From d7212508f203d03b4931b94695fb10cb8a7862c2 Mon Sep 17 00:00:00 2001
From: bnewbold <bnewbold@robocracy.org>
Date: Wed, 27 Aug 2014 19:02:33 -0400
Subject: docs: first pass removal of board-specific hardware info

---
 docs/source/libs/servo.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'docs/source/libs')

diff --git a/docs/source/libs/servo.rst b/docs/source/libs/servo.rst
index 549e86f..cc2dac7 100644
--- a/docs/source/libs/servo.rst
+++ b/docs/source/libs/servo.rst
@@ -53,7 +53,7 @@ to attach to pins that support PWM**.
 To determine if a pin supports PWM, you can either check if "PWM"
 appears next to its number on your board's silkscreen, or look for it
 in the list of :ref:`boardPWMPins <lang-board-values-pwm-pins>` in
-your board's :ref:`hardware documentation <index-boards>`.
+your board's hardware documentation.
 
 RC Servos expect a pulse approximately every 20ms.  In the Maple
 implementation, :ref:`periods <lang-hardwaretimer-setperiod>` are set
-- 
cgit v1.2.3