMC_Bank1_NORSRAM4 ((u32)0x00000006) -#define FSMC_Bank2_NAND ((u32)0x00000010) -#define FSMC_Bank3_NAND ((u32)0x00000100) -#define FSMC_Bank4_PCCARD ((u32)0x00001000) - -#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \ - ((BANK) == FSMC_Bank1_NORSRAM2) || \ - ((BANK) == FSMC_Bank1_NORSRAM3) || \ - ((BANK) == FSMC_Bank1_NORSRAM4)) - - -#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND)) - -#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND) || \ - ((BANK) == FSMC_Bank4_PCCARD)) - -#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND) || \ - ((BANK) == FSMC_Bank4_PCCARD)) - - -/*------------------------------- NOR/SRAM Banks -----------------------------*/ -/* FSMC Data/Address Bus Multiplexing ----------------------------------------*/ -#define FSMC_DataAddressMux_Disable ((u32)0x00000000) -#define FSMC_DataAddressMux_Enable ((u32)0x00000002) - -#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \ - ((MUX) == FSMC_DataAddressMux_Enable)) - -/* FSMC Memory Type ----------------------------------------------------------*/ -#define FSMC_MemoryType_SRAM ((u32)0x00000000) -#define FSMC_MemoryType_CRAM ((u32)0x00000004) -#define FSMC_MemoryType_NOR ((u32)0x00000008) -#define FSMC_MemoryType_COSMORAM ((u32)0x0000000C) - -#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \ - ((MEMORY) == FSMC_MemoryType_CRAM)|| \ - ((MEMORY) == FSMC_MemoryType_NOR)|| \ - ((MEMORY) == FSMC_MemoryType_COSMORAM)) - -/* FSMC Data Width ----------------------------------------------------------*/ -#define FSMC_MemoryDataWidth_8b ((u32)0x00000000) -#define FSMC_MemoryDataWidth_16b ((u32)0x00000010) - -#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ - ((WIDTH) == FSMC_MemoryDataWidth_16b)) - - -/* FSMC Burst Access Mode ----------------------------------------------------*/ -#define FSMC_BurstAccessMode_Disable ((u32)0x00000000) -#define FSMC_BurstAccessMode_Enable ((u32)0x00000100) - -#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \ - ((STATE) == FSMC_BurstAccessMode_Enable)) - -/* FSMC Wait Signal Polarity -------------------------------------------------*/ -#define FSMC_WaitSignalPolarity_Low ((u32)0x00000000) -#define FSMC_WaitSignalPolarity_High ((u32)0x00000200) - -#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \ - ((POLARITY) == FSMC_WaitSignalPolarity_High)) - -/* FSMC Wrap Mode ------------------------------------------------------------*/ -#define FSMC_WrapMode_Disable ((u32)0x00000000) -#define FSMC_WrapMode_Enable ((u32)0x00000400) - -#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \ - ((MODE) == FSMC_WrapMode_Enable)) - -/* FSMC Wait Timing ----------------------------------------------------------*/ -#define FSMC_WaitSignalActive_BeforeWaitState ((u32)0x00000000) -#define FSMC_WaitSignalActive_DuringWaitState ((u32)0x00000800) - -#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \ - ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState)) - -/* FSMC Write Operation ------------------------------------------------------*/ -#define FSMC_WriteOperation_Disable ((u32)0x00000000) -#define FSMC_WriteOperation_Enable ((u32)0x00001000) - -#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \ - ((OPERATION) == FSMC_WriteOperation_Enable)) - -/* FSMC Wait Signal ----------------------------------------------------------*/ -#define FSMC_WaitSignal_Disable ((u32)0x00000000) -#define FSMC_WaitSignal_Enable ((u32)0x00002000) - -#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \ - ((SIGNAL) == FSMC_WaitSignal_Enable)) - -/* FSMC Extended Mode --------------------------------------------------------*/ -#define FSMC_ExtendedMode_Disable ((u32)0x00000000) -#define FSMC_ExtendedMode_Enable ((u32)0x00004000) - -#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \ - ((MODE) == FSMC_ExtendedMode_Enable)) - -/* FSMC Asynchronous Wait ----------------------------------------------------*/ -#define FSMC_AsyncWait_Disable ((u32)0x00000000) -#define FSMC_AsyncWait_Enable ((u32)0x00008000) - -#define IS_FSMC_ASYNC_WAIT(WAIT) (((WAIT) == FSMC_AsyncWait_Disable) || \ - ((WAIT) == FSMC_AsyncWait_Enable)) - -/* FSMC Write Burst ----------------------------------------------------------*/ -#define FSMC_WriteBurst_Disable ((u32)0x00000000) -#define FSMC_WriteBurst_Enable ((u32)0x00080000) - -#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \ - ((BURST) == FSMC_WriteBurst_Enable)) - -/* FSMC Address Setup Time ---------------------------------------------------*/ -#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF) - -/* FSMC Address Hold Time ----------------------------------------------------*/ -#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF) - -/* FSMC Data Setup Time ------------------------------------------------------*/ -#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF)) - -/* FSMC Bus Turn around Duration ---------------------------------------------*/ -#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF) - -/* FSMC CLK Division ---------------------------------------------------------*/ -#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF) - -/* FSMC Data Latency ---------------------------------------------------------*/ -#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF) - -/* FSMC Access Mode ----------------------------------------------------------*/ -#define FSMC_AccessMode_A ((u32)0x00000000) -#define FSMC_AccessMode_B ((u32)0x10000000) -#define FSMC_AccessMode_C ((u32)0x20000000) -#define FSMC_AccessMode_D ((u32)0x30000000) - -#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \ - ((MODE) == FSMC_AccessMode_B) || \ - ((MODE) == FSMC_AccessMode_C) || \ - ((MODE) == FSMC_AccessMode_D)) - -/*----------------------------- NAND and PCCARD Banks ------------------------*/ -/* FSMC Wait feature ---------------------------------------------------------*/ -#define FSMC_Waitfeature_Disable ((u32)0x00000000) -#define FSMC_Waitfeature_Enable ((u32)0x00000002) - -#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \ - ((FEATURE) == FSMC_Waitfeature_Enable)) - -/* FSMC Memory Data Width ----------------------------------------------------*/ -#define FSMC_MemoryDataWidth_8b ((u32)0x00000000) -#define FSMC_MemoryDataWidth_16b ((u32)0x00000010) - -#define IS_FSMC_DATA_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ - ((WIDTH) == FSMC_MemoryDataWidth_16b)) - -/* FSMC ECC ------------------------------------------------------------------*/ -#define FSMC_ECC_Disable ((u32)0x00000000) -#define FSMC_ECC_Enable ((u32)0x00000040) - -#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \ - ((STATE) == FSMC_ECC_Enable)) - -/* FSMC ECC Page Size --------------------------------------------------------*/ -#define FSMC_ECCPageSize_256Bytes ((u32)0x00000000) -#define FSMC_ECCPageSize_512Bytes ((u32)0x00020000) -#define FSMC_ECCPageSize_1024Bytes ((u32)0x00040000) -#define FSMC_ECCPageSize_2048Bytes ((u32)0x00060000) -#define FSMC_ECCPageSize_4096Bytes ((u32)0x00080000) -#define FSMC_ECCPageSize_8192Bytes ((u32)0x000A0000) - -#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_512Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_8192Bytes)) - -/* FSMC Address Low Mapping --------------------------------------------------*/ -#define FSMC_AddressLowMapping_Direct ((u32)0x00000000) -#define FSMC_AddressLowMapping_InDirect ((u32)0x00000100) - -#define IS_FSMC_ADDRESS_LOW_MAPPING(MAPPING) (((MAPPING) == FSMC_AddressLowMapping_Direct) || \ - ((MAPPING) == FSMC_AddressLowMapping_InDirect)) -/* FSMC TCLR Setup Time ------------------------------------------------------*/ -#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC TAR Setup Time -------------------------------------------------------*/ -#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC Setup Time ----------------------------------------------------*/ -#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC Wait Setup Time -----------------------------------------------*/ -#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC Hold Setup Time -----------------------------------------------*/ -#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC HiZ Setup Time ------------------------------------------------*/ -#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC Interrupt sources ----------------------------------------------------*/ -#define FSMC_IT_RisingEdge ((u32)0x00000008) -#define FSMC_IT_Level ((u32)0x00000010) -#define FSMC_IT_FallingEdge ((u32)0x00000020) - -#define IS_FSMC_IT(IT) ((((IT) & (u32)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000)) - -#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \ - ((IT) == FSMC_IT_Level) || \ - ((IT) == FSMC_IT_FallingEdge)) - -/* FSMC Flags ----------------------------------------------------------------*/ -#define FSMC_FLAG_RisingEdge ((u32)0x00000001) -#define FSMC_FLAG_Level ((u32)0x00000002) -#define FSMC_FLAG_FallingEdge ((u32)0x00000004) -#define FSMC_FLAG_FEMPT ((u32)0x00000040) - -#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \ - ((FLAG) == FSMC_FLAG_Level) || \ - ((FLAG) == FSMC_FLAG_FallingEdge) || \ - ((FLAG) == FSMC_FLAG_FEMPT)) - -#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (u32)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void FSMC_NORSRAMDeInit(u32 FSMC_Bank); -void FSMC_NANDDeInit(u32 FSMC_Bank); -void FSMC_PCCARDDeInit(void); -void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); -void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); -void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); -void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); -void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); -void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); -void FSMC_NORSRAMCmd(u32 FSMC_Bank, FunctionalState NewState); -void FSMC_NANDCmd(u32 FSMC_Bank, FunctionalState NewState); -void FSMC_PCCARDCmd(FunctionalState NewState); -void FSMC_NANDECCCmd(u32 FSMC_Bank, FunctionalState NewState); -u32 FSMC_GetECC(u32 FSMC_Bank); -void FSMC_ITConfig(u32 FSMC_Bank, u32 FSMC_IT, FunctionalState NewState); -FlagStatus FSMC_GetFlagStatus(u32 FSMC_Bank, u32 FSMC_FLAG); -void FSMC_ClearFlag(u32 FSMC_Bank, u32 FSMC_FLAG); -ITStatus FSMC_GetITStatus(u32 FSMC_Bank, u32 FSMC_IT); -void FSMC_ClearITPendingBit(u32 FSMC_Bank, u32 FSMC_IT); - -#endif /*__STM32F10x_FSMC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_gpio.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_gpio.h deleted file mode 100755 index 151cdde..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_gpio.h +++ /dev/null @@ -1,237 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_gpio.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* GPIO firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_GPIO_H -#define __STM32F10x_GPIO_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -#define IS_GPIO_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == GPIOA_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOB_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOC_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOD_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOE_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOF_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOG_BASE)) - -/* Output Maximum frequency selection ----------------------------------------*/ -typedef enum -{ - GPIO_Speed_10MHz = 1, - GPIO_Speed_2MHz, - GPIO_Speed_50MHz -}GPIOSpeed_TypeDef; - -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \ - ((SPEED) == GPIO_Speed_50MHz)) - -/* Configuration Mode enumeration --------------------------------------------*/ -typedef enum -{ GPIO_Mode_AIN = 0x0, - GPIO_Mode_IN_FLOATING = 0x04, - GPIO_Mode_IPD = 0x28, - GPIO_Mode_IPU = 0x48, - GPIO_Mode_Out_OD = 0x14, - GPIO_Mode_Out_PP = 0x10, - GPIO_Mode_AF_OD = 0x1C, - GPIO_Mode_AF_PP = 0x18 -}GPIOMode_TypeDef; - -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \ - ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \ - ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \ - ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP)) - -/* GPIO Init structure definition */ -typedef struct -{ - u16 GPIO_Pin; - GPIOSpeed_TypeDef GPIO_Speed; - GPIOMode_TypeDef GPIO_Mode; -}GPIO_InitTypeDef; - -/* Bit_SET and Bit_RESET enumeration -----------------------------------------*/ -typedef enum -{ Bit_RESET = 0, - Bit_SET -}BitAction; -#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) - -/* Exported constants --------------------------------------------------------*/ -/* GPIO pins define ----------------------------------------------------------*/ -#define GPIO_Pin_0 ((u16)0x0001) /* Pin 0 selected */ -#define GPIO_Pin_1 ((u16)0x0002) /* Pin 1 selected */ -#define GPIO_Pin_2 ((u16)0x0004) /* Pin 2 selected */ -#define GPIO_Pin_3 ((u16)0x0008) /* Pin 3 selected */ -#define GPIO_Pin_4 ((u16)0x0010) /* Pin 4 selected */ -#define GPIO_Pin_5 ((u16)0x0020) /* Pin 5 selected */ -#define GPIO_Pin_6 ((u16)0x0040) /* Pin 6 selected */ -#define GPIO_Pin_7 ((u16)0x0080) /* Pin 7 selected */ -#define GPIO_Pin_8 ((u16)0x0100) /* Pin 8 selected */ -#define GPIO_Pin_9 ((u16)0x0200) /* Pin 9 selected */ -#define GPIO_Pin_10 ((u16)0x0400) /* Pin 10 selected */ -#define GPIO_Pin_11 ((u16)0x0800) /* Pin 11 selected */ -#define GPIO_Pin_12 ((u16)0x1000) /* Pin 12 selected */ -#define GPIO_Pin_13 ((u16)0x2000) /* Pin 13 selected */ -#define GPIO_Pin_14 ((u16)0x4000) /* Pin 14 selected */ -#define GPIO_Pin_15 ((u16)0x8000) /* Pin 15 selected */ -#define GPIO_Pin_All ((u16)0xFFFF) /* All pins selected */ - -#define IS_GPIO_PIN(PIN) ((((PIN) & (u16)0x00) == 0x00) && ((PIN) != (u16)0x00)) - -#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ - ((PIN) == GPIO_Pin_1) || \ - ((PIN) == GPIO_Pin_2) || \ - ((PIN) == GPIO_Pin_3) || \ - ((PIN) == GPIO_Pin_4) || \ - ((PIN) == GPIO_Pin_5) || \ - ((PIN) == GPIO_Pin_6) || \ - ((PIN) == GPIO_Pin_7) || \ - ((PIN) == GPIO_Pin_8) || \ - ((PIN) == GPIO_Pin_9) || \ - ((PIN) == GPIO_Pin_10) || \ - ((PIN) == GPIO_Pin_11) || \ - ((PIN) == GPIO_Pin_12) || \ - ((PIN) == GPIO_Pin_13) || \ - ((PIN) == GPIO_Pin_14) || \ - ((PIN) == GPIO_Pin_15)) - -/* GPIO Remap define ---------------------------------------------------------*/ -#define GPIO_Remap_SPI1 ((u32)0x00000001) /* SPI1 Alternate Function mapping */ -#define GPIO_Remap_I2C1 ((u32)0x00000002) /* I2C1 Alternate Function mapping */ -#define GPIO_Remap_USART1 ((u32)0x00000004) /* USART1 Alternate Function mapping */ -#define GPIO_Remap_USART2 ((u32)0x00000008) /* USART2 Alternate Function mapping */ -#define GPIO_PartialRemap_USART3 ((u32)0x00140010) /* USART3 Partial Alternate Function mapping */ -#define GPIO_FullRemap_USART3 ((u32)0x00140030) /* USART3 Full Alternate Function mapping */ -#define GPIO_PartialRemap_TIM1 ((u32)0x00160040) /* TIM1 Partial Alternate Function mapping */ -#define GPIO_FullRemap_TIM1 ((u32)0x001600C0) /* TIM1 Full Alternate Function mapping */ -#define GPIO_PartialRemap1_TIM2 ((u32)0x00180100) /* TIM2 Partial1 Alternate Function mapping */ -#define GPIO_PartialRemap2_TIM2 ((u32)0x00180200) /* TIM2 Partial2 Alternate Function mapping */ -#define GPIO_FullRemap_TIM2 ((u32)0x00180300) /* TIM2 Full Alternate Function mapping */ -#define GPIO_PartialRemap_TIM3 ((u32)0x001A0800) /* TIM3 Partial Alternate Function mapping */ -#define GPIO_FullRemap_TIM3 ((u32)0x001A0C00) /* TIM3 Full Alternate Function mapping */ -#define GPIO_Remap_TIM4 ((u32)0x00001000) /* TIM4 Alternate Function mapping */ -#define GPIO_Remap1_CAN ((u32)0x001D4000) /* CAN Alternate Function mapping */ -#define GPIO_Remap2_CAN ((u32)0x001D6000) /* CAN Alternate Function mapping */ -#define GPIO_Remap_PD01 ((u32)0x00008000) /* PD01 Alternate Function mapping */ -#define GPIO_Remap_TIM5CH4_LSI ((u32)0x00200001) /* LSI connected to TIM5 Channel4 input capture for calibration */ -#define GPIO_Remap_ADC1_ETRGINJ ((u32)0x00200002) /* ADC1 External Trigger Injected Conversion remapping */ -#define GPIO_Remap_ADC1_ETRGREG ((u32)0x00200004) /* ADC1 External Trigger Regular Conversion remapping */ -#define GPIO_Remap_ADC2_ETRGINJ ((u32)0x00200008) /* ADC2 External Trigger Injected Conversion remapping */ -#define GPIO_Remap_ADC2_ETRGREG ((u32)0x00200010) /* ADC2 External Trigger Regular Conversion remapping */ -#define GPIO_Remap_SWJ_NoJTRST ((u32)0x00300100) /* Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */ -#define GPIO_Remap_SWJ_JTAGDisable ((u32)0x00300200) /* JTAG-DP Disabled and SW-DP Enabled */ -#define GPIO_Remap_SWJ_Disable ((u32)0x00300400) /* Full SWJ Disabled (JTAG-DP + SW-DP) */ - - -#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \ - ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \ - ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \ - ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \ - ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \ - ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \ - ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \ - ((REMAP) == GPIO_Remap1_CAN) || ((REMAP) == GPIO_Remap2_CAN) || \ - ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \ - ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \ - ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \ - ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable)|| \ - ((REMAP) == GPIO_Remap_SWJ_Disable)) - -/* GPIO Port Sources ---------------------------------------------------------*/ -#define GPIO_PortSourceGPIOA ((u8)0x00) -#define GPIO_PortSourceGPIOB ((u8)0x01) -#define GPIO_PortSourceGPIOC ((u8)0x02) -#define GPIO_PortSourceGPIOD ((u8)0x03) -#define GPIO_PortSourceGPIOE ((u8)0x04) -#define GPIO_PortSourceGPIOF ((u8)0x05) -#define GPIO_PortSourceGPIOG ((u8)0x06) - -#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOE)) - -#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOG)) - -/* GPIO Pin sources ----------------------------------------------------------*/ -#define GPIO_PinSource0 ((u8)0x00) -#define GPIO_PinSource1 ((u8)0x01) -#define GPIO_PinSource2 ((u8)0x02) -#define GPIO_PinSource3 ((u8)0x03) -#define GPIO_PinSource4 ((u8)0x04) -#define GPIO_PinSource5 ((u8)0x05) -#define GPIO_PinSource6 ((u8)0x06) -#define GPIO_PinSource7 ((u8)0x07) -#define GPIO_PinSource8 ((u8)0x08) -#define GPIO_PinSource9 ((u8)0x09) -#define GPIO_PinSource10 ((u8)0x0A) -#define GPIO_PinSource11 ((u8)0x0B) -#define GPIO_PinSource12 ((u8)0x0C) -#define GPIO_PinSource13 ((u8)0x0D) -#define GPIO_PinSource14 ((u8)0x0E) -#define GPIO_PinSource15 ((u8)0x0F) - -#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ - ((PINSOURCE) == GPIO_PinSource1) || \ - ((PINSOURCE) == GPIO_PinSource2) || \ - ((PINSOURCE) == GPIO_PinSource3) || \ - ((PINSOURCE) == GPIO_PinSource4) || \ - ((PINSOURCE) == GPIO_PinSource5) || \ - ((PINSOURCE) == GPIO_PinSource6) || \ - ((PINSOURCE) == GPIO_PinSource7) || \ - ((PINSOURCE) == GPIO_PinSource8) || \ - ((PINSOURCE) == GPIO_PinSource9) || \ - ((PINSOURCE) == GPIO_PinSource10) || \ - ((PINSOURCE) == GPIO_PinSource11) || \ - ((PINSOURCE) == GPIO_PinSource12) || \ - ((PINSOURCE) == GPIO_PinSource13) || \ - ((PINSOURCE) == GPIO_PinSource14) || \ - ((PINSOURCE) == GPIO_PinSource15)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void GPIO_DeInit(GPIO_TypeDef* GPIOx); -void GPIO_AFIODeInit(void); -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); -u8 GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -u16 GPIO_ReadInputData(GPIO_TypeDef* GPIOx); -u8 GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -u16 GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); -void GPIO_SetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin, BitAction BitVal); -void GPIO_Write(GPIO_TypeDef* GPIOx, u16 PortVal); -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -void GPIO_EventOutputConfig(u8 GPIO_PortSource, u8 GPIO_PinSource); -void GPIO_EventOutputCmd(FunctionalState NewState); -void GPIO_PinRemapConfig(u32 GPIO_Remap, FunctionalState NewState); -void GPIO_EXTILineConfig(u8 GPIO_PortSource, u8 GPIO_PinSource); - -#endif /* __STM32F10x_GPIO_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_i2c.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_i2c.h deleted file mode 100755 index 7e694cf..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_i2c.h +++ /dev/null @@ -1,289 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_i2c.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* I2C firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_I2C_H -#define __STM32F10x_I2C_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* I2C Init structure definition */ -typedef struct -{ - u16 I2C_Mode; - u16 I2C_DutyCycle; - u16 I2C_OwnAddress1; - u16 I2C_Ack; - u16 I2C_AcknowledgedAddress; - u32 I2C_ClockSpeed; -}I2C_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -#define IS_I2C_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == I2C1_BASE) || \ - ((*(u32*)&(PERIPH)) == I2C2_BASE)) - -/* I2C modes */ -#define I2C_Mode_I2C ((u16)0x0000) -#define I2C_Mode_SMBusDevice ((u16)0x0002) -#define I2C_Mode_SMBusHost ((u16)0x000A) - -#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ - ((MODE) == I2C_Mode_SMBusDevice) || \ - ((MODE) == I2C_Mode_SMBusHost)) -/* I2C duty cycle in fast mode */ -#define I2C_DutyCycle_16_9 ((u16)0x4000) -#define I2C_DutyCycle_2 ((u16)0xBFFF) - -#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \ - ((CYCLE) == I2C_DutyCycle_2)) - -/* I2C cknowledgementy */ -#define I2C_Ack_Enable ((u16)0x0400) -#define I2C_Ack_Disable ((u16)0x0000) - -#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \ - ((STATE) == I2C_Ack_Disable)) - -/* I2C transfer direction */ -#define I2C_Direction_Transmitter ((u8)0x00) -#define I2C_Direction_Receiver ((u8)0x01) - -#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ - ((DIRECTION) == I2C_Direction_Receiver)) - -/* I2C acknowledged address defines */ -#define I2C_AcknowledgedAddress_7bit ((u16)0x4000) -#define I2C_AcknowledgedAddress_10bit ((u16)0xC000) - -#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ - ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) - -/* I2C registers */ -#define I2C_Register_CR1 ((u8)0x00) -#define I2C_Register_CR2 ((u8)0x04) -#define I2C_Register_OAR1 ((u8)0x08) -#define I2C_Register_OAR2 ((u8)0x0C) -#define I2C_Register_DR ((u8)0x10) -#define I2C_Register_SR1 ((u8)0x14) -#define I2C_Register_SR2 ((u8)0x18) -#define I2C_Register_CCR ((u8)0x1C) -#define I2C_Register_TRISE ((u8)0x20) - -#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ - ((REGISTER) == I2C_Register_CR2) || \ - ((REGISTER) == I2C_Register_OAR1) || \ - ((REGISTER) == I2C_Register_OAR2) || \ - ((REGISTER) == I2C_Register_DR) || \ - ((REGISTER) == I2C_Register_SR1) || \ - ((REGISTER) == I2C_Register_SR2) || \ - ((REGISTER) == I2C_Register_CCR) || \ - ((REGISTER) == I2C_Register_TRISE)) - -/* I2C SMBus alert pin level */ -#define I2C_SMBusAlert_Low ((u16)0x2000) -#define I2C_SMBusAlert_High ((u16)0xDFFF) - -#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \ - ((ALERT) == I2C_SMBusAlert_High)) - -/* I2C PEC position */ -#define I2C_PECPosition_Next ((u16)0x0800) -#define I2C_PECPosition_Current ((u16)0xF7FF) - -#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \ - ((POSITION) == I2C_PECPosition_Current)) - -/* I2C interrupts definition */ -#define I2C_IT_BUF ((u16)0x0400) -#define I2C_IT_EVT ((u16)0x0200) -#define I2C_IT_ERR ((u16)0x0100) - -#define IS_I2C_CONFIG_IT(IT) ((((IT) & (u16)0xF8FF) == 0x00) && ((IT) != 0x00)) - -/* I2C interrupts definition */ -#define I2C_IT_SMBALERT ((u32)0x10008000) -#define I2C_IT_TIMEOUT ((u32)0x10004000) -#define I2C_IT_PECERR ((u32)0x10001000) -#define I2C_IT_OVR ((u32)0x10000800) -#define I2C_IT_AF ((u32)0x10000400) -#define I2C_IT_ARLO ((u32)0x10000200) -#define I2C_IT_BERR ((u32)0x10000100) -#define I2C_IT_TXE ((u32)0x00000080) -#define I2C_IT_RXNE ((u32)0x00000040) -#define I2C_IT_STOPF ((u32)0x60000010) -#define I2C_IT_ADD10 ((u32)0x20000008) -#define I2C_IT_BTF ((u32)0x60000004) -#define I2C_IT_ADDR ((u32)0xA0000002) -#define I2C_IT_SB ((u32)0x20000001) - -#define IS_I2C_CLEAR_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ - ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ - ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ - ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_STOPF) || \ - ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ - ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) - -#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ - ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ - ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ - ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \ - ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \ - ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ - ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) - -/* I2C flags definition */ -#define I2C_FLAG_DUALF ((u32)0x00800000) -#define I2C_FLAG_SMBHOST ((u32)0x00400000) -#define I2C_FLAG_SMBDEFAULT ((u32)0x00200000) -#define I2C_FLAG_GENCALL ((u32)0x00100000) -#define I2C_FLAG_TRA ((u32)0x00040000) -#define I2C_FLAG_BUSY ((u32)0x00020000) -#define I2C_FLAG_MSL ((u32)0x00010000) -#define I2C_FLAG_SMBALERT ((u32)0x10008000) -#define I2C_FLAG_TIMEOUT ((u32)0x10004000) -#define I2C_FLAG_PECERR ((u32)0x10001000) -#define I2C_FLAG_OVR ((u32)0x10000800) -#define I2C_FLAG_AF ((u32)0x10000400) -#define I2C_FLAG_ARLO ((u32)0x10000200) -#define I2C_FLAG_BERR ((u32)0x10000100) -#define I2C_FLAG_TXE ((u32)0x00000080) -#define I2C_FLAG_RXNE ((u32)0x00000040) -#define I2C_FLAG_STOPF ((u32)0x60000010) -#define I2C_FLAG_ADD10 ((u32)0x20000008) -#define I2C_FLAG_BTF ((u32)0x60000004) -#define I2C_FLAG_ADDR ((u32)0xA0000002) -#define I2C_FLAG_SB ((u32)0x20000001) - -#define IS_I2C_CLEAR_FLAG(FLAG) (((FLAG) == I2C_FLAG_SMBALERT) || ((FLAG) == I2C_FLAG_TIMEOUT) || \ - ((FLAG) == I2C_FLAG_PECERR) || ((FLAG) == I2C_FLAG_OVR) || \ - ((FLAG) == I2C_FLAG_AF) || ((FLAG) == I2C_FLAG_ARLO) || \ - ((FLAG) == I2C_FLAG_BERR) || ((FLAG) == I2C_FLAG_STOPF) || \ - ((FLAG) == I2C_FLAG_ADD10) || ((FLAG) == I2C_FLAG_BTF) || \ - ((FLAG) == I2C_FLAG_ADDR) || ((FLAG) == I2C_FLAG_SB)) - -#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \ - ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \ - ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \ - ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \ - ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \ - ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \ - ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \ - ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \ - ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \ - ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \ - ((FLAG) == I2C_FLAG_SB)) - -/* I2C Events */ -/* EV1 */ -#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((u32)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ -#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((u32)0x00020002) /* BUSY and ADDR flags */ -#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((u32)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ -#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((u32)0x00820000) /* DUALF and BUSY flags */ -#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((u32)0x00120000) /* GENCALL and BUSY flags */ - -/* EV2 */ -#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((u32)0x00020040) /* BUSY and RXNE flags */ - -/* EV3 */ -#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((u32)0x00060084) /* TRA, BUSY, TXE and BTF flags */ - -/* EV4 */ -#define I2C_EVENT_SLAVE_STOP_DETECTED ((u32)0x00000010) /* STOPF flag */ - -/* EV5 */ -#define I2C_EVENT_MASTER_MODE_SELECT ((u32)0x00030001) /* BUSY, MSL and SB flag */ - -/* EV6 */ -#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((u32)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ -#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((u32)0x00030002) /* BUSY, MSL and ADDR flags */ - -/* EV7 */ -#define I2C_EVENT_MASTER_BYTE_RECEIVED ((u32)0x00030040) /* BUSY, MSL and RXNE flags */ - -/* EV8 */ -#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((u32)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ - -/* EV9 */ -#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((u32)0x00030008) /* BUSY, MSL and ADD10 flags */ - -/* EV3_2 */ -#define I2C_EVENT_SLAVE_ACK_FAILURE ((u32)0x00000400) /* AF flag */ - -#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \ - ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \ - ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \ - ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \ - ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \ - ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE)) - -/* I2C own address1 -----------------------------------------------------------*/ -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) -/* I2C clock speed ------------------------------------------------------------*/ -#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void I2C_DeInit(I2C_TypeDef* I2Cx); -void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); -void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); -void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, u8 Address); -void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_ITConfig(I2C_TypeDef* I2Cx, u16 I2C_IT, FunctionalState NewState); -void I2C_SendData(I2C_TypeDef* I2Cx, u8 Data); -u8 I2C_ReceiveData(I2C_TypeDef* I2Cx); -void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, u8 Address, u8 I2C_Direction); -u16 I2C_ReadRegister(I2C_TypeDef* I2Cx, u8 I2C_Register); -void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, u16 I2C_SMBusAlert); -void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, u16 I2C_PECPosition); -void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); -u8 I2C_GetPEC(I2C_TypeDef* I2Cx); -void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, u16 I2C_DutyCycle); -u32 I2C_GetLastEvent(I2C_TypeDef* I2Cx); -ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, u32 I2C_EVENT); -FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, u32 I2C_FLAG); -void I2C_ClearFlag(I2C_TypeDef* I2Cx, u32 I2C_FLAG); -ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, u32 I2C_IT); -void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, u32 I2C_IT); - -#endif /*__STM32F10x_I2C_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_iwdg.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_iwdg.h deleted file mode 100755 index 0b71eae..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_iwdg.h +++ /dev/null @@ -1,69 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_iwdg.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* IWDG firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IWDG_H -#define __STM32F10x_IWDG_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Write access to IWDG_PR and IWDG_RLR registers */ -#define IWDG_WriteAccess_Enable ((u16)0x5555) -#define IWDG_WriteAccess_Disable ((u16)0x0000) - -#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \ - ((ACCESS) == IWDG_WriteAccess_Disable)) - -/* IWDG prescaler */ -#define IWDG_Prescaler_4 ((u8)0x00) -#define IWDG_Prescaler_8 ((u8)0x01) -#define IWDG_Prescaler_16 ((u8)0x02) -#define IWDG_Prescaler_32 ((u8)0x03) -#define IWDG_Prescaler_64 ((u8)0x04) -#define IWDG_Prescaler_128 ((u8)0x05) -#define IWDG_Prescaler_256 ((u8)0x06) - -#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \ - ((PRESCALER) == IWDG_Prescaler_8) || \ - ((PRESCALER) == IWDG_Prescaler_16) || \ - ((PRESCALER) == IWDG_Prescaler_32) || \ - ((PRESCALER) == IWDG_Prescaler_64) || \ - ((PRESCALER) == IWDG_Prescaler_128)|| \ - ((PRESCALER) == IWDG_Prescaler_256)) - -/* IWDG Flag */ -#define IWDG_FLAG_PVU ((u16)0x0001) -#define IWDG_FLAG_RVU ((u16)0x0002) - -#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU)) - -#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void IWDG_WriteAccessCmd(u16 IWDG_WriteAccess); -void IWDG_SetPrescaler(u8 IWDG_Prescaler); -void IWDG_SetReload(u16 Reload); -void IWDG_ReloadCounter(void); -void IWDG_Enable(void); -FlagStatus IWDG_GetFlagStatus(u16 IWDG_FLAG); - -#endif /* __STM32F10x_IWDG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_lib.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_lib.h deleted file mode 100755 index dfa3028..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_lib.h +++ /dev/null @@ -1,124 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_lib.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file includes the peripherals header files in the -* user application. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_LIB_H -#define __STM32F10x_LIB_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -#ifdef _ADC - #include "stm32f10x_adc.h" -#endif /*_ADC */ - -#ifdef _BKP - #include "stm32f10x_bkp.h" -#endif /*_BKP */ - -#ifdef _CAN - #include "stm32f10x_can.h" -#endif /*_CAN */ - -#ifdef _CRC - #include "stm32f10x_crc.h" -#endif /*_CRC */ - -#ifdef _DAC - #include "stm32f10x_dac.h" -#endif /*_DAC */ - -#ifdef _DBGMCU - #include "stm32f10x_dbgmcu.h" -#endif /*_DBGMCU */ - -#ifdef _DMA - #include "stm32f10x_dma.h" -#endif /*_DMA */ - -#ifdef _EXTI - #include "stm32f10x_exti.h" -#endif /*_EXTI */ - -#ifdef _FLASH - #include "stm32f10x_flash.h" -#endif /*_FLASH */ - -#ifdef _FSMC - #include "stm32f10x_fsmc.h" -#endif /*_FSMC */ - -#ifdef _GPIO - #include "stm32f10x_gpio.h" -#endif /*_GPIO */ - -#ifdef _I2C - #include "stm32f10x_i2c.h" -#endif /*_I2C */ - -#ifdef _IWDG - #include "stm32f10x_iwdg.h" -#endif /*_IWDG */ - -#ifdef _NVIC - #include "stm32f10x_nvic.h" -#endif /*_NVIC */ - -#ifdef _PWR - #include "stm32f10x_pwr.h" -#endif /*_PWR */ - -#ifdef _RCC - #include "stm32f10x_rcc.h" -#endif /*_RCC */ - -#ifdef _RTC - #include "stm32f10x_rtc.h" -#endif /*_RTC */ - -#ifdef _SDIO - #include "stm32f10x_sdio.h" -#endif /*_SDIO */ - -#ifdef _SPI - #include "stm32f10x_spi.h" -#endif /*_SPI */ - -#ifdef _SysTick - #include "stm32f10x_systick.h" -#endif /*_SysTick */ - -#ifdef _TIM - #include "stm32f10x_tim.h" -#endif /*_TIM */ - -#ifdef _USART - #include "stm32f10x_usart.h" -#endif /*_USART */ - -#ifdef _WWDG - #include "stm32f10x_wwdg.h" -#endif /*_WWDG */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void debug(void); - -#endif /* __STM32F10x_LIB_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_map.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_map.h deleted file mode 100755 index 506d1d2..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_map.h +++ /dev/null @@ -1,1187 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_map.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the peripheral register's definitions -* and memory mapping. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_MAP_H -#define __STM32F10x_MAP_H - -#ifndef EXT - #define EXT extern -#endif /* EXT */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_conf.h" -#include "stm32f10x_type.h" -#include "cortexm3_macro.h" - -/* Exported types ------------------------------------------------------------*/ -/******************************************************************************/ -/* Peripheral registers structures */ -/******************************************************************************/ - -/*------------------------ Analog to Digital Converter -----------------------*/ -typedef struct -{ - vu32 SR; - vu32 CR1; - vu32 CR2; - vu32 SMPR1; - vu32 SMPR2; - vu32 JOFR1; - vu32 JOFR2; - vu32 JOFR3; - vu32 JOFR4; - vu32 HTR; - vu32 LTR; - vu32 SQR1; - vu32 SQR2; - vu32 SQR3; - vu32 JSQR; - vu32 JDR1; - vu32 JDR2; - vu32 JDR3; - vu32 JDR4; - vu32 DR; -} ADC_TypeDef; - -/*------------------------ Backup Registers ----------------------------------*/ -typedef struct -{ - u32 RESERVED0; - vu16 DR1; - u16 RESERVED1; - vu16 DR2; - u16 RESERVED2; - vu16 DR3; - u16 RESERVED3; - vu16 DR4; - u16 RESERVED4; - vu16 DR5; - u16 RESERVED5; - vu16 DR6; - u16 RESERVED6; - vu16 DR7; - u16 RESERVED7; - vu16 DR8; - u16 RESERVED8; - vu16 DR9; - u16 RESERVED9; - vu16 DR10; - u16 RESERVED10; - vu16 RTCCR; - u16 RESERVED11; - vu16 CR; - u16 RESERVED12; - vu16 CSR; - u16 RESERVED13[5]; - vu16 DR11; - u16 RESERVED14; - vu16 DR12; - u16 RESERVED15; - vu16 DR13; - u16 RESERVED16; - vu16 DR14; - u16 RESERVED17; - vu16 DR15; - u16 RESERVED18; - vu16 DR16; - u16 RESERVED19; - vu16 DR17; - u16 RESERVED20; - vu16 DR18; - u16 RESERVED21; - vu16 DR19; - u16 RESERVED22; - vu16 DR20; - u16 RESERVED23; - vu16 DR21; - u16 RESERVED24; - vu16 DR22; - u16 RESERVED25; - vu16 DR23; - u16 RESERVED26; - vu16 DR24; - u16 RESERVED27; - vu16 DR25; - u16 RESERVED28; - vu16 DR26; - u16 RESERVED29; - vu16 DR27; - u16 RESERVED30; - vu16 DR28; - u16 RESERVED31; - vu16 DR29; - u16 RESERVED32; - vu16 DR30; - u16 RESERVED33; - vu16 DR31; - u16 RESERVED34; - vu16 DR32; - u16 RESERVED35; - vu16 DR33; - u16 RESERVED36; - vu16 DR34; - u16 RESERVED37; - vu16 DR35; - u16 RESERVED38; - vu16 DR36; - u16 RESERVED39; - vu16 DR37; - u16 RESERVED40; - vu16 DR38; - u16 RESERVED41; - vu16 DR39; - u16 RESERVED42; - vu16 DR40; - u16 RESERVED43; - vu16 DR41; - u16 RESERVED44; - vu16 DR42; - u16 RESERVED45; -} BKP_TypeDef; - -/*------------------------ Controller Area Network ---------------------------*/ -typedef struct -{ - vu32 TIR; - vu32 TDTR; - vu32 TDLR; - vu32 TDHR; -} CAN_TxMailBox_TypeDef; - -typedef struct -{ - vu32 RIR; - vu32 RDTR; - vu32 RDLR; - vu32 RDHR; -} CAN_FIFOMailBox_TypeDef; - -typedef struct -{ - vu32 FR1; - vu32 FR2; -} CAN_FilterRegister_TypeDef; - -typedef struct -{ - vu32 MCR; - vu32 MSR; - vu32 TSR; - vu32 RF0R; - vu32 RF1R; - vu32 IER; - vu32 ESR; - vu32 BTR; - u32 RESERVED0[88]; - CAN_TxMailBox_TypeDef sTxMailBox[3]; - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; - u32 RESERVED1[12]; - vu32 FMR; - vu32 FM1R; - u32 RESERVED2; - vu32 FS1R; - u32 RESERVED3; - vu32 FFA1R; - u32 RESERVED4; - vu32 FA1R; - u32 RESERVED5[8]; - CAN_FilterRegister_TypeDef sFilterRegister[14]; -} CAN_TypeDef; - -/*------------------------ CRC calculation unit ------------------------------*/ -typedef struct -{ - vu32 DR; - vu8 IDR; - u8 RESERVED0; - u16 RESERVED1; - vu32 CR; -} CRC_TypeDef; - - -/*------------------------ Digital to Analog Converter -----------------------*/ -typedef struct -{ - vu32 CR; - vu32 SWTRIGR; - vu32 DHR12R1; - vu32 DHR12L1; - vu32 DHR8R1; - vu32 DHR12R2; - vu32 DHR12L2; - vu32 DHR8R2; - vu32 DHR12RD; - vu32 DHR12LD; - vu32 DHR8RD; - vu32 DOR1; - vu32 DOR2; -} DAC_TypeDef; - -/*------------------------ Debug MCU -----------------------------------------*/ -typedef struct -{ - vu32 IDCODE; - vu32 CR; -}DBGMCU_TypeDef; - -/*------------------------ DMA Controller ------------------------------------*/ -typedef struct -{ - vu32 CCR; - vu32 CNDTR; - vu32 CPAR; - vu32 CMAR; -} DMA_Channel_TypeDef; - -typedef struct -{ - vu32 ISR; - vu32 IFCR; -} DMA_TypeDef; - -/*------------------------ External Interrupt/Event Controller ---------------*/ -typedef struct -{ - vu32 IMR; - vu32 EMR; - vu32 RTSR; - vu32 FTSR; - vu32 SWIER; - vu32 PR; -} EXTI_TypeDef; - -/*------------------------ FLASH and Option Bytes Registers ------------------*/ -typedef struct -{ - vu32 ACR; - vu32 KEYR; - vu32 OPTKEYR; - vu32 SR; - vu32 CR; - vu32 AR; - vu32 RESERVED; - vu32 OBR; - vu32 WRPR; -} FLASH_TypeDef; - -typedef struct -{ - vu16 RDP; - vu16 USER; - vu16 Data0; - vu16 Data1; - vu16 WRP0; - vu16 WRP1; - vu16 WRP2; - vu16 WRP3; -} OB_TypeDef; - -/*------------------------ Flexible Static Memory Controller -----------------*/ -typedef struct -{ - vu32 BTCR[8]; -} FSMC_Bank1_TypeDef; - -typedef struct -{ - vu32 BWTR[7]; -} FSMC_Bank1E_TypeDef; - -typedef struct -{ - vu32 PCR2; - vu32 SR2; - vu32 PMEM2; - vu32 PATT2; - u32 RESERVED0; - vu32 ECCR2; -} FSMC_Bank2_TypeDef; - -typedef struct -{ - vu32 PCR3; - vu32 SR3; - vu32 PMEM3; - vu32 PATT3; - u32 RESERVED0; - vu32 ECCR3; -} FSMC_Bank3_TypeDef; - -typedef struct -{ - vu32 PCR4; - vu32 SR4; - vu32 PMEM4; - vu32 PATT4; - vu32 PIO4; -} FSMC_Bank4_TypeDef; - -/*------------------------ General Purpose and Alternate Function IO ---------*/ -typedef struct -{ - vu32 CRL; - vu32 CRH; - vu32 IDR; - vu32 ODR; - vu32 BSRR; - vu32 BRR; - vu32 LCKR; -} GPIO_TypeDef; - -typedef struct -{ - vu32 EVCR; - vu32 MAPR; - vu32 EXTICR[4]; -} AFIO_TypeDef; - -/*------------------------ Inter-integrated Circuit Interface ----------------*/ -typedef struct -{ - vu16 CR1; - u16 RESERVED0; - vu16 CR2; - u16 RESERVED1; - vu16 OAR1; - u16 RESERVED2; - vu16 OAR2; - u16 RESERVED3; - vu16 DR; - u16 RESERVED4; - vu16 SR1; - u16 RESERVED5; - vu16 SR2; - u16 RESERVED6; - vu16 CCR; - u16 RESERVED7; - vu16 TRISE; - u16 RESERVED8; -} I2C_TypeDef; - -/*------------------------ Independent WATCHDOG ------------------------------*/ -typedef struct -{ - vu32 KR; - vu32 PR; - vu32 RLR; - vu32 SR; -} IWDG_TypeDef; - -/*------------------------ Nested Vectored Interrupt Controller --------------*/ -typedef struct -{ - vu32 ISER[2]; - u32 RESERVED0[30]; - vu32 ICER[2]; - u32 RSERVED1[30]; - vu32 ISPR[2]; - u32 RESERVED2[30]; - vu32 ICPR[2]; - u32 RESERVED3[30]; - vu32 IABR[2]; - u32 RESERVED4[62]; - vu32 IPR[15]; -} NVIC_TypeDef; - -typedef struct -{ - vuc32 CPUID; - vu32 ICSR; - vu32 VTOR; - vu32 AIRCR; - vu32 SCR; - vu32 CCR; - vu32 SHPR[3]; - vu32 SHCSR; - vu32 CFSR; - vu32 HFSR; - vu32 DFSR; - vu32 MMFAR; - vu32 BFAR; - vu32 AFSR; -} SCB_TypeDef; - -/*------------------------ Power Control -------------------------------------*/ -typedef struct -{ - vu32 CR; - vu32 CSR; -} PWR_TypeDef; - -/*------------------------ Reset and Clock Control ---------------------------*/ -typedef struct -{ - vu32 CR; - vu32 CFGR; - vu32 CIR; - vu32 APB2RSTR; - vu32 APB1RSTR; - vu32 AHBENR; - vu32 APB2ENR; - vu32 APB1ENR; - vu32 BDCR; - vu32 CSR; -} RCC_TypeDef; - -/*------------------------ Real-Time Clock -----------------------------------*/ -typedef struct -{ - vu16 CRH; - u16 RESERVED0; - vu16 CRL; - u16 RESERVED1; - vu16 PRLH; - u16 RESERVED2; - vu16 PRLL; - u16 RESERVED3; - vu16 DIVH; - u16 RESERVED4; - vu16 DIVL; - u16 RESERVED5; - vu16 CNTH; - u16 RESERVED6; - vu16 CNTL; - u16 RESERVED7; - vu16 ALRH; - u16 RESERVED8; - vu16 ALRL; - u16 RESERVED9; -} RTC_TypeDef; - -/*------------------------ SD host Interface ---------------------------------*/ -typedef struct -{ - vu32 POWER; - vu32 CLKCR; - vu32 ARG; - vu32 CMD; - vuc32 RESPCMD; - vuc32 RESP1; - vuc32 RESP2; - vuc32 RESP3; - vuc32 RESP4; - vu32 DTIMER; - vu32 DLEN; - vu32 DCTRL; - vuc32 DCOUNT; - vuc32 STA; - vu32 ICR; - vu32 MASK; - u32 RESERVED0[2]; - vuc32 FIFOCNT; - u32 RESERVED1[13]; - vu32 FIFO; -} SDIO_TypeDef; - -/*------------------------ Serial Peripheral Interface -----------------------*/ -typedef struct -{ - vu16 CR1; - u16 RESERVED0; - vu16 CR2; - u16 RESERVED1; - vu16 SR; - u16 RESERVED2; - vu16 DR; - u16 RESERVED3; - vu16 CRCPR; - u16 RESERVED4; - vu16 RXCRCR; - u16 RESERVED5; - vu16 TXCRCR; - u16 RESERVED6; - vu16 I2SCFGR; - u16 RESERVED7; - vu16 I2SPR; - u16 RESERVED8; -} SPI_TypeDef; - -/*------------------------ SystemTick ----------------------------------------*/ -typedef struct -{ - vu32 CTRL; - vu32 LOAD; - vu32 VAL; - vuc32 CALIB; -} SysTick_TypeDef; - -/*------------------------ TIM -----------------------------------------------*/ -typedef struct -{ - vu16 CR1; - u16 RESERVED0; - vu16 CR2; - u16 RESERVED1; - vu16 SMCR; - u16 RESERVED2; - vu16 DIER; - u16 RESERVED3; - vu16 SR; - u16 RESERVED4; - vu16 EGR; - u16 RESERVED5; - vu16 CCMR1; - u16 RESERVED6; - vu16 CCMR2; - u16 RESERVED7; - vu16 CCER; - u16 RESERVED8; - vu16 CNT; - u16 RESERVED9; - vu16 PSC; - u16 RESERVED10; - vu16 ARR; - u16 RESERVED11; - vu16 RCR; - u16 RESERVED12; - vu16 CCR1; - u16 RESERVED13; - vu16 CCR2; - u16 RESERVED14; - vu16 CCR3; - u16 RESERVED15; - vu16 CCR4; - u16 RESERVED16; - vu16 BDTR; - u16 RESERVED17; - vu16 DCR; - u16 RESERVED18; - vu16 DMAR; - u16 RESERVED19; -} TIM_TypeDef; - -/*----------------- Universal Synchronous Asynchronous Receiver Transmitter --*/ -typedef struct -{ - vu16 SR; - u16 RESERVED0; - vu16 DR; - u16 RESERVED1; - vu16 BRR; - u16 RESERVED2; - vu16 CR1; - u16 RESERVED3; - vu16 CR2; - u16 RESERVED4; - vu16 CR3; - u16 RESERVED5; - vu16 GTPR; - u16 RESERVED6; -} USART_TypeDef; - -/*------------------------ Window WATCHDOG -----------------------------------*/ -typedef struct -{ - vu32 CR; - vu32 CFR; - vu32 SR; -} WWDG_TypeDef; - -/******************************************************************************/ -/* Peripheral memory map */ -/******************************************************************************/ -/* Peripheral and SRAM base address in the alias region */ -#define PERIPH_BB_BASE ((u32)0x42000000) -#define SRAM_BB_BASE ((u32)0x22000000) - -/* Peripheral and SRAM base address in the bit-band region */ -#define SRAM_BASE ((u32)0x20000000) -#define PERIPH_BASE ((u32)0x40000000) - -/* FSMC registers base address */ -#define FSMC_R_BASE ((u32)0xA0000000) - -/* Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) -#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) - -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) -#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) -#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) -#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) -#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) -#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) -#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400) -#define USART3_BASE (APB1PERIPH_BASE + 0x4800) -#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) -#define UART5_BASE (APB1PERIPH_BASE + 0x5000) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) -#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) -#define CAN_BASE (APB1PERIPH_BASE + 0x6400) -#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000) -#define DAC_BASE (APB1PERIPH_BASE + 0x7400) - -#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) -#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) -#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) -#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) -#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) -#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) -#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) -#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) -#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) -#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) -#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) -#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) -#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) -#define USART1_BASE (APB2PERIPH_BASE + 0x3800) -#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) - -#define SDIO_BASE (PERIPH_BASE + 0x18000) - -#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) -#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) -#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) -#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) -#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) -#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) -#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) -#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) -#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) -#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) -#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) -#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) -#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) -#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) -#define RCC_BASE (AHBPERIPH_BASE + 0x1000) -#define CRC_BASE (AHBPERIPH_BASE + 0x3000) - -/* Flash registers base address */ -#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) -/* Flash Option Bytes base address */ -#define OB_BASE ((u32)0x1FFFF800) - -/* FSMC Bankx registers base address */ -#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) -#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) -#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) -#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) -#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) - -/* Debug MCU registers base address */ -#define DBGMCU_BASE ((u32)0xE0042000) - -/* System Control Space memory map */ -#define SCS_BASE ((u32)0xE000E000) - -#define SysTick_BASE (SCS_BASE + 0x0010) -#define NVIC_BASE (SCS_BASE + 0x0100) -#define SCB_BASE (SCS_BASE + 0x0D00) - -/******************************************************************************/ -/* Peripheral declaration */ -/******************************************************************************/ - -/*------------------------ Non Debug Mode ------------------------------------*/ -#ifndef DEBUG -#ifdef _TIM2 - #define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#endif /*_TIM2 */ - -#ifdef _TIM3 - #define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#endif /*_TIM3 */ - -#ifdef _TIM4 - #define TIM4 ((TIM_TypeDef *) TIM4_BASE) -#endif /*_TIM4 */ - -#ifdef _TIM5 - #define TIM5 ((TIM_TypeDef *) TIM5_BASE) -#endif /*_TIM5 */ - -#ifdef _TIM6 - #define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#endif /*_TIM6 */ - -#ifdef _TIM7 - #define TIM7 ((TIM_TypeDef *) TIM7_BASE) -#endif /*_TIM7 */ - -#ifdef _RTC - #define RTC ((RTC_TypeDef *) RTC_BASE) -#endif /*_RTC */ - -#ifdef _WWDG - #define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#endif /*_WWDG */ - -#ifdef _IWDG - #define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#endif /*_IWDG */ - -#ifdef _SPI2 - #define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#endif /*_SPI2 */ - -#ifdef _SPI3 - #define SPI3 ((SPI_TypeDef *) SPI3_BASE) -#endif /*_SPI3 */ - -#ifdef _USART2 - #define USART2 ((USART_TypeDef *) USART2_BASE) -#endif /*_USART2 */ - -#ifdef _USART3 - #define USART3 ((USART_TypeDef *) USART3_BASE) -#endif /*_USART3 */ - -#ifdef _UART4 - #define UART4 ((USART_TypeDef *) UART4_BASE) -#endif /*_UART4 */ - -#ifdef _UART5 - #define UART5 ((USART_TypeDef *) UART5_BASE) -#endif /*_USART5 */ - -#ifdef _I2C1 - #define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#endif /*_I2C1 */ - -#ifdef _I2C2 - #define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#endif /*_I2C2 */ - -#ifdef _CAN - #define CAN ((CAN_TypeDef *) CAN_BASE) -#endif /*_CAN */ - -#ifdef _BKP - #define BKP ((BKP_TypeDef *) BKP_BASE) -#endif /*_BKP */ - -#ifdef _PWR - #define PWR ((PWR_TypeDef *) PWR_BASE) -#endif /*_PWR */ - -#ifdef _DAC - #define DAC ((DAC_TypeDef *) DAC_BASE) -#endif /*_DAC */ - -#ifdef _AFIO - #define AFIO ((AFIO_TypeDef *) AFIO_BASE) -#endif /*_AFIO */ - -#ifdef _EXTI - #define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#endif /*_EXTI */ - -#ifdef _GPIOA - #define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#endif /*_GPIOA */ - -#ifdef _GPIOB - #define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#endif /*_GPIOB */ - -#ifdef _GPIOC - #define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#endif /*_GPIOC */ - -#ifdef _GPIOD - #define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#endif /*_GPIOD */ - -#ifdef _GPIOE - #define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#endif /*_GPIOE */ - -#ifdef _GPIOF - #define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#endif /*_GPIOF */ - -#ifdef _GPIOG - #define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#endif /*_GPIOG */ - -#ifdef _ADC1 - #define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#endif /*_ADC1 */ - -#ifdef _ADC2 - #define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#endif /*_ADC2 */ - -#ifdef _TIM1 - #define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#endif /*_TIM1 */ - -#ifdef _SPI1 - #define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#endif /*_SPI1 */ - -#ifdef _TIM8 - #define TIM8 ((TIM_TypeDef *) TIM8_BASE) -#endif /*_TIM8 */ - -#ifdef _USART1 - #define USART1 ((USART_TypeDef *) USART1_BASE) -#endif /*_USART1 */ - -#ifdef _ADC3 - #define ADC3 ((ADC_TypeDef *) ADC3_BASE) -#endif /*_ADC3 */ - -#ifdef _SDIO - #define SDIO ((SDIO_TypeDef *) SDIO_BASE) -#endif /*_SDIO */ - -#ifdef _DMA - #define DMA1 ((DMA_TypeDef *) DMA1_BASE) - #define DMA2 ((DMA_TypeDef *) DMA2_BASE) -#endif /*_DMA */ - -#ifdef _DMA1_Channel1 - #define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) -#endif /*_DMA1_Channel1 */ - -#ifdef _DMA1_Channel2 - #define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) -#endif /*_DMA1_Channel2 */ - -#ifdef _DMA1_Channel3 - #define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) -#endif /*_DMA1_Channel3 */ - -#ifdef _DMA1_Channel4 - #define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) -#endif /*_DMA1_Channel4 */ - -#ifdef _DMA1_Channel5 - #define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) -#endif /*_DMA1_Channel5 */ - -#ifdef _DMA1_Channel6 - #define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) -#endif /*_DMA1_Channel6 */ - -#ifdef _DMA1_Channel7 - #define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) -#endif /*_DMA1_Channel7 */ - -#ifdef _DMA2_Channel1 - #define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) -#endif /*_DMA2_Channel1 */ - -#ifdef _DMA2_Channel2 - #define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) -#endif /*_DMA2_Channel2 */ - -#ifdef _DMA2_Channel3 - #define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) -#endif /*_DMA2_Channel3 */ - -#ifdef _DMA2_Channel4 - #define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) -#endif /*_DMA2_Channel4 */ - -#ifdef _DMA2_Channel5 - #define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) -#endif /*_DMA2_Channel5 */ - -#ifdef _RCC - #define RCC ((RCC_TypeDef *) RCC_BASE) -#endif /*_RCC */ - -#ifdef _CRC - #define CRC ((CRC_TypeDef *) CRC_BASE) -#endif /*_CRC */ - -#ifdef _FLASH - #define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) - #define OB ((OB_TypeDef *) OB_BASE) -#endif /*_FLASH */ - -#ifdef _FSMC - #define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) - #define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) - #define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) - #define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) - #define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) -#endif /*_FSMC */ - -#ifdef _DBGMCU - #define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) -#endif /*_DBGMCU */ - -#ifdef _SysTick - #define SysTick ((SysTick_TypeDef *) SysTick_BASE) -#endif /*_SysTick */ - -#ifdef _NVIC - #define NVIC ((NVIC_TypeDef *) NVIC_BASE) - #define SCB ((SCB_TypeDef *) SCB_BASE) -#endif /*_NVIC */ - -/*------------------------ Debug Mode ----------------------------------------*/ -#else /* DEBUG */ -#ifdef _TIM2 - EXT TIM_TypeDef *TIM2; -#endif /*_TIM2 */ - -#ifdef _TIM3 - EXT TIM_TypeDef *TIM3; -#endif /*_TIM3 */ - -#ifdef _TIM4 - EXT TIM_TypeDef *TIM4; -#endif /*_TIM4 */ - -#ifdef _TIM5 - EXT TIM_TypeDef *TIM5; -#endif /*_TIM5 */ - -#ifdef _TIM6 - EXT TIM_TypeDef *TIM6; -#endif /*_TIM6 */ - -#ifdef _TIM7 - EXT TIM_TypeDef *TIM7; -#endif /*_TIM7 */ - -#ifdef _RTC - EXT RTC_TypeDef *RTC; -#endif /*_RTC */ - -#ifdef _WWDG - EXT WWDG_TypeDef *WWDG; -#endif /*_WWDG */ - -#ifdef _IWDG - EXT IWDG_TypeDef *IWDG; -#endif /*_IWDG */ - -#ifdef _SPI2 - EXT SPI_TypeDef *SPI2; -#endif /*_SPI2 */ - -#ifdef _SPI3 - EXT SPI_TypeDef *SPI3; -#endif /*_SPI3 */ - -#ifdef _USART2 - EXT USART_TypeDef *USART2; -#endif /*_USART2 */ - -#ifdef _USART3 - EXT USART_TypeDef *USART3; -#endif /*_USART3 */ - -#ifdef _UART4 - EXT USART_TypeDef *UART4; -#endif /*_UART4 */ - -#ifdef _UART5 - EXT USART_TypeDef *UART5; -#endif /*_UART5 */ - -#ifdef _I2C1 - EXT I2C_TypeDef *I2C1; -#endif /*_I2C1 */ - -#ifdef _I2C2 - EXT I2C_TypeDef *I2C2; -#endif /*_I2C2 */ - -#ifdef _CAN - EXT CAN_TypeDef *CAN; -#endif /*_CAN */ - -#ifdef _BKP - EXT BKP_TypeDef *BKP; -#endif /*_BKP */ - -#ifdef _PWR - EXT PWR_TypeDef *PWR; -#endif /*_PWR */ - -#ifdef _DAC - EXT DAC_TypeDef *DAC; -#endif /*_DAC */ - -#ifdef _AFIO - EXT AFIO_TypeDef *AFIO; -#endif /*_AFIO */ - -#ifdef _EXTI - EXT EXTI_TypeDef *EXTI; -#endif /*_EXTI */ - -#ifdef _GPIOA - EXT GPIO_TypeDef *GPIOA; -#endif /*_GPIOA */ - -#ifdef _GPIOB - EXT GPIO_TypeDef *GPIOB; -#endif /*_GPIOB */ - -#ifdef _GPIOC - EXT GPIO_TypeDef *GPIOC; -#endif /*_GPIOC */ - -#ifdef _GPIOD - EXT GPIO_TypeDef *GPIOD; -#endif /*_GPIOD */ - -#ifdef _GPIOE - EXT GPIO_TypeDef *GPIOE; -#endif /*_GPIOE */ - -#ifdef _GPIOF - EXT GPIO_TypeDef *GPIOF; -#endif /*_GPIOF */ - -#ifdef _GPIOG - EXT GPIO_TypeDef *GPIOG; -#endif /*_GPIOG */ - -#ifdef _ADC1 - EXT ADC_TypeDef *ADC1; -#endif /*_ADC1 */ - -#ifdef _ADC2 - EXT ADC_TypeDef *ADC2; -#endif /*_ADC2 */ - -#ifdef _TIM1 - EXT TIM_TypeDef *TIM1; -#endif /*_TIM1 */ - -#ifdef _SPI1 - EXT SPI_TypeDef *SPI1; -#endif /*_SPI1 */ - -#ifdef _TIM8 - EXT TIM_TypeDef *TIM8; -#endif /*_TIM8 */ - -#ifdef _USART1 - EXT USART_TypeDef *USART1; -#endif /*_USART1 */ - -#ifdef _ADC3 - EXT ADC_TypeDef *ADC3; -#endif /*_ADC3 */ - -#ifdef _SDIO - EXT SDIO_TypeDef *SDIO; -#endif /*_SDIO */ - -#ifdef _DMA - EXT DMA_TypeDef *DMA1; - EXT DMA_TypeDef *DMA2; -#endif /*_DMA */ - -#ifdef _DMA1_Channel1 - EXT DMA_Channel_TypeDef *DMA1_Channel1; -#endif /*_DMA1_Channel1 */ - -#ifdef _DMA1_Channel2 - EXT DMA_Channel_TypeDef *DMA1_Channel2; -#endif /*_DMA1_Channel2 */ - -#ifdef _DMA1_Channel3 - EXT DMA_Channel_TypeDef *DMA1_Channel3; -#endif /*_DMA1_Channel3 */ - -#ifdef _DMA1_Channel4 - EXT DMA_Channel_TypeDef *DMA1_Channel4; -#endif /*_DMA1_Channel4 */ - -#ifdef _DMA1_Channel5 - EXT DMA_Channel_TypeDef *DMA1_Channel5; -#endif /*_DMA1_Channel5 */ - -#ifdef _DMA1_Channel6 - EXT DMA_Channel_TypeDef *DMA1_Channel6; -#endif /*_DMA1_Channel6 */ - -#ifdef _DMA1_Channel7 - EXT DMA_Channel_TypeDef *DMA1_Channel7; -#endif /*_DMA1_Channel7 */ - -#ifdef _DMA2_Channel1 - EXT DMA_Channel_TypeDef *DMA2_Channel1; -#endif /*_DMA2_Channel1 */ - -#ifdef _DMA2_Channel2 - EXT DMA_Channel_TypeDef *DMA2_Channel2; -#endif /*_DMA2_Channel2 */ - -#ifdef _DMA2_Channel3 - EXT DMA_Channel_TypeDef *DMA2_Channel3; -#endif /*_DMA2_Channel3 */ - -#ifdef _DMA2_Channel4 - EXT DMA_Channel_TypeDef *DMA2_Channel4; -#endif /*_DMA2_Channel4 */ - -#ifdef _DMA2_Channel5 - EXT DMA_Channel_TypeDef *DMA2_Channel5; -#endif /*_DMA2_Channel5 */ - -#ifdef _RCC - EXT RCC_TypeDef *RCC; -#endif /*_RCC */ - -#ifdef _CRC - EXT CRC_TypeDef *CRC; -#endif /*_CRC */ - -#ifdef _FLASH - EXT FLASH_TypeDef *FLASH; - EXT OB_TypeDef *OB; -#endif /*_FLASH */ - -#ifdef _FSMC - EXT FSMC_Bank1_TypeDef *FSMC_Bank1; - EXT FSMC_Bank1E_TypeDef *FSMC_Bank1E; - EXT FSMC_Bank2_TypeDef *FSMC_Bank2; - EXT FSMC_Bank3_TypeDef *FSMC_Bank3; - EXT FSMC_Bank4_TypeDef *FSMC_Bank4; -#endif /*_FSMC */ - -#ifdef _DBGMCU - EXT DBGMCU_TypeDef *DBGMCU; -#endif /*_DBGMCU */ - -#ifdef _SysTick - EXT SysTick_TypeDef *SysTick; -#endif /*_SysTick */ - -#ifdef _NVIC - EXT NVIC_TypeDef *NVIC; - EXT SCB_TypeDef *SCB; -#endif /*_NVIC */ - -#endif /* DEBUG */ - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __STM32F10x_MAP_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_nvic.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_nvic.h deleted file mode 100755 index be60c08..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_nvic.h +++ /dev/null @@ -1,287 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_nvic.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* NVIC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_NVIC_H -#define __STM32F10x_NVIC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* NVIC Init Structure definition */ -typedef struct -{ - u8 NVIC_IRQChannel; - u8 NVIC_IRQChannelPreemptionPriority; - u8 NVIC_IRQChannelSubPriority; - FunctionalState NVIC_IRQChannelCmd; -} NVIC_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* IRQ Channels --------------------------------------------------------------*/ -#define WWDG_IRQChannel ((u8)0x00) /* Window WatchDog Interrupt */ -#define PVD_IRQChannel ((u8)0x01) /* PVD through EXTI Line detection Interrupt */ -#define TAMPER_IRQChannel ((u8)0x02) /* Tamper Interrupt */ -#define RTC_IRQChannel ((u8)0x03) /* RTC global Interrupt */ -#define FLASH_IRQChannel ((u8)0x04) /* FLASH global Interrupt */ -#define RCC_IRQChannel ((u8)0x05) /* RCC global Interrupt */ -#define EXTI0_IRQChannel ((u8)0x06) /* EXTI Line0 Interrupt */ -#define EXTI1_IRQChannel ((u8)0x07) /* EXTI Line1 Interrupt */ -#define EXTI2_IRQChannel ((u8)0x08) /* EXTI Line2 Interrupt */ -#define EXTI3_IRQChannel ((u8)0x09) /* EXTI Line3 Interrupt */ -#define EXTI4_IRQChannel ((u8)0x0A) /* EXTI Line4 Interrupt */ -#define DMA1_Channel1_IRQChannel ((u8)0x0B) /* DMA1 Channel 1 global Interrupt */ -#define DMA1_Channel2_IRQChannel ((u8)0x0C) /* DMA1 Channel 2 global Interrupt */ -#define DMA1_Channel3_IRQChannel ((u8)0x0D) /* DMA1 Channel 3 global Interrupt */ -#define DMA1_Channel4_IRQChannel ((u8)0x0E) /* DMA1 Channel 4 global Interrupt */ -#define DMA1_Channel5_IRQChannel ((u8)0x0F) /* DMA1 Channel 5 global Interrupt */ -#define DMA1_Channel6_IRQChannel ((u8)0x10) /* DMA1 Channel 6 global Interrupt */ -#define DMA1_Channel7_IRQChannel ((u8)0x11) /* DMA1 Channel 7 global Interrupt */ -#define ADC1_2_IRQChannel ((u8)0x12) /* ADC1 et ADC2 global Interrupt */ -#define USB_HP_CAN_TX_IRQChannel ((u8)0x13) /* USB High Priority or CAN TX Interrupts */ -#define USB_LP_CAN_RX0_IRQChannel ((u8)0x14) /* USB Low Priority or CAN RX0 Interrupts */ -#define CAN_RX1_IRQChannel ((u8)0x15) /* CAN RX1 Interrupt */ -#define CAN_SCE_IRQChannel ((u8)0x16) /* CAN SCE Interrupt */ -#define EXTI9_5_IRQChannel ((u8)0x17) /* External Line[9:5] Interrupts */ -#define TIM1_BRK_IRQChannel ((u8)0x18) /* TIM1 Break Interrupt */ -#define TIM1_UP_IRQChannel ((u8)0x19) /* TIM1 Update Interrupt */ -#define TIM1_TRG_COM_IRQChannel ((u8)0x1A) /* TIM1 Trigger and Commutation Interrupt */ -#define TIM1_CC_IRQChannel ((u8)0x1B) /* TIM1 Capture Compare Interrupt */ -#define TIM2_IRQChannel ((u8)0x1C) /* TIM2 global Interrupt */ -#define TIM3_IRQChannel ((u8)0x1D) /* TIM3 global Interrupt */ -#define TIM4_IRQChannel ((u8)0x1E) /* TIM4 global Interrupt */ -#define I2C1_EV_IRQChannel ((u8)0x1F) /* I2C1 Event Interrupt */ -#define I2C1_ER_IRQChannel ((u8)0x20) /* I2C1 Error Interrupt */ -#define I2C2_EV_IRQChannel ((u8)0x21) /* I2C2 Event Interrupt */ -#define I2C2_ER_IRQChannel ((u8)0x22) /* I2C2 Error Interrupt */ -#define SPI1_IRQChannel ((u8)0x23) /* SPI1 global Interrupt */ -#define SPI2_IRQChannel ((u8)0x24) /* SPI2 global Interrupt */ -#define USART1_IRQChannel ((u8)0x25) /* USART1 global Interrupt */ -#define USART2_IRQChannel ((u8)0x26) /* USART2 global Interrupt */ -#define USART3_IRQChannel ((u8)0x27) /* USART3 global Interrupt */ -#define EXTI15_10_IRQChannel ((u8)0x28) /* External Line[15:10] Interrupts */ -#define RTCAlarm_IRQChannel ((u8)0x29) /* RTC Alarm through EXTI Line Interrupt */ -#define USBWakeUp_IRQChannel ((u8)0x2A) /* USB WakeUp from suspend through EXTI Line Interrupt */ -#define TIM8_BRK_IRQChannel ((u8)0x2B) /* TIM8 Break Interrupt */ -#define TIM8_UP_IRQChannel ((u8)0x2C) /* TIM8 Update Interrupt */ -#define TIM8_TRG_COM_IRQChannel ((u8)0x2D) /* TIM8 Trigger and Commutation Interrupt */ -#define TIM8_CC_IRQChannel ((u8)0x2E) /* TIM8 Capture Compare Interrupt */ -#define ADC3_IRQChannel ((u8)0x2F) /* ADC3 global Interrupt */ -#define FSMC_IRQChannel ((u8)0x30) /* FSMC global Interrupt */ -#define SDIO_IRQChannel ((u8)0x31) /* SDIO global Interrupt */ -#define TIM5_IRQChannel ((u8)0x32) /* TIM5 global Interrupt */ -#define SPI3_IRQChannel ((u8)0x33) /* SPI3 global Interrupt */ -#define UART4_IRQChannel ((u8)0x34) /* UART4 global Interrupt */ -#define UART5_IRQChannel ((u8)0x35) /* UART5 global Interrupt */ -#define TIM6_IRQChannel ((u8)0x36) /* TIM6 global Interrupt */ -#define TIM7_IRQChannel ((u8)0x37) /* TIM7 global Interrupt */ -#define DMA2_Channel1_IRQChannel ((u8)0x38) /* DMA2 Channel 1 global Interrupt */ -#define DMA2_Channel2_IRQChannel ((u8)0x39) /* DMA2 Channel 2 global Interrupt */ -#define DMA2_Channel3_IRQChannel ((u8)0x3A) /* DMA2 Channel 3 global Interrupt */ -#define DMA2_Channel4_5_IRQChannel ((u8)0x3B) /* DMA2 Channel 4 and DMA2 Channel 5 global Interrupt */ - - -#define IS_NVIC_IRQ_CHANNEL(CHANNEL) (((CHANNEL) == WWDG_IRQChannel) || \ - ((CHANNEL) == PVD_IRQChannel) || \ - ((CHANNEL) == TAMPER_IRQChannel) || \ - ((CHANNEL) == RTC_IRQChannel) || \ - ((CHANNEL) == FLASH_IRQChannel) || \ - ((CHANNEL) == RCC_IRQChannel) || \ - ((CHANNEL) == EXTI0_IRQChannel) || \ - ((CHANNEL) == EXTI1_IRQChannel) || \ - ((CHANNEL) == EXTI2_IRQChannel) || \ - ((CHANNEL) == EXTI3_IRQChannel) || \ - ((CHANNEL) == EXTI4_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel1_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel2_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel3_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel4_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel5_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel6_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel7_IRQChannel) || \ - ((CHANNEL) == ADC1_2_IRQChannel) || \ - ((CHANNEL) == USB_HP_CAN_TX_IRQChannel) || \ - ((CHANNEL) == USB_LP_CAN_RX0_IRQChannel) || \ - ((CHANNEL) == CAN_RX1_IRQChannel) || \ - ((CHANNEL) == CAN_SCE_IRQChannel) || \ - ((CHANNEL) == EXTI9_5_IRQChannel) || \ - ((CHANNEL) == TIM1_BRK_IRQChannel) || \ - ((CHANNEL) == TIM1_UP_IRQChannel) || \ - ((CHANNEL) == TIM1_TRG_COM_IRQChannel) || \ - ((CHANNEL) == TIM1_CC_IRQChannel) || \ - ((CHANNEL) == TIM2_IRQChannel) || \ - ((CHANNEL) == TIM3_IRQChannel) || \ - ((CHANNEL) == TIM4_IRQChannel) || \ - ((CHANNEL) == I2C1_EV_IRQChannel) || \ - ((CHANNEL) == I2C1_ER_IRQChannel) || \ - ((CHANNEL) == I2C2_EV_IRQChannel) || \ - ((CHANNEL) == I2C2_ER_IRQChannel) || \ - ((CHANNEL) == SPI1_IRQChannel) || \ - ((CHANNEL) == SPI2_IRQChannel) || \ - ((CHANNEL) == USART1_IRQChannel) || \ - ((CHANNEL) == USART2_IRQChannel) || \ - ((CHANNEL) == USART3_IRQChannel) || \ - ((CHANNEL) == EXTI15_10_IRQChannel) || \ - ((CHANNEL) == RTCAlarm_IRQChannel) || \ - ((CHANNEL) == USBWakeUp_IRQChannel) || \ - ((CHANNEL) == TIM8_BRK_IRQChannel) || \ - ((CHANNEL) == TIM8_UP_IRQChannel) || \ - ((CHANNEL) == TIM8_TRG_COM_IRQChannel) || \ - ((CHANNEL) == TIM8_CC_IRQChannel) || \ - ((CHANNEL) == ADC3_IRQChannel) || \ - ((CHANNEL) == FSMC_IRQChannel) || \ - ((CHANNEL) == SDIO_IRQChannel) || \ - ((CHANNEL) == TIM5_IRQChannel) || \ - ((CHANNEL) == SPI3_IRQChannel) || \ - ((CHANNEL) == UART4_IRQChannel) || \ - ((CHANNEL) == UART5_IRQChannel) || \ - ((CHANNEL) == TIM6_IRQChannel) || \ - ((CHANNEL) == TIM7_IRQChannel) || \ - ((CHANNEL) == DMA2_Channel1_IRQChannel) || \ - ((CHANNEL) == DMA2_Channel2_IRQChannel) || \ - ((CHANNEL) == DMA2_Channel3_IRQChannel) || \ - ((CHANNEL) == DMA2_Channel4_5_IRQChannel)) - - -/* System Handlers -----------------------------------------------------------*/ -#define SystemHandler_NMI ((u32)0x00001F) /* NMI Handler */ -#define SystemHandler_HardFault ((u32)0x000000) /* Hard Fault Handler */ -#define SystemHandler_MemoryManage ((u32)0x043430) /* Memory Manage Handler */ -#define SystemHandler_BusFault ((u32)0x547931) /* Bus Fault Handler */ -#define SystemHandler_UsageFault ((u32)0x24C232) /* Usage Fault Handler */ -#define SystemHandler_SVCall ((u32)0x01FF40) /* SVCall Handler */ -#define SystemHandler_DebugMonitor ((u32)0x0A0080) /* Debug Monitor Handler */ -#define SystemHandler_PSV ((u32)0x02829C) /* PSV Handler */ -#define SystemHandler_SysTick ((u32)0x02C39A) /* SysTick Handler */ - -#define IS_CONFIG_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_UsageFault)) - -#define IS_PRIORITY_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_UsageFault) || \ - ((HANDLER) == SystemHandler_SVCall) || \ - ((HANDLER) == SystemHandler_DebugMonitor) || \ - ((HANDLER) == SystemHandler_PSV) || \ - ((HANDLER) == SystemHandler_SysTick)) - -#define IS_GET_PENDING_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_SVCall)) - -#define IS_SET_PENDING_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_NMI) || \ - ((HANDLER) == SystemHandler_PSV) || \ - ((HANDLER) == SystemHandler_SysTick)) - -#define IS_CLEAR_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_PSV) || \ - ((HANDLER) == SystemHandler_SysTick)) - -#define IS_GET_ACTIVE_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_UsageFault) || \ - ((HANDLER) == SystemHandler_SVCall) || \ - ((HANDLER) == SystemHandler_DebugMonitor) || \ - ((HANDLER) == SystemHandler_PSV) || \ - ((HANDLER) == SystemHandler_SysTick)) - -#define IS_FAULT_SOURCE_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_HardFault) || \ - ((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_UsageFault) || \ - ((HANDLER) == SystemHandler_DebugMonitor)) - -#define IS_FAULT_ADDRESS_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault)) - - -/* Vector Table Base ---------------------------------------------------------*/ -#define NVIC_VectTab_RAM ((u32)0x20000000) -#define NVIC_VectTab_FLASH ((u32)0x08000000) - -#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ - ((VECTTAB) == NVIC_VectTab_FLASH)) - -/* System Low Power ----------------------------------------------------------*/ -#define NVIC_LP_SEVONPEND ((u8)0x10) -#define NVIC_LP_SLEEPDEEP ((u8)0x04) -#define NVIC_LP_SLEEPONEXIT ((u8)0x02) - -#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ - ((LP) == NVIC_LP_SLEEPDEEP) || \ - ((LP) == NVIC_LP_SLEEPONEXIT)) - -/* Preemption Priority Group -------------------------------------------------*/ -#define NVIC_PriorityGroup_0 ((u32)0x700) /* 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PriorityGroup_1 ((u32)0x600) /* 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PriorityGroup_2 ((u32)0x500) /* 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PriorityGroup_3 ((u32)0x400) /* 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PriorityGroup_4 ((u32)0x300) /* 4 bits for pre-emption priority - 0 bits for subpriority */ - -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ - ((GROUP) == NVIC_PriorityGroup_1) || \ - ((GROUP) == NVIC_PriorityGroup_2) || \ - ((GROUP) == NVIC_PriorityGroup_3) || \ - ((GROUP) == NVIC_PriorityGroup_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) -#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x0007FFFF) -#define IS_NVIC_BASE_PRI(PRI) ((PRI) < 0x10) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void NVIC_DeInit(void); -void NVIC_SCBDeInit(void); -void NVIC_PriorityGroupConfig(u32 NVIC_PriorityGroup); -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); -void NVIC_StructInit(NVIC_InitTypeDef* NVIC_InitStruct); -void NVIC_SETPRIMASK(void); -void NVIC_RESETPRIMASK(void); -void NVIC_SETFAULTMASK(void); -void NVIC_RESETFAULTMASK(void); -void NVIC_BASEPRICONFIG(u32 NewPriority); -u32 NVIC_GetBASEPRI(void); -u16 NVIC_GetCurrentPendingIRQChannel(void); -ITStatus NVIC_GetIRQChannelPendingBitStatus(u8 NVIC_IRQChannel); -void NVIC_SetIRQChannelPendingBit(u8 NVIC_IRQChannel); -void NVIC_ClearIRQChannelPendingBit(u8 NVIC_IRQChannel); -u16 NVIC_GetCurrentActiveHandler(void); -ITStatus NVIC_GetIRQChannelActiveBitStatus(u8 NVIC_IRQChannel); -u32 NVIC_GetCPUID(void); -void NVIC_SetVectorTable(u32 NVIC_VectTab, u32 Offset); -void NVIC_GenerateSystemReset(void); -void NVIC_GenerateCoreReset(void); -void NVIC_SystemLPConfig(u8 LowPowerMode, FunctionalState NewState); -void NVIC_SystemHandlerConfig(u32 SystemHandler, FunctionalState NewState); -void NVIC_SystemHandlerPriorityConfig(u32 SystemHandler, u8 SystemHandlerPreemptionPriority, - u8 SystemHandlerSubPriority); -ITStatus NVIC_GetSystemHandlerPendingBitStatus(u32 SystemHandler); -void NVIC_SetSystemHandlerPendingBit(u32 SystemHandler); -void NVIC_ClearSystemHandlerPendingBit(u32 SystemHandler); -ITStatus NVIC_GetSystemHandlerActiveBitStatus(u32 SystemHandler); -u32 NVIC_GetFaultHandlerSources(u32 SystemHandler); -u32 NVIC_GetFaultAddress(u32 SystemHandler); - -#endif /* __STM32F10x_NVIC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_pwr.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_pwr.h deleted file mode 100755 index 97b87c0..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_pwr.h +++ /dev/null @@ -1,77 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_pwr.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* PWR firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_PWR_H -#define __STM32F10x_PWR_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* PVD detection level */ -#define PWR_PVDLevel_2V2 ((u32)0x00000000) -#define PWR_PVDLevel_2V3 ((u32)0x00000020) -#define PWR_PVDLevel_2V4 ((u32)0x00000040) -#define PWR_PVDLevel_2V5 ((u32)0x00000060) -#define PWR_PVDLevel_2V6 ((u32)0x00000080) -#define PWR_PVDLevel_2V7 ((u32)0x000000A0) -#define PWR_PVDLevel_2V8 ((u32)0x000000C0) -#define PWR_PVDLevel_2V9 ((u32)0x000000E0) - -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \ - ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \ - ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \ - ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9)) - -/* Regulator state is STOP mode */ -#define PWR_Regulator_ON ((u32)0x00000000) -#define PWR_Regulator_LowPower ((u32)0x00000001) - -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ - ((REGULATOR) == PWR_Regulator_LowPower)) - -/* STOP mode entry */ -#define PWR_STOPEntry_WFI ((u8)0x01) -#define PWR_STOPEntry_WFE ((u8)0x02) - -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) - -/* PWR Flag */ -#define PWR_FLAG_WU ((u32)0x00000001) -#define PWR_FLAG_SB ((u32)0x00000002) -#define PWR_FLAG_PVDO ((u32)0x00000004) - -#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ - ((FLAG) == PWR_FLAG_PVDO)) -#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void PWR_DeInit(void); -void PWR_BackupAccessCmd(FunctionalState NewState); -void PWR_PVDCmd(FunctionalState NewState); -void PWR_PVDLevelConfig(u32 PWR_PVDLevel); -void PWR_WakeUpPinCmd(FunctionalState NewState); -void PWR_EnterSTOPMode(u32 PWR_Regulator, u8 PWR_STOPEntry); -void PWR_EnterSTANDBYMode(void); -FlagStatus PWR_GetFlagStatus(u32 PWR_FLAG); -void PWR_ClearFlag(u32 PWR_FLAG); - -#endif /* __STM32F10x_PWR_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_rcc.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_rcc.h deleted file mode 100755 index 703c3f7..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_rcc.h +++ /dev/null @@ -1,288 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_rcc.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* RCC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_RCC_H -#define __STM32F10x_RCC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -typedef struct -{ - u32 SYSCLK_Frequency; - u32 HCLK_Frequency; - u32 PCLK1_Frequency; - u32 PCLK2_Frequency; - u32 ADCCLK_Frequency; -}RCC_ClocksTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* HSE configuration */ -#define RCC_HSE_OFF ((u32)0x00000000) -#define RCC_HSE_ON ((u32)0x00010000) -#define RCC_HSE_Bypass ((u32)0x00040000) - -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_Bypass)) - -/* PLL entry clock source */ -#define RCC_PLLSource_HSI_Div2 ((u32)0x00000000) -#define RCC_PLLSource_HSE_Div1 ((u32)0x00010000) -#define RCC_PLLSource_HSE_Div2 ((u32)0x00030000) - -#define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ - ((SOURCE) == RCC_PLLSource_HSE_Div1) || \ - ((SOURCE) == RCC_PLLSource_HSE_Div2)) - -/* PLL multiplication factor */ -#define RCC_PLLMul_2 ((u32)0x00000000) -#define RCC_PLLMul_3 ((u32)0x00040000) -#define RCC_PLLMul_4 ((u32)0x00080000) -#define RCC_PLLMul_5 ((u32)0x000C0000) -#define RCC_PLLMul_6 ((u32)0x00100000) -#define RCC_PLLMul_7 ((u32)0x00140000) -#define RCC_PLLMul_8 ((u32)0x00180000) -#define RCC_PLLMul_9 ((u32)0x001C0000) -#define RCC_PLLMul_10 ((u32)0x00200000) -#define RCC_PLLMul_11 ((u32)0x00240000) -#define RCC_PLLMul_12 ((u32)0x00280000) -#define RCC_PLLMul_13 ((u32)0x002C0000) -#define RCC_PLLMul_14 ((u32)0x00300000) -#define RCC_PLLMul_15 ((u32)0x00340000) -#define RCC_PLLMul_16 ((u32)0x00380000) - -#define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ - ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ - ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ - ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ - ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ - ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ - ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ - ((MUL) == RCC_PLLMul_16)) - -/* System clock source */ -#define RCC_SYSCLKSource_HSI ((u32)0x00000000) -#define RCC_SYSCLKSource_HSE ((u32)0x00000001) -#define RCC_SYSCLKSource_PLLCLK ((u32)0x00000002) - -#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ - ((SOURCE) == RCC_SYSCLKSource_HSE) || \ - ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) - -/* AHB clock source */ -#define RCC_SYSCLK_Div1 ((u32)0x00000000) -#define RCC_SYSCLK_Div2 ((u32)0x00000080) -#define RCC_SYSCLK_Div4 ((u32)0x00000090) -#define RCC_SYSCLK_Div8 ((u32)0x000000A0) -#define RCC_SYSCLK_Div16 ((u32)0x000000B0) -#define RCC_SYSCLK_Div64 ((u32)0x000000C0) -#define RCC_SYSCLK_Div128 ((u32)0x000000D0) -#define RCC_SYSCLK_Div256 ((u32)0x000000E0) -#define RCC_SYSCLK_Div512 ((u32)0x000000F0) - -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ - ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ - ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ - ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ - ((HCLK) == RCC_SYSCLK_Div512)) - -/* APB1/APB2 clock source */ -#define RCC_HCLK_Div1 ((u32)0x00000000) -#define RCC_HCLK_Div2 ((u32)0x00000400) -#define RCC_HCLK_Div4 ((u32)0x00000500) -#define RCC_HCLK_Div8 ((u32)0x00000600) -#define RCC_HCLK_Div16 ((u32)0x00000700) - -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ - ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ - ((PCLK) == RCC_HCLK_Div16)) - -/* RCC Interrupt source */ -#define RCC_IT_LSIRDY ((u8)0x01) -#define RCC_IT_LSERDY ((u8)0x02) -#define RCC_IT_HSIRDY ((u8)0x04) -#define RCC_IT_HSERDY ((u8)0x08) -#define RCC_IT_PLLRDY ((u8)0x10) -#define RCC_IT_CSS ((u8)0x80) - -#define IS_RCC_IT(IT) ((((IT) & (u8)0xE0) == 0x00) && ((IT) != 0x00)) -#define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ - ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ - ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS)) -#define IS_RCC_CLEAR_IT(IT) ((((IT) & (u8)0x60) == 0x00) && ((IT) != 0x00)) - -/* USB clock source */ -#define RCC_USBCLKSource_PLLCLK_1Div5 ((u8)0x00) -#define RCC_USBCLKSource_PLLCLK_Div1 ((u8)0x01) - -#define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \ - ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1)) - -/* ADC clock source */ -#define RCC_PCLK2_Div2 ((u32)0x00000000) -#define RCC_PCLK2_Div4 ((u32)0x00004000) -#define RCC_PCLK2_Div6 ((u32)0x00008000) -#define RCC_PCLK2_Div8 ((u32)0x0000C000) - -#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \ - ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8)) - -/* LSE configuration */ -#define RCC_LSE_OFF ((u8)0x00) -#define RCC_LSE_ON ((u8)0x01) -#define RCC_LSE_Bypass ((u8)0x04) - -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_Bypass)) - -/* RTC clock source */ -#define RCC_RTCCLKSource_LSE ((u32)0x00000100) -#define RCC_RTCCLKSource_LSI ((u32)0x00000200) -#define RCC_RTCCLKSource_HSE_Div128 ((u32)0x00000300) - -#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ - ((SOURCE) == RCC_RTCCLKSource_LSI) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div128)) - -/* AHB peripheral */ -#define RCC_AHBPeriph_DMA1 ((u32)0x00000001) -#define RCC_AHBPeriph_DMA2 ((u32)0x00000002) -#define RCC_AHBPeriph_SRAM ((u32)0x00000004) -#define RCC_AHBPeriph_FLITF ((u32)0x00000010) -#define RCC_AHBPeriph_CRC ((u32)0x00000040) -#define RCC_AHBPeriph_FSMC ((u32)0x00000100) -#define RCC_AHBPeriph_SDIO ((u32)0x00000400) - -#define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00)) - -/* APB2 peripheral */ -#define RCC_APB2Periph_AFIO ((u32)0x00000001) -#define RCC_APB2Periph_GPIOA ((u32)0x00000004) -#define RCC_APB2Periph_GPIOB ((u32)0x00000008) -#define RCC_APB2Periph_GPIOC ((u32)0x00000010) -#define RCC_APB2Periph_GPIOD ((u32)0x00000020) -#define RCC_APB2Periph_GPIOE ((u32)0x00000040) -#define RCC_APB2Periph_GPIOF ((u32)0x00000080) -#define RCC_APB2Periph_GPIOG ((u32)0x00000100) -#define RCC_APB2Periph_ADC1 ((u32)0x00000200) -#define RCC_APB2Periph_ADC2 ((u32)0x00000400) -#define RCC_APB2Periph_TIM1 ((u32)0x00000800) -#define RCC_APB2Periph_SPI1 ((u32)0x00001000) -#define RCC_APB2Periph_TIM8 ((u32)0x00002000) -#define RCC_APB2Periph_USART1 ((u32)0x00004000) -#define RCC_APB2Periph_ADC3 ((u32)0x00008000) -#define RCC_APB2Periph_ALL ((u32)0x0000FFFD) - -#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFFF0002) == 0x00) && ((PERIPH) != 0x00)) - -/* APB1 peripheral */ -#define RCC_APB1Periph_TIM2 ((u32)0x00000001) -#define RCC_APB1Periph_TIM3 ((u32)0x00000002) -#define RCC_APB1Periph_TIM4 ((u32)0x00000004) -#define RCC_APB1Periph_TIM5 ((u32)0x00000008) -#define RCC_APB1Periph_TIM6 ((u32)0x00000010) -#define RCC_APB1Periph_TIM7 ((u32)0x00000020) -#define RCC_APB1Periph_WWDG ((u32)0x00000800) -#define RCC_APB1Periph_SPI2 ((u32)0x00004000) -#define RCC_APB1Periph_SPI3 ((u32)0x00008000) -#define RCC_APB1Periph_USART2 ((u32)0x00020000) -#define RCC_APB1Periph_USART3 ((u32)0x00040000) -#define RCC_APB1Periph_UART4 ((u32)0x00080000) -#define RCC_APB1Periph_UART5 ((u32)0x00100000) -#define RCC_APB1Periph_I2C1 ((u32)0x00200000) -#define RCC_APB1Periph_I2C2 ((u32)0x00400000) -#define RCC_APB1Periph_USB ((u32)0x00800000) -#define RCC_APB1Periph_CAN ((u32)0x02000000) -#define RCC_APB1Periph_BKP ((u32)0x08000000) -#define RCC_APB1Periph_PWR ((u32)0x10000000) -#define RCC_APB1Periph_DAC ((u32)0x20000000) -#define RCC_APB1Periph_ALL ((u32)0x3AFEC83F) - -#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0xC50137C0) == 0x00) && ((PERIPH) != 0x00)) - -/* Clock source to output on MCO pin */ -#define RCC_MCO_NoClock ((u8)0x00) -#define RCC_MCO_SYSCLK ((u8)0x04) -#define RCC_MCO_HSI ((u8)0x05) -#define RCC_MCO_HSE ((u8)0x06) -#define RCC_MCO_PLLCLK_Div2 ((u8)0x07) - -#define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ - ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ - ((MCO) == RCC_MCO_PLLCLK_Div2)) - -/* RCC Flag */ -#define RCC_FLAG_HSIRDY ((u8)0x20) -#define RCC_FLAG_HSERDY ((u8)0x31) -#define RCC_FLAG_PLLRDY ((u8)0x39) -#define RCC_FLAG_LSERDY ((u8)0x41) -#define RCC_FLAG_LSIRDY ((u8)0x61) -#define RCC_FLAG_PINRST ((u8)0x7A) -#define RCC_FLAG_PORRST ((u8)0x7B) -#define RCC_FLAG_SFTRST ((u8)0x7C) -#define RCC_FLAG_IWDGRST ((u8)0x7D) -#define RCC_FLAG_WWDGRST ((u8)0x7E) -#define RCC_FLAG_LPWRRST ((u8)0x7F) - -#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ - ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ - ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ - ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ - ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ - ((FLAG) == RCC_FLAG_LPWRRST)) - -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void RCC_DeInit(void); -void RCC_HSEConfig(u32 RCC_HSE); -ErrorStatus RCC_WaitForHSEStartUp(void); -void RCC_AdjustHSICalibrationValue(u8 HSICalibrationValue); -void RCC_HSICmd(FunctionalState NewState); -void RCC_PLLConfig(u32 RCC_PLLSource, u32 RCC_PLLMul); -void RCC_PLLCmd(FunctionalState NewState); -void RCC_SYSCLKConfig(u32 RCC_SYSCLKSource); -u8 RCC_GetSYSCLKSource(void); -void RCC_HCLKConfig(u32 RCC_SYSCLK); -void RCC_PCLK1Config(u32 RCC_HCLK); -void RCC_PCLK2Config(u32 RCC_HCLK); -void RCC_ITConfig(u8 RCC_IT, FunctionalState NewState); -void RCC_USBCLKConfig(u32 RCC_USBCLKSource); -void RCC_ADCCLKConfig(u32 RCC_PCLK2); -void RCC_LSEConfig(u8 RCC_LSE); -void RCC_LSICmd(FunctionalState NewState); -void RCC_RTCCLKConfig(u32 RCC_RTCCLKSource); -void RCC_RTCCLKCmd(FunctionalState NewState); -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); -void RCC_AHBPeriphClockCmd(u32 RCC_AHBPeriph, FunctionalState NewState); -void RCC_APB2PeriphClockCmd(u32 RCC_APB2Periph, FunctionalState NewState); -void RCC_APB1PeriphClockCmd(u32 RCC_APB1Periph, FunctionalState NewState); -void RCC_APB2PeriphResetCmd(u32 RCC_APB2Periph, FunctionalState NewState); -void RCC_APB1PeriphResetCmd(u32 RCC_APB1Periph, FunctionalState NewState); -void RCC_BackupResetCmd(FunctionalState NewState); -void RCC_ClockSecuritySystemCmd(FunctionalState NewState); -void RCC_MCOConfig(u8 RCC_MCO); -FlagStatus RCC_GetFlagStatus(u8 RCC_FLAG); -void RCC_ClearFlag(void); -ITStatus RCC_GetITStatus(u8 RCC_IT); -void RCC_ClearITPendingBit(u8 RCC_IT); - -#endif /* __STM32F10x_RCC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_rtc.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_rtc.h deleted file mode 100755 index 843904c..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_rtc.h +++ /dev/null @@ -1,70 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_rtc.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* RTC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_RTC_H -#define __STM32F10x_RTC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* RTC interrupts define -----------------------------------------------------*/ -#define RTC_IT_OW ((u16)0x0004) /* Overflow interrupt */ -#define RTC_IT_ALR ((u16)0x0002) /* Alarm interrupt */ -#define RTC_IT_SEC ((u16)0x0001) /* Second interrupt */ - -#define IS_RTC_IT(IT) ((((IT) & (u16)0xFFF8) == 0x00) && ((IT) != 0x00)) - -#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \ - ((IT) == RTC_IT_SEC)) - -/* RTC interrupts flags ------------------------------------------------------*/ -#define RTC_FLAG_RTOFF ((u16)0x0020) /* RTC Operation OFF flag */ -#define RTC_FLAG_RSF ((u16)0x0008) /* Registers Synchronized flag */ -#define RTC_FLAG_OW ((u16)0x0004) /* Overflow flag */ -#define RTC_FLAG_ALR ((u16)0x0002) /* Alarm flag */ -#define RTC_FLAG_SEC ((u16)0x0001) /* Second flag */ - -#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (u16)0xFFF0) == 0x00) && ((FLAG) != 0x00)) - -#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \ - ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \ - ((FLAG) == RTC_FLAG_SEC)) - -#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void RTC_ITConfig(u16 RTC_IT, FunctionalState NewState); -void RTC_EnterConfigMode(void); -void RTC_ExitConfigMode(void); -u32 RTC_GetCounter(void); -void RTC_SetCounter(u32 CounterValue); -void RTC_SetPrescaler(u32 PrescalerValue); -void RTC_SetAlarm(u32 AlarmValue); -u32 RTC_GetDivider(void); -void RTC_WaitForLastTask(void); -void RTC_WaitForSynchro(void); -FlagStatus RTC_GetFlagStatus(u16 RTC_FLAG); -void RTC_ClearFlag(u16 RTC_FLAG); -ITStatus RTC_GetITStatus(u16 RTC_IT); -void RTC_ClearITPendingBit(u16 RTC_IT); - -#endif /* __STM32F10x_RTC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_sdio.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_sdio.h deleted file mode 100755 index 289c890..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_sdio.h +++ /dev/null @@ -1,337 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_sdio.