From 1088b37e70e192d2a279bbfc55d33238f090d72e Mon Sep 17 00:00:00 2001 From: Marti Bolivar Date: Mon, 11 Oct 2010 20:02:04 -0400 Subject: more docs --- docs/source/gpio.rst | 89 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 88 insertions(+), 1 deletion(-) (limited to 'docs/source/gpio.rst') diff --git a/docs/source/gpio.rst b/docs/source/gpio.rst index f608a61..2567221 100644 --- a/docs/source/gpio.rst +++ b/docs/source/gpio.rst @@ -4,4 +4,91 @@ GPIO ====== -Stub. +The Maple features 38 ready-to-use general purpose input/output (GPIO) +pins for digital input/output, numbered D0 through D37. These numbers +correspond to the numeric values next to each header on the Maple +silkscreen. + +Many of these pins may additionally be used for special features or +peripheral functions. This page documents those capabilities, by pin. + +The current and voltage limitations have not been copied over from the +STM32 datasheet (see the :ref:`Recommended Reading +` for a link). In particular, a number of +GPIO pins are 5v tolerant (which means that applying 5v to a pin and +reading it as input or allowing it to drain to ground will not damage +that pin), while some are not. + +.. contents:: Contents + :local: + +Pin Mapping Mega Table +---------------------- + +This huge reference table shows the available functionality on every +GPIO pin, by peripheral type. The "STM32" column refers to the port +and number that the header is connected to on the microcontroller. +The "5v?" column documents whether or not the pin is 5v tolerant (see +above). + +.. csv-table:: + :header: "Pin", "STM32", ":ref:`ADC `", ":ref:`Timer `", ":ref:`I2C `", ":ref:`UART `", ":ref:`SPI `", "5v?" + + "D0", "PA3", "ADC3", "TIM2_CH4", "-", "USART2_RX", "-", "No" + "D1", "PA2", "ADC2", "TIM2_CH3", "-", "USART2_TX", "-", "No" + "D2", "PA0", "ADC0", "TIM2_CH1_ETR", "-", "USART2_CTS", "-", "No" + "D3", "PA1", "ADC1", "TIM2_CH2", "-", "USART2_RTS", "-", "No" + "D4", "PB5", "-", "-", "ISC1_SMBA", "-", "-", "No" + "D5", "PB6", "-", "TIM4_CH1", "I2C1_SCL", "-", "-", "Yes" + "D6", "PA8", "-", "TIM1_CH1", "-", "USART1_CK", "-", "Yes" + "D7", "PA9", "-", "TIM1_CH2", "-", "USART1_TX", "-", "Yes" + "D8", "PA10", "-", "TIM1_CH3", "-", "USART1_RX", "-", "Yes" + "D9", "PB7", "-", "TIM4_CH2", "I2C1_SDA", "-", "-", "Yes" + "D10", "PA4", "ADC4", "-", "-", "USART2_CK", "SPI1_NSS", "No" + "D11", "PA7", "ADC7", "TIM3_CH2", "-", "-", "SPI1_MOSI", "No" + "D12", "PA6", "ADC6", "TIM3_CH1", - - SPI1_MISO No + D13 PA5 ADC5 - - - SPI1_SCK No + D14 PB8 - TIM4_CH3 - - - Yes + + Analog header + + D15 PC0 ADC10 - - - - No + D16 PC1 ADC11 - - - - No + D17 PC2 ADC12 - - - - No + D18 PC3 ADC13 - - - - No + D19 PC4 ADC14 - - - - No + D20 PC5 ADC15 - - - - No + + External header + + D21 PC13 - - - - - No + D22 PC14 - - - - - No + D23 PC15 - - - - - No + D24 PB9 - TIM4_CH4 - - - Yes + D25 PD2 - TIM3_ETR - - - Yes + D26 PC10 - - - - - Yes + D27 PB0 ADC8 TIM3_CH3 - - - No + D28 PB1 ADC9 TIM3_CH4 - - - No + D29 PB10 - - I2C2_SCL USART3_TX - Yes + D30 PB11 - - I2C2_SDA USART3_RX - Yes + D31 PB12 - TIM1_BKIN I2C2_SMBAL USART3_CK SPI2_NSS Yes + D32 PB13 - TIM1_CH1N - USART3_CTS SPI2_SCK Yes + D33 PB14 - TIM1_CH2N - USART3_RTS SPI2_MISO Yes + D34 PB15 - TIM1_CH3N - - SPI2_MOSI Yes + D35 PC6 - - - - - Yes + D36 PC7 - - - - - Yes + D37 PC8 - - - - - + + +Stub (unfinished). + +.. _gpio-recommended-reading: + +Recommended Reading +------------------- + +STMicro documentation for STM32F103RB microcontroller: + + * `All `_ + * `Datasheet (pdf) `_ + * `Reference Manual (pdf) `_ -- cgit v1.2.3