From c8da1c3b7b6eb450138a00af9bbbee607f596837 Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Mon, 7 Mar 2011 13:11:54 -0500 Subject: [WIP] GPIO refactor: seems ok, ready for review --- libmaple/gpio.h | 391 ++++++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 298 insertions(+), 93 deletions(-) (limited to 'libmaple/gpio.h') diff --git a/libmaple/gpio.h b/libmaple/gpio.h index 53f77c4..48dbc00 100644 --- a/libmaple/gpio.h +++ b/libmaple/gpio.h @@ -3,126 +3,331 @@ * * Copyright (c) 2010 Perry Hung. * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. *****************************************************************************/ /** * @file gpio.h * - * @brief GPIO prototypes, defines, and inlined access functions + * @brief General purpose I/0 (GPIO) and Alternate Function I/O + * (AFIO) prototypes, defines, and inlined access functions. */ -#ifndef _GPIO_H -#define _GPIO_H - -/* Each of the GPIO port bits can be in the following modes (STM32 138/995): - * Input floating - * Input pull-up - * Input pull-down - * Analog Input - * Output open-drain - * Output push-pull - * Alternate function push-pull - * Alternate function open-drain - * - * - After reset, the alternate functions are not active and IO prts - * are set to Input Floating mode, EXCEPT for the Serial Wire and JTAG - * ports, which are in alternate function mode by default. */ - -#define AFIO_MAPR ((volatile uint32*)0x40010004) - -#define GPIOA_BASE ((GPIO_Port*)0x40010800) -#define GPIOB_BASE ((GPIO_Port*)0x40010C00) -#define GPIOC_BASE ((GPIO_Port*)0x40011000) -#define GPIOD_BASE ((GPIO_Port*)0x40011400) -#define GPIOE_BASE ((GPIO_Port*)0x40011800) // High-density devices only -#define GPIOF_BASE ((GPIO_Port*)0x40011C00) // High-density devices only -#define GPIOG_BASE ((GPIO_Port*)0x40012000) // High-density devices only - -#define GPIO_SPEED_50MHZ (0x3) - -#define MODE_OUTPUT_PP ((0x00 << 2) | GPIO_SPEED_50MHZ) -#define MODE_OUTPUT_OD ((0x01 << 2) | GPIO_SPEED_50MHZ) -#define MODE_AF_OUTPUT_PP ((0x02 << 2) | GPIO_SPEED_50MHZ) -#define MODE_AF_OUTPUT_OD ((0x03 << 2) | GPIO_SPEED_50MHZ) - -#define CNF_INPUT_ANALOG (0x00 << 2) -#define CNF_INPUT_FLOATING (0x01 << 2) -#define CNF_INPUT_PD (0x02 << 2) -#define CNF_INPUT_PU (0x02 << 2) - -typedef enum GPIOPinMode { - GPIO_MODE_OUTPUT_PP = MODE_OUTPUT_PP, - GPIO_MODE_OUTPUT_OD = MODE_OUTPUT_OD, - GPIO_MODE_AF_OUTPUT_PP = MODE_AF_OUTPUT_PP, - GPIO_MODE_AF_OUTPUT_OD = MODE_AF_OUTPUT_OD, - GPIO_MODE_INPUT_ANALOG = CNF_INPUT_ANALOG, - GPIO_MODE_INPUT_FLOATING = CNF_INPUT_FLOATING, - GPIO_MODE_INPUT_PD = CNF_INPUT_PD, - GPIO_MODE_INPUT_PU, -} GPIOPinMode; - -typedef struct { - volatile uint32 CRL; // Port configuration register low - volatile uint32 CRH; // Port configuration register high - volatile uint32 IDR; // Port input data register - volatile uint32 ODR; // Port output data register - volatile uint32 BSRR; // Port bit set/reset register - volatile uint32 BRR; // Port bit reset register - volatile uint32 LCKR; // Port configuration lock register -} GPIO_Port; - -typedef volatile uint32* GPIOReg; - -#define POS_MASK(shift) (~(0xF << shift)) -#define POS(val) (val << 2) +#ifndef _GPIO_H_ +#define _GPIO_H_ + +#include "libmaple.h" +#include "rcc.h" #ifdef __cplusplus extern "C"{ #endif -void gpio_init(void); -void gpio_set_mode(GPIO_Port* port, uint8 