From f4cdcfa51096f73a49642c400681d91847137dfb Mon Sep 17 00:00:00 2001 From: Perry Hung Date: Fri, 18 Feb 2011 05:22:39 -0500 Subject: checkpoint --- libmaple/stm32.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 libmaple/stm32.h (limited to 'libmaple/stm32.h') diff --git a/libmaple/stm32.h b/libmaple/stm32.h new file mode 100644 index 0000000..e65b28c --- /dev/null +++ b/libmaple/stm32.h @@ -0,0 +1,12 @@ +/** + * @brief General STM32 specific definitions + */ + +#ifndef _STM32_H_ +#define _STM32_H_ + +#define PCLK1 36000000U +#define PCLK2 72000000U + +#endif + -- cgit v1.2.3 From 9872b3975bd40c55652bb9dead5f54e2be9740d0 Mon Sep 17 00:00:00 2001 From: Perry Hung Date: Thu, 10 Mar 2011 00:04:58 -0500 Subject: Fix merge error and compile error. --- libmaple/delay.h | 22 +++++++ libmaple/i2c.c | 168 ++++++++++++---------------------------------------- libmaple/i2c.h | 116 ++++++++++++++++++++++++++++-------- libmaple/libmaple.h | 2 + libmaple/rcc.c | 2 +- libmaple/stm32.h | 10 ++++ main.cpp | 28 ++++++--- wirish/time.c | 13 +--- 8 files changed, 186 insertions(+), 175 deletions(-) create mode 100644 libmaple/delay.h (limited to 'libmaple/stm32.h') diff --git a/libmaple/delay.h b/libmaple/delay.h new file mode 100644 index 0000000..10839c9 --- /dev/null +++ b/libmaple/delay.h @@ -0,0 +1,22 @@ +/** + * @brief + */ + +#ifndef _DELAY_H_ +#define _DELAY_H_ + +static inline void delay_us(uint32 us) { + /* So (2^32)/12 micros max, or less than 6 minutes */ + us *= 12; + + /* fudge for function call overhead */ + us--; + asm volatile(" mov r0, %[us] \n\t" + "1: subs r0, #1 \n\t" + " bhi 1b \n\t" + : + : [us] "r" (us) + : "r0"); +} +#endif + diff --git a/libmaple/i2c.c b/libmaple/i2c.c index 1a595f5..3e948f6 100644 --- a/libmaple/i2c.c +++ b/libmaple/i2c.c @@ -39,11 +39,12 @@ /* 2/17 Started 10pm-4am * 2/19 Started 7pm-2am * 2/20 Started 7pm-7pm - * 2/23 Started 8pm */ + * 2/23 Started 8pm-8am + * 3/9 Started 11pm */ static inline int32 wait_for_state_change(i2c_dev *dev, i2c_state state); -i2c_dev i2c_dev1 = { +static i2c_dev i2c_dev1 = { .regs = (i2c_reg_map*)I2C1_BASE, .gpio_port = GPIOB_BASE, .sda_pin = 7, @@ -54,30 +55,13 @@ i2c_dev i2c_dev1 = { .state = I2C_STATE_IDLE }; +i2c_dev* const I2C1 = &i2c_dev1; + /** * @brief IRQ handler for i2c master. Handles transmission/reception. * @param dev i2c device */ -void delay_us(uint32 us) { - /* So (2^32)/12 micros max, or less than 6 minutes */ - us *= 12; - - /* fudge for function call overhead */ - us--; - asm volatile(" mov r0, %[us] \n\t" - "1: subs r0, #1 \n\t" - " bhi 1b \n\t" - : - : [us] "r" (us) - : "r0"); -} -static inline void debug_toggle(uint32 delay) { - gpio_write_bit(GPIOA_BASE, 5, 1); - delay_us(delay); - gpio_write_bit(GPIOA_BASE, 5, 0); -} - struct crumb { uint32 event; uint32 sr1; @@ -125,15 +109,15 @@ static void i2c_irq_handler(i2c_dev *dev) { */ if (sr1 & I2C_SR1_SB) { msg->xferred = 0; - i2c_enable_irq(dev->regs, I2C_IRQ_BUFFER); + i2c_enable_irq(dev, I2C_IRQ_BUFFER); /* * Master receiver */ if (read) { - i2c_enable_ack(dev->regs); + i2c_enable_ack(dev); } - i2c_send_slave_addr(dev->regs, msg->addr, read); + i2c_send_slave_addr(dev, msg->addr, read); sr1 = sr2 = 0; } @@ -148,13 +132,13 @@ static void i2c_irq_handler(i2c_dev *dev) { */ if (read) { if (msg->length == 1) { - i2c_disable_ack(dev->regs); + i2c_disable_ack(dev); dev->msgs_left--; if (dev->msgs_left) { - i2c_start_condition(dev->regs); + i2c_start_condition(dev); leave_big_crumb(RX_ADDR_START, 0, 0); } else { - i2c_stop_condition(dev->regs); + i2c_stop_condition(dev); leave_big_crumb(RX_ADDR_STOP, 0, 0); } } @@ -163,7 +147,7 @@ static void i2c_irq_handler(i2c_dev *dev) { * Master transmitter: write first byte to fill shift register. * We should get another TXE interrupt immediately to fill DR again. */ - i2c_write(dev->regs, msg->data[msg->xferred++]); + i2c_write(dev, msg->data[msg->xferred++]); } sr1 = sr2 = 0; } @@ -176,13 +160,13 @@ static void i2c_irq_handler(i2c_dev *dev) { if ((sr1 & I2C_SR1_TXE) && !(sr1 & I2C_SR1_BTF)) { leave_big_crumb(TXE_ONLY, 0, 0); if (dev->msgs_left) { - i2c_write(dev->regs, msg->data[msg->xferred++]); + i2c_write(dev, msg->data[msg->xferred++]); if (msg->xferred == msg->length) { /* * End of this message. Turn off TXE/RXNE and wait for * BTF to send repeated start or stop condition. */ - i2c_disable_irq(dev->regs, I2C_IRQ_BUFFER); + i2c_disable_irq(dev, I2C_IRQ_BUFFER); dev->msgs_left--; } } else { @@ -207,18 +191,21 @@ static void i2c_irq_handler(i2c_dev *dev) { * won't interrupt, but if we don't disable ITEVTEN, BTF will * continually interrupt us. What the fuck ST? */ - i2c_start_condition(dev->regs); + i2c_start_condition(dev); while (!(dev->regs->SR1 & I2C_SR1_SB)) ; dev->msg++; } else { - i2c_stop_condition(dev->regs); + i2c_stop_condition(dev); +// while (dev->regs->CR1 & I2C_CR1_STOP) { +// ; +// } /* * Turn off event interrupts to keep BTF from firing until the end * of the stop condition. Why on earth they didn't have a start/stop * condition request clear BTF is beyond me. */ - i2c_disable_irq(dev->regs, I2C_IRQ_EVENT); + i2c_disable_irq(dev, I2C_IRQ_EVENT); leave_big_crumb(STOP_SENT, 0, 0); dev->state = I2C_STATE_XFER_DONE; } @@ -238,12 +225,12 @@ static void i2c_irq_handler(i2c_dev *dev) { * RXNE interrupt before shutting things down. */ if (msg->xferred == (msg->length - 1)) { - i2c_disable_ack(dev->regs); + i2c_disable_ack(dev); if (dev->msgs_left > 2) { - i2c_start_condition(dev->regs); + i2c_start_condition(dev); leave_big_crumb(RXNE_START_SENT, 0, 0); } else { - i2c_stop_condition(dev->regs); + i2c_stop_condition(dev); leave_big_crumb(RXNE_STOP_SENT, 0, 0); } } else if (msg->xferred == msg->length) { @@ -262,11 +249,18 @@ static void i2c_irq_handler(i2c_dev *dev) { } void __irq_i2c1_ev(void) { - i2c_dev *dev = I2C1; - i2c_irq_handler(dev); + i2c_irq_handler(&i2c_dev1); +} + +static void i2c_irq_error_handler(i2c_dev *dev) { + __error(); } -static void i2c_bus_reset(i2c_dev *dev) { +void __irq_i2c1_er(void) { + i2c_irq_error_handler(&i2c_dev1); +} + +static void i2c_bus_reset(const i2c_dev *dev) { /* Release both lines */ gpio_write_bit(dev->gpio_port, dev->scl_pin, 1); gpio_write_bit(dev->gpio_port, dev->sda_pin, 1); @@ -322,21 +316,21 @@ void i2c_master_enable(i2c_dev *dev, uint32 flags) { gpio_set_mode(dev->gpio_port, dev->scl_pin, GPIO_MODE_AF_OUTPUT_OD); /* I2C1 and I2C2 are fed from APB1, clocked at 36MHz */ - i2c_set_input_clk(dev->regs, 36); + i2c_set_input_clk(dev, 36); /* 100 khz only for now */ - i2c_set_clk_control(dev->regs, STANDARD_CCR); + i2c_set_clk_control(dev, STANDARD_CCR); /* * Set scl rise time, standard mode for now. * Max rise time in standard mode: 1000 ns * Max rise time in fast mode: 300ns */ - i2c_set_trise(dev->regs, STANDARD_TRISE); + i2c_set_trise(dev, STANDARD_TRISE); /* Enable event and buffer interrupts */ nvic_irq_enable(dev->ev_nvic_line); - i2c_enable_irq(dev->regs, I2C_IRQ_EVENT | I2C_IRQ_BUFFER); + i2c_enable_irq(dev, I2C_IRQ_EVENT | I2C_IRQ_BUFFER); /* * Important STM32 Errata: @@ -368,13 +362,12 @@ void i2c_master_enable(i2c_dev *dev, uint32 flags) { nvic_irq_set_priority(dev->ev_nvic_line, 0); /* Make it go! */ - i2c_peripheral_enable(dev->regs); + i2c_peripheral_enable(dev); } int32 i2c_master_xfer(i2c_dev *dev, i2c_msg *msgs, uint16 num) { int32 rc; - static int times = 0; dev->msg = msgs; dev->msgs_left = num; @@ -389,7 +382,7 @@ int32 i2c_master_xfer(i2c_dev *dev, i2c_msg *msgs, uint16 num) { dev->state = I2C_STATE_BUSY; - i2c_start_condition(dev->regs); + i2c_start_condition(dev); rc = wait_for_state_change(dev, I2C_STATE_XFER_DONE); if (rc < 0) { goto out; @@ -414,89 +407,6 @@ static inline int32 wait_for_state_change(i2c_dev *dev, i2c_state state) { } -/* - * Low level register twiddling functions - */ - -/** - * @brief turn on an i2c peripheral - * @param map i2c peripheral register base - */ -void i2c_peripheral_enable(i2c_reg_map *regs) { - regs->CR1 |= I2C_CR1_PE; -} - -/** - * @brief turn off an i2c peripheral - * @param map i2c peripheral register base - */ -void i2c_peripheral_disable(i2c_reg_map *regs) { - regs->CR1 &= ~I2C_CR1_PE; -} - -/** - * @brief Set input clock frequency, in mhz - * @param device to configure - * @param freq frequency in megahertz (2-36) - */ -void i2c_set_input_clk(i2c_reg_map *regs, uint32 freq) { - uint32 cr2 = regs->CR2; - cr2 &= ~I2C_CR2_FREQ; - cr2 |= freq; - regs->CR2 = freq; -} - -void i2c_set_clk_control(i2c_reg_map *regs, uint32 val) { - uint32 ccr = regs->CCR; - ccr &= ~I2C_CCR_CCR; - ccr |= val; - regs->CCR = ccr; -} - -void i2c_set_fast_mode(i2c_reg_map *regs) { - regs->CCR |= I2C_CCR_FS; -} - -void i2c_set_standard_mode(i2c_reg_map *regs) { - regs->CCR &= ~I2C_CCR_FS; -} - -/** - * @brief Set SCL rise time - * @param - */ - -void i2c_set_trise(i2c_reg_map *regs, uint32 trise) { - regs->TRISE = trise; -} - -void i2c_start_condition(i2c_reg_map *regs) { - regs->CR1 |= I2C_CR1_START; -} - -void i2c_stop_condition(i2c_reg_map *regs) { - regs->CR1 |= I2C_CR1_STOP; -} - -void i2c_send_slave_addr(i2c_reg_map *regs, uint32 addr, uint32 rw) { - regs->DR = (addr << 1) | rw; -} - -void i2c_enable_irq(i2c_reg_map *regs, uint32 irqs) { - regs->CR2 |= irqs; -} - -void i2c_disable_irq(i2c_reg_map *regs, uint32 irqs) { - regs->CR2 &= ~irqs; -} - -void i2c_enable_ack(i2c_reg_map *regs) { - regs->CR1 |= I2C_CR1_ACK; -} - -void i2c_disable_ack(i2c_reg_map *regs) { - regs->CR1 &= ~I2C_CR1_ACK; -} diff --git a/libmaple/i2c.h b/libmaple/i2c.h index 2e6d00d..be05615 100644 --- a/libmaple/i2c.h +++ b/libmaple/i2c.h @@ -72,14 +72,10 @@ typedef struct i2c_dev { } i2c_dev; -extern i2c_dev i2c_dev1; -extern i2c_dev i2c_dev2; +extern i2c_dev* const I2C1; -#define I2C1 (i2c_dev*)&i2c_dev1 -#define I2C2 (i2c_dev*)&i2c_dev2 - -#define I2C1_BASE 0x40005400 -#define I2C2_BASE 0x40005800 +#define I2C1_BASE (i2c_reg_map*)0x40005400 +#define I2C2_BASE (i2c_reg_map*)0x40005800 /* i2c enable options */ #define I2C_FAST_MODE 0x1 // 400 khz @@ -140,28 +136,98 @@ extern "C" { void i2c_master_enable(i2c_dev *dev, uint32 flags); int32 i2c_master_xfer(i2c_dev *dev, i2c_msg *msgs, uint16 num); -void i2c_start_condition(i2c_reg_map *regs); -void i2c_stop_condition(i2c_reg_map *regs); -void i2c_send_slave_addr(i2c_reg_map *regs, uint32 addr, uint32 rw); -void i2c_set_input_clk(i2c_reg_map *regs, uint32 freq); -void i2c_set_clk_control(i2c_reg_map *regs, uint32 val); -void i2c_set_fast_mode(i2c_reg_map *regs); -void i2c_set_standard_mode(i2c_reg_map *regs); -void i2c_set_trise(i2c_reg_map *regs, uint32 trise); -void i2c_enable_ack(i2c_reg_map *regs); -void i2c_disable_ack(i2c_reg_map *regs); - -/* interrupt flags */ +static inline void i2c_write(i2c_dev *dev, uint8 byte) { + dev->regs->DR = byte; +} + +/* + * Low level register twiddling functions + */ + +/** + * @brief turn on an i2c peripheral + * @param map i2c peripheral register base + */ +static inline void i2c_peripheral_enable(i2c_dev *dev) { + dev->regs->CR1 |= I2C_CR1_PE; +} + +/** + * @brief turn off an i2c peripheral + * @param map i2c peripheral register base + */ +static inline void i2c_peripheral_disable(i2c_dev *dev) { + dev->regs->CR1 &= ~I2C_CR1_PE; +} + +/** + * @brief Set input clock frequency, in mhz + * @param device to configure + * @param freq frequency in megahertz (2-36) + */ +static inline void i2c_set_input_clk(i2c_dev *dev, uint32 freq) { + uint32 cr2 = dev->regs->CR2; + cr2 &= ~I2C_CR2_FREQ; + cr2 |= freq; + dev->regs->CR2 = freq; +} + +static inline void i2c_set_clk_control(i2c_dev *dev, uint32 val) { + uint32 ccr = dev->regs->CCR; + ccr &= ~I2C_CCR_CCR; + ccr |= val; + dev->regs->CCR = ccr; +} + +static inline void i2c_set_fast_mode(i2c_dev *dev) { + dev->regs->CCR |= I2C_CCR_FS; +} + +static inline void i2c_set_standard_mode(i2c_dev *dev) { + dev->regs->CCR &= ~I2C_CCR_FS; +} + +/** + * @brief Set SCL rise time + * @param + */ +static inline void i2c_set_trise(i2c_dev *dev, uint32 trise) { + dev->regs->TRISE = trise; +} + +extern void toggle(void); +static inline void i2c_start_condition(i2c_dev *dev) { + uint32 cr1 = dev->regs->CR1; +// if (cr1 & (I2C_CR1_START | I2C_CR1_STOP | I2C_CR1_PEC)) { +// } + dev->regs->CR1 |= I2C_CR1_START; +} + +static inline void i2c_stop_condition(i2c_dev *dev) { + dev->regs->CR1 |= I2C_CR1_STOP; +} + +static inline void i2c_send_slave_addr(i2c_dev *dev, uint32 addr, uint32 rw) { + dev->regs->DR = (addr << 1) | rw; +} + #define I2C_IRQ_ERROR I2C_CR2_ITERREN #define I2C_IRQ_EVENT I2C_CR2_ITEVTEN #define I2C_IRQ_BUFFER I2C_CR2_ITBUFEN -void i2c_enable_irq(i2c_reg_map *regs, uint32 irqs); -void i2c_disable_irq(i2c_reg_map *regs, uint32 irqs); -void i2c_peripheral_enable(i2c_reg_map *regs); -void i2c_peripheral_disable(i2c_reg_map *regs); +static inline void i2c_enable_irq(i2c_dev *dev, uint32 irqs) { + dev->regs->CR2 |= irqs; +} + +static inline void i2c_disable_irq(i2c_dev *dev, uint32 irqs) { + dev->regs->CR2 &= ~irqs; +} + +static inline void i2c_enable_ack(i2c_dev *dev) { + dev->regs->CR1 |= I2C_CR1_ACK; +} -static inline void i2c_write(i2c_reg_map *regs, uint8 byte) { - regs->DR = byte; +static