From 7645bf2d485a74e11ae55fe1f281ff68fc49290f Mon Sep 17 00:00:00 2001
From: Marti Bolivar <mbolivar@leaflabs.com>
Date: Fri, 22 Jun 2012 14:44:15 -0400
Subject: I2C: Move CCR/TRISE config helper back to libmaple/i2c.c.

We can implement it in terms of _i2c_bus_clk() instead of hard-coding
STM32_PCLK1.

This might be overkill, since I2C peripherals are slow and thus likely
to be on APB1 for all STM32 devices (that is the case for F2/F4, for
instance), but if we're going to have _i2c_bus_clk(), we might as well
respect it.

Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
---
 libmaple/i2c.c         | 42 +++++++++++++++++++++++++++++++++++++++++-
 libmaple/stm32f1/i2c.c | 36 ------------------------------------
 2 files changed, 41 insertions(+), 37 deletions(-)

(limited to 'libmaple')

diff --git a/libmaple/i2c.c b/libmaple/i2c.c
index 3c92bef..9c93d3f 100644
--- a/libmaple/i2c.c
+++ b/libmaple/i2c.c
@@ -47,6 +47,7 @@
 static inline int32 wait_for_state_change(i2c_dev *dev,
                                           i2c_state state,
                                           uint32 timeout);
+static void set_ccr_trise(i2c_dev *dev, uint32 flags);
 
 /**
  * @brief Fill data register with slave address
@@ -190,7 +191,7 @@ void i2c_master_enable(i2c_dev *dev, uint32 flags) {
     i2c_config_gpios(dev);
 
     /* Configure clock and rise time */
-    _i2c_set_ccr_trise(dev, flags);
+    set_ccr_trise(dev, flags);
 
     /* Enable event and buffer interrupts */
     nvic_irq_enable(dev->ev_nvic_line);
@@ -467,3 +468,42 @@ void _i2c_irq_error_handler(i2c_dev *dev) {
     i2c_disable_irq(dev, I2C_IRQ_BUFFER | I2C_IRQ_EVENT | I2C_IRQ_ERROR);
     dev->state = I2C_STATE_ERROR;
 }
+
+/*
+ * CCR/TRISE configuration helper
+ */
+static void set_ccr_trise(i2c_dev *dev, uint32 flags) {
+    uint32 ccr     = 0;
+    uint32 trise   = 0;
+    uint32 clk_mhz = _i2c_bus_clk(dev);
+    uint32 clk_hz  = clk_mhz * (1000 * 1000);
+
+    i2c_set_input_clk(dev, clk_mhz);
+
+    if (flags & I2C_FAST_MODE) {
+        ccr |= I2C_CCR_FS;
+
+        if (flags & I2C_DUTY_16_9) {
+            /* Tlow/Thigh = 16/9 */
+            ccr |= I2C_CCR_DUTY_16_9;
+            ccr |= clk_hz / (400000 * 25);
+        } else {
+            /* Tlow/Thigh = 2 */
+            ccr |= clk_hz / (400000 * 3);
+        }
+
+        trise = (300 * clk_mhz / 1000) + 1;
+    } else {
+        /* Tlow/Thigh = 1 */
+        ccr = clk_hz / (100000 * 2);
+        trise = clk_mhz + 1;
+    }
+
+    /* Set minimum required value if CCR < 1*/
+    if ((ccr & I2C_CCR_CCR) == 0) {
+        ccr |= 0x1;
+    }
+
+    i2c_set_clk_control(dev, ccr);
+    i2c_set_trise(dev, trise);
+}
diff --git a/libmaple/stm32f1/i2c.c b/libmaple/stm32f1/i2c.c
index 3e0e146..8439793 100644
--- a/libmaple/stm32f1/i2c.c
+++ b/libmaple/stm32f1/i2c.c
@@ -127,39 +127,3 @@ void _i2c_irq_priority_fixup(i2c_dev *dev) {
     nvic_irq_set_priority(dev->ev_nvic_line, 0);
     nvic_irq_set_priority(dev->er_nvic_line, 0);
 }
-
-void _i2c_set_ccr_trise(i2c_dev *dev, uint32 flags) {
-#define I2C_CLK                (STM32_PCLK1/1000000)
-    uint32 ccr   = 0;
-    uint32 trise = 0;
-
-    /* I2C1 and I2C2 are fed from APB1, clocked at 36MHz */
-    i2c_set_input_clk(dev, I2C_CLK);
-
-    if (flags & I2C_FAST_MODE) {
-        ccr |= I2C_CCR_FS;
-
-        if (flags & I2C_DUTY_16_9) {
-            /* Tlow/Thigh = 16/9 */
-            ccr |= I2C_CCR_DUTY;
-            ccr |= STM32_PCLK1/(400000 * 25);
-        } else {
-            /* Tlow/Thigh = 2 */
-            ccr |= STM32_PCLK1/(400000 * 3);
-        }
-
-        trise = (300 * (I2C_CLK)/1000) + 1;
-    } else {
-        /* Tlow/Thigh = 1 */
-        ccr = STM32_PCLK1/(100000 * 2);
-        trise = I2C_CLK + 1;
-    }
-
-    /* Set minimum required value if CCR < 1*/
-    if ((ccr & I2C_CCR_CCR) == 0) {
-        ccr |= 0x1;
-    }
-
-    i2c_set_clk_control(dev, ccr);
-    i2c_set_trise(dev, trise);
-}
-- 
cgit v1.2.3