From 9cfd9ba5d6e2933e72dd93b048e62b9e9494fafb Mon Sep 17 00:00:00 2001
From: Marti Bolivar <mbolivar@leaflabs.com>
Date: Tue, 10 May 2011 16:41:37 -0400
Subject: Converting all files to UNIX newlines.

Committing the results of running the following on the libmaple root
directory:

$ fromdos `grep --exclude-dir='[.]git' -Ilsr $'\r$' .`
---
 examples/test-fsmc.cpp | 250 ++++++++++++++++++++++++-------------------------
 1 file changed, 125 insertions(+), 125 deletions(-)

(limited to 'examples/test-fsmc.cpp')

diff --git a/examples/test-fsmc.cpp b/examples/test-fsmc.cpp
index 7db3bb7..3aa6c6d 100644
--- a/examples/test-fsmc.cpp
+++ b/examples/test-fsmc.cpp
@@ -1,125 +1,125 @@
-#include <stddef.h>             // for ptrdiff_t
-
-#include "wirish.h"
-#include "fsmc.h"
-
-#ifndef BOARD_maple_native
-#error "Sorry, this example only works on Maple Native."
-#endif
-
-// Start of FSMC SRAM bank 1
-static uint16 *const sram_start = (uint16*)0x60000000;
-// End of Maple Native SRAM chip address space (512K 16-bit words)
-static uint16 *const sram_end = (uint16*)0x60080000;
-
-void test_single_write(void);
-void test_all_addresses(void);
-
-void setup() {
-    pinMode(BOARD_LED_PIN, OUTPUT);
-    digitalWrite(BOARD_LED_PIN, HIGH);
-
-    Serial1.begin(115200);
-    Serial1.println("*** Beginning RAM chip test");
-
-    test_single_write();
-    test_all_addresses();
-
-    Serial1.println("Tests pass, finished.");
-}
-
-void loop() {
-}
-
-void test_single_write() {
-    uint16 *ptr = sram_start;
-    uint16 tmp;
-
-    Serial1.print("Writing 0x1234... ");
-    *ptr = 0x1234;
-    Serial1.println("Done.");
-
-    Serial1.print("Reading... ");
-    tmp = *ptr;
-    Serial1.print("Done: 0x");
-    Serial1.println(tmp, HEX);
-
-    if (tmp != 0x1234) {
-        Serial1.println("Mismatch; abort.");
-        ASSERT(0);
-    }
-}
-
-void test_all_addresses() {
-    uint32 start, end;
-    uint16 count = 0;
-    uint16 *ptr;
-
-    Serial1.println("Now writing all memory addresses (unrolled loop)");
-    // Turn off the USB interrupt, as it interferes most with timing
-    // (don't turn off SysTick, or we won't get micros()).
-    SerialUSB.end();
-    start = micros();
-    for (ptr = sram_start; ptr < sram_end;) {
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-        *ptr++ = count++;
-    }
-    end = micros();
-    SerialUSB.begin();
-    Serial1.print("Done. Elapsed time (us): ");
-    Serial1.println(end - start);
-
-    Serial1.println("Validating writes.");
-    for (ptr = sram_start, count = 0; ptr < sram_end; ptr++, count++) {
-        uint16 value = *ptr;
-        if (value != count) {
-            Serial1.print("mismatch: 0x");
-            Serial1.print((uint32)ptr);
-            Serial1.print(" = 0x");
-            Serial1.print(value, HEX);
-            Serial1.print(", should be 0x");
-            Serial1.print(count, HEX);
-            Serial1.println(".");
-            ASSERT(0);
-        }
-    }
-    Serial1.println("Done; all writes seem valid.");
-
-    ptrdiff_t nwrites = sram_end - sram_start;
-    double us_per_write = double(end-start) / double(nwrites);
-    Serial1.print("Number of writes = ");
-    Serial1.print(nwrites);
-    Serial1.print("; avg. time per write = ");
-    Serial1.print(us_per_write);
-    Serial1.print(" us (");
-    Serial1.print(1 / us_per_write);
-    Serial1.println(" MHz)");
-}
-
-__attribute__((constructor)) void premain() {
-    init();
-}
-
-int main(void) {
-    setup();
-
-    while (true) {
-        loop();
-    }
-
-    return 0;
-}
+#include <stddef.h>             // for ptrdiff_t
+
+#include "wirish.h"
+#include "fsmc.h"
+
+#ifndef BOARD_maple_native
+#error "Sorry, this example only works on Maple Native."
+#endif
+
+// Start of FSMC SRAM bank 1
+static uint16 *const sram_start = (uint16*)0x60000000;
+// End of Maple Native SRAM chip address space (512K 16-bit words)
+static uint16 *const sram_end = (uint16*)0x60080000;
+
+void test_single_write(void);
+void test_all_addresses(void);
+
+void setup() {
+    pinMode(BOARD_LED_PIN, OUTPUT);
+    digitalWrite(BOARD_LED_PIN, HIGH);
+
+    Serial1.begin(115200);
+    Serial1.println("*** Beginning RAM chip test");
+
+    test_single_write();
+    test_all_addresses();
+
+    Serial1.println("Tests pass, finished.");
+}
+
+void loop() {
+}
+
+void test_single_write() {
+    uint16 *ptr = sram_start;
+    uint16 tmp;
+
+    Serial1.print("Writing 0x1234... ");
+    *ptr = 0x1234;
+    Serial1.println("Done.");
+
+    Serial1.print("Reading... ");
+    tmp = *ptr;
+    Serial1.print("Done: 0x");
+    Serial1.println(tmp, HEX);
+
+    if (tmp != 0x1234) {
+        Serial1.println("Mismatch; abort.");
+        ASSERT(0);
+    }
+}
+
+void test_all_addresses() {
+    uint32 start, end;
+    uint16 count = 0;
+    uint16 *ptr;
+
+    Serial1.println("Now writing all memory addresses (unrolled loop)");
+    // Turn off the USB interrupt, as it interferes most with timing
+    // (don't turn off SysTick, or we won't get micros()).
+    SerialUSB.end();
+    start = micros();
+    for (ptr = sram_start; ptr < sram_end;) {
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+        *ptr++ = count++;
+    }
+    end = micros();
+    SerialUSB.begin();
+    Serial1.print("Done. Elapsed time (us): ");
+    Serial1.println(end - start);
+
+    Serial1.println("Validating writes.");
+    for (ptr = sram_start, count = 0; ptr < sram_end; ptr++, count++) {
+        uint16 value = *ptr;
+        if (value != count) {
+            Serial1.print("mismatch: 0x");
+            Serial1.print((uint32)ptr);
+            Serial1.print(" = 0x");
+            Serial1.print(value, HEX);
+            Serial1.print(", should be 0x");
+            Serial1.print(count, HEX);
+            Serial1.println(".");
+            ASSERT(0);
+        }
+    }
+    Serial1.println("Done; all writes seem valid.");
+
+    ptrdiff_t nwrites = sram_end - sram_start;
+    double us_per_write = double(end-start) / double(nwrites);
+    Serial1.print("Number of writes = ");
+    Serial1.print(nwrites);
+    Serial1.print("; avg. time per write = ");
+    Serial1.print(us_per_write);
+    Serial1.print(" us (");
+    Serial1.print(1 / us_per_write);
+    Serial1.println(" MHz)");
+}
+
+__attribute__((constructor)) void premain() {
+    init();
+}
+
+int main(void) {
+    setup();
+
+    while (true) {
+        loop();
+    }
+
+    return 0;
+}
-- 
cgit v1.2.3