inline void i2c_disable_ack(i2c_dev *dev) { + dev->regs->CR1 &= ~I2C_CR1_ACK; } #ifdef __cplusplus diff --git a/libmaple/libmaple.h b/libmaple/libmaple.h index 6b75c96..50887bc 100644 --- a/libmaple/libmaple.h +++ b/libmaple/libmaple.h @@ -31,7 +31,9 @@ #define _LIBMAPLE_H_ #include "libmaple_types.h" +#include "stm32.h" #include "util.h" +#include "delay.h" /* * Where to put usercode, based on space reserved for bootloader. diff --git a/libmaple/rcc.c b/libmaple/rcc.c index d3fb6a3..6445958 100644 --- a/libmaple/rcc.c +++ b/libmaple/rcc.c @@ -75,7 +75,7 @@ static const struct rcc_dev_info rcc_dev_table[] = { [RCC_DMA1] = { .clk_domain = AHB, .line_num = 0 }, [RCC_DMA2] = { .clk_domain = AHB, .line_num = 1 }, // High-density only [RCC_PWR] = { .clk_domain = APB1, .line_num = 28}, - [RCC_BKP] = { .clk_domain = APB1, .line_num = 27} + [RCC_BKP] = { .clk_domain = APB1, .line_num = 27}, [RCC_I2C1] = { .clk_domain = APB1, .line_num = 21 }, // High-density only [RCC_I2C2] = { .clk_domain = APB1, .line_num = 22 }, // High-density only }; diff --git a/libmaple/stm32.h b/libmaple/stm32.h index e65b28c..21c18df 100644 --- a/libmaple/stm32.h +++ b/libmaple/stm32.h @@ -8,5 +8,15 @@ #define PCLK1 36000000U #define PCLK2 72000000U +#ifdef STM32_MEDIUM_DENSITY + #define NR_INTERRUPTS 43 +#else +#ifdef STM32_HIGH_DENSITY + #define NR_INTERRUPTS 60 +#else +#error "No STM32 board type defined!" +#endif +#endif + #endif diff --git a/main.cpp b/main.cpp index 5e3ddf3..7771fa7 100644 --- a/main.cpp +++ b/main.cpp @@ -6,19 +6,29 @@ static const uint8 slave_address = 0b1010001; -#define NR_ELEMENTS 64 +#define NR_ELEMENTS 4 uint8 buf0[NR_ELEMENTS + 2] = {0x0, 0x0}; uint8 buf1[] = {0x0, 0x0}; uint8 buf2[NR_ELEMENTS]; +i2c_msg msgs[3]; + +void toggle(void) { + digitalWrite(2, HIGH); + digitalWrite(2, LOW); +} + void setup() { - i2c_msg msgs[3]; uint32 i; pinMode(BOARD_LED_PIN, OUTPUT); + pinMode(2, OUTPUT); + Serial2.begin(9600); + Serial2.println("Hello!"); + digitalWrite(2, LOW); - for (i = 0; i < sizeof buf0; i++) { - buf0[i + 2] = i & 0xFF; + for (i = 2; i < sizeof buf0; i++) { + buf0[i] = i - 2; } i2c_master_enable(I2C1, 0); @@ -31,6 +41,11 @@ void setup() { i2c_master_xfer(I2C1, msgs, 1); delay(5); +} + +void loop() { + delay(100); + toggleLED(); /* Write slave address to read */ msgs[1].addr = slave_address; msgs[1].flags = 0; @@ -45,11 +60,6 @@ void setup() { i2c_master_xfer(I2C1, msgs + 1, 2); } -void loop() { - toggleLED(); - delay(100); -} - // Force init to be called *first*, i.e. before static object allocation. // Otherwise, statically allocated object that need libmaple may fail. __attribute__(( constructor )) void premain() { diff --git a/wirish/time.c b/wirish/time.c index c0a0649..b5663b0 100644 --- a/wirish/time.c +++ b/wirish/time.c @@ -29,6 +29,7 @@ #include "libmaple.h" #include "systick.h" #include "time.h" +#include "delay.h" void delay(unsigned long ms) { uint32 i; @@ -38,15 +39,5 @@ void delay(unsigned long ms) { } void delayMicroseconds(uint32 us) { - /* So (2^32)/12 micros max, or less than 6 minutes */ - us *= 12; - - /* fudge for function call overhead */ - us--; - asm volatile(" mov r0, %[us] \n\t" - "1: subs r0, #1 \n\t" - " bhi 1b \n\t" - : - : [us] "r" (us) - : "r0"); + delay_us(us); } -- cgit v1.2.3