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* SDIO firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SDIO_H -#define __STM32F10x_SDIO_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -typedef struct -{ - u8 SDIO_ClockDiv; - u32 SDIO_ClockEdge; - u32 SDIO_ClockBypass; - u32 SDIO_ClockPowerSave; - u32 SDIO_BusWide; - u32 SDIO_HardwareFlowControl; -} SDIO_InitTypeDef; - -typedef struct -{ - u32 SDIO_Argument; - u32 SDIO_CmdIndex; - u32 SDIO_Response; - u32 SDIO_Wait; - u32 SDIO_CPSM; -} SDIO_CmdInitTypeDef; - -typedef struct -{ - u32 SDIO_DataTimeOut; - u32 SDIO_DataLength; - u32 SDIO_DataBlockSize; - u32 SDIO_TransferDir; - u32 SDIO_TransferMode; - u32 SDIO_DPSM; -} SDIO_DataInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* SDIO Clock Edge -----------------------------------------------------------*/ -#define SDIO_ClockEdge_Rising ((u32)0x00000000) -#define SDIO_ClockEdge_Falling ((u32)0x00002000) - -#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ - ((EDGE) == SDIO_ClockEdge_Falling)) -/* SDIO Clock Bypass ----------------------------------------------------------*/ -#define SDIO_ClockBypass_Disable ((u32)0x00000000) -#define SDIO_ClockBypass_Enable ((u32)0x00000400) - -#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ - ((BYPASS) == SDIO_ClockBypass_Enable)) - -/* SDIO Clock Power Save ----------------------------------------------------*/ -#define SDIO_ClockPowerSave_Disable ((u32)0x00000000) -#define SDIO_ClockPowerSave_Enable ((u32)0x00000200) - -#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ - ((SAVE) == SDIO_ClockPowerSave_Enable)) - -/* SDIO Bus Wide -------------------------------------------------------------*/ -#define SDIO_BusWide_1b ((u32)0x00000000) -#define SDIO_BusWide_4b ((u32)0x00000800) -#define SDIO_BusWide_8b ((u32)0x00001000) - -#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ - ((WIDE) == SDIO_BusWide_8b)) - -/* SDIO Hardware Flow Control -----------------------------------------------*/ -#define SDIO_HardwareFlowControl_Disable ((u32)0x00000000) -#define SDIO_HardwareFlowControl_Enable ((u32)0x00004000) - -#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ - ((CONTROL) == SDIO_HardwareFlowControl_Enable)) - -/* SDIO Power State ----------------------------------------------------------*/ -#define SDIO_PowerState_OFF ((u32)0x00000000) -#define SDIO_PowerState_ON ((u32)0x00000003) - -#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) - -/* SDIO Interrupt soucres ----------------------------------------------------*/ -#define SDIO_IT_CCRCFAIL ((u32)0x00000001) -#define SDIO_IT_DCRCFAIL ((u32)0x00000002) -#define SDIO_IT_CTIMEOUT ((u32)0x00000004) -#define SDIO_IT_DTIMEOUT ((u32)0x00000008) -#define SDIO_IT_TXUNDERR ((u32)0x00000010) -#define SDIO_IT_RXOVERR ((u32)0x00000020) -#define SDIO_IT_CMDREND ((u32)0x00000040) -#define SDIO_IT_CMDSENT ((u32)0x00000080) -#define SDIO_IT_DATAEND ((u32)0x00000100) -#define SDIO_IT_STBITERR ((u32)0x00000200) -#define SDIO_IT_DBCKEND ((u32)0x00000400) -#define SDIO_IT_CMDACT ((u32)0x00000800) -#define SDIO_IT_TXACT ((u32)0x00001000) -#define SDIO_IT_RXACT ((u32)0x00002000) -#define SDIO_IT_TXFIFOHE ((u32)0x00004000) -#define SDIO_IT_RXFIFOHF ((u32)0x00008000) -#define SDIO_IT_TXFIFOF ((u32)0x00010000) -#define SDIO_IT_RXFIFOF ((u32)0x00020000) -#define SDIO_IT_TXFIFOE ((u32)0x00040000) -#define SDIO_IT_RXFIFOE ((u32)0x00080000) -#define SDIO_IT_TXDAVL ((u32)0x00100000) -#define SDIO_IT_RXDAVL ((u32)0x00200000) -#define SDIO_IT_SDIOIT ((u32)0x00400000) -#define SDIO_IT_CEATAEND ((u32)0x00800000) - -#define IS_SDIO_IT(IT) ((((IT) & (u32)0xFF000000) == 0x00) && ((IT) != (u32)0x00)) - -/* SDIO Command Index -------------------------------------------------------*/ -#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) - -/* SDIO Response Type --------------------------------------------------------*/ -#define SDIO_Response_No ((u32)0x00000000) -#define SDIO_Response_Short ((u32)0x00000040) -#define SDIO_Response_Long ((u32)0x000000C0) - -#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ - ((RESPONSE) == SDIO_Response_Short) || \ - ((RESPONSE) == SDIO_Response_Long)) - -/* SDIO Wait Interrupt State -------------------------------------------------*/ -#define SDIO_Wait_No ((u32)0x00000000) /* SDIO No Wait, TimeOut is enabled */ -#define SDIO_Wait_IT ((u32)0x00000100) /* SDIO Wait Interrupt Request */ -#define SDIO_Wait_Pend ((u32)0x00000200) /* SDIO Wait End of transfer */ - -#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ - ((WAIT) == SDIO_Wait_Pend)) - -/* SDIO CPSM State -----------------------------------------------------------*/ -#define SDIO_CPSM_Disable ((u32)0x00000000) -#define SDIO_CPSM_Enable ((u32)0x00000400) - -#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) - -/* SDIO Response Registers ---------------------------------------------------*/ -#define SDIO_RESP1 ((u32)0x00000000) -#define SDIO_RESP2 ((u32)0x00000004) -#define SDIO_RESP3 ((u32)0x00000008) -#define SDIO_RESP4 ((u32)0x0000000C) - -#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ - ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) - -/* SDIO Data Length ----------------------------------------------------------*/ -#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) - -/* SDIO Data Block Size ------------------------------------------------------*/ -#define SDIO_DataBlockSize_1b ((u32)0x00000000) -#define SDIO_DataBlockSize_2b ((u32)0x00000010) -#define SDIO_DataBlockSize_4b ((u32)0x00000020) -#define SDIO_DataBlockSize_8b ((u32)0x00000030) -#define SDIO_DataBlockSize_16b ((u32)0x00000040) -#define SDIO_DataBlockSize_32b ((u32)0x00000050) -#define SDIO_DataBlockSize_64b ((u32)0x00000060) -#define SDIO_DataBlockSize_128b ((u32)0x00000070) -#define SDIO_DataBlockSize_256b ((u32)0x00000080) -#define SDIO_DataBlockSize_512b ((u32)0x00000090) -#define SDIO_DataBlockSize_1024b ((u32)0x000000A0) -#define SDIO_DataBlockSize_2048b ((u32)0x000000B0) -#define SDIO_DataBlockSize_4096b ((u32)0x000000C0) -#define SDIO_DataBlockSize_8192b ((u32)0x000000D0) -#define SDIO_DataBlockSize_16384b ((u32)0x000000E0) - -#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ - ((SIZE) == SDIO_DataBlockSize_2b) || \ - ((SIZE) == SDIO_DataBlockSize_4b) || \ - ((SIZE) == SDIO_DataBlockSize_8b) || \ - ((SIZE) == SDIO_DataBlockSize_16b) || \ - ((SIZE) == SDIO_DataBlockSize_32b) || \ - ((SIZE) == SDIO_DataBlockSize_64b) || \ - ((SIZE) == SDIO_DataBlockSize_128b) || \ - ((SIZE) == SDIO_DataBlockSize_256b) || \ - ((SIZE) == SDIO_DataBlockSize_512b) || \ - ((SIZE) == SDIO_DataBlockSize_1024b) || \ - ((SIZE) == SDIO_DataBlockSize_2048b) || \ - ((SIZE) == SDIO_DataBlockSize_4096b) || \ - ((SIZE) == SDIO_DataBlockSize_8192b) || \ - ((SIZE) == SDIO_DataBlockSize_16384b)) - -/* SDIO Transfer Direction ---------------------------------------------------*/ -#define SDIO_TransferDir_ToCard ((u32)0x00000000) -#define SDIO_TransferDir_ToSDIO ((u32)0x00000002) - -#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ - ((DIR) == SDIO_TransferDir_ToSDIO)) - -/* SDIO Transfer Type --------------------------------------------------------*/ -#define SDIO_TransferMode_Block ((u32)0x00000000) -#define SDIO_TransferMode_Stream ((u32)0x00000004) - -#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ - ((MODE) == SDIO_TransferMode_Block)) - -/* SDIO DPSM State -----------------------------------------------------------*/ -#define SDIO_DPSM_Disable ((u32)0x00000000) -#define SDIO_DPSM_Enable ((u32)0x00000001) - -#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) - -/* SDIO Flags ----------------------------------------------------------------*/ -#define SDIO_FLAG_CCRCFAIL ((u32)0x00000001) -#define SDIO_FLAG_DCRCFAIL ((u32)0x00000002) -#define SDIO_FLAG_CTIMEOUT ((u32)0x00000004) -#define SDIO_FLAG_DTIMEOUT ((u32)0x00000008) -#define SDIO_FLAG_TXUNDERR ((u32)0x00000010) -#define SDIO_FLAG_RXOVERR ((u32)0x00000020) -#define SDIO_FLAG_CMDREND ((u32)0x00000040) -#define SDIO_FLAG_CMDSENT ((u32)0x00000080) -#define SDIO_FLAG_DATAEND ((u32)0x00000100) -#define SDIO_FLAG_STBITERR ((u32)0x00000200) -#define SDIO_FLAG_DBCKEND ((u32)0x00000400) -#define SDIO_FLAG_CMDACT ((u32)0x00000800) -#define SDIO_FLAG_TXACT ((u32)0x00001000) -#define SDIO_FLAG_RXACT ((u32)0x00002000) -#define SDIO_FLAG_TXFIFOHE ((u32)0x00004000) -#define SDIO_FLAG_RXFIFOHF ((u32)0x00008000) -#define SDIO_FLAG_TXFIFOF ((u32)0x00010000) -#define SDIO_FLAG_RXFIFOF ((u32)0x00020000) -#define SDIO_FLAG_TXFIFOE ((u32)0x00040000) -#define SDIO_FLAG_RXFIFOE ((u32)0x00080000) -#define SDIO_FLAG_TXDAVL ((u32)0x00100000) -#define SDIO_FLAG_RXDAVL ((u32)0x00200000) -#define SDIO_FLAG_SDIOIT ((u32)0x00400000) -#define SDIO_FLAG_CEATAEND ((u32)0x00800000) - -#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_TXUNDERR) || \ - ((FLAG) == SDIO_FLAG_RXOVERR) || \ - ((FLAG) == SDIO_FLAG_CMDREND) || \ - ((FLAG) == SDIO_FLAG_CMDSENT) || \ - ((FLAG) == SDIO_FLAG_DATAEND) || \ - ((FLAG) == SDIO_FLAG_STBITERR) || \ - ((FLAG) == SDIO_FLAG_DBCKEND) || \ - ((FLAG) == SDIO_FLAG_CMDACT) || \ - ((FLAG) == SDIO_FLAG_TXACT) || \ - ((FLAG) == SDIO_FLAG_RXACT) || \ - ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOF) || \ - ((FLAG) == SDIO_FLAG_RXFIFOF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOE) || \ - ((FLAG) == SDIO_FLAG_TXDAVL) || \ - ((FLAG) == SDIO_FLAG_RXDAVL) || \ - ((FLAG) == SDIO_FLAG_SDIOIT) || \ - ((FLAG) == SDIO_FLAG_CEATAEND)) - -#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (u32)0xFF3FF800) == 0x00) && ((FLAG) != (u32)0x00)) - -#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ - ((IT) == SDIO_IT_DCRCFAIL) || \ - ((IT) == SDIO_IT_CTIMEOUT) || \ - ((IT) == SDIO_IT_DTIMEOUT) || \ - ((IT) == SDIO_IT_TXUNDERR) || \ - ((IT) == SDIO_IT_RXOVERR) || \ - ((IT) == SDIO_IT_CMDREND) || \ - ((IT) == SDIO_IT_CMDSENT) || \ - ((IT) == SDIO_IT_DATAEND) || \ - ((IT) == SDIO_IT_STBITERR) || \ - ((IT) == SDIO_IT_DBCKEND) || \ - ((IT) == SDIO_IT_CMDACT) || \ - ((IT) == SDIO_IT_TXACT) || \ - ((IT) == SDIO_IT_RXACT) || \ - ((IT) == SDIO_IT_TXFIFOHE) || \ - ((IT) == SDIO_IT_RXFIFOHF) || \ - ((IT) == SDIO_IT_TXFIFOF) || \ - ((IT) == SDIO_IT_RXFIFOF) || \ - ((IT) == SDIO_IT_TXFIFOE) || \ - ((IT) == SDIO_IT_RXFIFOE) || \ - ((IT) == SDIO_IT_TXDAVL) || \ - ((IT) == SDIO_IT_RXDAVL) || \ - ((IT) == SDIO_IT_SDIOIT) || \ - ((IT) == SDIO_IT_CEATAEND)) - -#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (u32)0xFF3FF800) == 0x00) && ((IT) != (u32)0x00)) - -/* SDIO Read Wait Mode -------------------------------------------------------*/ -#define SDIO_ReadWaitMode_CLK ((u32)0x00000000) -#define SDIO_ReadWaitMode_DATA2 ((u32)0x00000001) - -#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ - ((MODE) == SDIO_ReadWaitMode_DATA2)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void SDIO_DeInit(void); -void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_ClockCmd(FunctionalState NewState); -void SDIO_SetPowerState(u32 SDIO_PowerState); -u32 SDIO_GetPowerState(void); -void SDIO_ITConfig(u32 SDIO_IT, FunctionalState NewState); -void SDIO_DMACmd(FunctionalState NewState); -void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); -void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); -u8 SDIO_GetCommandResponse(void); -u32 SDIO_GetResponse(u32 SDIO_RESP); -void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -u32 SDIO_GetDataCounter(void); -u32 SDIO_ReadData(void); -void SDIO_WriteData(u32 Data); -u32 SDIO_GetFIFOCount(void); -void SDIO_StartSDIOReadWait(FunctionalState NewState); -void SDIO_StopSDIOReadWait(FunctionalState NewState); -void SDIO_SetSDIOReadWaitMode(u32 SDIO_ReadWaitMode); -void SDIO_SetSDIOOperation(FunctionalState NewState); -void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); -void SDIO_CommandCompletionCmd(FunctionalState NewState); -void SDIO_CEATAITCmd(FunctionalState NewState); -void SDIO_SendCEATACmd(FunctionalState NewState); -FlagStatus SDIO_GetFlagStatus(u32 SDIO_FLAG); -void SDIO_ClearFlag(u32 SDIO_FLAG); -ITStatus SDIO_GetITStatus(u32 SDIO_IT); -void SDIO_ClearITPendingBit(u32 SDIO_IT); - -#endif /* __STM32F10x_SDIO_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_spi.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_spi.h deleted file mode 100755 index e563132..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_spi.h +++ /dev/null @@ -1,292 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_spi.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* SPI firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SPI_H -#define __STM32F10x_SPI_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* SPI Init structure definition */ -typedef struct -{ - u16 SPI_Direction; - u16 SPI_Mode; - u16 SPI_DataSize; - u16 SPI_CPOL; - u16 SPI_CPHA; - u16 SPI_NSS; - u16 SPI_BaudRatePrescaler; - u16 SPI_FirstBit; - u16 SPI_CRCPolynomial; -}SPI_InitTypeDef; - -/* I2S Init structure definition */ -typedef struct -{ - u16 I2S_Mode; - u16 I2S_Standard; - u16 I2S_DataFormat; - u16 I2S_MCLKOutput; - u16 I2S_AudioFreq; - u16 I2S_CPOL; -}I2S_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -#define IS_SPI_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == SPI1_BASE) || \ - ((*(u32*)&(PERIPH)) == SPI2_BASE) || \ - ((*(u32*)&(PERIPH)) == SPI3_BASE)) - -#define IS_SPI_23_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == SPI2_BASE) || \ - ((*(u32*)&(PERIPH)) == SPI3_BASE)) - -/* SPI data direction mode */ -#define SPI_Direction_2Lines_FullDuplex ((u16)0x0000) -#define SPI_Direction_2Lines_RxOnly ((u16)0x0400) -#define SPI_Direction_1Line_Rx ((u16)0x8000) -#define SPI_Direction_1Line_Tx ((u16)0xC000) - -#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ - ((MODE) == SPI_Direction_2Lines_RxOnly) || \ - ((MODE) == SPI_Direction_1Line_Rx) || \ - ((MODE) == SPI_Direction_1Line_Tx)) - -/* SPI master/slave mode */ -#define SPI_Mode_Master ((u16)0x0104) -#define SPI_Mode_Slave ((u16)0x0000) - -#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ - ((MODE) == SPI_Mode_Slave)) - -/* SPI data size */ -#define SPI_DataSize_16b ((u16)0x0800) -#define SPI_DataSize_8b ((u16)0x0000) - -#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ - ((DATASIZE) == SPI_DataSize_8b)) - -/* SPI Clock Polarity */ -#define SPI_CPOL_Low ((u16)0x0000) -#define SPI_CPOL_High ((u16)0x0002) - -#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ - ((CPOL) == SPI_CPOL_High)) - -/* SPI Clock Phase */ -#define SPI_CPHA_1Edge ((u16)0x0000) -#define SPI_CPHA_2Edge ((u16)0x0001) - -#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ - ((CPHA) == SPI_CPHA_2Edge)) - -/* SPI Slave Select management */ -#define SPI_NSS_Soft ((u16)0x0200) -#define SPI_NSS_Hard ((u16)0x0000) - -#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ - ((NSS) == SPI_NSS_Hard)) - -/* SPI BaudRate Prescaler */ -#define SPI_BaudRatePrescaler_2 ((u16)0x0000) -#define SPI_BaudRatePrescaler_4 ((u16)0x0008) -#define SPI_BaudRatePrescaler_8 ((u16)0x0010) -#define SPI_BaudRatePrescaler_16 ((u16)0x0018) -#define SPI_BaudRatePrescaler_32 ((u16)0x0020) -#define SPI_BaudRatePrescaler_64 ((u16)0x0028) -#define SPI_BaudRatePrescaler_128 ((u16)0x0030) -#define SPI_BaudRatePrescaler_256 ((u16)0x0038) - -#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_256)) - -/* SPI MSB/LSB transmission */ -#define SPI_FirstBit_MSB ((u16)0x0000) -#define SPI_FirstBit_LSB ((u16)0x0080) - -#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ - ((BIT) == SPI_FirstBit_LSB)) - -/* I2S Mode */ -#define I2S_Mode_SlaveTx ((u16)0x0000) -#define I2S_Mode_SlaveRx ((u16)0x0100) -#define I2S_Mode_MasterTx ((u16)0x0200) -#define I2S_Mode_MasterRx ((u16)0x0300) - -#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ - ((MODE) == I2S_Mode_SlaveRx) || \ - ((MODE) == I2S_Mode_MasterTx) || \ - ((MODE) == I2S_Mode_MasterRx) ) - -/* I2S Standard */ -#define I2S_Standard_Phillips ((u16)0x0000) -#define I2S_Standard_MSB ((u16)0x0010) -#define I2S_Standard_LSB ((u16)0x0020) -#define I2S_Standard_PCMShort ((u16)0x0030) -#define I2S_Standard_PCMLong ((u16)0x00B0) - -#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ - ((STANDARD) == I2S_Standard_MSB) || \ - ((STANDARD) == I2S_Standard_LSB) || \ - ((STANDARD) == I2S_Standard_PCMShort) || \ - ((STANDARD) == I2S_Standard_PCMLong)) - -/* I2S Data Format */ -#define I2S_DataFormat_16b ((u16)0x0000) -#define I2S_DataFormat_16bextended ((u16)0x0001) -#define I2S_DataFormat_24b ((u16)0x0003) -#define I2S_DataFormat_32b ((u16)0x0005) - -#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ - ((FORMAT) == I2S_DataFormat_16bextended) || \ - ((FORMAT) == I2S_DataFormat_24b) || \ - ((FORMAT) == I2S_DataFormat_32b)) - -/* I2S MCLK Output */ -#define I2S_MCLKOutput_Enable ((u16)0x0200) -#define I2S_MCLKOutput_Disable ((u16)0x0000) - -#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ - ((OUTPUT) == I2S_MCLKOutput_Disable)) - -/* I2S Audio Frequency */ -#define I2S_AudioFreq_48k ((u16)48000) -#define I2S_AudioFreq_44k ((u16)44100) -#define I2S_AudioFreq_22k ((u16)22050) -#define I2S_AudioFreq_16k ((u16)16000) -#define I2S_AudioFreq_8k ((u16)8000) -#define I2S_AudioFreq_Default ((u16)2) - -#define IS_I2S_AUDIO_FREQ(FREQ) (((FREQ) == I2S_AudioFreq_48k) || \ - ((FREQ) == I2S_AudioFreq_44k) || \ - ((FREQ) == I2S_AudioFreq_22k) || \ - ((FREQ) == I2S_AudioFreq_16k) || \ - ((FREQ) == I2S_AudioFreq_8k) || \ - ((FREQ) == I2S_AudioFreq_Default)) - -/* I2S Clock Polarity */ -#define I2S_CPOL_Low ((u16)0x0000) -#define I2S_CPOL_High ((u16)0x0008) - -#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ - ((CPOL) == I2S_CPOL_High)) - -/* SPI_I2S DMA transfer requests */ -#define SPI_I2S_DMAReq_Tx ((u16)0x0002) -#define SPI_I2S_DMAReq_Rx ((u16)0x0001) - -#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (u16)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) - -/* SPI NSS internal software mangement */ -#define SPI_NSSInternalSoft_Set ((u16)0x0100) -#define SPI_NSSInternalSoft_Reset ((u16)0xFEFF) - -#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ - ((INTERNAL) == SPI_NSSInternalSoft_Reset)) - -/* SPI CRC Transmit/Receive */ -#define SPI_CRC_Tx ((u8)0x00) -#define SPI_CRC_Rx ((u8)0x01) - -#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) - -/* SPI direction transmit/receive */ -#define SPI_Direction_Rx ((u16)0xBFFF) -#define SPI_Direction_Tx ((u16)0x4000) - -#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ - ((DIRECTION) == SPI_Direction_Tx)) - -/* SPI_I2S interrupts definition */ -#define SPI_I2S_IT_TXE ((u8)0x71) -#define SPI_I2S_IT_RXNE ((u8)0x60) -#define SPI_I2S_IT_ERR ((u8)0x50) - -#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == SPI_I2S_IT_RXNE) || \ - ((IT) == SPI_I2S_IT_ERR)) - -#define SPI_I2S_IT_OVR ((u8)0x56) -#define SPI_IT_MODF ((u8)0x55) -#define SPI_IT_CRCERR ((u8)0x54) -#define I2S_IT_UDR ((u8)0x53) - -#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_I2S_IT_OVR) || \ - ((IT) == SPI_IT_MODF) || \ - ((IT) == SPI_IT_CRCERR) || \ - ((IT) == I2S_IT_UDR)) - -#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \ - ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR)) - -/* SPI_I2S flags definition */ -#define SPI_I2S_FLAG_RXNE ((u16)0x0001) -#define SPI_I2S_FLAG_TXE ((u16)0x0002) -#define I2S_FLAG_CHSIDE ((u16)0x0004) -#define I2S_FLAG_UDR ((u16)0x0008) -#define SPI_FLAG_CRCERR ((u16)0x0010) -#define SPI_FLAG_MODF ((u16)0x0020) -#define SPI_I2S_FLAG_OVR ((u16)0x0040) -#define SPI_I2S_FLAG_BSY ((u16)0x0080) - -#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_OVR) || ((FLAG) == SPI_FLAG_MODF) || \ - ((FLAG) == SPI_FLAG_CRCERR) || ((FLAG) == I2S_FLAG_UDR)) -#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ - ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ - ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ - ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)) - -/* SPI CRC polynomial --------------------------------------------------------*/ -#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void SPI_I2S_DeInit(SPI_TypeDef* SPIx); -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, u8 SPI_I2S_IT, FunctionalState NewState); -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, u16 SPI_I2S_DMAReq, FunctionalState NewState); -void SPI_I2S_SendData(SPI_TypeDef* SPIx, u16 Data); -u16 SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, u16 SPI_NSSInternalSoft); -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, u16 SPI_DataSize); -void SPI_TransmitCRC(SPI_TypeDef* SPIx); -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); -u16 SPI_GetCRC(SPI_TypeDef* SPIx, u8 SPI_CRC); -u16 SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, u16 SPI_Direction); -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, u16 SPI_I2S_FLAG); -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, u16 SPI_I2S_FLAG); -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, u8 SPI_I2S_IT); -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, u8 SPI_I2S_IT); - -#endif /*__STM32F10x_SPI_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_systick.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_systick.h deleted file mode 100755 index 5a5300f..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_systick.h +++ /dev/null @@ -1,64 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_systick.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* SysTick firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SYSTICK_H -#define __STM32F10x_SYSTICK_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* SysTick clock source */ -#define SysTick_CLKSource_HCLK_Div8 ((u32)0xFFFFFFFB) -#define SysTick_CLKSource_HCLK ((u32)0x00000004) - -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ - ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) - -/* SysTick counter state */ -#define SysTick_Counter_Disable ((u32)0xFFFFFFFE) -#define SysTick_Counter_Enable ((u32)0x00000001) -#define SysTick_Counter_Clear ((u32)0x00000000) - -#define IS_SYSTICK_COUNTER(COUNTER) (((COUNTER) == SysTick_Counter_Disable) || \ - ((COUNTER) == SysTick_Counter_Enable) || \ - ((COUNTER) == SysTick_Counter_Clear)) - -/* SysTick Flag */ -#define SysTick_FLAG_COUNT ((u32)0x00000010) -#define SysTick_FLAG_SKEW ((u32)0x0000001E) -#define SysTick_FLAG_NOREF ((u32)0x0000001F) - -#define IS_SYSTICK_FLAG(FLAG) (((FLAG) == SysTick_FLAG_COUNT) || \ - ((FLAG) == SysTick_FLAG_SKEW) || \ - ((FLAG) == SysTick_FLAG_NOREF)) - -#define IS_SYSTICK_RELOAD(RELOAD) (((RELOAD) > 0) && ((RELOAD) <= 0xFFFFFF)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void SysTick_CLKSourceConfig(u32 SysTick_CLKSource); -void SysTick_SetReload(u32 Reload); -void SysTick_CounterCmd(u32 SysTick_Counter); -void SysTick_ITConfig(FunctionalState NewState); -u32 SysTick_GetCounter(void); -FlagStatus SysTick_GetFlagStatus(u8 SysTick_FLAG); - -#endif /* __STM32F10x_SYSTICK_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_tim.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_tim.h deleted file mode 100755 index 1d024b8..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_tim.h +++ /dev/null @@ -1,778 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_tim.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* TIM firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_TIM_H -#define __STM32F10x_TIM_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ - -/* TIM Time Base Init structure definition */ -typedef struct -{ - u16 TIM_Prescaler; - u16 TIM_CounterMode; - u16 TIM_Period; - u16 TIM_ClockDivision; - u8 TIM_RepetitionCounter; -} TIM_TimeBaseInitTypeDef; - -/* TIM Output Compare Init structure definition */ -typedef struct -{ - u16 TIM_OCMode; - u16 TIM_OutputState; - u16 TIM_OutputNState; - u16 TIM_Pulse; - u16 TIM_OCPolarity; - u16 TIM_OCNPolarity; - u16 TIM_OCIdleState; - u16 TIM_OCNIdleState; -} TIM_OCInitTypeDef; - -/* TIM Input Capture Init structure definition */ -typedef struct -{ - u16 TIM_Channel; - u16 TIM_ICPolarity; - u16 TIM_ICSelection; - u16 TIM_ICPrescaler; - u16 TIM_ICFilter; -} TIM_ICInitTypeDef; - -/* BDTR structure definition */ -typedef struct -{ - u16 TIM_OSSRState; - u16 TIM_OSSIState; - u16 TIM_LOCKLevel; - u16 TIM_DeadTime; - u16 TIM_Break; - u16 TIM_BreakPolarity; - u16 TIM_AutomaticOutput; -} TIM_BDTRInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -#define IS_TIM_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == TIM1_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM2_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM3_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM5_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM6_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM7_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM8_BASE)) - -#define IS_TIM_18_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == TIM1_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM8_BASE)) - -#define IS_TIM_123458_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == TIM1_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM2_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM3_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM5_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM8_BASE)) - -/* TIM Output Compare and PWM modes -----------------------------------------*/ -#define TIM_OCMode_Timing ((u16)0x0000) -#define TIM_OCMode_Active ((u16)0x0010) -#define TIM_OCMode_Inactive ((u16)0x0020) -#define TIM_OCMode_Toggle ((u16)0x0030) -#define TIM_OCMode_PWM1 ((u16)0x0060) -#define TIM_OCMode_PWM2 ((u16)0x0070) - -#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2)) - -#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2) || \ - ((MODE) == TIM_ForcedAction_Active) || \ - ((MODE) == TIM_ForcedAction_InActive)) -/* TIM One Pulse Mode -------------------------------------------------------*/ -#define TIM_OPMode_Single ((u16)0x0008) -#define TIM_OPMode_Repetitive ((u16)0x0000) - -#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ - ((MODE) == TIM_OPMode_Repetitive)) - -/* TIM Channel -------------------------------------------------------------*/ -#define TIM_Channel_1 ((u16)0x0000) -#define TIM_Channel_2 ((u16)0x0004) -#define TIM_Channel_3 ((u16)0x0008) -#define TIM_Channel_4 ((u16)0x000C) - -#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3) || \ - ((CHANNEL) == TIM_Channel_4)) - -#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2)) - -#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3)) -/* TIM Clock Division CKD --------------------------------------------------*/ -#define TIM_CKD_DIV1 ((u16)0x0000) -#define TIM_CKD_DIV2 ((u16)0x0100) -#define TIM_CKD_DIV4 ((u16)0x0200) - -#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ - ((DIV) == TIM_CKD_DIV2) || \ - ((DIV) == TIM_CKD_DIV4)) - -/* TIM Counter Mode --------------------------------------------------------*/ -#define TIM_CounterMode_Up ((u16)0x0000) -#define TIM_CounterMode_Down ((u16)0x0010) -#define TIM_CounterMode_CenterAligned1 ((u16)0x0020) -#define TIM_CounterMode_CenterAligned2 ((u16)0x0040) -#define TIM_CounterMode_CenterAligned3 ((u16)0x0060) - -#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ - ((MODE) == TIM_CounterMode_Down) || \ - ((MODE) == TIM_CounterMode_CenterAligned1) || \ - ((MODE) == TIM_CounterMode_CenterAligned2) || \ - ((MODE) == TIM_CounterMode_CenterAligned3)) - -/* TIM Output Compare Polarity ---------------------------------------------*/ -#define TIM_OCPolarity_High ((u16)0x0000) -#define TIM_OCPolarity_Low ((u16)0x0002) - -#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ - ((POLARITY) == TIM_OCPolarity_Low)) - -/* TIM Output Compare N Polarity -------------------------------------------*/ -#define TIM_OCNPolarity_High ((u16)0x0000) -#define TIM_OCNPolarity_Low ((u16)0x0008) - -#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ - ((POLARITY) == TIM_OCNPolarity_Low)) - -/* TIM Output Compare states -----------------------------------------------*/ -#define TIM_OutputState_Disable ((u16)0x0000) -#define TIM_OutputState_Enable ((u16)0x0001) - -#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ - ((STATE) == TIM_OutputState_Enable)) - -/* TIM Output Compare N States ---------------------------------------------*/ -#define TIM_OutputNState_Disable ((u16)0x0000) -#define TIM_OutputNState_Enable ((u16)0x0004) - -#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ - ((STATE) == TIM_OutputNState_Enable)) - -/* TIM Capture Compare States -----------------------------------------------*/ -#define TIM_CCx_Enable ((u16)0x0001) -#define TIM_CCx_Disable ((u16)0x0000) - -#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ - ((CCX) == TIM_CCx_Disable)) - -/* TIM Capture Compare N States --------------------------------------------*/ -#define TIM_CCxN_Enable ((u16)0x0004) -#define TIM_CCxN_Disable ((u16)0x0000) - -#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ - ((CCXN) == TIM_CCxN_Disable)) - -/* Break Input enable/disable -----------------------------------------------*/ -#define TIM_Break_Enable ((u16)0x1000) -#define TIM_Break_Disable ((u16)0x0000) - -#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ - ((STATE) == TIM_Break_Disable)) - -/* Break Polarity -----------------------------------------------------------*/ -#define TIM_BreakPolarity_Low ((u16)0x0000) -#define TIM_BreakPolarity_High ((u16)0x2000) - -#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ - ((POLARITY) == TIM_BreakPolarity_High)) - -/* TIM AOE Bit Set/Reset ---------------------------------------------------*/ -#define TIM_AutomaticOutput_Enable ((u16)0x4000) -#define TIM_AutomaticOutput_Disable ((u16)0x0000) - -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ - ((STATE) == TIM_AutomaticOutput_Disable)) -/* Lock levels --------------------------------------------------------------*/ -#define TIM_LOCKLevel_OFF ((u16)0x0000) -#define TIM_LOCKLevel_1 ((u16)0x0100) -#define TIM_LOCKLevel_2 ((u16)0x0200) -#define TIM_LOCKLevel_3 ((u16)0x0300) - -#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ - ((LEVEL) == TIM_LOCKLevel_1) || \ - ((LEVEL) == TIM_LOCKLevel_2) || \ - ((LEVEL) == TIM_LOCKLevel_3)) - -/* OSSI: Off-State Selection for Idle mode states ---------------------------*/ -#define TIM_OSSIState_Enable ((u16)0x0400) -#define TIM_OSSIState_Disable ((u16)0x0000) - -#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ - ((STATE) == TIM_OSSIState_Disable)) - -/* OSSR: Off-State Selection for Run mode states ----------------------------*/ -#define TIM_OSSRState_Enable ((u16)0x0800) -#define TIM_OSSRState_Disable ((u16)0x0000) - -#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ - ((STATE) == TIM_OSSRState_Disable)) - -/* TIM Output Compare Idle State -------------------------------------------*/ -#define TIM_OCIdleState_Set ((u16)0x0100) -#define TIM_OCIdleState_Reset ((u16)0x0000) - -#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ - ((STATE) == TIM_OCIdleState_Reset)) - -/* TIM Output Compare N Idle State -----------------------------------------*/ -#define TIM_OCNIdleState_Set ((u16)0x0200) -#define TIM_OCNIdleState_Reset ((u16)0x0000) - -#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ - ((STATE) == TIM_OCNIdleState_Reset)) - -/* TIM Input Capture Polarity ----------------------------------------------*/ -#define TIM_ICPolarity_Rising ((u16)0x0000) -#define TIM_ICPolarity_Falling ((u16)0x0002) - -#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ - ((POLARITY) == TIM_ICPolarity_Falling)) - -/* TIM Input Capture Selection ---------------------------------------------*/ -#define TIM_ICSelection_DirectTI ((u16)0x0001) -#define TIM_ICSelection_IndirectTI ((u16)0x0002) -#define TIM_ICSelection_TRC ((u16)0x0003) - -#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ - ((SELECTION) == TIM_ICSelection_IndirectTI) || \ - ((SELECTION) == TIM_ICSelection_TRC)) - -/* TIM Input Capture Prescaler ---------------------------------------------*/ -#define TIM_ICPSC_DIV1 ((u16)0x0000) -#define TIM_ICPSC_DIV2 ((u16)0x0004) -#define TIM_ICPSC_DIV4 ((u16)0x0008) -#define TIM_ICPSC_DIV8 ((u16)0x000C) - -#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ - ((PRESCALER) == TIM_ICPSC_DIV2) || \ - ((PRESCALER) == TIM_ICPSC_DIV4) || \ - ((PRESCALER) == TIM_ICPSC_DIV8)) - -/* TIM interrupt sources ---------------------------------------------------*/ -#define TIM_IT_Update ((u16)0x0001) -#define TIM_IT_CC1 ((u16)0x0002) -#define TIM_IT_CC2 ((u16)0x0004) -#define TIM_IT_CC3 ((u16)0x0008) -#define TIM_IT_CC4 ((u16)0x0010) -#define TIM_IT_COM ((u16)0x0020) -#define TIM_IT_Trigger ((u16)0x0040) -#define TIM_IT_Break ((u16)0x0080) - -#define IS_TIM_IT(IT) ((((IT) & (u16)0xFF00) == 0x0000) && ((IT) != 0x0000)) - -#define IS_TIM_PERIPH_IT(PERIPH, TIM_IT) ((((((*(u32*)&(PERIPH)) == TIM2_BASE) || (((*(u32*)&(PERIPH)) == TIM3_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM4_BASE)) || (((*(u32*)&(PERIPH)) == TIM5_BASE))))&& \ - (((TIM_IT) & (u16)0xFFA0) == 0x0000) && ((TIM_IT) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM1_BASE) || (((*(u32*)&(PERIPH)) == TIM8_BASE))))&& \ - (((TIM_IT) & (u16)0xFF00) == 0x0000) && ((TIM_IT) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM6_BASE) || (((*(u32*)&(PERIPH)) == TIM7_BASE))))&& \ - (((TIM_IT) & (u16)0xFFFE) == 0x0000) && ((TIM_IT) != 0x0000))) - -#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ - ((IT) == TIM_IT_CC1) || \ - ((IT) == TIM_IT_CC2) || \ - ((IT) == TIM_IT_CC3) || \ - ((IT) == TIM_IT_CC4) || \ - ((IT) == TIM_IT_COM) || \ - ((IT) == TIM_IT_Trigger) || \ - ((IT) == TIM_IT_Break)) - -/* TIM DMA Base address ----------------------------------------------------*/ -#define TIM_DMABase_CR1 ((u16)0x0000) -#define TIM_DMABase_CR2 ((u16)0x0001) -#define TIM_DMABase_SMCR ((u16)0x0002) -#define TIM_DMABase_DIER ((u16)0x0003) -#define TIM_DMABase_SR ((u16)0x0004) -#define TIM_DMABase_EGR ((u16)0x0005) -#define TIM_DMABase_CCMR1 ((u16)0x0006) -#define TIM_DMABase_CCMR2 ((u16)0x0007) -#define TIM_DMABase_CCER ((u16)0x0008) -#define TIM_DMABase_CNT ((u16)0x0009) -#define TIM_DMABase_PSC ((u16)0x000A) -#define TIM_DMABase_ARR ((u16)0x000B) -#define TIM_DMABase_RCR ((u16)0x000C) -#define TIM_DMABase_CCR1 ((u16)0x000D) -#define TIM_DMABase_CCR2 ((u16)0x000E) -#define TIM_DMABase_CCR3 ((u16)0x000F) -#define TIM_DMABase_CCR4 ((u16)0x0010) -#define TIM_DMABase_BDTR ((u16)0x0011) -#define TIM_DMABase_DCR ((u16)0x0012) - -#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ - ((BASE) == TIM_DMABase_CR2) || \ - ((BASE) == TIM_DMABase_SMCR) || \ - ((BASE) == TIM_DMABase_DIER) || \ - ((BASE) == TIM_DMABase_SR) || \ - ((BASE) == TIM_DMABase_EGR) || \ - ((BASE) == TIM_DMABase_CCMR1) || \ - ((BASE) == TIM_DMABase_CCMR2) || \ - ((BASE) == TIM_DMABase_CCER) || \ - ((BASE) == TIM_DMABase_CNT) || \ - ((BASE) == TIM_DMABase_PSC) || \ - ((BASE) == TIM_DMABase_ARR) || \ - ((BASE) == TIM_DMABase_RCR) || \ - ((BASE) == TIM_DMABase_CCR1) || \ - ((BASE) == TIM_DMABase_CCR2) || \ - ((BASE) == TIM_DMABase_CCR3) || \ - ((BASE) == TIM_DMABase_CCR4) || \ - ((BASE) == TIM_DMABase_BDTR) || \ - ((BASE) == TIM_DMABase_DCR)) - -/* TIM DMA Burst Length ----------------------------------------------------*/ -#define TIM_DMABurstLength_1Byte ((u16)0x0000) -#define TIM_DMABurstLength_2Bytes ((u16)0x0100) -#define TIM_DMABurstLength_3Bytes ((u16)0x0200) -#define TIM_DMABurstLength_4Bytes ((u16)0x0300) -#define TIM_DMABurstLength_5Bytes ((u16)0x0400) -#define TIM_DMABurstLength_6Bytes ((u16)0x0500) -#define TIM_DMABurstLength_7Bytes ((u16)0x0600) -#define TIM_DMABurstLength_8Bytes ((u16)0x0700) -#define TIM_DMABurstLength_9Bytes ((u16)0x0800) -#define TIM_DMABurstLength_10Bytes ((u16)0x0900) -#define TIM_DMABurstLength_11Bytes ((u16)0x0A00) -#define TIM_DMABurstLength_12Bytes ((u16)0x0B00) -#define TIM_DMABurstLength_13Bytes ((u16)0x0C00) -#define TIM_DMABurstLength_14Bytes ((u16)0x0D00) -#define TIM_DMABurstLength_15Bytes ((u16)0x0E00) -#define TIM_DMABurstLength_16Bytes ((u16)0x0F00) -#define TIM_DMABurstLength_17Bytes ((u16)0x1000) -#define TIM_DMABurstLength_18Bytes ((u16)0x1100) - -#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Byte) || \ - ((LENGTH) == TIM_DMABurstLength_2Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_3Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_4Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_5Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_6Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_7Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_8Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_9Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_10Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_11Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_12Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_13Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_14Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_15Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_16Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_17Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_18Bytes)) - -/* TIM DMA sources ---------------------------------------------------------*/ -#define TIM_DMA_Update ((u16)0x0100) -#define TIM_DMA_CC1 ((u16)0x0200) -#define TIM_DMA_CC2 ((u16)0x0400) -#define TIM_DMA_CC3 ((u16)0x0800) -#define TIM_DMA_CC4 ((u16)0x1000) -#define TIM_DMA_COM ((u16)0x2000) -#define TIM_DMA_Trigger ((u16)0x4000) - -#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (u16)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) - -#define IS_TIM_PERIPH_DMA(PERIPH, SOURCE) ((((((*(u32*)&(PERIPH)) == TIM2_BASE) || (((*(u32*)&(PERIPH)) == TIM3_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM4_BASE)) || (((*(u32*)&(PERIPH)) == TIM5_BASE))))&& \ - (((SOURCE) & (u16)0xA0FF) == 0x0000) && ((SOURCE) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM1_BASE) || (((*(u32*)&(PERIPH)) == TIM8_BASE))))&& \ - (((SOURCE) & (u16)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM6_BASE) || (((*(u32*)&(PERIPH)) == TIM7_BASE))))&& \ - (((SOURCE) & (u16)0xFEFF) == 0x0000) && ((SOURCE) != 0x0000))) - -/* TIM External Trigger Prescaler ------------------------------------------*/ -#define TIM_ExtTRGPSC_OFF ((u16)0x0000) -#define TIM_ExtTRGPSC_DIV2 ((u16)0x1000) -#define TIM_ExtTRGPSC_DIV4 ((u16)0x2000) -#define TIM_ExtTRGPSC_DIV8 ((u16)0x3000) - -#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) - -/* TIM Internal Trigger Selection ------------------------------------------*/ -#define TIM_TS_ITR0 ((u16)0x0000) -#define TIM_TS_ITR1 ((u16)0x0010) -#define TIM_TS_ITR2 ((u16)0x0020) -#define TIM_TS_ITR3 ((u16)0x0030) -#define TIM_TS_TI1F_ED ((u16)0x0040) -#define TIM_TS_TI1FP1 ((u16)0x0050) -#define TIM_TS_TI2FP2 ((u16)0x0060) -#define TIM_TS_ETRF ((u16)0x0070) - -#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3) || \ - ((SELECTION) == TIM_TS_TI1F_ED) || \ - ((SELECTION) == TIM_TS_TI1FP1) || \ - ((SELECTION) == TIM_TS_TI2FP2) || \ - ((SELECTION) == TIM_TS_ETRF)) - -#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3)) - -/* TIM TIx External Clock Source -------------------------------------------*/ -#define TIM_TIxExternalCLK1Source_TI1 ((u16)0x0050) -#define TIM_TIxExternalCLK1Source_TI2 ((u16)0x0060) -#define TIM_TIxExternalCLK1Source_TI1ED ((u16)0x0040) - -#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \ - ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \ - ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED)) - -/* TIM External Trigger Polarity -------------------------------------------*/ -#define TIM_ExtTRGPolarity_Inverted ((u16)0x8000) -#define TIM_ExtTRGPolarity_NonInverted ((u16)0x0000) - -#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ - ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) - -/* TIM Prescaler Reload Mode -----------------------------------------------*/ -#define TIM_PSCReloadMode_Update ((u16)0x0000) -#define TIM_PSCReloadMode_Immediate ((u16)0x0001) - -#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ - ((RELOAD) == TIM_PSCReloadMode_Immediate)) - -/* TIM Forced Action -------------------------------------------------------*/ -#define TIM_ForcedAction_Active ((u16)0x0050) -#define TIM_ForcedAction_InActive ((u16)0x0040) - -#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ - ((ACTION) == TIM_ForcedAction_InActive)) - -/* TIM Encoder Mode --------------------------------------------------------*/ -#define TIM_EncoderMode_TI1 ((u16)0x0001) -#define TIM_EncoderMode_TI2 ((u16)0x0002) -#define TIM_EncoderMode_TI12 ((u16)0x0003) - -#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ - ((MODE) == TIM_EncoderMode_TI2) || \ - ((MODE) == TIM_EncoderMode_TI12)) - -/* TIM Event Source --------------------------------------------------------*/ -#define TIM_EventSource_Update ((u16)0x0001) -#define TIM_EventSource_CC1 ((u16)0x0002) -#define TIM_EventSource_CC2 ((u16)0x0004) -#define TIM_EventSource_CC3 ((u16)0x0008) -#define TIM_EventSource_CC4 ((u16)0x0010) -#define TIM_EventSource_COM ((u16)0x0020) -#define TIM_EventSource_Trigger ((u16)0x0040) -#define TIM_EventSource_Break ((u16)0x0080) - -#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (u16)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) - -#define IS_TIM_PERIPH_EVENT(PERIPH, EVENT) ((((((*(u32*)&(PERIPH)) == TIM2_BASE) || (((*(u32*)&(PERIPH)) == TIM3_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM4_BASE)) || (((*(u32*)&(PERIPH)) == TIM5_BASE))))&& \ - (((EVENT) & (u16)0xFFA0) == 0x0000) && ((EVENT) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM1_BASE) || (((*(u32*)&(PERIPH)) == TIM8_BASE))))&& \ - (((EVENT) & (u16)0xFF00) == 0x0000) && ((EVENT) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM6_BASE) || (((*(u32*)&(PERIPH)) == TIM7_BASE))))&& \ - (((EVENT) & (u16)0xFFFE) == 0x0000) && ((EVENT) != 0x0000))) - -/* TIM Update Source --------------------------------------------------------*/ -#define TIM_UpdateSource_Global ((u16)0x0000) -#define TIM_UpdateSource_Regular ((u16)0x0001) - -#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ - ((SOURCE) == TIM_UpdateSource_Regular)) - -/* TIM Ouput Compare Preload State ------------------------------------------*/ -#define TIM_OCPreload_Enable ((u16)0x0008) -#define TIM_OCPreload_Disable ((u16)0x0000) - -#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ - ((STATE) == TIM_OCPreload_Disable)) - -/* TIM Ouput Compare Fast State ---------------------------------------------*/ -#define TIM_OCFast_Enable ((u16)0x0004) -#define TIM_OCFast_Disable ((u16)0x0000) - -#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ - ((STATE) == TIM_OCFast_Disable)) - -/* TIM Ouput Compare Clear State --------------------------------------------*/ -#define TIM_OCClear_Enable ((u16)0x0080) -#define TIM_OCClear_Disable ((u16)0x0000) - -#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ - ((STATE) == TIM_OCClear_Disable)) - -/* TIM Trigger Output Source ------------------------------------------------*/ -#define TIM_TRGOSource_Reset ((u16)0x0000) -#define TIM_TRGOSource_Enable ((u16)0x0010) -#define TIM_TRGOSource_Update ((u16)0x0020) -#define TIM_TRGOSource_OC1 ((u16)0x0030) -#define TIM_TRGOSource_OC1Ref ((u16)0x0040) -#define TIM_TRGOSource_OC2Ref ((u16)0x0050) -#define TIM_TRGOSource_OC3Ref ((u16)0x0060) -#define TIM_TRGOSource_OC4Ref ((u16)0x0070) - -#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ - ((SOURCE) == TIM_TRGOSource_Enable) || \ - ((SOURCE) == TIM_TRGOSource_Update) || \ - ((SOURCE) == TIM_TRGOSource_OC1) || \ - ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC4Ref)) - -#define IS_TIM_PERIPH_TRGO(PERIPH, TRGO) (((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM6_BASE))||(((*(u32*)&(PERIPH)) == TIM7_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_Reset)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM6_BASE))||(((*(u32*)&(PERIPH)) == TIM7_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_Enable)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM6_BASE))||(((*(u32*)&(PERIPH)) == TIM7_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_Update)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC1)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC1Ref)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC2Ref)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC3Ref)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC4Ref))) - -/* TIM Slave Mode ----------------------------------------------------------*/ -#define TIM_SlaveMode_Reset ((u16)0x0004) -#define TIM_SlaveMode_Gated ((u16)0x0005) -#define TIM_SlaveMode_Trigger ((u16)0x0006) -#define TIM_SlaveMode_External1 ((u16)0x0007) - -#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ - ((MODE) == TIM_SlaveMode_Gated) || \ - ((MODE) == TIM_SlaveMode_Trigger) || \ - ((MODE) == TIM_SlaveMode_External1)) - -/* TIM Master Slave Mode ---------------------------------------------------*/ -#define TIM_MasterSlaveMode_Enable ((u16)0x0080) -#define TIM_MasterSlaveMode_Disable ((u16)0x0000) - -#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ - ((STATE) == TIM_MasterSlaveMode_Disable)) - -/* TIM Flags ---------------------------------------------------------------*/ -#define TIM_FLAG_Update ((u16)0x0001) -#define TIM_FLAG_CC1 ((u16)0x0002) -#define TIM_FLAG_CC2 ((u16)0x0004) -#define TIM_FLAG_CC3 ((u16)0x0008) -#define TIM_FLAG_CC4 ((u16)0x0010) -#define TIM_FLAG_COM ((u16)0x0020) -#define TIM_FLAG_Trigger ((u16)0x0040) -#define TIM_FLAG_Break ((u16)0x0080) -#define TIM_FLAG_CC1OF ((u16)0x0200) -#define TIM_FLAG_CC2OF ((u16)0x0400) -#define TIM_FLAG_CC3OF ((u16)0x0800) -#define TIM_FLAG_CC4OF ((u16)0x1000) - -#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ - ((FLAG) == TIM_FLAG_CC1) || \ - ((FLAG) == TIM_FLAG_CC2) || \ - ((FLAG) == TIM_FLAG_CC3) || \ - ((FLAG) == TIM_FLAG_CC4) || \ - ((FLAG) == TIM_FLAG_COM) || \ - ((FLAG) == TIM_FLAG_Trigger) || \ - ((FLAG) == TIM_FLAG_Break) || \ - ((FLAG) == TIM_FLAG_CC1OF) || \ - ((FLAG) == TIM_FLAG_CC2OF) || \ - ((FLAG) == TIM_FLAG_CC3OF) || \ - ((FLAG) == TIM_FLAG_CC4OF)) - -#define IS_TIM_CLEAR_FLAG(PERIPH, TIM_FLAG) ((((((*(u32*)&(PERIPH)) == TIM2_BASE) || (((*(u32*)&(PERIPH)) == TIM3_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM4_BASE)) || (((*(u32*)&(PERIPH)) == TIM5_BASE))))&& \ - (((TIM_FLAG) & (u16)0xE1A0) == 0x0000) && ((TIM_FLAG) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM1_BASE) || (((*(u32*)&(PERIPH)) == TIM8_BASE))))&& \ - (((TIM_FLAG) & (u16)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM6_BASE) || (((*(u32*)&(PERIPH)) == TIM7_BASE))))&& \ - (((TIM_FLAG) & (u16)0xFFFE) == 0x0000) && ((TIM_FLAG) != 0x0000))) - -#define IS_TIM_PERIPH_FLAG(PERIPH, TIM_FLAG) (((((*(u32*)&(PERIPH))==TIM2_BASE) || ((*(u32*)&(PERIPH)) == TIM3_BASE) ||\ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || ((*(u32*)&(PERIPH))==TIM5_BASE) || \ - ((*(u32*)&(PERIPH))==TIM1_BASE) || ((*(u32*)&(PERIPH))==TIM8_BASE)) &&\ - (((TIM_FLAG) == TIM_FLAG_CC1) || ((TIM_FLAG) == TIM_FLAG_CC2) ||\ - ((TIM_FLAG) == TIM_FLAG_CC3) || ((TIM_FLAG) == TIM_FLAG_CC4) || \ - ((TIM_FLAG) == TIM_FLAG_Trigger))) ||\ - ((((*(u32*)&(PERIPH))==TIM2_BASE) || ((*(u32*)&(PERIPH)) == TIM3_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || ((*(u32*)&(PERIPH))==TIM5_BASE) ||\ - ((*(u32*)&(PERIPH))==TIM1_BASE)|| ((*(u32*)&(PERIPH))==TIM8_BASE) || \ - ((*(u32*)&(PERIPH))==TIM7_BASE) || ((*(u32*)&(PERIPH))==TIM6_BASE)) && \ - (((TIM_FLAG) == TIM_FLAG_Update))) ||\ - ((((*(u32*)&(PERIPH))==TIM1_BASE) || ((*(u32*)&(PERIPH)) == TIM8_BASE)) &&\ - (((TIM_FLAG) == TIM_FLAG_COM) || ((TIM_FLAG) == TIM_FLAG_Break))) ||\ - ((((*(u32*)&(PERIPH))==TIM2_BASE) || ((*(u32*)&(PERIPH)) == TIM3_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || ((*(u32*)&(PERIPH))==TIM5_BASE) || \ - ((*(u32*)&(PERIPH))==TIM1_BASE) || ((*(u32*)&(PERIPH))==TIM8_BASE)) &&\ - (((TIM_FLAG) == TIM_FLAG_CC1OF) || ((TIM_FLAG) == TIM_FLAG_CC2OF) ||\ - ((TIM_FLAG) == TIM_FLAG_CC3OF) || ((TIM_FLAG) == TIM_FLAG_CC4OF)))) - -/* TIM Input Capture Filer Value ---------------------------------------------*/ -#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) - -/* TIM External Trigger Filter -----------------------------------------------*/ -#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -void TIM_DeInit(TIM_TypeDef* TIMx); -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_ITConfig(TIM_TypeDef* TIMx, u16 TIM_IT, FunctionalState NewState); -void TIM_GenerateEvent(TIM_TypeDef* TIMx, u16 TIM_EventSource); -void TIM_DMAConfig(TIM_TypeDef* TIMx, u16 TIM_DMABase, u16 TIM_DMABurstLength); -void TIM_DMACmd(TIM_TypeDef* TIMx, u16 TIM_DMASource, FunctionalState NewState); -void TIM_InternalClockConfig(TIM_TypeDef* TIMx); -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource); -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_TIxExternalCLKSource, - u16 TIM_ICPolarity, u16 ICFilter); -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, - u16 ExtTRGFilter); -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, - u16 TIM_ExtTRGPolarity, u16 ExtTRGFilter); -void TIM_ETRConfig(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, - u16 ExtTRGFilter); -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, u16 Prescaler, u16 TIM_PSCReloadMode); -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, u16 TIM_CounterMode); -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource); -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, u16 TIM_EncoderMode, - u16 TIM_IC1Polarity, u16 TIM_IC2Polarity); -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction); -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction); -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction); -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction); -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload); -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload); -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload); -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload); -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast); -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast); -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast); -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast); -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear); -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear); -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear); -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear); -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity); -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity); -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity); -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity); -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity); -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity); -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity); -void TIM_CCxCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCx); -void TIM_CCxNCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCxN); -void TIM_SelectOCxM(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_OCMode); -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, u16 TIM_UpdateSource); -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, u16 TIM_OPMode); -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, u16 TIM_TRGOSource); -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, u16 TIM_SlaveMode); -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, u16 TIM_MasterSlaveMode); -void TIM_SetCounter(TIM_TypeDef* TIMx, u16 Counter); -void TIM_SetAutoreload(TIM_TypeDef* TIMx, u16 Autoreload); -void TIM_SetCompare1(TIM_TypeDef* TIMx, u16 Compare1); -void TIM_SetCompare2(TIM_TypeDef* TIMx, u16 Compare2); -void TIM_SetCompare3(TIM_TypeDef* TIMx, u16 Compare3); -void TIM_SetCompare4(TIM_TypeDef* TIMx, u16 Compare4); -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC); -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC); -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC); -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC); -void TIM_SetClockDivision(TIM_TypeDef* TIMx, u16 TIM_CKD); -u16 TIM_GetCapture1(TIM_TypeDef* TIMx); -u16 TIM_GetCapture2(TIM_TypeDef* TIMx); -u16 TIM_GetCapture3(TIM_TypeDef* TIMx); -u16 TIM_GetCapture4(TIM_TypeDef* TIMx); -u16 TIM_GetCounter(TIM_TypeDef* TIMx); -u16 TIM_GetPrescaler(TIM_TypeDef* TIMx); -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, u16 TIM_FLAG); -void TIM_ClearFlag(TIM_TypeDef* TIMx, u16 TIM_FLAG); -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, u16 TIM_IT); -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, u16 TIM_IT); - -#endif /*__STM32F10x_TIM_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ - - - - - - - - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_type.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_type.h deleted file mode 100755 index f17d0c4..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_type.h +++ /dev/null @@ -1,80 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_type.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the common data types used for the -* STM32F10x firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_TYPE_H -#define __STM32F10x_TYPE_H - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -typedef signed long s32; -typedef signed short s16; -typedef signed char s8; - -typedef signed long const sc32; /* Read Only */ -typedef signed short const sc16; /* Read Only */ -typedef signed char const sc8; /* Read Only */ - -typedef volatile signed long vs32; -typedef volatile signed short vs16; -typedef volatile signed char vs8; - -typedef volatile signed long const vsc32; /* Read Only */ -typedef volatile signed short const vsc16; /* Read Only */ -typedef volatile signed char const vsc8; /* Read Only */ - -typedef unsigned long u32; -typedef unsigned short u16; -typedef unsigned char u8; - -typedef unsigned long const uc32; /* Read Only */ -typedef unsigned short const uc16; /* Read Only */ -typedef unsigned char const uc8; /* Read Only */ - -typedef volatile unsigned long vu32; -typedef volatile unsigned short vu16; -typedef volatile unsigned char vu8; - -typedef volatile unsigned long const vuc32; /* Read Only */ -typedef volatile unsigned short const vuc16; /* Read Only */ -typedef volatile unsigned char const vuc8; /* Read Only */ - -typedef enum {FALSE = 0, TRUE = !FALSE} bool; - -typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; - -typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; -#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) - -typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; - -#define U8_MAX ((u8)255) -#define S8_MAX ((s8)127) -#define S8_MIN ((s8)-128) -#define U16_MAX ((u16)65535u) -#define S16_MAX ((s16)32767) -#define S16_MIN ((s16)-32768) -#define U32_MAX ((u32)4294967295uL) -#define S32_MAX ((s32)2147483647) -#define S32_MIN ((s32)-2147483648) - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __STM32F10x_TYPE_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_usart.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_usart.h deleted file mode 100755 index cebc552..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_usart.h +++ /dev/null @@ -1,256 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_usart.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* USART firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_USART_H -#define __STM32F10x_USART_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* USART Init Structure definition */ -typedef struct -{ - u32 USART_BaudRate; - u16 USART_WordLength; - u16 USART_StopBits; - u16 USART_Parity; - u16 USART_Mode; - u16 USART_HardwareFlowControl; -} USART_InitTypeDef; - -/* USART Clock Init Structure definition */ -typedef struct -{ - u16 USART_Clock; - u16 USART_CPOL; - u16 USART_CPHA; - u16 USART_LastBit; -} USART_ClockInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -#define IS_USART_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == USART1_BASE) || \ - ((*(u32*)&(PERIPH)) == USART2_BASE) || \ - ((*(u32*)&(PERIPH)) == USART3_BASE) || \ - ((*(u32*)&(PERIPH)) == UART4_BASE) || \ - ((*(u32*)&(PERIPH)) == UART5_BASE)) - -#define IS_USART_123_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == USART1_BASE) || \ - ((*(u32*)&(PERIPH)) == USART2_BASE) || \ - ((*(u32*)&(PERIPH)) == USART3_BASE)) - -#define IS_USART_1234_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == USART1_BASE) || \ - ((*(u32*)&(PERIPH)) == USART2_BASE) || \ - ((*(u32*)&(PERIPH)) == USART3_BASE) || \ - ((*(u32*)&(PERIPH)) == UART4_BASE)) - -/* USART Word Length ---------------------------------------------------------*/ -#define USART_WordLength_8b ((u16)0x0000) -#define USART_WordLength_9b ((u16)0x1000) - -#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ - ((LENGTH) == USART_WordLength_9b)) - -/* USART Stop Bits -----------------------------------------------------------*/ -#define USART_StopBits_1 ((u16)0x0000) -#define USART_StopBits_0_5 ((u16)0x1000) -#define USART_StopBits_2 ((u16)0x2000) -#define USART_StopBits_1_5 ((u16)0x3000) - -#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ - ((STOPBITS) == USART_StopBits_0_5) || \ - ((STOPBITS) == USART_StopBits_2) || \ - ((STOPBITS) == USART_StopBits_1_5)) -/* USART Parity --------------------------------------------------------------*/ -#define USART_Parity_No ((u16)0x0000) -#define USART_Parity_Even ((u16)0x0400) -#define USART_Parity_Odd ((u16)0x0600) - -#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ - ((PARITY) == USART_Parity_Even) || \ - ((PARITY) == USART_Parity_Odd)) - -/* USART Mode ----------------------------------------------------------------*/ -#define USART_Mode_Rx ((u16)0x0004) -#define USART_Mode_Tx ((u16)0x0008) - -#define IS_USART_MODE(MODE) ((((MODE) & (u16)0xFFF3) == 0x00) && ((MODE) != (u16)0x00)) - -/* USART Hardware Flow Control -----------------------------------------------*/ -#define USART_HardwareFlowControl_None ((u16)0x0000) -#define USART_HardwareFlowControl_RTS ((u16)0x0100) -#define USART_HardwareFlowControl_CTS ((u16)0x0200) -#define USART_HardwareFlowControl_RTS_CTS ((u16)0x0300) - -#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ - (((CONTROL) == USART_HardwareFlowControl_None) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS) || \ - ((CONTROL) == USART_HardwareFlowControl_CTS) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) - -#define IS_USART_PERIPH_HFC(PERIPH, HFC) ((((*(u32*)&(PERIPH)) != UART4_BASE) && \ - ((*(u32*)&(PERIPH)) != UART5_BASE)) \ - || ((HFC) == USART_HardwareFlowControl_None)) - -/* USART Clock ---------------------------------------------------------------*/ -#define USART_Clock_Disable ((u16)0x0000) -#define USART_Clock_Enable ((u16)0x0800) - -#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ - ((CLOCK) == USART_Clock_Enable)) - -/* USART Clock Polarity ------------------------------------------------------*/ -#define USART_CPOL_Low ((u16)0x0000) -#define USART_CPOL_High ((u16)0x0400) - -#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) - -/* USART Clock Phase ---------------------------------------------------------*/ -#define USART_CPHA_1Edge ((u16)0x0000) -#define USART_CPHA_2Edge ((u16)0x0200) -#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) - -/* USART Last Bit ------------------------------------------------------------*/ -#define USART_LastBit_Disable ((u16)0x0000) -#define USART_LastBit_Enable ((u16)0x0100) - -#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ - ((LASTBIT) == USART_LastBit_Enable)) - -/* USART Interrupt definition ------------------------------------------------*/ -#define USART_IT_PE ((u16)0x0028) -#define USART_IT_TXE ((u16)0x0727) -#define USART_IT_TC ((u16)0x0626) -#define USART_IT_RXNE ((u16)0x0525) -#define USART_IT_IDLE ((u16)0x0424) -#define USART_IT_LBD ((u16)0x0846) -#define USART_IT_CTS ((u16)0x096A) -#define USART_IT_ERR ((u16)0x0060) -#define USART_IT_ORE ((u16)0x0360) -#define USART_IT_NE ((u16)0x0260) -#define USART_IT_FE ((u16)0x0160) - -#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) - -#define IS_USART_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ - ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) - -#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TC) || \ - ((IT) == USART_IT_RXNE) || ((IT) == USART_IT_IDLE) || \ - ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS) || \ - ((IT) == USART_IT_ORE) || ((IT) == USART_IT_NE) || \ - ((IT) == USART_IT_FE)) - -#define IS_USART_PERIPH_IT(PERIPH, USART_IT) ((((*(u32*)&(PERIPH)) != UART4_BASE) && \ - ((*(u32*)&(PERIPH)) != UART5_BASE)) \ - || ((USART_IT) != USART_IT_CTS)) - -/* USART DMA Requests --------------------------------------------------------*/ -#define USART_DMAReq_Tx ((u16)0x0080) -#define USART_DMAReq_Rx ((u16)0x0040) - -#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (u16)0xFF3F) == 0x00) && ((DMAREQ) != (u16)0x00)) - -/* USART WakeUp methods ------------------------------------------------------*/ -#define USART_WakeUp_IdleLine ((u16)0x0000) -#define USART_WakeUp_AddressMark ((u16)0x0800) - -#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ - ((WAKEUP) == USART_WakeUp_AddressMark)) - -/* USART LIN Break Detection Length ------------------------------------------*/ -#define USART_LINBreakDetectLength_10b ((u16)0x0000) -#define USART_LINBreakDetectLength_11b ((u16)0x0020) - -#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ - (((LENGTH) == USART_LINBreakDetectLength_10b) || \ - ((LENGTH) == USART_LINBreakDetectLength_11b)) - -/* USART IrDA Low Power ------------------------------------------------------*/ -#define USART_IrDAMode_LowPower ((u16)0x0004) -#define USART_IrDAMode_Normal ((u16)0x0000) - -#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ - ((MODE) == USART_IrDAMode_Normal)) - -/* USART Flags ---------------------------------------------------------------*/ -#define USART_FLAG_CTS ((u16)0x0200) -#define USART_FLAG_LBD ((u16)0x0100) -#define USART_FLAG_TXE ((u16)0x0080) -#define USART_FLAG_TC ((u16)0x0040) -#define USART_FLAG_RXNE ((u16)0x0020) -#define USART_FLAG_IDLE ((u16)0x0010) -#define USART_FLAG_ORE ((u16)0x0008) -#define USART_FLAG_NE ((u16)0x0004) -#define USART_FLAG_FE ((u16)0x0002) -#define USART_FLAG_PE ((u16)0x0001) - -#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ - ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ - ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ - ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ - ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) - -#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (u16)0xFC80) == 0x00) && ((FLAG) != (u16)0x00)) - -#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(u32*)&(PERIPH)) != UART4_BASE) &&\ - ((*(u32*)&(PERIPH)) != UART5_BASE)) \ - || ((USART_FLAG) != USART_FLAG_CTS)) - -#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21)) -#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) -#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void USART_DeInit(USART_TypeDef* USARTx); -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); -void USART_StructInit(USART_InitTypeDef* USART_InitStruct); -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_ITConfig(USART_TypeDef* USARTx, u16 USART_IT, FunctionalState NewState); -void USART_DMACmd(USART_TypeDef* USARTx, u16 USART_DMAReq, FunctionalState NewState); -void USART_SetAddress(USART_TypeDef* USARTx, u8 USART_Address); -void USART_WakeUpConfig(USART_TypeDef* USARTx, u16 USART_WakeUp); -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, u16 USART_LINBreakDetectLength); -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SendData(USART_TypeDef* USARTx, u16 Data); -u16 USART_ReceiveData(USART_TypeDef* USARTx); -void USART_SendBreak(USART_TypeDef* USARTx); -void USART_SetGuardTime(USART_TypeDef* USARTx, u8 USART_GuardTime); -void USART_SetPrescaler(USART_TypeDef* USARTx, u8 USART_Prescaler); -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_IrDAConfig(USART_TypeDef* USARTx, u16 USART_IrDAMode); -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, u16 USART_FLAG); -void USART_ClearFlag(USART_TypeDef* USARTx, u16 USART_FLAG); -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, u16 USART_IT); -void USART_ClearITPendingBit(USART_TypeDef* USARTx, u16 USART_IT); - -#endif /* __STM32F10x_USART_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_wwdg.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_wwdg.h deleted file mode 100755 index 3a80626..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/inc/stm32f10x_wwdg.h +++ /dev/null @@ -1,54 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_wwdg.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains all the functions prototypes for the -* WWDG firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_WWDG_H -#define __STM32F10x_WWDG_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* WWDG Prescaler */ -#define WWDG_Prescaler_1 ((u32)0x00000000) -#define WWDG_Prescaler_2 ((u32)0x00000080) -#define WWDG_Prescaler_4 ((u32)0x00000100) -#define WWDG_Prescaler_8 ((u32)0x00000180) - -#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \ - ((PRESCALER) == WWDG_Prescaler_2) || \ - ((PRESCALER) == WWDG_Prescaler_4) || \ - ((PRESCALER) == WWDG_Prescaler_8)) - -#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F) - -#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void WWDG_DeInit(void); -void WWDG_SetPrescaler(u32 WWDG_Prescaler); -void WWDG_SetWindowValue(u8 WindowValue); -void WWDG_EnableIT(void); -void WWDG_SetCounter(u8 Counter); -void WWDG_Enable(u8 Counter); -FlagStatus WWDG_GetFlagStatus(void); -void WWDG_ClearFlag(void); - -#endif /* __STM32F10x_WWDG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/cortexm3_macro.s b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/cortexm3_macro.s deleted file mode 100755 index b67be2e..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/cortexm3_macro.s +++ /dev/null @@ -1,297 +0,0 @@ -/*;******************** (C) COPYRIGHT 2007 STMicroelectronics ****************** -;* File Name : cortexm3_macro.s -;* Author : MCD Application Team -;* Version : V1.0 -;* Date : 10/08/2007 -;* Description : Instruction wrappers for special Cortex-M3 instructions. -;******************************************************************************* -; THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************/ - .cpu cortex-m3 -.fpu softvfp -.syntax unified -.thumb -.text - - /*; Exported functions*/ - .globl __WFI - .globl __WFE - .globl __SEV - .globl __ISB - .globl __DSB - .globl __DMB - .globl __SVC - .globl __MRS_CONTROL - .globl __MSR_CONTROL - .globl __MRS_PSP - .globl __MSR_PSP - .globl __MRS_MSP - .globl __MSR_MSP - .globl __SETPRIMASK - .globl __RESETPRIMASK - .globl __SETFAULTMASK - .globl __RESETFAULTMASK - .globl __BASEPRICONFIG - .globl __GetBASEPRI - .globl __REV_HalfWord - .globl __REV_Word - -/*;***************************************************************************** -; Function Name : __WFI -; Description : Assembler function for the WFI instruction. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__WFI: - - WFI - BX r14 - -/*;***************************************************************************** -; Function Name : __WFE -; Description : Assembler function for the WFE instruction. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__WFE: - - WFE - BX r14 - -/*;***************************************************************************** -; Function Name : __SEV -; Description : Assembler function for the SEV instruction. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__SEV: - - SEV - BX r14 - -/*;***************************************************************************** -; Function Name : __ISB -; Description : Assembler function for the ISB instruction. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__ISB: - - ISB - BX r14 - -/*;***************************************************************************** -; Function Name : __DSB -; Description : Assembler function for the DSB instruction. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__DSB: - - DSB - BX r14 - -/*;***************************************************************************** -; Function Name : __DMB -; Description : Assembler function for the DMB instruction. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__DMB: - - DMB - BX r14 - -/*;***************************************************************************** -; Function Name : __SVC -; Description : Assembler function for the SVC instruction. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__SVC: - - SVC 0x01 - BX r14 - -/*;***************************************************************************** -; Function Name : __MRS_CONTROL -; Description : Assembler function for the MRS instruction. -; Input : None -; Return : - r4 : Cortex-M3 CONTROL register value. -;******************************************************************************/ -.thumb_func -__MRS_CONTROL: - - MRS r0,control - BX r14 - -/*;***************************************************************************** -; Function Name : __MSR_CONTROL -; Description : Assembler function for the MSR instruction. -; Input : - R0 : Cortex-M3 CONTROL register new value. -; Return : None -;******************************************************************************/ -.thumb_func -__MSR_CONTROL: - - MSR control, r0 - ISB - BX r14 -/*;***************************************************************************** -; Function Name : __MRS_PSP -; Description : Assembler function for the MRS instruction. -; Input : None -; Return : - r0 : Process Stack value. -;******************************************************************************/ -.thumb_func -__MRS_PSP: - - MRS r0, psp - BX r14 - -/*;***************************************************************************** -; Function Name : __MSR_PSP -; Description : Assembler function for the MSR instruction. -; Input : - r0 : Process Stack new value. -; Return : None -;******************************************************************************/ -.thumb_func -__MSR_PSP: - - MSR psp, r0 /* set Process Stack value*/ - BX r14 - -/*;***************************************************************************** -; Function Name : __MRS_MSP -; Description : Assembler function for the MRS instruction. -; Input : None -; Return : - r0 : Main Stack value. -;******************************************************************************/ -.thumb_func -__MRS_MSP: - - MRS r0, msp - BX r14 - -/*;***************************************************************************** -; Function Name : __MSR_MSP -; Description : Assembler function for the MSR instruction. -; Input : - r0 : Main Stack new value. -; Return : None -;******************************************************************************/ -.thumb_func -__MSR_MSP: - - MSR msp, r0 /*; set Main Stack value*/ - BX r14 -/*;***************************************************************************** -; Function Name : __SETPRIMASK -; Description : Assembler function to set the PRIMASK. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__SETPRIMASK: - - CPSID i - BX r14 - -/*;***************************************************************************** -; Function Name : __RESETPRIMASK -; Description : Assembler function to reset the PRIMASK. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__RESETPRIMASK: - - CPSIE i - BX r14 - -/*;***************************************************************************** -; Function Name : __SETFAULTMASK -; Description : Assembler function to set the FAULTMASK. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__SETFAULTMASK: - - CPSID f - BX r14 - -/*;***************************************************************************** -; Function Name : __RESETFAULTMASK -; Description : Assembler function to reset the FAULTMASK. -; Input : None -; Return : None -;******************************************************************************/ -.thumb_func -__RESETFAULTMASK: - - CPSIE f - BX r14 - -/*;***************************************************************************** -; Function Name : __BASEPRICONFIG -; Description : Assembler function to set the Base Priority. -; Input : - r0 : Base Priority new value -; Return : None -;******************************************************************************/ -.thumb_func -__BASEPRICONFIG: - - MSR basepri, r0 - BX r14 - -/*;***************************************************************************** -; Function Name : __GetBASEPRI -; Description : Assembler function to get the Base Priority value. -; Input : None -; Return : - r0 : Base Priority value -;******************************************************************************/ -.thumb_func -__GetBASEPRI: - - MRS r0, basepri_max - BX r14 -/*;***************************************************************************** -; Function Name : __REV_HalfWord -; Description : Reverses the byte order in HalfWord(16-bit) input variable. -; Input : - r0 : specifies the input variable -; Return : - r0 : holds tve variable value after byte reversing. -;******************************************************************************/ -.thumb_func -__REV_HalfWord: - - REV16 r0, r0 - BX r14 - -/*;***************************************************************************** -; Function Name : __REV_Word -; Description : Reverses the byte order in Word(32-bit) input variable. -; Input : - r0 : specifies the input variable -; Return : - r0 : holds tve variable value after byte reversing. -;******************************************************************************/ -.thumb_func -__REV_Word: - - REV r0, r0 - BX r14 - -.end - - -/*;*************** (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE******/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_adc.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_adc.c deleted file mode 100755 index 47be673..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_adc.c +++ /dev/null @@ -1,1402 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_adc.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the ADC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_adc.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ADC DISCNUM mask */ -#define CR1_DISCNUM_Reset ((u32)0xFFFF1FFF) - -/* ADC DISCEN mask */ -#define CR1_DISCEN_Set ((u32)0x00000800) -#define CR1_DISCEN_Reset ((u32)0xFFFFF7FF) - -/* ADC JAUTO mask */ -#define CR1_JAUTO_Set ((u32)0x00000400) -#define CR1_JAUTO_Reset ((u32)0xFFFFFBFF) - -/* ADC JDISCEN mask */ -#define CR1_JDISCEN_Set ((u32)0x00001000) -#define CR1_JDISCEN_Reset ((u32)0xFFFFEFFF) - -/* ADC AWDCH mask */ -#define CR1_AWDCH_Reset ((u32)0xFFFFFFE0) - -/* ADC Analog watchdog enable mode mask */ -#define CR1_AWDMode_Reset ((u32)0xFF3FFDFF) - -/* CR1 register Mask */ -#define CR1_CLEAR_Mask ((u32)0xFFF0FEFF) - -/* ADC ADON mask */ -#define CR2_ADON_Set ((u32)0x00000001) -#define CR2_ADON_Reset ((u32)0xFFFFFFFE) - -/* ADC DMA mask */ -#define CR2_DMA_Set ((u32)0x00000100) -#define CR2_DMA_Reset ((u32)0xFFFFFEFF) - -/* ADC RSTCAL mask */ -#define CR2_RSTCAL_Set ((u32)0x00000008) - -/* ADC CAL mask */ -#define CR2_CAL_Set ((u32)0x00000004) - -/* ADC SWSTART mask */ -#define CR2_SWSTART_Set ((u32)0x00400000) - -/* ADC EXTTRIG mask */ -#define CR2_EXTTRIG_Set ((u32)0x00100000) -#define CR2_EXTTRIG_Reset ((u32)0xFFEFFFFF) - -/* ADC Software start mask */ -#define CR2_EXTTRIG_SWSTART_Set ((u32)0x00500000) -#define CR2_EXTTRIG_SWSTART_Reset ((u32)0xFFAFFFFF) - -/* ADC JEXTSEL mask */ -#define CR2_JEXTSEL_Reset ((u32)0xFFFF8FFF) - -/* ADC JEXTTRIG mask */ -#define CR2_JEXTTRIG_Set ((u32)0x00008000) -#define CR2_JEXTTRIG_Reset ((u32)0xFFFF7FFF) - -/* ADC JSWSTART mask */ -#define CR2_JSWSTART_Set ((u32)0x00200000) - -/* ADC injected software start mask */ -#define CR2_JEXTTRIG_JSWSTART_Set ((u32)0x00208000) -#define CR2_JEXTTRIG_JSWSTART_Reset ((u32)0xFFDF7FFF) - -/* ADC TSPD mask */ -#define CR2_TSVREFE_Set ((u32)0x00800000) -#define CR2_TSVREFE_Reset ((u32)0xFF7FFFFF) - -/* CR2 register Mask */ -#define CR2_CLEAR_Mask ((u32)0xFFF1F7FD) - -/* ADC SQx mask */ -#define SQR3_SQ_Set ((u32)0x0000001F) -#define SQR2_SQ_Set ((u32)0x0000001F) -#define SQR1_SQ_Set ((u32)0x0000001F) - -/* SQR1 register Mask */ -#define SQR1_CLEAR_Mask ((u32)0xFF0FFFFF) - -/* ADC JSQx mask */ -#define JSQR_JSQ_Set ((u32)0x0000001F) - -/* ADC JL mask */ -#define JSQR_JL_Set ((u32)0x00300000) -#define JSQR_JL_Reset ((u32)0xFFCFFFFF) - -/* ADC SMPx mask */ -#define SMPR1_SMP_Set ((u32)0x00000007) -#define SMPR2_SMP_Set ((u32)0x00000007) - -/* ADC JDRx registers offset */ -#define JDR_Offset ((u8)0x28) - -/* ADC1 DR register base address */ -#define DR_ADDRESS ((u32)0x4001244C) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : ADC_DeInit -* Description : Deinitializes the ADCx peripheral registers to their default -* reset values. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_DeInit(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - switch (*(u32*)&ADCx) - { - case ADC1_BASE: - /* Enable ADC1 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); - /* Release ADC1 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); - break; - - case ADC2_BASE: - /* Enable ADC2 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE); - /* Release ADC2 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE); - break; - - case ADC3_BASE: - /* Enable ADC3 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE); - /* Release ADC3 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : ADC_Init -* Description : Initializes the ADCx peripheral according to the specified parameters -* in the ADC_InitStruct. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_InitStruct: pointer to an ADC_InitTypeDef structure that -* contains the configuration information for the specified -* ADC peripheral. -* Output : None -* Return : None -******************************************************************************/ -void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) -{ - u32 tmpreg1 = 0; - u8 tmpreg2 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode)); - assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); - assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); - assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); - assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); - assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel)); - - /*---------------------------- ADCx CR1 Configuration -----------------*/ - /* Get the ADCx CR1 value */ - tmpreg1 = ADCx->CR1; - /* Clear DUALMOD and SCAN bits */ - tmpreg1 &= CR1_CLEAR_Mask; - /* Configure ADCx: Dual mode and scan conversion mode */ - /* Set DUALMOD bits according to ADC_Mode value */ - /* Set SCAN bit according to ADC_ScanConvMode value */ - tmpreg1 |= (u32)(ADC_InitStruct->ADC_Mode | ((u32)ADC_InitStruct->ADC_ScanConvMode << 8)); - /* Write to ADCx CR1 */ - ADCx->CR1 = tmpreg1; - - /*---------------------------- ADCx CR2 Configuration -----------------*/ - /* Get the ADCx CR2 value */ - tmpreg1 = ADCx->CR2; - /* Clear CONT, ALIGN and EXTSEL bits */ - tmpreg1 &= CR2_CLEAR_Mask; - /* Configure ADCx: external trigger event and continuous conversion mode */ - /* Set ALIGN bit according to ADC_DataAlign value */ - /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ - /* Set CONT bit according to ADC_ContinuousConvMode value */ - tmpreg1 |= (u32)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | - ((u32)ADC_InitStruct->ADC_ContinuousConvMode << 1)); - /* Write to ADCx CR2 */ - ADCx->CR2 = tmpreg1; - - /*---------------------------- ADCx SQR1 Configuration -----------------*/ - /* Get the ADCx SQR1 value */ - tmpreg1 = ADCx->SQR1; - /* Clear L bits */ - tmpreg1 &= SQR1_CLEAR_Mask; - /* Configure ADCx: regular channel sequence length */ - /* Set L bits according to ADC_NbrOfChannel value */ - tmpreg2 |= (ADC_InitStruct->ADC_NbrOfChannel - 1); - tmpreg1 |= ((u32)tmpreg2 << 20); - /* Write to ADCx SQR1 */ - ADCx->SQR1 = tmpreg1; -} - -/******************************************************************************* -* Function Name : ADC_StructInit -* Description : Fills each ADC_InitStruct member with its default value. -* Input : ADC_InitStruct : pointer to an ADC_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) -{ - /* Reset ADC init structure parameters values */ - /* Initialize the ADC_Mode member */ - ADC_InitStruct->ADC_Mode = ADC_Mode_Independent; - - /* initialize the ADC_ScanConvMode member */ - ADC_InitStruct->ADC_ScanConvMode = DISABLE; - - /* Initialize the ADC_ContinuousConvMode member */ - ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; - - /* Initialize the ADC_ExternalTrigConv member */ - ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; - - /* Initialize the ADC_DataAlign member */ - ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; - - /* Initialize the ADC_NbrOfChannel member */ - ADC_InitStruct->ADC_NbrOfChannel = 1; -} - -/******************************************************************************* -* Function Name : ADC_Cmd -* Description : Enables or disables the specified ADC peripheral. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the ADCx peripheral. This parameter -* can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the ADON bit to wake up the ADC from power down mode */ - ADCx->CR2 |= CR2_ADON_Set; - } - else - { - /* Disable the selected ADC peripheral */ - ADCx->CR2 &= CR2_ADON_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_DMACmd -* Description : Enables or disables the specified ADC DMA request. -* Input : - ADCx: where x can be 1 or 3 to select the ADC peripheral. -* Note: ADC2 hasn't a DMA capability. -* - NewState: new state of the selected ADC DMA transfer. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_DMA_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC DMA request */ - ADCx->CR2 |= CR2_DMA_Set; - } - else - { - /* Disable the selected ADC DMA request */ - ADCx->CR2 &= CR2_DMA_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_ITConfig -* Description : Enables or disables the specified ADC interrupts. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_IT: specifies the ADC interrupt sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - ADC_IT_EOC: End of conversion interrupt mask -* - ADC_IT_AWD: Analog watchdog interrupt mask -* - ADC_IT_JEOC: End of injected conversion interrupt mask -* - NewState: new state of the specified ADC interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ITConfig(ADC_TypeDef* ADCx, u16 ADC_IT, FunctionalState NewState) -{ - u8 itmask = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_ADC_IT(ADC_IT)); - - /* Get the ADC IT index */ - itmask = (u8)ADC_IT; - - if (NewState != DISABLE) - { - /* Enable the selected ADC interrupts */ - ADCx->CR1 |= itmask; - } - else - { - /* Disable the selected ADC interrupts */ - ADCx->CR1 &= (~(u32)itmask); - } -} - -/******************************************************************************* -* Function Name : ADC_ResetCalibration -* Description : Resets the selected ADC calibration registers. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ResetCalibration(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Resets the selected ADC calibartion registers */ - ADCx->CR2 |= CR2_RSTCAL_Set; -} - -/******************************************************************************* -* Function Name : ADC_GetResetCalibrationStatus -* Description : Gets the selected ADC reset calibration registers status. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The new state of ADC reset calibration registers (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of RSTCAL bit */ - if ((ADCx->CR2 & CR2_RSTCAL_Set) != (u32)RESET) - { - /* RSTCAL bit is set */ - bitstatus = SET; - } - else - { - /* RSTCAL bit is reset */ - bitstatus = RESET; - } - - /* Return the RSTCAL bit status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_StartCalibration -* Description : Starts the selected ADC calibration process. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_StartCalibration(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Enable the selected ADC calibration process */ - ADCx->CR2 |= CR2_CAL_Set; -} - -/******************************************************************************* -* Function Name : ADC_GetCalibrationStatus -* Description : Gets the selected ADC calibration status. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The new state of ADC calibration (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of CAL bit */ - if ((ADCx->CR2 & CR2_CAL_Set) != (u32)RESET) - { - /* CAL bit is set: calibration on going */ - bitstatus = SET; - } - else - { - /* CAL bit is reset: end of calibration */ - bitstatus = RESET; - } - - /* Return the CAL bit status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_SoftwareStartConvCmd -* Description : Enables or disables the selected ADC software start conversion . -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC software start conversion. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC conversion on external event and start the selected - ADC conversion */ - ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set; - } - else - { - /* Disable the selected ADC conversion on external event and stop the selected - ADC conversion */ - ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_GetSoftwareStartConvStatus -* Description : Gets the selected ADC Software start conversion Status. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The new state of ADC software start conversion (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of SWSTART bit */ - if ((ADCx->CR2 & CR2_SWSTART_Set) != (u32)RESET) - { - /* SWSTART bit is set */ - bitstatus = SET; - } - else - { - /* SWSTART bit is reset */ - bitstatus = RESET; - } - - /* Return the SWSTART bit status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_DiscModeChannelCountConfig -* Description : Configures the discontinuous mode for the selected ADC regular -* group channel. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - Number: specifies the discontinuous mode regular channel -* count value. This number must be between 1 and 8. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, u8 Number) -{ - u32 tmpreg1 = 0; - u32 tmpreg2 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); - - /* Get the old register value */ - tmpreg1 = ADCx->CR1; - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= CR1_DISCNUM_Reset; - /* Set the discontinuous mode channel count */ - tmpreg2 = Number - 1; - tmpreg1 |= tmpreg2 << 13; - /* Store the new register value */ - ADCx->CR1 = tmpreg1; -} - -/******************************************************************************* -* Function Name : ADC_DiscModeCmd -* Description : Enables or disables the discontinuous mode on regular group -* channel for the specified ADC -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC discontinuous mode -* on regular group channel. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC regular discontinuous mode */ - ADCx->CR1 |= CR1_DISCEN_Set; - } - else - { - /* Disable the selected ADC regular discontinuous mode */ - ADCx->CR1 &= CR1_DISCEN_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_RegularChannelConfig -* Description : Configures for the selected ADC regular channel its corresponding -* rank in the sequencer and its sample time. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_Channel: the ADC channel to configure. -* This parameter can be one of the following values: -* - ADC_Channel_0: ADC Channel0 selected -* - ADC_Channel_1: ADC Channel1 selected -* - ADC_Channel_2: ADC Channel2 selected -* - ADC_Channel_3: ADC Channel3 selected -* - ADC_Channel_4: ADC Channel4 selected -* - ADC_Channel_5: ADC Channel5 selected -* - ADC_Channel_6: ADC Channel6 selected -* - ADC_Channel_7: ADC Channel7 selected -* - ADC_Channel_8: ADC Channel8 selected -* - ADC_Channel_9: ADC Channel9 selected -* - ADC_Channel_10: ADC Channel10 selected -* - ADC_Channel_11: ADC Channel11 selected -* - ADC_Channel_12: ADC Channel12 selected -* - ADC_Channel_13: ADC Channel13 selected -* - ADC_Channel_14: ADC Channel14 selected -* - ADC_Channel_15: ADC Channel15 selected -* - ADC_Channel_16: ADC Channel16 selected -* - ADC_Channel_17: ADC Channel17 selected -* - Rank: The rank in the regular group sequencer. This parameter -* must be between 1 to 16. -* - ADC_SampleTime: The sample time value to be set for the -* selected channel. -* This parameter can be one of the following values: -* - ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles -* - ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles -* - ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles -* - ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles -* - ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles -* - ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles -* - ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles -* - ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles -* Output : None -* Return : None -*******************************************************************************/ -void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime) -{ - u32 tmpreg1 = 0, tmpreg2 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - assert_param(IS_ADC_REGULAR_RANK(Rank)); - assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); - - /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ - if (ADC_Channel > ADC_Channel_9) - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR1; - /* Calculate the mask to clear */ - tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10)); - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_SampleTime << (3 * (ADC_Channel - 10)); - /* Set the discontinuous mode channel count */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR1 = tmpreg1; - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR2; - /* Calculate the mask to clear */ - tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_SampleTime << (3 * ADC_Channel); - /* Set the discontinuous mode channel count */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR2 = tmpreg1; - } - /* For Rank 1 to 6 */ - if (Rank < 7) - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR3; - /* Calculate the mask to clear */ - tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1)); - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_Channel << (5 * (Rank - 1)); - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SQR3 = tmpreg1; - } - /* For Rank 7 to 12 */ - else if (Rank < 13) - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR2; - /* Calculate the mask to clear */ - tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7)); - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_Channel << (5 * (Rank - 7)); - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SQR2 = tmpreg1; - } - /* For Rank 13 to 16 */ - else - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR1; - /* Calculate the mask to clear */ - tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13)); - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_Channel << (5 * (Rank - 13)); - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SQR1 = tmpreg1; - } -} - -/******************************************************************************* -* Function Name : ADC_ExternalTrigConvCmd -* Description : Enables or disables the ADCx conversion through external trigger. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC external trigger -* start of conversion. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC conversion on external event */ - ADCx->CR2 |= CR2_EXTTRIG_Set; - } - else - { - /* Disable the selected ADC conversion on external event */ - ADCx->CR2 &= CR2_EXTTRIG_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_GetConversionValue -* Description : Returns the last ADCx conversion result data for regular channel. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The Data conversion value. -*******************************************************************************/ -u16 ADC_GetConversionValue(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Return the selected ADC conversion value */ - return (u16) ADCx->DR; -} - -/******************************************************************************* -* Function Name : ADC_GetDualModeConversionValue -* Description : Returns the last ADC1 and ADC2 conversion result data in dual mode. -* Output : None -* Return : The Data conversion value. -*******************************************************************************/ -u32 ADC_GetDualModeConversionValue(void) -{ - /* Return the dual mode conversion value */ - return (*(vu32 *) DR_ADDRESS); -} - -/******************************************************************************* -* Function Name : ADC_AutoInjectedConvCmd -* Description : Enables or disables the selected ADC automatic injected group -* conversion after regular one. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC auto injected -* conversion -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC automatic injected group conversion */ - ADCx->CR1 |= CR1_JAUTO_Set; - } - else - { - /* Disable the selected ADC automatic injected group conversion */ - ADCx->CR1 &= CR1_JAUTO_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_InjectedDiscModeCmd -* Description : Enables or disables the discontinuous mode for injected group -* channel for the specified ADC -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC discontinuous mode -* on injected group channel. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC injected discontinuous mode */ - ADCx->CR1 |= CR1_JDISCEN_Set; - } - else - { - /* Disable the selected ADC injected discontinuous mode */ - ADCx->CR1 &= CR1_JDISCEN_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_ExternalTrigInjectedConvConfig -* Description : Configures the ADCx external trigger for injected channels conversion. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_ExternalTrigInjecConv: specifies the ADC trigger to -* start injected conversion. -* This parameter can be one of the following values: -* - ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event -* selected (for ADC1, ADC2 and ADC3) -* - ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture -* compare4 selected (for ADC1, ADC2 and ADC3) -* - ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event -* selected (for ADC1 and ADC2) -* - ADC_External TrigInjecConv_T2_CC1: Timer2 capture -* compare1 selected (for ADC1 and ADC2) -* - ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture -* compare4 selected (for ADC1 and ADC2) -* - ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event -* selected (for ADC1 and ADC2) -* - ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External -* interrupt line 15 or Timer8 capture compare4 event selected -* (for ADC1 and ADC2) -* - ADC_External TrigInjecConv_T4_CC3: Timer4 capture -* compare3 selected (for ADC3 only) -* - ADC_External TrigInjecConv_T8_CC2: Timer8 capture -* compare2 selected (for ADC3 only) -* - ADC_External TrigInjecConv_T8_CC4: Timer8 capture -* compare4 selected (for ADC3 only) -* - ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event -* selected (for ADC3 only) -* - ADC_External TrigInjecConv_T5_CC4: Timer5 capture -* compare4 selected (for ADC3 only) -* - ADC_ExternalTrigInjecConv_None: Injected conversion -* started by software and not by external trigger (for -* ADC1, ADC2 and ADC3) -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, u32 ADC_ExternalTrigInjecConv) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); - - /* Get the old register value */ - tmpreg = ADCx->CR2; - /* Clear the old external event selection for injected group */ - tmpreg &= CR2_JEXTSEL_Reset; - /* Set the external event selection for injected group */ - tmpreg |= ADC_ExternalTrigInjecConv; - /* Store the new register value */ - ADCx->CR2 = tmpreg; -} - -/******************************************************************************* -* Function Name : ADC_ExternalTrigInjectedConvCmd -* Description : Enables or disables the ADCx injected channels conversion -* through external trigger -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC external trigger -* start of injected conversion. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC external event selection for injected group */ - ADCx->CR2 |= CR2_JEXTTRIG_Set; - } - else - { - /* Disable the selected ADC external event selection for injected group */ - ADCx->CR2 &= CR2_JEXTTRIG_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_SoftwareStartInjectedConvCmd -* Description : Enables or disables the selected ADC start of the injected -* channels conversion. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC software start -* injected conversion. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC conversion for injected group on external event and start the selected - ADC injected conversion */ - ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set; - } - else - { - /* Disable the selected ADC conversion on external event for injected group and stop the selected - ADC injected conversion */ - ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_GetSoftwareStartInjectedConvCmdStatus -* Description : Gets the selected ADC Software start injected conversion Status. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The new state of ADC software start injected conversion (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of JSWSTART bit */ - if ((ADCx->CR2 & CR2_JSWSTART_Set) != (u32)RESET) - { - /* JSWSTART bit is set */ - bitstatus = SET; - } - else - { - /* JSWSTART bit is reset */ - bitstatus = RESET; - } - - /* Return the JSWSTART bit status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_InjectedChannelConfig -* Description : Configures for the selected ADC injected channel its corresponding -* rank in the sequencer and its sample time. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_Channel: the ADC channel to configure. -* This parameter can be one of the following values: -* - ADC_Channel_0: ADC Channel0 selected -* - ADC_Channel_1: ADC Channel1 selected -* - ADC_Channel_2: ADC Channel2 selected -* - ADC_Channel_3: ADC Channel3 selected -* - ADC_Channel_4: ADC Channel4 selected -* - ADC_Channel_5: ADC Channel5 selected -* - ADC_Channel_6: ADC Channel6 selected -* - ADC_Channel_7: ADC Channel7 selected -* - ADC_Channel_8: ADC Channel8 selected -* - ADC_Channel_9: ADC Channel9 selected -* - ADC_Channel_10: ADC Channel10 selected -* - ADC_Channel_11: ADC Channel11 selected -* - ADC_Channel_12: ADC Channel12 selected -* - ADC_Channel_13: ADC Channel13 selected -* - ADC_Channel_14: ADC Channel14 selected -* - ADC_Channel_15: ADC Channel15 selected -* - ADC_Channel_16: ADC Channel16 selected -* - ADC_Channel_17: ADC Channel17 selected -* - Rank: The rank in the injected group sequencer. This parameter -* must be between 1 to 4. -* - ADC_SampleTime: The sample time value to be set for the -* selected channel. -* This parameter can be one of the following values: -* - ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles -* - ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles -* - ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles -* - ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles -* - ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles -* - ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles -* - ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles -* - ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles -* Output : None -* Return : None -*******************************************************************************/ -void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime) -{ - u32 tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - assert_param(IS_ADC_INJECTED_RANK(Rank)); - assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); - - /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ - if (ADC_Channel > ADC_Channel_9) - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR1; - /* Calculate the mask to clear */ - tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10)); - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_SampleTime << (3*(ADC_Channel - 10)); - /* Set the discontinuous mode channel count */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR1 = tmpreg1; - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR2; - /* Calculate the mask to clear */ - tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_SampleTime << (3 * ADC_Channel); - /* Set the discontinuous mode channel count */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR2 = tmpreg1; - } - - /* Rank configuration */ - /* Get the old register value */ - tmpreg1 = ADCx->JSQR; - /* Get JL value: Number = JL+1 */ - tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20; - /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ - tmpreg2 = JSQR_JSQ_Set << (5 * (u8)((Rank + 3) - (tmpreg3 + 1))); - /* Clear the old JSQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ - tmpreg2 = (u32)ADC_Channel << (5 * (u8)((Rank + 3) - (tmpreg3 + 1))); - /* Set the JSQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->JSQR = tmpreg1; -} - -/******************************************************************************* -* Function Name : ADC_InjectedSequencerLengthConfig -* Description : Configures the sequencer length for injected channels -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - Length: The sequencer length. -* This parameter must be a number between 1 to 4. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, u8 Length) -{ - u32 tmpreg1 = 0; - u32 tmpreg2 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_LENGTH(Length)); - - /* Get the old register value */ - tmpreg1 = ADCx->JSQR; - /* Clear the old injected sequnence lenght JL bits */ - tmpreg1 &= JSQR_JL_Reset; - /* Set the injected sequnence lenght JL bits */ - tmpreg2 = Length - 1; - tmpreg1 |= tmpreg2 << 20; - /* Store the new register value */ - ADCx->JSQR = tmpreg1; -} - -/******************************************************************************* -* Function Name : ADC_SetInjectedOffset -* Description : Set the injected channels conversion value offset -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_InjectedChannel: the ADC injected channel to set its -* offset. -* This parameter can be one of the following values: -* - ADC_InjectedChannel_1: Injected Channel1 selected -* - ADC_InjectedChannel_2: Injected Channel2 selected -* - ADC_InjectedChannel_3: Injected Channel3 selected -* - ADC_InjectedChannel_4: Injected Channel4 selected -* - Offset: the offset value for the selected ADC injected channel -* This parameter must be a 12bit value. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel, u16 Offset) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); - assert_param(IS_ADC_OFFSET(Offset)); - - /* Set the selected injected channel data offset */ - *((vu32 *)((*(u32*)&ADCx) + ADC_InjectedChannel)) = (u32)Offset; -} - -/******************************************************************************* -* Function Name : ADC_GetInjectedConversionValue -* Description : Returns the ADC injected channel conversion result -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_InjectedChannel: the converted ADC injected channel. -* This parameter can be one of the following values: -* - ADC_InjectedChannel_1: Injected Channel1 selected -* - ADC_InjectedChannel_2: Injected Channel2 selected -* - ADC_InjectedChannel_3: Injected Channel3 selected -* - ADC_InjectedChannel_4: Injected Channel4 selected -* Output : None -* Return : The Data conversion value. -*******************************************************************************/ -u16 ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); - - /* Returns the selected injected channel conversion data value */ - return (u16) (*(vu32*) (((*(u32*)&ADCx) + ADC_InjectedChannel + JDR_Offset))); -} - -/******************************************************************************* -* Function Name : ADC_AnalogWatchdogCmd -* Description : Enables or disables the analog watchdog on single/all regular -* or injected channels -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_AnalogWatchdog: the ADC analog watchdog configuration. -* This parameter can be one of the following values: -* - ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on -* a single regular channel -* - ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on -* a single injected channel -* - ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog -* watchdog on a single regular or injected channel -* - ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on -* all regular channel -* - ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on -* all injected channel -* - ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog -* on all regular and injected channels -* - ADC_AnalogWatchdog_None: No channel guarded by the -* analog watchdog -* Output : None -* Return : None -*******************************************************************************/ -void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, u32 ADC_AnalogWatchdog) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); - - /* Get the old register value */ - tmpreg = ADCx->CR1; - /* Clear AWDEN, AWDENJ and AWDSGL bits */ - tmpreg &= CR1_AWDMode_Reset; - /* Set the analog watchdog enable mode */ - tmpreg |= ADC_AnalogWatchdog; - /* Store the new register value */ - ADCx->CR1 = tmpreg; -} - -/******************************************************************************* -* Function Name : ADC_AnalogWatchdogThresholdsConfig -* Description : Configures the high and low thresholds of the analog watchdog. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - HighThreshold: the ADC analog watchdog High threshold value. -* This parameter must be a 12bit value. -* - LowThreshold: the ADC analog watchdog Low threshold value. -* This parameter must be a 12bit value. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, u16 HighThreshold, - u16 LowThreshold) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_THRESHOLD(HighThreshold)); - assert_param(IS_ADC_THRESHOLD(LowThreshold)); - - /* Set the ADCx high threshold */ - ADCx->HTR = HighThreshold; - /* Set the ADCx low threshold */ - ADCx->LTR = LowThreshold; -} - -/******************************************************************************* -* Function Name : ADC_AnalogWatchdogSingleChannelConfig -* Description : Configures the analog watchdog guarded single channel -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_Channel: the ADC channel to configure for the analog -* watchdog. -* This parameter can be one of the following values: -* - ADC_Channel_0: ADC Channel0 selected -* - ADC_Channel_1: ADC Channel1 selected -* - ADC_Channel_2: ADC Channel2 selected -* - ADC_Channel_3: ADC Channel3 selected -* - ADC_Channel_4: ADC Channel4 selected -* - ADC_Channel_5: ADC Channel5 selected -* - ADC_Channel_6: ADC Channel6 selected -* - ADC_Channel_7: ADC Channel7 selected -* - ADC_Channel_8: ADC Channel8 selected -* - ADC_Channel_9: ADC Channel9 selected -* - ADC_Channel_10: ADC Channel10 selected -* - ADC_Channel_11: ADC Channel11 selected -* - ADC_Channel_12: ADC Channel12 selected -* - ADC_Channel_13: ADC Channel13 selected -* - ADC_Channel_14: ADC Channel14 selected -* - ADC_Channel_15: ADC Channel15 selected -* - ADC_Channel_16: ADC Channel16 selected -* - ADC_Channel_17: ADC Channel17 selected -* Output : None -* Return : None -*******************************************************************************/ -void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - - /* Get the old register value */ - tmpreg = ADCx->CR1; - /* Clear the Analog watchdog channel select bits */ - tmpreg &= CR1_AWDCH_Reset; - /* Set the Analog watchdog channel */ - tmpreg |= ADC_Channel; - /* Store the new register value */ - ADCx->CR1 = tmpreg; -} - -/******************************************************************************* -* Function Name : ADC_TempSensorVrefintCmd -* Description : Enables or disables the temperature sensor and Vrefint channel. -* Input : - NewState: new state of the temperature sensor. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_TempSensorVrefintCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the temperature sensor and Vrefint channel*/ - ADC1->CR2 |= CR2_TSVREFE_Set; - } - else - { - /* Disable the temperature sensor and Vrefint channel*/ - ADC1->CR2 &= CR2_TSVREFE_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_GetFlagStatus -* Description : Checks whether the specified ADC flag is set or not. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - ADC_FLAG_AWD: Analog watchdog flag -* - ADC_FLAG_EOC: End of conversion flag -* - ADC_FLAG_JEOC: End of injected group conversion flag -* - ADC_FLAG_JSTRT: Start of injected group conversion flag -* - ADC_FLAG_STRT: Start of regular group conversion flag -* Output : None -* Return : The new state of ADC_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, u8 ADC_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); - - /* Check the status of the specified ADC flag */ - if ((ADCx->SR & ADC_FLAG) != (u8)RESET) - { - /* ADC_FLAG is set */ - bitstatus = SET; - } - else - { - /* ADC_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the ADC_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_ClearFlag -* Description : Clears the ADCx's pending flags. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_FLAG: specifies the flag to clear. -* This parameter can be any combination of the following values: -* - ADC_FLAG_AWD: Analog watchdog flag -* - ADC_FLAG_EOC: End of conversion flag -* - ADC_FLAG_JEOC: End of injected group conversion flag -* - ADC_FLAG_JSTRT: Start of injected group conversion flag -* - ADC_FLAG_STRT: Start of regular group conversion flag -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ClearFlag(ADC_TypeDef* ADCx, u8 ADC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); - - /* Clear the selected ADC flags */ - ADCx->SR = ~(u32)ADC_FLAG; -} - -/******************************************************************************* -* Function Name : ADC_GetITStatus -* Description : Checks whether the specified ADC interrupt has occurred or not. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_IT: specifies the ADC interrupt source to check. -* This parameter can be one of the following values: -* - ADC_IT_EOC: End of conversion interrupt mask -* - ADC_IT_AWD: Analog watchdog interrupt mask -* - ADC_IT_JEOC: End of injected conversion interrupt mask -* Output : None -* Return : The new state of ADC_IT (SET or RESET). -*******************************************************************************/ -ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, u16 ADC_IT) -{ - ITStatus bitstatus = RESET; - u32 itmask = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_GET_IT(ADC_IT)); - - /* Get the ADC IT index */ - itmask = ADC_IT >> 8; - - /* Get the ADC_IT enable bit status */ - enablestatus = (ADCx->CR1 & (u8)ADC_IT) ; - - /* Check the status of the specified ADC interrupt */ - if (((ADCx->SR & itmask) != (u32)RESET) && enablestatus) - { - /* ADC_IT is set */ - bitstatus = SET; - } - else - { - /* ADC_IT is reset */ - bitstatus = RESET; - } - - /* Return the ADC_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_ClearITPendingBit -* Description : Clears the ADCx’s interrupt pending bits. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_IT: specifies the ADC interrupt pending bit to clear. -* This parameter can be any combination of the following values: -* - ADC_IT_EOC: End of conversion interrupt mask -* - ADC_IT_AWD: Analog watchdog interrupt mask -* - ADC_IT_JEOC: End of injected conversion interrupt mask -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, u16 ADC_IT) -{ - u8 itmask = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_IT(ADC_IT)); - - /* Get the ADC IT index */ - itmask = (u8)(ADC_IT >> 8); - - /* Clear the selected ADC interrupt pending bits */ - ADCx->SR = ~(u32)itmask; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_bkp.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_bkp.c deleted file mode 100755 index bc8755b..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_bkp.c +++ /dev/null @@ -1,272 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_bkp.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the BKP firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_bkp.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ------------ BKP registers bit address in the alias region ----------- */ -#define BKP_OFFSET (BKP_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ -/* Alias word address of TPAL bit */ -#define CR_OFFSET (BKP_OFFSET + 0x30) -#define TPAL_BitNumber 0x01 -#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4)) - -/* Alias word address of TPE bit */ -#define TPE_BitNumber 0x00 -#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4)) - -/* --- CSR Register ---*/ -/* Alias word address of TPIE bit */ -#define CSR_OFFSET (BKP_OFFSET + 0x34) -#define TPIE_BitNumber 0x02 -#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4)) - -/* Alias word address of TIF bit */ -#define TIF_BitNumber 0x09 -#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4)) - -/* Alias word address of TEF bit */ -#define TEF_BitNumber 0x08 -#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4)) - - -/* ---------------------- BKP registers bit mask ------------------------ */ -/* RTCCR register bit mask */ -#define RTCCR_CAL_Mask ((u16)0xFF80) -#define RTCCR_Mask ((u16)0xFC7F) - -/* CSR register bit mask */ -#define CSR_CTE_Set ((u16)0x0001) -#define CSR_CTI_Set ((u16)0x0002) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : BKP_DeInit -* Description : Deinitializes the BKP peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BKP_DeInit(void) -{ - RCC_BackupResetCmd(ENABLE); - RCC_BackupResetCmd(DISABLE); -} - -/******************************************************************************* -* Function Name : BKP_TamperPinLevelConfig -* Description : Configures the Tamper Pin active level. -* Input : - BKP_TamperPinLevel: specifies the Tamper Pin active level. -* This parameter can be one of the following values: -* - BKP_TamperPinLevel_High: Tamper pin active on high level -* - BKP_TamperPinLevel_Low: Tamper pin active on low level -* Output : None -* Return : None -*******************************************************************************/ -void BKP_TamperPinLevelConfig(u16 BKP_TamperPinLevel) -{ - /* Check the parameters */ - assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel)); - - *(vu32 *) CR_TPAL_BB = BKP_TamperPinLevel; -} - -/******************************************************************************* -* Function Name : BKP_TamperPinCmd -* Description : Enables or disables the Tamper Pin activation. -* Input : - NewState: new state of the Tamper Pin activation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void BKP_TamperPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_TPE_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : BKP_ITConfig -* Description : Enables or disables the Tamper Pin Interrupt. -* Input : - NewState: new state of the Tamper Pin Interrupt. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void BKP_ITConfig(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CSR_TPIE_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : BKP_RTCOutputConfig -* Description : Select the RTC output source to output on the Tamper pin. -* Input : - BKP_RTCOutputSource: specifies the RTC output source. -* This parameter can be one of the following values: -* - BKP_RTCOutputSource_None: no RTC output on the Tamper pin. -* - BKP_RTCOutputSource_CalibClock: output the RTC clock -* with frequency divided by 64 on the Tamper pin. -* - BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse -* signal on the Tamper pin. -* - BKP_RTCOutputSource_Second: output the RTC Second pulse -* signal on the Tamper pin. -* Output : None -* Return : None -*******************************************************************************/ -void BKP_RTCOutputConfig(u16 BKP_RTCOutputSource) -{ - u16 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource)); - - tmpreg = BKP->RTCCR; - - /* Clear CCO, ASOE and ASOS bits */ - tmpreg &= RTCCR_Mask; - - /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */ - tmpreg |= BKP_RTCOutputSource; - - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/******************************************************************************* -* Function Name : BKP_SetRTCCalibrationValue -* Description : Sets RTC Clock Calibration value. -* Input : - CalibrationValue: specifies the RTC Clock Calibration value. -* This parameter must be a number between 0 and 0x7F. -* Output : None -* Return : None -*******************************************************************************/ -void BKP_SetRTCCalibrationValue(u8 CalibrationValue) -{ - u16 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue)); - - tmpreg = BKP->RTCCR; - - /* Clear CAL[6:0] bits */ - tmpreg &= RTCCR_CAL_Mask; - - /* Set CAL[6:0] bits according to CalibrationValue value */ - tmpreg |= CalibrationValue; - - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/******************************************************************************* -* Function Name : BKP_WriteBackupRegister -* Description : Writes user data to the specified Data Backup Register. -* Input : - BKP_DR: specifies the Data Backup Register. -* This parameter can be BKP_DRx where x:[1, 42] -* - Data: data to write -* Output : None -* Return : None -*******************************************************************************/ -void BKP_WriteBackupRegister(u16 BKP_DR, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - *(vu16 *) (BKP_BASE + BKP_DR) = Data; -} - -/******************************************************************************* -* Function Name : BKP_ReadBackupRegister -* Description : Reads data from the specified Data Backup Register. -* Input : - BKP_DR: specifies the Data Backup Register. -* This parameter can be BKP_DRx where x:[1, 42] -* Output : None -* Return : The content of the specified Data Backup Register -*******************************************************************************/ -u16 BKP_ReadBackupRegister(u16 BKP_DR) -{ - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - return (*(vu16 *) (BKP_BASE + BKP_DR)); -} - -/******************************************************************************* -* Function Name : BKP_GetFlagStatus -* Description : Checks whether the Tamper Pin Event flag is set or not. -* Input : None -* Output : None -* Return : The new state of the Tamper Pin Event flag (SET or RESET). -*******************************************************************************/ -FlagStatus BKP_GetFlagStatus(void) -{ - return (FlagStatus)(*(vu32 *) CSR_TEF_BB); -} - -/******************************************************************************* -* Function Name : BKP_ClearFlag -* Description : Clears Tamper Pin Event pending flag. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BKP_ClearFlag(void) -{ - /* Set CTE bit to clear Tamper Pin Event flag */ - BKP->CSR |= CSR_CTE_Set; -} - -/******************************************************************************* -* Function Name : BKP_GetITStatus -* Description : Checks whether the Tamper Pin Interrupt has occurred or not. -* Input : None -* Output : None -* Return : The new state of the Tamper Pin Interrupt (SET or RESET). -*******************************************************************************/ -ITStatus BKP_GetITStatus(void) -{ - return (ITStatus)(*(vu32 *) CSR_TIF_BB); -} - -/******************************************************************************* -* Function Name : BKP_ClearITPendingBit -* Description : Clears Tamper Pin Interrupt pending bit. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BKP_ClearITPendingBit(void) -{ - /* Set CTI bit to clear Tamper Pin Interrupt pending bit */ - BKP->CSR |= CSR_CTI_Set; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_can.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_can.c deleted file mode 100755 index a510e8a..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_can.c +++ /dev/null @@ -1,907 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_can.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the CAN firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_can.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ - -/* Private define ------------------------------------------------------------*/ -/* CAN Master Control Register bits */ -#define CAN_MCR_INRQ ((u32)0x00000001) /* Initialization request */ -#define CAN_MCR_SLEEP ((u32)0x00000002) /* Sleep mode request */ -#define CAN_MCR_TXFP ((u32)0x00000004) /* Transmit FIFO priority */ -#define CAN_MCR_RFLM ((u32)0x00000008) /* Receive FIFO locked mode */ -#define CAN_MCR_NART ((u32)0x00000010) /* No automatic retransmission */ -#define CAN_MCR_AWUM ((u32)0x00000020) /* Automatic wake up mode */ -#define CAN_MCR_ABOM ((u32)0x00000040) /* Automatic bus-off management */ -#define CAN_MCR_TTCM ((u32)0x00000080) /* time triggered communication */ - -/* CAN Master Status Register bits */ -#define CAN_MSR_INAK ((u32)0x00000001) /* Initialization acknowledge */ -#define CAN_MSR_WKUI ((u32)0x00000008) /* Wake-up interrupt */ -#define CAN_MSR_SLAKI ((u32)0x00000010) /* Sleep acknowledge interrupt */ - -/* CAN Transmit Status Register bits */ -#define CAN_TSR_RQCP0 ((u32)0x00000001) /* Request completed mailbox0 */ -#define CAN_TSR_TXOK0 ((u32)0x00000002) /* Transmission OK of mailbox0 */ -#define CAN_TSR_ABRQ0 ((u32)0x00000080) /* Abort request for mailbox0 */ -#define CAN_TSR_RQCP1 ((u32)0x00000100) /* Request completed mailbox1 */ -#define CAN_TSR_TXOK1 ((u32)0x00000200) /* Transmission OK of mailbox1 */ -#define CAN_TSR_ABRQ1 ((u32)0x00008000) /* Abort request for mailbox1 */ -#define CAN_TSR_RQCP2 ((u32)0x00010000) /* Request completed mailbox2 */ -#define CAN_TSR_TXOK2 ((u32)0x00020000) /* Transmission OK of mailbox2 */ -#define CAN_TSR_ABRQ2 ((u32)0x00800000) /* Abort request for mailbox2 */ -#define CAN_TSR_TME0 ((u32)0x04000000) /* Transmit mailbox 0 empty */ -#define CAN_TSR_TME1 ((u32)0x08000000) /* Transmit mailbox 1 empty */ -#define CAN_TSR_TME2 ((u32)0x10000000) /* Transmit mailbox 2 empty */ - -/* CAN Receive FIFO 0 Register bits */ -#define CAN_RF0R_FULL0 ((u32)0x00000008) /* FIFO 0 full */ -#define CAN_RF0R_FOVR0 ((u32)0x00000010) /* FIFO 0 overrun */ -#define CAN_RF0R_RFOM0 ((u32)0x00000020) /* Release FIFO 0 output mailbox */ - -/* CAN Receive FIFO 1 Register bits */ -#define CAN_RF1R_FULL1 ((u32)0x00000008) /* FIFO 1 full */ -#define CAN_RF1R_FOVR1 ((u32)0x00000010) /* FIFO 1 overrun */ -#define CAN_RF1R_RFOM1 ((u32)0x00000020) /* Release FIFO 1 output mailbox */ - -/* CAN Error Status Register bits */ -#define CAN_ESR_EWGF ((u32)0x00000001) /* Error warning flag */ -#define CAN_ESR_EPVF ((u32)0x00000002) /* Error passive flag */ -#define CAN_ESR_BOFF ((u32)0x00000004) /* Bus-off flag */ - -/* CAN Mailbox Transmit Request */ -#define CAN_TMIDxR_TXRQ ((u32)0x00000001) /* Transmit mailbox request */ - -/* CAN Filter Master Register bits */ -#define CAN_FMR_FINIT ((u32)0x00000001) /* Filter init mode */ - - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static ITStatus CheckITStatus(u32 CAN_Reg, u32 It_Bit); - -/* Private functions ---------------------------------------------------------*/ -/******************************************************************************* -* Function Name : CAN_DeInit -* Description : Deinitializes the CAN peripheral registers to their default -* reset values. -* Input : None. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_DeInit(void) -{ - /* Enable CAN reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN, ENABLE); - /* Release CAN from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN, DISABLE); -} - -/******************************************************************************* -* Function Name : CAN_Init -* Description : Initializes the CAN peripheral according to the specified -* parameters in the CAN_InitStruct. -* Input : CAN_InitStruct: pointer to a CAN_InitTypeDef structure that - contains the configuration information for the CAN peripheral. -* Output : None. -* Return : Constant indicates initialization succeed which will be -* CANINITFAILED or CANINITOK. -*******************************************************************************/ -u8 CAN_Init(CAN_InitTypeDef* CAN_InitStruct) -{ - u8 InitStatus = 0; - u16 WaitAck; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP)); - assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode)); - assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW)); - assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1)); - assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2)); - assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler)); - - /* Request initialisation */ - CAN->MCR = CAN_MCR_INRQ; - - /* ...and check acknowledged */ - if ((CAN->MSR & CAN_MSR_INAK) == 0) - { - InitStatus = CANINITFAILED; - } - else - { - /* Set the time triggered communication mode */ - if (CAN_InitStruct->CAN_TTCM == ENABLE) - { - CAN->MCR |= CAN_MCR_TTCM; - } - else - { - CAN->MCR &= ~CAN_MCR_TTCM; - } - - /* Set the automatic bus-off management */ - if (CAN_InitStruct->CAN_ABOM == ENABLE) - { - CAN->MCR |= CAN_MCR_ABOM; - } - else - { - CAN->MCR &= ~CAN_MCR_ABOM; - } - - /* Set the automatic wake-up mode */ - if (CAN_InitStruct->CAN_AWUM == ENABLE) - { - CAN->MCR |= CAN_MCR_AWUM; - } - else - { - CAN->MCR &= ~CAN_MCR_AWUM; - } - - /* Set the no automatic retransmission */ - if (CAN_InitStruct->CAN_NART == ENABLE) - { - CAN->MCR |= CAN_MCR_NART; - } - else - { - CAN->MCR &= ~CAN_MCR_NART; - } - - /* Set the receive FIFO locked mode */ - if (CAN_InitStruct->CAN_RFLM == ENABLE) - { - CAN->MCR |= CAN_MCR_RFLM; - } - else - { - CAN->MCR &= ~CAN_MCR_RFLM; - } - - /* Set the transmit FIFO priority */ - if (CAN_InitStruct->CAN_TXFP == ENABLE) - { - CAN->MCR |= CAN_MCR_TXFP; - } - else - { - CAN->MCR &= ~CAN_MCR_TXFP; - } - - /* Set the bit timing register */ - CAN->BTR = (u32)((u32)CAN_InitStruct->CAN_Mode << 30) | ((u32)CAN_InitStruct->CAN_SJW << 24) | - ((u32)CAN_InitStruct->CAN_BS1 << 16) | ((u32)CAN_InitStruct->CAN_BS2 << 20) | - ((u32)CAN_InitStruct->CAN_Prescaler - 1); - - InitStatus = CANINITOK; - - /* Request leave initialisation */ - CAN->MCR &= ~CAN_MCR_INRQ; - - /* Wait the acknowledge */ - for(WaitAck = 0x400; WaitAck > 0x0; WaitAck--) - { - } - - /* ...and check acknowledged */ - if ((CAN->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) - { - InitStatus = CANINITFAILED; - } - } - - /* At this step, return the status of initialization */ - return InitStatus; -} - -/******************************************************************************* -* Function Name : CAN_FilterInit -* Description : Initializes the CAN peripheral according to the specified -* parameters in the CAN_FilterInitStruct. -* Input : CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef -* structure that contains the configuration information. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) -{ - u16 FilterNumber_BitPos = 0; - - /* Check the parameters */ - assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber)); - assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode)); - assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale)); - assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment)); - assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation)); - - FilterNumber_BitPos = - (u16)((u16)0x0001 << ((u16)CAN_FilterInitStruct->CAN_FilterNumber)); - - /* Initialisation mode for the filter */ - CAN->FMR |= CAN_FMR_FINIT; - - /* Filter Deactivation */ - CAN->FA1R &= ~(u32)FilterNumber_BitPos; - - /* Filter Scale */ - if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) - { - /* 16-bit scale for the filter */ - CAN->FS1R &= ~(u32)FilterNumber_BitPos; - - /* First 16-bit identifier and First 16-bit mask */ - /* Or First 16-bit identifier and Second 16-bit identifier */ - CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = - ((u32)((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | - ((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterIdLow); - - /* Second 16-bit identifier and Second 16-bit mask */ - /* Or Third 16-bit identifier and Fourth 16-bit identifier */ - CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = - ((u32)((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | - ((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterIdHigh); - } - if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) - { - /* 32-bit scale for the filter */ - CAN->FS1R |= FilterNumber_BitPos; - - /* 32-bit identifier or First 32-bit identifier */ - CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = - ((u32)((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | - ((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterIdLow); - - /* 32-bit mask or Second 32-bit identifier */ - CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = - ((u32)((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | - ((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterMaskIdLow); - - } - - /* Filter Mode */ - if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) - { - /*Id/Mask mode for the filter*/ - CAN->FM1R &= ~(u32)FilterNumber_BitPos; - } - else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ - { - /*Identifier list mode for the filter*/ - CAN->FM1R |= (u32)FilterNumber_BitPos; - } - - /* Filter FIFO assignment */ - if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_FilterFIFO0) - { - /* FIFO 0 assignation for the filter */ - CAN->FFA1R &= ~(u32)FilterNumber_BitPos; - } - if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_FilterFIFO1) - { - /* FIFO 1 assignation for the filter */ - CAN->FFA1R |= (u32)FilterNumber_BitPos; - } - - /* Filter activation */ - if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) - { - CAN->FA1R |= FilterNumber_BitPos; - } - - /* Leave the initialisation mode for the filter */ - CAN->FMR &= ~CAN_FMR_FINIT; -} - -/******************************************************************************* -* Function Name : CAN_StructInit -* Description : Fills each CAN_InitStruct member with its default value. -* Input : CAN_InitStruct: pointer to a CAN_InitTypeDef structure which -* will be initialized. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) -{ - /* Reset CAN init structure parameters values */ - - /* Initialize the time triggered communication mode */ - CAN_InitStruct->CAN_TTCM = DISABLE; - - /* Initialize the automatic bus-off management */ - CAN_InitStruct->CAN_ABOM = DISABLE; - - /* Initialize the automatic wake-up mode */ - CAN_InitStruct->CAN_AWUM = DISABLE; - - /* Initialize the no automatic retransmission */ - CAN_InitStruct->CAN_NART = DISABLE; - - /* Initialize the receive FIFO locked mode */ - CAN_InitStruct->CAN_RFLM = DISABLE; - - /* Initialize the transmit FIFO priority */ - CAN_InitStruct->CAN_TXFP = DISABLE; - - /* Initialize the CAN_Mode member */ - CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; - - /* Initialize the CAN_SJW member */ - CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; - - /* Initialize the CAN_BS1 member */ - CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; - - /* Initialize the CAN_BS2 member */ - CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; - - /* Initialize the CAN_Prescaler member */ - CAN_InitStruct->CAN_Prescaler = 1; -} - -/******************************************************************************* -* Function Name : CAN_ITConfig -* Description : Enables or disables the specified CAN interrupts. -* Input : - CAN_IT: specifies the CAN interrupt sources to be enabled or -* disabled. -* This parameter can be: CAN_IT_TME, CAN_IT_FMP0, CAN_IT_FF0, -* CAN_IT_FOV0, CAN_IT_FMP1, CAN_IT_FF1, -* CAN_IT_FOV1, CAN_IT_EWG, CAN_IT_EPV, -* CAN_IT_LEC, CAN_IT_ERR, CAN_IT_WKU or -* CAN_IT_SLK. -* - NewState: new state of the CAN interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_ITConfig(u32 CAN_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_CAN_ITConfig(CAN_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected CAN interrupt */ - CAN->IER |= CAN_IT; - } - else - { - /* Disable the selected CAN interrupt */ - CAN->IER &= ~CAN_IT; - } -} - -/******************************************************************************* -* Function Name : CAN_Transmit -* Description : Initiates the transmission of a message. -* Input : TxMessage: pointer to a structure which contains CAN Id, CAN -* DLC and CAN datas. -* Output : None. -* Return : The number of the mailbox that is used for transmission -* or CAN_NO_MB if there is no empty mailbox. -*******************************************************************************/ -u8 CAN_Transmit(CanTxMsg* TxMessage) -{ - u8 TransmitMailbox = 0; - - /* Check the parameters */ - assert_param(IS_CAN_STDID(TxMessage->StdId)); - assert_param(IS_CAN_EXTID(TxMessage->StdId)); - assert_param(IS_CAN_IDTYPE(TxMessage->IDE)); - assert_param(IS_CAN_RTR(TxMessage->RTR)); - assert_param(IS_CAN_DLC(TxMessage->DLC)); - - /* Select one empty transmit mailbox */ - if ((CAN->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) - { - TransmitMailbox = 0; - } - else if ((CAN->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) - { - TransmitMailbox = 1; - } - else if ((CAN->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) - { - TransmitMailbox = 2; - } - else - { - TransmitMailbox = CAN_NO_MB; - } - - if (TransmitMailbox != CAN_NO_MB) - { - /* Set up the Id */ - CAN->sTxMailBox[TransmitMailbox].TIR &= CAN_TMIDxR_TXRQ; - if (TxMessage->IDE == CAN_ID_STD) - { - TxMessage->StdId &= (u32)0x000007FF; - TxMessage->StdId = TxMessage->StdId << 21; - - CAN->sTxMailBox[TransmitMailbox].TIR |= (TxMessage->StdId | TxMessage->IDE | - TxMessage->RTR); - } - else - { - TxMessage->ExtId &= (u32)0x1FFFFFFF; - TxMessage->ExtId <<= 3; - - CAN->sTxMailBox[TransmitMailbox].TIR |= (TxMessage->ExtId | TxMessage->IDE | - TxMessage->RTR); - } - - /* Set up the DLC */ - TxMessage->DLC &= (u8)0x0000000F; - CAN->sTxMailBox[TransmitMailbox].TDTR &= (u32)0xFFFFFFF0; - CAN->sTxMailBox[TransmitMailbox].TDTR |= TxMessage->DLC; - - /* Set up the data field */ - CAN->sTxMailBox[TransmitMailbox].TDLR = (((u32)TxMessage->Data[3] << 24) | - ((u32)TxMessage->Data[2] << 16) | - ((u32)TxMessage->Data[1] << 8) | - ((u32)TxMessage->Data[0])); - CAN->sTxMailBox[TransmitMailbox].TDHR = (((u32)TxMessage->Data[7] << 24) | - ((u32)TxMessage->Data[6] << 16) | - ((u32)TxMessage->Data[5] << 8) | - ((u32)TxMessage->Data[4])); - - /* Request transmission */ - CAN->sTxMailBox[TransmitMailbox].TIR |= CAN_TMIDxR_TXRQ; - } - - return TransmitMailbox; -} - -/******************************************************************************* -* Function Name : CAN_TransmitStatus -* Description : Checks the transmission of a message. -* Input : TransmitMailbox: the number of the mailbox that is used for -* transmission. -* Output : None. -* Return : CANTXOK if the CAN driver transmits the message, CANTXFAILED -* in an other case. -*******************************************************************************/ -u8 CAN_TransmitStatus(u8 TransmitMailbox) -{ - /* RQCP, TXOK and TME bits */ - u8 State = 0; - - /* Check the parameters */ - assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox)); - - switch (TransmitMailbox) - { - case (0): State |= (u8)((CAN->TSR & CAN_TSR_RQCP0) << 2); - State |= (u8)((CAN->TSR & CAN_TSR_TXOK0) >> 0); - State |= (u8)((CAN->TSR & CAN_TSR_TME0) >> 26); - break; - case (1): State |= (u8)((CAN->TSR & CAN_TSR_RQCP1) >> 6); - State |= (u8)((CAN->TSR & CAN_TSR_TXOK1) >> 8); - State |= (u8)((CAN->TSR & CAN_TSR_TME1) >> 27); - break; - case (2): State |= (u8)((CAN->TSR & CAN_TSR_RQCP2) >> 14); - State |= (u8)((CAN->TSR & CAN_TSR_TXOK2) >> 16); - State |= (u8)((CAN->TSR & CAN_TSR_TME2) >> 28); - break; - default: - State = CANTXFAILED; - break; - } - - switch (State) - { - /* transmit pending */ - case (0x0): State = CANTXPENDING; - break; - /* transmit failed */ - case (0x5): State = CANTXFAILED; - break; - /* transmit succedeed */ - case (0x7): State = CANTXOK; - break; - default: - State = CANTXFAILED; - break; - } - - return State; -} - -/******************************************************************************* -* Function Name : CAN_CancelTransmit -* Description : Cancels a transmit request. -* Input : Mailbox number. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_CancelTransmit(u8 Mailbox) -{ - /* Check the parameters */ - assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox)); - - /* abort transmission */ - switch (Mailbox) - { - case (0): CAN->TSR |= CAN_TSR_ABRQ0; - break; - case (1): CAN->TSR |= CAN_TSR_ABRQ1; - break; - case (2): CAN->TSR |= CAN_TSR_ABRQ2; - break; - default: - break; - } -} - -/******************************************************************************* -* Function Name : CAN_FIFORelease -* Description : Releases a FIFO. -* Input : FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_FIFORelease(u8 FIFONumber) -{ - /* Check the parameters */ - assert_param(IS_CAN_FIFO(FIFONumber)); - - /* Release FIFO0 */ - if (FIFONumber == CAN_FIFO0) - { - CAN->RF0R = CAN_RF0R_RFOM0; - } - /* Release FIFO1 */ - else /* FIFONumber == CAN_FIFO1 */ - { - CAN->RF1R = CAN_RF1R_RFOM1; - } -} - -/******************************************************************************* -* Function Name : CAN_MessagePending -* Description : Returns the number of pending messages. -* Input : FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. -* Output : None. -* Return : NbMessage which is the number of pending message. -*******************************************************************************/ -u8 CAN_MessagePending(u8 FIFONumber) -{ - u8 MessagePending=0; - - /* Check the parameters */ - assert_param(IS_CAN_FIFO(FIFONumber)); - - if (FIFONumber == CAN_FIFO0) - { - MessagePending = (u8)(CAN->RF0R&(u32)0x03); - } - else if (FIFONumber == CAN_FIFO1) - { - MessagePending = (u8)(CAN->RF1R&(u32)0x03); - } - else - { - MessagePending = 0; - } - return MessagePending; -} - -/******************************************************************************* -* Function Name : CAN_Receive -* Description : Receives a message. -* Input : FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. -* Output : RxMessage: pointer to a structure which contains CAN Id, -* CAN DLC, CAN datas and FMI number. -* Return : None. -*******************************************************************************/ -void CAN_Receive(u8 FIFONumber, CanRxMsg* RxMessage) -{ - /* Check the parameters */ - assert_param(IS_CAN_FIFO(FIFONumber)); - - /* Get the Id */ - RxMessage->IDE = (u8)0x04 & CAN->sFIFOMailBox[FIFONumber].RIR; - if (RxMessage->IDE == CAN_ID_STD) - { - RxMessage->StdId = (u32)0x000007FF & (CAN->sFIFOMailBox[FIFONumber].RIR >> 21); - } - else - { - RxMessage->ExtId = (u32)0x1FFFFFFF & (CAN->sFIFOMailBox[FIFONumber].RIR >> 3); - } - - RxMessage->RTR = (u8)0x02 & CAN->sFIFOMailBox[FIFONumber].RIR; - - /* Get the DLC */ - RxMessage->DLC = (u8)0x0F & CAN->sFIFOMailBox[FIFONumber].RDTR; - - /* Get the FMI */ - RxMessage->FMI = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDTR >> 8); - - /* Get the data field */ - RxMessage->Data[0] = (u8)0xFF & CAN->sFIFOMailBox[FIFONumber].RDLR; - RxMessage->Data[1] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDLR >> 8); - RxMessage->Data[2] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDLR >> 16); - RxMessage->Data[3] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDLR >> 24); - - RxMessage->Data[4] = (u8)0xFF & CAN->sFIFOMailBox[FIFONumber].RDHR; - RxMessage->Data[5] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDHR >> 8); - RxMessage->Data[6] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDHR >> 16); - RxMessage->Data[7] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDHR >> 24); - - /* Release the FIFO */ - CAN_FIFORelease(FIFONumber); -} - -/******************************************************************************* -* Function Name : CAN_Sleep -* Description : Enters the low power mode. -* Input : None. -* Output : None. -* Return : CANSLEEPOK if sleep entered, CANSLEEPFAILED in an other case. -*******************************************************************************/ -u8 CAN_Sleep(void) -{ - u8 SleepStatus = 0; - - /* Sleep mode entering request */ - CAN->MCR |= CAN_MCR_SLEEP; - SleepStatus = CANSLEEPOK; - - /* Sleep mode status */ - if ((CAN->MCR&CAN_MCR_SLEEP) == 0) - { - /* Sleep mode not entered */ - SleepStatus = CANSLEEPFAILED; - } - - /* At this step, sleep mode status */ - return SleepStatus; -} - -/******************************************************************************* -* Function Name : CAN_WakeUp -* Description : Wakes the CAN up. -* Input : None. -* Output : None. -* Return : CANWAKEUPOK if sleep mode left, CANWAKEUPFAILED in an other -* case. -*******************************************************************************/ -u8 CAN_WakeUp(void) -{ - u8 WakeUpStatus = 0; - - /* Wake up request */ - CAN->MCR &= ~CAN_MCR_SLEEP; - WakeUpStatus = CANWAKEUPFAILED; - - /* Sleep mode status */ - if ((CAN->MCR&CAN_MCR_SLEEP) == 0) - { - /* Sleep mode exited */ - WakeUpStatus = CANWAKEUPOK; - } - - /* At this step, sleep mode status */ - return WakeUpStatus; -} - -/******************************************************************************* -* Function Name : CAN_GetFlagStatus -* Description : Checks whether the specified CAN flag is set or not. -* Input : CAN_FLAG: specifies the flag to check. -* This parameter can be: CAN_FLAG_EWG, CAN_FLAG_EPV or -* CAN_FLAG_BOF. -* Output : None. -* Return : The new state of CAN_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus CAN_GetFlagStatus(u32 CAN_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_CAN_FLAG(CAN_FLAG)); - - /* Check the status of the specified CAN flag */ - if ((CAN->ESR & CAN_FLAG) != (u32)RESET) - { - /* CAN_FLAG is set */ - bitstatus = SET; - } - else - { - /* CAN_FLAG is reset */ - bitstatus = RESET; - } - /* Return the CAN_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : CAN_ClearFlag -* Description : Clears the CAN's pending flags. -* Input : CAN_FLAG: specifies the flag to clear. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_ClearFlag(u32 CAN_FLAG) -{ - /* Check the parameters */ - assert_param(IS_CAN_FLAG(CAN_FLAG)); - - /* Clear the selected CAN flags */ - CAN->ESR &= ~CAN_FLAG; -} - -/******************************************************************************* -* Function Name : CAN_GetITStatus -* Description : Checks whether the specified CAN interrupt has occurred or -* not. -* Input : CAN_IT: specifies the CAN interrupt source to check. -* This parameter can be: CAN_IT_RQCP0, CAN_IT_RQCP1, CAN_IT_RQCP2, -* CAN_IT_FF0, CAN_IT_FOV0, CAN_IT_FF1, -* CAN_IT_FOV1, CAN_IT_EWG, CAN_IT_EPV, -* CAN_IT_BOF, CAN_IT_WKU or CAN_IT_SLK. -* Output : None. -* Return : The new state of CAN_IT (SET or RESET). -*******************************************************************************/ -ITStatus CAN_GetITStatus(u32 CAN_IT) -{ - ITStatus pendingbitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_CAN_ITStatus(CAN_IT)); - - switch (CAN_IT) - { - case CAN_IT_RQCP0: - pendingbitstatus = CheckITStatus(CAN->TSR, CAN_TSR_RQCP0); - break; - case CAN_IT_RQCP1: - pendingbitstatus = CheckITStatus(CAN->TSR, CAN_TSR_RQCP1); - break; - case CAN_IT_RQCP2: - pendingbitstatus = CheckITStatus(CAN->TSR, CAN_TSR_RQCP2); - break; - case CAN_IT_FF0: - pendingbitstatus = CheckITStatus(CAN->RF0R, CAN_RF0R_FULL0); - break; - case CAN_IT_FOV0: - pendingbitstatus = CheckITStatus(CAN->RF0R, CAN_RF0R_FOVR0); - break; - case CAN_IT_FF1: - pendingbitstatus = CheckITStatus(CAN->RF1R, CAN_RF1R_FULL1); - break; - case CAN_IT_FOV1: - pendingbitstatus = CheckITStatus(CAN->RF1R, CAN_RF1R_FOVR1); - break; - case CAN_IT_EWG: - pendingbitstatus = CheckITStatus(CAN->ESR, CAN_ESR_EWGF); - break; - case CAN_IT_EPV: - pendingbitstatus = CheckITStatus(CAN->ESR, CAN_ESR_EPVF); - break; - case CAN_IT_BOF: - pendingbitstatus = CheckITStatus(CAN->ESR, CAN_ESR_BOFF); - break; - case CAN_IT_SLK: - pendingbitstatus = CheckITStatus(CAN->MSR, CAN_MSR_SLAKI); - break; - case CAN_IT_WKU: - pendingbitstatus = CheckITStatus(CAN->MSR, CAN_MSR_WKUI); - break; - - default : - pendingbitstatus = RESET; - break; - } - - /* Return the CAN_IT status */ - return pendingbitstatus; -} - -/******************************************************************************* -* Function Name : CAN_ClearITPendingBit -* Description : Clears the CAN’s interrupt pending bits. -* Input : CAN_IT: specifies the interrupt pending bit to clear. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_ClearITPendingBit(u32 CAN_IT) -{ - /* Check the parameters */ - assert_param(IS_CAN_ITStatus(CAN_IT)); - - switch (CAN_IT) - { - case CAN_IT_RQCP0: - CAN->TSR = CAN_TSR_RQCP0; /* rc_w1*/ - break; - case CAN_IT_RQCP1: - CAN->TSR = CAN_TSR_RQCP1; /* rc_w1*/ - break; - case CAN_IT_RQCP2: - CAN->TSR = CAN_TSR_RQCP2; /* rc_w1*/ - break; - case CAN_IT_FF0: - CAN->RF0R = CAN_RF0R_FULL0; /* rc_w1*/ - break; - case CAN_IT_FOV0: - CAN->RF0R = CAN_RF0R_FOVR0; /* rc_w1*/ - break; - case CAN_IT_FF1: - CAN->RF1R = CAN_RF1R_FULL1; /* rc_w1*/ - break; - case CAN_IT_FOV1: - CAN->RF1R = CAN_RF1R_FOVR1; /* rc_w1*/ - break; - case CAN_IT_EWG: - CAN->ESR &= ~ CAN_ESR_EWGF; /* rw */ - break; - case CAN_IT_EPV: - CAN->ESR &= ~ CAN_ESR_EPVF; /* rw */ - break; - case CAN_IT_BOF: - CAN->ESR &= ~ CAN_ESR_BOFF; /* rw */ - break; - case CAN_IT_WKU: - CAN->MSR = CAN_MSR_WKUI; /* rc_w1*/ - break; - case CAN_IT_SLK: - CAN->MSR = CAN_MSR_SLAKI; /* rc_w1*/ - break; - default : - break; - } -} - -/******************************************************************************* -* Function Name : CheckITStatus -* Description : Checks whether the CAN interrupt has occurred or not. -* Input : CAN_Reg: specifies the CAN interrupt register to check. -* It_Bit: specifies the interrupt source bit to check. -* Output : None. -* Return : The new state of the CAN Interrupt (SET or RESET). -*******************************************************************************/ -static ITStatus CheckITStatus(u32 CAN_Reg, u32 It_Bit) -{ - ITStatus pendingbitstatus = RESET; - - if ((CAN_Reg & It_Bit) != (u32)RESET) - { - /* CAN_IT is set */ - pendingbitstatus = SET; - } - else - { - /* CAN_IT is reset */ - pendingbitstatus = RESET; - } - - return pendingbitstatus; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_crc.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_crc.c deleted file mode 100755 index 9ba3089..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_crc.c +++ /dev/null @@ -1,114 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_crc.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the CRC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_crc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* CR register bit mask */ -#define CR_RESET_Set ((u32)0x00000001) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : CRC_ResetDR -* Description : Resets the CRC Data register (DR). -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CRC_ResetDR(void) -{ - /* Reset CRC generator */ - CRC->CR = CR_RESET_Set; -} - -/******************************************************************************* -* Function Name : CRC_CalcCRC -* Description : Computes the 32-bit CRC of a given data word(32-bit). -* Input : - Data: data word(32-bit) to compute its CRC -* Output : None -* Return : 32-bit CRC -*******************************************************************************/ -u32 CRC_CalcCRC(u32 Data) -{ - CRC->DR = Data; - - return (CRC->DR); -} - -/******************************************************************************* -* Function Name : CRC_CalcBlockCRC -* Description : Computes the 32-bit CRC of a given buffer of data word(32-bit). -* Input : - pBuffer: pointer to the buffer containing the data to be -* computed -* - BufferLength: length of the buffer to be computed -* Output : None -* Return : 32-bit CRC -*******************************************************************************/ -u32 CRC_CalcBlockCRC(u32 pBuffer[], u32 BufferLength) -{ - u32 index = 0; - - for(index = 0; index < BufferLength; index++) - { - CRC->DR = pBuffer[index]; - } - - return (CRC->DR); -} - -/******************************************************************************* -* Function Name : CRC_GetCRC -* Description : Returns the current CRC value. -* Input : None -* Output : None -* Return : 32-bit CRC -*******************************************************************************/ -u32 CRC_GetCRC(void) -{ - return (CRC->DR); -} - -/******************************************************************************* -* Function Name : CRC_SetIDRegister -* Description : Stores a 8-bit data in the Independent Data(ID) register. -* Input : - IDValue: 8-bit value to be stored in the ID register -* Output : None -* Return : None -*******************************************************************************/ -void CRC_SetIDRegister(u8 IDValue) -{ - CRC->IDR = IDValue; -} - -/******************************************************************************* -* Function Name : CRC_GetIDRegister -* Description : Returns the 8-bit data stored in the Independent Data(ID) register -* Input : None -* Output : None -* Return : 8-bit value of the ID register -*******************************************************************************/ -u8 CRC_GetIDRegister(void) -{ - return (CRC->IDR); -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dac.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dac.c deleted file mode 100755 index 12b1c92..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dac.c +++ /dev/null @@ -1,389 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dac.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the DAC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dac.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* DAC EN mask */ -#define CR_EN_Set ((u32)0x00000001) - -/* DAC DMAEN mask */ -#define CR_DMAEN_Set ((u32)0x00001000) - -/* CR register Mask */ -#define CR_CLEAR_Mask ((u32)0x00000FFE) - -/* DAC SWTRIG mask */ -#define SWTRIGR_SWTRIG_Set ((u32)0x00000001) - -/* DAC Dual Channels SWTRIG masks */ -#define DUAL_SWTRIG_Set ((u32)0x00000003) -#define DUAL_SWTRIG_Reset ((u32)0xFFFFFFFC) - -/* DHR registers offsets */ -#define DHR12R1_Offset ((u32)0x00000008) -#define DHR12R2_Offset ((u32)0x00000014) -#define DHR12RD_Offset ((u32)0x00000020) - -/* DOR register offset */ -#define DOR_Offset ((u32)0x0000002C) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : DAC_DeInit -* Description : Deinitializes the DAC peripheral registers to their default -* reset values. -* Input : None. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_DeInit(void) -{ - /* Enable DAC reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE); - /* Release DAC from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE); -} - -/******************************************************************************* -* Function Name : DAC_Init -* Description : Initializes the DAC peripheral according to the specified -* parameters in the DAC_InitStruct. -* Input : - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - DAC_InitStruct: pointer to a DAC_InitTypeDef structure that -* contains the configuration information for the specified -* DAC channel. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_Init(u32 DAC_Channel, DAC_InitTypeDef* DAC_InitStruct) -{ - u32 tmpreg1 = 0, tmpreg2 = 0; - - /* Check the DAC parameters */ - assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger)); - assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration)); - assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude)); - assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer)); - -/*---------------------------- DAC CR Configuration --------------------------*/ - /* Get the DAC CR value */ - tmpreg1 = DAC->CR; - /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ - tmpreg1 &= ~(CR_CLEAR_Mask << DAC_Channel); - /* Configure for the selected DAC channel: buffer output, trigger, wave genration, - mask/amplitude for wave genration */ - /* Set TSELx and TENx bits according to DAC_Trigger value */ - /* Set WAVEx bits according to DAC_WaveGeneration value */ - /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ - /* Set BOFFx bit according to DAC_OutputBuffer value */ - tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration | - DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer); - /* Calculate CR register value depending on DAC_Channel */ - tmpreg1 |= tmpreg2 << DAC_Channel; - /* Write to DAC CR */ - DAC->CR = tmpreg1; -} - -/******************************************************************************* -* Function Name : DAC_StructInit -* Description : Fills each DAC_InitStruct member with its default value. -* Input : - DAC_InitStruct : pointer to a DAC_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct) -{ -/*--------------- Reset DAC init structure parameters values -----------------*/ - /* Initialize the DAC_Trigger member */ - DAC_InitStruct->DAC_Trigger = DAC_Trigger_None; - - /* Initialize the DAC_WaveGeneration member */ - DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None; - - /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */ - DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0; - - /* Initialize the DAC_OutputBuffer member */ - DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable; -} - -/******************************************************************************* -* Function Name : DAC_Cmd -* Description : Enables or disables the specified DAC channel. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - NewState: new state of the DAC channel. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_Cmd(u32 DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DAC channel */ - DAC->CR |= CR_EN_Set << DAC_Channel; - } - else - { - /* Disable the selected DAC channel */ - DAC->CR &= ~(CR_EN_Set << DAC_Channel); - } -} - -/******************************************************************************* -* Function Name : DAC_DMACmd -* Description : Enables or disables the specified DAC channel DMA request. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - NewState: new state of the selected DAC channel DMA request. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_DMACmd(u32 DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DAC channel DMA request */ - DAC->CR |= CR_DMAEN_Set << DAC_Channel; - } - else - { - /* Disable the selected DAC channel DMA request */ - DAC->CR &= ~(CR_DMAEN_Set << DAC_Channel); - } -} - -/******************************************************************************* -* Function Name : DAC_SoftwareTriggerCmd -* Description : Enables or disables the selected DAC channel software trigger. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - NewState: new state of the selected DAC channel software trigger. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_SoftwareTriggerCmd(u32 DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable software trigger for the selected DAC channel */ - DAC->SWTRIGR |= SWTRIGR_SWTRIG_Set << (DAC_Channel >> 4); - } - else - { - /* Disable software trigger for the selected DAC channel */ - DAC->SWTRIGR &= ~(SWTRIGR_SWTRIG_Set << (DAC_Channel >> 4)); - } -} - -/******************************************************************************* -* Function Name : DAC_DualSoftwareTriggerCmd -* Description : Enables or disables simultaneously the two DAC channels software -* triggers. -* Input - NewState: new state of the DAC channels software triggers. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_DualSoftwareTriggerCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable software trigger for both DAC channels */ - DAC->SWTRIGR |= DUAL_SWTRIG_Set ; - } - else - { - /* Disable software trigger for both DAC channels */ - DAC->SWTRIGR &= DUAL_SWTRIG_Reset; - } -} - -/******************************************************************************* -* Function Name : DAC_WaveGenerationCmd -* Description : Enables or disables the selected DAC channel wave generation. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - DAC_Wave: Specifies the wave type to enable or disable. -* This parameter can be one of the following values: -* - DAC_Wave_Noise: noise wave generation -* - DAC_Wave_Triangle: triangle wave generation -* - NewState: new state of the selected DAC channel wave generation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_WaveGenerationCmd(u32 DAC_Channel, u32 DAC_Wave, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_DAC_WAVE(DAC_Wave)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected wave generation for the selected DAC channel */ - DAC->CR |= DAC_Wave << DAC_Channel; - } - else - { - /* Disable the selected wave generation for the selected DAC channel */ - DAC->CR &= ~(DAC_Wave << DAC_Channel); - } -} - -/******************************************************************************* -* Function Name : DAC_SetChannel1Data -* Description : Set the specified data holding register value for DAC channel1. -* Input : - DAC_Align: Specifies the data alignement for DAC channel1. -* This parameter can be one of the following values: -* - DAC_Align_8b_R: 8bit right data alignement selected -* - DAC_Align_12b_L: 12bit left data alignement selected -* - DAC_Align_12b_R: 12bit right data alignement selected -* - Data : Data to be loaded in the selected data holding -* register. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_SetChannel1Data(u32 DAC_Align, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data)); - - /* Set the DAC channel1 selected data holding register */ - *((vu32 *)(DAC_BASE + DHR12R1_Offset + DAC_Align)) = (u32)Data; -} - -/******************************************************************************* -* Function Name : DAC_SetChannel2Data -* Description : Set the specified data holding register value for DAC channel2. -* Input : - DAC_Align: Specifies the data alignement for DAC channel2. -* This parameter can be one of the following values: -* - DAC_Align_8b_R: 8bit right data alignement selected -* - DAC_Align_12b_L: 12bit left data alignement selected -* - DAC_Align_12b_R: 12bit right data alignement selected -* - Data : Data to be loaded in the selected data holding -* register. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_SetChannel2Data(u32 DAC_Align, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data)); - - /* Set the DAC channel2 selected data holding register */ - *((vu32 *)(DAC_BASE + DHR12R2_Offset + DAC_Align)) = (u32)Data; -} - -/******************************************************************************* -* Function Name : DAC_SetDualChannelData -* Description : Set the specified data holding register value for dual channel -* DAC. -* Input : - DAC_Align: Specifies the data alignement for dual channel DAC. -* This parameter can be one of the following values: -* - DAC_Align_8b_R: 8bit right data alignement selected -* - DAC_Align_12b_L: 12bit left data alignement selected -* - DAC_Align_12b_R: 12bit right data alignement selected -* - Data2: Data for DAC Channel2 to be loaded in the selected data -* holding register. -* - Data1: Data for DAC Channel1 to be loaded in the selected data -* holding register. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_SetDualChannelData(u32 DAC_Align, u16 Data2, u16 Data1) -{ - u32 Data = 0; - - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data1)); - assert_param(IS_DAC_DATA(Data2)); - - /* Calculate and set dual DAC data holding register value */ - if (DAC_Align == DAC_Align_8b_R) - { - Data = ((u32)Data2 << 8) | Data1; - } - else - { - Data = ((u32)Data2 << 16) | Data1; - } - - /* Set the dual DAC selected data holding register */ - *((vu32 *)(DAC_BASE + DHR12RD_Offset + DAC_Align)) = Data; -} - -/******************************************************************************* -* Function Name : DAC_GetDataOutputValue -* Description : Returns the last data output value of the selected DAC cahnnel. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* Output : None -* Return : The selected DAC channel data output value. -*******************************************************************************/ -u16 DAC_GetDataOutputValue(u32 DAC_Channel) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - - /* Returns the DAC channel data output register value */ - return (u16) (*(vu32*)(DAC_BASE + DOR_Offset + ((u32)DAC_Channel >> 2))); -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dbgmcu.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dbgmcu.c deleted file mode 100755 index 1e0dd54..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dbgmcu.c +++ /dev/null @@ -1,97 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dbgmcu.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the DBGMCU firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dbgmcu.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define IDCODE_DEVID_Mask ((u32)0x00000FFF) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : DBGMCU_GetREVID -* Description : Returns the device revision identifier. -* Input : None -* Output : None -* Return : Device revision identifier -*******************************************************************************/ -u32 DBGMCU_GetREVID(void) -{ - return(DBGMCU->IDCODE >> 16); -} - -/******************************************************************************* -* Function Name : DBGMCU_GetDEVID -* Description : Returns the device identifier. -* Input : None -* Output : None -* Return : Device identifier -*******************************************************************************/ -u32 DBGMCU_GetDEVID(void) -{ - return(DBGMCU->IDCODE & IDCODE_DEVID_Mask); -} - -/******************************************************************************* -* Function Name : DBGMCU_Config -* Description : Configures the specified peripheral and low power mode behavior -* when the MCU under Debug mode. -* Input : - DBGMCU_Periph: specifies the peripheral and low power mode. -* This parameter can be any combination of the following values: -* - DBGMCU_SLEEP: Keep debugger connection during SLEEP mode -* - DBGMCU_STOP: Keep debugger connection during STOP mode -* - DBGMCU_STANDBY: Keep debugger connection during STANDBY mode -* - DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted -* - DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted -* - DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted -* - DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted -* - DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted -* - DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted -* - DBGMCU_CAN_STOP: Debug CAN stopped when Core is halted -* - DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped -* when Core is halted -* - DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped -* when Core is halted -* - DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted -* - DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted -* - DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted -* - DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted -* - NewState: new state of the specified peripheral in Debug mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DBGMCU_Config(u32 DBGMCU_Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - DBGMCU->CR |= DBGMCU_Periph; - } - else - { - DBGMCU->CR &= ~DBGMCU_Periph; - } -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dma.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dma.c deleted file mode 100755 index 3cf55c8..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_dma.c +++ /dev/null @@ -1,678 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dma.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the DMA firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dma.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* DMA ENABLE mask */ -#define CCR_ENABLE_Set ((u32)0x00000001) -#define CCR_ENABLE_Reset ((u32)0xFFFFFFFE) - -/* DMA1 Channelx interrupt pending bit masks */ -#define DMA1_Channel1_IT_Mask ((u32)0x0000000F) -#define DMA1_Channel2_IT_Mask ((u32)0x000000F0) -#define DMA1_Channel3_IT_Mask ((u32)0x00000F00) -#define DMA1_Channel4_IT_Mask ((u32)0x0000F000) -#define DMA1_Channel5_IT_Mask ((u32)0x000F0000) -#define DMA1_Channel6_IT_Mask ((u32)0x00F00000) -#define DMA1_Channel7_IT_Mask ((u32)0x0F000000) - -/* DMA2 Channelx interrupt pending bit masks */ -#define DMA2_Channel1_IT_Mask ((u32)0x0000000F) -#define DMA2_Channel2_IT_Mask ((u32)0x000000F0) -#define DMA2_Channel3_IT_Mask ((u32)0x00000F00) -#define DMA2_Channel4_IT_Mask ((u32)0x0000F000) -#define DMA2_Channel5_IT_Mask ((u32)0x000F0000) - -/* DMA2 FLAG mask */ -#define FLAG_Mask ((u32)0x10000000) - -/* DMA registers Masks */ -#define CCR_CLEAR_Mask ((u32)0xFFFF800F) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : DMA_DeInit -* Description : Deinitializes the DMAy Channelx registers to their default reset -* values. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - - /* Disable the selected DMAy Channelx */ - DMAy_Channelx->CCR &= CCR_ENABLE_Reset; - - /* Reset DMAy Channelx control register */ - DMAy_Channelx->CCR = 0; - - /* Reset DMAy Channelx remaining bytes register */ - DMAy_Channelx->CNDTR = 0; - - /* Reset DMAy Channelx peripheral address register */ - DMAy_Channelx->CPAR = 0; - - /* Reset DMAy Channelx memory address register */ - DMAy_Channelx->CMAR = 0; - - switch (*(u32*)&DMAy_Channelx) - { - case DMA1_Channel1_BASE: - /* Reset interrupt pending bits for DMA1 Channel1 */ - DMA1->IFCR |= DMA1_Channel1_IT_Mask; - break; - - case DMA1_Channel2_BASE: - /* Reset interrupt pending bits for DMA1 Channel2 */ - DMA1->IFCR |= DMA1_Channel2_IT_Mask; - break; - - case DMA1_Channel3_BASE: - /* Reset interrupt pending bits for DMA1 Channel3 */ - DMA1->IFCR |= DMA1_Channel3_IT_Mask; - break; - - case DMA1_Channel4_BASE: - /* Reset interrupt pending bits for DMA1 Channel4 */ - DMA1->IFCR |= DMA1_Channel4_IT_Mask; - break; - - case DMA1_Channel5_BASE: - /* Reset interrupt pending bits for DMA1 Channel5 */ - DMA1->IFCR |= DMA1_Channel5_IT_Mask; - break; - - case DMA1_Channel6_BASE: - /* Reset interrupt pending bits for DMA1 Channel6 */ - DMA1->IFCR |= DMA1_Channel6_IT_Mask; - break; - - case DMA1_Channel7_BASE: - /* Reset interrupt pending bits for DMA1 Channel7 */ - DMA1->IFCR |= DMA1_Channel7_IT_Mask; - break; - - case DMA2_Channel1_BASE: - /* Reset interrupt pending bits for DMA2 Channel1 */ - DMA2->IFCR |= DMA2_Channel1_IT_Mask; - break; - - case DMA2_Channel2_BASE: - /* Reset interrupt pending bits for DMA2 Channel2 */ - DMA2->IFCR |= DMA2_Channel2_IT_Mask; - break; - - case DMA2_Channel3_BASE: - /* Reset interrupt pending bits for DMA2 Channel3 */ - DMA2->IFCR |= DMA2_Channel3_IT_Mask; - break; - - case DMA2_Channel4_BASE: - /* Reset interrupt pending bits for DMA2 Channel4 */ - DMA2->IFCR |= DMA2_Channel4_IT_Mask; - break; - - case DMA2_Channel5_BASE: - /* Reset interrupt pending bits for DMA2 Channel5 */ - DMA2->IFCR |= DMA2_Channel5_IT_Mask; - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : DMA_Init -* Description : Initializes the DMAy Channelx according to the specified -* parameters in the DMA_InitStruct. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* - DMA_InitStruct: pointer to a DMA_InitTypeDef structure that -* contains the configuration information for the specified -* DMA Channel. -* Output : None -* Return : None -******************************************************************************/ -void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR)); - assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); - assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); - assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); - assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M)); - -/*--------------------------- DMAy Channelx CCR Configuration -----------------*/ - /* Get the DMAy_Channelx CCR value */ - tmpreg = DMAy_Channelx->CCR; - /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ - tmpreg &= CCR_CLEAR_Mask; - /* Configure DMAy Channelx: data transfer, data size, priority level and mode */ - /* Set DIR bit according to DMA_DIR value */ - /* Set CIRC bit according to DMA_Mode value */ - /* Set PINC bit according to DMA_PeripheralInc value */ - /* Set MINC bit according to DMA_MemoryInc value */ - /* Set PSIZE bits according to DMA_PeripheralDataSize value */ - /* Set MSIZE bits according to DMA_MemoryDataSize value */ - /* Set PL bits according to DMA_Priority value */ - /* Set the MEM2MEM bit according to DMA_M2M value */ - tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode | - DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | - DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | - DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M; - /* Write to DMAy Channelx CCR */ - DMAy_Channelx->CCR = tmpreg; - -/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ - /* Write to DMAy Channelx CNDTR */ - DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize; - -/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/ - /* Write to DMAy Channelx CPAR */ - DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr; - -/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/ - /* Write to DMAy Channelx CMAR */ - DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr; -} - -/******************************************************************************* -* Function Name : DMA_StructInit -* Description : Fills each DMA_InitStruct member with its default value. -* Input : - DMA_InitStruct : pointer to a DMA_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) -{ -/*-------------- Reset DMA init structure parameters values ------------------*/ - /* Initialize the DMA_PeripheralBaseAddr member */ - DMA_InitStruct->DMA_PeripheralBaseAddr = 0; - - /* Initialize the DMA_MemoryBaseAddr member */ - DMA_InitStruct->DMA_MemoryBaseAddr = 0; - - /* Initialize the DMA_DIR member */ - DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC; - - /* Initialize the DMA_BufferSize member */ - DMA_InitStruct->DMA_BufferSize = 0; - - /* Initialize the DMA_PeripheralInc member */ - DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; - - /* Initialize the DMA_MemoryInc member */ - DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; - - /* Initialize the DMA_PeripheralDataSize member */ - DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; - - /* Initialize the DMA_MemoryDataSize member */ - DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; - - /* Initialize the DMA_Mode member */ - DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; - - /* Initialize the DMA_Priority member */ - DMA_InitStruct->DMA_Priority = DMA_Priority_Low; - - /* Initialize the DMA_M2M member */ - DMA_InitStruct->DMA_M2M = DMA_M2M_Disable; -} - -/******************************************************************************* -* Function Name : DMA_Cmd -* Description : Enables or disables the specified DMAy Channelx. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* - NewState: new state of the DMAy Channelx. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DMAy Channelx */ - DMAy_Channelx->CCR |= CCR_ENABLE_Set; - } - else - { - /* Disable the selected DMAy Channelx */ - DMAy_Channelx->CCR &= CCR_ENABLE_Reset; - } -} - -/******************************************************************************* -* Function Name : DMA_ITConfig -* Description : Enables or disables the specified DMAy Channelx interrupts. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* - DMA_IT: specifies the DMA interrupts sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - DMA_IT_TC: Transfer complete interrupt mask -* - DMA_IT_HT: Half transfer interrupt mask -* - DMA_IT_TE: Transfer error interrupt mask -* - NewState: new state of the specified DMA interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, u32 DMA_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_DMA_CONFIG_IT(DMA_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DMA interrupts */ - DMAy_Channelx->CCR |= DMA_IT; - } - else - { - /* Disable the selected DMA interrupts */ - DMAy_Channelx->CCR &= ~DMA_IT; - } -} - -/******************************************************************************* -* Function Name : DMA_GetCurrDataCounter -* Description : Returns the number of remaining data units in the current -* DMAy Channelx transfer. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* Output : None -* Return : The number of remaining data units in the current DMAy Channelx -* transfer. -*******************************************************************************/ -u16 DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - - /* Return the number of remaining data units for DMAy Channelx */ - return ((u16)(DMAy_Channelx->CNDTR)); -} - -/******************************************************************************* -* Function Name : DMA_GetFlagStatus -* Description : Checks whether the specified DMAy Channelx flag is set or not. -* Input : - DMA_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - DMA1_FLAG_GL1: DMA1 Channel1 global flag. -* - DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. -* - DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. -* - DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. -* - DMA1_FLAG_GL2: DMA1 Channel2 global flag. -* - DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. -* - DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. -* - DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. -* - DMA1_FLAG_GL3: DMA1 Channel3 global flag. -* - DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. -* - DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. -* - DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. -* - DMA1_FLAG_GL4: DMA1 Channel4 global flag. -* - DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. -* - DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. -* - DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. -* - DMA1_FLAG_GL5: DMA1 Channel5 global flag. -* - DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. -* - DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. -* - DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. -* - DMA1_FLAG_GL6: DMA1 Channel6 global flag. -* - DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. -* - DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. -* - DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. -* - DMA1_FLAG_GL7: DMA1 Channel7 global flag. -* - DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. -* - DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. -* - DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. -* - DMA2_FLAG_GL1: DMA2 Channel1 global flag. -* - DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. -* - DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. -* - DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. -* - DMA2_FLAG_GL2: DMA2 Channel2 global flag. -* - DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. -* - DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. -* - DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. -* - DMA2_FLAG_GL3: DMA2 Channel3 global flag. -* - DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. -* - DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. -* - DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. -* - DMA2_FLAG_GL4: DMA2 Channel4 global flag. -* - DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. -* - DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. -* - DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. -* - DMA2_FLAG_GL5: DMA2 Channel5 global flag. -* - DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. -* - DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. -* - DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. -* Output : None -* Return : The new state of DMA_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus DMA_GetFlagStatus(u32 DMA_FLAG) -{ - FlagStatus bitstatus = RESET; - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_GET_FLAG(DMA_FLAG)); - - /* Calculate the used DMA */ - if ((DMA_FLAG & FLAG_Mask) != (u32)RESET) - { - /* Get DMA2 ISR register value */ - tmpreg = DMA2->ISR ; - } - else - { - /* Get DMA1 ISR register value */ - tmpreg = DMA1->ISR ; - } - - /* Check the status of the specified DMA flag */ - if ((tmpreg & DMA_FLAG) != (u32)RESET) - { - /* DMA_FLAG is set */ - bitstatus = SET; - } - else - { - /* DMA_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the DMA_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : DMA_ClearFlag -* Description : Clears the DMAy Channelx's pending flags. -* Input : - DMA_FLAG: specifies the flag to clear. -* This parameter can be any combination (for the same DMA) of -* the following values: -* - DMA1_FLAG_GL1: DMA1 Channel1 global flag. -* - DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. -* - DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. -* - DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. -* - DMA1_FLAG_GL2: DMA1 Channel2 global flag. -* - DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. -* - DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. -* - DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. -* - DMA1_FLAG_GL3: DMA1 Channel3 global flag. -* - DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. -* - DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. -* - DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. -* - DMA1_FLAG_GL4: DMA1 Channel4 global flag. -* - DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. -* - DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. -* - DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. -* - DMA1_FLAG_GL5: DMA1 Channel5 global flag. -* - DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. -* - DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. -* - DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. -* - DMA1_FLAG_GL6: DMA1 Channel6 global flag. -* - DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. -* - DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. -* - DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. -* - DMA1_FLAG_GL7: DMA1 Channel7 global flag. -* - DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. -* - DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. -* - DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. -* - DMA2_FLAG_GL1: DMA2 Channel1 global flag. -* - DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. -* - DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. -* - DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. -* - DMA2_FLAG_GL2: DMA2 Channel2 global flag. -* - DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. -* - DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. -* - DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. -* - DMA2_FLAG_GL3: DMA2 Channel3 global flag. -* - DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. -* - DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. -* - DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. -* - DMA2_FLAG_GL4: DMA2 Channel4 global flag. -* - DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. -* - DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. -* - DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. -* - DMA2_FLAG_GL5: DMA2 Channel5 global flag. -* - DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. -* - DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. -* - DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_ClearFlag(u32 DMA_FLAG) -{ - /* Check the parameters */ - assert_param(IS_DMA_CLEAR_FLAG(DMA_FLAG)); - - /* Calculate the used DMA */ - if ((DMA_FLAG & FLAG_Mask) != (u32)RESET) - { - /* Clear the selected DMA flags */ - DMA2->IFCR = DMA_FLAG; - } - else - { - /* Clear the selected DMA flags */ - DMA1->IFCR = DMA_FLAG; - } -} - -/******************************************************************************* -* Function Name : DMA_GetITStatus -* Description : Checks whether the specified DMAy Channelx interrupt has -* occurred or not. -* Input : - DMA_IT: specifies the DMA interrupt source to check. -* This parameter can be one of the following values: -* - DMA1_IT_GL1: DMA1 Channel1 global interrupt. -* - DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. -* - DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. -* - DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. -* - DMA1_IT_GL2: DMA1 Channel2 global interrupt. -* - DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. -* - DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. -* - DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. -* - DMA1_IT_GL3: DMA1 Channel3 global interrupt. -* - DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. -* - DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. -* - DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. -* - DMA1_IT_GL4: DMA1 Channel4 global interrupt. -* - DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. -* - DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. -* - DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. -* - DMA1_IT_GL5: DMA1 Channel5 global interrupt. -* - DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. -* - DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. -* - DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. -* - DMA1_IT_GL6: DMA1 Channel6 global interrupt. -* - DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. -* - DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. -* - DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. -* - DMA1_IT_GL7: DMA1 Channel7 global interrupt. -* - DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. -* - DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. -* - DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. -* - DMA2_IT_GL1: DMA2 Channel1 global interrupt. -* - DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. -* - DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. -* - DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. -* - DMA2_IT_GL2: DMA2 Channel2 global interrupt. -* - DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. -* - DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. -* - DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. -* - DMA2_IT_GL3: DMA2 Channel3 global interrupt. -* - DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. -* - DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. -* - DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. -* - DMA2_IT_GL4: DMA2 Channel4 global interrupt. -* - DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. -* - DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. -* - DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. -* - DMA2_IT_GL5: DMA2 Channel5 global interrupt. -* - DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. -* - DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. -* - DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. -* Output : None -* Return : The new state of DMA_IT (SET or RESET). -*******************************************************************************/ -ITStatus DMA_GetITStatus(u32 DMA_IT) -{ - ITStatus bitstatus = RESET; - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_GET_IT(DMA_IT)); - - /* Calculate the used DMA */ - if ((DMA_IT & FLAG_Mask) != (u32)RESET) - { - /* Get DMA2 ISR register value */ - tmpreg = DMA2->ISR ; - } - else - { - /* Get DMA1 ISR register value */ - tmpreg = DMA1->ISR ; - } - - /* Check the status of the specified DMA interrupt */ - if ((tmpreg & DMA_IT) != (u32)RESET) - { - /* DMA_IT is set */ - bitstatus = SET; - } - else - { - /* DMA_IT is reset */ - bitstatus = RESET; - } - /* Return the DMA_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : DMA_ClearITPendingBit -* Description : Clears the DMAy Channelx’s interrupt pending bits. -* Input : - DMA_IT: specifies the DMA interrupt pending bit to clear. -* This parameter can be any combination (for the same DMA) of -* the following values: -* - DMA1_IT_GL1: DMA1 Channel1 global interrupt. -* - DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. -* - DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. -* - DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. -* - DMA1_IT_GL2: DMA1 Channel2 global interrupt. -* - DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. -* - DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. -* - DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. -* - DMA1_IT_GL3: DMA1 Channel3 global interrupt. -* - DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. -* - DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. -* - DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. -* - DMA1_IT_GL4: DMA1 Channel4 global interrupt. -* - DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. -* - DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. -* - DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. -* - DMA1_IT_GL5: DMA1 Channel5 global interrupt. -* - DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. -* - DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. -* - DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. -* - DMA1_IT_GL6: DMA1 Channel6 global interrupt. -* - DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. -* - DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. -* - DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. -* - DMA1_IT_GL7: DMA1 Channel7 global interrupt. -* - DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. -* - DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. -* - DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. -* - DMA2_IT_GL1: DMA2 Channel1 global interrupt. -* - DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. -* - DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. -* - DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. -* - DMA2_IT_GL2: DMA2 Channel2 global interrupt. -* - DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. -* - DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. -* - DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. -* - DMA2_IT_GL3: DMA2 Channel3 global interrupt. -* - DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. -* - DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. -* - DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. -* - DMA2_IT_GL4: DMA2 Channel4 global interrupt. -* - DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. -* - DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. -* - DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. -* - DMA2_IT_GL5: DMA2 Channel5 global interrupt. -* - DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. -* - DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. -* - DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_ClearITPendingBit(u32 DMA_IT) -{ - /* Check the parameters */ - assert_param(IS_DMA_CLEAR_IT(DMA_IT)); - - /* Calculate the used DMA */ - if ((DMA_IT & FLAG_Mask) != (u32)RESET) - { - /* Clear the selected DMA interrupt pending bits */ - DMA2->IFCR = DMA_IT; - } - else - { - /* Clear the selected DMA interrupt pending bits */ - DMA1->IFCR = DMA_IT; - } -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_exti.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_exti.c deleted file mode 100755 index 52dd587..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_exti.c +++ /dev/null @@ -1,219 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_exti.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the EXTI firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_exti.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define EXTI_LineNone ((u32)0x00000) /* No interrupt selected */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : EXTI_DeInit -* Description : Deinitializes the EXTI peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_DeInit(void) -{ - EXTI->IMR = 0x00000000; - EXTI->EMR = 0x00000000; - EXTI->RTSR = 0x00000000; - EXTI->FTSR = 0x00000000; - EXTI->PR = 0x0007FFFF; -} - -/******************************************************************************* -* Function Name : EXTI_Init -* Description : Initializes the EXTI peripheral according to the specified -* parameters in the EXTI_InitStruct. -* Input : - EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure -* that contains the configuration information for the EXTI -* peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) -{ - /* Check the parameters */ - assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); - assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); - assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); - assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); - - if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) - { - /* Clear EXTI line configuration */ - EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; - - *(vu32 *)(EXTI_BASE + (u32)EXTI_InitStruct->EXTI_Mode)|= EXTI_InitStruct->EXTI_Line; - - /* Clear Rising Falling edge configuration */ - EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; - - /* Select the trigger for the selected external interrupts */ - if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) - { - /* Rising Falling edge */ - EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; - EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; - } - else - { - *(vu32 *)(EXTI_BASE + (u32)EXTI_InitStruct->EXTI_Trigger)|= EXTI_InitStruct->EXTI_Line; - } - } - else - { - /* Disable the selected external lines */ - *(vu32 *)(EXTI_BASE + (u32)EXTI_InitStruct->EXTI_Mode)&= ~EXTI_InitStruct->EXTI_Line; - } -} - -/******************************************************************************* -* Function Name : EXTI_StructInit -* Description : Fills each EXTI_InitStruct member with its reset value. -* Input : - EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) -{ - EXTI_InitStruct->EXTI_Line = EXTI_LineNone; - EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStruct->EXTI_LineCmd = DISABLE; -} - -/******************************************************************************* -* Function Name : EXTI_GenerateSWInterrupt -* Description : Generates a Software interrupt. -* Input : - EXTI_Line: specifies the EXTI lines to be enabled or -* disabled. -* This parameter can be any combination of EXTI_Linex where -* x can be (0..18). -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_GenerateSWInterrupt(u32 EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->SWIER |= EXTI_Line; -} - -/******************************************************************************* -* Function Name : EXTI_GetFlagStatus -* Description : Checks whether the specified EXTI line flag is set or not. -* Input : - EXTI_Line: specifies the EXTI line flag to check. -* This parameter can be: -* - EXTI_Linex: External interrupt line x where x(0..18) -* Output : None -* Return : The new state of EXTI_Line (SET or RESET). -*******************************************************************************/ -FlagStatus EXTI_GetFlagStatus(u32 EXTI_Line) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - if ((EXTI->PR & EXTI_Line) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : EXTI_ClearFlag -* Description : Clears the EXTI’s line pending flags. -* Input : - EXTI_Line: specifies the EXTI lines flags to clear. -* This parameter can be any combination of EXTI_Linex where -* x can be (0..18). -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_ClearFlag(u32 EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/******************************************************************************* -* Function Name : EXTI_GetITStatus -* Description : Checks whether the specified EXTI line is asserted or not. -* Input : - EXTI_Line: specifies the EXTI line to check. -* This parameter can be: -* - EXTI_Linex: External interrupt line x where x(0..18) -* Output : None -* Return : The new state of EXTI_Line (SET or RESET). -*******************************************************************************/ -ITStatus EXTI_GetITStatus(u32 EXTI_Line) -{ - ITStatus bitstatus = RESET; - u32 enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - enablestatus = EXTI->IMR & EXTI_Line; - - if (((EXTI->PR & EXTI_Line) != (u32)RESET) && (enablestatus != (u32)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : EXTI_ClearITPendingBit -* Description : Clears the EXTI’s line pending bits. -* Input : - EXTI_Line: specifies the EXTI lines to clear. -* This parameter can be any combination of EXTI_Linex where -* x can be (0..18). -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_ClearITPendingBit(u32 EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_flash.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_flash.c deleted file mode 100755 index 795e008..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_flash.c +++ /dev/null @@ -1,920 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_flash.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the FLASH firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_flash.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Flash Access Control Register bits */ -#define ACR_LATENCY_Mask ((u32)0x00000038) -#define ACR_HLFCYA_Mask ((u32)0xFFFFFFF7) -#define ACR_PRFTBE_Mask ((u32)0xFFFFFFEF) - -#ifdef _FLASH_PROG -/* Flash Access Control Register bits */ -#define ACR_PRFTBS_Mask ((u32)0x00000020) - -/* Flash Control Register bits */ -#define CR_PG_Set ((u32)0x00000001) -#define CR_PG_Reset ((u32)0x00001FFE) - -#define CR_PER_Set ((u32)0x00000002) -#define CR_PER_Reset ((u32)0x00001FFD) - -#define CR_MER_Set ((u32)0x00000004) -#define CR_MER_Reset ((u32)0x00001FFB) - -#define CR_OPTPG_Set ((u32)0x00000010) -#define CR_OPTPG_Reset ((u32)0x00001FEF) - -#define CR_OPTER_Set ((u32)0x00000020) -#define CR_OPTER_Reset ((u32)0x00001FDF) - -#define CR_STRT_Set ((u32)0x00000040) - -#define CR_LOCK_Set ((u32)0x00000080) - -/* FLASH Mask */ -#define RDPRT_Mask ((u32)0x00000002) -#define WRP0_Mask ((u32)0x000000FF) -#define WRP1_Mask ((u32)0x0000FF00) -#define WRP2_Mask ((u32)0x00FF0000) -#define WRP3_Mask ((u32)0xFF000000) - -/* FLASH Keys */ -#define RDP_Key ((u16)0x00A5) -#define FLASH_KEY1 ((u32)0x45670123) -#define FLASH_KEY2 ((u32)0xCDEF89AB) - -/* Delay definition */ -#define EraseTimeout ((u32)0x00000FFF) -#define ProgramTimeout ((u32)0x0000000F) -#endif - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -#ifdef _FLASH_PROG -static void delay(void); -#endif - -/* Private functions ---------------------------------------------------------*/ -/******************************************************************************* -* Function Name : FLASH_SetLatency -* Description : Sets the code latency value. -* Input : - FLASH_Latency: specifies the FLASH Latency value. -* This parameter can be one of the following values: -* - FLASH_Latency_0: FLASH Zero Latency cycle -* - FLASH_Latency_1: FLASH One Latency cycle -* - FLASH_Latency_2: FLASH Two Latency cycles -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_SetLatency(u32 FLASH_Latency) -{ - /* Check the parameters */ - assert_param(IS_FLASH_LATENCY(FLASH_Latency)); - - /* Sets the Latency value */ - FLASH->ACR &= ACR_LATENCY_Mask; - FLASH->ACR |= FLASH_Latency; -} - -/******************************************************************************* -* Function Name : FLASH_HalfCycleAccessCmd -* Description : Enables or disables the Half cycle flash access. -* Input : - FLASH_HalfCycle: specifies the FLASH Half cycle Access mode. -* This parameter can be one of the following values: -* - FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable -* - FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_HalfCycleAccessCmd(u32 FLASH_HalfCycleAccess) -{ - /* Check the parameters */ - assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess)); - - /* Enable or disable the Half cycle access */ - FLASH->ACR &= ACR_HLFCYA_Mask; - FLASH->ACR |= FLASH_HalfCycleAccess; -} - -void test(u32 x) { - int x; - int y; - x = 1; - y = x; -} - -/******************************************************************************* -* Function Name : FLASH_PrefetchBufferCmd -* Description : Enables or disables the Prefetch Buffer. -* Input : - FLASH_PrefetchBuffer: specifies the Prefetch buffer status. -* This parameter can be one of the following values: -* - FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable -* - FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_PrefetchBufferCmd(u32 FLASH_PrefetchBuffer) -{ - /* Check the parameters */ - assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); - assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); - assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); - - /* Enable or disable the Prefetch Buffer */ - FLASH->ACR &= ACR_PRFTBE_Mask; - FLASH->ACR |= FLASH_PrefetchBuffer; -} - -#ifdef _FLASH_PROG -/******************************************************************************* -* Function Name : FLASH_Unlock -* Description : Unlocks the FLASH Program Erase Controller. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_Unlock(void) -{ - /* Authorize the FPEC Access */ - FLASH->KEYR = FLASH_KEY1; - FLASH->KEYR = FLASH_KEY2; -} - -/******************************************************************************* -* Function Name : FLASH_Lock -* Description : Locks the FLASH Program Erase Controller. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_Lock(void) -{ - /* Set the Lock Bit to lock the FPEC and the FCR */ - FLASH->CR |= CR_LOCK_Set; -} - -/******************************************************************************* -* Function Name : FLASH_ErasePage -* Description : Erases a specified FLASH page. -* Input : - Page_Address: The page address to be erased. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ErasePage(u32 Page_Address) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Page_Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase the page */ - FLASH->CR|= CR_PER_Set; - FLASH->AR = Page_Address; - FLASH->CR|= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status != FLASH_BUSY) - { - /* if the erase operation is completed, disable the PER Bit */ - FLASH->CR &= CR_PER_Reset; - } - } - /* Return the Erase Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_EraseAllPages -* Description : Erases all FLASH pages. -* Input : None -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_EraseAllPages(void) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all pages */ - FLASH->CR |= CR_MER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status != FLASH_BUSY) - { - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= CR_MER_Reset; - } - } - /* Return the Erase Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_EraseOptionBytes -* Description : Erases the FLASH option bytes. -* Input : None -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_EraseOptionBytes(void) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* if the previous operation is completed, proceed to erase the option bytes */ - FLASH->CR |= CR_OPTER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the erase operation is completed, disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - - /* Enable the readout access */ - OB->RDP= RDP_Key; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - else - { - if (status != FLASH_BUSY) - { - /* Disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - } - /* Return the erase status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_ProgramWord -* Description : Programs a word at a specified address. -* Input : - Address: specifies the address to be programmed. -* - Data: specifies the data to be programmed. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ProgramWord(u32 Address, u32 Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new first - half word */ - FLASH->CR |= CR_PG_Set; - - *(vu16*)Address = (u16)Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new second - half word */ - *(vu16*)(Address + 2) = Data >> 16; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - else - { - if (status != FLASH_BUSY) - { - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - } - /* Return the Program Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_ProgramHalfWord -* Description : Programs a half word at a specified address. -* Input : - Address: specifies the address to be programmed. -* - Data: specifies the data to be programmed. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ProgramHalfWord(u32 Address, u16 Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR |= CR_PG_Set; - - *(vu16*)Address = Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - /* Return the Program Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_ProgramOptionByteData -* Description : Programs a half word at a specified Option Byte Data address. -* Input : - Address: specifies the address to be programmed. -* This parameter can be 0x1FFFF804 or 0x1FFFF806. -* - Data: specifies the data to be programmed. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ProgramOptionByteData(u32 Address, u8 Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_DATA_ADDRESS(Address)); - - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* Enables the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - *(vu16*)Address = Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the Option Byte Data Program Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_EnableWriteProtection -* Description : Write protects the desired pages -* Input : - FLASH_Pages: specifies the address of the pages to be -* write protected. This parameter can be: -* - For STM32F10Xxx Medium-density devices (FLASH page size equal to 1 KB) -* - A value between FLASH_WRProt_Pages0to3 and -* FLASH_WRProt_Pages124to127 -* - For STM32F10Xxx High-density devices (FLASH page size equal to 2 KB) -* - A value between FLASH_WRProt_Pages0to1 and -* FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255 -* - FLASH_WRProt_AllPages -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_EnableWriteProtection(u32 FLASH_Pages) -{ - u16 WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; - - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages)); - - FLASH_Pages = (u32)(~FLASH_Pages); - WRP0_Data = (vu16)(FLASH_Pages & WRP0_Mask); - WRP1_Data = (vu16)((FLASH_Pages & WRP1_Mask) >> 8); - WRP2_Data = (vu16)((FLASH_Pages & WRP2_Mask) >> 16); - WRP3_Data = (vu16)((FLASH_Pages & WRP3_Mask) >> 24); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorizes the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - FLASH->CR |= CR_OPTPG_Set; - - if(WRP0_Data != 0xFF) - { - OB->WRP0 = WRP0_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) - { - OB->WRP1 = WRP1_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) - { - OB->WRP2 = WRP2_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF)) - { - OB->WRP3 = WRP3_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the write protection operation Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_ReadOutProtection -* Description : Enables or disables the read out protection. -* If the user has already programmed the other option bytes before -* calling this function, he must re-program them since this -* function erases all option bytes. -* Input : - Newstate: new state of the ReadOut Protection. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorizes the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - FLASH->CR |= CR_OPTER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the erase operation is completed, disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - - if(NewState != DISABLE) - { - OB->RDP = 0x00; - } - else - { - OB->RDP = RDP_Key; - } - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - else - { - if(status != FLASH_BUSY) - { - /* Disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - } - } - } - /* Return the protection operation Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_UserOptionByteConfig -* Description : Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / -* RST_STDBY. -* Input : - OB_IWDG: Selects the IWDG mode -* This parameter can be one of the following values: -* - OB_IWDG_SW: Software IWDG selected -* - OB_IWDG_HW: Hardware IWDG selected -* - OB_STOP: Reset event when entering STOP mode. -* This parameter can be one of the following values: -* - OB_STOP_NoRST: No reset generated when entering in STOP -* - OB_STOP_RST: Reset generated when entering in STOP -* - OB_STDBY: Reset event when entering Standby mode. -* This parameter can be one of the following values: -* - OB_STDBY_NoRST: No reset generated when entering in STANDBY -* - OB_STDBY_RST: Reset generated when entering in STANDBY -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_UserOptionByteConfig(u16 OB_IWDG, u16 OB_STOP, u16 OB_STDBY) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); - assert_param(IS_OB_STOP_SOURCE(OB_STOP)); - assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); - - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - - OB->USER = ( OB_IWDG | OB_STOP |OB_STDBY) | (u16)0xF8; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the Option Byte program Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_GetUserOptionByte -* Description : Returns the FLASH User Option Bytes values. -* Input : None -* Output : None -* Return : The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) -* and RST_STDBY(Bit2). -*******************************************************************************/ -u32 FLASH_GetUserOptionByte(void) -{ - /* Return the User Option Byte */ - return (u32)(FLASH->OBR >> 2); -} - -/******************************************************************************* -* Function Name : FLASH_GetWriteProtectionOptionByte -* Description : Returns the FLASH Write Protection Option Bytes Register value. -* Input : None -* Output : None -* Return : The FLASH Write Protection Option Bytes Register value -*******************************************************************************/ -u32 FLASH_GetWriteProtectionOptionByte(void) -{ - /* Return the Falsh write protection Register value */ - return (u32)(FLASH->WRPR); -} - -/******************************************************************************* -* Function Name : FLASH_GetReadOutProtectionStatus -* Description : Checks whether the FLASH Read Out Protection Status is set -* or not. -* Input : None -* Output : None -* Return : FLASH ReadOut Protection Status(SET or RESET) -*******************************************************************************/ -FlagStatus FLASH_GetReadOutProtectionStatus(void) -{ - FlagStatus readoutstatus = RESET; - - if ((FLASH->OBR & RDPRT_Mask) != (u32)RESET) - { - readoutstatus = SET; - } - else - { - readoutstatus = RESET; - } - return readoutstatus; -} - -/******************************************************************************* -* Function Name : FLASH_GetPrefetchBufferStatus -* Description : Checks whether the FLASH Prefetch Buffer status is set or not. -* Input : None -* Output : None -* Return : FLASH Prefetch Buffer Status (SET or RESET). -*******************************************************************************/ -FlagStatus FLASH_GetPrefetchBufferStatus(void) -{ - FlagStatus bitstatus = RESET; - - if ((FLASH->ACR & ACR_PRFTBS_Mask) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : FLASH_ITConfig -* Description : Enables or disables the specified FLASH interrupts. -* Input : - FLASH_IT: specifies the FLASH interrupt sources to be -* enabled or disabled. -* This parameter can be any combination of the following values: -* - FLASH_IT_ERROR: FLASH Error Interrupt -* - FLASH_IT_EOP: FLASH end of operation Interrupt -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_ITConfig(u16 FLASH_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FLASH_IT(FLASH_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if(NewState != DISABLE) - { - /* Enable the interrupt sources */ - FLASH->CR |= FLASH_IT; - } - else - { - /* Disable the interrupt sources */ - FLASH->CR &= ~(u32)FLASH_IT; - } -} - -/******************************************************************************* -* Function Name : FLASH_GetFlagStatus -* Description : Checks whether the specified FLASH flag is set or not. -* Input : - FLASH_FLAG: specifies the FLASH flag to check. -* This parameter can be one of the following values: -* - FLASH_FLAG_BSY: FLASH Busy flag -* - FLASH_FLAG_PGERR: FLASH Program error flag -* - FLASH_FLAG_WRPRTERR: FLASH Write protected error flag -* - FLASH_FLAG_EOP: FLASH End of Operation flag -* - FLASH_FLAG_OPTERR: FLASH Option Byte error flag -* Output : None -* Return : The new state of FLASH_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus FLASH_GetFlagStatus(u16 FLASH_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; - - if(FLASH_FLAG == FLASH_FLAG_OPTERR) - { - if((FLASH->OBR & FLASH_FLAG_OPTERR) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - else - { - if((FLASH->SR & FLASH_FLAG) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - /* Return the new state of FLASH_FLAG (SET or RESET) */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : FLASH_ClearFlag -* Description : Clears the FLASH’s pending flags. -* Input : - FLASH_FLAG: specifies the FLASH flags to clear. -* This parameter can be any combination of the following values: -* - FLASH_FLAG_BSY: FLASH Busy flag -* - FLASH_FLAG_PGERR: FLASH Program error flag -* - FLASH_FLAG_WRPRTERR: FLASH Write protected error flag -* - FLASH_FLAG_EOP: FLASH End of Operation flag -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_ClearFlag(u16 FLASH_FLAG) -{ - /* Check the parameters */ - assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; - - /* Clear the flags */ - FLASH->SR = FLASH_FLAG; -} - -/******************************************************************************* -* Function Name : FLASH_GetStatus -* Description : Returns the FLASH Status. -* Input : None -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP or FLASH_COMPLETE -*******************************************************************************/ -FLASH_Status FLASH_GetStatus(void) -{ - FLASH_Status flashstatus = FLASH_COMPLETE; - - if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) - { - flashstatus = FLASH_BUSY; - } - else - { - if(FLASH->SR & FLASH_FLAG_PGERR) - { - flashstatus = FLASH_ERROR_PG; - } - else - { - if(FLASH->SR & FLASH_FLAG_WRPRTERR) - { - flashstatus = FLASH_ERROR_WRP; - } - else - { - flashstatus = FLASH_COMPLETE; - } - } - } - /* Return the Flash Status */ - return flashstatus; -} - -/******************************************************************************* -* Function Name : FLASH_WaitForLastOperation -* Description : Waits for a Flash operation to complete or a TIMEOUT to occur. -* Input : - Timeout: FLASH progamming Timeout -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_WaitForLastOperation(u32 Timeout) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check for the Flash Status */ - status = FLASH_GetStatus(); - - /* Wait for a Flash operation to complete or a TIMEOUT to occur */ - while((status == FLASH_BUSY) && (Timeout != 0x00)) - { - delay(); - status = FLASH_GetStatus(); - Timeout--; - } - - if(Timeout == 0x00 ) - { - status = FLASH_TIMEOUT; - } - - /* Return the operation status */ - return status; -} - -/******************************************************************************* -* Function Name : delay -* Description : Inserts a time delay. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -static void delay(void) -{ - vu32 i = 0; - - for(i = 0xFF; i != 0; i--) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_fsmc.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_fsmc.c deleted file mode 100755 index b0114bf..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_fsmc.c +++ /dev/null @@ -1,861 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_fsmc.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the FSMC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_fsmc.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* --------------------- FSMC registers bit mask ---------------------------- */ -/* FSMC BCRx Mask */ -#define BCR_MBKEN_Set ((u32)0x00000001) -#define BCR_MBKEN_Reset ((u32)0x000FFFFE) -#define BCR_FACCEN_Set ((u32)0x00000040) - -/* FSMC PCRx Mask */ -#define PCR_PBKEN_Set ((u32)0x00000004) -#define PCR_PBKEN_Reset ((u32)0x000FFFFB) -#define PCR_ECCEN_Set ((u32)0x00000040) -#define PCR_ECCEN_Reset ((u32)0x000FFFBF) -#define PCR_MemoryType_NAND ((u32)0x00000008) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : FSMC_NORSRAMDeInit -* Description : Deinitializes the FSMC NOR/SRAM Banks registers to their default -* reset values. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 -* - FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 -* - FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 -* - FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NORSRAMDeInit(u32 FSMC_Bank) -{ - /* Check the parameter */ - assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); - - /* FSMC_Bank1_NORSRAM1 */ - if(FSMC_Bank == FSMC_Bank1_NORSRAM1) - { - FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB; - } - /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */ - else - { - FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; - } - - FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF; - FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF; -} - -/******************************************************************************* -* Function Name : FSMC_NANDDeInit -* Description : Deinitializes the FSMC NAND Banks registers to their default -* reset values. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDDeInit(u32 FSMC_Bank) -{ - /* Check the parameter */ - assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - /* Set the FSMC_Bank2 registers to their reset values */ - FSMC_Bank2->PCR2 = 0x00000018; - FSMC_Bank2->SR2 = 0x00000040; - FSMC_Bank2->PMEM2 = 0xFCFCFCFC; - FSMC_Bank2->PATT2 = 0xFCFCFCFC; - } - /* FSMC_Bank3_NAND */ - else - { - /* Set the FSMC_Bank3 registers to their reset values */ - FSMC_Bank3->PCR3 = 0x00000018; - FSMC_Bank3->SR3 = 0x00000040; - FSMC_Bank3->PMEM3 = 0xFCFCFCFC; - FSMC_Bank3->PATT3 = 0xFCFCFCFC; - } -} - -/******************************************************************************* -* Function Name : FSMC_PCCARDDeInit -* Description : Deinitializes the FSMC PCCARD Bank registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_PCCARDDeInit(void) -{ - /* Set the FSMC_Bank4 registers to their reset values */ - FSMC_Bank4->PCR4 = 0x00000018; - FSMC_Bank4->SR4 = 0x00000000; - FSMC_Bank4->PMEM4 = 0xFCFCFCFC; - FSMC_Bank4->PATT4 = 0xFCFCFCFC; - FSMC_Bank4->PIO4 = 0xFCFCFCFC; -} - -/******************************************************************************* -* Function Name : FSMC_NORSRAMInit -* Description : Initializes the FSMC NOR/SRAM Banks according to the -* specified parameters in the FSMC_NORSRAMInitStruct. -* Input : - FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef -* structure that contains the configuration information for -* the FSMC NOR/SRAM specified Banks. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) -{ - /* Check the parameters */ - assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank)); - assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux)); - assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType)); - assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth)); - assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode)); - assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity)); - assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode)); - assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive)); - assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation)); - assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal)); - assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode)); - assert_param(IS_FSMC_ASYNC_WAIT(FSMC_NORSRAMInitStruct->FSMC_AsyncWait)); - assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst)); - assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime)); - assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime)); - assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime)); - assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration)); - assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision)); - assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency)); - assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); - - /* Bank1 NOR/SRAM control register configuration */ - FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = - (u32)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux | - FSMC_NORSRAMInitStruct->FSMC_MemoryType | - FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth | - FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode | - FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity | - FSMC_NORSRAMInitStruct->FSMC_WrapMode | - FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive | - FSMC_NORSRAMInitStruct->FSMC_WriteOperation | - FSMC_NORSRAMInitStruct->FSMC_WaitSignal | - FSMC_NORSRAMInitStruct->FSMC_ExtendedMode | - FSMC_NORSRAMInitStruct->FSMC_AsyncWait | - FSMC_NORSRAMInitStruct->FSMC_WriteBurst; - - if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR) - { - FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (u32)BCR_FACCEN_Set; - } - - /* Bank1 NOR/SRAM timing register configuration */ - FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = - (u32)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) | - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode; - - - - /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */ - if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable) - { - assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime)); - assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime)); - assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime)); - assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration)); - assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision)); - assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency)); - assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode)); - - FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = - (u32)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )| - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) | - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode; - } - else - { - FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF; - } -} - -/******************************************************************************* -* Function Name : FSMC_NANDInit -* Description : Initializes the FSMC NAND Banks according to the specified -* parameters in the FSMC_NANDInitStruct. -* Input : - FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef -* structure that contains the configuration information for -* the FSMC NAND specified Banks. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) -{ - u32 tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; - - /* Check the parameters */ - assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank)); - assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature)); - assert_param( IS_FSMC_DATA_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth)); - assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC)); - assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize)); - assert_param( IS_FSMC_ADDRESS_LOW_MAPPING(FSMC_NANDInitStruct->FSMC_AddressLowMapping)); - assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime)); - assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); - - /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */ - tmppcr = (u32)FSMC_NANDInitStruct->FSMC_Waitfeature | - PCR_MemoryType_NAND | - FSMC_NANDInitStruct->FSMC_MemoryDataWidth | - FSMC_NANDInitStruct->FSMC_ECC | - FSMC_NANDInitStruct->FSMC_ECCPageSize | - FSMC_NANDInitStruct->FSMC_AddressLowMapping | - (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )| - (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13); - - /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */ - tmppmem = (u32)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | - (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */ - tmppatt = (u32)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | - (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND) - { - /* FSMC_Bank2_NAND registers configuration */ - FSMC_Bank2->PCR2 = tmppcr; - FSMC_Bank2->PMEM2 = tmppmem; - FSMC_Bank2->PATT2 = tmppatt; - } - else - { - /* FSMC_Bank3_NAND registers configuration */ - FSMC_Bank3->PCR3 = tmppcr; - FSMC_Bank3->PMEM3 = tmppmem; - FSMC_Bank3->PATT3 = tmppatt; - } -} - -/******************************************************************************* -* Function Name : FSMC_PCCARDInit -* Description : Initializes the FSMC PCCARD Bank according to the specified -* parameters in the FSMC_PCCARDInitStruct. -* Input : - FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef -* structure that contains the configuration information for -* the FSMC PCCARD Bank. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) -{ - /* Check the parameters */ - assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature)); - assert_param(IS_FSMC_ADDRESS_LOW_MAPPING(FSMC_PCCARDInitStruct->FSMC_AddressLowMapping)); - assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime)); - assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime)); - - - assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime)); - - /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */ - FSMC_Bank4->PCR4 = (u32)FSMC_PCCARDInitStruct->FSMC_Waitfeature | - FSMC_PCCARDInitStruct->FSMC_AddressLowMapping | - (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) | - (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13); - - /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */ - FSMC_Bank4->PMEM4 = (u32)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | - (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */ - FSMC_Bank4->PATT4 = (u32)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | - (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */ - FSMC_Bank4->PIO4 = (u32)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime | - (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24); -} - -/******************************************************************************* -* Function Name : FSMC_NORSRAMStructInit -* Description : Fills each FSMC_NORSRAMInitStruct member with its default value. -* Input : - FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) -{ - /* Reset NOR/SRAM Init structure parameters values */ - FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1; - FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable; - FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM; - FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; - FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; - FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; - FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable; - FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; - FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable; - FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable; - FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; - FSMC_NORSRAMInitStruct->FSMC_AsyncWait = FSMC_AsyncWait_Disable; - FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; -} - -/******************************************************************************* -* Function Name : FSMC_NANDStructInit -* Description : Fills each FSMC_NANDInitStruct member with its default value. -* Input : - FSMC_NORSRAMInitStruct: pointer to a FSMC_NANDInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) -{ - /* Reset NAND Init structure parameters values */ - FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND; - FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; - FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; - FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable; - FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes; - FSMC_NANDInitStruct->FSMC_AddressLowMapping = FSMC_AddressLowMapping_Direct; - FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0; - FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; -} - -/******************************************************************************* -* Function Name : FSMC_PCCARDStructInit -* Description : Fills each FSMC_PCCARDInitStruct member with its default value. -* Input : - FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) -{ - /* Reset PCCARD Init structure parameters values */ - FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; - FSMC_PCCARDInitStruct->FSMC_AddressLowMapping = FSMC_AddressLowMapping_Direct; - FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0; - FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; -} - -/******************************************************************************* -* Function Name : FSMC_NORSRAMCmd -* Description : Enables or disables the specified NOR/SRAM Memory Bank. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 -* - FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 -* - FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 -* - FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 -* : - NewState: new state of the FSMC_Bank. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NORSRAMCmd(u32 FSMC_Bank, FunctionalState NewState) -{ - assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */ - FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set; - } - else - { - /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */ - FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset; - } -} - -/******************************************************************************* -* Function Name : FSMC_NANDCmd -* Description : Enables or disables the specified NAND Memory Bank. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* : - NewState: new state of the FSMC_Bank. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDCmd(u32 FSMC_Bank, FunctionalState NewState) -{ - assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 |= PCR_PBKEN_Set; - } - else - { - FSMC_Bank3->PCR3 |= PCR_PBKEN_Set; - } - } - else - { - /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset; - } - else - { - FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset; - } - } -} - -/******************************************************************************* -* Function Name : FSMC_PCCARDCmd -* Description : Enables or disables the PCCARD Memory Bank. -* Input : - NewState: new state of the PCCARD Memory Bank. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_PCCARDCmd(FunctionalState NewState) -{ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */ - FSMC_Bank4->PCR4 |= PCR_PBKEN_Set; - } - else - { - /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */ - FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset; - } -} - -/******************************************************************************* -* Function Name : FSMC_NANDECCCmd -* Description : Enables or disables the FSMC NAND ECC feature. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* : - NewState: new state of the FSMC NAND ECC feature. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDECCCmd(u32 FSMC_Bank, FunctionalState NewState) -{ - assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 |= PCR_ECCEN_Set; - } - else - { - FSMC_Bank3->PCR3 |= PCR_ECCEN_Set; - } - } - else - { - /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset; - } - else - { - FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset; - } - } -} - -/******************************************************************************* -* Function Name : FSMC_GetECC -* Description : Returns the error correction code register value. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* Output : None -* Return : The Error Correction Code (ECC) value. -*******************************************************************************/ -u32 FSMC_GetECC(u32 FSMC_Bank) -{ - u32 eccval = 0x00000000; - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - /* Get the ECCR2 register value */ - eccval = FSMC_Bank2->ECCR2; - } - else - { - /* Get the ECCR3 register value */ - eccval = FSMC_Bank3->ECCR3; - } - /* Return the error correction code value */ - return(eccval); -} - -/******************************************************************************* -* Function Name : FSMC_ITConfig -* Description : Enables or disables the specified FSMC interrupts. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_IT: specifies the FSMC interrupt sources to be -* enabled or disabled. -* This parameter can be any combination of the following values: -* - FSMC_IT_RisingEdge: Rising edge detection interrupt. -* - FSMC_IT_Level: Level edge detection interrupt. -* - FSMC_IT_FallingEdge: Falling edge detection interrupt. -* - NewState: new state of the specified FSMC interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_ITConfig(u32 FSMC_Bank, u32 FSMC_IT, FunctionalState NewState) -{ - assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); - assert_param(IS_FSMC_IT(FSMC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected FSMC_Bank2 interrupts */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->SR2 |= FSMC_IT; - } - /* Enable the selected FSMC_Bank3 interrupts */ - else if (FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 |= FSMC_IT; - } - /* Enable the selected FSMC_Bank4 interrupts */ - else - { - FSMC_Bank4->SR4 |= FSMC_IT; - } - } - else - { - /* Disable the selected FSMC_Bank2 interrupts */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - - FSMC_Bank2->SR2 &= (u32)~FSMC_IT; - } - /* Disable the selected FSMC_Bank3 interrupts */ - else if (FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 &= (u32)~FSMC_IT; - } - /* Disable the selected FSMC_Bank4 interrupts */ - else - { - FSMC_Bank4->SR4 &= (u32)~FSMC_IT; - } - } -} - -/******************************************************************************* -* Function Name : FSMC_GetFlagStatus -* Description : Checks whether the specified FSMC flag is set or not. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - FSMC_FLAG_RisingEdge: Rising egde detection Flag. -* - FSMC_FLAG_Level: Level detection Flag. -* - FSMC_FLAG_FallingEdge: Falling egde detection Flag. -* - FSMC_FLAG_FEMPT: Fifo empty Flag. -* Output : None -* Return : The new state of FSMC_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus FSMC_GetFlagStatus(u32 FSMC_Bank, u32 FSMC_FLAG) -{ - FlagStatus bitstatus = RESET; - u32 tmpsr = 0x00000000; - - /* Check the parameters */ - assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); - assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - tmpsr = FSMC_Bank2->SR2; - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - tmpsr = FSMC_Bank3->SR3; - } - /* FSMC_Bank4_PCCARD*/ - else - { - tmpsr = FSMC_Bank4->SR4; - } - - /* Get the flag status */ - if ((tmpsr & FSMC_FLAG) != (u16)RESET ) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the flag status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : FSMC_ClearFlag -* Description : Clears the FSMC’s pending flags. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_FLAG: specifies the flag to clear. -* This parameter can be any combination of the following values: -* - FSMC_FLAG_RisingEdge: Rising egde detection Flag. -* - FSMC_FLAG_Level: Level detection Flag. -* - FSMC_FLAG_FallingEdge: Falling egde detection Flag. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_ClearFlag(u32 FSMC_Bank, u32 FSMC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); - assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ; - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->SR2 &= ~FSMC_FLAG; - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 &= ~FSMC_FLAG; - } - /* FSMC_Bank4_PCCARD*/ - else - { - FSMC_Bank4->SR4 &= ~FSMC_FLAG; - } -} - -/******************************************************************************* -* Function Name : FSMC_GetITStatus -* Description : Checks whether the specified FSMC interrupt has occurred or not. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_IT: specifies the FSMC interrupt source to check. -* This parameter can be one of the following values: -* - FSMC_IT_RisingEdge: Rising edge detection interrupt. -* - FSMC_IT_Level: Level edge detection interrupt. -* - FSMC_IT_FallingEdge: Falling edge detection interrupt. -* Output : None -* Return : The new state of FSMC_IT (SET or RESET). -*******************************************************************************/ -ITStatus FSMC_GetITStatus(u32 FSMC_Bank, u32 FSMC_IT) -{ - ITStatus bitstatus = RESET; - u32 tmpsr = 0x0, itstatus = 0x0, itenable = 0x0; - - /* Check the parameters */ - assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); - assert_param(IS_FSMC_GET_IT(FSMC_IT)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - tmpsr = FSMC_Bank2->SR2; - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - tmpsr = FSMC_Bank3->SR3; - } - /* FSMC_Bank4_PCCARD*/ - else - { - tmpsr = FSMC_Bank4->SR4; - } - - itstatus = tmpsr & FSMC_IT; - - itenable = tmpsr & (FSMC_IT >> 3); - - if ((itstatus != (u32)RESET) && (itenable != (u32)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : FSMC_ClearITPendingBit -* Description : Clears the FSMC’s interrupt pending bits. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_IT: specifies the interrupt pending bit to clear. -* This parameter can be any combination of the following values: -* - FSMC_IT_RisingEdge: Rising edge detection interrupt. -* - FSMC_IT_Level: Level edge detection interrupt. -* - FSMC_IT_FallingEdge: Falling edge detection interrupt. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_ClearITPendingBit(u32 FSMC_Bank, u32 FSMC_IT) -{ - /* Check the parameters */ - assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); - assert_param(IS_FSMC_IT(FSMC_IT)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3); - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3); - } - /* FSMC_Bank4_PCCARD*/ - else - { - FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3); - } -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_gpio.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_gpio.c deleted file mode 100755 index 9fbcd16..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_gpio.c +++ /dev/null @@ -1,580 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_gpio.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the GPIO firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_gpio.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ------------ RCC registers bit address in the alias region ----------- */ -#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE) - -/* --- EVENTCR Register ---*/ -/* Alias word address of EVOE bit */ -#define EVCR_OFFSET (AFIO_OFFSET + 0x00) -#define EVOE_BitNumber ((u8)0x07) -#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4)) - -#define EVCR_PORTPINCONFIG_MASK ((u16)0xFF80) -#define LSB_MASK ((u16)0xFFFF) -#define DBGAFR_POSITION_MASK ((u32)0x000F0000) -#define DBGAFR_SWJCFG_MASK ((u32)0xF0FFFFFF) -#define DBGAFR_LOCATION_MASK ((u32)0x00200000) -#define DBGAFR_NUMBITS_MASK ((u32)0x00100000) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : GPIO_DeInit -* Description : Deinitializes the GPIOx peripheral registers to their default -* reset values. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_DeInit(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - switch (*(u32*)&GPIOx) - { - case GPIOA_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE); - break; - - case GPIOB_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE); - break; - - case GPIOC_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE); - break; - - case GPIOD_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE); - break; - - case GPIOE_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE); - break; - - case GPIOF_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE); - break; - - case GPIOG_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : GPIO_AFIODeInit -* Description : Deinitializes the Alternate Functions (remap, event control -* and EXTI configuration) registers to their default reset -* values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_AFIODeInit(void) -{ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Init -* Description : Initializes the GPIOx peripheral according to the specified -* parameters in the GPIO_InitStruct. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that -* contains the configuration information for the specified GPIO -* peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) -{ - u32 currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00; - u32 tmpreg = 0x00, pinmask = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); - assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); - -/*---------------------------- GPIO Mode Configuration -----------------------*/ - currentmode = ((u32)GPIO_InitStruct->GPIO_Mode) & ((u32)0x0F); - - if ((((u32)GPIO_InitStruct->GPIO_Mode) & ((u32)0x10)) != 0x00) - { - /* Check the parameters */ - assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); - /* Output mode */ - currentmode |= (u32)GPIO_InitStruct->GPIO_Speed; - } - -/*---------------------------- GPIO CRL Configuration ------------------------*/ - /* Configure the eight low port pins */ - if (((u32)GPIO_InitStruct->GPIO_Pin & ((u32)0x00FF)) != 0x00) - { - tmpreg = GPIOx->CRL; - - for (pinpos = 0x00; pinpos < 0x08; pinpos++) - { - pos = ((u32)0x01) << pinpos; - /* Get the port pins position */ - currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; - - if (currentpin == pos) - { - pos = pinpos << 2; - /* Clear the corresponding low control register bits */ - pinmask = ((u32)0x0F) << pos; - tmpreg &= ~pinmask; - - /* Write the mode configuration in the corresponding bits */ - tmpreg |= (currentmode << pos); - - /* Reset the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) - { - GPIOx->BRR = (((u32)0x01) << pinpos); - } - /* Set the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) - { - GPIOx->BSRR = (((u32)0x01) << pinpos); - } - } - } - GPIOx->CRL = tmpreg; - } - -/*---------------------------- GPIO CRH Configuration ------------------------*/ - /* Configure the eight high port pins */ - if (GPIO_InitStruct->GPIO_Pin > 0x00FF) - { - tmpreg = GPIOx->CRH; - for (pinpos = 0x00; pinpos < 0x08; pinpos++) - { - pos = (((u32)0x01) << (pinpos + 0x08)); - /* Get the port pins position */ - currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos); - if (currentpin == pos) - { - pos = pinpos << 2; - /* Clear the corresponding high control register bits */ - pinmask = ((u32)0x0F) << pos; - tmpreg &= ~pinmask; - - /* Write the mode configuration in the corresponding bits */ - tmpreg |= (currentmode << pos); - - /* Reset the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) - { - GPIOx->BRR = (((u32)0x01) << (pinpos + 0x08)); - } - /* Set the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) - { - GPIOx->BSRR = (((u32)0x01) << (pinpos + 0x08)); - } - } - } - GPIOx->CRH = tmpreg; - } -} - -/******************************************************************************* -* Function Name : GPIO_StructInit -* Description : Fills each GPIO_InitStruct member with its default value. -* Input : - GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) -{ - /* Reset GPIO init structure parameters values */ - GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; - GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING; -} - -/******************************************************************************* -* Function Name : GPIO_ReadInputDataBit -* Description : Reads the specified input port pin. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* : - GPIO_Pin: specifies the port bit to read. -* This parameter can be GPIO_Pin_x where x can be (0..15). -* Output : None -* Return : The input port pin value. -*******************************************************************************/ -u8 GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - u8 bitstatus = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->IDR & GPIO_Pin) != (u32)Bit_RESET) - { - bitstatus = (u8)Bit_SET; - } - else - { - bitstatus = (u8)Bit_RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : GPIO_ReadInputData -* Description : Reads the specified GPIO input data port. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* Output : None -* Return : GPIO input data port value. -*******************************************************************************/ -u16 GPIO_ReadInputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((u16)GPIOx->IDR); -} - -/******************************************************************************* -* Function Name : GPIO_ReadOutputDataBit -* Description : Reads the specified output data port bit. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* : - GPIO_Pin: specifies the port bit to read. -* This parameter can be GPIO_Pin_x where x can be (0..15). -* Output : None -* Return : The output port pin value. -*******************************************************************************/ -u8 GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - u8 bitstatus = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->ODR & GPIO_Pin) != (u32)Bit_RESET) - { - bitstatus = (u8)Bit_SET; - } - else - { - bitstatus = (u8)Bit_RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : GPIO_ReadOutputData -* Description : Reads the specified GPIO output data port. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* Output : None -* Return : GPIO output data port value. -*******************************************************************************/ -u16 GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((u16)GPIOx->ODR); -} - -/******************************************************************************* -* Function Name : GPIO_SetBits -* Description : Sets the selected data port bits. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_Pin: specifies the port bits to be written. -* This parameter can be any combination of GPIO_Pin_x where -* x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_SetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BSRR = GPIO_Pin; -} - -/******************************************************************************* -* Function Name : GPIO_ResetBits -* Description : Clears the selected data port bits. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_Pin: specifies the port bits to be written. -* This parameter can be any combination of GPIO_Pin_x where -* x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BRR = GPIO_Pin; -} - -/******************************************************************************* -* Function Name : GPIO_WriteBit -* Description : Sets or clears the selected data port bit. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_Pin: specifies the port bit to be written. -* This parameter can be one of GPIO_Pin_x where x can be (0..15). -* - BitVal: specifies the value to be written to the selected bit. -* This parameter can be one of the BitAction enum values: -* - Bit_RESET: to clear the port pin -* - Bit_SET: to set the port pin -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin, BitAction BitVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_BIT_ACTION(BitVal)); - - if (BitVal != Bit_RESET) - { - GPIOx->BSRR = GPIO_Pin; - } - else - { - GPIOx->BRR = GPIO_Pin; - } -} - -/******************************************************************************* -* Function Name : GPIO_Write -* Description : Writes data to the specified GPIO data port. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - PortVal: specifies the value to be written to the port output -* data register. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Write(GPIO_TypeDef* GPIOx, u16 PortVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - GPIOx->ODR = PortVal; -} - -/******************************************************************************* -* Function Name : GPIO_PinLockConfig -* Description : Locks GPIO Pins configuration registers. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_Pin: specifies the port bit to be written. -* This parameter can be any combination of GPIO_Pin_x where -* x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - u32 tmp = 0x00010000; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - tmp |= GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Reset LCKK bit */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; -} - -/******************************************************************************* -* Function Name : GPIO_EventOutputConfig -* Description : Selects the GPIO pin used as Event output. -* Input : - GPIO_PortSource: selects the GPIO port to be used as source -* for Event output. -* This parameter can be GPIO_PortSourceGPIOx where x can be -* (A..E). -* - GPIO_PinSource: specifies the pin for the Event output. -* This parameter can be GPIO_PinSourcex where x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_EventOutputConfig(u8 GPIO_PortSource, u8 GPIO_PinSource) -{ - u32 tmpreg = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource)); - assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); - - tmpreg = AFIO->EVCR; - /* Clear the PORT[6:4] and PIN[3:0] bits */ - tmpreg &= EVCR_PORTPINCONFIG_MASK; - tmpreg |= (u32)GPIO_PortSource << 0x04; - tmpreg |= GPIO_PinSource; - - AFIO->EVCR = tmpreg; -} - -/******************************************************************************* -* Function Name : GPIO_EventOutputCmd -* Description : Enables or disables the Event Output. -* Input : - NewState: new state of the Event output. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_EventOutputCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) EVCR_EVOE_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : GPIO_PinRemapConfig -* Description : Changes the mapping of the specified pin. -* Input : - GPIO_Remap: selects the pin to remap. -* This parameter can be one of the following values: -* - GPIO_Remap_SPI1 -* - GPIO_Remap_I2C1 -* - GPIO_Remap_USART1 -* - GPIO_Remap_USART2 -* - GPIO_PartialRemap_USART3 -* - GPIO_FullRemap_USART3 -* - GPIO_PartialRemap_TIM1 -* - GPIO_FullRemap_TIM1 -* - GPIO_PartialRemap1_TIM2 -* - GPIO_PartialRemap2_TIM2 -* - GPIO_FullRemap_TIM2 -* - GPIO_PartialRemap_TIM3 -* - GPIO_FullRemap_TIM3 -* - GPIO_Remap_TIM4 -* - GPIO_Remap1_CAN -* - GPIO_Remap2_CAN -* - GPIO_Remap_PD01 -* - GPIO_Remap_TIM5CH4_LSI -* - GPIO_Remap_ADC1_ETRGINJ -* - GPIO_Remap_ADC1_ETRGREG -* - GPIO_Remap_ADC2_ETRGINJ -* - GPIO_Remap_ADC2_ETRGREG -* - GPIO_Remap_SWJ_NoJTRST -* - GPIO_Remap_SWJ_JTAGDisable -* - GPIO_Remap_SWJ_Disable -* - NewState: new state of the port pin remapping. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_PinRemapConfig(u32 GPIO_Remap, FunctionalState NewState) -{ - u32 tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_REMAP(GPIO_Remap)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - tmpreg = AFIO->MAPR; - - tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10; - tmp = GPIO_Remap & LSB_MASK; - - if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) - { - tmpreg &= DBGAFR_SWJCFG_MASK; - AFIO->MAPR &= DBGAFR_SWJCFG_MASK; - } - else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) - { - tmp1 = ((u32)0x03) << tmpmask; - tmpreg &= ~tmp1; - tmpreg |= ~DBGAFR_SWJCFG_MASK; - } - else - { - tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10)); - tmpreg |= ~DBGAFR_SWJCFG_MASK; - } - - if (NewState != DISABLE) - { - tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10)); - } - - AFIO->MAPR = tmpreg; -} - -/******************************************************************************* -* Function Name : GPIO_EXTILineConfig -* Description : Selects the GPIO pin used as EXTI Line. -* Input : - GPIO_PortSource: selects the GPIO port to be used as -* source for EXTI lines. -* This parameter can be GPIO_PortSourceGPIOx where x can be -* (A..G). -* - GPIO_PinSource: specifies the EXTI line to be configured. -* This parameter can be GPIO_PinSourcex where x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_EXTILineConfig(u8 GPIO_PortSource, u8 GPIO_PinSource) -{ - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource)); - assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); - - tmp = ((u32)0x0F) << (0x04 * (GPIO_PinSource & (u8)0x03)); - - AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp; - AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((u32)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (u8)0x03))); -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_i2c.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_i2c.c deleted file mode 100755 index 8a26a69..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_i2c.c +++ /dev/null @@ -1,1237 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_i2c.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the I2C firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_i2c.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* I2C SPE mask */ -#define CR1_PE_Set ((u16)0x0001) -#define CR1_PE_Reset ((u16)0xFFFE) - -/* I2C START mask */ -#define CR1_START_Set ((u16)0x0100) -#define CR1_START_Reset ((u16)0xFEFF) - -/* I2C STOP mask */ -#define CR1_STOP_Set ((u16)0x0200) -#define CR1_STOP_Reset ((u16)0xFDFF) - -/* I2C ACK mask */ -#define CR1_ACK_Set ((u16)0x0400) -#define CR1_ACK_Reset ((u16)0xFBFF) - -/* I2C ENGC mask */ -#define CR1_ENGC_Set ((u16)0x0040) -#define CR1_ENGC_Reset ((u16)0xFFBF) - -/* I2C SWRST mask */ -#define CR1_SWRST_Set ((u16)0x8000) -#define CR1_SWRST_Reset ((u16)0x7FFF) - -/* I2C PEC mask */ -#define CR1_PEC_Set ((u16)0x1000) -#define CR1_PEC_Reset ((u16)0xEFFF) - -/* I2C ENPEC mask */ -#define CR1_ENPEC_Set ((u16)0x0020) -#define CR1_ENPEC_Reset ((u16)0xFFDF) - -/* I2C ENARP mask */ -#define CR1_ENARP_Set ((u16)0x0010) -#define CR1_ENARP_Reset ((u16)0xFFEF) - -/* I2C NOSTRETCH mask */ -#define CR1_NOSTRETCH_Set ((u16)0x0080) -#define CR1_NOSTRETCH_Reset ((u16)0xFF7F) - -/* I2C registers Masks */ -#define CR1_CLEAR_Mask ((u16)0xFBF5) - -/* I2C DMAEN mask */ -#define CR2_DMAEN_Set ((u16)0x0800) -#define CR2_DMAEN_Reset ((u16)0xF7FF) - -/* I2C LAST mask */ -#define CR2_LAST_Set ((u16)0x1000) -#define CR2_LAST_Reset ((u16)0xEFFF) - -/* I2C FREQ mask */ -#define CR2_FREQ_Reset ((u16)0xFFC0) - -/* I2C ADD0 mask */ -#define OAR1_ADD0_Set ((u16)0x0001) -#define OAR1_ADD0_Reset ((u16)0xFFFE) - -/* I2C ENDUAL mask */ -#define OAR2_ENDUAL_Set ((u16)0x0001) -#define OAR2_ENDUAL_Reset ((u16)0xFFFE) - -/* I2C ADD2 mask */ -#define OAR2_ADD2_Reset ((u16)0xFF01) - -/* I2C F/S mask */ -#define CCR_FS_Set ((u16)0x8000) - -/* I2C CCR mask */ -#define CCR_CCR_Set ((u16)0x0FFF) - -/* I2C FLAG mask */ -#define FLAG_Mask ((u32)0x00FFFFFF) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : I2C_DeInit -* Description : Deinitializes the I2Cx peripheral registers to their default -* reset values. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_DeInit(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - switch (*(u32*)&I2Cx) - { - case I2C1_BASE: - /* Enable I2C1 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE); - /* Release I2C1 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE); - break; - - case I2C2_BASE: - /* Enable I2C2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE); - /* Release I2C2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : I2C_Init -* Description : Initializes the I2Cx peripheral according to the specified -* parameters in the I2C_InitStruct. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_InitStruct: pointer to a I2C_InitTypeDef structure that -* contains the configuration information for the specified -* I2C peripheral. -* Output : None -* Return : None -******************************************************************************/ -void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct) -{ - u16 tmpreg = 0, freqrange = 0; - u16 result = 0x04; - u32 pclk1 = 8000000; - RCC_ClocksTypeDef rcc_clocks; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle)); - assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); - assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack)); - assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); - assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed)); - -/*---------------------------- I2Cx CR2 Configuration ------------------------*/ - /* Get the I2Cx CR2 value */ - tmpreg = I2Cx->CR2; - /* Clear frequency FREQ[5:0] bits */ - tmpreg &= CR2_FREQ_Reset; - /* Get pclk1 frequency value */ - RCC_GetClocksFreq(&rcc_clocks); - pclk1 = rcc_clocks.PCLK1_Frequency; - /* Set frequency bits depending on pclk1 value */ - freqrange = (u16)(pclk1 / 1000000); - tmpreg |= freqrange; - /* Write to I2Cx CR2 */ - I2Cx->CR2 = tmpreg; - -/*---------------------------- I2Cx CCR Configuration ------------------------*/ - /* Disable the selected I2C peripheral to configure TRISE */ - I2Cx->CR1 &= CR1_PE_Reset; - - /* Reset tmpreg value */ - /* Clear F/S, DUTY and CCR[11:0] bits */ - tmpreg = 0; - - /* Configure speed in standard mode */ - if (I2C_InitStruct->I2C_ClockSpeed <= 100000) - { - /* Standard mode speed calculate */ - result = (u16)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); - /* Test if CCR value is under 0x4*/ - if (result < 0x04) - { - /* Set minimum allowed value */ - result = 0x04; - } - /* Set speed value for standard mode */ - tmpreg |= result; - /* Set Maximum Rise Time for standard mode */ - I2Cx->TRISE = freqrange + 1; - } - /* Configure speed in fast mode */ - else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/ - { - if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) - { - /* Fast mode speed calculate: Tlow/Thigh = 2 */ - result = (u16)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); - } - else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/ - { - /* Fast mode speed calculate: Tlow/Thigh = 16/9 */ - result = (u16)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); - /* Set DUTY bit */ - result |= I2C_DutyCycle_16_9; - } - /* Test if CCR value is under 0x1*/ - if ((result & CCR_CCR_Set) == 0) - { - /* Set minimum allowed value */ - result |= (u16)0x0001; - } - /* Set speed value and set F/S bit for fast mode */ - tmpreg |= result | CCR_FS_Set; - /* Set Maximum Rise Time for fast mode */ - I2Cx->TRISE = (u16)(((freqrange * 300) / 1000) + 1); - } - /* Write to I2Cx CCR */ - I2Cx->CCR = tmpreg; - - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= CR1_PE_Set; - -/*---------------------------- I2Cx CR1 Configuration ------------------------*/ - /* Get the I2Cx CR1 value */ - tmpreg = I2Cx->CR1; - /* Clear ACK, SMBTYPE and SMBUS bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure I2Cx: mode and acknowledgement */ - /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */ - /* Set ACK bit according to I2C_Ack value */ - tmpreg |= (u16)((u32)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); - /* Write to I2Cx CR1 */ - I2Cx->CR1 = tmpreg; - -/*---------------------------- I2Cx OAR1 Configuration -----------------------*/ - /* Set I2Cx Own Address1 and acknowledged address */ - I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); -} - -/******************************************************************************* -* Function Name : I2C_StructInit -* Description : Fills each I2C_InitStruct member with its default value. -* Input : - I2C_InitStruct: pointer to an I2C_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) -{ -/*---------------- Reset I2C init structure parameters values ----------------*/ - /* Initialize the I2C_Mode member */ - I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; - - /* Initialize the I2C_DutyCycle member */ - I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; - - /* Initialize the I2C_OwnAddress1 member */ - I2C_InitStruct->I2C_OwnAddress1 = 0; - - /* Initialize the I2C_Ack member */ - I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; - - /* Initialize the I2C_AcknowledgedAddress member */ - I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; - - /* initialize the I2C_ClockSpeed member */ - I2C_InitStruct->I2C_ClockSpeed = 5000; -} - -/******************************************************************************* -* Function Name : I2C_Cmd -* Description : Enables or disables the specified I2C peripheral. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2Cx peripheral. This parameter -* can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= CR1_PE_Set; - } - else - { - /* Disable the selected I2C peripheral */ - I2Cx->CR1 &= CR1_PE_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_DMACmd -* Description : Enables or disables the specified I2C DMA requests. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C DMA transfer. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C DMA requests */ - I2Cx->CR2 |= CR2_DMAEN_Set; - } - else - { - /* Disable the selected I2C DMA requests */ - I2Cx->CR2 &= CR2_DMAEN_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_DMALastTransferCmd -* Description : Specifies that the next DMA transfer is the last one. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C DMA last transfer. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Next DMA transfer is the last transfer */ - I2Cx->CR2 |= CR2_LAST_Set; - } - else - { - /* Next DMA transfer is not the last transfer */ - I2Cx->CR2 &= CR2_LAST_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_GenerateSTART -* Description : Generates I2Cx communication START condition. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C START condition generation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Generate a START condition */ - I2Cx->CR1 |= CR1_START_Set; - } - else - { - /* Disable the START condition generation */ - I2Cx->CR1 &= CR1_START_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_GenerateSTOP -* Description : Generates I2Cx communication STOP condition. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C STOP condition generation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Generate a STOP condition */ - I2Cx->CR1 |= CR1_STOP_Set; - } - else - { - /* Disable the STOP condition generation */ - I2Cx->CR1 &= CR1_STOP_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_AcknowledgeConfig -* Description : Enables or disables the specified I2C acknowledge feature. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C Acknowledgement. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the acknowledgement */ - I2Cx->CR1 |= CR1_ACK_Set; - } - else - { - /* Disable the acknowledgement */ - I2Cx->CR1 &= CR1_ACK_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_OwnAddress2Config -* Description : Configures the specified I2C own address2. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - Address: specifies the 7bit I2C own address2. -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, u8 Address) -{ - u16 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Get the old register value */ - tmpreg = I2Cx->OAR2; - /* Reset I2Cx Own address2 bit [7:1] */ - tmpreg &= OAR2_ADD2_Reset; - /* Set I2Cx Own address2 */ - tmpreg |= (u16)(Address & (u16)0x00FE); - /* Store the new register value */ - I2Cx->OAR2 = tmpreg; -} - -/******************************************************************************* -* Function Name : I2C_DualAddressCmd -* Description : Enables or disables the specified I2C dual addressing mode. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C dual addressing mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable dual addressing mode */ - I2Cx->OAR2 |= OAR2_ENDUAL_Set; - } - else - { - /* Disable dual addressing mode */ - I2Cx->OAR2 &= OAR2_ENDUAL_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_GeneralCallCmd -* Description : Enables or disables the specified I2C general call feature. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C General call. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable generall call */ - I2Cx->CR1 |= CR1_ENGC_Set; - } - else - { - /* Disable generall call */ - I2Cx->CR1 &= CR1_ENGC_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_ITConfig -* Description : Enables or disables the specified I2C interrupts. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_IT: specifies the I2C interrupts sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - I2C_IT_BUF: Buffer interrupt mask -* - I2C_IT_EVT: Event interrupt mask -* - I2C_IT_ERR: Error interrupt mask -* - NewState: new state of the specified I2C interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_ITConfig(I2C_TypeDef* I2Cx, u16 I2C_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_I2C_CONFIG_IT(I2C_IT)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C interrupts */ - I2Cx->CR2 |= I2C_IT; - } - else - { - /* Disable the selected I2C interrupts */ - I2Cx->CR2 &= (u16)~I2C_IT; - } -} - -/******************************************************************************* -* Function Name : I2C_SendData -* Description : Sends a data byte through the I2Cx peripheral. