From e62227806e9f15923030644d2bcdfa2692afaf7c Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Thu, 1 Sep 2011 14:37:51 -0400 Subject: hardware/maple: Errata tweaks. - dipropylene glycol methyl ether acetate - barrel jack silk errors were marked over --- source/hardware/maple.rst | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'source') diff --git a/source/hardware/maple.rst b/source/hardware/maple.rst index 69c3845..ca2afd7 100644 --- a/source/hardware/maple.rst +++ b/source/hardware/maple.rst @@ -108,6 +108,9 @@ board from another source, or you could damage it. supplied by up to 18 V. We recommend a barrel jack input voltage **no greater than 12 V**. + Rev5s manufactured after Spring 2011 may still have this error on + the silk, but it has been marked over. + See :ref:`this erratum ` for more information. Using the Built-in Battery Charger @@ -503,9 +506,10 @@ Rev 3 For reference, the button part number is KMR211GLFS and the flux remover we used is "Precision Electronics Cleaner" from RadioShack, - which is "Safe on most plastics" and contains Dipropylene glycol + which is "Safe on most plastics" and contains: dipropylene glycol monomethyl ether, hydrotreated heavy naphtha, dipropylene glycol - methyl ether acetate, and carbon dioxide. + methyl ether acetate (say that three times fast!), and carbon + dioxide. * **Resistors on pins 0 and 1**: these header pins, which are RX/TX on USART2 (:ref:`Serial2 `), have resistors in-line -- cgit v1.2.3