gpio_pin, GPIOPinMode mode); +/* + * GPIO register maps and devices + */ + +/** GPIO register map type */ +typedef struct gpio_reg_map { + __io uint32 CRL; ///< Port configuration register low + __io uint32 CRH; ///< Port configuration register high + __io uint32 IDR; ///< Port input data register + __io uint32 ODR; ///< Port output data register + __io uint32 BSRR; ///< Port bit set/reset register + __io uint32 BRR; ///< Port bit reset register + __io uint32 LCKR; ///< Port configuration lock register +} gpio_reg_map; + +/** GPIO device type */ +typedef struct gpio_dev { + gpio_reg_map *regs; ///< Register map + rcc_clk_id clk_id; ///< RCC clock information +} gpio_dev; + +/** GPIO port A device */ +extern gpio_dev *GPIOA; +/** GPIO port B device */ +extern gpio_dev *GPIOB; +/** GPIO port C device */ +extern gpio_dev *GPIOC; +/** GPIO port D device */ +extern gpio_dev *GPIOD; +#ifdef STM32_HIGH_DENSITY +/** GPIO port E device */ +extern gpio_dev *GPIOE; +/** GPIO port F device */ +extern gpio_dev *GPIOF; +/** GPIO port G device */ +extern gpio_dev *GPIOG; +#endif + +/** GPIO port A register map base pointer */ +#define GPIOA_BASE ((gpio_reg_map*)0x40010800) +/** GPIO port B register map base pointer */ +#define GPIOB_BASE ((gpio_reg_map*)0x40010C00) +/** GPIO port C register map base pointer */ +#define GPIOC_BASE ((gpio_reg_map*)0x40011000) +/** GPIO port D register map base pointer */ +#define GPIOD_BASE ((gpio_reg_map*)0x40011400) +#ifdef STM32_HIGH_DENSITY +/** GPIO port E register map base pointer */ +#define GPIOE_BASE ((gpio_reg_map*)0x40011800) +/** GPIO port F register map base pointer */ +#define GPIOF_BASE ((gpio_reg_map*)0x40011C00) +/** GPIO port G register map base pointer */ +#define GPIOG_BASE ((gpio_reg_map*)0x40012000) +#endif + +/* + * GPIO register bit definitions + */ + +/* Control registers, low and high */ +#define GPIO_CR_CNF_INPUT_ANALOG (0x0 << 2) +#define GPIO_CR_CNF_INPUT_FLOATING (0x1 << 2) +#define GPIO_CR_CNF_INPUT_PU_PD (0x2 << 2) +#define GPIO_CR_CNF_OUTPUT_PP (0x0 << 2) +#define GPIO_CR_CNF_OUTPUT_OD (0x1 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_PP (0x2 << 2) +#define GPIO_CR_CNF_AF_OUTPUT_OD (0x3 << 2) +#define GPIO_CR_MODE_INPUT 0x0 +#define GPIO_CR_MODE_OUTPUT_10MHZ 0x1 +#define GPIO_CR_MODE_OUTPUT_2MHZ 0x2 +#define GPIO_CR_MODE_OUTPUT_50MHZ 0x3 + +/** GPIO Pin modes. These only allow for 50MHZ max output speeds; if + * you want slower, use direct register access. */ +typedef enum gpio_pin_mode { + GPIO_OUTPUT_PP = (GPIO_CR_CNF_OUTPUT_PP | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output push-pull. */ + GPIO_OUTPUT_OD = (GPIO_CR_CNF_OUTPUT_OD | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Output open-drain. */ + GPIO_AF_OUTPUT_PP = (GPIO_CR_CNF_AF_OUTPUT_PP | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function + output push-pull. */ + GPIO_AF_OUTPUT_OD = (GPIO_CR_CNF_AF_OUTPUT_OD | + GPIO_CR_MODE_OUTPUT_50MHZ), /**< Alternate function + output open drain. */ + GPIO_INPUT_ANALOG = (GPIO_CR_CNF_INPUT_ANALOG | + GPIO_CR_MODE_INPUT), /**< Analog input. */ + GPIO_INPUT_FLOATING = (GPIO_CR_CNF_INPUT_FLOATING | + GPIO_CR_MODE_INPUT), /**< Input floating. */ + GPIO_INPUT_PD = (GPIO_CR_CNF_INPUT_PU_PD | + GPIO_CR_MODE_INPUT), /**< Input pull-down. */ + GPIO_INPUT_PU /**< Input pull-up. */ + /* GPIO_INPUT_PU treated as a special case, for ODR twiddling */ +} gpio_pin_mode; -static inline void gpio_write_bit(GPIO_Port *port, uint8 gpio_pin, uint8 val) { - if (val){ - port->BSRR = BIT(gpio_pin); +/* + * GPIO Convenience routines + */ + +void gpio_init(gpio_dev *dev); +void gpio_init_all(void); +void gpio_set_mode(gpio_dev *dev, uint8 pin, gpio_pin_mode mode); + +/** + * Set or reset a GPIO pin. + * + * Pin must have previously been configured to output mode. + * + * @param dev GPIO device whose pin to set. + * @param pin Pin on to set or reset + * @param val If true, set the pin. If false, reset the pin. + */ +static inline void gpio_write_bit(gpio_dev *dev, uint8 pin, uint8 val) { + if (val) { + dev->regs->BSRR = BIT(pin); } else { - port->BRR = BIT(gpio_pin); + dev->regs->BRR = BIT(pin); } } -static inline uint32 gpio_read_bit(GPIO_Port *port, uint8 gpio_pin) { - return (port->IDR & BIT(gpio_pin) ? 1 : 0); +/** + * Determine whether or not a GPIO pin is set. + * + * Pin must have previously been configured to input mode. + * + * @param dev GPIO device whose pin to test. + * @param pin Pin on dev to test. + * @return True if the pin is set, false otherwise. + */ +static inline uint32 gpio_read_bit(gpio_dev *dev, uint8 pin) { + return dev->regs->IDR & BIT(pin); } -/* For pins configured as output push-pull, reading the ODR returns - * the last value written in push-pull mode. +/** + * Toggle a pin configured as output push-pull. + * @param dev GPIO device. + * @param pin Pin on dev to toggle. */ -static inline void gpio_toggle_pin(GPIO_Port *port, uint8 gpio_pin) { - port->ODR = port->ODR ^ BIT(gpio_pin); +static inline void gpio_toggle_bit(gpio_dev *dev, uint8 pin) { + dev->regs->ODR = dev->regs->ODR ^ BIT(pin); } -#ifdef __cplusplus -} // extern "C" +/* + * AFIO register map + */ + +/** AFIO register map */ +typedef struct afio_reg_map { + __io uint32 EVCR; /**< Event control register. */ + __io uint32 MAPR; /**< AF remap and debug I/O configuration + register. */ + __io uint32 EXTICR1; /**< External interrupt configuration + register 1. */ + __io uint32 EXTICR2; /**< External interrupt configuration + register 2. */ + __io uint32 EXTICR3; /**< External interrupt configuration + register 3. */ + __io uint32 EXTICR4; /**< External interrupt configuration + register 4. */ + __io uint32 MAPR2; /**< AF remap and debug I/O configuration + register 2. */ +} afio_reg_map; + +/** AFIO register map base pointer. */ +#define AFIO_BASE ((afio_reg_map *)0x40010000) + +/* + * AFIO register bit definitions + */ + +/* Event control register */ +#define AFIO_EVCR_EVOE (0x1 << 7) +#define AFIO_EVCR_PORT_PA (0x0 << 4) +#define AFIO_EVCR_PORT_PB (0x1 << 4) +#define AFIO_EVCR_PORT_PC (0x2 << 4) +#define AFIO_EVCR_PORT_PD (0x3 << 4) +#define AFIO_EVCR_PORT_PE (0x4 << 4) +#define AFIO_EVCR_PIN_0 0x0 +#define AFIO_EVCR_PIN_1 0x1 +#define AFIO_EVCR_PIN_2 0x2 +#define AFIO_EVCR_PIN_3 0x3 +#define AFIO_EVCR_PIN_4 0x4 +#define AFIO_EVCR_PIN_5 0x5 +#define AFIO_EVCR_PIN_6 0x6 +#define AFIO_EVCR_PIN_7 0x7 +#define AFIO_EVCR_PIN_8 0x8 +#define AFIO_EVCR_PIN_9 0x9 +#define AFIO_EVCR_PIN_10 0xA +#define AFIO_EVCR_PIN_11 0xB +#define AFIO_EVCR_PIN_12 0xC +#define AFIO_EVCR_PIN_13 0xD +#define AFIO_EVCR_PIN_14 0xE +#define AFIO_EVCR_PIN_15 0xF + +/* AF remap and debug I/O configuration