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - Data: Byte to be transmitted.. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_SendData(I2C_TypeDef* I2Cx, u8 Data) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Write in the DR register the data to be sent */ - I2Cx->DR = Data; -} - -/******************************************************************************* -* Function Name : I2C_ReceiveData -* Description : Returns the most recent received data by the I2Cx peripheral. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* Output : None -* Return : The value of the received data. -*******************************************************************************/ -u8 I2C_ReceiveData(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Return the data in the DR register */ - return (u8)I2Cx->DR; -} - -/******************************************************************************* -* Function Name : I2C_Send7bitAddress -* Description : Transmits the address byte to select the slave device. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - Address: specifies the slave address which will be transmitted -* - I2C_Direction: specifies whether the I2C device will be a -* Transmitter or a Receiver. -* This parameter can be one of the following values -* - I2C_Direction_Transmitter: Transmitter mode -* - I2C_Direction_Receiver: Receiver mode -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, u8 Address, u8 I2C_Direction) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DIRECTION(I2C_Direction)); - - /* Test on the direction to set/reset the read/write bit */ - if (I2C_Direction != I2C_Direction_Transmitter) - { - /* Set the address bit0 for read */ - Address |= OAR1_ADD0_Set; - } - else - { - /* Reset the address bit0 for write */ - Address &= OAR1_ADD0_Reset; - } - /* Send the address */ - I2Cx->DR = Address; -} - -/******************************************************************************* -* Function Name : I2C_ReadRegister -* Description : Reads the specified I2C register and returns its value. -* Input1 : - I2C_Register: specifies the register to read. -* This parameter can be one of the following values: -* - I2C_Register_CR1: CR1 register. -* - I2C_Register_CR2: CR2 register. -* - I2C_Register_OAR1: OAR1 register. -* - I2C_Register_OAR2: OAR2 register. -* - I2C_Register_DR: DR register. -* - I2C_Register_SR1: SR1 register. -* - I2C_Register_SR2: SR2 register. -* - I2C_Register_CCR: CCR register. -* - I2C_Register_TRISE: TRISE register. -* Output : None -* Return : The value of the read register. -*******************************************************************************/ -u16 I2C_ReadRegister(I2C_TypeDef* I2Cx, u8 I2C_Register) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_REGISTER(I2C_Register)); - - /* Return the selected register value */ - return (*(vu16 *)(*((vu32 *)&I2Cx) + I2C_Register)); -} - -/******************************************************************************* -* Function Name : I2C_SoftwareResetCmd -* Description : Enables or disables the specified I2C software reset. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C software reset. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Peripheral under reset */ - I2Cx->CR1 |= CR1_SWRST_Set; - } - else - { - /* Peripheral not under reset */ - I2Cx->CR1 &= CR1_SWRST_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_SMBusAlertConfig -* Description : Drives the SMBusAlert pin high or low for the specified I2C. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_SMBusAlert: specifies SMBAlert pin level. -* This parameter can be one of the following values: -* - I2C_SMBusAlert_Low: SMBAlert pin driven low -* - I2C_SMBusAlert_High: SMBAlert pin driven high -* Output : None -* Return : None -*******************************************************************************/ -void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, u16 I2C_SMBusAlert) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert)); - - if (I2C_SMBusAlert == I2C_SMBusAlert_Low) - { - /* Drive the SMBusAlert pin Low */ - I2Cx->CR1 |= I2C_SMBusAlert_Low; - } - else - { - /* Drive the SMBusAlert pin High */ - I2Cx->CR1 &= I2C_SMBusAlert_High; - } -} - -/******************************************************************************* -* Function Name : I2C_TransmitPEC -* Description : Enables or disables the specified I2C PEC transfer. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C PEC transmission. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC transmission */ - I2Cx->CR1 |= CR1_PEC_Set; - } - else - { - /* Disable the selected I2C PEC transmission */ - I2Cx->CR1 &= CR1_PEC_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_PECPositionConfig -* Description : Selects the specified I2C PEC position. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_PECPosition: specifies the PEC position. -* This parameter can be one of the following values: -* - I2C_PECPosition_Next: indicates that the next -* byte is PEC -* - I2C_PECPosition_Current: indicates that current -* byte is PEC -* Output : None -* Return : None -*******************************************************************************/ -void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, u16 I2C_PECPosition) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition)); - - if (I2C_PECPosition == I2C_PECPosition_Next) - { - /* Next byte in shift register is PEC */ - I2Cx->CR1 |= I2C_PECPosition_Next; - } - else - { - /* Current byte in shift register is PEC */ - I2Cx->CR1 &= I2C_PECPosition_Current; - } -} - -/******************************************************************************* -* Function Name : I2C_CalculatePEC -* Description : Enables or disables the PEC value calculation of the -* transfered bytes. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2Cx PEC value calculation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC calculation */ - I2Cx->CR1 |= CR1_ENPEC_Set; - } - else - { - /* Disable the selected I2C PEC calculation */ - I2Cx->CR1 &= CR1_ENPEC_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_GetPEC -* Description : Returns the PEC value for the specified I2C. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* Output : None -* Return : The PEC value. -*******************************************************************************/ -u8 I2C_GetPEC(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Return the selected I2C PEC value */ - return ((I2Cx->SR2) >> 8); -} - -/******************************************************************************* -* Function Name : I2C_ARPCmd -* Description : Enables or disables the specified I2C ARP. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2Cx ARP. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C ARP */ - I2Cx->CR1 |= CR1_ENARP_Set; - } - else - { - /* Disable the selected I2C ARP */ - I2Cx->CR1 &= CR1_ENARP_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_StretchClockCmd -* Description : Enables or disables the specified I2C Clock stretching. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2Cx Clock stretching. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState == DISABLE) - { - /* Enable the selected I2C Clock stretching */ - I2Cx->CR1 |= CR1_NOSTRETCH_Set; - } - else - { - /* Disable the selected I2C Clock stretching */ - I2Cx->CR1 &= CR1_NOSTRETCH_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_FastModeDutyCycleConfig -* Description : Selects the specified I2C fast mode duty cycle. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_DutyCycle: specifies the fast mode duty cycle. -* This parameter can be one of the following values: -* - I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2 -* - I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9 -* Output : None -* Return : None -*******************************************************************************/ -void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, u16 I2C_DutyCycle) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle)); - - if (I2C_DutyCycle != I2C_DutyCycle_16_9) - { - /* I2C fast mode Tlow/Thigh=2 */ - I2Cx->CCR &= I2C_DutyCycle_2; - } - else - { - /* I2C fast mode Tlow/Thigh=16/9 */ - I2Cx->CCR |= I2C_DutyCycle_16_9; - } -} - -/******************************************************************************* -* Function Name : I2C_GetLastEvent -* Description : Returns the last I2Cx Event. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* Output : None -* Return : The last event -*******************************************************************************/ -u32 I2C_GetLastEvent(I2C_TypeDef* I2Cx) -{ - u32 lastevent = 0; - u32 flag1 = 0, flag2 = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_Mask; - - /* Return status */ - return lastevent; -} - -/******************************************************************************* -* Function Name : I2C_CheckEvent -* Description : Checks whether the last I2Cx Event is equal to the one passed -* as parameter. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_EVENT: specifies the event to be checked. -* This parameter can be one of the following values: -* - I2C_EVENT_SLAVE_ADDRESS_MATCHED : EV1 -* - I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2 -* - I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3 -* - I2C_EVENT_SLAVE_ACK_FAILURE : EV3-2 -* - I2C_EVENT_MASTER_MODE_SELECT : EV5 -* - I2C_EVENT_MASTER_MODE_SELECTED : EV6 -* - I2C_EVENT_MASTER_BYTE_RECEIVED : EV7 -* - I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8 -* - I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9 -* - I2C_EVENT_SLAVE_STOP_DETECTED : EV4 -* Output : None -* Return : An ErrorStatus enumuration value: -* - SUCCESS: Last event is equal to the I2C_EVENT -* - ERROR: Last event is different from the I2C_EVENT -*******************************************************************************/ -ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, u32 I2C_EVENT) -{ - u32 lastevent = 0; - u32 flag1 = 0, flag2 = 0; - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_EVENT(I2C_EVENT)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_Mask; - - /* Check whether the last event is equal to I2C_EVENT */ - if (lastevent == I2C_EVENT ) - { - /* SUCCESS: last event is equal to I2C_EVENT */ - status = SUCCESS; - } - else - { - /* ERROR: last event is different from I2C_EVENT */ - status = ERROR; - } - - /* Return status */ - return status; -} - -/******************************************************************************* -* Function Name : I2C_GetFlagStatus -* Description : Checks whether the specified I2C flag is set or not. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - I2C_FLAG_DUALF: Dual flag (Slave mode) -* - I2C_FLAG_SMBHOST: SMBus host header (Slave mode) -* - I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode) -* - I2C_FLAG_GENCALL: General call header flag (Slave mode) -* - I2C_FLAG_TRA: Transmitter/Receiver flag -* - I2C_FLAG_BUSY: Bus busy flag -* - I2C_FLAG_MSL: Master/Slave flag -* - I2C_FLAG_SMBALERT: SMBus Alert flag -* - I2C_FLAG_TIMEOUT: Timeout or Tlow error flag -* - I2C_FLAG_PECERR: PEC error in reception flag -* - I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) -* - I2C_FLAG_AF: Acknowledge failure flag -* - I2C_FLAG_ARLO: Arbitration lost flag (Master mode) -* - I2C_FLAG_BERR: Bus error flag -* - I2C_FLAG_TXE: Data register empty flag (Transmitter) -* - I2C_FLAG_RXNE: Data register not empty (Receiver) flag -* - I2C_FLAG_STOPF: Stop detection flag (Slave mode) -* - I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) -* - I2C_FLAG_BTF: Byte transfer finished flag -* - I2C_FLAG_ADDR: Address sent flag (Master mode) “ADSL” -* Address matched flag (Slave mode)”ENDAD” -* - I2C_FLAG_SB: Start bit flag (Master mode) -* Output : None -* Return : The new state of I2C_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, u32 I2C_FLAG) -{ - FlagStatus bitstatus = RESET; - u32 i2cstatus = 0; - u32 flag1 = 0, flag2 = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = (flag2 & FLAG_Mask) << 16; - - /* Get the I2C status value */ - i2cstatus = flag1 | flag2; - - /* Get bit[23:0] of the flag */ - I2C_FLAG &= FLAG_Mask; - - /* Check the status of the specified I2C flag */ - if ((i2cstatus & I2C_FLAG) != (u32)RESET) - { - /* I2C_FLAG is set */ - bitstatus = SET; - } - else - { - /* I2C_FLAG is reset */ - bitstatus = RESET; - } - /* Return the I2C_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : I2C_ClearFlag -* Description : Clears the I2Cx's pending flags. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_FLAG: specifies the flag to clear. -* This parameter can be one of the following values: -* - I2C_FLAG_SMBALERT: SMBus Alert flag -* - I2C_FLAG_TIMEOUT: Timeout or Tlow error flag -* - I2C_FLAG_PECERR: PEC error in reception flag -* - I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) -* - I2C_FLAG_AF: Acknowledge failure flag -* - I2C_FLAG_ARLO: Arbitration lost flag (Master mode) -* - I2C_FLAG_BERR: Bus error flag -* - I2C_FLAG_STOPF: Stop detection flag (Slave mode) -* - I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) -* - I2C_FLAG_BTF: Byte transfer finished flag -* - I2C_FLAG_ADDR: Address sent flag (Master mode) “ADSL” -* Address matched flag (Slave mode)”ENDAD” -* - I2C_FLAG_SB: Start bit flag (Master mode) -* Output : None -* Return : None -*******************************************************************************/ -void I2C_ClearFlag(I2C_TypeDef* I2Cx, u32 I2C_FLAG) -{ - u32 flagpos = 0; - u32 flagindex = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); - - /* Get the I2C flag position */ - flagpos = I2C_FLAG & FLAG_Mask; - - /* Get the I2C flag index */ - flagindex = I2C_FLAG >> 28; - - /* Clear the flag by writing 0 */ - if (flagindex == 1) - { - /* Clear the selected I2C flag */ - I2Cx->SR1 = (u16)~flagpos; - } - /* Flags that need a read of the SR1 register to be cleared */ - else if (flagindex == 2) - { - /* Read the SR1 register */ - (void)I2Cx->SR1; - } - /* Flags that need a read of SR1 and a write on CR1 registers to be cleared */ - else if (flagindex == 6) - { - /* Read the SR1 register */ - (void)I2Cx->SR1; - - /* Write on the CR1 register */ - I2Cx->CR1 |= CR1_PE_Set; - } - /* Flags that need a read of SR1 and SR2 registers to be cleared */ - else /*flagindex == 0xA*/ - { - /* Read the SR1 register */ - (void)I2Cx->SR1; - - /* Read the SR2 register */ - (void)I2Cx->SR2; - } -} - -/******************************************************************************* -* Function Name : I2C_GetITStatus -* Description : Checks whether the specified I2C interrupt has occurred or not. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_IT: specifies the interrupt source to check. -* This parameter can be one of the following values: -* - I2C_IT_SMBALERT: SMBus Alert flag -* - I2C_IT_TIMEOUT: Timeout or Tlow error flag -* - I2C_IT_PECERR: PEC error in reception flag -* - I2C_IT_OVR: Overrun/Underrun flag (Slave mode) -* - I2C_IT_AF: Acknowledge failure flag -* - I2C_IT_ARLO: Arbitration lost flag (Master mode) -* - I2C_IT_BERR: Bus error flag -* - I2C_IT_TXE: Data register empty flag (Transmitter) -* - I2C_IT_RXNE: Data register not empty (Receiver) flag -* - I2C_IT_STOPF: Stop detection flag (Slave mode) -* - I2C_IT_ADD10: 10-bit header sent flag (Master mode) -* - I2C_IT_BTF: Byte transfer finished flag -* - I2C_IT_ADDR: Address sent flag (Master mode) “ADSL” -* Address matched flag (Slave mode)”ENDAD” -* - I2C_IT_SB: Start bit flag (Master mode) -* Output : None -* Return : The new state of I2C_IT (SET or RESET). -*******************************************************************************/ -ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, u32 I2C_IT) -{ - ITStatus bitstatus = RESET; - u32 i2cstatus = 0; - u32 flag1 = 0, flag2 = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_IT(I2C_IT)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = (flag2 & FLAG_Mask) << 16; - - /* Get the I2C status value */ - i2cstatus = flag1 | flag2; - - /* Get bit[23:0] of the flag */ - I2C_IT &= FLAG_Mask; - - /* Check the status of the specified I2C flag */ - if ((i2cstatus & I2C_IT) != (u32)RESET) - { - /* I2C_IT is set */ - bitstatus = SET; - } - else - { - /* I2C_IT is reset */ - bitstatus = RESET; - } - /* Return the I2C_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : I2C_ClearITPendingBit -* Description : Clears the I2Cx’s interrupt pending bits. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_IT: specifies the interrupt pending bit to clear. -* This parameter can be one of the following values: -* - I2C_IT_SMBALERT: SMBus Alert flag -* - I2C_IT_TIMEOUT: Timeout or Tlow error flag -* - I2C_IT_PECERR: PEC error in reception flag -* - I2C_IT_OVR: Overrun/Underrun flag (Slave mode) -* - I2C_IT_AF: Acknowledge failure flag -* - I2C_IT_ARLO: Arbitration lost flag (Master mode) -* - I2C_IT_BERR: Bus error flag -* - I2C_IT_STOPF: Stop detection flag (Slave mode) -* - I2C_IT_ADD10: 10-bit header sent flag (Master mode) -* - I2C_IT_BTF: Byte transfer finished flag -* - I2C_IT_ADDR: Address sent flag (Master mode) “ADSL” -* Address matched flag (Slave mode)”ENDAD” -* - I2C_IT_SB: Start bit flag (Master mode) -* Output : None -* Return : None -*******************************************************************************/ -void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, u32 I2C_IT) -{ - u32 flagpos = 0; - u32 flagindex = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_IT(I2C_IT)); - - /* Get the I2C flag position */ - flagpos = I2C_IT & FLAG_Mask; - - /* Get the I2C flag index */ - flagindex = I2C_IT >> 28; - - /* Clear the flag by writing 0 */ - if (flagindex == 1) - { - /* Clear the selected I2C flag */ - I2Cx->SR1 = (u16)~flagpos; - } - /* Flags that need a read of the SR1 register to be cleared */ - else if (flagindex == 2) - { - /* Read the SR1 register */ - (void)I2Cx->SR1; - } - /* Flags that need a read of SR1 and a write on CR1 registers to be cleared */ - else if (flagindex == 6) - { - /* Read the SR1 register */ - (void)I2Cx->SR1; - - /* Write on the CR1 register */ - I2Cx->CR1 |= CR1_PE_Set; - } - /* Flags that need a read of SR1 and SR2 registers to be cleared */ - else /*flagindex == 0xA*/ - { - /* Read the SR1 register */ - (void)I2Cx->SR1; - - /* Read the SR2 register */ - (void)I2Cx->SR2; - } -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_iwdg.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_iwdg.c deleted file mode 100755 index 4c6143e..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_iwdg.c +++ /dev/null @@ -1,148 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_iwdg.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the IWDG firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_iwdg.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ---------------------- IWDG registers bit mask ------------------------ */ -/* KR register bit mask */ -#define KR_KEY_Reload ((u16)0xAAAA) -#define KR_KEY_Enable ((u16)0xCCCC) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : IWDG_WriteAccessCmd -* Description : Enables or disables write access to IWDG_PR and IWDG_RLR -* registers. -* Input : - IWDG_WriteAccess: new state of write access to IWDG_PR and -* IWDG_RLR registers. -* This parameter can be one of the following values: -* - IWDG_WriteAccess_Enable: Enable write access to -* IWDG_PR and IWDG_RLR registers -* - IWDG_WriteAccess_Disable: Disable write access to -* IWDG_PR and IWDG_RLR registers -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_WriteAccessCmd(u16 IWDG_WriteAccess) -{ - /* Check the parameters */ - assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess)); - - IWDG->KR = IWDG_WriteAccess; -} - -/******************************************************************************* -* Function Name : IWDG_SetPrescaler -* Description : Sets IWDG Prescaler value. -* Input : - IWDG_Prescaler: specifies the IWDG Prescaler value. -* This parameter can be one of the following values: -* - IWDG_Prescaler_4: IWDG prescaler set to 4 -* - IWDG_Prescaler_8: IWDG prescaler set to 8 -* - IWDG_Prescaler_16: IWDG prescaler set to 16 -* - IWDG_Prescaler_32: IWDG prescaler set to 32 -* - IWDG_Prescaler_64: IWDG prescaler set to 64 -* - IWDG_Prescaler_128: IWDG prescaler set to 128 -* - IWDG_Prescaler_256: IWDG prescaler set to 256 -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_SetPrescaler(u8 IWDG_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler)); - - IWDG->PR = IWDG_Prescaler; -} - -/******************************************************************************* -* Function Name : IWDG_SetReload -* Description : Sets IWDG Reload value. -* Input : - Reload: specifies the IWDG Reload value. -* This parameter must be a number between 0 and 0x0FFF. -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_SetReload(u16 Reload) -{ - /* Check the parameters */ - assert_param(IS_IWDG_RELOAD(Reload)); - - IWDG->RLR = Reload; -} - -/******************************************************************************* -* Function Name : IWDG_ReloadCounter -* Description : Reloads IWDG counter with value defined in the reload register -* (write access to IWDG_PR and IWDG_RLR registers disabled). -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_ReloadCounter(void) -{ - IWDG->KR = KR_KEY_Reload; -} - -/******************************************************************************* -* Function Name : IWDG_Enable -* Description : Enables IWDG (write access to IWDG_PR and IWDG_RLR registers -* disabled). -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_Enable(void) -{ - IWDG->KR = KR_KEY_Enable; -} - -/******************************************************************************* -* Function Name : IWDG_GetFlagStatus -* Description : Checks whether the specified IWDG flag is set or not. -* Input : - IWDG_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - IWDG_FLAG_PVU: Prescaler Value Update on going -* - IWDG_FLAG_RVU: Reload Value Update on going -* Output : None -* Return : The new state of IWDG_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus IWDG_GetFlagStatus(u16 IWDG_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_IWDG_FLAG(IWDG_FLAG)); - - if ((IWDG->SR & IWDG_FLAG) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the flag status */ - return bitstatus; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_lib.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_lib.c deleted file mode 100755 index 988ac9f..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_lib.c +++ /dev/null @@ -1,303 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_lib.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all peripherals pointers initialization. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -#define EXT - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -#ifdef DEBUG -/******************************************************************************* -* Function Name : debug -* Description : This function initialize peripherals pointers. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void debug(void) -{ - -/************************************* ADC ************************************/ -#ifdef _ADC1 - ADC1 = (ADC_TypeDef *) ADC1_BASE; -#endif /*_ADC1 */ - -#ifdef _ADC2 - ADC2 = (ADC_TypeDef *) ADC2_BASE; -#endif /*_ADC2 */ - -#ifdef _ADC3 - ADC3 = (ADC_TypeDef *) ADC3_BASE; -#endif /*_ADC3 */ - -/************************************* BKP ************************************/ -#ifdef _BKP - BKP = (BKP_TypeDef *) BKP_BASE; -#endif /*_BKP */ - -/************************************* CAN ************************************/ -#ifdef _CAN - CAN = (CAN_TypeDef *) CAN_BASE; -#endif /*_CAN */ - -/************************************* CRC ************************************/ -#ifdef _CRC - CRC = (CRC_TypeDef *) CRC_BASE; -#endif /*_CRC */ - -/************************************* DAC ************************************/ -#ifdef _DAC - DAC = (DAC_TypeDef *) DAC_BASE; -#endif /*_DAC */ - -/************************************* DBGMCU**********************************/ -#ifdef _DBGMCU - DBGMCU = (DBGMCU_TypeDef *) DBGMCU_BASE; -#endif /*_DBGMCU */ - -/************************************* DMA ************************************/ -#ifdef _DMA - DMA1 = (DMA_TypeDef *) DMA1_BASE; - DMA2 = (DMA_TypeDef *) DMA2_BASE; -#endif /*_DMA */ - -#ifdef _DMA1_Channel1 - DMA1_Channel1 = (DMA_Channel_TypeDef *) DMA1_Channel1_BASE; -#endif /*_DMA1_Channel1 */ - -#ifdef _DMA1_Channel2 - DMA1_Channel2 = (DMA_Channel_TypeDef *) DMA1_Channel2_BASE; -#endif /*_DMA1_Channel2 */ - -#ifdef _DMA1_Channel3 - DMA1_Channel3 = (DMA_Channel_TypeDef *) DMA1_Channel3_BASE; -#endif /*_DMA1_Channel3 */ - -#ifdef _DMA1_Channel4 - DMA1_Channel4 = (DMA_Channel_TypeDef *) DMA1_Channel4_BASE; -#endif /*_DMA1_Channel4 */ - -#ifdef _DMA1_Channel5 - DMA1_Channel5 = (DMA_Channel_TypeDef *) DMA1_Channel5_BASE; -#endif /*_DMA1_Channel5 */ - -#ifdef _DMA1_Channel6 - DMA1_Channel6 = (DMA_Channel_TypeDef *) DMA1_Channel6_BASE; -#endif /*_DMA1_Channel6 */ - -#ifdef _DMA1_Channel7 - DMA1_Channel7 = (DMA_Channel_TypeDef *) DMA1_Channel7_BASE; -#endif /*_DMA1_Channel7 */ - -#ifdef _DMA2_Channel1 - DMA2_Channel1 = (DMA_Channel_TypeDef *) DMA2_Channel1_BASE; -#endif /*_DMA2_Channel1 */ - -#ifdef _DMA2_Channel2 - DMA2_Channel2 = (DMA_Channel_TypeDef *) DMA2_Channel2_BASE; -#endif /*_DMA2_Channel2 */ - -#ifdef _DMA2_Channel3 - DMA2_Channel3 = (DMA_Channel_TypeDef *) DMA2_Channel3_BASE; -#endif /*_DMA2_Channel3 */ - -#ifdef _DMA2_Channel4 - DMA2_Channel4 = (DMA_Channel_TypeDef *) DMA2_Channel4_BASE; -#endif /*_DMA2_Channel4 */ - -#ifdef _DMA2_Channel5 - DMA2_Channel5 = (DMA_Channel_TypeDef *) DMA2_Channel5_BASE; -#endif /*_DMA2_Channel5 */ - -/************************************* EXTI ***********************************/ -#ifdef _EXTI - EXTI = (EXTI_TypeDef *) EXTI_BASE; -#endif /*_EXTI */ - -/************************************* FLASH and Option Bytes *****************/ -#ifdef _FLASH - FLASH = (FLASH_TypeDef *) FLASH_R_BASE; - OB = (OB_TypeDef *) OB_BASE; -#endif /*_FLASH */ - -/************************************* FSMC ***********************************/ -#ifdef _FSMC - FSMC_Bank1 = (FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE; - FSMC_Bank1E = (FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE; - FSMC_Bank2 = (FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE; - FSMC_Bank3 = (FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE; - FSMC_Bank4 = (FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE; -#endif /*_FSMC */ - -/************************************* GPIO ***********************************/ -#ifdef _GPIOA - GPIOA = (GPIO_TypeDef *) GPIOA_BASE; -#endif /*_GPIOA */ - -#ifdef _GPIOB - GPIOB = (GPIO_TypeDef *) GPIOB_BASE; -#endif /*_GPIOB */ - -#ifdef _GPIOC - GPIOC = (GPIO_TypeDef *) GPIOC_BASE; -#endif /*_GPIOC */ - -#ifdef _GPIOD - GPIOD = (GPIO_TypeDef *) GPIOD_BASE; -#endif /*_GPIOD */ - -#ifdef _GPIOE - GPIOE = (GPIO_TypeDef *) GPIOE_BASE; -#endif /*_GPIOE */ - -#ifdef _GPIOF - GPIOF = (GPIO_TypeDef *) GPIOF_BASE; -#endif /*_GPIOF */ - -#ifdef _GPIOG - GPIOG = (GPIO_TypeDef *) GPIOG_BASE; -#endif /*_GPIOG */ - -#ifdef _AFIO - AFIO = (AFIO_TypeDef *) AFIO_BASE; -#endif /*_AFIO */ - -/************************************* I2C ************************************/ -#ifdef _I2C1 - I2C1 = (I2C_TypeDef *) I2C1_BASE; -#endif /*_I2C1 */ - -#ifdef _I2C2 - I2C2 = (I2C_TypeDef *) I2C2_BASE; -#endif /*_I2C2 */ - -/************************************* IWDG ***********************************/ -#ifdef _IWDG - IWDG = (IWDG_TypeDef *) IWDG_BASE; -#endif /*_IWDG */ - -/************************************* NVIC ***********************************/ -#ifdef _NVIC - NVIC = (NVIC_TypeDef *) NVIC_BASE; - SCB = (SCB_TypeDef *) SCB_BASE; -#endif /*_NVIC */ - -/************************************* PWR ************************************/ -#ifdef _PWR - PWR = (PWR_TypeDef *) PWR_BASE; -#endif /*_PWR */ - -/************************************* RCC ************************************/ -#ifdef _RCC - RCC = (RCC_TypeDef *) RCC_BASE; -#endif /*_RCC */ - -/************************************* RTC ************************************/ -#ifdef _RTC - RTC = (RTC_TypeDef *) RTC_BASE; -#endif /*_RTC */ - -/************************************* SDIO ***********************************/ -#ifdef _SDIO - SDIO = (SDIO_TypeDef *) SDIO_BASE; -#endif /*_SDIO */ - -/************************************* SPI ************************************/ -#ifdef _SPI1 - SPI1 = (SPI_TypeDef *) SPI1_BASE; -#endif /*_SPI1 */ - -#ifdef _SPI2 - SPI2 = (SPI_TypeDef *) SPI2_BASE; -#endif /*_SPI2 */ - -#ifdef _SPI3 - SPI3 = (SPI_TypeDef *) SPI3_BASE; -#endif /*_SPI3 */ - -/************************************* SysTick ********************************/ -#ifdef _SysTick - SysTick = (SysTick_TypeDef *) SysTick_BASE; -#endif /*_SysTick */ - -/************************************* TIM ************************************/ -#ifdef _TIM1 - TIM1 = (TIM_TypeDef *) TIM1_BASE; -#endif /*_TIM1 */ - -#ifdef _TIM2 - TIM2 = (TIM_TypeDef *) TIM2_BASE; -#endif /*_TIM2 */ - -#ifdef _TIM3 - TIM3 = (TIM_TypeDef *) TIM3_BASE; -#endif /*_TIM3 */ - -#ifdef _TIM4 - TIM4 = (TIM_TypeDef *) TIM4_BASE; -#endif /*_TIM4 */ - -#ifdef _TIM5 - TIM5 = (TIM_TypeDef *) TIM5_BASE; -#endif /*_TIM5 */ - -#ifdef _TIM6 - TIM6 = (TIM_TypeDef *) TIM6_BASE; -#endif /*_TIM6 */ - -#ifdef _TIM7 - TIM7 = (TIM_TypeDef *) TIM7_BASE; -#endif /*_TIM7 */ - -#ifdef _TIM8 - TIM8 = (TIM_TypeDef *) TIM8_BASE; -#endif /*_TIM8 */ - -/************************************* USART **********************************/ -#ifdef _USART1 - USART1 = (USART_TypeDef *) USART1_BASE; -#endif /*_USART1 */ - -#ifdef _USART2 - USART2 = (USART_TypeDef *) USART2_BASE; -#endif /*_USART2 */ - -#ifdef _USART3 - USART3 = (USART_TypeDef *) USART3_BASE; -#endif /*_USART3 */ - -#ifdef _UART4 - UART4 = (USART_TypeDef *) UART4_BASE; -#endif /*_UART4 */ - -#ifdef _UART5 - UART5 = (USART_TypeDef *) UART5_BASE; -#endif /*_UART5 */ - -/************************************* WWDG ***********************************/ -#ifdef _WWDG - WWDG = (WWDG_TypeDef *) WWDG_BASE; -#endif /*_WWDG */ -} -#endif /* DEBUG*/ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_nvic.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_nvic.c deleted file mode 100755 index 272c2cd..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_nvic.c +++ /dev/null @@ -1,751 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_nvic.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the NVIC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_nvic.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define AIRCR_VECTKEY_MASK ((u32)0x05FA0000) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NVIC_DeInit -* Description : Deinitializes the NVIC peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_DeInit(void) -{ - u32 index = 0; - - NVIC->ICER[0] = 0xFFFFFFFF; - NVIC->ICER[1] = 0x0FFFFFFF; - NVIC->ICPR[0] = 0xFFFFFFFF; - NVIC->ICPR[1] = 0x0FFFFFFF; - - for(index = 0; index < 0x0F; index++) - { - NVIC->IPR[index] = 0x00000000; - } -} - -/******************************************************************************* -* Function Name : NVIC_SCBDeInit -* Description : Deinitializes the SCB peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SCBDeInit(void) -{ - u32 index = 0x00; - - SCB->ICSR = 0x0A000000; - SCB->VTOR = 0x00000000; - SCB->AIRCR = AIRCR_VECTKEY_MASK; - SCB->SCR = 0x00000000; - SCB->CCR = 0x00000000; - for(index = 0; index < 0x03; index++) - { - SCB->SHPR[index] = 0; - } - SCB->SHCSR = 0x00000000; - SCB->CFSR = 0xFFFFFFFF; - SCB->HFSR = 0xFFFFFFFF; - SCB->DFSR = 0xFFFFFFFF; -} - -/******************************************************************************* -* Function Name : NVIC_PriorityGroupConfig -* Description : Configures the priority grouping: pre-emption priority -* and subpriority. -* Input : - NVIC_PriorityGroup: specifies the priority grouping bits -* length. This parameter can be one of the following values: -* - NVIC_PriorityGroup_0: 0 bits for pre-emption priority -* 4 bits for subpriority -* - NVIC_PriorityGroup_1: 1 bits for pre-emption priority -* 3 bits for subpriority -* - NVIC_PriorityGroup_2: 2 bits for pre-emption priority -* 2 bits for subpriority -* - NVIC_PriorityGroup_3: 3 bits for pre-emption priority -* 1 bits for subpriority -* - NVIC_PriorityGroup_4: 4 bits for pre-emption priority -* 0 bits for subpriority -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_PriorityGroupConfig(u32 NVIC_PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ - SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; -} - -/******************************************************************************* -* Function Name : NVIC_Init -* Description : Initializes the NVIC peripheral according to the specified -* parameters in the NVIC_InitStruct. -* Input : - NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure -* that contains the configuration information for the -* specified NVIC peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) -{ - u32 tmppriority = 0x00, tmpreg = 0x00, tmpmask = 0x00; - u32 tmppre = 0, tmpsub = 0x0F; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_InitStruct->NVIC_IRQChannel)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); - assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); - - if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) - { - /* Compute the Corresponding IRQ Priority --------------------------------*/ - tmppriority = (0x700 - (SCB->AIRCR & (u32)0x700))>> 0x08; - tmppre = (0x4 - tmppriority); - tmpsub = tmpsub >> tmppriority; - - tmppriority = (u32)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; - tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; - - tmppriority = tmppriority << 0x04; - tmppriority = ((u32)tmppriority) << ((NVIC_InitStruct->NVIC_IRQChannel & (u8)0x03) * 0x08); - - tmpreg = NVIC->IPR[(NVIC_InitStruct->NVIC_IRQChannel >> 0x02)]; - tmpmask = (u32)0xFF << ((NVIC_InitStruct->NVIC_IRQChannel & (u8)0x03) * 0x08); - tmpreg &= ~tmpmask; - tmppriority &= tmpmask; - tmpreg |= tmppriority; - - NVIC->IPR[(NVIC_InitStruct->NVIC_IRQChannel >> 0x02)] = tmpreg; - - /* Enable the Selected IRQ Channels --------------------------------------*/ - NVIC->ISER[(NVIC_InitStruct->NVIC_IRQChannel >> 0x05)] = - (u32)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (u8)0x1F); - } - else - { - /* Disable the Selected IRQ Channels -------------------------------------*/ - NVIC->ICER[(NVIC_InitStruct->NVIC_IRQChannel >> 0x05)] = - (u32)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (u8)0x1F); - } -} - -/******************************************************************************* -* Function Name : NVIC_StructInit -* Description : Fills each NVIC_InitStruct member with its default value. -* Input : - NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure which -* will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_StructInit(NVIC_InitTypeDef* NVIC_InitStruct) -{ - /* NVIC_InitStruct members default value */ - NVIC_InitStruct->NVIC_IRQChannel = 0x00; - NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority = 0x00; - NVIC_InitStruct->NVIC_IRQChannelSubPriority = 0x00; - NVIC_InitStruct->NVIC_IRQChannelCmd = DISABLE; -} - -/******************************************************************************* -* Function Name : NVIC_SETPRIMASK -* Description : Enables the PRIMASK priority: Raises the execution priority to 0. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SETPRIMASK(void) -{ - __SETPRIMASK(); -} - -/******************************************************************************* -* Function Name : NVIC_RESETPRIMASK -* Description : Disables the PRIMASK priority. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_RESETPRIMASK(void) -{ - __RESETPRIMASK(); -} - -/******************************************************************************* -* Function Name : NVIC_SETFAULTMASK -* Description : Enables the FAULTMASK priority: Raises the execution priority to -1. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SETFAULTMASK(void) -{ - __SETFAULTMASK(); -} - -/******************************************************************************* -* Function Name : NVIC_RESETFAULTMASK -* Description : Disables the FAULTMASK priority. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_RESETFAULTMASK(void) -{ - __RESETFAULTMASK(); -} - -/******************************************************************************* -* Function Name : NVIC_BASEPRICONFIG -* Description : The execution priority can be changed from 15 (lowest - configurable priority) to 1. Writing a zero value will disable -* the mask of execution priority. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_BASEPRICONFIG(u32 NewPriority) -{ - /* Check the parameters */ - assert_param(IS_NVIC_BASE_PRI(NewPriority)); - - __BASEPRICONFIG(NewPriority << 0x04); -} - -/******************************************************************************* -* Function Name : NVIC_GetBASEPRI -* Description : Returns the BASEPRI mask value. -* Input : None -* Output : None -* Return : BASEPRI register value -*******************************************************************************/ -u32 NVIC_GetBASEPRI(void) -{ - return (__GetBASEPRI()); -} - -/******************************************************************************* -* Function Name : NVIC_GetCurrentPendingIRQChannel -* Description : Returns the current pending IRQ channel identifier. -* Input : None -* Output : None -* Return : Pending IRQ Channel Identifier. -*******************************************************************************/ -u16 NVIC_GetCurrentPendingIRQChannel(void) -{ - return ((u16)((SCB->ICSR & (u32)0x003FF000) >> 0x0C)); -} - -/******************************************************************************* -* Function Name : NVIC_GetIRQChannelPendingBitStatus -* Description : Checks whether the specified IRQ Channel pending bit is set -* or not. -* Input : - NVIC_IRQChannel: specifies the interrupt pending bit to check. -* Output : None -* Return : The new state of IRQ Channel pending bit(SET or RESET). -*******************************************************************************/ -ITStatus NVIC_GetIRQChannelPendingBitStatus(u8 NVIC_IRQChannel) -{ - ITStatus pendingirqstatus = RESET; - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_IRQChannel)); - - tmp = ((u32)0x01 << (NVIC_IRQChannel & (u32)0x1F)); - - if (((NVIC->ISPR[(NVIC_IRQChannel >> 0x05)]) & tmp) == tmp) - { - pendingirqstatus = SET; - } - else - { - pendingirqstatus = RESET; - } - return pendingirqstatus; -} - -/******************************************************************************* -* Function Name : NVIC_SetIRQChannelPendingBit -* Description : Sets the NVIC’s interrupt pending bit. -* Input : - NVIC_IRQChannel: specifies the interrupt pending bit to Set. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SetIRQChannelPendingBit(u8 NVIC_IRQChannel) -{ - /* Check the parameters */ - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_IRQChannel)); - - *(vu32*) 0xE000EF00 = (u32)NVIC_IRQChannel; -} - -/******************************************************************************* -* Function Name : NVIC_ClearIRQChannelPendingBit -* Description : Clears the NVIC’s interrupt pending bit. -* Input : - NVIC_IRQChannel: specifies the interrupt pending bit to clear. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_ClearIRQChannelPendingBit(u8 NVIC_IRQChannel) -{ - /* Check the parameters */ - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_IRQChannel)); - - NVIC->ICPR[(NVIC_IRQChannel >> 0x05)] = (u32)0x01 << (NVIC_IRQChannel & (u32)0x1F); -} - -/******************************************************************************* -* Function Name : NVIC_GetCurrentActiveHandler -* Description : Returns the current active Handler (IRQ Channel and -* SystemHandler) identifier. -* Input : None -* Output : None -* Return : Active Handler Identifier. -*******************************************************************************/ -u16 NVIC_GetCurrentActiveHandler(void) -{ - return ((u16)(SCB->ICSR & (u32)0x3FF)); -} - -/******************************************************************************* -* Function Name : NVIC_GetIRQChannelActiveBitStatus -* Description : Checks whether the specified IRQ Channel active bit is set -* or not. -* Input : - NVIC_IRQChannel: specifies the interrupt active bit to check. -* Output : None -* Return : The new state of IRQ Channel active bit(SET or RESET). -*******************************************************************************/ -ITStatus NVIC_GetIRQChannelActiveBitStatus(u8 NVIC_IRQChannel) -{ - ITStatus activeirqstatus = RESET; - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_IRQChannel)); - - tmp = ((u32)0x01 << (NVIC_IRQChannel & (u32)0x1F)); - - if (((NVIC->IABR[(NVIC_IRQChannel >> 0x05)]) & tmp) == tmp ) - { - activeirqstatus = SET; - } - else - { - activeirqstatus = RESET; - } - return activeirqstatus; -} - -/******************************************************************************* -* Function Name : NVIC_GetCPUID -* Description : Returns the ID number, the version number and the implementation -* details of the Cortex-M3 core. -* Input : None -* Output : None -* Return : CPU ID. -*******************************************************************************/ -u32 NVIC_GetCPUID(void) -{ - return (SCB->CPUID); -} - -/******************************************************************************* -* Function Name : NVIC_SetVectorTable -* Description : Sets the vector table location and Offset. -* Input : - NVIC_VectTab: specifies if the vector table is in RAM or -* FLASH memory. -* This parameter can be one of the following values: -* - NVIC_VectTab_RAM -* - NVIC_VectTab_FLASH -* - Offset: Vector Table base offset field. -* This value must be a multiple of 0x100. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SetVectorTable(u32 NVIC_VectTab, u32 Offset) -{ - /* Check the parameters */ - assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); - assert_param(IS_NVIC_OFFSET(Offset)); - - SCB->VTOR = NVIC_VectTab | (Offset & (u32)0x1FFFFF80); -} - -/******************************************************************************* -* Function Name : NVIC_GenerateSystemReset -* Description : Generates a system reset. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_GenerateSystemReset(void) -{ - SCB->AIRCR = AIRCR_VECTKEY_MASK | (u32)0x04; -} - -/******************************************************************************* -* Function Name : NVIC_GenerateCoreReset -* Description : Generates a Core (Core + NVIC) reset. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_GenerateCoreReset(void) -{ - SCB->AIRCR = AIRCR_VECTKEY_MASK | (u32)0x01; -} - -/******************************************************************************* -* Function Name : NVIC_SystemLPConfig -* Description : Selects the condition for the system to enter low power mode. -* Input : - LowPowerMode: Specifies the new mode for the system to enter -* low power mode. -* This parameter can be one of the following values: -* - NVIC_LP_SEVONPEND -* - NVIC_LP_SLEEPDEEP -* - NVIC_LP_SLEEPONEXIT -* - NewState: new state of LP condition. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SystemLPConfig(u8 LowPowerMode, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_NVIC_LP(LowPowerMode)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - SCB->SCR |= LowPowerMode; - } - else - { - SCB->SCR &= (u32)(~(u32)LowPowerMode); - } -} - -/******************************************************************************* -* Function Name : NVIC_SystemHandlerConfig -* Description : Enables or disables the specified System Handlers. -* Input : - SystemHandler: specifies the system handler to be enabled -* or disabled. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_UsageFault -* - NewState: new state of specified System Handlers. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SystemHandlerConfig(u32 SystemHandler, FunctionalState NewState) -{ - u32 tmpreg = 0x00; - - /* Check the parameters */ - assert_param(IS_CONFIG_SYSTEM_HANDLER(SystemHandler)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - tmpreg = (u32)0x01 << (SystemHandler & (u32)0x1F); - - if (NewState != DISABLE) - { - SCB->SHCSR |= tmpreg; - } - else - { - SCB->SHCSR &= ~tmpreg; - } -} - -/******************************************************************************* -* Function Name : NVIC_SystemHandlerPriorityConfig -* Description : Configures the specified System Handlers priority. -* Input : - SystemHandler: specifies the system handler to be -* enabled or disabled. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_UsageFault -* - SystemHandler_SVCall -* - SystemHandler_DebugMonitor -* - SystemHandler_PSV -* - SystemHandler_SysTick -* - SystemHandlerPreemptionPriority: new priority group of the -* specified system handlers. -* - SystemHandlerSubPriority: new sub priority of the specified -* system handlers. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SystemHandlerPriorityConfig(u32 SystemHandler, u8 SystemHandlerPreemptionPriority, - u8 SystemHandlerSubPriority) -{ - u32 tmp1 = 0x00, tmp2 = 0xFF, handlermask = 0x00; - u32 tmppriority = 0x00; - - /* Check the parameters */ - assert_param(IS_PRIORITY_SYSTEM_HANDLER(SystemHandler)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(SystemHandlerPreemptionPriority)); - assert_param(IS_NVIC_SUB_PRIORITY(SystemHandlerSubPriority)); - - tmppriority = (0x700 - (SCB->AIRCR & (u32)0x700))>> 0x08; - tmp1 = (0x4 - tmppriority); - tmp2 = tmp2 >> tmppriority; - - tmppriority = (u32)SystemHandlerPreemptionPriority << tmp1; - tmppriority |= SystemHandlerSubPriority & tmp2; - - tmppriority = tmppriority << 0x04; - tmp1 = SystemHandler & (u32)0xC0; - tmp1 = tmp1 >> 0x06; - tmp2 = (SystemHandler >> 0x08) & (u32)0x03; - tmppriority = tmppriority << (tmp2 * 0x08); - handlermask = (u32)0xFF << (tmp2 * 0x08); - - SCB->SHPR[tmp1] &= ~handlermask; - SCB->SHPR[tmp1] |= tmppriority; -} - -/******************************************************************************* -* Function Name : NVIC_GetSystemHandlerPendingBitStatus -* Description : Checks whether the specified System handlers pending bit is -* set or not. -* Input : - SystemHandler: specifies the system handler pending bit to -* check. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_SVCall -* Output : None -* Return : The new state of System Handler pending bit(SET or RESET). -*******************************************************************************/ -ITStatus NVIC_GetSystemHandlerPendingBitStatus(u32 SystemHandler) -{ - ITStatus bitstatus = RESET; - u32 tmp = 0x00, tmppos = 0x00; - - /* Check the parameters */ - assert_param(IS_GET_PENDING_SYSTEM_HANDLER(SystemHandler)); - - tmppos = (SystemHandler >> 0x0A); - tmppos &= (u32)0x0F; - - tmppos = (u32)0x01 << tmppos; - - tmp = SCB->SHCSR & tmppos; - - if (tmp == tmppos) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : NVIC_SetSystemHandlerPendingBit -* Description : Sets System Handler pending bit. -* Input : - SystemHandler: specifies the system handler pending bit -* to be set. -* This parameter can be one of the following values: -* - SystemHandler_NMI -* - SystemHandler_PSV -* - SystemHandler_SysTick -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SetSystemHandlerPendingBit(u32 SystemHandler) -{ - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_SET_PENDING_SYSTEM_HANDLER(SystemHandler)); - - /* Get the System Handler pending bit position */ - tmp = SystemHandler & (u32)0x1F; - /* Set the corresponding System Handler pending bit */ - SCB->ICSR |= ((u32)0x01 << tmp); -} - -/******************************************************************************* -* Function Name : NVIC_ClearSystemHandlerPendingBit -* Description : Clears System Handler pending bit. -* Input : - SystemHandler: specifies the system handler pending bit to -* be clear. -* This parameter can be one of the following values: -* - SystemHandler_PSV -* - SystemHandler_SysTick -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_ClearSystemHandlerPendingBit(u32 SystemHandler) -{ - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_CLEAR_SYSTEM_HANDLER(SystemHandler)); - - /* Get the System Handler pending bit position */ - tmp = SystemHandler & (u32)0x1F; - /* Clear the corresponding System Handler pending bit */ - SCB->ICSR |= ((u32)0x01 << (tmp - 0x01)); -} - -/******************************************************************************* -* Function Name : NVIC_GetSystemHandlerActiveBitStatus -* Description : Checks whether the specified System handlers active bit is -* set or not. -* Input : - SystemHandler: specifies the system handler active bit to -* check. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_UsageFault -* - SystemHandler_SVCall -* - SystemHandler_DebugMonitor -* - SystemHandler_PSV -* - SystemHandler_SysTick -* Output : None -* Return : The new state of System Handler active bit(SET or RESET). -*******************************************************************************/ -ITStatus NVIC_GetSystemHandlerActiveBitStatus(u32 SystemHandler) -{ - ITStatus bitstatus = RESET; - - u32 tmp = 0x00, tmppos = 0x00; - - /* Check the parameters */ - assert_param(IS_GET_ACTIVE_SYSTEM_HANDLER(SystemHandler)); - - tmppos = (SystemHandler >> 0x0E) & (u32)0x0F; - - tmppos = (u32)0x01 << tmppos; - - tmp = SCB->SHCSR & tmppos; - - if (tmp == tmppos) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : NVIC_GetFaultHandlerSources -* Description : Returns the system fault handlers sources. -* Input : - SystemHandler: specifies the system handler to get its fault -* sources. -* This parameter can be one of the following values: -* - SystemHandler_HardFault -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_UsageFault -* - SystemHandler_DebugMonitor -* Output : None -* Return : Source of the fault handler. -*******************************************************************************/ -u32 NVIC_GetFaultHandlerSources(u32 SystemHandler) -{ - u32 faultsources = 0x00; - u32 tmpreg = 0x00, tmppos = 0x00; - - /* Check the parameters */ - assert_param(IS_FAULT_SOURCE_SYSTEM_HANDLER(SystemHandler)); - - tmpreg = (SystemHandler >> 0x12) & (u32)0x03; - tmppos = (SystemHandler >> 0x14) & (u32)0x03; - - if (tmpreg == 0x00) - { - faultsources = SCB->HFSR; - } - else if (tmpreg == 0x01) - { - faultsources = SCB->CFSR >> (tmppos * 0x08); - if (tmppos != 0x02) - { - faultsources &= (u32)0x0F; - } - else - { - faultsources &= (u32)0xFF; - } - } - else - { - faultsources = SCB->DFSR; - } - return faultsources; -} - -/******************************************************************************* -* Function Name : NVIC_GetFaultAddress -* Description : Returns the address of the location that generated a fault -* handler. -* Input : - SystemHandler: specifies the system handler to get its -* fault address. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* Output : None -* Return : Fault address. -*******************************************************************************/ -u32 NVIC_GetFaultAddress(u32 SystemHandler) -{ - u32 faultaddress = 0x00; - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_FAULT_ADDRESS_SYSTEM_HANDLER(SystemHandler)); - - tmp = (SystemHandler >> 0x16) & (u32)0x01; - - if (tmp == 0x00) - { - faultaddress = SCB->MMFAR; - } - else - { - faultaddress = SCB->BFAR; - } - return faultaddress; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_pwr.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_pwr.c deleted file mode 100755 index fb8fca2..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_pwr.c +++ /dev/null @@ -1,280 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_pwr.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the PWR firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_pwr.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* --------- PWR registers bit address in the alias region ---------- */ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ -/* Alias word address of DBP bit */ -#define CR_OFFSET (PWR_OFFSET + 0x00) -#define DBP_BitNumber 0x08 -#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4)) - -/* Alias word address of PVDE bit */ -#define PVDE_BitNumber 0x04 -#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4)) - -/* --- CSR Register ---*/ -/* Alias word address of EWUP bit */ -#define CSR_OFFSET (PWR_OFFSET + 0x04) -#define EWUP_BitNumber 0x08 -#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4)) - -/* ------------------ PWR registers bit mask ------------------------ */ -/* CR register bit mask */ -#define CR_PDDS_Set ((u32)0x00000002) -#define CR_DS_Mask ((u32)0xFFFFFFFC) -#define CR_CWUF_Set ((u32)0x00000004) -#define CR_PLS_Mask ((u32)0xFFFFFF1F) - -/* --------- Cortex System Control register bit mask ---------------- */ -/* Cortex System Control register address */ -#define SCB_SysCtrl ((u32)0xE000ED10) -/* SLEEPDEEP bit mask */ -#define SysCtrl_SLEEPDEEP_Set ((u32)0x00000004) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : PWR_DeInit -* Description : Deinitializes the PWR peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PWR_DeInit(void) -{ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); -} - -/******************************************************************************* -* Function Name : PWR_BackupAccessCmd -* Description : Enables or disables access to the RTC and backup registers. -* Input : - NewState: new state of the access to the RTC and backup -* registers. This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void PWR_BackupAccessCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_DBP_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : PWR_PVDCmd -* Description : Enables or disables the Power Voltage Detector(PVD). -* Input : - NewState: new state of the PVD. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void PWR_PVDCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_PVDE_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : PWR_PVDLevelConfig -* Description : Configures the voltage threshold detected by the Power Voltage -* Detector(PVD). -* Input : - PWR_PVDLevel: specifies the PVD detection level -* This parameter can be one of the following values: -* - PWR_PVDLevel_2V2: PVD detection level set to 2.2V -* - PWR_PVDLevel_2V3: PVD detection level set to 2.3V -* - PWR_PVDLevel_2V4: PVD detection level set to 2.4V -* - PWR_PVDLevel_2V5: PVD detection level set to 2.5V -* - PWR_PVDLevel_2V6: PVD detection level set to 2.6V -* - PWR_PVDLevel_2V7: PVD detection level set to 2.7V -* - PWR_PVDLevel_2V8: PVD detection level set to 2.8V -* - PWR_PVDLevel_2V9: PVD detection level set to 2.9V -* Output : None -* Return : None -*******************************************************************************/ -void PWR_PVDLevelConfig(u32 PWR_PVDLevel) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); - - tmpreg = PWR->CR; - - /* Clear PLS[7:5] bits */ - tmpreg &= CR_PLS_Mask; - - /* Set PLS[7:5] bits according to PWR_PVDLevel value */ - tmpreg |= PWR_PVDLevel; - - /* Store the new value */ - PWR->CR = tmpreg; -} - -/******************************************************************************* -* Function Name : PWR_WakeUpPinCmd -* Description : Enables or disables the WakeUp Pin functionality. -* Input : - NewState: new state of the WakeUp Pin functionality. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void PWR_WakeUpPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CSR_EWUP_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : PWR_EnterSTOPMode -* Description : Enters STOP mode. -* Input : - PWR_Regulator: specifies the regulator state in STOP mode. -* This parameter can be one of the following values: -* - PWR_Regulator_ON: STOP mode with regulator ON -* - PWR_Regulator_LowPower: STOP mode with -* regulator in low power mode -* - PWR_STOPEntry: specifies if STOP mode in entered with WFI or -* WFE instruction. -* This parameter can be one of the following values: -* - PWR_STOPEntry_WFI: enter STOP mode with WFI instruction -* - PWR_STOPEntry_WFE: enter STOP mode with WFE instruction -* Output : None -* Return : None -*******************************************************************************/ -void PWR_EnterSTOPMode(u32 PWR_Regulator, u8 PWR_STOPEntry) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(PWR_Regulator)); - assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); - - /* Select the regulator state in STOP mode ---------------------------------*/ - tmpreg = PWR->CR; - - /* Clear PDDS and LPDS bits */ - tmpreg &= CR_DS_Mask; - - /* Set LPDS bit according to PWR_Regulator value */ - tmpreg |= PWR_Regulator; - - /* Store the new value */ - PWR->CR = tmpreg; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - *(vu32 *) SCB_SysCtrl |= SysCtrl_SLEEPDEEP_Set; - - /* Select STOP mode entry --------------------------------------------------*/ - if(PWR_STOPEntry == PWR_STOPEntry_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } -} - -/******************************************************************************* -* Function Name : PWR_EnterSTANDBYMode -* Description : Enters STANDBY mode. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PWR_EnterSTANDBYMode(void) -{ - /* Clear Wake-up flag */ - PWR->CR |= CR_CWUF_Set; - - /* Select STANDBY mode */ - PWR->CR |= CR_PDDS_Set; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - *(vu32 *) SCB_SysCtrl |= SysCtrl_SLEEPDEEP_Set; - - /* Request Wait For Interrupt */ - __WFI(); -} - -/******************************************************************************* -* Function Name : PWR_GetFlagStatus -* Description : Checks whether the specified PWR flag is set or not. -* Input : - PWR_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - PWR_FLAG_WU: Wake Up flag -* - PWR_FLAG_SB: StandBy flag -* - PWR_FLAG_PVDO: PVD Output -* Output : None -* Return : The new state of PWR_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus PWR_GetFlagStatus(u32 PWR_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); - - if ((PWR->CSR & PWR_FLAG) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the flag status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : PWR_ClearFlag -* Description : Clears the PWR's pending flags. -* Input : - PWR_FLAG: specifies the flag to clear. -* This parameter can be one of the following values: -* - PWR_FLAG_WU: Wake Up flag -* - PWR_FLAG_SB: StandBy flag -* Output : None -* Return : None -*******************************************************************************/ -void PWR_ClearFlag(u32 PWR_FLAG) -{ - /* Check the parameters */ - assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); - - PWR->CR |= PWR_FLAG << 2; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_rcc.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_rcc.c deleted file mode 100755 index 4d774da..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_rcc.c +++ /dev/null @@ -1,1104 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_rcc.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the RCC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ------------ RCC registers bit address in the alias region ----------- */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ -/* Alias word address of HSION bit */ -#define CR_OFFSET (RCC_OFFSET + 0x00) -#define HSION_BitNumber 0x00 -#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) - -/* Alias word address of PLLON bit */ -#define PLLON_BitNumber 0x18 -#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) - -/* Alias word address of CSSON bit */ -#define CSSON_BitNumber 0x13 -#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) - -/* --- CFGR Register ---*/ -/* Alias word address of USBPRE bit */ -#define CFGR_OFFSET (RCC_OFFSET + 0x04) -#define USBPRE_BitNumber 0x16 -#define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4)) - -/* --- BDCR Register ---*/ -/* Alias word address of RTCEN bit */ -#define BDCR_OFFSET (RCC_OFFSET + 0x20) -#define RTCEN_BitNumber 0x0F -#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) - -/* Alias word address of BDRST bit */ -#define BDRST_BitNumber 0x10 -#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) - -/* --- CSR Register ---*/ -/* Alias word address of LSION bit */ -#define CSR_OFFSET (RCC_OFFSET + 0x24) -#define LSION_BitNumber 0x00 -#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) - -/* ---------------------- RCC registers bit mask ------------------------ */ -/* CR register bit mask */ -#define CR_HSEBYP_Reset ((u32)0xFFFBFFFF) -#define CR_HSEBYP_Set ((u32)0x00040000) -#define CR_HSEON_Reset ((u32)0xFFFEFFFF) -#define CR_HSEON_Set ((u32)0x00010000) -#define CR_HSITRIM_Mask ((u32)0xFFFFFF07) - -/* CFGR register bit mask */ -#define CFGR_PLL_Mask ((u32)0xFFC0FFFF) -#define CFGR_PLLMull_Mask ((u32)0x003C0000) -#define CFGR_PLLSRC_Mask ((u32)0x00010000) -#define CFGR_PLLXTPRE_Mask ((u32)0x00020000) -#define CFGR_SWS_Mask ((u32)0x0000000C) -#define CFGR_SW_Mask ((u32)0xFFFFFFFC) -#define CFGR_HPRE_Reset_Mask ((u32)0xFFFFFF0F) -#define CFGR_HPRE_Set_Mask ((u32)0x000000F0) -#define CFGR_PPRE1_Reset_Mask ((u32)0xFFFFF8FF) -#define CFGR_PPRE1_Set_Mask ((u32)0x00000700) -#define CFGR_PPRE2_Reset_Mask ((u32)0xFFFFC7FF) -#define CFGR_PPRE2_Set_Mask ((u32)0x00003800) -#define CFGR_ADCPRE_Reset_Mask ((u32)0xFFFF3FFF) -#define CFGR_ADCPRE_Set_Mask ((u32)0x0000C000) - -/* CSR register bit mask */ -#define CSR_RMVF_Set ((u32)0x01000000) - -/* RCC Flag Mask */ -#define FLAG_Mask ((u8)0x1F) - -/* Typical Value of the HSI in Hz */ -#define HSI_Value ((u32)8000000) - -/* CIR register byte 2 (Bits[15:8]) base address */ -#define CIR_BYTE2_ADDRESS ((u32)0x40021009) -/* CIR register byte 3 (Bits[23:16]) base address */ -#define CIR_BYTE3_ADDRESS ((u32)0x4002100A) - -/* CFGR register byte 4 (Bits[31:24]) base address */ -#define CFGR_BYTE4_ADDRESS ((u32)0x40021007) - -/* BDCR register base address */ -#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) - -/* Time out for HSE start up */ -#define HSEStartUp_TimeOut ((u16)0x01FF) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -static uc8 APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; -static uc8 ADCPrescTable[4] = {2, 4, 6, 8}; - -static volatile FlagStatus HSEStatus; -static vu32 StartUpCounter = 0; - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : RCC_DeInit -* Description : Resets the RCC clock configuration to the default reset state. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_DeInit(void) -{ - /* Set HSION bit */ - RCC->CR |= (u32)0x00000001; - - /* Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], ADCPRE[1:0] and MCO[2:0] bits */ - RCC->CFGR &= (u32)0xF8FF0000; - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (u32)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (u32)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL[3:0] and USBPRE bits */ - RCC->CFGR &= (u32)0xFF80FFFF; - - /* Disable all interrupts */ - RCC->CIR = 0x00000000; -} - -/******************************************************************************* -* Function Name : RCC_HSEConfig -* Description : Configures the External High Speed oscillator (HSE). -* HSE can not be stopped if it is used directly or through the -* PLL as system clock. -* Input : - RCC_HSE: specifies the new state of the HSE. -* This parameter can be one of the following values: -* - RCC_HSE_OFF: HSE oscillator OFF -* - RCC_HSE_ON: HSE oscillator ON -* - RCC_HSE_Bypass: HSE oscillator bypassed with external -* clock -* Output : None -* Return : None -*******************************************************************************/ -void RCC_HSEConfig(u32 RCC_HSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_HSE)); - - /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ - /* Reset HSEON bit */ - RCC->CR &= CR_HSEON_Reset; - - /* Reset HSEBYP bit */ - RCC->CR &= CR_HSEBYP_Reset; - - /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */ - switch(RCC_HSE) - { - case RCC_HSE_ON: - /* Set HSEON bit */ - RCC->CR |= CR_HSEON_Set; - break; - - case RCC_HSE_Bypass: - /* Set HSEBYP and HSEON bits */ - RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : RCC_WaitForHSEStartUp -* Description : Waits for HSE start-up. -* Input : None -* Output : None -* Return : An ErrorStatus enumuration value: -* - SUCCESS: HSE oscillator is stable and ready to use -* - ERROR: HSE oscillator not yet ready -*******************************************************************************/ -ErrorStatus RCC_WaitForHSEStartUp(void) -{ - ErrorStatus status = ERROR; - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); - StartUpCounter++; - } while((HSEStatus == RESET) && (StartUpCounter != HSEStartUp_TimeOut)); - - - if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) - { - status = SUCCESS; - } - else - { - status = ERROR; - } - - return (status); -} - -/******************************************************************************* -* Function Name : RCC_AdjustHSICalibrationValue -* Description : Adjusts the Internal High Speed oscillator (HSI) calibration -* value. -* Input : - HSICalibrationValue: specifies the calibration trimming value. -* This parameter must be a number between 0 and 0x1F. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_AdjustHSICalibrationValue(u8 HSICalibrationValue) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); - - tmpreg = RCC->CR; - - /* Clear HSITRIM[4:0] bits */ - tmpreg &= CR_HSITRIM_Mask; - - /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ - tmpreg |= (u32)HSICalibrationValue << 3; - - /* Store the new value */ - RCC->CR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_HSICmd -* Description : Enables or disables the Internal High Speed oscillator (HSI). -* HSI can not be stopped if it is used directly or through the -* PLL as system clock. -* Input : - NewState: new state of the HSI. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_HSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_HSION_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_PLLConfig -* Description : Configures the PLL clock source and multiplication factor. -* This function must be used only when the PLL is disabled. -* Input : - RCC_PLLSource: specifies the PLL entry clock source. -* This parameter can be one of the following values: -* - RCC_PLLSource_HSI_Div2: HSI oscillator clock divided -* by 2 selected as PLL clock entry -* - RCC_PLLSource_HSE_Div1: HSE oscillator clock selected -* as PLL clock entry -* - RCC_PLLSource_HSE_Div2: HSE oscillator clock divided -* by 2 selected as PLL clock entry -* - RCC_PLLMul: specifies the PLL multiplication factor. -* This parameter can be RCC_PLLMul_x where x:[2,16] -* Output : None -* Return : None -*******************************************************************************/ -void RCC_PLLConfig(u32 RCC_PLLSource, u32 RCC_PLLMul) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); - assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); - - tmpreg = RCC->CFGR; - - /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ - tmpreg &= CFGR_PLL_Mask; - - /* Set the PLL configuration bits */ - tmpreg |= RCC_PLLSource | RCC_PLLMul; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_PLLCmd -* Description : Enables or disables the PLL. -* The PLL can not be disabled if it is used as system clock. -* Input : - NewState: new state of the PLL. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_PLLCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_PLLON_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_SYSCLKConfig -* Description : Configures the system clock (SYSCLK). -* Input : - RCC_SYSCLKSource: specifies the clock source used as system -* clock. This parameter can be one of the following values: -* - RCC_SYSCLKSource_HSI: HSI selected as system clock -* - RCC_SYSCLKSource_HSE: HSE selected as system clock -* - RCC_SYSCLKSource_PLLCLK: PLL selected as system clock -* Output : None -* Return : None -*******************************************************************************/ -void RCC_SYSCLKConfig(u32 RCC_SYSCLKSource) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); - - tmpreg = RCC->CFGR; - - /* Clear SW[1:0] bits */ - tmpreg &= CFGR_SW_Mask; - - /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ - tmpreg |= RCC_SYSCLKSource; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_GetSYSCLKSource -* Description : Returns the clock source used as system clock. -* Input : None -* Output : None -* Return : The clock source used as system clock. The returned value can -* be one of the following: -* - 0x00: HSI used as system clock -* - 0x04: HSE used as system clock -* - 0x08: PLL used as system clock -*******************************************************************************/ -u8 RCC_GetSYSCLKSource(void) -{ - return ((u8)(RCC->CFGR & CFGR_SWS_Mask)); -} - -/******************************************************************************* -* Function Name : RCC_HCLKConfig -* Description : Configures the AHB clock (HCLK). -* Input : - RCC_SYSCLK: defines the AHB clock divider. This clock is -* derived from the system clock (SYSCLK). -* This parameter can be one of the following values: -* - RCC_SYSCLK_Div1: AHB clock = SYSCLK -* - RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 -* - RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 -* - RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 -* - RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 -* - RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 -* - RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 -* - RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 -* - RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 -* Output : None -* Return : None -*******************************************************************************/ -void RCC_HCLKConfig(u32 RCC_SYSCLK) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_HCLK(RCC_SYSCLK)); - - tmpreg = RCC->CFGR; - - /* Clear HPRE[3:0] bits */ - tmpreg &= CFGR_HPRE_Reset_Mask; - - /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ - tmpreg |= RCC_SYSCLK; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_PCLK1Config -* Description : Configures the Low Speed APB clock (PCLK1). -* Input : - RCC_HCLK: defines the APB1 clock divider. This clock is -* derived from the AHB clock (HCLK). -* This parameter can be one of the following values: -* - RCC_HCLK_Div1: APB1 clock = HCLK -* - RCC_HCLK_Div2: APB1 clock = HCLK/2 -* - RCC_HCLK_Div4: APB1 clock = HCLK/4 -* - RCC_HCLK_Div8: APB1 clock = HCLK/8 -* - RCC_HCLK_Div16: APB1 clock = HCLK/16 -* Output : None -* Return : None -*******************************************************************************/ -void RCC_PCLK1Config(u32 RCC_HCLK) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - - tmpreg = RCC->CFGR; - - /* Clear PPRE1[2:0] bits */ - tmpreg &= CFGR_PPRE1_Reset_Mask; - - /* Set PPRE1[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_PCLK2Config -* Description : Configures the High Speed APB clock (PCLK2). -* Input : - RCC_HCLK: defines the APB2 clock divider. This clock is -* derived from the AHB clock (HCLK). -* This parameter can be one of the following values: -* - RCC_HCLK_Div1: APB2 clock = HCLK -* - RCC_HCLK_Div2: APB2 clock = HCLK/2 -* - RCC_HCLK_Div4: APB2 clock = HCLK/4 -* - RCC_HCLK_Div8: APB2 clock = HCLK/8 -* - RCC_HCLK_Div16: APB2 clock = HCLK/16 -* Output : None -* Return : None -*******************************************************************************/ -void RCC_PCLK2Config(u32 RCC_HCLK) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - - tmpreg = RCC->CFGR; - - /* Clear PPRE2[2:0] bits */ - tmpreg &= CFGR_PPRE2_Reset_Mask; - - /* Set PPRE2[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK << 3; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_ITConfig -* Description : Enables or disables the specified RCC interrupts. -* Input : - RCC_IT: specifies the RCC interrupt sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - RCC_IT_LSIRDY: LSI ready interrupt -* - RCC_IT_LSERDY: LSE ready interrupt -* - RCC_IT_HSIRDY: HSI ready interrupt -* - RCC_IT_HSERDY: HSE ready interrupt -* - RCC_IT_PLLRDY: PLL ready interrupt -* - NewState: new state of the specified RCC interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ITConfig(u8 RCC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_IT(RCC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Perform Byte access to RCC_CIR[12:8] bits to enable the selected interrupts */ - *(vu8 *) CIR_BYTE2_ADDRESS |= RCC_IT; - } - else - { - /* Perform Byte access to RCC_CIR[12:8] bits to disable the selected interrupts */ - *(vu8 *) CIR_BYTE2_ADDRESS &= (u8)~RCC_IT; - } -} - -/******************************************************************************* -* Function Name : RCC_USBCLKConfig -* Description : Configures the USB clock (USBCLK). -* Input : - RCC_USBCLKSource: specifies the USB clock source. This clock -* is derived from the PLL output. -* This parameter can be one of the following values: -* - RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 -* selected as USB clock source -* - RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB -* clock source -* Output : None -* Return : None -*******************************************************************************/ -void RCC_USBCLKConfig(u32 RCC_USBCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); - - *(vu32 *) CFGR_USBPRE_BB = RCC_USBCLKSource; -} - -/******************************************************************************* -* Function Name : RCC_ADCCLKConfig -* Description : Configures the ADC clock (ADCCLK). -* Input : - RCC_PCLK2: defines the ADC clock divider. This clock is -* derived from the APB2 clock (PCLK2). -* This parameter can be one of the following values: -* - RCC_PCLK2_Div2: ADC clock = PCLK2/2 -* - RCC_PCLK2_Div4: ADC clock = PCLK2/4 -* - RCC_PCLK2_Div6: ADC clock = PCLK2/6 -* - RCC_PCLK2_Div8: ADC clock = PCLK2/8 -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ADCCLKConfig(u32 RCC_PCLK2) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); - - tmpreg = RCC->CFGR; - - /* Clear ADCPRE[1:0] bits */ - tmpreg &= CFGR_ADCPRE_Reset_Mask; - - /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */ - tmpreg |= RCC_PCLK2; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_LSEConfig -* Description : Configures the External Low Speed oscillator (LSE). -* Input : - RCC_LSE: specifies the new state of the LSE. -* This parameter can be one of the following values: -* - RCC_LSE_OFF: LSE oscillator OFF -* - RCC_LSE_ON: LSE oscillator ON -* - RCC_LSE_Bypass: LSE oscillator bypassed with external -* clock -* Output : None -* Return : None -*******************************************************************************/ -void RCC_LSEConfig(u8 RCC_LSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_LSE)); - - /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ - /* Reset LSEON bit */ - *(vu8 *) BDCR_ADDRESS = RCC_LSE_OFF; - - /* Reset LSEBYP bit */ - *(vu8 *) BDCR_ADDRESS = RCC_LSE_OFF; - - /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ - switch(RCC_LSE) - { - case RCC_LSE_ON: - /* Set LSEON bit */ - *(vu8 *) BDCR_ADDRESS = RCC_LSE_ON; - break; - - case RCC_LSE_Bypass: - /* Set LSEBYP and LSEON bits */ - *(vu8 *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : RCC_LSICmd -* Description : Enables or disables the Internal Low Speed oscillator (LSI). -* LSI can not be disabled if the IWDG is running. -* Input : - NewState: new state of the LSI. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_LSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CSR_LSION_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_RTCCLKConfig -* Description : Configures the RTC clock (RTCCLK). -* Once the RTC clock is selected it can’t be changed unless the -* Backup domain is reset. -* Input : - RCC_RTCCLKSource: specifies the RTC clock source. -* This parameter can be one of the following values: -* - RCC_RTCCLKSource_LSE: LSE selected as RTC clock -* - RCC_RTCCLKSource_LSI: LSI selected as RTC clock -* - RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 -* selected as RTC clock -* Output : None -* Return : None -*******************************************************************************/ -void RCC_RTCCLKConfig(u32 RCC_RTCCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); - - /* Select the RTC clock source */ - RCC->BDCR |= RCC_RTCCLKSource; -} - -/******************************************************************************* -* Function Name : RCC_RTCCLKCmd -* Description : Enables or disables the RTC clock. -* This function must be used only after the RTC clock was -* selected using the RCC_RTCCLKConfig function. -* Input : - NewState: new state of the RTC clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_RTCCLKCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) BDCR_RTCEN_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_GetClocksFreq -* Description : Returns the frequencies of different on chip clocks. -* Input : - RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which -* will hold the clocks frequencies. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) -{ - u32 tmp = 0, pllmull = 0, pllsource = 0, presc = 0; - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & CFGR_SWS_Mask; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - RCC_Clocks->SYSCLK_Frequency = HSI_Value; - break; - - case 0x04: /* HSE used as system clock */ - RCC_Clocks->SYSCLK_Frequency = HSE_Value; - break; - - case 0x08: /* PLL used as system clock */ - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & CFGR_PLLMull_Mask; - pllmull = ( pllmull >> 18) + 2; - - pllsource = RCC->CFGR & CFGR_PLLSRC_Mask; - - if (pllsource == 0x00) - {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ - RCC_Clocks->SYSCLK_Frequency = (HSI_Value >> 1) * pllmull; - } - else - {/* HSE selected as PLL clock entry */ - - if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (u32)RESET) - {/* HSE oscillator clock divided by 2 */ - - RCC_Clocks->SYSCLK_Frequency = (HSE_Value >> 1) * pllmull; - } - else - { - RCC_Clocks->SYSCLK_Frequency = HSE_Value * pllmull; - } - } - break; - - default: - RCC_Clocks->SYSCLK_Frequency = HSI_Value; - break; - } - - /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/ - /* Get HCLK prescaler */ - tmp = RCC->CFGR & CFGR_HPRE_Set_Mask; - tmp = tmp >> 4; - presc = APBAHBPrescTable[tmp]; - - /* HCLK clock frequency */ - RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; - - /* Get PCLK1 prescaler */ - tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask; - tmp = tmp >> 8; - presc = APBAHBPrescTable[tmp]; - - /* PCLK1 clock frequency */ - RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; - - /* Get PCLK2 prescaler */ - tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask; - tmp = tmp >> 11; - presc = APBAHBPrescTable[tmp]; - - /* PCLK2 clock frequency */ - RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; - - /* Get ADCCLK prescaler */ - tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask; - tmp = tmp >> 14; - presc = ADCPrescTable[tmp]; - - /* ADCCLK clock frequency */ - RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; -} - -/******************************************************************************* -* Function Name : RCC_AHBPeriphClockCmd -* Description : Enables or disables the AHB peripheral clock. -* Input : - RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. -* This parameter can be any combination of the following values: -* - RCC_AHBPeriph_DMA1 -* - RCC_AHBPeriph_DMA2 -* - RCC_AHBPeriph_SRAM -* - RCC_AHBPeriph_FLITF -* - RCC_AHBPeriph_CRC -* - RCC_AHBPeriph_FSMC -* - RCC_AHBPeriph_SDIO -* SRAM and FLITF clock can be disabled only during sleep mode. -* - NewState: new state of the specified peripheral clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_AHBPeriphClockCmd(u32 RCC_AHBPeriph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHBENR |= RCC_AHBPeriph; - } - else - { - RCC->AHBENR &= ~RCC_AHBPeriph; - } -} - -/******************************************************************************* -* Function Name : RCC_APB2PeriphClockCmd -* Description : Enables or disables the High Speed APB (APB2) peripheral clock. -* Input : - RCC_APB2Periph: specifies the APB2 peripheral to gates its -* clock. -* This parameter can be any combination of the following values: -* - RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, -* RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, -* RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, -* RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, -* RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, -* RCC_APB2Periph_ALL -* - NewState: new state of the specified peripheral clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_APB2PeriphClockCmd(u32 RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB2ENR |= RCC_APB2Periph; - } - else - { - RCC->APB2ENR &= ~RCC_APB2Periph; - } -} - -/******************************************************************************* -* Function Name : RCC_APB1PeriphClockCmd -* Description : Enables or disables the Low Speed APB (APB1) peripheral clock. -* Input : - RCC_APB1Periph: specifies the APB1 peripheral to gates its -* clock. -* This parameter can be any combination of the following values: -* - RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, -* RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, -* RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, -* RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, -* RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, -* RCC_APB1Periph_USB, RCC_APB1Periph_CAN, RCC_APB1Periph_BKP, -* RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL -* - NewState: new state of the specified peripheral clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_APB1PeriphClockCmd(u32 RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB1ENR |= RCC_APB1Periph; - } - else - { - RCC->APB1ENR &= ~RCC_APB1Periph; - } -} - -/******************************************************************************* -* Function Name : RCC_APB2PeriphResetCmd -* Description : Forces or releases High Speed APB (APB2) peripheral reset. -* Input : - RCC_APB2Periph: specifies the APB2 peripheral to reset. -* This parameter can be any combination of the following values: -* - RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, -* RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, -* RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, -* RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, -* RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, -* RCC_APB2Periph_ALL -* - NewState: new state of the specified peripheral reset. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_APB2PeriphResetCmd(u32 RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB2RSTR |= RCC_APB2Periph; - } - else - { - RCC->APB2RSTR &= ~RCC_APB2Periph; - } -} - -/******************************************************************************* -* Function Name : RCC_APB1PeriphResetCmd -* Description : Forces or releases Low Speed APB (APB1) peripheral reset. -* Input : - RCC_APB1Periph: specifies the APB1 peripheral to reset. -* This parameter can be any combination of the following values: -* - RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, -* RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, -* RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, -* RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, -* RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, -* RCC_APB1Periph_USB, RCC_APB1Periph_CAN, RCC_APB1Periph_BKP, -* RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL -* - NewState: new state of the specified peripheral clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_APB1PeriphResetCmd(u32 RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB1RSTR |= RCC_APB1Periph; - } - else - { - RCC->APB1RSTR &= ~RCC_APB1Periph; - } -} - -/******************************************************************************* -* Function Name : RCC_BackupResetCmd -* Description : Forces or releases the Backup domain reset. -* Input : - NewState: new state of the Backup domain reset. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_BackupResetCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) BDCR_BDRST_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_ClockSecuritySystemCmd -* Description : Enables or disables the Clock Security System. -* Input : - NewState: new state of the Clock Security System.. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ClockSecuritySystemCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_CSSON_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_MCOConfig -* Description : Selects the clock source to output on MCO pin. -* Input : - RCC_MCO: specifies the clock source to output. -* This parameter can be one of the following values: -* - RCC_MCO_NoClock: No clock selected -* - RCC_MCO_SYSCLK: System clock selected -* - RCC_MCO_HSI: HSI oscillator clock selected -* - RCC_MCO_HSE: HSE oscillator clock selected -* - RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected -* Output : None -* Return : None -*******************************************************************************/ -void RCC_MCOConfig(u8 RCC_MCO) -{ - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCO)); - - /* Perform Byte access to MCO[2:0] bits to select the MCO source */ - *(vu8 *) CFGR_BYTE4_ADDRESS = RCC_MCO; -} - -/******************************************************************************* -* Function Name : RCC_GetFlagStatus -* Description : Checks whether the specified RCC flag is set or not. -* Input : - RCC_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - RCC_FLAG_HSIRDY: HSI oscillator clock ready -* - RCC_FLAG_HSERDY: HSE oscillator clock ready -* - RCC_FLAG_PLLRDY: PLL clock ready -* - RCC_FLAG_LSERDY: LSE oscillator clock ready -* - RCC_FLAG_LSIRDY: LSI oscillator clock ready -* - RCC_FLAG_PINRST: Pin reset -* - RCC_FLAG_PORRST: POR/PDR reset -* - RCC_FLAG_SFTRST: Software reset -* - RCC_FLAG_IWDGRST: Independent Watchdog reset -* - RCC_FLAG_WWDGRST: Window Watchdog reset -* - RCC_FLAG_LPWRRST: Low Power reset -* Output : None -* Return : The new state of RCC_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus RCC_GetFlagStatus(u8 RCC_FLAG) -{ - u32 tmp = 0; - u32 statusreg = 0; - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_FLAG(RCC_FLAG)); - - /* Get the RCC register index */ - tmp = RCC_FLAG >> 5; - - if (tmp == 1) /* The flag to check is in CR register */ - { - statusreg = RCC->CR; - } - else if (tmp == 2) /* The flag to check is in BDCR register */ - { - statusreg = RCC->BDCR; - } - else /* The flag to check is in CSR register */ - { - statusreg = RCC->CSR; - } - - /* Get the flag position */ - tmp = RCC_FLAG & FLAG_Mask; - - if ((statusreg & ((u32)1 << tmp)) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the flag status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : RCC_ClearFlag -* Description : Clears the RCC reset flags. -* The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, -* RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, -* RCC_FLAG_LPWRRST -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ClearFlag(void) -{ - /* Set RMVF bit to clear the reset flags */ - RCC->CSR |= CSR_RMVF_Set; -} - -/******************************************************************************* -* Function Name : RCC_GetITStatus -* Description : Checks whether the specified RCC interrupt has occurred or not. -* Input : - RCC_IT: specifies the RCC interrupt source to check. -* This parameter can be one of the following values: -* - RCC_IT_LSIRDY: LSI ready interrupt -* - RCC_IT_LSERDY: LSE ready interrupt -* - RCC_IT_HSIRDY: HSI ready interrupt -* - RCC_IT_HSERDY: HSE ready interrupt -* - RCC_IT_PLLRDY: PLL ready interrupt -* - RCC_IT_CSS: Clock Security System interrupt -* Output : None -* Return : The new state of RCC_IT (SET or RESET). -*******************************************************************************/ -ITStatus RCC_GetITStatus(u8 RCC_IT) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_GET_IT(RCC_IT)); - - /* Check the status of the specified RCC interrupt */ - if ((RCC->CIR & RCC_IT) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the RCC_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : RCC_ClearITPendingBit -* Description : Clears the RCC’s interrupt pending bits. -* Input : - RCC_IT: specifies the interrupt pending bit to clear. -* This parameter can be any combination of the following values: -* - RCC_IT_LSIRDY: LSI ready interrupt -* - RCC_IT_LSERDY: LSE ready interrupt -* - RCC_IT_HSIRDY: HSI ready interrupt -* - RCC_IT_HSERDY: HSE ready interrupt -* - RCC_IT_PLLRDY: PLL ready interrupt -* - RCC_IT_CSS: Clock Security System interrupt -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ClearITPendingBit(u8 RCC_IT) -{ - /* Check the parameters */ - assert_param(IS_RCC_CLEAR_IT(RCC_IT)); - - /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt - pending bits */ - *(vu8 *) CIR_BYTE3_ADDRESS = RCC_IT; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_rtc.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_rtc.c deleted file mode 100755 index e59f061..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_rtc.c +++ /dev/null @@ -1,320 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_rtc.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the RTC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_rtc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define CRL_CNF_Set ((u16)0x0010) /* Configuration Flag Enable Mask */ -#define CRL_CNF_Reset ((u16)0xFFEF) /* Configuration Flag Disable Mask */ -#define RTC_LSB_Mask ((u32)0x0000FFFF) /* RTC LSB Mask */ -#define PRLH_MSB_Mask ((u32)0x000F0000) /* RTC Prescaler MSB Mask */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : RTC_ITConfig -* Description : Enables or disables the specified RTC interrupts. -* Input : - RTC_IT: specifies the RTC interrupts sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - RTC_IT_OW: Overflow interrupt -* - RTC_IT_ALR: Alarm interrupt -* - RTC_IT_SEC: Second interrupt -* - NewState: new state of the specified RTC interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RTC_ITConfig(u16 RTC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RTC_IT(RTC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RTC->CRH |= RTC_IT; - } - else - { - RTC->CRH &= (u16)~RTC_IT; - } -} - -/******************************************************************************* -* Function Name : RTC_EnterConfigMode -* Description : Enters the RTC configuration mode. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_EnterConfigMode(void) -{ - /* Set the CNF flag to enter in the Configuration Mode */ - RTC->CRL |= CRL_CNF_Set; -} - -/******************************************************************************* -* Function Name : RTC_ExitConfigMode -* Description : Exits from the RTC configuration mode. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_ExitConfigMode(void) -{ - /* Reset the CNF flag to exit from the Configuration Mode */ - RTC->CRL &= CRL_CNF_Reset; -} - -/******************************************************************************* -* Function Name : RTC_GetCounter -* Description : Gets the RTC counter value. -* Input : None -* Output : None -* Return : RTC counter value. -*******************************************************************************/ -u32 RTC_GetCounter(void) -{ - u16 tmp = 0; - tmp = RTC->CNTL; - - return (((u32)RTC->CNTH << 16 ) | tmp) ; -} - -/******************************************************************************* -* Function Name : RTC_SetCounter -* Description : Sets the RTC counter value. -* Input : - CounterValue: RTC counter new value. -* Output : None -* Return : None -*******************************************************************************/ -void RTC_SetCounter(u32 CounterValue) -{ - RTC_EnterConfigMode(); - - /* Set RTC COUNTER MSB word */ - RTC->CNTH = CounterValue >> 16; - /* Set RTC COUNTER LSB word */ - RTC->CNTL = (CounterValue & RTC_LSB_Mask); - - RTC_ExitConfigMode(); -} - -/******************************************************************************* -* Function Name : RTC_SetPrescaler -* Description : Sets the RTC prescaler value. -* Input : - PrescalerValue: RTC prescaler new value. -* Output : None -* Return : None -*******************************************************************************/ -void RTC_SetPrescaler(u32 PrescalerValue) -{ - /* Check the parameters */ - assert_param(IS_RTC_PRESCALER(PrescalerValue)); - - RTC_EnterConfigMode(); - - /* Set RTC PRESCALER MSB word */ - RTC->PRLH = (PrescalerValue & PRLH_MSB_Mask) >> 16; - /* Set RTC PRESCALER LSB word */ - RTC->PRLL = (PrescalerValue & RTC_LSB_Mask); - - RTC_ExitConfigMode(); -} - -/******************************************************************************* -* Function Name : RTC_SetAlarm -* Description : Sets the RTC alarm value. -* Input : - AlarmValue: RTC alarm new value. -* Output : None -* Return : None -*******************************************************************************/ -void RTC_SetAlarm(u32 AlarmValue) -{ - RTC_EnterConfigMode(); - - /* Set the ALARM MSB word */ - RTC->ALRH = AlarmValue >> 16; - /* Set the ALARM LSB word */ - RTC->ALRL = (AlarmValue & RTC_LSB_Mask); - - RTC_ExitConfigMode(); -} - -/******************************************************************************* -* Function Name : RTC_GetDivider -* Description : Gets the RTC divider value. -* Input : None -* Output : None -* Return : RTC Divider value. -*******************************************************************************/ -u32 RTC_GetDivider(void) -{ - u32 tmp = 0x00; - - tmp = ((u32)RTC->DIVH & (u32)0x000F) << 16; - tmp |= RTC->DIVL; - - return tmp; -} - -/******************************************************************************* -* Function Name : RTC_WaitForLastTask -* Description : Waits until last write operation on RTC registers has finished. -* This function must be called before any write to RTC registers. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_WaitForLastTask(void) -{ - /* Loop until RTOFF flag is set */ - while ((RTC->CRL & RTC_FLAG_RTOFF) == (u16)RESET) - { - } -} - -/******************************************************************************* -* Function Name : RTC_WaitForSynchro -* Description : Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL) -* are synchronized with RTC APB clock. -* This function must be called before any read operation after -* an APB reset or an APB clock stop. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_WaitForSynchro(void) -{ - /* Clear RSF flag */ - RTC->CRL &= (u16)~RTC_FLAG_RSF; - - /* Loop until RSF flag is set */ - while ((RTC->CRL & RTC_FLAG_RSF) == (u16)RESET) - { - } -} - -/******************************************************************************* -* Function Name : RTC_GetFlagStatus -* Description : Checks whether the specified RTC flag is set or not. -* Input : - RTC_FLAG: specifies the flag to check. -* This parameter can be one the following values: -* - RTC_FLAG_RTOFF: RTC Operation OFF flag -* - RTC_FLAG_RSF: Registers Synchronized flag -* - RTC_FLAG_OW: Overflow flag -* - RTC_FLAG_ALR: Alarm flag -* - RTC_FLAG_SEC: Second flag -* Output : None -* Return : The new state of RTC_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus RTC_GetFlagStatus(u16 RTC_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); - - if ((RTC->CRL & RTC_FLAG) != (u16)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : RTC_ClearFlag -* Description : Clears the RTC’s pending flags. -* Input : - RTC_FLAG: specifies the flag to clear. -* This parameter can be any combination of the following values: -* - RTC_FLAG_RSF: Registers Synchronized flag. This flag -* is cleared only after an APB reset or an APB Clock stop. -* - RTC_FLAG_OW: Overflow flag -* - RTC_FLAG_ALR: Alarm flag -* - RTC_FLAG_SEC: Second flag -* Output : None -* Return : None -*******************************************************************************/ -void RTC_ClearFlag(u16 RTC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); - - /* Clear the coressponding RTC flag */ - RTC->CRL &= (u16)~RTC_FLAG; -} - -/******************************************************************************* -* Function Name : RTC_GetITStatus -* Description : Checks whether the specified RTC interrupt has occured or not. -* Input : - RTC_IT: specifies the RTC interrupts sources to check. -* This parameter can be one of the following values: -* - RTC_IT_OW: Overflow interrupt -* - RTC_IT_ALR: Alarm interrupt -* - RTC_IT_SEC: Second interrupt -* Output : None -* Return : The new state of the RTC_IT (SET or RESET). -*******************************************************************************/ -ITStatus RTC_GetITStatus(u16 RTC_IT) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RTC_GET_IT(RTC_IT)); - - bitstatus = (ITStatus)(RTC->CRL & RTC_IT); - - if (((RTC->CRH & RTC_IT) != (u16)RESET) && (bitstatus != (u16)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : RTC_ClearITPendingBit -* Description : Clears the RTC’s interrupt pending bits. -* Input : - RTC_IT: specifies the interrupt pending bit to clear. -* This parameter can be any combination of the following values: -* - RTC_IT_OW: Overflow interrupt -* - RTC_IT_ALR: Alarm interrupt -* - RTC_IT_SEC: Second interrupt -* Output : None -* Return : None -*******************************************************************************/ -void RTC_ClearITPendingBit(u16 RTC_IT) -{ - /* Check the parameters */ - assert_param(IS_RTC_IT(RTC_IT)); - - /* Clear the coressponding RTC pending bit */ - RTC->CRL &= (u16)~RTC_IT; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_sdio.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_sdio.c deleted file mode 100755 index 5fb7292..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_sdio.c +++ /dev/null @@ -1,832 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_sdio.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the SDIO firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_sdio.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* ------------ SDIO registers bit address in the alias region ----------- */ -#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) - -/* --- CLKCR Register ---*/ -/* Alias word address of CLKEN bit */ -#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) -#define CLKEN_BitNumber 0x08 -#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4)) - -/* --- CMD Register ---*/ -/* Alias word address of SDIOSUSPEND bit */ -#define CMD_OFFSET (SDIO_OFFSET + 0x0C) -#define SDIOSUSPEND_BitNumber 0x0B -#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4)) - -/* Alias word address of ENCMDCOMPL bit */ -#define ENCMDCOMPL_BitNumber 0x0C -#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4)) - -/* Alias word address of NIEN bit */ -#define NIEN_BitNumber 0x0D -#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4)) - -/* Alias word address of ATACMD bit */ -#define ATACMD_BitNumber 0x0E -#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4)) - -/* --- DCTRL Register ---*/ -/* Alias word address of DMAEN bit */ -#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) -#define DMAEN_BitNumber 0x03 -#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4)) - -/* Alias word address of RWSTART bit */ -#define RWSTART_BitNumber 0x08 -#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4)) - -/* Alias word address of RWSTOP bit */ -#define RWSTOP_BitNumber 0x09 -#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4)) - -/* Alias word address of RWMOD bit */ -#define RWMOD_BitNumber 0x0A -#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4)) - -/* Alias word address of SDIOEN bit */ -#define SDIOEN_BitNumber 0x0B -#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4)) - - -/* ---------------------- SDIO registers bit mask ------------------------ */ -/* --- CLKCR Register ---*/ -/* CLKCR register clear mask */ -#define CLKCR_CLEAR_MASK ((u32)0xFFFF8100) - -/* --- PWRCTRL Register ---*/ -/* SDIO PWRCTRL Mask */ -#define PWR_PWRCTRL_MASK ((u32)0xFFFFFFFC) - -/* --- DCTRL Register ---*/ -/* SDIO DCTRL Clear Mask */ -#define DCTRL_CLEAR_MASK ((u32)0xFFFFFF08) - -/* --- CMD Register ---*/ -/* CMD Register clear mask */ -#define CMD_CLEAR_MASK ((u32)0xFFFFF800) - -/* SDIO RESP Registers Address */ -#define SDIO_RESP_ADDR ((u32)(SDIO_BASE + 0x14)) - -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : SDIO_DeInit -* Description : Deinitializes the SDIO peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_DeInit(void) -{ - SDIO->POWER = 0x00000000; - SDIO->CLKCR = 0x00000000; - SDIO->ARG = 0x00000000; - SDIO->CMD = 0x00000000; - SDIO->DTIMER = 0x00000000; - SDIO->DLEN = 0x00000000; - SDIO->DCTRL = 0x00000000; - SDIO->ICR = 0x00C007FF; - SDIO->MASK = 0x00000000; -} - -/******************************************************************************* -* Function Name : SDIO_Init -* Description : Initializes the SDIO peripheral according to the specified -* parameters in the SDIO_InitStruct. -* Input : SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure -* that contains the configuration information for the SDIO -* peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge)); - assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass)); - assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave)); - assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide)); - assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); - -/*---------------------------- SDIO CLKCR Configuration ------------------------*/ - /* Get the SDIO CLKCR value */ - tmpreg = SDIO->CLKCR; - - /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */ - tmpreg &= CLKCR_CLEAR_MASK; - - /* Set CLKDIV bits according to SDIO_ClockDiv value */ - /* Set PWRSAV bit according to SDIO_ClockPowerSave value */ - /* Set BYPASS bit according to SDIO_ClockBypass value */ - /* Set WIDBUS bits according to SDIO_BusWide value */ - /* Set NEGEDGE bits according to SDIO_ClockEdge value */ - /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */ - tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave | - SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide | - SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); - - /* Write to SDIO CLKCR */ - SDIO->CLKCR = tmpreg; -} - -/******************************************************************************* -* Function Name : SDIO_StructInit -* Description : Fills each SDIO_InitStruct member with its default value. -* Input : SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which -* will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct) -{ - /* SDIO_InitStruct members default value */ - SDIO_InitStruct->SDIO_ClockDiv = 0x00; - SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; -} - -/******************************************************************************* -* Function Name : SDIO_ClockCmd -* Description : Enables or disables the SDIO Clock. -* Input : NewState: new state of the SDIO Clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_ClockCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CLKCR_CLKEN_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_SetPowerState -* Description : Sets the power status of the controller. -* Input : SDIO_PowerState: new state of the Power state. -* This parameter can be one of the following values: -* - SDIO_PowerState_OFF -* - SDIO_PowerState_ON -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SetPowerState(u32 SDIO_PowerState) -{ - /* Check the parameters */ - assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState)); - - SDIO->POWER &= PWR_PWRCTRL_MASK; - SDIO->POWER |= SDIO_PowerState; -} - -/******************************************************************************* -* Function Name : SDIO_GetPowerState -* Description : Gets the power status of the controller. -* Input : None -* Output : None -* Return : Power status of the controller. The returned value can -* be one of the following: -* - 0x00: Power OFF -* - 0x02: Power UP -* - 0x03: Power ON -*******************************************************************************/ -u32 SDIO_GetPowerState(void) -{ - return (SDIO->POWER & (~PWR_PWRCTRL_MASK)); -} - -/******************************************************************************* -* Function Name : SDIO_ITConfig -* Description : Enables or disables the SDIO interrupts. -* Input : - SDIO_IT: specifies the SDIO interrupt sources to be -* enabled or disabled. -* This parameter can be one or a combination of the following -* values: -* - SDIO_IT_CCRCFAIL: Command response received (CRC check -* failed) interrupt -* - SDIO_IT_DCRCFAIL: Data block sent/received (CRC check -* failed) interrupt -* - SDIO_IT_CTIMEOUT: Command response timeout interrupt -* - SDIO_IT_DTIMEOUT: Data timeout interrupt -* - SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt -* - SDIO_IT_RXOVERR: Received FIFO overrun error interrupt -* - SDIO_IT_CMDREND: Command response received (CRC check -* passed) interrupt -* - SDIO_IT_CMDSENT: Command sent (no response required) -* interrupt -* - SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) interrupt -* - SDIO_IT_STBITERR: Start bit not detected on all data -* signals in wide bus mode interrupt -* - SDIO_IT_DBCKEND: Data block sent/received (CRC check -* passed) interrupt -* - SDIO_IT_CMDACT: Command transfer in progress interrupt -* - SDIO_IT_TXACT: Data transmit in progress interrupt -* - SDIO_IT_RXACT: Data receive in progress interrupt -* - SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt -* - SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt -* - SDIO_IT_TXFIFOF: Transmit FIFO full interrupt -* - SDIO_IT_RXFIFOF: Receive FIFO full interrupt -* - SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt -* - SDIO_IT_RXFIFOE: Receive FIFO empty interrupt -* - SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt -* - SDIO_IT_RXDAVL: Data available in receive FIFO interrupt -* - SDIO_IT_SDIOIT: SD I/O interrupt received interrupt -* - SDIO_IT_CEATAEND: CE-ATA command completion signal -* received for CMD61 interrupt -* - NewState: new state of the specified SDIO interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_ITConfig(u32 SDIO_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SDIO_IT(SDIO_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the SDIO interrupts */ - SDIO->MASK |= SDIO_IT; - } - else - { - /* Disable the SDIO interrupts */ - SDIO->MASK &= ~SDIO_IT; - } -} - -/******************************************************************************* -* Function Name : SDIO_DMACmd -* Description : Enables or disables the SDIO DMA request. -* Input : NewState: new state of the selected SDIO DMA request. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_DMACmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) DCTRL_DMAEN_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_SendCommand -* Description : Initializes the SDIO Command according to the specified -* parameters in the SDIO_CmdInitStruct and send the command. -* Input : SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef -* structure that contains the configuration information -* for the SDIO command. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex)); - assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response)); - assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait)); - assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM)); - -/*---------------------------- SDIO ARG Configuration ------------------------*/ - /* Set the SDIO Argument value */ - SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument; - -/*---------------------------- SDIO CMD Configuration ------------------------*/ - /* Get the SDIO CMD value */ - tmpreg = SDIO->CMD; - - /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */ - tmpreg &= CMD_CLEAR_MASK; - /* Set CMDINDEX bits according to SDIO_CmdIndex value */ - /* Set WAITRESP bits according to SDIO_Response value */ - /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */ - /* Set CPSMEN bits according to SDIO_CPSM value */ - tmpreg |= (u32)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response - | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM; - - /* Write to SDIO CMD */ - SDIO->CMD = tmpreg; -} - -/******************************************************************************* -* Function Name : SDIO_CmdStructInit -* Description : Fills each SDIO_CmdInitStruct member with its default value. -* Input : SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct) -{ - /* SDIO_CmdInitStruct members default value */ - SDIO_CmdInitStruct->SDIO_Argument = 0x00; - SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00; - SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No; - SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable; -} - -/******************************************************************************* -* Function Name : SDIO_GetCommandResponse -* Description : Returns command index of last command for which response -* received. -* Input : None -* Output : None -* Return : Returns the command index of the last command response received. -*******************************************************************************/ -u8 SDIO_GetCommandResponse(void) -{ - return (u8)(SDIO->RESPCMD); -} - -/******************************************************************************* -* Function Name : SDIO_GetResponse -* Description : Returns response received from the card for the last command. -* Input : - SDIO_RESP: Specifies the SDIO response register. -* This parameter can be one of the following values: -* - SDIO_RESP1: Response Register 1 -* - SDIO_RESP2: Response Register 2 -* - SDIO_RESP3: Response Register 3 -* - SDIO_RESP4: Response Register 4 -* Output : None -* Return : The Corresponding response register value. -*******************************************************************************/ -u32 SDIO_GetResponse(u32 SDIO_RESP) -{ - /* Check the parameters */ - assert_param(IS_SDIO_RESP(SDIO_RESP)); - - return (*(vu32 *)(SDIO_RESP_ADDR + SDIO_RESP)); -} - -/******************************************************************************* -* Function Name : SDIO_DataConfig -* Description : Initializes the SDIO data path according to the specified -* parameters in the SDIO_DataInitStruct. -* Input : SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef -* structure that contains the configuration information -* for the SDIO command. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength)); - assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize)); - assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir)); - assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode)); - assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM)); - -/*---------------------------- SDIO DTIMER Configuration ---------------------*/ - /* Set the SDIO Data TimeOut value */ - SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut; - -/*---------------------------- SDIO DLEN Configuration -----------------------*/ - /* Set the SDIO DataLength value */ - SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength; - -/*---------------------------- SDIO DCTRL Configuration ----------------------*/ - /* Get the SDIO DCTRL value */ - tmpreg = SDIO->DCTRL; - - /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */ - tmpreg &= DCTRL_CLEAR_MASK; - /* Set DEN bit according to SDIO_DPSM value */ - /* Set DTMODE bit according to SDIO_TransferMode value */ - /* Set DTDIR bit according to SDIO_TransferDir value */ - /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */ - tmpreg |= (u32)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir - | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM; - - /* Write to SDIO DCTRL */ - SDIO->DCTRL = tmpreg; -} - -/******************************************************************************* -* Function Name : SDIO_DataStructInit -* Description : Fills each SDIO_DataInitStruct member with its default value. -* Input : SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct) -{ - /* SDIO_DataInitStruct members default value */ - SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF; - SDIO_DataInitStruct->SDIO_DataLength = 0x00; - SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b; - SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable; -} - -/******************************************************************************* -* Function Name : SDIO_GetDataCounter -* Description : Returns number of remaining data bytes to be transferred. -* Input : None -* Output : None -* Return : Number of remaining data bytes to be transferred -*******************************************************************************/ -u32 SDIO_GetDataCounter(void) -{ - return SDIO->DCOUNT; -} - -/******************************************************************************* -* Function Name : SDIO_ReadData -* Description : Read one data word from Rx FIFO. -* Input : None -* Output : None -* Return : Data received -*******************************************************************************/ -u32 SDIO_ReadData(void) -{ - return SDIO->FIFO; -} - -/******************************************************************************* -* Function Name : SDIO_WriteData -* Description : Write one data word to Tx FIFO. -* Input : Data: 32-bit data word to write. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_WriteData(u32 Data) -{ - SDIO->FIFO = Data; -} - -/******************************************************************************* -* Function Name : SDIO_GetFIFOCount -* Description : Returns the number of words left to be written to or read -* from FIFO. -* Input : None -* Output : None -* Return : Remaining number of words. -*******************************************************************************/ -u32 SDIO_GetFIFOCount(void) -{ - return SDIO->FIFOCNT; -} - -/******************************************************************************* -* Function Name : SDIO_StartSDIOReadWait -* Description : Starts the SD I/O Read Wait operation. -* Input : NewState: new state of the Start SDIO Read Wait operation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_StartSDIOReadWait(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) DCTRL_RWSTART_BB = (u32) NewState; -} - -/******************************************************************************* -* Function Name : SDIO_StopSDIOReadWait -* Description : Stops the SD I/O Read Wait operation. -* Input : NewState: new state of the Stop SDIO Read Wait operation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_StopSDIOReadWait(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) DCTRL_RWSTOP_BB = (u32) NewState; -} - -/******************************************************************************* -* Function Name : SDIO_SetSDIOReadWaitMode -* Description : Sets one of the two options of inserting read wait interval. -* Input : SDIOReadWaitMode: SD I/O Read Wait operation mode. -* This parametre can be: -* - SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK -* - SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2 -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SetSDIOReadWaitMode(u32 SDIO_ReadWaitMode) -{ - /* Check the parameters */ - assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); - - *(vu32 *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode; -} - -/******************************************************************************* -* Function Name : SDIO_SetSDIOOperation -* Description : Enables or disables the SD I/O Mode Operation. -* Input : NewState: new state of SDIO specific operation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SetSDIOOperation(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) DCTRL_SDIOEN_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_SendSDIOSuspendCmd -* Description : Enables or disables the SD I/O Mode suspend command sending. -* Input : NewState: new state of the SD I/O Mode suspend command. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SendSDIOSuspendCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CMD_SDIOSUSPEND_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_CommandCompletionCmd -* Description : Enables or disables the command completion signal. -* Input : NewState: new state of command completion signal. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_CommandCompletionCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CMD_ENCMDCOMPL_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_CEATAITCmd -* Description : Enables or disables the CE-ATA interrupt. -* Input : NewState: new state of CE-ATA interrupt. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_CEATAITCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CMD_NIEN_BB = (u32)((~((u32)NewState)) & ((u32)0x1)); -} - -/******************************************************************************* -* Function Name : SDIO_SendCEATACmd -* Description : Sends CE-ATA command (CMD61). -* Input : NewState: new state of CE-ATA command. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SendCEATACmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CMD_ATACMD_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_GetFlagStatus -* Description : Checks whether the specified SDIO flag is set or not. -* Input : SDIO_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - SDIO_FLAG_CCRCFAIL: Command response received (CRC check -* failed) -* - SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check -* failed) -* - SDIO_FLAG_CTIMEOUT: Command response timeout -* - SDIO_FLAG_DTIMEOUT: Data timeou -* - SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error -* - SDIO_FLAG_RXOVERR: Received FIFO overrun error -* - SDIO_FLAG_CMDREND: Command response received (CRC check -* passed) -* - SDIO_FLAG_CMDSENT: Command sent (no response required) -* - SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) -* - SDIO_FLAG_STBITERR: Start bit not detected on all data -* signals in wide bus mode -* - SDIO_FLAG_DBCKEND: Data block sent/received (CRC check -* passed) -* - SDIO_FLAG_CMDACT: Command transfer in progress -* - SDIO_FLAG_TXACT: Data transmit in progress -* - SDIO_FLAG_RXACT: Data receive in progress -* - SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty -* - SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full -* - SDIO_FLAG_TXFIFOF: Transmit FIFO full -* - SDIO_FLAG_RXFIFOF: Receive FIFO full -* - SDIO_FLAG_TXFIFOE: Transmit FIFO empty -* - SDIO_FLAG_RXFIFOE: Receive FIFO empty -* - SDIO_FLAG_TXDAVL: Data available in transmit FIFO -* - SDIO_FLAG_RXDAVL: Data available in receive FIFO -* - SDIO_FLAG_SDIOIT: SD I/O interrupt received -* - SDIO_FLAG_CEATAEND: CE-ATA command completion signal -* received for CMD61 -* Output : None -* Return : The new state of SDIO_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus SDIO_GetFlagStatus(u32 SDIO_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SDIO_FLAG(SDIO_FLAG)); - - if ((SDIO->STA & SDIO_FLAG) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : SDIO_ClearFlag -* Description : Clears the SDIO's pending flags. -* Input : SDIO_FLAG: specifies the flag to clear. -* This parameter can be one or a combination of the following -* values: -* - SDIO_FLAG_CCRCFAIL: Command response received (CRC check -* failed) -* - SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check -* failed) -* - SDIO_FLAG_CTIMEOUT: Command response timeout -* - SDIO_FLAG_DTIMEOUT: Data timeou -* - SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error -* - SDIO_FLAG_RXOVERR: Received FIFO overrun error -* - SDIO_FLAG_CMDREND: Command response received (CRC check -* passed) -* - SDIO_FLAG_CMDSENT: Command sent (no response required) -* - SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) -* - SDIO_FLAG_STBITERR: Start bit not detected on all data -* signals in wide bus mode -* - SDIO_FLAG_DBCKEND: Data block sent/received (CRC check -* passed) -* - SDIO_FLAG_SDIOIT: SD I/O interrupt received -* - SDIO_FLAG_CEATAEND: CE-ATA command completion signal -* received for CMD61 -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_ClearFlag(u32 SDIO_FLAG) -{ - /* Check the parameters */ - assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG)); - - SDIO->ICR = SDIO_FLAG; -} - -/******************************************************************************* -* Function Name : SDIO_GetITStatus -* Description : Checks whether the specified SDIO interrupt has occurred or not. -* Input : SDIO_IT: specifies the SDIO interrupt source to check. -* This parameter can be one of the following values: -* - SDIO_IT_CCRCFAIL: Command response received (CRC check -* failed) interrupt -* - SDIO_IT_DCRCFAIL: Data block sent/received (CRC check -* failed) interrupt -* - SDIO_IT_CTIMEOUT: Command response timeout interrupt -* - SDIO_IT_DTIMEOUT: Data timeout interrupt -* - SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt -* - SDIO_IT_RXOVERR: Received FIFO overrun error interrupt -* - SDIO_IT_CMDREND: Command response received (CRC check -* passed) interrupt -* - SDIO_IT_CMDSENT: Command sent (no response required) -* interrupt -* - SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) interrupt -* - SDIO_IT_STBITERR: Start bit not detected on all data -* signals in wide bus mode interrupt -* - SDIO_IT_DBCKEND: Data block sent/received (CRC check -* passed) interrupt -* - SDIO_IT_CMDACT: Command transfer in progress interrupt -* - SDIO_IT_TXACT: Data transmit in progress interrupt -* - SDIO_IT_RXACT: Data receive in progress interrupt -* - SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt -* - SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt -* - SDIO_IT_TXFIFOF: Transmit FIFO full interrupt -* - SDIO_IT_RXFIFOF: Receive FIFO full interrupt -* - SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt -* - SDIO_IT_RXFIFOE: Receive FIFO empty interrupt -* - SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt -* - SDIO_IT_RXDAVL: Data available in receive FIFO interrupt -* - SDIO_IT_SDIOIT: SD I/O interrupt received interrupt -* - SDIO_IT_CEATAEND: CE-ATA command completion signal -* received for CMD61 interrupt -* Output : None -* Return : The new state of SDIO_IT (SET or RESET). -*******************************************************************************/ -ITStatus SDIO_GetITStatus(u32 SDIO_IT) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SDIO_GET_IT(SDIO_IT)); - - if ((SDIO->STA & SDIO_IT) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : SDIO_ClearITPendingBit -* Description : Clears the SDIO’s interrupt pending bits. -* Input : SDIO_IT: specifies the interrupt pending bit to clear. -* This parameter can be one or a combination of the following -* values: -* - SDIO_IT_CCRCFAIL: Command response received (CRC check -* failed) interrupt -* - SDIO_IT_DCRCFAIL: Data block sent/received (CRC check -* failed) interrupt -* - SDIO_IT_CTIMEOUT: Command response timeout interrupt -* - SDIO_IT_DTIMEOUT: Data timeout interrupt -* - SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt -* - SDIO_IT_RXOVERR: Received FIFO overrun error interrupt -* - SDIO_IT_CMDREND: Command response received (CRC check -* passed) interrupt -* - SDIO_IT_CMDSENT: Command sent (no response required) -* interrupt -* - SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) interrupt -* - SDIO_IT_STBITERR: Start bit not detected on all data -* signals in wide bus mode interrupt -* - SDIO_IT_SDIOIT: SD I/O interrupt received interrupt -* - SDIO_IT_CEATAEND: CE-ATA command completion signal -* received for CMD61 -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_ClearITPendingBit(u32 SDIO_IT) -{ - /* Check the parameters */ - assert_param(IS_SDIO_CLEAR_IT(SDIO_IT)); - - SDIO->ICR = SDIO_IT; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_spi.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_spi.c deleted file mode 100755 index e6a8d35..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_spi.c +++ /dev/null @@ -1,886 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_spi.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the SPI firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_spi.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* SPI SPE mask */ -#define CR1_SPE_Set ((u16)0x0040) -#define CR1_SPE_Reset ((u16)0xFFBF) - -/* I2S I2SE mask */ -#define I2SCFGR_I2SE_Set ((u16)0x0400) -#define I2SCFGR_I2SE_Reset ((u16)0xFBFF) - -/* SPI CRCNext mask */ -#define CR1_CRCNext_Set ((u16)0x1000) - -/* SPI CRCEN mask */ -#define CR1_CRCEN_Set ((u16)0x2000) -#define CR1_CRCEN_Reset ((u16)0xDFFF) - -/* SPI SSOE mask */ -#define CR2_SSOE_Set ((u16)0x0004) -#define CR2_SSOE_Reset ((u16)0xFFFB) - -/* SPI registers Masks */ -#define CR1_CLEAR_Mask ((u16)0x3040) -#define I2SCFGR_CLEAR_Mask ((u16)0xF040) - -/* SPI or I2S mode selection masks */ -#define SPI_Mode_Select ((u16)0xF7FF) -#define I2S_Mode_Select ((u16)0x0800) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : SPI_I2S_DeInit -* Description : Deinitializes the SPIx peripheral registers to their default -* reset values (Affects also the I2Ss). -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_DeInit(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - switch (*(u32*)&SPIx) - { - case SPI1_BASE: - /* Enable SPI1 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); - /* Release SPI1 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); - break; - - case SPI2_BASE: - /* Enable SPI2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); - /* Release SPI2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); - break; - - case SPI3_BASE: - /* Enable SPI3 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); - /* Release SPI3 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : SPI_Init -* Description : Initializes the SPIx peripheral according to the specified -* parameters in the SPI_InitStruct. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_InitStruct: pointer to a SPI_InitTypeDef structure that -* contains the configuration information for the specified -* SPI peripheral. -* Output : None -* Return : None -******************************************************************************/ -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) -{ - u16 tmpreg = 0; - - /* check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Check the SPI parameters */ - assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); - assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); - assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); - assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); - assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); - assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); - assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); - assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); - assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); - -/*---------------------------- SPIx CR1 Configuration ------------------------*/ - /* Get the SPIx CR1 value */ - tmpreg = SPIx->CR1; - /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler - master/salve mode, CPOL and CPHA */ - /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ - /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ - /* Set LSBFirst bit according to SPI_FirstBit value */ - /* Set BR bits according to SPI_BaudRatePrescaler value */ - /* Set CPOL bit according to SPI_CPOL value */ - /* Set CPHA bit according to SPI_CPHA value */ - tmpreg |= (u16)((u32)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | - SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | - SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | - SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); - /* Write to SPIx CR1 */ - SPIx->CR1 = tmpreg; - - /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ - SPIx->I2SCFGR &= SPI_Mode_Select; - -/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ - /* Write to SPIx CRCPOLY */ - SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; -} - -/******************************************************************************* -* Function Name : I2S_Init -* Description : Initializes the SPIx peripheral according to the specified -* parameters in the I2S_InitStruct. -* Input : - SPIx: where x can be 2 or 3 to select the SPI peripheral -* (configured in I2S mode). -* - I2S_InitStruct: pointer to an I2S_InitTypeDef structure that -* contains the configuration information for the specified -* SPI peripheral configured in I2S mode. -* Output : None -* Return : None -******************************************************************************/ -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) -{ - u16 tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; - u32 tmp = 0; - RCC_ClocksTypeDef RCC_Clocks; - - /* Check the I2S parameters */ - assert_param(IS_SPI_23_PERIPH(SPIx)); - assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); - assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); - assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); - assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); - assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); - assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); - -/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ - - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; - SPIx->I2SPR = 0x0002; - - /* Get the I2SCFGR register value */ - tmpreg = SPIx->I2SCFGR; - - /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ - if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) - { - i2sodd = (u16)0; - i2sdiv = (u16)2; - } - /* If the requested audio frequency is not the default, compute the prescaler */ - else - { - /* Check the frame length (For the Prescaler computing) */ - if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) - { - /* Packet length is 16 bits */ - packetlength = 1; - } - else - { - /* Packet length is 32 bits */ - packetlength = 2; - } - /* Get System Clock frequency */ - RCC_GetClocksFreq(&RCC_Clocks); - - /* Compute the Real divider depending on the MCLK output state with a flaoting point */ - if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) - { - /* MCLK output is enabled */ - tmp = (u16)(((10 * RCC_Clocks.SYSCLK_Frequency) / (256 * I2S_InitStruct->I2S_AudioFreq)) + 5); - } - else - { - /* MCLK output is disabled */ - tmp = (u16)(((10 * RCC_Clocks.SYSCLK_Frequency) / (32 * packetlength * I2S_InitStruct->I2S_AudioFreq)) + 5); - } - - /* Remove the flaoting point */ - tmp = tmp/10; - - /* Check the parity of the divider */ - i2sodd = (u16)(tmp & (u16)0x0001); - - /* Compute the i2sdiv prescaler */ - i2sdiv = (u16)((tmp - i2sodd) / 2); - - /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ - i2sodd = (u16) (i2sodd << 8); - } - - /* Test if the divider is 1 or 0 */ - if ((i2sdiv < 2) || (i2sdiv > 0xFF)) - { - /* Set the default values */ - i2sdiv = 2; - i2sodd = 0; - } - - /* Write to SPIx I2SPR register the computed value */ - SPIx->I2SPR = (u16)(i2sdiv | i2sodd | I2S_InitStruct->I2S_MCLKOutput); - - /* Configure the I2S with the SPI_InitStruct values */ - tmpreg |= (u16)(I2S_Mode_Select | I2S_InitStruct->I2S_Mode | \ - I2S_InitStruct->I2S_Standard | I2S_InitStruct->I2S_DataFormat | \ - I2S_InitStruct->I2S_CPOL); - - /* Write to SPIx I2SCFGR */ - SPIx->I2SCFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : SPI_StructInit -* Description : Fills each SPI_InitStruct member with its default value. -* Input : - SPI_InitStruct : pointer to a SPI_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) -{ -/*--------------- Reset SPI init structure parameters values -----------------*/ - /* Initialize the SPI_Direction member */ - SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; - - /* initialize the SPI_Mode member */ - SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; - - /* initialize the SPI_DataSize member */ - SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; - - /* Initialize the SPI_CPOL member */ - SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; - - /* Initialize the SPI_CPHA member */ - SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; - - /* Initialize the SPI_NSS member */ - SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; - - /* Initialize the SPI_BaudRatePrescaler member */ - SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; - - /* Initialize the SPI_FirstBit member */ - SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; - - /* Initialize the SPI_CRCPolynomial member */ - SPI_InitStruct->SPI_CRCPolynomial = 7; -} - -/******************************************************************************* -* Function Name : I2S_StructInit -* Description : Fills each I2S_InitStruct member with its default value. -* Input : - I2S_InitStruct : pointer to a I2S_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) -{ -/*--------------- Reset I2S init structure parameters values -----------------*/ - /* Initialize the I2S_Mode member */ - I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; - - /* Initialize the I2S_Standard member */ - I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; - - /* Initialize the I2S_DataFormat member */ - I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; - - /* Initialize the I2S_MCLKOutput member */ - I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; - - /* Initialize the I2S_AudioFreq member */ - I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; - - /* Initialize the I2S_CPOL member */ - I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; -} - -/******************************************************************************* -* Function Name : SPI_Cmd -* Description : Enables or disables the specified SPI peripheral. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - NewState: new state of the SPIx peripheral. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral */ - SPIx->CR1 |= CR1_SPE_Set; - } - else - { - /* Disable the selected SPI peripheral */ - SPIx->CR1 &= CR1_SPE_Reset; - } -} - -/******************************************************************************* -* Function Name : I2S_Cmd -* Description : Enables or disables the specified SPI peripheral (in I2S mode). -* Input : - SPIx: where x can be 2 or 3 to select the SPI peripheral. -* - NewState: new state of the SPIx peripheral. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_23_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral (in I2S mode) */ - SPIx->I2SCFGR |= I2SCFGR_I2SE_Set; - } - else - { - /* Disable the selected SPI peripheral (in I2S mode) */ - SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset; - } -} - -/******************************************************************************* -* Function Name : SPI_I2S_ITConfig -* Description : Enables or disables the specified SPI/I2S interrupts. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_IT: specifies the SPI/I2S interrupt source to be -* enabled or disabled. -* This parameter can be one of the following values: -* - SPI_I2S_IT_TXE: Tx buffer empty interrupt mask -* - SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask -* - SPI_I2S_IT_ERR: Error interrupt mask -* - NewState: new state of the specified SPI/I2S interrupt. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, u8 SPI_I2S_IT, FunctionalState NewState) -{ - u16 itpos = 0, itmask = 0 ; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); - - /* Get the SPI/I2S IT index */ - itpos = SPI_I2S_IT >> 4; - /* Set the IT mask */ - itmask = (u16)((u16)1 << itpos); - - if (NewState != DISABLE) - { - /* Enable the selected SPI/I2S interrupt */ - SPIx->CR2 |= itmask; - } - else - { - /* Disable the selected SPI/I2S interrupt */ - SPIx->CR2 &= (u16)~itmask; - } -} - -/******************************************************************************* -* Function Name : SPI_I2S_DMACmd -* Description : Enables or disables the SPIx/I2Sx DMA interface. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request -* to be enabled or disabled. -* This parameter can be any combination of the following values: -* - SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request -* - SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request -* - NewState: new state of the selected SPI/I2S DMA transfer -* request. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, u16 SPI_I2S_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI/I2S DMA requests */ - SPIx->CR2 |= SPI_I2S_DMAReq; - } - else - { - /* Disable the selected SPI/I2S DMA requests */ - SPIx->CR2 &= (u16)~SPI_I2S_DMAReq; - } -} - -/******************************************************************************* -* Function Name : SPI_I2S_SendData -* Description : Transmits a Data through the SPIx/I2Sx peripheral. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - Data : Data to be transmitted.. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_SendData(SPI_TypeDef* SPIx, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Write in the DR register the data to be sent */ - SPIx->DR = Data; -} - -/******************************************************************************* -* Function Name : SPI_I2S_ReceiveData -* Description : Returns the most recent received data by the SPIx/I2Sx peripheral. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* Output : None -* Return : The value of the received data. -*******************************************************************************/ -u16 SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Return the data in the DR register */ - return SPIx->DR; -} - -/******************************************************************************* -* Function Name : SPI_NSSInternalSoftwareConfig -* Description : Configures internally by software the NSS pin for the selected -* SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_NSSInternalSoft: specifies the SPI NSS internal state. -* This parameter can be one of the following values: -* - SPI_NSSInternalSoft_Set: Set NSS pin internally -* - SPI_NSSInternalSoft_Reset: Reset NSS pin internally -* Output : None -* Return : None -*******************************************************************************/ -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, u16 SPI_NSSInternalSoft) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); - - if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) - { - /* Set NSS pin internally by software */ - SPIx->CR1 |= SPI_NSSInternalSoft_Set; - } - else - { - /* Reset NSS pin internally by software */ - SPIx->CR1 &= SPI_NSSInternalSoft_Reset; - } -} - -/******************************************************************************* -* Function Name : SPI_SSOutputCmd -* Description : Enables or disables the SS output for the selected SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - NewState: new state of the SPIx SS output. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI SS output */ - SPIx->CR2 |= CR2_SSOE_Set; - } - else - { - /* Disable the selected SPI SS output */ - SPIx->CR2 &= CR2_SSOE_Reset; - } -} - -/******************************************************************************* -* Function Name : SPI_DataSizeConfig -* Description : Configures the data size for the selected SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_DataSize: specifies the SPI data size. -* This parameter can be one of the following values: -* - SPI_DataSize_16b: Set data frame format to 16bit -* - SPI_DataSize_8b: Set data frame format to 8bit -* Output : None -* Return : None -*******************************************************************************/ -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, u16 SPI_DataSize) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DATASIZE(SPI_DataSize)); - - /* Clear DFF bit */ - SPIx->CR1 &= (u16)~SPI_DataSize_16b; - /* Set new DFF bit value */ - SPIx->CR1 |= SPI_DataSize; -} - -/******************************************************************************* -* Function Name : SPI_TransmitCRC -* Description : Transmit the SPIx CRC value. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_TransmitCRC(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Enable the selected SPI CRC transmission */ - SPIx->CR1 |= CR1_CRCNext_Set; -} - -/******************************************************************************* -* Function Name : SPI_CalculateCRC -* Description : Enables or disables the CRC value calculation of the -* transfered bytes. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - NewState: new state of the SPIx CRC value calculation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI CRC calculation */ - SPIx->CR1 |= CR1_CRCEN_Set; - } - else - { - /* Disable the selected SPI CRC calculation */ - SPIx->CR1 &= CR1_CRCEN_Reset; - } -} - -/******************************************************************************* -* Function Name : SPI_GetCRC -* Description : Returns the transmit or the receive CRC register value for -* the specified SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_CRC: specifies the CRC register to be read. -* This parameter can be one of the following values: -* - SPI_CRC_Tx: Selects Tx CRC register -* - SPI_CRC_Rx: Selects Rx CRC register -* Output : None -* Return : The selected CRC register value.. -*******************************************************************************/ -u16 SPI_GetCRC(SPI_TypeDef* SPIx, u8 SPI_CRC) -{ - u16 crcreg = 0; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_CRC(SPI_CRC)); - - if (SPI_CRC != SPI_CRC_Rx) - { - /* Get the Tx CRC register */ - crcreg = SPIx->TXCRCR; - } - else - { - /* Get the Rx CRC register */ - crcreg = SPIx->RXCRCR; - } - - /* Return the selected CRC register */ - return crcreg; -} - -/******************************************************************************* -* Function Name : SPI_GetCRCPolynomial -* Description : Returns the CRC Polynomial register value for the specified SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* Output : None -* Return : The CRC Polynomial register value. -*******************************************************************************/ -u16 SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Return the CRC polynomial register */ - return SPIx->CRCPR; -} - -/******************************************************************************* -* Function Name : SPI_BiDirectionalLineConfig -* Description : Selects the data transfer direction in bi-directional mode -* for the specified SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_Direction: specifies the data transfer direction in -* bi-directional mode. -* This parameter can be one of the following values: -* - SPI_Direction_Tx: Selects Tx transmission direction -* - SPI_Direction_Rx: Selects Rx receive direction -* Output : None -* Return : None -*******************************************************************************/ -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, u16 SPI_Direction) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DIRECTION(SPI_Direction)); - - if (SPI_Direction == SPI_Direction_Tx) - { - /* Set the Tx only mode */ - SPIx->CR1 |= SPI_Direction_Tx; - } - else - { - /* Set the Rx only mode */ - SPIx->CR1 &= SPI_Direction_Rx; - } -} - -/******************************************************************************* -* Function Name : SPI_I2S_GetFlagStatus -* Description : Checks whether the specified SPI/I2S flag is set or not. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_FLAG: specifies the SPI/I2S flag to check. -* This parameter can be one of the following values: -* - SPI_I2S_FLAG_TXE: Transmit buffer empty flag. -* - SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. -* - SPI_I2S_FLAG_BSY: Busy flag. -* - SPI_I2S_FLAG_OVR: Overrun flag. -* - SPI_FLAG_MODF: Mode Fault flag. -* - SPI_FLAG_CRCERR: CRC Error flag. -* - I2S_FLAG_UDR: Underrun Error flag. -* - I2S_FLAG_CHSIDE: Channel Side flag. -* Output : None -* Return : The new state of SPI_I2S_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, u16 SPI_I2S_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); - - /* Check the status of the specified SPI/I2S flag */ - if ((SPIx->SR & SPI_I2S_FLAG) != (u16)RESET) - { - /* SPI_I2S_FLAG is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_FLAG is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : SPI_I2S_ClearFlag -* Description : Clears the SPIx/I2Sx pending flags. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_FLAG: specifies the SPI/I2S flag to clear. -* This parameter can be one of the following values: -* - SPI_I2S_FLAG_OVR: Overrun flag -* - SPI_FLAG_MODF: Mode Fault flag. -* - SPI_FLAG_CRCERR: CRC Error flag. -* - I2S_FLAG_UDR: Underrun Error flag. -* Note: Before clearing OVR flag, it is mandatory to read -* SPI_I2S_DR register, so that the last data is not lost. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, u16 SPI_I2S_FLAG) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); - - /* SPI_FLAG_MODF flag clear */ - if(SPI_I2S_FLAG == SPI_FLAG_MODF) - { - /* Read SR register */ - (void)SPIx->SR; - - /* Write on CR1 register */ - SPIx->CR1 |= CR1_SPE_Set; - } - /* SPI_I2S_FLAG_OVR flag or I2S_FLAG_UDR flag clear */ - else if ((SPI_I2S_FLAG == SPI_I2S_FLAG_OVR) || (SPI_I2S_FLAG == I2S_FLAG_UDR)) - { - /* Read SR register (Before clearing OVR flag, it is mandatory to read - SPI_I2S_DR register)*/ - (void)SPIx->SR; - } - else /* SPI_FLAG_CRCERR flag clear */ - { - /* Clear the selected SPI flag */ - SPIx->SR = (u16)~SPI_I2S_FLAG; - } -} - -/******************************************************************************* -* Function Name : SPI_I2S_GetITStatus -* Description : Checks whether the specified SPI/I2S interrupt has occurred or not. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_IT: specifies the SPI/I2S interrupt source to check. -* This parameter can be one of the following values: -* - SPI_I2S_IT_TXE: Transmit buffer empty interrupt. -* - SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. -* - SPI_I2S_IT_OVR: Overrun interrupt. -* - SPI_IT_MODF: Mode Fault interrupt. -* - SPI_IT_CRCERR: CRC Error interrupt. -* - I2S_IT_UDR: Underrun Error interrupt. -* Output : None -* Return : The new state of SPI_I2S_IT (SET or RESET). -*******************************************************************************/ -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, u8 SPI_I2S_IT) -{ - ITStatus bitstatus = RESET; - u16 itpos = 0, itmask = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); - - /* Get the SPI/I2S IT index */ - itpos = (u16)((u16)0x01 << (SPI_I2S_IT & (u8)0x0F)); - - /* Get the SPI/I2S IT mask */ - itmask = SPI_I2S_IT >> 4; - /* Set the IT mask */ - itmask = (u16)((u16)0x01 << itmask); - /* Get the SPI_I2S_IT enable bit status */ - enablestatus = (SPIx->CR2 & itmask) ; - - /* Check the status of the specified SPI/I2S interrupt */ - if (((SPIx->SR & itpos) != (u16)RESET) && enablestatus) - { - /* SPI_I2S_IT is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_IT is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : SPI_I2S_ClearITPendingBit -* Description : Clears the SPIx/I2Sx interrupt pending bits. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_IT: specifies the SPI/I2S interrupt pending bit to clear. -* This parameter can be one of the following values: -* - SPI_I2S_IT_OVR: Overrun interrupt. -* - SPI_IT_MODF: Mode Fault interrupt. -* - SPI_IT_CRCERR: CRC Error interrupt. -* - I2S_IT_UDR: Underrun Error interrupt. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, u8 SPI_I2S_IT) -{ - u16 itpos = 0; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); - - /* SPI_IT_MODF pending bit clear */ - if(SPI_I2S_IT == SPI_IT_MODF) - { - /* Read SR register */ - (void)SPIx->SR; - /* Write on CR1 register */ - SPIx->CR1 |= CR1_SPE_Set; - } - /* SPI_I2S_IT_OVR or I2S_IT_UDR pending bit clear */ - else if((SPI_I2S_IT == SPI_I2S_IT_OVR) || (SPI_I2S_IT == I2S_IT_UDR)) - { - /* Read SR register */ - (void)(SPIx->SR); - } - else /* SPI_IT_CRCERR pending bit clear */ - { - /* Get the SPI/I2S IT index */ - itpos = (u16)((u16)0x01 << (SPI_I2S_IT & (u8)0x0F)); - /* Clear the selected SPI/I2S interrupt pending bits */ - SPIx->SR = (u16)~itpos; - } -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_systick.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_systick.c deleted file mode 100755 index 29ee88a..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_systick.c +++ /dev/null @@ -1,181 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_systick.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the SysTick firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_systick.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ---------------------- SysTick registers bit mask -------------------- */ -/* CTRL TICKINT Mask */ -#define CTRL_TICKINT_Set ((u32)0x00000002) -#define CTRL_TICKINT_Reset ((u32)0xFFFFFFFD) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : SysTick_CLKSourceConfig -* Description : Configures the SysTick clock source. -* Input : - SysTick_CLKSource: specifies the SysTick clock source. -* This parameter can be one of the following values: -* - SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 -* selected as SysTick clock source. -* - SysTick_CLKSource_HCLK: AHB clock selected as -* SysTick clock source. -* Output : None -* Return : None -*******************************************************************************/ -void SysTick_CLKSourceConfig(u32 SysTick_CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); - - if (SysTick_CLKSource == SysTick_CLKSource_HCLK) - { - SysTick->CTRL |= SysTick_CLKSource_HCLK; - } - else - { - SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; - } -} - -/******************************************************************************* -* Function Name : SysTick_SetReload -* Description : Sets SysTick Reload value. -* Input : - Reload: SysTick Reload new value. -* This parameter must be a number between 1 and 0xFFFFFF. -* Output : None -* Return : None -*******************************************************************************/ -void SysTick_SetReload(u32 Reload) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_RELOAD(Reload)); - - SysTick->LOAD = Reload; -} - -/******************************************************************************* -* Function Name : SysTick_CounterCmd -* Description : Enables or disables the SysTick counter. -* Input : - SysTick_Counter: new state of the SysTick counter. -* This parameter can be one of the following values: -* - SysTick_Counter_Disable: Disable counter -* - SysTick_Counter_Enable: Enable counter -* - SysTick_Counter_Clear: Clear counter value to 0 -* Output : None -* Return : None -*******************************************************************************/ -void SysTick_CounterCmd(u32 SysTick_Counter) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_COUNTER(SysTick_Counter)); - - if (SysTick_Counter == SysTick_Counter_Enable) - { - SysTick->CTRL |= SysTick_Counter_Enable; - } - else if (SysTick_Counter == SysTick_Counter_Disable) - { - SysTick->CTRL &= SysTick_Counter_Disable; - } - else /* SysTick_Counter == SysTick_Counter_Clear */ - { - SysTick->VAL = SysTick_Counter_Clear; - } -} - -/******************************************************************************* -* Function Name : SysTick_ITConfig -* Description : Enables or disables the SysTick Interrupt. -* Input : - NewState: new state of the SysTick Interrupt. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SysTick_ITConfig(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - SysTick->CTRL |= CTRL_TICKINT_Set; - } - else - { - SysTick->CTRL &= CTRL_TICKINT_Reset; - } -} - -/******************************************************************************* -* Function Name : SysTick_GetCounter -* Description : Gets SysTick counter value. -* Input : None -* Output : None -* Return : SysTick current value -*******************************************************************************/ -u32 SysTick_GetCounter(void) -{ - return(SysTick->VAL); -} - -/******************************************************************************* -* Function Name : SysTick_GetFlagStatus -* Description : Checks whether the specified SysTick flag is set or not. -* Input : - SysTick_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - SysTick_FLAG_COUNT -* - SysTick_FLAG_SKEW -* - SysTick_FLAG_NOREF -* Output : None -* Return : None -*******************************************************************************/ -FlagStatus SysTick_GetFlagStatus(u8 SysTick_FLAG) -{ - u32 statusreg = 0, tmp = 0 ; - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SYSTICK_FLAG(SysTick_FLAG)); - - /* Get the SysTick register index */ - tmp = SysTick_FLAG >> 3; - - if (tmp == 2) /* The flag to check is in CTRL register */ - { - statusreg = SysTick->CTRL; - } - else /* The flag to check is in CALIB register */ - { - statusreg = SysTick->CALIB; - } - - if ((statusreg & ((u32)1 << SysTick_FLAG)) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_tim.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_tim.c deleted file mode 100755 index 812cab0..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_tim.c +++ /dev/null @@ -1,3220 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_tim.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the TIM firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_tim.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ---------------------- TIM registers bit mask ------------------------ */ -#define CR1_CEN_Set ((u16)0x0001) -#define CR1_CEN_Reset ((u16)0x03FE) -#define CR1_UDIS_Set ((u16)0x0002) -#define CR1_UDIS_Reset ((u16)0x03FD) -#define CR1_URS_Set ((u16)0x0004) -#define CR1_URS_Reset ((u16)0x03FB) -#define CR1_OPM_Reset ((u16)0x03F7) -#define CR1_CounterMode_Mask ((u16)0x038F) -#define CR1_ARPE_Set ((u16)0x0080) -#define CR1_ARPE_Reset ((u16)0x037F) -#define CR1_CKD_Mask ((u16)0x00FF) - -#define CR2_CCPC_Set ((u16)0x0001) -#define CR2_CCPC_Reset ((u16)0xFFFE) -#define CR2_CCUS_Set ((u16)0x0004) -#define CR2_CCUS_Reset ((u16)0xFFFB) -#define CR2_CCDS_Set ((u16)0x0008) -#define CR2_CCDS_Reset ((u16)0xFFF7) -#define CR2_MMS_Mask ((u16)0xFF8F) -#define CR2_TI1S_Set ((u16)0x0080) -#define CR2_TI1S_Reset ((u16)0xFF7F) -#define CR2_OIS1_Reset ((u16)0x7EFF) -#define CR2_OIS1N_Reset ((u16)0x7DFF) -#define CR2_OIS2_Reset ((u16)0x7BFF) -#define CR2_OIS2N_Reset ((u16)0x77FF) -#define CR2_OIS3_Reset ((u16)0x6FFF) -#define CR2_OIS3N_Reset ((u16)0x5FFF) -#define CR2_OIS4_Reset ((u16)0x3FFF) - -#define SMCR_SMS_Mask ((u16)0xFFF8) -#define SMCR_ETR_Mask ((u16)0x00FF) -#define SMCR_TS_Mask ((u16)0xFF8F) -#define SMCR_MSM_Reset ((u16)0xFF7F) -#define SMCR_ECE_Set ((u16)0x4000) - -#define CCMR_CC13S_Mask ((u16)0xFFFC) -#define CCMR_CC24S_Mask ((u16)0xFCFF) -#define CCMR_TI13Direct_Set ((u16)0x0001) -#define CCMR_TI24Direct_Set ((u16)0x0100) -#define CCMR_OC13FE_Reset ((u16)0xFFFB) -#define CCMR_OC24FE_Reset ((u16)0xFBFF) -#define CCMR_OC13PE_Reset ((u16)0xFFF7) -#define CCMR_OC24PE_Reset ((u16)0xF7FF) -#define CCMR_OC13M_Mask ((u16)0xFF8F) -#define CCMR_OC24M_Mask ((u16)0x8FFF) - -#define CCMR_OC13CE_Reset ((u16)0xFF7F) -#define CCMR_OC24CE_Reset ((u16)0x7FFF) - -#define CCMR_IC13PSC_Mask ((u16)0xFFF3) -#define CCMR_IC24PSC_Mask ((u16)0xF3FF) -#define CCMR_IC13F_Mask ((u16)0xFF0F) -#define CCMR_IC24F_Mask ((u16)0x0FFF) - -#define CCMR_Offset ((u16)0x0018) -#define CCER_CCE_Set ((u16)0x0001) -#define CCER_CCNE_Set ((u16)0x0004) - -#define CCER_CC1P_Reset ((u16)0xFFFD) -#define CCER_CC2P_Reset ((u16)0xFFDF) -#define CCER_CC3P_Reset ((u16)0xFDFF) -#define CCER_CC4P_Reset ((u16)0xDFFF) - -#define CCER_CC1NP_Reset ((u16)0xFFF7) -#define CCER_CC2NP_Reset ((u16)0xFF7F) -#define CCER_CC3NP_Reset ((u16)0xF7FF) - -#define CCER_CC1E_Set ((u16)0x0001) -#define CCER_CC1E_Reset ((u16)0xFFFE) - -#define CCER_CC1NE_Reset ((u16)0xFFFB) - -#define CCER_CC2E_Set ((u16)0x0010) -#define CCER_CC2E_Reset ((u16)0xFFEF) - -#define CCER_CC2NE_Reset ((u16)0xFFBF) - -#define CCER_CC3E_Set ((u16)0x0100) -#define CCER_CC3E_Reset ((u16)0xFEFF) - -#define CCER_CC3NE_Reset ((u16)0xFBFF) - -#define CCER_CC4E_Set ((u16)0x1000) -#define CCER_CC4E_Reset ((u16)0xEFFF) - -#define BDTR_MOE_Set ((u16)0x8000) -#define BDTR_MOE_Reset ((u16)0x7FFF) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void TI1_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter); -static void TI2_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter); -static void TI3_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter); -static void TI4_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter); -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/******************************************************************************* -* Function Name : TIM_DeInit -* Description : Deinitializes the TIMx peripheral registers to their default -* reset values. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_DeInit(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - switch (*(u32*)&TIMx) - { - case TIM1_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); - break; - - case TIM2_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); - break; - - case TIM3_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); - break; - - case TIM4_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); - break; - - case TIM5_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); - break; - - case TIM6_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); - break; - - case TIM7_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); - break; - - case TIM8_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : TIM_TimeBaseInit -* Description : Initializes the TIMx Time Base Unit peripheral according to -* the specified parameters in the TIM_TimeBaseInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef -* structure that contains the configuration information for -* the specified TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); - assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); - - /* Select the Counter Mode and set the clock division */ - TIMx->CR1 &= CR1_CKD_Mask & CR1_CounterMode_Mask; - TIMx->CR1 |= (u32)TIM_TimeBaseInitStruct->TIM_ClockDivision | - TIM_TimeBaseInitStruct->TIM_CounterMode; - /* Set the Autoreload value */ - TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; - - /* Set the Prescaler value */ - TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; - - /* Generate an update event to reload the Prescaler value immediatly */ - TIMx->EGR = TIM_PSCReloadMode_Immediate; - - if (((*(u32*)&TIMx) == TIM1_BASE) || ((*(u32*)&TIMx) == TIM8_BASE)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; - } -} - -/******************************************************************************* -* Function Name : TIM_OC1Init -* Description : Initializes the TIMx Channel1 according to the specified -* parameters in the TIM_OCInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= CCER_CC1E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC13M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC1P_Reset; - - /* Set the Output Compare Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; - - /* Set the Output State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputState; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; - - if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= CCER_CC1NP_Reset; - - /* Set the Output N Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; - - /* Reset the Output N State */ - tmpccer &= CCER_CC1NE_Reset; - - /* Set the Output N State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputNState; - - /* Reset the Ouput Compare and Output Compare N IDLE State */ - tmpcr2 &= CR2_OIS1_Reset; - tmpcr2 &= CR2_OIS1N_Reset; - - /* Set the Output Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; - - /* Set the Output N Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC2Init -* Description : Initializes the TIMx Channel2 according to the specified -* parameters in the TIM_OCInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= CCER_CC2E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC24M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= (u16)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC2P_Reset; - - /* Set the Output Compare Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCPolarity << 4); - - /* Set the Output State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputState << 4); - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; - - if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= CCER_CC2NP_Reset; - - /* Set the Output N Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCNPolarity << 4); - - /* Reset the Output N State */ - tmpccer &= CCER_CC2NE_Reset; - - /* Set the Output N State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputNState << 4); - - /* Reset the Ouput Compare and Output Compare N IDLE State */ - tmpcr2 &= CR2_OIS2_Reset; - tmpcr2 &= CR2_OIS2N_Reset; - - /* Set the Output Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCIdleState << 2); - - /* Set the Output N Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCNIdleState << 2); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC3Init -* Description : Initializes the TIMx Channel3 according to the specified -* parameters in the TIM_OCInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= CCER_CC3E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC13M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC3P_Reset; - - /* Set the Output Compare Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCPolarity << 8); - - /* Set the Output State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputState << 8); - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; - - if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= CCER_CC3NP_Reset; - - /* Set the Output N Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCNPolarity << 8); - - /* Reset the Output N State */ - tmpccer &= CCER_CC3NE_Reset; - - /* Set the Output N State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputNState << 8); - - /* Reset the Ouput Compare and Output Compare N IDLE State */ - tmpcr2 &= CR2_OIS3_Reset; - tmpcr2 &= CR2_OIS3N_Reset; - - /* Set the Output Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCIdleState << 4); - - /* Set the Output N Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCNIdleState << 4); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC4Init -* Description : Initializes the TIMx Channel4 according to the specified -* parameters in the TIM_OCInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 2: Reset the CC4E Bit */ - TIMx->CCER &= CCER_CC4E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC24M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= (u16)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC4P_Reset; - - /* Set the Output Compare Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCPolarity << 12); - - /* Set the Output State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputState << 12); - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; - - if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Ouput Compare IDLE State */ - tmpcr2 &= CR2_OIS4_Reset; - - /* Set the Output Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCIdleState << 6); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_ICInit -* Description : Initializes the TIM peripheral according to the specified -* parameters in the TIM_ICInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel)); - assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); - assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); - - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) - { - /* TI2 Configuration */ - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) - { - /* TI3 Configuration */ - TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - /* TI4 Configuration */ - TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/******************************************************************************* -* Function Name : TIM_PWMIConfig -* Description : Configures the TIM peripheral according to the specified -* parameters in the TIM_ICInitStruct to measure an external PWM -* signal. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - u16 icoppositepolarity = TIM_ICPolarity_Rising; - u16 icoppositeselection = TIM_ICSelection_DirectTI; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Select the Opposite Input Polarity */ - if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) - { - icoppositepolarity = TIM_ICPolarity_Falling; - } - else - { - icoppositepolarity = TIM_ICPolarity_Rising; - } - - /* Select the Opposite Input */ - if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) - { - icoppositeselection = TIM_ICSelection_IndirectTI; - } - else - { - icoppositeselection = TIM_ICSelection_DirectTI; - } - - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - - /* TI2 Configuration */ - TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - /* TI2 Configuration */ - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - - /* TI1 Configuration */ - TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/******************************************************************************* -* Function Name : TIM_BDTRConfig -* Description : Configures the: Break feature, dead time, Lock level, the OSSI, -* the OSSR State and the AOE(automatic output enable). -* Input :- TIMx: where x can be 1 or 8 to select the TIM -* - TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef -* structure that contains the BDTR Register configuration -* information for the TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); - assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); - assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); - assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); - assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); - - /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - - TIMx->BDTR = (u32)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | - TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | - TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | - TIM_BDTRInitStruct->TIM_AutomaticOutput; - -} - -/******************************************************************************* -* Function Name : TIM_TimeBaseStructInit -* Description : Fills each TIM_TimeBaseInitStruct member with its default value. -* Input : - TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - /* Set the default configuration */ - TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF; - TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; - TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; - TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; - TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; -} - -/******************************************************************************* -* Function Name : TIM_OCStructInit -* Description : Fills each TIM_OCInitStruct member with its default value. -* Input : - TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - /* Set the default configuration */ - TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; - TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; - TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; - TIM_OCInitStruct->TIM_Pulse = 0x0000; - TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; - TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; -} - -/******************************************************************************* -* Function Name : TIM_ICStructInit -* Description : Fills each TIM_ICInitStruct member with its default value. -* Input : - TIM_ICInitStruct : pointer to a TIM_ICInitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Set the default configuration */ - TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; - TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; - TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; - TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; - TIM_ICInitStruct->TIM_ICFilter = 0x00; -} - -/******************************************************************************* -* Function Name : TIM_BDTRStructInit -* Description : Fills each TIM_BDTRInitStruct member with its default value. -* Input : - TIM_BDTRInitStruct : pointer to a TIM_BDTRInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) -{ - /* Set the default configuration */ - TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; - TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; - TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; - TIM_BDTRInitStruct->TIM_DeadTime = 0x00; - TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; - TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; - TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; -} - -/******************************************************************************* -* Function Name : TIM_Cmd -* Description : Enables or disables the specified TIM peripheral. -* Input : - TIMx: where x can be 1 to 8 to select the TIMx peripheral. -* - NewState: new state of the TIMx peripheral. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the TIM Counter */ - TIMx->CR1 |= CR1_CEN_Set; - } - else - { - /* Disable the TIM Counter */ - TIMx->CR1 &= CR1_CEN_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_CtrlPWMOutputs -* Description : Enables or disables the TIM peripheral Main Outputs. -* Input :- TIMx: where x can be 1 or 8 to select the TIMx peripheral. -* - NewState: new state of the TIM peripheral Main Outputs. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the TIM Main Output */ - TIMx->BDTR |= BDTR_MOE_Set; - } - else - { - /* Disable the TIM Main Output */ - TIMx->BDTR &= BDTR_MOE_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_ITConfig -* Description : Enables or disables the specified TIM interrupts. -* Input : - TIMx: where x can be 1 to 8 to select the TIMx peripheral. -* - TIM_IT: specifies the TIM interrupts sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - TIM_IT_Update: TIM update Interrupt source -* - TIM_IT_CC1: TIM Capture Compare 1 Interrupt source -* - TIM_IT_CC2: TIM Capture Compare 2 Interrupt source -* - TIM_IT_CC3: TIM Capture Compare 3 Interrupt source -* - TIM_IT_CC4: TIM Capture Compare 4 Interrupt source -* - TIM_IT_COM: TIM Commutation Interrupt source -* - TIM_IT_Trigger: TIM Trigger Interrupt source -* - TIM_IT_Break: TIM Break Interrupt source -* - NewState: new state of the TIM interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ITConfig(TIM_TypeDef* TIMx, u16 TIM_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_IT(TIM_IT)); - assert_param(IS_TIM_PERIPH_IT((TIMx), (TIM_IT))); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Interrupt sources */ - TIMx->DIER |= TIM_IT; - } - else - { - /* Disable the Interrupt sources */ - TIMx->DIER &= (u16)~TIM_IT; - } -} - -/******************************************************************************* -* Function Name : TIM_GenerateEvent -* Description : Configures the TIMx event to be generate by software. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_EventSource: specifies the event source. -* This parameter can be one or more of the following values: -* - TIM_EventSource_Update: Timer update Event source -* - TIM_EventSource_CC1: Timer Capture Compare 1 Event source -* - TIM_EventSource_CC2: Timer Capture Compare 2 Event source -* - TIM_EventSource_CC3: Timer Capture Compare 3 Event source -* - TIM_EventSource_CC4: Timer Capture Compare 4 Event source -* - TIM_EventSource_Trigger: Timer Trigger Event source -* Output : None -* Return : None -*******************************************************************************/ -void TIM_GenerateEvent(TIM_TypeDef* TIMx, u16 TIM_EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); - assert_param(IS_TIM_PERIPH_EVENT((TIMx), (TIM_EventSource))); - - /* Set the event sources */ - TIMx->EGR = TIM_EventSource; -} - -/******************************************************************************* -* Function Name : TIM_DMAConfig -* Description : Configures the TIMx’s DMA interface. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_DMABase: DMA Base address. -* This parameter can be one of the following values: -* - TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR, -* TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR, -* TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER, -* TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR, -* TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2, -* TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR, -* TIM_DMABase_DCR. -* - TIM_DMABurstLength: DMA Burst length. -* This parameter can be one value between: -* TIM_DMABurstLength_1Byte and TIM_DMABurstLength_18Bytes. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_DMAConfig(TIM_TypeDef* TIMx, u16 TIM_DMABase, u16 TIM_DMABurstLength) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); - assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); - - /* Set the DMA Base and the DMA Burst Length */ - TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; -} - -/******************************************************************************* -* Function Name : TIM_DMACmd -* Description : Enables or disables the TIMx’s DMA Requests. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_DMASources: specifies the DMA Request sources. -* This parameter can be any combination of the following values: -* - TIM_DMA_Update: TIM update Interrupt source -* - TIM_DMA_CC1: TIM Capture Compare 1 DMA source -* - TIM_DMA_CC2: TIM Capture Compare 2 DMA source -* - TIM_DMA_CC3: TIM Capture Compare 3 DMA source -* - TIM_DMA_CC4: TIM Capture Compare 4 DMA source -* - TIM_DMA_COM: TIM Commutation DMA source -* - TIM_DMA_Trigger: TIM Trigger DMA source -* - NewState: new state of the DMA Request sources. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_DMACmd(TIM_TypeDef* TIMx, u16 TIM_DMASource, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); - assert_param(IS_TIM_PERIPH_DMA(TIMx, TIM_DMASource)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the DMA sources */ - TIMx->DIER |= TIM_DMASource; - } - else - { - /* Disable the DMA sources */ - TIMx->DIER &= (u16)~TIM_DMASource; - } -} - -/******************************************************************************* -* Function Name : TIM_InternalClockConfig -* Description : Configures the TIMx interrnal Clock -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_InternalClockConfig(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Disable slave mode to clock the prescaler directly with the internal clock */ - TIMx->SMCR &= SMCR_SMS_Mask; -} -/******************************************************************************* -* Function Name : TIM_ITRxExternalClockConfig -* Description : Configures the TIMx Internal Trigger as External Clock -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ITRSource: Trigger source. -* This parameter can be one of the following values: -* - TIM_TS_ITR0: Internal Trigger 0 -* - TIM_TS_ITR1: Internal Trigger 1 -* - TIM_TS_ITR2: Internal Trigger 2 -* - TIM_TS_ITR3: Internal Trigger 3 -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); - - /* Select the Internal Trigger */ - TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); - - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} -/******************************************************************************* -* Function Name : TIM_TIxExternalClockConfig -* Description : Configures the TIMx Trigger as External Clock -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_TIxExternalCLKSource: Trigger source. -* This parameter can be one of the following values: -* - TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector -* - TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 -* - TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 -* - TIM_ICPolarity: specifies the TIx Polarity. -* This parameter can be: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - ICFilter : specifies the filter value. -* This parameter must be a value between 0x0 and 0xF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_TIxExternalCLKSource, - u16 TIM_ICPolarity, u16 ICFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource)); - assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); - assert_param(IS_TIM_IC_FILTER(ICFilter)); - - /* Configure the Timer Input Clock Source */ - if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) - { - TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - else - { - TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - - /* Select the Trigger source */ - TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); - - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} - -/******************************************************************************* -* Function Name : TIM_ETRClockMode1Config -* Description : Configures the External clock Mode1 -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ExtTRGPrescaler: The external Trigger Prescaler. -* It can be one of the following values: -* - TIM_ExtTRGPSC_OFF -* - TIM_ExtTRGPSC_DIV2 -* - TIM_ExtTRGPSC_DIV4 -* - TIM_ExtTRGPSC_DIV8. -* - TIM_ExtTRGPolarity: The external Trigger Polarity. -* It can be one of the following values: -* - TIM_ExtTRGPolarity_Inverted -* - TIM_ExtTRGPolarity_NonInverted -* - ExtTRGFilter: External Trigger Filter. -* This parameter must be a value between 0x00 and 0x0F -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, - u16 ExtTRGFilter) -{ - u16 tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Reset the SMS Bits */ - tmpsmcr &= SMCR_SMS_Mask; - /* Select the External clock mode1 */ - tmpsmcr |= TIM_SlaveMode_External1; - - /* Select the Trigger selection : ETRF */ - tmpsmcr &= SMCR_TS_Mask; - tmpsmcr |= TIM_TS_ETRF; - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/******************************************************************************* -* Function Name : TIM_ETRClockMode2Config -* Description : Configures the External clock Mode2 -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ExtTRGPrescaler: The external Trigger Prescaler. -* It can be one of the following values: -* - TIM_ExtTRGPSC_OFF -* - TIM_ExtTRGPSC_DIV2 -* - TIM_ExtTRGPSC_DIV4 -* - TIM_ExtTRGPSC_DIV8 -* - TIM_ExtTRGPolarity: The external Trigger Polarity. -* It can be one of the following values: -* - TIM_ExtTRGPolarity_Inverted -* - TIM_ExtTRGPolarity_NonInverted -* - ExtTRGFilter: External Trigger Filter. -* This parameter must be a value between 0x00 and 0x0F -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, - u16 TIM_ExtTRGPolarity, u16 ExtTRGFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - - /* Enable the External clock mode2 */ - TIMx->SMCR |= SMCR_ECE_Set; -} - -/******************************************************************************* -* Function Name : TIM_ETRConfig -* Description : Configures the TIMx External Trigger (ETR). -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ExtTRGPrescaler: The external Trigger Prescaler. -* This parameter can be one of the following values: -* - TIM_ExtTRGPSC_OFF -* - TIM_ExtTRGPSC_DIV2 -* - TIM_ExtTRGPSC_DIV4 -* - TIM_ExtTRGPSC_DIV8 -* - TIM_ExtTRGPolarity: The external Trigger Polarity. -* This parameter can be one of the following values: -* - TIM_ExtTRGPolarity_Inverted -* - TIM_ExtTRGPolarity_NonInverted -* - ExtTRGFilter: External Trigger Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ETRConfig(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, - u16 ExtTRGFilter) -{ - u16 tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - - tmpsmcr = TIMx->SMCR; - - /* Reset the ETR Bits */ - tmpsmcr &= SMCR_ETR_Mask; - - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= TIM_ExtTRGPrescaler | TIM_ExtTRGPolarity | (u16)(ExtTRGFilter << 8); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/******************************************************************************* -* Function Name : TIM_PrescalerConfig -* Description : Configures the TIMx Prescaler. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - Prescaler: specifies the Prescaler Register value -* - TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode -* This parameter can be one of the following values: -* - TIM_PSCReloadMode_Update: The Prescaler is loaded at -* the update event. -* - TIM_PSCReloadMode_Immediate: The Prescaler is loaded -* immediatly. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, u16 Prescaler, u16 TIM_PSCReloadMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); - - /* Set the Prescaler value */ - TIMx->PSC = Prescaler; - - /* Set or reset the UG Bit */ - TIMx->EGR = TIM_PSCReloadMode; -} - -/******************************************************************************* -* Function Name : TIM_CounterModeConfig -* Description : Specifies the TIMx Counter Mode to be used. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_CounterMode: specifies the Counter Mode to be used -* This parameter can be one of the following values: -* - TIM_CounterMode_Up: TIM Up Counting Mode -* - TIM_CounterMode_Down: TIM Down Counting Mode -* - TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 -* - TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 -* - TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, u16 TIM_CounterMode) -{ - u16 tmpcr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); - - tmpcr1 = TIMx->CR1; - - /* Reset the CMS and DIR Bits */ - tmpcr1 &= CR1_CounterMode_Mask; - - /* Set the Counter Mode */ - tmpcr1 |= TIM_CounterMode; - - /* Write to TIMx CR1 register */ - TIMx->CR1 = tmpcr1; -} - -/******************************************************************************* -* Function Name : TIM_SelectInputTrigger -* Description : Selects the Input Trigger source -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_InputTriggerSource: The Input Trigger source. -* This parameter can be one of the following values: -* - TIM_TS_ITR0: Internal Trigger 0 -* - TIM_TS_ITR1: Internal Trigger 1 -* - TIM_TS_ITR2: Internal Trigger 2 -* - TIM_TS_ITR3: Internal Trigger 3 -* - TIM_TS_TI1F_ED: TI1 Edge Detector -* - TIM_TS_TI1FP1: Filtered Timer Input 1 -* - TIM_TS_TI2FP2: Filtered Timer Input 2 -* - TIM_TS_ETRF: External Trigger input -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource) -{ - u16 tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Reset the TS Bits */ - tmpsmcr &= SMCR_TS_Mask; - - /* Set the Input Trigger source */ - tmpsmcr |= TIM_InputTriggerSource; - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/******************************************************************************* -* Function Name : TIM_EncoderInterfaceConfig -* Description : Configures the TIMx Encoder Interface. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_EncoderMode: specifies the TIMx Encoder Mode. -* This parameter can be one of the following values: -* - TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge -* depending on TI2FP2 level. -* - TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge -* depending on TI1FP1 level. -* - TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and -* TI2FP2 edges depending on the level of the other input. -* - TIM_IC1Polarity: specifies the IC1 Polarity -* This parmeter can be one of the following values: -* - TIM_ICPolarity_Falling: IC Falling edge. -* - TIM_ICPolarity_Rising: IC Rising edge. -* - TIM_IC2Polarity: specifies the IC2 Polarity -* This parmeter can be one of the following values: -* - TIM_ICPolarity_Falling: IC Falling edge. -* - TIM_ICPolarity_Rising: IC Rising edge. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, u16 TIM_EncoderMode, - u16 TIM_IC1Polarity, u16 TIM_IC2Polarity) -{ - u16 tmpsmcr = 0; - u16 tmpccmr1 = 0; - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Set the encoder Mode */ - tmpsmcr &= SMCR_SMS_Mask; - tmpsmcr |= TIM_EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= CCMR_CC13S_Mask & CCMR_CC24S_Mask; - tmpccmr1 |= CCMR_TI13Direct_Set | CCMR_TI24Direct_Set; - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= CCER_CC1P_Reset & CCER_CC2P_Reset; - tmpccer |= (TIM_IC1Polarity | (u16)(TIM_IC2Polarity << 4)); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_ForcedOC1Config -* Description : Forces the TIMx output 1 waveform to active or inactive level. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ForcedAction: specifies the forced Action to be set to -* the output waveform. -* This parameter can be one of the following values: -* - TIM_ForcedAction_Active: Force active level on OC1REF -* - TIM_ForcedAction_InActive: Force inactive level on -* OC1REF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1M Bits */ - tmpccmr1 &= CCMR_OC13M_Mask; - - /* Configure The Forced output Mode */ - tmpccmr1 |= TIM_ForcedAction; - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_ForcedOC2Config -* Description : Forces the TIMx output 2 waveform to active or inactive level. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ForcedAction: specifies the forced Action to be set to -* the output waveform. -* This parameter can be one of the following values: -* - TIM_ForcedAction_Active: Force active level on OC2REF -* - TIM_ForcedAction_InActive: Force inactive level on -* OC2REF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2M Bits */ - tmpccmr1 &= CCMR_OC24M_Mask; - - /* Configure The Forced output Mode */ - tmpccmr1 |= (u16)(TIM_ForcedAction << 8); - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_ForcedOC3Config -* Description : Forces the TIMx output 3 waveform to active or inactive level. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ForcedAction: specifies the forced Action to be set to -* the output waveform. -* This parameter can be one of the following values: -* - TIM_ForcedAction_Active: Force active level on OC3REF -* - TIM_ForcedAction_InActive: Force inactive level on -* OC3REF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC1M Bits */ - tmpccmr2 &= CCMR_OC13M_Mask; - - /* Configure The Forced output Mode */ - tmpccmr2 |= TIM_ForcedAction; - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_ForcedOC4Config -* Description : Forces the TIMx output 4 waveform to active or inactive level. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ForcedAction: specifies the forced Action to be set to -* the output waveform. -* This parameter can be one of the following values: -* - TIM_ForcedAction_Active: Force active level on OC4REF -* - TIM_ForcedAction_InActive: Force inactive level on -* OC4REF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC2M Bits */ - tmpccmr2 &= CCMR_OC24M_Mask; - - /* Configure The Forced output Mode */ - tmpccmr2 |= (u16)(TIM_ForcedAction << 8); - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_ARRPreloadConfig -* Description : Enables or disables TIMx peripheral Preload register on ARR. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - NewState: new state of the TIMx peripheral Preload register -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the ARR Preload Bit */ - TIMx->CR1 |= CR1_ARPE_Set; - } - else - { - /* Reset the ARR Preload Bit */ - TIMx->CR1 &= CR1_ARPE_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_SelectCOM -* Description : Selects the TIM peripheral Commutation event. -* Input :- TIMx: where x can be 1 or 8 to select the TIMx peripheral -* - NewState: new state of the Commutation event. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the COM Bit */ - TIMx->CR2 |= CR2_CCUS_Set; - } - else - { - /* Reset the COM Bit */ - TIMx->CR2 &= CR2_CCUS_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_SelectCCDMA -* Description : Selects the TIMx peripheral Capture Compare DMA source. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - NewState: new state of the Capture Compare DMA source -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the CCDS Bit */ - TIMx->CR2 |= CR2_CCDS_Set; - } - else - { - /* Reset the CCDS Bit */ - TIMx->CR2 &= CR2_CCDS_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_CCPreloadControl -* Description : Sets or Resets the TIM peripheral Capture Compare Preload -* Control bit. -* Input :- TIMx: where x can be 1 or 8 to select the TIMx peripheral -* - NewState: new state of the Capture Compare Preload Control bit -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the CCPC Bit */ - TIMx->CR2 |= CR2_CCPC_Set; - } - else - { - /* Reset the CCPC Bit */ - TIMx->CR2 &= CR2_CCPC_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_OC1PreloadConfig -* Description : Enables or disables the TIMx peripheral Preload register on CCR1. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPreload: new state of the TIMx peripheral Preload -* register -* This parameter can be one of the following values: -* - TIM_OCPreload_Enable -* - TIM_OCPreload_Disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1PE Bit */ - tmpccmr1 &= CCMR_OC13PE_Reset; - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= TIM_OCPreload; - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_OC2PreloadConfig -* Description : Enables or disables the TIMx peripheral Preload register on CCR2. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPreload: new state of the TIMx peripheral Preload -* register -* This parameter can be one of the following values: -* - TIM_OCPreload_Enable -* - TIM_OCPreload_Disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2PE Bit */ - tmpccmr1 &= CCMR_OC24PE_Reset; - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= (u16)(TIM_OCPreload << 8); - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_OC3PreloadConfig -* Description : Enables or disables the TIMx peripheral Preload register on CCR3. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPreload: new state of the TIMx peripheral Preload -* register -* This parameter can be one of the following values: -* - TIM_OCPreload_Enable -* - TIM_OCPreload_Disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC3PE Bit */ - tmpccmr2 &= CCMR_OC13PE_Reset; - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= TIM_OCPreload; - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_OC4PreloadConfig -* Description : Enables or disables the TIMx peripheral Preload register on CCR4. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPreload: new state of the TIMx peripheral Preload -* register -* This parameter can be one of the following values: -* - TIM_OCPreload_Enable -* - TIM_OCPreload_Disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC4PE Bit */ - tmpccmr2 &= CCMR_OC24PE_Reset; - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= (u16)(TIM_OCPreload << 8); - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_OC1FastConfig -* Description : Configures the TIMx Output Compare 1 Fast feature. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCFast: new state of the Output Compare Fast Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCFast_Enable: TIM output compare fast enable -* - TIM_OCFast_Disable: TIM output compare fast disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1FE Bit */ - tmpccmr1 &= CCMR_OC13FE_Reset; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= TIM_OCFast; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_OC2FastConfig -* Description : Configures the TIMx Output Compare 2 Fast feature. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCFast: new state of the Output Compare Fast Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCFast_Enable: TIM output compare fast enable -* - TIM_OCFast_Disable: TIM output compare fast disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2FE Bit */ - tmpccmr1 &= CCMR_OC24FE_Reset; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= (u16)(TIM_OCFast << 8); - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_OC3FastConfig -* Description : Configures the TIMx Output Compare 3 Fast feature. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCFast: new state of the Output Compare Fast Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCFast_Enable: TIM output compare fast enable -* - TIM_OCFast_Disable: TIM output compare fast disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC3FE Bit */ - tmpccmr2 &= CCMR_OC13FE_Reset; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= TIM_OCFast; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_OC4FastConfig -* Description : Configures the TIMx Output Compare 4 Fast feature. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCFast: new state of the Output Compare Fast Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCFast_Enable: TIM output compare fast enable -* - TIM_OCFast_Disable: TIM output compare fast disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC4FE Bit */ - tmpccmr2 &= CCMR_OC24FE_Reset; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= (u16)(TIM_OCFast << 8); - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_ClearOC1Ref -* Description : Clears or safeguards the OCREF1 signal on an external event -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCClear: new state of the Output Compare Clear Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCClear_Enable: TIM Output clear enable -* - TIM_OCClear_Disable: TIM Output clear disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1CE Bit */ - tmpccmr1 &= CCMR_OC13CE_Reset; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= TIM_OCClear; - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_ClearOC2Ref -* Description : Clears or safeguards the OCREF2 signal on an external event -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCClear: new state of the Output Compare Clear Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCClear_Enable: TIM Output clear enable -* - TIM_OCClear_Disable: TIM Output clear disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2CE Bit */ - tmpccmr1 &= CCMR_OC24CE_Reset; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= (u16)(TIM_OCClear << 8); - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_ClearOC3Ref -* Description : Clears or safeguards the OCREF3 signal on an external event -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCClear: new state of the Output Compare Clear Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCClear_Enable: TIM Output clear enable -* - TIM_OCClear_Disable: TIM Output clear disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC3CE Bit */ - tmpccmr2 &= CCMR_OC13CE_Reset; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= TIM_OCClear; - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_ClearOC4Ref -* Description : Clears or safeguards the OCREF4 signal on an external event -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCClear: new state of the Output Compare Clear Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCClear_Enable: TIM Output clear enable -* - TIM_OCClear_Disable: TIM Output clear disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC4CE Bit */ - tmpccmr2 &= CCMR_OC24CE_Reset; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= (u16)(TIM_OCClear << 8); - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_OC1PolarityConfig -* Description : Configures the TIMx channel 1 polarity. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPolarity: specifies the OC1 Polarity -* This parmeter can be one of the following values: -* - TIM_OCPolarity_High: Output Compare active high -* - TIM_OCPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC1P Bit */ - tmpccer &= CCER_CC1P_Reset; - tmpccer |= TIM_OCPolarity; - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC1NPolarityConfig -* Description : Configures the TIMx Channel 1N polarity. -* Input : - TIMx: where x can be 1 or 8 to select the TIM peripheral. -* - TIM_OCNPolarity: specifies the OC1N Polarity -* This parmeter can be one of the following values: -* - TIM_OCNPolarity_High: Output Compare active high -* - TIM_OCNPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC1NP Bit */ - tmpccer &= CCER_CC1NP_Reset; - tmpccer |= TIM_OCNPolarity; - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC2PolarityConfig -* Description : Configures the TIMx channel 2 polarity. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPolarity: specifies the OC2 Polarity -* This parmeter can be one of the following values: -* - TIM_OCPolarity_High: Output Compare active high -* - TIM_OCPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC2P Bit */ - tmpccer &= CCER_CC2P_Reset; - tmpccer |= (u16)(TIM_OCPolarity << 4); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC2NPolarityConfig -* Description : Configures the TIMx Channel 2N polarity. -* Input : - TIMx: where x can be 1 or 8 to select the TIM peripheral. -* - TIM_OCNPolarity: specifies the OC2N Polarity -* This parmeter can be one of the following values: -* - TIM_OCNPolarity_High: Output Compare active high -* - TIM_OCNPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC2NP Bit */ - tmpccer &= CCER_CC2NP_Reset; - tmpccer |= (u16)(TIM_OCNPolarity << 4); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC3PolarityConfig -* Description : Configures the TIMx channel 3 polarity. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPolarity: specifies the OC3 Polarity -* This parmeter can be one of the following values: -* - TIM_OCPolarity_High: Output Compare active high -* - TIM_OCPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC3P Bit */ - tmpccer &= CCER_CC3P_Reset; - tmpccer |= (u16)(TIM_OCPolarity << 8); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC3NPolarityConfig -* Description : Configures the TIMx Channel 3N polarity. -* Input : - TIMx: where x can be 1 or 8 to select the TIM peripheral. -* - TIM_OCNPolarity: specifies the OC3N Polarity -* This parmeter can be one of the following values: -* - TIM_OCNPolarity_High: Output Compare active high -* - TIM_OCNPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC3NP Bit */ - tmpccer &= CCER_CC3NP_Reset; - tmpccer |= (u16)(TIM_OCNPolarity << 8); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC4PolarityConfig -* Description : Configures the TIMx channel 4 polarity. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPolarity: specifies the OC4 Polarity -* This parmeter can be one of the following values: -* - TIM_OCPolarity_High: Output Compare active high -* - TIM_OCPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC4P Bit */ - tmpccer &= CCER_CC4P_Reset; - tmpccer |= (u16)(TIM_OCPolarity << 12); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_CCxCmd -* Description : Enables or disables the TIM Capture Compare Channel x. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_Channel: specifies the TIM Channel -* This parmeter can be one of the following values: -* - TIM_Channel_1: TIM Channel 1 -* - TIM_Channel_2: TIM Channel 2 -* - TIM_Channel_3: TIM Channel 3 -* - TIM_Channel_4: TIM Channel 4 -* - TIM_CCx: specifies the TIM Channel CCxE bit new state. -* This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CCxCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCX(TIM_CCx)); - - /* Reset the CCxE Bit */ - TIMx->CCER &= (u16)(~((u16)(CCER_CCE_Set << TIM_Channel))); - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (u16)(TIM_CCx << TIM_Channel); -} - -/******************************************************************************* -* Function Name : TIM_CCxNCmd -* Description : Enables or disables the TIM Capture Compare Channel xN. -* Input :- TIMx: where x can be 1 or 8 to select the TIM peripheral. -* - TIM_Channel: specifies the TIM Channel -* This parmeter can be one of the following values: -* - TIM_Channel_1: TIM Channel 1 -* - TIM_Channel_2: TIM Channel 2 -* - TIM_Channel_3: TIM Channel 3 -* - TIM_CCx: specifies the TIM Channel CCxNE bit new state. -* This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CCxNCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCxN) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCXN(TIM_CCxN)); - - /* Reset the CCxNE Bit */ - TIMx->CCER &= (u16)(~((u16)(CCER_CCNE_Set << TIM_Channel))); - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (u16)(TIM_CCxN << TIM_Channel); -} - -/******************************************************************************* -* Function Name : TIM_SelectOCxM -* Description : Selects the TIM Ouput Compare Mode. -* This function disables the selected channel before changing -* the Ouput Compare Mode. User has to enable this channel using -* TIM_CCxCmd and TIM_CCxNCmd functions. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_Channel: specifies the TIM Channel -* This parmeter can be one of the following values: -* - TIM_Channel_1: TIM Channel 1 -* - TIM_Channel_2: TIM Channel 2 -* - TIM_Channel_3: TIM Channel 3 -* - TIM_Channel_4: TIM Channel 4 -* - TIM_OCMode: specifies the TIM Output Compare Mode. -* This paramter can be one of the following values: -* - TIM_OCMode_Timing -* - TIM_OCMode_Active -* - TIM_OCMode_Toggle -* - TIM_OCMode_PWM1 -* - TIM_OCMode_PWM2 -* - TIM_ForcedAction_Active -* - TIM_ForcedAction_InActive -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectOCxM(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_OCMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_OCM(TIM_OCMode)); - - /* Disable the Channel: Reset the CCxE Bit */ - TIMx->CCER &= (u16)(~((u16)(CCER_CCE_Set << TIM_Channel))); - - if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) - { - /* Reset the OCxM bits in the CCMRx register */ - *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + (TIM_Channel>>1))) &= CCMR_OC13M_Mask; - - /* Configure the OCxM bits in the CCMRx register */ - *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + (TIM_Channel>>1))) = TIM_OCMode; - - } - else - { - /* Reset the OCxM bits in the CCMRx register */ - *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + ((u16)(TIM_Channel - 4)>> 1))) &= CCMR_OC24M_Mask; - - /* Configure the OCxM bits in the CCMRx register */ - *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + ((u16)(TIM_Channel - 4)>> 1))) = (u16)(TIM_OCMode << 8); - } -} - -/******************************************************************************* -* Function Name : TIM_UpdateDisableConfig -* Description : Enables or Disables the TIMx Update event. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - NewState: new state of the TIMx UDIS bit -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the Update Disable Bit */ - TIMx->CR1 |= CR1_UDIS_Set; - } - else - { - /* Reset the Update Disable Bit */ - TIMx->CR1 &= CR1_UDIS_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_UpdateRequestConfig -* Description : Configures the TIMx Update Request Interrupt source. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_UpdateSource: specifies the Update source. -* This parameter can be one of the following values: -* - TIM_UpdateSource_Regular -* - TIM_UpdateSource_Global -* Output : None -* Return : None -*******************************************************************************/ -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, u16 TIM_UpdateSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); - - if (TIM_UpdateSource != TIM_UpdateSource_Global) - { - /* Set the URS Bit */ - TIMx->CR1 |= CR1_URS_Set; - } - else - { - /* Reset the URS Bit */ - TIMx->CR1 &= CR1_URS_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_SelectHallSensor -* Description : Enables or disables the TIMx’s Hall sensor interface. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. -* - NewState: new state of the TIMx Hall sensor interface. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the TI1S Bit */ - TIMx->CR2 |= CR2_TI1S_Set; - } - else - { - /* Reset the TI1S Bit */ - TIMx->CR2 &= CR2_TI1S_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_SelectOnePulseMode -* Description : Selects the TIMx’s One Pulse Mode. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_OPMode: specifies the OPM Mode to be used. -* This parameter can be one of the following values: -* - TIM_OPMode_Single -* - TIM_OPMode_Repetitive -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, u16 TIM_OPMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); - - /* Reset the OPM Bit */ - TIMx->CR1 &= CR1_OPM_Reset; - - /* Configure the OPM Mode */ - TIMx->CR1 |= TIM_OPMode; -} - -/******************************************************************************* -* Function Name : TIM_SelectOutputTrigger -* Description : Selects the TIMx Trigger Output Mode. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_TRGOSource: specifies the Trigger Output source. -* This paramter can be as follow: -* 1/ For TIM1 to TIM8: -* - TIM_TRGOSource_Reset -* - TIM_TRGOSource_Enable -* - TIM_TRGOSource_Update -* 2/ These parameters are available for all TIMx except -* TIM6 and TIM7: -* - TIM_TRGOSource_OC1 -* - TIM_TRGOSource_OC1Ref -* - TIM_TRGOSource_OC2Ref -* - TIM_TRGOSource_OC3Ref -* - TIM_TRGOSource_OC4Ref -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, u16 TIM_TRGOSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); - assert_param(IS_TIM_PERIPH_TRGO(TIMx, TIM_TRGOSource)); - - /* Reset the MMS Bits */ - TIMx->CR2 &= CR2_MMS_Mask; - - /* Select the TRGO source */ - TIMx->CR2 |= TIM_TRGOSource; -} - -/******************************************************************************* -* Function Name : TIM_SelectSlaveMode -* Description : Selects the TIMx Slave Mode. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_SlaveMode: specifies the Timer Slave Mode. -* This paramter can be one of the following values: -* - TIM_SlaveMode_Reset -* - TIM_SlaveMode_Gated -* - TIM_SlaveMode_Trigger -* - TIM_SlaveMode_External1 -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, u16 TIM_SlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); - - /* Reset the SMS Bits */ - TIMx->SMCR &= SMCR_SMS_Mask; - - /* Select the Slave Mode */ - TIMx->SMCR |= TIM_SlaveMode; -} - -/******************************************************************************* -* Function Name : TIM_SelectMasterSlaveMode -* Description : Sets or Resets the TIMx Master/Slave Mode. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. -* This paramter can be one of the following values: -* - TIM_MasterSlaveMode_Enable: synchronization between the -* current timer and its slaves (through TRGO). -* - TIM_MasterSlaveMode_Disable: No action -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, u16 TIM_MasterSlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); - - /* Reset the MSM Bit */ - TIMx->SMCR &= SMCR_MSM_Reset; - - /* Set or Reset the MSM Bit */ - TIMx->SMCR |= TIM_MasterSlaveMode; -} - -/******************************************************************************* -* Function Name : TIM_SetCounter -* Description : Sets the TIMx Counter Register value -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - Counter: specifies the Counter register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCounter(TIM_TypeDef* TIMx, u16 Counter) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Set the Counter Register value */ - TIMx->CNT = Counter; -} - -/******************************************************************************* -* Function Name : TIM_SetAutoreload -* Description : Sets the TIMx Autoreload Register value -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - Autoreload: specifies the Autoreload register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetAutoreload(TIM_TypeDef* TIMx, u16 Autoreload) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Set the Autoreload Register value */ - TIMx->ARR = Autoreload; -} - -/******************************************************************************* -* Function Name : TIM_SetCompare1 -* Description : Sets the TIMx Capture Compare1 Register value -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - Compare1: specifies the Capture Compare1 register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCompare1(TIM_TypeDef* TIMx, u16 Compare1) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Set the Capture Compare1 Register value */ - TIMx->CCR1 = Compare1; -} - -/******************************************************************************* -* Function Name : TIM_SetCompare2 -* Description : Sets the TIMx Capture Compare2 Register value -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - Compare2: specifies the Capture Compare2 register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCompare2(TIM_TypeDef* TIMx, u16 Compare2) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Set the Capture Compare2 Register value */ - TIMx->CCR2 = Compare2; -} - -/******************************************************************************* -* Function Name : TIM_SetCompare3 -* Description : Sets the TIMx Capture Compare3 Register value -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - Compare3: specifies the Capture Compare3 register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCompare3(TIM_TypeDef* TIMx, u16 Compare3) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Set the Capture Compare3 Register value */ - TIMx->CCR3 = Compare3; -} - -/******************************************************************************* -* Function Name : TIM_SetCompare4 -* Description : Sets the TIMx Capture Compare4 Register value -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - Compare4: specifies the Capture Compare4 register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCompare4(TIM_TypeDef* TIMx, u16 Compare4) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Set the Capture Compare4 Register value */ - TIMx->CCR4 = Compare4; -} - -/******************************************************************************* -* Function Name : TIM_SetIC1Prescaler -* Description : Sets the TIMx Input Capture 1 prescaler. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPSC: specifies the Input Capture1 prescaler -* new value. -* This parameter can be one of the following values: -* - TIM_ICPSC_DIV1: no prescaler -* - TIM_ICPSC_DIV2: capture is done once every 2 events -* - TIM_ICPSC_DIV4: capture is done once every 4 events -* - TIM_ICPSC_DIV8: capture is done once every 8 events -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC1PSC Bits */ - TIMx->CCMR1 &= CCMR_IC13PSC_Mask; - - /* Set the IC1PSC value */ - TIMx->CCMR1 |= TIM_ICPSC; -} - -/******************************************************************************* -* Function Name : TIM_SetIC2Prescaler -* Description : Sets the TIMx Input Capture 2 prescaler. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPSC: specifies the Input Capture2 prescaler -* new value. -* This parameter can be one of the following values: -* - TIM_ICPSC_DIV1: no prescaler -* - TIM_ICPSC_DIV2: capture is done once every 2 events -* - TIM_ICPSC_DIV4: capture is done once every 4 events -* - TIM_ICPSC_DIV8: capture is done once every 8 events -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC2PSC Bits */ - TIMx->CCMR1 &= CCMR_IC24PSC_Mask; - - /* Set the IC2PSC value */ - TIMx->CCMR1 |= (u16)(TIM_ICPSC << 8); -} - -/******************************************************************************* -* Function Name : TIM_SetIC3Prescaler -* Description : Sets the TIMx Input Capture 3 prescaler. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPSC: specifies the Input Capture3 prescaler -* new value. -* This parameter can be one of the following values: -* - TIM_ICPSC_DIV1: no prescaler -* - TIM_ICPSC_DIV2: capture is done once every 2 events -* - TIM_ICPSC_DIV4: capture is done once every 4 events -* - TIM_ICPSC_DIV8: capture is done once every 8 events -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC3PSC Bits */ - TIMx->CCMR2 &= CCMR_IC13PSC_Mask; - - /* Set the IC3PSC value */ - TIMx->CCMR2 |= TIM_ICPSC; -} - -/******************************************************************************* -* Function Name : TIM_SetIC4Prescaler -* Description : Sets the TIMx Input Capture 4 prescaler. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPSC: specifies the Input Capture4 prescaler -* new value. -* This parameter can be one of the following values: -* - TIM_ICPSC_DIV1: no prescaler -* - TIM_ICPSC_DIV2: capture is done once every 2 events -* - TIM_ICPSC_DIV4: capture is done once every 4 events -* - TIM_ICPSC_DIV8: capture is done once every 8 events -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC4PSC Bits */ - TIMx->CCMR2 &= CCMR_IC24PSC_Mask; - - /* Set the IC4PSC value */ - TIMx->CCMR2 |= (u16)(TIM_ICPSC << 8); -} - -/******************************************************************************* -* Function Name : TIM_SetClockDivision -* Description : Sets the TIMx Clock Division value. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_CKD: specifies the clock division value. -* This parameter can be one of the following value: -* - TIM_CKD_DIV1: TDTS = Tck_tim -* - TIM_CKD_DIV2: TDTS = 2*Tck_tim -* - TIM_CKD_DIV4: TDTS = 4*Tck_tim -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetClockDivision(TIM_TypeDef* TIMx, u16 TIM_CKD) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CKD_DIV(TIM_CKD)); - - /* Reset the CKD Bits */ - TIMx->CR1 &= CR1_CKD_Mask; - - /* Set the CKD value */ - TIMx->CR1 |= TIM_CKD; -} -/******************************************************************************* -* Function Name : TIM_GetCapture1 -* Description : Gets the TIMx Input Capture 1 value. -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : Capture Compare 1 Register value. -*******************************************************************************/ -u16 TIM_GetCapture1(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Get the Capture 1 Register value */ - return TIMx->CCR1; -} - -/******************************************************************************* -* Function Name : TIM_GetCapture2 -* Description : Gets the TIMx Input Capture 2 value. -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : Capture Compare 2 Register value. -*******************************************************************************/ -u16 TIM_GetCapture2(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Get the Capture 2 Register value */ - return TIMx->CCR2; -} - -/******************************************************************************* -* Function Name : TIM_GetCapture3 -* Description : Gets the TIMx Input Capture 3 value. -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : Capture Compare 3 Register value. -*******************************************************************************/ -u16 TIM_GetCapture3(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Get the Capture 3 Register value */ - return TIMx->CCR3; -} - -/******************************************************************************* -* Function Name : TIM_GetCapture4 -* Description : Gets the TIMx Input Capture 4 value. -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : Capture Compare 4 Register value. -*******************************************************************************/ -u16 TIM_GetCapture4(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Get the Capture 4 Register value */ - return TIMx->CCR4; -} - -/******************************************************************************* -* Function Name : TIM_GetCounter -* Description : Gets the TIMx Counter value. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* Output : None -* Return : Counter Register value. -*******************************************************************************/ -u16 TIM_GetCounter(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Get the Counter Register value */ - return TIMx->CNT; -} - -/******************************************************************************* -* Function Name : TIM_GetPrescaler -* Description : Gets the TIMx Prescaler value. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* Output : None -* Return : Prescaler Register value. -*******************************************************************************/ -u16 TIM_GetPrescaler(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Get the Prescaler Register value */ - return TIMx->PSC; -} - -/******************************************************************************* -* Function Name : TIM_GetFlagStatus -* Description : Checks whether the specified TIM flag is set or not. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - TIM_FLAG_Update: TIM update Flag -* - TIM_FLAG_CC1: TIM Capture Compare 1 Flag -* - TIM_FLAG_CC2: TIM Capture Compare 2 Flag -* - TIM_FLAG_CC3: TIM Capture Compare 3 Flag -* - TIM_FLAG_CC4: TIM Capture Compare 4 Flag -* - TIM_FLAG_COM: TIM Commutation Flag -* - TIM_FLAG_Trigger: TIM Trigger Flag -* - TIM_FLAG_Break: TIM Break Flag -* - TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag -* - TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag -* - TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag -* - TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag -* Output : None -* Return : The new state of TIM_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, u16 TIM_FLAG) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); - assert_param(IS_TIM_PERIPH_FLAG(TIMx, TIM_FLAG)); - - if ((TIMx->SR & TIM_FLAG) != (u16)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : TIM_ClearFlag -* Description : Clears the TIMx's pending flags. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_FLAG: specifies the flag bit to clear. -* This parameter can be any combination of the following values: -* - TIM_FLAG_Update: TIM update Flag -* - TIM_FLAG_CC1: TIM Capture Compare 1 Flag -* - TIM_FLAG_CC2: TIM Capture Compare 2 Flag -* - TIM_FLAG_CC3: TIM Capture Compare 3 Flag -* - TIM_FLAG_CC4: TIM Capture Compare 4 Flag -* - TIM_FLAG_COM: TIM Commutation Flag -* - TIM_FLAG_Trigger: TIM Trigger Flag -* - TIM_FLAG_Break: TIM Break Flag -* - TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag -* - TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag -* - TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag -* - TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearFlag(TIM_TypeDef* TIMx, u16 TIM_FLAG) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_CLEAR_FLAG(TIMx, TIM_FLAG)); - assert_param(IS_TIM_PERIPH_FLAG(TIMx, TIM_FLAG)); - - /* Clear the flags */ - TIMx->SR = (u16)~TIM_FLAG; -} - -/******************************************************************************* -* Function Name : TIM_GetITStatus -* Description : Checks whether the TIM interrupt has occurred or not. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_IT: specifies the TIM interrupt source to check. -* This parameter can be one of the following values: -* - TIM_IT_Update: TIM update Interrupt source -* - TIM_IT_CC1: TIM Capture Compare 1 Interrupt source -* - TIM_IT_CC2: TIM Capture Compare 2 Interrupt source -* - TIM_IT_CC3: TIM Capture Compare 3 Interrupt source -* - TIM_IT_CC4: TIM Capture Compare 4 Interrupt source -* - TIM_IT_COM: TIM Commutation Interrupt -* source -* - TIM_IT_Trigger: TIM Trigger Interrupt source -* - TIM_IT_Break: TIM Break Interrupt source -* Output : None -* Return : The new state of the TIM_IT(SET or RESET). -*******************************************************************************/ -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, u16 TIM_IT) -{ - ITStatus bitstatus = RESET; - u16 itstatus = 0x0, itenable = 0x0; - - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_IT(TIM_IT)); - assert_param(IS_TIM_PERIPH_IT(TIMx, TIM_IT)); - - itstatus = TIMx->SR & TIM_IT; - - itenable = TIMx->DIER & TIM_IT; - - if ((itstatus != (u16)RESET) && (itenable != (u16)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : TIM_ClearITPendingBit -* Description : Clears the TIMx's interrupt pending bits. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_IT: specifies the pending bit to clear. -* This parameter can be any combination of the following values: -* - TIM_IT_Update: TIM1 update Interrupt source -* - TIM_IT_CC1: TIM Capture Compare 1 Interrupt source -* - TIM_IT_CC2: TIM Capture Compare 2 Interrupt source -* - TIM_IT_CC3: TIM Capture Compare 3 Interrupt source -* - TIM_IT_CC4: TIM Capture Compare 4 Interrupt source -* - TIM_IT_COM: TIM Commutation Interrupt -* source -* - TIM_IT_Trigger: TIM Trigger Interrupt source -* - TIM_IT_Break: TIM Break Interrupt source -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, u16 TIM_IT) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_PERIPH_IT(TIMx, TIM_IT)); - - /* Clear the IT pending Bit */ - TIMx->SR = (u16)~TIM_IT; -} - -/******************************************************************************* -* Function Name : TI1_Config -* Description : Configure the TI1 as Input. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPolarity : The Input Polarity. -* This parameter can be one of the following values: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - TIM_ICSelection: specifies the input to be used. -* This parameter can be one of the following values: -* - TIM_ICSelection_DirectTI: TIM Input 1 is selected to -* be connected to IC1. -* - TIM_ICSelection_IndirectTI: TIM Input 1 is selected to -* be connected to IC2. -* - TIM_ICSelection_TRC: TIM Input 1 is selected to be -* connected to TRC. -* - TIM_ICFilter: Specifies the Input Capture Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -static void TI1_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter) -{ - u16 tmpccmr1 = 0, tmpccer = 0; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= CCER_CC1E_Reset; - - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input and set the filter */ - tmpccmr1 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask; - tmpccmr1 |= TIM_ICSelection | (u16)(TIM_ICFilter << 4); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= CCER_CC1P_Reset; - tmpccer |= TIM_ICPolarity | CCER_CC1E_Set; - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TI2_Config -* Description : Configure the TI2 as Input. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPolarity : The Input Polarity. -* This parameter can be one of the following values: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - TIM_ICSelection: specifies the input to be used. -* This parameter can be one of the following values: -* - TIM_ICSelection_DirectTI: TIM Input 2 is selected to -* be connected to IC2. -* - TIM_ICSelection_IndirectTI: TIM Input 2 is selected to -* be connected to IC1. -* - TIM_ICSelection_TRC: TIM Input 2 is selected to be -* connected to TRC. -* - TIM_ICFilter: Specifies the Input Capture Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -static void TI2_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter) -{ - u16 tmpccmr1 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= CCER_CC2E_Reset; - - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - tmp = (u16)(TIM_ICPolarity << 4); - - /* Select the Input and set the filter */ - tmpccmr1 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask; - tmpccmr1 |= (u16)(TIM_ICFilter << 12); - tmpccmr1 |= (u16)(TIM_ICSelection << 8); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= CCER_CC2P_Reset; - tmpccer |= tmp | CCER_CC2E_Set; - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TI3_Config -* Description : Configure the TI3 as Input. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPolarity : The Input Polarity. -* This parameter can be one of the following values: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - TIM_ICSelection: specifies the input to be used. -* This parameter can be one of the following values: -* - TIM_ICSelection_DirectTI: TIM Input 3 is selected to -* be connected to IC3. -* - TIM_ICSelection_IndirectTI: TIM Input 3 is selected to -* be connected to IC4. -* - TIM_ICSelection_TRC: TIM Input 3 is selected to be -* connected to TRC. -* - TIM_ICFilter: Specifies the Input Capture Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -static void TI3_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter) -{ - u16 tmpccmr2 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= CCER_CC3E_Reset; - - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (u16)(TIM_ICPolarity << 8); - - /* Select the Input and set the filter */ - tmpccmr2 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask; - tmpccmr2 |= TIM_ICSelection | (u16)(TIM_ICFilter << 4); - - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= CCER_CC3P_Reset; - tmpccer |= tmp | CCER_CC3E_Set; - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TI4_Config -* Description : Configure the TI1 as Input. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPolarity : The Input Polarity. -* This parameter can be one of the following values: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - TIM_ICSelection: specifies the input to be used. -* This parameter can be one of the following values: -* - TIM_ICSelection_DirectTI: TIM Input 4 is selected to -* be connected to IC4. -* - TIM_ICSelection_IndirectTI: TIM Input 4 is selected to -* be connected to IC3. -* - TIM_ICSelection_TRC: TIM Input 4 is selected to be -* connected to TRC. -* - TIM_ICFilter: Specifies the Input Capture Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -static void TI4_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter) -{ - u16 tmpccmr2 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= CCER_CC4E_Reset; - - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (u16)(TIM_ICPolarity << 12); - - /* Select the Input and set the filter */ - tmpccmr2 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask; - tmpccmr2 |= (u16)(TIM_ICSelection << 8) | (u16)(TIM_ICFilter << 12); - - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= CCER_CC4P_Reset; - tmpccer |= tmp | CCER_CC4E_Set; - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer ; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_usart.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_usart.c deleted file mode 100755 index 261462b..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_usart.c +++ /dev/null @@ -1,989 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_usart.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the USART firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_usart.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* USART UE Mask */ -#define CR1_UE_Set ((u16)0x2000) /* USART Enable Mask */ -#define CR1_UE_Reset ((u16)0xDFFF) /* USART Disable Mask */ - -/* USART WakeUp Method */ -#define CR1_WAKE_Mask ((u16)0xF7FF) /* USART WakeUp Method Mask */ - -/* USART RWU Mask */ -#define CR1_RWU_Set ((u16)0x0002) /* USART mute mode Enable Mask */ -#define CR1_RWU_Reset ((u16)0xFFFD) /* USART mute mode Enable Mask */ - -#define CR1_SBK_Set ((u16)0x0001) /* USART Break Character send Mask */ - -#define CR1_CLEAR_Mask ((u16)0xE9F3) /* USART CR1 Mask */ - -#define CR2_Address_Mask ((u16)0xFFF0) /* USART address Mask */ - -/* USART LIN Mask */ -#define CR2_LINEN_Set ((u16)0x4000) /* USART LIN Enable Mask */ -#define CR2_LINEN_Reset ((u16)0xBFFF) /* USART LIN Disable Mask */ - -/* USART LIN Break detection */ -#define CR2_LBDL_Mask ((u16)0xFFDF) /* USART LIN Break detection Mask */ - -#define CR2_STOP_CLEAR_Mask ((u16)0xCFFF) /* USART CR2 STOP Bits Mask */ -#define CR2_CLOCK_CLEAR_Mask ((u16)0xF0FF) /* USART CR2 Clock Mask */ - -/* USART SC Mask */ -#define CR3_SCEN_Set ((u16)0x0020) /* USART SC Enable Mask */ -#define CR3_SCEN_Reset ((u16)0xFFDF) /* USART SC Disable Mask */ - -/* USART SC NACK Mask */ -#define CR3_NACK_Set ((u16)0x0010) /* USART SC NACK Enable Mask */ -#define CR3_NACK_Reset ((u16)0xFFEF) /* USART SC NACK Disable Mask */ - -/* USART Half-Duplex Mask */ -#define CR3_HDSEL_Set ((u16)0x0008) /* USART Half-Duplex Enable Mask */ -#define CR3_HDSEL_Reset ((u16)0xFFF7) /* USART Half-Duplex Disable Mask */ - -/* USART IrDA Mask */ -#define CR3_IRLP_Mask ((u16)0xFFFB) /* USART IrDA LowPower mode Mask */ - -#define CR3_CLEAR_Mask ((u16)0xFCFF) /* USART CR3 Mask */ - -/* USART IrDA Mask */ -#define CR3_IREN_Set ((u16)0x0002) /* USART IrDA Enable Mask */ -#define CR3_IREN_Reset ((u16)0xFFFD) /* USART IrDA Disable Mask */ - -#define GTPR_LSB_Mask ((u16)0x00FF) /* Guard Time Register LSB Mask */ -#define GTPR_MSB_Mask ((u16)0xFF00) /* Guard Time Register MSB Mask */ - -#define IT_Mask ((u16)0x001F) /* USART Interrupt Mask */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : USART_DeInit -* Description : Deinitializes the USARTx peripheral registers to their -* default reset values. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* Output : None -* Return : None -*******************************************************************************/ -void USART_DeInit(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - switch (*(u32*)&USARTx) - { - case USART1_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); - break; - - case USART2_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); - break; - - case USART3_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); - break; - - case UART4_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); - break; - - case UART5_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : USART_Init -* Description : Initializes the USARTx peripheral according to the specified -* parameters in the USART_InitStruct . -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_InitStruct: pointer to a USART_InitTypeDef structure -* that contains the configuration information for the -* specified USART peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) -{ - u32 tmpreg = 0x00, apbclock = 0x00; - u32 integerdivider = 0x00; - u32 fractionaldivider = 0x00; - u32 usartxbase = 0; - RCC_ClocksTypeDef RCC_ClocksStatus; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); - assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); - assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); - assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); - assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); - assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); - /* The hardware flow control is available only for USART1, USART2 and USART3 */ - assert_param(IS_USART_PERIPH_HFC(USARTx, USART_InitStruct->USART_HardwareFlowControl)); - - usartxbase = (*(u32*)&USARTx); - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - /* Clear STOP[13:12] bits */ - tmpreg &= CR2_STOP_CLEAR_Mask; - - /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ - /* Set STOP[13:12] bits according to USART_StopBits value */ - tmpreg |= (u32)USART_InitStruct->USART_StopBits; - - /* Write to USART CR2 */ - USARTx->CR2 = (u16)tmpreg; - -/*---------------------------- USART CR1 Configuration -----------------------*/ - tmpreg = USARTx->CR1; - /* Clear M, PCE, PS, TE and RE bits */ - tmpreg &= CR1_CLEAR_Mask; - - /* Configure the USART Word Length, Parity and mode ----------------------- */ - /* Set the M bits according to USART_WordLength value */ - /* Set PCE and PS bits according to USART_Parity value */ - /* Set TE and RE bits according to USART_Mode value */ - tmpreg |= (u32)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | - USART_InitStruct->USART_Mode; - - /* Write to USART CR1 */ - USARTx->CR1 = (u16)tmpreg; - -/*---------------------------- USART CR3 Configuration -----------------------*/ - tmpreg = USARTx->CR3; - /* Clear CTSE and RTSE bits */ - tmpreg &= CR3_CLEAR_Mask; - - /* Configure the USART HFC -------------------------------------------------*/ - /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ - tmpreg |= USART_InitStruct->USART_HardwareFlowControl; - - /* Write to USART CR3 */ - USARTx->CR3 = (u16)tmpreg; - -/*---------------------------- USART BRR Configuration -----------------------*/ - /* Configure the USART Baud Rate -------------------------------------------*/ - RCC_GetClocksFreq(&RCC_ClocksStatus); - if (usartxbase == USART1_BASE) - { - apbclock = RCC_ClocksStatus.PCLK2_Frequency; - } - else - { - apbclock = RCC_ClocksStatus.PCLK1_Frequency; - } - - /* Determine the integer part */ - integerdivider = ((0x19 * apbclock) / (0x04 * (USART_InitStruct->USART_BaudRate))); - tmpreg = (integerdivider / 0x64) << 0x04; - - /* Determine the fractional part */ - fractionaldivider = integerdivider - (0x64 * (tmpreg >> 0x04)); - tmpreg |= ((((fractionaldivider * 0x10) + 0x32) / 0x64)) & ((u8)0x0F); - - /* Write to USART BRR */ - USARTx->BRR = (u16)tmpreg; -} - -/******************************************************************************* -* Function Name : USART_StructInit -* Description : Fills each USART_InitStruct member with its default value. -* Input : - USART_InitStruct: pointer to a USART_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void USART_StructInit(USART_InitTypeDef* USART_InitStruct) -{ - /* USART_InitStruct members default value */ - USART_InitStruct->USART_BaudRate = 9600; - USART_InitStruct->USART_WordLength = USART_WordLength_8b; - USART_InitStruct->USART_StopBits = USART_StopBits_1; - USART_InitStruct->USART_Parity = USART_Parity_No ; - USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; -} - -/******************************************************************************* -* Function Name : USART_ClockInit -* Description : Initializes the USARTx peripheral Clock according to the -* specified parameters in the USART_ClockInitStruct . -* Input : - USARTx: where x can be 1, 2, 3 to select the USART peripheral. -* Note: The Smart Card mode is not available for UART4 and UART5. -* - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef -* structure that contains the configuration information for -* the specified USART peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - u32 tmpreg = 0x00; - - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); - assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); - assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); - assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - /* Clear CLKEN, CPOL, CPHA and LBCL bits */ - tmpreg &= CR2_CLOCK_CLEAR_Mask; - - /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ - /* Set CLKEN bit according to USART_Clock value */ - /* Set CPOL bit according to USART_CPOL value */ - /* Set CPHA bit according to USART_CPHA value */ - /* Set LBCL bit according to USART_LastBit value */ - tmpreg |= (u32)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | - USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; - - /* Write to USART CR2 */ - USARTx->CR2 = (u16)tmpreg; -} - -/******************************************************************************* -* Function Name : USART_ClockStructInit -* Description : Fills each USART_ClockInitStruct member with its default value. -* Input : - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - /* USART_ClockInitStruct members default value */ - USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; - USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; - USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; - USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; -} - -/******************************************************************************* -* Function Name : USART_Cmd -* Description : Enables or disables the specified USART peripheral. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* : - NewState: new state of the USARTx peripheral. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected USART by setting the UE bit in the CR1 register */ - USARTx->CR1 |= CR1_UE_Set; - } - else - { - /* Disable the selected USART by clearing the UE bit in the CR1 register */ - USARTx->CR1 &= CR1_UE_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_ITConfig -* Description : Enables or disables the specified USART interrupts. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_IT: specifies the USART interrupt sources to be -* enabled or disabled. -* This parameter can be one of the following values: -* - USART_IT_CTS: CTS change interrupt (not available for -* UART4 and UART5) -* - USART_IT_LBD: LIN Break detection interrupt -* - USART_IT_TXE: Tansmit Data Register empty interrupt -* - USART_IT_TC: Transmission complete interrupt -* - USART_IT_RXNE: Receive Data register not empty -* interrupt -* - USART_IT_IDLE: Idle line detection interrupt -* - USART_IT_PE: Parity Error interrupt -* - USART_IT_ERR: Error interrupt(Frame error, noise -* error, overrun error) -* - NewState: new state of the specified USARTx interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ITConfig(USART_TypeDef* USARTx, u16 USART_IT, FunctionalState NewState) -{ - u32 usartreg = 0x00, itpos = 0x00, itmask = 0x00; - u32 usartxbase = 0x00; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CONFIG_IT(USART_IT)); - assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - usartxbase = (*(u32*)&(USARTx)); - - /* Get the USART register index */ - usartreg = (((u8)USART_IT) >> 0x05); - - /* Get the interrupt position */ - itpos = USART_IT & IT_Mask; - - itmask = (((u32)0x01) << itpos); - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - usartxbase += 0x0C; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - usartxbase += 0x10; - } - else /* The IT is in CR3 register */ - { - usartxbase += 0x14; - } - if (NewState != DISABLE) - { - *(vu32*)usartxbase |= itmask; - } - else - { - *(vu32*)usartxbase &= ~itmask; - } -} - -/******************************************************************************* -* Function Name : USART_DMACmd -* Description : Enables or disables the USART’s DMA interface. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3 or UART4. -* Note: The DMA mode is not available for UART5. -* - USART_DMAReq: specifies the DMA request. -* This parameter can be any combination of the following values: -* - USART_DMAReq_Tx: USART DMA transmit request -* - USART_DMAReq_Rx: USART DMA receive request -* - NewState: new state of the DMA Request sources. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_DMACmd(USART_TypeDef* USARTx, u16 USART_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_1234_PERIPH(USARTx)); - assert_param(IS_USART_DMAREQ(USART_DMAReq)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the DMA transfer for selected requests by setting the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 |= USART_DMAReq; - } - else - { - /* Disable the DMA transfer for selected requests by clearing the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 &= (u16)~USART_DMAReq; - } -} - -/******************************************************************************* -* Function Name : USART_SetAddress -* Description : Sets the address of the USART node. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_Address: Indicates the address of the USART node. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SetAddress(USART_TypeDef* USARTx, u8 USART_Address) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_ADDRESS(USART_Address)); - - /* Clear the USART address */ - USARTx->CR2 &= CR2_Address_Mask; - /* Set the USART address node */ - USARTx->CR2 |= USART_Address; -} - -/******************************************************************************* -* Function Name : USART_WakeUpConfig -* Description : Selects the USART WakeUp method. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_WakeUp: specifies the USART wakeup method. -* This parameter can be one of the following values: -* - USART_WakeUp_IdleLine: WakeUp by an idle line detection -* - USART_WakeUp_AddressMark: WakeUp by an address mark -* Output : None -* Return : None -*******************************************************************************/ -void USART_WakeUpConfig(USART_TypeDef* USARTx, u16 USART_WakeUp) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_WAKEUP(USART_WakeUp)); - - USARTx->CR1 &= CR1_WAKE_Mask; - USARTx->CR1 |= USART_WakeUp; -} - -/******************************************************************************* -* Function Name : USART_ReceiverWakeUpCmd -* Description : Determines if the USART is in mute mode or not. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - NewState: new state of the USART mute mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ - USARTx->CR1 |= CR1_RWU_Set; - } - else - { - /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ - USARTx->CR1 &= CR1_RWU_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_LINBreakDetectLengthConfig -* Description : Sets the USART LIN Break detection length. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_LINBreakDetectLength: specifies the LIN break -* detection length. -* This parameter can be one of the following values: -* - USART_LINBreakDetectLength_10b: 10-bit break detection -* - USART_LINBreakDetectLength_11b: 11-bit break detection -* Output : None -* Return : None -*******************************************************************************/ -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, u16 USART_LINBreakDetectLength) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); - - USARTx->CR2 &= CR2_LBDL_Mask; - USARTx->CR2 |= USART_LINBreakDetectLength; -} - -/******************************************************************************* -* Function Name : USART_LINCmd -* Description : Enables or disables the USART’s LIN mode. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - NewState: new state of the USART LIN mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ - USARTx->CR2 |= CR2_LINEN_Set; - } - else - { - /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ - USARTx->CR2 &= CR2_LINEN_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_SendData -* Description : Transmits single data through the USARTx peripheral. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - Data: the data to transmit. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SendData(USART_TypeDef* USARTx, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_DATA(Data)); - - /* Transmit Data */ - USARTx->DR = (Data & (u16)0x01FF); -} - -/******************************************************************************* -* Function Name : USART_ReceiveData -* Description : Returns the most recent received data by the USARTx peripheral. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* Output : None -* Return : The received data. -*******************************************************************************/ -u16 USART_ReceiveData(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Receive Data */ - return (u16)(USARTx->DR & (u16)0x01FF); -} - -/******************************************************************************* -* Function Name : USART_SendBreak -* Description : Transmits break characters. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SendBreak(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Send break characters */ - USARTx->CR1 |= CR1_SBK_Set; -} - -/******************************************************************************* -* Function Name : USART_SetGuardTime -* Description : Sets the specified USART guard time. -* Input : - USARTx: where x can be 1, 2 or 3 to select the USART -* peripheral. -* Note: The guard time bits are not available for UART4 and UART5. -* - USART_GuardTime: specifies the guard time. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SetGuardTime(USART_TypeDef* USARTx, u8 USART_GuardTime) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - - /* Clear the USART Guard time */ - USARTx->GTPR &= GTPR_LSB_Mask; - /* Set the USART guard time */ - USARTx->GTPR |= (u16)((u16)USART_GuardTime << 0x08); -} - -/******************************************************************************* -* Function Name : USART_SetPrescaler -* Description : Sets the system clock prescaler. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* Note: The function is used for IrDA mode with UART4 and UART5. -* - USART_Prescaler: specifies the prescaler clock. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SetPrescaler(USART_TypeDef* USARTx, u8 USART_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Clear the USART prescaler */ - USARTx->GTPR &= GTPR_MSB_Mask; - /* Set the USART prescaler */ - USARTx->GTPR |= USART_Prescaler; -} - -/******************************************************************************* -* Function Name : USART_SmartCardCmd -* Description : Enables or disables the USART’s Smart Card mode. -* Input : - USARTx: where x can be 1, 2 or 3 to select the USART -* peripheral. -* Note: The Smart Card mode is not available for UART4 and UART5. -* - NewState: new state of the Smart Card mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the SC mode by setting the SCEN bit in the CR3 register */ - USARTx->CR3 |= CR3_SCEN_Set; - } - else - { - /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ - USARTx->CR3 &= CR3_SCEN_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_SmartCardNACKCmd -* Description : Enables or disables NACK transmission. -* Input : - USARTx: where x can be 1, 2 or 3 to select the USART -* peripheral. -* Note: The Smart Card mode is not available for UART4 and UART5. -* - NewState: new state of the NACK transmission. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ - USARTx->CR3 |= CR3_NACK_Set; - } - else - { - /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ - USARTx->CR3 &= CR3_NACK_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_HalfDuplexCmd -* Description : Enables or disables the USART’s Half Duplex communication. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - NewState: new state of the USART Communication. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ - USARTx->CR3 |= CR3_HDSEL_Set; - } - else - { - /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ - USARTx->CR3 &= CR3_HDSEL_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_IrDAConfig -* Description : Configures the USART’s IrDA interface. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_IrDAMode: specifies the IrDA mode. -* This parameter can be one of the following values: -* - USART_IrDAMode_LowPower -* - USART_IrDAMode_Normal -* Output : None -* Return : None -*******************************************************************************/ -void USART_IrDAConfig(USART_TypeDef* USARTx, u16 USART_IrDAMode) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); - - USARTx->CR3 &= CR3_IRLP_Mask; - USARTx->CR3 |= USART_IrDAMode; -} - -/******************************************************************************* -* Function Name : USART_IrDACmd -* Description : Enables or disables the USART’s IrDA interface. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - NewState: new state of the IrDA mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ - USARTx->CR3 |= CR3_IREN_Set; - } - else - { - /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ - USARTx->CR3 &= CR3_IREN_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_GetFlagStatus -* Description : Checks whether the specified USART flag is set or not. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - USART_FLAG_CTS: CTS Change flag (not available for -* UART4 and UART5) -* - USART_FLAG_LBD: LIN Break detection flag -* - USART_FLAG_TXE: Transmit data register empty flag -* - USART_FLAG_TC: Transmission Complete flag -* - USART_FLAG_RXNE: Receive data register not empty flag -* - USART_FLAG_IDLE: Idle Line detection flag -* - USART_FLAG_ORE: OverRun Error flag -* - USART_FLAG_NE: Noise Error flag -* - USART_FLAG_FE: Framing Error flag -* - USART_FLAG_PE: Parity Error flag -* Output : None -* Return : The new state of USART_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, u16 USART_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_FLAG(USART_FLAG)); - assert_param(IS_USART_PERIPH_FLAG(USARTx, USART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */ - - if ((USARTx->SR & USART_FLAG) != (u16)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : USART_ClearFlag -* Description : Clears the USARTx's pending flags. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_FLAG: specifies the flag to clear. -* This parameter can be any combination of the following values: -* - USART_FLAG_CTS: CTS Change flag (not available for -* UART4 and UART5). -* - USART_FLAG_LBD: LIN Break detection flag. -* - USART_FLAG_TC: Transmission Complete flag. -* - USART_FLAG_RXNE: Receive data register not empty flag. -* - USART_FLAG_IDLE: Idle Line detection flag. -* - USART_FLAG_ORE: OverRun Error flag. -* - USART_FLAG_NE: Noise Error flag. -* - USART_FLAG_FE: Framing Error flag. -* - USART_FLAG_PE: Parity Error flag. -* -* Note: - For IDLE, ORE, NE, FE and PE flags user has to read -* the USART DR register after calling this function. -* - TXE flag can't be cleared by this function, it's -* cleared only by a write to the USART DR register. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ClearFlag(USART_TypeDef* USARTx, u16 USART_FLAG) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); - assert_param(IS_USART_PERIPH_FLAG(USARTx, USART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */ - - USARTx->SR = (u16)~USART_FLAG; -} - -/******************************************************************************* -* Function Name : USART_GetITStatus -* Description : Checks whether the specified USART interrupt has occurred or not. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_IT: specifies the USART interrupt source to check. -* This parameter can be one of the following values: -* - USART_IT_CTS: CTS change interrupt (not available for -* UART4 and UART5) -* - USART_IT_LBD: LIN Break detection interrupt -* - USART_IT_TXE: Tansmit Data Register empty interrupt -* - USART_IT_TC: Transmission complete interrupt -* - USART_IT_RXNE: Receive Data register not empty -* interrupt -* - USART_IT_IDLE: Idle line detection interrupt -* - USART_IT_ORE: OverRun Error interrupt -* - USART_IT_NE: Noise Error interrupt -* - USART_IT_FE: Framing Error interrupt -* - USART_IT_PE: Parity Error interrupt -* Output : None -* Return : The new state of USART_IT (SET or RESET). -*******************************************************************************/ -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, u16 USART_IT) -{ - u32 bitpos = 0x00, itmask = 0x00, usartreg = 0x00; - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_IT(USART_IT)); - assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */ - - /* Get the USART register index */ - usartreg = (((u8)USART_IT) >> 0x05); - - /* Get the interrupt position */ - itmask = USART_IT & IT_Mask; - - itmask = (u32)0x01 << itmask; - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - itmask &= USARTx->CR1; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - itmask &= USARTx->CR2; - } - else /* The IT is in CR3 register */ - { - itmask &= USARTx->CR3; - } - - bitpos = USART_IT >> 0x08; - - bitpos = (u32)0x01 << bitpos; - bitpos &= USARTx->SR; - - if ((itmask != (u16)RESET)&&(bitpos != (u16)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - return bitstatus; -} - -/******************************************************************************* -* Function Name : USART_ClearITPendingBit -* Description : Clears the USARTx’s interrupt pending bits. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_IT: specifies the interrupt pending bit to clear. -* This parameter can be one of the following values: -* - USART_IT_CTS: CTS change interrupt (not available for -* UART4 and UART5) -* - USART_IT_LBD: LIN Break detection interrupt -* - USART_IT_TC: Transmission complete interrupt. -* - USART_IT_RXNE: Receive Data register not empty interrupt. -* - USART_IT_IDLE: Idle line detection interrupt. -* - USART_IT_ORE: OverRun Error interrupt. -* - USART_IT_NE: Noise Error interrupt. -* - USART_IT_FE: Framing Error interrupt. -* - USART_IT_PE: Parity Error interrupt. -* -* Note: - For IDLE, ORE, NE, FE and PE pending bits user has to -* read the USART DR register after calling this function. -* - TXE pending bit can't be cleared by this function, it's -* cleared only by a write to the USART DR register. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ClearITPendingBit(USART_TypeDef* USARTx, u16 USART_IT) -{ - u16 bitpos = 0x00, itmask = 0x00; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_IT(USART_IT)); - assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */ - - bitpos = USART_IT >> 0x08; - - itmask = (u16)((u16)0x01 << bitpos); - USARTx->SR = (u16)~itmask; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_vector.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_vector.c deleted file mode 100755 index 92932c1..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_vector.c +++ /dev/null @@ -1,217 +0,0 @@ -/******************** (C) COPYRIGHT 2007 STMicroelectronics ******************** -* File Name : stm32f10x_vector.c -* Author : MCD Application Team -* Version : V1.0 -* Date : 10/08/2007 -* Description : This file contains the vector table for STM32F10x. -* After Reset the Cortex-M3 processor is in Thread mode, -* priority is Privileged, and the Stack is set to Main. -******************************************************************************** -* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMAChannel1_IRQHandler(void); -void DMAChannel2_IRQHandler(void); -void DMAChannel3_IRQHandler(void); -void DMAChannel4_IRQHandler(void); -void DMAChannel5_IRQHandler(void); -void DMAChannel6_IRQHandler(void); -void DMAChannel7_IRQHandler(void); -void ADC_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); - - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -extern unsigned long _etext; -extern unsigned long _sidata; /* start address for the initialization values - of the .data section. defined in linker script */ -extern unsigned long _sdata; /* start address for the .data section. defined - in linker script */ -extern unsigned long _edata; /* end address for the .data section. defined in - linker script */ - -extern unsigned long _sbss; /* start address for the .bss section. defined - in linker script */ -extern unsigned long _ebss; /* end address for the .bss section. defined in - linker script */ - -extern void _estack; /* init value for the stack pointer. defined in linker script */ - - - -/* Private typedef -----------------------------------------------------------*/ -/* function prototypes -------------------------------------------------------*/ -void Reset_Handler(void) __attribute__((__interrupt__)); -extern int main(void); - - -/******************************************************************************* -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -*******************************************************************************/ - - -__attribute__ ((section(".isr_vector"))) -void (* const g_pfnVectors[])(void) = -{ - &_estack, // The initial stack pointer - Reset_Handler, // The reset handler - NMIException, - HardFaultException, - MemManageException, - BusFaultException, - UsageFaultException, - 0, 0, 0, 0, /* Reserved */ - SVCHandler, - DebugMonitor, - 0, /* Reserved */ - PendSVC, - SysTickHandler, - WWDG_IRQHandler, - PVD_IRQHandler, - TAMPER_IRQHandler, - RTC_IRQHandler, - FLASH_IRQHandler, - RCC_IRQHandler, - EXTI0_IRQHandler, - EXTI1_IRQHandler, - EXTI2_IRQHandler, - EXTI3_IRQHandler, - EXTI4_IRQHandler, - DMAChannel1_IRQHandler, - DMAChannel2_IRQHandler, - DMAChannel3_IRQHandler, - DMAChannel4_IRQHandler, - DMAChannel5_IRQHandler, - DMAChannel6_IRQHandler, - DMAChannel7_IRQHandler, - ADC_IRQHandler, - USB_HP_CAN_TX_IRQHandler, - USB_LP_CAN_RX0_IRQHandler, - CAN_RX1_IRQHandler, - CAN_SCE_IRQHandler, - EXTI9_5_IRQHandler, - TIM1_BRK_IRQHandler, - TIM1_UP_IRQHandler, - TIM1_TRG_COM_IRQHandler, - TIM1_CC_IRQHandler, - TIM2_IRQHandler, - TIM3_IRQHandler, - TIM4_IRQHandler, - I2C1_EV_IRQHandler, - I2C1_ER_IRQHandler, - I2C2_EV_IRQHandler, - I2C2_ER_IRQHandler, - SPI1_IRQHandler, - SPI2_IRQHandler, - USART1_IRQHandler, - USART2_IRQHandler, - USART3_IRQHandler, - EXTI15_10_IRQHandler, - RTCAlarm_IRQHandler, - USBWakeUp_IRQHandler, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - (unsigned short)0xF108F85F //this is a workaround for boot in RAM mode. -}; - -/******************************************************************************* -* Function Name : Reset_Handler -* Description : This is the code that gets called when the processor first -* starts execution following a reset event. Only the absolutely -* necessary set is performed, after which the application -* supplied main() routine is called. -* Input : -* Output : -* Return : -*******************************************************************************/ -void Reset_Handler(void) -{ - unsigned long *pulSrc, *pulDest; - - // - // Copy the data segment initializers from flash to SRAM. - // - pulSrc = &_sidata; - for(pulDest = &_sdata; pulDest < &_edata; ) - { - *(pulDest++) = *(pulSrc++); - } - - // - // Zero fill the bss segment. - // - for(pulDest = &_sbss; pulDest < &_ebss; ) - { - *(pulDest++) = 0; - } - - // - // Call the application's entry point. - // - main(); -} - - -/****************** (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/ - - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_wwdg.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_wwdg.c deleted file mode 100755 index 176300e..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/src/stm32f10x_wwdg.c +++ /dev/null @@ -1,190 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_wwdg.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file provides all the WWDG firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_wwdg.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ----------- WWDG registers bit address in the alias region ----------- */ -#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE) - -/* Alias word address of EWI bit */ -#define CFR_OFFSET (WWDG_OFFSET + 0x04) -#define EWI_BitNumber 0x09 -#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4)) - -/* Alias word address of EWIF bit */ -#define SR_OFFSET (WWDG_OFFSET + 0x08) -#define EWIF_BitNumber 0x00 -#define SR_EWIF_BB (PERIPH_BB_BASE + (SR_OFFSET * 32) + (EWIF_BitNumber * 4)) - -/* --------------------- WWDG registers bit mask ------------------------ */ -/* CR register bit mask */ -#define CR_WDGA_Set ((u32)0x00000080) - -/* CFR register bit mask */ -#define CFR_WDGTB_Mask ((u32)0xFFFFFE7F) -#define CFR_W_Mask ((u32)0xFFFFFF80) - -#define BIT_Mask ((u8)0x7F) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : WWDG_DeInit -* Description : Deinitializes the WWDG peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_DeInit(void) -{ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); -} - -/******************************************************************************* -* Function Name : WWDG_SetPrescaler -* Description : Sets the WWDG Prescaler. -* Input : - WWDG_Prescaler: specifies the WWDG Prescaler. -* This parameter can be one of the following values: -* - WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1 -* - WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2 -* - WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4 -* - WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8 -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_SetPrescaler(u32 WWDG_Prescaler) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler)); - - /* Clear WDGTB[1:0] bits */ - tmpreg = WWDG->CFR & CFR_WDGTB_Mask; - - /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */ - tmpreg |= WWDG_Prescaler; - - /* Store the new value */ - WWDG->CFR = tmpreg; -} - -/******************************************************************************* -* Function Name : WWDG_SetWindowValue -* Description : Sets the WWDG window value. -* Input : - WindowValue: specifies the window value to be compared to -* the downcounter. -* This parameter value must be lower than 0x80. -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_SetWindowValue(u8 WindowValue) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_WWDG_WINDOW_VALUE(WindowValue)); - - /* Clear W[6:0] bits */ - tmpreg = WWDG->CFR & CFR_W_Mask; - - /* Set W[6:0] bits according to WindowValue value */ - tmpreg |= WindowValue & BIT_Mask; - - /* Store the new value */ - WWDG->CFR = tmpreg; -} - -/******************************************************************************* -* Function Name : WWDG_EnableIT -* Description : Enables the WWDG Early Wakeup interrupt(EWI). -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_EnableIT(void) -{ - *(vu32 *) CFR_EWI_BB = (u32)ENABLE; -} - -/******************************************************************************* -* Function Name : WWDG_SetCounter -* Description : Sets the WWDG counter value. -* Input : - Counter: specifies the watchdog counter value. -* This parameter must be a number between 0x40 and 0x7F. -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_SetCounter(u8 Counter) -{ - /* Check the parameters */ - assert_param(IS_WWDG_COUNTER(Counter)); - - /* Write to T[6:0] bits to configure the counter value, no need to do - a read-modify-write; writing a 0 to WDGA bit does nothing */ - WWDG->CR = Counter & BIT_Mask; -} - -/******************************************************************************* -* Function Name : WWDG_Enable -* Description : Enables WWDG and load the counter value. -* - Counter: specifies the watchdog counter value. -* This parameter must be a number between 0x40 and 0x7F. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_Enable(u8 Counter) -{ - /* Check the parameters */ - assert_param(IS_WWDG_COUNTER(Counter)); - - WWDG->CR = CR_WDGA_Set | Counter; -} - -/******************************************************************************* -* Function Name : WWDG_GetFlagStatus -* Description : Checks whether the Early Wakeup interrupt flag is set or not. -* Input : None -* Output : None -* Return : The new state of the Early Wakeup interrupt flag (SET or RESET) -*******************************************************************************/ -FlagStatus WWDG_GetFlagStatus(void) -{ - return (FlagStatus)(*(vu32 *) SR_EWIF_BB); -} - -/******************************************************************************* -* Function Name : WWDG_ClearFlag -* Description : Clears Early Wakeup interrupt flag. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_ClearFlag(void) -{ - WWDG->SR = (u32)RESET; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/version-ld.txt b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/version-ld.txt deleted file mode 100755 index 4a68bef..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/version-ld.txt +++ /dev/null @@ -1 +0,0 @@ -Linker scripts taken from RAISONANCE RKitARM for RIDE7 1.03.0004. diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/version-lib.txt b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/version-lib.txt deleted file mode 100755 index cb8ecc9..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/lib/version-lib.txt +++ /dev/null @@ -1,105 +0,0 @@ -/******************** (C) COPYRIGHT 2007 STMicroelectronics ******************** -* File Name : version.txt -* Author : MCD Application Team -* Version : V1.0 -* Date : 10/08/2007 -* Description : Version file for STM32F10x Firmware Library. -******************************************************************************** -* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -* V1.0 - 10/08/2007 -==================== - + Add template project with RIDE toolchain - - + In all stm32f10x_ppp.c and stm32f10x_conf.h files: change "assert" macro name - to "assert_param" - Note: If you are using the FW Library V0.3 in your application and you want to - migrate to V1.0, you have to update your application’s “stm32f10x_conf.h” - file with the latest one (provided with V1.0). - - + stm32f10x_conf.h - - Remove '#undef assert' - - Change '#define DEBUG' by '#define DEBUG 1' - - + stm32f10x_type.h - - Add new types: sc32, sc16, sc8, vsc32, vsc16 and vsc8 - - + stm32f10x_it.c - - Add basic fault exception handling: in "HardFaultException", "MemManageException", - "BusFaultException" and "UsageFaultException" ISR the following code was added: - /* Go to infinite loop when exception occurs */ - while (1) - { - } - - + stm32f10x_rcc.c - - "RCC_WaitForHSEStartUp()" function updated to resolve issue with high GNU - compiler optimization - - + stm32f10x_gpio.h - - '#define GPIO_Remap1_CAN            ((u32)0x001D2000)' changed to - '#define GPIO_Remap1_CAN            ((u32)0x001D4000)' - - + stm32f10x_rtc.c/.h - - "RTC_GetPrescaler" function removed - - + stm32f10x_bkp.c/.h - - add "BKP_RTCOutputConfig()" function to allow to select the RTC output - source(Calib clock, RTC Alarm or RTC Second) to output on Tamper pin and - remove "BKP_RTCCalibrationClockOutputCmd()" function - - + stm32f10x_can.h - - CAN synchronization jump width defines updated - - '#define CAN_SJW_0tq'   ==> '#define CAN_SJW_1tq'  - - '#define CAN_SJW_1tq'   ==> '#define CAN_SJW_2tq'  - - '#define CAN_SJW_2tq'   ==> '#define CAN_SJW_3tq'  - - '#define CAN_SJW_3tq'   ==> '#define CAN_SJW_4tq'  - - + stm32f10x_tim1.c/.h - - "TIM1_OCxNPolarityConfig(u16 TIM1_OCPolarity)" function: change parameter - name to 'TIM1_OCNPolarity' - - change 'TIM1_ICSelection_TRGI' by 'TIM1_ICSelection_TRC' - - + stm32f10x_tim.c/.h - - change 'TIM_ICSelection_TRGI' by 'TIM_ICSelection_TRC' - - + examples - - ADC examples 3 & 4 updated - - DEBUG example - - Example modified to support RIDE specific printf function implementation - - I2C example5 - - i2c_ee.c: add the following function prototypes: "void GPIO_Configuration(void)" - add "void I2C_Configuration(void)" - - Add GPIO pin toggle example - - BKP, CAN, DMA, NVIC and I2C examples readme files updated - - Use decimal (instead of hexadecimal) values constants in TIM, TIM1 and - IWDG examples - - USART - - example 12 - - USART3 ISR updated - - Timeout define "SC_Receive_Timeout" updated to 0x4000 - - example 7 - - Example modified to support RIDE specific printf function implementation - - RTC example - - Example modified to support RIDE specific printf function implementation - - Change "BKP_RTCCalibrationClockOutputCmd()" function by "RTC_ClockOutput()" - - LSI removed as RTC clock source - - IWDG example - - LSI frequency value changed from 32 KHz to 40 KHz - - Update the STM32F10x evaluation board name from STM32F10x-EVAL to STM3210B-EVAL - - -* V0.3 - 05/21/2007 -==================== - Created. - - -******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****** - - diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main deleted file mode 100755 index 81098cb..0000000 Binary files a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main and /dev/null differ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.bin b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.bin deleted file mode 100755 index e69de29..0000000 diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.c deleted file mode 100755 index 8502183..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.c +++ /dev/null @@ -1,204 +0,0 @@ -/******************** (C) COPYRIGHT 2007 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V1.0 -* Date : 10/08/2007 -* Description : Main program body -******************************************************************************** -* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -GPIO_InitTypeDef GPIO_InitStructure; -ErrorStatus HSEStartUpStatus; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void NVIC_Configuration(void); -void Delay(vu32 nCount); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* Configure the system clocks */ - RCC_Configuration(); - - /* NVIC Configuration */ - NVIC_Configuration(); - - /* Enable GPIOC clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE); - - /* Configure PC.12 as Output push-pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOC, &GPIO_InitStructure); - - /* Bit Banged PWM Handler Vars*/ - int thresh = 128; - int count = 0; - vu32 fadeRateCount = 0; - const vu32 fadeRate = 0xFFFF; - - while (1) - { - /* Main Pwm Handling for a given thresh */ - if (count < thresh) - { - GPIO_SetBits(GPIOC,GPIO_Pin_12); - } else - { - GPIO_ResetBits(GPIOC,GPIO_Pin_12); - } - - count++; - - if (count == 255) - { - fadeRateCount++; - - if (fadeRateCount == fadeRate) - { - thresh += 5; - fadeRateCount = 0; - } - } - - /* Insert delay */ - Delay(0xAFFFF); - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } -} - -/******************************************************************************* -* Function Name : NVIC_Configuration -* Description : Configures Vector Table base location. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Configuration(void) -{ -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif -} - -/******************************************************************************* -* Function Name : Delay -* Description : Inserts a delay time. -* Input : nCount: specifies the delay time length. -* Output : None -* Return : None -*******************************************************************************/ -void Delay(vu32 nCount) -{ - for(; nCount != 0; nCount--); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.elf b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.elf deleted file mode 100755 index b9de87a..0000000 Binary files a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.elf and /dev/null differ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.elf.map b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.elf.map deleted file mode 100755 index 689b327..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.elf.map +++ /dev/null @@ -1,675 +0,0 @@ -Archive member included because of file (symbol) - -lib/libstm32.a(stm32f10x_flash.o) - main.o (FLASH_SetLatency) -lib/libstm32.a(stm32f10x_gpio.o) - main.o (GPIO_Init) -lib/libstm32.a(stm32f10x_nvic.o) - main.o (NVIC_SetVectorTable) -lib/libstm32.a(stm32f10x_rcc.o) - main.o (RCC_DeInit) - -Allocating common symbols -Common symbol size file - -HSEStartUpStatus 0x1 main.o -GPIO_InitStructure 0x4 main.o - -Discarded input sections - - .text 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .data 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .bss 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .init 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .fini 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .text 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .data 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .bss 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .init_array 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .fini_array 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .eh_frame 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .jcr 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .text 0x00000000 0x0 main.o - .data 0x00000000 0x0 main.o - .bss 0x00000000 0x0 main.o - COMMON 0x00000000 0x0 main.o - .text 0x00000000 0x0 stm32f10x_it.o - .data 0x00000000 0x0 stm32f10x_it.o - .bss 0x00000000 0x0 stm32f10x_it.o - .text 0x00000000 0x0 lib/libstm32.a(stm32f10x_flash.o) - .data 0x00000000 0x0 lib/libstm32.a(stm32f10x_flash.o) - .bss 0x00000000 0x0 lib/libstm32.a(stm32f10x_flash.o) - .text 0x00000000 0x0 lib/libstm32.a(stm32f10x_gpio.o) - .data 0x00000000 0x0 lib/libstm32.a(stm32f10x_gpio.o) - .bss 0x00000000 0x0 lib/libstm32.a(stm32f10x_gpio.o) - .text 0x00000000 0x0 lib/libstm32.a(stm32f10x_nvic.o) - .data 0x00000000 0x0 lib/libstm32.a(stm32f10x_nvic.o) - .bss 0x00000000 0x0 lib/libstm32.a(stm32f10x_nvic.o) - .text 0x00000000 0x0 lib/libstm32.a(stm32f10x_rcc.o) - .data 0x00000000 0x0 lib/libstm32.a(stm32f10x_rcc.o) - .bss 0x00000000 0x0 lib/libstm32.a(stm32f10x_rcc.o) - .rodata 0x00000000 0x0 lib/libstm32.a(stm32f10x_rcc.o) - .text 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .data 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .bss 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .eh_frame 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .jcr 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .text 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - .data 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - .bss 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - .init 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - .fini 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - -Memory Configuration - -Name Origin Length Attributes -RAM 0x20000000 0x00005000 xrw -FLASH 0x08000000 0x00020000 xr -FLASHB1 0x00000000 0x00000000 xr -EXTMEMB0 0x00000000 0x00000000 xr -EXTMEMB1 0x00000000 0x00000000 xr -EXTMEMB2 0x00000000 0x00000000 xr -EXTMEMB3 0x00000000 0x00000000 xr -*default* 0x00000000 0xffffffff - -Linker script and memory map - -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -LOAD main.o -LOAD stm32f10x_it.o -LOAD lib/libstm32.a -START GROUP -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3\libgcc.a -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/../../../../arm-none-eabi/lib\libc.a -END GROUP -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - 0x00000400 __Stack_Size = 0x400 - 0x00000400 PROVIDE (_Stack_Size, __Stack_Size) - 0x20004c00 __Stack_Init = (_estack - __Stack_Size) - 0x20004c00 PROVIDE (_Stack_Init, __Stack_Init) - 0x00000100 _Minimum_Stack_Size = 0x100 - 0x00000000 PROVIDE (Undefined_Handler, 0x0) - 0x00000000 PROVIDE (SWI_Handler, 0x0) - 0x00000000 PROVIDE (IRQ_Handler, 0x0) - 0x00000000 PROVIDE (Prefetch_Handler, 0x0) - 0x00000000 PROVIDE (Abort_Handler, 0x0) - 0x00000000 PROVIDE (FIQ_Handler, 0x0) - 0x00000000 PROVIDE (NMIException, 0x0) - 0x00000000 PROVIDE (HardFaultException, 0x0) - 0x00000000 PROVIDE (MemManageException, 0x0) - 0x00000000 PROVIDE (BusFaultException, 0x0) - 0x00000000 PROVIDE (UsageFaultException, 0x0) - 0x00000000 PROVIDE (SVCHandler, 0x0) - 0x00000000 PROVIDE (DebugMonitor, 0x0) - 0x00000000 PROVIDE (PendSVC, 0x0) - 0x00000000 PROVIDE (SysTickHandler, 0x0) - 0x00000000 PROVIDE (WWDG_IRQHandler, 0x0) - 0x00000000 PROVIDE (PVD_IRQHandler, 0x0) - 0x00000000 PROVIDE (TAMPER_IRQHandler, 0x0) - 0x00000000 PROVIDE (RTC_IRQHandler, 0x0) - 0x00000000 PROVIDE (FLASH_IRQHandler, 0x0) - 0x00000000 PROVIDE (RCC_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI0_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI1_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI2_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI3_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI4_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel1_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel2_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel3_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel4_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel5_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel6_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel7_IRQHandler, 0x0) - 0x00000000 PROVIDE (ADC_IRQHandler, 0x0) - 0x00000000 PROVIDE (USB_HP_CAN_TX_IRQHandler, 0x0) - 0x00000000 PROVIDE (USB_LP_CAN_RX0_IRQHandler, 0x0) - 0x00000000 PROVIDE (CAN_RX1_IRQHandler, 0x0) - 0x00000000 PROVIDE (CAN_SCE_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI9_5_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM1_BRK_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM1_UP_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM1_TRG_COM_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM1_CC_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM2_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM3_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM4_IRQHandler, 0x0) - 0x00000000 PROVIDE (I2C1_EV_IRQHandler, 0x0) - 0x00000000 PROVIDE (I2C1_ER_IRQHandler, 0x0) - 0x00000000 PROVIDE (I2C2_EV_IRQHandler, 0x0) - 0x00000000 PROVIDE (I2C2_ER_IRQHandler, 0x0) - 0x00000000 PROVIDE (SPI1_IRQHandler, 0x0) - 0x00000000 PROVIDE (SPI2_IRQHandler, 0x0) - 0x00000000 PROVIDE (USART1_IRQHandler, 0x0) - 0x00000000 PROVIDE (USART2_IRQHandler, 0x0) - 0x00000000 PROVIDE (USART3_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI15_10_IRQHandler, 0x0) - 0x00000000 PROVIDE (RTCAlarm_IRQHandler, 0x0) - 0x00000000 PROVIDE (USBWakeUp_IRQHandler, 0x0) - 0x42000000 PERIPH_BB_BASE = 0x42000000 - 0x22000000 SRAM_BB_BASE = 0x22000000 - 0x20000000 SRAM_BASE = 0x20000000 - 0x40000000 PERIPH_BASE = 0x40000000 - 0x40022000 PROVIDE (FLASH_BASE, 0x40022000) - 0x1ffff800 PROVIDE (OB_BASE, 0x1ffff800) - 0x40000000 APB1PERIPH_BASE = PERIPH_BASE - 0x40010000 APB2PERIPH_BASE = (PERIPH_BASE + 0x10000) - 0x40020000 AHBPERIPH_BASE = (PERIPH_BASE + 0x20000) - 0x40000000 PROVIDE (TIM2, (APB1PERIPH_BASE + 0x0)) - 0x40000400 PROVIDE (TIM3, (APB1PERIPH_BASE + 0x400)) - 0x40000800 PROVIDE (TIM4, (APB1PERIPH_BASE + 0x800)) - 0x40002800 PROVIDE (RTC, (APB1PERIPH_BASE + 0x2800)) - 0x40002c00 PROVIDE (WWDG, (APB1PERIPH_BASE + 0x2c00)) - 0x40003000 PROVIDE (IWDG, (APB1PERIPH_BASE + 0x3000)) - 0x40003800 PROVIDE (SPI2, (APB1PERIPH_BASE + 0x3800)) - 0x40004400 PROVIDE (USART2, (APB1PERIPH_BASE + 0x4400)) - 0x40004800 PROVIDE (USART3, (APB1PERIPH_BASE + 0x4800)) - 0x40005400 PROVIDE (I2C1, (APB1PERIPH_BASE + 0x5400)) - 0x40005800 PROVIDE (I2C2, (APB1PERIPH_BASE + 0x5800)) - 0x40006400 PROVIDE (CAN, (APB1PERIPH_BASE + 0x6400)) - 0x40006c00 PROVIDE (BKP, (APB1PERIPH_BASE + 0x6c00)) - 0x40007000 PROVIDE (PWR, (APB1PERIPH_BASE + 0x7000)) - 0x40010000 PROVIDE (AFIO, (APB2PERIPH_BASE + 0x0)) - 0x40010400 PROVIDE (EXTI, (APB2PERIPH_BASE + 0x400)) - 0x40010800 PROVIDE (GPIOA, (APB2PERIPH_BASE + 0x800)) - 0x40010c00 PROVIDE (GPIOB, (APB2PERIPH_BASE + 0xc00)) - 0x40011000 PROVIDE (GPIOC, (APB2PERIPH_BASE + 0x1000)) - 0x40011400 PROVIDE (GPIOD, (APB2PERIPH_BASE + 0x1400)) - 0x40011800 PROVIDE (GPIOE, (APB2PERIPH_BASE + 0x1800)) - 0x40012400 PROVIDE (ADC1, (APB2PERIPH_BASE + 0x2400)) - 0x40012800 PROVIDE (ADC2, (APB2PERIPH_BASE + 0x2800)) - 0x40012c00 PROVIDE (TIM1, (APB2PERIPH_BASE + 0x2c00)) - 0x40013000 PROVIDE (SPI1, (APB2PERIPH_BASE + 0x3000)) - 0x40013800 PROVIDE (USART1, (APB2PERIPH_BASE + 0x3800)) - 0x40020000 PROVIDE (DMA, (AHBPERIPH_BASE + 0x0)) - 0x40020008 PROVIDE (DMA_Channel1, (AHBPERIPH_BASE + 0x8)) - 0x4002001c PROVIDE (DMA_Channel2, (AHBPERIPH_BASE + 0x1c)) - 0x40020030 PROVIDE (DMA_Channel3, (AHBPERIPH_BASE + 0x30)) - 0x40020044 PROVIDE (DMA_Channel4, (AHBPERIPH_BASE + 0x44)) - 0x40020058 PROVIDE (DMA_Channel5, (AHBPERIPH_BASE + 0x58)) - 0x4002006c PROVIDE (DMA_Channel6, (AHBPERIPH_BASE + 0x6c)) - 0x40020080 PROVIDE (DMA_Channel7, (AHBPERIPH_BASE + 0x80)) - 0x40021000 PROVIDE (RCC, (AHBPERIPH_BASE + 0x1000)) - 0xe000e000 SCS_BASE = 0xe000e000 - 0xe000e010 PROVIDE (SysTick, (SCS_BASE + 0x10)) - 0xe000e100 PROVIDE (NVIC, (SCS_BASE + 0x100)) - 0xe000ed00 PROVIDE (SCB, (SCS_BASE + 0xd00)) - 0x20005000 _estack = 0x20005000 - -.isr_vector 0x08000000 0x0 - 0x08000000 . = ALIGN (0x4) - *(.isr_vector) - 0x08000000 . = ALIGN (0x4) - -.flashtext 0x08000000 0x0 - 0x08000000 . = ALIGN (0x4) - *(.flashtext) - 0x08000000 . = ALIGN (0x4) - -.text 0x08000000 0x0 - 0x08000000 . = ALIGN (0x4) - *(.text) - *(.text.*) - *(.rodata) - *(.rodata*) - *(.glue_7) - .glue_7 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .glue_7 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .glue_7 0x08000000 0x0 main.o - .glue_7 0x08000000 0x0 stm32f10x_it.o - .glue_7 0x08000000 0x0 lib/libstm32.a(stm32f10x_flash.o) - .glue_7 0x08000000 0x0 lib/libstm32.a(stm32f10x_gpio.o) - .glue_7 0x08000000 0x0 lib/libstm32.a(stm32f10x_nvic.o) - .glue_7 0x08000000 0x0 lib/libstm32.a(stm32f10x_rcc.o) - .glue_7 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .glue_7 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - *(.glue_7t) - .glue_7t 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .glue_7t 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .glue_7t 0x08000000 0x0 main.o - .glue_7t 0x08000000 0x0 stm32f10x_it.o - .glue_7t 0x08000000 0x0 lib/libstm32.a(stm32f10x_flash.o) - .glue_7t 0x08000000 0x0 lib/libstm32.a(stm32f10x_gpio.o) - .glue_7t 0x08000000 0x0 lib/libstm32.a(stm32f10x_nvic.o) - .glue_7t 0x08000000 0x0 lib/libstm32.a(stm32f10x_rcc.o) - .glue_7t 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .glue_7t 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - 0x08000000 . = ALIGN (0x4) - 0x08000000 _etext = . - 0x08000000 _sidata = _etext - -.vfp11_veneer 0x20000000 0x0 - .vfp11_veneer 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .vfp11_veneer 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .vfp11_veneer 0x20000000 0x0 main.o - .vfp11_veneer 0x20000000 0x0 stm32f10x_it.o - .vfp11_veneer 0x20000000 0x0 lib/libstm32.a(stm32f10x_flash.o) - .vfp11_veneer 0x20000000 0x0 lib/libstm32.a(stm32f10x_gpio.o) - .vfp11_veneer 0x20000000 0x0 lib/libstm32.a(stm32f10x_nvic.o) - .vfp11_veneer 0x20000000 0x0 lib/libstm32.a(stm32f10x_rcc.o) - .vfp11_veneer 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .vfp11_veneer 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - -.v4_bx 0x20000000 0x0 - .v4_bx 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .v4_bx 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .v4_bx 0x20000000 0x0 main.o - .v4_bx 0x20000000 0x0 stm32f10x_it.o - .v4_bx 0x20000000 0x0 lib/libstm32.a(stm32f10x_flash.o) - .v4_bx 0x20000000 0x0 lib/libstm32.a(stm32f10x_gpio.o) - .v4_bx 0x20000000 0x0 lib/libstm32.a(stm32f10x_nvic.o) - .v4_bx 0x20000000 0x0 lib/libstm32.a(stm32f10x_rcc.o) - .v4_bx 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .v4_bx 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - -.data 0x20000000 0x0 load address 0x08000000 - 0x20000000 . = ALIGN (0x4) - 0x20000000 _sdata = . - *(.data) - *(.data.*) - 0x20000000 . = ALIGN (0x4) - 0x20000000 _edata = . - -.bss 0x20000000 0x0 - 0x20000000 . = ALIGN (0x4) - 0x20000000 _sbss = . - *(.bss) - *(COMMON) - 0x20000000 . = ALIGN (0x4) - 0x20000000 _ebss = . - 0x20000000 PROVIDE (end, _ebss) - 0x20000000 PROVIDE (_end, _ebss) - -._usrstack 0x20000000 0x100 - 0x20000000 . = ALIGN (0x4) - 0x20000000 _susrstack = . - 0x20000100 . = (. + _Minimum_Stack_Size) - *fill* 0x20000000 0x100 00 - 0x20000100 . = ALIGN (0x4) - 0x20000100 _eusrstack = . - -.b1text - *(.b1text) - *(.b1rodata) - *(.b1rodata*) - -.eb0text - *(.eb0text) - *(.eb0rodata) - *(.eb0rodata*) - -.eb1text - *(.eb1text) - *(.eb1rodata) - *(.eb1rodata*) - -.eb2text - *(.eb2text) - *(.eb2rodata) - *(.eb2rodata*) - -.eb3text - *(.eb3text) - *(.eb3rodata) - *(.eb3rodata*) - 0x20000100 __exidx_start = . - 0x20000100 __exidx_end = . - -/DISCARD/ - libc.a(*) - libm.a(*) - libgcc.a(*) - -.stab - *(.stab) - -.stabstr - *(.stabstr) - -.stab.excl - *(.stab.excl) - -.stab.exclstr - *(.stab.exclstr) - -.stab.index - *(.stab.index) - -.stab.indexstr - *(.stab.indexstr) - -.comment 0x00000000 0x102 - *(.comment) - .comment 0x00000000 0x2b main.o - .comment 0x0000002b 0x2b stm32f10x_it.o - .comment 0x00000056 0x2b lib/libstm32.a(stm32f10x_flash.o) - .comment 0x00000081 0x2b lib/libstm32.a(stm32f10x_gpio.o) - .comment 0x000000ac 0x2b lib/libstm32.a(stm32f10x_nvic.o) - .comment 0x000000d7 0x2b lib/libstm32.a(stm32f10x_rcc.o) - -.debug - *(.debug) - -.line - *(.line) - -.debug_srcinfo - *(.debug_srcinfo) - -.debug_sfnames - *(.debug_sfnames) - -.debug_aranges 0x00000000 0xc0 - *(.debug_aranges) - .debug_aranges - 0x00000000 0x20 main.o - .debug_aranges - 0x00000020 0x20 stm32f10x_it.o - .debug_aranges - 0x00000040 0x20 lib/libstm32.a(stm32f10x_flash.o) - .debug_aranges - 0x00000060 0x20 lib/libstm32.a(stm32f10x_gpio.o) - .debug_aranges - 0x00000080 0x20 lib/libstm32.a(stm32f10x_nvic.o) - .debug_aranges - 0x000000a0 0x20 lib/libstm32.a(stm32f10x_rcc.o) - -.debug_pubnames - 0x00000000 0xeb9 - *(.debug_pubnames) - .debug_pubnames - 0x00000000 0x7e main.o - .debug_pubnames - 0x0000007e 0x63c stm32f10x_it.o - .debug_pubnames - 0x000006ba 0x60 lib/libstm32.a(stm32f10x_flash.o) - .debug_pubnames - 0x0000071a 0x17b lib/libstm32.a(stm32f10x_gpio.o) - .debug_pubnames - 0x00000895 0x360 lib/libstm32.a(stm32f10x_nvic.o) - .debug_pubnames - 0x00000bf5 0x2c4 lib/libstm32.a(stm32f10x_rcc.o) - -.debug_info 0x00000000 0x344e - *(.debug_info .gnu.linkonce.wi.*) - .debug_info 0x00000000 0x45e main.o - .debug_info 0x0000045e 0xac7 stm32f10x_it.o - .debug_info 0x00000f25 0x275 lib/libstm32.a(stm32f10x_flash.o) - .debug_info 0x0000119a 0x918 lib/libstm32.a(stm32f10x_gpio.o) - .debug_info 0x00001ab2 0xd65 lib/libstm32.a(stm32f10x_nvic.o) - .debug_info 0x00002817 0xc37 lib/libstm32.a(stm32f10x_rcc.o) - -.debug_abbrev 0x00000000 0x74a - *(.debug_abbrev) - .debug_abbrev 0x00000000 0x105 main.o - .debug_abbrev 0x00000105 0x52 stm32f10x_it.o - .debug_abbrev 0x00000157 0x93 lib/libstm32.a(stm32f10x_flash.o) - .debug_abbrev 0x000001ea 0x1b4 lib/libstm32.a(stm32f10x_gpio.o) - .debug_abbrev 0x0000039e 0x1f6 lib/libstm32.a(stm32f10x_nvic.o) - .debug_abbrev 0x00000594 0x1b6 lib/libstm32.a(stm32f10x_rcc.o) - -.debug_line 0x00000000 0x6fb - *(.debug_line) - .debug_line 0x00000000 0xab main.o - .debug_line 0x000000ab 0x14f stm32f10x_it.o - .debug_line 0x000001fa 0x88 lib/libstm32.a(stm32f10x_flash.o) - .debug_line 0x00000282 0x14c lib/libstm32.a(stm32f10x_gpio.o) - .debug_line 0x000003ce 0x195 lib/libstm32.a(stm32f10x_nvic.o) - .debug_line 0x00000563 0x198 lib/libstm32.a(stm32f10x_rcc.o) - -.debug_frame 0x00000000 0x1034 - *(.debug_frame) - .debug_frame 0x00000000 0x84 main.o - .debug_frame 0x00000084 0x688 stm32f10x_it.o - .debug_frame 0x0000070c 0x64 lib/libstm32.a(stm32f10x_flash.o) - .debug_frame 0x00000770 0x1f4 lib/libstm32.a(stm32f10x_gpio.o) - .debug_frame 0x00000964 0x348 lib/libstm32.a(stm32f10x_nvic.o) - .debug_frame 0x00000cac 0x388 lib/libstm32.a(stm32f10x_rcc.o) - -.debug_str 0x00000000 0xfb - *(.debug_str) - .debug_str 0x00000000 0x58 lib/libstm32.a(stm32f10x_gpio.o) - .debug_str 0x00000058 0x5b lib/libstm32.a(stm32f10x_nvic.o) - .debug_str 0x000000b3 0x48 lib/libstm32.a(stm32f10x_rcc.o) - -.debug_loc 0x00000000 0x1d51 - *(.debug_loc) - .debug_loc 0x00000000 0xc4 main.o - .debug_loc 0x000000c4 0xb97 stm32f10x_it.o - .debug_loc 0x00000c5b 0xa5 lib/libstm32.a(stm32f10x_flash.o) - .debug_loc 0x00000d00 0x39b lib/libstm32.a(stm32f10x_gpio.o) - .debug_loc 0x0000109b 0x5fa lib/libstm32.a(stm32f10x_nvic.o) - .debug_loc 0x00001695 0x6bc lib/libstm32.a(stm32f10x_rcc.o) - -.debug_macinfo - *(.debug_macinfo) - -.debug_weaknames - *(.debug_weaknames) - -.debug_funcnames - *(.debug_funcnames) - -.debug_typenames - *(.debug_typenames) - -.debug_varnames - *(.debug_varnames) -OUTPUT(main.elf elf32-littlearm) - -.ARM.attributes - 0x00000000 0x31 - .ARM.attributes - 0x00000000 0x14 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .ARM.attributes - 0x00000014 0x2e c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .ARM.attributes - 0x00000042 0x31 main.o - .ARM.attributes - 0x00000073 0x31 stm32f10x_it.o - .ARM.attributes - 0x000000a4 0x31 lib/libstm32.a(stm32f10x_flash.o) - .ARM.attributes - 0x000000d5 0x31 lib/libstm32.a(stm32f10x_gpio.o) - .ARM.attributes - 0x00000106 0x31 lib/libstm32.a(stm32f10x_nvic.o) - .ARM.attributes - 0x00000137 0x31 lib/libstm32.a(stm32f10x_rcc.o) - .ARM.attributes - 0x00000168 0x2c c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .ARM.attributes - 0x00000194 0x14 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - -Cross Reference Table - -Symbol File -ADC1_2_IRQHandler stm32f10x_it.o -ADC3_IRQHandler stm32f10x_it.o -BusFaultException stm32f10x_it.o -CAN_RX1_IRQHandler stm32f10x_it.o -CAN_SCE_IRQHandler stm32f10x_it.o -DMA1_Channel1_IRQHandler stm32f10x_it.o -DMA1_Channel2_IRQHandler stm32f10x_it.o -DMA1_Channel3_IRQHandler stm32f10x_it.o -DMA1_Channel4_IRQHandler stm32f10x_it.o -DMA1_Channel5_IRQHandler stm32f10x_it.o -DMA1_Channel6_IRQHandler stm32f10x_it.o -DMA1_Channel7_IRQHandler stm32f10x_it.o -DMA2_Channel1_IRQHandler stm32f10x_it.o -DMA2_Channel2_IRQHandler stm32f10x_it.o -DMA2_Channel3_IRQHandler stm32f10x_it.o -DMA2_Channel4_5_IRQHandler stm32f10x_it.o -DebugMonitor stm32f10x_it.o -Delay main.o -EXTI0_IRQHandler stm32f10x_it.o -EXTI15_10_IRQHandler stm32f10x_it.o -EXTI1_IRQHandler stm32f10x_it.o -EXTI2_IRQHandler stm32f10x_it.o -EXTI3_IRQHandler stm32f10x_it.o -EXTI4_IRQHandler stm32f10x_it.o -EXTI9_5_IRQHandler stm32f10x_it.o -FLASH_HalfCycleAccessCmd lib/libstm32.a(stm32f10x_flash.o) -FLASH_IRQHandler stm32f10x_it.o -FLASH_PrefetchBufferCmd lib/libstm32.a(stm32f10x_flash.o) - main.o -FLASH_SetLatency lib/libstm32.a(stm32f10x_flash.o) - main.o -FSMC_IRQHandler stm32f10x_it.o -GPIO_AFIODeInit lib/libstm32.a(stm32f10x_gpio.o) -GPIO_DeInit lib/libstm32.a(stm32f10x_gpio.o) -GPIO_EXTILineConfig lib/libstm32.a(stm32f10x_gpio.o) -GPIO_EventOutputCmd lib/libstm32.a(stm32f10x_gpio.o) -GPIO_EventOutputConfig lib/libstm32.a(stm32f10x_gpio.o) -GPIO_Init lib/libstm32.a(stm32f10x_gpio.o) - main.o -GPIO_InitStructure main.o -GPIO_PinLockConfig lib/libstm32.a(stm32f10x_gpio.o) -GPIO_PinRemapConfig lib/libstm32.a(stm32f10x_gpio.o) -GPIO_ReadInputData lib/libstm32.a(stm32f10x_gpio.o) -GPIO_ReadInputDataBit lib/libstm32.a(stm32f10x_gpio.o) -GPIO_ReadOutputData lib/libstm32.a(stm32f10x_gpio.o) -GPIO_ReadOutputDataBit lib/libstm32.a(stm32f10x_gpio.o) -GPIO_ResetBits lib/libstm32.a(stm32f10x_gpio.o) - main.o -GPIO_SetBits lib/libstm32.a(stm32f10x_gpio.o) - main.o -GPIO_StructInit lib/libstm32.a(stm32f10x_gpio.o) -GPIO_Write lib/libstm32.a(stm32f10x_gpio.o) -GPIO_WriteBit lib/libstm32.a(stm32f10x_gpio.o) -HSEStartUpStatus main.o -HardFaultException stm32f10x_it.o -I2C1_ER_IRQHandler stm32f10x_it.o -I2C1_EV_IRQHandler stm32f10x_it.o -I2C2_ER_IRQHandler stm32f10x_it.o -I2C2_EV_IRQHandler stm32f10x_it.o -MemManageException stm32f10x_it.o -NMIException stm32f10x_it.o -NVIC_BASEPRICONFIG lib/libstm32.a(stm32f10x_nvic.o) -NVIC_ClearIRQChannelPendingBit lib/libstm32.a(stm32f10x_nvic.o) -NVIC_ClearSystemHandlerPendingBit lib/libstm32.a(stm32f10x_nvic.o) -NVIC_Configuration main.o -NVIC_DeInit lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GenerateCoreReset lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GenerateSystemReset lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetBASEPRI lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetCPUID lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetCurrentActiveHandler lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetCurrentPendingIRQChannel lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetFaultAddress lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetFaultHandlerSources lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetIRQChannelActiveBitStatus lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetIRQChannelPendingBitStatus lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetSystemHandlerActiveBitStatus lib/libstm32.a(stm32f10x_nvic.o) -NVIC_GetSystemHandlerPendingBitStatus lib/libstm32.a(stm32f10x_nvic.o) -NVIC_Init lib/libstm32.a(stm32f10x_nvic.o) -NVIC_PriorityGroupConfig lib/libstm32.a(stm32f10x_nvic.o) -NVIC_RESETFAULTMASK lib/libstm32.a(stm32f10x_nvic.o) -NVIC_RESETPRIMASK lib/libstm32.a(stm32f10x_nvic.o) -NVIC_SCBDeInit lib/libstm32.a(stm32f10x_nvic.o) -NVIC_SETFAULTMASK lib/libstm32.a(stm32f10x_nvic.o) -NVIC_SETPRIMASK lib/libstm32.a(stm32f10x_nvic.o) -NVIC_SetIRQChannelPendingBit lib/libstm32.a(stm32f10x_nvic.o) -NVIC_SetSystemHandlerPendingBit lib/libstm32.a(stm32f10x_nvic.o) -NVIC_SetVectorTable lib/libstm32.a(stm32f10x_nvic.o) - main.o -NVIC_StructInit lib/libstm32.a(stm32f10x_nvic.o) -NVIC_SystemHandlerConfig lib/libstm32.a(stm32f10x_nvic.o) -NVIC_SystemHandlerPriorityConfig lib/libstm32.a(stm32f10x_nvic.o) -NVIC_SystemLPConfig lib/libstm32.a(stm32f10x_nvic.o) -PVD_IRQHandler stm32f10x_it.o -PendSVC stm32f10x_it.o -RCC_ADCCLKConfig lib/libstm32.a(stm32f10x_rcc.o) -RCC_AHBPeriphClockCmd lib/libstm32.a(stm32f10x_rcc.o) -RCC_APB1PeriphClockCmd lib/libstm32.a(stm32f10x_rcc.o) -RCC_APB1PeriphResetCmd lib/libstm32.a(stm32f10x_rcc.o) -RCC_APB2PeriphClockCmd lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_APB2PeriphResetCmd lib/libstm32.a(stm32f10x_rcc.o) - lib/libstm32.a(stm32f10x_gpio.o) -RCC_AdjustHSICalibrationValue lib/libstm32.a(stm32f10x_rcc.o) -RCC_BackupResetCmd lib/libstm32.a(stm32f10x_rcc.o) -RCC_ClearFlag lib/libstm32.a(stm32f10x_rcc.o) -RCC_ClearITPendingBit lib/libstm32.a(stm32f10x_rcc.o) -RCC_ClockSecuritySystemCmd lib/libstm32.a(stm32f10x_rcc.o) -RCC_Configuration main.o -RCC_DeInit lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_GetClocksFreq lib/libstm32.a(stm32f10x_rcc.o) -RCC_GetFlagStatus lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_GetITStatus lib/libstm32.a(stm32f10x_rcc.o) -RCC_GetSYSCLKSource lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_HCLKConfig lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_HSEConfig lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_HSICmd lib/libstm32.a(stm32f10x_rcc.o) -RCC_IRQHandler stm32f10x_it.o -RCC_ITConfig lib/libstm32.a(stm32f10x_rcc.o) -RCC_LSEConfig lib/libstm32.a(stm32f10x_rcc.o) -RCC_LSICmd lib/libstm32.a(stm32f10x_rcc.o) -RCC_MCOConfig lib/libstm32.a(stm32f10x_rcc.o) -RCC_PCLK1Config lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_PCLK2Config lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_PLLCmd lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_PLLConfig lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_RTCCLKCmd lib/libstm32.a(stm32f10x_rcc.o) -RCC_RTCCLKConfig lib/libstm32.a(stm32f10x_rcc.o) -RCC_SYSCLKConfig lib/libstm32.a(stm32f10x_rcc.o) - main.o -RCC_USBCLKConfig lib/libstm32.a(stm32f10x_rcc.o) -RCC_WaitForHSEStartUp lib/libstm32.a(stm32f10x_rcc.o) - main.o -RTCAlarm_IRQHandler stm32f10x_it.o -RTC_IRQHandler stm32f10x_it.o -SDIO_IRQHandler stm32f10x_it.o -SPI1_IRQHandler stm32f10x_it.o -SPI2_IRQHandler stm32f10x_it.o -SPI3_IRQHandler stm32f10x_it.o -SVCHandler stm32f10x_it.o -SysTickHandler stm32f10x_it.o -TAMPER_IRQHandler stm32f10x_it.o -TIM1_BRK_IRQHandler stm32f10x_it.o -TIM1_CC_IRQHandler stm32f10x_it.o -TIM1_TRG_COM_IRQHandler stm32f10x_it.o -TIM1_UP_IRQHandler stm32f10x_it.o -TIM2_IRQHandler stm32f10x_it.o -TIM3_IRQHandler stm32f10x_it.o -TIM4_IRQHandler stm32f10x_it.o -TIM5_IRQHandler stm32f10x_it.o -TIM6_IRQHandler stm32f10x_it.o -TIM7_IRQHandler stm32f10x_it.o -TIM8_BRK_IRQHandler stm32f10x_it.o -TIM8_CC_IRQHandler stm32f10x_it.o -TIM8_TRG_COM_IRQHandler stm32f10x_it.o -TIM8_UP_IRQHandler stm32f10x_it.o -UART4_IRQHandler stm32f10x_it.o -UART5_IRQHandler stm32f10x_it.o -USART1_IRQHandler stm32f10x_it.o -USART2_IRQHandler stm32f10x_it.o -USART3_IRQHandler stm32f10x_it.o -USBWakeUp_IRQHandler stm32f10x_it.o -USB_HP_CAN_TX_IRQHandler stm32f10x_it.o -USB_LP_CAN_RX0_IRQHandler stm32f10x_it.o -UsageFaultException stm32f10x_it.o -WWDG_IRQHandler stm32f10x_it.o -_Jv_RegisterClasses c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -__BASEPRICONFIG lib/libstm32.a(stm32f10x_nvic.o) -__GetBASEPRI lib/libstm32.a(stm32f10x_nvic.o) -__RESETFAULTMASK lib/libstm32.a(stm32f10x_nvic.o) -__RESETPRIMASK lib/libstm32.a(stm32f10x_nvic.o) -__SETFAULTMASK lib/libstm32.a(stm32f10x_nvic.o) -__SETPRIMASK lib/libstm32.a(stm32f10x_nvic.o) -__deregister_frame_info c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -__dso_handle c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -__register_frame_info c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -_fini c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o -_init c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o -main main.o diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.map b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.map deleted file mode 100755 index 4b73523..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/main.map +++ /dev/null @@ -1,406 +0,0 @@ - -Allocating common symbols -Common symbol size file - -HSEStartUpStatus 0x1 main.o -GPIO_InitStructure 0x4 main.o - -Discarded input sections - - .text 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .data 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .bss 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .init 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .fini 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .text 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .data 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .bss 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .init_array 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .fini_array 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .eh_frame 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .jcr 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .text 0x00000000 0x0 main.o - .data 0x00000000 0x0 main.o - .bss 0x00000000 0x0 main.o - COMMON 0x00000000 0x0 main.o - .text 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .data 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .bss 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .eh_frame 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .jcr 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .text 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - .data 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - .bss 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - .init 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - .fini 0x00000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - -Memory Configuration - -Name Origin Length Attributes -RAM 0x20000000 0x00005000 xrw -FLASH 0x08000000 0x00020000 xr -FLASHB1 0x00000000 0x00000000 xr -EXTMEMB0 0x00000000 0x00000000 xr -EXTMEMB1 0x00000000 0x00000000 xr -EXTMEMB2 0x00000000 0x00000000 xr -EXTMEMB3 0x00000000 0x00000000 xr -*default* 0x00000000 0xffffffff - -Linker script and memory map - -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -LOAD main.o -START GROUP -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3\libgcc.a -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/../../../../arm-none-eabi/lib\libc.a -END GROUP -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o -LOAD c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - 0x00000400 __Stack_Size = 0x400 - 0x00000400 PROVIDE (_Stack_Size, __Stack_Size) - 0x20004c00 __Stack_Init = (_estack - __Stack_Size) - 0x20004c00 PROVIDE (_Stack_Init, __Stack_Init) - 0x00000100 _Minimum_Stack_Size = 0x100 - 0x00000000 PROVIDE (Undefined_Handler, 0x0) - 0x00000000 PROVIDE (SWI_Handler, 0x0) - 0x00000000 PROVIDE (IRQ_Handler, 0x0) - 0x00000000 PROVIDE (Prefetch_Handler, 0x0) - 0x00000000 PROVIDE (Abort_Handler, 0x0) - 0x00000000 PROVIDE (FIQ_Handler, 0x0) - 0x00000000 PROVIDE (NMIException, 0x0) - 0x00000000 PROVIDE (HardFaultException, 0x0) - 0x00000000 PROVIDE (MemManageException, 0x0) - 0x00000000 PROVIDE (BusFaultException, 0x0) - 0x00000000 PROVIDE (UsageFaultException, 0x0) - 0x00000000 PROVIDE (SVCHandler, 0x0) - 0x00000000 PROVIDE (DebugMonitor, 0x0) - 0x00000000 PROVIDE (PendSVC, 0x0) - 0x00000000 PROVIDE (SysTickHandler, 0x0) - 0x00000000 PROVIDE (WWDG_IRQHandler, 0x0) - 0x00000000 PROVIDE (PVD_IRQHandler, 0x0) - 0x00000000 PROVIDE (TAMPER_IRQHandler, 0x0) - 0x00000000 PROVIDE (RTC_IRQHandler, 0x0) - 0x00000000 PROVIDE (FLASH_IRQHandler, 0x0) - 0x00000000 PROVIDE (RCC_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI0_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI1_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI2_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI3_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI4_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel1_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel2_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel3_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel4_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel5_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel6_IRQHandler, 0x0) - 0x00000000 PROVIDE (DMAChannel7_IRQHandler, 0x0) - 0x00000000 PROVIDE (ADC_IRQHandler, 0x0) - 0x00000000 PROVIDE (USB_HP_CAN_TX_IRQHandler, 0x0) - 0x00000000 PROVIDE (USB_LP_CAN_RX0_IRQHandler, 0x0) - 0x00000000 PROVIDE (CAN_RX1_IRQHandler, 0x0) - 0x00000000 PROVIDE (CAN_SCE_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI9_5_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM1_BRK_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM1_UP_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM1_TRG_COM_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM1_CC_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM2_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM3_IRQHandler, 0x0) - 0x00000000 PROVIDE (TIM4_IRQHandler, 0x0) - 0x00000000 PROVIDE (I2C1_EV_IRQHandler, 0x0) - 0x00000000 PROVIDE (I2C1_ER_IRQHandler, 0x0) - 0x00000000 PROVIDE (I2C2_EV_IRQHandler, 0x0) - 0x00000000 PROVIDE (I2C2_ER_IRQHandler, 0x0) - 0x00000000 PROVIDE (SPI1_IRQHandler, 0x0) - 0x00000000 PROVIDE (SPI2_IRQHandler, 0x0) - 0x00000000 PROVIDE (USART1_IRQHandler, 0x0) - 0x00000000 PROVIDE (USART2_IRQHandler, 0x0) - 0x00000000 PROVIDE (USART3_IRQHandler, 0x0) - 0x00000000 PROVIDE (EXTI15_10_IRQHandler, 0x0) - 0x00000000 PROVIDE (RTCAlarm_IRQHandler, 0x0) - 0x00000000 PROVIDE (USBWakeUp_IRQHandler, 0x0) - 0x42000000 PERIPH_BB_BASE = 0x42000000 - 0x22000000 SRAM_BB_BASE = 0x22000000 - 0x20000000 SRAM_BASE = 0x20000000 - 0x40000000 PERIPH_BASE = 0x40000000 - 0x40022000 PROVIDE (FLASH_BASE, 0x40022000) - 0x1ffff800 PROVIDE (OB_BASE, 0x1ffff800) - 0x40000000 APB1PERIPH_BASE = PERIPH_BASE - 0x40010000 APB2PERIPH_BASE = (PERIPH_BASE + 0x10000) - 0x40020000 AHBPERIPH_BASE = (PERIPH_BASE + 0x20000) - 0x40000000 PROVIDE (TIM2, (APB1PERIPH_BASE + 0x0)) - 0x40000400 PROVIDE (TIM3, (APB1PERIPH_BASE + 0x400)) - 0x40000800 PROVIDE (TIM4, (APB1PERIPH_BASE + 0x800)) - 0x40002800 PROVIDE (RTC, (APB1PERIPH_BASE + 0x2800)) - 0x40002c00 PROVIDE (WWDG, (APB1PERIPH_BASE + 0x2c00)) - 0x40003000 PROVIDE (IWDG, (APB1PERIPH_BASE + 0x3000)) - 0x40003800 PROVIDE (SPI2, (APB1PERIPH_BASE + 0x3800)) - 0x40004400 PROVIDE (USART2, (APB1PERIPH_BASE + 0x4400)) - 0x40004800 PROVIDE (USART3, (APB1PERIPH_BASE + 0x4800)) - 0x40005400 PROVIDE (I2C1, (APB1PERIPH_BASE + 0x5400)) - 0x40005800 PROVIDE (I2C2, (APB1PERIPH_BASE + 0x5800)) - 0x40006400 PROVIDE (CAN, (APB1PERIPH_BASE + 0x6400)) - 0x40006c00 PROVIDE (BKP, (APB1PERIPH_BASE + 0x6c00)) - 0x40007000 PROVIDE (PWR, (APB1PERIPH_BASE + 0x7000)) - 0x40010000 PROVIDE (AFIO, (APB2PERIPH_BASE + 0x0)) - 0x40010400 PROVIDE (EXTI, (APB2PERIPH_BASE + 0x400)) - 0x40010800 PROVIDE (GPIOA, (APB2PERIPH_BASE + 0x800)) - 0x40010c00 PROVIDE (GPIOB, (APB2PERIPH_BASE + 0xc00)) - 0x40011000 PROVIDE (GPIOC, (APB2PERIPH_BASE + 0x1000)) - 0x40011400 PROVIDE (GPIOD, (APB2PERIPH_BASE + 0x1400)) - 0x40011800 PROVIDE (GPIOE, (APB2PERIPH_BASE + 0x1800)) - 0x40012400 PROVIDE (ADC1, (APB2PERIPH_BASE + 0x2400)) - 0x40012800 PROVIDE (ADC2, (APB2PERIPH_BASE + 0x2800)) - 0x40012c00 PROVIDE (TIM1, (APB2PERIPH_BASE + 0x2c00)) - 0x40013000 PROVIDE (SPI1, (APB2PERIPH_BASE + 0x3000)) - 0x40013800 PROVIDE (USART1, (APB2PERIPH_BASE + 0x3800)) - 0x40020000 PROVIDE (DMA, (AHBPERIPH_BASE + 0x0)) - 0x40020008 PROVIDE (DMA_Channel1, (AHBPERIPH_BASE + 0x8)) - 0x4002001c PROVIDE (DMA_Channel2, (AHBPERIPH_BASE + 0x1c)) - 0x40020030 PROVIDE (DMA_Channel3, (AHBPERIPH_BASE + 0x30)) - 0x40020044 PROVIDE (DMA_Channel4, (AHBPERIPH_BASE + 0x44)) - 0x40020058 PROVIDE (DMA_Channel5, (AHBPERIPH_BASE + 0x58)) - 0x4002006c PROVIDE (DMA_Channel6, (AHBPERIPH_BASE + 0x6c)) - 0x40020080 PROVIDE (DMA_Channel7, (AHBPERIPH_BASE + 0x80)) - 0x40021000 PROVIDE (RCC, (AHBPERIPH_BASE + 0x1000)) - 0xe000e000 SCS_BASE = 0xe000e000 - 0xe000e010 PROVIDE (SysTick, (SCS_BASE + 0x10)) - 0xe000e100 PROVIDE (NVIC, (SCS_BASE + 0x100)) - 0xe000ed00 PROVIDE (SCB, (SCS_BASE + 0xd00)) - 0x20005000 _estack = 0x20005000 - -.isr_vector 0x08000000 0x0 - 0x08000000 . = ALIGN (0x4) - *(.isr_vector) - 0x08000000 . = ALIGN (0x4) - -.flashtext 0x08000000 0x0 - 0x08000000 . = ALIGN (0x4) - *(.flashtext) - 0x08000000 . = ALIGN (0x4) - -.text 0x08000000 0x0 - 0x08000000 . = ALIGN (0x4) - *(.text) - *(.text.*) - *(.rodata) - *(.rodata*) - *(.glue_7) - .glue_7 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .glue_7 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .glue_7 0x08000000 0x0 main.o - .glue_7 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .glue_7 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - *(.glue_7t) - .glue_7t 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .glue_7t 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .glue_7t 0x08000000 0x0 main.o - .glue_7t 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .glue_7t 0x08000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - 0x08000000 . = ALIGN (0x4) - 0x08000000 _etext = . - 0x08000000 _sidata = _etext - -.vfp11_veneer 0x20000000 0x0 - .vfp11_veneer 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .vfp11_veneer 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .vfp11_veneer 0x20000000 0x0 main.o - .vfp11_veneer 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .vfp11_veneer 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - -.v4_bx 0x20000000 0x0 - .v4_bx 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .v4_bx 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .v4_bx 0x20000000 0x0 main.o - .v4_bx 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .v4_bx 0x20000000 0x0 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - -.data 0x20000000 0x0 load address 0x08000000 - 0x20000000 . = ALIGN (0x4) - 0x20000000 _sdata = . - *(.data) - *(.data.*) - 0x20000000 . = ALIGN (0x4) - 0x20000000 _edata = . - -.bss 0x20000000 0x0 - 0x20000000 . = ALIGN (0x4) - 0x20000000 _sbss = . - *(.bss) - *(COMMON) - 0x20000000 . = ALIGN (0x4) - 0x20000000 _ebss = . - 0x20000000 PROVIDE (end, _ebss) - 0x20000000 PROVIDE (_end, _ebss) - -._usrstack 0x20000000 0x100 - 0x20000000 . = ALIGN (0x4) - 0x20000000 _susrstack = . - 0x20000100 . = (. + _Minimum_Stack_Size) - *fill* 0x20000000 0x100 00 - 0x20000100 . = ALIGN (0x4) - 0x20000100 _eusrstack = . - -.b1text - *(.b1text) - *(.b1rodata) - *(.b1rodata*) - -.eb0text - *(.eb0text) - *(.eb0rodata) - *(.eb0rodata*) - -.eb1text - *(.eb1text) - *(.eb1rodata) - *(.eb1rodata*) - -.eb2text - *(.eb2text) - *(.eb2rodata) - *(.eb2rodata*) - -.eb3text - *(.eb3text) - *(.eb3rodata) - *(.eb3rodata*) - 0x20000100 __exidx_start = . - 0x20000100 __exidx_end = . - -/DISCARD/ - libc.a(*) - libm.a(*) - libgcc.a(*) - -.stab - *(.stab) - -.stabstr - *(.stabstr) - -.stab.excl - *(.stab.excl) - -.stab.exclstr - *(.stab.exclstr) - -.stab.index - *(.stab.index) - -.stab.indexstr - *(.stab.indexstr) - -.comment 0x00000000 0x2b - *(.comment) - .comment 0x00000000 0x2b main.o - -.debug - *(.debug) - -.line - *(.line) - -.debug_srcinfo - *(.debug_srcinfo) - -.debug_sfnames - *(.debug_sfnames) - -.debug_aranges 0x00000000 0x20 - *(.debug_aranges) - .debug_aranges - 0x00000000 0x20 main.o - -.debug_pubnames - 0x00000000 0x7e - *(.debug_pubnames) - .debug_pubnames - 0x00000000 0x7e main.o - -.debug_info 0x00000000 0x45e - *(.debug_info .gnu.linkonce.wi.*) - .debug_info 0x00000000 0x45e main.o - -.debug_abbrev 0x00000000 0x105 - *(.debug_abbrev) - .debug_abbrev 0x00000000 0x105 main.o - -.debug_line 0x00000000 0xab - *(.debug_line) - .debug_line 0x00000000 0xab main.o - -.debug_frame 0x00000000 0x84 - *(.debug_frame) - .debug_frame 0x00000000 0x84 main.o - -.debug_str - *(.debug_str) - -.debug_loc 0x00000000 0xc4 - *(.debug_loc) - .debug_loc 0x00000000 0xc4 main.o - -.debug_macinfo - *(.debug_macinfo) - -.debug_weaknames - *(.debug_weaknames) - -.debug_funcnames - *(.debug_funcnames) - -.debug_typenames - *(.debug_typenames) - -.debug_varnames - *(.debug_varnames) -OUTPUT(main elf32-littlearm) - -.ARM.attributes - 0x00000000 0x31 - .ARM.attributes - 0x00000000 0x14 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o - .ARM.attributes - 0x00000014 0x2e c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o - .ARM.attributes - 0x00000042 0x31 main.o - .ARM.attributes - 0x00000073 0x2c c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtend.o - .ARM.attributes - 0x0000009f 0x14 c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtn.o - -Cross Reference Table - -Symbol File -Delay main.o -FLASH_PrefetchBufferCmd main.o -FLASH_SetLatency main.o -GPIO_Init main.o -GPIO_InitStructure main.o -GPIO_ResetBits main.o -GPIO_SetBits main.o -HSEStartUpStatus main.o -NVIC_Configuration main.o -NVIC_SetVectorTable main.o -RCC_APB2PeriphClockCmd main.o -RCC_Configuration main.o -RCC_DeInit main.o -RCC_GetFlagStatus main.o -RCC_GetSYSCLKSource main.o -RCC_HCLKConfig main.o -RCC_HSEConfig main.o -RCC_PCLK1Config main.o -RCC_PCLK2Config main.o -RCC_PLLCmd main.o -RCC_PLLConfig main.o -RCC_SYSCLKConfig main.o -RCC_WaitForHSEStartUp main.o -_Jv_RegisterClasses c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -__deregister_frame_info c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -__dso_handle c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -__register_frame_info c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crtbegin.o -_fini c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o -_init c:/program files/codesourcery/sourcery g++ lite/bin/../lib/gcc/arm-none-eabi/4.2.3/crti.o -main main.o diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/mainBkup.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/mainBkup.c deleted file mode 100755 index 936a09f..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/mainBkup.c +++ /dev/null @@ -1,265 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define DAC_DHR12RD_Address 0x40007420 - -/* Init Structure definition */ -DAC_InitTypeDef DAC_InitStructure; -DMA_InitTypeDef DMA_InitStructure; -TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -ErrorStatus HSEStartUpStatus; -uc16 Sine12bit[32] = {2047, 2447, 2831, 3185, 3498, 3750, 3939, 4056, 4095, 4056, - 3939, 3750, 3495, 3185, 2831, 2447, 2047, 1647, 1263, 909, - 599, 344, 155, 38, 0, 38, 155, 344, 599, 909, 1263, 1647}; - -u32 DualSine12bit[32]; -u8 Idx = 0; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); -void NVIC_Configuration(void); -void Delay(vu32 nCount); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* System Clocks Configuration */ - RCC_Configuration(); - - /* GPIO configuration */ - GPIO_Configuration(); - - /* NVIC Configuration */ - NVIC_Configuration(); - - /* TIM8 Configuration */ - /* Time base configuration */ - TIM_TimeBaseStructInit(&TIM_TimeBaseStructure); - TIM_TimeBaseStructure.TIM_Period = 0x19; - TIM_TimeBaseStructure.TIM_Prescaler = 0x0; - TIM_TimeBaseStructure.TIM_ClockDivision = 0x0; - TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; - TIM_TimeBaseInit(TIM8, &TIM_TimeBaseStructure); - - /* TIM8 TRGO selection */ - TIM_SelectOutputTrigger(TIM8, TIM_TRGOSource_Update); - - /* DAC channel1 Configuration */ - DAC_InitStructure.DAC_Trigger = DAC_Trigger_T8_TRGO; - DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None; - DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable; - DAC_Init(DAC_Channel_1, &DAC_InitStructure); - - /* DAC channel2 Configuration */ - DAC_Init(DAC_Channel_2, &DAC_InitStructure); - - /* Fill Sine32bit table */ - for (Idx= 0; Idx<32; Idx++) - { - DualSine12bit[Idx] = (Sine12bit[Idx] << 16) + (Sine12bit[Idx]); - } - - /* DMA2 channel4 configuration */ - DMA_DeInit(DMA2_Channel4); - DMA_InitStructure.DMA_PeripheralBaseAddr = DAC_DHR12RD_Address; - DMA_InitStructure.DMA_MemoryBaseAddr = (u32)&DualSine12bit; - DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST; - DMA_InitStructure.DMA_BufferSize = 32; - DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; - DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; - DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word; - DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word; - DMA_InitStructure.DMA_Mode = DMA_Mode_Circular; - DMA_InitStructure.DMA_Priority = DMA_Priority_High; - DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; - DMA_Init(DMA2_Channel4, &DMA_InitStructure); - - /* Enable DMA2 Channel4 */ - DMA_Cmd(DMA2_Channel4, ENABLE); - - /* Enable DAC Channel1 */ - DAC_Cmd(DAC_Channel_1, ENABLE); - /* Enable DAC Channel2 */ - DAC_Cmd(DAC_Channel_2, ENABLE); - - /* Enable DMA for DAC Channel2 */ - DAC_DMACmd(DAC_Channel_2, ENABLE); - - /* TIM8 enable counter */ - TIM_Cmd(TIM8, ENABLE); - - while (1) - { - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - -/* Enable peripheral clocks --------------------------------------------------*/ - /* DMA clock enable */ - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA2, ENABLE); - /* AFIO and GPIOA Periph clock enable */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO | RCC_APB2Periph_GPIOA, ENABLE); - /* DAC Periph clock enable */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE); - /* TIM8 Periph clock enable */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM8, ENABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the different GPIO ports. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Configure DAC channe1 and DAC channel2 outputs pins */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOA, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : NVIC_Configuration -* Description : Configures Vector Table base location. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Configuration(void) -{ -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif -} - -/******************************************************************************* -* Function Name : Delay -* Description : Inserts a delay time. -* Input : nCount: specifies the delay time length. -* Output : None -* Return : None -*******************************************************************************/ -void Delay(vu32 nCount) -{ - for(; nCount != 0; nCount--); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/makefile b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/makefile deleted file mode 100755 index ec9fcd6..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/makefile +++ /dev/null @@ -1,85 +0,0 @@ -# setup - -COMPILE_OPTS = -mcpu=cortex-m3 -mthumb -Wall -g -O0 -INCLUDE_DIRS = -I . -I lib/inc -LIBRARY_DIRS = -L lib - -CC = arm-none-eabi-gcc -CFLAGS = $(COMPILE_OPTS) $(INCLUDE_DIRS) - -CXX = arm-none-eabi-g++ -CXXFLAGS = $(COMPILE_OPTS) $(INCLUDE_DIRS) - -AS = arm-none-eabi-gcc -ASFLAGS = $(COMPILE_OPTS) -c - -LD = arm-none-eabi-gcc -LDFLAGS = -Wl,--gc-sections,-Map=$@.map,-cref,-u,Reset_Handler $(INCLUDE_DIRS) $(LIBRARY_DIRS) -T stm32.ld - -OBJCP = arm-none-eabi-objcopy -OBJCPFLAGS = -O binary - -AR = arm-none-eabi-ar -ARFLAGS = cr - -MAIN_OUT = main -MAIN_OUT_ELF = $(MAIN_OUT).elf -MAIN_OUT_BIN = $(MAIN_OUT).bin - -# all - -all: $(MAIN_OUT_ELF) $(MAIN_OUT_BIN) - -# main - -$(MAIN_OUT_ELF): main.o stm32f10x_it.o lib/libstm32.a - $(LD) $(LDFLAGS) main.o stm32f10x_it.o lib/libstm32.a --output $@ - -$(MAIN_OUT_BIN): $(MAIN_OUT_ELF) - $(OBJCP) $(OBJCPFLAGS) $< $@ - - -# flash - -# this is key, copy the .elf file under a new name into the jtag dir -# run openocd, and load the chip all in one step. -flash: $(MAIN_OUT) - @cp $(MAIN_OUT_ELF) jtag/flash - @cd jtag; openocd -f flash.cfg -# @rm jtag/flash - - -# libstm32.a - -LIBSTM32_OUT = lib/libstm32.a - -LIBSTM32_OBJS = \ - lib/src/stm32f10x_adc.o \ - lib/src/stm32f10x_bkp.o \ - lib/src/stm32f10x_can.o \ - lib/src/stm32f10x_dac.o \ - lib/src/stm32f10x_dma.o \ - lib/src/stm32f10x_exti.o \ - lib/src/stm32f10x_flash.o \ - lib/src/stm32f10x_gpio.o \ - lib/src/stm32f10x_i2c.o \ - lib/src/stm32f10x_iwdg.o \ - lib/src/stm32f10x_lib.o \ - lib/src/stm32f10x_nvic.o \ - lib/src/stm32f10x_pwr.o \ - lib/src/stm32f10x_rcc.o \ - lib/src/stm32f10x_rtc.o \ - lib/src/stm32f10x_spi.o \ - lib/src/stm32f10x_systick.o \ - lib/src/stm32f10x_tim.o \ - lib/src/stm32f10x_usart.o \ - lib/src/stm32f10x_wwdg.o - -$(LIBSTM32_OUT): $(LIBSTM32_OBJS) - $(AR) $(ARFLAGS) $@ $(LIBSTM32_OBJS) - -$(LIBSTM32_OBJS): stm32f10x_conf.h - - -clean: - -rm *.o lib/src/*.o $(LIBSTM32_OUT) $(MAIN_OUT_ELF) $(MAIN_OUT_BIN) diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/readme.txt b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/readme.txt deleted file mode 100755 index f369047..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/readme.txt +++ /dev/null @@ -1,69 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the DAC dual mode sine wave example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example describes how to use DAC dual channel mode with DMA to generate sine -waves on both DAC channels outpouts. - -Both DAC channels conversions are configured to be triggered by TIM8 TRGO triggers -and without noise/triangle wave generation. 12bit right data alignement is selected -since we choose to acces DAC_DHR12RD register. DMA2 channel4 is configured to -transfer continuously, word by word, a 32-word buffer to the dual DAC register -DAC_DHR12RD. - -The transfered 32buffer is made to have a sine wave generation on each DAC channel -output. Both DAC channels are then enabled. Only DAC channel2 DMA capability is enabled. - -Once TIM8 is enabled, each TIM8 TRGO update event generate a DMA request which -transfer data to the dual DAC register and DAC conversion is started. The sine -waves can be visualized by connecting both PA.04 and PA.05 pins to an oscilloscope. - - -Directory contents -================== -stm32f10x_conf.h Library Configuration file -stm32f10x_it.c Interrupt handlers -stm32f10x_it.h Header for stm32f10x_it.c -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210E-EVAL evaluation board and can be -easily tailored to any other hardware. - - - Connect PA.04 and PA.05 pins to an oscilloscope - - -How to use it -============= -In order to make the program work, you must do the following: -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files: - + stm32f10x_lib.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_flash.c - + stm32f10x_dac.c - + stm32f10x_dma.c - + stm32f10x_tim.c - -- Link all compiled files and load your image into target memory -- Run the example - - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32.ld b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32.ld deleted file mode 100755 index 5e4ce87..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32.ld +++ /dev/null @@ -1,29 +0,0 @@ -/* -Linker script for STM32F10x -Copyright RAISONANCE 2007 (modified by Lanchon 1-Feb-2008) -You can use, copy and distribute this file freely, but without any waranty. -Configure memory sizes, end of stack and boot mode for your project here. -*/ - - -/* include the common STM32F10x sub-script */ -INCLUDE "STM32_COMMON.ld" - -/* Memory Spaces Definitions */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K /* also change _estack below */ - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K - FLASHB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB0 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB2 (rx) : ORIGIN = 0x00000000, LENGTH = 0 - EXTMEMB3 (rx) : ORIGIN = 0x00000000, LENGTH = 0 -} - -/* highest address of the user mode stack */ -_estack = 0x20005000; - -/* include the section management sub-script */ -/* (either "STM32_SEC_FLASH.ld" or "STM32_SEC_RAM.ld") */ -INCLUDE "STM32_SEC_FLASH.ld" diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_conf.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_conf.h deleted file mode 100755 index 1e536c1..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_conf.h +++ /dev/null @@ -1,169 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -#define _ADC -#define _ADC1 -#define _ADC2 -#define _ADC3 - -/************************************* BKP ************************************/ -#define _BKP - -/************************************* CAN ************************************/ -#define _CAN - -/************************************* CRC ************************************/ -#define _CRC - -/************************************* DAC ************************************/ -#define _DAC - -/************************************* DBGMCU *********************************/ -#define _DBGMCU -/************************************* DMA ************************************/ -#define _DMA -#define _DMA1_Channel1 -#define _DMA1_Channel2 -#define _DMA1_Channel3 -#define _DMA1_Channel4 -#define _DMA1_Channel5 -#define _DMA1_Channel6 -#define _DMA1_Channel7 -#define _DMA2_Channel1 -#define _DMA2_Channel2 -#define _DMA2_Channel3 -#define _DMA2_Channel4 -#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -#define _GPIOA -#define _GPIOB -#define _GPIOC -#define _GPIOD -#define _GPIOE -#define _GPIOF -#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -#define _I2C -#define _I2C1 -#define _I2C2 - -/************************************* IWDG ***********************************/ -#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -#define _RTC - -/************************************* SDIO ***********************************/ -#define _SDIO - -/************************************* SPI ************************************/ -#define _SPI -#define _SPI1 -#define _SPI2 -#define _SPI3 - -/************************************* SysTick ********************************/ -#define _SysTick - -/************************************* TIM ************************************/ -#define _TIM -#define _TIM1 -#define _TIM2 -#define _TIM3 -#define _TIM4 -#define _TIM5 -#define _TIM6 -#define _TIM7 -#define _TIM8 - -/************************************* USART **********************************/ -#define _USART -#define _USART1 -#define _USART2 -#define _USART3 -#define _UART4 -#define _UART5 - -/************************************* WWDG ***********************************/ -#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_it.c b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_it.c deleted file mode 100755 index e27c1e7..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_it.c +++ /dev/null @@ -1,810 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_it.h b/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/DAC/DualModeDMA_SineWave/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/main.c b/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/main.c deleted file mode 100755 index 8bd0e49..0000000 --- a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/main.c +++ /dev/null @@ -1,242 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define DAC_DHR8R1_Address 0x40007410 - -/* Init Structure definition */ -DAC_InitTypeDef DAC_InitStructure; -DMA_InitTypeDef DMA_InitStructure; - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -ErrorStatus HSEStartUpStatus; -uc8 Escalator8bit[6] = {0x0, 0x33, 0x66, 0x99, 0xCC, 0xFF}; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); -void NVIC_Configuration(void); -void Delay(vu32 nCount); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* System Clocks Configuration */ - RCC_Configuration(); - - /* GPIO configuration */ - GPIO_Configuration(); - - /* NVIC Configuration */ - NVIC_Configuration(); - - /* TIM6 Configuration */ - TIM_PrescalerConfig(TIM6, 0xF, TIM_PSCReloadMode_Update); - TIM_SetAutoreload(TIM6, 0xFF); - /* TIM6 TRGO selection */ - TIM_SelectOutputTrigger(TIM6, TIM_TRGOSource_Update); - - /* DAC channel1 Configuration */ - DAC_InitStructure.DAC_Trigger = DAC_Trigger_T6_TRGO; - DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None; - DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable; - DAC_Init(DAC_Channel_1, &DAC_InitStructure); - - /* DMA2 channel3 configuration */ - DMA_DeInit(DMA2_Channel3); - DMA_InitStructure.DMA_PeripheralBaseAddr = DAC_DHR8R1_Address; - DMA_InitStructure.DMA_MemoryBaseAddr = (u32)&Escalator8bit; - DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST; - DMA_InitStructure.DMA_BufferSize = 6; - DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; - DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; - DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; - DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; - DMA_InitStructure.DMA_Mode = DMA_Mode_Circular; - DMA_InitStructure.DMA_Priority = DMA_Priority_High; - DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; - DMA_Init(DMA2_Channel3, &DMA_InitStructure); - - /* Enable DMA2 Channel3 */ - DMA_Cmd(DMA2_Channel3, ENABLE); - - /* Enable DAC Channel1 */ - DAC_Cmd(DAC_Channel_1, ENABLE); - - /* Enable DMA for DAC Channel1 */ - DAC_DMACmd(DAC_Channel_1, ENABLE); - - /* TIM6 enable counter */ - TIM_Cmd(TIM6, ENABLE); - - while (1) - { - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - -/* Enable peripheral clocks --------------------------------------------------*/ - /* DMA clock enable */ - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA2, ENABLE); - /* AFIO and GPIOA Periph clock enable */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO | RCC_APB2Periph_GPIOA, ENABLE); - /* DAC Periph clock enable */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE); - /* TIM6 Periph clock enable */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the different GPIO ports. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Configure DAC channe1 output pin */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOA, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : NVIC_Configuration -* Description : Configures Vector Table base location. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Configuration(void) -{ -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif -} - -/******************************************************************************* -* Function Name : Delay -* Description : Inserts a delay time. -* Input : nCount: specifies the delay time length. -* Output : None -* Return : None -*******************************************************************************/ -void Delay(vu32 nCount) -{ - for(; nCount != 0; nCount--); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/readme.txt b/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/readme.txt deleted file mode 100755 index d5e132a..0000000 --- a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/readme.txt +++ /dev/null @@ -1,68 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the DAC one channel DMA escalator example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example describes how to use one DAC channel mode with DMA to generate an -escalator signal on DAC channel1 outpout. - -DAC channel1 conversion is configured to be triggered by TIM6 TRGO triggers and -without noise/triangle wave generation. 8bit right data alignement is selected -since we choose to acces DAC_DHR8R1 register. -DMA2 channel3 is configured to transfer continuously, byte by byte, a 6-byte -buffer to the DAC1 register DAC_DHR8R1. - -The transfered 6bytes buffer is made to have an escalator signal on DAC channel1 -output. DAC channel1 is then enabled. Once TIM6 is enabled, each TIM6 TRGO update -event generate a DMA request which transfer data to the DAC1 register and DAC -conversion is started. The escalator signal can be visualized by connecting PA.04 -pin to an oscilloscope. - - -Directory contents -================== -stm32f10x_conf.h Library Configuration file -stm32f10x_it.c Interrupt handlers -stm32f10x_it.h Header for stm32f10x_it.c -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210E-EVAL evaluation board and can be -easily tailored to any other hardware. - - - Connect PA.04 pin to an oscilloscope - - -How to use it -============= -In order to make the program work, you must do the following: -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files: - + stm32f10x_lib.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_flash.c - + stm32f10x_dac.c - + stm32f10x_dma.c - + stm32f10x_tim.c - -- Link all compiled files and load your image into target memory -- Run the example - - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_conf.h b/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_conf.h deleted file mode 100755 index c5a71e0..0000000 --- a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_conf.h +++ /dev/null @@ -1,169 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -//#define _ADC -//#define _ADC1 -//#define _ADC2 -//#define _ADC3 - -/************************************* BKP ************************************/ -//#define _BKP - -/************************************* CAN ************************************/ -//#define _CAN - -/************************************* CRC ************************************/ -//#define _CRC - -/************************************* DAC ************************************/ -#define _DAC - -/************************************* DBGMCU *********************************/ -//#define _DBGMCU -/************************************* DMA ************************************/ -#define _DMA -//#define _DMA1_Channel1 -//#define _DMA1_Channel2 -//#define _DMA1_Channel3 -//#define _DMA1_Channel4 -//#define _DMA1_Channel5 -//#define _DMA1_Channel6 -//#define _DMA1_Channel7 -//#define _DMA2_Channel1 -//#define _DMA2_Channel2 -#define _DMA2_Channel3 -//#define _DMA2_Channel4 -//#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -//#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -//#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -#define _GPIOA -//#define _GPIOB -//#define _GPIOC -//#define _GPIOD -//#define _GPIOE -//#define _GPIOF -//#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -//#define _I2C -//#define _I2C1 -//#define _I2C2 - -/************************************* IWDG ***********************************/ -//#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -//#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -//#define _RTC - -/************************************* SDIO ***********************************/ -//#define _SDIO - -/************************************* SPI ************************************/ -//#define _SPI -//#define _SPI1 -//#define _SPI2 -//#define _SPI3 - -/************************************* SysTick ********************************/ -//#define _SysTick - -/************************************* TIM ************************************/ -#define _TIM -//#define _TIM1 -//#define _TIM2 -//#define _TIM3 -//#define _TIM4 -//#define _TIM5 -#define _TIM6 -//#define _TIM7 -//#define _TIM8 - -/************************************* USART **********************************/ -//#define _USART -//#define _USART1 -//#define _USART2 -//#define _USART3 -//#define _UART4 -//#define _UART5 - -/************************************* WWDG ***********************************/ -//#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.c b/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.c deleted file mode 100755 index e27c1e7..0000000 --- a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.c +++ /dev/null @@ -1,810 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.h b/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/main.c b/src/stm32lib/examples/DAC/OneChannel_NoiseWave/main.c deleted file mode 100755 index 7e4ea27..0000000 --- a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/main.c +++ /dev/null @@ -1,210 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Init Structure definition */ -DAC_InitTypeDef DAC_InitStructure; - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -ErrorStatus HSEStartUpStatus; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); -void NVIC_Configuration(void); -void Delay(vu32 nCount); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* System Clocks Configuration */ - RCC_Configuration(); - - /* GPIO configuration */ - GPIO_Configuration(); - - /* NVIC Configuration */ - NVIC_Configuration(); - - /* DAC channel1 Configuration */ - DAC_InitStructure.DAC_Trigger = DAC_Trigger_Software; - DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_Noise; - DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bits8_0; - DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable; - DAC_Init(DAC_Channel_1, &DAC_InitStructure); - - /* Enable DAC Channel1 */ - DAC_Cmd(DAC_Channel_1, ENABLE); - - /* Set DAC Channel1 DHR12L register */ - DAC_SetChannel1Data(DAC_Align_12b_L, 0x7FF0); - - while (1) - { - /* Start DAC Channel1 conversion by software */ - DAC_SoftwareTriggerCmd(DAC_Channel_1, ENABLE); - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - -/* Enable peripheral clocks --------------------------------------------------*/ - /* AFIO and GPIOA Periph clock enable */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO | RCC_APB2Periph_GPIOA, ENABLE); - /* DAC Periph clock enable */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the different GPIO ports. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Configure DAC channe1 output pin */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOA, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : NVIC_Configuration -* Description : Configures Vector Table base location. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Configuration(void) -{ -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif -} - -/******************************************************************************* -* Function Name : Delay -* Description : Inserts a delay time. -* Input : nCount: specifies the delay time length. -* Output : None -* Return : None -*******************************************************************************/ -void Delay(vu32 nCount) -{ - for(; nCount != 0; nCount--); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/readme.txt b/src/stm32lib/examples/DAC/OneChannel_NoiseWave/readme.txt deleted file mode 100755 index 5938e1b..0000000 --- a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/readme.txt +++ /dev/null @@ -1,67 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the DAC one channel noise wave example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example describes how to use one DAC channel to generate a signal with noise -waves on DAC Channel1 output. - -DAC channel1 conversion are configured to be triggered by software with noise wave -generation.12bit left data alignement is selected since we choose to acces DAC_DHR12L1 -register. Bits 0 to 8 are masked for the Linear feedback shift register. -DAC channel1 is then enabled. DAC Channel1 DHR12L1 register is configured to have -an output voltage of VREF/2. - -Software triggers are generated continuously in an infinite loop, and on each -trigger the DAC channel1 start the conversion and calculate the noise value to -apply on the DAC channel1 output. - -The output signal with noise waves can be visualized by connecting PA.04 pin to -an oscilloscope. - - -Directory contents -================== -stm32f10x_conf.h Library Configuration file -stm32f10x_it.c Interrupt handlers -stm32f10x_it.h Header for stm32f10x_it.c -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210E-EVAL evaluation board and can be -easily tailored to any other hardware. - - - Connect PA.04 pin to an oscilloscope - - -How to use it -============= -In order to make the program work, you must do the following: -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files: - + stm32f10x_lib.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_flash.c - + stm32f10x_dac.c - -- Link all compiled files and load your image into target memory -- Run the example - - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_conf.h b/src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_conf.h deleted file mode 100755 index b2b588f..0000000 --- a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_conf.h +++ /dev/null @@ -1,169 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -//#define _ADC -//#define _ADC1 -//#define _ADC2 -//#define _ADC3 - -/************************************* BKP ************************************/ -//#define _BKP - -/************************************* CAN ************************************/ -//#define _CAN - -/************************************* CRC ************************************/ -//#define _CRC - -/************************************* DAC ************************************/ -#define _DAC - -/************************************* DBGMCU *********************************/ -//#define _DBGMCU -/************************************* DMA ************************************/ -#define _DMA -//#define _DMA1_Channel1 -//#define _DMA1_Channel2 -//#define _DMA1_Channel3 -//#define _DMA1_Channel4 -//#define _DMA1_Channel5 -//#define _DMA1_Channel6 -//#define _DMA1_Channel7 -//#define _DMA2_Channel1 -//#define _DMA2_Channel2 -//#define _DMA2_Channel3 -#define _DMA2_Channel4 -//#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -//#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -//#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -#define _GPIOA -//#define _GPIOB -//#define _GPIOC -//#define _GPIOD -//#define _GPIOE -//#define _GPIOF -//#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -//#define _I2C -//#define _I2C1 -//#define _I2C2 - -/************************************* IWDG ***********************************/ -//#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -//#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -//#define _RTC - -/************************************* SDIO ***********************************/ -//#define _SDIO - -/************************************* SPI ************************************/ -//#define _SPI -//#define _SPI1 -//#define _SPI2 -//#define _SPI3 - -/************************************* SysTick ********************************/ -//#define _SysTick - -/************************************* TIM ************************************/ -#define _TIM -//#define _TIM1 -//#define _TIM2 -//#define _TIM3 -//#define _TIM4 -//#define _TIM5 -//#define _TIM6 -//#define _TIM7 -#define _TIM8 - -/************************************* USART **********************************/ -//#define _USART -//#define _USART1 -//#define _USART2 -//#define _USART3 -//#define _UART4 -//#define _UART5 - -/************************************* WWDG ***********************************/ -//#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_it.c b/src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_it.c deleted file mode 100755 index e27c1e7..0000000 --- a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_it.c +++ /dev/null @@ -1,810 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_it.h b/src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/DAC/OneChannel_NoiseWave/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/main.c b/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/main.c deleted file mode 100755 index 9a45e6d..0000000 --- a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/main.c +++ /dev/null @@ -1,232 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : main.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main program body. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Init Structure definition */ -DAC_InitTypeDef DAC_InitStructure; -TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -ErrorStatus HSEStartUpStatus; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); -void NVIC_Configuration(void); -void Delay(vu32 nCount); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : main -* Description : Main program. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -int main(void) -{ -#ifdef DEBUG - debug(); -#endif - - /* System Clocks Configuration */ - RCC_Configuration(); - - /* GPIO configuration */ - GPIO_Configuration(); - - /* NVIC Configuration */ - NVIC_Configuration(); - - /* TIM2 Configuration */ - TIM_TimeBaseStructInit(&TIM_TimeBaseStructure); - TIM_TimeBaseStructure.TIM_Period = 0xF; - TIM_TimeBaseStructure.TIM_Prescaler = 0xF; - TIM_TimeBaseStructure.TIM_ClockDivision = 0x0; - TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; - TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure); - - /* TIM2 TRGO selection */ - TIM_SelectOutputTrigger(TIM2, TIM_TRGOSource_Update); - - /* DAC channel1 Configuration */ - DAC_InitStructure.DAC_Trigger = DAC_Trigger_T2_TRGO; - DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_Triangle; - DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_TriangleAmplitude_2047; - DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable; - DAC_Init(DAC_Channel_1, &DAC_InitStructure); - - /* DAC channel2 Configuration */ - DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_TriangleAmplitude_1023; - DAC_Init(DAC_Channel_2, &DAC_InitStructure); - - /* Enable DAC Channel1 */ - DAC_Cmd(DAC_Channel_1, ENABLE); - - /* Enable DAC Channel2 */ - DAC_Cmd(DAC_Channel_2, ENABLE); - - /* Set DAC dual channel DHR12RD register */ - DAC_SetDualChannelData(DAC_Align_12b_R, 0x100, 0x100); - - /* TIM2 enable counter */ - TIM_Cmd(TIM2, ENABLE); - - while (1) - { - } -} - -/******************************************************************************* -* Function Name : RCC_Configuration -* Description : Configures the different system clocks. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) - { - } - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) - { - } - } - -/* Enable peripheral clocks --------------------------------------------------*/ - /* AFIO and GPIOA Periph clock enable */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO | RCC_APB2Periph_GPIOA, ENABLE); - /* DAC Periph clock enable */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE); - /* TIM2 Periph clock enable */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the different GPIO ports. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Configure DAC channe1 and DAC channel2 outputs pins */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOA, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : NVIC_Configuration -* Description : Configures Vector Table base location. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Configuration(void) -{ -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif -} - -/******************************************************************************* -* Function Name : Delay -* Description : Inserts a delay time. -* Input : nCount: specifies the delay time length. -* Output : None -* Return : None -*******************************************************************************/ -void Delay(vu32 nCount) -{ - for(; nCount != 0; nCount--); -} - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert_param error has occurred. -* Input : - file: pointer to the source file name -* - line: assert_param error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/readme.txt b/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/readme.txt deleted file mode 100755 index 2deaeb0..0000000 --- a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/readme.txt +++ /dev/null @@ -1,69 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : readme.txt -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Description of the DAC two channels triangle wave example. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -Example description -=================== -This example describes how to use two DAC channels to generate two different -signals with triangle waves on each DAC Channel output. - -DAC channels conversion are configured to be triggered by TIM2 TRGO with triangle -wave generation. 12bit right data alignement is selected since we choose to acces -both DAC_DHR12R1 and DAC_DHR12R2 registers. -A triangle amplitude of 2047 is selected for DAC channel1 and 1023 for DAC channel2. -Both DAC channels are then enabled. DAC Channel1 DHR12R1 and DAC channel2 DHR12R2 -registers are set to have a base output voltage of VREF/16 on each output. - -Once TIM2 is enabled, each TIM2 TRGO update event trigger both DAC channels start -of conversion. The triangle counter is incremented, added to the base value and -applied to the corresponding DAC channel output. The same calculation is repeated -on each trigger. -The triangle waves can be visualized by connecting both PA.04 and PA.05 pins to -an oscilloscope. - - -Directory contents -================== -stm32f10x_conf.h Library Configuration file -stm32f10x_it.c Interrupt handlers -stm32f10x_it.h Header for stm32f10x_it.c -main.c Main program - - -Hardware environment -==================== -This example runs on STMicroelectronics STM3210E-EVAL evaluation board and can be -easily tailored to any other hardware. - - - Connect PA.04 and PA.05 pins to an oscilloscope - - -How to use it -============= -In order to make the program work, you must do the following: -- Create a project and setup all your toolchain's start-up files -- Compile the directory content files and required Library files: - + stm32f10x_lib.c - + stm32f10x_gpio.c - + stm32f10x_rcc.c - + stm32f10x_nvic.c - + stm32f10x_flash.c - + stm32f10x_dac.c - + stm32f10x_tim.c - -- Link all compiled files and load your image into target memory -- Run the example - - -******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****** diff --git a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_conf.h b/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_conf.h deleted file mode 100755 index 96884e4..0000000 --- a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_conf.h +++ /dev/null @@ -1,170 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/*#define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -//#define _ADC -//#define _ADC1 -//#define _ADC2 -//#define _ADC3 - -/************************************* BKP ************************************/ -//#define _BKP - -/************************************* CAN ************************************/ -//#define _CAN - -/************************************* CRC ************************************/ -//#define _CRC - -/************************************* DAC ************************************/ -#define _DAC - -/************************************* DBGMCU *********************************/ -//#define _DBGMCU - -/************************************* DMA ************************************/ -//#define _DMA -//#define _DMA1_Channel1 -//#define _DMA1_Channel2 -//#define _DMA1_Channel3 -//#define _DMA1_Channel4 -//#define _DMA1_Channel5 -//#define _DMA1_Channel6 -//#define _DMA1_Channel7 -//#define _DMA2_Channel1 -//#define _DMA2_Channel2 -//#define _DMA2_Channel3 -//#define _DMA2_Channel4 -//#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -//#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -//#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -#define _GPIOA -//#define _GPIOB -//#define _GPIOC -//#define _GPIOD -//#define _GPIOE -//#define _GPIOF -//#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -//#define _I2C -//#define _I2C1 -//#define _I2C2 - -/************************************* IWDG ***********************************/ -//#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -//#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -//#define _RTC - -/************************************* SDIO ***********************************/ -//#define _SDIO - -/************************************* SPI ************************************/ -//#define _SPI -//#define _SPI1 -//#define _SPI2 -//#define _SPI3 - -/************************************* SysTick ********************************/ -//#define _SysTick - -/************************************* TIM ************************************/ -#define _TIM -//#define _TIM1 -#define _TIM2 -//#define _TIM3 -//#define _TIM4 -//#define _TIM5 -//#define _TIM6 -//#define _TIM7 -//#define _TIM8 - -/************************************* USART **********************************/ -//#define _USART -//#define _USART1 -//#define _USART2 -//#define _USART3 -//#define _UART4 -//#define _UART5 - -/************************************* WWDG ***********************************/ -//#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.c b/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.c deleted file mode 100755 index e27c1e7..0000000 --- a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.c +++ /dev/null @@ -1,810 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.h b/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.h deleted file mode 100755 index e74b6cc..0000000 --- a/src/stm32lib/examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.1 -* Date : 06/13/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void PendSVC(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN_TX_IRQHandler(void); -void USB_LP_CAN_RX0_IRQHandler(void); -void CAN_RX1_IRQHandler(void); -void CAN_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3