register */ +#define AFIO_MAPR_SWJ_FULL_SWJ (0x0 << 24) +#define AFIO_MAPR_SWJ_FULL_SWJ_NO_NJRST (0x1 << 24) +#define AFIO_MAPR_SWJ_NO_JTAG_SW (0x2 << 24) +#define AFIO_MAPR_SWJ_NO_JTAG_NO_SW (0x4 << 24) +#define AFIO_MAPR_ADC2_ETRGREG_REMAP BIT(20) +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP BIT(19) +#define AFIO_MAPR_ADC1_ETRGREG_REMAP BIT(18) +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP BIT(17) +#define AFIO_MAPR_TIM5CH4_IREMAP BIT(16) +#define AFIO_MAPR_PD01_REMAP BIT(15) +#define AFIO_MAPR_CAN_REMAP (BIT(14) | BIT(13)) +#define AFIO_MAPR_TIM4_REMAP_FULL BIT(12) +#define AFIO_MAPR_TIM3_REMAP (BIT(11) | BIT(10)) +#define AFIO_MAPR_TIM2_REMAP (BIT(9) | BIT(8)) +#define AFIO_MAPR_TIM1_REMAP (BIT(7) | BIT(6)) +#define AFIO_MAPR_USART3_REMAP (BIT(5) | BIT(4)) +#define AFIO_MAPR_USART2_REMAP BIT(3) +#define AFIO_MAPR_USART1_REMAP BIT(2) +#define AFIO_MAPR_I2C1_REMAP BIT(1) +#define AFIO_MAPR_SPI1_REMAP BIT(0) + +/* External interrupt configuration registers */ + +/** + * External interrupt line port selector. Used to determine which + * GPIO port to map an external interrupt line onto. */ +typedef enum { + AFIO_EXTI_PA, /**< Use PAx pin. */ + AFIO_EXTI_PB, /**< Use PBx pin. */ + AFIO_EXTI_PC, /**< Use PCx pin. */ + AFIO_EXTI_PD, /**< Use PDx pin. */ +#ifdef STM32_HIGH_DENSITY + AFIO_EXTI_PE, /**< Use PEx pin. */ + AFIO_EXTI_PF, /**< Use PFx pin. */ + AFIO_EXTI_PG, /**< Use PGx pin. */ #endif +} afio_exti_port; + +/** + * External interrupt line numbers. + */ +typedef enum { + AFIO_EXTI_0, /**< External interrupt line 0. */ + AFIO_EXTI_1, /**< External interrupt line 1. */ + AFIO_EXTI_2, /**< External interrupt line 2. */ + AFIO_EXTI_3, /**< External interrupt line 3. */ + AFIO_EXTI_4, /**< External interrupt line 4. */ + AFIO_EXTI_5, /**< External interrupt line 5. */ + AFIO_EXTI_6, /**< External interrupt line 6. */ + AFIO_EXTI_7, /**< External interrupt line 7. */ + AFIO_EXTI_8, /**< External interrupt line 8. */ + AFIO_EXTI_9, /**< External interrupt line 9. */ + AFIO_EXTI_10, /**< External interrupt line 10. */ + AFIO_EXTI_11, /**< External interrupt line 11. */ + AFIO_EXTI_12, /**< External interrupt line 12. */ + AFIO_EXTI_13, /**< External interrupt line 13. */ + AFIO_EXTI_14, /**< External interrupt line 14. */ + AFIO_EXTI_15, /**< External interrupt line 15. */ +} afio_exti_num; +/* AF remap and debug I/O configuration register 2 */ +#define AFIO_MAPR2_FSMC_NADV BIT(10) +#define AFIO_MAPR2_TIM14_REMAP BIT(9) +#define AFIO_MAPR2_TIM13_REMAP BIT(8) +#define AFIO_MAPR2_TIM11_REMAP BIT(7) +#define AFIO_MAPR2_TIM10_REMAP BIT(6) +#define AFIO_MAPR2_TIM9_REMAP BIT(5) + +/* + * AFIO convenience routines + */ + +void afio_init(void); +void afio_exti_select(afio_exti_num exti, afio_exti_port gpio_port); + +/** + * Set the SWJ_CONFIG bits in the AFIO MAPR register. + * + * @param config Desired SWJ_CONFIG bits setting. One of: + * AFIO_MAPR_SWJ_FULL_SWJ (full SWJ), + * AFIO_MAPR_SWJ_FULL_SWJ_NO_NJRST (full SWJ, no NJTRST), + * AFIO_MAPR_SWJ_NO_JTAG_SW (JTAG-DP disabled, SW-DP enabled), + * AFIO_MAPR_SWJ_NO_JTAG_NO_SW (JTAG-DP and SW-DP both disabled). + */ +static inline void afio_mapr_swj_config(uint32 config) { + __io uint32 *mapr = &AFIO_BASE->MAPR; + *mapr = (*mapr & ~(0x7 << 24)) | config; +} + +#ifdef __cplusplus +} +#endif #endif -- cgit v1.2.3